Motorola Solutions 89FT3811 ELB VHF 2-Way Radio (RLD1036A) User Manual cover eps

Download:
Mirror Download [FCC.gov]
Document ID	582887
Application ID	oKM+MkLgRLqOrkk/bNAkng==
Document Description	Ex 8 User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	111.52kB (1393941 bits)
Date Submitted	2005-09-16 00:00:00
Date Available	2005-11-09 00:00:00
Creation Date	2005-08-16 13:21:36
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-09-12 10:59:07
Document Title	cover.eps
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ckc015

ELB Series
Two-Way Radio's User Guide
6864110w15oTOC.fm Page 2 Wednesday, August 17, 2005 11:20 AM
TOC.fm Page 1 Tuesday, August 30, 2005 12:03 PM
Contents
FCC Licensing Information .......... 2
Product Safety and RF Exposure
Compliance............................... 4
Introduction ................................... 5
Radio Controls .............................. 6
Reading the Display .................... 7
Getting Started .............................. 8
Installing the Nickel-Metal Hydride
Battery ...................................... 9
Charging using the 53xxx Drop-In
Charging Tray......................... 10
Battery Meter ............................. 11
Attaching the Belt Clip ............... 11
Turning the Radio On and Off ... 12
Adjusting the Volume................. 12
Features........................................ 17
Call Tone.................................... 17
Hands-Free Use/VOX (ELB1210
Only) ....................................... 18
Locking the Keypad ................... 19
End-of-Transmission Tone......... 19
Time-Out Timer .......................... 19
Frequency and Code Charts....... 20
Troubleshooting ......................... 26
Limited Warranty ......................... 29
Talking and Receiving ................ 13
Basic Radio Operation............... 13
Signal Strength Indicator ........... 13
Programming Mode .................... 14
Entering Programming Mode..... 14
fcc.fm Page 2 Tuesday, August 30, 2005 12:03 PM
FCC Licensing Information
FCC Licensing Information
ELB Series professional two-way radios operate on radio frequencies that are regulated by the Federal
Communications Commission (FCC). In order to transmit on these frequencies, you are required to have a
license issued by the FCC.
Application is made available on FCC Forms 601, schedules D and H, and remittance form 159. If ordering the
forms by mail, phone, or from the FCC website, please request document number 000601, which includes all
forms and instructions. If using the FCC Fax-on-Demand system, use the 7-digit order numbers listed below.
To obtain the required forms, please use the following contact information:
By Phone or Web
Faxed
Mailed
or for questions
contact the Fax-On-Demand call the FCC forms hotline
regarding FCC license
system at:
at:
contact the FCC at:
1-888-CALL-FCC
1-800-418-FORM
1-202-418-0177
1-888-225-5322
1-800-418-3676
or: http://www.fcc.gov
Request forms 3060001,
Request document 000601
Request document 000601
3060003, and 3060006
Before filling out your application, you must decide which frequency(ies) you can operate on. See Frequency
and Code Charts on page 20. For questions on determining your radio frequency, please call Motorola Product
Services at 1-800-448-6686.
Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the
FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments
should be made only by or under the supervision of a person certified as technically qualified to perform
transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization
representative of the user of those services. Replacement of any transmitter component (crystal,
semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules.
Note: Use of this radio outside the country where it was intended to be distributed is subject to government
regulations and may be prohibited.
FCC Licensing Information
fcc.fm Page 3 Tuesday, August 30, 2005 12:03 PM
safety.fm Page 4 Tuesday, August 30, 2005 12:04 PM
Product Safety and RF Exposure Compli-
Product Safety and RF Exposure Compliance
Caution
Before using this product, read the operating instructions for safe
usage contained in the Product Safety and RF Exposure booklet
enclosed with your radio.
ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF energy
exposure requirements. Before using this product, read the RF energy
awareness information and operating instructions in the Product Safety and RF
Exposure booklet enclosed with your radio (Motorola Publication part number
68P81095C98) to ensure compliance with RF energy exposure limits.
For a list of Motorola-approved antennas, batteries, and other accessories, visit the
following web site which lists approved accessories: http://www.motorola.com/
cgiss/index.shtml.
intro.fm Page 5 Tuesday, August 30, 2005 12:04 PM
Introduction
Thank you for purchasing a Motorola ELB Series two-way radio product. The
Motorola ELB Series two-way radio models are products of Motorola’s 75-plus
years of experience as a world leader in designing and manufacturing
communications equipment.
