Motorola Solutions 89FT3811 ELB VHF 2-Way Radio (RLD1036A) User Manual cover eps

Motorola Solutions, Inc. ELB VHF 2-Way Radio (RLD1036A) cover eps

Contents

Ex 8 User Manual

ELB SeriesTwo-Way Radio's User Guide
6864110w15oTOC.fm  Page 2  Wednesday, August 17, 2005  11:20 AM
1ContentsFCC Licensing Information .......... 2Product Safety and RF  Exposure Compliance............................... 4Introduction ................................... 5Radio Controls .............................. 6Reading the Display .................... 7Getting Started .............................. 8Installing the Nickel-Metal Hydride Battery...................................... 9Charging using the 53xxx Drop-In Charging Tray......................... 10Battery Meter............................. 11Attaching the Belt Clip ............... 11Turning the Radio On and Off ... 12Adjusting the Volume................. 12Talking and Receiving ................ 13Basic Radio Operation............... 13Signal Strength Indicator ........... 13Programming Mode .................... 14Entering Programming Mode..... 14Features........................................17Call Tone....................................17Hands-Free Use/VOX (ELB1210 Only) .......................................18Locking the Keypad ...................19End-of-Transmission Tone.........19Time-Out Timer..........................19Frequency and Code Charts.......20Troubleshooting .........................26Limited Warranty .........................29TOC.fm  Page 1  Tuesday, August 30, 2005  12:03 PM
FCC Licensing Information2FCC Licensing InformationELB Series professional two-way radios operate on radio frequencies that are regulated by the Federal Communications Commission (FCC). In order to transmit on these frequencies, you are required to have a license issued by the FCC.Application is made available on FCC Forms 601, schedules D and H, and remittance form 159. If ordering the forms by mail, phone, or from the FCC website, please request document number 000601, which includes all forms and instructions. If using the FCC Fax-on-Demand system, use the 7-digit order numbers listed below.To obtain the required forms, please use the following contact information: Before filling out your application, you must decide which frequency(ies) you can operate on. See Frequency and Code Charts on page 20. For questions on determining your radio frequency, please call Motorola Product Services at 1-800-448-6686.Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments Faxedcontact the Fax-On-Demand system at: Mailed call the FCC forms hotline at:By Phone or Web or for questions regarding FCC licensecontact the FCC at:1-202-418-0177 1-800-418-FORM1-800-418-36761-888-CALL-FCC 1-888-225-5322or: http://www.fcc.govRequest forms 3060001, 3060003, and 3060006 Request document 000601 Request document 000601fcc.fm  Page 2  Tuesday, August 30, 2005  12:03 PM
FCC Licensing Information3should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules.Note: Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited.fcc.fm  Page 3  Tuesday, August 30, 2005  12:03 PM
Product Safety and RF Exposure Compli-4Product Safety and RF  Exposure ComplianceATTENTION!  This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68P81095C98) to ensure compliance with RF energy exposure limits.  For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/cgiss/index.shtml.Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio.!C a u t i o nsafety.fm  Page 4  Tuesday, August 30, 2005  12:04 PM
Introduction5Introduction Thank you for purchasing a Motorola ELB Series two-way radio product. The Motorola ELB Series two-way radio models are products of Motorola’s 75-plus years of experience as a world leader in designing and manufacturing communications equipment. The ELB Series two-way radios are a perfect cost-effective communications solution for all of today’s fast-paced businesses and industries.Product registration is an important step. Registering helps facilitate warranty service and permits us to contact you should your Motorola product require an update or other service.To register your product on-line, visit www.motorola.com/warranty/radios. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.Note: Please be sure to save this programming instructions for further reference.intro.fm  Page 5  Tuesday, August 30, 2005  12:04 PM
