Motorola Mobility T6ZC1 PCS Deskset User Manual ZC EX08
Motorola Mobility LLC PCS Deskset ZC EX08
Exhibit 8 Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 90010 |
| Application ID | 5sR5DuX3bHYwg/2dEkr3zQ== |
| Document Description | Exhibit 8 Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 88kB (1100035 bits) |
| Date Submitted | 2000-03-07 00:00:00 |
| Date Available | 2000-05-09 00:00:00 |
| Creation Date | 2000-03-07 17:28:55 |
| Producing Software | Acrobat PDFWriter 3.02 for Windows NT |
| Document Lastmod | 2000-03-07 17:30:34 |
| Document Title | ZC-EX08.PDF |
| Document Author: | bachaj |
APPLICANT: MOTOROLA, INC. FCC ID: IHDT6ZC1 INSTRUCTION MANUAL A preliminary draft copy of the Users Manual follows: EXHIBIT 8 FX5000.book Page 1 Monday, February 14, 2000 1:24 PM FX5000 Digital Fixed Wireless Telephone Cover to be Designed FX5000.book Page 2 Monday, February 14, 2000 1:24 PM Welcome Thank you for selecting Motorola — a world leader in communications technology. All Motorola wireless phones are designed and manufactured to meet Motorola’s exacting specifications and world class quality standards. The FX5000 Digital fixed wireless phone is no exception. This personal phone withstands our rigorous durability tests including temperature, humidity, and a drop test. • For any information about your wireless service, please call your service provider (Carrier). Carrier’s Name Carrier’s Phone Number • You will need to have the following information when you inquire about your phone or service. ESN Number MSN Number Model Number Wireless Phone Number Warranty Expiration Date Date of Purchase Product Quality is yours with Motorola! FX5000.book Page iii Monday, February 14, 2000 1:24 PM General Safety Information Wireless Operation Safety Information IMPORTANT! Read This Information Before Using Your Wireless Telephone. Exposure to Radio Frequency Signals Your fixed wireless telephone is a radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. European and International Agencies have set standards and recommendations for the protection of public exposure to RF electromagnetic energy. • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 • Verband Deutscher Electringenieure (VDE) DIN-0848 • Directives of the European Community, Directorate General V in Matters of Radio Frequency Electromagnetic Energy • National Radiological Protection Board of the United Kingdom, GS 11, 1998 • American National Standards Institute (ANSI) IEEE. C95.1-1992 • National Council on Radiation Protection and Measurements (NCRP). Report 86 • Department of Health and Welfare Canada. Safety Code 6 These standards are based on extensive scientific review. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the updated ANSI Standard. The design of your phone complies with these standards when used normally. During operation the user must be at least 20 centimeters away from the antenna. iii FX5000.book Pages iv - v Monday, February 14, 2000 1:24 PM General Safety Information General Safety Information Antenna Care Use only the supplied or approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. Potentially Explosive Atmospheres Do not operate your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Electronic Devices Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your fixed wireless phone. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include: fueling areas such as gasoline stations, below deck on boats, fuel or chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Pacemakers — The Health Industry Manufacturers Association recommends that a minimum separation of six inches (fifteen centimeters) be maintained between a fixed wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers: • Should always keep the phone more than six inches (fifteen centimeters) from their pacemaker when the phone is turned ON. • If you have any reason to suspect that interference is taking place, turn your phone OFF immediately. Using External Antennas Your FX5000 Digital telephone is equipped with an antenna which screws onto the transceiver. This antenna is intended for internal use, and will provide adequate operation under normal circumstances. If you elect to install an external antenna (not supplied by Motorola), you must take precautions to provide adequate lightning protection for the external antenna. Motorola assumes no liability if you elect to install an external antenna. Hearing Aids — Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices — If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Please Save These Instructions Blasting Areas Do not use your fixed wireless phone in an area where blasting operations are being performed. iv FX5000.book Page vi Monday, February 14, 2000 1:24 PM General Safety Information Notes… vi FX5000.book Page 1 Monday, February 14, 2000 1:24 PM Introduction About Your New FX5000 Digital Telephone The FX5000 Digital fixed wireless phone is a convenient and efficient solution for providing residential telephone service in geographical areas where normal landline telephone service is either inadequate or not available. The FX5000 Digital telephone consists of a base (containing a keypad and an internal wireless radio transceiver), a handset, and a power supply. After your Wireless Service Provider registers your phone for wireless service, simply plug the cord into any wall outlet and