Motorola Mobility T6KX1 Bluetooth Wireless Headset User Manual Shasta QSG

Download:
Mirror Download [FCC.gov]
Document ID	1080795
Application ID	weJ/haoPG6bRdwL600ojeg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	82.77kB (1034567 bits)
Date Submitted	2009-03-15 00:00:00
Date Available	2009-09-12 00:00:00
Creation Date	2007-07-13 11:43:39
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-03-11 16:44:06
Document Title	Shasta_QSG.fm
Document Creator	FrameMaker 7.2
Document Author:	Rick

Shasta_QSG.fm Page 1 Monday, January 26, 2009 12:05 AM
congratulations!
charge it
your headset
Congratulations on your purchase of the cool
MOTOPURE™ Hxx Bluetooth® Handsfree Headset.
You’ll need to charge your headset before using it.
Plug the charger into the charging port on your
headset and a wall outlet.
Congratulations!
charging battery
Earhook
Instead of traditional microphone technology, your
MOTOPURE™ Hxx captures bone vibrations in the
ear canal when you talk and transforms them into
audible sound while reducing background noises in
the environment.
MOTOPURE™
Hxx (Shasta)
Speaker and
Bone Conduction
Microphone
Charging
Port
Whether you use one or two phones, the
MOTOPURE™ Hxx can also connect to both
simultaneously. With the use of voice prompts,
operating your headset is easy.
Disconnect the headset from your charger when
charging is complete.
Crystal Talk
Microphone
Indicator
Light
© 2009 Motorola, Inc. All rights reserved.
devices previously paired (linked) with your
headset.
Turn your headset off by sliding the Power
switch to OFF (orange showing).
Turn on the Bluetooth feature on your phone.
Turn on the Bluetooth feature on your phone.
Turn on your headset by sliding the Power
switch to ON (orange not showing).
Follow voice prompts to connect your phone to
your headset.
When your headset successfully pairs with your
phone, you hear “pairing complete”. When
connected, you hear “phone 1 connected” and see
the indicator light rapidly flash in red and purple.
Note: Your battery is designed to last the life of your
headset. It should only be removed by a recycling
facility. Any attempt to remove or replace your
battery will damage your headset.
basics
Your headset comes ready for the right ear. To
change for the left ear:
Ensure bone conduction microphone is in
contact with your ear canal.
Microphone
turn on & off
Slide the Power switch. When the headset is turned
on, no orange is shown under the switch.
check battery level
Turn on your headset by sliding the Power
switch to ON (orange not showing).
The indicator light becomes steadily lit in blue.
Follow voice prompts to connect your phone to
your headset.
When your headset successfully pairs and connects
with your phone, you hear “pairing complete”.
When connected, you hear “phone 2 connected”
and see the indicator light rapidly flash in red and
purple.
reject a call
Press and hold either Volume button. You hear “call
ignored”.
“battery level is
low”
less than 2 hours
Yellow
“battery level is
medium”
between 2 and 4.5
hours
“battery level is
high”
more than 4.5
hours
Green
make calls
while on a call
make a voice dial call
1 Press the Call button and you hear “voice dial”.
mute & unmute a call
You are prompted on how to make the call:
am i connected?
To confirm connection to your phones:
Place the headset over your ear (see “put it on”
for help).
One phone at a time, dial the number you want
to call and press Call or Send key on your
phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
will I need to do this every time?
No. After initially pairing your phone(s) and headset,
you don’t need to do it again.
For daily use, just make sure that your headset is ON
and that your phone’s Bluetooth feature is ON. Your
headset and phone will connect automatically!
sure to point the headset as shown.
status
Off
Power off
Three blue flashes
Powering on/off
Pairing mode
•
“press Call button and either Volume
button for phone 2”
Press the Call button. If a call is on hold, you hear
“phone 1 (or “phone 2”) audio retrieved” and the
call is reconnected to your headset.
Steady blue
Quick blue flash
Incoming call on
phone 1
second incoming call
Quick purple flash
Incoming call on
phone 2
Slow blue pulse
On a call
Slow blue flash
Standby (connected to
one phone)
Slow green flash
Standby (connected to
two phones)
Slow red flash
Idle (not connected to
any phone)
Press the button(s) as prompted. For phone 2,
make sure to press the Call button and either
Volume button at the same time.
After the tone, clearly speak the name of the
contact you want to call.
redial last call
1 Press and hold the Call button and you hear
“last number redial”. You are prompted how to
make the call:
turn voice prompts on & off
Tip: For optimal audio performance and comfort, be
indicator light
end a call
•
•
headset status
“press Call button for phone 1”
Press either Volume button and the Call button while
not on a call. You hear the current voice prompt
status (“voice prompt on” or “voice prompt off”).
Press and hold both Volume buttons until you hear
“mute on” or “mute off”.
“press Call button for phone 1”
“press Call button and either Volume
button for phone 2”
Press the button(s) as prompted. For phone 2,
make sure to press the Call button and either
Volume button at the same time.
•
•
•
To answer, press the Call button. You hear
“phone 1 (or “phone 2”) audio placed on
hold” and the active call is placed on hold.
To ignore, press and hold either Volume button
until you hear a tone.