Product registration is an important step. Registering helps facilitate warranty
service and permits us to contact you should your Motorola product require an
update or other service.
To register your product on-line, visit www.motorola.com/warranty/radios. Please
retain your original dated sales receipt for your records. For warranty service of
your Motorola product, you will need to provide a copy of your dated sales receipt
to confirm warranty status. Registration is not required for warranty coverage.
Introduction
The ELB Series two-way radios are a perfect cost-effective communications
solution for all of today’s fast-paced businesses and industries.
Note: Please be sure to save this programming instructions for further reference.
getstart.fm Page 6 Friday, September 2, 2005 2:34 PM
Radio Controls
Display
Use P to:
Turn radio on/off
Adjust radio volume
Radio Controls
LED
Accessory Jack
Use Push to Talk to:
Talk
Exit a menu
ELB1210
Use
to:
Monitor the frequency
MON
MENU
MIC
Microphone
MON
Use
to:
Lock the keypad
Scroll through menus
Use
and
to:
Change channels
Change menu settings
Use
to:
Transmit a Call Tone
Speaker
MENU
getstart.fm Page 7 Friday, September 2, 2005 2:34 PM
Reading the Display
Note: The radio display shown here is for icon location only. Each radio display may appear
different (channel and code) based on the pre-programmed radio defaults.
Keypad Lock
Battery Meter
Frequency and
Interference
Eliminator Code
Programming Mode
Interference Eliminator
Code Indicator
Frequency Indicator
Channel
Radio Controls
Signal Strength and Channel Busy Indicator
VOX
getstart.fm Page 8 Friday, September 2, 2005 2:34 PM
Getting Started
Getting Started
This user’s guide covers multiple ELB Series models, and may detail some features
your radio does not have. Your model number is shown on the front of the radio
below the radio display, and informs you of the following information.
Model
Frequency Band
Watts
Number of Channels
ELB1110
UHF
ELB1110
VHF
ELB1210
UHF
ELB1210
VHF
getstart.fm Page 9 Friday, September 2, 2005 2:34 PM
Installing the Nickel-Metal Hydride Battery
The ELB Series radio operates using a Nickel-Metal Hydride (NiMH) rechargeable
battery pack, which proves up to 9 hours1 of usage. A battery, transformer, and dropin charger tray are supplied with your radio.
1. Make sure your radio is turned off, by turning the
volume knob counterclockwise.
2. Remove the belt clip, if necessary (see page 11).
3. With the radio back facing you, push the latch on the
bottom of the radio away from you and slide the battery
cover downward, toward you.
4. Insert the NiMH battery. Read battery pack installation
instructions for appropriate fit.
5. Slide and snap the battery cover into place.
Getting Started
DO NOT disassemble the NiMH battery pack.
Note: Remove batteries before storing your radio for extended periods. Batteries corrode
over time and may cause permanent damage to your radio. Exercise caution when
handling batteries that are leaking. Dispose of exhausted batteries at a designated
battery disposal unit and not in the household waste.
1. Based on a standard duty cycle of 5% Transmit, 5% Receive, and 90% Standby.
getstart.fm Page 10 Friday, September 2, 2005 2:34 PM
Getting Started
Charging using the 53xxx Drop-In Charging Tray
10
The Drop-in Charging Tray can be placed on any flat surface and provides drop-in
charging convenience. The battery must be charged while inside of the radio.
1. Connect the transformer and the drop-in tray
by inserting the plug of the transformer into
the rear jack of the drop-in charging tray.
2. Plug the transformer into an AC outlet.
3. Turn the radio off. If the radio is on while
charging, it will take longer to fully charge.
4. Insert the radio (with battery installed) into
the charging tray pocket with the radio front
facing the front of the charger.
EL
B1
MIC
210
ME
NU
MO
getstart.fm Page 11 Friday, September 2, 2005 2:34 PM
Battery Meter
Battery Type
NiMH
3 Bars
2 Bars
1 Bar
Flashing
100%–85%
85%–25%
25%–10%
Final 10%
Attaching the Belt Clip
Your radio includes a belt clip for your convenience.
