Motorola Solutions 89FT4834 Hand-held Transmitter User Manual WarisPopUser

Motorola Solutions, Inc. Hand-held Transmitter WarisPopUser

Users Manual

1Copyright InformationThe Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other mediums. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs con-tained in the Motorola products described in this instruction manual may not be copied or reproduced in any man-ner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, pat-ents, or patent applications of Motorola, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product.© 1998 by Motorola, Inc.All Rights Reserved.Motorola Malaysia Sdn. Bhd. (Company No. 12631DE),Bayan Lepas Free Industrial Zone, Phase 3,11900 Penang, Malaysia.Printed in Malaysia., Motorola, Call Alert and MDC are trademarks of Motorola, Inc.
GP328 Quick Reference CardDeleting a Nuisance Channel1. While radio is on a Nuisance Channel, press and hold Scan button until a tone is sounded.2. Release Scan button.For Keypad Radios onlyMaking a Phone Call1. Press Phone button.2. Send access code if needed.3. Send phone number by• pressing and releasing PTT to send last dialed num-ber, or• press Speed Dial button followed by keypad keys ‘1’ to ‘9’ to access first nine numbers in your phone list (press PTT if buffered dial), or• press the numbered keys to send out phone number (press PTT if buffered dial).Ending a Phone Call1. Send de-access code if needed.2. Press Phone button.LED IndicatorMicrophoneChannel Selector KnobOn/Off/Volume Knob1SP:LP:2SP:LP:3SP:LP:4SP:LP:5SP:LP:6SP:LP:7SP:LP:NOTE: • Enter the functions for your radio’s 7 program-mable buttons in the boxes provided above.• In the boxes above, SP represents Short Press, while LP represent Long Press.
2. Adjust volume level.3. Switch to desired channel.4. If at any time a call comes through, it will be heard at the volume level set.Emergency Siren1. Press programmed Emergency button to initiate Emergency Siren.2. Press and hold Emergency button to cancel Emer-gency Siren.3. Press and release Emergency button to restart Emergency sequence.Programmable Buttons’ Audio IndicatorsProgrammable Buttons Positive Indicator Tone Negative Indicator ToneScan Start Scan oper-ation Stop Scan oper-ationTx Power Radio transmits at low power Radio transmits at high powerSquelch Radio operates in tight squelch Radio operates in normal squelchOption Board Activates radio’s option boardDeactivates radio’s option boardKeypad Lock Radio’s keypad is locked Radio’s keypad is unlockedRepeater/TalkaroundRadio DOES NOT use the repeaterRadio uses the repeaterTurning On the Radio• Turn On-Off/Volume Control knob clockwise. Self Test Pass Tone will sound and green LED will light up if radio powers up successfully. If radio fails power up, the Self Test Fail Tone will sound.Turning Off the Radio• Turn On-Off/Volume Control knob counter-clockwise, until click is heard.Adjusting the Radio’s Volume1. Press and hold Volume Set key; until continuous tone is sounded.2. Turn On-Off/Volume Control knob to adjust volume level.3. Release Volume Set key when desired level is achieved.Selecting a Radio Channel• Turn Channel Selector knob clockwise or counter-clockwise to reach desired channel.Sending a Call1. Use Channel Selector knob to change to required channel.2. Press PTT, and speak clearly with mouth about 2.5 to 5 cm (one to two inches) away from microphone.3. Release PTT when call is completed.Receiving a Call1. Turn radio on.
iEnglishLIMITED WARRANTY & LIABILITYMOTOROLA COMMUNICATION PRODUCTSI. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:MOTOROLA ELECTRONICS PTE LTD ("MOTOROLA") warrants the MOTOROLA manufactured TWO-WAY RADIO Products listed below ("Product") against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:TWO-WAY RADIO Mobile and Portable Units Two (2) YearsProduct Accessories (including battery, antenna, charger, belt clip etc.)  One (1) YearMotorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.II. GENERAL PROVISIONS:This warranty sets forth the full extent of MOTOROLA'S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLA'S option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. HOW TO GET WARRANTY SERVICE:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty
iiEnglishservice. You can also call Motorola Service centres at 65-4867167 (Singapore), 8610-6843722(China), 822-3440-7400(Korea), 9180-6657676/7/8/9(India), 613-9213-7809(Australia), 649-579-2378(New Zealand), or Asia Pacific Help Desk 65-485-5333(Singapore).IV. WHAT THIS WARRANTY DOES NOT COVER:A) Defects or damage resulting from use of the Product in other than its normal and customary manner.B) Defects or damage from misuse, accident, water, or neglect.C) Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.D) Breakage or damage to antennas unless caused directly by defects in material workmanship.E) A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motor-ola's normal warranty inspection and testing of the Product to verify any warranty claim.F) Product which has had the serial number removed or made illegible.G) Rechargeable batteries if:1) any of the seals on the battery enclosure of cells are broken or show evidence of tampering.2) the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.H) Freight costs to the repair depot.I) A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accor-dance with MOTOROLA’S published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.J) Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product.K) Normal and customary wear and tear.V. PATENT AND SOFTWARE PROVISIONS:MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.
