Motorola Mobility T6EG1 GSM PCMCIA Card User Manual UG C330 GSM

Download:
Mirror Download [FCC.gov]
Document ID	473265
Application ID	C4fYSieorz6BgGSd/u8Yvw==
Document Description	Exhibit 8 Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	167.07kB (2088368 bits)
Date Submitted	2004-09-27 00:00:00
Date Available	2004-09-27 00:00:00
Creation Date	2004-08-27 17:04:07
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-08-27 17:06:04
Document Title	UG.C330.GSM.book
Document Creator	FrameMaker 5.5.6p145
Document Author:	bertrand

APPLICANT: MOTOROLA, INC.
FCC ID: IHDT6EG1
INSTRUCTION MANUAL
A preliminary draft copy of the Users Manual follows:
EXHIBIT 8
Operation Guide
D1000 PCMCIA
CARD
68P02974C25-O
68P02974C25-O
@6802974C25@
July 2004
DRAFT (01.08.04)
Disclaimer
Statements included in this manual indicating support provided by Motorola are subject to changes at any time.
Motorola reserves the right to make changes to this manual.
Regulatory Requirements
The Federal Communications Commission (FCC) requires
application for certification of digital devices in accordance
with CFR Title 47, Part 2 and Part 15. This includes Electromagnetic Energy Exposure (EME) testing. As the D1000
PCMCIA modem is not a stand-alone transceiver but is a
PC card, the D1000 cannot be tested by itself for EME certification and was tested while it is inserted in a Laptop Personal Computer.
Regulatory Statement
The following safety precautions must be observed during
all phases of the operation, usage, service or repair of any
D1000 modem.
Users of the D1000 modem are advised to convey the following safety information to users and operating personnel
supplied with the product. Failure to comply with these precautions violate safety standards of design, manufacture
and intended use of the product. Motorola assumes no liability for customer failure to comply with these precautions.
1. The D1000 must not be mechanically nor electrically
changed.
2. The D1000 has been designed the meet the EMC
requirements of ETS 300 342.
3. The D1000 meets the safety requirements of EN60950.
4. Systems using the D1000 will be subject to mandatory
EMC testing under directive 89/336/EEC.
THIS RADIO PRODUCT MEETS THE
GOVERNMENT'S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Your wireless radio product is a radio transmitter and
receiver. It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the
U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless
mobile phones employs a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6W/kg.* Tests for SAR are conducted
ii
using standard operating positions reviewed by the FCC
with the device transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual
SAR level of the device while operating can be well below
the maximum value. This is because the radio device is
designed to operate at multiple power levels so as to use
only the power required to reach the network. In general,
the closer you are to a wireless base station antenna, the
lower the power output. Before a radio product is available
for sale to the public, it must be tested and certified to the
FCC that is does not exceed the limit established by the
government-adopted requirement for safe exposure. The
tests are performed in positions and locations (e.g. at the ear
and worn on the body) as required by FCC for each model.
The highest SAR value for this radio product when tested
for use during packet data is 1.52 W/kg. The FCC has
granted an Equipment Authorization for this model phone
with the FCC and can be found under the Display Grant
section of http:/ /www.fcc.gov/oet/fccid after searching on
FCC ID IHDT6EG1. The standard incorporates a substantial margin of safety to give with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on file
web-site at http://www.wow-com.com. Additional information on Specific Absorption Rates (SAR) can be found on
the Cellular Telecommunications Industry Association
(CTIA) * In the United States and Canada, the SAR limit
for mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. additional protection for
the public and to account for any variations in measurements.
Safety and General Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION
BEFORE USING YOUR RADIO PRODUCT.
The information provided in this document supersedes the
general safety information in user's guides published prior
to December 1, 2002.
Exposure To Radio Frequency (RF) Energy
Your phone contains a transmitter and a receiver. When it is
ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call
controls the power level at which your phone transmits.
Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure
of human beings to RF energy.
Operational Precautions
To assure optimal phone performance and make sure
human exposure to RF energy is within the guidelines set
DRAFT (01.08.04)
forth in the relevant standards, always adhere to the following procedures.
External Antenna Care
• Use only the supplied or Motorola-approved replacement antenna. Unauthorized antennas, modifications,
or attachments could damage the phone.
• When using any approved accessory antenna, position
it at least eight inches (20cm) from any part of any person.
DO NOT hold the external antenna when the phone is IN
USE. Holding the external antenna affects call quality and
may cause the phone to operate at a higher power level than
needed. In addition, use of unauthorized antennas may
result in non-compliance with the local regulatory requirements in your country.