Radio Controls6Radio ControlsMENUMONELB1210MICUse P to:Turn radio on/offAdjust radio volumeUse Push to Talk to:TalkExit a menuUse to:Lock the keypadScroll through menusMENUUse to:Monitor the frequency MONMicrophoneAccessory JackSpeakerUse and to:Change channelsChange menu settingsLEDDisplayUse to:Transmit a Call Tonegetstart.fm  Page 6  Friday, September 2, 2005  2:34 PM
Radio Controls7Reading the DisplayNote: The radio display shown here is for icon location only. Each radio display may appear different (channel and code) based on the pre-programmed radio defaults.Battery MeterProgramming ModeChannelSignal Strength and Channel Busy IndicatorKeypad Lock Frequency and Interference Eliminator CodeFrequency IndicatorInterference EliminatorCode IndicatorVOXgetstart.fm  Page 7  Friday, September 2, 2005  2:34 PM
Getting Started8Getting StartedThis user’s guide covers multiple ELB Series models, and may detail some features your radio does not have. Your model number is shown on the front of the radio below the radio display, and informs you of the following information.Model Frequency Band Watts Number of ChannelsELB1110 UHF 1 1ELB1110 VHF 1 1ELB1210 UHF 1 2ELB1210 VHF 1 2getstart.fm  Page 8  Friday, September 2, 2005  2:34 PM
Getting Started9Installing the Nickel-Metal Hydride BatteryThe ELB Series radio operates using a Nickel-Metal Hydride (NiMH) rechargeable battery pack, which proves up to 9 hours1 of usage. A battery, transformer, and drop-in charger tray are supplied with your radio.1. Make sure your radio is turned off, by turning the volume knob counterclockwise.2. Remove the belt clip, if necessary (see page 11).3. With the radio back facing you, push the latch on the bottom of the radio away from you and slide the battery cover downward, toward you.4. Insert the NiMH battery. Read battery pack installation instructions for appropriate fit.5. Slide and snap the battery cover into place.Note: Remove batteries before storing your radio for extended periods. Batteries corrode over time and may cause permanent damage to your radio. Exercise caution when handling batteries that are leaking. Dispose of exhausted batteries at a designated battery disposal unit and not in the household waste.1. Based on a standard duty cycle of 5% Transmit, 5% Receive, and 90% Standby.DO NOT disassemble the NiMH battery pack.12getstart.fm  Page 9  Friday, September 2, 2005  2:34 PM
Getting Started10Charging using the 53xxx Drop-In Charging TrayThe Drop-in Charging Tray can be placed on any flat surface and provides drop-in charging convenience. The battery must be charged while inside of the radio.1. Connect the transformer and the drop-in tray by inserting the plug of the transformer into the rear jack of the drop-in charging tray.2. Plug the transformer into an AC outlet. 3. Turn the radio off. If the radio is on while charging, it will take longer to fully charge.4. Insert the radio (with battery installed) into the charging tray pocket with the radio front facing the front of the charger.MENUMONELB1210MICgetstart.fm  Page 10  Friday, September 2, 2005  2:34 PM
Getting Started11Battery MeterThe battery meter in the upper left corner of the display shows how much battery power is remaining.Attaching the Belt ClipYour radio includes a belt clip for your convenience.1. To attach the belt clip, slide the belt clip into the grooves on the top of the radio and slide it down until it clicks into place.2. To remove, pull back the release latch on the top of the belt clip and slide the belt clip up and away from the radio.Note: In case of loss, please contact your point-of-sales or call 1-800-353-2729 and request a replacement part number (53xxx for the ELB1110 or 53xxx for the ELB1210).Battery Type 3 Bars 2 Bars 1 Bar Flashingdb c mNiMH 100%–85% 85%–25% 25%–10% Final 10%getstart.fm  Page 11  Friday, September 2, 2005  2:34 PM