To retrieve a call on hold, press the Call button.
You hear “retrieve held call”, then “press Call
button for phone 1” and “press Call button
and either Volume button for phone 2”.
Press the button(s) as prompted. For phone 2,
make sure to press the Call button and either
Volume button at the same time.
turn bone conduction feature on & off
Press Noise Reduction button while on a call. You
hear the current feature status (“bone conduction
on” or “bone conduction off”).
My headset will not enter pairing
mode.
light is steadily lit in blue. Then follow the pair &
connect instructions in this guide.
Make sure that any devices previously paired with
your headset are turned off. If the indicator light is
flashing in blue, first turn off the other device, then
turn the headset off and on. The indicator light
becomes steadily lit in blue and you hear “ready to
pair”.
My headset connected before, but now
it’s not.
My phone doesn’t find my headset
when searching.
Make sure the indicator light on your headset is
steadily lit in blue when your phone is searching for
devices. If not, press and hold the Call button and
both Volume buttons until you hear “ready to pair”
and see the indicator light steadily lit in blue.
My headset will not pair with my
phone.
If the indicator light is not steadily lit in blue when
your phone is searching for your headset, you can
reset the headset by pressing and holding the Call
button and both Volume buttons until the indicator
•
Press the Call button.
available talk time
Red
Ear canal
Flex the ear hook and loop it over your ear.
voice prompt
When you receive a call, the indicator light flashes in
blue (for phone 1) or purple (for phone 2), and you
hear call on phone 1 (or “phone 2”) and a ringtone
over your headset.
answer a call
Press both Volume buttons while not on a call.
indicator
light
receive calls
Bluetooth QD ID:Bxxxxxx
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
connect with your second phone
“phone 2” (optional)
1 Turn off first phone and any other Bluetooth
Microphone Mode Button
put it on
wear it
1 Insert headset earpiece into your ear canal.
problems?
The indicator light becomes steadily lit in blue
and you hear “ready to pair”.
Call
Button
So, let’s go!
The indicator light will turn red or yellow while
charging. When the battery is fully charged, the
indicator light turns green.
If you’d like even more information about how to use
your new MOTOPURE™ Hxx Bluetooth® Handsfree
Headset, visit www.motorola.com/Bluetoothsupport.
choose an ear
connect with your first phone
“phone 1”
1 Turn off any Bluetooth devices previously paired
Power
Switch
Caution: Before using your headset, read the
important safety and legal information pamphlet and
follow its instructions.
Motorola,
Motorola,Inc.
Inc.
Consumer
Advocacy
Office
Consumer
AdvocacyRoad
Office
1307 East Algonquin
1307
East
Algonquin
Road
Schaumburg, IL 60196
Schaumburg, IL 60196
www.motorola.com
www.hellomoto.com
1-877-MOTOBLU
1-877-MOTOBLU
1-888-390-6456
(TTY/TDD United States for
1-888-390-6456
hearing
impaired)(TTY/TDD United States for
hearing impaired)
Guide Number: 68000201945-A (DRAFT 1)
Guide Number: 6809500A86-O
Once charged, get your headset connected to up to
two phones.
pairing and connecting
(linked) with your headset.
Volume
Buttons
First follow the easy steps in this guide to get your
handsfree headset charged and talking to your
phone. Then learn how to wear and use your
handsfree headset with this handy guide that’s easy
to take along with you.
Getting Started Guide
pair & connect
Slow purple pulse
Call muted
Quick red flash
Low battery
Make sure the indicator light on your headset is
steadily lit in blue when your phone is searching for
devices. If not, press and hold the Call and both
Volume buttons until you hear “ready to pair” and
see the indicator light steadily lit in blue.
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at www.motorola.com/
Bluetoothsupport.
Shasta_QSG.fm Page 2 Monday, January 26, 2009 12:05 AM
congratulations!
charge it
your headset
pair & connect
problems?
MOTOPURE™
Hxx (Shasta)
Getting Started Guide
Motorola,
Motorola,Inc.
Inc.
Consumer
Advocacy
Office
Consumer
AdvocacyRoad
Office
1307 East Algonquin
1307
East
Algonquin
Road
Schaumburg, IL 60196
Schaumburg, IL 60196
www.motorola.com
www.hellomoto.com
1-877-MOTOBLU
1-877-MOTOBLU
1-888-390-6456
(TTY/TDD United States for
1-888-390-6456
hearing
impaired)(TTY/TDD United States for
hearing impaired)
Guide Number: 68000201945-A (DRAFT 1)
Guide Number: 6809500A86-O
Bluetooth QD ID:Bxxxxxx
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© 2009 Motorola, Inc. All rights reserved.
put it on
basics
receive calls
make calls
while on a call
headset status


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Mode                       : UseNone
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.2
Modify Date                     : 2009:03:11 16:44:06+08:00
Create Date                     : 2007:07:13 11:43:39Z
Metadata Date                   : 2009:03:11 16:44:06+08:00
Format                          : application/pdf
Title                           : Shasta_QSG.fm
Creator                         : Rick
Document ID                     : uuid:7fef5089-6538-426e-a568-ce86aecb0c58
Instance ID                     : uuid:775286e2-3da0-4d77-a625-d617ccf4f439
Has XFA                         : No
Page Count                      : 4
Author                          : Rick

EXIF Metadata provided by EXIF.tools