Motorola Solutions 89FT4858 MULTIBAND PORTABLE 2-WAY RADIO User Manual APX 7000 Portable Dual Display User Guide
Motorola Solutions, Inc. MULTIBAND PORTABLE 2-WAY RADIO APX 7000 Portable Dual Display User Guide
Contents
- 1. Users Manual
- 2. User Manual
Users Manual
APX™ Two-Way Radios APX 6000 User Guide Model 3 m Receiving and Transmitting ASTRO® APX™ 6000 Series Digital Portable Radios Quick Reference Card Product Safety and RF Exposure Compliance 16-Position Select Knob __________ On/Off/Volume Control Knob Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF C a u t i o n Exposure booklet enclosed with your radio. Antenna 2 Listen for a transmission. Top Display ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits. Radio Controls Microphone Top Side (Select) Button __________ PTT Button Side Button 1 __________ Top (Orange) Button __________ 3-Position A/B/C Switch __________ Microphone 2-Position Concentric Switch __________ Accessory Connector Menu Select Buttons Main Display Data Feature Button Main Speaker Keypad 4-Way Navigation Button © 2010 by Motorola, Inc. All Rights Reserved. 12/10 1301 E. Algonquin Rd., Schaumburg, IL 60196-1078, U.S.A. OR Press and hold Volume Set button. OR Press Monitor button and listen for activity. 3 Adjust volume, if necessary. 4 Press the PTT button to transmit; release to receive. Sending an Emergency Alarm Bluetooth Pairing Indicator 1 Press the Emergency button. 2 The display shows Emergency and the Battery Side Button 2 __________ Radio On/Off • On – On/Off/Volume knob clockwise. • Off – On/Off/Volume knob counterclockwise. Home Button 1 Select zone/channel. current zone/channel. A short, mediumpitched tone sounds, and the LED rapidly blinks red. 3 When acknowledgment is received, you hear four beeps; alarm ends; and radio exits emergency. To exit emergency at any time, press and hold the Emergency button. Sending an Emergency Call Zones and Channels • Zone – Zone switch to desired zone. • Channel – Channel switch to desired channel. 1 Press the Emergency button. *PMLN5717A* PMLN5717A English 2 Press and hold the PTT button. Speak clearly into the microphone. 3 Release the PTT button to end call. 4 Press and hold Emergency button to exit emergency. To exit emergency at any time, press and hold the Emergency button. Sending a Silent Emergency Call 1 Press the Emergency button. 2 The display does not change; the LED does not light up, and there is no tone. 3 Silent emergency continues until you: Press and hold the Emergency button to exit emergency state. OR Press and release the PTT button to exit the Silent Emergency Alarm mode and enter regular dispatch or Emergency Call mode. The more stripes, the stronger the signal strength for the current site (trunking only). Direct radio to radio communication or connected through a repeater. On = Direct Off = Repeater is set at Low power. H . LH == Radio Radio is set at High power. i Scanning a scan list. This channel is being monitored. OR Blinking dot = Detects activity on the Priority-One Channel during scan. Steady dot = Detects activity on the Priority-Two Channel during scan. Display Status Icons Menu Navigation Receiving a call or data Transmitting a call or data Received an Individual Call. On = Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call. On = AES Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call. On = Location feature enabled, and location signal available. Off = Location feature disabled. Blinking = Location feature enabled, but location signal unavailable. On = User is currently associated with the radio. Off = User is currently not associated with the radio. Blinking = Device registration or user registration with the server failed due to an invalid username or pin. The vote scan feature is enabled. To exit emergency at any time, press and hold the Emergency button. On steady = View mode Blinking = Program mode < or > to Menu Entry. {, |, or } directly below Menu Data activity is present. Bluetooth is ready. Bluetooth is connected to the device. Entry to select. U or D to scroll through sub-list. H to exit. {, |, or } directly below Menu Blinks when the battery is low. English Entry to select. Declaration of Conformity DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 1301 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. Hereby declares that the product: Model Name: APX 6000 conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. English Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. Declaration of Conformity • Increase the separation between the equipment and receiver. ii English • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Contents What Your Dealer/System Administrator Can Tell You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Declaration of Conformity . . . . . . . . . . . . . . . . . .i Preparing Your Radio for Use . . . . . . . . . . . . . .3 Important Safety Information . . . . . . . . . . . . . .ix Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 4 Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Safety and RF Exposure Compliance . . . . .ix Attaching the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 4 Software Version . . . . . . . . . . . . . . . . . . . . . . . .ix Computer Software Copyrights . . . . . . . . . . . . x Contents This User Guide contains all the information you need to use the APX™ 6000 Series Digital Portable Radios. Encrypted Integrated Data (EID) . . . . . . . . . . . . . . . 2 SecureNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Attaching the Antenna . . . . . . . . . . . . . . . . . . . . . . . . 5 Attaching the Accessory Connector Cover . . . . . . . . 6 Using the Carry Holder . . . . . . . . . . . . . . . . . . . . . . . 6 Turning On the Radio . . . . . . . . . . . . . . . . . . . . . . . . 7 Documentation Copyrights . . . . . . . . . . . . . . . . x Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . 8 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Identifying Radio Controls . . . . . . . . . . . . . . . . .9 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Radio Parts and Controls . . . . . . . . . . . . . . . . . . . . 10 Notations Used in This Manual . . . . . . . . . . . . . . . . . 1 Programmable Features . . . . . . . . . . . . . . . . . . . . . 11 Assignable Radio Functions . . . . . . . . . . . . . . . . . 11 Assignable Settings or Utility Functions . . . . . . . . . 13 Additional Performance Enhancement . . . . . . . . . . . 2 Dynamic System Resilience (DSR) . . . . . . . . . . . . . .2 CrossTalk Prevention . . . . . . . . . . . . . . . . . . . . . . . .2 Accessing the Preprogrammed Functions . . . . . . . 13 Using the Menu Select Buttons . . . . . . . . . . . . . . . 13 Using the Navigation Buttons . . . . . . . . . . . . . . . . 14 How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . 1 iii English Home Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Data Feature Button . . . . . . . . . . . . . . . . . . . . . . . 14 4-Way Navigation Button . . . . . . . . . . . . . . . . . . . . 14 Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Keypad Characters – Uppercase Mode . . . . . . . . . 15 Keypad Characters – Lowercase Mode . . . . . . . . . 16 Keypad Characters – Numeric Mode . . . . . . . . . . . 17 Keypad Characters – Hexadecimal Mode . . . . . . . 18 Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . 19 Identifying Status Indicators . . . . . . . . . . . . . .19 Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Text Messaging Service (TMS) Icons . . . . . . . . . . 23 Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 TMS Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . 25 Call Type Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Contents LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Selecting a Radio Channel . . . . . . . . . . . . . . . . . . . 34 Receiving and Responding to a Radio Call . . . . . . 35 Receiving and Responding to a Talkgroup Call . . .36 Receiving and Responding to a Private Call (Trunking Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Receiving and Responding to a Telephone Call (Trunking Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Making a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . 38 Making a Talkgroup Call . . . . . . . . . . . . . . . . . . . . .38 Making a Private Call (Trunking Only) . . . . . . . . . . .38 Making an Enhanced Private Call (Trunking Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Making a Telephone Call (Trunking Only) . . . . . . . .40 Repeater or Direct Operation . . . . . . . . . . . . . . . . . 41 Monitoring Features . . . . . . . . . . . . . . . . . . . . . . . . 41 Monitoring a Channel . . . . . . . . . . . . . . . . . . . . . . .41 Conventional Mode Operation . . . . . . . . . . . . . . . .42 Intelligent Lighting Indicators . . . . . . . . . . . . . . . . . 28 Advanced Features . . . . . . . . . . . . . . . . . . . . . 43 Alert Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Phone Call Display and Alert Prompts . . . . . . . . . . 32 Advanced Call Features . . . . . . . . . . . . . . . . . . . . . 43 Receiving and Making a Selective Call (ASTRO Conventional Only) . . . . . . . . . . . . . . . . . . . . . . . . .43 General Radio Operation . . . . . . . . . . . . . . . . .33 Receiving a Selective Call . . . . . . . . . . . . . . . . . . .43 Making a Selective Call . . . . . . . . . . . . . . . . . . . . .44 Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . 33 iv English Using the Talkgroup Call Feature (Conventional Operation Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Requesting a Reprogram (Trunking Only) . . . . . . . 46 Classifying Regrouped Radios . . . . . . . . . . . . . . . . 