Getting Started12Turning the Radio On and OffSee “Radio Controls” on page 6 for a basic radio diagram.Turn P clockwise to turn the radio ON, and counterclockwise to turn the radio OFF. When you turn the radio on, the radio chirps and the display briefly shows all features and display segments. The LED on the front left of the radio flashes every three seconds when the radio is ON.The radio then displays the current channel (larger number) and the frequency assigned to that channel (on the right indicated by l).The Interference Eliminator Code displays briefly (indicated by y). The code will then disappear and the current channel remains displayed. Adjusting the VolumeTurn P clockwise to increase the volume, and counterclockwise to decrease the volume.Note: Do not hold the radio too close to your ear when adjusting the volume.getstart.fm  Page 12  Friday, September 2, 2005  2:34 PM
Talking and Receiving13Talking and ReceivingBasic Radio OperationIt is good radio practice to monitor the channel you intend to use before transmitting.  This practice ensures that you do not interrupt other users already on that same channel.To check for Channel activity, press and listen. If you hear static, then the channel is free for use. If someone is already speaking on that channel do not transmit. Press again to stop monitoring.1. To talk, press and hold the Push to Talk button and speak into the microphone. To maximize clarity, hold the radio 2 to 3 inches away from your mouth.2. To listen, release the Push to Talk button. Note: The LED on the front left of the radio lights a steady red when transmitting.Signal Strength IndicatorWhen there is activity on a frequency, the radio displays w and the LED flashes once per second.When there is activity on the same frequency and code as your radio (your radio is receiving), the radio displays w and a signal strength from 1 (weakest) to 6 (strongest). This can help determine when a radio is moving out of range.Note: Obstacles that block the signal path may affect the strength of the incoming signal.MONMONoperation.fm  Page 13  Tuesday, August 30, 2005  1:16 PM
Programming Mode14Programming ModeIn order to speak with someone on your two-way radios, the following features must be set to the exact settings on all radios:• Channel: The current channel that the radio is using to transmit.• Frequency: The frequency your radio is using to transmit or receive (see page XX).• Interference Eliminator Code: These codes help to minimize interference by providing you with a choice of code combinations (see page XX).Entering Programming ModeOnce in Programming Mode, the radio beeps and displays k.Note: If you press and release the Push to Talk button when programming, you will exit Programming Mode.To Do This Press These Buttons While Turning the Radio ON Channel Push to Talk button andFrequency Push to Talk button andInterference Eliminator Code (this will disable “End of Transmission Tone”MONMENUoperation.fm  Page 14  Tuesday, August 30, 2005  1:16 PM
Programming Mode15Make sure kis displayed. See Entering Programming Mode for instructions on how to access.Channel1. The Channel number flashes and the land y indicators display alternately.2. Press or until the desired Channel is selected.3. Press the Push to Talk button to exit.Frequency1. Press once, the lindicator displays and the Frequency flashes.2. Press or to choose the desired Frequency.3. Press the Push to Talk button to exit.Interference Eliminator Code1. Select the channel on which you wish to change the Code.2. To set the Code, press until the Code number display begins to flash.3. Press or to select the desired Code.4. Press the Push to Talk button to exit.Note: To hear everyone on your frequency, select Interference Eliminator Code 0.MENUMENUoperation.fm  Page 15  Tuesday, August 30, 2005  1:16 PM
Programming Mode16To Specify a Different Code for Each Channel (ELB1210 Only)1. Press and then press or to select the Channel.2. Press again and then press or to select the desired Code.3. Press the Push to Talk button to set and exit.MONMONoperation.fm  Page 16  Tuesday, August 30, 2005  1:16 PM
