Motorola Mobility T56CM1 Portable Cellular/ PCS Transceiver (AMPS/CDMA) User Manual Exhibit 8 Preliminary Users Manual Draft

Motorola Mobility LLC Portable Cellular/ PCS Transceiver (AMPS/CDMA) Exhibit 8 Preliminary Users Manual Draft

Contents

Exhibit 8 Preliminary Users Manual Draft

APPLICANT:  MOTOROLA, INC. FCC ID: IHDT56CM1EXHIBIT 8INSTRUCTION MANUALA preliminary draft copy of the Users Manual follows:
PRELIMINARYMotorola V60x(Phoenix)CDMA R1.2VerizonMobile Phone User GuidePreliminary Review DraftAugust 2, 2002
PRELIMINARY
1PRELIMINARYWelcomeWelcome to the world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola V60x wireless phone.Earpiece Headset JackInsert headsetaccessory forhands-free use.Status LightSee incoming calland service status.Volume KeysAdjust earpieceand ringer volume.Smart KeySelect menu items,send and end calls.Voice KeyRecord voice notes,phonebook andshortcut names.Display Microphone AccessoryConnector PortInsert charger andphone accessories.Power Key Right Soft KeyPerform functionsidentified by rightdisplay prompt.Menu Key End KeyEnd phone calls,exit menu system.Scroll KeyMove throughmenus and lists.Left Soft KeyPerform functionsidentified by leftdisplay prompt.Send KeySend and answercalls, view recentdialed calls list.
2PRELIMINARYPersonal Communications Sector600 North U.S. Highway 45Libertyville, Illinois 600481-800-331-6456 (United States)1-888-390-6456 (TTY/TDD United States)1-800-461-4575 (Canada)www.motorola.com (United States)www.motorola.ca (Canada)MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. TrueSync, Sidekick, Starfish, and the Stylized Starfish Logo are registered trademarks of Starfish Software, Inc., a wholly owned independent subsidiary of Motorola, Inc. All other product or service names are the property of their respective owners.© 2001, 2002 Motorola, Inc. All rights reserved.Software Copyright NoticeThe Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.Manual number: XXXX-O Cover number: 8988485L49-O
3PRELIMINARYMenu MapMain Menu• Recent Calls• Received Calls• Dialed Calls• Notepad• Call Times• Phonebook• Datebook•Radio*• Messages•Voicemail• Create Message•Inbox• Outbox• Quick Notes•Drafts• Browser Alerts•Shortcuts• Voice Notes•Browser• Calculator• Picture Viewer•GetItNow•Settings(see next page)ShortcutsChange display zoom:Press M, thenpress and hold MDisplay my phone number:Press M#Dial voicemail number:Press and hold 1Go to dialed calls list:Press NExit menu system:Press O* This is the standard phone menu layout. Menu organization and feature names may vary on your phone. Not all features may be available for all users.For example, the Radio option (left) is available only when the optional FM Stereo Radio Headset accessory is plugged into your phone.
4PRELIMINARYSettings Menu•Ring Styles•Style•Style Detail• My Tones• Phone Status•My Tel. Number• Active Line• Battery Meter• Other Information•Browser Setup• In-Call Setup• In-Call Timer• Answer Options• Security• Phone Lock• Lock Application• Restrict Calls•New Passwords• Location• Other Settings• Initial Setup• Time and Date• Auto PIN Dial• Auto Redial• Backlight• Status Light•Zoom• TTY Setup•Scroll• Animation• Language• Contrast•DTMF•Master Reset• Master Clear• Personalize•Main Menu•Keys•Greeting• Banner• Connection•Network• Car Settings• Headset
5PRELIMINARYContentsMenu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   10Safety and General Information. . . . . . . . . . . . . . . . . . .   11Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   17What’s in the Box?. . . . . . . . . . . . . . . . . . . . . . . . . . . . .   17Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . .   17Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . .   18Changing the Convertible Covers . . . . . . . . . . . . . . . . .   19Turning Your Phone On . . . . . . . . . . . . . . . . . . . . . . . . .   21Making a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   21Ending a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   22Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   22Seeing Your Phone Number . . . . . . . . . . . . . . . . . . . . .   22About Your Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   23Using the Display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   23Zooming In and Out. . . . . . . . . . . . . . . . . . . . . . . . . . . .   25Using the Status Light . . . . . . . . . . . . . . . . . . . . . . . . . .   25Adjusting Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   26Using the Smart Key . . . . . . . . . . . . . . . . . . . . . . . . . . .   26Using the External Display  . . . . . . . . . . . . . . . . . . . . . .   27Battery Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   28Making and Answering Calls. . . . . . . . . . . . . . . . . . . . .   30Redialing a Number. . . . . . . . . . . . . . . . . . . . . . . . . . . .   30Using Automatic Redial . . . . . . . . . . . . . . . . . . . . . . . . .   30Using Caller ID  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   31Returning an Unanswered Call . . . . . . . . . . . . . . . . . . .   31Calling an Emergency Number . . . . . . . . . . . . . . . . . . .   32Turning Off a Call Alert . . . . . . . . . . . . . . . . . . . . . . . . .   32
6PRELIMINARYCanceling an Incoming Call  . . . . . . . . . . . . . . . . . . . . . . 32Calling With Speed Dial  . . . . . . . . . . . . . . . . . . . . . . . . . 33Calling With One-Touch Dial. . . . . . . . . . . . . . . . . . . . . . 33Calling a Number In a Text Message  . . . . . . . . . . . . . . . 34Additional Calling Features . . . . . . . . . . . . . . . . . . . . . . . 34Using Features While On a Call . . . . . . . . . . . . . . . . . . . 36Using Call Waiting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . 36Additional On-Call Features . . . . . . . . . . . . . . . . . . . . . . 37Using the Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Navigating to a Feature. . . . . . . . . . . . . . . . . . . . . . . . . . 38Selecting a Feature Option . . . . . . . . . . . . . . . . . . . . . . . 39Entering Feature Information  . . . . . . . . . . . . . . . . . . . . . 40Entering Text. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Choosing a Text Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . 42Using Tap Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Using Symbol Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Using iTAP™ Software Predictive Text Entry Method . . . 47Menu Feature Descriptions. . . . . . . . . . . . . . . . . . . . . . . 51Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Viewing Received Calls or Dialed Calls  . . . . . . . . . . . . . 64Using the Notepad  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Viewing and Resetting Call Timers . . . . . . . . . . . . . . . . . 66Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Viewing Entry Details . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Storing a Phonebook Entry. . . . . . . . . . . . . . . . . . . . . . . 69Storing a PIN Code With the Phone Number . . . . . . . . . 71Recording a Voice Name For a Phonebook Entry  . . . . . 73Dialing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . . 74Editing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . . 75Deleting a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . 75
7PRELIMINARYSorting the Phonebook List . . . . . . . . . . . . . . . . . . . . . .   75Synchronizing with TrueSync Software . . . . . . . . . . . . .   76Picture Viewer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   77Datebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   79Week View  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   79Day View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   80Event View  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   80Adding a Datebook Event . . . . . . . . . . . . . . . . . . . . . . .   81Changing Event Information . . . . . . . . . . . . . . . . . . . . .   81Copying an Event  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   82Deleting an Event  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   83Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   83Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   86Turning the Radio On and Off . . . . . . . . . . . . . . . . . . . .   86Tuning a Station. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   87Storing a Preset  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   87Selecting a Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   87Sending and Receiving Calls With the Radio On  . . . . .   87Messages—Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . .   89Storing Your Voicemail Number. . . . . . . . . . . . . . . . . . .   89Receiving a Voicemail Message . . . . . . . . . . . . . . . . . .   90Listening to a Voicemail Message . . . . . . . . . . . . . . . . .   90Turning Off the Voice Message Waiting Indicator . . . . .   90Messages—Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   91Setting Up the Text Message Inbox. . . . . . . . . . . . . . . .   91Receiving a Text Message  . . . . . . . . . . . . . . . . . . . . . .   92Reading, Locking, or Deleting a Text Message . . . . . . .   92Storing Pictures, Animations, and Sounds  . . . . . . . . . .   94Reading Browser Alerts  . . . . . . . . . . . . . . . . . . . . . . . .   97Reading Information Service Messages . . . . . . . . . . . .   98Sending a Text Message . . . . . . . . . . . . . . . . . . . . . . .   103
8PRELIMINARYSending a Quick Note Text Message . . . . . . . . . . . . . . 106Inserting Pictures, Animations, and Sounds . . . . . . . . . 107Viewing the Status of Sent Text Messages. . . . . . . . . . 109Ring Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Selecting a Ring Style. . . . . . . . . . . . . . . . . . . . . . . . . . 110Customizing a Ring Style . . . . . . . . . . . . . . . . . . . . . . . 110Creating Alert Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Setting Reminders  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Standard Shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Creating a Shortcut. . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Using Shortcuts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Voice Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Recording a Voice Note  . . . . . . . . . . . . . . . . . . . . . . . . 122Viewing the Voice Notes List. . . . . . . . . . . . . . . . . . . . . 123Playing a Voice Note. . . . . . . . . . . . . . . . . . . . . . . . . . . 124Locking and Unlocking a Voice Note. . . . . . . . . . . . . . . 126Deleting a Voice Note . . . . . . . . . . . . . . . . . . . . . . . . . . 127Micro-Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Starting a Micro-Browser Session  . . . . . . . . . . . . . . . . 128Interacting With Web Pages . . . . . . . . . . . . . . . . . . . . . 129Downloading Pictures, Animations, and Sounds  . . . . . 129Running the Micro-Browser in the Background. . . . . . . 131Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Calculating Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . 132Converting Currency. . . . . . . . . . . . . . . . . . . . . . . . . . . 134Get It Now . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135Launching an Application . . . . . . . . . . . . . . . . . . . . . . . 135Editing Network Connection Settings . . . . . . . . . . . . . . 135Using Control Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Analyzing or Deleting an Application  . . . . . . . . . . . . . . 136
9PRELIMINARYAdjusting Your Settings. . . . . . . . . . . . . . . . . . . . . . . .   137Reordering Menu Items. . . . . . . . . . . . . . . . . . . . . . . .   137Customizing a Soft Key Function  . . . . . . . . . . . . . . . .   137Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   138Hiding or Showing Location Information . . . . . . . . . . .   139TTY Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   140Hands-Free Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   142Data and Fax Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . .   145Making a Cable Connection  . . . . . . . . . . . . . . . . . . . .   145Synchronizing Data . . . . . . . . . . . . . . . . . . . . . . . . . . .   147Sending a Data or Fax Call . . . . . . . . . . . . . . . . . . . . .   147Receiving a Data or Fax Call. . . . . . . . . . . . . . . . . . . .   148Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   150Assigning a New Code or Password . . . . . . . . . . . . . .   150If You Forget a Code or Password. . . . . . . . . . . . . . . .   151Locking and Unlocking Your Phone. . . . . . . . . . . . . . .   152Restricting Calls  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   153Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   155Programming Instructions. . . . . . . . . . . . . . . . . . . . . .   164Specific Absorption Rate Data . . . . . . . . . . . . . . . . . .   166Additional Health and Safety Information . . . . . . . . .   168Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   176Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . .   181Export Law Assurances. . . . . . . . . . . . . . . . . . . . . . . .   181Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   182Wireless Phone Safety Tips. . . . . . . . . . . . . . . . . . . . .   195
10PRELIMINARYAbout This GuideThis user guide introduces you to the many features in your Motorola wireless phone.Navigating To a Menu FeatureUse the menu system to access your phone’s features. This guide shows you how to select a menu feature as follows:This example shows that you must press M, scroll to and select Messages, then scroll to and select Create Message.Optional FeaturesThis label identifies an optional network or subscription-dependent feature that may not be offered by all service providers in all geographical areas. Contact your service provider for more information.Optional AccessoriesThis label identifies a feature that requires an optional Motorola Original™ accessory.Find the FeatureM>Messages >Create Message
11PRELIMINARYSafety and General InformationIMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR PHONE.The information provided in this document supersedes the general safety information contained in user guides published prior to July 2000. For information regarding radio use in a hazardous atmosphere please refer to the Factory Mutual (FM) Approval Manual Supplement or Instruction Card, which is included with radio models that offer this capability.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.RF Operational CharacteristicsYour phone contains a transmitter and a receiver. When it is ON, it receives and transmits radio frequency (RF) energy. The phone operates in the frequency range of 824 MHz to 849 MHz in analog and digital mode and 1851.25 MHz to 1908.75 MHz in digital mode.When you communicate with your phone, the system handling your call controls the power levels at which your phone transmits. The output power level typically may vary over a range from 0.05 watts to 0.56 watts in analog mode and 0.0 watts to 0.32 watts in digital mode.Exposure To Radio Frequency EnergyYour Motorola phone is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:
12PRELIMINARY•United States Federal Communications Commission, Code of Regulations; 47 CFR part 2 sub-part J•American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992•Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition•National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986•International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998•Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999•Australian Communications Authority Radiocommunications (Electromagnetic Radiation-Human Exposure) Standard 1999To assure optimal phone performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:Portable Phone Operation and EME ExposureAntenna CareUse only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations.Do NOT hold the antenna when the phone is in use. Holding the antenna affects call quality and may cause the phone to operate at a higher power level than needed.Phone OperationWhen placing or receiving a phone call, hold your phone as you would a wireline telephone. Speak directly into the microphone.
13PRELIMINARYBody-Worn OperationTo maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a phone on your body when transmitting, always place the phone in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RF exposure guidelines. If you do not use one of the Motorola-supplied or approved body-worn accessories, and are not using the phone held in the normal use position, ensure the phone and its antenna are at least one inch (2.5 centimeters) from your body when transmitting.Data OperationWhen using any data feature of the phone, with or without an accessory cable, position the phone and its antenna at least one inch (2.5 centimeters) from your body.Approved AccessoriesFor a list of approved Motorola accessories, visit our website at www.mot.com.Electromagnetic Interference/CompatibilityNote: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.FacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your phone in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your phone when on board an aircraft. Any use of a phone must be in accordance with applicable regulations per airline crew instructions.
14PRELIMINARYMedical DevicesPacemakersThe Advanced Medical Technology Association recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless phone and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of, the United States Food and Drug Administration.Persons with pacemakers should:•ALWAYS keep the phone more than six inches (15 centimeters) from your pacemaker when the phone is turned ON.•NOT carry the phone in the breast pocket.•use the ear opposite the pacemaker to minimize the potential for interference.•turn OFF the phone immediately if you have any reason to suspect that interference is taking place.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
15PRELIMINARYSafety and General Use While DrivingCheck the laws and regulations on the use of phones in the area where you drive. Always obey them.When using your phone while driving, please:•give full attention to driving and to the road.•use hands-free operation, if available.•pull off the road and park before making or answering a call if driving conditions so require.Operational WarningsFor Vehicles With an Air BagDo not place a portable phone in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable phone is placed in the air bag deployment area and the air bag inflates, the phone may be propelled with great force and cause serious injury to occupants of the vehicle.Potentially Explosive AtmospheresTurn off your phone prior to entering any area with a potentially explosive atmosphere, unless the phone is a model specifically identified as being “Intrinsically Safe.” Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted.