PC Card Operation
IMPORTANT: After using the D1000 make sure to perform a proper shut down within the software, while allowing the metal portion of the PC card to cool down. When
ejecting the PC card immediately after use, make sure to
hold the D1000 by the plastic portion and avoid holding the
PC card by it's metal portion.
Approved Accessories
Use of accessories not approved by Motorola, including but
not limited to batteries and antennas, may cause your phone
to exceed RF energy exposure guidelines. For a list of
approved Motorola accessories, visit our website at
www.Motorola.com.
RF Energy Interference/Compatibility
NOTE: Nearly every electronic device is susceptible to RF
energy interference from external sources if inadequately
shielded, designed, or otherwise configured for RF energy
compatibility. In some circumstances your phone may
cause interference.
Facilities
Turn off your phone in any facility where posted notices
instruct you to do so. These facilities may include hospitals
or health care facilities that may be using equipment that is
sensitive to external RF energy.
Aircraft
•
•
•
•
ALWAYS keep the phone more than 6 inches (15 centimeters) from your pacemaker when the phone is
turned ON.
NOT carry the phone in the breast pocket.
Use the ear opposite the pacemaker to minimize the
potential for interference.
Turn OFF the phone immediately if you have any reason to suspect that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to
consult your hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from RF energy. Your physician may be able to
assist you in obtaining this information.
OPERATIONAL WARNINGS
For Vehicles With an Air Bag
Do not place a phone in the area over an air bag or in the air
bag deployment area. Air bags inflate with great force. If a
phone is placed in the air bag deployment area and the air
bag inflates, the phone may be propelled with great force
and cause serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a potentially explosive atmosphere. Do not remove, install, or
charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in
bodily injury or even death.
Note: The areas with potentially explosive atmospheres
referred to above include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities,
areas where the air contains chemicals or particles, such as
grain, dust, or metal powders. Areas with potentially explosive atmospheres are often but not always posted.
Blasting Caps And Areas
When instructed to do so, turn off your phone when on
board an aircraft. Any use of a phone must be in accordance
with applicable regulations per airline crew instructions.
To avoid possible interference with blasting operations,
turn OFF your phone when you are near electrical blasting
caps, in a blasting area, or in areas posted "Turn off electronic devices." Obey all signs and instructions.
Medical Devices
Batteries
Pacemakers
Batteries can cause property damage and/or bodily injury
such as burns if a conductive material such as jewelry,
keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short
circuit) and become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside a
Pacemaker manufacturers recommend that a minimum separation of 6 inches (15 centimeters) be maintained between
a handheld wireless phone and a pacemaker.
Persons with pacemakers should:
DRAFT (01.08.04)
iii
pocket, purse, or other container with metal objects. Use
only Motorola original batteries and chargers.
the Product since it was delivered. This warranty will
expire at the end of the Warranty Term.
Your battery or phone may contain symbols, defined as follows:
This is the complete and exclusive warranty for a Motorola
Personal Communicator and accessories and in lieu of all
other warranties, terms and conditions, whether express or
implied.
Where you purchase the product other than as a consumer,
Motorola disclaims all other warranties, terms and conditions express or implied, such as fitness for purpose and satisfactory quality.
In no event shall Motorola be liable for damages nor loss of
data in excess of the purchase price nor for any incidental
special or consequential damages* arising out of the use or
inability to use the Product, to the full extent such may be
disclaimed by law.
Symbol
Definition
Important safety information will follow.
Your battery or phone should not be disposed of in a fire.
Your battery or phone may require recycling in accordance with local laws. Contact your local regulatory authorities for
more information.
Your battery or phone should not be
thrown in the trash.
Your phone contains an internal lithiumion battery.
This Warranty does not affect any statutory rights that you
may have if you are a consumer, such as a warranty of satisfactory quality and fit for the purpose for which products of
the same type are normally used under normal use and service, nor any rights against the seller of the Products arising
from your purchase and sales contract.
(*) including without limitation loss of use, loss of time,
loss of data, inconvenience, commercial loss, lost profits or
savings.
Warranty Information
How To Get Warranty Service?
Motorola guarantees to you, the original purchaser, the Personal Communicator and accessories which you have purchased from an authorised Motorola dealer (the
"Products"), to be in conformance with the applicable
Motorola specifications current at the time of manufacture
for a term of [2] years from date of purchase of the Product(s) (Warranty Term).