Features17FeaturesCall ToneYour radio can transmit Call Tones to other radios in your group so you can alert them that you are about to talk. Once the Call Tone is set, press to transmit the Call Tone to others. The number of Call Tones supported by your radio is based on model:ELB1110 1 Call Tone plus OffELB1210 2 Call Tones plus OffTo Set the Call Tones1. Press until Edisplays.2. Press or hear and select a Call Tone.3. Setting the Call Tone to 0 sets the Call Tones to OFF.4. Press to exitNote: The default is set to 0, Call Tones are OFF.MENUMENUoperation.fm  Page 17  Tuesday, August 30, 2005  1:16 PM
Features18Hands-Free Use/VOX (ELB1210 Only)This feature allows you to activate the radio transmitter with your voice by using a Motorola authorized audio accessory, instead of having to press the Push to Talk  button.It is recommended that the radio volume level be kept to a minimum until the audio accessory is put in place and your radio is turned on to adjust the volume to a user's volume preference. 1. Turn the radio OFF.2. Open the accessory cover.3. Insert the audio accessory plug firmly into the accessory jack.4. Turn the radio ON. The g icon will display. If flashing, press the Push to Talk button to re-enable VOX.5. To transmit, speak into the accessory microphone. To receive, stop talking.6. To disable VOX operation, press the Push to Talk button or simply remove the audio accessory.Note: There is a short delay between the start of a voice transmission and when the radio transmits.operation.fm  Page 18  Tuesday, August 30, 2005  1:16 PM
Features19Locking the KeypadYou can lock the keypad buttons to avoid accidentally changing your radio settings.1. To lock the keypad, press and hold for 3 seconds.Note: The f icon will display.2. To unlock, press and hold for 3 seconds.End-of-Transmission ToneIf enabled, your two-way radio transmits a tone when you finish transmitting. It is like saying Roger or Over.1. To enable, press and hold as you turn the radio ON.2. To disable, simply turn your radio OFF and press and hold as you turn the radio ON.Time-Out TimerThe radio will emit a warning tone and will stop transmitting if the Push to Talk button is pressed for more than 60 seconds continuously.MENUMENUoperation.fm  Page 19  Tuesday, August 30, 2005  1:16 PM
Frequency and Code Charts20Frequency and Code ChartsThe charts on the following pages provide Frequency and Code information. These charts are useful when using Motorola ELB Series two-way radios with other business radios. Frequency position is identical to Spirit M, GT, S, and XTN Series Frequencies (where applicable).VHF FrequenciesFrequency  (MHz) Bandwidth Frequency  (MHz) Bandwidth1 151.6250 25.0 16 151.8650 25.02 151.9550 25.0 17 151.8950 25.03 154.5700 25.0 18 151.9250 25.04 154.6000 25.0 19 152.7000 25.05 151.7000 12.5/25.0 20 154.4900 25.06 151.7600 12.5/25.0 21 154.5150 25.07 151.8200 12.5/25.0 22 154.5275 25.08 151.8800 12.5/25.0 23 154.5400 25.09 151.9400 25.0 24 154.6000 25.010 151.5125 25.0 25 154.6550 25.011 151.6550 25.0 26 158.4000 25.012 151.6850 125.0 27 158.4075 25.013 151.7150 25.014 151.7450 25.015 151.7750 25.0operation.fm  Page 20  Tuesday, August 30, 2005  1:16 PM
Frequency and Code Charts21UHF Frequencies Frequency (MHz) Bandwidth Frequency (MHz) Bandwidth1 464.5000 12.5/25.0 20 461.3125 12.52 464.5500 12.5/25.0 21 461.3375 12.53 467.7625 12.5 22 461.3625 12.54 467.8125 12.5 23 462.7625 12.55 467.8500 12.5/25.0 24 462.7875 12.56 467.8750 12.5/25.0 25 462.8125 12.57 467.9000 12.5/25.0 26 462.8375 12.58 467.9250 12.5/25.0 27 462.8625 12.59 461.0375 12.5 28 462.8875 12.510 461.0625 12.5 29 462.9125 12.511 461.0875 12.5 30 464.4875 12.512 461.1125 12.5 31 464.5125 12.513 461.1375 12.5 32 464.5375 12.514 461.1625 12.5 33 464.5625 12.515 461.1875 12.5 34 466.0375 12.516 461.2125 12.5 35 466.0625 12.517 461.2375 12.5 36 466.0875 12.518 461.2625 12.5 37 466.1125 12.519 461.2875 12.5 38 466.1375 12.5operation.fm  Page 21  Tuesday, August 30, 2005  1:16 PM
