Motorola Mobility T56CM1 Portable Cellular/ PCS Transceiver (AMPS/CDMA) User Manual Exhibit 8 Preliminary Users Manual Draft
Motorola Mobility LLC Portable Cellular/ PCS Transceiver (AMPS/CDMA) Exhibit 8 Preliminary Users Manual Draft
Contents
- 1. Exhibit 8 Preliminary Users Manual Draft
- 2. Supplemental Response to CRN 6421
Exhibit 8 Preliminary Users Manual Draft
APPLICANT: MOTOROLA, INC. FCC ID: IHDT56CM1
EXHIBIT 8
INSTRUCTION MANUAL
A preliminary draft copy of the Users Manual follows:
PRELIMINARY
Motorola V60x
(Phoenix)
CDMA R1.2
Verizon
Mobile Phone User Guide
Preliminary Review Draft
August 2, 2002
PRELIMINARY
1
PRELIMINARY
Welcome
Welcome to the world of Motorola digital wireless
communications! We are pleased that you have chosen the
Motorola V60x wireless phone.
Earpiece
Headset Jack
Insert headset
accessory for
hands-free use.
Status Light
See incoming call
and service status.
Volume Keys
Adjust earpiece
and ringer volume.
Smart Key
Select menu items,
send and end calls.
Voice Key
Record voice notes,
phonebook and
shortcut names.
Display
Microphone
Accessory
Connector Port
Insert charger and
phone accessories.
Power Key
Right Soft Key
Perform functions
identified by right
display prompt.
Menu Key
End Key
End phone calls,
exit menu system.
Scroll Key
Move through
menus and lists.
Left Soft Key
Perform functions
identified by left
display prompt.
Send Key
Send and answer
calls, view recent
dialed calls list.
2
PRELIMINARY
Personal Communications Sector
600 North U.S. Highway 45
Libertyville, Illinois 60048
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States)
1-800-461-4575 (Canada)
www.motorola.com
(United States)
www.motorola.ca
(Canada)
MOTOROLA, the Stylized M Logo and all other trademarks indicated as
such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off.
TrueSync, Sidekick, Starfish, and the Stylized Starfish Logo are registered
trademarks of Starfish Software, Inc., a wholly owned independent
subsidiary of Motorola, Inc. All other product or service names are the
property of their respective owners.
© 2001, 2002 Motorola, Inc. All rights reserved.
Software Copyright Notice
The Motorola products described in this manual may include copyrighted
Motorola and third party software stored in semiconductor memories or
other media. Laws in the United States and other countries preserve for
Motorola and third party software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to distribute or
reproduce the copyrighted software. Accordingly, any copyrighted
software contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in any manner to the
extent allowed by law. Furthermore, the purchase of the Motorola
products shall not be deemed to grant either directly or by implication,
estoppel, or otherwise, any license under the copyrights, patents, or
patent applications of Motorola or any third party software provider,
except for the normal, non-exclusive, royalty-free license to use that
arises by operation of law in the sale of a product.
Manual number: XXXX-O
Cover number: 8988485L49-O
3
PRELIMINARY
Menu Map
Main Menu
• Recent Calls
• Received Calls
• Dialed Calls
• Notepad
• Call Times
• Phonebook
• Datebook
•Radio*
• Messages
•Voicemail
• Create Message
•Inbox
• Outbox
• Quick Notes
•Drafts
• Browser Alerts
•Shortcuts
• Voice Notes
•Browser
• Calculator
• Picture Viewer
•GetItNow
•Settings
(see next page)
Shortcuts
Change display zoom:
Press
M
, then
press and hold
M
Display my phone number:
Press
M#
Dial voicemail number:
Press and hold
1
Go to dialed calls list:
Press
N
Exit menu system:
Press
O
* This is the standard phone menu layout.
Menu organization and feature names
may vary on your phone. Not all features
may be available for all users.
For example, the
Radio
option (left) is
available only when the optional FM
Stereo Radio Headset accessory is
plugged into your phone.
4
PRELIMINARY
Settings Menu
•Ring Styles
•Style
•Style Detail
• My Tones
• Phone Status
•My Tel. Number
• Active Line
• Battery Meter
• Other Information
•Browser Setup
• In-Call Setup
• In-Call Timer
• Answer Options
• Security
• Phone Lock
• Lock Application
• Restrict Calls
•New Passwords
• Location
• Other Settings
• Initial Setup
• Time and Date
• Auto PIN Dial
• Auto Redial
• Backlight
• Status Light
•Zoom
• TTY Setup
•Scroll
• Animation
• Language
• Contrast
•DTMF
•Master Reset
• Master Clear
• Personalize
•Main Menu
•Keys
•Greeting
• Banner
• Connection
•Network
• Car Settings
• Headset
5
PRELIMINARY
Contents
Menu Map
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
About This Guide
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Safety and General Information
. . . . . . . . . . . . . . . . . . . 11
Getting Started
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
What’s in the Box?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Changing the Convertible Covers . . . . . . . . . . . . . . . . . 19
Turning Your Phone On . . . . . . . . . . . . . . . . . . . . . . . . . 21
Making a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Ending a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Seeing Your Phone Number . . . . . . . . . . . . . . . . . . . . . 22
About Your Phone
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Zooming In and Out. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the Status Light . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adjusting Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using the Smart Key . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using the External Display . . . . . . . . . . . . . . . . . . . . . . 27
Battery Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Making and Answering Calls
. . . . . . . . . . . . . . . . . . . . . 30
Redialing a Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using Automatic Redial . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Returning an Unanswered Call . . . . . . . . . . . . . . . . . . . 31
Calling an Emergency Number . . . . . . . . . . . . . . . . . . . 32
Turning Off a Call Alert . . . . . . . . . . . . . . . . . . . . . . . . . 32
6
PRELIMINARY
Canceling an Incoming Call . . . . . . . . . . . . . . . . . . . . . . 32
Calling With Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . 33
Calling With One-Touch Dial. . . . . . . . . . . . . . . . . . . . . . 33
Calling a Number In a Text Message . . . . . . . . . . . . . . . 34
Additional Calling Features . . . . . . . . . . . . . . . . . . . . . . . 34
Using Features While On a Call
. . . . . . . . . . . . . . . . . . . 36
Using Call Waiting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . 36
Additional On-Call Features . . . . . . . . . . . . . . . . . . . . . . 37
Using the Menu
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Navigating to a Feature. . . . . . . . . . . . . . . . . . . . . . . . . . 38
Selecting a Feature Option . . . . . . . . . . . . . . . . . . . . . . . 39
Entering Feature Information . . . . . . . . . . . . . . . . . . . . . 40
Entering Text
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Choosing a Text Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Using Tap Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Using Symbol Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Using iTAP™ Software Predictive Text Entry Method . . . 47
Menu Feature Descriptions
. . . . . . . . . . . . . . . . . . . . . . . 51
Recent Calls
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Viewing Received Calls or Dialed Calls . . . . . . . . . . . . . 64
Using the Notepad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Viewing and Resetting Call Timers . . . . . . . . . . . . . . . . . 66
Phonebook
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Viewing Entry Details . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Storing a Phonebook Entry. . . . . . . . . . . . . . . . . . . . . . . 69
Storing a PIN Code With the Phone Number . . . . . . . . . 71
Recording a Voice Name For a Phonebook Entry . . . . . 73
Dialing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . . 74
Editing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . . 75
Deleting a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . 75
7
PRELIMINARY
Sorting the Phonebook List . . . . . . . . . . . . . . . . . . . . . . 75
Synchronizing with TrueSync Software . . . . . . . . . . . . . 76
Picture Viewer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Datebook
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Week View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Day View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Event View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Adding a Datebook Event . . . . . . . . . . . . . . . . . . . . . . . 81
Changing Event Information . . . . . . . . . . . . . . . . . . . . . 81
Copying an Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Deleting an Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Radio
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Turning the Radio On and Off . . . . . . . . . . . . . . . . . . . . 86
Tuning a Station. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Storing a Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Selecting a Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Sending and Receiving Calls With the Radio On . . . . . 87
Messages—Voicemail
. . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Storing Your Voicemail Number. . . . . . . . . . . . . . . . . . . 89
Receiving a Voicemail Message . . . . . . . . . . . . . . . . . . 90
Listening to a Voicemail Message . . . . . . . . . . . . . . . . . 90
Turning Off the Voice Message Waiting Indicator . . . . . 90
Messages—Text
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Setting Up the Text Message Inbox. . . . . . . . . . . . . . . . 91
Receiving a Text Message . . . . . . . . . . . . . . . . . . . . . . 92
Reading, Locking, or Deleting a Text Message . . . . . . . 92
Storing Pictures, Animations, and Sounds . . . . . . . . . . 94
Reading Browser Alerts . . . . . . . . . . . . . . . . . . . . . . . . 97
Reading Information Service Messages . . . . . . . . . . . . 98
Sending a Text Message . . . . . . . . . . . . . . . . . . . . . . . 103
8
PRELIMINARY
Sending a Quick Note Text Message . . . . . . . . . . . . . . 106
Inserting Pictures, Animations, and Sounds . . . . . . . . . 107
Viewing the Status of Sent Text Messages. . . . . . . . . . 109
Ring Styles
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Selecting a Ring Style. . . . . . . . . . . . . . . . . . . . . . . . . . 110
Customizing a Ring Style . . . . . . . . . . . . . . . . . . . . . . . 110
Creating Alert Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Setting Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Shortcuts
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Standard Shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Creating a Shortcut. . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Voice Notes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Recording a Voice Note . . . . . . . . . . . . . . . . . . . . . . . . 122
Viewing the Voice Notes List. . . . . . . . . . . . . . . . . . . . . 123
Playing a Voice Note. . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Locking and Unlocking a Voice Note. . . . . . . . . . . . . . . 126
Deleting a Voice Note . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Micro-Browser
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Starting a Micro-Browser Session . . . . . . . . . . . . . . . . 128
Interacting With Web Pages . . . . . . . . . . . . . . . . . . . . . 129
Downloading Pictures, Animations, and Sounds . . . . . 129
Running the Micro-Browser in the Background. . . . . . . 131
Calculator
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Calculating Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Converting Currency. . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Get It Now
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Launching an Application . . . . . . . . . . . . . . . . . . . . . . . 135
Editing Network Connection Settings . . . . . . . . . . . . . . 135
Using Control Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Analyzing or Deleting an Application . . . . . . . . . . . . . . 136
9
PRELIMINARY
Adjusting Your Settings
. . . . . . . . . . . . . . . . . . . . . . . . 137
Reordering Menu Items. . . . . . . . . . . . . . . . . . . . . . . . 137
Customizing a Soft Key Function . . . . . . . . . . . . . . . . 137
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Hiding or Showing Location Information . . . . . . . . . . . 139
TTY Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Hands-Free Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Data and Fax Calls
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Making a Cable Connection . . . . . . . . . . . . . . . . . . . . 145
Synchronizing Data . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Sending a Data or Fax Call . . . . . . . . . . . . . . . . . . . . . 147
Receiving a Data or Fax Call. . . . . . . . . . . . . . . . . . . . 148
Security
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Assigning a New Code or Password . . . . . . . . . . . . . . 150
If You Forget a Code or Password. . . . . . . . . . . . . . . . 151
Locking and Unlocking Your Phone. . . . . . . . . . . . . . . 152
Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Programming Instructions
. . . . . . . . . . . . . . . . . . . . . . 164
Specific Absorption Rate Data
. . . . . . . . . . . . . . . . . . 166
Additional Health and Safety Information
. . . . . . . . . 168
Warranty
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Product Registration
. . . . . . . . . . . . . . . . . . . . . . . . . . 181
Export Law Assurances
. . . . . . . . . . . . . . . . . . . . . . . . 181
Index
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Wireless Phone Safety Tips
. . . . . . . . . . . . . . . . . . . . . 195
10
PRELIMINARY
About This Guide
This user guide introduces you to the many features in your
Motorola wireless phone.
Navigating To a Menu Feature
Use the menu system to access your phone’s features. This
guide shows you how to select a menu feature as follows:
This example shows that you must press
M
, scroll to and
select
Messages
, then scroll to and select
Create Message
.
Optional Features
This label identifies an optional network or
subscription-dependent feature that may not be
offered by all service providers in all geographical
areas. Contact your service provider for more
information.
Optional Accessories
This label identifies a feature that requires an optional
Motorola Original™ accessory.
Find the Feature
M
>
Messages
>
Create Message
11
PRELIMINARY
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING YOUR PHONE.
The information provided in this document supersedes the general safety
information contained in user guides published prior to July 2000. For
information regarding radio use in a hazardous atmosphere please refer
to the Factory Mutual (FM) Approval Manual Supplement or Instruction
Card, which is included with radio models that offer this capability.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Operational Characteristics
Your phone contains a transmitter and a receiver. When it is ON, it
receives and transmits radio frequency (RF) energy. The phone operates
in the frequency range of 824 MHz to 849 MHz in analog and digital mode
and 1851.25 MHz to 1908.75 MHz in digital mode.
When you communicate with your phone, the system handling your call
controls the power levels at which your phone transmits. The output
power level typically may vary over a range from 0.05 watts to 0.56 watts
in analog mode and 0.0 watts to 0.32 watts in digital mode.
Exposure To Radio Frequency Energy
Your Motorola phone is designed to comply with the following national
and international standards and guidelines regarding exposure of human
beings to radio frequency electromagnetic energy:
12
PRELIMINARY
•
United States Federal Communications Commission, Code of
Regulations; 47 CFR part 2 sub-part J
•
American National Standards Institute (ANSI) / Institute of Electrical
and Electronic Engineers (IEEE) C95. 1-1992
•
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999
Edition
•
National Council on Radiation Protection and Measurements
(NCRP) of the United States, Report 86, 1986
•
International Commission on Non-Ionizing Radiation Protection
(ICNIRP) 1998
•
Ministry of Health (Canada) Safety Code 6. Limits of Human
Exposure to Radiofrequency Electromagnetic Fields in the
Frequency Range from 3 kHz to 300 GHz, 1999
•
Australian Communications Authority Radiocommunications
(Electromagnetic Radiation-Human Exposure) Standard 1999
To assure optimal phone performance and make sure human exposure to
radio frequency electromagnetic energy is within the guidelines set forth
in the above standards, always adhere to the following procedures:
Portable Phone Operation and EME Exposure
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage the
phone and may violate FCC regulations.
Do NOT hold the antenna when the phone is in use.
Holding the
antenna affects call quality and may cause the phone to operate at a
higher power level than needed.
Phone Operation
When placing or receiving a phone call, hold your phone as you would a
wireline telephone.
Speak directly into the microphone.
13
PRELIMINARY
Body-Worn Operation
To maintain compliance with FCC/Health Canada RF exposure
guidelines, if you wear a phone on your body when transmitting, always
place the phone in a Motorola-supplied or approved clip, holder, holster,
case, or body harness for this product. Use of non-Motorola-approved
accessories may exceed FCC/Health Canada RF exposure guidelines. If
you do not use one of the Motorola-supplied or approved body-worn
accessories, and are not using the phone held in the normal use position,
ensure the phone and its antenna are at least one inch
(2.5 centimeters) from your body when transmitting.
Data Operation
When using any data feature of the phone, with or without an accessory
cable,
position the phone and its antenna at least one inch
(2.5 centimeters) from your body.
Approved Accessories
For a list of approved Motorola accessories, visit our website at
www.mot.com
.
Electromagnetic Interference/Compatibility
Note:
Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, designed, or otherwise
configured for electromagnetic compatibility.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn
off your phone in any facility where posted notices instruct you to do so.
Hospitals or health care facilities may be using equipment that is sensitive
to external RF energy.
Aircraft
When instructed to do so, turn off your phone when on board an aircraft.
Any use of a phone must be in accordance with applicable regulations per
airline crew instructions.
14
PRELIMINARY
Medical Devices
Pacemakers
The Advanced Medical Technology Association recommends that a
minimum separation of 6 inches (15 centimeters) be maintained between
a handheld wireless phone and a pacemaker. These recommendations
are consistent with the independent research by, and recommendations
of, the United States Food and Drug Administration.
Persons with pacemakers should:
•
ALWAYS keep the phone more than six inches (15 centimeters)
from your pacemaker when the phone is turned ON.
•
NOT carry the phone in the breast pocket.
•
use the ear opposite the pacemaker to minimize the potential for
interference.
•
turn OFF the phone immediately if you have any reason to suspect
that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of
your device to determine if it is adequately shielded from RF energy. Your
physician may be able to assist you in obtaining this information.
15
PRELIMINARY
Safety and General Use While Driving
Check the laws and regulations on the use of phones in the area where
you drive. Always obey them.
When using your phone while driving, please:
•
give full attention to driving and to the road.
•
use hands-free operation, if available.
•
pull off the road and park before making or answering a call if driving
conditions so require.
Operational Warnings
For Vehicles With an Air Bag
Do not place a portable phone in the area over an air bag or in the air bag
deployment area. Air bags inflate with great force. If a portable phone is
placed in the air bag deployment area and the air bag inflates, the phone
may be propelled with great force and cause serious injury to occupants
of the vehicle.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a potentially explosive
atmosphere, unless the phone is a model specifically identified as being
“Intrinsically Safe.” Do not remove, install, or charge batteries in such
areas. Sparks in a potentially explosive atmosphere can cause an
explosion or fire resulting in bodily injury or even death.
Note:
The areas with potentially explosive atmospheres referred to above
include fueling areas such as below decks on boats, fuel or chemical
transfer or storage facilities, areas where the air contains chemicals or
particles, such as grain, dust, or metal powders, and any other area
where you would normally be advised to turn off your vehicle engine.
Areas with potentially explosive atmospheres are often but not always
posted.
16
PRELIMINARY
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn OFF your
phone when you are near electrical blasting caps, in a blasting area, or in
areas posted: “Turn off two-way radio.” Obey all signs and instructions.
Operational Cautions
Antennas
Do not use any portable phone that has a damaged antenna.
If a
damaged antenna comes into contact with your skin, a minor burn can
result.
Batteries
All batteries can cause property damage and/or bodily injury such as
burns if a conductive material such as jewelry, keys, or beaded chains
touches exposed terminals. The conductive material may complete an
electrical circuit (short circuit) and become quite hot. Exercise care in
handling any charged battery, particularly when placing it inside a pocket,
purse, or other container with metal objects.
ITC01-101
17
PRELIMINARY
Getting Started
Getting Started
What’s in the Box?
Your wireless phone typically comes equipped with a
battery and a charger. Other accessory options can
customize your phone for maximum performance and
portability.
To purchase Motorola Original™ accessories, contact the
Motorola Customer Call Center at 1-800-331-6456 in the
United States or 1-800-461-4575 in Canada.
Installing the Battery
You must install and charge the battery to use your phone.
Your phone is designed to be used only with
Motorola Original batteries and accessories. We
recommend that you store batteries in their
protective cases when not in use.
Do This
1
Remove the battery from its protective clear
plastic case.
2
If necessary, push
down the battery
door release latch
and lift the door off
of the phone.
Release
latch
18
PRELIMINARY
Getting Started
Charging the Battery
New batteries are shipped partially charged. Before you
can use your phone, you need to install and charge the
battery, as indicated by the following instructions. Some
batteries perform best after several full charge/discharge
cycles.
3
Insert the battery,
printed arrow first,
under the tab
at
the top of the
battery
compartment and
push down.
4
Insert the ridge at
the bottom of the
battery door into
the base of the
phone, then push
the door down and
snap it into place.