47 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Making a Private Call from Contacts . . . . . . . . . . . .48 Adding a New Contact Entry . . . . . . . . . . . . . . . . . .49 Deleting a Contact Entry . . . . . . . . . . . . . . . . . . . . .50 Adding a Contact to a Call List . . . . . . . . . . . . . . . .51 Removing a Contact from a Call List . . . . . . . . . . . .51 Editing a Contact in a Call List . . . . . . . . . . . . . . . .52 Call Alert Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Receiving a Call Alert Page . . . . . . . . . . . . . . . . . . 58 Sending a Call Alert Page . . . . . . . . . . . . . . . . . . . 58 Emergency Operation . . . . . . . . . . . . . . . . . . . . . . . 60 Sending an Emergency Alarm . . . . . . . . . . . . . . . . 60 Sending an Emergency Call (Trunking Only) . . . . 61 Sending an Emergency Alarm with Emergency Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Sending a Silent Emergency Alarm . . . . . . . . . . . . 62 Using the Emergency Keep-Alive Feature . . . . . . . 62 Editing an Entry Alias . . . . . . . . . . . . . . . . . . . . . . . 52 Editing as Entry ID . . . . . . . . . . . . . . . . . . . . . . . . . 52 Editing a Call Type . . . . . . . . . . . . . . . . . . . . . . . . . 53 Automatic Registration Service (ARS) . . . . . . . . . . 63 Selecting or Changing the ARS Mode . . . . . . . . . . 63 Accessing the User Login Feature . . . . . . . . . . . . . 64 Viewing Details of a Contact . . . . . . . . . . . . . . . . . .53 Logging In as a User . . . . . . . . . . . . . . . . . . . . . . . 64 Logging Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Viewing a Scan List . . . . . . . . . . . . . . . . . . . . . . . . .54 Editing the Scan List . . . . . . . . . . . . . . . . . . . . . . . .54 Changing the Scan List Status . . . . . . . . . . . . . . . . 55 Viewing and Changing the Priority Status . . . . . . . 56 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Turning Scan On or Off . . . . . . . . . . . . . . . . . . . . . .56 Contents Selecting a Talkgroup . . . . . . . . . . . . . . . . . . . . . . 44 Sending a Status Call . . . . . . . . . . . . . . . . . . . . . . .45 Using the Dynamic Regrouping Feature (Trunking Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Making a Dynamic Priority Change (Conventional Scan Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Deleting a Nuisance Channel . . . . . . . . . . . . . . . . 57 Restoring a Nuisance Channel . . . . . . . . . . . . . . . 57 Text Messaging Service (TMS) . . . . . . . . . . . . . . . . 66 Accessing the TMS Features . . . . . . . . . . . . . . . . . 66 Composing and Sending a New Text Message . . . 67 Sending a Quick Text Message . . . . . . . . . . . . . . . 68 Using the Priority Status and Request Reply Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Appending a Priority Status to a Text Message . . 70 English Removing a Priority Status from a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Appending a Request Reply to a Text Message . . 70 Removing a Request Reply from a Text Message 71 Appending a Priority Status and a Reply Request to a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . 71 Removing a Priority Status and a Reply Request from a Text Message . . . . . . . . . . . . . . . . . . . . . . . 71 Managing Text Messages . . . . . . . . . . . . . . . . . . . 72 Receiving a Text Message . . . . . . . . . . . . . . . . . . 72 Viewing a Text Message from the Inbox . . . . . . . . 72 Replying to a Received Text Message . . . . . . . . . 73 Accessing the Drafts Folder . . . . . . . . . . . . . . . . . . 74 Managing Sent Text Messages . . . . . . . . . . . . . . . 74 Contents Viewing a Sent Text Message . . . . . . . . . . . . . . . . 74 Sending a Sent Text Message . . . . . . . . . . . . . . . 75 Deleting a Text Message . . . . . . . . . . . . . . . . . . . . 76 Deleting All Text Messages . . . . . . . . . . . . . . . . . . 76 Secure Operations . . . . . . . . . . . . . . . . . . . . . . . . . 77 Selecting Secure Transmissions . . . . . . . . . . . . . . 77 Selecting Clear Transmissions . . . . . . . . . . . . . . . . 77 Managing Encryption . . . . . . . . . . . . . . . . . . . . . . . 77 vi English Loading an Encryption Key . . . . . . . . . . . . . . . . . . 77 Using the Multikey Feature . . . . . . . . . . . . . . . . . . 78 Selecting an Encryption Key . . . . . . . . . . . . . . . . . 78 Selecting a Keyset . . . . . . . . . . . . . . . . . . . . . . . . . 79 Erasing the Selected Encryption Keys . . . . . . . . . . 79 Requesting an Over-the-Air Rekey (ASTRO Conventional Only) . . . . . . . . . . . . . . . . . . . . . . . . .80 MDC Over-the-Air Rekeying (OTAR) Page . . . . . .81 Hear Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Radio Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Unlocking Your Radio . . . . . . . . . . . . . . . . . . . . . . .82 Changing Your Password . . . . . . . . . . . . . . . . . . . .82 Enabling or Disabling the Radio Lock Feature (Secure Radios Only) . . . . . . . . . . . . . . . . . . . . . . .83 The Global Positioning System (GPS) . . . . . . . . . . 83 Understanding the GPS Feature . . . . . . . . . . . . . . .83 Enhancing GPS Performance . . . . . . . . . . . . . . . . .84 The Outdoor Location Feature (Using GPS) . . . . . .84 Accessing the Outdoor Location Feature . . . . . . . .85 Saving a Waypoint . . . . . . . . . . . . . . . . . . . . . . . . .86 Viewing a Saved Waypoint . . . . . . . . . . . . . . . . . . .87 Editing the Alias of a Waypoint . . . . . . . . . . . . . . . .88 Editing the Coordinates of a Waypoint . . . . . . . . . .89 Deleting a Single Saved Waypoint . . . . . . . . . . . . .90 Deleting All Saved Waypoints . . . . . . . . . . . . . . . .90 Measuring the Distance and Bearing from a Saved Waypoint . . . . . . . . . . . . . . . . . . . . . . . . . . .91 Using the Location Feature While in Emergency Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91 Trunking System Controls . . . . . . . . . . . . . . . . . . . 92 Using the Failsoft System . . . . . . . . . . . . . . . . . . . .92 Viewing the Current Site . . . . . . . . . . . . . . . . . . . . 93 Changing the Current Site . . . . . . . . . . . . . . . . . . . 93 Mission Critical Wireless - Bluetooth - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Turning On Bluetooth . . . . . . . . . . . . . . . . . . . . . . .94 Turning Off Bluetooth . . . . . . . . . . . . . . . . . . . . . . .95 Re-Pair Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Bluetooth Drop Timer . . . . . . . . . . . . . . . . . . . . . . .96 Pairing Bluetooth Device with the Radio . . . . . . . . .97 Indicating Bluetooth Connection is Lost . . . . . . . . .98 Turning On the Bluetooth Audio (Routing the Audio from the Radio to the Headset) . . . . . . . . . . . . . . .98 Turning Off the Bluetooth Audio (Routing the Audio from the Headset to the Radio) . . . . . . . . . . . . . . . .99 Adjusting the Volume of the Radio from Bluetooth Audio Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 Viewing the Bluetooth Active Devices . . . . . . . . . . .99 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Viewing the Recent Calls . . . . . . . . . . . . . . . . . . .100 Using the Flip Display . . . . . . . . . . . . . . . . . . . . . .101 Selecting a Basic Zone Bank . . . . . . . . . . . . . . . .101 Selecting an Enhanced Zone Bank . . . . . . . . . . . .102 Selecting the Power Level . . . . . . . . . . . . . . . . . . Selecting a Radio Profile . . . . . . . . . . . . . . . . . . . Enabling and Disabling the Radio Alias . . . . . . . . Selecting the Audio Speaker . . . . . . . . . . . . . . . . Controlling the Display Backlight . . . . . . . . . . . . . Locking and Unlocking the Keypad . . . . . . . . . . . Turning Keypad Tones On or Off . . . . . . . . . . . . . Turning Voice Mute On or Off . . . . . . . . . . . . . . . Using the Time-Out Timer . . . . . . . . . . . . . . . . . . Setting the Time and Date . . . . . . . . . . . . . . . . . . 102 103 103 103 104 105 105 105 105 106 Contents Going Out of Range . . . . . . . . . . . . . . . . . . . . . . . .92 Using the Site Trunking Feature . . . . . . . . . . . . . . .92 Locking and Unlocking a Site . . . . . . . . . . . . . . . . .93 Viewing and Changing a Site . . . . . . . . . . . . . . . . .93 Editing the Time and Date . . . . . . . . . . . . . . . . . 106 Using the Conventional Squelch Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Analog Options . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Digital Options . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Using the PL Defeat Feature . . . . . . . . . . . . . . . . Using the Digital PTT ID Feature . . . . . . . . . . . . . Using the Smart PTT Feature (Conventional Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing the Battery Information . . . . . . . . . . . . Accessing the General Radio Information . . . . . . 107 108 108 109 109 Accessing the Radio Information . . . . . . . . . . . . Viewing the IP Information . . . . . . . . . . . . . . . . . Viewing the Control Assignments . . . . . . . . . . . . Editing the Soft ID . . . . . . . . . . . . . . . . . . . . . . . . 109 110 111 111 Voice Announcement . . . . . . . . . . . . . . . . . . . . . . 112 vii English Helpful Tips . . . . . . . . . . . . . . . . . . . . . . . . . . .114 Caring for Your Radio . . . . . . . . . . . . . . . . . . . . . . 114 Cleaning Your Radio . . . . . . . . . . . . . . . . . . . . . . 115 Handling Your Radio . . . . . . . . . . . . . . . . . . . . . . 115 Servicing Your Radio . . . . . . . . . . . . . . . . . . . . . . 116 Appendix: Maritime Radio Use in the VHF Frequency Range . . . . . . . . . . . . . . . . . . . . . 