You must inform Motorola of the lack of conformity to the
applicable specifications of any of the Products within a
period of two (2) months from the date on which you detect
a defect in material, workmanship or lack of conformity
and in any event within a term not to exceed the Warranty
Term, and must immediately submit the Product for service
to Motorola's Authorised Repair or Service Centre. Motorola shall not be bound by Product related statements not
directly made by Motorola nor any warranty obligations
applicable to the seller.
A list of the Motorola Call Centre numbers is enclosed with
this Product.
In most cases the authorised Motorola dealer which sold
and/or installed your Motorola Personal Communicator and
original accessories will honour a warranty claim and/or
provide warranty service. Alternatively, for further information on how to get warranty service please contact either
the customer service department of your service provider or
Motorola's call centre at the telephone numbers below for
your country.
Where, in the Country of purchase, there is a statutory
requirement to provide extended repair service to consumers beyond the first year of purchase this warranty will be
provided by Motorola Authorised Service Centres or
Motorola directly appointed dealers in the country of purchase according to the terms of this warranty information
document. However, please note that you will be referred
back to the place of purchase, if the Motorola Dealer has
purchased the product directly from Motorola, in the country of purchase of in a country where Motorola is not
required to support supplementary repair service during the
second year of purchase because of the statutory obligations
that may apply to the seller or importer of the product, but
not to the manufacturer, to provide an extended warranty to
consumers beyond the first year.
During the Warranty term, Motorola will, at its discretion
and without extra charge, as your exclusive remedy, repair
or replace your Product which does not comply with this
warranty; or failing this, to reimburse the price of the Product but reduced to take into account the use you have had of
iv
Claiming
In order to claim the warranty service you must return the
Personal Communicator and/or accessories in question to
DRAFT (01.08.04)
Motorola's Authorised Repair or Service Centre in the original configuration and packaging as supplied by Motorola.
Please avoid leaving any supplementary items like SIM
cards. The Product should also be accompanied by a label
with your name, address, and telephone number; name of
operator and a description of the problem. In the case of
vehicular installation, the vehicle in which the Personal
Communicator is installed should be driven to the Authorised Repair or Service Centre, as analysis of any problem
may require inspection of the entire vehicular installation.
In order to be eligible to receive warranty service, you must
present your receipt of purchase or a comparable substitute
proof of purchase bearing the date of purchase. The phone
should also clearly display the original compatible electronic serial number (IMEI) and mechanic serial number
[MSN]. Such information is contained with the Product.
When the Product is used in conjunction with ancillary or
peripheral equipment not supplied by Motorola, Motorola
does not warrant the operation of the Product/peripheral
combination and Motorola will not honour any warranty
claim where the Product is used in such a combination and
it is determined by Motorola that there is no fault with the
Product. Motorola specifically disclaims any responsibility
for any damage, whether or not to Motorola equipment,
caused in any way by the use of the Personal Communicator, accessories, software applications and peripherals (specific examples include, but are not limited to: batteries,
chargers, adapters, and power supplies) when such accessories ,software applications and peripherals are not manufactured and supplied by Motorola.
You must ensure that all and any repairs or servicing is handled at all times by a Motorola Authorised Service Centre
in accordance with the Motorola Service requirements
This warranty is not valid if the defects are due to damage,
misuse, tampering, neglect or lack of care and in case of
alterations or repair carried out by unauthorised persons.
In some cases, you may be requested to provide additional
information concerning the maintenance of the Products by
Motorola Authorised Service Centres only, therefore it is
important to keep a record of any previous repairs, and
make them available if questions arise concerning maintenance
The following are examples of defects or damage not covered by this product warranty
1. Defects or damage resulting from use of the Product in
other than its normal and customary manner.
2. Defects or damage from misuse, access to incompatible sources, accident or neglect.
3. Defects or damage from improper testing, operation,
maintenance, installation, adjustment, unauthorised
software applications or any alteration or modification
of any kind.
4. Breakage or damage to antennas unless caused directly
by defects in material or workmanship.
5. Products disassembled or repaired other than by
Motorola in such a manner as to adversely affect performance or prevent adequate inspection and testing to
verify any warranty claim.
6. Defects or damage due to range, coverage, availability,
grade of service, or operation of the cellular system by
the cellular operator.
7. Defects or damage due to moist, liquid or spills of
food.
8. Control unit coil cords in the Product that are stretched
or have the modular tab broken.
9. All plastic surfaces and all other externally exposed
parts that are scratched or damaged due to customer
normal use.