16PRELIMINARYBlasting Caps and AreasTo avoid possible interference with blasting operations, turn OFF your phone when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.Operational CautionsAntennasDo not use any portable phone that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result.BatteriesAll batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.ITC01-101
17PRELIMINARYGetting StartedGetting StartedWhat’s in the Box?Your wireless phone typically comes equipped with a battery and a charger. Other accessory options can customize your phone for maximum performance and portability.To purchase Motorola Original™ accessories, contact the Motorola Customer Call Center at 1-800-331-6456 in the United States or 1-800-461-4575 in Canada.Installing the BatteryYou must install and charge the battery to use your phone.Your phone is designed to be used only with Motorola Original batteries and accessories. We recommend that you store batteries in their protective cases when not in use.Do This1Remove the battery from its protective clear plastic case.2If necessary, push down the battery door release latch and lift the door off of the phone. Release latch
18PRELIMINARYGetting StartedCharging the BatteryNew batteries are shipped partially charged. Before you can use your phone, you need to install and charge the battery, as indicated by the following instructions. Some batteries perform best after several full charge/discharge cycles. 3Insert the battery, printed arrow first, under the tab at the top of the battery compartment and push down. 4Insert the ridge at the bottom of the battery door into the base of the phone, then push the door down and snap it into place. Do This1Plug the travel charger into your phone with the release tab facing up. Do ThisRelease tab
19PRELIMINARYGetting StartedNote: When you charge the battery, the battery level indicator in the upper right corner of the display shows how much of the charging process is complete.Changing the Convertible CoversYou can replace the flip cover and battery cover on your phone to personalize its appearance. Matching front and back cover sets are available in a variety of colors and designs. Your phone is designed to be used only with Motorola Original accessories. See your Motorola retailer for these convertible covers.2Plug the other end of the travel charger into the appropriate electrical outlet.3When your phone indicates that the battery is fully charged (Charge Complete), press the release tab and remove the travel charger.Do This
20PRELIMINARYGetting StartedRemove a Flip CoverAttach a Flip CoverDo This1Open your flip phone half way.2Press in the tiny silver release button with your fingernail. This button is on the side of the top half of the phone.3While pressing the silver button in, slide the cover off the phone. Do This1Close your flip phone.2Line up the ridges on each side of the cover so that they align with the slots on the phone. 3Slide the cover onto the phone until it snaps into place.
21PRELIMINARYGetting StartedTurning Your Phone OnMaking a CallDo This To1Open your phone expose the keypad2Press and hold Pturn on your phone3If necessary, enter your four-digit unlock code and press OK(+)unlock your phoneThe unlock code is originally set to 1234. Your service provider may change this number before you receive your phone.Do This To1Extend the antennaoptimize signal receptionTip: You may have to pull on the antenna a second time to fully extend it.Powerkey
22PRELIMINARYGetting StartedEnding a CallAnswering a CallWhen you receive a call, your phone rings and/or vibrates and displays an incoming call message.Tip: If your phone is locked, you must unlock it to answer the call.Seeing Your Phone Number2Press the keypad keysdial the phone numberTip: If you make a mistake, press DELETE(-) to delete the last digit, or press and hold DELETE(-) to clear all digits.3Press Nmake the callPress ToO end the callPress ToN or ANSWER(+)answer the callPress ToM#see your phone numberDo This To
23PRELIMINARYAbout Your PhoneAbout Your PhoneSee page 1 for a basic phone diagram.Using the DisplayThe idle display is the standard display that you see when you are not on a call or using the menu.Labels at the bottom corners of the display show the current soft key functions. A M (menu) indicator at the bottom center of the display indicates that you can press M to enter the main menu.12:00amF PH.BOOK MESSAGEMO,N&5EèwPClock➐BatteryLevelIndicator➌In UseIndicator➍RoamIndicator➎Location Indicator➏MessageWaitingIndicator➓Ring StyleIndicator➊SignalStrengthIndicator➋Digital/AnalogSignalIndicator➑ActivelineIndicator➒MenuIndicatorSoft Key Labels
24PRELIMINARYAbout Your Phone➊ Signal Strength Indicator  Vertical bars show the strength of the network connection. You cannot make or receive calls when the j (no signal) indicator is displayed.➋ Digital (F) or Analog (I) Signal Indicator  Shows whether you are receiving a digital or analog signal.➌ In Use Indicator  Shows that a call is in progress.➍ Roam Indicator  Shows that your phone is seeking or using another network system outside your home network.➎ Location Information Indicator  Indicates when your Location Information is availableN or unavailableM.➏ Message Waiting Indicator  Appears when you receive a voicemail or text message.➐ Battery Level Indicator  Vertical bars show the battery charge level. Recharge the battery when you see Low Battery and hear the low battery alert.➑ Active Line Indicator  Shows the current active phone line.➒ Menu Indicator  Indicates that you can press M to enter the main menu or open a feature sub-menu.
25PRELIMINARYAbout Your Phone➓ Ring Style Indicator  Shows the ring style setting.Zooming In and OutPress and release M, then press and hold M to zoom in and out on the display. Zoom in to increase text size, zoom out to display more information.You can also zoom in and out from the menu. See page 58.Using the Status LightThe status light shows when you have an incoming call or message, or when your phone is roaming (using a non-home system).The status light initially is turned off to extend battery life. To turn it on, see “Initial Setup” on page 58.w= loud ringx=soft ringy=vibrateu= vibrate and ringt= silentIndication Statusalternating red/green incoming callflashing green in service, home systemflashing yellow roaming, non-home systemflashing red no serviceStatus light
26PRELIMINARYAbout Your PhoneNote: Turning on the status light will substantially reduce your phone’s standby time, the length of time that your phone’s battery retains power when the phone is turned on but is not in use.Adjusting VolumePress the up and down volume keys to:•increase and decrease earpiece volume during a call•increase and decrease the ringer volume setting when the idle display is visible (flip must be open)Using the Smart KeyThe smart key gives you another way to perform many basic phone functions. It anticipates the next action you are likely to perform. For example, when you highlight a menu item, you can press the smart key to select it. You can use the smart key to make and end calls, toggle features on and off, and open your phonebook. The smart key usually performs the same function as the right soft key (+).VolumekeysSmartkeyExternaldisplay
27PRELIMINARYAbout Your PhoneNote: The smart key provides an optional way to do some things faster. It is never the only way to perform a task.Using the External DisplayWhen the flip is closed, the external display shows the time and date. It also displays messages to notify you of incoming calls and other events. You can perform the following functions in the external display.Set Phone Ring StyleReturn an Unanswered CallYour phone keeps a record of your unanswered calls and displays X Missed Calls in the external display.Note: Because the microphone and earpiece are unavailable when the phone is closed, you must use a headset or other hands-free device with this feature.Press To1volume keys scroll to Style2smart key select a ring style3volume keys return to the idle displayPress To1smart key see the received calls list2volume keys scroll through the list and select a call to return3smart key make the call
28PRELIMINARYAbout Your PhoneBattery UseBattery performance depends on many factors, including your wireless carrier’s network configuration; signal strength; the temperature at which you operate your phone; the features and/or settings you select and use; and your voice, data, and other application usage patterns.Battery CareCaution: To prevent injuries or burns, do not allow metal objects to contact or short-circuit the battery terminals.To maximize your battery’s performance:•Always use Motorola Original™ batteries and battery chargers. The phone warranty does not cover damage caused from using non-Motorola batteries and/or battery chargers.•New batteries or batteries that have been stored for long periods of time may require a longer charge time.•Maintain the battery at or near room temperature when charging.•Do not expose batteries to temperatures below -10°C (14°F) or above 45°C (113°F). Always take your phone with you when you leave your vehicle.•When you do not intend to use a battery for a while, store it uncharged in a cool, dark, dry place, such as a refrigerator.•Over extended periods of time, batteries gradually wear down and require longer charging times. This is
29PRELIMINARYAbout Your Phonenormal. If you charge your battery regularly and notice a decrease in talk time or an increase in charging time, then it is probably time to purchase a new battery.The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. Refer to your battery’s label for battery type. Contact your local recycling center for proper disposal methods. Never dispose of batteries in a fire because they may explode.Extending Battery Life• Turn off the status lightThe status light uses power. To turn it off, see “Initial Setup” on page 58.• Turn off the display backlightThe backlight uses power. To turn it off, see “Initial Setup” on page 58.• Minimize keypad-intense functionsActivities that require intensive keystroke use (such as playing a game or using messaging) reduce your phone’s talk and standby time.
30PRELIMINARYMaking and Answering CallsMaking and Answering CallsFor basic instructions on how to make a call, end a call, and answer a call, see pages 21–22.Redialing a NumberIf you hear an ordinary busy signal:Using Automatic RedialIf the network is busy, you hear a fast busy signal, and your phone displays Call Failed.With automatic redial, your phone automatically redials the number for four minutes. When the call goes through, your phone rings or vibrates one time, displays Redial Successful, and then connects the call.You must turn on automatic redial to use the feature. See the “Auto Redial” option on page 58.Press To1O hang up2N redial the busy number
31PRELIMINARYMaking and Answering CallsWhen automatic redial is turned off, you can manually activate the feature to redial a phone number. When you hear a fast busy signal and see Call Failed:Using Caller IDCalling line identification (caller ID) displays the phone number for incoming calls.The phone displays the caller’s name when the name is stored in your phonebook, or Incoming Call when caller ID information is not available.Returning an Unanswered CallYour phone keeps a record of your unanswered calls, and displays:•the T (missed call) indicator•X Missed Calls Y Unknown, where X is the total number of missed calls and Y is the number of missed calls with no caller ID informationPress ToN or RETRY(+)activate automatic redialPress To1VIEW(+) see the received calls list2S select a call to return3N make the call
32PRELIMINARYMaking and Answering CallsCalling an Emergency NumberYour service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked.Note: Emergency numbers vary by country. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.Turning Off a Call AlertYou can turn off your phone’s incoming call alert before answering the call.Canceling an Incoming CallWhile the phone is ringing or vibrating:Press To1keypad keys dial the emergency number2N call the emergency numberPress Toeither volume key turn off the alertPress ToO or IGNORE(-)cancel the incoming call
33PRELIMINARYMaking and Answering CallsDepending on your phone settings and/or service subscription, the call may be forwarded to another number, or the caller may hear a busy signal.Calling With Speed DialEach entry you store in your phonebook is assigned a unique speed dial number. To speed dial a phonebook entry:Calling With One-Touch DialTo call phonebook entries 1 through 9, just press and hold the one-digit speed dial number for one second.We recommend that you reserve phonebook entry 1 (speed dial number 1) for storing and dialing your voicemail number. In many cases, your service provider has already done this for you. If necessary, see page 69 to store your voicemail number for one-touch dial access.Press To1keypad keys enter the speed dial number for the entry you want to call2# submit the numberNote: Some networks let you skip this step for speed dial numbers 1 through 99.3N call the entry
34PRELIMINARYMaking and Answering CallsCalling a Number In a Text MessageTo call a phone number embedded in a text message that you receive:Additional Calling FeaturesWhile dialing (with digits visible in the display), open the Dialing Menu to perform the following tasks:Press To1M open the Text Msg Menu2S scroll to Call Back3SELECT(+) call the numberPress ToM >Attach Numberattach a number from the phonebook or recent call listsM >Send Messageopen a new text message with the number in the To field
35PRELIMINARYMaking and Answering CallsYou can also call a number using these features:Do This To CallPress and release the voice key, then say a voice namea phonebook entry using voice dialTo record a voice name, see page 73.Press M >Recent Calls >Received Calls or Dialed Calls > entry to calla missed call, or a recent received or dialed callVoice key
36PRELIMINARYUsing Features While On a CallUsing Features While On a CallUsing Call WaitingWhen you are on a call, an alert tone sounds to indicate that you have received a second call.Making a Three-Way CallDuring a call, you can call and connect a third party for a three-way call. You cannot do this if you already have a call on hold.Press To1N answer the new call2N switch back to the first callPress To1keypad keys dial the third party’s numberNote: Some networks may require you to press N first.2N call the number3N connect the two calls4O end the entire call
37PRELIMINARYUsing Features While On a CallAdditional On-Call FeaturesPress ToMUTE(+) (if available) or M>Mutemute the callSPEAKER(+) (if available) or M>Spkrphone Onactivate an attached speakerphone during an active callM >My Tel. Numbersee your phone numberM >Send Tonessend a number to the network as DTMF tones, for credit card or password callsTo activate DTMF tones, see the “DTMF” option on page 5959.M >Received Calls or Dialed Callsview recent received or dialed call numbersM >Messagesview or send messagesM >Datebookview datebook entriesM >Other Informationview phone specifications
38PRELIMINARYUsing the MenuUsing the MenuNavigating to a FeatureUse these keys to move through the menu system:Main Menu Recent Calls Service DialEXIT             SELECTMenu KeyEnter menu system,or open a sub-menu, when M appears inbottom center ofdisplay.Right Soft KeyPerform function shown in lowerright corner ofdisplay (usuallySELECT the highlightedmenu item).Left Soft KeyPerform function shown in lowerleft corner ofdisplay (usuallyEXIT or BACK).Scroll KeyScroll up or downthrough menusand lists. Fromidle display,press up ordown to openphonebook.*and#Cycle throughand set thevalue of thehighlightedmenu item.End KeyExit menu systemwithout makingchanges, returnto idle display.Volume KeysScroll up ordown throughmenus and lists.
39PRELIMINARYUsing the MenuSelecting a Feature OptionSome features require you to select an item from a list:•Press S to scroll up or down to highlight the item you want.•In a numbered list, press a number key to highlight the item.•In an alphabetized list, press a key multiple times to cycle through the letters on the key and highlight the closest matching list item.Dialed Calls10) John Smith9) Mary SmithBACK VIEWPressBACK(-)to go back tothe previousscreen.Press M toopen the sub-menu.HighlighteditemPress VIEW(+) to viewdetails of the highlighted item.M
40PRELIMINARYUsing the MenuEntering Feature InformationSome features require you to enter information:•Enter numbers or text with the keypad.•When an item has a list of possible values, press *or# to scroll through and select a value.•When an item has a list of possible values, press S to the left or right to scroll through and select a value.•When an item has a list of possible numeric values, press a number key to set the value.•If you enter or edit information and do not want to save your changes, press O to exit without saving.Entry DetailsName:John Smith No.:2125551212CANCEL CHANGEPress S toscroll downto additionalitems.Press CANCEL(-) to exitwithout making changes.DONE(-) appears whenyou enter or edit information. PressCHANGE(+)to edit theinformation.Highlighteditem
41PRELIMINARYUsing the MenuThe message center lets you compose and send text messages. A flashing cursor shows where text will appear:When you enter text using the standard tap method, the flashing cursor changes to a block cursor, and the soft key functions change:Msg:CANCEL BROWSEPressBROWSE(+)to view andinsert aquick note.Press CANCEL(-) to exitwithout making changes.Flashingcursorindicatesinsertionpoint.Press M to openthe sub-menu.M Msg:T DELETE OKPressOK(+)to acceptand storethe text.Press DELETE(-)to delete the characterto the left of the insertionpoint.Blockcursorindicatescurrenthighlightedcharacter.After two seconds, theblock cursor reverts to aflashing cursor and movesto the next position.M
42PRELIMINARYEntering TextEntering TextMultiple text entry methods make it easy for you to enter names, numbers, and messages on your phone.Choosing a Text ModePress M from any text entry screen to select a text mode:Note: The text mode you select remains active until you change it by selecting another mode.iTAP  Let the phone predict each word as you enter it. See page 47.Tap Method  Enter letters, numbers, and symbols by pressing a key one or more times. See page 43.Numeric  Enter numbers only.Symbol  Enter symbols only. See page 46.Browse  Browse your phonebook or recent call lists to select a name or number.
43PRELIMINARYEntering TextUsing Tap MethodThis is the standard mode for entering text on your phone.Press M from any text entry screen and select the Tap Method menu option.Do This To1Press a number key one or more timesselect a letter, number, or symbol shown in the “Character Chart” on page 452Continue pressing number keysenter the remaining characters3Press OK(+) store the text when you are finished
44PRELIMINARYEntering TextGeneral Text Entry RulesPress a number key repeatedly to cycle through its characters. See “Character Chart” on page 45.•If you do not press a key for two seconds, the character in the block cursor is accepted, and the cursor moves to the next position.•The first character of every sentence is capitalized. (Press S down to force the character to lowercase while it is highlighted by the block cursor).Msg:CANCEL       BROWSEChangeletter inblock cursorto uppercaseor lowercase.Press a numberkey as manytimes asnecessaryto enter thedesiredcharacter atflashing cursorlocation.Press and holda number keyto cyclebetween textentry modes.Move flashingcursor to theleft or right intext message.