Do This
1
Plug the
travel
charger into
your phone
with the
release tab
facing up.
Do This
Release
tab
19
PRELIMINARY
Getting Started
Note:
When you charge the battery, the battery level
indicator in the upper right corner of the display shows how
much of the charging process is complete.
Changing the Convertible
Covers
You can replace the flip cover and battery cover on
your phone to personalize its appearance.
Matching front and back cover sets are available in
a variety of colors and designs.
Your phone is designed to be used only with Motorola
Original accessories. See your Motorola retailer for these
convertible covers.
2
Plug the other end of the travel charger into the
appropriate electrical outlet.
3
When your phone indicates that the battery is
fully charged (
Charge Complete
), press the
release tab and remove the travel charger.
Do This
20
PRELIMINARY
Getting Started
Remove a Flip Cover
Attach a Flip Cover
Do This
1
Open your flip
phone half way.
2
Press in the tiny
silver release
button with your
fingernail. This
button is on the
side of the top half
of the phone.
3
While pressing the
silver button in,
slide the cover off
the phone.
Do This
1
Close your flip phone.
2
Line up the ridges
on each side of
the cover so that
they align with the
slots on the
phone.
3
Slide the cover onto the phone until it snaps into
place.
21
PRELIMINARY
Getting Started
Turning Your Phone On
Making a Call
Do This To
1
Open your phone expose the keypad
2
Press and hold
P
turn on your phone
3
If necessary, enter
your four-digit
unlock code and
press
OK
(
+
)
unlock your phone
The unlock code is
originally set to 1234.
Your service provider may
change this number
before you receive your
phone.
Do This To
1
Extend the
antenna
optimize signal reception
Tip:
You may have to pull on
the antenna a second time to
fully extend it.
Power
key
22
PRELIMINARY
Getting Started
Ending a Call
Answering a Call
When you receive a call, your phone rings and/or vibrates
and displays an incoming call message.
Tip:
If your phone is locked, you must unlock it to answer
the call.
Seeing Your Phone Number
2
Press the
keypad keys
dial the phone number
Tip:
If you make a mistake,
press
DELETE
(
-
) to delete
the last digit, or press and
hold
DELETE
(
-
) to clear all
digits.
3
Press
N
make the call
Press To
O
end the call
Press To
N
or
ANSWER
(
+
)answer the call
Press To
M#
see your phone number
Do This To
23
PRELIMINARY
About Your Phone
About Your Phone
See page 1 for a basic phone diagram.
Using the Display
The idle display is the standard display that you see when
you are not on a call or using the menu.
Labels at the bottom corners of the display show the
current soft key functions. A
M
(menu) indicator at the
bottom center of the display indicates that you can press
M
to enter the main menu.
12:00am
F
PH.BOOK MESSAGE
M
O,N&5E
è
wP
Clock
➐
Battery
Level
Indicator
➌
In Use
Indicator
➍
Roam
Indicator
➎
Location
Indicator
➏
Message
Waiting
Indicator
➓
Ring Style
Indicator
➊
Signal
Strength
Indicator
➋
Digital/
Analog
Signal
Indicator
➑
Active
line
Indicator
➒
Menu
Indicator
Soft Key Labels
24
PRELIMINARY
About Your Phone
➊
Signal Strength Indicator
Vertical bars show the
strength of the network connection. You cannot make or
receive calls when the
j
(no signal) indicator is displayed.
➋
Digital (
F
) or Analog (
I
) Signal
Indicator
Shows whether you are receiving a
digital or analog signal.
➌
In Use Indicator
Shows that a call is in progress.
➍
Roam Indicator
Shows that your phone
is seeking or using another network system
outside your home network.
➎
Location Information Indicator
Indicates when your Location Information is
available
N
or unavailable
M
.
➏
Message Waiting Indicator
Appears when
you receive a voicemail or text message.
➐
Battery Level Indicator
Vertical bars show the battery
charge level. Recharge the battery when you see
Low Battery
and hear the low battery alert.
➑
Active Line Indicator
Shows the current
active phone line.
➒
Menu Indicator
Indicates that you can press
M
to
enter the main menu or open a feature sub-menu.
25
PRELIMINARY
About Your Phone
➓
Ring Style Indicator
Shows the ring style setting.
Zooming In and Out
Press and release
M
, then press and hold
M
to
zoom in and out on the display. Zoom in to increase
text size, zoom out to display more information.
You can also zoom in and out from the menu. See
page 58.
Using the
Status Light
The status light shows when
you have an incoming call or
message, or when your
phone is roaming (using a
non-home system).
The status light initially is turned off to extend battery life.
To turn it on, see “Initial Setup” on page 58.
w
= loud ring
x
=soft ring
y
=vibrate
u
= vibrate and ring
t
= silent
Indication Status
alternating red/green incoming call
flashing green in service, home system
flashing yellow roaming, non-home system
flashing red no service
Status
light
26
PRELIMINARY
About Your Phone
Note:
Turning on the status light will substantially reduce
your phone’s standby time, the length of time that your
phone’s battery retains power when the phone is turned on
but is not in use.
Adjusting
Volume
Press the up and
down volume keys to:
•
increase and
decrease
earpiece volume during a call
•
increase and decrease the ringer volume setting when
the idle display is visible (flip must be open)
Using the
Smart Key
The smart key gives
you another way to
perform many basic
phone functions. It
anticipates the next
action you are likely to
perform. For example, when you highlight a menu item,
you can press the smart key to select it. You can use the
smart key to make and end calls, toggle features on and
off, and open your phonebook. The smart key usually
performs the same function as the right soft key (
+
).
Volume
keys
Smart
key
External
display
27
PRELIMINARY
About Your Phone
Note:
The smart key provides an optional way to do some
things faster. It is never the only way to perform a task.
Using the External Display
When the flip is closed, the external display shows the
time and date. It also displays messages to notify you of
incoming calls and other events. You can perform the
following functions in the external display.
Set Phone Ring Style
Return an Unanswered Call
Your phone keeps a record of your unanswered calls and
displays
X Missed Calls
in the external display.
Note:
Because the microphone and earpiece are
unavailable when the phone is closed, you must use a
headset or other hands-free device with this feature.
Press To
1
volume keys scroll to
Style
2
smart key select a ring style
3
volume keys return to the idle display
Press To
1
smart key see the received calls list
2
volume keys scroll through the list and
select a call to return
3
smart key make the call
28
PRELIMINARY
About Your Phone
Battery Use
Battery performance depends on many factors, including
your wireless carrier’s network configuration; signal
strength; the temperature at which you operate your
phone; the features and/or settings you select and use;
and your voice, data, and other application usage patterns.
Battery Care
Caution:
To prevent injuries or burns, do not allow
metal objects to contact or short-circuit the battery
terminals.
To maximize your battery’s performance:
•
Always use Motorola Original™ batteries and battery
chargers. The phone warranty does not cover
damage caused from using non-Motorola batteries
and/or battery chargers.
•
New batteries or batteries that have been stored for
long periods of time may require a longer charge time.
•
Maintain the battery at or near room temperature
when charging.
•
Do not expose batteries to temperatures below
-10°C (14°F) or above 45°C (113°F). Always take your
phone with you when you leave your vehicle.
•
When you do not intend to use a battery for a while,
store it uncharged in a cool, dark, dry place, such as a
refrigerator.
•
Over extended periods of time, batteries gradually
wear down and require longer charging times. This is
29
PRELIMINARY
About Your Phone
normal. If you charge your battery regularly and notice
a decrease in talk time or an increase in charging
time, then it is probably time to purchase a new
battery.
The rechargeable batteries that power this
product must be disposed of properly and may
need to be recycled. Refer to your battery’s label
for battery type. Contact your local recycling center for
proper disposal methods. Never dispose of batteries in
a fire because they may explode.
Extending Battery Life
• Turn off the status light
The status light uses power. To turn it off, see “Initial
Setup” on page 58.
• Turn off the display backlight
The backlight uses power. To turn it off, see “Initial
Setup” on page 58.
• Minimize keypad-intense functions
Activities that require intensive keystroke use (such as
playing a game or using messaging) reduce your
phone’s talk and standby time.
30
PRELIMINARY
Making and Answering Calls
Making and
Answering Calls
For basic instructions on how to make a call, end a call,
and answer a call, see pages 21–22.
Redialing a Number
If you hear an ordinary busy signal:
Using Automatic Redial
If the network is busy, you hear a fast busy signal, and
your phone displays
Call Failed
.
With automatic redial, your phone automatically redials the
number for four minutes. When the call goes through, your
phone rings or vibrates one time, displays
Redial Successful
, and then connects the call.
You must turn on automatic redial to use the feature. See
the “Auto Redial” option on page 58.
Press To
1
O
hang up
2
N
redial the busy number
31
PRELIMINARY
Making and Answering Calls
When automatic redial is turned off, you can manually
activate the feature to redial a phone number. When you
hear a fast busy signal and see
Call Failed
:
Using Caller ID
Calling line identification (caller ID) displays the
phone number for incoming calls.
The phone displays the caller’s name when the
name is stored in your phonebook, or
Incoming Call
when caller ID information is not available.
Returning an Unanswered
Call
Your phone keeps a record of your unanswered calls, and
displays:
•
the
T
(missed call) indicator
•
X Missed Calls
Y Unknown
, where
X
is the total
number of missed calls and
Y
is the number of missed
calls with no caller ID information
Press To
N
or
RETRY
(
+
)activate automatic redial
Press To
1
VIEW
(
+
) see the received calls list
2
S
select a call to return
3
N
make the call
32
PRELIMINARY
Making and Answering Calls
Calling an Emergency Number
Your service provider programs one or more emergency
phone numbers, such as 911, that you can call under any
circumstances, even when your phone is locked.
Note:
Emergency numbers vary by country. Your phone’s
preprogrammed emergency number(s) may not work in all
locations, and sometimes an emergency call cannot be
placed due to network, environmental, or interference
issues.
Turning Off a Call Alert
You can turn off your phone’s incoming call alert before
answering the call.
Canceling an Incoming Call
While the phone is ringing or vibrating:
Press To
1
keypad keys dial the emergency number
2
N
call the emergency number
Press To
either volume key turn off the alert
Press To
O
or
IGNORE
(
-
)cancel the incoming call
33
PRELIMINARY
Making and Answering Calls
Depending on your phone settings and/or
service subscription, the call may be forwarded
to another number, or the caller may hear a
busy signal.
Calling With Speed Dial
Each entry you store in your phonebook is assigned a
unique speed dial number. To speed dial a phonebook
entry:
Calling With One-Touch Dial
To call phonebook entries 1 through 9, just press and hold
the one-digit speed dial number for one second.
We recommend that you reserve phonebook entry 1
(speed dial number 1) for storing and dialing your
voicemail number. In many cases, your service provider
has already done this for you. If necessary, see page 69 to
store your voicemail number for one-touch dial access.
Press To
1
keypad keys enter the speed dial number
for the entry you want to call
2
#
submit the number
Note:
Some
networks let you
skip this step for
speed dial
numbers 1 through 99.
3
N
call the entry
34
PRELIMINARY
Making and Answering Calls
Calling a Number In a Text
Message
To call a phone number embedded in a text
message that you receive:
Additional Calling Features
While dialing (with digits visible in the display), open
the
Dialing Menu
to perform the following tasks:
Press To
1
M
open the
Text Msg Menu
2
S
scroll to
Call Back
3
SELECT
(
+
) call the number
Press To
M
>
Attach Number
attach a number from the
phonebook or recent call lists
M
>
Send Message
open a new text message
with the number in the
To
field
35
PRELIMINARY
Making and Answering Calls
You can also call a number using these features:
Do This To Call
Press and release the voice
key, then say a voice name
a phonebook entry
using voice dial
To record a voice
name, see page 73.
Press
M
>
Recent Calls
>
Received Calls
or
Dialed Calls
> entry to call
a missed call, or a
recent received or
dialed call
Voice
key
36
PRELIMINARY
Using Features While On a Call
Using Features While
On a Call
Using Call Waiting
When you are on a call, an alert tone sounds to
indicate that you have received a second call.
Making a Three-Way Call
During a call, you can call and connect a
third party for a three-way call. You cannot
do this if you already have a call on hold.
Press To
1
N
answer the new call
2
N
switch back to the first call
Press To
1
keypad keys dial the third party’s number
Note:
Some networks may
require you to press
N
first.
2
N
call the number
3
N
connect the two calls
4
O
end the entire call
37
PRELIMINARY
Using Features While On a Call
Additional On-Call Features
Press To
MUTE
(
+
) (if available)
or
M
>
Mute
mute the call
SPEAKER
(
+
) (if
available) or
M
>
Spkrphone On
activate an attached
speakerphone during an
active call
M
>
My Tel. Number
see your phone number
M
>
Send Tones
send a number to the
network as DTMF tones,
for credit card or
password calls
To activate DTMF tones,
see the “DTMF” option
on page 5959.
M
>
Received Calls
or
Dialed Calls
view recent received or
dialed call numbers
M
>
Messages
view or send messages
M
>
Datebook
view datebook entries
M
>
Other Information
view phone
specifications
38
PRELIMINARY
Using the Menu
Using the Menu
Navigating to a Feature
Use these keys to move through the menu system:
Main Menu
Recent Calls
Service Dial
EXIT SELECT
Menu Key
Enter menu system,
or open a sub-menu,
when
M
appears in
bottom center of
display.
Right Soft Key
Perform function
shown in lower
right corner of
display (usually
SELECT
the
highlighted
menu item).
Left Soft Key
Perform function
shown in lower
left corner of
display (usually
EXIT
or
BACK
).
Scroll Key
Scroll up or down
through menus
and lists. From
idle display,
press up or
down to open
phonebook.
*
and
#
Cycle through
and set the
value of the
highlighted
menu item.
End Key
Exit menu system
without making
changes, return
to idle display.
Volume Keys
Scroll up or
down through
menus and lists.
39
PRELIMINARY
Using the Menu
Selecting a Feature Option
Some features require you to select an item from a list:
•
Press
S
to scroll up or down to highlight the item you
want.
•
In a numbered list, press a number key to highlight the
item.
•
In an alphabetized list, press a key multiple times to
cycle through the letters on the key and highlight the
closest matching list item.
Dialed Calls
10) John Smith
9) Mary Smith
BACK VIEW
Press
BACK
(
-
)
to go back to
the previous
screen.
Press
M
to
open the sub-menu.
Highlighted
item
Press
VIEW
(
+
) to view
details of the highlighted item.
M
40
PRELIMINARY
Using the Menu
Entering Feature Information
Some features require you to enter information:
•
Enter numbers or text with the keypad.
•
When an item has a list of possible values, press
*
or
#
to scroll through and select a value.
•
When an item has a list of possible values, press
S
to the left or right to scroll through and select a value.
•
When an item has a list of possible numeric values,
press a number key to set the value.
•
If you enter or edit information and do not want to
save your changes, press
O
to exit without saving.
Entry Details
Name:John Smith
No.:2125551212
CANCEL CHANGE
Press
S
to
scroll down
to additional
items.
Press
CANCEL
(
-
) to exit
without making changes.
DONE
(
-
) appears when
you enter or edit information.
Press
CHANGE
(
+
)
to edit the
information.
Highlighted
item
41
PRELIMINARY
Using the Menu
The message center lets you compose and send text
messages. A flashing cursor shows where text will appear:
When you enter text using the standard tap method, the
flashing cursor changes to a block cursor, and the soft key
functions change:
Msg:
CANCEL BROWSE
Press
BROWSE
(
+
)
to view and
insert a
quick note.
Press
CANCEL
(
-
) to exit
without making changes.
Flashing
cursor
indicates
insertion
point.
Press
M
to open
the sub-menu.
M
Msg:
T
DELETE OK
Press
OK
(
+
)
to accept
and store
the text.
Press
DELETE
(
-
)
to delete the character
to the left of the insertion
point.
Block
cursor
indicates
current
highlighted
character.
After two seconds, the
block cursor reverts to a
flashing cursor and moves
to the next position.
M
42
PRELIMINARY
Entering Text
Entering Text
Multiple text entry methods make it easy for you to
enter names, numbers, and messages on your phone.
Choosing a Text Mode
Press
M
from any text entry screen to select a text
mode:
Note:
The text mode you select remains active until you
change it by selecting another mode.
iTAP
Let the phone predict each word as you
enter it. See page 47.
Tap Method
Enter letters, numbers, and symbols by
pressing a key one or more times. See
page 43.
Numeric
Enter numbers only.
Symbol
Enter symbols only. See page 46.
Browse
Browse your phonebook or recent call
lists to select a name or number.
43
PRELIMINARY
Entering Text
Using Tap Method
This is the standard mode for entering text on your
phone.
Press
M
from any text entry screen and select the
Tap Method
menu option.
Do This To
1
Press a number
key one or more
times
select a letter, number, or
symbol shown in the
“Character Chart” on page 45
2
Continue
pressing number
keys
enter the remaining
characters
3
Press
OK
(
+
) store the text when you are
finished
44
PRELIMINARY
Entering Text
General Text Entry Rules
Press a number key repeatedly to cycle through its
characters. See “Character Chart” on page 45.
•
If you do not press a key for two seconds, the
character in the block cursor is accepted, and the
cursor moves to the next position.
•
The first character of every sentence is capitalized.
(Press
S
down to force the character to lowercase
while it is highlighted by the block cursor).
Msg:
CANCEL
BROWSE
Change
letter in
block cursor
to uppercase
or lowercase.
Press a number
key as many
times as
necessary
to enter the
desired
character at
flashing cursor
location.
Press and hold
a number key
to cycle
between text
entry modes.
Move flashing
cursor to the
left or right in
text message.
45
PRELIMINARY
Entering Text
•
Your phone may support multiple languages. The
current language setting determines whether a new
message begins on the left or right side of the
display.
You can switch languages within a message.
Press
M
to select the text mode and language
you want to use.
Character Chart
Use this chart as a guide for entering spaces, letters,
numbers, and symbols with the tap method.
Note:
This chart may not reflect the exact character set
available on your phone.
1
space . 1 ? ! , @ _ & ~ : ; " -
( ) ' ¿ ¡ % £ $ ¥
2
a b c 2 ä å á à â ã
α
β
ç
3
d e f 3
δ
ë é è ê
ε
φ
4
g h i 4 ï í î
γ
η
ι
5
j k l 5
κ
λ
6
m n o 6 ñ ö ø ó ò ô õ
µ
υ
ω
7
p q r s 7
π
ß
σ
8
t u v 8
θ
ü ú ù û
τ
9
w x y z 9
ξ ψ
0
+ - 0 x * / \ [ ] = > < # §
46
PRELIMINARY
Entering Text
Using Symbol Mode
Your phone provides an alternate way to enter symbol
characters in a message. Press
M
from any text
entry screen and select the
Symbol
menu option.
Symbol Chart
Use this chart as a guide for entering characters in symbol
mode.
Do This To
1
Press a number
key one time
display its symbol options at
the bottom of the display
See “Symbol Chart” on
page 46.
2
Press
*
or
#
or
Press the
number key
multiple times
highlight the symbol you want
3
Press
SELECT
(
+
)
enter the symbol at the
flashing cursor location
1
space . ? ! , @ _ &
~ : ; " - ( ) ' ¿ ¡ %
£ $ ¥
2
@ _ \
3
/ : ;
4
" & '
47
PRELIMINARY
Entering Text
Using iTAP™ Software
Predictive Text Entry Method
iTAP™ software provides a predictive text entry method
that lets you enter a word using one keypress per letter.
