Motorola Solutions 89FT3811 ELB VHF 2-Way Radio (RLD1036A) User Manual cover eps
Motorola Solutions, Inc. ELB VHF 2-Way Radio (RLD1036A) cover eps
Contents
- 1. Ex 8 User Manual
- 2. Ex8A RF Safety Booklet
Ex 8 User Manual
ELB Series Two-Way Radio's User Guide 6864110w15oTOC.fm Page 2 Wednesday, August 17, 2005 11:20 AM TOC.fm Page 1 Tuesday, August 30, 2005 12:03 PM Contents FCC Licensing Information .......... 2 Product Safety and RF Exposure Compliance............................... 4 Introduction ................................... 5 Radio Controls .............................. 6 Reading the Display .................... 7 Getting Started .............................. 8 Installing the Nickel-Metal Hydride Battery ...................................... 9 Charging using the 53xxx Drop-In Charging Tray......................... 10 Battery Meter ............................. 11 Attaching the Belt Clip ............... 11 Turning the Radio On and Off ... 12 Adjusting the Volume................. 12 Features........................................ 17 Call Tone.................................... 17 Hands-Free Use/VOX (ELB1210 Only) ....................................... 18 Locking the Keypad ................... 19 End-of-Transmission Tone......... 19 Time-Out Timer .......................... 19 Frequency and Code Charts....... 20 Troubleshooting ......................... 26 Limited Warranty ......................... 29 Talking and Receiving ................ 13 Basic Radio Operation............... 13 Signal Strength Indicator ........... 13 Programming Mode .................... 14 Entering Programming Mode..... 14 fcc.fm Page 2 Tuesday, August 30, 2005 12:03 PM FCC Licensing Information FCC Licensing Information ELB Series professional two-way radios operate on radio frequencies that are regulated by the Federal Communications Commission (FCC). In order to transmit on these frequencies, you are required to have a license issued by the FCC. Application is made available on FCC Forms 601, schedules D and H, and remittance form 159. If ordering the forms by mail, phone, or from the FCC website, please request document number 000601, which includes all forms and instructions. If using the FCC Fax-on-Demand system, use the 7-digit order numbers listed below. To obtain the required forms, please use the following contact information: By Phone or Web Faxed Mailed or for questions contact the Fax-On-Demand call the FCC forms hotline regarding FCC license system at: at: contact the FCC at: 1-888-CALL-FCC 1-800-418-FORM 1-202-418-0177 1-888-225-5322 1-800-418-3676 or: http://www.fcc.gov Request forms 3060001, Request document 000601 Request document 000601 3060003, and 3060006 Before filling out your application, you must decide which frequency(ies) you can operate on. See Frequency and Code Charts on page 20. For questions on determining your radio frequency, please call Motorola Product Services at 1-800-448-6686. Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. Note: Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited. FCC Licensing Information fcc.fm Page 3 Tuesday, August 30, 2005 12:03 PM safety.fm Page 4 Tuesday, August 30, 2005 12:04 PM Product Safety and RF Exposure Compli- Product Safety and RF Exposure Compliance Caution Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68P81095C98) to ensure compliance with RF energy exposure limits. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/ cgiss/index.shtml. intro.fm Page 5 Tuesday, August 30, 2005 12:04 PM Introduction Thank you for purchasing a Motorola ELB Series two-way radio product. The Motorola ELB Series two-way radio models are products of Motorola’s 75-plus years of experience as a world leader in designing and manufacturing communications equipment. Product registration is an important step. Registering helps facilitate warranty service and permits us to contact you should your Motorola product require an update or other service. To register your product on-line, visit www.motorola.com/warranty/radios. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. Introduction The ELB Series two-way radios are a perfect cost-effective communications solution for all of today’s fast-paced businesses and industries. Note: Please be sure to save this programming instructions for further reference. getstart.fm Page 6 Friday, September 2, 2005 2:34 PM Radio Controls Display Use P to: Turn radio on/off Adjust radio volume Radio Controls LED Accessory Jack Use Push to Talk to: Talk Exit a menu ELB1210 Use to: Monitor the frequency MON MENU MIC Microphone MON Use to: Lock the keypad Scroll through menus Use and to: Change channels Change menu settings Use to: Transmit a Call Tone Speaker MENU getstart.fm Page 7 Friday, September 2, 2005 2:34 PM Reading the Display Note: The radio display shown here is for icon location only. Each radio display may