45PRELIMINARYEntering Text•Your phone may support multiple languages. The current language setting determines whether a new message begins on the left or right side of the display.You can switch languages within a message. Press M to select the text mode and language you want to use.Character ChartUse this chart as a guide for entering spaces, letters, numbers, and symbols with the tap method.Note: This chart may not reflect the exact character set available on your phone.1 space . 1 ? ! , @ _ & ~ : ; " -( ) ' ¿ ¡ % £ $ ¥  2 a b c 2 ä å á à â ã α β ç3 d e f 3 δ ë é è ê ε φ4  g h i 4 ï í î γ η ι5  j k l 5 κ λ6  m n o 6 ñ ö ø ó ò ô õ µ υ ω7 p q r s 7 π ß σ8 t u v 8 θ ü ú ù û τ9 w x y z 9 ξ  ψ0  + - 0 x * / \ [ ] = > < # §
46PRELIMINARYEntering TextUsing Symbol ModeYour phone provides an alternate way to enter symbol characters in a message. Press Mfrom any text entry screen and select the Symbol menu option.Symbol ChartUse this chart as a guide for entering characters in symbol mode.Do This To1Press a number key one timedisplay its symbol options at the bottom of the displaySee “Symbol Chart” on page 46.2Press *or#orPress the number key multiple timeshighlight the symbol you want3Press SELECT(+)enter the symbol at the flashing cursor location1 space . ? ! , @ _ &~ : ; " - ( ) ' ¿ ¡ %£ $ ¥   2  @ _ \3 / : ;4  " & '
47PRELIMINARYEntering TextUsing iTAP™ Software Predictive Text Entry MethodiTAP™ software provides a predictive text entry method that lets you enter a word using one keypress per letter.Press M from any text entry screen and select the iTAP menu option.Enter Words5  ( ) [ ] { }6  ¿ ¡ ~7  < > =8 $ £ ¥   9  # % *0  + - x * / = > < # §Do This To1Press a number key one timeenter the first letter of the wordThe letters associated with the key are shown at the bottom of the display.2Press number keys (one per letter)enter the rest of the wordAlternative words and letter combinations are shown at the bottom of the display. The word choices are updated with each keypress.
48PRELIMINARYEntering TextFor example, to spell the word “act,” press 2 2 8. The display shows:Enter Novel WordsYou may enter a word that the iTAP software does not recognize. If the word you want is not displayed:3Press *or#highlight the word you want4Press SELECT(+)enter the word at the flashing cursor locationA space is automatically inserted after the word.Do This To1Press DELETE(-) one or more timesdelete letters until you see a letter combination that matches the start of the wordDo This ToAct Cat Bat Abu }DELETE SELECTPress SELECT(+) toinsert the highlighted word.Press DELETE(-)to clear the last letter.Flashing cursorindicatesinsertionpoint.Press S toscroll and seeadditional wordchoices.
49PRELIMINARYEntering TextPunctuationCapitalizationThe first word of a sentence is automatically capitalized, with following words in lowercase.2Press *or#highlight the letter or letter combination3Press SELECT(+), then press *shift the text entry cursor to the left and “lock” the selected word portion4Continue to enter letters and highlight letter combinationsspell the wordPress To0 or 1enter punctuation or other characters as shown in the “Character Chart” on page 45Press ToS change the words to initial character capitalized, all uppercase characters, or all lowercase charactersDo This To
50PRELIMINARYEntering TextEnter NumbersDelete Letters and WordsPlace the cursor to the right of the text you want to delete, and then do the following:Do This To1Enter the first digit and then highlight itput the iTAP software in number entry mode2Press number keysadd digits to the number3Press SELECT(+)enter the number at the flashing cursor locationDo This ToPress DELETE(-) delete one letter at a timeHold DELETE(-) delete the entire message
51PRELIMINARYMenu Feature DescriptionsMenu Feature DescriptionsThis chapter describes all of your phone’s features in order of the menu map shown on pages 3–4.Main MenuRECENT CALLS  Received Calls  M>Recent Calls>Received CallsView a list of recently received calls. See page 64.Dialed Calls  M>Recent Calls>Dialed CallsView a list of recently dialed calls. See page 64.Notepad  M>Recent Calls>NotepadCall or store the last number entered on the keypad. See page 65.Call Times  M>Recent Calls>Call TimesView call timers that track time spent on your last call, dialed calls, received calls, all calls since reset, and all calls total. See page 66.PHONEBOOK  M>PhonebookStore names and numbers as entries in your phonebook, then call numbers by selecting them from the phonebook list. See page 68.
52PRELIMINARYMenu Feature DescriptionsDATEBOOK  M>DatebookUse the datebook calendar to schedule and review your appointments. See page 79.RADIO  M>Media Center >RadioListen to FM radio stations with the optional Motorola Original™ FM Stereo Radio Headset accessory. This menu feature is displayed only when the FM Stereo Radio Headset is plugged into the accessory connector port on your phone. See page 86.MESSAGES  M>MessagesAdjust message settings, view and manage the various types of messages your phone can receive and/or send:Create Message  Create new text messages. See page 103.Voicemail  Listen to your recorded voice messages. See page 89.Text MsgsRead and manage text messages. See page 91.Quick Notes  Select and send pre-written messages from the quick notes list. See page 106.Outbox View all outgoing text messages, delivered and undelivered.
53PRELIMINARYMenu Feature DescriptionsSHORTCUTS  M>ShortcutsCreate keypad or voice shortcuts to menu features. See page 119. VOICE NOTES  M>Voice NotesUse the voice key to record messagesand phone calls. See page 122.Note: Recording phone calls is subject to varying state and federal laws regarding privacy and recording of conversations.BROWSER  M>BrowserThe micro-browser delivers WAP (Wireless Application Protocol) pages from your service provider directly to your phone. See page 128.CALCULATOR  M>CalculatorUse your phone as a calculator or currency converter. See page 132.PICTURE VIEWER  M>Picture ViewerView and manage the pictures and animations stored on your phone. See page 77.GET IT NOW  M>Get It NowAccess games and applications on your phone. See page 135.Drafts  Store and edit text messages that you have written but not sent.
54PRELIMINARYMenu Feature DescriptionsSettings MenuRING STYLES  Style  M>Ring Styles >StyleSelect the ring style your phone uses to notify you of incoming calls, messages, or other events. See page 110.Style Detail  M>Ring Styles > StyleDetailChange details about the current ring style. Style represents the name of the ring style. See page 110.My Tones  M>Ring Styles >My TonesCreate custom alert tones for your phone. See page 112.PHONE STATUS  My Tel. Number  M>Settings >Phone Status >My Tel. NumberView, enter, and edit information about your name and phone number.Active Line  M>Settings >Phone Status >Active LineChange the active phone line to send and receive calls from either of the available numbers.Battery Meter  M>Settings >Phone Status >Battery MeterView a detailed battery charge meter.
55PRELIMINARYMenu Feature DescriptionsOther Information  M>Settings >Phone Status >Other InformationView your phone’s feature specifications(if available from the service provider).GETITNOW TOOLS  Get It Now System  M>Settings >Get It Now Tools >Get It Now SystemView the Get It Now software version in your phone, and view information about the phone memory available for Get It Now applications. See page 135.Network Access  M>Settings >Get It Now Tools >Network AccessApprove Internet connections for Get It Now applications. See page 135.DNS IP  M>Settings >Get It Now Tools >Network AccessSet up a valid domain name service (DNS) IP address so you can run Get It Now applications that require an active network connection. In many cases, your service provider has already entered this address for you. Contact your service provider to obtain the DNS IP address, if necessary.
56PRELIMINARYMenu Feature DescriptionsServer IP  M>Settings >Get It Now Tools >Network AccessSet up a valid Server IP address so you can run Get It Now applications that require an active network connection. In many cases, your service provider has already entered this address for you. Contact your service provider to obtain the DNS IP address, if necessary.IN-CALL SETUP  Set the features that are active during a call, such as the in-call timer and call answering options.In-Call Timer  M>Settings >In-Call Setup >In-Call TimerAdjust call timer Display and Beep settings. You can set your timer to beep at a selected interval during your calls. (60 seconds is the default.) You can also turn on or off a display timer during calls as follows:Answer Options  M>Settings >In-Call Setup >Answer OptionsTurn call answering options on or off:Time  Display the elapsed time for the current call.Off No in-call timer display.Multi-Key  Answer by pressing any key.Open to Answer  Answer by opening the flip.
57PRELIMINARYMenu Feature DescriptionsSECURITY  Phone Lock  M>Settings >Security >Phone LockLock and unlock your phone. See page 152.Lock Application  M>Settings >Security >Lock ApplicationLock and unlock specific phone applications (such as phonebook or datebook). When an application is locked, users must enter the unlock code to use the application.Restrict Calls  M>Settings >Security>Restrict CallsRestrict incoming and outgoing calls. See page 153.New Passwords  M>Settings >Security>New PasswordsChange your unlock code (originally set to 1234) or your security code (originally set to 000000). See page 150.LOCATION  M> Settings> LocationIf your phone has the automatic location information (ALI) feature, it can tell the phone network where you are physically located. See page 139.
58PRELIMINARYMenu Feature DescriptionsOTHER SETTINGS  Initial Setup  M>Settings >Other Settings >Initial SetupSet many basic phone options:Time and Date  Set the phone’s time and date.Auto PIN Dial Some networks require an authenticating PIN code to allow outgoing calls. Use this feature to automatically dial your PIN.Auto Redial  Use this option to turn on or turn off the automatic redial feature. When you turn on automatic redial, your phone automatically redials calls that fail due to busy network conditions. See page 30.Backlight  Set the amount of time that the display backlight remains on, or turn off the backlight to conserve battery power.Status Light  Turn the status light off (to conserve battery power) and on.
59PRELIMINARYMenu Feature DescriptionsZoom  Switch between three lines (Zoom Out) and two lines (Zoom In) of display text.TTY Setup  Set your phone to operate in one of three TTY modes, or return to normal Voice mode. See page 140.Scroll  Force the cursor to stop or wrap around when it reaches the top or bottom of a list in the display.Animation  Turn animation off (to conserve battery power) or on. Animation makes your phone’s menus move smoothly as you scroll up and down.Language  Set the language for phone menus.Contrast  Adjust the contrast setting for your display.
60PRELIMINARYMenu Feature DescriptionsDTMF  Your phone can send a number to the network as dual tone multi-frequency (DTMF) tones. DTMF tones are used to communicate with automated systems that require you to enter a number such as a code, password, or credit card number. Use this option to set DTMF tones to be long, short, or off.Master Reset  Reset all options back to their original factory settings except for the unlock code, security code, and lifetime timer.
61PRELIMINARYMenu Feature DescriptionsPersonalize  M>Settings >Other Settings >PersonalizeSet several personal phone options:Master Clear  Reset all options back to their original factory settings except for the unlock code, security code, and lifetime timer, and clear all user settings and entries.Note: This option erases all user-entered information stored in your phone’s memory, including phonebook and datebook entries. Once you erase the information, it cannot be recovered.Main MenuChange the order of the main menu. See page 137.Home KeysChange the functions of the soft keys and smart key in the idle display. See page 137.GreetingChange the text displayed when you turn on your phone.
62PRELIMINARYMenu Feature DescriptionsConnection  M> Settings>Other Settings >ConnectionConnect your phone to a computer or hand-held device to send and receive data and fax calls on the connected device. Specify the format for the next incoming call. You can select FaxInOnly, Data In Only, or Normal. See page 153.Network  M>Settings >Other Settings >NetworkView and adjust your phone’s network settings.Your service provider registers your phone to a network. You can view information about the current network, change how your phone searches for a network, and activate alerts that indicate when a call is dropped or network registration changes.BannerChange the text that appears in the idle display.Note: Banner text does not appear in your phone’s external display.Screen Saver  Change your phone’s screen saver image. See page 138.
63PRELIMINARYMenu Feature DescriptionsCar Settings  M>Settings >Other Settings >Car SettingsAdjust hands-free car kit settings.You can set your phone to route calls directly to the car kit when it detects a connection, and automatically answer calls after two rings. See page 142.Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.Headset  M>Settings>Other Settings>HeadsetSet your phone to automatically answer calls after two rings when connected to a headset. See page 142.