1. To attach the belt clip, slide the belt clip into the
grooves on the top of the radio and slide it down
until it clicks into place.
2. To remove, pull back the release latch on the top
of the belt clip and slide the belt clip up and away
from the radio.
Getting Started
The battery meter in the upper left corner of the display shows how much battery
power is remaining.
Note: In case of loss, please contact your point-of-sales
or call 1-800-353-2729 and request a replacement
part number (53xxx for the ELB1110 or 53xxx for
the ELB1210).
11
getstart.fm Page 12 Friday, September 2, 2005 2:34 PM
Turning the Radio On and Off
See “Radio Controls” on page 6 for a basic radio diagram.
Turn P clockwise to turn the radio ON, and counterclockwise to turn the radio OFF.
Getting Started
When you turn the radio on, the radio chirps and the display briefly shows all features
and display segments. The LED on the front left of the radio flashes every three
seconds when the radio is ON.
The radio then displays the current channel (larger number) and the
frequency assigned to that channel (on the right indicated by l).
The Interference Eliminator Code displays briefly (indicated by
y). The code will then disappear and the current channel remains
displayed.
Adjusting the Volume
Turn P clockwise to increase the volume, and counterclockwise to
decrease the volume.
Note: Do not hold the radio too close to your ear when adjusting the volume.
12
operation.fm Page 13 Tuesday, August 30, 2005 1:16 PM
Talking and Receiving
Basic Radio Operation
It is good radio practice to monitor the channel you intend to use before transmitting.
This practice ensures that you do not interrupt other users already on that same channel.
To check for Channel activity, press and listen. If you hear static, then the channel
is free for use. If someone is already speaking on that channel do not transmit. Press
again to stop monitoring.
MON
1. To talk, press and hold the Push to Talk button and speak into the microphone.
To maximize clarity, hold the radio 2 to 3 inches away from your mouth.
2. To listen, release the Push to Talk button.
Note: The LED on the front left of the radio lights a steady red when transmitting.
Signal Strength Indicator
When there is activity on a frequency, the radio displays w and the
LED flashes once per second.
Talking and Receiving
MON
When there is activity on the same frequency and code as your radio
(your radio is receiving), the radio displays w and a signal strength
from 1 (weakest) to 6 (strongest). This can help determine when a radio is moving
out of range.
Note: Obstacles that block the signal path may affect the strength of the incoming signal.
13
operation.fm Page 14 Tuesday, August 30, 2005 1:16 PM
Programming Mode
Programming Mode
In order to speak with someone on your two-way radios, the following features must
be set to the exact settings on all radios:
• Channel: The current channel that the radio is using to transmit.
• Frequency: The frequency your radio is using to transmit or receive (see page
XX).
• Interference Eliminator Code: These codes help to minimize interference by
providing you with a choice of code combinations (see page XX).
Entering Programming Mode
To Do This
Press These Buttons While Turning
the Radio ON
Channel
Push to Talk button and
Frequency
Push to Talk button and
Interference Eliminator Code
MON
MENU
(this will disable “End of Transmission Tone”
Once in Programming Mode, the radio beeps and displays k.
14
Note: If you press and release the Push to Talk button when programming, you will exit
Programming Mode.
operation.fm Page 15 Tuesday, August 30, 2005 1:16 PM
Make sure kis displayed. See Entering Programming Mode for instructions on
how to access.
2. Press or until the desired Channel is selected.
3. Press the Push to Talk button to exit.
Frequency
1. Press
MENU
once, the lindicator displays and the Frequency flashes.
2. Press or to choose the desired Frequency.
3. Press the Push to Talk button to exit.
Interference Eliminator Code
1. Select the channel on which you wish to change the Code.
2. To set the Code, press
MENU
Programming Mode
Channel
1. The Channel number flashes and the land y indicators display
alternately.
until the Code number display begins to flash.
3. Press or to select the desired Code.
4. Press the Push to Talk button to exit.
Note: To hear everyone on your frequency, select Interference Eliminator Code 0.
15
operation.fm Page 16 Tuesday, August 30, 2005 1:16 PM
To Specify a Different Code for Each Channel (ELB1210 Only)
1. Press
MON
and then press
or
to select the Channel.