10. Leather cases (which are covered under separate manufacturer's warranties).
11. Products rented on a temporary basis.
12. Periodic maintenance and repair or replacement of
parts due to normal wear and tear.
Conditions
This warranty will not apply if the type or serial numbers
on the Product has been altered, deleted, duplicated,
removed, or made illegible. Motorola reserves the right to
refuse free-of-charge warranty service if the requested documentation can not be presented or if the information is
incomplete, illegible or incompatible with the factory
records.
Repair, at Motorola's option, may include reflashing of
software, the replacement of parts or boards with functionally equivalent, reconditioned or new parts or boards.
Replaced parts, accessories, batteries, or boards are warranted for the balance of the original warranty time period.
The Warranty Term will not be extended. All original
accessories, batteries, parts, and Personal Communicator
equipment that have been replaced shall become the property of Motorola. Motorola does not warrant the installation, maintenance or service of the products, accessories,
batteries or parts.
Motorola will not be responsible in any way for problems
or damage caused by any ancillary equipment not furnished
by Motorola which is attached to or used in connection with
the Products, or for operation of Motorola equipment with
any ancillary equipment and all such equipment is
expressly excluded from this warranty.
What Is Not Covered By The Warranty
Depending on operating conditions and your usage habits,
wear and tear might take place of components including
mechanical problems related to Product housing, paint,
DRAFT (01.08.04)
assembly, sub-assemblies, displays and keyboards and any
accessories which are not part of the Product's in-box configuration. The rectification of faults generated through
wear and tear and the use of consumable items like batteries
beyond their Optimum Performance Time as indicated in
the product manual is considered to be your responsibility
and therefore Motorola will not provide the free Warranty
repair service for these items
Please note if you have downloaded material onto your
Product, for example ring tones, ring tunes, screensavers,
wallpaper, games etc these may be deleted or erased as part
of the repair process or testing process. Motorola shall not
be responsible for such matters. The repair or testing process should not affect any such material that was installed by
Motorola on your Product as a standard feature.
Installed Data
If you request Motorola to repair your Product any time
after the Warranty term or where this warranty does not
apply due to the nature of the defect or fault, then Motorola
may in its discretion carry out such repairs subject to you
paying Motorola its fees for such a repair or it may refer
you to an authorised third party to carry out such repairs.
Please make and retain a note of all data you have inserted
into your Product for example names, addresses, phone
numbers, user and access codes, notes etc before submitting
your Product for a Warranty service as such data may be
deleted or erased as part of the repair or service process.
vi
Out Of Warranty Repairs
DRAFT (01.08.04)
D1000 Operation Guide
Contents
PREFACE
Scope of this Manual........................................................................................... 9
Arrangement of This Manual .............................................................................. 9
CHAPTER 1 - INTRODUCTION
General Description .......................................................................................... 11
D1000 Performance Specifications................................................................... 12
CHAPTER 2 - INSTALLATION AND OPERATION
Your Package Contents .....................................................................................
Getting to Know Your D1000 PCMCIA Card..................................................
Inserting a SIM Card Into your D1000 .............................................................
Installing the D1000 on a Laptop Computer.....................................................
Removing the D1000 from a Laptop Computer ...............................................
Removing a SIM Card from your D1000 .........................................................
13
13
14
15
16
16
vii
DRAFT (01.08.04)
This page left blank intentionally
viii
DRAFT (01.08.04)
D1000 Operation Manual - Preface
Preface
Scope of this Manual
This manual provides instructions for the operation of the D1000 PCMCIA Card.
Arrangement of This Manual
This manual is arranged as follows:
•
•
•
Preface - Contains the scope of the manual and its arrangement.
Chapter 1-Introduction - Gives a general description of the D1000 and its specifications.
Chapter 2-Installation and Operation - Gives information about the your D1000 package content and instructions that will enable you to use your D1000.
DRAFT (01.08.04)
Preface
This page left blank intentionally
10
DRAFT (01.08.04)
D1000 Operation Manual - Chapter 1 - Introduction
Chapter 1 - Introduction
General Description
The D1000 is a 3G PCMCIA Card. It is an extended Type II PCMCIA Card, providing high speed data
connections via cellular networks. It provides mobile user connection speeds comparable to wired
ADSL connections. Additionally, the earpiece supplied with the card enables the user to enjoy D1000
voice capabilities.
As a 3G product, the D1000 complies with all key specifications as defined by the 3GPP. Key product
features are:
• UMTS: WCDMA 2100, GSM 900/1800 and 1900-MHz Tri-band technology.
• GPRS High speed packet data (21 kbps UL, 84 kbps DL).