64PRELIMINARYRecent CallsRecent CallsViewing Received Calls or Dialed CallsYour phone keeps a list of the calls you recently received and dialed, even if the calls did not connect. The lists are sorted from newest to oldest entries. The oldest entries are deleted as new ones are added.Shortcut: Press N to go directly to the dialed calls list from the idle display.Find the FeatureM>Recent CallsPress To1S scroll to Received Calls or Dialed Calls2SELECT(+) select the list3S scroll to an entryNote: < means the call connected.4N orVIEW(+) orM call the entry’s numberview entry detailsopen the Last Calls Menu to perform other procedures as described in the following list
65PRELIMINARYRecent CallsThe Last Calls Menu can include the following options:Using the NotepadYour phone stores the most recent string of digits entered on the keypad in a temporary memory location called the notepad. This can be a phone number that you called, or a number that you entered but did not call. To retrieve the number stored in the notepad:Option DescriptionStore  Create a phonebook entry with the number in the No. field.DeleteDelete the entry.Delete AllDelete all entries in the list.Send Message  Open a new text message with the number in the To field.Add Digits  Add digits after the number.Attach Number  Attach a number from the phonebook or recent call lists, after the highlighted number.Send Tones  Send the number to the network as DTMF tones, for credit card or password calls.Find the FeatureM>Recent Calls >Notepad
66PRELIMINARYRecent CallsViewing and Resetting Call TimersNetwork connection time is the elapsed time from the moment you connect to your service provider's network to the moment you end the call by pressing O. This time includes busy signals and ringing.The amount of network connection time you track on your resettable timer may not equal the amount of time for which you are billed by your service provider. For billing information, please contact your service provider directly. You can view the following network connection times:Press ToN orM orSTORE(+)call the numberopen the Dialing Menu to attach a number or insert a special charactercreate a phonebook entry with the number in the No. field
67PRELIMINARYRecent CallsTo view a call timer:To reset the call timer:Timer DescriptionLast Call  Approximate time spent on last dialed or received call. You cannot reset this timer.Dialed Calls  Approximate time spent on dialed calls since the last time you reset this timer.Received Calls Approximate time spent on received calls since the last time you reset this timer.All Calls  Approximate time spent on dialed and received calls since the last time you reset this timer.Lifetime  Approximate time spent on all calls on this phone. You cannot reset this timer.Find the FeatureM>Recent Calls >Call TimesPress To1S scroll to the timer you want2SELECT(+) view the recorded timePress To1RESET(+) reset the time (if available)2YES(-) confirm the reset
Phonebook68PRELIMINARYPhonebookYou can store a list of names and phone numbers or email addresses in your phone’s electronic phonebook.To see the names in your phonebook, press M>Phonebook from the idle display. Scroll to a name and press VIEW(+) to view details of the phonebook entry as shown below.Viewing Entry DetailsNote: When you set a distinctive ringer alert for an entry, the Ringer ID setting appears below the speed dial number.$*Carlo Emrys2154337215Speed No.15BACK EDITM Entry’s phonenumber oremail addressType indicatoridentifiesnumber type:$WorkUHomeSMainhMobileZFaxpPager[EmailVoice Name indicatorindicates a recordedvoice name Entry’s NameEditentryPress Mto open thePhonebookMenuReturnto listEntry’s speeddial number
69PRELIMINARYPhonebookStoring a Phonebook EntryA phone number or email address is required for a phonebook entry. All other information is optional.Shortcut: Enter a phone number in the idle display, then press STORE(+) to create a phonebook entry with the number in the No. field. Go directly to step 3 to continue.Enter InformationFind the FeatureM>PhonebookM>NewPress To1S scroll to Phone Number or Email Address2SELECT(+) select the entry type3CHANGE(+)select Name4keypad keys enter a name for the entry5OK(+) store the name6CHANGE(+)select No. or Email7keypad keys enter the phone number or email addressTip: You can store a PIN code with the phone number. See page 71.8OK(+) store the phone number or email address
Phonebook70PRELIMINARY9CHANGE(+) select TypeNote: This option is not available for email entries.10S scroll to the number type11SELECT(+) select the number type12RECORD(+)orGo to step 13 if you do not want a voice namerecord a voice name for the entry, if desired13S scroll to Speed No.The next available speed dial number is assigned to a new phonebook entry.14CHANGE(+) select Speed No. if you want to change it15keypad keys enter a different speed dial number, if desired16OK(+) store the speed dial number17CHANGE(+) select Ringer ID if you want to assign a distinctive ringer alert for the phone numberYour phone uses the alert to notify you when you receive a call from this phone number. See page 111.Press To
71PRELIMINARYPhonebookComplete Phonebook EntryWhen you are finished entering information for a phonebook entry:Storing a PIN Code With the Phone NumberYou can store a PIN code with the phone number for calls that require additional digits (for example, to make a calling card call, or to retrieve voicemail or answering machine messages). Insert one or more of the following 18S scroll to the alert you want19SELECT(+) store the ringer ID alert20SELECT(+)select MORE if you want to create another entry under the same NameYou must use a different Type identifier for each number.Press ToDONE(-) store the entryPress To
Phonebook72PRELIMINARYcharacters in the dialing sequence to ensure that the number dials and connects properly:Note: You can store a maximum of 32 digits per number. Each character counts as one digit.Press ToM > Insert Pauseinsert a p (pause) characterYour phone dials the preceding digits, waits for the call to connect, then sends the remaining digit(s).M > Insert Waitinsert a w (wait) characterYour phone dials the preceding digits, waits for the call to connect, then prompts you for confirmation before it sends the remaining digit(s).M > Insert 'n'insert an n (number) characterYour phone prompts you for a number before dialing the call. The number you enter is inserted into the dialing sequence in place of the n character
73PRELIMINARYPhonebookRecording a Voice Name For a Phonebook EntryYou can record a voice name for a new or existing phonebook entry. A voice name lets you call the phonebook entry using voice dial (see page 74).Tip: Make your recording in a quiet location. Hold the phone about four inches (10 centimeters) from your mouth, and speak directly into the phone in a normal tone of voice.Find the FeatureM>PhonebookDo This To1Press S scroll to the entry2Press VIEW(+)  view entry details3Press EDIT(+) edit the entry4Press S scroll to Voice Name5Press RECORD(+) begin recording6Press and release the voice key and say the entry’s name (in two seconds)record the voice name7Press and release the voice key and repeat the nameconfirm the voice name8Press DONE(-) store the voice name
Phonebook74PRELIMINARYDialing a Phonebook EntryUse one of the following procedures to call a number (or send a text message to an email address) stored in your phonebook.Phonebook ListVoice DialTo speed dial a phonebook entry, see page 33. To call an entry with one-touch dial, see page 33.Find the FeatureM>PhonebookPress To1keypad key letter jump to entries that begin with that letter (optional)2S scroll to the entry3N make the callDo This ToPress and release the voice key and say the entry’s name (in two seconds).make the call
75PRELIMINARYPhonebookEditing a Phonebook EntryEdit the entry as described on pages 69-71.Deleting a Phonebook EntrySorting the Phonebook ListYou can sort your phonebook list by speed dial number (the standard), name, email address, or voice name.Note: The voice name sort is identical to the name sort, except that entries with voice name tags appear first.Find the FeatureM>PhonebookPress To1S scroll to the entry2VIEW(+) view entry details3EDIT(+)  edit the entryFind the FeatureM>PhonebookPress To1S scroll to the entry2M open the Phonebook Menu3 S scroll to Delete4SELECT(+)select Delete5YES(-) confirm the deletionFind the FeatureM>Phonebook
Phonebook76PRELIMINARYSynchronizing with TrueSync SoftwareYou can synchronize phonebook entries between your phone and computer or hand-held device with Starfish TrueSync® software, a Motorola accessory product. See the TrueSync user guide for more information.Note: TrueSync software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products.Press To1M open the Phonebook Menu2S scroll to Setup3SELECT(+) select Setup4S scroll to Sort by5CHANGE(+) select Sort by6S scroll to Name, Speed No., Voice Name, or Email7SELECT(+) select the sort order
77PRELIMINARYPicture ViewerPicture ViewerYour phone contains pictures and animations that you can insert into text messages, and use as screen saver images.The Picture Viewer menu can include the following options:Find the FeatureM>Picture ViewerPress To1S scroll to the picture2SELECT(+) view the picture3* or #orDETAILS(+)orM view the previous/next pictureview picture informationopen the Picture Viewer menu to perform other procedures as described in the following listOption DescriptionDetails  View picture information.
78PRELIMINARYPicture ViewerTo adjust your phone’s screen saver image, see page 138.Set as Screen Saver  Set the picture as your phone’s screen saver image.Rename  Rename the picture.Delete  Delete the picture.Option Description
79PRELIMINARYDatebookDatebookThe datebook is a calendar that lets you schedule and organize events such as appointments and meetings. You can set the datebook to send a reminder alarm for specific events.Note: You must set the correct time and date on your phone to use the datebook.To schedule or review datebook events:Week ViewThe datebook initially displays a calendar for the week. Lines or filled boxes indicate scheduled events.Find the FeatureM>DatebookEXIT VIEW{15 NOV-21 NOV }Go toselected dayExit thedatebook Untimedevent12 hourwindow One-hour eventDays of week(press *or#to select)Full day (12-hour)event scheduledSMTWTFSPress M to openthe Datebook MenuM
80PRELIMINARYDatebookDay ViewSelect a day and press VIEW(+) to see the day’s events.Event ViewSelect an event and press VIEW(+) to see event details.{THU 19-NOV }• Joe's B-day9:00 A Marie,... BACK VIEWDay of weekShow eventdetailsReturn toprevious screenUntimedeventEventReminderalarmDown scrollarrowPress M to openthe Datebook MenuM A THU 9:00amMarie, mtg aboutnew productBACK EDITDay and timeEdit eventReturn toprevious screenEvent detailsReminderalarm Down scrollarrowPress M to openthe Datebook MenuM
81PRELIMINARYDatebookAdding a Datebook EventA title is required for a datebook event. All other information is optional.Note: You must create an event to use the reminder alarm.Changing Event InformationFind the FeatureM>Datebook > dayM>NewPress To1CHANGE(+)select Title2keypad keys  enter a title for the event3OK(+) store the event title4S scroll to other fields and enter information as necessaryYou can set start time, duration, date, repeat interval, and reminder alarm.5DONE(-) store the eventFind the FeatureM>DatebookPress To1* or #scroll to the day2VIEW(+) display the day view3S scroll to the event4VIEW(+) display the event view
82PRELIMINARYDatebookCopying an Event5EDIT(+) edit the event6S scroll to the information you want to change7CHANGE(+) edit the information8keypad keys enter new information9DONE (-) store the informationFind the FeatureM>DatebookPress To1* or #scroll to the day2VIEW(+) display the day view3S scroll to the event4M open the Datebook Menu5S scroll to Copy6SELECT(+) copy the event7YES(-) confirm the copyYour phone assumes you want to change the date, and displays the Date field.8keypad keys enter date information9}(+)move to month, day, and year10DONE(-) save the copy of the event11S scroll to and edit event information, if necessaryPress To
83PRELIMINARYDatebookDeleting an EventAlarm ClockYour phone includes an alarm clock that you set and activate from the datebook week view or day view.Notes: •The alarm clock setting does not appear in the datebook day view, and is not synchronized with datebook settings•Your phone must be turned on to use the alarm12DONE(-) store the informationFind the FeatureM>DatebookPress To1* or #scroll to the day2VIEW(+) display the day view3S scroll to the event4M open the Datebook Menu5S scroll to Delete6SELECT(+)select Delete7YES(-) confirm the deletionPress To
84PRELIMINARYDatebookSet the AlarmTurn Off the AlarmWhen the alarm is activated, your phone rings or vibrates (depending on the alarm setting for the current ring style), and displays the time and alarm title.Find the FeatureM>DatebookM>Alarm ClockPress To1SELECT(+) edit the alarm settings2CHANGE(+)select Start3keypad keys  enter the alarm activation time4DONE(-) store the time5S scroll to other fields and enter information as necessaryYou can set date, title, repeat interval, and an alarm clock indicator.6CHANGE(+)select Ringer7S scroll to On to set the ringer or Off to turn off the ringer8DONE(-) store the alarm setting
85PRELIMINARYDatebookThe alarm is programmed to ring for 30 minutes, or until you perform one of the following operations.Press ToEXIT(-) or Oturn off the alarmDELAY(+) turn off the alarm for 8 minutesThe alarm is reactivated at the end of 8 minutes.
86PRELIMINARYRadioRadioYou can use your phone to listen to FM radio stations when the optional Motorola Original™ FM Stereo Radio Headset accessory is plugged into the phone’s accessory connector port.Turning the Radio On and OffAlternatively, you can use the following procedure:Note: The Radio menu feature and soft key options appear only when the FM Stereo Radio Headset is plugged into the accessory connector port.Press ToRadio(+) turn the radio on and offFind the FeatureM>Radio >OnorOffPress To1M open the menu2S scroll to Radio3On(+) or Off(+)turn the radio on or off
87PRELIMINARYRadioTuning a StationStoring a PresetSelecting a PresetSending and Receiving Calls With the Radio OnYour phone rings or vibrates as usual to notify you of an incoming call, message, or other event.Do This ToPress S orPress and hold S scroll to the next frequencyscroll to the next available stereo stationDo This ToPress and hold a number key (1to9)assign its preset number to the tuned stationPress Toa number key (1to9)tune the station stored at the preset location
88PRELIMINARYRadioTo end the call and resume the FM broadcast:Turn the radio off before dialing outgoing calls from the phone keypad. You do not have to turn off the radio to dial emergency numbers, or numbers selected from your phonebook or recent call lists.Tip: To dial a recently called number, press N or the button on the FM Stereo Radio Headset microphone to go to the dialed calls list. For more information, see page 64.Do This ToPress  IGNORE(-)  ignore the callPress  ANSWER(+) orPress the button on the FM Stereo Radio Headset microphoneanswer the callNote: You can use the FM Stereo Radio Headset microphone to converse with the other party during a callDo This ToPress  OorPress and hold the button on the FM Stereo Radio Headset microphoneend the call
89PRELIMINARYMessages—VoicemailMessages—VoicemailYou can listen to your voicemail messages by calling your network voicemail phone number. Voicemail messages are stored on the network—not on your phone.Storing Your Voicemail NumberStoring your voicemail number on your phone makes it easy for you to listen to new voicemail messages. In many cases, your service provider has already done this for you.Your service provider additionally may store your voicemail number as phonebook entry number 1, so you can use one-touch dial to listen to your voicemail messages. If necessary, see page 69 to store your voicemail number for one-touch dial access.Find the FeatureM>MessagesM>VoiceMail SetupPress To1keypad keys enter your voicemail numberTip: You can store your PIN code with the voicemail number. See page 71.2OK(+) store the number
90PRELIMINARYMessages—VoicemailReceiving a Voicemail MessageWhen you receive a voicemail message, your phone displays the & (voice message waiting) indicator and a New VoiceMail notification.If reminders are turned on, your phone sends a reminder at intervals until you close the new message notification, listen to the message, or turn off your phone.Listening to a Voicemail MessageThe phone calls your voicemail number. If no voicemail number is stored, your phone prompts you to store one.Shortcut: If your voicemail number is also stored as phonebook entry number 1, you can press and hold 1 to listen to your voicemail message(s).Turning Off the Voice Message Waiting IndicatorTo clear the & (voice message waiting) indicator:Press ToCALL(+) listen to the messageFind the FeatureM>Messages >VoiceMailFind the FeatureM>MessagesM>Clear Count
91PRELIMINARYMessages—TextMessages—TextText messages are brief messages that you can send and receive.Quick notes are pre-written text messages that you can incorporate into a message and send quickly.Your text message inbox must be set up before you can send and receive messages. The number of messages the inbox can hold depends on the length of the messages, and the number of other messages and drafts stored on your phone.Setting Up the Text Message InboxNote: In many cases, your service provider has already set up the text message inbox for you.Find the FeatureM>MessagesM>Inbox SetupPress To1CHANGE(+) change the Cleanup setting2S scroll to the number of days you want to keep messages in the inbox, or the number of messages you want to keep3SELECT(+) select the cleanup setting4DONE(-) save the inbox settings
92PRELIMINARYMessages—TextReceiving a Text MessageNote: Your text message inbox must be set up before you can receive text messages. See page 91.When you receive a text message, your phone displays the X (message waiting) indicator and a New Inbox Message notification, and gives an alert.If you receive a downloaded picture, your phone displays 1 New Picture Received, and you can store or delete the picure.If reminders are turned on, your phone sends a reminder at regular intervals until you close the new message notification, read the message, or turn off your phone.When your phone displays Memory is Full!, you must delete some existing messages to receive new messages.Reading, Locking, or Deleting a Text MessageMessages in the text message inbox are sorted from newest to oldest. The oldest messages are deleted automatically as specified by the inbox cleanup setting (see page 91). If you want to save a message, you should lock it to prevent it from being deleted during cleanup.Press ToREAD(+) open the messageFind the FeatureM>Messages >Inbox
93PRELIMINARYMessages—TextThe Inbox Menu can include the following options:Press To1S scroll to the messageThe following indicators show message status:Y= unreadñ=unread (with attachment)d= unread and urgentï= unread and urgent(with attachment)n= readî= read (with attachment)f= read and lockedó=read and locked(with attachment)2READ(+) open the message3BACK(-)orDELETE(+)orM close the messagedelete the messageopen the Inbox Menu to perform other procedures as described in the following listOption DescriptionCreate Message  Open a new text message.