Press
M
from any text entry screen and select the
iTAP
menu option.
Enter Words
5
( ) [ ] { }
6
¿ ¡ ~
7
< > =
8
$ £ ¥
9
# % *
0
+ - x * / = > < # §
Do This To
1
Press a number
key one time
enter the first letter of the
word
The letters associated with
the key are shown at the
bottom of the display.
2
Press number
keys (one per
letter)
enter the rest of the word
Alternative words and letter
combinations are shown at
the bottom of the display. The
word choices are updated
with each keypress.
48
PRELIMINARY
Entering Text
For example, to spell the word “act,” press
2
2
8
.
The display shows:
Enter Novel Words
You may enter a word that the iTAP software does not
recognize. If the word you want is not displayed:
3
Press
*
or
#
highlight the word you want
4
Press
SELECT
(
+
)
enter the word at the flashing
cursor location
A space is automatically
inserted after the word.
Do This To
1
Press
DELETE
(
-
)
one or more times
delete letters until you
see a letter combination
that matches the start of
the word
Do This To
Act Cat Bat Abu }
DELETE SELECT
Press
SELECT
(
+
) to
insert the highlighted word.
Press
DELETE
(
-
)
to clear the last letter.
Flashing
cursor
indicates
insertion
point.
Press
S
to
scroll and see
additional word
choices.
49
PRELIMINARY
Entering Text
Punctuation
Capitalization
The first word of a sentence is automatically capitalized,
with following words in lowercase.
2
Press
*
or
#
highlight the letter or
letter combination
3
Press
SELECT
(
+
),
then press
*
shift the text entry cursor
to the left and “lock” the
selected word portion
4
Continue to enter
letters and highlight
letter combinations
spell the word
Press To
0
or
1
enter punctuation or other
characters as shown in the
“Character Chart” on page 45
Press To
S
change the words to initial
character capitalized, all
uppercase characters, or all
lowercase characters
Do This To
50
PRELIMINARY
Entering Text
Enter Numbers
Delete Letters and Words
Place the cursor to the right of the text you want to delete,
and then do the following:
Do This To
1
Enter the first
digit and then
highlight it
put the iTAP software in
number entry mode
2
Press number
keys
add digits to the number
3
Press
SELECT
(
+
)
enter the number at the
flashing cursor location
Do This To
Press
DELETE
(
-
) delete one letter at a time
Hold
DELETE
(
-
) delete the entire message
51
PRELIMINARY
Menu Feature Descriptions
Menu Feature
Descriptions
This chapter describes all of your phone’s features in order
of the menu map shown on pages 3–4.
Main Menu
R
ECENT
C
ALLS
Received Calls
M
>
Recent Calls
>
Received Calls
View a list of recently received calls. See page 64.
Dialed Calls
M
>
Recent Calls
>
Dialed Calls
View a list of recently dialed calls. See page 64.
Notepad
M
>
Recent Calls
>
Notepad
Call or store the last number entered on the keypad.
See page 65.
Call Times
M
>
Recent Calls
>
Call Times
View call timers that track time spent on
your last call, dialed calls, received calls,
all calls since reset, and all calls total. See page 66.
P
HONEBOOK
M
>
Phonebook
Store names and numbers as entries in your
phonebook, then call numbers by selecting them
from the phonebook list. See page 68.
52
PRELIMINARY
Menu Feature Descriptions
D
ATEBOOK
M
>
Datebook
Use the datebook calendar to schedule and review
your appointments. See page 79.
R
ADIO
M
>
Media Center
>
Radio
Listen to FM radio stations with the optional
Motorola Original™ FM Stereo Radio
Headset accessory. This menu feature is
displayed only when the FM Stereo Radio
Headset is plugged into the accessory
connector port on your phone. See page 86.
M
ESSAGES
M
>
Messages
Adjust message settings, view and
manage the various types of messages
your phone can receive and/or send:
Create Message
Create new text messages.
See page 103.
Voicemail
Listen to your recorded
voice messages. See
page 89.
Text Msgs
Read and manage text
messages. See page 91.
Quick Notes
Select and send pre-written
messages from the quick
notes list. See page 106.
Outbox
View all outgoing text
messages, delivered and
undelivered.
53
PRELIMINARY
Menu Feature Descriptions
S
HORTCUTS
M
>
Shortcuts
Create keypad or voice shortcuts to menu features.
See page 119.
V
OICE
N
OTES
M
>
Voice Notes
Use the voice key to record messagesand
phone calls. See page 122.
Note:
Recording phone calls is subject to
varying state and federal laws regarding privacy
and recording of conversations.
B
ROWSER
M
>
Browser
The micro-browser delivers WAP
(Wireless Application Protocol) pages
from your service provider directly to your
phone. See page 128.
C
ALCULATOR
M
>
Calculator
Use your phone as a calculator or currency
converter. See page 132.
P
ICTURE
V
IEWER
M
>
Picture Viewer
View and manage the pictures and animations
stored on your phone. See page 77.
G
ET
I
T
N
OW
M
>
Get It Now
Access games and applications on your
phone. See page 135.
Drafts
Store and edit text
messages that you have
written but not sent.
54
PRELIMINARY
Menu Feature Descriptions
Settings Menu
R
ING
S
TYLES
Style
M
>
Ring Styles
>
Style
Select the ring style your phone uses to notify you
of incoming calls, messages, or other events. See
page 110.
Style Detail
M
>
Ring Styles
> Style
Detail
Change details about the current ring style.
Style represents the name of the ring style. See
page 110.
My Tones
M
>
Ring Styles
>
My Tones
Create custom alert tones for your phone. See
page 112.
P
HONE
S
TATUS
My Tel. Number
M
>
Settings
>
Phone Status
>
My Tel. Number
View, enter, and edit information about your name
and phone number.
Active Line
M
>
Settings
>
Phone Status
>
Active Line
Change the active phone line to send and receive
calls from either of the available numbers.
Battery Meter
M
>
Settings
>
Phone Status
>
Battery Meter
View a detailed battery charge meter.
55
PRELIMINARY
Menu Feature Descriptions
Other Information
M
>
Settings
>
Phone Status
>
Other Information
View your phone’s feature specifications
(if available from the service provider).
G
ET
I
T
N
OW
T
OOLS
Get It Now System
M
>
Settings
>
Get It Now Tools
>
Get It Now Syste
m
View the Get It Now software version in your
phone, and view information about the phone
memory available for Get It Now applications. See
page 135.
Network Access
M
>
Settings
>
Get It Now Tools
>
Network Access
Approve Internet connections for Get It Now
applications. See page 135.
DNS IP
M
>
Settings
>
Get It Now Tools
>
Network Access
Set up a valid domain name service (DNS) IP
address so you can run Get It Now applications that
require an active network connection. In many
cases, your service provider has already entered
this address for you. Contact your service provider
to obtain the DNS IP address, if necessary.
56
PRELIMINARY
Menu Feature Descriptions
Server IP
M
>
Settings
>
Get It Now Tools
>
Network Access
Set up a valid Server IP address so you can run
Get It Now applications that require an active
network connection. In many cases, your service
provider has already entered this address for you.
Contact your service provider to obtain the DNS IP
address, if necessary.
I
N
-C
ALL
S
ETUP
Set the features that are active during a call,
such as the in-call timer and call answering
options.
In-Call Timer
M
>
Settings
>
In-Call Setup
>
In-Call Timer
Adjust call timer
Display
and
Beep
settings. You can
set your timer to beep at a selected interval during
your calls. (60 seconds is the default.) You can also
turn on or off a display timer during calls as follows:
Answer Options
M
>
Settings
>
In-Call Setup
>
Answer Options
Turn call answering options on or off:
Time
Display the elapsed time for
the current call.
Off
No in-call timer display.
Multi-Key
Answer by pressing any key.
Open to Answer
Answer by opening the flip.
57
PRELIMINARY
Menu Feature Descriptions
S
ECURITY
Phone Lock
M
>
Settings
>
Security
>
Phone Lock
Lock and unlock your phone. See page 152.
Lock Application
M
>
Settings
>
Security
>
Lock Application
Lock and unlock specific phone applications (such
as phonebook or datebook). When an application is
locked, users must enter the unlock code to use
the application.
Restrict Calls
M
>
Settings
>
Security
>
Restrict Calls
Restrict incoming and outgoing calls. See
page 153.
New Passwords
M
>
Settings
>
Security
>
New Passwords
Change your unlock code (originally set to 1234) or
your security code (originally set to 000000). See
page 150.
L
OCATION
M
>
Settings
>
Location
If your phone has the automatic location
information (ALI) feature, it can tell the
phone network where you are physically located.
See page 139.
58
PRELIMINARY
Menu Feature Descriptions
O
THER
S
ETTINGS
Initial Setup
M
>
Settings
>
Other Settings
>
Initial Setup
Set many basic phone options:
Time and Date
Set the phone’s time and
date.
Auto PIN Dial
Some networks
require an
authenticating PIN
code to allow
outgoing calls. Use this
feature to automatically dial
your PIN.
Auto Redial
Use this option to turn on or
turn off the automatic redial
feature. When you turn on
automatic redial, your phone
automatically redials calls
that fail due to busy network
conditions. See page 30.
Backlight
Set the amount of time that
the display backlight
remains on, or turn off the
backlight to conserve
battery power.
Status Light
Turn the status light off (to
conserve battery power)
and on.
59
PRELIMINARY
Menu Feature Descriptions
Zoom
Switch between three lines
(
Zoom Out
) and two lines
(
Zoom In
) of display text.
TTY Setup
Set your phone to
operate in one of
three TTY modes,
or return to normal
Voice
mode. See page 140.
Scroll
Force the cursor to stop or
wrap around when it
reaches the top or bottom of
a list in the display.
Animation
Turn animation off (to
conserve battery power) or
on. Animation makes your
phone’s menus move
smoothly as you scroll up
and down.
Language
Set the language for phone
menus.
Contrast
Adjust the contrast setting
for your display.
60
PRELIMINARY
Menu Feature Descriptions
DTMF
Your phone can send a
number to the network as
dual tone multi-frequency
(DTMF) tones. DTMF tones
are used to communicate
with automated systems
that require you to enter a
number such as a code,
password, or credit card
number. Use this option to
set DTMF tones to be long,
short, or off.
Master Reset
Reset all options back to
their original factory settings
except for the unlock code,
security code, and lifetime
timer.
61
PRELIMINARY
Menu Feature Descriptions
Personalize
M
>
Settings
>
Other Settings
>
Personalize
Set several personal phone options:
Master Clear
Reset all options back to
their original factory settings
except for the unlock code,
security code, and lifetime
timer, and clear all user
settings and entries.
Note:
This option erases all
user-entered information
stored in your phone’s
memory, including
phonebook and datebook
entries. Once you erase the
information, it cannot be
recovered.
Main Menu
Change the order of the
main menu. See page 137.
Home Keys
Change the functions of the
soft keys and smart key in
the idle display. See
page 137.
Greeting
Change the text
displayed when
you turn on your
phone.
62
PRELIMINARY
Menu Feature Descriptions
Connection
M
>
Settings
>
Other Settings
>
Connection
Connect your phone to a computer or
hand-held device to send and receive data and fax
calls on the connected device. Specify the format
for the next incoming call. You can select
FaxInOnly
,
Data In Only
, or
Normal
. See
page 153.
Network
M
>
Settings
>
Other Settings
>
Network
View and adjust your phone’s network
settings.
Your service provider registers your phone to a
network. You can view information about the
current network, change how your phone searches
for a network, and activate alerts that indicate when
a call is dropped or network registration changes.
Banner
Change the text that
appears in the idle display.
Note:
Banner text does not
appear in your phone’s
external display.
Screen Saver
Change your phone’s
screen saver image. See
page 138.
63
PRELIMINARY
Menu Feature Descriptions
Car Settings
M
>
Settings
>
Other Settings
>
Car Settings
Adjust hands-free car kit settings.
You can set your phone to route calls directly to the
car kit when it detects a connection, and
automatically answer calls after two rings. See
page 142.
Note:
The use of wireless devices and their
accessories may be prohibited or restricted in
certain areas. Always obey the laws and
regulations on the use of these products.
Headset
M
>
Settings
>
Other Settings
>
Headset
Set your phone to automatically answer
calls after two rings when connected to a headset.
See page 142.
64
PRELIMINARY
Recent Calls
Recent Calls
Viewing Received Calls or
Dialed Calls
Your phone keeps a list of the calls you recently received
and dialed, even if the calls did not connect. The lists are
sorted from newest to oldest entries. The oldest entries are
deleted as new ones are added.
Shortcut:
Press
N
to go directly to the dialed calls list
from the idle display.
Find the Feature
M
>
Recent Calls
Press To
1
S
scroll to
Received Calls
or
Dialed Calls
2
SELECT
(
+
) select the list
3
S
scroll to an entry
Note:
<
means the call
connected.
4
N
or
VIEW
(
+
)
or
M
call the entry’s number
view entry details
open the
Last Calls Menu
to
perform other procedures as
described in the following list
65
PRELIMINARY
Recent Calls
The
Last Calls Menu
can include the following options:
Using the Notepad
Your phone stores the most recent string of digits entered
on the keypad in a temporary memory location called the
notepad. This can be a phone number that you called, or a
number that you entered but did not call. To retrieve the
number stored in the notepad:
Option Description
Store
Create a phonebook entry with
the number in the
No.
field.
Delete
Delete the entry.
Delete All
Delete all entries in the list.
Send Message
Open a new text message with the
number in the
To
field.
Add Digits
Add digits after the number.
Attach Number
Attach a number from the
phonebook or recent call lists,
after the highlighted number.
Send Tones
Send the number to the network
as DTMF tones, for credit card or
password calls.
Find the Feature
M
>
Recent Calls
>
Notepad
66
PRELIMINARY
Recent Calls
Viewing and Resetting Call
Timers
Network connection time is the elapsed time from the
moment you connect to your service provider's network
to the moment you end the call by pressing
O
. This time
includes busy signals and ringing.
The amount of network connection time you track on
your resettable timer may not equal the amount of
time for which you are billed by your service provider.
For billing information, please contact your service
provider directly.
You can view the following network connection
times:
Press To
N
or
M
or
STORE
(
+
)
call the number
open the
Dialing Menu
to
attach a number or insert a
special character
create a phonebook entry
with the number in the
No.
field
67
PRELIMINARY
Recent Calls
To view a call timer:
To reset the call timer:
Timer Description
Last Call
Approximate time spent on last
dialed or received call. You cannot
reset this timer.
Dialed Calls
Approximate time spent on dialed
calls since the last time you reset
this timer.
Received Calls
Approximate time spent on
received calls since the last time
you reset this timer.
All Calls
Approximate time spent on dialed
and received calls since the last
time you reset this timer.
Lifetime
Approximate time spent on all
calls on this phone. You cannot
reset this timer.
Find the Feature
M
>
Recent Calls
>
Call Times
Press To
1
S
scroll to the timer you want
2
SELECT
(
+
) view the recorded time
Press To
1
RESET
(
+
) reset the time (if available)
2
YES
(
-
) confirm the reset
Phonebook
68
PRELIMINARY
Phonebook
You can store a list of names and phone numbers or email
addresses in your phone’s electronic phonebook.
To see the names in your phonebook, press
M
>
Phonebook
from the idle display. Scroll to a name
and press
VIEW
(
+
) to view details of the phonebook
entry as shown below.
Viewing Entry Details
Note:
When you set a distinctive ringer alert for an entry,
the
Ringer ID
setting appears below the speed dial number.
$*Carlo Emrys
2154337215
Speed No.15
BACK EDIT
M
Entry’s
phone
number
or
email address
Type
indicator
identifies
number type:
$
Work
U
Home
S
Main
h
Mobile
Z
Fax
p
Pager
[
Email
Voice Name
indicator
indicates a recorded
voice name Entry’s
Name
Edit
entry
Press
M
to open the
Phonebook
Menu
Return
to list
Entry’s speed
dial number
69
PRELIMINARY
Phonebook
Storing a Phonebook Entry
A phone number or email address is required for a
phonebook entry. All other information is optional.
Shortcut:
Enter a phone number in the idle display, then
press
STORE
(
+
) to create a phonebook entry with the
number in the
No.
field. Go directly to step 3 to continue.
Enter Information
Find the Feature
M
>
Phonebook
M
>
New
Press To
1
S
scroll to
Phone Number
or
Email Address
2
SELECT
(
+
) select the entry type
3
CHANGE
(
+
)select
Name
4
keypad keys enter a name for the entry
5
OK
(
+
) store the name
6
CHANGE
(
+
)select
No.
or
Email
7
keypad keys enter the phone number or
email address
Tip:
You can store a PIN
code with the phone number.
See page 71.
8
OK
(
+
) store the phone number or
email address
Phonebook
70
PRELIMINARY
9
CHANGE
(
+
) select
Type
Note:
This option is not
available for email entries.
10
S
scroll to the number type
11
SELECT
(
+
) select the number type
12
RECORD
(
+
)
or
Go to step 13 if
you do not want
a voice name
record a voice name for the
entry, if desired
13
S
scroll to
Speed No.
The next available speed dial
number is assigned to a new
phonebook entry.
14
CHANGE
(
+
) select
Speed No.
if you want
to change it
15
keypad keys enter a different speed dial
number, if desired
16
OK
(
+
) store the speed dial number
17
CHANGE
(
+
) select
Ringer ID
if you want to
assign a distinctive ringer
alert for the phone number
Your phone uses the alert to
notify you when you receive a
call from this phone number.
See page 111.
Press To
71
PRELIMINARY
Phonebook
Complete Phonebook Entry
When you are finished entering information for a
phonebook entry:
Storing a PIN Code With the
Phone Number
You can store a PIN code with the phone number for
calls that require additional digits (for example, to make
a calling card call, or to retrieve voicemail or answering
machine messages). Insert one or more of the following
18
S
scroll to the alert you want
19
SELECT
(
+
) store the ringer ID alert
20
SELECT
(
+
)select
MORE
if you want to
create another entry under
the same
Name
You must use a different
Type
identifier for each number.
Press To
DONE
(
-
) store the entry
Press To
Phonebook
72
PRELIMINARY
characters in the dialing sequence to ensure that the
number dials and connects properly:
Note:
You can store a maximum of 32 digits per number.
Each character counts as one digit.
Press To
M
>
Insert Pause
insert a
p
(pause) character
Your phone dials the
preceding digits, waits for the
call to connect, then sends
the remaining digit(s).
M
>
Insert Wait
insert a
w
(wait) character
Your phone dials the
preceding digits, waits for the
call to connect, then prompts
you for confirmation before it
sends the remaining digit(s).
M
>
Insert 'n'
insert an
n
(number)
character
Your phone prompts you for a
number before dialing the
call. The number you enter is
inserted into the dialing
sequence in place of the
n
character
73
PRELIMINARY
Phonebook
Recording a Voice Name For a
Phonebook Entry
You can record a voice name for a new or existing
phonebook entry. A voice name lets you call the
phonebook entry using voice dial (see page 74).
Tip:
Make your recording in a quiet location. Hold the
phone about four inches (10 centimeters) from your
mouth, and speak directly into the phone in a normal tone
of voice.
