Mossloo XJ0811 Budget Bump Bluetooth Speaker User Manual

Shenzhen Mossloo Industrial Co.,Ltd Budget Bump Bluetooth Speaker

User Manual

Budget Bump Bluetooth SpeakerInstruction Manual1 x Budget Bump Bluetooth Speaker 1 x USB to Micro-USB charging cable1 x 3.5 mm Audio Cable1 x Instruction ManualOutput Power: 3WFrequency Response: 150Hz-16kHzDriver: 45mmPower Supply: USB, DC 5V 200mABattery Capacity: 350mAhPlayback time (max vol): 2 HoursBattery Charging Time: 1.5-2 hoursCharging the Speaker: before using the speaker for the first time charge it for at least 2-4 hours.Plug the Micro-USB cable into the input port of the speaker.Plug the opposite USB end into the USB port of a computer or compatible AC wall adapter.The red LED turns on to indicate that the unit is charging.Once fully charged, the red LED turns o.Pairing the Device:Place speaker within 30ft of the Bluetooth enabled device.Slide the ON/OFF button to ON. The blue LED flashes 3 times slowly, then flashes quickly to Please note the following precautions before initial use. Failure to comply may be dangerous and cause damage to your mobile devices.Charge the speaker fully before initial use.Using an incorrect AC power adapter, adapter tip or USB cable can cause damage to both your mobile devices and the headphones.Always recharge the headphones in a well-ventilated area. Do not leave the speaker in hot or cold places.Do not immerse the speaker in water or expose it to moisture or weather conditions.Do not drop, knock, or shake the speaker. Rough handling can damage the internal precision component and its boards.Keep the speaker away from children, this device is not a toy.While charging, the speaker casing may become warm, which is normal as the charging and discharging processes generate heat.Keep the speaker away from fire or other sources of heat. Exposing thespeaker to high temperatures may cause it to explode.Do not short-circuit the speaker, as this may cause damage to the unit.Unauthorized changed or modifications may void your right to use this product.indicate Bluetooth pairing mode.Follow the instructions of your device to search for the speaker.The speaker is called “Budget Bump” If a PIN is required, enter “0000.”Three tones will sound an the blue LED flashes slowly when pairing is complete. Basic instructionsTo turn the speaker on, slide the ON/OFF button to ON.The speaker beeps and a blue LED flashes slowly.The blue LED stays on when playing music.To turn speaker o, slide the ON/OFF button to OFF.LED indicatorCharging: Red LED on Fully Charged: Red LED o Pairing Mode: Blue LED flashes quickly Connected: Blue LED flashes slowly1.a.b.c.2.a.b.••••••••••••c.d.e.3.••••4.----1.2.3.4.•••••••Micro USBLED Red/Blue 3.5mm Audio Input (line-in)Power ON/OFFWhat’s included:Tech SpecificationsButton ControlInstructions:SAFETY PRECAUTIONS:MADE IN CHINA431210/31/16 12:50 PM
FCC STATEMENT :This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Warning: Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate theequipment.NOTE: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposurerequirement. The device can be used in portable exposure conditionwithout restriction.

Navigation menu