appear different (channel and code) based on the pre-programmed radio defaults. Keypad Lock Battery Meter Frequency and Interference Eliminator Code Programming Mode Interference Eliminator Code Indicator Frequency Indicator Channel Radio Controls Signal Strength and Channel Busy Indicator VOX getstart.fm Page 8 Friday, September 2, 2005 2:34 PM Getting Started Getting Started This user’s guide covers multiple ELB Series models, and may detail some features your radio does not have. Your model number is shown on the front of the radio below the radio display, and informs you of the following information. Model Frequency Band Watts Number of Channels ELB1110 UHF ELB1110 VHF ELB1210 UHF ELB1210 VHF getstart.fm Page 9 Friday, September 2, 2005 2:34 PM Installing the Nickel-Metal Hydride Battery The ELB Series radio operates using a Nickel-Metal Hydride (NiMH) rechargeable battery pack, which proves up to 9 hours1 of usage. A battery, transformer, and dropin charger tray are supplied with your radio. 1. Make sure your radio is turned off, by turning the volume knob counterclockwise. 2. Remove the belt clip, if necessary (see page 11). 3. With the radio back facing you, push the latch on the bottom of the radio away from you and slide the battery cover downward, toward you. 4. Insert the NiMH battery. Read battery pack installation instructions for appropriate fit. 5. Slide and snap the battery cover into place. Getting Started DO NOT disassemble the NiMH battery pack. Note: Remove batteries before storing your radio for extended periods. Batteries corrode over time and may cause permanent damage to your radio. Exercise caution when handling batteries that are leaking. Dispose of exhausted batteries at a designated battery disposal unit and not in the household waste. 1. Based on a standard duty cycle of 5% Transmit, 5% Receive, and 90% Standby. getstart.fm Page 10 Friday, September 2, 2005 2:34 PM Getting Started Charging using the 53xxx Drop-In Charging Tray 10 The Drop-in Charging Tray can be placed on any flat surface and provides drop-in charging convenience. The battery must be charged while inside of the radio. 1. Connect the transformer and the drop-in tray by inserting the plug of the transformer into the rear jack of the drop-in charging tray. 2. Plug the transformer into an AC outlet. 3. Turn the radio off. If the radio is on while charging, it will take longer to fully charge. 4. Insert the radio (with battery installed) into the charging tray pocket with the radio front facing the front of the charger. EL B1 MIC 210 ME NU MO getstart.fm Page 11 Friday, September 2, 2005 2:34 PM Battery Meter Battery Type NiMH 3 Bars 2 Bars 1 Bar Flashing 100%–85% 85%–25% 25%–10% Final 10% Attaching the Belt Clip Your radio includes a belt clip for your convenience. 1. To attach the belt clip, slide the belt clip into the grooves on the top of the radio and slide it down until it clicks into place. 2. To remove, pull back the release latch on the top of the belt clip and slide the belt clip up and away from the radio. Getting Started The battery meter in the upper left corner of the display shows how much battery power is remaining. Note: In case of loss, please contact your point-of-sales or call 1-800-353-2729 and request a replacement part number (53xxx for the ELB1110 or 53xxx for the ELB1210). 11 getstart.fm Page 12 Friday, September 2, 2005 2:34 PM Turning the Radio On and Off See “Radio Controls” on page 6 for a basic radio diagram. Turn P clockwise to turn the radio ON, and counterclockwise to turn the radio OFF. Getting Started When you turn the radio on, the radio chirps and the display briefly shows all features and display segments. The LED on the front left of the radio flashes every three seconds when the radio is ON. The radio then displays the current channel (larger number) and the frequency assigned to that channel (on the right indicated by l). The Interference Eliminator Code displays briefly (indicated by y). The code will then disappear and the current channel remains displayed. Adjusting the Volume Turn P clockwise to increase the volume, and counterclockwise to decrease the volume. Note: Do not hold the radio too close to your ear when adjusting the volume. 12 operation.fm Page 13 Tuesday, August 30, 2005 1:16 PM Talking and Receiving Basic Radio Operation It is good radio practice to monitor the channel you intend to use before transmitting. This practice ensures that you do not interrupt other users already on that same channel. To check for Channel activity, press and listen. If you hear static, then the channel is free for use. If someone is already speaking on that channel do not transmit. Press again to stop monitoring. MON 1. To talk, press and hold the Push to Talk button and speak into the microphone. To maximize clarity, hold the radio 2 to 3 inches away from your mouth. 