you are ready to place and receive calls. Since your FX5000 Digital telephone operates like a radio and uses the wireless telephone system, there is no need to have telephone wiring or jacks in your home. About This Manual In this manual, we’ll tell you how to assemble and install your FX5000 Digital telephone. We’ll also provide easy step-by-step instructions on using your phone to make and receive calls, storing numbers in memory, and using the other features offered by your FX5000 Digital telephone. Some photos representing AC plugs and antennas may differ from your actual unit. They are for illustrative purposes only. FX5000.book Pages 2 - 3 Monday, February 14, 2000 1:24 PM Introduction Introduction FX5000 Digital Telephone Major Components The major components of your FX5000 Digital telephone are shown in the photo on the next page. Antenna • Handset — Hold the handset to your ear like any normal telephone to carry on conversations. • Base — Provides the dialing keypad and other function buttons, as well as a hang-up cradle for the handset. • Antenna — Allows your FX5000 Digital telephone to send and receive radio signals to/ from the wireless telephone system. Hang-Up Cup Base • Power Supply — When plugged into an AC wall outlet, the power supply provides the DC electricity needed for your FX5000 Digital telephone to operate. Handset FX5000.book Page 4 Monday, February 14, 2000 1:24 PM Introduction Things You Should Know Before assembling, installing, and using your FX5000 Digital telephone, here are a few things you should be aware of: • Your FX5000 Digital telephone operates on the wireless telephone system. Before you can use your phone, make sure that your local Wireless Service Provider has registered your phone for wireless service. This includes programming your phone and providing you with a phone number. • Your FX5000 Digital telephone must be installed in an area where it can adequately communicate with the wireless telephone system (by radio communications). This means that the location in which you wish to use your phone must be within the coverage area of the wireless telephone system. Your Wireless Service Provider can advise you as to whether you are in the coverage area. • The Power Supply in your FX5000 Digital telephone is designed to withstand AC input power variations of up to 10%. If you suspect that your AC power varies more than this, you may choose to use an external surge protection device. • To clean your phone, use a soft rag. Do not use alcohol or any other solvent. • Please read General Safety Information before operating your phone. FX5000.book Page 5 Monday, February 14, 2000 1:24 PM Assembly Unpacking and Taking Inventory Open the packaging and remove the contents. Your FX5000 Digital telephone package should contain the following items. If it does not, return the entire package to the dealer and exchange it for a new package. Power Supply Antenna Handset Base Coil Cord FX5000.book Pages 6 - 7 Monday, February 14, 2000 1:24 PM Assembly Assembly Installing the Handset Attaching the Antenna Plug one end of the coil cord into the handset and the other end into the base, as shown below. Then place the handset into the cradle on the base. Locate the black rubber-coated antenna and attach it to the base as shown. Note that the antenna can be left straight or bent at a 90º angle, depending on whether you are using the phone on a horizontal surface (like a desk) or are going to wall mount the phone. For now, leave the antenna bent at a 90º angle as shown. NOTE You may elect to purchase and install an external antenna (not available from Motorola). In this case, be sure to observe all manufacturer’s recommendations regarding installation and lightning protection. In fact, you may wish to hire a professional to help you with the installation. Additionally, you may have to purchase an RF adapter to allow the antenna cable to connect to the transceiver. Be sure to read your Motorola warranty to determine the limits and liabilities imposed if you elect to use any hardware not approved by Motorola. Doing so may void your warranty. Connect coil cord to handset and base. Push each connector into receptacle until it "clicks" into place. Note that the connectors are keyed and can be plugged in only one way. Place handset into cradle in base. FX5000.book Page 8 Monday, February 14, 2000 1:24 PM Assembly Installing the Power Supply Connect the Power Supply cord as shown below. Do not connect the wall transformer to AC power at this time. FX5000.book Page 9 Monday, February 14, 2000 1:24 PM Installation Overview In this section, we will tell you how to mount your FX5000 Digital telephone (desktop or wall mounted) and how to plug your telephone into the AC outlet. Keep the following in mind when deciding where to position your telephone. • Do not place the phone or power supply near water. • Do not place the phone in direct sunlight to avoid possibly overheating the handset and transceiver. • Be sure to keep children and pets away from the phone and power supply. • Do not position the phone in close proximity to other electrical or electronic appliances (such as computers, microwave ovens, televisions, radios, etc.) to avoid possible electrical interference between the phone and the appliances. • Installing the phone inside a metal building is not recommended, since it may reduce the signal