CONTENTSiiiContentsEnglishCONTENTSRadio Overview  . . . . . . . . . . . . . . . . . . . .  1Parts of the Radio. . . . . . . . . . . . . . . . . . . . . . . . 1On/Off/Volume Knob  . . . . . . . . . . . . . . . . . 2Channel Selector Knob. . . . . . . . . . . . . . . . . 2Push-to-Talk (PTT) Button  . . . . . . . . . . . . . 2Microphone  . . . . . . . . . . . . . . . . . . . . . . . . . 2LED Indicator. . . . . . . . . . . . . . . . . . . . . . . . 2Keypad Keys (for keypad radios only)  . . . . 2Programmable Buttons. . . . . . . . . . . . . . . . . 2Indicator Tones  . . . . . . . . . . . . . . . . . . . . . . . . . 5Programmable Buttons’ Audio Indicators . . . . . 5Improved Audio Features  . . . . . . . . . . . . . . . . . 6Low Level Expansion (LLE) . . . . . . . . . . . . 6Companding . . . . . . . . . . . . . . . . . . . . . . . . . 6Getting Started . . . . . . . . . . . . . . . . . . . . .  7Battery Information . . . . . . . . . . . . . . . . . . . . . . 7Battery Status . . . . . . . . . . . . . . . . . . . . . . . . 7Charging your Battery . . . . . . . . . . . . . . . . . 7Accessory Information. . . . . . . . . . . . . . . . . . . . 8Attaching the Battery . . . . . . . . . . . . . . . . . . 8Removing the Battery  . . . . . . . . . . . . . . . . . 8Attaching the Antenna . . . . . . . . . . . . . . . . . 9Removing the Antenna . . . . . . . . . . . . . . . . .9Attaching the Belt Clip . . . . . . . . . . . . . . . . 10Removing the Belt Clip  . . . . . . . . . . . . . . .10Turning the Radio On or Off . . . . . . . . . . . . . . 11Adjusting the Radio’s Volume . . . . . . . . . . . . . 11Selecting a Radio Channel . . . . . . . . . . . . . . . . 11Sending a Call. . . . . . . . . . . . . . . . . . . . . . . . . . 11Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . 12Radio Call Information  . . . . . . . . . . . . . .13Emergency Siren. . . . . . . . . . . . . . . . . . . . . . . . 13Talkaround . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Squelch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Power Level . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Starting or Stopping a Scan Operation . . . . . . . 15Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Deleting a Nuisance Channel . . . . . . . . . . . . . . 15Adding a Deleted Nuisance Channel back to the Scan List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Scan Channel Discovery Alert . . . . . . . . . . . . . 16Scan List Member Priority . . . . . . . . . . . . . . . . 16Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
CONTENTSContentsivEnglishMaking a Phone Call . . . . . . . . . . . . . . . . . . . . 20Entering the Phone Mode. . . . . . . . . . . . . . 20Sending the Access Code. . . . . . . . . . . . . . 20Sending the Phone Number . . . . . . . . . . . . 20The Phone Conversation  . . . . . . . . . . . . . . 22Ending the Phone Call . . . . . . . . . . . . . . . . 22Safety Information . . . . . . . . . . . . . . . . .  23Safe And Efficient Operation Of Motorola Two-Way Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Exposure To Radio Frequency Energy  . . . 23Portable Radio Operationand EME Exposure  . . . . . . . . . . . . . . . . . . 24ElectromagneticInterference/Compatibility . . . . . . . . . . . . . 24Operational Warnings  . . . . . . . . . . . . . . . . 24Operational Cautions . . . . . . . . . . . . . . . . . 25Recycling / Disposal of NiCd Batteries. . . . . . 26
RADIO OVERVIEW1Radio OverviewEnglishRADIO OVERVIEWPARTS OF THE RADIOOn/Off/VolumeKnobChannel SelectorKnobMicrophoneKeypad(programmable)(programmable)Top Button(programmable)Side Button 1Push-to-Talk(PTT) Button Front ButtonsLED Indicator(programmable)Side Button 2(programmable)Side Button 3Dust Covercovering theAccessoriesPot