2. Press again and then press or to select the desired Code.
3. Press the Push to Talk button to set and exit.
Programming Mode
MON
16
operation.fm Page 17 Tuesday, August 30, 2005 1:16 PM
Features
Call Tone
ELB1110
1 Call Tone plus Off
ELB1210
2 Call Tones plus Off
To Set the Call Tones
1. Press
MENU
until Edisplays.
2. Press or hear and select a Call Tone.
3. Setting the Call Tone to 0 sets the Call Tones to OFF.
4. Press
MENU
Features
Your radio can transmit Call Tones to other radios in your group so you can alert
them that you are about to talk. Once the Call Tone is set, press
to transmit the
Call Tone to others. The number of Call Tones supported by your radio is based on
model:
to exit
Note: The default is set to 0, Call Tones are OFF.
17
operation.fm Page 18 Tuesday, August 30, 2005 1:16 PM
Hands-Free Use/VOX (ELB1210 Only)
Features
This feature allows you to activate the radio transmitter with your voice by using a
Motorola authorized audio accessory, instead of having to press the Push to Talk
button.
It is recommended that the radio volume level be kept to a minimum until the audio
accessory is put in place and your radio is turned on to adjust the volume to a user's
volume preference.
1. Turn the radio OFF.
2. Open the accessory cover.
3. Insert the audio accessory plug firmly into the accessory jack.
4. Turn the radio ON. The g icon will display. If flashing, press the Push to Talk
button to re-enable VOX.
5. To transmit, speak into the accessory microphone. To receive, stop talking.
6. To disable VOX operation, press the Push to Talk button or simply remove the
audio accessory.
Note: There is a short delay between the start of a voice transmission and when the radio
transmits.
18
operation.fm Page 19 Tuesday, August 30, 2005 1:16 PM
Locking the Keypad
You can lock the keypad buttons to avoid accidentally changing your radio settings.
1. To lock the keypad, press and hold
MENU
for 3 seconds.
Note: The f icon will display.
2. To unlock, press and hold
MENU
for 3 seconds.
If enabled, your two-way radio transmits a tone when you finish transmitting. It is like
saying Roger or Over.
1. To enable, press and hold
as you turn the radio ON.
2. To disable, simply turn your radio OFF and press and hold
radio ON.
as you turn the
Features
End-of-Transmission Tone
Time-Out Timer
The radio will emit a warning tone and will stop transmitting if the Push to Talk
button is pressed for more than 60 seconds continuously.
19
operation.fm Page 20 Tuesday, August 30, 2005 1:16 PM
Frequency and Code Charts
Frequency and Code Charts
20
The charts on the following pages provide Frequency and Code information. These
charts are useful when using Motorola ELB Series two-way radios with other
business radios. Frequency position is identical to Spirit M, GT, S, and XTN Series
Frequencies (where applicable).
VHF Frequencies
Frequency
(MHz)
Bandwidth
Frequency
(MHz)
Bandwidth
10
11
12
13
14
15
151.6250
151.9550
154.5700
154.6000
151.7000
151.7600
151.8200
151.8800
151.9400
151.5125
151.6550
151.6850
151.7150
151.7450
151.7750
25.0
25.0
25.0
25.0
12.5/25.0
12.5/25.0
12.5/25.0
12.5/25.0
25.0
25.0
25.0
125.0
25.0
25.0
25.0
16
17
18
19
20
21
22
23
24
25
26
27
151.8650
151.8950
151.9250
152.7000
154.4900
154.5150
154.5275
154.5400
154.6000
154.6550
158.4000
158.4075
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
operation.fm Page 21 Tuesday, August 30, 2005 1:16 PM
Frequency
(MHz)
Bandwidth
Frequency
(MHz)
Bandwidth
10
11
12
13
14
15
16
17
18
19
464.5000
464.5500
467.7625
467.8125
467.8500
467.8750
467.9000
467.9250
461.0375
461.0625
461.0875
461.1125
461.1375
461.1625
461.1875
461.2125
461.2375
461.2625
461.2875
12.5/25.0
12.5/25.0
12.5
12.5
12.5/25.0
12.5/25.0
12.5/25.0
12.5/25.0
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
461.3125
461.3375
461.3625
462.7625
462.7875
462.8125
462.8375
462.8625
462.8875
462.9125
464.4875
464.5125
