Motorola Mobility T56CA1 Portable Cellular/PCS Transceiver (AMPS/TDMA) User Manual CA EX08A

Motorola Mobility LLC Portable Cellular/PCS Transceiver (AMPS/TDMA) CA EX08A

Contents

Exhibit 08a Amendment Users Manual

Download: Motorola Mobility T56CA1 Portable Cellular/PCS Transceiver (AMPS/TDMA) User Manual CA EX08A
Mirror Download [FCC.gov]Motorola Mobility T56CA1 Portable Cellular/PCS Transceiver (AMPS/TDMA) User Manual CA EX08A
Document ID245276
Application IDbFZYBiwnaPmNGe2e4exxew==
Document DescriptionExhibit 08a Amendment Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize180.22kB (2252810 bits)
Date Submitted2002-05-24 00:00:00
Date Available2002-04-08 00:00:00
Creation Date2002-05-14 22:12:06
Producing SoftwareAcrobat PDFWriter 3.02 for Windows NT
Document Lastmod2002-05-14 22:13:55
Document TitleCA-EX08A.PDF
Document Author: wlab00

APPLICANT: MOTOROLA, INC.
FCC ID: IHDT56CA1
INSTRUCTION MANUAL
An updated Users Manual follows:
EXHIBIT 8A
DIGITAL WIRELESS
TELEPHONE
User's Guide >
Welcome
Welcome to the world of Motorola digital wireless
communications! We are pleased that you have chosen the
Motorola 120t wireless phone.
Earpiece
Antenna
Power Key
Voice Key
Record voice notes,
phonebook and
shortcut names.
Headset Jack
Insert headset
accessory.
Right Soft Key
Perform functions
identified by right
display prompt.
Display
Volume Keys
Adjust earpiece
and ringer volume.
Send Key
Send and answer
calls, view recent
dialed calls list.
Left Soft Key
Perform functions
identified by left
display prompt.
End Key
End phone calls,
exit menu system.
Menu Key
Scroll Keys
Move through
menus and lists.
Accessory
Connector Port
Insert charger and
phone accessories.
Microphone
Personal Communications Sector
600 North U.S. Highway 45
Libertyville, Illinois 60048
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States)
1-800-461-4575 (Canada)
www.motorola.com (United States)
www.motorola.ca (Canada)
MOTOROLA, the Stylized M Logo and all other trademarks indicated as
such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off.
TrueSync, Sidekick, Starfish, and the Stylized Starfish Logo are registered
trademarks of Starfish Software, Inc., a wholly owned independent
subsidiary of Motorola, Inc. All other product or service names are the
property of their respective owners.
© 2002 Motorola, Inc. All rights reserved.
Software Copyright Notice
The Motorola products described in this manual may include copyrighted
Motorola and third party software stored in semiconductor memories or
other media. Laws in the United States and other countries preserve for
Motorola and third party software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to distribute or
reproduce the copyrighted software. Accordingly, any copyrighted
software contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in any manner to the
extent allowed by law. Furthermore, the purchase of the Motorola
products shall not be deemed to grant either directly or by implication,
estoppel, or otherwise, any license under the copyrights, patents, or
patent applications of Motorola or any third party software provider,
except for the normal, non-exclusive, royalty-free license to use that
arises by operation of law in the sale of a product.
Manual number: 6809438A79-O
Cover number: 8988485L49-O
✂
Menu Map
Main Menu
• Recent Calls
• Received Calls
• Dialed Calls
• Notepad
• Call Times
• Phonebook
• Datebook
• Quick Dial
• Radio
• Messages
• Create Msg
• Voicemail
• Text Msgs
• Quick Notes
• Outbox
• Drafts
• Ring Styles
• Style
• Style Detail
• My Tones
• Shortcuts
• Voice Notes
• Browser
• Calculator
• Games
• Settings
(see next page)
Note: This is the standard phone
menu layout. You or your service
provider may have changed the
menu layout or changed some
feature names. Not all features
may be available for all users.
For example, the Radio feature on
the main menu (left) is displayed
only when the optional FM Stereo
Radio Headset accessory is
plugged into the accessory
connector port on your phone
(see phone illustration, page 1).
Shortcuts
Change display zoom:
Press M, then
press and hold M
Lock/unlock keypad:
Press M *
Display my phone number:
Press M #
Go to dialed calls list:
Press N
Exit menu system:
Press O
✂
Settings Menu
• Phone Status
• My Tel. Number
• Active Line
• Battery Meter
• Other Information
• Connection
• Incoming Call
• In-Call Setup
• In-Call Timer
• Answer Options
• Security
• Phone Lock
• Lock Keypad
• Lock Application
• Talk Secure
• Restrict Calls
• New Passwords
• Other Settings
• Personalize
• Main Menu
• Keys
• Greeting
• Quick Dial
• Initial Setup
• Time and Date
• Backlight
• Zoom
• TTY Setup
• Scroll
• Animation
• Language
• Battery Save
• Contrast
• DTMF
• Master Reset
• Master Clear
• Network
• Car Settings
• Headset
Contents
Contents
Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Safety and General Information . . . . . . . . . . . . . . . . . . 11
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 19
Turning Your Phone On . . . . . . . . . . . . . . . . . . . . . . . 21
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Seeing Your Phone Number . . . . . . . . . . . . . . . . . . . . 22
About Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Zooming In and Out . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adjusting Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Battery Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . 28
Redialing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using Talk Secure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Returning an Unanswered Call . . . . . . . . . . . . . . . . . 29
Calling an Emergency Number . . . . . . . . . . . . . . . . . 29
Turning Off a Call Alert . . . . . . . . . . . . . . . . . . . . . . . . 30
Canceling an Incoming Call . . . . . . . . . . . . . . . . . . . . 30
Calling With Speed Dial . . . . . . . . . . . . . . . . . . . . . . . 31
Calling With One-Touch Dial . . . . . . . . . . . . . . . . . . . . 31
Contents
Calling a Number In a Text Message . . . . . . . . . . . . . 31
Additional Calling Features . . . . . . . . . . . . . . . . . . . . 32
Using Features While On a Call . . . . . . . . . . . . . . . . . 33
Using Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . 33
Additional On-Call Features . . . . . . . . . . . . . . . . . . . 34
Using the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Navigating to a Feature . . . . . . . . . . . . . . . . . . . . . . . 35
Selecting a Feature Option . . . . . . . . . . . . . . . . . . . . 36
Entering Feature Information . . . . . . . . . . . . . . . . . . . 37
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Choosing a Text Mode . . . . . . . . . . . . . . . . . . . . . . . . 39
Using Tap Method . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Using Symbol Mode . . . . . . . . . . . . . . . . . . . . . . . . . 43
Using iTAP™ Software Predictive Text Entry Method 44
Menu Feature Descriptions . . . . . . . . . . . . . . . . . . . . . 48
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Viewing Received Calls or Dialed Calls . . . . . . . . . . . 59
Using the Notepad . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Viewing and Resetting Call Timers . . . . . . . . . . . . . . 61
Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Viewing Entry Details . . . . . . . . . . . . . . . . . . . . . . . . . 64
Storing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . 65
Storing a PIN Code With the Phone Number . . . . . . 67
Recording a Voice Name For a Phonebook Entry . . . 69
Dialing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . 70
Editing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . 71
Deleting a Phonebook Entry . . . . . . . . . . . . . . . . . . . 71
Setting the Primary Number for a Phonebook Entry . 71
Checking Phonebook Capacity . . . . . . . . . . . . . . . . . 72
Sorting the Phonebook List . . . . . . . . . . . . . . . . . . . . 73
Contents
Datebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Week View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Day View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Event View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Adding a Datebook Event . . . . . . . . . . . . . . . . . . . . . . 77
Changing Event Information . . . . . . . . . . . . . . . . . . . . 77
Copying an Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Deleting an Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Turning the Radio On and Off . . . . . . . . . . . . . . . . . . 80
Tuning a Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Storing a Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Selecting a Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Sending and Receiving Calls With the Radio On . . . . 81
Messages—Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Storing Your Voicemail Number . . . . . . . . . . . . . . . . . 83
Receiving a Voicemail Message . . . . . . . . . . . . . . . . . 84
Listening to a Voicemail Message . . . . . . . . . . . . . . . 84
Messages—Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Setting Up the Text Message Inbox . . . . . . . . . . . . . . 85
Receiving a Text Message . . . . . . . . . . . . . . . . . . . . . 86
Reading, Locking, or Deleting a Text Message . . . . . 87
Storing Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Sending a Text Message . . . . . . . . . . . . . . . . . . . . . . 91
Sending a Quick Note Text Message . . . . . . . . . . . . . 93
Viewing the Status of Sent Text Messages . . . . . . . . . 94
Ring Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Selecting a Ring Style . . . . . . . . . . . . . . . . . . . . . . . . 95
Customizing a Ring Style . . . . . . . . . . . . . . . . . . . . . . 95
Creating Alert Tones . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Setting Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Contents
Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Standard Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . 105
Creating a Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . 105
Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Voice Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Recording a Voice Note . . . . . . . . . . . . . . . . . . . . . . 108
Viewing the Voice Notes List . . . . . . . . . . . . . . . . . . 109
Playing a Voice Note . . . . . . . . . . . . . . . . . . . . . . . . 110
Locking and Unlocking a Voice Note . . . . . . . . . . . . 112
Deleting a Voice Note . . . . . . . . . . . . . . . . . . . . . . . 113
Micro-Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Starting a Micro-Browser Session . . . . . . . . . . . . . . 114
Interacting With Web Pages . . . . . . . . . . . . . . . . . . . 115
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Calculating Numbers . . . . . . . . . . . . . . . . . . . . . . . . 116
Converting Currency . . . . . . . . . . . . . . . . . . . . . . . . 118
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Playing a Game . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Game Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Blackjack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Falling Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Video Poker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Adjusting Your Settings . . . . . . . . . . . . . . . . . . . . . . . 124
Reordering Menu Items . . . . . . . . . . . . . . . . . . . . . . 124
Customizing a Soft Key Function . . . . . . . . . . . . . . . 124
TTY Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Hands-Free Use . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Data Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Connecting Your Phone to an External Device . . . . 131
Sending a Data Call . . . . . . . . . . . . . . . . . . . . . . . . . 134
Receiving a Data Call . . . . . . . . . . . . . . . . . . . . . . . 135
Contents
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Assigning a New Code or Password . . . . . . . . . . . . 137
If You Forget a Code or Password . . . . . . . . . . . . . . 138
Locking and Unlocking Your Phone . . . . . . . . . . . . . 139
Locking and Unlocking Your Keypad . . . . . . . . . . . . 140
Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Activating Talk Secure . . . . . . . . . . . . . . . . . . . . . . . 142
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Programming Instructions . . . . . . . . . . . . . . . . . . . . . 152
Specific Absorption Rate Data . . . . . . . . . . . . . . . . . 154
Additional Health and Safety Information . . . . . . . . 157
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . 173
Export Law Assurances . . . . . . . . . . . . . . . . . . . . . . . 173
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Wireless Phone Safety Tips . . . . . . . . . . . . . . . . . . . . 187
About This Guide
This user guide introduces you to the many features in
your Motorola wireless phone.
Navigating To a Menu Feature
Use the menu system to access your phone’s features.
This guide shows you how to select a menu feature as
follows:
Find the Feature
M > Messages
About This Guide
> Text Msgs
This example shows that you must press M, scroll to
and select Messages, then scroll to and select Text Msgs.
Optional Features
This label identifies an optional network or
subscription-dependent feature that may not be
offered by all service providers in all
geographical areas. Contact your service
provider for more information.
Optional Accessories
This label identifies a feature that requires an
optional Motorola Original™ accessory.
10
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT
OPERATION. READ THIS INFORMATION BEFORE USING
YOUR PHONE.
The information provided in this document supersedes the
general safety information contained in user guides published
prior to July 2000. For information regarding radio use in a
hazardous atmosphere please refer to the Factory Mutual
(FM) Approval Manual Supplement or Instruction Card, which
is included with radio models that offer this capability.
RF Operational Characteristics
Your phone contains a transmitter and a receiver. When it is
ON, it receives and transmits radio frequency (RF) energy.
The phone operates in the frequency range of 824 MHz to
849 MHz in analog and digital mode and 1850 MHz to 1910
MHz in digital mode.
When you communicate with your phone, the system handling
your call controls the power levels at which your phone
transmits. The output power level typically may vary over a
Safety and General Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
11
range from 0.00 watts to 0.35 watts in analog mode and 0.00
watts to 0.56 watts in digital mode.
Exposure To Radio Frequency Energy
Your Motorola phone is designed to comply with the following
national and international standards and guidelines regarding
exposure of human beings to radio frequency electromagnetic
energy:
• United States Federal Communications Commission,
Code of Regulations; 47 CFR part 2 sub-part J
• American National Standards Institute (ANSI) / Institute
of Electrical and Electronic Engineers (IEEE) C95.
1-1992
• Institute of Electrical and Electronic Engineers (IEEE)
C95.1-1999 Edition
Safety and General Information
• National Council on Radiation Protection and
Measurements (NCRP) of the United States, Report
86, 1986
12
• International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998
• Ministry of Health (Canada) Safety Code 6. Limits of
Human Exposure to Radiofrequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999
• Australian Communications Authority
Radiocommunications (Electromagnetic
Radiation-Human Exposure) Standard 1999
To assure optimal phone performance and make sure human
exposure to radio frequency electromagnetic energy is within
the guidelines set forth in the above standards, always adhere
to the following procedures:
Portable Phone Operation and EME Exposure
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may violate FCC
regulations.
Do NOT hold the antenna when the phone is in use.
Holding the antenna affects call quality and may cause the
phone to operate at a higher power level than needed.
Phone Operation
When placing or receiving a phone call, hold your phone
as you would a wireline telephone. Speak directly into
the microphone.
Body-Worn Operation
Safety and General Information
To maintain compliance with FCC/Health Canada RF
exposure guidelines, if you wear a phone on your body when
transmitting, always place the phone in a Motorola-supplied or
approved clip, holder, holster, case, or body harness for this
product. Use of non-Motorola-approved accessories may
exceed FCC/Health Canada RF exposure guidelines. If you
do not use one of the Motorola-supplied or approved
body-worn accessories, and are not using the phone held in
the normal use position, ensure the phone and its antenna
are at least one inch (2.5 centimeters) from your body
when transmitting.
13
Data Operation
When using any data feature of the phone, with or without an
accessory cable, position the phone and its antenna at
least one inch (2.5 centimeters) from your body.
Approved Accessories
For a list of approved Motorola accessories, visit our website
at www.mot.com.
Electromagnetic Interference/Compatibility
Note: Nearly every electronic device is susceptible to
electromagnetic interference (EMI) if inadequately shielded,
designed, or otherwise configured for electromagnetic
compatibility.
Safety and General Information
Facilities
14
To avoid electromagnetic interference and/or compatibility
conflicts, turn off your phone in any facility where posted
notices instruct you to do so. Hospitals or health care facilities
may be using equipment that is sensitive to external RF
energy.
Aircraft
When instructed to do so, turn off your phone when on board
an aircraft. Any use of a phone must be in accordance with
applicable regulations per airline crew instructions.
Medical Devices
Pacemakers
The Advanced Medical Technology Association recommends
that a minimum separation of 6 inches (15 centimeters) be
maintained between a handheld wireless phone and a
pacemaker. These recommendations are consistent with the
independent research by, and recommendations of, the
United States Food and Drug Administration.
Persons with pacemakers should:
• ALWAYS keep the phone more than six inches
(15 centimeters) from your pacemaker when the phone is
turned ON.
• NOT carry the phone in the breast pocket.
• use the ear opposite the pacemaker to minimize the
potential for interference.
• turn OFF the phone immediately if you have any reason
to suspect that interference is taking place.
Hearing Aids
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from RF energy. Your physician may be able to assist
you in obtaining this information.
Safety and General Use While Driving
Check the laws and regulations on the use of phones in the
area where you drive. Always obey them.
Safety and General Information
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
want to consult your hearing aid manufacturer to discuss
alternatives.
15
When using your phone while driving, please:
• give full attention to driving and to the road.
• use hands-free operation, if available.
• pull off the road and park before making or answering a
call if driving conditions so require.
Operational Warnings
For Vehicles With an Air Bag
Do not place a portable phone in the area over an air bag or in
the air bag deployment area. Air bags inflate with great force.
If a portable phone is placed in the air bag deployment area
and the air bag inflates, the phone may be propelled with
great force and cause serious injury to occupants of the
vehicle.
Safety and General Information
Potentially Explosive Atmospheres
16
Turn off your phone prior to entering any area with a
potentially explosive atmosphere, unless the phone is a model
specifically identified as being “Intrinsically Safe.” Do not
remove, install, or charge batteries in such areas. Sparks in a
potentially explosive atmosphere can cause an explosion or
fire resulting in bodily injury or even death.