RADIO OVERVIEWRadio Overview2EnglishOn/Off/Volume KnobUsed to turn the radio on or off, and to adjust the radio’s volume.Channel Selector KnobUsed to switch the radio to different channels.Push-to-Talk (PTT) ButtonPress and hold down this button to talk, release it to listen.MicrophoneSpeak clearly into the microphone when sending a message.LED IndicatorUsed to give battery status, power-up status, radio call information and scan status.Keypad Keys (for keypad radios only)These keys are used when dialing a phone number.Programmable ButtonsSeveral of the radio’s buttons can be programmed as short-cut buttons for many of the radio’s features. Programmable buttons are the:• Top button,• three side buttons, and• three front buttons (for keypad radios).Check with your dealer for a complete list of the functions your radio’s programmable buttons support.The following table shows the functions available by• quickly pressing and releasing the program-mable buttons (short press), or by• pressing and holding the programmable but-tons for a period of time (at least 1.5 sec-onds) before releasing (long press), or by• pressing and holding down the programma-ble buttons while checking the status or mak-ing adjustments.123456789*0#, / .
RADIO OVERVIEW3Radio OverviewEnglishButton Short Press Long Press Press and HoldEmergency*To initiate an Emergency Siren. To cancel your radio’s Emergency status. —Monitor/Per-manent Moni-tor—To continually monitor the selected channel.To monitor the selected channel for any activity.Volume Set — —To sound a tone for adjusting the radio’s vol-ume level.Battery Gauge — — To check the battery’s status.Scan/Nui-sance Chan-nel DeleteTo toggle between the start/stop of the Scan operation.To delete a nuisance channel while scanning. —Tx PowerTo toggle your radio’s transmit power level between High and Low power.†To toggle your radio’s transmit power level between High and Low power.†—Keypad Lock — To toggle between locking/unlock-ing your radio’s keypad. —Repeater/TalkaroundTo choose to/not to transmit through the repeater.†To choose to/not to transmit through the repeater.†—Squelch To toggle your radio’s squelch level between tight/normal squelch.†To toggle your radio’s squelch level between tight/normal squelch.†—
RADIO OVERVIEWRadio Overview4EnglishOption BoardTo toggle the activation/deactiva-tion of your radio’s option board (if one is installed).†To toggle the activation/deactiva-tion of your radio’s option board (if one is installed).†—Phone To make a Phone Call.†To make a Phone Call.†—Speed Dial To easily access the phone num-bers in your phone list.†To easily access the phone num-bers in your phone list.†—Light To turn on your radio’s backlight.†To turn on your radio’s backlight.†—* If Emergency function is required, it can ONLY be programmed to the Top Button.† Depending on how your radio has been programmed by your dealer, these functions are activated EITHER through short press OR long press, but not both.Button Short Press Long Press Press and Hold
RADIO OVERVIEW5Radio OverviewEnglishINDICATOR TONESHigh pitched tone   Low pitched tone PROGRAMMABLE BUTTONS’ AUDIO INDICATORSSome programmable keys function as toggles (alternating between two different choices). These keys use audio indicators to indicate the change.Self Test Pass ToneSelf Test Fail TonePositive Indicator ToneNegative Indicator ToneProgrammable ButtonsPositive Indicator ToneNegative Indicator ToneScan Start Scan operation Stop Scan operationTx PowerRadio trans-mits at low powerRadio trans-mits at high powerSquelchRadio oper-ates in tight squelchRadio oper-ates in normal squelchOption Board Activates radio’s option boardDeactivates radio’s option boardKeypad Lock Radio’s key-pad is lockedRadio’s key-pad is unlockedRepeater/TalkaroundRadio DOES NOT use the repeaterRadio uses the repeater
RADIO OVERVIEWRadio Overview6EnglishIMPROVED AUDIO FEATURESLow Level Expansion (LLE)The LLE feature of your radio improves voice quality by reducing unwanted background noise when receiving a message. It is compatible with most major types of audio processing systems available today.CompandingCompanding is a feature that allows further improvement of voice quality. It compresses your voice at transmission, and expands it when receiving while simultaneously reducing extraneous noise. However, to enjoy this benefit, ALL transmitting and receiving radios must have this feature activated.NOTE: Contact your dealer for your radio’s currentcompanding settings or to change the settings.