94PRELIMINARYMessages—TextStoring Pictures, Animations, and SoundsText messages that you receive can contain pictures, animations, and sounds. Pictures and animations are displayed as you read the message. A sound begins Call Back  Call the number in the message header or embedded in the message.Go To  Launch the micro-browser and go to a Web address (URL) embedded in the message.Reply  Open a new text message, with the sender’s Reply To number or email address in the To field.Forward  Open a copy of the text message, with an empty To field.Store  Display a list of items that can be stored, including the sender’s number or email address, and a selected image or sound file.Play  Play a sound file in the message.Lock/Unlock  Lock or unlock the message.Delete Delete the message.Delete All Delete all inbox messages.Inbox Setup  Open the text message inbox setup menu.Option Description
95PRELIMINARYMessages—Textplaying when you select the ê (sound file) indicator.You can store these embedded object files on your phone, and use them as screen saver images and alert tones.Store a Picture or Animation FileFor more information about using pictures and animations, see pages 77, and 138.Press To1S highlight the picture or animation in the message2M open the Text Msg Menu3S scroll to Store4SELECT(+) display a list of items you can store5S scroll to File Attachment6SELECT(+) display the file name1STORE(+) view storage options2S scroll to Store Only,  or Set as Screen Saver3SELECT(+) store the file and, optionally, set it as your screen saver image
96PRELIMINARYMessages—TextStore a Sound FileYou can store a sound file, and set it as an event alert.Press To1S highlight the ê (sound file) indicator in the message2M open the Text Msg Menu3S scroll to Store4SELECT(+) display a list of items you can store5S scroll to File Attachment6SELECT(+) display the file name7STORE(+) view storage options8S scroll to Store Only or Set As Ring Tone9SELECT(+) select the optionIf you select Store Only, the procedure is complete.If you select SetAsRing Tone, your phone displays Set As Which?, and lists the events for which you can set an alert.10S scroll to the event11SELECT(+) store the sound and set it as the event alert
97PRELIMINARYMessages—TextFor more information about using sound files, see pages 110 and 112.Reading Browser AlertsYour network’s Web server can send you browser alerts that you can read in your micro-browser.When you receive a browser alert message, your phone displays the X (message waiting) indicator and a New Browser Message notification, and gives an alert.To view your browser alert messages at any time:Press ToGO TO(+)orEXIT(-)launch the micro-browser and view the messageclose the new message notificationFind the FeatureM>More >Messages >Browser AlertsPress To1S scroll to a message2SELECT(+) open the message
98PRELIMINARYMessages—TextReading Information Service MessagesInformation service messages are broadcast messages that you can receive, such as stock updates or news headlines.Your information services message inbox must be set up before you can receive information services messages. The number of messages the inbox can hold depends on the length of the messages, and the number of other messages and drafts stored on your phone.Set Up the Information Services Message InboxNote: In many cases, your service provider has already set up the information services message inbox for you.Find the FeatureM>More >MessagesM>Info Srvc SetupPress To1CHANGE(+) change the Service setting2S scroll to the Yes or No to turn cell broadcasts on or offNote: Your phone may provide an additional Browser Services option on this menu. See page 131.3SELECT(+) select the service setting
99PRELIMINARYMessages—Text4SELECT(+) select Active Channels to set the subscription channels5S scroll to an active channel that you want to disable, or scroll to [New Channel] to add a new channel6BACK(-)  return to the cell broadcast menu when you are finished setting subscription channels7CHANGE(+) change the Quick View channel8keypad keys  enter the quick view channel number9OK(+) store the quick view channel number10CHANGE(+) change the Save Q.View setting11S scroll to Yes or No to set whether you want to save single-line quick view messages in the inbox12SELECT(+) store the save setting13CHANGE(+) change the Cleanup setting14S scroll to the number of days you want to keep messages in the inbox, or the number of messages you want to keepPress To
100PRELIMINARYMessages—TextReceive an Information Services MessageNote: Your information services message inbox must be set up before you can receive information services messages. See page 98.When you receive a lengthy information services message, your phone displays the X (message waiting) indicator and a New Message notification, and gives an alert.If the new message is a short quick view message, it appears directly in your display. See page 102.If reminders are turned on, your phone sends a reminder at regular intervals until you close the new message notification, read the message, or turn off your phone.When your phone displays Memory is Full!, you must delete some existing messages from your inbox, outbox, or drafts folder to receive new messages.15DONE(-)  save the information services message inbox settingsPress ToREAD(+) open the message (or your information services message inbox if there are multiple messages)Press To
101PRELIMINARYMessages—TextRead, Lock, or Delete an Information Services MessageMessages in the information services message inbox are sorted from newest to oldest. The oldest messages are deleted automatically as specified by the inbox cleanup setting (see page 98). If you want to save a message, you should lock it to prevent it from being deleted during cleanupPress To1S scroll to the messageThe following indicators show message status:Y= unreadn=readf= read and locked2READ(+) open the message3SAVE(-)orDELETE(+)orM close the messagedelete the messageopen the Info Srvc Menu to perform other procedures as described in the following list
102PRELIMINARYMessages—TextThe Info Srvc Menu can include the following options:Read and Save a Quick View MessageQuick view messages are short information service messages that appear directly in your phone’s idle display. Option DescriptionCall Back  Call the number in the message header or embedded in the message.Go To  Launch the micro-browser and go to a Web address (URL) embedded in the message.Forward  Open a copy of the message, with an empty To field.Lock/Unlock  Lock or unlock the message.Store Number  Open a new phonebook entry with the message’s embedded number in the No. field.Delete Delete the messageDelete All Delete all inbox messagesStore Address  Open a new phonebook entry with the message’s embedded email address in the Email field.Setup Open the information services message inbox setup menu
103PRELIMINARYMessages—TextYour phone alerts you when you receive a new quick view message.If the message is more than two lines, you can press Save(-) to save it in your information services inbox. To automatically save quick view messages, see page 98.Note: Broadcast or browser services send quick view messages on quick view channels. To set up a quick view channel, see page 98.Sending a Text MessageYou can send a text message to one or more recipients. You can manually enter each recipient’s phone number or email address, or select numbers/addresses from the phonebook or recent call lists.Note: When you manually enter numbers and/or email addresses, you must insert a space between each entry. Press 1 one time, wait for the space to appear, then enter the next number or email address.Do This ToRead the message and press Oread and delete the quick view messageFind the FeatureM>Messages >Create MessagePress To1CHANGE(+) select To
104PRELIMINARYMessages—Text2keypad keysorBROWSE(+)aS bSELECT(+)cS dADD(+)eDONE(-)enter one or more phone numbers and/or email addressesTip: Press 1 to insert a space between eachnumber/address that you enter manually.select numbers/addresses from the phonebook or recent call lists as follows:highlight Phonebook, Received Calls, or Dialed Callsselect the listhighlight a number/addressadd the number/address to the list of message recipientsreturn to the message editor when you are finished3OK(+) store the numbers/addresses4CHANGE(+) select MsgPress To
105PRELIMINARYMessages—Text5keypad keysorBROWSE(+)enter the messageNote: Message length is limited. As you near the limit, a display counter shows how many characters are left.select and insert a quick note message (see page 106)6keypad keysorBROWSE(+)enter the messageNote: Message length is limited. A display counter cycles between the number of pages you have written (number preceded by a *), and the number of characters left on the current page. Network charges are based on the number of pages sent.select and insert a quick note message (see page 106)7OK(+)store the message8CHANGE(+) select Priority9S scroll to the priority you want10SELECT(+) set the priority11CHANGE(+) select CallPress To
106PRELIMINARYMessages—TextSending a Quick Note Text MessageQuick notes are pre-written text messages that you can incorporate into a message and send quickly (for example, Meet me at ...). You can also create new quick notes.12keypad keys enter a number for the recipient to call back13OK(+) store the number14DONE(-) finish the messageYour phone displays the total pages in the message.15YES(-)orNO(+)send the messagecancel the message or save it in the drafts folderFind the FeatureM>Messages >Quick NotesPress To1S scroll to the quick note2READ(+)orM read the quick noteopen the Quick Note Menu to perform other procedures as described in the following listPress To
107PRELIMINARYMessages—TextThe Quick Note Menu can include the following options:Inserting Pictures, Animations, and SoundsYou can insert pictures, animations, and sounds into a text message as you compose it.Insert a Picture or Sound FileEnter your message as usual. When you come to a spot where you want to insert a picture or sound file:Option DescriptionNew  Create a new quick note.Edit  Edit the quick note.Delete  Delete the quick note.Send  Open a new message with the quick note in the Msg field.Press To1M open the Message Menu2S scroll to Insert3SELECT(+) display a list of items you can insert4S scroll to Picture, Animation, or Sound5SELECT(+) select the file type6S highlight the file you want
108PRELIMINARYMessages—TextNotes: Inserted animations or graphics appear in the message, while sound files are represented by a ê.•Your phone may allow only predefined images and sounds in a message. These files are identified by a ë (predefined object) indicator.•You can insert up to fifteen pictures in a messageView or Delete an Inserted File7VIEW(+) or PLAY(+)preview the file8INSERT(+) insert the filePress To1S place the cursor to the right of the file type indicator2S highlight the file type indicator3SELECT(+)orDELETE(-)view or play the inserted filedelete the inserted filePress To
109PRELIMINARYMessages—TextViewing the Status of Sent Text MessagesMessages that you send are stored in the outbox.Messages in the outbox are sorted from newest to oldest. The following indicators show message status:Find the FeatureM>Messages >Outboxá = sending in progressY = sentm = sending failed
110PRELIMINARYRing StylesRing StylesYour phone rings or vibrates to notify you of an incoming call or other event. This ring or vibration is called an alert. You can select one of five different ring styles:The ring style indicator in the display shows the current ring style (see page 23).Each ring style contains settings for specific event alertsringer ID, and ringer and keypad volume.Selecting a Ring StyleCustomizing a Ring StyleChange Style SettingsYou can change the alerts that notify you of the following events: incoming calls, text messages, voicemail w= loud ringx= soft ringy=vibrateu= vibrate and ringt= silentFind the FeatureM>Settings >Ring Styles >StylePress To1S scroll to the ring style2SELECT(+) select the ring style
111PRELIMINARYRing Stylesmessages, data calls, fax calls, alarms, and reminders. Any changes you make are saved to the current ring style.Note: Style represents the current ring style.Activate and Deactivate Ringer IDsWhen ringer IDs are turned on, your phone uses distinctive ringer alerts to notify you of incoming calls or messages from specific entries stored in your phonebook. To assign a ringer ID to a phonebook entry, see page 69.Note: Style represents the current ring style.Find the FeatureM>Settings >Ring Styles >StyleDetailPress To1S scroll to the event2CHANGE(+) select the event3S scroll to the alert you want4SELECT(+) select the alertFind the FeatureM>Settings >Ring Styles >StyleDetail
112PRELIMINARYRing StylesSet Ringer or Keypad VolumeNote: Style represents the current ring style.Creating Alert TonesYou can create and store custom alert tones on your phone. The tones appear in the list of available alerts.Create a ToneFind the FeatureM>Settings >Ring Styles >StyleDetailPress To1S scroll to Ring Volume or Key Volume2* or #  scroll to the desired volume3OK(+) confirm the new volumeFind the FeatureM>Settings >Ring Styles >My TonesPress To1S scroll to [New Tone]2SELECT(+) select [New Tone]3CHANGE(+) select Notes4keypad keys enter notes (see page 113)5OK(+) store the notes6CHANGE(+) select Name
113PRELIMINARYRing StylesEnter NotesUse the keypad keys to enter each note. Press a key multiple times to cycle through its notes or options (pitch, octave, or length). The default setting for a new tone is a quarter note in octave two.7keypad keys enter a name for the tone8OK(+) store the name9DONE(-) store the toneKey Display Description1 1 set octave one2 set octave two3 set octave three2 A note AB note BC note C3 D note DE note EF note F4 G note GR rest7 # sharpb flatPress To
114PRELIMINARYRing StylesEnter a note as follows:0 q  quarter note or resth  half note or restw whole note or restTask ActionChange the octaveSet the new octave (1, 2, or 3) before selecting the note. The octave applies to all following notes until you change it again.Select the note (required)Press a keypad key.Change a note to a sharp or flatEnter a sharp or flat (# or b) after selecting the note.Some sharps and flats are played as standard notes. For example, B# is the same as C. Press to scroll to valid notes when entering a new note.Change a note’s lengthSet the new length (q, h, or w) after selecting the note. The length applies to all following notes until you change it again.Key Display Description
115PRELIMINARYRing StylesExamplePress the following keys to play this sequence of notes and rests in octave three: C (quarter note), E flat (quarter note), half rest, and G (whole note):Add a rest Enter one or more rests (R characters) as needed in the tone sequence. Set the length of the rest by entering a q, h, or w character after the rest, just as you would for a note.Listen to a new tone as you compose itPress M to enter the Compose Menu, and select Play All to play the notes you have entered.Press To Display11 1 1set octave three3 22 2 2enter a quarter note CC 33 3 7 7enter a quarter note E flatEb 44 4 0 0enter a half restRh Task Action
116PRELIMINARYRing StylesPlay a ToneEdit a ToneYou cannot edit the predefined alert tones included with your phone. To edit a custom alert tone:54 0 0 0enter a whole note GGw Find the FeatureM>Settings >Ring Styles >My TonesPress To1S scroll to the tone2M open the My Tones Menu3S scroll to Play4SELECT(+) select Play5PLAY(+)orCANCEL(-)play the tone againreturn to my tones listFind the FeatureM>Settings >Ring Styles >My TonesPress To1S scroll to the tone2EDIT(+) open the tone detailsPress To Display
117PRELIMINARYRing StylesDelete a ToneYou cannot delete the predefined alert tones included with your phone. To delete a custom alert tone:Send and Receive TonesYou can send and receive ring tones attached to text messages. To insert a tone in a text message, see page 107. To download a tone from a text message, see page 94.3S scroll to the item you want to edit (Name or Notes)4CHANGE(+) select the item5keypad keys enter new text or notes6OK(+) store the new text or notes7DONE(-) save your changesFind the FeatureM>Settings >Ring Styles >My TonesPress To1S scroll to the tone2M open the My Tones Menu3S scroll to Delete4SELECT(+)select Delete5YES(-) confirm the deletionPress To
118PRELIMINARYRing StylesSetting RemindersA reminder is an alert that rings or vibrates at regular intervals to notify you about a voicemail or text message that you have received.Note: Style represents the current ring style.Find the FeatureM>Settings >Ring Styles >StyleDetail >RemindersPress To1S scroll to Beep or Vibrate to set the reminder alert type, or Off to turn off all reminders2SELECT(+) select the reminder alert
119PRELIMINARYShortcutsShortcutsYour phone includes several standard shortcuts. You can create additional shortcuts to frequently used menu items.Standard ShortcutsThe following shortcuts are pre-programmed in your phone. You cannot edit or delete these shortcuts.Creating a ShortcutYou can create a keypad shortcut plus an optional voice shortcut to a menu item. A voice shortcut takes you directly to the menu item when you say the shortcut name.Tip: Make your recording in a quiet location. Hold the phone about four inches (10 centimeters) from your Do This ToPress M, then press and hold M (within two seconds)zoom in/out on your phone displayPress M#see your phone numberPress Ngo to the dialed calls listPress Oexit the menu system
120PRELIMINARYShortcutsmouth, and speak directly into the phone in a normal tone of voice.Do This To1Press Menter the menu system2Press Sscroll to the menu item3Press and hold Mopen the shortcut editor4Press YES(-) view shortcut options5Press CHANGE(+)orPress DONE(-)orPress Schange the keypad shortcut numberselect the default keypad shortcut numberscroll to Voice to assign a voice shortcut6Press RECORD(+) begin recording7Press and release the voice key and say the shortcut’s name (in two seconds)record the shortcut name8Press and release the voice key and repeat the nameconfirm the shortcut name9Press DONE(-) store the shortcut name
121PRELIMINARYShortcutsUsing ShortcutsUse a Keypad ShortcutSelect a Shortcut From the ListUse a Voice ShortcutPress To1M  open the main menu2a number key go to the menu item with that shortcut numberFind the FeatureM>Shortcuts >shortcut nameDo This To1Press Mopen the menu2Press and release the voice key and say the shortcut’s name (in two seconds)go to the menu item with that shortcut name
122PRELIMINARYVoice NotesVoice NotesYou can use the voice note feature to record personal messages and phone calls on your phone.Recording a Voice NoteUse this procedure to record a voice note from the idle display, or to record a phone call in progress. Your phone plays an alert tone to notify the other party that the call is being recorded.Note: Recording phone calls is subject to varying state and federal laws regarding privacy and recording of conversations.Tip: Make your recording in a quiet location. Hold the phone about four inches (10 centimeters) from your mouth, and speak directly into the phone in a normal tone of voice.Do This Result1Press and hold the voice key for the duration of the recording.The phone sounds an alert tone and begins recording.2Speak your voice note. The phone records the voice note.3Release the voice key to stop recording.The phone displays the voice note number and total recording time.
123PRELIMINARYVoice NotesViewing the Voice Notes ListFind the FeatureM>Voice NotesVoice Notes2)2:20pm 6/1/00 1)4:05am 4/1/00EXIT PLAYf Press M to open theVoice Notes MenuPlay thehighlightedvoice noteReturn toprevious screenTime/daterecordedDown scrollarrowLockedvoice noteM
124PRELIMINARYVoice NotesPlaying a Voice NoteWhen you connect an optional Motorola Original™ headset or FM Stereo Radio Headset accessory to your phone, playback is automatically routed to the headset.Tip: You can play a voice note while taking a call. It will not be transmitted to the other party.Playback ScreenThe playback screen is displayed as the voice note plays.Find the FeatureM>Voice NotesPress To1S scroll to the voice note2PLAY(+) play the voice noteErasevoice noteReturn toprevious screenVoice notenumberPress # tofast forwardPress *to rewindVoice Note 3{}SAVE DELETEIndicates% playedPress M to open theVoice Notes MenuM
125PRELIMINARYVoice NotesVoice Note ControlsStopplayback andreturn to voicenotes list.Stopplayback andgo to VoiceNotes Menu.Stopplayback andscroll up/downto next voicenote.Rewind threeseconds,resumeplaying.Press and holdto rewind to thebeginning.When playback iscomplete, press torestart.Fast forwardthreeseconds,resumeplaying.Press anynumber toalternatelystop andstartplayback.If voice note islocked, stopplayback andunlock voicenote.Press andhold to fastforward toend.If voice note isunlocked, stopplayback anddisplay Delete Voice Note?Raise or lowerplaybackvolume ofvoice note.