Find the Feature
M
>
Phonebook
Do This To
1
Press
S
scroll to the entry
2
Press
VIEW
(
+
) view entry details
3
Press
EDIT
(
+
) edit the entry
4
Press
S
scroll to
Voice Name
5
Press
RECORD
(
+
) begin recording
6
Press and release
the voice key and say
the entry’s name (in
two seconds)
record the voice name
7
Press and release
the voice key and
repeat the name
confirm the voice name
8
Press
DONE
(
-
) store the voice name
Phonebook
74
PRELIMINARY
Dialing a Phonebook Entry
Use one of the following procedures to call a number (or
send a text message to an email address) stored in your
phonebook.
Phonebook List
Voice Dial
To speed dial a phonebook entry, see page 33. To call an
entry with one-touch dial, see page 33.
Find the Feature
M
>
Phonebook
Press To
1
keypad key letter jump to entries that begin
with that letter (optional)
2
S
scroll to the entry
3
N
make the call
Do This To
Press and release
the voice key and
say the entry’s name
(in two seconds).
make the call
75
PRELIMINARY
Phonebook
Editing a Phonebook Entry
Edit the entry as described on pages 69-71.
Deleting a Phonebook Entry
Sorting the Phonebook List
You can sort your phonebook list by speed dial number
(the standard), name, email address, or voice name.
Note:
The voice name sort is identical to the name sort,
except that entries with voice name tags appear first.
Find the Feature
M
>
Phonebook
Press To
1
S
scroll to the entry
2
VIEW
(
+
) view entry details
3
EDIT
(
+
) edit the entry
Find the Feature
M
>
Phonebook
Press To
1
S
scroll to the entry
2
M
open the
Phonebook Menu
3
S
scroll to
Delete
4
SELECT
(
+
)select
Delete
5
YES
(
-
) confirm the deletion
Find the Feature
M
>
Phonebook
Phonebook
76
PRELIMINARY
Synchronizing with TrueSync
Software
You can synchronize phonebook entries between
your phone and computer or hand-held device with
Starfish TrueSync
®
software, a Motorola
accessory product. See the TrueSync user guide
for more information.
Note:
TrueSync software is designed to synchronize
with basic features of many popular Personal
Information Management (PIM) software and hardware
products.
Press To
1
M
open the
Phonebook Menu
2
S
scroll to
Setup
3
SELECT
(
+
) select
Setup
4
S
scroll to
Sort by
5
CHANGE
(
+
) select
Sort by
6
S
scroll to
Name
,
Speed No.
,
Voice Name
, or
Email
7
SELECT
(
+
) select the sort order
77
PRELIMINARY
Picture Viewer
Picture Viewer
Your phone contains pictures and animations
that you can insert into text messages, and use
as screen saver images.
The
Picture Viewer
menu can include the following
options:
Find the Feature
M
>
Picture Viewer
Press To
1
S
scroll to the picture
2
SELECT
(
+
) view the picture
3
*
or
#
or
DETAILS
(
+
)
or
M
view the previous/next picture
view picture information
open the
Picture Viewer
menu to perform other
procedures as described in
the following list
Option Description
Details
View picture information.
79
PRELIMINARY
Datebook
Datebook
The datebook is a calendar that lets you schedule and
organize events such as appointments and meetings. You
can set the datebook to send a reminder alarm for specific
events.
Note:
You must set the correct time and date on your
phone to use the datebook.
To schedule or review datebook events:
Week View
The datebook initially displays a calendar for the week.
Lines or filled boxes indicate scheduled events.
Find the Feature
M
>
Datebook
EXIT VIEW
{15 NOV-21 NOV }
Go to
selected day
Exit the
datebook
Untimed
event
12 hour
window One-hour event
Days of week
(press
*
or
#
to select)
Full day (12-hour)
event scheduled
SMTWTFS
Press
M
to open
the
Datebook Menu
M
80
PRELIMINARY
Datebook
Day View
Select a day and press
VIEW
(
+
) to see the day’s
events.
Event View
Select an event and press
VIEW
(
+
) to see event details.
{THU 19-NOV }
• Joe's B-day
9:00 A Marie,...
BACK VIEW
Day of week
Show event
details
Return to
previous screen
Untimed
event
Event
Reminder
alarm
Down scroll
arrow
Press
M
to open
the
Datebook Menu
M
A THU 9:00am
Marie, mtg about
new product
BACK EDIT
Day and time
Edit event
Return to
previous screen
Event details
Reminder
alarm
Down scroll
arrow
Press
M
to open
the
Datebook Menu
M
81
PRELIMINARY
Datebook
Adding a Datebook Event
A title is required for a datebook event. All other
information is optional.
Note:
You must create an event to use the reminder
alarm.
Changing Event Information
Find the Feature
M
>
Datebook
> day
M
>
New
Press To
1
CHANGE
(
+
)select
Title
2
keypad keys enter a title for the event
3
OK
(
+
) store the event title
4
S
scroll to other fields and enter
information as necessary
You can set start time,
duration, date, repeat
interval, and reminder alarm.
5
DONE
(
-
) store the event
Find the Feature
M
>
Datebook
Press To
1
*
or
#
scroll to the day
2
VIEW
(
+
) display the day view
3
S
scroll to the event
4
VIEW
(
+
) display the event view
82
PRELIMINARY
Datebook
Copying an Event
5
EDIT
(
+
) edit the event
6
S
scroll to the information you
want to change
7
CHANGE
(
+
) edit the information
8
keypad keys enter new information
9
DONE
(
-
) store the information
Find the Feature
M
>
Datebook
Press To
1
*
or
#
scroll to the day
2
VIEW
(
+
) display the day view
3
S
scroll to the event
4
M
open the
Datebook Menu
5
S
scroll to
Copy
6
SELECT
(
+
) copy the event
7
YES
(
-
) confirm the copy
Your phone assumes you
want to change the date, and
displays the
Date
field.
8
keypad keys enter date information
9
}
(
+
)move to month, day, and year
10
DONE
(
-
) save the copy of the event
11
S
scroll to and edit event
information, if necessary
Press To
83
PRELIMINARY
Datebook
Deleting an Event
Alarm Clock
Your phone includes an alarm clock that you set and
activate from the datebook week view or day view.
Notes:
•
The alarm clock setting does not appear in the
datebook day view, and is not synchronized with
datebook settings
•
Your phone must be turned on to use the alarm
12
DONE
(
-
) store the information
Find the Feature
M
>
Datebook
Press To
1
*
or
#
scroll to the day
2
VIEW
(
+
) display the day view
3
S
scroll to the event
4
M
open the
Datebook Menu
5
S
scroll to
Delete
6
SELECT
(
+
)select
Delete
7
YES
(
-
) confirm the deletion
Press To
84
PRELIMINARY
Datebook
Set the Alarm
Turn Off the Alarm
When the alarm is activated, your phone rings or vibrates
(depending on the alarm setting for the current ring style),
and displays the time and alarm title.
Find the Feature
M
>
Datebook
M
>
Alarm Clock
Press To
1
SELECT
(
+
) edit the alarm settings
2
CHANGE
(
+
)select
Start
3
keypad keys enter the alarm activation
time
4
DONE
(
-
) store the time
5
S
scroll to other fields and enter
information as necessary
You can set date, title, repeat
interval, and an alarm clock
indicator.
6
CHANGE
(
+
)select
Ringer
7
S
scroll to
On
to set the ringer or
Off
to turn off the ringer
8
DONE
(
-
) store the alarm setting
85
PRELIMINARY
Datebook
The alarm is programmed to ring for 30 minutes, or until
you perform one of the following operations.
Press To
EXIT
(
-
) or
O
turn off the alarm
DELAY
(
+
) turn off the alarm for 8
minutes
The alarm is reactivated at
the end of 8 minutes.
86
PRELIMINARY
Radio
Radio
You can use your phone to listen to FM radio
stations when the optional Motorola Original™
FM Stereo Radio Headset accessory is
plugged into the phone’s accessory connector
port.
Turning the Radio On and Off
Alternatively, you can use the following procedure:
Note:
The
Radio
menu feature and soft key options appear
only when the FM Stereo Radio Headset is plugged into
the accessory connector port.
Press To
Radio
(
+
) turn the radio on and off
Find the Feature
M
>
Radio
>
On
or
Off
Press To
1
M
open the menu
2
S
scroll to
Radio
3
On
(
+
) or
Off
(
+
)
turn the radio on or off
87
PRELIMINARY
Radio
Tuning a Station
Storing a Preset
Selecting a Preset
Sending and Receiving Calls
With the Radio On
Your phone rings or vibrates as usual to notify you of an
incoming call, message, or other event.
Do This To
Press
S
or
Press and hold
S
scroll to the next frequency
scroll to the next available
stereo station
Do This To
Press and hold a
number key
(
1
to
9
)
assign its preset number to
the tuned station
Press To
a number key
(
1
to
9
)
tune the station stored at the
preset location
88
PRELIMINARY
Radio
To end the call and resume the FM broadcast:
Turn the radio off before dialing outgoing calls from the
phone keypad. You do not have to turn off the radio to dial
emergency numbers, or numbers selected from your
phonebook or recent call lists.
Tip:
To dial a recently called number, press
N
or the button
on the FM Stereo Radio Headset microphone to go to the
dialed calls list. For more information, see page 64.
Do This To
Press
IGNORE
(
-
) ignore the call
Press
ANSWER
(
+
)
or
Press the button on the
FM Stereo Radio
Headset microphone
answer the call
Note:
You can use the
FM Stereo Radio
Headset microphone to
converse with the other
party during a call
Do This To
Press
O
or
Press and hold the
button on the FM Stereo
Radio Headset
microphone
end the call
89
PRELIMINARY
Messages—Voicemail
Messages—Voicemail
You can listen to your voicemail messages by
calling your network voicemail phone number.
Voicemail messages are stored on the
network—not on your phone.
Storing Your Voicemail
Number
Storing your voicemail number on your phone makes it
easy for you to listen to new voicemail messages. In many
cases, your service provider has already done this for you.
Your service provider additionally may store your voicemail
number as phonebook entry number 1, so you can use
one-touch dial to listen to your voicemail messages. If
necessary, see page 69 to store your voicemail number for
one-touch dial access.
Find the Feature
M
>
Messages
M
>
VoiceMail Setup
Press To
1
keypad keys enter your voicemail number
Tip:
You can store your PIN
code with the voicemail
number. See page 71.
2
OK
(
+
) store the number
90
PRELIMINARY
Messages—Voicemail
Receiving a Voicemail Message
When you receive a voicemail message, your phone
displays the
&
(voice message waiting) indicator and a
New VoiceMail
notification.
If reminders are turned on, your phone sends a
reminder at intervals until you close the new message
notification, listen to the message, or turn off your
phone.
Listening to a Voicemail
Message
The phone calls your voicemail number. If no voicemail
number is stored, your phone prompts you to store one.
Shortcut:
If your voicemail number is also stored as
phonebook entry number 1, you can press and hold
1
to
listen to your voicemail message(s).
Turning Off the Voice Message
Waiting Indicator
To clear the
&
(voice message waiting) indicator:
Press To
CALL
(
+
) listen to the message
Find the Feature
M
>
Messages
>
VoiceMail
Find the Feature
M
>
Messages
M
>
Clear Count
91
PRELIMINARY
Messages—Text
Messages—Text
Text messages are brief messages that you can
send and receive.
Quick notes are pre-written text messages that
you can incorporate into a message and send
quickly.
Your text message inbox must be set up before you can
send and receive messages. The number of messages the
inbox can hold depends on the length of the messages,
and the number of other messages and drafts stored on
your phone.
Setting Up the Text Message
Inbox
Note:
In many cases, your service provider has already
set up the text message inbox for you.
Find the Feature
M
>
Messages
M
>
Inbox Setup
Press To
1
CHANGE
(
+
) change the
Cleanup
setting
2
S
scroll to the number of days
you want to keep messages
in the inbox, or the number of
messages you want to keep
3
SELECT
(
+
) select the cleanup setting
4
DONE
(
-
) save the inbox settings
92
PRELIMINARY
Messages—Text
Receiving a Text Message
Note:
Your text message inbox must be set up before you
can receive text messages. See page 91.
When you receive a text message, your phone displays
the
X
(message waiting) indicator and a
New Inbox Message
notification, and gives an alert.If you
receive a downloaded picture, your phone displays
1 New Picture Received
, and you can store or delete the
picure.
If reminders are turned on, your phone sends a
reminder at regular intervals until you close the new
message notification, read the message, or turn off
your phone.
When your phone displays
Memory is Full!
, you must
delete some existing messages to receive new messages.
Reading, Locking, or Deleting a
Text Message
Messages in the text message inbox are sorted from
newest to oldest. The oldest messages are deleted
automatically as specified by the inbox cleanup setting
(see page 91). If you want to save a message, you should
lock it to prevent it from being deleted during cleanup.
Press To
READ
(
+
) open the message
Find the Feature
M
>
Messages
>
Inbox
93
PRELIMINARY
Messages—Text
The
Inbox Menu
can include the following options:
Press To
1
S
scroll to the message
The following indicators show
message status:
Y
= unread
ñ
=unread (with attachment)
d
= unread and urgent
ï
= unread and urgent
(with attachment)
n
= read
î
= read (with attachment)
f
= read and locked
ó
=read
and locked
(with attachment)
2
READ
(
+
) open the message
3
BACK
(
-
)
or
DELETE
(
+
)
or
M
close the message
delete the message
open the
Inbox Menu
to perform
other procedures as described
in the following list
Option Description
Create Message
Open a new text message.
94
PRELIMINARY
Messages—Text
Storing Pictures, Animations,
and Sounds
Text messages that you receive can contain pictures,
animations, and sounds. Pictures and animations are
displayed as you read the message. A sound begins
Call Back
Call the number in the message
header or embedded in the
message.
Go To
Launch the micro-browser and go
to a Web address (URL)
embedded in the message.
Reply
Open a new text message, with
the sender’s
Reply To
number or
email address in the
To
field.
Forward
Open a copy of the text message,
with an empty
To
field.
Store
Display a list of items that can be
stored, including the sender’s
number or email address, and a
selected image or sound file.
Play
Play a sound file in the message.
Lock/Unlock
Lock or unlock the message.
Delete
Delete the message.
Delete All
Delete all inbox messages.
Inbox Setup
Open the text message inbox
setup menu.
Option Description
95
PRELIMINARY
Messages—Text
playing when you select the
ê
(sound file) indicator.You
can store these embedded object files on your phone, and
use them as screen saver images and alert tones.
Store a Picture or Animation File
For more information about using pictures and animations,
see pages 77, and 138.
Press To
1
S
highlight the picture or
animation in the message
2
M
open the
Text Msg Menu
3
S
scroll to
Store
4
SELECT
(
+
) display a list of items you can
store
5
S
scroll to
File Attachment
6
SELECT
(
+
) display the file name
1
STORE
(
+
) view storage options
2
S
scroll to
Store Only
, or
Set as Screen Saver
3
SELECT
(
+
) store the file and, optionally,
set it as your screen saver
image
96
PRELIMINARY
Messages—Text
Store a Sound File
You can store a sound file, and set it as an event alert.
Press To
1
S
highlight the
ê
(sound file)
indicator in the message
2
M
open the
Text Msg Menu
3
S
scroll to
Store
4
SELECT
(
+
) display a list of items you can
store
5
S
scroll to
File Attachment
6
SELECT
(
+
) display the file name
7
STORE
(
+
) view storage options
8
S
scroll to
Store Only
or
Set As Ring Tone
9
SELECT
(
+
) select the option
If you select
Store Only
, the
procedure is complete.
If you select
SetAsRing
Tone
, your phone displays
Set As Which?
, and lists the
events for which you can set
an alert.
10
S
scroll to the event
11
SELECT
(
+
) store the sound and set it as
the event alert
97
PRELIMINARY
Messages—Text
For more information about using sound files, see
pages 110 and 112.
Reading Browser Alerts
Your network’s Web server can send you
browser alerts that you can read in your
micro-browser.
When you receive a browser alert message,
your phone displays the
X
(message waiting) indicator
and a
New Browser Message
notification, and gives an
alert.
To view your browser alert messages at any time:
Press To
GO TO
(
+
)
or
EXIT
(
-
)
launch the micro-browser and
view the message
close the new message
notification
Find the Feature
M
>
More
>
Messages
>
Browser Alerts
Press To
1
S
scroll to a message
2
SELECT
(
+
) open the message
98
PRELIMINARY
Messages—Text
Reading Information Service
Messages
Information service messages are broadcast
messages that you can receive, such as stock
updates or news headlines.
Your information services message inbox must
be set up before you can receive information services
messages. The number of messages the inbox can hold
depends on the length of the messages, and the number
of other messages and drafts stored on your phone.
Set Up the Information Services Message
Inbox
Note:
In many cases, your service provider has
already set up the information services message inbox
for you.
Find the Feature
M
>
More
>
Messages
M
>
Info Srvc Setup
Press To
1
CHANGE
(
+
) change the
Service
setting
2
S
scroll to the
Yes
or
No
to turn
cell broadcasts on or off
Note:
Your phone may
provide an additional
Browser Services
option on
this menu. See page 131.
3
SELECT
(
+
) select the service setting
99
PRELIMINARY
Messages—Text
4
SELECT
(
+
) select
Active Channels
to set
the subscription channels
5
S
scroll to an active channel
that you want to disable, or
scroll to
[New Channel]
to
add a new channel
6
BACK
(
-
) return to the cell broadcast
menu when you are finished
setting subscription channels
7
CHANGE
(
+
) change the
Quick View
channel
8
keypad keys enter the quick view channel
number
9
OK
(
+
) store the quick view channel
number
10
CHANGE
(
+
) change the
Save Q.View
setting
11
S
scroll to
Yes
or
No
to set
whether you want to save
single-line quick view
messages in the inbox
12
SELECT
(
+
) store the save setting
13
CHANGE
(
+
) change the
Cleanup
setting
14
S
scroll to the number of days
you want to keep messages
in the inbox, or the number of
messages you want to keep
Press To
100
PRELIMINARY
Messages—Text
Receive an Information Services Message
Note:
Your information services message inbox must be
set up before you can receive information services
messages. See page 98.
When you receive a lengthy information services
message, your phone displays the
X
(message waiting)
indicator and a
New Message
notification, and gives an
alert.
If the new message is a short quick view message, it
appears directly in your display. See page 102.
If reminders are turned on, your phone sends a reminder
at regular intervals until you close the new message
notification, read the message, or turn off your phone.
When your phone displays
Memory is Full!
, you must
delete some existing messages from your inbox, outbox,
or drafts folder to receive new messages.
15
DONE
(
-
) save the information services
message inbox settings
Press To
READ
(
+
) open the message (or your
information services
message inbox if there are
multiple messages)
Press To
101
PRELIMINARY
Messages—Text
Read, Lock, or Delete an Information
Services Message
Messages in the information services message inbox are
sorted from newest to oldest. The oldest messages are
deleted automatically as specified by the inbox cleanup
setting (see page 98). If you want to save a message, you
should lock it to prevent it from being deleted during
cleanup
Press To
1
S
scroll to the message
The following indicators show
message status:
Y
= unread
n
=read
f
= read and locked
2
READ
(
+
) open the message
3
SAVE
(
-
)
or
DELETE
(
+
)
or
M
close the message
delete the message
open the
Info Srvc Menu
to
perform other procedures as
described in the following list
102
PRELIMINARY
Messages—Text
The
Info Srvc Menu
can include the following options:
Read and Save a Quick View Message
Quick view messages are short information service
messages that appear directly in your phone’s idle display.