GETTING STARTED7Getting StartedEnglishGETTING STARTEDBATTERY INFORMATIONBattery StatusYou can check your radio’s battery status by pressing the programmed Battery Gauge button (battery status is shown by the LED indicator).NOTE: If the Battery Gauge indicator does NOTappear, this indicates that the battery may not bea genuine Motorola product.Charging your BatteryWhen the battery level is very low, you need to recharge the battery before you can continue to use your radio.1. Place the radio with the battery attached or the battery alone in the charger.2. The charger’s LED would indicate the charging progress.NOTE: Because new batteries or batteries thathave not been used for several months couldprematurely indicate full charge (solid greenLED), charge the batteries for 14 to 16 hoursprior to initial use to achieve optimal perfor-mance.Battery Level LED IndicatorHigh GreenSatisfactory YellowLow Flashing RedVery Low NoneLED color StatusSingle flash of Green Successful charger power-up.Flashing Red* Battery is unchargeable.Flashing Yellow Charger is getting ready to charge.Red Battery is charging.Flashing Green†Battery is 90% charged.Green Battery is fully charged.* Remove the battery from charger and use a pencil eraser to clean the four metal contacts on the bottom of the battery. Place the battery back into the charger. If the LED indicator continues to flash red, replace the battery.† A standard battery may require one hour to charge to 90% capacity.
GETTING STARTEDGetting Started8EnglishACCESSORY INFORMATIONAttaching the Battery1. Fit the extensions at the bottom of the battery into the slots at the bottom of the radio’s body.2. Press the top part of the battery towards the radio until a click is heard.Removing the Battery1. Turn off the radio, if it is turned on.2. Slide the battery latches, on both sides of the battery, downwards.3. Pull the top part of the battery away from the radio’s body, and lift the battery from the radio’s body.slots12battery latches12
GETTING STARTED9Getting StartedEnglishAttaching the Antenna1. Align the threaded end of the antenna with the radio’s antenna connector.2. Turn the antenna clockwise to fasten it.Removing the AntennaTurn the antenna counter-clockwise until you can remove it.attachingremoving
GETTING STARTEDGetting Started10EnglishAttaching the Belt Clip1. Align the grooves of the belt clip with those of the battery.2. Press the belt clip downwards until a click is heard.Removing the Belt Clip1. Use a key to press the belt clip tab away from the battery.2. Slide the belt clip upwards to remove it. belt clip tab12
GETTING STARTED11Getting StartedEnglishTURNING THE RADIO ON OR OFF• Turn the On-Off/Volume Control knob clockwise to turn on the radio. You will hear the Self Test Pass Tone and see a green LED if the radio powers up successfully. If the radio fails its self test, you will hear the Self Test Fail Tone.• Turn the On-Off/Volume Control knob counter-clockwise, until a click is heard, to turn off the radio.ADJUSTING THE RADIO’S VOLUME1. Press and hold the Volume Set key; you will hear a continuous tone.2. Turn the On-Off/Volume Control knob and adjust the volume level.3. Release the Volume Set key.SELECTING A RADIO CHANNELYour radio offers sixteen (16) channels for easy access to required conventional channels. Some channels on your radio may not be programmed. Check with your dealer for more information.Turn the Channel Selector knob clockwise or counter-clockwise until you reach the desired channel.SENDING A CALL1. Use the Channel Selector knob to change to the required channel.2. Press the PTT, and speak clearly with your mouth about 2.5 to 5 cm (one to two inches) away from the microphone.3. Release the PTT when you finish speaking.ON OFF
GETTING STARTEDGetting Started12EnglishRECEIVING A CALL1. Turn your radio on.2. Adjust its volume level.3. Switch to the desired channel.4. If at any time a call comes through, you will hear the call at the volume level you have set.