119 Special Channel Assignments . . . . . . . . . . . . . . . 119 Emergency Channel . . . . . . . . . . . . . . . . . . . . . . .119 Non-Commercial Call Channel . . . . . . . . . . . . . . .119 Taking Care of the Battery . . . . . . . . . . . . . . . . . . 116 Checking the Battery Charge Status . . . . . . . . . . 116 Operating Frequency Requirements . . . . . . . . . . 120 LED and Sounds . . . . . . . . . . . . . . . . . . . . . . . . . 116 Fuel Gauge Icon . . . . . . . . . . . . . . . . . . . . . . . . . 116 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Battery Recycling and Disposal . . . . . . . . . . . . . . 117 Commercial Warranty . . . . . . . . . . . . . . . . . . 127 Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .118 viii English Software Version Product Safety and RF Exposure Compliance All the features described in the following sections are supported by the radio's software version R05.00.00 or later. Caution Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. See Accessing the Radio Information on page 109 to determine your radio's software version. Check with your dealer or system administrator for more details of all the features supported. ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits. Important Safety Information Important Safety Information For a list of Motorola-approved antennas, batteries, and other accessories, visit the following website: http://www.motorola.com/governmentandenterprise ix English Computer Software Copyrights Computer Software Copyrights Documentation Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. English Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others. Getting Started How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . page 1 Notations Used in This Manual . . . . . . . . . . . . . . . . . . . page 1 Additional Performance Enhancement . . . . . . . . . . . . . page 2 What Your Dealer/System Administrator Can Tell You. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3 How to Use This Guide This User Guide covers the basic operation of the APX™ 6000 Portables. However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information. Throughout the text in this publication, you will notice the use of WARNING, Caution, and Note. These notations are used to emphasize that safety hazards exist, and the care that must be taken or observed. An operational procedure, practice, or condition, etc., which may result in injury or death if not carefully observed. An operational procedure, practice, or condition, etc., which may result in damage to the equipment if not carefully observed. WARNING Caution Note: Getting Started Take a moment to review the following: Notations Used in This Manual An operational procedure, practice, or condition, etc., which is essential to emphasize. English The following special notations identify certain items: Example Description Home button Buttons and keys are shown in bold print or H or as an icon. Phone Menu entries are shown similar to the way they appear on the radio’s display. This means “Press the right side of the 4-way Navigation button”. Additional Performance Enhancement Getting Started The following are some of the latest creations designed to enhance the security, quality and efficiency of APX radios. Dynamic System Resilience (DSR) DSR ensures the radio system is seamlessly switched to a backup master site dynamically in case of system failure. DSR also provides additional indication e.g. failure detection, fault recovery, and redundancy within the system to address to the user in need. Mechanisms related to the Integrated Voice and Data (IV & D) or data centric are all supported by DSR. English CrossTalk Prevention This feature prevents crosstalk scenario from happening, especially when a wideband antenna is used. This feature allows the adjustment of the Trident Transmitting SSI clock rate in the radio to be varied from the Receiving Frequency. This subsequently reduced the possibilities of radio frequency interfering spurs and prevents the issues of crosstalk. Encrypted Integrated Data (EID) EID provides security encryption and authentication of IV & D data bearer service communication between the radio and the Customer Enterprise Network. SecureNet SecureNet allows user to perform secured communications on an Analog or Motorola Data Communication (MDC) channel. The MDC OTAR feature will allow users to perform OTAR activities on an MDC channel. What Your Dealer/System Administrator Can Tell You Preparing Your Radio for Use You can also consult your dealer or system administrator about the following: • Is your radio preprogrammed with any preset conventional channels? • Which buttons have been preprogrammed to access other features? • What optional accessories may suit your needs? Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4 Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4 Attaching the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4 Attaching the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . page 5 Using the Carry Holder. . . . . . . . . . . . . . . . . . . . . . . . . . page 6 Attaching the Accessory Connector Cover . . . . . . . . . . page 6 Turning On the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8 Preparing Your Radio for Use Assemble your radio by following these steps: Check with your dealer or system administrator, if the radio is to be operated in extremely cold temperatures (less than -20°C), for the correct radio settings to ensure proper top and front display operation. English Charging the Battery To avoid a possible explosion: Preparing Your Radio for Use WARNING • DO NOT replace the battery in any area labeled “hazardous atmosphere”. • DO NOT discard batteries in a fire. The Motorola-approved battery shipped with your radio is uncharged. Prior to using a new battery, charge it for a minimum of 16 hours to ensure optimum capacity and performance. For a list of Motorola-authorized batteries available for use with your radio, see Accessories on page 118. Note: When charging a battery attached to a radio, turn the radio off to ensure a full charge. Battery Charger To charge the battery, place the battery, with or without the radio, in a Motorola-approved charger. The charger’s LED indicates the charging progress; see your charger’s user guide. For a list of chargers, see Accessories on page 118. English Attaching the Battery With the radio turned off, slide the battery into the radio’s frame until side latches click into place. Battery Latch Attaching the Antenna With the radio turned off, set the antenna in its receptacle and turn clockwise to attach it to the radio. Note: If your radio is preprogrammed with volatile-key retention, the encryption keys are retained for approximately 30 seconds after battery removal. Check with your dealer or system administrator for more information. You can view the status of your IMPRES battery. See Accessing the Radio Information on page 109 for more information. Preparing Your Radio for Use To remove the battery, turn the radio off. Squeeze the release latches on the bottom of the battery until the battery releases from the radio. Remove the battery from the radio. To remove the antenna, turn the antenna counterclockwise. Make sure you turn off the radio first. English Attaching the Accessory Connector Cover The accessory connector is located on the antenna side of the radio. It is used to connect accessories to the radio. Preparing Your Radio for Use Note: To prevent damage to the connector, shield it with the connector cover when not in use. Insert the hooked end of the cover into the slot above the connector. Press downward on the cover’s top to seat it in the slot. Once in place, rotate the thumbscrew clockwise by hand until tight. Hooked End Thumbscrew Hex Socket Head To remove the accessory connector cover, rotate the thumbscrew counterclockwise until it disengages from the radio. If the thumbscrew is too tight, use an Allen wrench to loosen it first. Rotate and lift the connector cover to disengage it from the radio. English Using the Carry Holder Position the radio within the carry holder with the main speaker facing outward. Slide the radio down into the carry holder until it clicks in place. Turning On the Radio Rotate the On/Off/Volume Control Knob clockwise until you hear a click. If the power-up test is successful, you see SELFTEST on the radio’s display momentarily, followed by the Home screen. Note: Preparing Your Radio for Use To remove the radio from the carry holder, place the tip of your fingers on the ledge of the carry holder and push at the bottom of the radio until the radio releases from it. If the power-up test is unsuccessful, you see Error XX/YY (XX/YY is an alphanumeric code). Turn off the radio, check the battery, and turn the radio back on. If the radio fails the power-up test again, record the Error XX/YY code and contact your dealer. English Adjusting the Volume Preparing Your Radio for Use To increase the volume, turn the On/Off/Volume Control Knob clockwise. Main Speaker To turn off the radio, rotate the On/Off/Volume Control Knob counterclockwise until you hear a click. English To decrease the volume, turn this knob counterclockwise. Note: Ensure that the main speaker is pointed towards you for increased loudness and intelligibility, especially in areas with loud background noises. Identifying Radio Controls Radio Parts and Controls . . . . . . . . . . . . . . . . . . . . . . page 10 Programmable Features . . . . . . . . . . . . . . . . . . . . . . . page 11 Assignable Radio Functions . . . . . . . . . . . . . . . . . . page 11 Assignable