2. To listen, release the Push to Talk button. Note: The LED on the front left of the radio lights a steady red when transmitting. Signal Strength Indicator When there is activity on a frequency, the radio displays w and the LED flashes once per second. Talking and Receiving MON When there is activity on the same frequency and code as your radio (your radio is receiving), the radio displays w and a signal strength from 1 (weakest) to 6 (strongest). This can help determine when a radio is moving out of range. Note: Obstacles that block the signal path may affect the strength of the incoming signal. 13 operation.fm Page 14 Tuesday, August 30, 2005 1:16 PM Programming Mode Programming Mode In order to speak with someone on your two-way radios, the following features must be set to the exact settings on all radios: • Channel: The current channel that the radio is using to transmit. • Frequency: The frequency your radio is using to transmit or receive (see page XX). • Interference Eliminator Code: These codes help to minimize interference by providing you with a choice of code combinations (see page XX). Entering Programming Mode To Do This Press These Buttons While Turning the Radio ON Channel Push to Talk button and Frequency Push to Talk button and Interference Eliminator Code MON MENU (this will disable “End of Transmission Tone” Once in Programming Mode, the radio beeps and displays k. 14 Note: If you press and release the Push to Talk button when programming, you will exit Programming Mode. operation.fm Page 15 Tuesday, August 30, 2005 1:16 PM Make sure kis displayed. See Entering Programming Mode for instructions on how to access. 2. Press or until the desired Channel is selected. 3. Press the Push to Talk button to exit. Frequency 1. Press MENU once, the lindicator displays and the Frequency flashes. 2. Press or to choose the desired Frequency. 3. Press the Push to Talk button to exit. Interference Eliminator Code 1. Select the channel on which you wish to change the Code. 2. To set the Code, press MENU Programming Mode Channel 1. The Channel number flashes and the land y indicators display alternately. until the Code number display begins to flash. 3. Press or to select the desired Code. 4. Press the Push to Talk button to exit. Note: To hear everyone on your frequency, select Interference Eliminator Code 0. 15 operation.fm Page 16 Tuesday, August 30, 2005 1:16 PM To Specify a Different Code for Each Channel (ELB1210 Only) 1. Press MON and then press or to select the Channel. 2. Press again and then press or to select the desired Code. 3. Press the Push to Talk button to set and exit. Programming Mode MON 16 operation.fm Page 17 Tuesday, August 30, 2005 1:16 PM Features Call Tone ELB1110 1 Call Tone plus Off ELB1210 2 Call Tones plus Off To Set the Call Tones 1. Press MENU until Edisplays. 2. Press or hear and select a Call Tone. 3. Setting the Call Tone to 0 sets the Call Tones to OFF. 4. Press MENU Features Your radio can transmit Call Tones to other radios in your group so you can alert them that you are about to talk. Once the Call Tone is set, press to transmit the Call Tone to others. The number of Call Tones supported by your radio is based on model: to exit Note: The default is set to 0, Call Tones are OFF. 17 operation.fm Page 18 Tuesday, August 30, 2005 1:16 PM Hands-Free Use/VOX (ELB1210 Only) Features This feature allows you to activate the radio transmitter with your voice by using a Motorola authorized audio accessory, instead of having to press the Push to Talk button. It is recommended that the radio volume level be kept to a minimum until the audio accessory is put in place and your radio is turned on to adjust the volume to a user's volume preference. 1. Turn the radio OFF. 2. Open the accessory cover. 3. Insert the audio accessory plug firmly into the accessory jack. 4. Turn the radio ON. The g icon will display. If flashing, press the Push to Talk button to re-enable VOX. 5. To transmit, speak into the accessory microphone. To receive, stop talking. 6. To disable VOX operation, press the Push to Talk button or simply remove the audio accessory. Note: There is a short delay between the start of a voice transmission and when the radio transmits. 18 operation.fm Page 19 Tuesday, August 30, 2005 1:16 PM Locking the Keypad You can lock the keypad buttons to avoid accidentally changing your radio settings. 1. To lock the keypad, press and hold MENU for 3 seconds. Note: The f icon will display. 2. To unlock, press and hold MENU for 3 seconds. If enabled, your two-way radio transmits a tone when you finish transmitting. It is like saying Roger or Over. 1. To enable, press and hold as you turn the radio ON. 2. To disable, simply turn your radio OFF and press and hold radio ON. as you turn the Features End-of-Transmission Tone Time-Out Timer The radio will emit a warning tone and will stop transmitting if the Push to Talk button is pressed for more than 60 seconds continuously. 