464.5375
464.5625
466.0375
466.0625
466.0875
466.1125
466.1375
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
Frequency and Code Charts
UHF Frequencies
21
operation.fm Page 22 Tuesday, August 30, 2005 1:16 PM
Frequency and Code Charts
UHF Frequencies (Continued)
22
Frequency
(MHz)
Bandwidth
Frequency
(MHz)
Bandwidth
39
40
41
42
43
44
45
46
47
466.1625
466.1875
466.2125
466.2375
466.2625
466.2875
466.3125
466.3375
466.3625
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
48
49
50
51
52
53
54
55
56
467.7875
467.8375
467.8625
467.8875
467.9125
469.4875
469.5125
469.5375
469.5625
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
operation.fm Page 23 Tuesday, August 30, 2005 1:16 PM
Code
Hz
Code
Hz
Code
Hz
10
11
12
13
67.0
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
14
15
16
17
18
19
20
21
22
23
24
25
26
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
162.2
27
28
29
30
31
32
33
34
35
36
37
38
167.9
173.8
179.9
186.2
192.8
203.5
210.7
218.1
225.7
233.6
241.8
250.3
Frequency and Code Charts
Interference Eliminator Codes
23
operation.fm Page 24 Tuesday, August 30, 2005 1:16 PM
Frequency and Code Charts
Digital Interference Eliminator Codes
24
Code
Hz
Code
Hz
Code
Hz
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
023
025
026
031
032
043
047
051
054
065
071
072
073
074
114
115
116
125
131
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
132
134
143
152
155
156
162
165
172
174
205
223
226
243
244
245
251
261
263
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
265
271
306
311
315
331
343
346
351
364
365
371
411
412
413
423
431
432
445
operation.fm Page 25 Tuesday, August 30, 2005 1:16 PM
Code
Hz
Code
Hz
Code
Hz
96
97
98
99
100
101
102
103
104
464
465
466
503
506
516
532
546
565
105
106
107
108
109
110
111
112
113
606
612
624
627
631
632
654
662
664
114
115
116
117
118
119
120
121
703
712
723
731
732
734
743
754
Frequency and Code Charts
Digital Interference Eliminator Codes (Continued)
25
operation.fm Page 26 Tuesday, August 30, 2005 1:16 PM
Troubleshooting
Troubleshooting
Symptom
Try This:
No Power
Reposition, recharge or replace NiMH battery pack.
Message not
transmitting
Make sure the Push to Talk button is completely pressed while
transmitting.
Reposition, recharge, replace the NiMH battery pack.
Message not
received
Confirm that all radios have the same channel, frequency, and
interference eliminator code settings.
Make sure that the Push to Talk button is not inadvertently
being pressed. Reposition, recharge, or replace the NiMH
battery pack.
Obstructions and operating indoors or in vehicles may interfere change location.
Hearing
conversation or Check that the Interference Eliminator Code setting is not set to
noise on a
0. A shared channel may be in use, try another.
channel
26
Symptom
Try This:
Limited talk
range
Steel and/or concrete structures, heavy foliage, buildings, or
vehicles decrease range. Check for a clear line of sight to
improve transmission.
Wearing the radio close to the body such as in a pocket or on a
belt decreases range. Change location of the radio.
Heavy static or
interference
Radios are too close to one another. They must be at least
5 feet apart.
Obstacles are interfering with transmission.
Keypad locked
Make sure menu us unlocked. Unlock by holding
3 seconds.
Low batteries
Recharge or replace NiMH battery pack. Extreme operating
temperatures affect battery life.
Charger light
does not come
on
Check that radio/battery is properly inserted and check battery/
charger contacts to be sure they are clean.
Verify that the charging pin is inserted correctly.
MENU
for
Troubleshooting
operation.fm Page 27 Tuesday, August 30, 2005 1:16 PM
27
Troubleshooting
operation.fm Page 28 Tuesday, August 30, 2005 1:16 PM
28
warranty.fm Page 29 Tuesday, August 30, 2005 12:56 PM
Limited Warranty
MOTOROLA COMMUNICATIONS PRODUCTS
Purchased in the United States and Canada
Warranty
•
•
•
II.