Note: The areas with potentially explosive atmospheres
referred to above include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, areas
where the air contains chemicals or particles, such as grain,
dust, or metal powders, and any other area where you would
normally be advised to turn off your vehicle engine. Areas with
potentially explosive atmospheres are often but not always
posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn
OFF your phone when you are near electrical blasting caps, in
a blasting area, or in areas posted: “Turn off two-way radio.”
Obey all signs and instructions.
Operational Cautions
Antennas
Do not use any portable phone that has a damaged
antenna. If a damaged antenna comes into contact with your
skin, a minor burn can result.
Batteries
ITC01-101
Safety and General Information
All batteries can cause property damage and/or bodily
injury such as burns if a conductive material such as
jewelry, keys, or beaded chains touches exposed
terminals. The conductive material may complete an
electrical circuit (short circuit) and become quite hot. Exercise
care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal
objects.
17
Getting Started
What’s in the Box?
Your wireless phone typically comes equipped with a
battery and a charger. Other accessory options can
customize your phone for maximum performance and
portability.
Getting Started
To purchase Motorola Original™ accessories, contact the
Motorola Customer Call Center at 1-800-331-6456 in the
United States or 1-800-461-4575 in Canada.
Installing the Battery
You must install and charge the battery to use your phone.
Your phone is designed to be used only with
Motorola Original batteries and accessories. We
recommend that you store batteries in their
protective cases when not in use.
Do This
1 Remove the battery from its protective clear
plastic case.
18
Do This
2 If necessary, slide
down the battery
door release latch
and lift the door off
of the phone.
Release
latch
4 Replace the battery door.
Charging the Battery
Getting Started
3 Insert the battery,
printed arrows
first, into the top of
the battery
compartment and
push down.
New batteries are shipped partially charged. Before
you can use your phone, you need to install and charge
the battery, as indicated by the following instructions.
19
Some batteries perform best after several full charge/
discharge cycles.
Getting Started
Do This
1 Plug the
travel
charger into
your phone
with the
release tab
facing up.
Release
tab
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates that the battery is
fully charged (Charge Complete), press the
release tab and remove the travel charger.
Notes:
• When you charge the battery, the battery level
indicator in the upper right corner of the display
shows how much of the charging process is
complete.
• If the battery charge drops too low, your phone
may power off during a call, even when the charger is
connected. To avoid this possibility, do not make calls
while charging the battery.
20
Turning Your Phone On
Do This
1 Press and hold P
To
turn on your phone
Power
key
unlock your phone
The unlock code is
originally set to 1234. Your
service provider may
change this number
before you receive your
phone.
Making a Call
Press
1 keypad keys
To
dial the phone number
2 N
Tip: If you make a mistake,
press DELETE (-) to delete
the last digit, or press and
hold DELETE (-) to clear all
digits.
make the call
Getting Started
2 If necessary, enter
your four-digit
unlock code and
press OK (+)
21
Ending a Call
Press
To
end the call
Answering a Call
When you receive a call, your phone rings and/or vibrates
and displays an incoming call message.
Getting Started
Press
N or ANSWER (+)
Tip: If your phone is locked, you must unlock it to answer
the call.
Seeing Your Phone Number
Press
M#
22
To
answer the call
To
see your phone number
About Your Phone
See page 1 for a basic phone diagram.
Using the Display
➌ In Use
Indicator
➋ Digital/
Analog
Signal
Indicator
➊ Signal
Strength
Indicator
➎ Message ➏ Voice
Waiting
Message
Indicator
Waiting
Indicator
5èO,X&E
w 12:00am P
PH.BOOK
M MESSAGE
➒ Menu
Indicator
➐ Battery
Level
Indicator
➑ Active
line
Indicator
Clock
Soft Key Labels
The idle display is the standard display that you see when
you are not on a call or using the menu.
About Your Phone
➓ Ring Style
Indicator
➍ Roam
Indicator
Labels at the bottom corners of the display show the
current soft key functions. A M (menu) indicator at the
bottom center of the display indicates that you can
press M to enter the main menu.
23
➊ Signal Strength Indicator Vertical bars show the
strength of the network connection. You cannot make or
receive calls when the j (no signal) indicator is displayed.
➋ Digital (F) or Analog (I) Signal
Indicator Shows whether you are receiving a
digital or analog signal.
➌ In Use Indicator Shows that a call is in progress.
➍ Roam Indicator Shows that your phone is
seeking or using another network system
outside your home network.
➎ Message Waiting Indicator Appears when
you receive a text message.
About Your Phone
➏ Voice Message Waiting Indicator Appears
when you receive a voicemail message.
➐ Battery Level Indicator Vertical bars show the battery
charge level. Recharge the battery when you see
Low Battery and hear the low battery alert.
➑ Active Line Indicator Shows the current
active phone line.
➒ Menu Indicator Indicates that you can press M
to enter the main menu or open a feature sub-menu.
24
➓ Ring Style Indicator Shows the ring style setting.
w = loud ring
y = vibrate
t = silent
x = soft ring
u = vibrate and ring
Zooming In and Out
Press and release M, then press and hold M to zoom
in and out on the display. Zoom in to increase text size,
zoom out to display more information.
You can also zoom in and out from the menu. See
page 55.
Adjusting
Volume
• increase and
decrease earpiece
volume during a call
Volume
keys
• increase and decrease the ringer volume setting
when the idle display is visible
About Your Phone
Press the up and down
volume keys to:
Battery Use
Battery performance depends on many factors,
including your wireless carrier’s network configuration;
signal strength; the temperature at which you operate your
25
phone; the features and/or settings you select and use;
and your voice, data, and other application usage patterns.
Battery Care
Caution: To prevent injuries or burns, do not allow metal
objects to contact or short-circuit the battery terminals.
To maximize your battery’s performance:
• Always use Motorola Original™ batteries and battery
chargers. The phone warranty does not cover damage
caused from using non-Motorola batteries and/or
battery chargers.
• New batteries or batteries that have been stored for
long periods of time may require a longer charge time.
About Your Phone
• Maintain the battery at or near room temperature
when charging.
26
• Do not expose batteries to temperatures below
-10°C (14°F) or above 45°C (113°F). Always take your
phone with you when you leave your vehicle.
• When you do not intend to use a battery for a while,
store it uncharged in a cool, dark, dry place, such as a
refrigerator.
• Over extended periods of time, batteries gradually
wear down and require longer charging times. This is
normal. If you charge your battery regularly and
notice a decrease in talk time or an increase in
charging time, then it is probably time to purchase
a new battery.
The rechargeable batteries that power this
product must be disposed of properly and may
need to be recycled. Refer to your battery’s label
for battery type. Contact your local recycling center for
proper disposal methods. Never dispose of batteries in a
fire because they may explode.
Extending Battery Life
• Turn off your display backlight
The backlight uses power. To turn it off, see page 55.
• Minimize keypad-intense functions
Activities that require intensive keystroke use (such as
playing a game or using messaging) reduce your
phone’s talk and standby time. Lock the keypad when
storing the phone in your purse or pocket to avoid
unnecessary keypad and backlight activations. See
page 140.
About Your Phone
27
Making and
Answering Calls
Making and Answering Calls
For basic instructions on how to make a call, end a call,
and answer a call, see pages 21–22.
Redialing a Number
If you hear an ordinary busy signal:
Press
1 O
2 N
To
hang up
redial the busy number
Using Caller ID
Calling line identification (caller ID) displays the
phone number for incoming calls.
The phone displays the caller’s name when the
name is stored in your phonebook, or
Incoming Call when caller ID information is not available.
Using Talk Secure
When talk secure is activated, your phone always tries to
use a high-security connection to prevent others from
intercepting your calls. To activate talk secure, see
page 142.
28
If a high-security connection is not available, your phone
uses a standard connection and displays Line Not Secure.
This message does not appear when caller ID or other
information is displayed.
Returning an Unanswered
Call
• the T (missed call) indicator
• X Missed Calls Y Unknown, where X is the total
number of missed calls and Y is the number of missed
calls with no caller ID information
Press
1 VIEW (+)
3 N
To
see the received calls list
select a call to return
Making and Answering Calls
Your phone keeps a record of your unanswered calls, and
displays:
make the call
Calling an Emergency Number
Your service provider programs one or more emergency
phone numbers, such as 911, that you can call under any
circumstances, even when your phone is locked.
Note: Emergency numbers vary by country. Your phone’s
preprogrammed emergency number(s) may not work in all
locations, and sometimes an emergency call cannot be
29
placed due to network, environmental, or interference
issues.
Making and Answering Calls
Press
1 keypad keys
2 N
To
dial the emergency number
call the emergency number
Turning Off a Call Alert
You can turn off your phone’s incoming call alert before
answering the call.
Press
either volume key
To
turn off the alert
Canceling an Incoming Call
While the phone is ringing or vibrating:
Press
O or IGNORE (-)
To
cancel the incoming call
Depending on your phone settings and/or
service subscription, the call may be forwarded
to another number, or the caller may hear a
busy signal.
30
Calling With Speed Dial
Each entry you store in your phonebook is assigned a
unique speed dial number. To speed dial a phonebook
entry:
Press
1 keypad keys
3 N
call the entry
Calling With One-Touch Dial
To call phonebook entries 1 through 9, just press and hold
the one-digit speed dial number for one second.
We recommend that you reserve phonebook entry 1
(speed dial number 1) for storing and dialing your
voicemail number. In many cases, your service provider
has already done this for you. If necessary, see page 65 to
store your voicemail number for one-touch dial access.
Making and Answering Calls
2 #
To
enter the speed dial number
for the entry you want to call
submit the number
Calling a Number In a Text
Message
To call a phone number embedded in a text
message that you receive:
31
Press
1 M
Making and Answering Calls
3 SELECT (+)
To
open the Text Msg Menu
scroll to Call Back
call the number
Additional Calling Features
While dialing (with digits visible in the display), open the
Dialing Menu to perform the following tasks:
Press
> Attach Number
> Send Message
To
attach a number from the
phonebook or recent call lists
open a new text message
with the number in the To field
You can also call a number using these features:
Do This
Press and release the voice
key, then say a voice name
Voice
key
Press M > Recent Calls
> Received Calls or
Dialed Calls > entry to call
32
To Call
a phonebook entry
using voice dial
To record a voice
name, see page 69.
a missed call, or a
recent received or
dialed call
Using Features While
On a Call
Using Call Waiting
When you are on a call, an alert tone sounds to
indicate that you have received a second
call.
To
answer the new call
switch back to the first call
Making a Three-Way Call
During a call, you can call and connect a third
party for a three-way call. You cannot do this if
you already have a call on hold.
Press
1 keypad keys
2 N
3 N
4 O
To
dial the third party’s number
call the number
connect the two calls
end the entire call
Using Features While On a Call
Press
1 N
2 N
33
Additional On-Call Features
Press
MUTE (+) (if available) or
M > Mute
SPEAKER (+) (if available)
or M > Spkrphone On
M > My Tel. Number
Using Features While On a Call
M > Send Tones
34
To
mute the call
activate an attached
speakerphone during an
active call
see your phone number
send a number to the
network as DTMF tones,
for credit card or
password calls
To activate DTMF tones,
see the “DTMF” option
on page 56.
M > Received Calls or view recent received or
Dialed Calls
dialed call numbers
M > Messages
view or send messages
M > Datebook
view datebook entries
view phone
> Other Information
specifications
Using the Menu
Navigating to a Feature
Use these keys to move through the menu system:
Left Soft Key
Perform the
function shown
in the lower left
corner of the
display (usually
EXIT or BACK).
End Key
Exit the menu
system without
making changes,
return to the
idle display.
Scroll Keys
Scroll up or
down through
menus and lists.
* and #
Using the Menu
Menu Key
Enter the menu
system, or open
a sub-menu,
when M
appears in the
bottom center
of the display.
Main Menu
) Recent Calls
) Phonebook
)EXIT)
SELECT
Right Soft Key
Perform the
function shown
in the lower
right corner of
the display
(usually SELECT
the highlighted
menu item).
Cycle through
and set the
value of the
highlighted
menu item.
35
Selecting a Feature Option
Some features require you to select an item from a list:
Press
BACK (-)
to go back to
the previous
screen.
Dialed Calls
10) John Smith
9) Mary Smith
BACK
Press M to
open the sub-menu.
Highlighted
item
VIEW
Press VIEW (+) to view
details of the highlighted item.
• Press S to scroll up or down to highlight the item
you want.
Using the Menu
• In a numbered list, press a number key to highlight the
item.
36
• In an alphabetized list, press a key multiple times to
cycle through the letters on the key and highlight the
closest matching list item.
Entering Feature Information
Some features require you to enter information:
Press S to
scroll down
to additional
items.
Entry Details
Name:John Smith
No.:2125551212
CANCEL
Press CANCEL (-) to exit
without making changes.
DONE (-) appears when
you enter or edit information.
Highlighted
item
CHANGE
Press
CHANGE (+)
to edit the
information.
• Enter numbers or text with the keypad.
• When an item has a list of possible values, press
* or # to scroll through and select a value.
• If you enter or edit information and do not want to save
your changes, press O to exit without saving.
Using the Menu
• When an item has a list of possible numeric values,
press a number key to set the value.
37
The message center lets you compose and send text
messages. A flashing cursor shows where text will appear:
Flashing
cursor
indicates
insertion
point.
Press
BROWSE (+)
to view and
insert a
quick note.
Msg:
CANCEL
M BROWSE
Press CANCEL (-) to exit
without making changes.
Press M to open
the sub-menu.
Using the Menu
When you enter text using the standard tap method, the
flashing cursor changes to a block cursor, and the soft
key functions change:
38
Block
cursor
indicates
current
highlighted
character.
Msg:
DELETE
After two seconds, the
block cursor reverts to a
flashing cursor and moves
to the next position.
OK
Press
OK (+)
to accept
and store
the text.
Press DELETE (-)
to delete the character
to the left of the insertion
point.
Entering Text
Multiple text entry methods make it easy for you to enter
names, numbers, and messages on your phone.
Choosing a Text Mode
Press M from any text entry screen to select a text
mode:
iTAP
Let the phone predict each word as you
enter it. See page 44.
pressing a key one or more times. See
page 40.
Numeric
Enter numbers only.
Symbol
Enter symbols only. See page 43.
Browse
Browse your phonebook or recent call
lists to select a name or number.
Entering Text
Tap Method Enter letters, numbers, and symbols by
Note: The text mode you select remains active until
you change it by selecting another mode.
39
Using Tap Method
This is the standard mode for entering text on your phone.
Entering Text
Press M from any text entry screen and select the
Tap Method menu option.
40
Do This
1 Press a number
key one or more
times
2 Continue
pressing number
keys
To
select a letter, number, or
symbol shown in the
“Character Chart” on page 42
enter the remaining
characters
3 Press OK (+)
store the text when you are
finished
General Text Entry Rules
Press a number key repeatedly to cycle through its
characters. See “Character Chart” on page 42.
Press and hold
a number key
to cycle
between text
entry modes.
)Msg
)CANCEL)
BROWSE
Change
letter in
block cursor
to uppercase
or lowercase.
Entering Text
Press a number
key as many
times as
necessary
to enter the
desired
character at
flashing cursor
location.
Move flashing
cursor to the
left or right in
text message.
• If you do not press a key for two seconds, the
character in the block cursor is accepted, and the
cursor moves to the next position.
41
• The first character of every sentence is capitalized.
(Press S down to force the character to lowercase
while it is highlighted by the block cursor).
• Your phone may support multiple languages. The
current language setting determines whether a new
message begins on the left or right side of the display.
You can switch languages within a message. Press
M to select the text mode and language you want to
use.
Entering Text
Character Chart
Use this chart as a guide for entering spaces, letters,
numbers, and symbols with the tap method.
space . 1 ? ! , @ _ & ~ : ; " ( ) ' ¿ ¡ % £ $ ¥
a b c 2 á à â ã ç
d e f 3 é è ê ë
g h i 4 í î ï
j k l 5
m n o 6 ñ ó ô õ
p q r s 7
t u v 8 θ ü ú ù û
w x y z 9
+ - 0 x * / \ [ ] = > < # §
Note: This chart may not reflect the exact character set
available on your phone.
42
Using Symbol Mode
Your phone provides an alternate way to enter symbol
characters in a message. Press M from any text entry
screen and select the Symbol menu option.
Do This
1 Press a number
key one time
To
display its symbol options at
the bottom of the display
See “Symbol Chart” on
page 43.
2 Press * or # highlight the symbol you want
or
enter the symbol at the
flashing cursor location
Entering Text
Press the
number key
multiple times
3 Press
SELECT (+)
Symbol Chart
Use this chart as a guide for entering characters in
symbol mode.
space . ? ! , @ _ &
~ : ; " - ( ) ' ¿ ¡ %
£ $ ¥
@ _ \ α β
/ : ; δ φ
" & ' γ
43
5
( ) [ ] { } λ
¿ ¡ ~ ω
< > = π ß σ
$ £ ¥
θ
# % * ξ ψ
+ - x * / = > < # §
Using iTAP™ Software
Predictive Text Entry Method
Entering Text
iTAP™ software provides a predictive text entry method
that lets you enter a word using one keypress per letter.