Frequency and Code Charts2239 466.1625 12.5 48 467.7875 12.540 466.1875 12.5 49 467.8375 12.541 466.2125 12.5 50 467.8625 12.542 466.2375 12.5 51 467.8875 12.543 466.2625 12.5 52 467.9125 12.544 466.2875 12.5 53 469.4875 12.545 466.3125 12.5 54 469.5125 12.546 466.3375 12.5 55 469.5375 12.547 466.3625 12.5 56 469.5625 12.5UHF Frequencies  (Continued)Frequency (MHz) Bandwidth Frequency (MHz) Bandwidthoperation.fm  Page 22  Tuesday, August 30, 2005  1:16 PM
Frequency and Code Charts23Interference Eliminator CodesCode Hz Code Hz Code Hz1 67.0 14 107.2 27 167.92 71.9 15 110.9 28 173.83 74.4 16 114.8 29 179.94 77.0 17 118.8 30 186.25 79.7 18 123.0 31 192.86 82.5 19 127.3 32 203.57 85.4 20 131.8 33 210.78 88.5 21 136.5 34 218.19 91.5 22 141.3 35 225.710 94.8 23 146.2 36 233.611 97.4 24 151.4 37 241.812 100.0 25 156.7 38 250.313 103.5 26 162.2operation.fm  Page 23  Tuesday, August 30, 2005  1:16 PM
Frequency and Code Charts24Digital Interference Eliminator Codes Code Hz Code Hz Code Hz39 023 58 132 77 26540 025 59 134 78 27141 026 60 143 79 30642 031 61 152 80 31143 032 62 155 81 31544 043 63 156 82 33145 047 64 162 83 34346 051 65 165 84 34647 054 66 172 85 35148 065 67 174 86 36449 071 68 205 87 36550 072 69 223 88 37151 073 70 226 89 41152 074 71 243 90 41253 114 72 244 91 41354 115 73 245 92 42355 116 74 251 93 43156 125 75 261 94 43257 131 76 263 95 445operation.fm  Page 24  Tuesday, August 30, 2005  1:16 PM
Frequency and Code Charts2596 464 105 606 114 70397 465 106 612 115 71298 466 107 624 116 72399 503 108 627 117 731100 506 109 631 118 732101 516 110 632 119 734102 532 111 654 120 743103 546 112 662 121 754104 565 113 664Digital Interference Eliminator Codes  (Continued)Code Hz Code Hz Code Hzoperation.fm  Page 25  Tuesday, August 30, 2005  1:16 PM
Troubleshooting26Troubleshooting  Symptom Try This:No PowerReposition, recharge or replace NiMH battery pack. Message not transmittingMake sure the Push to Talk button is completely pressed while transmitting.Reposition, recharge, replace the NiMH battery pack.Message not receivedConfirm that all radios have the same channel, frequency, and interference eliminator code settings.Make sure that the Push to Talk button is not inadvertently being pressed. Reposition, recharge, or replace the NiMH battery pack.Obstructions and operating indoors or in vehicles may interfere - change location. Hearing conversation or noise on a channelCheck that the Interference Eliminator Code setting is not set to 0. A shared channel may be in use, try another.operation.fm  Page 26  Tuesday, August 30, 2005  1:16 PM
Troubleshooting27Limited talk rangeSteel and/or concrete structures, heavy foliage, buildings, or vehicles decrease range. Check for a clear line of sight to improve transmission. Wearing the radio close to the body such as in a pocket or on a belt decreases range. Change location of the radio. Heavy static or interferenceRadios are too close to one another. They must be at least 5 feet apart.Obstacles are interfering with transmission. Keypad lockedMake sure menu us unlocked. Unlock by holding for 3 seconds. Low batteries Recharge or replace NiMH battery pack. Extreme operating temperatures affect battery life.Charger light does not come onCheck that radio/battery is properly inserted and check battery/charger contacts to be sure they are clean.Verify that the charging pin is inserted correctly. Symptom Try This:MENUoperation.fm  Page 27  Tuesday, August 30, 2005  1:16 PM
Troubleshooting28operation.fm  Page 28  Tuesday, August 30, 2005  1:16 PM
Limited Warranty29Limited WarrantyMOTOROLA COMMUNICATIONS PRODUCTS Purchased in the United States and CanadaWarrantyI. What This Warranty Covers•Products. Defects in materials and workmanship in wireless cellular telephones, pagers, and/or two-way radios, and certain accessories that are sold with them, such as the battery, battery charger, and holster manufactured and/or sold by MOTOROLA. •Batteries. Defects in materials and workmanship in batteries that are manufactured by MOTOROLA and/or sold with Products are covered by this warranty only if the fully-charged capacity falls below 80% of rated capacity or they leak. •Software. Physical defects in the media that tangibly embodies each copy of any software supplied with the Products. II. What the Period of Coverage IsFrom the date the Products are purchased by the first end-user:•Products. The warranty is for one year. •Software. The warranty is for 90 days.warranty.fm  Page 29  Tuesday, August 30, 2005  12:56 PM