What This Warranty Covers
Products. Defects in materials and workmanship in wireless cellular
telephones, pagers, and/or two-way radios, and certain accessories that are
sold with them, such as the battery, battery charger, and holster manufactured
and/or sold by MOTOROLA.
Batteries. Defects in materials and workmanship in batteries that are
manufactured by MOTOROLA and/or sold with Products are covered by this
warranty only if the fully-charged capacity falls below 80% of rated capacity or
they leak.
Software. Physical defects in the media that tangibly embodies each copy of
any software supplied with the Products.
Limited Warranty
I.
What the Period of Coverage Is
From the date the Products are purchased by the first end-user:
• Products. The warranty is for one year.
• Software. The warranty is for 90 days.
29
warranty.fm Page 30 Tuesday, August 30, 2005 12:56 PM
•
Repairs/Replacements. The warranty is for the balance of the original warranty
or for 90 days from the date you receive it, whichever is longer.
III. Who is Covered
This warranty extends to the first end-user purchaser only.
Limited Warranty
IV. What We Will Do to Correct Warranty Problems
At no charge to you, we have the option to repair or replace the Products or software
that do not conform to the warranty, or to refund the Products’ purchase price. We
may use functionally equivalent reconditioned/refurbished/pre-owned or new
Products or parts. No software updates are provided.
V. How to Obtain Warranty Service or Other Information
USA
Two-Way Radios 1-800-448-6686
Canada
All Products 1-800-461-4575
TTY
TTY 1-888-390-6456
For Accessories and Software, please call the telephone number designated
above.
30
You will receive instructions on how to ship the Products to MOTOROLA. You must
ship the Products to us with freight, duties and insurance prepaid. Along with the
Products you must include: (a) a copy of your receipt, bill of sale or other comparable
warranty.fm Page 31 Tuesday, August 30, 2005 12:56 PM
We will ship repaired or replacement Products at our expense for the freight and
insurance, but at your expense for any duties. If additional information is needed,
please contact us at the telephone number listed on page 30.
VI. What This Warranty Does Not Cover
•
•
•
Products that are operated in combination with ancillary or peripheral equipment
or software not furnished by MOTOROLA for use with the Products (“ancillary
equipment”), or any damage to the Products or ancillary equipment as a result
of such use. Among other things, “ancillary equipment” includes batteries,
chargers, adaptors, and power supplies not manufactured or supplied by
MOTOROLA. Any of these voids the warranty.
Someone other than MOTOROLA (or its authorized service centers) tests,
adjusts, installs, maintains, alters, modifies, or services the Products in any way.
Any of these voids the warranty.
Rechargeable batteries that: (a) are charged by other than the MOTOROLA
approved battery charger specified for charging such batteries; (b) have any
broken seals or show evidence of tampering; (c) are used in equipment other
Limited Warranty
proof of purchase; (b) a written description of the problem; (c) the name of your
service provider (if this Product requires subscription service); (d) the name and
location of the installation facility (if applicable) and, most importantly; (e) your
address and telephone number. If requested, you must also return all detachable
parts such as antennas, batteries and chargers. RETAIN YOUR ORIGINAL PROOF
OF PURCHASE.
31
warranty.fm Page 32 Tuesday, August 30, 2005 12:56 PM
Limited Warranty
•
•
•
•
•
•
than the Product for which they are specified; or (d) are charged and stored at
temperatures greater than 60 degrees centigrade. Any of these voids the
warranty.
Products that have: (a) serial numbers or date tags that have been removed,
altered, or obliterated; (b) board serial numbers that do not match each other, or
board serial numbers that do not match the housing; or (c) nonconforming or
non-MOTOROLA housings or parts. Any of these voids the warranty.
Defects or damage that result from: (a) use of the Products in a manner that is
not normal or customary; (b) improper operation or misuse; (c) accident or
neglect such as dropping the Products onto hard surfaces; (d) contact with
water, rain, extreme humidity, or heavy perspiration; (e) contact with sand, dirt or
the like; or (f) contact with extreme heat, or spills of food or liquid.
Physical damage to the surface of the Products, including scratches, cracks, or
other damage to a display screen, lens, or other externally exposed parts.
Failure of Products that is due primarily to any communication service or signal
you may subscribe to or use with the Products.
Coil cords that are stretched or that have any broken modular tabs.
Products that are leased.