quality of your phone. • Do not dangle the phone by the DC power cord. Rest the phone on a table or other flat surface, or secure it to a wall as described in “Wall Mounting” on page 11. FX5000.book Pages 10 - 11 Monday, February 14, 2000 1:24 PM Installation Mounting Locations Overview Your FX5000 Digital telephone has been designed for use on a horizontal surface (like a desk) or a vertical surface (mounted to a wall). Both mounting methods are described below. Desktop Mounting You may place your phone on any horizontal surface, such as a desktop or counter top. Be sure to position your phone so that the DC power cord will reach a nearby electrical outlet. Note that the antenna should be positioned vertically as shown at right. Installation Wall Mounting You may mount your phone on any vertical surface, such as a wall. Be sure to position your phone so that the DC power cord will reach a nearby electrical outlet. Note that the antenna should be positioned vertically as shown. Install two 3 mm or 1/8" screws (not supplied) per template and adjust them until the phone has been firmly attached to the wall. 8.3 cm (3 1/4 ") NOTE Before drilling holes to wall mount your phone, it is a good idea to plug in your phone (described in “Plugging into AC Power” on page 12) and verify that you are receiving a strong signal (as indicated by the LED on the base turning green) and you are able to place and receive calls. Routethe theDC DC power to Route power cordcord to the the back theand base andit back of theofbase thread thread the it through the cable through cable retaining track retaining track as shown. as shown. The DCcord power cord The DC power should should hang down the bot hang down fromfrom the bottom tom of the base. of the base. Install two screws supplied) Attach phone as(not shown. per template, then attach phone as shown. 10 11 FX5000.book Pages 12 - 13 Monday, February 14, 2000 1:24 PM Installation Installation Notes… Plugging into AC Power Your FX5000 Digital telephone is equipped with an AC-to-DC transformer that you plug into an AC electrical outlet with voltage according to transformer. Check transformer label. Connect your telephone to AC power by plugging in the transformer to a nearby AC receptacle. 12 13 FX5000.book Pages 14 - 15 Monday, February 14, 2000 1:24 PM Controls and Indicators Controls and Indicators ➊ Numeric Keypad Used to enter call information. ➋ Flash Button This button is used to send a switch hook flash when a call is in progress. ➌ Function Buttons VOL and VOL Adjusts earpiece and ringer volume. RDL Places a call to the last number called. STO Stores numbers into any of nine available memory locations. ❹ LED Indicator When GREEN, indicates that telephone is receiving wireless service and is operating normally. You may place and receive calls when the LED is GREEN and the signal strength is sufficient. If the signal strength is insufficient, move the base closer to a window. When ORANGE, indicates that wireless service is available but you may experience noise during conversation and even have a call dropped. When RED, indicates that telephone is not receiving wireless service and cannot place or receive calls. LED indicator also blinks in other situations, for example, when storing a telephone number or programming the phone. 14 15 FX5000.book Pages 16 - 17 Monday, February 14, 2000 1:24 PM Operating Your Telephone Overview This section provides step-by-step instructions for operating your FX5000 Digital telephone, including how to turn your phone on and off, place calls, receive calls, and end calls. Also described are memory dialing, volume adjustments, and last number redial. Whenever using your phone, keep the following in mind: • Like a normal landline telephone, you will hear a dial tone when lifting your handset. • To place a call, pick up the handset, enter the phone number and the call will be placed a few seconds after the last key is pressed. • When finished with a call, you must either hang up the handset in the base, or use your finger to depress the hang-up button in the handset. Operating Your Telephone Basic Operation Turning Your Phone On and Off Your FX5000 Digital telephone is on whenever the transformer is plugged into a powered AC electrical outlet and the DC power cord is plugged into the base. You can tell if your telephone is on (and operational) if the LED on the base is GREEN. (It may take a few seconds after first applying power for the LED to turn GREEN.) How to Place a Call • Before using your phone, the AC transformer must be plugged in and the LED on the base must be GREEN. The base must also be placed in an area where the signal will be strong. 1. With power on, lift the handset and enter the number you wish to call by pressing the keypad buttons. As you press each button, make sure you hear a tone in the handset earpiece to confirm your entry. • If you lose AC electrical power, your FX5000 Digital phone will not operate. However, any phone numbers and other information you have stored in memory will be preserved. 2. The call will be placed a few seconds after the last key is pressed. 3. Begin the conversation when the called party answers. Note If you are dialing a number and an incoming call is received, you will hear the incoming call ringer in the handset earpiece. To answer the call, press Flash . 