Settings or Utility Functions. . . . . . . . . . page 13 Accessing the Preprogrammed Functions. . . . . . . . . . page 13 Using the Menu Select Buttons . . . . . . . . . . . . . . . . page 13 Using the Navigation Buttons. . . . . . . . . . . . . . . . . . page 14 Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15 Keypad Characters – Uppercase Mode. . . . . . . . . . page 15 Keypad Characters – Lowercase Mode. . . . . . . . . . page 16 Keypad Characters – Numeric Mode. . . . . . . . . . . . page 17 Keypad Characters – Hexadecimal Mode . . . . . . . . page 18 Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . . . page 19 Identifying Radio Controls Take a moment to review the following: English Radio Parts and Controls 16-Position 1 Antenna On/Off/Volume 25 Select Knob* 15 Control Knob LED 3-Position A/B/C Top (Orange) 14 Switch* Identifying Radio Controls 3 Button* Top 13 4 Microphone 2-Position Concentric Switch* 24 Display 23 Microphone 12 Main Display Menu Select 11 Buttons Accessory Connector Data Feature 10 Button Top Side (Select) 16 Button* Push-to-Talk 17 (PTT) Button Main 22 Speaker Bluetooth 21 Pairing 6 Home Button 9 Keypad 18 Side Button 1* Indicator 20 Battery 4-Way 7 Navigation 19 Side Button 2* Button 8 Battery Latch 10 English * These radio controls/buttons are programmable. Programmable Features Bluetooth Clear All Pairing – Allows you to clear all pairing info for Bluetooth. Call Alert – Allows the radio to function like a pager, or to verify if a radio is active on the system. The programmable buttons can be programmed as shortcuts to radio functions or preset channels/groups depending on the duration of a button press: Contacts – Selects the Contacts menu. • Press – Pressing and releasing rapidly. • Long press – Pressing and holding for the preprogrammed duration (between 0.25 seconds and 3.75 seconds). Call Response – Allows you to answer a private call. Channel – Selects a channel. Dynamic Priority (Conventional Only) – Allows any channel in a scan list (except for the Priority-One channel) to temporarily replace the Priority-Two channel. Emergency – Depending on the programming, initiates or cancels an emergency alarm or call. • Hold down – Keeping the button pressed. Information – Displays the information of the radio. Assignable Radio Functions Internet Protocol Address – Displays the Internet Protocol (IP) address, device name and status of the radio. Bluetooth On/Off – Allows you to turn on/off the Bluetooth. Bluetooth Configuration – Allows you to access to the Bluetooth menu. Bluetooth Audio Reroute – Allows you to toggle the audio route between radio speaker or Remote Speaker Microphone and Bluetooth headset. Bluetooth Headset PTT – Function like a PTT button, but is used to keyup the Bluetooth Headset's microphone. Identifying Radio Controls Any reference in this manual to a control that is “preprogrammed” means that the control must be programmed by a dealer or qualified radio technician using the radio's programming software, in order to assign a feature to that control. Location – Determines the current location (latitude, longitude, time and date), and also the distance and bearing to another location. Or, turns the GPS functionality on or off for all location. Message – Enters the current message list. Monitor (Conventional Only) – Monitors a selected channel for all radio traffic until function is disabled. Multiple Private Line (Conventional Only) – Selects the Mulitple Private Line lists. 11 English Nuisance Delete – Temporarily removes an unwanted channel, except for priority channels or the designated transmit channel, from the scan list. One Touch 1 – 4 – Launches a specific feature with one single button-press. You can setup as much as four separately programmed buttons for four different features. Identifying Radio Controls Phone – Allows you to make and receive calls similar to standard phone calls. Request-To-Talk (Conventional Only) – Notifies the dispatcher that you want to send a voice call. Scan – Toggles scan on or off. Selective Call (Conventional Only) – Calls an assigned radio. Site Display (Trunking Only) – Displays the current site ID and RSSI value. Site Lock/Unlock (Trunking Only) – Locks onto a specific site. Private Call (Trunking Only) – Allows a call from an individual radio to another individual radio. Site Search (Trunking Only) – Performs site search for AMSS (Automatic Multiple Site Select) or SmartZone operation. Private Line Defeat (Conventional Only) – Overrides any coded squelch (DPL or PL) that is preprogrammed to a channel. Status – Sends data calls to the dispatcher about a predefined status. Radio Profiles – Allows for easy access to a set of preprogrammed visual and audio settings of the radio. Talkaround/Direct (Conventional Only) – Toggles between using a repeater and communicating directly with another radio. Recent Calls – Allows for easy access to the list of calls recently received or made. Talkgroup (Conventional Only) – Allows a call from an individual radio to a group of radios. Rekey Request – Notifies the dispatcher that you want a new encryption keys. Text Messaging Service (TMS) – Selects the text messaging menu. Repeater Access Button (RAB) (Conventional Only) – Allows to manually send a repeater access codeword. TMS Quick Text – Selects a predefined message. Reprogram Request (Trunking Only) – Notifies the dispatcher that you want a new dynamic regrouping assignment. User – Automatically registers with the server. Zone Select – Allows selection from a list of zones. Basic Zone Bank – Allows selection from a larger list of zones. 12 English Enhanced Zone Bank – Allows selection from a list of banks with three different zones in each bank. Accessing the Preprogrammed Functions You can access various radio functions through one of the following ways: Flip – Flips the content of the top display. • A short or long press of the relevant programmable buttons. Keypad Lock – Toggles the keypad lock on or off. Light – Toggles display backlight on or off. Voice Announcement – Audibly indicates the current feature mode, Zone or Channel the user has just assigned. Voice Mute – Toggles voice mute on or off. Volume Set Tone – Sets the volume set tone. OR • Use the Menu Select Buttons ({, |, and }). Using the Menu Select Buttons The Menu Select buttons access the menu entries of features. Note: Check with your dealer or system administrator for the list of features activated in your radio. Your radio may be preprogrammed differently from the following example, but the steps for selecting a channel may appear as shown below: Identifying Radio Controls Assignable Settings or Utility Functions • Press the Menu Select button ( | ) directly below Chan. Zone | Chan | MyId Menu Select Buttons Data Feature Button Home Button 4-Way Navigation Button 13 English Using the Navigation Buttons Data Feature Button Home Button Use this button to access data-related features, such as the Text Messaging Service (TMS) feature screen. The H button returns you to the Home (default) screen. In most cases, this is the current mode. 4-Way Navigation Button Identifying Radio Controls For selected radio features, the H button is also used to save user-edited radio settings or information before returning you to the Home screen. Note: 14 English Some features do not require you to press H to go to the Home screen. Refer to the individual feature sections in this manual for further details on saving user-edited radio settings or information. Use this button to scroll up, down, left or right. Press and release one of the button to scroll from one entry to the next one. Press and hold one of the button to have the radio toggles through the list automatically (release the button to stop). Using the Keypad Keypad Characters – Uppercase Mode Number of Times Key is Pressed Key 10 11 12 13 14 15 16 17 18 19 20 21 “ ‘ Toggle between mixed case mode, uppercase mode, and lowercase mode. Space Toggle between numeric and letter mode. Identifying Radio Controls You can use the 3 x 4 alphanumeric keypad to access your radio’s features. The keypad functions in a manner similar to a standard telephone keypad when entering numeric digits. When the keypad is used to edit a list, each key can generate different characters of the alphabet. The tables below show the number of times a key needs to be pressed to generate the required character. 