RADIO CALL INFORMATION13Radio Call InformationEnglishRADIO CALL INFORMATIONEMERGENCY SIRENYour radio can be programmed to emit an emergency siren. The Emergency Siren will cause the radio to sound a repetitive tone at the maximum volume.1. Press and release the Emergency button to ini-tiate an Emergency Siren.2. Press and hold the Emergency button to can-cel the Emergency Siren.3. Press and release the Emergency button to restart the Emergency sequence.TALKAROUNDIn your communications network, you may be using a repeater to cover a larger area than what is possible with your radio. However, you can communicate with another radio within your radio’s range without going through the repeater by using the Talkaround feature. This is especially useful when the repeater is down. Press the programmed Repeater/Talkaround button to toggle between the options of making or not making a call through the repeater. A positive indicator tone indicates that the radio is in talkaround mode, while a negative indicator tone indicates that the radio is in repeater mode.SQUELCHIf a particular channel receives many unwanted calls coming from radios that do not belong to your communications group and are some distance away, or the “background noise” is excessive, you can try to filter these transmissions out by tightening the channel’s squelch. However, tightening squelch could cause calls from members of your communications group that are farther away to be filtered out as well. To set the squelch level:Press the programmed Squelch button to toggle between the options of having normal squelch or tightening the squelch of your radio. A positive indicator tone indicates that the radio is operating in tight squelch, while a negative indicator tone indicates that the radio is operating in normal squelch.
RADIO CALL INFORMATIONRadio Call Information14EnglishPOWER LEVELYou can transmit your calls at different transmit power levels. A higher level means you can reach a radio that is farther away. Lower power level conserves battery power. You are advised to transmit as frequently as possible on low power, and use high power only when needed.Press the programmed Tx Power button to toggle between the options for High or Low power transmit level. A positive indicator tone indicates that the radio is operating in low power mode, while a negative indicator tone indicates that the radio is operating in high power mode.
SCAN15ScanEnglishSCANYou can monitor several channels in order to receive any call that is transmitted on any of these channels. Sixteen different channels can be programmed into a scan list. Each channel can share the same scan list or have different scan lists assigned to them.Once the radio’s scan operation is activated and the radio detects a call coming through a channel in its scan list, it switches to that channel for you to receive the call.STARTING OR STOPPING A SCAN OPERATIONThe LED Indicator will blink (green) during a scan operation. It will stop blinking when the radio switches to a channel.TALKBACKIf the programmable Talkback option is set, you can respond to any calls received during the scan operation by pressing the PTT before the programmed hang-time ends. Check with your dealer for details.DELETING A NUISANCE CHANNELIf a channel continually generates unwanted calls/noise, you can temporarily remove it from the scan list by performing a Nuisance Channel Delete operation.NOTE: You cannot perform a Nuisance ChannelDelete on a priority channel or if there is onlyone remaining channel in the scan list.ADDING A DELETED NUISANCE CHANNEL BACK TO THE SCAN LIST1. Press the Scan key to start a scan operation.2. Press the Scan key again to stop the scan operation.1. While the radio is on the Nuisance Channel, press and hold the Scan key until you hear a tone.2. Release the Scan key.1. Press the Scan key to stop the scan opera-tion.2. Press the Scan key again to re-start the scan operation.
SCANScan16EnglishSCAN CHANNEL DISCOVERY ALERTSometimes you need to know which channel the radio has switched to during a scan operation. The Scan Channel Discovery Alert gives you this information.After you have stopped a scan operation, this feature gives you audio feedback when you select the last channel that was switched to by the scan operation. To do this:SCAN LIST MEMBER PRIORITYA channel in your scan list may be prioritized (check with your dealer for details). In such a case, the radio will check that prioritized channel more frequently than the other non-prioritized channels.Assuming a scan list with 6 channels, if all your channels are non-prioritized, the normal scan operation would check for activity in the following sequence:If Channel 2 is prioritized, the scan operation would change toNOTE: Even though your radio has switched to anon-priority channel, your radio will still check foractivity on the priority channel. If some activity isdetected there, the radio will switch to that prior-ity channel.1. Stop the scan operation.2. Turn the Channel Selector to change the channels.3. When you reach the last channel the scan operation switched to, the radio sounds an alert tone.Ch.1Ch.3Ch.4Ch.5Ch.2Ch.6Ch.2Ch.4Ch.2Ch.2Ch.2Ch.5Ch.1Ch.6Ch.3Ch.2
SCAN17ScanEnglish
SCANScan18English
SCAN19ScanEnglish
PHONEPhone20EnglishPHONEYou can use your radio to connect to a phone line to make a phone call. You need a radio with a keypad to do this.To do this, your radio must send an access code to a station that connects it to a phone line. After you have finished your call, the radio has to send a deaccess code to shutdown the connection to the phone line. MAKING A PHONE CALLA complete phone session consists of• entering the Phone mode• sending the access code• sending the phone number• having the phone conversation• ending the phone call.Entering the Phone ModeBefore you can make a phone call, you must enter the radio’s Phone mode.1. Press the Phone button.Sending the Access CodeYour radio can be programmed to send the access code in any of the following ways:• manual• automatic delayed• automatic immediate.Check with your dealer for more details.Sending the Phone NumberAfter the access code is sent, you should wait for a dialing tone before sending your phone number.You can send•a phone number that is stored in the radio, or•a new number.Method Steps to TakeManual Dial the access code from the keypad.Automatic DelayedPress and release the PTT; the radio automatically sends the prepro-grammed access code.Automatic ImmediateYou do not have to do anything; the radio immediately sends the access code when it enters phone mode.