16 17 FX5000.book Pages 18 - 19 Monday, February 14, 2000 1:24 PM Operating Your Telephone Operating Your Telephone Using Memory Dialing How to Receive a Call When you hear the ring tone indicating an incoming call, lift the handset to your ear and begin the conversation. How to End a Call When you are finished with your conversation, hang up the handset in the base. Note If you wish to place another call right away, you may simply press and release the hangup button in the handset. You will hear the dial tone and you may dial a new number for the next call. Your phone provides nine memory locations (designated by location numbers 1, 2, through 9) in which to store frequently called phone numbers. Each memory location accepts up to 20 digits. 1. Press This feature allows you to press a single button to automatically place a call to the last phone number you called (either placed by entering the number from the keypad or recalled from memory). RDL STO . LED indicator will blink red and green. 2. Enter the phone number you wish to store (up to 20 digits). 3. Press Redialing Last Number Called 1. With power on, lift the handset, then press and release Storing Numbers in Memory STO 4. Enter a location number (e.g., , etc.). Note If you store a phone number in a memory location where a number is already stored, the new number will permanently overwrite the old number. You can abort the store process by pressing the Flash key 2. You will hear the ring tone in the handset earpiece. 3. Begin the conversation when the called party answers. 18 19 FX5000.book Pages 20 - 21 Monday, February 14, 2000 1:24 PM Operating Your Telephone Operating Your Telephone Placing Calls from Memory Making Volume Adjustments 1. With power on, lift the handset. Adjusting the Earpiece Volume 2. Press and hold the associated digit key ( 1 through 9 ). You will hear the tone associated with the key and the call will be placed a few seconds after the sound changes to a distinctive tone. The loudness of the audio you hear from the handset earpiece while in a conversation can be adjusted to seven volume levels. 3. You will hear the ring tone in the handset earpiece. 4. Begin the conversation when the called party answers. To increase the volume level — While in a call, press and release the increase the volume level one step. To decrease the volume level — While in a call, press and release the decrease the volume level one step. VOL button to VOL button to Note You may also adjust the transceiver audio tones when not in a call. Simply lift the handset and press VOL or VOL (as described above). 20 21 FX5000.book Pages 22 - 23 Monday, February 14, 2000 1:24 PM Operating Your Telephone Operating Your Telephone Adjusting the Ringer Volume Advanced Call Features The loudness of the ringer tone you hear from the base to alert you of an incoming call can be adjusted to seven volume levels. Your phone supports the advanced call features: call waiting, call forwarding and 3-way call. These features are dependent on your Service Provider. Please contact your Service Provider for details on how to use these features. To increase the volume level — With the handset in the base, press and release the VOL button to increase the volume level one step. You will hear a tone to indicate the volume level. To decrease the volume level — With the handset in the base, press and release the VOL button to decrease the volume level one step. You will hear a tone to indicate the volume level. 22 23 FX5000.book Page 24 Monday, February 14, 2000 1:24 PM Troubleshooting Overview If you have problems placing or receiving calls, try to locate your difficulty in the following troubleshooting table and follow the instructions to remedy the problem. If you still are having problems, contact your Wireless Service Provider. Troubleshooting Table Symptom You cannot make or receive calls You hear static or intermittent voice during conversations 24 Remedy •Make sure that your phone’s power supply is plugged into an AC outlet. •Make sure that the AC power in your house or office is on. •Have you obtained wireless service? •Try moving the location of your phone. •Be sure the antenna is in a vertical position. FX5000.book Page 25 Monday, February 14, 2000 1:24 PM Technical Specifications Technical Specifications The following table lists the technical specifications for your FX5000 Digital telephone. General Weight 19.3 cm x 19.1 cm x 6.6 cm (excluding antenna) 1.1 Kg Operating Temperature RF Connection Input/Output Impedance 0º C to +40º C TNC 50 ohms nominal Dimensions Power Supply Input Voltage Input Frequency Output Voltage Output Current 90 to 240 VAC 50 to 60 Hz 7.5 VDC 900 mA Protection Output are short-circuit protected and isolated from input until 3000 V 25 FX5000.book Page 26 Monday, February 14, 2000 1:24 PM American Wireless Subscriber Group 600 North U.S. Highway 45 Libertyville, Illinois 60048-5343 U.S.A. Visit us on the web: www.mot.com , and all other trademarks indicated as such herein are trademarks of Motorola, Inc. Reg. U.S. Pat. & TM off. 2000 Motorola, Inc. All rights reserved Printed in the U.S.A. 68P09425A76-O x/xx/99-xxx
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Creator : Create Date : 2000:03:07 17:28:55 Title : ZC-EX08.PDF Author : bachaj Producer : Acrobat PDFWriter 3.02 for Windows NT Subject : Modify Date : 2000:03:07 17:30:34 Page Count : 23EXIF Metadata provided by EXIF.tools