15 English Keypad Characters – Lowercase Mode Identifying Radio Controls Number of Times Key is Pressed Key 10 11 12 13 14 15 16 17 18 19 20 21 “ ‘ Toggle between mixed case mode, uppercase mode, and lowercase mode. Space Toggle between numeric and letter mode. 16 English Keypad Characters – Numeric Mode Key 10 11 12 13 14 15 16 17 18 19 20 21 “ ‘ Space Toggle between numeric and letter mode. Identifying Radio Controls Number of Times Key is Pressed 17 English Keypad Characters – Hexadecimal Mode Identifying Radio Controls Number of Times Key is Pressed Key Not applicable Not applicable 18 English 10 11 12 13 14 15 16 17 18 19 20 21 Push-To-Talk (PTT) Button Your radio indicates its operational status through the following: • While a call is in progress, the PTT button allows the radio to transmit to other radios in the call. Press and hold down PTT button to talk. Release the PTT button to listen. The microphone is activated when the PTT button is pressed. • While a call is not in progress, the PTT button is used to make a new call. See Making a Radio Call on page 38 for more information. PTT Button Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20 Text Messaging Service (TMS) Icons. . . . . . . . . . . . . . page 23 Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 23 TMS Menu Options. . . . . . . . . . . . . . . . . . . . . . . . . . page 25 Call Type Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 26 LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 27 Intelligent Lighting Indicators . . . . . . . . . . . . . . . . . . . . page 28 Alert Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 29 Phone Call Display and Alert Prompts . . . . . . . . . . . . . page 32 Identifying Status Indicators The PTT button on the side of the radio serves two basic purposes: Identifying Status Indicators 19 English Status Icons The 130 x 130 pixel front liquid crystal display (LCD) of your radio shows radio status, text entries, and menu entries. The top two display rows contain color icons that indicate radio operating conditions. Identifying Status Indicators Selected icons are also shown on the first row of the 112 x 32 pixel top monochrome display screen of your radio. The following icons are for the front display screen unless indicated otherwise. Receiving Radio is receiving a call or data. Transmitting Radio is transmitting a call or data. Top Display Top Display Top Display 20 English Call Received Radio has received an Individual Call. Top Display Battery The number of bars (0 – 4) shown indicates the charge remaining in the battery. Blinks when the battery is low. Received Signal Strength Indicator (RSSI) The number of bars displayed represents the received signal strength for the current site, for trunking only. The more stripes in the icon, the stronger the signal. Direct • On = Radio is currently configured for direct radio-to-radio communication (during conventional operation only). • Off = Radio is connected with other radios through a repeater. Monitor (Carrier Squelch) Selected channel is being monitored (during conventional operation only). Priority Channel Scan • On = The feature is enabled. Voice muting of • Blinking dot = Radio detects activity on the affiliated trunking talkgroup or selected conventional channel is activated. • Off = The feature is disabled. Voice muting of the affiliated trunking talkgroup or selected conventional channel is deactivated. H . or Top Display H L channel designated as Priority-One. Top Display Top Display • Steady dot = Radio detects activity on channel designated as Priority-Two. View/Program Mode Radio is in the view or program mode. Power Level • On steady = View mode • L = Radio is set at Low power. • Blinking = Program mode • H = Radio is set at High power. or Vote Scan Enabled The vote scan feature is enabled. Top Display Scan Radio is scanning a scan list. Top Display Identifying Status Indicators In-Call User Alert Basic Zone Bank 1 Top Display • A = Radio is in Zone 1. A B• C • or B = Radio is in Zone 2. C = Radio is in Zone 3. or 21 English Basic Zone Bank 2 Top Display • D = Radio is in Zone 4. D E• F • or E = Radio is in Zone 5. AES Secure Operation • On = AES Secure operation. • Off = Clear operation. • Blinking = Receiving an encrypted voice call. F = Radio is in Zone 6. Identifying Status Indicators or Top Display AB x y ... ... or Top Display 22 English Enhanced Zone Bank A = Contains Zone 1, Zone 2 and Zone 3, B = Contains Zone 4, Zone 5 and Zone 6, C = Contains Zone 7, Zone 8 and Zone 9, X = Contains Zone 70, Zone 71 and Zone 72, Y = Contains Zone 73, Zone 74 and Zone 75. Secure Operation Location Signal • On = Location feature is enabled, and location signal is available. • Off = Location feature is disabled. • Blinking = Location feature is enabled, but no location signal is available. User Login Indicator (IP Packet Data) • On = User is currently associated with the radio. • Off = User is currently not associated with the radio. • On = Secure operation. • Blinking = Device registration or user • Off = Clear operation. registration with the server failed due to an invalid username or pin. • Blinking = Receiving an encrypted voice call. Data Activity Data activity is present. b Bluetooth On Bluetooth is on and ready for bluetooth connection. Text Messaging Service (TMS) Icons This feature allows you to send and receive text messages. See Text Messaging Service (TMS) on page 66 for more information. Status Icons Top Display The following icons appear on the radio’s display when you send and receive text messages. Bluetooth Connected Bluetooth is currently connected to the external bluetooth device. Top Display Inbox Full The Inbox is full. Message Sent The text message is sent successfully. Message Unsent The text message cannot be sent. Identifying Status Indicators Hexadecimal Indicates that the text entry is currently in hexadecimal mode. Unread Message • User receives a new message. • The selected text message in the Inbox has not been read. 23 English Request Reply Normal Message User is composing a message with normal priority and without a request for a reply. • Messages in the Inbox folder are flagged with 3/6 Message Index Indicates the index of the current message the user is viewing. Example: If the user is looking at the third message out of a total of 6 messages in the Inbox folder, the icon is displayed as the icon on the left column. Identifying Status Indicators Read Message The selected text message in the Inbox has been read. 24 English Priority Status • The “Priority” feature is toggled on before the message is sent. • Messages in the Inbox folder are flagged with “Priority”. • The “Request Reply” feature is toggled on before the message is sent. “Request Reply”. Priority Status and Request Reply • User is composing a message with a priority status and a request for a reply. • Messages in the Inbox folder are flagged with “Priority” and “Request Reply”. Numeric Indicates that the text entry is currently in numeric mode. Start Case Indicates that the first character of the text entry is capitalized. Mixed Case Indicates that the text entry is currently in normal text mode. Uppercase Indicates that the text entry is currently in uppercase mode. TMS Menu Options Menu Option Back Description/Function Brings you back to the previous screen. Clr Deletes all messages. Del Deletes a message or text. Edit Brings you to the edit screen. Exit Exits to the Home screen. No Returns to the previous screen. Optn Brings you to the Options main screen. Rply Replies to a message. Sel Send Yes Selects the highlighted command. Sends the message. Updates or saves a command. Identifying Status Indicators Lowercase Indicates that the text entry is currently in lowercase mode. 25 English Call Type Icons The following icons appear on the radio’s main display, when you make or receive a call, or view selected call lists, to indicate the different call types associated with an alias or ID. Identifying Status Indicators 26 English Landline phone number. Landline phone number added to a Call List. Radio number. Incoming call or data. Radio number added to a Call List. Outgoing call or data. Mobile number. Incoming emergency call. Mobile number added to a Call List. Rapidly blinking red – Radio has failed the self test upon powering up or encountered a fatal error. LED Indicator Solid yellow – Channel is busy. Blinking yellow – Radio is receiving a secured transmission. LED Indicator Solid green – Radio is powering up, or is on a non-priority channel while in the Scan List Programming mode. Blinking green – Radio is receiving an individual or telephone call, or is on a Priority-Two channel while in the Scan List Programming mode. Rapidly blinking green – Radio is on a Priority-One channel while in the Scan List Programming mode. Identifying Status Indicators The LED indicator shows the operational status of your radio. Solid red – Radio is transmitting. Blinking red – Radio is transmitting at low battery condition. 27 English Intelligent Lighting Indicators This feature temporary changes the backlight of the top display screen and the keypad, and adds a color bar to the main display screen to help signal that a radio event has occurred. Identifying Status Indicators Note: 28 English This feature must be preprogrammed by a qualified radio technician. Backlight and Bar Color Notification Orange Emergency Alerts When The radio initiates an emergency alarm or call. The radio receives an emergency alarm or call. The radio battery is low. The radio is out of range. Red Critical Alerts The radio enters failsoft mode. The radio is unable to establish a full connection with the system. The radio is unable to authenticate or register with the system. The radio receives a private call. Green Call Alerts The radio receives a phone call. The radio receives a call alert. The radio receives a selective call. Alert Tones You Hear Short, Low-Pitched Tone Tone Name Radio Self Test Fail When radio fails its power-up self test. Reject When unauthorized request is made. Time-Out Timer Warning No ACK Received Individual Call Warning Tone Long, Low-Pitched Tone A Group of Low-Pitched Tones Heard Time-Out Timer Timed Out Talk Prohibit/PTT Inhibit Four seconds before time out. When radio fails to receive an acknowledgment. When radio is in an individual call for greater than 6 seconds without any activity. After time out. (When PTT button is pressed) transmissions are not allowed. Out of Range (When PTT button is pressed) the radio is out of range of the system. Invalid Mode When radio is on an unpreprogrammed channel. Busy Identifying Status Indicators An alert tone is a sound or group of sounds. Your radio uses alert tones to inform you of your radio’s conditions. The following table lists these tones and when they occur. When system is busy. 29 English You Hear Tone Name Valid Key-Press Radio Self Test Pass Short, Medium-Pitched Tone Clear Voice