Motorola Mobility T56CP1 In-Cabin Bluetooth Module User Manual Exh D1 ICBM antenna install instrsl

Motorola Mobility LLC In-Cabin Bluetooth Module Exh D1 ICBM antenna install instrsl

Exhibit D Users Manual per 2 1033 b3

Download: Motorola Mobility T56CP1 In-Cabin Bluetooth Module User Manual Exh D1 ICBM antenna install instrsl
Mirror Download [FCC.gov]Motorola Mobility T56CP1 In-Cabin Bluetooth Module User Manual Exh D1 ICBM antenna install instrsl
Document ID276513
Application IDeDXHHgUTKi8SQK7VWGbzyg==
Document DescriptionExhibit D Users Manual per 2 1033 b3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize0.86kB (10758 bits)
Date Submitted2002-10-14 00:00:00
Date Available2002-10-14 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareAcrobat PDFWriter 4.0 for Windows NT
Document Lastmod2002-10-02 08:04:57
Document TitleExh D1 ICBM_antenna_install_instrsl.PDF
Document CreatorExh D1 ICBM_antenna_install_instrsl.doc - Microsoft Word
Document Author: wek002

MOTOROLA INC
FCC ID: IHDT56CP1
IN-CABIN BLUETOOTH MODULE INSTALLATION INSTRUCTIONS
[Model# SYN9592A and cable length variants]
1. GENERAL:
The In-Cabin Bluetooth Module facilitates a wireless Bluetooth interface between
an in- vehicle control unit and other Bluetooth-enabled devices (such as a laptop PC, a
handset, etc.).
2. ANTENNA AND MODULE INSTALLATION:
The module utilizes an internal, pc board mounted, chip antenna. The unit is
designed for installation within the passenger compartment of an automobile, usually in
the center console area. The device should be mounted with a plastic bracket to minimize
shadowing of the internal antenna. Due to the low power at which the unit transmits
(0.0025 W max.), placement from an SAR perspective is not critical.
All module installations are performed by the vehicle manufacturer. No end-user
installation is involved. Any unauthorized changes or modifications not expressly
approved by Motorola could void the user’s authority to operate this equipment.
3. I/O CONNECTION:
A cable mounted 20-pin female automotive connector is utilized to provide power
and vehicle bus communications. This connector will only mate with a corresponding
connector in the vehicle’s prewire.
4. SPECIFICATIONS:
?? Frequency range:
2402 MHz – 2480 MHz
?? Operating current:
1.5A nominal
?? Operating voltage:
13.2V nominal
?? Operating temp. range:
-30?C to +70?C
?? Storage temp. range:
-40?C to +85?C
?? Output power:
0.0025 W max
MOTOROLA INC
FCC ID: IHDT56CP1
IN-CABIN BLUETOOTH MODULE USER MANUAL
[Model# SYN9592A and cable length variants]
1. GENERAL:
The In-Cabin Bluetooth Module facilitates a wireless Bluetooth interface between
an in- vehicle control unit and other Bluetooth-enabled devices (such as a laptop PC, a
handset, etc.).
2. ANTENNA AND MODULE INSTALLATION:
The module utilizes an internal, pc board mounted, chip antenna. The unit is
designed for installation within the passenger compartment of an automobile, usually in
the center console area. The device should be mounted with a plastic bracket to minimize
shadowing of the internal antenna. Due to the low power at which the unit transmits
(0.0025 W max.), placement from an SAR perspective is not critical.
All module installations are performed by the vehicle manufacturer. No end-user
installation is involved. Any unauthorized changes or modifications not expressly
approved by Motorola could void the user’s authority to operate this equipment.
3. I/O CONNECTION:
A cable mounted 20-pin female automotive connector is utilized to provide power
and vehicle bus communications. This connector will only mate with a corresponding
connector in the vehicle’s prewire.
4. SPECIFICATIONS:
?? Frequency range:
2402 MHz – 2480 MHz
?? Operating current:
1.5A nominal
?? Operating voltage:
13.2V nominal
?? Operating temp. range:
-30?C to +70?C
?? Storage temp. range:
-40?C to +85?C
?? Output power:
0.0025 W max

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 0000:00:00 00:00:00Z
Modify Date                     : 2002:10:02 08:04:57-04:00
Page Count                      : 2
Creation Date                   : 
Author                          : wek002
Producer                        : Acrobat PDFWriter 4.0 for Windows NT
Mod Date                        : 2002:10:02 08:04:57-04:00
Metadata Date                   : 2002:10:02 08:04:57-04:00
Title                           : Exh D1 ICBM_antenna_install_instrsl.PDF
Creator                         : wek002
EXIF Metadata provided by EXIF.tools
FCC ID Filing: IHDT56CP1

Navigation menu