Press M from any text entry screen and select the iTAP
menu option.
Enter Words
Do This
1 Press a number
key one time
2 Press number
keys (one per
letter)
44
To
enter the first letter of the
word
The letters associated with
the key are shown at the
bottom of the display.
enter the rest of the word
Alternative words and letter
combinations are shown at
the bottom of the display. The
word choices are updated
with each keypress.
Do This
3 Press * or #
4 Press
SELECT (+)
To
highlight the word you want
enter the word at the flashing
cursor location
A space is automatically
inserted after the word.
For example, to spell the word “act,” press 2 2 8.
The display shows:
Press S to
scroll and see
additional word
choices.
Act Cat Bat Abu
DELETE
Press DELETE (-)
to clear the last letter.
SELECT
Press SELECT (+) to
insert the highlighted word.
Entering Text
Flashing
cursor
indicates
insertion
point.
Enter Novel Words
You may enter a word that the iTAP software does not
recognize. If the word you want is not displayed:
Do This
1 Press DELETE (-)
one or more times
To
delete letters until you
see a letter combination
that matches the start of
the word
45
Do This
2 Press * or #
3 Press SELECT (+),
then press *
4 Continue to enter
letters and highlight
letter combinations
To
highlight the letter or
letter combination
shift the text entry cursor
to the left and “lock” the
selected word portion
spell the word
Entering Text
Punctuation
Press
0 or 1
To
enter punctuation or other
characters as shown in the
“Character Chart” on page 42
Capitalization
The first word of a sentence is automatically
capitalized, with following words in lowercase.
Press
46
To
change the words to initial
character capitalized, all
uppercase characters, or all
lowercase characters
Enter Numbers
Do This
1 Enter the first
digit and then
highlight it
2 Press number
keys
3 Press
SELECT (+)
To
put the iTAP software in
number entry mode
add digits to the number
enter the number at the
flashing cursor location
Delete Letters and Words
Do This
Press DELETE (-)
To
delete one letter at a time
Hold DELETE (-)
delete the entire message
Entering Text
Place the cursor to the right of the text you want to delete,
and then do the following:
47
Menu Feature
Descriptions
This chapter describes all of your phone’s features in order
of the menu map shown on pages 3–4.
Main Menu
RECENT CALLS
Received Calls
M > Recent Calls
Menu Feature Descriptions
> Received Calls
View a list of recently received calls. See page 59.
Dialed Calls
M > Recent Calls
> Dialed Calls
View a list of recently dialed calls. See page 59.
Notepad
M > Recent Calls
> Notepad
Call or store the last number entered on the keypad.
See page 61.
Call Times
M > Recent Calls
> Call Times
View call timers that track time spent on
your last call, dialed calls, received calls,
all calls since reset, and all calls total. See page 61.
PHONEBOOK
M > Phonebook
Store names and numbers as entries in your
phonebook, then call numbers by selecting them
from the phonebook list. See page 64.
48
DATEBOOK
M > Datebook
Use the datebook calendar to schedule and review
your appointments. See page 75.
QUICK DIAL
M > Quick Dial
Dial pre-programmed numbers. Your
service provider may program your phone
with one or more quick dial numbers, such
as the customer service number. You can call them
by selecting them from the quick dial list.
Note: Your service provider may use a different
name for this feature.
MESSAGES
M > Messages
Adjust message settings, view and
manage the various types of messages
your phone can receive and/or send:
Create Msg
Create new text messages.
See page 91.
Voicemail
Listen to your recorded
voice messages. See
page 83.
Menu Feature Descriptions
RADIO
M > Radio
Listen to FM radio stations with the optional
Motorola Original™ FM Stereo Radio
Headset accessory. This menu feature is
displayed only when the FM Stereo Radio Headset
is plugged into the accessory connector port on
your phone. See page 80.
49
Text Msgs
Read and manage text
messages. See page 85.
Quick Notes
Select and send pre-written
messages from the quick
notes list. See page 93.
Outbox
View all outgoing text
messages, delivered and
undelivered.
Drafts
Store and edit text
messages that you have
written but not sent.
Menu Feature Descriptions
RING STYLES
Style
M > Ring Styles
> Style
Select the ring style your phone uses to notify you
of incoming calls, messages, or other events. See
page 95.
Style Detail
M > Ring Styles
> Style Detail
Change details about the current ring style. Style
represents the name of the ring style. See page 95.
My Tones
M > Ring Styles
> My Tones
Create custom alert tones for your phone. See
page 97.
SHORTCUTS
M > Shortcuts
Create keypad or voice shortcuts to menu features.
See page 105.
50
VOICE NOTES
M > Voice Notes
Use the voice key to record messages and phone
calls. See page 108.
Note: Recording phone calls is subject to varying
state and federal laws regarding privacy and
recording of conversations.
BROWSER
M > Browser
Access Web pages and run Web-based
applications. The micro-browser delivers
WAP (Wireless Application Protocol)
pages from your service provider directly to your
phone. See page 114.
GAMES
M > Games
Play games on your phone. See page 119.
Settings Menu
PHONE STATUS
My Tel. Number
M > Settings
> Phone Status
> My Tel. Number
View, enter, and edit information about your
name and phone number.
Menu Feature Descriptions
M > Calculator
CALCULATOR
Use your phone as a calculator or currency
converter. See page 116.
51
Active Line
M > Settings
> Phone Status
> Active Line
Change the active phone line to send and receive
calls from either of the available numbers.
Battery Meter
M > Settings
> Phone Status
> Battery Meter
View a detailed battery charge meter.
Menu Feature Descriptions
Other Information M > Settings
> Phone Status
> Other Information
View your phone’s feature specifications
(if available from the service provider).
CONNECTION
Connect your phone to a computer or
hand-held device to send and receive data
calls on the connected device. See
page 131.
Incoming Call
M > Settings
> Connection
> Incoming Call
Specify the format for the next incoming call. You
can select Data In Only or Normal. See page 135.
IN- CALL SETUP
Set the features that are active during a call, such
as the in-call timer and call answering options.
52
In-Call Timer
M > Settings
> In-Call Setup
> In-Call Timer
Adjust call timer Display and Beep settings. You can
set your timer to beep at a selected interval during
your calls. (60 seconds is the default.) You can also
turn on or off a display timer during calls as follows:
Time
Display the elapsed time for
the current call.
Off
No in-call timer display.
Answer Options
M > Settings
Multi-Key
SECURITY
Phone Lock
Answer by pressing any key.
M > Settings > Security
> Phone Lock
Lock and unlock your phone. See page 139.
Lock Keypad
M > Settings > Security
> Lock Keypad
View instructions on how to lock and unlock your
keypad. See page 140.
Lock Application
Menu Feature Descriptions
> In-Call Setup
> Answer Options
Turn call answering options on or off:
M > Settings > Security
> Lock Application
Lock and unlock specific phone applications
(such as phonebook or datebook). When an
application is locked, users must enter the unlock
code to use the application.
53
Talk Secure
M > Settings > Security
> Talk Secure
Activate a secure connection to prevent others from
intercepting your calls. See pages 28 and 142.
Restrict Calls
M > Settings > Security
> Restrict Calls
Restrict incoming and outgoing calls. See
page 140.
New Passwords
M > Settings > Security
Menu Feature Descriptions
> New Passwords
Change your unlock code (originally set to 1234) or
your security code (originally set to 000000). See
page 137.
54
OTHER SETTINGS
Personalize
M > Settings
> Other Settings
> Personalize
Set several personal phone options:
Main Menu
Change the order of the
main menu. See page 124.
Keys
Change the functions of the
soft keys in the idle display.
See page 124.
Greeting
Change the text
displayed when
you turn on your
phone.
Quick Dial
Initial Setup
Change quick dial
number(s).
M > Settings
> Other Settings
> Initial Setup
Set many basic phone options:
Set the phone’s time and
date.
Backlight
Set the amount of time that
the display backlight
remains on, or turn off the
backlight to conserve
battery power.
Zoom
Switch between three lines
(Zoom Out) and two lines
(Zoom In) of display text.
TTY Setup
Set your phone to
operate in one of
three TTY modes,
or return to normal
Voice mode. See page 125.
Scroll
Force the cursor to stop or
wrap around when it
reaches the top or bottom of
a list in the display.
Menu Feature Descriptions
Time and Date
55
Menu Feature Descriptions
56
Animation
Turn animation off (to
conserve battery power) or
on. Animation makes your
phone’s menus move
smoothly as you scroll up
and down.
Language
Set the language for phone
menus.
Battery Save
Adjust the phone’s power
usage characteristics to
conserve power.
Contrast
Adjust the contrast setting
for your display.
DTMF
Your phone can send a
number to the network as
dual tone multi-frequency
(DTMF) tones. DTMF tones
are used to communicate
with automated systems
that require you to enter a
number such as a code,
password, or credit card
number. Use this option to
set DTMF tones on or off.
Master Reset
Reset all options back to
their original factory settings
except for the unlock code,
security code, and lifetime
timer.
Master Clear
Reset all options back to
their original factory settings
except for the unlock code,
security code, and lifetime
timer, and clear all user
settings and entries.
Note: This option erases all
user-entered information
stored in your phone’s
memory, including
phonebook and datebook
entries. Once you erase the
information, it cannot be
recovered.
M > Settings
> Other Settings
> Network
View and adjust your phone’s network
settings.
Your service provider registers your phone to a
network. You can view information about the current
network, change how your phone searches for a
network, and activate alerts that indicate when a
call is dropped or network registration changes.
Car Settings
Menu Feature Descriptions
Network
M > Settings
> Other Settings
> Car Settings
Adjust hands-free car kit settings.
You can set your phone to route calls directly to the
car kit when it detects a connection, and
57
automatically answer calls after two rings. See
page 127.
Note: The use of wireless devices and their
accessories may be prohibited or restricted in
certain areas. Always obey the laws and regulations
on the use of these products.
Headset
M > Settings
Menu Feature Descriptions
> Other Settings
> Headset
Set your phone to automatically answer
calls after two rings when connected to a headset.
See page 127.
58
Recent Calls
Viewing Received Calls or
Dialed Calls
Shortcut: Press N to go directly to the dialed calls list
from the idle display.
Find the Feature
Press
2 SELECT (+)
Recent Calls
Your phone keeps a list of the calls you recently received
and dialed, even if the calls did not connect. The lists are
sorted from newest to oldest entries. The oldest entries are
deleted as new ones are added.
M > Recent Calls
To
scroll to Received Calls or
Dialed Calls
select the list
scroll to an entry
Note: < means the call
connected.
59
Press
4 N
To
call the entry’s number
or
VIEW (+)
view entry details
or
Recent Calls
The Last Calls Menu includes the following options:
Option
Store
Delete
Delete All
Send Message
Add Digits
Attach Number
Send Tones
60
open the Last Calls Menu to
perform other procedures as
described in the following list
Description
Create a phonebook entry with
the number in the No. field.
Delete the entry.
Delete all entries in the list.
Open a new text message with
the number in the To field.
Add digits after the number.
Attach a number from the
phonebook or recent call lists,
after the highlighted number.
Send the number to the network
as DTMF tones, for credit card or
password calls.
Using the Notepad
Your phone stores the most recent string of digits
entered on the keypad in a temporary memory location
called the notepad. This can be a phone number that
you called, or a number that you entered but did not
call. To retrieve the number stored in the notepad:
M > Recent Calls
> Notepad
Press
To
call the number
Recent Calls
Find the Feature
or
open the Dialing Menu to
attach a number or insert a
special character
or
STORE (+)
create a phonebook entry
with the number in the No.
field
Viewing and Resetting Call
Timers
Network connection time is the elapsed time from the
moment you connect to your service provider's network to
the moment you end the call by pressing O. This time
includes busy signals and ringing.
61
The amount of network connection time you track on
your resettable timer may not equal the amount of
time for which you are billed by your service
provider. For billing information, please contact
your service provider directly.
Recent Calls
You can view the following network
connection times:
Timer
Last Call
Dialed Calls
Received Calls
All Calls
Lifetime
62
Description
Time spent on last dialed or
received call. You cannot reset this
timer.
Time spent on dialed calls since
the last time you reset this timer.
Time spent on received calls
since the last time you reset this
timer.
Time spent on dialed and
received calls since the last time
you reset this timer.
Time spent on all calls on this
phone. You cannot reset this timer.
To view a call timer:
Find the Feature
M > Recent Calls
> Call Times
Press
2 SELECT (+)
To
scroll to the timer you want\
view the recorded time
Press
1 RESET (+)
To
reset the time (if available)
2 YES (-)
confirm the reset
Recent Calls
To reset the call timer:
63
Phonebook
You can store a list of names and phone numbers or email
addresses in your phone’s electronic phonebook.
To see the names in your phonebook, press
M > Phonebook from the idle display. Scroll to a name
and press VIEW (+) to view details of the phonebook
entry as shown below.
Phonebook
Viewing Entry Details
Type indicator
identifies
number type:
$ Work
U Home
S Main
h Mobile
Z Fax
p Pager
[ Email
Return
to list
Voice Name indicator
indicates a recorded
voice name
Entry’s Name
$*Carlo Emrys
Entry’s phone
number or
email address
2154337215
Speed No.15
BACK
Press M
to open the
EDIT
Entry’s speed
dial number
Edit
entry
Phonebook
Menu
Note: When you set a distinctive ringer alert for an entry,
the Ringer ID setting appears below the speed dial number.
64
Storing a Phonebook Entry
A phone number or email address is required for a
phonebook entry. All other information is optional.
Shortcut: Enter a phone number in the idle display, then
press STORE (+) to create a phonebook entry with the
number in the No. field. Go directly to step 3 to continue.
Enter Information
Find the Feature
Press
2 SELECT (+)
3 CHANGE (+)
4 keypad keys
5 OK (+)
6 CHANGE (+)
7 keypad keys
8 OK (+)
To
scroll to Phone Number or
Email Address
select the entry type
select Name
Phonebook
M > Phonebook
M > New
enter a name for the entry
store the name
select No. or Email
enter the phone number or
email address
Tip: You can store a PIN code
with the phone number. See
page 67.
store the phone number or
email address
65
Press
9 CHANGE (+)
10
To
select Type
Note: This option is not
available for email entries.
scroll to the number type
11 SELECT (+)
select the number type
12 RECORD (+)
record a voice name for the
entry, if desired (see page 69)
or
Phonebook
Go to step 13 if
you do not want
a voice name
13
14 CHANGE (+)
15 keypad keys
16 OK (+)
17 CHANGE (+)
scroll to Speed No.
The next available speed dial
number is assigned to a new
phonebook entry.
select Speed No. if you want
to change it
enter a different speed dial
number, if desired
store the speed dial number
select Ringer ID if you want to
assign a distinctive ringer
alert for the phone number
Your phone uses the alert to
notify you when you receive a
call from this phone number.
See page 96.
66
Press
18
To
scroll to the alert you want
19 SELECT (+)
store the ringer ID alert
20 SELECT (+)
select MORE if you want to
create another entry under
the same Name
You must use a different Type
identifier for each number.
Complete Phonebook Entry
When you are finished entering information for a
phonebook entry:
To
store the entry
Phonebook
Press
DONE (-)
Storing a PIN Code With the
Phone Number
You can store a PIN code with the phone number for calls
that require additional digits (for example, to make a calling
card call, or to retrieve voicemail or answering machine
messages). Insert one or more of the following characters
67
Phonebook
in the dialing sequence to ensure that the number dials
and connects properly:
Press
M > Insert Pause
To
insert a p (pause) character
M > Insert Wait
Your phone dials the
preceding digits, waits for the
call to connect, then sends
the remaining digit(s).
insert a w (wait) character
M > Insert 'n'
Your phone dials the
preceding digits, waits for the
call to connect, then prompts
you for confirmation before it
sends the remaining digit(s).
insert an n (number)
character
Your phone prompts you for a
number before dialing the
call. The number you enter is
inserted into the dialing
sequence in place of the n
character
Note: You can store a maximum of 32 digits per number.
Each character counts as one digit.
68
Recording a Voice Name For a
Phonebook Entry
You can record a voice name for a new or existing
phonebook entry. A voice name lets you call the
phonebook entry using voice dial (see page 70).
Tip: Make your recording in a quiet location. Hold the
phone about four inches (10 centimeters) from your
mouth, and speak directly into the phone in a normal
tone of voice.