PHONE21PhoneEnglishAdditionally, depending on how your radio is programmed, if you use the keypad to send a number, the radio can send the numbers in one of the following ways:• live dial• buffered dial.Check with your dealer for details.Sending a Stored Phone NumberYou can access the stored phone numbers by• recalling the last number dialed,• using the speed dial feature.Method Steps to TakeLast Num-ber Redial*Press and release the PTT; the radio sends the last number dialed.Speed Dial‡1. Press and release the pro-grammed Speed Dial button.2. Press the numbered keys(1-9) corresponding to the first nine phone numbers in the phone list. Press “0” if you want the last number dialed.3. If your radio uses buffered dial, press and release the PTT.4. The radio sends out the phone number.* The method described is not applicable for radios which manually send the access code; these radios can access this number from the phone list or the speed dial.Method Steps to Take
PHONEPhone22EnglishSending a New Number (for radios with keypad only)You enter the phone number by pressing the relevant keys on the keypad.The Phone ConversationOnce the radio has connected to the intended party, you can begin the conversation. Even though this is a phone call, your conversation mimics a radio call (that is, both parties speak in turn).NOTE: The radio starts a programmable Time-Out-Timer the moment both parties stop transmitting(talking). If the Time-Out-Timer expires, the radiowill end the phone call.Ending the Phone CallJust as the radio needs to send the access code when starting a phone call, the radio needs to send the deaccess code to end the phone call.The radio can send the deaccess code in any of the following ways:• manual, and• automatic.Check with your dealer for details.Method Steps to TakeLive DialEnter the phone number by using the keypad; the radio sends out the numbers as the keys are pressed.Buffered Dial1. Enter the phone number by using the keypad; the radio saves the selected numbers in a buffer.2. Press and release the PTT; the radio sends out the numbers in its buffer.1. Press and hold the PTT, while talking into the microphone.2. Release the PTT when you finish what you want to say, and wait for the response.3. Repeat steps 1 and 2 until the conversation ends.1. If your radio sends the deaccess code manu-ally, dial the deaccess code from the keypad.2. Press the Phone button to exit phone mode.NOTE: Radios using the automatic methodwill send the deaccess code automati-cally.