Option Description
Call Back
Call the number in the message
header or embedded in the
message.
Go To
Launch the micro-browser and go
to a Web address (URL)
embedded in the message.
Forward
Open a copy of the message, with
an empty
To
field.
Lock/Unlock
Lock or unlock the message.
Store Number
Open a new phonebook entry with
the message’s embedded number
in the
No.
field.
Delete
Delete the message
Delete All
Delete all inbox messages
Store Address
Open a new phonebook entry with
the message’s embedded email
address in the
Email
field.
Setup
Open the information services
message inbox setup menu
103
PRELIMINARY
Messages—Text
Your phone alerts you when you receive a new quick view
message.
If the message is more than two lines, you can press
Save
(
-
) to save it in your information services inbox.
To automatically save quick view messages, see page 98.
Note:
Broadcast or browser services send quick view
messages on quick view channels. To set up a quick view
channel, see page 98.
Sending a Text Message
You can send a text message to one or more
recipients. You can manually enter each recipient’s
phone number or email address, or select numbers/
addresses from the phonebook or recent call lists.
Note:
When you manually enter numbers and/or email
addresses, you must insert a space between each entry.
Press
1
one time, wait for the space to appear, then
enter the next number or email address.
Do This To
Read the message
and press
O
read and delete the quick
view message
Find the Feature
M
>
Messages
>
Create Message
Press To
1
CHANGE
(
+
) select
To
104
PRELIMINARY
Messages—Text
2
keypad keys
or
BROWSE
(
+
)
a
S
b
SELECT
(
+
)
c
S
d
ADD
(
+
)
e
DONE
(
-
)
enter one or more phone
numbers and/or email
addresses
Tip:
Press
1
to insert a
space between each
number/address that you
enter manually.
select numbers/addresses
from the phonebook or recent
call lists as follows:
highlight
Phonebook
,
Received
Calls
, or
Dialed Calls
select the list
highlight a number/address
add the number/address to
the list of message recipients
return to the message editor
when you are finished
3
OK
(
+
) store the numbers/addresses
4
CHANGE
(
+
) select
Msg
Press To
105
PRELIMINARY
Messages—Text
5
keypad keys
or
BROWSE
(
+
)
enter the message
Note:
Message length is
limited. As you near the limit,
a display counter shows how
many characters are left.
select and insert a quick note
message (see page 106)
6
keypad keys
or
BROWSE
(
+
)
enter the message
Note:
Message length is
limited. A display counter
cycles between the number
of pages you have written
(number preceded by a
*
),
and the number of characters
left on the current page.
Network charges are based
on the number of pages sent.
select and insert a quick note
message (see page 106)
7
OK
(
+
)store the message
8
CHANGE
(
+
) select
Priority
9
S
scroll to the priority you want
10
SELECT
(
+
) set the priority
11
CHANGE
(
+
) select
Call
Press To
106
PRELIMINARY
Messages—Text
Sending a Quick Note Text
Message
Quick notes are pre-written text messages that you can
incorporate into a message and send quickly (for example,
Meet me at ...
). You can also create new quick notes.
12
keypad keys enter a number for the
recipient to call back
13
OK
(
+
) store the number
14
DONE
(
-
) finish the messageYour
phone displays the total
pages in the message.
15
YES
(
-
)
or
NO
(
+
)
send the message
cancel the message or save it
in the drafts folder
Find the Feature
M
>
Messages
>
Quick Notes
Press To
1
S
scroll to the quick note
2
READ
(
+
)
or
M
read the quick note
open the
Quick Note Menu
to
perform other procedures as
described in the following list
Press To
107
PRELIMINARY
Messages—Text
The
Quick Note Menu
can include the following options:
Inserting Pictures, Animations,
and Sounds
You can insert pictures, animations, and sounds into a text
message as you compose it.
Insert a Picture or Sound File
Enter your message as usual. When you come to a
spot where you want to insert a picture or sound file:
Option Description
New
Create a new quick note.
Edit
Edit the quick note.
Delete
Delete the quick note.
Send
Open a new message with the
quick note in the
Msg
field.
Press To
1
M
open the
Message Menu
2
S
scroll to
Insert
3
SELECT
(
+
) display a list of items you can
insert
4
S
scroll to
Picture
,
Animation
, or
Sound
5
SELECT
(
+
) select the file type
6
S
highlight the file you want
108
PRELIMINARY
Messages—Text
Notes:
Inserted animations or graphics appear in the
message, while sound files are represented by a
ê
.
•
Your phone may allow only predefined images and
sounds in a message. These files are identified by a
ë
(predefined object) indicator.
•
You can insert up to fifteen pictures in a message
View or Delete an Inserted File
7
VIEW
(
+
) or
PLAY
(
+
)
preview the file
8
INSERT
(
+
) insert the file
Press To
1
S
place the cursor to the right of
the file type indicator
2
S
highlight the file type indicator
3
SELECT
(
+
)
or
DELETE
(
-
)
view or play the inserted file
delete the inserted file
Press To
109
PRELIMINARY
Messages—Text
Viewing the Status of Sent
Text Messages
Messages that you send are stored in the outbox.
Messages in the outbox are sorted from newest to oldest.
The following indicators show message status:
Find the Feature
M
>
Messages
>
Outbox
á
= sending in progress
Y
= sent
m
= sending failed
110
PRELIMINARY
Ring Styles
Ring Styles
Your phone rings or vibrates to notify you of an incoming
call or other event. This ring or vibration is called an alert.
You can select one of five different ring styles:
The ring style indicator in the display shows the current
ring style (see page 23).
Each ring style contains settings for specific event
alertsringer ID, and ringer and keypad volume.
Selecting a Ring Style
Customizing a Ring Style
Change Style Settings
You can change the alerts that notify you of the following
events: incoming calls, text messages, voicemail
w
= loud ring
x
= soft ring
y
=vibrate
u
= vibrate and ring
t
= silent
Find the Feature
M
>
Settings
>
Ring Styles
>
Style
Press To
1
S
scroll to the ring style
2
SELECT
(
+
) select the ring style
111
PRELIMINARY
Ring Styles
messages, data calls, fax calls, alarms, and reminders.
Any changes you make are saved to the current ring style.
Note:
Style represents the current ring style.
Activate and Deactivate Ringer IDs
When ringer IDs are turned on, your phone uses distinctive
ringer alerts to notify you of incoming calls or messages
from specific entries stored in your phonebook. To assign
a ringer ID to a phonebook entry, see page 69.
Note:
Style represents the current ring style.
Find the Feature
M
>
Settings
>
Ring Styles
>Style
Detail
Press To
1
S
scroll to the event
2
CHANGE
(
+
) select the event
3
S
scroll to the alert you want
4
SELECT
(
+
) select the alert
Find the Feature
M
>
Settings
>
Ring Styles
>Style
Detail
112
PRELIMINARY
Ring Styles
Set Ringer or Keypad Volume
Note:
Style represents the current ring style.
Creating Alert Tones
You can create and store custom alert tones on your
phone. The tones appear in the list of available alerts.
Create a Tone
Find the Feature
M
>
Settings
>
Ring Styles
>Style
Detail
Press To
1
S
scroll to
Ring Volume
or
Key Volume
2
*
or
#
scroll to the desired volume
3
OK
(
+
) confirm the new volume
Find the Feature
M
>
Settings
>
Ring Styles
>
My Tones
Press To
1
S
scroll to
[New Tone]
2
SELECT
(
+
) select
[New Tone]
3
CHANGE
(
+
) select
Notes
4
keypad keys enter notes (see page 113)
5
OK
(
+
) store the notes
6
CHANGE
(
+
) select
Name
113
PRELIMINARY
Ring Styles
Enter Notes
Use the keypad keys to enter each note. Press a key
multiple times to cycle through its notes or options (pitch,
octave, or length). The default setting for a new tone is a
quarter note in octave two.
7
keypad keys enter a name for the tone
8
OK
(
+
) store the name
9
DONE
(
-
) store the tone
Key Display Description
1
1
set octave one
2
set octave two
3
set octave three
2
A
note A
B
note B
C
note C
3
D
note D
E
note E
F
note F
4
G
note G
R
rest
7
#
sharp
b
flat
Press To
114
PRELIMINARY
Ring Styles
Enter a note as follows:
0
q
quarter note or rest
h
half note or rest
w
whole note or rest
Task Action
Change the
octave
Set the new octave (
1
,
2
, or
3
)
before selecting the note. The
octave applies to all following
notes until you change it again.
Select the note
(required)
Press a keypad key.
Change a note
to a sharp or
flat
Enter a sharp or flat (
#
or
b
) after
selecting the note.
Some sharps and flats are played
as standard notes. For example,
B#
is the same as
C
. Press to scroll
to valid notes when entering a
new note.
Change a
note’s length
Set the new length (
q
,
h
, or
w
)
after selecting the note. The
length applies to all following
notes until you change it again.
Key Display Description
115
PRELIMINARY
Ring Styles
Example
Press the following keys to play this sequence of notes
and rests in octave three:
C
(quarter note),
E flat
(quarter
note),
half rest
, and
G
(whole note):
Add a rest Enter one or more rests (
R
characters) as needed in the tone
sequence. Set the length of the
rest by entering a
q
,
h
, or
w
character after the rest, just as
you would for a note.
Listen to a new
tone as you
compose it
Press
M
to enter the
Compose Menu
, and select
Play All
to play the notes you
have entered.
Press To Display
1
1
1
1
set octave
three
3
2
2
2
2
enter a
quarter note
C
C
3
3
3
7
7
enter a
quarter note
E flat
Eb
4
4
4
0
0
enter a
half
rest
Rh
Task Action
116
PRELIMINARY
Ring Styles
Play a Tone
Edit a Tone
You cannot edit the predefined alert tones included
with your phone. To edit a custom alert tone:
5
4
0
0
0
enter a whole
note
G
Gw
Find the Feature
M
>
Settings
>
Ring Styles
>
My Tones
Press To
1
S
scroll to the tone
2
M
open the
My Tones Menu
3
S
scroll to
Play
4
SELECT
(
+
) select
Play
5
PLAY
(
+
)
or
CANCEL
(
-
)
play the tone again
return to my tones list
Find the Feature
M
>
Settings
>
Ring Styles
>
My Tones
Press To
1
S
scroll to the tone
2
EDIT
(
+
) open the tone details
Press To Display
117
PRELIMINARY
Ring Styles
Delete a Tone
You cannot delete the predefined alert tones included with
your phone. To delete a custom alert tone:
Send and Receive Tones
You can send and receive ring tones attached to text
messages. To insert a tone in a text message, see
page 107. To download a tone from a text message, see
page 94.
3
S
scroll to the item you want to
edit (
Name
or
Notes
)
4
CHANGE
(
+
) select the item
5
keypad keys enter new text or notes
6
OK
(
+
) store the new text or notes
7
DONE
(
-
) save your changes
Find the Feature
M
>
Settings
>
Ring Styles
>
My Tones
Press To
1
S
scroll to the tone
2
M
open the
My Tones Menu
3
S
scroll to
Delete
4
SELECT
(
+
)select
Delete
5
YES
(
-
) confirm the deletion
Press To
118
PRELIMINARY
Ring Styles
Setting Reminders
A reminder is an alert that rings or vibrates at regular
intervals to notify you about a voicemail or text message
that you have received.
Note:
Style represents the current ring style.
Find the Feature
M
>
Settings
>
Ring Styles
>Style
Detail
>
Reminders
Press To
1
S
scroll to
Beep
or
Vibrate
to set
the reminder alert type, or
Off
to turn off all reminders
2
SELECT
(
+
) select the reminder alert
119
PRELIMINARY
Shortcuts
Shortcuts
Your phone includes several standard shortcuts. You can
create additional shortcuts to frequently used menu items.
Standard Shortcuts
The following shortcuts are pre-programmed in your
phone. You cannot edit or delete these shortcuts.
Creating a Shortcut
You can create a keypad shortcut plus an optional voice
shortcut to a menu item. A voice shortcut takes you
directly to the menu item when you say the shortcut name.
Tip:
Make your recording in a quiet location. Hold the
phone about four inches (10 centimeters) from your
Do This To
Press
M
, then
press and hold
M
(within two
seconds)
zoom in/out on your phone
display
Press
M#
see your phone number
Press
N
go to the dialed calls list
Press
O
exit the menu system
120
PRELIMINARY
Shortcuts
mouth, and speak directly into the phone in a normal tone
of voice.
Do This To
1
Press
M
enter the menu system
2
Press
S
scroll to the menu item
3
Press and hold
M
open the shortcut editor
4
Press
YES
(
-
) view shortcut options
5
Press
CHANGE
(
+
)
or
Press
DONE
(
-
)
or
Press
S
change the keypad
shortcut number
select the default keypad
shortcut number
scroll to
Voice
to assign a
voice shortcut
6
Press
RECORD
(
+
) begin recording
7
Press and release
the voice key and say
the shortcut’s name
(in two seconds)
record the shortcut name
8
Press and release
the voice key and
repeat the name
confirm the shortcut
name
9
Press
DONE
(
-
) store the shortcut name
121
PRELIMINARY
Shortcuts
Using Shortcuts
Use a Keypad Shortcut
Select a Shortcut From the List
Use a Voice Shortcut
Press To
1
M
open the main menu
2
a number key go to the menu item with
that shortcut number
Find the Feature
M
>
Shortcuts
>shortcut name
Do This To
1
Press
M
open the menu
2
Press and release
the voice key and say
the shortcut’s name
(in two seconds)
go to the menu item with
that shortcut name
122
PRELIMINARY
Voice Notes
Voice Notes
You can use the voice note feature to record personal
messages and phone calls on your phone.
Recording a Voice Note
Use this procedure to record a voice note from the idle
display, or to record a phone call in progress. Your phone
plays an alert tone to notify the other party that the call is
being recorded.
Note:
Recording phone calls is subject to varying state
and federal laws regarding privacy and recording of
conversations.
Tip:
Make your recording in a quiet location. Hold the
phone about four inches (10 centimeters) from your
mouth, and speak directly into the phone in a normal tone
of voice.
Do This Result
1
Press and hold the
voice key for the
duration of the
recording.
The phone sounds an
alert tone and begins
recording.
2
Speak your voice note. The phone records the
voice note.
3
Release the voice key
to stop recording.
The phone displays the
voice note number and
total recording time.
123
PRELIMINARY
Voice Notes
Viewing the Voice Notes List
Find the Feature
M
>
Voice Notes
Voice Notes
2)2:20pm 6/1/00
1)4:05am 4/1/00
EXIT PLAY
f
Press
M
to open the
Voice Notes Menu
Play the
highlighted
voice note
Return to
previous screen
Time/date
recorded
Down scroll
arrow
Locked
voice note
M
124
PRELIMINARY
Voice Notes
Playing a Voice Note
When you connect an optional Motorola Original™
headset or FM Stereo Radio Headset accessory to your
phone, playback is automatically routed to the headset.
Tip:
You can play a voice note while taking a call. It will not
be transmitted to the other party.
Playback Screen
The playback screen is displayed as the voice note plays.
Find the Feature
M
>
Voice Notes
Press To
1
S
scroll to the voice note
2
PLAY
(
+
) play the voice note
Erase
voice note
Return to
previous
screen
Voice note
number
Press
#
to
fast forward
Press
*
to rewind
Voice Note 3
{}
SAVE DELETE
Indicates
% played
Press
M
to open the
Voice Notes Menu
M
125
PRELIMINARY
Voice Notes
Voice Note Controls
Stop
playback and
return to voice
notes list.
Stop
playback and
go to
Voice
Notes Menu
.
Stop
playback and
scroll up/down
to next voice
note.
Rewind three
seconds,
resume
playing.
Press and hold
to rewind to the
beginning.
When playback is
complete, press to
restart.
Fast forward
three
seconds,
resume
playing.
Press any
number to
alternately
stop and
start
playback.
If voice note is
locked, stop
playback and
unlock voice
note.
Press and
hold to fast
forward to
end.
If voice note is
unlocked, stop
playback and
display
Delete
Voice Note?
Raise or lower
playback
volume of
voice note.
126
PRELIMINARY
Voice Notes
Locking and Unlocking a Voice
Note
Lock a voice note to prevent it from being deleted. You
must unlock a voice note to delete it.
To lock or unlock a voice note during playback:
Playback stops when you lock or unlock a voice note.
Press any number key to resume playback.
Find the Feature
M
>
Voice Notes
Press To
1
S
scroll to the voice note
2
M
open the
Voice Notes Menu
3
S
scroll to
Lock
or
Unlock
4
SELECT
(
+
) lock or unlock the voice note
Press To
1
M
open the
Voice Notes Menu
2
S
scroll to
Lock
or
Unlock
3
SELECT
(
+
) lock or unlock the voice note
127
PRELIMINARY
Voice Notes
Deleting a Voice Note
Notes:
•
You cannot delete a locked voice note.
•
You cannot recover a deleted voice note.
Find the Feature
M
>
Voice Notes
Press To
1
S
scroll to the voice note
2
M
open the
Voice Notes Menu
3
S
scroll to
Delete
or
Delete All
4
SELECT
(
+
) select the highlighted option
5
YES
(
-
)
or
NO
(
+
)
confirm the deletion
cancel deletion
128
PRELIMINARY
Micro-Browser
Micro-Browser
The micro-browser lets you access
Web pages and Web-based
applications on your phone. Contact
your service provider to set up access,
if necessary.
Starting a Micro-Browser
Session
Shortcut:
If you open a text message with a Web address
(URL) embedded in it, you can press
M
>
Go To
to
launch the micro-browser and go directly to the URL.
If you are unable to establish a network connection with
the micro-browser, contact your service provider.
Find the Feature
M
>
Browser
Find the Feature
M
>
Browser
Press To
1
S
scroll to a bookmark, service,
or application
2
SELECT
(
+
) select the item
129
PRELIMINARY
Micro-Browser
Interacting With Web Pages
Downloading Pictures,
Animations, and Sounds
You can download a picture, animation, or sound from a
Web page by selecting its link. A picture or animation is
displayed when downloading is complete. A sound begins
to play when downloading is complete.
You can store these object files on your phone, and use
them as screen saver images and alert tones.
Press To
S
scroll through text, or
highlight a selectable item
SELECT
(
+
) select the highlighted item
N
call the highlighted phone
number from the
micro-browser
keypad keys,
followed by
OK
(
+
)
enter information
Tip:
Press
DELETE
(
*
) to
delete one letter at a time if
you make a mistake.
BACK
(
*
) go back to the previous page
M
open the
Browser Menu
130
PRELIMINARY
Micro-Browser
Store a Picture or Animation File
For more information about using pictures and
animations, see pages 77 and 138.
Store a Sound File
You can store a sound file, and set it as an event alert.
Press To
1
STORE
(
+
) view storage options
2
S
scroll to
Store Only
, or
Set as Screen Saver
3
SELECT
(
+
) store the file and, optionally,
set it as your screen saver
image
Press To
1
STORE
(
+
) view storage options
2
S
scroll to
Store Only
or
Set As Ring Tone
3
SELECT
(
+
) select the option
If you select
Store Only
, the
procedure is complete.
If you select
Set As Ring
Tone
, your phone displays
Set As Which?
, and lists the
events for which you can set
an alert.