126PRELIMINARYVoice NotesLocking and Unlocking a Voice NoteLock a voice note to prevent it from being deleted. You must unlock a voice note to delete it.To lock or unlock a voice note during playback:Playback stops when you lock or unlock a voice note. Press any number key to resume playback.Find the FeatureM>Voice NotesPress To1S scroll to the voice note2M open the Voice Notes Menu3S scroll to Lock or Unlock4SELECT(+) lock or unlock the voice notePress To1M open the Voice Notes Menu2S scroll to Lock or Unlock3SELECT(+) lock or unlock the voice note
127PRELIMINARYVoice NotesDeleting a Voice NoteNotes: •You cannot delete a locked voice note.•You cannot recover a deleted voice note.Find the FeatureM>Voice NotesPress To1S scroll to the voice note2M open the Voice Notes Menu3S scroll to Delete or Delete All4SELECT(+) select the highlighted option5YES(-)orNO(+)confirm the deletioncancel deletion
128PRELIMINARYMicro-BrowserMicro-BrowserThe micro-browser lets you access Web pages and Web-based applications on your phone. Contact your service provider to set up access, if necessary.Starting a Micro-Browser SessionShortcut: If you open a text message with a Web address (URL) embedded in it, you can press M>Go To to launch the micro-browser and go directly to the URL.If you are unable to establish a network connection with the micro-browser, contact your service provider.Find the FeatureM>BrowserFind the FeatureM>BrowserPress To1S scroll to a bookmark, service, or application2SELECT(+) select the item
129PRELIMINARYMicro-BrowserInteracting With Web PagesDownloading Pictures, Animations, and SoundsYou can download a picture, animation, or sound from a Web page by selecting its link. A picture or animation is displayed when downloading is complete. A sound begins to play when downloading is complete.You can store these object files on your phone, and use them as screen saver images and alert tones.Press ToS scroll through text, or highlight a selectable itemSELECT(+) select the highlighted itemN call the highlighted phone number from the micro-browserkeypad keys, followed by OK(+)enter informationTip: Press DELETE(*) to delete one letter at a time if you make a mistake.BACK(*) go back to the previous pageM open the Browser Menu
130PRELIMINARYMicro-BrowserStore a Picture or Animation FileFor more information about using pictures and animations, see pages 77 and 138.Store a Sound FileYou can store a sound file, and set it as an event alert.Press To1STORE(+) view storage options2S scroll to Store Only,  or Set as Screen Saver3SELECT(+) store the file and, optionally, set it as your screen saver imagePress To1STORE(+) view storage options2S scroll to Store Only or Set As Ring Tone3SELECT(+) select the optionIf you select Store Only, the procedure is complete.If you select Set As Ring Tone, your phone displays Set As Which?, and lists the events for which you can set an alert.4S scroll to the event
131PRELIMINARYMicro-BrowserFor more information about using sound files, see pages 110 and 112.Running the Micro-Browser in the BackgroundSome phones are set up to run a micro-browser session in the background when the phone registers with a network. This allows your phone to display information services messages delivered to your phone by your service provider (such as stock updates, news updates, or sports scores). These types of services typically are available through subscription from your service provider.Turn a Background Micro-Browser Session On or Off5SELECT(+) store the sound and set it as the event alertFind the FeatureM>More >MessagesM>Info Srvc Setup >Browser ServicesPress To1S toggle the background micro-browser setting to On or Off2SELECT(+) select the new settingPress To
132PRELIMINARYCalculatorCalculatorYou can use your phone as a calculator and currency converter.Calculating NumbersFind the FeatureM>CalculatorPress To1number keys enter a number2* or #highlight a calculator function3SELECT(+) perform the functionCalculator+0EXIT SELECTSelectedfunctionappearsherePerform thehighlightedfunctionPress M to openthe Calculator MenuExit thecalculatorEnterednumberPress * or# to scrollto otherfunctionsPress * or# to highlighta function. ÷C = +-x} M
133PRELIMINARYCalculatorThe calculator can perform the following functions:Function Description. Insert a decimal pointC  Clear the calculationCE  Clear entry (replaces C when you enter subsequent values in a calculation)=  Calculate the result+ Add- Subtractx Multiply÷ Divide%  Divide the displayed value by 100±  Change the entry’s sign(positive/negative)$  Calculate the exchange rateMS Store the value in memory (overwrites current stored value)MC Clear the value stored in memoryMR Replace the displayed value with the value stored in memory
134PRELIMINARYCalculatorConverting CurrencyThe currency converter works just like the calculator, but uses the $ (currency) function:Find the FeatureM>CalculatorM>Exchange RatePress To1number keys enter the exchange rate2OK(+) store the exchange rate3number keys enter the amount to convert (amount to multiply by the exchange rate)4* or #highlight the $ function5SELECT(+) perform the conversion
135PRELIMINARYGet It NowA7AGet It NowYour phone may contain additional applications that add features and functionality to your phone by downloading them. Downloaded games and applications are stored in the GetItNow folder on your phone.Launching an ApplicationEditing Network Connection SettingsYour phone must be set up with a valid domain name service (DNS) IP address and a Server IP address before you can run applications that require an active network connection. In many cases, your service provider has already entered these addresses for you. Contact your service provider to obtain the addresses, if necessary.Find the FeatureM>Get It NowPress To1S scroll to the application2SELECT(+)  launch the application, or open the list of applications in a suite3S scroll to the application you want, if necessary4SELECT(+) launch the application
136PRELIMINARYGet It NowA7AUsing Control KeysYour phone’s keys perform the following functions in a application.Analyzing or Deleting an ApplicationYou can choose to analyze or delete the application.Key FunctionS Move up, down, left, or right in a game.O End the application.Find the FeatureM>Get It Now  >Options > application
137PRELIMINARYAdjusting Your SettingsAdjusting Your SettingsReordering Menu ItemsYou can reorder the items in your phone’s main menu.Customizing a Soft Key FunctionYou can relabel the soft keys (- and +) and the smart key to access different menu items from the idle display.Find the FeatureM>Settings >Other Settings >Personalize >Main MenuPress To1S scroll to a menu item2GRAB(+) grab the menu item3S move the item to a new location in the menu4INSERT(+) insert the menu itemFind the FeatureM>Settings >Other Settings >Personalize >Keys
138PRELIMINARYAdjusting Your SettingsScreen SaverYou can set a picture or an animation as a screen saver image in your phone’s idle display. The image is displayed when no activity is detected for a specified time period.The screen saver image is shrunk to fill the display, if necessary. An animation repeats for one minute, then the first frame of the animation is displayed.Press To1S scroll to Left, Right, or Smart2CHANGE(+) select the key3S scroll to the new key function4CHANGE(+) confirm the new functionFind the FeatureM>Settings >Other Settings >Personalize >Screen SaverPress To1S scroll to Picture2CHANGE(+) open the picture viewer3Sscroll to a picture/animationScroll to (None) to turn off the screen saver image.4SELECT(+) select the image5S scroll to Delay6CHANGE(+) set the delay interval
139PRELIMINARYAdjusting Your SettingsHiding or Showing Location InformationYour phone can use the automatic location information (ALI) feature to tell the network where you are physically located.When ALI is set to Location On, your phone displays the N (ALI on) indicator.Services may use your known location to provide useful information (for example, driving directions, or the location of the nearest bank). Your phone prompts you when the network or a service asks for your location. You can refuse at this point.When ALI is set to 911 Only, your phone displays the M (ALI off) indicator, and the phone does not send location information unless you call the emergency phone number (such as 911).7S scroll to the inactivity interval that triggers the screen saver8SELECT(+) confirm the delay setting9DONE(-) save screen saver settingsPress To1S scroll to Location On or 911 Only2SELECT(+) select the settingPress To
140PRELIMINARYAdjusting Your SettingsTTY OperationYou can use an optional TTY device with your phone to send and receive calls. You must plug the TTY device into the phone’s headset jack and set the phone to operate in one of three TTY modes.Notes: •Use a TSB-121 compliant cable (provided by the TTY manufacturer) to connect the TTY device to your phone.•Set the phone volume to level 4 (middle setting) for proper operation. If you experience a high number of incorrect characters, adjust the volume as necessary to minimize the error rate.•For optimal performance, your phone should be at least 12 inches (30 centimeters) away from the TTY device. Placing the phone too close to the TTY device may cause high error rates.Set TTY ModeWhen you set your phone to a TTY mode, it operates in that mode whenever the TTY device is connected.Find the FeatureM>Settings >Other Settings >Initial Setup >TTY SetupPress To1S scroll to TTY Setup2CHANGE(+) change the TTY mode
141PRELIMINARYAdjusting Your SettingsThe TTY Setup menu can include the following options:When your phone is in a TTY mode, the international TTY symbol and the mode setting are shown in the display during an active digital TTY call. You can press TTYMODE(-) to change the mode setting.Switch to TTY Mode During a Voice Call3S scroll to the TTY mode4SELECT(+) select the TTY modeOption DescriptionTTY  Transmit and receive TTY charactersVCO  Receive TTY characters but transmit by speaking into the microphoneHCO  Transmit TTY characters but receive by listening to the earpieceVoice  Return to normal voice modePress To1M open the Call menu2S scroll to TTY Setup3SELECT(+) display the TTY Setup menu4S scroll to the TTY mode5SELECT(+) select the TTY modePress Toù
142PRELIMINARYAdjusting Your SettingsReturn to Voice ModeTo return to normal voice mode, select Voice from the TTY Setup menu as described on page 140.Hands-Free UseYou can purchase an optional Motorola Original™ hands-free car kit or headset for your phone. These accessories provide alternative ways for you to use your phone without using your hands.Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.Automatic AnswerYou can set your phone to automatically answer calls after two rings (four seconds) when connected to a car kit or headset.Find the FeatureM>Settings >Other Settings Press To1S scroll to Car Settings or Headset2SELECT(+) select the feature3S scroll to Auto Answer4CHANGE(+) select Auto Answer5S scroll to On or Off6SELECT(+) confirm the setting
143PRELIMINARYAdjusting Your SettingsAutomatic Hands-FreeYou can set your phone to automatically route calls to a car kit when it detects a connection.Power-Off DelayWhen your phone is connected to a car kit, you can set it to stay on for a period of time after you switch off the ignition. This prevents the phone from draining your vehicle battery, but leaves the phone on long enough that you do not have to re-enter your unlock code when making short stops.Note: This feature may not work with all car ignition switches.Caution: If you select Continuous, the phone does not power off when you turn off the ignition. Be careful not to drain your vehicle battery if you select this option.Find the FeatureM>Settings >Other Settings >Car Settings >Auto HandsfreePress To1S scroll to On or Off2SELECT(+) confirm the settingFind the FeatureM>Settings >Other Settings >Car Settings >Power-Off Delay
144PRELIMINARYAdjusting Your SettingsCharger TimeWhen your phone is connected to a car kit, you can set it to charge itself for a specified time period after you switch off the ignition. This helps ensure that the phone battery gets fully charged while the vehicle is parked.Note: This feature may not work with all car ignition switches.Press To1S scroll to the time delay2SELECT(+) confirm your selectionFind the FeatureM>Settings >Other Settings >Car Settings >Charger TimePress To1S scroll to the charge time2SELECT(+) confirm your selection
145PRELIMINARYData and Fax CallsData and Fax CallsAn optional Motorola Original™ data kit (which includes a cable connector) lets you transfer data between your phone and a computer, Palm OS® compatible device, or Microsoft Windows CE, Pocket PC, or Handheld PC device. You can:•Synchronize phonebook and datebook information between your phone and a computer or PDA.•Use your phone as a modem to connect to the Internet.•Use your phone to send and receive data and fax calls on your computer or hand-held device.Making a Cable ConnectionInstall the SoftwareTo transfer data between your phone and computer, you must install the software included with the Motorola Original data kit. See the data kit’s user guide for more information.Attach the CableUse a Motorola Original serial cable or Motorola Original USB cable to connect your phone to the external device.Note: Not all devices are compatible with a cable connection. Check your computer or hand-held device to determine the type of cable you need.
146PRELIMINARYData and Fax CallsSerial CableDo This1Plug the serial cable into the detachable head. Make sure that the Motorola logo on the detachable head and the metal shielding on the serial cable plug are both facing you.2With the Motorola logo and the phone both facing you, plug the detachable head into the phone’s accessory connector port.3Plug the other end of the cable into the serial interface connection on the device and tighten the screws. if present.
147PRELIMINARYData and Fax CallsUSB CableSynchronizing DataYou can synchronize phonebook and datebook information between your phone, computer, and PDA with Starfish TrueSync® software, a Motorola accessory product. See the TrueSync user guide for more information.Note: TrueSync software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products.Sending a Data or Fax CallUse this procedure to send data or a fax from a connected device.Connect your phone to the device as described on pages 145-147 and do the following:Do This1Plug the end of the cable with the Motorola logo into the phone’s accessory connector port. Make sure that the logo and the phone are both facing you.2Plug the other end—the USB connection—into the USB port on the external device.