• WCDMA High speed packet data (64kbps UL, 384 kbps DL).
• 16MB Integrated Flash Memory.
• Integrated earpiece jack.
• External antenna support.
A general view of the D1000 is given in Figure 1.
Figure 1. D1000 PCMCIA Card - General View
11
DRAFT (01.08.04)
Chapter 1 - Introduction
D1000 Performance Specifications
Frequency Bands Supported:
WCDMA2100
TX 1920 to 1980 MHz, RX 2110 to 2170 MHz
GSM 900/1800 and 1900 MHz
TX 880 to 915 MHz, RX 925 to 960 MHz
TX 1710 to 1785 MHz, RX 1805 to 1880 MHz
TX 1850 to 1910 MHz, RX 1930 to 1990 MHz
TX Output Power:
WCDMA
+21 dBm
GSM900, GSM1800/1900
+33 dBm, +30 dBm
Operating Temperature:
0 to +55 degrees Celsius
RX Sensitivity:
WCDMA
<-106.7 dBm
GSM900, GSM1800/1900
<-104 dBm, <-104 dBm
•
•
Relative Humidity:
Less than 1% BER for WCDMA
Less than 2% for GSM
50 degrees Celsius 95% RH (non condensing 8 hours)
12
DRAFT (01.08.04)
D1000 Operation Guide - Chapter 2 - Installation and Operation
Chapter 2 - Installation and Operation
Your Package Contents
Verify that your D1000 package contains the following:
Item #
Item Description
Part Number
Quantity
D1000 PCMCIA Card
F3024AA
Earpiece
SYN8419B
mPT CD-ROM
9986141U08
Getting to Know Your D1000 PCMCIA Card
Figure 2 gives a detailed description of the D1000 PCMCIA card:
Figure 2. D1000 Detailed Description
13
DRAFT (01.08.04)
Chapter 2 - Installation and Operation
Inserting a SIM Card Into your D1000
Before installing the D1000 into your Laptop computer, insert a SIM card into the D1000
(see Figure 3):
1. Hold the D1000 with the bottom side up (facing you).
2. Insert a SIM card into the dedicated slot. Verify you insert the card according to the markings on
the bottom cover and that the golden plated side of the SIM is facing down.
3. Gently push the SIM card until it is fully inserted into slot.
Figure 3. Inserting a SIM Card
14
DRAFT (01.08.04)
D1000 Operation Guide - Chapter 2 - Installation and Operation
Installing the D1000 on a Laptop Computer
NOTE
Before installing your D1000 on a Laptop computer, verify
that the Motorola Phone Tool (mPT) application is installed
on the Laptop.
Perform the following steps (see Figure 4):
1. Gently insert the D1000 into the PCMCIA slot. Verify that the D1000 is sliding along the guides.
2. Push the D1000 into the Laptop PCMCIA connector.
3. Open the antenna and verify that the indicator LED illuminates.
Figure 4. Installing the D1000 on a Laptop Computer
15
DRAFT (01.08.04)
Chapter 2 - Installation and Operation
Removing the D1000 from a Laptop Computer
Perform the following steps (see Figure 4):
1. Press and release the PCMCIA release button to extend it out.
2. Press the PCMCIA release button again to release the D1000.
3. Gently pull the card out from the slot.
Removing a SIM Card from your D1000
Perform the following steps (see Figure 5):
1. Insert a Ball-tip pen or a mini flap-tip screwdriver into the SIM card release slot.
2. Gently push the SIM card out from the D1000.
3. Using your fingers, pull the SIM card fully out from the D1000.
Figure 5. Removing a SIM Card
16
DRAFT (01.08.04)
DRAFT (01.08.04)
MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and
Trademark Office. All other product or service names are the property of their
respective owners.
© Motorola, Inc. 2004
68P02974C25-O
@6802974C25@
July 2004
DRAFT (01.08.04)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 19
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e05f1c8d-85eb-4258-a2ff-8cfe39d8b17d
Modify Date                     : 2004:08:27 17:06:04-05:00
Create Date                     : 2004:08:27 17:04:07-05:00
Metadata Date                   : 2004:08:27 17:06:04-05:00
Document ID                     : uuid:f8b8c1f6-d52c-4438-8aba-fd4a915e102e
Format                          : application/pdf
Title                           : UG.C330.GSM.book
Creator                         : FrameMaker 5.5.6p145
Author                          : bertrand
Producer                        : Acrobat Distiller 5.0.5 (Windows)

EXIF Metadata provided by EXIF.tools