4
S
scroll to the event
131
PRELIMINARY
Micro-Browser
For more information about using sound files, see
pages 110 and 112.
Running the Micro-Browser in
the Background
Some phones are set up to run a micro-browser
session in the background when the phone registers
with a network. This allows your phone to display
information services messages delivered to your phone by
your service provider (such as stock updates, news
updates, or sports scores). These types of services
typically are available through subscription from your
service provider.
Turn a Background Micro-Browser Session
On or Off
5
SELECT
(
+
) store the sound and set it as
the event alert
Find the Feature
M
>
More
>
Messages
M
>
Info Srvc Setup
>
Browser Services
Press To
1
S
toggle the background
micro-browser setting to
On
or
Off
2
SELECT
(
+
) select the new setting
Press To
132
PRELIMINARY
Calculator
Calculator
You can use your phone as a calculator and currency
converter.
Calculating Numbers
Find the Feature
M
>
Calculator
Press To
1
number keys enter a number
2
*
or
#
highlight a calculator function
3
SELECT
(
+
) perform the function
Calculator
+0
EXIT SELECT
Selected
function
appears
here
Perform the
highlighted
function
Press
M
to open
the
Calculator Menu
Exit the
calculator
Entered
number
Press
*
or
#
to scroll
to other
functions
Press
*
or
#
to highlight
a function
. ÷C = +-x}
M
133
PRELIMINARY
Calculator
The calculator can perform the following functions:
Function Description
.
Insert a decimal point
C
Clear the calculation
CE
Clear entry (replaces
C
when you enter
subsequent values in a calculation)
=
Calculate the result
+
Add
-
Subtract
x
Multiply
÷
Divide
%
Divide the displayed value by 100
±
Change the entry’s sign
(positive/negative)
$
Calculate the exchange rate
MS
Store the value in memory (overwrites
current stored value)
MC
Clear the value stored in memory
MR
Replace the displayed value with the
value stored in memory
134
PRELIMINARY
Calculator
Converting Currency
The currency converter works just like the calculator, but
uses the
$
(currency) function:
Find the Feature
M
>
Calculator
M
>
Exchange Rate
Press To
1
number keys enter the exchange rate
2
OK
(
+
) store the exchange rate
3
number keys enter the amount to convert
(amount to multiply by the
exchange rate)
4
*
or
#
highlight the
$
function
5
SELECT
(
+
) perform the conversion
135
PRELIMINARY
Get It Now
A
7
A
Get It Now
Your phone may contain additional applications
that add features and functionality to your phone
by downloading them. Downloaded games and
applications are stored in the
GetItNow
folder
on your phone.
Launching an Application
Editing Network Connection
Settings
Your phone must be set up with a valid domain name
service (DNS) IP address and a Server IP address before
you can run applications that require an active network
connection. In many cases, your service provider has
already entered these addresses for you. Contact your
service provider to obtain the addresses, if necessary.
Find the Feature
M
>
Get It Now
Press To
1
S
scroll to the application
2
SELECT
(
+
) launch the application, or
open the list of applications in
a suite
3
S
scroll to the application you
want, if necessary
4
SELECT
(
+
) launch the application
136
PRELIMINARY
Get It Now
A
7
A
Using Control Keys
Your phone’s keys perform the following functions in a
application.
Analyzing or Deleting an
Application
You can choose to analyze or delete the application.
Key Function
S
Move up, down, left, or right in a game.
O
End the application.
Find the Feature
M
>
Get It Now
>
Options
> application
137
PRELIMINARY
Adjusting Your Settings
Adjusting Your
Settings
Reordering Menu Items
You can reorder the items in your phone’s main menu.
Customizing a Soft Key
Function
You can relabel the soft keys (
-
and
+
) and the
smart key to access different menu items from the idle
display.
Find the Feature
M
>
Settings
>
Other Settings
>
Personalize
>
Main Menu
Press To
1
S
scroll to a menu item
2
GRAB
(
+
) grab the menu item
3
S
move the item to a new
location in the menu
4
INSERT
(
+
) insert the menu item
Find the Feature
M
>
Settings
>
Other Settings
>
Personalize
>
Keys
138
PRELIMINARY
Adjusting Your Settings
Screen Saver
You can set a picture or an animation as a screen saver
image in your phone’s idle display. The image is displayed
when no activity is detected for a specified time period.
The screen saver image is shrunk to fill the display, if
necessary. An animation repeats for one minute, then the
first frame of the animation is displayed.
Press To
1
S
scroll to
Left
,
Right
, or
Smart
2
CHANGE
(
+
) select the key
3
S
scroll to the new key function
4
CHANGE
(
+
) confirm the new function
Find the Feature
M
>
Settings
>
Other Settings
>
Personalize
>
Screen Saver
Press To
1
S
scroll to
Picture
2
CHANGE
(
+
) open the picture viewer
3S
scroll to a picture/animation
Scroll to
(None)
to turn off the
screen saver image.
4
SELECT
(
+
) select the image
5
S
scroll to
Delay
6
CHANGE
(
+
) set the delay interval
139
PRELIMINARY
Adjusting Your Settings
Hiding or Showing Location
Information
Your phone can use the automatic location
information (ALI) feature to tell the network where
you are physically located.
When ALI is set to
Location On
, your phone displays the
N
(ALI on) indicator.Services may use your known location to
provide useful information (for example, driving directions,
or the location of the nearest bank). Your phone prompts
you when the network or a service asks for your location.
You can refuse at this point.
When ALI is set to
911 Only
, your phone displays the
M
(ALI off) indicator, and the phone does not send location
information unless you call the emergency phone number
(such as 911).
7
S
scroll to the inactivity interval
that triggers the screen saver
8
SELECT
(
+
) confirm the delay setting
9
DONE
(
-
) save screen saver settings
Press To
1
S
scroll to
Location On
or
911 Only
2
SELECT
(
+
) select the setting
Press To
140
PRELIMINARY
Adjusting Your Settings
TTY Operation
You can use an optional TTY device with your
phone to send and receive calls. You must plug the
TTY device into the phone’s headset jack and set
the phone to operate in one of three TTY modes.
Notes:
•
Use a TSB-121 compliant cable (provided by the TTY
manufacturer) to connect the TTY device to your
phone.
•
Set the phone volume to level 4 (middle setting) for
proper operation. If you experience a high number of
incorrect characters, adjust the volume as necessary
to minimize the error rate.
•
For optimal performance, your phone should be at
least 12 inches (30 centimeters) away from the TTY
device. Placing the phone too close to the TTY device
may cause high error rates.
Set TTY Mode
When you set your phone to a TTY mode, it operates in
that mode whenever the TTY device is connected.
Find the Feature
M
>
Settings
>
Other Settings
>
Initial Setup
>
TTY Setup
Press To
1
S
scroll to
TTY Setup
2
CHANGE
(
+
) change the TTY mode
141
PRELIMINARY
Adjusting Your Settings
The
TTY Setup
menu can include the following options:
When your phone is in a TTY mode, the international
TTY symbol and the mode setting are shown in the
display during an active digital TTY call. You can press
TTYMODE
(
-
) to change the mode setting.
Switch to TTY Mode During a Voice Call
3
S
scroll to the TTY mode
4
SELECT
(
+
) select the TTY mode
Option Description
TTY
Transmit and receive TTY characters
VCO
Receive TTY characters but transmit
by speaking into the microphone
HCO
Transmit TTY characters but receive
by listening to the earpiece
Voice
Return to normal voice mode
Press To
1
M
open the
Call
menu
2
S
scroll to
TTY Setup
3
SELECT
(
+
) display the
TTY Setup
menu
4
S
scroll to the TTY mode
5
SELECT
(
+
) select the TTY mode
Press To
ù
142
PRELIMINARY
Adjusting Your Settings
Return to Voice Mode
To return to normal voice mode, select
Voice
from the
TTY Setup
menu as described on page 140.
Hands-Free Use
You can purchase an optional Motorola Original™
hands-free car kit or headset for your phone.
These accessories provide alternative ways for
you to use your phone without using your hands.
Note:
The use of wireless devices and their accessories
may be prohibited or restricted in certain areas. Always
obey the laws and regulations on the use of these
products.
Automatic Answer
You can set your phone to automatically answer calls after
two rings (four seconds) when connected to a car kit or
headset.
Find the Feature
M
>
Settings
>
Other Settings
Press To
1
S
scroll to
Car Settings
or
Headset
2
SELECT
(
+
) select the feature
3
S
scroll to
Auto Answer
4
CHANGE
(
+
) select
Auto Answer
5
S
scroll to
On
or
Off
6
SELECT
(
+
) confirm the setting
143
PRELIMINARY
Adjusting Your Settings
Automatic Hands-Free
You can set your phone to automatically route calls to a car
kit when it detects a connection.
Power-Off Delay
When your phone is connected to a car kit, you can set it to
stay on for a period of time after you switch off the ignition.
This prevents the phone from draining your vehicle battery,
but leaves the phone on long enough that you do not have
to re-enter your unlock code when making short stops.
Note:
This feature may not work with all car ignition
switches.
Caution:
If you select
Continuous
, the phone does not
power off when you turn off the ignition. Be careful not to
drain your vehicle battery if you select this option.
Find the Feature
M
>
Settings
>
Other Settings
>
Car Settings
>
Auto Handsfree
Press To
1
S
scroll to
On
or
Off
2
SELECT
(
+
) confirm the setting
Find the Feature
M
>
Settings
>
Other Settings
>
Car Settings
>
Power-Off Delay
144
PRELIMINARY
Adjusting Your Settings
Charger Time
When your phone is connected to a car kit, you can set it to
charge itself for a specified time period after you switch off
the ignition. This helps ensure that the phone battery gets
fully charged while the vehicle is parked.
Note:
This feature may not work with all car ignition
switches.
Press To
1
S
scroll to the time delay
2
SELECT
(
+
) confirm your selection
Find the Feature
M
>
Settings
>
Other Settings
>
Car Settings
>
Charger Time
Press To
1
S
scroll to the charge time
2
SELECT
(
+
) confirm your selection
145
PRELIMINARY
Data and Fax Calls
Data and Fax Calls
An optional Motorola Original™ data kit (which
includes a cable connector) lets you transfer
data between your phone and a computer,
Palm OS
®
compatible device, or Microsoft
Windows CE, Pocket PC, or Handheld PC device. You can:
•
Synchronize phonebook and datebook information
between your phone and a computer or PDA.
•
Use your phone as a modem to connect to the
Internet.
•
Use your phone to send and receive data and fax calls
on your computer or hand-held device.
Making a Cable Connection
Install the Software
To transfer data between your phone and computer, you
must install the software included with the Motorola
Original data kit. See the data kit’s user guide for more
information.
Attach the Cable
Use a Motorola Original serial cable or Motorola Original
USB cable to connect your phone to the external device.
Note:
Not all devices are compatible with a cable
connection. Check your computer or hand-held device to
determine the type of cable you need.
146
PRELIMINARY
Data and Fax Calls
Serial Cable
Do This
1
Plug the serial
cable into the
detachable head.
Make sure that the
Motorola logo on
the detachable
head and the
metal shielding on
the serial cable
plug are both
facing you.
2
With the Motorola
logo and the
phone both facing
you, plug the
detachable head
into the phone’s
accessory
connector port.
3
Plug the other end of the cable into the serial
interface connection on the device and tighten
the screws. if present.
147
PRELIMINARY
Data and Fax Calls
USB Cable
Synchronizing Data
You can synchronize phonebook and datebook information
between your phone, computer, and PDA with Starfish
TrueSync
®
software, a Motorola accessory product. See
the TrueSync user guide for more information.
Note:
TrueSync software is designed to synchronize with
basic features of many popular Personal Information
Management (PIM) software and hardware products.
Sending a Data or Fax Call
Use this procedure to send data or a fax from a connected
device.
Connect your phone to the device as described on
pages 145-147 and do the following:
Do This
1
Plug the end of the
cable with the
Motorola logo into the
phone’s accessory
connector port. Make
sure that the logo and
the phone are both
facing you.
2
Plug the other end—the USB connection—into
the USB port on the external device.
148
PRELIMINARY
Data and Fax Calls
Receiving a Data or Fax Call
Use this procedure to transfer data or a fax to your
computer or hand-held device. Connect your phone to the
device as described on pages 145-147.
Set Up Your Phone
Do This To
1
Check the phone make sure that the phone is
connected and powered on
2
Open the
application on
your computer
place the call through the
application (such as
dial-up-networking or fax)
Note:
You cannot dial data or
fax numbers through your
phone’s keypad. You must
dial them through your
computer.
3
End the call from
the connected
device
close the call and connection
when the transfer is complete
Find the Feature
M
>
Settings
>
Other Settings
>
Connection
>
Incoming Call
Do This To
1
Press
CHANGE
(
+
) select
Next Call
149
PRELIMINARY
Data and Fax Calls
Note:
You cannot answer incoming voice calls when your
phone is in data or fax mode. Any voice calls you receive
are treated as unanswered calls. To return a voice call,
reset your phone to voice mode as described on page 149.
Transfer the Data or Fax
Your phone notifies you when the data or fax call arrives,
and transfers the call to the connected device. Use the
application running on the device to answer the call.
End the Data/Fax Connection
When the data or fax transfer is complete, end the call
from the connected device to close the connection.
Reset Normal Voice Operation
After making a data or fax call, you must reset your phone
to resume normal voice operations.
Your phone also reverts to normal voice operations when
you turn it off and then turn it back on.
2
Press
S
scroll to
Data In Only
or
Fax In Only
3
Press
SELECT
(
+
) set the call format
4
Connect your phone
to the device
enable the data or fax
transfer
Find the Feature
M
>
Settings
>
Other Settings
>
Connection
>
Incoming Call
>
Next Call
>
Normal
Do This To
150
PRELIMINARY
Security
Security
Assigning a New Code or
Password
Your phone’s unlock code is originally set to 1234, and the
security code is originally set to 000000. Your service
provider may reset these numbers before you receive
your phone.
If your service provider has not reset these numbers,
we recommend that you change them to prevent other
users from accessing your personal information. The
unlock code must contain four digits, and the security code
must contain six digits.
Notes:
•
Your service provider may retain your phone’s security
code for customer service purposes. In this case, you
will not be able to use phone features that require you
to enter the security code.
•
If the unlock code is the only code you can change,
the
New Passwords
menu is not available. In this case,
change the unlock code by selecting:
M
>
Settings
>
Security
>
Phone Lock
>
Unlock Code
.
To change a code or password:
Find the Feature
M
>
Settings
>
Security
>
New Passwords
151
PRELIMINARY
Security
If You Forget a Code or
Password
If you forget your security code, contact your service
provider.
If you forget your unlock code, try entering 1234 or the last
four digits of your phone number. If that does not work, do
the following at the
Enter Unlock Code
prompt:
Press To
1
S
scroll to the code or password
2
CHANGE
(
+
) select the code or password
3
keypad keys enter your old code
4
OK
(
+
) submit your old code
5
keypad keys enter the new code
6
OK
(
+
) assign the new code
7
keypad keys re-enter the new code
8
OK
(
+
) confirm the new code
Press To
1
M
go to the unlock code bypass
screen
2
keypad keys enter your security code
3
OK
(
+
) submit your security code
152
PRELIMINARY
Security
Locking and Unlocking Your
Phone
You can lock your phone manually or set the phone to lock
automatically whenever you turn it off.
To use a locked phone, you must enter the unlock code. A
locked phone still rings or vibrates for incoming calls or
messages, but you must unlock it to answer.
You can make emergency calls on your phone even
when it is locked. For more information, see page 32.
Lock Your Phone Manually
Set Your Phone to Lock Automatically
You can set your phone to lock every time you turn it off.
Find the Feature
M
>
Settings
>
Security
>
Phone Lock
>
Lock Now
Press To
1
keypad keys enter your unlock code
2
OK
(
+
) lock the phone
Find the Feature
M
>
Settings
>
Security
>
Phone Lock
>
Automatic Lock
>
On
Press To
1
keypad keys enter your unlock code
2
OK
(
+
) activate automatic lock
153
PRELIMINARY
Security
Unlock Your Phone
At the
Enter Unlock Code
prompt:
Restricting Calls
You can stop all incoming and/or outgoing calls, or you
can restrict outgoing calls to the numbers stored in your
phonebook.
Notes:
•
You can make emergency calls when outgoing calls
are restricted.
•
Your phone still receives incoming text messages
when incoming calls are restricted.
Press To
1
keypad keys enter your unlock code
2
OK
(
+
) unlock your phone
Find the Feature
M
>
Settings
>
Security
>
Restrict Calls
Press To
1
keypad keys enter your unlock code
2
OK
(
+
) open the restrict calls menu
3
S
scroll to
Outgoing Calls
or
Incoming Calls
4
CHANGE
(
+
) select the option
5
CHANGE
(
+
) change the
Allow
setting
6
S
scroll to
All
,
None
, or
Phonebook
154
PRELIMINARY
Security
Tip:
The phonebook is not locked when you restrict
outgoing calls to numbers stored in the phonebook. To
prevent a user from adding (and then calling) a new
phonebook entry, you may want to lock the phonebook.
See the “Lock Application” item on page 56.
7
SELECT
(
+
) select the allowed calls
Press To
155
PRELIMINARY
Troubleshooting
Troubleshooting
Check these questions first if you have problems with your
phone. If you need additional help, contact the Motorola
Customer Call Center at 1-800-331-6456 (United States)
or 1-800-461-4575 (Canada).
Question Answer
Is your phone
set up
correctly?
Press
M
#
. If you do not see
your phone number, contact your
service provider.
Is your battery
charged? Do
you see
B
in
the display?
The battery level indicator should
have at least one segment
showing (
C
). If it does not,
recharge your battery. See
page 18.
Does the
handset have
a signal? Do
you see
j
in
the display?
Make sure that your antenna is
fully extended. The signal strength
indicator should have at least one
segment showing (
1
). If it does
not, move to an area with a
stronger signal to use your phone.
Is the earpiece
volume too
low?
While on a call, press the upper
volume key on the side of your
phone.
156
PRELIMINARY
Troubleshooting
The following refer to specific problems:
Is the other
party unable
to hear you?
Make sure that your antenna is
fully extended and that your
phone is not muted. Press
UNMUTE
(
+
) if necessary to
unmute the phone.
Also, make sure that your phone’s
microphone is not blocked by its
carrying case or a sticker.
Has the phone
been
damaged,
dropped, or
gotten wet?
Dropping your phone, getting it
wet, or using a non-Motorola
battery or battery charger can
damage the phone. The phone’s
limited warranty does not cover
liquid damage or damage caused
from using non-Motorola
accessories.
Was a
non-Motorola
battery or
battery
charger used?
Problem Solution
My phone was
stolen. To
whom should I
report this?
Report a stolen phone to the
police and to your service provider
(the company that sends you your
monthly wireless service bill).
I forgot my
password.
See page 151.
Question Answer
157
PRELIMINARY
Troubleshooting
I pressed the
power key, but
nothing
happened.
Be sure to press and hold
P
(the
power key) until the display
appears and you hear an alert.
This could take several seconds. If
nothing happens, check that a
charged battery is installed. See
page 17.
The display
says:
Enter
Unlock Code
.
How do I
unlock my
phone?
Enter the factory-preset unlock
code (1234), or the last four digits
of your phone number. If this fails,
call your service provider (the
company that sends you your
monthly wireless service bill).
My phone asks
for an unlock
code when I
try to open a
feature.