Limited Warranty30•Repairs/Replacements. The warranty is for the balance of the original warranty or for 90 days from the date you receive it, whichever is longer.III. Who is CoveredThis warranty extends to the first end-user purchaser only.IV. What We Will Do to Correct Warranty ProblemsAt no charge to you, we have the option to repair or replace the Products or software that do not conform to the warranty, or to refund the Products’ purchase price. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products or parts. No software updates are provided. V. How to Obtain Warranty Service or Other InformationYou will receive instructions on how to ship the Products to MOTOROLA. You must ship the Products to us with freight, duties and insurance prepaid. Along with the Products you must include: (a) a copy of your receipt, bill of sale or other comparable USA Two-Way Radios 1-800-448-6686 Canada All Products 1-800-461-4575 TTY TTY 1-888-390-6456 For Accessories and Software, please call the telephone number designated above.warranty.fm  Page 30  Tuesday, August 30, 2005  12:56 PM
Limited Warranty31proof of purchase; (b) a written description of the problem; (c) the name of your service provider (if this Product requires subscription service); (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number. If requested, you must also return all detachable parts such as antennas, batteries and chargers. RETAIN YOUR ORIGINAL PROOF OF PURCHASE.We will ship repaired or replacement Products at our expense for the freight and insurance, but at your expense for any duties. If additional information is needed, please contact us at the telephone number listed on page 30. VI. What This Warranty Does Not Cover• Products that are operated in combination with ancillary or peripheral equipment or software not furnished by MOTOROLA for use with the Products (“ancillary equipment”), or any damage to the Products or ancillary equipment as a result of such use. Among other things, “ancillary equipment” includes batteries, chargers, adaptors, and power supplies not manufactured or supplied by MOTOROLA. Any of these voids the warranty.• Someone other than MOTOROLA (or its authorized service centers) tests, adjusts, installs, maintains, alters, modifies, or services the Products in any way. Any of these voids the warranty. • Rechargeable batteries that: (a) are charged by other than the MOTOROLA approved battery charger specified for charging such batteries; (b) have any broken seals or show evidence of tampering; (c) are used in equipment other warranty.fm  Page 31  Tuesday, August 30, 2005  12:56 PM
Limited Warranty32than the Product for which they are specified; or (d) are charged and stored at temperatures greater than 60 degrees centigrade. Any of these voids the warranty.• Products that have: (a) serial numbers or date tags that have been removed, altered, or obliterated; (b) board serial numbers that do not match each other, or board serial numbers that do not match the housing; or (c) nonconforming or non-MOTOROLA housings or parts. Any of these voids the warranty.• Defects or damage that result from: (a) use of the Products in a manner that is not normal or customary; (b) improper operation or misuse; (c) accident or neglect such as dropping the Products onto hard surfaces; (d) contact with water, rain, extreme humidity, or heavy perspiration; (e) contact with sand, dirt or the like; or (f) contact with extreme heat, or spills of food or liquid. • Physical damage to the surface of the Products, including scratches, cracks, or other damage to a display screen, lens, or other externally exposed parts.• Failure of Products that is due primarily to any communication service or signal you may subscribe to or use with the Products.• Coil cords that are stretched or that have any broken modular tabs. • Products that are leased.Flat-rate repair rates may apply to Products not covered by this warranty. To obtain information about Products needing repairs that are not covered by this warranty, warranty.fm  Page 32  Tuesday, August 30, 2005  12:56 PM