19 operation.fm Page 20 Tuesday, August 30, 2005 1:16 PM Frequency and Code Charts Frequency and Code Charts 20 The charts on the following pages provide Frequency and Code information. These charts are useful when using Motorola ELB Series two-way radios with other business radios. Frequency position is identical to Spirit M, GT, S, and XTN Series Frequencies (where applicable). VHF Frequencies Frequency (MHz) Bandwidth Frequency (MHz) Bandwidth 10 11 12 13 14 15 151.6250 151.9550 154.5700 154.6000 151.7000 151.7600 151.8200 151.8800 151.9400 151.5125 151.6550 151.6850 151.7150 151.7450 151.7750 25.0 25.0 25.0 25.0 12.5/25.0 12.5/25.0 12.5/25.0 12.5/25.0 25.0 25.0 25.0 125.0 25.0 25.0 25.0 16 17 18 19 20 21 22 23 24 25 26 27 151.8650 151.8950 151.9250 152.7000 154.4900 154.5150 154.5275 154.5400 154.6000 154.6550 158.4000 158.4075 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 operation.fm Page 21 Tuesday, August 30, 2005 1:16 PM Frequency (MHz) Bandwidth Frequency (MHz) Bandwidth 10 11 12 13 14 15 16 17 18 19 464.5000 464.5500 467.7625 467.8125 467.8500 467.8750 467.9000 467.9250 461.0375 461.0625 461.0875 461.1125 461.1375 461.1625 461.1875 461.2125 461.2375 461.2625 461.2875 12.5/25.0 12.5/25.0 12.5 12.5 12.5/25.0 12.5/25.0 12.5/25.0 12.5/25.0 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 461.3125 461.3375 461.3625 462.7625 462.7875 462.8125 462.8375 462.8625 462.8875 462.9125 464.4875 464.5125 464.5375 464.5625 466.0375 466.0625 466.0875 466.1125 466.1375 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 Frequency and Code Charts UHF Frequencies 21 operation.fm Page 22 Tuesday, August 30, 2005 1:16 PM Frequency and Code Charts UHF Frequencies (Continued) 22 Frequency (MHz) Bandwidth Frequency (MHz) Bandwidth 39 40 41 42 43 44 45 46 47 466.1625 466.1875 466.2125 466.2375 466.2625 466.2875 466.3125 466.3375 466.3625 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 48 49 50 51 52 53 54 55 56 467.7875 467.8375 467.8625 467.8875 467.9125 469.4875 469.5125 469.5375 469.5625 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 operation.fm Page 23 Tuesday, August 30, 2005 1:16 PM Code Hz Code Hz Code Hz 10 11 12 13 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 14 15 16 17 18 19 20 21 22 23 24 25 26 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 162.2 27 28 29 30 31 32 33 34 35 36 37 38 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3 Frequency and Code Charts Interference Eliminator Codes 23 operation.fm Page 24 Tuesday, August 30, 2005 1:16 PM Frequency and Code Charts Digital Interference Eliminator Codes 24 Code Hz Code Hz Code Hz 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 023 025 026 031 032 043 047 051 054 065 071 072 073 074 114 115 116 125 131 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 132 134 143 152 155 156 162 165 172 174 205 223 226 243 244 245 251 261 263 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 265 271 306 311 315 331 343 346 351 364 365 371 411 412 413 423 431 432 445 operation.fm Page 25 Tuesday, August 30, 2005 1:16 PM Code Hz Code Hz Code Hz 96 97 98 99 100 101 102 103 104 464 465 466 503 506 516 532 546 565 105 106 107 108 109 110 111 112 113 606 612 624 627 631 632 654 662 664 114 115 116 117 118 119 120 121 703 712 723 731 732 734 743 754 Frequency and Code Charts Digital Interference Eliminator Codes (Continued) 25 operation.fm Page 26 Tuesday, August 30, 2005 1:16 PM Troubleshooting Troubleshooting Symptom Try This: No Power Reposition, recharge or replace NiMH battery pack. Message not transmitting Make sure the Push to Talk button is completely pressed while transmitting. Reposition, recharge, replace the NiMH battery pack. Message not received Confirm that all radios have the same channel, frequency, and interference eliminator code settings. Make sure that the Push to Talk button is not inadvertently being pressed. Reposition, recharge, or replace the NiMH battery pack. Obstructions and operating indoors or in vehicles may interfere change location. Hearing conversation or Check that the Interference Eliminator Code setting is not set to noise on a 0. A shared channel may be in use, try another. channel 26 Symptom Try This: Limited talk range Steel and/or concrete structures, heavy foliage, buildings, or vehicles decrease range. Check for a clear line of sight to improve transmission. Wearing the radio close to the body such as in a pocket or on a belt decreases range. Change location of the radio. Heavy static or interference Radios are too close to one another. They must be at least 5 feet apart. Obstacles are interfering with transmission. Keypad locked Make sure menu us unlocked. Unlock by holding 3 seconds. Low batteries Recharge or replace NiMH battery pack. Extreme operating temperatures affect battery