Find the Feature
Do This
2 Press VIEW (+)
3 Press EDIT (+)
4 Press S
To
scroll to the entry
view entry details
edit the entry
scroll to Voice Name
Phonebook
1 Press S
M > Phonebook
begin recording
5 Press RECORD (+)
record the voice name
6 Press and release
the voice key and say
the entry’s name (in
two seconds)
7 Press and release
confirm the voice name
the voice key and
repeat the name
store the voice name
8 Press DONE (-)
69
Dialing a Phonebook Entry
Use one of the following procedures to call a number (or
send a text message to an email address) stored in your
phonebook.
Phonebook List
Find the Feature
M > Phonebook
Phonebook
Press
To
1 keypad key letter jump to entries that begin
with that letter (optional)
scroll
to the entry
2 S
3 N
make the call
Voice Dial
Do This
To
make the call
Press and release
the voice key and
say the entry’s name
(in two seconds).
To speed dial a phonebook entry, see page 31. To call an
entry with one-touch dial, see page 31.
70
Editing a Phonebook Entry
Find the Feature
Press
M > Phonebook
To
scroll to the entry
2 VIEW (+)
view entry details
3 EDIT (+)
edit the entry
Edit the entry as described on pages 65-67.
Deleting a Phonebook Entry
M > Phonebook
Press
1 S
To
scroll to the entry
2 M
open the Phonebook Menu
scroll to Delete
4 SELECT (+)
select Delete
5 YES (-)
confirm the deletion
Phonebook
Find the Feature
Setting the Primary Number for
a Phonebook Entry
When you enter multiple phone numbers for the same
name, you can set one as the primary number.
Find the Feature
M > Phonebook
71
Press
2 M
4 SELECT (+)
6 SELECT (+)
To
scroll to the entry
open the Phonebook Menu
scroll to Set Primary
select Set Primary
scroll to the number you want
to set as the primary number
set the primary number
Phonebook
Depending on how the phonebook list is sorted, the
primary number is listed first, or is the only number that
appears for a phonebook entry. See page 73.
Checking Phonebook Capacity
You can see how much memory space remains for storing
phonebook and datebook entries on your phone.
Find the Feature
Press
1 M
3 SELECT (+)
M > Phonebook
To
open the Phonebook Menu
scroll to Ph Book Capacity
select Ph Book Capacity
Your phone displays the
phone memory meter.
72
Sorting the Phonebook List
You can sort your phonebook list by speed dial number
(the standard), name, email address, or voice name.
Note: The voice name sort is identical to the name sort,
except that entries with voice name tags appear first.
Find the Feature
Press
1 M
3 SELECT (+)
5 CHANGE (+)
7 SELECT (+)
To
open the Phonebook Menu
scroll to Setup
select Setup
scroll to Sort by
select Sort by
scroll to Name, Speed No.,
Voice Name, or Email
select the sort order
Phonebook
M > Phonebook
If you select Speed No., Voice Name, or Email, the
procedure is complete.
If you select Name, you must specify whether you want to
view all numbers or just the primary number for each
name:
Press
8 CHANGE (+)
To
change view preference
scroll to Primary Contacts or
All Contacts
73
Press
10 SELECT (+)
To
select the view preference
11 DONE (-)
set the view preference
To set an entry’s primary phone number, see page 71.
Phonebook
Tip: When the phonebook list displays primary numbers
only, you can scroll to a name and press * or # to view
other numbers associated with the name.
74
Datebook
The datebook is a calendar that lets you schedule and
organize events such as appointments and meetings. You
can set the datebook to send a reminder alarm for specific
events.
Note: You must set the correct time and date on your
phone to use the datebook.
To schedule or review datebook events:
M > Datebook
Find the Feature
Week View
The datebook initially displays a calendar for the week.
Lines or filled boxes indicate scheduled events.
{ 15 NOV-21 NOV
12 hour
window
Exit the
datebook
Days of week
(press * or #
to select)
S M T W T F S
One-hour event
EXIT
Full day (12-hour)
event scheduled
VIEW
Datebook
Untimed
event
Go to
selected day
Press M to open
the Datebook Menu
75
Day View
Select a day and press VIEW (+) to see the day’s events.
Untimed
event
Down scroll
arrow
Return to
previous screen
Day of week
THU 19-NOV
¥ Joe's B-day
9:00
BACK
A Marie,...
VIEW
Press M to open
the Datebook Menu
Reminder
alarm
Event
Show event
details
Event View
Datebook
Select an event and press VIEW (+) to see event
details.
Reminder
alarm
Down scroll
arrow
Day and time
A THU 9:00am
Marie, mtg about
new product
BACK
Return to
previous screen
76
EDIT
Press M to open
the Datebook Menu
Event details
Edit event
Adding a Datebook Event
A title is required for a datebook event. All other
information is optional.
Note: You must create an event to use the reminder alarm.
Find the Feature
Press
1 CHANGE (+)
2 keypad keys
3 OK (+)
5 DONE (-)
M > Datebook > day
M > New
To
select Title
enter a title for the event
store the event title
scroll to other fields and enter
information as necessary
You can set start time,
duration, date, repeat
interval, and reminder alarm.
store the event
Find the Feature
Press
1 * or #
2 VIEW (+)
M > Datebook
Datebook
Changing Event Information
To
scroll to the day
display the day view
scroll to the event
4 VIEW (+)
display the event view
5 EDIT (+)
edit the event
77
Press
7 CHANGE (+)
8 keypad keys
9 DONE (-)
To
scroll to the information you
want to change
edit the information
enter new information
store the information
Copying an Event
Find the Feature
Press
1 * or #
2 VIEW (+)
4 M
Datebook
To
scroll to the day
display the day view
scroll to the event
open the Datebook Menu
scroll to Copy
6 SELECT (+)
copy the event
7 YES (-)
confirm the copy
9 } (+)
Your phone assumes you
want to change the date, and
displays the Date field.
enter date information
move to month, day, and year
10 DONE (-)
save the copy of the event
8 keypad keys
11
78
M > Datebook
scroll to and edit event
information, if necessary
Press
12 DONE (-)
To
store the information
Deleting an Event
Find the Feature
Press
1 * or #
2 VIEW (+)
4 M
M > Datebook
To
scroll to the day
display the day view
scroll to the event
open the Datebook Menu
scroll to Delete
6 SELECT (+)
select Delete
7 YES (-)
confirm the deletion
Datebook
79
Radio
You can use your phone to listen to FM radio
stations when the optional Motorola Original™ FM
Stereo Radio Headset accessory is plugged into
the phone’s accessory connector port.
Turning the Radio On and Off
Press
Radio (+)
To
turn the radio on and off
Radio
Alternatively, you can use the following procedure:
Press
1 M
3 On (+) or
Off (+)
To
open the menu
scroll to Radio
turn the radio on or off
Note: The Radio menu feature and soft key options
appear only when the FM Stereo Radio Headset is
plugged into the accessory connector port.
80
Tuning a Station
Do This
To
Press S
scroll to the next frequency
or
Press and hold S
scroll to the next available
stereo station
Storing a Preset
Do This
Press and hold a
number key
(1 to 9)
To
assign its preset number to
the tuned station
Press
a number key
(1 to 9)
Radio
Selecting a Preset
To
tune the station stored at the
preset location
Sending and Receiving Calls
With the Radio On
Your phone rings or vibrates as usual to notify you of an
incoming call, message, or other event.
81
Do This
Press IGNORE (-)
To
ignore the call
Press ANSWER (+)
answer the call
or
Press the button on the
FM Stereo Radio
Headset microphone
Note: You can use the
FM Stereo Radio
Headset microphone to
converse with the other
party during a call
To end the call and resume the FM broadcast:
Do This
Press O
To
end the call
Radio
or
Press and hold the
button on the FM Stereo
Radio Headset
microphone
Turn the radio off before dialing outgoing calls from the
phone keypad. You do not have to turn off the radio to
dial emergency numbers, or numbers selected from your
phonebook or recent call lists.
Tip: To dial a recently called number, press N or the
button on the FM Stereo Radio Headset microphone to go
to the dialed calls list. For more information, see page 59.
82
Messages—Voicemail
You can listen to your voicemail messages by
calling your network voicemail phone number.
Voicemail messages are stored on the
network—not on your phone.
Storing Your Voicemail Number
Storing your voicemail number on your phone makes it
easy for you to listen to new voicemail messages. In many
cases, your service provider has already done this for you.
Find the Feature
M > Messages
M > VoiceMail Setup
To
enter your voicemail number
2 OK (+)
Tip: You can store your PIN
code with the voicemail
number. See page 67.
store the number
Your service provider additionally may store your voicemail
number as phonebook entry number 1, so you can use
one-touch dial to listen to your voicemail messages. If
necessary, see page 65 to store your voicemail number
for one-touch dial access.
Messages—Voicemail
Press
1 keypad keys
83
Receiving a Voicemail Message
When you receive a voicemail message, your phone
displays the & (voice message waiting) indicator and a
New VoiceMail notification.
Press
CALL (+)
To
listen to the message
If reminders are turned on, your phone sends a reminder
at regular intervals until you close the new message
notification, listen to the message, or turn off your phone.
Messages—Voicemail
Listening to a Voicemail
Message
84
Find the Feature
M > Messages > VoiceMail
The phone calls your voicemail number. If no voicemail
number is stored, your phone prompts you to store one.
Shortcut: If your voicemail number is also stored as
phonebook entry number 1, you can press and hold 1 to
listen to your voicemail message(s).
Messages—Text
Text messages are brief messages that you
can send and receive.
Quick notes are pre-written text messages that
you can incorporate into a message and send
Your text message inbox must be set up before you can
send and receive messages. The number of messages the
inbox can hold depends on the length of the messages,
and the number of other messages and drafts stored on
your phone.
Messages—Text
quickly.
Setting Up the Text Message
Inbox
Note: In many cases, your service provider has already
set up the text message inbox for you.
Find the Feature
Press
1 CHANGE (+)
2 keypad keys
3 OK (+)
M > Messages
M > Text Msg Setup
To
change the Srvce Center No.
enter the phone number for
the service that handles your
outgoing messages
store the number
85
Press
4 CHANGE (+)
6 OK (+)
To
change the Expire After
period
enter the expiration period—
the number of days your
network tries to send
unreceived messages
store the expiration period
7 CHANGE (+)
change the Cleanup setting
Messages—Text
5 keypad keys
9 SELECT (+)
scroll to the number of days
you want to keep messages
in the inbox, or the number of
messages you want to keep
select the cleanup setting
10 CHANGE (+)
change the SMS Alert setting
12 SELECT (+)
select whether you want
incoming message alerts
turned On or Off while you are
on a voice call
select the SMS Alert setting
13 DONE (-)
save the inbox settings
11
Receiving a Text Message
Note: Your text message inbox must be set up before you
can receive text messages. See page 85.
86
When you receive a text message, your phone displays the
X (message waiting) indicator and a New Message
notification, and gives an alert.
Press
READ (+)
To
open the message
When your phone displays Memory is Full!, you must
delete some existing messages to receive new messages.
Reading, Locking, or Deleting a
Text Message
Messages—Text
If reminders are turned on, your phone sends a reminder
at regular intervals until you close the new message
notification, read the message, or turn off your phone.
Messages in the text message inbox are sorted from
newest to oldest. The oldest messages are deleted
automatically as specified by the inbox cleanup setting
(see page 85). If you want to save a message, you should
lock it to prevent it from being deleted during cleanup.
Find the Feature
M > Messages
> Text Msgs
87
Press
To
scroll to the message
3 BACK (-)
close the message
Messages—Text
2 READ (+)
The following indicators show
message status:
Y = unread
ñ=unread (with attachment)
d = unread and urgent
ï = unread and urgent
(with attachment)
n = read
î = read (with attachment)
ò = read and urgent
f = read and locked
ó = read and locked
(with attachment)
open the message
or
DELETE (+)
delete the message
or
88
open the Text Msg Menu to
perform other procedures as
described in the following list
Press
4 SAVE (-)
or
REPLY (+)
or
compose and send a reply
open the Text Msg Menu to
perform other procedures as
described in the following list
The Text Msg Menu includes the following options:
Option
Delete
Call Back
Go To
Forward
Store Tone
Play
Lock/Unlock
Description
Delete the message.
Call the number in the message
header or embedded in the
message.
Launch the micro-browser and go
to a Web address (URL)
embedded in the message.
Open a copy of the text message,
with an empty To field.
Messages—Text
To
close the message
Note: You cannot forward sound
files embedded in a text message.
Only the text is forwarded.
Store the selected sound file.
Play a sound file in the message.
Lock or unlock the message.
89
Messages—Text
Option
Store Number
Description
Create a phonebook entry, with
the embedded number in the No.
field.
Delete All
Delete all inbox messages.
Create Message Open a new text message.
Store Address
Create a phonebook entry, with
the embedded email address in
the Email field.
Setup
Open the text message inbox
setup menu.
Storing Sounds
Text messages that you receive can contain sounds. A
sound begins playing when you scroll to or select the ê
(sound file) indicator in the message.
You can store these embedded sound files on your phone,
and use them as alert tones.
Press
1 M
3 SELECT (+)
To
open the Text Msg Menu
scroll to Store Tone
select the option
Your phone adds the sound
to the My Tones list.
For more information about using sound files, see
pages 95 and 97.
90
Sending a Text Message
You can send a text message to one or more
recipients. You can manually enter each recipient’s
phone number or email address, or select numbers/
addresses from the phonebook or recent call lists.
Find the Feature
M > Messages
> Create Message
Press
1 CHANGE (+)
2 keypad keys
To
select To
Messages—Text
Note: When you manually enter numbers and/or email
addresses, you must insert a space between each entry.
Press and hold 1 until the space appears, then enter the
next number or email address.
enter one or more phone
numbers and/or email
addresses
Tip: Press 1 to insert a
space between each
number/address that you
enter manually.
or
BROWSE (+)
3 OK (+)
select numbers/addresses
from the phonebook or recent
call lists
store the numbers/addresses
4 CHANGE (+)
select Msg
91
Press
5 keypad keys
To
enter the message
Note: Message length is
limited.As you near the limit,
a display counter shows how
many characters are left.
Messages—Text
or
BROWSE (+)
6 OK (+)
store the message
7 CHANGE (+)
select Priority
scroll to the priority you want
9 SELECT (+)
set the priority
10 CHANGE (+)
11 keypad keys
select Call
12 OK (+)
13 CHANGE (+)
14
92
select and insert a quick note
message (see page 93)
enter a number for the
recipient to call back
store the number
select Receipt
select whether you want the
message status to be
updated when the recipient
opens the message
15 OK (+)
Note: Sent messages are
stored in your outbox. See
page 94.
store your receipt preference
16 DONE (-)
finish the message
Press
17 YES (-)
To
send the message
or
NO (+)
cancel the message or save it
in the drafts folder
Quick notes are pre-written text messages that you can
incorporate into a message and send quickly (for example,
Meet me at ...). You can also create new quick notes.
Find the Feature
Messages—Text
Sending a Quick Note Text
Message
M > Messages
> Quick Notes
Press
2 READ (+)
To
scroll to the quick note
read the quick note
or
open the Quick Note Menu to
perform other procedures as
described in the following list
The Quick Note Menu includes the following options:
Option
New
Edit
Description
Create a new quick note.
Edit the quick note.
93
Messages—Text
Option
Delete
Send
Description
Delete the quick note.
Open a new message with the
quick note in the Msg field.
Viewing the Status of Sent
Text Messages
Messages that you send are stored in the outbox.
Find the Feature
M > Messages > Outbox
Messages in the outbox are sorted from newest to oldest.
The following indicators show message status:
á = sending in progress
m = sending failed
94
Y = sent
n = read by recipient
Ring Styles
Your phone rings or vibrates to notify you of an incoming
call or other event. This ring or vibration is called an alert.
You can select one of five different ring styles:
w = loud ring
y = vibrate
t = silent
x = soft ring
u = vibrate and ring
The ring style indicator in the display shows the current
ring style (see page 23).
Selecting a Ring Style
Find the Feature
Press
2 SELECT (+)
Ring Styles
Each ring style contains settings for specific event alerts,
ringer ID, and ringer and keypad volume.
M > Ring Styles > Style
To
scroll to the ring style
select the ring style
Customizing a Ring Style
Change Style Settings
You can change the alerts that notify you of the following
events: incoming calls, text messages, voicemail
95
messages, data calls, fax calls, alarms, and reminders.
Any changes you make are saved to the current ring style.
Find the Feature
M > Ring Styles
> Style Detail
Note: Style represents the current ring style.
Press
2 CHANGE (+)
Ring Styles
4 SELECT (+)
To
scroll to the event
select the event
scroll to the alert you want
select the alert
Activate and Deactivate Ringer IDs
When ringer IDs are turned on, your phone uses
distinctive ringer alerts to notify you of incoming calls or
messages from specific entries stored in your phonebook.
To assign a ringer ID to a phonebook entry, see page 65.
Find the Feature
M > Ring Styles
> Style Detail
Note: Style represents the current ring style.