The application you want is
locked. If you do not know the
unlock code, see page 151.
My phone
does not ring.
If you see
t
or
y
in the
display, then the ringer is turned
off. See page 110.
Also, the ringer may be set to
Silent
even though your phone is
set to an audible ring style. See
page 110.
Problem Solution
158
PRELIMINARY
Troubleshooting
My phone
rings even
though I
selected the
Silent
(or
Vibrate
) ring
style.
The ringer may be set to play a
tone even though your phone is
set to a silent ring style. See
page 110.
I tried to place
a call and
heard an
alternating
high/low tone.
Your call did not reach the
wireless system. You may have
dialed the number too soon after
turning the phone on. Wait until
the display says
Ready
before
making a call.
I cannot send/
receive calls.
Make sure that your antenna is
fully extended and that you have a
phone signal (see the “Signal
Strength Indicator” item on
page 24). Avoid electrical or radio
interference, and obstructions
such as bridges, parking garages,
or tall buildings.
Your phone also may have the
Restrict Calls
feature turned on.
If you know the unlock code, you
can change this setting in the
security menu (
M
>
Settings
>
Security
).
Problem Solution
159
PRELIMINARY
Troubleshooting
My phone has
poor reception
and drops
calls.
Make sure that your antenna is
fully extended and is not bent or
damaged.
Also, make sure you have a phone
signal (see the “Signal Strength
Indicator” item on page 24). Stay
clear of any obstructions such as
bridges, parking garages, or tall
buildings.
I cannot hear
others on my
phone.
While on a call, press the upper
volume key. The display should
show the volume increasing.
Also, make sure that your phone’s
earpiece is not blocked by its
carrying case.
I cannot open
my message
inbox.
Before you can use text
messages, you must set up the
message inbox. See page 91.
How do I see
the calls I sent
or received?
To see the most recent calls you
dialed or received:
M
>
Recent Calls
>
Received Calls
or
Dialed Calls
Problem Solution
160
PRELIMINARY
Troubleshooting
My phone will
not send
voicemail
commands,
passwords, or
other codes.
Your phone sends commands and
passwords as DTMF tones. You
can set your phone’s DTMF tones
to be
Long
,
Short
, or
Off
. If you
have trouble sending numbers, try
changing the DTMF setting.
1
From the idle display, press:
M
>
Settings
>
Other Settings
>
Initial Setup
>
DTMF
2
Press
S
to scroll to
Long
or
Short
(some analog networks
may not recognize short
tones).
3
Press
SELECT
(
+
) to select
it.
My phone’s
display is too
dark.
Use the
Contrast
feature to
change the level of contrast in
your display. See page 59.
You can also use the
Backlight
feature to change the length of
time that the display backlight
stays on. See page 58.
Problem Solution
161
PRELIMINARY
Troubleshooting
My battery
didn’t last as
long as I
expected.
What can I do
to extend
battery life
Your battery’s performance is
affected by charge time, feature
use, temperature changes,
backlight use, and other factors.
For tips on extending your battery
life, see page 28.
I am unable to
record a voice
note, voice
name, or voice
shortcut
.
Try moving to a quieter location to
make your voice recording. Hold
the phone about four inches (10
centimeters) from your mouth,
and speak directly into the phone
in a normal tone of voice.
My TTY device
doesn’t work
with my
phone.
Your phone must be set to a TTY
mode for the phone to detect your
TTY device. See page 140.
I plugged the
data cable into
my phone but
my phone did
not beep. How
do I know if
the data cable
is ready to go?
The beep indicates that you are
set up correctly. If you did not hear
a beep, make sure that both ends
of the data cable are connected—
the smaller end to your phone and
the larger end to your computer.
Also, your computer may have
deactivated the port to save
power. Try opening an application
that uses the port, like a fax or
dial-up application, to
automatically activate the port.
Problem Solution
162
PRELIMINARY
Troubleshooting
My phone
beeped when I
attached the
data cable, but
my data and
fax
applications
don’t work.
You must be in an area with digital
coverage. Check your phone’s
display for the digital signal
indicator (
F
).
Some wireless networks may not
support data or fax transmission.
If you see the digital indicator, but
you are roaming on an unfamiliar
network, this may be the case.
Also, remember that data and fax
transmission usually requires a
subscription. Call your service
provider for more information.
When sending
data with the
data cable,
why does the
computer
show a
connection
rate of 19200
Kbps?
19200 Kbps is the data transfer
rate of the connection between
your computer and the phone.
The rate of the connection
between your phone and the
network is displayed on your
phone, and will be either 14400 or
9600 Kbps.
I can’t end my
data call by
closing the
application on
my computer.
What can I do?
Try pressing
O
on your phone. Or
try disconnecting the cable or
turning off the phone. If possible,
always close the connection
through your computer, as these
alternative methods may disrupt
the application on your computer.
Problem Solution
163
PRELIMINARY
Troubleshooting
I launched the
micro-browser
but the display
says:
Service Not
Available
.
You may be in an area without
service. If you have wireless
service, look in the display for the
digital signal indicator (
F
). If you
do not see the indicator, you may
be in an area that has only analog
service or no service at all. If you
see the digital signal indicator, you
may be connected to a digital
network that does not support
Internet access.
I launched the
micro-browser
but the display
says:
Data Server
Unavailable
.
Try again in a few minutes. The
servers may be temporarily busy.
Problem Solution
164
PRELIMINARY
Programming
Instructions
Follow this procedure if you need to program your phone’s
phone number(s) or system ID.
Note:
Programming is normally done by a trained technician
at the site of purchase. Users should not make changes other
than ones in the following procedure.
Before programming, ask your service provider for your:
•
10-digit MIN (Mobile Identification Number)
•
8- to 15-digit IMSI (International Mobile Service
Identifier)
•
8- to 15-digit MDN (Mobile Directory Number)
•
5-digit AMPS Sys ID number
•
5-digit CDMA Sys ID number
Do This To
1
Press
7
,
4
,
6
,
6
,
3
,
#
,
M
,
M
(These keys spell P-H-O-N-E
+
#
,
M
,
M
.)
open the user
activation menu
2
Press
S
scroll to
NAM1
(phone
number 1) or
NAM2
(phone number 2)
3
Press
SELECT
(
+
) open the NAM
programming menu
165
PRELIMINARY
4
Press the keypad keys for the
10-digit MIN
open the MIN editor
and enter the new MIN
5
Press
OK
(
+
) store the new MIN
6
Similarly, enter appropriate numbers for the IMSI, MDN,
AMPS Sys ID, and CDMA Sys ID
7
Press
DONE
(
-
) close the NAM
programming menu
8
Press
EXIT
(
-
) close the user
activation menu
Do This To
166
PRELIMINARY
Specific Absorption Rate Data
The Motorola V60i V60xwireless phone meets the
government’s requirements for exposure to radio waves.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission (FCC) of the U.S.
Government and by Health Canada for Canada. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on standards that were
developed by independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all persons,
regardless of age or health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC and by Health Canada is 1.6W/kg.
1
Tests for SAR are
conducted using standard operating positions accepted by the FCC and
by Industry Canada with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels so as
to use only the power required to reach the network. In general, the closer
you are to a wireless base station, the lower the power output.
Before a phone model is available for sale to the public in the U.S. and
Canada, it must be tested and certified to the FCC and Industry Canada
that it does not exceed the limit established by each government for safe
exposure. The tests are performed in positions and locations (e.g., at the
ear and worn on the body) reported to the FCC and available for review by
Industry Canada. The highest SAR value for this model phone when
tested for use at the ear is
1.57
W/kg, and when worn on the body, as
described in this user guide, is 0.619 W/kg. (Body-worn measurements
167
PRELIMINARY
measurements differ among phone models, depending upon available
accessories and regulatory requirements).
2
While there may be differences between the SAR levels of various phones
and at various positions, they all meet the governmental requirements for
safe exposure.
Additional information on Specific Absorption Rates (SAR) can be found
on the Cellular Telecommunications & Internet Association (CTIA) Web
site:
http://phonefacts.net
or the Canadian Wireless Telecommunications Association (CWTA) Web
site:
http://www.cwta.ca
1. In the United States and Canada, the SAR limit for mobile phones used by
the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in measurements.
2. The SAR information includes the Motorola testing protocol, assessment
procedure, and measurement uncertainty range for this product.
ITC02-155
168
PRELIMINARY
The U.S. Food and Drug
Administration's Center for
Devices and Radiological Health
Consumer Update on Mobile Phones
Additional Health and Safety Information
FDA has been receiving inquiries about the safety of mobile phones,
including cellular phones and PCS phones. The following summarizes
what is known—and what remains unknown—about whether these
products can pose a hazard to health, and what can be done to minimize
any potential risk. This information may be used to respond to questions.
Why the concern?
Mobile phones emit low levels of radio frequency energy (i.e., radio
frequency radiation) in the microwave range while being used. They also
emit very low levels of radio frequency energy (RF), considered non-
significant, when in the stand-by mode. It is well known that high levels of
RF can produce biological damage through heating effects (this is how
your microwave oven is able to cook food). However, it is not known
whether, to what extent, or through what mechanism, lower levels of RF
might cause adverse health effects as well. Although some research has
been done to address these questions, no clear picture of the biological
effects of this type of radiation has emerged to date. Thus, the available
science does not allow us to conclude that mobile phones are absolutely
safe, or that they are unsafe. However, the available scientific evidence
does not demonstrate any adverse health effects associated with the use
of mobile phones.
What kinds of phones are in question?
Questions have been raised about hand-held mobile phones, the kind that
have a built-in antenna that is positioned close to the user's head during
normal telephone conversation. These types of mobile phones are of
concern because of the short distance between the phone's antenna—
169
PRELIMINARY
the primary source of the RF—and the person's head. The exposure to
RF from mobile phones in which the antenna is located at greater
distances from the user (on the outside of a car, for example) is drastically
lower than that from hand-held phones, because a person's RF exposure
decreases rapidly with distance from the source. The safety of so-called
“cordless phones,” which have a base unit connected to the telephone
wiring in a house and which operate at far lower power levels and
frequencies, has not been questioned.
How much evidence is there that hand-held
mobile phones might be harmful?
Briefly, there is not enough evidence to know for sure, either way;
however, research efforts are on-going. The existing scientific evidence is
conflicting and many of the studies that have been done to date have
suffered from flaws in their research methods. Animal experiments
investigating the effects of RF exposures characteristic of mobile phones
have yielded conflicting results. A few animal studies, however, have
suggested that low levels of RF could accelerate the development of
cancer in laboratory animals. In one study, mice genetically altered to be
predisposed to developing one type of cancer developed more than twice
as many such cancers when they were exposed to RF energy compared
to controls. There is much uncertainty among scientists about whether
results obtained from animal studies apply to the use of mobile phones.
First, it is uncertain how to apply the results obtained in rats and mice to
humans. Second, many of the studies that showed increased tumor
development used animals that had already been treated with cancer-
causing chemicals, and other studies exposed the animals to the RF
virtually continuously—up to 22 hours per day.
For the past five years in the United States, the mobile phone industry has
supported research into the safety of mobile phones. This research has
resulted in two findings in particular that merit additional study:
1
In a hospital-based, case-control study, researchers looked for an
association between mobile phone use and either glioma (a type of
brain cancer) or acoustic neuroma (a benign tumor of the nerve
170
PRELIMINARY
sheath). No statistically significant association was found between
mobile phone use and acoustic neuroma. There was also no
association between mobile phone use and gliomas when all types of
types of gliomas were considered together. It should be noted that
the average length of mobile phone exposure in this study was less
than three years.
When 20 types of glioma were considered separately, however, an
association was found between mobile phone use and one rare type
of glioma, neuroepithelliomatous tumors. It is possible with multiple
comparisons of the same sample that this association occurred by
chance. Moreover, the risk did not increase with how often the mobile
phone was used, or the length of the calls. In fact, the risk actually
decreased with cumulative hours of mobile phone use. Most cancer
causing agents increase risk with increased exposure. An ongoing
study of brain cancers by the National Cancer Institute is expected to
bear on the accuracy and repeatability of these results.
1
2
Researchers conducted a large battery of laboratory tests to assess
the effects of exposure to mobile phone RF on genetic material.
These included tests for several kinds of abnormalities, including
mutations, chromosomal aberrations, DNA strand breaks, and
structural changes in the genetic material of blood cells called
lymphocytes. None of the tests showed any effect of the RF except
for the micronucleus assay, which detects structural effects on the
genetic material. The cells in this assay showed changes after
exposure to simulated cell phone radiation, but only after 24 hours of
exposure. It is possible that exposing the test cells to radiation for this
long resulted in heating. Since this assay is known to be sensitive to
heating, heat alone could have caused the abnormalities to occur.
The data already in the literature on the response of the micronucleus
assay to RF are conflicting. Thus, follow-up research is necessary.
2
FDA is currently working with government, industry, and academic groups
to ensure the proper follow-up to these industry-funded research findings.
Collaboration with the Cellular Telecommunications Industry Association
(CTIA) in particular is expected to lead to FDA providing research
171
PRELIMINARY
recommendations and scientific oversight of new CTIA-funded research
based on such recommendations.
Two other studies of interest have been reported recently in the literature:
1
Two groups of 18 people were exposed to simulated mobile phone
signals under laboratory conditions while they performed cognitive
function tests. There were no changes in the subjects' ability to recall
words, numbers, or pictures, or in their spatial memory, but they were
able to make choices more quickly in one visual test when they were
exposed to simulated mobile phone signals. This was the only
change noted among more than 20 variables compared.
3
2
In a study of 209 brain tumor cases and 425 matched controls, there
was no increased risk of brain tumors associated with mobile phone
use. When tumors did exist in certain locations, however, they were
more likely to be on the side of the head where the mobile phone was
used.
Because this occurred in only a small number of cases, the increased
likelihood was too small to be statistically significant.
4
In summary, we do not have enough information at this point to assure the
public that there are, or are not, any low incident health problems
associated with use of mobile phones. FDA continues to work with all
parties, including other federal agencies and industry, to assure that
research is undertaken to provide the necessary answers to the
outstanding questions about the safety of mobile phones.
What is known about cases of human cancer
that have been reported in users of hand-held
mobile phones?
Some people who have used mobile phones have been diagnosed with
brain cancer. But it is important to understand that this type of cancer also
occurs among people who have not used mobile phones. In fact, brain
cancer occurs in the U.S. population at a rate of about 6 new cases per
100,000 people each year. At that rate, assuming 80 million users of
172
PRELIMINARY
mobile phones (a number increasing at a rate of about 1 million per
month), about 4800 cases of brain cancer would be expected each year
among those 80 million people, whether or not they used their phones.
Thus it is not possible to tell whether any individual's cancer arose
because of the phone, or whether it would have happened anyway. A key
question is whether the risk of getting a particular form of cancer is
greater among people who use mobile phones than among the rest of the
population. One way to answer that question is to compare the usage of
mobile phones among people with brain cancer with the use of mobile
phones among appropriately matched people without brain cancer. This
is called a case-control study. The current case-control study of brain
cancers by the National Cancer Institute, as well as the follow-up research
to be sponsored by industry, will begin to generate this type of
information.
What is FDA's role concerning the safety of
mobile phones?
Under the law, FDA does not review the safety of radiation-emitting
consumer products such as mobile phones before marketing, as it does
with new drugs or medical devices. However, the agency has authority to
take action if mobile phones are shown to emit radiation at a level that is
hazardous to the user. In such a case, FDA could require the
manufacturers of mobile phones to notify users of the health hazard and
to repair, replace or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions
at this time, FDA has urged the mobile phone industry to take a number of
steps to assure public safety. The agency has recommended that the
industry:
•
support needed research into possible biological effects of RF of the
type emitted by mobile phones
•
design mobile phones in a way that minimizes any RF exposure to
the user that is not necessary for device function
173
PRELIMINARY
•
cooperate in providing mobile phone users with the best possible
information on what is known about possible effects of mobile phone
use on human health
At the same time, FDA belongs to an interagency working group of the
federal agencies that have responsibility for different aspects of mobile
phone safety to ensure a coordinated effort at the federal level. These
agencies are:
•
National Institute for Occupational Safety and Health
•
Environmental Protection Agency
•
Federal Communications Commission
•
Occupational Health and Safety Administration
•
National Telecommunications and Information Administration
The National Institutes of Health also participates in this group.
In the absence of conclusive information about
any possible risk, what can concerned
individuals do?
If there is a risk from these products—and at this point we do not know
that there is—it is probably very small. But if people are concerned about
avoiding even potential risks, there are simple steps they can take to do
so. For example, time is a key factor in how much exposure a person
receives. Those persons who spend long periods of time on their hand-
held mobile phones could consider holding lengthy conversations on
conventional phones and reserving the hand-held models for shorter
conversations or for situations when other types of phones are not
available.
People who must conduct extended conversations in their cars every day
could switch to a type of mobile phone that places more distance between
their bodies and the source of the RF, since the exposure level drops off
dramatically with distance. For example, they could switch to:
•
a mobile phone in which the antenna is located outside the vehicle
174
PRELIMINARY
•
a hand-held phone with a built-in antenna connected to a different
antenna mounted on the outside of the car or built into a separate
package
•
a headset with a remote antenna to a mobile phone carried at the
waist
Again, the scientific data do not demonstrate that mobile phones are
harmful. But if people are concerned about the radio frequency energy
from these products, taking the simple precautions outlined above can
reduce any possible risk.
Where can I find additional information?
For additional information, see the following Web sites:
Federal Communications Commission
(FCC) RF Safety Program
(select “Information on Human Exposure to RF Fields from Cellular and
PCS Radio Transmitters”):
http://www.fcc.gov/oet/rfsafety
World Health Organization
(WHO) International Commission on
Non-Ionizing Radiation Protection (select Qs & As):
http://
www.who.int/emf
United Kingdom, National Radiological Protection Board
:
http://www.nrpb.org.uk
Cellular Telecommunications Industry Association
(CTIA):
http://www.wow-com.com
U.S. Food and Drug Administration
(FDA) Center for Devices and
Radiological Health:
http://www.fda.gov/cdrh/consumer/
175
PRELIMINARY
1. Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant
Brain Tumors. In: State of the Science Symposium;1999 June 20; Long
Beach, California.
2. Tice et al. Tests of mobile phone signals for activity in genotoxicity and other
laboratory assays. In: Annual Meeting of the Environmental Mutagen Society;
March 29, 1999, Washington, D.C.; and personal communication,
unpublished results.
3. Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey,
A. Effect of a 915-MHz simulated mobile phone signal on cognitive function
in man. Int. J. Radiat. Biol., April 8, 1999.
4. Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of cellular
telephones and the risk for brain tumors: a case-control study. Int. J. Oncol.,
15: 113-116, 1999.
ITC00-010
176
PRELIMINARY
Motorola Limited Warranty for
the United States and Canada
Warranty
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants its
telephones, pagers, and consumer and professional two-way radios
(excluding commercial, government or industrial radios) that operate via
Family Radio Service or General Mobile Radio Service, Motorola-branded
or certified accessories sold for use with these Products (“Accessories”)
and Motorola software contained on CD-ROMs or other tangible media
and sold for use with these Products (“Software”) to be free from defects
in materials and workmanship under normal consumer usage for the
period(s) outlined below. This limited warranty is a consumer's exclusive
remedy, and applies as follows to new Motorola Products, Accessories
and Software purchased by consumers in the United States or Canada,
which are accompanied by this written warranty:
Products and Accessories
Products Covered Length of Coverage
Products and Accessories
as
defined above, unless otherwise
provided for below.