SAFETY INFORMATION23Safety InformationEnglishSAFETY INFORMATIONSAFE AND EFFICIENT OPERATION OF MOTOROLA TWO-WAY RADIOSThis document provides information and instructions for the safe and efficient operation of Motorola Portable Two-Way Radios.For information regarding radio use in hazardous areas, please refer to the Factory Mutual (FM) approval manual supplement or Instruction Card which is included with radio models that offer this capability.Exposure To Radio Frequency EnergyYour Motorola Two-Way Radio, which generates and radiates radio frequency (RF) electromagnetic energy (EME) is designed to comply with the following National and International Standards and Guidelines regarding exposure of human beings to radio frequency electromagnetic energy:• Federal Communications Commission Report and Order No. FCC 96-326 (August 1996)• American National Standards Institute (C95.1 - 1992)• National Council on Radiation Protection and Measurements (NCRP-1986)• International Commission on Non-Ioniz-ing Radiation Protection (ICNRP- 1986)•European Committee for Electrotechnical Standardisation (CENELEC):To assure optimal radio performance and to ensure that your exposure to radio frequency electromagnetic energy is within the guidelines in the above standards, always adhere to the following procedures:ENV 50166-1 1995 E Human exposure to electro-magnetic fields Low fre-quency (0 Hz to 10 kHz) ENV 50166-2 1995 E Human exposure to electro-magnetic fields High fre-quency (10 kHz to 300 GHz)Proceedings of SC211/B 1996 “Safety Considerations for Human Exposure to EMFs from Mobile Telecommunica-tion Equipment (MTE) in the Frequency Range 30MHz - 6 GHz.”(EMF - Electro-Mag-netic Fields)
SAFETY INFORMATIONSafety Information24EnglishPortable Radio Operationand EME Exposure•When transmitting with a portable radio, hold radio in a vertical position with the microphone 2.5 to 5 centi-meters (one or two inches) away from the mouth. Keep antenna at least 2.5 centimeters (one inch) from your head or body when transmitting. • If you wear a portable Two-Way radio on your body, ensure that the antenna is at least 2.5 centimeters (one inch) from the body when transmitting.ElectromagneticInterference/CompatibilityNote: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inad-equately shielded, designed or otherwise configured for electromagnetic compatibility.• To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospital or health facilities may be using equipment that is sensitive to external RF energy.• When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with air-line regulations or crew instructions.Operational WarningsVehicles with an air bag• Do not place a portable radio in the area over an airbag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause seri-ous injury to occupants of vehicle.MAN WITH RADIO!W A R N I N G!
SAFETY INFORMATION25Safety InformationEnglishPotentially explosive atmospheres• Turn off your Two-Way radio when you are in any area with a potentially explo-sive atmosphere, unless it is a radio type especially qualified for use in such areas (e.g. FM or Cenelec approved). Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.Batteries• Do not replace or recharge batteries in a potentially explosive atmosphere. Con-tact sparking may occur while installing or removing batteries and cause an explo-sion.Blasting caps and areas• To avoid possible interference with blast-ing operations, turn off your radio when you are near electrical blasting caps. In a “blasting area” or in areas posted “turn off two-way radio”, obey all signs and instructions.Note: The areas with potentially explosive atmo-spheres referred to above include fuelling areas such as: below decks on boats; fuel or chemical transfer or storage facilities; areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted.Operational CautionsDamaged antennas• Do not use any portable two-way radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result.Batteries• All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewellery, keys or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short cir-cuit) and become quite hot. Exercise care in handling any charged battery, particu-larly when placing it inside a pocket, purse or other container with metal objects.!C a u t i o n
SAFETY INFORMATIONSafety Information26EnglishRECYCLING / DISPOSAL OF NICD BATTERIESThe Basel Convention classifies used NiCd bat-teries as hazardous waste, unless certainexemptions apply.At the end of your battery’s useful life, it can berecycled. However, recycling facilities may not beavailable in all areas. Under various state or locallaws, such batteries must be recycled or dis-posed of properly, and cannot be dumped inlandfills or incinerators.Motorola fully endorses and encourages therecycling of NiCd batteries. The following is a listof recycling facilities around the world, where youcan ship your NiCd batteries to be recycled:United StatesINMETCOP.O. Box 720245 Porteville RoadEllwood City, PA 16117Tel:(412) 758-5515Fax:(412) 758-9311EuropeS.N.A.M.Rue de la GarenneZ.I. Chesnes Tharabie -BP733Saint Quentin Fallavier38297 La Verpilliere Cedex,FranceTel: 033-74-94-59-85Fax: 033-74-94-13-18AsiaHanil Metal Recycle Co. Ltd.2404 Palryong-dongChangwon-ShiKyongsangnam-Do, KoreaTel: 082-551-93-1911Fax: 082-551-96-0050JapanOnahama Refinery of Toho Zinc Co., Ltd.,10 Aza-Yoshihama,Onahama,Iwaki-City Fukushima Prefecture,JapanMarubeni Co.Head Office/Attn. B6B24-2 Ohtemachi 1-ChomaCiyoda-Ku, Tokyo, JapanNippon Recycle Ctr., Corp.6-3-19, Nishitamma, Kita-KuOsaka, 530, JapanTel: 081-6-311-9071Fax: 081-311-0949You should consider the methods of collecting,labeling, and shipping used NiCd batteries. Con-sult your federal, state, or local enviromentalauthority for specific legal requirements and forrecycling options in your area.Motorola, as a responsible corporate citizen, hasalways been concerned with the protection of theenvironment. Please feel free to call our toll-freenumber,1-800-422-4210, for further battery infor-mation.

Navigation menu