Press
2 CHANGE (+)
4 SELECT (+)
96
To
scroll to Ringer IDs
change the ringer IDs setting
scroll to On or Off
select the option
Set Ringer or Keypad Volume
Find the Feature
M > Ring Styles
> Style Detail
Note: Style represents the current ring style.
Press
2 * or #
3 OK (+)
To
scroll to Ring Volume or
Key Volume
scroll to the desired volume
confirm the new volume
Creating Alert Tones
Create a Tone
Find the Feature
Ring Styles
You can create and store up to 32 custom alert tones on
your phone. The tones appear in the list of available alerts.
M > Ring Styles
> My Tones
Press
To
scroll to [New Tone]
2 SELECT (+)
select [New Tone]
3 CHANGE (+)
4 keypad keys
select Notes
5 OK (+)
6 CHANGE (+)
7 keypad keys
enter notes (see)
store the notes
select Name
enter a name for the tone
97
Press
8 OK (+)
To
store the name
9 DONE (-)
store the tone
Enter Notes
To create a new tone, use the keypad keys to enter notes.
For each note, you must specify the octave (optional),
pitch, length, and a length modifier (optional). Press a
key multiple times to cycle through its available options
and enter the necessary character as described in the
following lists.
Ring Styles
Octave
The default setting for a new tone is octave four.
Key
Display
Description
enter * followed by a number
(0 to 8) to set the octave
Notes and Rests
Key
98
Display
Description
sharp
flat
note A
note B
note C
Key
Display
Description
note D
note E
note F
note G
rest
Lengths and Modifiers
Key
Description
whole note
half note
quarter note
eighth note
sixteenth note
1/32 note
dotted note
double dotted note
2/3 length note
Ring Styles
Display
Volume Control Characters
Key
Display
V, +, and -
Description
Set volume level from V1 to
V15. Enter V+ or V- to
increase or decrease
volume one level from
current setting.
99
Repeat Characters
Key
Display
(, ), and @
Description
Use parentheses to enclose
sequence of notes to be
repeated. After the
sequence, enter @ followed
by digit(s) to set number of
repetitions.
Ring Styles
Note Entry Sequence
Do This
1 Set the octave
(optional)
2 Set the note to a
sharp or flat, if
necessary
3 Select the note
(required)
4 Set length
(required)
5 Modify length
(optional)
100
Action
Set the octave (*0 to *8)
before selecting the note. The
octave applies to the note
and all following notes until
you change it again.
Enter a sharp or flat (# or &)
before selecting the note.
Press a keypad key.
Set the length (0 to 5) after
selecting the note. If you you
do not specify a length, a 2
(quarter note) length is
appended to the note.
Enter a length modifier (. , :,
or ;) after you set the length.
You can perform the following tasks when creating a tone:
Task
Insert a rest
Repeat a note
sequence
Adjust volume
Ring Styles
Listen to a new
tone as you
compose it
Action
Enter one or more rests
(r characters) as needed in the
tone sequence. Set the length of
the rest (0 to 5) after the rest, just
as you would for a note.
Use ( and ) to group a sequence
of notes. After the sequence,
enter @ followed by a number to
set the number of repetitions.
Enter V+ or V- to increase or
decrease volume one level at the
current location in the note
sequence.
Press M to enter the
Compose Menu, and select
Play All to play the notes you
have entered.
Example
Press the following keys to create this sequence of notes
and rests in octave three: C (quarter note), E flat (quarter
note), half rest, and G (whole note):
Press
1 0033
33
2 222
To
set octave
three
enter note C
Display
*3
101
Press
3 2222
4 0000
5 33
6 2222
Ring Styles
7 7
8 1
9 4
10 0
To
set length to
quarter note
enter flat
symbol
enter note
E flat
set length to
quarter note
enter rest
set length to
half rest
enter note G
set length to
whole note
Display
Play a Tone
Find the Feature
M > Ring Styles
> My Tones
Press
2 M
4 SELECT (+)
102
To
scroll to the tone
open the My Tones Menu
scroll to Play
select Play
Press
5 PLAY (+)
To
play the tone again
or
CANCEL (-)
return to my tones list
Edit a Tone
You cannot edit the predefined alert tones included
with your phone. To edit a custom alert tone:
Find the Feature
M > Ring Styles
> My Tones
2 EDIT (+)
4 CHANGE (+)
5 keypad keys
To
scroll to the tone
open the tone details
scroll to the item you want to
edit (Name or Notes)
select the item
6 OK (+)
enter new text or notes
store the new text or notes
7 DONE (-)
save your changes
Ring Styles
Press
Delete a Tone
You cannot delete the predefined alert tones included with
your phone. To delete a custom alert tone:
Find the Feature
M > Ring Styles
> My Tones
103
Press
2 M
To
scroll to the tone
open the My Tones Menu
scroll to Delete
4 SELECT (+)
select Delete
5 YES (-)
confirm the deletion
Download a Tone
Ring Styles
You can download custom alert tones from a text
message. See page 90.
Setting Reminders
A reminder is an alert that rings or vibrates at regular
intervals to notify you about a voicemail or text message
that you have received.
Find the Feature
M > Ring Styles
> Style Detail
> Reminders
Note: Style represents the current ring style.
Press
2 SELECT (+)
104
To
scroll to Beep or Vibrate to set
the reminder alert type, or Off
to turn off all reminders
select the reminder alert
Shortcuts
Your phone includes several standard shortcuts. You can
create additional shortcuts to frequently used menu items.
Standard Shortcuts
The following shortcuts are pre-programmed in your
phone. You cannot edit or delete these shortcuts.
Do This
Press M, then
press and hold M
(within two seconds)
Press M *
Press M #
Press N
Press O
To
zoom in/out on your phone
display
lock/unlock your keypad
see your phone number
go to the dialed calls list
exit the menu system
You can create a keypad shortcut plus an optional voice
shortcut to a menu item. A voice shortcut takes you
directly to the menu item when you say the shortcut name.
Shortcuts
Creating a Shortcut
Tip: Make your recording in a quiet location. Hold the
phone about four inches (10 centimeters) from your mouth,
and speak directly into the phone in a normal tone of voice.
Do This
1 Press M
To
enter the menu system
105
Do This
2 Press S
3 Press and hold M
4 Press YES (-)
5 Press CHANGE (+)
To
scroll to the menu item
open the shortcut editor
view shortcut options
change the keypad
shortcut number
or
Press DONE (-)
select the default keypad
shortcut number
or
Shortcuts
Press S
106
scroll to Voice to assign a
voice shortcut
begin recording
6 Press RECORD (+)
record the shortcut name
7 Press and release
the voice key and say
the shortcut’s name
(in two seconds)
8 Press and release
confirm the shortcut
the voice key and
name
repeat the name
store the shortcut name
9 Press DONE (-)
Using Shortcuts
Use a Keypad Shortcut
Press
1 M
2 the keypad shortcut
number
To
open the menu
go to the menu item or
perform the menu action
Select a Shortcut From the List
Find the Feature
M > Shortcuts
> the shortcut you want
Use a Voice Shortcut
To
open the menu
go to the menu item or
perform the menu action
Shortcuts
Do This
1 Press M
2 Press and release
the voice key and say
the shortcut’s name
(in two seconds)
107
Voice Notes
You can use the voice note feature to record personal
messages and phone calls on your phone.
Recording a Voice Note
Voice Notes
Use this procedure to record a voice note from the idle
display, or to record a phone call in progress. Your phone
plays an alert tone to notify the other party that the call is
being recorded.
Note: Recording phone calls is subject to varying state
and federal laws regarding privacy and recording of
conversations.
Tip: Make your recording in a quiet location. Hold the
phone about four inches (10 centimeters) from your mouth,
and speak directly into the phone in a normal tone of voice.
Do This
1 Press and hold the
voice key for the
duration of the
recording.
2 Speak your voice note.
3 Release the voice key
to stop recording.
108
Result
The phone sounds an
alert tone and begins
recording.
The phone records the
voice note.
The phone displays the
voice note number and
total recording time.
Viewing the Voice Notes List
M > Voice Notes
Find the Feature
Locked
voice note
Time/date
recorded
Voice Notes
f 2)2:20pm 6/1/00
Down scroll
arrow
Return to
previous screen
1)4:05am 4/1/00
EXIT
PLAY
Play the
highlighted
voice note
Press M to open the
Voice Notes Menu
Voice Notes
109
Playing a Voice Note
M > Voice Notes
Find the Feature
Press
To
scroll to the voice note
2 PLAY (+)
play the voice note
When you connect an optional Motorola Original™
headset or FM Stereo Radio Headset accessory to your
phone, playback is automatically routed to the headset.
Voice Notes
Tip: You can play a voice note while taking a call. It will not
be transmitted to the other party.
Playback Screen
The playback screen is displayed as the voice note plays.
Indicates
% played
Voice Note 3
Press *
to rewind
Return to
previous
screen
110
Voice note
number
SAVE
DELETE
Press M to open the
Voice Notes Menu
Press # to
fast forward
Erase
voice note
Voice Note Controls
If voice note is
unlocked, stop
playback and
display Delete
Stop
playback and
go to Voice
Notes Menu.
Voice Note?
Raise or lower
playback
volume of
voice note.
If voice note is
locked, stop
playback and
unlock voice
note.
Press any
number to
alternately
stop and
start
playback.
Stop
playback and
scroll up/down
to next voice
note.
Fast forward
three
seconds,
resume
playing.
Rewind three
seconds,
resume
playing.
Press and hold
to rewind to the
beginning.
Voice Notes
Stop
playback and
return to voice
notes list.
When playback is
complete, press to
restart.
Press and
hold to fast
forward to
end.
111
Locking and Unlocking a Voice
Note
Lock a voice note to prevent it from being deleted. You
must unlock a voice note to delete it.
Find the Feature
Press
2 M
Voice Notes
4 SELECT (+)
M > Voice Notes
To
scroll to the voice note
open the Voice Notes Menu
scroll to Lock or Unlock
lock or unlock the voice note
To lock or unlock a voice note during playback:
Press
1 M
3 SELECT (+)
To
open the Voice Notes Menu
scroll to Lock or Unlock
lock or unlock the voice note
Playback stops when you lock or unlock a voice note.
Press any number key to resume playback.
112
Deleting a Voice Note
Find the Feature
Press
2 M
M > Voice Notes
To
scroll to the voice note you
want to delete
open the Voice Notes Menu
scroll to Delete or Delete All
4 SELECT (+)
select the highlighted option
5 YES (-)
confirm the deletion
or
cancel deletion
Notes:
• You cannot delete a locked voice note.
Voice Notes
NO (+)
• You cannot recover a delete voice note.
113
Micro-Browser
The micro-browser lets you access
Web pages and Web-based
applications on your phone. Contact
your service provider to set up access,
if necessary.
Starting a Micro-Browser
Session
Find the Feature
Press
Micro-Browser
2 SELECT (+)
114
M > Browser
To
scroll to a bookmark, service,
or application
select the item
If you are unable to establish a network connection with
the micro-browser, contact your service provider.
Interacting With Web Pages
Press
SELECT (+)
keypad keys,
followed by OK (+)
To
scroll through text, or
highlight a selectable item
select the highlighted item
call the highlighted phone
number from the
micro-browser
enter information
Press * to delete one letter
at a time if you make a
mistake.
go back to the previous page
open the Browser Menu
Micro-Browser
115
Calculator
You can use your phone as a calculator and currency
converter.
Calculator
Calculating Numbers
Press
1 number keys
2 * or #
3 SELECT (+)
Selected
function
appears
here
Press * or
# to highlight
a function
Exit the
calculator
116
To
enter a number
highlight a calculator function
perform the function
Entered
number
Calculator
. C = + - x Ö}
EXIT
SELECT
Press M to open
the Calculator Menu
Press * or
# to scroll
to other
functions
Perform the
highlighted
function
The calculator can perform the following functions:
Function
CE
Ö
±
MS
MC
MR
Calculator
Description
Insert a decimal point
Clear the calculation
Clear entry (replaces C when you enter
subsequent values in a calculation)
Calculate the result
Add
Subtract
Multiply
Divide
Divide the displayed value by 100
Change the entry’s sign
(positive/negative)
Calculate the exchange rate
Store the value in memory (overwrites
current stored value)
Clear the value stored in memory
Replace the displayed value with the
value stored in memory
117
Converting Currency
Calculator
The currency converter works just like the calculator,
but uses the $ (currency) function:
Find the Feature
M > Calculator
M > Exchange Rate
Press
1 number keys
To
enter the exchange rate
store the exchange rate
2 OK (+)
3 number keys
4 * or #
5 SELECT (+)
118
enter the amount to convert
(amount to multiply by the
exchange rate)
highlight the $ function
perform the conversion
Games
You can play games on your phone between phone calls.
An incoming call, message, alarm, or alert automatically
ends the game.
Playing a Game
M > Games
Find the Feature
Press
start the game
When the game is over:
Press
NEW (+) or
YES (+)
To
start another session of the
same game
BACK (-) or
NO (-)
end the game session
Games
2 SELECT (+)
To
scroll to a game
119
Game Options
Press M to select the following options during a game.
Note: Some options may not be available for all games.
Option
Game Sounds
New Game
Help
Description
Switch game sounds on/off.
Start a new game session.
Review the goal of the game.
Games
Blackjack
In this classic card game, you play against the dealer to
see who can get closer to 21 points without going over.
Rules of the Game
• The first card is dealt to the dealer. The dealer’s cards
are shown at the top of the display, and your cards are
shown at the bottom.
• Face cards count as 10 points. Number cards count
as the points shown on their face.
• An ace counts as 11 points, unless that would put you
over 21 points. Otherwise, an ace is counted as 1
point. An ace that is originally counted as 11 may later
be counted as 1 if it will bring your total under or equal
to 21 points.
• An initial deal of an ace and a card with a face value of
10 points counts as exactly 21 points or Blackjack.
120
• Blackjack automatically wins against any other hand
that totals 21 points.
• If you score more than 21 points, you go “bust” or
lose.
• If you get five cards without going bust, you win.
• If you and the dealer have the same score, the dealer
wins.
• You can ask for a “hit” or another card as long as
you do not go bust.
• As long as the dealer’s total is less than 17 points,
the dealer must continue to take a hit.
When the game begins, you are dealt two cards.
Press
STAY (-)
To
see the results of the hand
HIT ME (+)
request another card
Games
How to Play
Falling Numbers
Score points by pressing the corresponding number key
for numbers as they “fall” down the display.
Rules of the Game
• If a number reaches the bottom of the display or if you
press an incorrect number key, you score one miss.
• The game is over when you score three misses.
121
• The game has five levels. When you complete a level,
play continues automatically at the next level.
• You earn a bonus if you finish a level without a miss.
How to Play
When the game begins, numbers start falling from the
upper portion of the display. Press the corresponding
number key to eliminate a falling number before it
reaches the bottom of the display.
Games
Press M to select the following options:
Option
Level
Top Scores
Description
Choose the starting level of play.
View the top five scores.
Video Poker
Turn 100 credits into 9,999-plus credits by making the best
possible poker hands.
Rules of the Game
• You start a new game with 100 credits. You must bet
from 1-10 credits for each hand you play.
• You are dealt five cards face up, and have one
opportunity to trade in cards (zero to five) for new
ones.
• A winning hand earns credits as listed in the
Awards Table.
122
• Your credit total is saved when you exit the game. The
next time you play, you start with the number of credits
that remain from the previous session.
• The game is over when you lose all of your credits.
How to Play
Place your initial bet or change your bet (from 1-10 credits)
and then:
select the card to the left
select the card to the right
discard selected card
undo discard (replaces
previous option after discard)
remove discarded cards and
deal replacements
5 or
5 or
DONE (+)
To
start a new hand
Games
Press
DEAL (+)
Press M to select the following options:
Option
Change Bet
Choose Deck
Awards Table
Description
Change bet amount (not
available while hand is in play).
Choose the deck image.
View the list of odds/payouts for
each winning hand.
123
Adjusting Your
Settings
Reordering Menu Items
You can reorder the items in your phone’s main menu.
Find the Feature
M > Settings
> Other Settings
> Personalize
> Main Menu
Press
2 GRAB (+)
Adjusting Your Settings
4 INSERT (+)
To
scroll to a menu item
grab the menu item
move the item to a new
location in the menu
insert the menu item
Customizing a Soft Key
Function
You can relabel the soft keys (- and +) to access
different menu items from the idle display.
Find the Feature
M > Settings
> Other Settings
> Personalize > Keys
124
Press
2 CHANGE (+)
4 CHANGE (+)
To
scroll to Left or Right
select the key
scroll to the new key function
confirm the new function
TTY Operation
You can use an optional TTY device with your
phone to send and receive calls. You must plug the
TTY device into the phone’s headset jack and set
the phone to operate in one of three TTY modes.
