Motorola Mobility T6KX1 Bluetooth Wireless Headset User Manual Shasta QSG

Motorola Mobility LLC Bluetooth Wireless Headset Shasta QSG

User manual

headset statusproblems?pair & connectcharge it put it on receive calls make calls while on a callGetting Started GuideMotorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.hellomoto.com1-877-MOTOBLU1-888-390-6456 (TTY/TDD United States for hearing impaired)Guide Number: 6809500A86-OMOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © 2009 Motorola, Inc. All rights reserved.Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.motorola.com1-877-MOTOBLU1-888-390-6456 (TTY/TDD United States for hearing impaired)Guide Number: 68000201945-A (DRAFT 1)Bluetooth QD ID:Bxxxxxx MOTOPURE™ Hxx (Shasta) congratulations! your headset basics Congratulations!Congratulations on your purchase of the cool MOTOPURE™ Hxx Bluetooth® Handsfree Headset. Instead of traditional microphone technology, your MOTOPURE™ Hxx captures bone vibrations in the ear canal when you talk and transforms them into audible sound while reducing background noises in the environment. Whether you use one or two phones, the MOTOPURE™ Hxx can also connect to both simultaneously. With the use of voice prompts, operating your headset is easy.First follow the easy steps in this guide to get your handsfree headset charged and talking to your phone. Then learn how to wear and use your handsfree headset with this handy guide that’s easy to take along with you.If you’d like even more information about how to use your new MOTOPURE™ Hxx Bluetooth® Handsfree Headset, visit www.motorola.com/Bluetoothsupport.So, let’s go!Caution: Before using your headset, read the important safety and legal information pamphlet and follow its instructions.ChargingPortEarhookVolumeButtonsCrystal TalkMicrophonePowerSwitchMicrophone Mode ButtonIndicatorLightCall ButtonSpeaker andBone ConductionMicrophonecharging batteryYou’ll need to charge your headset before using it. Plug the charger into the charging port on your headset and a wall outlet. The indicator light will turn red or yellow while charging. When the battery is fully charged, the indicator light turns green.Disconnect the headset from your charger when charging is complete.Note: Your battery is designed to last the life of your headset. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headset.pairing and connectingOnce charged, get your headset connected to up to two phones.connect with your first phone “phone 1” 1Turn off any Bluetooth devices previously paired (linked) with your headset.2Turn on the Bluetooth feature on your phone.3Turn on your headset by sliding the Power switch to ON (orange not showing).The indicator light becomes steadily lit in blue and you hear “ready to pair”.4Follow voice prompts to connect your phone to your headset.When your headset successfully pairs with your phone, you hear “pairing complete”. When connected, you hear “phone 1 connected” and see the indicator light rapidly flash in red and purple.connect with your second phone “phone 2” (optional) 1Turn off first phone and any other Bluetooth devices previously paired (linked) with your headset.2Turn your headset off by sliding the Power switch to OFF (orange showing).3Turn on the Bluetooth feature on your phone.4Turn on your headset by sliding the Power switch to ON (orange not showing).The indicator light becomes steadily lit in blue.5Follow voice prompts to connect your phone to your headset.When your headset successfully pairs and connects with your phone, you hear “pairing complete”. When connected, you hear “phone 2 connected” and see the indicator light rapidly flash in red and purple.am i connected?To confirm connection to your phones: 1Place the headset over your ear (see “put it on” for help).2One phone at a time, dial the number you want to call and press Call or Send key on your phone.If your phone and headset are successfully paired, you will hear ringing on the headset.will I need to do this every time?No. After initially pairing your phone(s) and headset, you don’t need to do it again.For daily use, just make sure that your headset is ON and that your phone’s Bluetooth feature is ON. Your headset and phone will connect automatically!My headset will not enter pairing mode.Make sure that any devices previously paired with your headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then turn the headset off and on. The indicator light becomes steadily lit in blue and you hear “ready to pair”.My phone doesn’t find my headset when searching.Make sure the indicator light on your headset is steadily lit in blue when your phone is searching for devices. If not, press and hold the Call button and both Volume buttons until you hear “ready to pair” and see the indicator