Limited Warranty33please call the telephone number previously listed. We will provide information on repair availability, rates, methods of payment, where to send the Products, etc.VII. Some Other LimitationsThis is MOTOROLA’s complete warranty for the Products, and states your exclusive remedies. This warranty is given in lieu of all other express warranties. Implied warranties, including without limitation, the implied warranties of merchantability and fitness for a particular purpose, are given only if specifically required by applicable law. Otherwise, they are specifically excluded. No warranty is made as to coverage, availability, or grade of service provided by the Products, whether through a service provider or otherwise. No warranty is made that the software will meet your requirements or will work in combination with any hardware or applications software products provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.In no event shall MOTOROLA be liable, whether in contract or tort (including negligence) for damages in excess of the purchase price of the Product, or for any indirect, incidental, special or consequential damages of any kind, or loss of revenue or profits, loss of business, loss of information or data, or other financial loss arising out of or in connection with the ability or inability to use the Products, to the full extent these damages may be disclaimed by law.warranty.fm  Page 33  Tuesday, August 30, 2005  12:56 PM
Limited Warranty34VIII. Patent and Software ProvisionsAt MOTOROLA’s expense, we will defend you, and pay costs and damages that may be finally awarded against you, to the extent that a lawsuit is based on a claim that the Products directly infringe a United States patent. Our obligation is conditioned on: A. you notifying us promptly in writing when you receive notice of the claim; B. you giving us sole control of the defense of the suit and all negotiations for its settlement or compromise; andC.  should the Products become, or in Motorola's opinion be likely to become, the subject of a claim of infringement of a United States patent, you permit us, at our option and expense, either to: procure for you the right to continue using the Products; replace or modify them so that they become non-infringing; or grant you a credit for such Products, as depreciated, and accept their return. The depreciation will be an equal amount per year over the lifetime of the Products, as established by MOTOROLA.MOTOROLA will have no liability to you with respect to any claim of patent infringement that is based upon the combination of the Products or parts furnished under this limited warranty with ancillary equipment, as defined in VI. This is MOTOROLA’s entire liability with respect to infringement of patents by the Products.warranty.fm  Page 34  Tuesday, August 30, 2005  12:56 PM
Limited Warranty35Laws in the United States and other countries preserve for MOTOROLA and other third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to reproduce in copies and distribute copies of such software. The software may be copied into, used in and redistributed with only those Products that are associated with such software. No other use, including without limitation, disassembly or reverse engineering of such software or exercise of exclusive rights in such software is permitted.Some states and other jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction. warranty.fm  Page 35  Tuesday, August 30, 2005  12:56 PM
Limited Warranty36warranty.fm  Page 36  Tuesday, August 30, 2005  12:56 PM
6864110w15oTOC.fm  Page 2  Wednesday, August 17, 2005  11:20 AM
6880309S90-O*6880309S90*MOTOROLA and the Stylized M Logo are registered in theU.S. Patent and Trademark Office.  All other product orservice names are the property of their respective owners.© Motorola, Inc. 2005.

Navigation menu