Notes:
• Use a TSB-121 compliant cable (provided by the
TTY manufacturer) to connect the TTY device to
your phone.
• For optimal performance, your phone should be at
least 12 inches (30 centimeters) away from the TTY
device. Placing the phone too close to the TTY device
may cause high error rates.
Adjusting Your Settings
• Set the phone volume to level 4 (middle setting) for
proper operation. If you experience a high number of
incorrect characters, adjust the volume as necessary
to minimize the error rate.
125
Set TTY Mode
When you set your phone to a TTY mode, it operates in
that mode whenever the TTY device is connected.
Find the Feature
M > Settings
> Other Settings
> Initial Setup
> TTY Setup
Press
To
scroll to TTY Setup
2 CHANGE (+)
change the TTY mode
scroll to the TTY mode
4 SELECT (+)
select the TTY mode
Adjusting Your Settings
The TTY Setup menu includes the following options:
126
Option
TTY
VCO
HCO
Voice
Description
Transmit and receive TTY characters
Receive TTY characters but transmit
by speaking into the microphone
Transmit TTY characters but receive by
listening to the earpiece
Return to normal voice mode
When your phone is in a TTY mode, the international
TTY symbol and the mode setting are shown in the
display. You can press TTYMODE (-) to change the mode
setting.
ù
Switch to TTY Mode During a Voice Call
Press
1 M
3 SELECT (+)
5 SELECT (+)
To
open the Call menu
scroll to TTY Setup
display the TTY Setup menu
scroll to the TTY mode
select the TTY mode
Return to Voice Mode
To return to normal voice mode, select Voice from the
TTY Setup menu as described on page 126.
Hands-Free Use
hands.
Note: The use of wireless devices and their accessories
may be prohibited or restricted in certain areas. Always
obey the laws and regulations on the use of these
products.
Adjusting Your Settings
You can purchase an optional Motorola
Original™ hands-free car kit or headset for your
phone. These accessories provide alternative
ways for you to use your phone without using your
127
Automatic Answer
You can set your phone to automatically answer calls after
two rings (four seconds) when connected to a car kit or
headset.
Find the Feature
M > Settings
> Other Settings
Press
2 SELECT (+)
4 CHANGE (+)
6 SELECT (+)
To
scroll to Car Settings or
Headset
select the feature
scroll to Auto Answer
select Auto Answer
scroll to On or Off
confirm the setting
Adjusting Your Settings
Automatic Hands-Free
You can set your phone to automatically route calls to a car
kit when it detects a connection.
Find the Feature
> Other Settings
> Car Settings
> Auto Handsfree
Press
2 SELECT (+)
128
M > Settings
To
scroll to On or Off
confirm the setting
Power-Off Delay
When your phone is connected to a car kit, you can set it
to stay on for a period of time after you switch off the
ignition. This prevents the phone from draining your vehicle
battery, but leaves the phone on long enough that you do
not have to re-enter your unlock code when making short
stops.
Note: This feature may not work with all car ignition
switches.
Caution: If you select Continuous, the phone does not
power off when you turn off the ignition. Be careful not to
drain your vehicle battery if you select this option.
Find the Feature
M > Settings
> Other Settings
> Car Settings
> Power-Off Delay
Press
2 SELECT (+)
confirm your selection
Charger Time
When your phone is connected to a car kit, you can set it
to charge itself for a specified time period after you switch
off the ignition. This helps ensure that the phone battery
gets fully charged while the vehicle is parked.
Adjusting Your Settings
To
scroll to the time delay
129
Note: This feature may not work with all car ignition
switches.
Find the Feature
M > Settings
> Other Settings
> Car Settings
> Charger Time
Press
Adjusting Your Settings
2 SELECT (+)
130
To
scroll to the charge time
confirm your selection
Data Calls
A Motorola Original™ data kit lets you transfer
data between your phone and a computer or other
external device. You can:
• use your phone as a modem to connect to the
Internet.
• use your phone to send and receive data calls on your
computer or hand-held device.
Connecting Your Phone to an
External Device
Note: Not all devices are compatible with serial cable or
USB cable connections. Check your external device for
specifications.
Data Calls
Connect your phone to a computer or hand-held device
using a serial cable or a USB cable.
Set Up a Cable Connection
Attach a serial cable or Motorola Original USB cable to
the phone and external device as follows.
Note: Check your computer or hand-held device to
determine the type of cable you need.
131
Attaching a Serial Cable
Data Calls
Use the interchangeable head on the Motorola
Multi-Connect Serial Cable to connect a computer, Palm III
device, or Palm V device to your phone.
132
Do This
1 Plug the serial
cable into the
detachable head.
Make sure that the
Motorola logo on
the detachable
head and the
metal shielding on
the serial cable
plug are both
facing you.
2 With the Motorola
logo and the
phone both facing
you, plug the
detachable head
into the phone’s
accessory
connector port.
3 Plug the other end of the cable into the serial
interface connection on the external device and
tighten the screws.
Attaching a USB Cable
Do This
4 Plug the end of the
cable with the
Motorola logo into the
phone’s accessory
connector port. Make
sure that the logo and
the phone are both
facing you.
5 Plug the other end—the USB connection—into
the USB port on the external device.
Install the software from the CD-ROM that comes with
your Motorola Original data kit. See the data kit’s user
guide for more information.
Data Calls
Install the Software
133
Sending a Data Call
Use this procedure to send data from a connected device,
and to synchronize phonebook and datebook information
between your phone, computer, and/or hand-held device.
Connect your phone to the device as described on
page 131 and do the following:
Data Calls
Do This
To
1 Check the phone make sure that the phone is
connected and powered on
2 Open the
place the call through the
application on
application (such as
your computer
dial-up-networking)
134
Note: You cannot dial data
numbers through your
phone’s keypad. You must
dial them through your
computer.
3 End the call from close the call and connection
the connected
when the transfer is complete
device
Receiving a Data Call
Use this procedure to transfer data to your computer or
hand-held device.
Set Up Your Phone
Find the Feature
M > Settings
> Connection
> Incoming Call
To
select Next Call
2 Press S
scroll to Data In Only
3 Press SELECT (+)
4 Connect your phone
to the device
set the call format
enable the data transfer
Note: You cannot answer incoming voice calls when
your phone is in data mode. Any voice calls you
receive are treated as unanswered calls. To return a
voice call, reset your phone to voice mode as
described on page 136.
Data Calls
Do This
1 Press CHANGE (+)
Transfer the Data
Your phone notifies you when the data call arrives, and
transfers the call to the connected device. Use the
application running on the device to answer the call.
135
End the Data Connection
When the data transfer is complete:
Do This
End the call from the
connected device
To
close the connection
Reset Normal Voice Operation
After making a data call, you must reset your phone to
resume normal voice operations. You cannot receive voice
calls when your phone is in data mode.
Data Calls
Find the Feature
M > Settings
> Connection
> Incoming Call
Do This
1 Press CHANGE (+)
To
select Next Call
2 Press S
scroll to Normal
3 Press SELECT (+)
reset your phone
Your phone also reverts to normal voice operations
when you turn it off and then turn it back on.
136
Security
Assigning a New Code or
Password
Your phone’s unlock code is originally set to 1234, and the
security code is originally set to 000000. Your service
provider may reset these numbers before you receive your
phone.
If your service provider has not reset these numbers, we
recommend that you change them to prevent other users
from accessing your personal information. The unlock
code must contain four digits, and the security code must
contain six digits.
Notes:
• If the unlock code is the only code you can change,
the New Passwords menu is not available. In this case,
change the unlock code by selecting: M > Settings
> Security > Phone Lock > Unlock Code.
Security
• Your service provider may retain your phone’s security
code for customer service purposes. In this case, you
will not be able to use phone features that require you
to enter the security code.
To change a code or password:
Find the Feature
M > Settings > Security
> New Passwords
137
Press
2 CHANGE (+)
3 keypad keys
4 OK (+)
5 keypad keys
6 OK (+)
7 keypad keys
8 OK (+)
To
scroll to the code or password
select the code or password
enter your old code
submit your old code
enter the new code
assign the new code
re-enter the new code
confirm the new code
If You Forget a Code or
Password
If you forget your security code, contact your service
provider.
Security
If you forget your unlock code, try entering 1234 or the last
four digits of your phone number. If that does not work, do
the following at the Enter Unlock Code prompt:
Press
1 M
2 keypad keys
3 OK (+)
138
To
go to the unlock code bypass
screen
enter your security code
submit your security code
Locking and Unlocking Your
Phone
You can lock your phone manually or set the phone to lock
automatically whenever you turn it off.
To use a locked phone, you must enter the unlock code. A
locked phone still rings or vibrates for incoming calls or
messages, but you must unlock it to answer.
You can make emergency calls on your phone even when
it is locked. For more information, see page 29.
Lock Your Phone Manually
Find the Feature
M > Settings > Security
> Phone Lock
> Lock Now
Press
1 keypad keys
2 OK (+)
To
enter your unlock code
lock the phone
You can set your phone to lock every time you turn it off.
Find the Feature
Security
Set Your Phone to Lock Automatically
M > Settings > Security
> Phone Lock
> Automatic Lock > On
Press
1 keypad keys
2 OK (+)
To
enter your unlock code
activate automatic lock
139
Unlock Your Phone
At the Enter Unlock Code prompt:
Press
1 keypad keys
2 OK (+)
To
enter your unlock code
unlock your phone
Locking and Unlocking Your
Keypad
You can lock your phone keypad to prevent accidental
keypresses (for example, when carrying your phone in a
purse or pocket).
Press
M*
To
lock or unlock your keypad
Note: Incoming calls and messages unlock the keypad.
Security
Restricting Calls
You can stop all incoming and/or outgoing calls, or you can
restrict them to the numbers stored in your phonebook.
Notes:
• You can make emergency calls when outgoing
calls are restricted.
• Your phone still receives incoming text messages
when incoming calls are restricted.
140
• When you restrict incoming calls to numbers stored in
the phonebook, a valid incoming call may be restricted
if caller ID information for the call is not available from
the network.
Find the Feature
M > Settings > Security
> Restrict Calls
Press
1 keypad keys
2 OK (+)
To
enter your unlock code
open the restrict calls menu
4 CHANGE (+)
scroll to Outgoing Calls or
Incoming Calls
select the option
5 CHANGE (+)
change the Allow setting
7 SELECT (+)
scroll to All, None, or
Phonebook
select the allowed calls
Security
Tip: The phonebook is not locked when you restrict
outgoing calls to numbers stored in the phonebook. To
prevent a user from adding (and then calling) a new
phonebook entry, you may want to lock the phonebook.
See the “Lock Application” item on page 53.
141
Activating Talk Secure
Your phone can attempt to send your calls using a highsecurity connection, to prevent others from intercepting
them. For more information, see page 28.
Find the Feature
M > Settings > Security
> Talk Secure
Press
Security
2 SELECT (+)
142
To
scroll to Preferred or Off
switch talk secure on or off
Troubleshooting
Check these questions first if you have problems with
your phone. If you need additional help, contact the
Motorola Customer Call Center at 1-800-331-6456
(United States) or 1-800-461-4575 (Canada).
Does the
handset have
a signal? Do
you see j in
the display?
Is the earpiece
volume too
low?
Answer
Press M #. If you do not see
your phone number, contact your
service provider.
The battery level indicator should
have at least one segment
showing (C). If it does not,
recharge your battery. See
page 19.
The signal strength indicator
should have at least one segment
showing (1). If it does not, move
to an area with a stronger signal
to use your phone.
While on a call, press the upper
volume key on the side of your
phone.
Troubleshooting
Question
Is your phone
set up
correctly?
Is your battery
charged? Do
you see B in
the display?
143
Troubleshooting
Question
Is the other
party unable
to hear you?
Has the phone
been
damaged,
dropped, or
gotten wet?
Was a
non-Motorola
battery or
battery
charger used?
Answer
Your phone may be muted. Press
UNMUTE (+) if necessary to
unmute the phone.
Also, make sure that your phone’s
microphone is not blocked by its
carrying case or a sticker.
Dropping your phone, getting it
wet, or using a non-Motorola
battery or battery charger can
damage the phone. The phone’s
limited warranty does not cover
liquid damage or damage caused
from using non-Motorola
accessories.
The following refer to specific problems:
Problem
My phone was
stolen. To
whom should I
report this?
I forgot my
password.
144
Solution
Report a stolen phone to the
police and to your service provider
(the company that sends you your
monthly wireless service bill).
See page 138.
Problem
I pressed the
power key, but
nothing
happened.
The display
says: Enter
Unlock Code.
How do I
unlock my
phone?
My phone
asks for an
unlock code
when I try to
open a feature.
My phone
If you see t or y in the
does not ring. display, then the ringer is turned
off. See page 95.
Troubleshooting
Solution
Be sure to press and hold P
(the power key) until the display
appears and you hear an alert.
This could take several seconds. If
nothing happens, check that a
charged battery is installed. See
page 18.
Enter the factory-preset unlock
code (1234), or the last four digits
of your phone number. If this fails,
call your service provider (the
company that sends you your
monthly wireless service bill).
The application you want is
locked. If you do not know the
unlock code, see page 138.
Also, the ringer may be set to
Silent even though your phone is
set to an audible ring style. See
page 95.
145
Troubleshooting
Problem
My phone
rings even
though I
selected the
Silent (or
Vibrate) ring
style.
I tried to place
a call and
heard an
alternating
high/low tone.
I cannot send/
receive calls.
Solution
The ringer may be set to play a
tone even though your phone is
set to a silent ring style. See
page 95.
Your call did not reach the
wireless system. You may have
dialed the number too soon after
turning the phone on. Wait until
you see the idle display before
making a call.
Make sure that you have a phone
signal (see the “Signal Strength
Indicator” item on page 24). Avoid
electrical or radio interference,
and obstructions such as bridges,
parking garages, or tall buildings.
Your phone also may have the
Restrict Calls feature turned on.
If you know the unlock code, you
can change this setting in the
security menu (M > Settings
> Security).
146
Problem
My phone has
poor reception
and drops
calls.
I cannot open
my message
inbox.
How do I see
the calls I sent
or received?
Also, make sure you have a phone
signal (see the “Signal Strength
Indicator” item on page 24). Stay
clear of any obstructions such as
bridges, parking garages, or tall
buildings.
While on a call, press the upper
volume key. The display should
show the volume increasing.
Also, make sure that your phone’s
earpiece is not blocked by its
carrying case.
Before you can use text
messages, you must set up the
message inbox. See page 85.
To see the most recent calls you
dialed or received:
Troubleshooting
I cannot hear
others on my
phone.
Solution
Make sure that your antenna is
not bent or damaged.
M > Recent Calls
> Received Calls
or
Dialed Calls
147
Problem
My phone will
not send
voicemail
commands,
passwords, or
other codes.
Troubleshooting
1 From the idle display, press:
M > Settings
> Other Settings
> Initial Setup > DTMF
2 Press S to scroll to On.
My phone’s
display is too
dark.
My battery
didn’t last as
long as I
expected.
What can I do
to extend
battery life
148
Solution
Your phone sends commands and
passwords as DTMF tones. You
can set your phone’s DTMF tones
to be On or Off. If you have trouble
sending numbers, check your
DTMF setting.
3 Press SELECT (+) to select it.
Use the Contrast feature to
change the level of contrast in
your display. See page 56.
You can also use the Backlight
feature to change the length of
time that the display backlight
stays on. See page 55.
Your battery’s performance is
affected by charge time, feature
use, temperature changes,
backlight use, and other factors.
For tips on extending your battery
life, see page 25.
Problem
I am unable to
record a voice
note, voice
name, or voice
shortcut.
The beep indicates that you are
set up correctly. If you did not hear
a beep, make sure that both ends
of the data cable are connected—
the smaller end to your phone and
the larger end to your computer.
Troubleshooting
My TTY device
doesn’t work
with my
phone.
I plugged the
data cable into
my phone but
my phone did
not beep. How
do I know if
the data cable
is ready to go?
Solution
Try moving to a quieter location to
make your voice recording. Hold
the phone about four inches (10
centimeters) from your mouth,
and speak directly into the phone
in a normal tone of voice.
Your phone must be set to a TTY
mode for the phone to detect your
TTY device. See page 125.
Also, your computer may have
deactivated the port to save
power. Try opening an application
that uses the port, like a fax or
dial-up application, to
automatically activate the port.
149
Troubleshooting
Problem
My phone
beeped when I
attached the
data cable, but
my data
applications
don’t work.
When sending
data with the
data cable,
why does the
computer
show a
connection
rate of 19200
Kbps?
I can’t end my
data call by
closing the
application on
my computer.
What can I do?
150
Solution
You must be in an area with digital
coverage. Check your phone’s
display for the digital signal
indicator (F).
Some wireless networks may not
support data transmission. If you
see the digital indicator, but you
are roaming on an unfamiliar
network, this may be the case.