148PRELIMINARYData and Fax CallsReceiving a Data or Fax CallUse this procedure to transfer data or a fax to your computer or hand-held device. Connect your phone to the device as described on pages 145-147.Set Up Your PhoneDo This To1Check the phone make sure that the phone is connected and powered on2Open the application on your computerplace the call through the application (such as dial-up-networking or fax)Note: You cannot dial data or fax numbers through your phone’s keypad. You must dial them through your computer.3End the call from the connected deviceclose the call and connection when the transfer is completeFind the FeatureM>Settings >Other Settings >Connection >Incoming CallDo This To1Press CHANGE(+) select Next Call
149PRELIMINARYData and Fax CallsNote: You cannot answer incoming voice calls when your phone is in data or fax mode. Any voice calls you receive are treated as unanswered calls. To return a voice call, reset your phone to voice mode as described on page 149.Transfer the Data or FaxYour phone notifies you when the data or fax call arrives, and transfers the call to the connected device. Use the application running on the device to answer the call.End the Data/Fax ConnectionWhen the data or fax transfer is complete, end the call from the connected device to close the connection.Reset Normal Voice OperationAfter making a data or fax call, you must reset your phone to resume normal voice operations.Your phone also reverts to normal voice operations when you turn it off and then turn it back on.2Press Sscroll to Data In Only or Fax In Only3Press SELECT(+) set the call format4Connect your phone to the deviceenable the data or fax transferFind the FeatureM>Settings >Other Settings >Connection >Incoming Call >Next Call >NormalDo This To
150PRELIMINARYSecuritySecurityAssigning a New Code or PasswordYour phone’s unlock code is originally set to 1234, and the security code is originally set to 000000. Your service provider may reset these numbers before you receive your phone.If your service provider has not reset these numbers, we recommend that you change them to prevent other users from accessing your personal information. The unlock code must contain four digits, and the security code must contain six digits.Notes: •Your service provider may retain your phone’s security code for customer service purposes. In this case, you will not be able to use phone features that require you to enter the security code.•If the unlock code is the only code you can change, the New Passwords menu is not available. In this case, change the unlock code by selecting: M >Settings >Security >Phone Lock >Unlock Code.To change a code or password:Find the FeatureM>Settings >Security >New Passwords
151PRELIMINARYSecurityIf You Forget a Code or PasswordIf you forget your security code, contact your service provider.If you forget your unlock code, try entering 1234 or the last four digits of your phone number. If that does not work, do the following at the Enter Unlock Code prompt:Press To1S scroll to the code or password2CHANGE(+) select the code or password3keypad keys enter your old code4OK(+) submit your old code5keypad keys enter the new code6OK(+) assign the new code7keypad keys re-enter the new code8OK(+) confirm the new codePress To1M  go to the unlock code bypass screen2keypad keys enter your security code3OK(+) submit your security code
152PRELIMINARYSecurityLocking and Unlocking Your PhoneYou can lock your phone manually or set the phone to lock automatically whenever you turn it off.To use a locked phone, you must enter the unlock code. A locked phone still rings or vibrates for incoming calls or messages, but you must unlock it to answer.You can make emergency calls on your phone even when it is locked. For more information, see page 32.Lock Your Phone ManuallySet Your Phone to Lock AutomaticallyYou can set your phone to lock every time you turn it off.Find the FeatureM>Settings >Security >Phone Lock >Lock NowPress To1keypad keys enter your unlock code2OK(+) lock the phoneFind the FeatureM>Settings >Security >Phone Lock >Automatic Lock >OnPress To1keypad keys enter your unlock code2OK(+) activate automatic lock
153PRELIMINARYSecurityUnlock Your PhoneAt the Enter Unlock Code prompt:Restricting CallsYou can stop all incoming and/or outgoing calls, or you can restrict outgoing calls to the numbers stored in your phonebook.Notes: •You can make emergency calls when outgoing calls are restricted.•Your phone still receives incoming text messages when incoming calls are restricted.Press To1keypad keys enter your unlock code2OK(+) unlock your phoneFind the FeatureM>Settings >Security >Restrict CallsPress To1keypad keys enter your unlock code2OK(+) open the restrict calls menu3S scroll to Outgoing Calls or Incoming Calls4CHANGE(+) select the option5CHANGE (+) change the Allow setting6S scroll to All, None, or Phonebook
154PRELIMINARYSecurityTip: The phonebook is not locked when you restrict outgoing calls to numbers stored in the phonebook. To prevent a user from adding (and then calling) a new phonebook entry, you may want to lock the phonebook. See the “Lock Application” item on page 56.7SELECT(+) select the allowed callsPress To
155PRELIMINARYTroubleshootingTroubleshootingCheck these questions first if you have problems with your phone. If you need additional help, contact the Motorola Customer Call Center at 1-800-331-6456 (United States) or 1-800-461-4575 (Canada).Question AnswerIs your phone set up correctly? Press M #. If you do not see your phone number, contact your service provider.Is your battery charged? Do you see B in the display? The battery level indicator should have at least one segment showing (C). If it does not, recharge your battery. See page 18.Does the handset have a signal? Do you see j in the display? Make sure that your antenna is fully extended. The signal strength indicator should have at least one segment showing (1). If it does not, move to an area with a stronger signal to use your phone.Is the earpiece volume too low? While on a call, press the upper volume key on the side of your phone.
156PRELIMINARYTroubleshootingThe following refer to specific problems:Is the other party unable to hear you? Make sure that your antenna is fully extended and that your phone is not muted. Press UNMUTE(+) if necessary to unmute the phone.Also, make sure that your phone’s microphone is not blocked by its carrying case or a sticker.Has the phone been damaged, dropped, or gotten wet? Dropping your phone, getting it wet, or using a non-Motorola battery or battery charger can damage the phone. The phone’s limited warranty does not cover liquid damage or damage caused from using non-Motorola accessories.Was a non-Motorola battery or battery charger used? Problem SolutionMy phone was stolen. To whom should I report this? Report a stolen phone to the police and to your service provider (the company that sends you your monthly wireless service bill).I forgot my password.See page 151.Question Answer
157PRELIMINARYTroubleshootingI pressed the power key, but nothing happened. Be sure to press and hold P (the power key) until the display appears and you hear an alert. This could take several seconds. If nothing happens, check that a charged battery is installed. See page 17.The display says: Enter Unlock Code. How do I unlock my phone? Enter the factory-preset unlock code (1234), or the last four digits of your phone number. If this fails, call your service provider (the company that sends you your monthly wireless service bill). My phone asks for an unlock code when I try to open a feature. The application you want is locked. If you do not know the unlock code, see page 151.My phone does not ring. If you see t or y in the display, then the ringer is turned off. See page 110.Also, the ringer may be set to Silent even though your phone is set to an audible ring style. See page 110.Problem Solution
158PRELIMINARYTroubleshootingMy phone rings even though I selected the Silent (or Vibrate) ring style. The ringer may be set to play a tone even though your phone is set to a silent ring style. See page 110.I tried to place a call and heard an alternating high/low tone. Your call did not reach the wireless system. You may have dialed the number too soon after turning the phone on. Wait until the display says Ready before making a call.I cannot send/receive calls. Make sure that your antenna is fully extended and that you have a phone signal (see the “Signal Strength Indicator” item on page 24). Avoid electrical or radio interference, and obstructions such as bridges, parking garages, or tall buildings.Your phone also may have the Restrict Calls feature turned on. If you know the unlock code, you can change this setting in the security menu (M >Settings >Security).Problem Solution
159PRELIMINARYTroubleshootingMy phone has poor reception and drops calls. Make sure that your antenna is fully extended and is not bent or damaged.Also, make sure you have a phone signal (see the “Signal Strength Indicator” item on page 24). Stay clear of any obstructions such as bridges, parking garages, or tall buildings.I cannot hear others on my phone. While on a call, press the upper volume key. The display should show the volume increasing.Also, make sure that your phone’s earpiece is not blocked by its carrying case.I cannot open my message inbox. Before you can use text messages, you must set up the message inbox. See page 91.How do I see the calls I sent or received? To see the most recent calls you dialed or received:M>Recent Calls>Received CallsorDialed CallsProblem Solution
160PRELIMINARYTroubleshootingMy phone will not send voicemail commands, passwords, or other codes. Your phone sends commands and passwords as DTMF tones. You can set your phone’s DTMF tones to be Long, Short, or Off. If you have trouble sending numbers, try changing the DTMF setting.1From the idle display, press:M>Settings >Other Settings >Initial Setup >DTMF2Press S to scroll to Long or Short (some analog networks may not recognize short tones).3Press SELECT(+) to select it.My phone’s display is too dark. Use the Contrast feature to change the level of contrast in your display. See page 59.You can also use the Backlight feature to change the length of time that the display backlight stays on. See page 58.Problem Solution
161PRELIMINARYTroubleshootingMy battery didn’t last as long as I expected. What can I do to extend battery life Your battery’s performance is affected by charge time, feature use, temperature changes, backlight use, and other factors. For tips on extending your battery life, see page 28.I am unable to record a voice note, voice name, or voice shortcut. Try moving to a quieter location to make your voice recording. Hold the phone about four inches (10 centimeters) from your mouth, and speak directly into the phone in a normal tone of voice.My TTY device doesn’t work with my phone. Your phone must be set to a TTY mode for the phone to detect your TTY device. See page 140.I plugged the data cable into my phone but my phone did not beep. How do I know if the data cable is ready to go? The beep indicates that you are set up correctly. If you did not hear a beep, make sure that both ends of the data cable are connected—the smaller end to your phone and the larger end to your computer.Also, your computer may have deactivated the port to save power. Try opening an application that uses the port, like a fax or dial-up application, to automatically activate the port.Problem Solution
162PRELIMINARYTroubleshootingMy phone beeped when I attached the data cable, but my data and fax applications don’t work. You must be in an area with digital coverage. Check your phone’s display for the digital signal indicator (F).Some wireless networks may not support data or fax transmission. If you see the digital indicator, but you are roaming on an unfamiliar network, this may be the case.Also, remember that data and fax transmission usually requires a subscription. Call your service provider for more information.When sending data with the data cable, why does the computer show a connection rate of 19200 Kbps? 19200 Kbps is the data transfer rate of the connection between your computer and the phone. The rate of the connection between your phone and the network is displayed on your phone, and will be either 14400 or 9600 Kbps.I can’t end my data call by closing the application on my computer. What can I do? Try pressing O on your phone. Or try disconnecting the cable or turning off the phone. If possible, always close the connection through your computer, as these alternative methods may disrupt the application on your computer.Problem Solution
163PRELIMINARYTroubleshootingI launched the micro-browser but the display says: Service Not Available. You may be in an area without service. If you have wireless service, look in the display for the digital signal indicator (F). If you do not see the indicator, you may be in an area that has only analog service or no service at all. If you see the digital signal indicator, you may be connected to a digital network that does not support Internet access.I launched the micro-browser but the display says: Data Server Unavailable. Try again in a few minutes. The servers may be temporarily busy.Problem Solution
164PRELIMINARYProgramming InstructionsFollow this procedure if you need to program your phone’s phone number(s) or system ID.Note: Programming is normally done by a trained technician at the site of purchase. Users should not make changes other than ones in the following procedure.Before programming, ask your service provider for your:•10-digit MIN (Mobile Identification Number)•8- to 15-digit IMSI (International Mobile Service Identifier)•8- to 15-digit MDN (Mobile Directory Number)•5-digit AMPS Sys ID number•5-digit CDMA Sys ID numberDo This To1Press 7, 4, 6, 6, 3, #, M, M(These keys spell P-H-O-N-E + #, M, M.)open the user activation menu2Press S scroll to NAM1 (phone number 1) or NAM2 (phone number 2)3Press SELECT(+) open the NAM programming menu
165PRELIMINARY4Press the keypad keys for the 10-digit MINopen the MIN editor and enter the new MIN5Press OK(+) store the new MIN6Similarly, enter appropriate numbers for the IMSI, MDN, AMPS Sys ID, and CDMA Sys ID7Press DONE(-) close the NAM programming menu8Press EXIT(-) close the user activation menuDo This To
166PRELIMINARYSpecific Absorption Rate DataThe Motorola V60i V60xwireless phone meets the government’s requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by Health Canada for Canada. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by Health Canada is 1.6W/kg.1 Tests for SAR are conducted using standard operating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output.Before a phone model is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) reported to the FCC and available for review by Industry Canada. The highest SAR value for this model phone when tested for use at the ear is 1.57 W/kg, and when worn on the body, as described in this user guide, is 0.619 W/kg. (Body-worn measurements
167PRELIMINARYmeasurements differ among phone models, depending upon available accessories and regulatory requirements).2While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure.Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site:http://phonefacts.net or the Canadian Wireless Telecommunications Association (CWTA) Web site: http://www.cwta.ca 1. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.2. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.ITC02-155
168PRELIMINARYThe U.S. Food and Drug Administration's Center for Devices and Radiological HealthConsumer Update on Mobile PhonesAdditional Health and Safety InformationFDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is known—and what remains unknown—about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions.Why the concern?Mobile phones emit low levels of radio frequency energy (i.e., radio frequency radiation) in the microwave range while being used. They also emit very low levels of radio frequency energy (RF), considered non-significant, when in the stand-by mode. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known whether, to what extent, or through what mechanism, lower levels of RF might cause adverse health effects as well. Although some research has been done to address these questions, no clear picture of the biological effects of this type of radiation has emerged to date. Thus, the available science does not allow us to conclude that mobile phones are absolutely safe, or that they are unsafe. However, the available scientific evidence does not demonstrate any adverse health effects associated with the use of mobile phones.What kinds of phones are in question?Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna that is positioned close to the user's head during normal telephone conversation. These types of mobile phones are of concern because of the short distance between the phone's antenna—
169PRELIMINARYthe primary source of the RF—and the person's head. The exposure to RF from mobile phones in which the antenna is located at greater distances from the user (on the outside of a car, for example) is drastically lower than that from hand-held phones, because a person's RF exposure decreases rapidly with distance from the source. The safety of so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house and which operate at far lower power levels and frequencies, has not been questioned.How much evidence is there that hand-held mobile phones might be harmful?Briefly, there is not enough evidence to know for sure, either way; however, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods. Animal experiments investigating the effects of RF exposures characteristic of mobile phones have yielded conflicting results. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. In one study, mice genetically altered to be predisposed to developing one type of cancer developed more than twice as many such cancers when they were exposed to RF energy compared to controls. There is much uncertainty among scientists about whether results obtained from animal studies apply to the use of mobile phones. First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the studies that showed increased tumor development used animals that had already been treated with cancer-causing chemicals, and other studies exposed the animals to the RF virtually continuously—up to 22 hours per day.For the past five years in the United States, the mobile phone industry has supported research into the safety of mobile phones. This research has resulted in two findings in particular that merit additional study:1In a hospital-based, case-control study, researchers looked for an association between mobile phone use and either glioma (a type of brain cancer) or acoustic neuroma (a benign tumor of the nerve
170PRELIMINARYsheath). No statistically significant association was found between mobile phone use and acoustic neuroma. There was also no association between mobile phone use and gliomas when all types of types of gliomas were considered together. It should be noted that the average length of mobile phone exposure in this study was less than three years.When 20 types of glioma were considered separately, however, an association was found between mobile phone use and one rare type of glioma, neuroepithelliomatous tumors. It is possible with multiple comparisons of the same sample that this association occurred by chance. Moreover, the risk did not increase with how often the mobile phone was used, or the length of the calls. In fact, the risk actually decreased with cumulative hours of mobile phone use. Most cancer causing agents increase risk with increased exposure. An ongoing study of brain cancers by the National Cancer Institute is expected to bear on the accuracy and repeatability of these results.12Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material. The cells in this assay showed changes after exposure to simulated cell phone radiation, but only after 24 hours of exposure. It is possible that exposing the test cells to radiation for this long resulted in heating. Since this assay is known to be sensitive to heating, heat alone could have caused the abnormalities to occur. The data already in the literature on the response of the micronucleus assay to RF are conflicting. Thus, follow-up research is necessary.2FDA is currently working with government, industry, and academic groups to ensure the proper follow-up to these industry-funded research findings. Collaboration with the Cellular Telecommunications Industry Association (CTIA) in particular is expected to lead to FDA providing research
171PRELIMINARYrecommendations and scientific oversight of new CTIA-funded research based on such recommendations.Two other studies of interest have been reported recently in the literature:1Two groups of 18 people were exposed to simulated mobile phone signals under laboratory conditions while they performed cognitive function tests. There were no changes in the subjects' ability to recall words, numbers, or pictures, or in their spatial memory, but they were able to make choices more quickly in one visual test when they were exposed to simulated mobile phone signals. This was the only change noted among more than 20 variables compared.32In a study of 209 brain tumor cases and 425 matched controls, there was no increased risk of brain tumors associated with mobile phone use. When tumors did exist in certain locations, however, they were more likely to be on the side of the head where the mobile phone was used.Because this occurred in only a small number of cases, the increased likelihood was too small to be statistically significant.4In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems associated with use of mobile phones. FDA continues to work with all parties, including other federal agencies and industry, to assure that research is undertaken to provide the necessary answers to the outstanding questions about the safety of mobile phones.What is known about cases of human cancer that have been reported in users of hand-held mobile phones?Some people who have used mobile phones have been diagnosed with brain cancer. But it is important to understand that this type of cancer also occurs among people who have not used mobile phones. In fact, brain cancer occurs in the U.S. population at a rate of about 6 new cases per 100,000 people each year. At that rate, assuming 80 million users of
172PRELIMINARYmobile phones (a number increasing at a rate of about 1 million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones. Thus it is not possible to tell whether any individual's cancer arose because of the phone, or whether it would have happened anyway. A key question is whether the risk of getting a particular form of cancer is greater among people who use mobile phones than among the rest of the population. One way to answer that question is to compare the usage of mobile phones among people with brain cancer with the use of mobile phones among appropriately matched people without brain cancer. This is called a case-control study. The current case-control study of brain cancers by the National Cancer Institute, as well as the follow-up research to be sponsored by industry, will begin to generate this type of information.What is FDA's role concerning the safety of mobile phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as mobile phones before marketing, as it does with new drugs or medical devices. However, the agency has authority to take action if mobile phones are shown to emit radiation at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of mobile phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions at this time, FDA has urged the mobile phone industry to take a number of steps to assure public safety. The agency has recommended that the industry:•support needed research into possible biological effects of RF of the type emitted by mobile phones•design mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function
173PRELIMINARY•cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human healthAt the same time, FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of mobile phone safety to ensure a coordinated effort at the federal level. These agencies are:•National Institute for Occupational Safety and Health•Environmental Protection Agency•Federal Communications Commission•Occupational Health and Safety Administration•National Telecommunications and Information AdministrationThe National Institutes of Health also participates in this group.In the absence of conclusive information about any possible risk, what can concerned individuals do?If there is a risk from these products—and at this point we do not know that there is—it is probably very small. But if people are concerned about avoiding even potential risks, there are simple steps they can take to do so. For example, time is a key factor in how much exposure a person receives. Those persons who spend long periods of time on their hand-held mobile phones could consider holding lengthy conversations on conventional phones and reserving the hand-held models for shorter conversations or for situations when other types of phones are not available.People who must conduct extended conversations in their cars every day could switch to a type of mobile phone that places more distance between their bodies and the source of the RF, since the exposure level drops off dramatically with distance. For example, they could switch to:•a mobile phone in which the antenna is located outside the vehicle
174PRELIMINARY•a hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package•a headset with a remote antenna to a mobile phone carried at the waist Again, the scientific data do not demonstrate that mobile phones are harmful. But if people are concerned about the radio frequency energy from these products, taking the simple precautions outlined above can reduce any possible risk.Where can I find additional information?For additional information, see the following Web sites:Federal Communications Commission (FCC) RF Safety Program (select “Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters”):http://www.fcc.gov/oet/rfsafety World Health Organization (WHO) International Commission on Non-Ionizing Radiation Protection (select Qs & As): http://www.who.int/emf United Kingdom, National Radiological Protection Board:http://www.nrpb.org.uk Cellular Telecommunications Industry Association (CTIA): http://www.wow-com.com U.S. Food and Drug Administration (FDA) Center for Devices and Radiological Health:http://www.fda.gov/cdrh/consumer/
175PRELIMINARY1. Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant Brain Tumors. In: State of the Science Symposium;1999 June 20; Long Beach, California.2. Tice et al. Tests of mobile phone signals for activity in genotoxicity and other laboratory assays. In: Annual Meeting of the Environmental Mutagen Society; March 29, 1999, Washington, D.C.; and personal communication, unpublished results.3. Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A. Effect of a 915-MHz simulated mobile phone signal on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999.4. Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of cellular telephones and the risk for brain tumors: a case-control study. Int. J. Oncol., 15: 113-116, 1999.ITC00-010
176PRELIMINARYMotorola Limited Warranty for the United States and CanadaWarrantyWhat Does this Warranty Cover?Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, pagers, and consumer and professional two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certified accessories sold for use with these Products (“Accessories”) and Motorola software contained on CD-ROMs or other tangible media and sold for use with these Products (“Software”) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:Products and AccessoriesProducts Covered Length of CoverageProducts and Accessories as defined above, unless otherwise provided for below.One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap™ covers and cases.Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.Monaural Headsets. Ear buds and boom headsets that transmit mono sound through a wired connection.Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.