Flat-rate repair rates may apply to Products not covered by this warranty. To obtain
information about Products needing repairs that are not covered by this warranty,
32
warranty.fm Page 33 Tuesday, August 30, 2005 12:56 PM
please call the telephone number previously listed. We will provide information on
repair availability, rates, methods of payment, where to send the Products, etc.
This is MOTOROLA’s complete warranty for the Products, and states your exclusive
remedies. This warranty is given in lieu of all other express warranties. Implied
warranties, including without limitation, the implied warranties of merchantability and
fitness for a particular purpose, are given only if specifically required by applicable
law. Otherwise, they are specifically excluded.
No warranty is made as to coverage, availability, or grade of service provided by the
Products, whether through a service provider or otherwise.
No warranty is made that the software will meet your requirements or will work in
combination with any hardware or applications software products provided by third
parties, that the operation of the software products will be uninterrupted or error free,
or that all defects in the software products will be corrected.
Limited Warranty
VII. Some Other Limitations
In no event shall MOTOROLA be liable, whether in contract or tort (including
negligence) for damages in excess of the purchase price of the Product, or for any
indirect, incidental, special or consequential damages of any kind, or loss of revenue
or profits, loss of business, loss of information or data, or other financial loss arising
out of or in connection with the ability or inability to use the Products, to the full extent
these damages may be disclaimed by law.
33
warranty.fm Page 34 Tuesday, August 30, 2005 12:56 PM
VIII. Patent and Software Provisions
At MOTOROLA’s expense, we will defend you, and pay costs and damages that
may be finally awarded against you, to the extent that a lawsuit is based on a claim
that the Products directly infringe a United States patent. Our obligation is
conditioned on:
Limited Warranty
A. you notifying us promptly in writing when you receive notice of the claim;
B. you giving us sole control of the defense of the suit and all negotiations for its
settlement or compromise; and
C. should the Products become, or in Motorola's opinion be likely to become, the
subject of a claim of infringement of a United States patent, you permit us, at our
option and expense, either to: procure for you the right to continue using the
Products; replace or modify them so that they become non-infringing; or grant
you a credit for such Products, as depreciated, and accept their return. The
depreciation will be an equal amount per year over the lifetime of the Products,
as established by MOTOROLA.
MOTOROLA will have no liability to you with respect to any claim of patent
infringement that is based upon the combination of the Products or parts furnished
under this limited warranty with ancillary equipment, as defined in VI.
This is MOTOROLA’s entire liability with respect to infringement of patents by the
Products.
34
warranty.fm Page 35 Tuesday, August 30, 2005 12:56 PM
Some states and other jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages, or limitation on the length of an implied
warranty, so the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights, which vary from
jurisdiction to jurisdiction.
Limited Warranty
Laws in the United States and other countries preserve for MOTOROLA and other
third party software providers certain exclusive rights for copyrighted software, such
as the exclusive rights to reproduce in copies and distribute copies of such software.
The software may be copied into, used in and redistributed with only those Products
that are associated with such software. No other use, including without limitation,
disassembly or reverse engineering of such software or exercise of exclusive rights
in such software is permitted.
35
Limited Warranty
warranty.fm Page 36 Tuesday, August 30, 2005 12:56 PM
36
6864110w15oTOC.fm Page 2 Wednesday, August 17, 2005 11:20 AM
MOTOROLA and the Stylized M Logo are registered in the
U.S. Patent and Trademark Office. All other product or
service names are the property of their respective owners.
© Motorola, Inc. 2005.
*6880309S90*
6880309S90-O

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
About                           : uuid:bab32c04-6602-4596-9ca6-8e8c5f59f189
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2005:09:12 10:59:07-04:00
Create Date                     : 2005:08:16 13:21:36-05:00
Metadata Date                   : 2005:09:12 10:59:07-04:00
Document ID                     : uuid:3bf5011a-e0ae-4fee-8bb6-1832390fe988
Instance ID                     : uuid:f716dbf2-037a-451c-843a-f39ef0324c8f
Format                          : application/pdf
Title                           : cover.eps
Creator                         : ckc015
Has XFA                         : No
Page Count                      : 40
Page Layout                     : SinglePage
Author                          : ckc015

EXIF Metadata provided by EXIF.tools