Also, remember that data
transmission usually requires a
subscription. Call your service
provider for more information.
19200 Kbps is the data transfer
rate of the connection between
your computer and the phone.
The rate of the connection
between your phone and the
network is displayed on your
phone, and will be either 14400 or
9600 Kbps.
Try pressing O on your phone.
Or try disconnecting the cable or
turning off the phone. If possible,
always close the connection
through your computer, as these
alternative methods may disrupt
the application on your computer.
Problem
I launched the
micro-browser
but the display
says:
Service Not
Available.
Troubleshooting
Solution
You may be in an area without
service. If you have wireless
service, look in the display for the
digital signal indicator (F). If you
do not see the indicator, you may
be in an area that has only analog
service or no service at all. If you
see the digital signal indicator, you
may be connected to a digital
network that does not support
Internet access.
I launched the Try again in a few minutes. The
micro-browser servers may be temporarily busy.
but the display
says:
Data Server
Unavailable.
151
Programming
Instructions
Follow this procedure if you need to program your phone’s
phone number(s).
Note: Programming is normally done by a trained
technician at the site of purchase. Users should not make
changes other than ones in the following procedure.
Before programming, ask your service provider for your:
Programming Instructions
• Carrier System ID (a one- to five-digit number)
• 10-digit MIN (Mobile Identification Number)
Press
1 #, the Carrier System
ID number, #, *, N
2 0, 0, 0, 0, 0,
(This is the security code
that is in the phone when
it is shipped from the
factory.)
3 OK (+)
5 CHANGE (+)
152
To
enter programming
mode
enter the security
code
submit the security
code
scroll to MIN
open the MIN
display
Press
6 keypad keys for the
10-digit MIN
To
enter the new MIN
7 OK (+)
store the new MIN
8 DONE (-)
exit programming
mode
Programming Instructions
153
Specific Absorption
Rate Data
This model phone meets the government’s requirements
for exposure to radio waves.
Specific Absorption Rate Data
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed limits for exposure
to radio frequency (RF) energy set by the U.S. Federal
Communications Commission for the United States and by
Health Canada for Canada. These limits are part of
comprehensive guidelines and establish permitted levels of
RF energy for the general population. The guidelines are
based on standards that were developed by independent
scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all
persons, regardless of age or health.
154
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC and by Health Canada
is 1.6 W/kg.1 Tests for SAR are conducted using standard
operating positions accepted by the FCC and by Industry
Canada with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are
to a wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the public in the
U.S. and Canada, it must be tested and certified to the FCC
and Industry Canada that it does not exceed the limit
established by each government for safe exposure. The tests
are performed in positions and locations (e.g., at the ear and
worn on the body) reported to the FCC and available for
review by Industry Canada. The highest SAR value for this
model phone when tested for use at the ear is 1.48 W/kg2,
and when worn on the body, as described in this user guide, is
0.73 W/kg.2 (Body-worn measurements differ among phone
models, depending upon available accessories and regulatory
requirements). While there may be differences between the
SAR levels of various phones and at various positions, they all
meet the governmental requirements for safe exposure.
http://www.fcc.gov/oet/fccid
after searching on FCC ID IHDT56CA1. You may also refer to
Motorola’s Web site:
http://www.motorola.com/rfhealth
Specific Absorption Rate Data
The FCC and Industry Canada have granted an Equipment
Authorization for this model phone with all reported SAR
levels evaluated as being in compliance with the FCC and
Health Canada RF exposure guidelines. SAR information on
this model phone is on file with the FCC and can be found
under the Display Grant section of:
155
Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications & Internet
Association (CTIA) Web site:
http://phonefacts.net
or the Canadian Wireless Telecommunications Association
(CWTA) Web site:
http://www.cwta.ca
1. In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and
to account for any variations in measurements.
2. Additional related information includes the Motorola testing
protocol, assessment procedure, and measurement uncertainty
range for this product.
Specific Absorption Rate Data
ITC01-064
156
Additional Health and Safety Information
FDA has been receiving inquiries about the safety of mobile
phones, including cellular phones and PCS phones. The
following summarizes what is known—and what remains
unknown—about whether these products can pose a hazard
to health, and what can be done to minimize any potential
risk. This information may be used to respond to questions.
Why the concern?
Mobile phones emit low levels of radio frequency energy (i.e.,
radio frequency radiation) in the microwave range while being
used. They also emit very low levels of radio frequency energy
(RF), considered non-significant, when in the stand-by mode.
It is well known that high levels of RF can produce biological
damage through heating effects (this is how your microwave
oven is able to cook food). However, it is not known whether,
to what extent, or through what mechanism, lower levels of RF
might cause adverse health effects as well. Although some
research has been done to address these questions, no clear
picture of the biological effects of this type of radiation has
emerged to date. Thus, the available science does not allow
us to conclude that mobile phones are absolutely safe, or that
they are unsafe. However, the available scientific evidence
does not demonstrate any adverse health effects associated
with the use of mobile phones.
Additional Health and Safety Information
The U.S. Food and Drug
Administration's Center for
Devices and Radiological Health
Consumer Update on Mobile Phones
157
Additional Health and Safety Information
What kinds of phones are in question?
158
Questions have been raised about hand-held mobile phones,
the kind that have a built-in antenna that is positioned close to
the user's head during normal telephone conversation. These
types of mobile phones are of concern because of the short
distance between the phone's antenna—the primary source
of the RF—and the person's head. The exposure to RF from
mobile phones in which the antenna is located at greater
distances from the user (on the outside of a car, for example)
is drastically lower than that from hand-held phones, because
a person's RF exposure decreases rapidly with distance from
the source. The safety of so-called “cordless phones,” which
have a base unit connected to the telephone wiring in a house
and which operate at far lower power levels and frequencies,
has not been questioned.
How much evidence is there that hand-held
mobile phones might be harmful?
Briefly, there is not enough evidence to know for sure, either
way; however, research efforts are on-going. The existing
scientific evidence is conflicting and many of the studies that
have been done to date have suffered from flaws in their
research methods. Animal experiments investigating the
effects of RF exposures characteristic of mobile phones have
yielded conflicting results. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. In one study,
mice genetically altered to be predisposed to developing one
type of cancer developed more than twice as many such
cancers when they were exposed to RF energy compared to
controls. There is much uncertainty among scientists about
whether results obtained from animal studies apply to the use
For the past five years in the United States, the mobile phone
industry has supported research into the safety of mobile
phones. This research has resulted in two findings in
particular that merit additional study:
In a hospital-based, case-control study, researchers
looked for an association between mobile phone use and
either glioma (a type of brain cancer) or acoustic neuroma
(a benign tumor of the nerve sheath). No statistically
significant association was found between mobile phone
use and acoustic neuroma. There was also no association
between mobile phone use and gliomas when all types of
types of gliomas were considered together. It should be
noted that the average length of mobile phone exposure in
this study was less than three years.
Additional Health and Safety Information
of mobile phones. First, it is uncertain how to apply the results
obtained in rats and mice to humans. Second, many of the
studies that showed increased tumor development used
animals that had already been treated with cancer-causing
chemicals, and other studies exposed the animals to the RF
virtually continuously—up to 22 hours per day.
When 20 types of glioma were considered separately,
however, an association was found between mobile phone
use and one rare type of glioma, neuroepithelliomatous
tumors. It is possible with multiple comparisons of the
same sample that this association occurred by chance.
Moreover, the risk did not increase with how often the
mobile phone was used, or the length of the calls. In fact,
the risk actually decreased with cumulative hours of
mobile phone use. Most cancer causing agents increase
risk with increased exposure. An ongoing study of brain
159
cancers by the National Cancer Institute is expected to
bear on the accuracy and repeatability of these results.1
Additional Health and Safety Information
Researchers conducted a large battery of laboratory tests
to assess the effects of exposure to mobile phone RF on
genetic material. These included tests for several kinds of
abnormalities, including mutations, chromosomal
aberrations, DNA strand breaks, and structural changes in
the genetic material of blood cells called lymphocytes.
None of the tests showed any effect of the RF except for
the micronucleus assay, which detects structural effects
on the genetic material. The cells in this assay showed
changes after exposure to simulated cell phone radiation,
but only after 24 hours of exposure. It is possible that
exposing the test cells to radiation for this long resulted in
heating. Since this assay is known to be sensitive to
heating, heat alone could have caused the abnormalities
to occur. The data already in the literature on the response
of the micronucleus assay to RF are conflicting. Thus,
follow-up research is necessary.2
FDA is currently working with government, industry, and
academic groups to ensure the proper follow-up to these
industry-funded research findings. Collaboration with the
Cellular Telecommunications Industry Association (CTIA) in
particular is expected to lead to FDA providing research
recommendations and scientific oversight of new CTIAfunded research based on such recommendations.
Two other studies of interest have been reported recently in
the literature:
160
Two groups of 18 people were exposed to simulated
mobile phone signals under laboratory conditions while
2
In a study of 209 brain tumor cases and 425 matched
controls, there was no increased risk of brain tumors
associated with mobile phone use. When tumors did exist
in certain locations, however, they were more likely to be
on the side of the head where the mobile phone was
used.
Because this occurred in only a small number of cases,
the increased likelihood was too small to be statistically
significant.4
In summary, we do not have enough information at this point
to assure the public that there are, or are not, any low incident
health problems associated with use of mobile phones. FDA
continues to work with all parties, including other federal
agencies and industry, to assure that research is undertaken
to provide the necessary answers to the outstanding
questions about the safety of mobile phones.
Additional Health and Safety Information
they performed cognitive function tests. There were no
changes in the subjects' ability to recall words, numbers,
or pictures, or in their spatial memory, but they were able
to make choices more quickly in one visual test when they
were exposed to simulated mobile phone signals. This
was the only change noted among more than 20 variables
compared.3
What is known about cases of human cancer that
have been reported in users of hand-held mobile
phones?
Some people who have used mobile phones have been
diagnosed with brain cancer. But it is important to understand
that this type of cancer also occurs among people who have
not used mobile phones. In fact, brain cancer occurs in the
161
Additional Health and Safety Information
U.S. population at a rate of about 6 new cases per 100,000
people each year. At that rate, assuming 80 million users of
mobile phones (a number increasing at a rate of about 1
million per month), about 4800 cases of brain cancer would be
expected each year among those 80 million people, whether
or not they used their phones. Thus it is not possible to tell
whether any individual's cancer arose because of the phone,
or whether it would have happened anyway. A key question is
whether the risk of getting a particular form of cancer is
greater among people who use mobile phones than among
the rest of the population. One way to answer that question is
to compare the usage of mobile phones among people with
brain cancer with the use of mobile phones among
appropriately matched people without brain cancer. This is
called a case-control study. The current case-control study of
brain cancers by the National Cancer Institute, as well as the
follow-up research to be sponsored by industry, will begin to
generate this type of information.
What is FDA's role concerning the safety of
mobile phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as mobile phones before
marketing, as it does with new drugs or medical devices.
However, the agency has authority to take action if mobile
phones are shown to emit radiation at a level that is
hazardous to the user. In such a case, FDA could require the
manufacturers of mobile phones to notify users of the health
hazard and to repair, replace or recall the phones so that the
hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions at this time, FDA has urged the mobile
162
phone industry to take a number of steps to assure public
safety. The agency has recommended that the industry:
• design mobile phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function
• cooperate in providing mobile phone users with the best
possible information on what is known about possible
effects of mobile phone use on human health
At the same time, FDA belongs to an interagency working
group of the federal agencies that have responsibility for
different aspects of mobile phone safety to ensure a
coordinated effort at the federal level. These agencies are:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
Additional Health and Safety Information
• support needed research into possible biological effects
of RF of the type emitted by mobile phones
• Federal Communications Commission
• Occupational Health and Safety Administration
• National Telecommunications and Information
Administration
The National Institutes of Health also participates in this
group.
In the absence of conclusive information about
any possible risk, what can concerned
individuals do?
If there is a risk from these products—and at this point we do
not know that there is—it is probably very small. But if people
163
Additional Health and Safety Information
are concerned about avoiding even potential risks, there are
simple steps they can take to do so. For example, time is a
key factor in how much exposure a person receives. Those
persons who spend long periods of time on their hand-held
mobile phones could consider holding lengthy conversations
on conventional phones and reserving the hand-held models
for shorter conversations or for situations when other types of
phones are not available.
People who must conduct extended conversations in their
cars every day could switch to a type of mobile phone that
places more distance between their bodies and the source of
the RF, since the exposure level drops off dramatically with
distance. For example, they could switch to:
• a mobile phone in which the antenna is located outside
the vehicle
• a hand-held phone with a built-in antenna connected to a
different antenna mounted on the outside of the car or
built into a separate package
• a headset with a remote antenna to a mobile phone
carried at the waist
Again, the scientific data do not demonstrate that mobile
phones are harmful. But if people are concerned about the
radio frequency energy from these products, taking the simple
precautions outlined above can reduce any possible risk.
Where can I find additional information?
For additional information, see the following Web sites:
Federal Communications Commission (FCC) RF Safety
Program (select “Information on Human Exposure to RF
164
Fields from Cellular and PCS Radio Transmitters”):
http://www.fcc.gov/oet/rfsafety
United Kingdom, National Radiological Protection Board:
http://www.nrpb.org.uk
Cellular Telecommunications Industry Association
(CTIA): http://www.wow-com.com
U.S. Food and Drug Administration (FDA) Center for
Devices and Radiological Health:
http://www.fda.gov/cdrh/consumer/
1. Muscat et al. Epidemiological Study of Cellular Telephone Use
and Malignant Brain Tumors. In: State of the Science
Symposium;1999 June 20; Long Beach, California.
2. Tice et al. Tests of mobile phone signals for activity in
genotoxicity and other laboratory assays. In: Annual Meeting of
the Environmental Mutagen Society; March 29, 1999,
Washington, D.C.; and personal communication, unpublished
results.
Additional Health and Safety Information
World Health Organization (WHO) International
Commission on Non-Ionizing Radiation Protection (select Qs
& As): http://www.who.int/emf
3. Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim,
E, and Varey, A. Effect of a 915-MHz simulated mobile phone
signal on cognitive function in man. Int. J. Radiat. Biol., April 8,
1999.
4. Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH.
Use of cellular telephones and the risk for brain tumors: a casecontrol study. Int. J. Oncol., 15: 113-116, 1999.
ITC00-010
165
Warranty
MOTOROLA LIMITED WARRANTY FOR
PERSONAL COMMUNICATION PRODUCTS,
ACCESSORIES AND SOFTWARE PURCHASED IN
THE UNITED STATES OR CANADA
Warranty
What Does this Warranty Cover?
166
Subject to the exclusions contained below, Motorola, Inc.
warrants its wireless telephones, pagers and consumer
two-way radios that operate via Family Radio Service or
General Mobile Radio Service (“Products”), Motorola-branded
or certified accessories sold for use with these Products
(“Accessories”) and Motorola software contained on
CD-ROMs or other tangible media and sold for use with these
Products (“Software”) to be free from defects in materials and
workmanship under normal consumer usage for the period(s)
outlined below. This limited warranty is a consumer's exclusive
remedy, and applies as follows to new Motorola Products,
Accessories and Software purchased by consumers in the
United States or Canada, which are accompanied by this
written warranty:
Products and Accessories
Products Covered
Products and
Accessories as defined
above, unless otherwise
provided for below.
Decorative Accessories
and Cases. Decorative
covers, bezels,
PhoneWrap™ covers and
cases.
Monaural Headsets. Ear
buds and boom headsets
that transmit mono sound
through a wired
connection.
Consumer Two-Way
Radio Accessories.
Limited lifetime warranty for
the lifetime of ownership by the
first consumer purchaser of
the product.
Ninety (90) days from the
date of purchase by the first
consumer purchaser of the
product.
The balance of the original
warranty or for ninety (90)
days from the date returned to
the consumer, whichever is
longer.
Warranty
Products and
Accessories that are
Repaired or Replaced.
Length of Coverage
One (1) year from the date of
purchase by the first consumer
purchaser of the product
unless otherwise provided for
below.
Limited lifetime warranty for
the lifetime of ownership by the
first consumer purchaser of
the product.
167
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are
excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls
below 80% of their rated capacity and batteries that leak are
covered by this limited warranty.
Warranty
Abuse & Misuse. Defects or damage that result from:
(a) improper operation, storage, misuse or abuse, accident or
neglect, such as physical damage (cracks, scratches, etc.) to
the surface of the product resulting from misuse; (b) contact
with liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or food;
(c) use of the Products or Accessories for commercial
purposes or subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not the fault of
Motorola, are excluded from coverage.
Use of Non-Motorola Products and Accessories. Defects
or damage that result from the use of Non-Motorola branded
or certified Products, Accessories, Software or other
peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, or modification in any way by
someone other than Motorola, or its authorized service
centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of
tampering; (c) mismatched board serial numbers; or
168
(d) nonconforming or non-Motorola housings, or parts, are
excluded form coverage.