light steadily lit in blue.My headset will not pair with my phone.If the indicator light is not steadily lit in blue when your phone is searching for your headset, you can reset the headset by pressing and holding the Call button and both Volume buttons until the indicator light is steadily lit in blue. Then follow the pair & connect instructions in this guide.My headset connected before, but now it’s not.Make sure the indicator light on your headset is steadily lit in blue when your phone is searching for devices. If not, press and hold the Call and both Volume buttons until you hear “ready to pair” and see the indicator light steadily lit in blue.Support.If you need more help, contact us at 1-877-MOTOBLU or visit us at www.motorola.com/Bluetoothsupport.choose an earYour headset comes ready for the right ear. To change for the left ear:wear it 1Insert headset earpiece into your ear canal.212Ensure bone conduction microphone is in contact with your ear canal.3Flex the ear hook and loop it over your ear.Tip: For optimal audio performance and comfort, be sure to point the headset as shown.Ear canalMicrophoneturn on & offSlide the Power switch. When the headset is turned on, no orange is shown under the switch.check battery levelPress both Volume buttons while not on a call.turn voice prompts on & offPress either Volume button and the Call button while not on a call. You hear the current voice prompt status (“voice prompt on” or “voice prompt off”).indicator lightvoice prompt available talk timeRed “battery level is low”less than 2 hours Yellow “battery level is medium”between 2 and 4.5 hoursGreen “battery level is high”more than 4.5 hoursWhen you receive a call, the indicator light flashes in blue (for phone 1) or purple (for phone 2), and you hear call on phone 1 (or “phone 2”) and a ringtone over your headset.answer a callPress the Call button.reject a callPress and hold either Volume button. You hear “call ignored”. \make a voice dial call 1Press the Call button and you hear “voice dial”. You are prompted on how to make the call:•“press Call button for phone 1”•“press Call button and either Volume button for phone 2”2Press the button(s) as prompted. For phone 2, make sure to press the Call button and either Volu me button at the same time.3After the tone, clearly speak the name of the contact you want to call.redial last call 1Press and hold the Call button and you hear “last number redial”. You are prompted how to make the call:•“press Call button for phone 1”•“press Call button and either Volume button for phone 2”2Press the button(s) as prompted. For phone 2, make sure to press the Call button and either Volu me button at the same time.mute & unmute a callPress and hold both Volume buttons until you hear “mute on” or “mute off”.end a callPress the Call button. If a call is on hold, you hear “phone 1 (or “phone 2”) audio retrieved” and the call is reconnected to your headset.second incoming call •To answer, press the Call button. You hear “phone 1 (or “phone 2”) audio placed on hold” and the active call is placed on hold.•To ignore, press and hold either Volume button until you hear a tone.•To retrieve a call on hold, press the Call button. You hear “retrieve held call”, then “press Call button for phone 1” and “press Call button and either Volume button for phone 2”.Press the button(s) as prompted. For phone 2, make sure to press the Call button and either Volume button at the same time.turn bone conduction feature on & offPress Noise Reduction button while on a call. You hear the current feature status (“bone conduction on” or “bone conduction off”).indicator light statusOff Power offThree blue flashes Powering on/offSteady blue Pairing modeQuick blue flash Incoming call on phone 1Quick purple flash Incoming call on phone 2Slow blue pulse On a callSlow blue flash Standby (connected to one phone)Slow green flash Standby (connected to two phones)Slow red flash Idle (not connected to any phone)Slow purple pulse Call mutedQuick red flash Low batteryShasta_QSG.fm Page 1 Monday, January 26, 2009 12:05 AM
headset statusproblems?pair & connectcharge it put it on receive calls make calls while on a callGetting Started GuideMotorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.hellomoto.com1-877-MOTOBLU1-888-390-6456 (TTY/TDD United States for hearing impaired)Guide Number: 6809500A86-OMOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © 2009 Motorola, Inc. All rights reserved.Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.motorola.com1-877-MOTOBLU1-888-390-6456 (TTY/TDD United States for hearing impaired)Guide Number: 68000201945-A (DRAFT 1)Bluetooth QD ID:Bxxxxxx MOTOPURE™ Hxx (Shasta) congratulations! your headset basicsShasta_QSG.fm Page 2 Monday, January 26, 2009 12:05 AM

Navigation menu