Priority Channel Received Identifying Status Indicators Emergency Alarm Entry Central Echo Long, Medium-Pitched Tone Volume Set Emergency Exit Failsoft Automatic Call Back Talk Permit A Group of Medium-Pitched Tones 30 English Keyfail Console Acknowledge Received Individual Call Heard When correct key is pressed. When radio passes its power-up self test. At beginning of a non-coded communication. When activity on a priority channel is received. When entering the emergency state. When central controller has received a request from a radio. When volume is changed on a quiet channel. When exiting the emergency state. When the trunking system fails. When voice channel is available from previous request. (When PTT button is pressed) verifying system accepting transmissions. When encryption key has been lost. When status, emergency alarm, or reprogram request ACK is received. When Call Alert or Private Call is received. Call Alert Sent When Call Alert is received by the target radio. Site Trunking When a SmartZone trunking system fails. Tone Name Short, High-Pitched Tone (Chirp) Low-Battery Chirp Fast Ringing Ringing Heard When battery is below preset threshold value. When system is searching for target of Private Call. Enhanced Call Sent When waiting for target of Private Call to answer the call. Phone Call Received When a land-to-mobile phone call is received. Gurgle Dynamic Regrouping (When the PTT button is pressed) a dynamic ID has been received. Unique, Low-Pitched Chirp New Message When a new message is received. Unique, High-Pitched Chirp Priority Status When a priority message is received. IncrementalPitched Tone DecrementalPitched Tone Bluetooth Paired Tone When Bluetooth accessory is paired with the radio. Bluetooth Connected Tone When Bluetooth accessory is connected to the radio. Bluetooth Unpaired Tone When Bluetooth accessory is unpaired from the radio. Bluetooth Disconnected Tone When Bluetooth accessory is disconnected from the radio. Identifying Status Indicators You Hear 31 English Phone Call Display and Alert Prompts Identifying Status Indicators The following appears on the radio’s display when you make and receive Phone calls. The radio also uses alert tones to indicate the current status. You Hear You See When A Long Tone No phone You press the PTT button and the phone system is not available. Press H to hang up. The radio returns to the Home screen. Phone busy The phone system is busy. Press H to exit the phone mode and try your call later. Phone busy When a channel is not available. The radio automatically connects when a channel opens. A Busy Tone No The call is not acknowledged. acknowledge – A HighPitched Tone Note: 32 English – When you release the PTT button. Notes Press H to hang up. The radio returns to the Home screen. The radio indicates to the landline party that he or she may begin talking. You have the option of sending additional digits (overdial), such as an extension number, or credit card or PIN numbers, to the phone system. If the radio is preprogrammed for live overdial, every digit entered after the call is connected is sent to the phone system. If the radio is preprogrammed for buffered overdial, the digits pressed are entered into memory and then sent when the PTT button is pressed. Press the PTT button to send either digits or voice, but not both at the same time. General Radio Operation General Radio Operation Once you understand how your APX 6000 Portable is configured, you are ready to use your radio. Selecting a Zone A zone is a group of channels. 3-Position A/B/C Switch Use this navigation guide to familiarize yourself with the basic Call features: Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 33 Selecting a Radio Channel . . . . . . . . . . . . . . . . . . . . . page 34 Receiving and Responding to a Radio Call . . . . . . . . . page 35 Making a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . . . page 38 Repeater or Direct Operation . . . . . . . . . . . . . . . . . . . page 41 Monitoring Features. . . . . . . . . . . . . . . . . . . . . . . . . . . page 41 Use the following procedure to select a zone. Note: Your radio must be preprogrammed to allow you to use this feature. Procedure: Move the preprogrammed Zone (3-Position A/B/C) switch to the position of the required zone and proceed to Step 3. 33 English OR Follow the procedure below. 1 < or > to Zone. 2 Press the Menu Select button directly below Zone. Selecting a Radio Channel A channel is a group of radio characteristics, such as transmit/ receive frequency pairs. 3 U or D to the required zone. OR Use the keypad to enter the zone number. General Radio Operation 4 If the zone number entered is unprogrammed, the display shows Invalid entry. Repeat Step 3. OR Press the Menu Select button directly below Sel to confirm the displayed zone. 5 Press the PTT button to transmit on the displayed zone channel. 34 English Use the following procedure to select a channel. Note: Your radio must be preprogrammed to allow you to use this feature. If you select a channel that is not within the preprogrammed band, the radio indicates that it is on an unsupported frequency with both audio and visual warnings. Consult a qualified radio technician for the right choice between the following methods. Receiving and Responding to a Radio Call Once you have selected the required channel and/or zone, you can proceed to receive and respond to calls. 1 < or > to Chan. 2 Press the Menu Select button directly below Chan. LED Indicator 3 U or D to the required channel. OR Use the keypad to enter the channel number. 4 If the channel number entered is unprogrammed, the display shows Invalid entry. Repeat Step 3. OR Press the Menu Select button directly below Sel to confirm the selected channel. General Radio Operation Procedure: Turn the preprogrammed 16-Position Select knob to the desired channel. OR Follow the procedure below. 5 Press the PTT button to transmit on the displayed zone channel. The LED lights up solid red while the radio is transmitting, and solid yellow when the radio is receiving a transmission (conventional mode only). There is no LED indication when the radio receives a transmission in trunking mode. If the radio is receiving a secure transmission, the LED blinks yellow. 35 English Receiving and Responding to a Talkgroup Call To receive a call from a group of users, your radio must be configured as part of that talkgroup. Procedure: When you receive a talkgroup call (while on the Home screen), depending on how your radio is preprogrammed: General Radio Operation 1 ASTRO Conventional Only: The LED lights up solid yellow. The display shows the talkgroup alias or ID, and the caller alias or ID. OR Trunking Only: The display shows the caller alias or ID. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to respond to the call. The LED lights up solid red. 4 Release the PTT button to listen. See Making a Talkgroup Call on page 38 for details on making a Talkgroup Call. 36 English Receiving and Responding to a Private Call (Trunking Only) A Private Call is a call from an individual radio to another individual radio. These one-to-one calls between two radios are not heard by others in the current talkgroup. The calling radio automatically verifies that the receiving radio is active on the system and can display the caller ID. Note: The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Procedure: When you receive a Private Call: 1 You hear two alert tones and the LED blinks green. The display shows Call received and the call received icon blinks. 2 Press the Menu Select button directly below Resp. 3 During the call, the display shows the caller alias (name), if it is in the call list. OR During the call, the display shows the caller ID (number), if the caller’s name is not in the call list. 4 Press and hold the PTT button to talk. Release the PTT button to listen. 5 Press H or the Call Response button to hang up and return to the Home screen. See Making a Private Call (Trunking Only) on page 38 for details on making a Private Call. Receiving and Responding to a Telephone Call (Trunking Only) This feature allows you to receive calls similar to standard phone calls from a landline phone. Note: The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Procedure: Use the preprogrammed Call Response button to answer a Telephone Call: 1 You hear a telephone-type ringing and the LED blinks green. The backlight of the screen and the bar turns green. The display shows Phone Call and the call received icon blinks. General Radio Operation OR Press the Call Response button within 20 seconds after the call indicators begin. 2 Press the Call Response button within 20 seconds after the call indicators begin. 3 Press and hold the PTT button to talk. Release the PTT button to listen. 4 Press H or the Call Response button to hang up and return to the Home screen. See Making a Telephone Call (Trunking Only) on page 40 for details on making a Telephone Call. 37 English Making a Radio Call 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. You can select a zone, channel, subscriber ID, or talkgroup by using: • The preprogrammed Zone switch • The Channel Selector Knob • A preprogrammed One Touch Call button • The Contacts list (see Viewing Details of a Contact on General Radio Operation page 53) Note: The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. 3 Press the PTT button to make the call. 4 ASTRO Conventional Only: The LED lights up solid red. The display shows the talkgroup alias or ID. OR Trunking Only: The LED lights up solid red. 5 Speak clearly into the microphone. 