One (1) year
from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Decorative Accessories and
Cases
. Decorative covers,
bezels, PhoneWrap™ covers and
cases.
Limited lifetime warranty
for the
lifetime of ownership by the first
consumer purchaser of the
product.
Monaural Headsets.
Ear buds
and boom headsets that transmit
mono sound through a wired
connection.
Limited lifetime warranty
for the
lifetime of ownership by the first
consumer purchaser of the
product.
177
PRELIMINARY
Exclusions
Normal Wear and Tear.
Periodic maintenance, repair and replacement of
parts due to normal wear and tear are excluded from coverage.
Batteries.
Only batteries whose fully charged capacity falls below 80% of
their rated capacity and batteries that leak are covered by this limited
warranty.
Abuse & Misuse.
Defects or damage that result from: (a) improper
operation, storage, misuse or abuse, accident or neglect, such as physical
damage (cracks, scratches, etc.) to the surface of the product resulting
from misuse; (b) contact with liquid, water, rain, extreme humidity or
heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of
the Products or Accessories for commercial purposes or subjecting the
Product or Accessory to abnormal usage or conditions; or (d) other acts
which are not the fault of Motorola, are excluded from coverage.
Use of Non-Motorola Products and Accessories.
Defects or damage
that result from the use of Non-Motorola branded or certified Products,
Accessories, Software or other peripheral equipment are excluded from
coverage.
Unauthorized Service or Modification.
Defects or damages resulting
from service, testing, adjustment, installation, maintenance, alteration, or
modification in any way by someone other than Motorola, or its authorized
service centers, are excluded from coverage.
Consumer and Professional
Two-Way Radio Accessories.
Ninety (90) days
from the date of
purchase by the first consumer
purchaser of the product.
Products and Accessories that
are Repaired or Replaced.
The balance of the original
warranty or for ninety (90) days
from the date returned to the
consumer, whichever is longer.
Products Covered Length of Coverage
178
PRELIMINARY
Altered Products.
Products or Accessories with (a) serial numbers or
date tags that have been removed, altered or obliterated; (b) broken seals
or that show evidence of tampering; (c) mismatched board serial
numbers; or (d) nonconforming or non-Motorola housings, or parts, are
excluded from coverage.
Communication Services.
Defects, damages, or the failure of Products,
Accessories or Software due to any communication service or signal you
may subscribe to or use with the Products Accessories or Software is
excluded from coverage.
Software
Exclusions
Software Embodied in Physical Media.
No warranty is made that the
software will meet your requirements or will work in combination with any
hardware or software applications provided by third parties, that the
operation of the software products will be uninterrupted or error free, or
that all defects in the software products will be corrected.
Software NOT Embodied in Physical Media.
Software that is not
embodied in physical media (e.g. software that is downloaded from the
internet), is provided “as is” and without warranty.
Who is Covered?
This warranty extends only to the first consumer purchaser, and is not
transferable.
What Will Motorola Do?
Motorola, at its option, will at no charge repair, replace or refund the
purchase price of any Products, Accessories or Software that does not
conform to this warranty. We may use functionally equivalent
Products Covered Length of Coverage
Software.
Applies only to physical defects
in the media that embodies the copy of the
software (e.g. CD-ROM, or floppy disk).
Ninety (90) days
from
the date of purchase.
179
PRELIMINARY
reconditioned/refurbished/pre-owned or new Products, Accessories or
parts. No data, software or applications added to your Product, Accessory
or Software, including but not limited to personal contacts, games and
ringer tones, will be reinstalled. To avoid losing such data, software and
applications please create a back up prior to requesting service.
How to Obtain Warranty Service or Other
Information?
You will receive instructions on how to ship the Products, Accessories or
Software, at your expense, to a Motorola Authorized Repair Center. To
obtain service, you must include: (a) a copy of your receipt, bill of sale or
other comparable proof of purchase; (b) a written description of the
problem; (c) the name of your service provider, if applicable; (d) the name
and location of the installation facility (if applicable) and, most importantly;
(e) your address and telephone number.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
USA
Phones
1-800-331-6456
Two-Way Radios
1-800-353-2729
Pagers
1-800-548-9954
Canada
All Products
1-800-461-4575
TTY
1-888-390-6456
For
Accessories
and
Software
, please call the telephone number
designated above for the product with which they are used.
180
PRELIMINARY
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS
ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR
INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE
TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY
LAW.
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation on
the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights that vary from state
to state or from one jurisdiction to another.
Laws in the United States and other countries preserve for Motorola
certain exclusive rights for copyrighted Motorola software such as the
exclusive rights to reproduce and distribute copies of the Motorola
software. Motorola software may only be copied into, used in, and
redistributed with, the Products associated with such Motorola software.
No other use, including without limitation disassembly of such Motorola
software or exercise of the exclusive rights reserved for Motorola, is
permitted.
ITC02-162
181
PRELIMINARY
Product Registration
Online Product Registration:
http://www.motorola.com/warranty
Product registration is an important step toward enjoying your new
Motorola product. Registering helps us facilitate warranty service, and
permits us to contact you should your product require an update or
other service. Registration is for U.S. residents only and is not required
for warranty coverage.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola Personal Communications Product
you will need to provide a copy of your dated sales receipt to confirm
warranty status.
Thank you for choosing a Motorola product.
Export Law Assurances
This product is controlled under the export regulations of the United
States of America and Canada. The Governments of the United States
of America and Canada may restrict the exportation or re-exportation
of this product to certain destinations. For further information contact
the U.S. Department of Commerce or the Canadian Department of
Foreign Affairs and International Trade.
182
PRELIMINARY
Index
A
accessories
optional 10, 86, 124, 140,
142, 145
standard 17
accessory connector port 1
active line indicator
defined 24
illustration 23
Add Digits
feature 65
alarm 79, 81
alarm clock 83–85
alert
creating 112–117
defined 110
reminders, turning on/off
118
selecting 110–111
setting 96, 130
turning off 32
analog signal indicator
defined 24
illustration 23
animation 59
inserting 107–108
managing 77–78
screen saver 138–139
screen saver, setting 78,
95, 130
storing 94, 129–131
answering a call 22
antenna 21
application, locking 57
appointments. See
datebook
Attach Number
feature 34,
65
auto PIN dial 58
automatic location
information (ALI)
139
automatic redial
turning on/off 58
using 30–31
B
backlight 58
banner text 62
battery
car kit charger time 144
charging 18–19
extending battery life 25,
28–29, 58, 59
installing 17–18
level indicator 19, 23, 24
183
PRELIMINARY
meter 54
block cursor, defined 41
browse text mode 42
browser alerts 97
browser. See micro-browser
C
calculator 132–134
calendar. See datebook
call
adding digits after phone
number 65
alert, creating 112–117
alert, selecting 110–111
alert, turning off 32
answer options 56
answering 22
call waiting 36
calling card 71
canceling 32
datebook, opening 37
deleting 64–65
dialed calls list 35, 37,
64–65
dialing 21
dialing a recent call
64–65
emergency number 32
ending 22
in-call timer 56
making 21
message center,
accessing 37
muting 37
prefix digits, inserting 34
received calls list 35, 37,
64–65
receiving 22
recent calls 64–65
restricting 153–154
ring style, setting 110
ring style, setting in
external display
27
speakerphone, activating
37
storing 64–65
three-way call 36
timing 66–67
unanswered call 27, 31
voice dial 35
Call Failed
message 30
call timers 66–67
call waiting 36
caller ID 31
calling card call 71
calling line identification.
See caller ID
car kit
automatic answer 142
automatic hands-free
143
charger time 144
184
PRELIMINARY
power-off delay 143
clock 23
codes
changing 150–151
default 21, 150
if you forget a
code/password
151
computer
synchronizing data 76
contrast, display 59
convertible covers 19–20
currency converter 134
cursor 41
D
data call
making 145–149
date, setting 58
datebook
adding an event 81
alarm 81
alarm clock 83–85
calendar 79
changing event
information 81
copying an event 82
day view 80
deleting an event 83
event reminders, turning
on/off 118
event view 80
reminders 81
synchronizing 147
week view 79
deleting a call 64–65
dialed calls list 35, 37,
64–65
dialing a number 21
digital signal indicator
defined 24
illustration 23
display
animation 59
backlight 58
banner text 62
contrast 59
described 23–25
greeting 61
idle display 23
illustration 23
language 59
zoom setting 59
zooming in/out 25
drafts folder 53
DTMF tones 37, 60, 65,
160
E
earpiece
illustration 1
volume, adjusting 26
email
185
PRELIMINARY
address, storing in
phonebook 69–71
email, sending 74, 103–106
emergency number 32
end key 38
functions 1, 22
ending a call 22
Enter Unlock Code
message
151, 153
event alert 110–111
exchange rate, calculating
134
external device
synchronizing data 76
external display 27
F
factory settings, resetting
60–61
flashing cursor, defined 41
flip
external display and 27
open to answer call 56
turning the phone on 21
FM Stereo Radio Headset
52, 86–88
G
games 135–136
Get It Now applications
135–136
greeting, display 61
H
hands-free mode
automatic answer 142
automatic call routing
143
charger time 144
defined 142
external display and 27
power-off delay 143
speakerphone, activating
37
headset
automatic answer 142
FM Stereo Radio Headset
52, 86–88
use with external display
27
headset jack 1
I
idle display, defined 23
in use indicator
defined 24
illustration 23
inbox, text message 91
in-call timer 56
incoming call
canceling 32
Incoming Call
message 31
indicators
active line 23, 24
186
PRELIMINARY
battery level 19, 23, 24
digital/analog signal 23,
24
in use 23, 24
location privacy 23
loud ring style 25, 110
menu 23, 24
message waiting 23, 24,
92, 97, 100
missed call 31
ring style 23, 25, 110
roam 23, 24
signal strength 23, 24
silent alert 25
silent ring style 25, 110
soft ring style 25, 110
vibrate and ring style 25,
110
vibrate style 25, 110
voice message waiting
24, 90
voice name 68
information services 98
information services
message
reminders, receiving 100
iTAP software 47–50
K
key
end 1, 22, 38
left soft key 1, 23, 38,
137
menu 1, 10, 24, 38
power 1, 21
right soft key 1, 23, 38,
137
scroll 1, 38
send 1, 22, 64
smart 1, 26–27
smart key 137
voice 1, 73, 122
volume control 1, 26, 38
keypad
answering calls 56
volume, setting 112
L
language, setting 59
left soft key
customizing 137
functions 1, 23, 38
location privacy indicator
illustration 23
location, sending to network
139
lock
applications 57
phone 152–153
voice notes 126
lock application feature 57
loud ring style indicator 25,
110
187
PRELIMINARY
Low Battery
message 24
M
making a call 21
master clear 61
master reset 60
Memory is Full!
message
92, 100
menu
Browser Menu
129
Calculator Menu
132
Datebook Menu
79, 80
Dialing Menu
34, 66
entering text 40–41,
42–50
features 51–63
language, setting 59
Last Calls Menu
65
lists 39
locking applications 57
My Tones Menu
116, 117
navigating 10, 38
personalizing 137
Phonebook Menu
68
Quick Note Menu
107
rearranging features 137
scroll feature 59
Text Msg Menu
93–94
using features 10, 39–41
Voice Notes Menu
123,
124, 125
menu indicator
defined 24
illustration 23
menu key 1, 10, 24, 38
message
animation 94–97,
107–108
browser alerts 97
deleting, text 92–94
dialing number from 34
drafts folder 53
inbox setup, text
message 91
information services 98
locking, text 92–94
outbox 52, 109
picture 94–97, 107–108
quick note 106–107
quick view 102
reading, text 92–94
receiving, text 92
reminders, receiving 90,
92
reminders, turning on/off
118
sending 34, 103–106
sound 94–97, 107–108
status 109
text 91–109
voicemail 89–90
message waiting indicator
97, 100
defined 24
188
PRELIMINARY
displayed 92
illustration 23
micro-browser
animation 129–131
background sessions
131
browser alerts 97
picture 129–131
sound 129–131
using 128–129
microphone 1
missed call indicator 31
Missed Call
message 31
missed call, dialing 35
Missed Calls
message 27
muting a call 37
my telephone number 3,
22, 37, 54
my tones 112–117
N
network settings 62
notepad
defined 65
entering digits 65
retrieving digits 65
number, viewing your own
3, 54
numeric text mode 42
O
one-touch dial
defined 33
using 33
voicemail number 33
optional accessory, defined
10
optional feature, defined 10
outbox 52, 109
P
passwords. See codes
pause character 72
phone
active line indicator 24
alert, turning off 32
answer options 56
automatic location
information 139
codes 150–151
erase user-entered
information 61
feature specifications 37,
55
flip 21
information 37
location 139
locking 152–153
reset all options 60
security code 150
specifications 37, 55
turning on/off 21
unlock code 21, 150, 151
unlocking 21, 152–153
189
PRELIMINARY
phone number
active line indicator 24
active phone line,
changing 54
adding digits after 65
attaching to prefix digits
34
attaching two numbers
65
redialing 30
seeing your own 22, 37
sending text message to
34
storing in phonebook
69–71
viewing your own 3, 54
voice dial 35
phonebook
attaching two numbers
65
deleting an entry 75
dialing a number 74
editing an entry 75
email address 68
entry details 68
entry name 68
number type indicator 68
one-touch dial 33
phone number 68
prefix digits, inserting 34
ringer ID,
activating/deactivat
ing 111
ringer ID, defined 70, 111
ringer ID, setting 70
sending an email 74
sorting entries 75
speed dial number 68, 70
speed dial number,
defined 33
speed dial, using 33
storing an entry 69–71
synchronizing 147
synchronizing entries 76
voice name entry 73
voice name indicator 68
picture
inserting 107–108
managing 77–78
screen saver 138–139
screen saver, setting 78,
95, 130
storing 94, 129–131
PIN code
dialing automatically 58
storing with phonebook
entry 71
power key 1, 21
predictive text entry 47–50
Q
quick note 106–107
190
PRELIMINARY
defined 91
quick view message
defined 102
R
radio 86–88
received calls list 35, 37,
64–65
recent calls 64–65
redial
automatic redial 30–31
busy number 30
reminders
datebook 81
defined 118
information services
message 100
text message 92
turning on/off 118
voicemail message 90
restricting calls 153–154
right soft key
customizing 137
functions 1, 23, 38
ring alert
selecting 110–111
turning off 32
ring style
customizing 110–112
defined 110
indicators 25, 110
setting 110
setting in external display
27
ring style indicator
defined 25, 110
illustration 23
ringer
volume, adjusting 26
volume, setting 112
ringer ID
activating/deactivating
111
defined 70, 111
setting for phonebook
entry 70
roam indicator
defined 24
illustration 23
S
screen saver 138–139
setting 78, 95, 130
scroll feature 59
scroll key 1, 38
security code
changing 150–151
send key 1, 22, 64
short message service. See
text message
shortcuts
creating 119–120
standard 119
using 121
191
PRELIMINARY
signal strength indicator
defined 24
illustration 23
silent alert indicator 25
silent ring style indicator 25,
110
smart key
customizing 137
defined 26–27
functions 26–27
illustration 1
SMS. See text message
soft keys
customizing 137
functions 23, 38
illustration 1
labels 23
soft ring style indicator 25,
110
sound
inserting 107–108
setting as alert tone 96,
130
storing 94, 129–131
speakerphone, activating
37
speed dial
changing number 70
number, defined 33
sorting phonebook entries
by 75
using 33
standby time
defined 26
increasing 29
status light 1, 25–26, 58
storing a call 64–65
symbol text mode 46–47
symbols, entering 46–47
synchronizing data 76
T
tap method text entry
43–45
telephone number, viewing
your own 3, 54
text
block cursor 41
browse mode 42
character chart 45
entering from keypad
42–50
entry mode, changing 42
flashing cursor 41
iTAP software predictive
text entry 47–50
numeric mode 42
symbol chart 46
symbol mode 46–47
tap method 43–45
text message
animation 94–97,
107–108
defined 91
192
PRELIMINARY
deleting 92–94
dialing number from 34
drafts folder 53
inbox setup 91
locking 92–94
outbox 52
picture 94–97, 107–108
quick note 106–107
reading 92–94
receiving 92
reminders 92
sending 34, 103–106
sound 94–97, 107–108
status 109
text mode, changing 42
three-way call 36
time, setting 58
timers 66–67
travel charger, using 18
TrueSync 76, 147
TTY device 140–142
U
unlock
phone 152–153
unlock code 151
bypassing 151
changing 150–151
entering 21, 152, 153
V
vibrate alert
selecting 110–111
turning off 32
vibrate and ring style
indicator 25, 110
vibrate ring style
setting 110
setting in external display
27
vibrate style
indicator 25, 110
voice dial
dialing a number 35, 74
recording voice name 73
voice key
dialing a number 35
functions 1
recording a voice name
73
recording a voice note
122
voice message waiting
indicator 24, 90
voice name
defined 73
phonebook indicator 68
recording 73
voice notes 122–127
voice shortcut
creating 119–120
defined 119
using 121
voicemail
194
PRELIMINARY
✂
PRELIMINARY
195
Wireless Phone Safety
Tips
“Safety is your most important call!”
Your Motorola wireless telephone gives you
the powerful ability to communicate by voice—
almost anywhere, anytime, wherever wireless
phone service is available and safe conditions allow.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first
responsibility. If you find it necessary to use your
wireless phone while behind the wheel of a car,
practice good common sense and remember the
following tips:
1 Get to know your Motorola wireless phone and its
features such as speed dial and redial.
If available,
these features help you to place your call without taking
your attention off the road.
✂
PRELIMINARY
196
2 When available, use a hands-free device.
If possible,
add an additional layer of convenience to your wireless
phone with one of the many Motorola Original™ hands-
free accessories available today.
3 Position your wireless phone within easy reach.
Be
able to access your wireless phone without removing
your eyes from the road. If you receive an incoming call
at an inconvenient time, if possible, let your voice mail
answer it for you.
4 Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions.
Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
5 If you receive an incoming call at an inconvenient
time do not take notes or look up phone numbers
while driving.
Jotting down a “to do” list or going
through your address book takes attention away from
your primary responsibility—driving safely.
6 Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic.
Try to plan calls when your car will
be stationary. If you need to make a call while moving,
dial only a few numbers, check the road and your
mirrors, then continue.
7 Do not engage in stressful or emotional
conversations that may be distracting.
Make people
you are talking with aware you are driving and suspend
conversations which have the potential to divert your
attention away from the road.
✂
PRELIMINARY
197
8 Use your wireless phone to call for help.
Dial 9-1-1 or
other local emergency number in the case of fire, traffic
accident or medical emergencies.*
9 Use your wireless phone to help others in
emergencies.
If you see an auto accident, crime in
progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as
you would want others to do for you.*
10 Call roadside assistance or a special
non-emergency wireless assistance number when
necessary.
If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other
special non-emergency wireless number.*
* Wherever wireless phone service is available.
✂
PRELIMINARY
198
Check the laws and regulations on the use of
wireless telephones and their accessories in the
areas where you drive. Always obey them. The
use of these devices may be prohibited or
restricted in certain areas.
For more information,
please call
1-888-901-SAFE
or visit the
CTIA Web site at
www.wow-com.com™
ITC00-011