Communication Services. Defects, damages, or the failure
of Products, Accessories or Software due to any
communication service or signal you may subscribe to or use
with the Products Accessories or Software is excluded from
coverage.
Software
Products Covered
Software. Applies only to
physical defects in the media
that embodies the copy of the
software (e.g. CD-ROM, or
floppy disk).
Length of Coverage
Ninety (90) days from the
date of purchase.
Exclusions
Warranty
Software Embodied in Physical Media. No warranty is
made that the software will meet your requirements or will
work in combination with any hardware or software
applications provided by third parties, that the operation of the
software products will be uninterrupted or error free, or that all
defects in the software products will be corrected.
Software NOT Embodied in Physical Media. Software that
is not embodied in physical media (e.g. software that is
downloaded from the internet), is provided “as is” and without
warranty.
169
Who is Covered?
This warranty extends only to the first consumer purchaser,
and is not transferable.
What Will Motorola Do?
Motorola, at its option, will at no charge repair, replace or
refund the purchase price of any Products, Accessories or
Software that does not conform to this warranty. We may use
functionally equivalent reconditioned/refurbished/pre-owned
or new Products, Accessories or parts. No data, software or
applications added to your Product, Accessory or Software,
including but not limited to personal contacts, games and
ringer tones, will be reinstalled. To avoid losing such data,
software and applications please create a back up prior to
requesting service.
How to Obtain Warranty Service or Other
Information?
Warranty
To obtain service or information, please call:
170
USA
Canada
Phones 1-800-331-6456
All Products
1-800-461-4575
Pagers 1-800-548-9954
Two-Way Radios 1-800-353-2729 TTY 1-888-390-6456
TTY 1-888-390-6456
For Accessories and Software, please call the telephone
number designated above for the product with which they
are used.
You will receive instructions on how to ship the Products,
Accessories or Software, at your expense, to a Motorola
Authorized Repair Center. To obtain service, you must
include: (a) a copy of your receipt, bill of sale or other
comparable proof of purchase; (b) a written description of the
problem; (c) the name of your service provider, if applicable;
(d) the name and location of the installation facility (if
applicable) and, most importantly; (e) your address and
telephone number.
What Other Limitations Are There?
Warranty
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS
EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN
NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN
CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR
ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATA, SOFTWARE OR APPLICATIONS
OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY TO USE
THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE
171
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY
LAW.
Some states and jurisdictions do not allow the limitation
or exclusion of incidental or consequential damages, or
limitation on the length of an implied warranty, so the
above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you
may also have other rights that vary from state to state or
from one jurisdiction to another.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola
software such as the exclusive rights to reproduce and
distribute copies of the Motorola software. Motorola software
may only be copied into, used in, and redistributed with, the
Products associated with such Motorola software. No other
use, including without limitation disassembly of such Motorola
software or exercise of the exclusive rights reserved for
Motorola, is permitted.
Warranty
ITC02-154
172
Product Registration
Online Product Registration:
http://www.motorola.com/warranty
Product registration is an important step toward enjoying your
new Motorola product. Registering helps us facilitate warranty
service, and permits us to contact you should your product
require an update or other service. Registration is for U.S.
residents only and is not required for warranty coverage.
Please retain your original dated sales receipt for your
records. For warranty service of your Motorola Personal
Communications Product you will need to provide a copy of
your dated sales receipt to confirm warranty status.
Thank you for choosing a Motorola product.
Export Law
Assurances
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of
the United States of America and Canada may restrict the
exportation or re-exportation of this product to certain
destinations. For further information contact the U.S.
Department of Commerce or the Canadian Department of
Foreign Affairs and International Trade.
173
Index
Index
174
accessories
optional 10, 80, 110,
125, 127, 131
standard 18
accessory connector port
active line indicator
defined 24
illustration 23
Add Digits feature 60
alarm 75, 77
alert
creating 97–104
defined 95
reminders, turning on/off
104
selecting 95–96
turning off 30
analog signal indicator
defined 24
illustration 23
animation 56
answering a call 22
antenna 1
application, locking 53
appointments. See
datebook
Attach Number feature 32,
60
backlight 55
battery
car kit charger time 129
charging 19–20
extending battery life
25–27, 55, 56
installing 18–19
level indicator 20, 23,
24
meter 52
battery save 56
blackjack 120–121
block cursor, defined 38
browse text mode 39
browser. See
micro-browser
calculator 116–118
calendar. See datebook
call (continued)
received calls list 32,
34, 59–60
receiving 22
recent calls 59–60
restricting 140–141
ring style, setting 95
secure connection 28,
142
speakerphone,
activating 34
storing 59–60
three-way call 33
timing 61–63
unanswered call 29
voice dial 32
call timers 61–63
resetting 63
viewing 63
call waiting 33
caller ID 28, 29
calling card call 67
calling line identification.
See caller ID
car kit
automatic answer 128
automatic hands-free
128
charger time 129
power-off delay 129
clock 23
Index
call
adding digits after phone
number 60
alert, creating 97–104
alert, selecting 95–96
alert, turning off 30
answer options 53
answering 22
call waiting 33
calling card 67
canceling 30
data call 134–136
datebook, opening 34
deleting 59–60
dialed calls list 32, 34,
59–60
dialing 21
dialing a recent call
59–60
emergency number 29
ending 22
in-call timer 53
incoming call type,
setting 135–136
making 21
message center,
accessing 34
muting 34
prefix digits, inserting
32
privacy 28, 142
175
Index
codes
changing 137–138
default 21
if you forget a
code/password
138
original 137
computer
connecting to phone
131–133
contrast, display 56
currency converter 118
cursor 38
customer service, calling
49
customizing the menu 124
data call
connecting to external
device 131–133
incoming call format,
setting 135–136
receiving 135–136
sending 134
date, setting 55
datebook
adding an event 77
alarm 77
calendar 75
changing event
information 77
176
datebook (continued)
copying an event 78
day view 76
deleting an event 79
event reminders, turning
on/off 104
event view 76
reminders 77
week view 75
deleting a call 59–60
dialed calls list 32, 34,
59–60
dialing a number 21
Dialing Menu 61
digital signal indicator
defined 24
illustration 23
display
animation 56
backlight 55
contrast 56
described 23–25
greeting 54
idle display 23
illustration 23
language 56
zoom setting 55
zooming in/out 25
drafts folder 50
DTMF tones 34, 56, 60,
148
E
earpiece
illustration 1
volume, adjusting 25
email
address, storing in
phonebook
65–67
email, sending 70, 91–93
emergency number 29
end key
functions 1, 22
menu functions 35
ending a call 22
Enter Unlock Code
message 138, 140
event alert 95–96
exchange rate, calculating
118
external device
connecting to phone
131–133
games 119–123
greeting, display 54
factory settings, resetting
56–57
falling numbers 121–122
flashing cursor, defined 38
FM Stereo Radio Headset
49, 80–82
idle display, defined 23
in use indicator
defined 24
illustration 23
inbox, text message
85–86
in-call timer 53
Index
hands-free mode
automatic answer 128
automatic call routing
128
charger time 129
defined 127
power-off delay 129
speakerphone,
activating 34
headset
automatic answer 128
FM Stereo Radio
Headset 49,
80–82
headset jack 1
high-security connection
28, 142
177
Index
178
incoming call
canceling 30
type, setting 135–136
Incoming Call message
28
indicators
active line 23, 24
battery level 20, 23, 24
digital/analog signal 23,
24
in use 23, 24
loud ring style 25, 95
menu 23, 24
message waiting 23,
24, 87
missed call 29
ring style 23, 25, 95
roam 23, 24
signal strength 23, 24
silent alert 25
silent ring style 25, 95
soft ring style 25, 95
vibrate and ring style
25, 95
vibrate style 25, 95
voice message waiting
23, 24, 84
voice name 64
iTAP software 44–47
key
end 1, 22, 35
left soft key 1, 23, 35,
124
lock 53, 140
menu 1, 10, 24, 35
power 1, 21
right soft key 1, 23, 35,
124
scroll 1, 35
send 1, 21, 22, 59
voice 1, 69, 108
volume control 1, 25
keypad
answering calls 53
locking and unlocking
53, 140
volume, setting 97
language, setting 56
left soft key
customizing 124
functions 1, 23, 35
Line Not Secure message
29
lock
applications 53
keypad 53, 140
lock (continued)
phone 139–140
voice notes 112
lock application feature 53
loud ring style indicator
25, 95
Low Battery message 24
making a call 21
master clear 57
master reset 56
Memory is Full! message
87
menu
Browser Menu 115
Calculator Menu 116
customizing 124
Datebook Menu 75, 76
Dialing Menu 32, 61
entering text 37–38,
39–47
features 48–58
language, setting 56
Last Calls Menu 60
lists 36
locking applications 53
My Tones Menu 102, 104
navigating 10, 35
Phonebook Menu 64
Quick Note Menu 93–94
Index
menu (continued)
rearranging features
124
scroll feature 55
Text Msg Menu 89–90
using features 10,
36–38
Voice Notes Menu 109,
110, 111
menu indicator
defined 24
illustration 23
menu key 1, 10, 24, 35
message
deleting, text 87–90
dialing number from 31
drafts folder 50
inbox setup, text
message 85–86
locking, text 87–90
outbox 50, 94
quick note 93–94
reading, text 87–90
receiving, text 86–87
reminders, receiving 84,
87
reminders, turning on/off
104
sending 32, 91–93
sound 90
status 94
179
Index
message (continued)
text 85–94
voicemail 83–84
message waiting indicator
defined 24
displayed 87
illustration 23
micro-browser
using 114–115
microphone 1
missed call indicator 29
Missed Call message 29
missed call, dialing 32
muting a call 34
my telephone number 22,
34, 51
my tones 97–104
My Tones Menu 102, 104
network settings 57
notepad
defined 61
entering digits 61
retrieving digits 61
number, viewing your own
51
numeric text mode 39
180
one-touch dial
defined 31
using 31
voicemail number 31
optional accessory,
defined 10
optional feature, defined
10
outbox 50, 94
passwords. See codes
pause character 68
phone
active line indicator 24
alert, turning off 30
answer options 53
codes 137–138
connecting to external
device 131–133
erase user-entered
information 57
feature specifications
34, 52
information 34
keypad, locking and
unlocking 53,
140
locking 139–140
muting a call 34
phonebook (continued)
deleting an entry 71
dialing a number 70
editing an entry 71
email address 64
entry details 64
entry name 64
number type indicator
64
one-touch dial 31
phone number 64
prefix digits, inserting
32
primary number, setting
71
ringer ID,
activating/deactiv
ating 96
ringer ID, defined 66, 96
ringer ID, setting 66
sending an email 70
sorting entries 73
speed dial number 64,
66
speed dial number,
defined 31
speed dial, using 31
storing an entry 65–67
voice name entry 69
voice name indicator 64
PIN code 67
power key 1, 21
Index
phone (continued)
reset all options 56
secure connection 28,
142
security code 137
specifications 34, 52
turning on/off 21
unlock code 21, 137,
138
unlocking 21, 139–140
voice dial 32
phone number
active line indicator 24
active phone line,
changing 52
adding digits after 60
attaching to prefix digits
32
attaching two numbers
60
redialing 28
seeing your own 22, 34
sending text message to
32
storing in phonebook
65–67
viewing your own 51
voice dial 32
phonebook
attaching two numbers
60
capacity, checking 72
181
predictive text entry 44–47
privacy, call 28, 142
Index
quick dial
changing number(s) 55
using 49
quick note 93–94
defined 85
radio 80–82
received calls list 32, 34,
59–60
recent calls 59–60
redial
busy number 28
reminders
datebook 77
defined 104
text message 87
turning on/off 104
voicemail message 84
restricting calls 140–141
right soft key
customizing 124
functions 1, 23, 35
ring alert
selecting 95–96
turning off 30
182
ring style
customizing 95–97
defined 95
indicators 25, 95
setting 95
ring style indicator
defined 25, 95
illustration 23
ringer
volume, adjusting 25
volume, setting 97
ringer ID
activating/deactivating
96
defined 66, 96
listed in phonebook
entry 64
setting for phonebook
entry 66
roam indicator
defined 24
illustration 23
scroll feature 55
scroll keys 1, 35
secure connection 28, 142
security code
changing 137–138
send key 1, 21, 22, 59
short message service.
See text message
symbol text mode 43–44
symbols, entering 43–44
Talk Secure feature 28,
142
tap method text entry
40–42
telephone number, viewing
your own 51
text
block cursor 38
browse mode 39
character chart 42
entering from keypad
39–47
entry mode, changing
39
flashing cursor 38
iTAP software predictive
text entry 44–47
numeric mode 39
symbol chart 43
symbol mode 43–44
tap method 40–42
text message
defined 85
deleting 87–90
dialing number from 31
drafts folder 50
inbox setup 85–86
locking 87–90
Index
shortcuts
creating 105–106
standard 105
using 107
signal strength indicator
defined 24
illustration 23
silent alert indicator 25
silent ring style indicator
25, 95
SMS. See text message
soft keys
customizing 124
functions 23, 35
illustration 1
labels 23
soft ring style indicator 25,
95
sound
storing 90
speakerphone, activating
34
speed dial
changing number 66
number, defined 31
sorting phonebook
entries by 73
using 31
standby time, increasing
27
storing a call 59–60
183
Index
text message (continued)
outbox 50
quick note 93–94
reading 87–90
receiving 86–87
reminders 87
sending 32, 91–93
sound 90
status 94
text mode, changing 39
three-way call 33
time, setting 55
timers 61–63
resetting 63
viewing 63
travel charger, using 20
TTY device 125–127
unlock
keypad 53, 140
phone 139–140
unlock code 138
bypassing 138
changing 137–138
entering 21, 139, 140
184
vibrate alert
selecting 95–96
turning off 30
vibrate and ring style
indicator 25, 95
vibrate ring style
setting 95
vibrate style
indicator 25, 95
video poker 122–123
voice dial
dialing a number 32, 70
recording voice name
69
voice key
dialing a number 32
functions 1
recording a voice name
69
recording a voice note
108
voice message waiting
indicator 23, 24, 84
voice name
defined 69
phonebook indicator 64
recording 69
voice notes 108–113
Index
voice shortcut
creating 105–106
defined 105
using 107
voicemail
dialing with one-touch
dial 31
reminders, turning on/off
104
using 83–84
volume
earpiece 25
keypad 97
ringer 25, 97
volume keys 1, 25
wait character 68
warranty 166–172
Web pages 114–115
zoom setting 55
zooming in/out 25
U.S. patent Re. 34,976
185
186
Index
✂
Wireless Phone Safety
Tips
“Safety is your most important call!”
Your Motorola wireless telephone gives you
the powerful ability to communicate by voice—
almost anywhere, anytime, wherever wireless
phone service is available and safe conditions allow.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first
responsibility. If you find it necessary to use your
wireless phone while behind the wheel of a car,
practice good common sense and remember the
following tips:
1 Get to know your Motorola wireless phone and its
features such as speed dial and redial. If available,
these features help you to place your call without taking
your attention off the road.
187
3 Position your wireless phone within easy reach. Be
able to access your wireless phone without removing
your eyes from the road. If you receive an incoming call
at an inconvenient time, if possible, let your voice mail
answer it for you.
4 Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
5 If you receive an incoming call at an inconvenient
time do not take notes or look up phone numbers
while driving. Jotting down a “to do” list or going
through your address book takes attention away from
your primary responsibility—driving safely.
6 Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving,
dial only a few numbers, check the road and your
mirrors, then continue.
7 Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and suspend
conversations which have the potential to divert your
attention away from the road.
188
✂
2 When available, use a hands-free device. If possible,
add an additional layer of convenience to your wireless
phone with one of the many Motorola Original™ handsfree accessories available today.
✂
8 Use your wireless phone to call for help. Dial 9-1-1 or
other local emergency number in the case of fire, traffic
accident or medical emergencies.*
9 Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as
you would want others to do for you.*
10 Call roadside assistance or a special
non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other
special non-emergency wireless number.*
* Wherever wireless phone service is available.
189
For more information,
please call
1-888-901-SAFE
or visit the
CTIA Web site at
www.wow-com.com™
ITC00-011
190
✂
Check the laws and regulations on the use of
wireless telephones and their accessories in the
areas where you drive. Always obey them. The
use of these devices may be prohibited or
restricted in certain areas.
motorola.com
8988485L49-O

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : 
Create Date                     : 2002:05:14 22:12:06
Title                           : CA-EX08A.PDF
Author                          : wlab00
Producer                        : Acrobat PDFWriter 3.02 for Windows NT
Subject                         : 
Modify Date                     : 2002:05:14 22:13:55
Page Count                      : 195
EXIF Metadata provided by EXIF.tools
FCC ID Filing: IHDT56CA1

Navigation menu