6 Release the PTT button to listen. Making a Private Call (Trunking Only) Procedure: Procedure: Press the preprogrammed Quick Access (One-Touch) Private Call button to dial the preprogrammed ID (number) and proceed to Step 5. OR Follow the procedure below. 1 Turn the Channel Selector Knob to select the channel with 1 < or > to Call. Making a Talkgroup Call To make a call to a group of users, your radio must be configured as part of that talkgroup. the desired talkgroup. 38 English 2 Press the Menu Select button directly below Call. The display shows the last transmitted or received ID. through and select the required ID. OR Press the Menu Select button directly below LNum to go to the last number dialed. OR U or D to the required ID. OR Use the keypad to enter the required ID. 4 Press the PTT button to start the Private Call. 5 The display shows Calling.... 6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 7 When you are connected, the display shows the ID of the target radio. Press and hold the PTT button to talk. Release the PTT button to listen. OR If no acknowledgment is received, the display shows No acknowledge. 8 Press H to return to the Home screen. This feature allows you to send an individual Call Alert page if there is no answer from the target radio. See Sending a Call Alert Page on page 58 for more information. Note: Your radio must be preprogrammed to allow you to use this feature. Procedure: Press the preprogrammed Quick Access (One-Touch) Enhanced Private Call button to dial the preprogrammed ID and proceed to Step 5. OR Follow the procedure below. 1 < or > to Call. 2 Press the Menu Select button directly below Call. The General Radio Operation 3 Press the Menu Select button directly below Cnts to scroll Making an Enhanced Private Call (Trunking Only) display shows the last transmitted or received ID. 3 Press the Menu Select button directly below Cnts to scroll through and select the required ID. OR Press the Menu Select button directly below LNum to go to the last number dialed. OR U or D to the required ID. OR Use the keypad to enter the required ID. 39 English 4 Press the PTT button to start the Private Call. 5 The display shows Calling... . 6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. General Radio Operation 7 When you are connected, the display shows the ID of the target radio. Press and hold the PTT button to talk. Release the PTT button to listen. OR If no acknowledgment is received, the display shows No acknowledge. OR If the target radio does not respond before the time out, the display shows No answer. 8 Press H to return to the Home screen. Making a Telephone Call (Trunking Only) This feature allows you to make calls similar to standard phone calls to a mobile or landline phone. Procedure: Press the preprogrammed Quick Access (One-Touch) Phone Call button to dial the preprogrammed phone number and proceed to Step 5. 40 English OR Follow the procedure below. 1 < or > to Phon. 2 Press the Menu Select button directly below Phon. The display shows the last transmitted phone number. 3 Press the Menu Select button directly below Cnts to scroll through and select the required ID. OR Press the Menu Select button directly below LNum to go to the last number dialed. OR U or D to the required phone number. OR Use the keypad to enter the required phone number. 4 Press and release the PTT button to dial the phone number. 5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 6 When your call is answered, press the PTT button to talk. Release the PTT button to listen. 7 Press H to return to the Home screen. See Phone Call Display and Alert Prompts on page 32 for more information if your call is NOT answered. Monitoring Features Repeater or Direct Operation The DIRECT or “talkaround operation” allows you to bypass the repeater and connect directly to another radio. The transmit and receive frequencies are the same. Procedure: Press the preprogrammed Repeater/Direct switch to toggle between talkaround and repeater modes. OR Follow the procedure below. 1 < or > to Dir. Radio users who switch from analog to digital radios often assume that the lack of static on a digital channel is an indication that the radio is not working properly. This is not the case. Digital technology quiets the transmission by removing the “noise” from the signal and allowing only the clear voice or data information to be heard. Use the Monitor feature to make sure a channel is clear before transmitting. Monitoring a Channel 2 Press the Menu Select button directly below Dir. Procedure: Use the preprogrammed Volume Set Button button. 3 The display shows Repeater mode if the radio is currently 1 Select the desired zone and channel. in Repeater mode. OR The display shows Direct mode and the Talkaround icon if the radio is currently in Direct mode (during conventional operation only). 2 Press and hold the Volume Set button to hear the volume set tone. 3 Adjust the Volume Control knob if necessary. 4 Release the Volume Set button. 6 Release the PTT button to receive (listen). 5 Press and hold the PTT button to transmit. The LED lights OR up solid red. General Radio Operation The REPEATER operation increases the radio’s range by connecting with other radios through a repeater. The transmit and receive frequencies are different. 41 English Press the preprogrammed Monitor button and proceed to Step 3. Your radio may be preprogrammed to receive Private-Line® (PL) calls. OR Follow the procedure below. 1 Select the desired zone and channel. 2 Listen for a transmission. 3 Adjust the Volume Control knob if necessary. 4 Press and hold the PTT button to transmit. The LED lights General Radio Operation Conventional Mode Operation up solid red. 5 Release the PTT button to receive (listen). The Carrier Squelch indicator appears on the display when you monitor a channel via the preprogrammed Monitor button. 42 English Procedure: 1 Momentarily press the Monitor button to listen for activity. The Carrier Squelch indicator appears on the display. 2 Press and hold the Monitor button to set continuous monitor operation. The duration of the button press is programmable. 3 Press the Monitor button again, or the PTT button, to return to the original squelch setting. If you try to transmit on a receive-only channel, you hear an invalid tone until you release the PTT button. Advanced Features Receiving and Making a Selective Call (ASTRO Conventional Only) This feature allows you to receive a call from or to call a specific individual. It is intended to provide privacy and to eliminate the annoyance of having to listen to conversations that are of no interest to you. Receiving a Selective Call Procedure: 1 When you receive a Selective Call, you hear two alert tones Advanced Features Use this navigation guide to learn more about advanced features available with your radio: Advanced Call Features . . . . . . . . . . . . . . . . . . . . . . . page 43 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 47 Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 54 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 56 Call Alert Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 58 Emergency Operation . . . . . . . . . . . . . . . . . . . . . . . . . page 60 Automatic Registration Service (ARS). . . . . . . . . . . . . page 63 Text Messaging Service (TMS) . . . . . . . . . . . . . . . . . . page 66 Secure Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . page 77 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 82 The Global Positioning System (GPS) . . . . . . . . . . . . page 83 Trunking System Controls . . . . . . . . . . . . . . . . . . . . . . page 92 Mission Critical Wireless - Bluetooth - . . . . . . . . . . . . . page 94 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 100 Advanced Call Features and the LED lights up solid yellow. The call received icons blinks and the display shows Call received. 2 The speaker unmutes. 3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 4 Press and hold the PTT button to talk. Release the PTT button to listen. 5 Press H to return to the Home screen. 43 English Making a Selective Call Procedure: Press the preprogrammed Quick Access (One-Touch) Selective Call button to dial the preprogrammed ID and proceed to Step 4. OR Follow the procedure below. 1 < or > to Call. 2 Press the Menu Select button directly below Call. The display shows the last transmitted or received ID. Advanced Features 3 Press the Menu Select button directly below Cnts to scroll through and select the required ID. OR Press the Menu Select button directly below LNum to go to the last number dialed. OR U or D to the required ID. OR Use the keypad to enter the required ID. 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 5 Press and hold the PTT button to start the Selective Call. The display shows the ID of the target radio. 44 English 6 Release the PTT button to listen. 7 Press H to return to the Home screen. Using the Talkgroup Call Feature (Conventional Operation Only) This feature allows you to define a group of conventional system users so that they can share the use of a conventional channel. Note: Encryption keys are associated to talkgroups. When talkgroups are associated, encryption keys are changed by changing the active talkgroup. See Secure Operations on page 77 for more information. Selecting a Talkgroup Procedure: 1 < or > to Tgrp. 2 Press the Menu Select button directly below Tgrp. The display shows the last talkgroup that was selected and stored, Sel and Exit. 3 U or D to Preset for the preset preprogrammed talkgroup. 4 Press the Menu Select button directly below Sel to save the currently selected talkgroup and return to the Home screen. 