life. Charger light does not come on Check that radio/battery is properly inserted and check battery/ charger contacts to be sure they are clean. Verify that the charging pin is inserted correctly. MENU for Troubleshooting operation.fm Page 27 Tuesday, August 30, 2005 1:16 PM 27 Troubleshooting operation.fm Page 28 Tuesday, August 30, 2005 1:16 PM 28 warranty.fm Page 29 Tuesday, August 30, 2005 12:56 PM Limited Warranty MOTOROLA COMMUNICATIONS PRODUCTS Purchased in the United States and Canada Warranty • • • II. What This Warranty Covers Products. Defects in materials and workmanship in wireless cellular telephones, pagers, and/or two-way radios, and certain accessories that are sold with them, such as the battery, battery charger, and holster manufactured and/or sold by MOTOROLA. Batteries. Defects in materials and workmanship in batteries that are manufactured by MOTOROLA and/or sold with Products are covered by this warranty only if the fully-charged capacity falls below 80% of rated capacity or they leak. Software. Physical defects in the media that tangibly embodies each copy of any software supplied with the Products. Limited Warranty I. What the Period of Coverage Is From the date the Products are purchased by the first end-user: • Products. The warranty is for one year. • Software. The warranty is for 90 days. 29 warranty.fm Page 30 Tuesday, August 30, 2005 12:56 PM • Repairs/Replacements. The warranty is for the balance of the original warranty or for 90 days from the date you receive it, whichever is longer. III. Who is Covered This warranty extends to the first end-user purchaser only. Limited Warranty IV. What We Will Do to Correct Warranty Problems At no charge to you, we have the option to repair or replace the Products or software that do not conform to the warranty, or to refund the Products’ purchase price. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products or parts. No software updates are provided. V. How to Obtain Warranty Service or Other Information USA Two-Way Radios 1-800-448-6686 Canada All Products 1-800-461-4575 TTY TTY 1-888-390-6456 For Accessories and Software, please call the telephone number designated above. 30 You will receive instructions on how to ship the Products to MOTOROLA. You must ship the Products to us with freight, duties and insurance prepaid. Along with the Products you must include: (a) a copy of your receipt, bill of sale or other comparable warranty.fm Page 31 Tuesday, August 30, 2005 12:56 PM We will ship repaired or replacement Products at our expense for the freight and insurance, but at your expense for any duties. If additional information is needed, please contact us at the telephone number listed on page 30. VI. What This Warranty Does Not Cover • • • Products that are operated in combination with ancillary or peripheral equipment or software not furnished by MOTOROLA for use with the Products (“ancillary equipment”), or any damage to the Products or ancillary equipment as a result of such use. Among other things, “ancillary equipment” includes batteries, chargers, adaptors, and power supplies not manufactured or supplied by MOTOROLA. Any of these voids the warranty. Someone other than MOTOROLA (or its authorized service centers) tests, adjusts, installs, maintains, alters, modifies, or services the Products in any way. Any of these voids the warranty. Rechargeable batteries that: (a) are charged by other than the MOTOROLA approved battery charger specified for charging such batteries; (b) have any broken seals or show evidence of tampering; (c) are used in equipment other Limited Warranty proof of purchase; (b) a written description of the problem; (c) the name of your service provider (if this Product requires subscription service); (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number. If requested, you must also return all detachable parts such as antennas, batteries and chargers. RETAIN YOUR ORIGINAL PROOF OF PURCHASE. 31 warranty.fm Page 32 Tuesday, August 30, 2005 12:56 PM Limited Warranty • • • • • • than the Product for which they are specified; or (d) are charged and stored at temperatures greater than 60 degrees centigrade. Any of these voids the warranty. Products that have: (a) serial numbers or date tags that have been removed, altered, or obliterated; (b) board serial numbers that do not match each other, or board serial numbers that do not match the housing; or (c) nonconforming or non-MOTOROLA housings or parts. Any of these voids the warranty. Defects or damage that result from: (a) use of the Products in a manner that is not normal or customary; (b) improper operation or misuse; (c) accident or neglect such as dropping the Products onto hard surfaces; (d) contact with water, rain, extreme humidity, or heavy perspiration; (e) contact with sand, dirt or the like; or (f) contact with extreme heat, or spills of food or