177PRELIMINARYExclusionsNormal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage.Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage.Consumer and Professional Two-Way Radio Accessories. Ninety (90) days from the date of purchase by the first consumer purchaser of the product.Products and Accessories that are Repaired or Replaced. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer.Products Covered Length of Coverage
178PRELIMINARYAltered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded from coverage.Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage.SoftwareExclusionsSoftware Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided “as is” and without warranty.Who is Covered?This warranty extends only to the first consumer purchaser, and is not transferable.What Will Motorola Do?Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent Products Covered Length of CoverageSoftware. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or floppy disk).Ninety (90) days from the date of purchase.
179PRELIMINARYreconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service.How to Obtain Warranty Service or Other Information?You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.What Other Limitations Are There?ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT USA Phones 1-800-331-6456Two-Way Radios 1-800-353-2729Pagers 1-800-548-9954Canada All Products 1-800-461-4575TTY 1-888-390-6456For Accessories and Software, please call the telephone number designated above for the product with which they are used.
180PRELIMINARY(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.ITC02-162
181PRELIMINARYProduct RegistrationOnline Product Registration:http://www.motorola.com/warranty Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your product require an update or other service. Registration is for U.S. residents only and is not required for warranty coverage.Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status.Thank you for choosing a Motorola product.Export Law AssurancesThis product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade.
182PRELIMINARYIndexAaccessoriesoptional  10, 86, 124, 140, 142, 145standard  17accessory connector port  1active line indicatordefined  24illustration  23Add Digits feature  65alarm  79, 81alarm clock  83–85alertcreating  112–117defined  110reminders, turning on/off  118selecting  110–111setting  96, 130turning off  32analog signal indicatordefined  24illustration  23animation  59inserting  107–108managing  77–78screen saver  138–139screen saver, setting  78, 95, 130storing  94, 129–131answering a call  22antenna  21application, locking  57appointments. See datebookAttach Number feature  34, 65auto PIN dial  58automatic location information (ALI)  139automatic redialturning on/off  58using  30–31Bbacklight  58banner text  62batterycar kit charger time  144charging  18–19extending battery life  25, 28–29, 58, 59installing  17–18level indicator  19, 23, 24
183PRELIMINARYmeter  54block cursor, defined  41browse text mode  42browser alerts  97browser. See micro-browserCcalculator  132–134calendar. See datebookcalladding digits after phone number  65alert, creating  112–117alert, selecting  110–111alert, turning off  32answer options  56answering  22call waiting  36calling card  71canceling  32datebook, opening  37deleting  64–65dialed calls list  35, 37, 64–65dialing  21dialing a recent call  64–65emergency number  32ending  22in-call timer  56making  21message center, accessing  37muting  37prefix digits, inserting  34received calls list  35, 37, 64–65receiving  22recent calls  64–65restricting  153–154ring style, setting  110ring style, setting in external display  27speakerphone, activating  37storing  64–65three-way call  36timing  66–67unanswered call  27, 31voice dial  35Call Failed message  30call timers  66–67call waiting  36caller ID  31calling card call  71calling line identification. See caller IDcar kitautomatic answer  142automatic hands-free  143charger time  144
184PRELIMINARYpower-off delay  143clock  23codeschanging  150–151default  21, 150if you forget a code/password  151computersynchronizing data  76contrast, display  59convertible covers  19–20currency converter  134cursor  41Ddata callmaking  145–149date, setting  58datebookadding an event  81alarm  81alarm clock  83–85calendar  79changing event information  81copying an event  82day view  80deleting an event  83event reminders, turning on/off  118event view  80reminders  81synchronizing  147week view  79deleting a call  64–65dialed calls list  35, 37, 64–65dialing a number  21digital signal indicatordefined  24illustration  23displayanimation  59backlight  58banner text  62contrast  59described  23–25greeting  61idle display  23illustration  23language  59zoom setting  59zooming in/out  25drafts folder  53DTMF tones  37, 60, 65, 160Eearpieceillustration  1volume, adjusting  26email
185PRELIMINARYaddress, storing in phonebook  69–71email, sending  74, 103–106emergency number  32end key  38functions  1, 22ending a call  22Enter Unlock Code message  151, 153event alert  110–111exchange rate, calculating  134external devicesynchronizing data  76external display  27Ffactory settings, resetting  60–61flashing cursor, defined  41flipexternal display and  27open to answer call  56turning the phone on  21FM Stereo Radio Headset  52, 86–88Ggames  135–136Get It Now applications  135–136greeting, display  61Hhands-free modeautomatic answer  142automatic call routing  143charger time  144defined  142external display and  27power-off delay  143speakerphone, activating  37headsetautomatic answer  142FM Stereo Radio Headset  52, 86–88use with external display  27headset jack  1Iidle display, defined  23in use indicatordefined  24illustration  23inbox, text message  91in-call timer  56incoming callcanceling  32Incoming Call message  31indicatorsactive line  23, 24
186PRELIMINARYbattery level  19, 23, 24digital/analog signal  23, 24in use  23, 24location privacy  23loud ring style  25, 110menu  23, 24message waiting  23, 24, 92, 97, 100missed call  31ring style  23, 25, 110roam  23, 24signal strength  23, 24silent alert  25silent ring style  25, 110soft ring style  25, 110vibrate and ring style  25, 110vibrate style  25, 110voice message waiting  24, 90voice name  68information services  98information services messagereminders, receiving  100iTAP software  47–50Kkeyend  1, 22, 38left soft key  1, 23, 38, 137menu  1, 10, 24, 38power  1, 21right soft key  1, 23, 38, 137scroll  1, 38send  1, 22, 64smart  1, 26–27smart key  137voice  1, 73, 122volume control  1, 26, 38keypadanswering calls  56volume, setting  112Llanguage, setting  59left soft keycustomizing  137functions  1, 23, 38location privacy indicatorillustration  23location, sending to network  139lockapplications  57phone  152–153voice notes  126lock application feature  57loud ring style indicator  25, 110
187PRELIMINARYLow Battery message  24Mmaking a call  21master clear  61master reset  60Memory is Full! message  92, 100menuBrowser Menu  129Calculator Menu  132Datebook Menu  79, 80Dialing Menu  34, 66entering text  40–41, 42–50features  51–63language, setting  59Last Calls Menu  65lists  39locking applications  57My Tones Menu  116, 117navigating  10, 38personalizing  137Phonebook Menu  68Quick Note Menu  107rearranging features  137scroll feature  59Text Msg Menu  93–94using features  10, 39–41Voice Notes Menu  123, 124, 125menu indicatordefined  24illustration  23menu key  1, 10, 24, 38messageanimation  94–97, 107–108browser alerts  97deleting, text  92–94dialing number from  34drafts folder  53inbox setup, text message  91information services  98locking, text  92–94outbox  52, 109picture  94–97, 107–108quick note  106–107quick view  102reading, text  92–94receiving, text  92reminders, receiving  90, 92reminders, turning on/off  118sending  34, 103–106sound  94–97, 107–108status  109text  91–109voicemail  89–90message waiting indicator  97, 100defined  24
188PRELIMINARYdisplayed  92illustration  23micro-browseranimation  129–131background sessions  131browser alerts  97picture  129–131sound  129–131using  128–129microphone  1missed call indicator  31Missed Call message  31missed call, dialing  35Missed Calls message  27muting a call  37my telephone number  3, 22, 37, 54my tones  112–117Nnetwork settings  62notepaddefined  65entering digits  65retrieving digits  65number, viewing your own  3, 54numeric text mode  42Oone-touch dialdefined  33using  33voicemail number  33optional accessory, defined  10optional feature, defined  10outbox  52, 109Ppasswords. See codespause character  72phoneactive line indicator  24alert, turning off  32answer options  56automatic location information  139codes  150–151erase user-entered information  61feature specifications  37, 55flip  21information  37location  139locking  152–153reset all options  60security code  150specifications  37, 55turning on/off  21unlock code  21, 150, 151unlocking  21, 152–153
189PRELIMINARYphone numberactive line indicator  24active phone line, changing  54adding digits after  65attaching to prefix digits  34attaching two numbers  65redialing  30seeing your own  22, 37sending text message to  34storing in phonebook  69–71viewing your own  3, 54voice dial  35phonebookattaching two numbers  65deleting an entry  75dialing a number  74editing an entry  75email address  68entry details  68entry name  68number type indicator  68one-touch dial  33phone number  68prefix digits, inserting  34ringer ID, activating/deactivating  111ringer ID, defined  70, 111ringer ID, setting  70sending an email  74sorting entries  75speed dial number  68, 70speed dial number, defined  33speed dial, using  33storing an entry  69–71synchronizing  147synchronizing entries  76voice name entry  73voice name indicator  68pictureinserting  107–108managing  77–78screen saver  138–139screen saver, setting  78, 95, 130storing  94, 129–131PIN codedialing automatically  58storing with phonebook entry  71power key  1, 21predictive text entry  47–50Qquick note  106–107
190PRELIMINARYdefined  91quick view messagedefined  102Rradio  86–88received calls list  35, 37, 64–65recent calls  64–65redialautomatic redial  30–31busy number  30remindersdatebook  81defined  118information services message  100text message  92turning on/off  118voicemail message  90restricting calls  153–154right soft keycustomizing  137functions  1, 23, 38ring alertselecting  110–111turning off  32ring stylecustomizing  110–112defined  110indicators  25, 110setting  110setting in external display  27ring style indicatordefined  25, 110illustration  23ringervolume, adjusting  26volume, setting  112ringer IDactivating/deactivating  111defined  70, 111setting for phonebook entry  70roam indicatordefined  24illustration  23Sscreen saver  138–139setting  78, 95, 130scroll feature  59scroll key  1, 38security codechanging  150–151send key  1, 22, 64short message service. See text messageshortcutscreating  119–120standard  119using  121
191PRELIMINARYsignal strength indicatordefined  24illustration  23silent alert indicator  25silent ring style indicator  25, 110smart keycustomizing  137defined  26–27functions  26–27illustration  1SMS. See text messagesoft keyscustomizing  137functions  23, 38illustration  1labels  23soft ring style indicator  25, 110soundinserting  107–108setting as alert tone  96, 130storing  94, 129–131speakerphone, activating  37speed dialchanging number  70number, defined  33sorting phonebook entries by  75using  33standby timedefined  26increasing  29status light  1, 25–26, 58storing a call  64–65symbol text mode  46–47symbols, entering  46–47synchronizing data  76Ttap method text entry  43–45telephone number, viewing your own  3, 54textblock cursor  41browse mode  42character chart  45entering from keypad  42–50entry mode, changing  42flashing cursor  41iTAP software predictive text entry  47–50numeric mode  42symbol chart  46symbol mode  46–47tap method  43–45text messageanimation  94–97, 107–108defined  91
192PRELIMINARYdeleting  92–94dialing number from  34drafts folder  53inbox setup  91locking  92–94outbox  52picture  94–97, 107–108quick note  106–107reading  92–94receiving  92reminders  92sending  34, 103–106sound  94–97, 107–108status  109text mode, changing  42three-way call  36time, setting  58timers  66–67travel charger, using  18TrueSync  76, 147TTY device  140–142Uunlockphone  152–153unlock code  151bypassing  151changing  150–151entering  21, 152, 153Vvibrate alertselecting  110–111turning off  32vibrate and ring styleindicator  25, 110vibrate ring stylesetting  110setting in external display  27vibrate styleindicator  25, 110voice dialdialing a number  35, 74recording voice name  73voice keydialing a number  35functions  1recording a voice name  73recording a voice note  122voice message waiting indicator  24, 90voice namedefined  73phonebook indicator  68recording  73voice notes  122–127voice shortcutcreating  119–120defined  119using  121voicemail
193PRELIMINARYdialing with one-touch dial  33reminders, turning on/off  118using  89–90volumeearpiece  26keypad  112ringer  26, 112volume keys  1, 26, 38Wwait character  72warranty  176–180Web pages  128–129Zzoom setting  59zooming in/out  25 U.S. patent Re. 34,976
194PRELIMINARY
✂PRELIMINARY195Wireless Phone Safety Tips“Safety is your most important call!”Your Motorola wireless telephone gives youthe powerful ability to communicate by voice—almost anywhere, anytime, wherever wirelessphone service is available and safe conditions allow. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your firstresponsibility. If you find it necessary to use your wireless phone while behind the wheel of a car, practice good common sense and remember the following tips:1 Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
✂PRELIMINARY1962 When available, use a hands-free device. If possible, add an additional layer of convenience to your wireless phone with one of the many Motorola Original™ hands-free accessories available today.3 Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4 Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.5 If you receive an incoming call at an inconvenient time do not take notes or look up phone numbers while driving. Jotting down a “to do” list or going through your address book takes attention away from your primary responsibility—driving safely.6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.7 Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations which have the potential to divert your attention away from the road.
✂PRELIMINARY1978 Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.*9 Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.*10 Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.** Wherever wireless phone service is available.
✂PRELIMINARY198Check the laws and regulations on the use of wireless telephones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas.For more information,please call1-888-901-SAFEor visit theCTIA Web site atwww.wow-com.com™ITC00-011

Navigation menu