liquid. Physical damage to the surface of the Products, including scratches, cracks, or other damage to a display screen, lens, or other externally exposed parts. Failure of Products that is due primarily to any communication service or signal you may subscribe to or use with the Products. Coil cords that are stretched or that have any broken modular tabs. Products that are leased. Flat-rate repair rates may apply to Products not covered by this warranty. To obtain information about Products needing repairs that are not covered by this warranty, 32 warranty.fm Page 33 Tuesday, August 30, 2005 12:56 PM please call the telephone number previously listed. We will provide information on repair availability, rates, methods of payment, where to send the Products, etc. This is MOTOROLA’s complete warranty for the Products, and states your exclusive remedies. This warranty is given in lieu of all other express warranties. Implied warranties, including without limitation, the implied warranties of merchantability and fitness for a particular purpose, are given only if specifically required by applicable law. Otherwise, they are specifically excluded. No warranty is made as to coverage, availability, or grade of service provided by the Products, whether through a service provider or otherwise. No warranty is made that the software will meet your requirements or will work in combination with any hardware or applications software products provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. Limited Warranty VII. Some Other Limitations In no event shall MOTOROLA be liable, whether in contract or tort (including negligence) for damages in excess of the purchase price of the Product, or for any indirect, incidental, special or consequential damages of any kind, or loss of revenue or profits, loss of business, loss of information or data, or other financial loss arising out of or in connection with the ability or inability to use the Products, to the full extent these damages may be disclaimed by law. 33 warranty.fm Page 34 Tuesday, August 30, 2005 12:56 PM VIII. Patent and Software Provisions At MOTOROLA’s expense, we will defend you, and pay costs and damages that may be finally awarded against you, to the extent that a lawsuit is based on a claim that the Products directly infringe a United States patent. Our obligation is conditioned on: Limited Warranty A. you notifying us promptly in writing when you receive notice of the claim; B. you giving us sole control of the defense of the suit and all negotiations for its settlement or compromise; and C. should the Products become, or in Motorola's opinion be likely to become, the subject of a claim of infringement of a United States patent, you permit us, at our option and expense, either to: procure for you the right to continue using the Products; replace or modify them so that they become non-infringing; or grant you a credit for such Products, as depreciated, and accept their return. The depreciation will be an equal amount per year over the lifetime of the Products, as established by MOTOROLA. MOTOROLA will have no liability to you with respect to any claim of patent infringement that is based upon the combination of the Products or parts furnished under this limited warranty with ancillary equipment, as defined in VI. This is MOTOROLA’s entire liability with respect to infringement of patents by the Products. 34 warranty.fm Page 35 Tuesday, August 30, 2005 12:56 PM Some states and other jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction. Limited Warranty Laws in the United States and other countries preserve for MOTOROLA and other third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to reproduce in copies and distribute copies of such software. The software may be copied into, used in and redistributed with only those Products that are associated with such software. No other use, including without limitation, disassembly or reverse engineering of such software or exercise of exclusive rights in such software is permitted. 35 Limited Warranty warranty.fm Page 36 Tuesday, August 30, 2005 12:56 PM 36 6864110w15oTOC.fm Page 2 Wednesday, August 17, 2005 11:20 AM MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005. *6880309S90* 6880309S90-O
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Mode : UseOutlines XMP Toolkit : 3.1-701 About : uuid:bab32c04-6602-4596-9ca6-8e8c5f59f189 Producer : Acrobat Distiller 6.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2005:09:12 10:59:07-04:00 Create Date : 2005:08:16 13:21:36-05:00 Metadata Date : 2005:09:12 10:59:07-04:00 Document ID : uuid:3bf5011a-e0ae-4fee-8bb6-1832390fe988 Instance ID : uuid:f716dbf2-037a-451c-843a-f39ef0324c8f Format : application/pdf Title : cover.eps Creator : ckc015 Has XFA : No Page Count : 40 Page Layout : SinglePage Author : ckc015EXIF Metadata provided by EXIF.tools