5 If the encryption key associated to the new talkgroup is erased, a momentary key fail tone sounds and the display shows Key fail. OR If the encryption key that is associated to the new talkgroup is not allowed, a momentary key fail tone sounds and the display shows Illegal key. 6 Press H or the PTT button to exit. OR Turn the 16-Position Select knob to exit. Sending a Status Call This feature allows you to send data calls to the dispatcher about a predefined status. Each status can have up to a 14-character name. A maximum of eight status conditions is possible. Note: The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Procedure: Press the preprogrammed Status button and proceed to Step 3. OR Follow the procedure below. Advanced Features OR U or D to the required talkgroup. OR Use the keypad to enter the number of the corresponding talkgroup in the list. 1 < or > to Sts. 2 Press the Menu Select button directly below Sts. 3 The display shows the last acknowledged status call, or the first status in the list. 4 U or D to the required status. OR Use the keypad to enter a number corresponding to the location in the status list. 5 Press the PTT button to send the status. 45 English 6 When the dispatcher acknowledges, four tones sound and the display shows Ack received. The radio returns to normal dispatch operation. OR If no acknowledgment is received, a low-pitched tone sounds and the display shows No acknowledge. Advanced Features 7 Press H to return to the Home screen. Procedure: 1 When your radio is dynamically regrouped, it automatically switches to the dynamically regrouped channel. A “gurgle” tone sounds and the display shows the dynamically regrouped channel’s name. 2 Press the PTT button to talk. Release PTT button to listen. When the dispatcher cancels dynamic regrouping, the radio automatically returns to the zone and channel that you were using before the radio was dynamically regrouped. No traffic is heard on trunked channels while Status Calls is selected. If the radio detects no Status Call activity for six seconds, an alert tone sounds until you press H or the PTT button. Requesting a Reprogram (Trunking Only) Using the Dynamic Regrouping Feature (Trunking This feature lets you notify the dispatcher that you want a new dynamic regrouping assignment. Only) This feature allows the dispatcher to temporarily reassign selected radios to a single special channel so they can communicate with each other. This feature is typically used during special operations and is enabled by a qualified radio technician. You will not notice whether your radio has this feature enabled until a dynamic regrouping command is sent by the dispatcher. Note: 46 English If you try to access a zone or channel that has been reserved by the dispatcher as a dynamically regrouped mode for other users, an invalid tone sounds. Procedure: Press the preprogrammed Reprogram Request button to send reprogram request to the dispatcher and proceed to Step 3. OR Follow the procedure below. 1 < or > to Rpgm. 2 Press the Menu Select button directly below Rpgm to send reprogram request to the dispatcher. 3 The display shows Reprgrm rqst and Please wait. 4 If you hear five beeps, the dispatcher has acknowledged the Classifying Regrouped Radios The dispatcher can classify regrouped radios into either of two categories: Select Enabled or Select Disabled. • Select-enabled radios are free to change to any available channel, including the dynamic-regrouping channel, once the user has selected the dynamic-regrouping position. • Select-disabled radios cannot change channels while dynamically regrouped. The dispatcher has forced the radio to remain on the dynamic-regrouping channel. The Scan or Private Call feature cannot be selected while your radio is Select Disabled. This feature provides “address-book” capabilities on your radio. Each entry corresponds to an alias (name) or ID (number) that you use to initiate a call. Contacts entries are alphabetically sorted according to entry alias. Each alias can have up to 5 IDs of different call types associated with it. Additionally, each entry, depending on context (conventional, trunking, or phone), associates with one or more of the four types of calls: Phone Call, Selective Call, Private Call, or Call Alert. Advanced Features reprogram request. The display shows Ack received and the radio returns to the Home screen. OR If the dispatcher does not acknowledge the reprogram request within six seconds, a low-pitched alert tone sounds and the display shows No acknowledge. Try again or press H to cancel and return to the Home screen. Contacts Each entry within Contacts displays the following information: • Call Alias (Name) • Call ID (Number) • Call Type (Icon) • WACN ID (Astro 25 Trunking IDs only) • System ID Note: Your radio must be preprogrammed to allow you to add, edit, or delete the contact entries. 47 English Your radio also supports a maximum of 50 call lists. Each list can store up to 100 IDs (numbers). Note: Your radio is preprogrammed with a number of contacts per Call Lists. Check with your dealer or system administrator for more information. 6 U or D to select the call type. 7 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 8 Press the PTT button to initiate the call. During the call, the display shows the subscriber alias. The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Making a Private Call from Contacts Advanced Features Note: 9 Press and hold the PTT button to talk. The LED lights up solid red. OR Release the PTT button to listen. 10 If there is no voice activity for a preprogrammed period of time, the call ends. OR The call ends when it reaches the maximum ring time. Your radio must be preprogrammed to allow you to use this feature. Procedure: Use the Options Menu. 1 < or > to Cnts. 2 Press the Menu Select button directly below Cnts. The entries are alphabetically sorted. 3 U or D to the required subscriber alias. 4 Press the Menu Select button directly below Optn. 5 U or D to Call and press the Menu Select button directly below Sel. 48 English OR Use the PTT button. 1 < or > to Cnts. 2 Press the Menu Select button directly below Cnts. The entries are alphabetically sorted. 3 U or D to the required subscriber alias. 4 < or > to scroll through the available IDs for the selected subscriber alias. 5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. display shows the subscriber alias. 7 Press and hold the PTT button to talk. The LED lights up solid red. OR Release the PTT button to listen. The LED lights up solid yellow. 8 If there is no voice activity for a preprogrammed period of time, the call ends. OR The call ends when it reaches the maximum ring time. below Edit. 5 The display shows Edit name and a blinking cursor appears. Use the keypad to enter the name. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. Advanced Features 6 Press the PTT button to initiate the call. During the call, the 4 U or D to Name and press the Menu Select button directly 6 Press the Menu Select button directly below Ok once you Adding a New Contact Entry Procedure: 1 < or > to Cnts. 2 Press the Menu Select button directly below Cnts. The entries are alphabetically sorted. 3 U or D to {New Contact} and press the Menu Select button directly below Sel. have entered the name. OR Press the Menu Select button directly below Cncl to return to the previous screen. 7 U or D to {Add Number} and press the Menu Select button directly below Sel. 8 U or D to Number 1 and press the Menu Select button directly below Edit. 49 English 9 The display shows Edit Number 1 and a blinking cursor appears. Use the keypad to enter the number. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. 10 Press the Menu Select button directly below Ok once you have entered the number. OR Press the Menu Select button directly below Cncl to return to the previous screen. Advanced Features 11 U or D to Type 1 and press the Menu Select button directly below Edit. U or D to the required mode and press the Menu Select button directly below Ok. OR Repeat Steps 8 through 10 to enter or edit the existing system IDs. OR U or D to {Add Number} and press the Menu Select button directly below Sel to add a new number. Repeat Steps 8 through 10. 50 English 12 Press the Menu Select button directly below Done once you have finished. 13 The display shows Stored, confirming that the contact entry has been added. 14 The radio returns to the main Contacts screen. Deleting a Contact Entry Procedure: 1 < or > to Cnts. 2 Press the Menu Select button directly below Cnts. The entries are alphabetically sorted. 3 U or D to the entry you want to delete and press the Menu Select button directly below Optn. 4 U or D to Delete and press the Menu Select button directly below Sel. 5 The display shows Delete confirm?. 6 Select Yes to delete the entry. The display shows deleted and the radio returns to the main screen for Contacts. OR Select No to return to the main screen for Contacts. Removing a Contact from a Call List Procedure: Procedure: 1 < or > to Cnts. 1 < or > to Cnts. 2 Press the Menu Select button directly below Cnts. The 2 Press the Menu Select button directly below Cnts. The entries are alphabetically sorted. 3 U or D to the entry you want to add to a call list and press the Menu Select button directly below Optn. 4 U or D to Add to CallLst and press the Menu Select button directly below Sel. 5 U or D to the required Call List and press the Menu Select button directly below Add. OR U or D to Cncl to return to the main display for Contacts. 6 The display momentarily shows Please wait before showing added to Call List, confirming the addition of the contact to the list. 7 The radio returns to the main display for Contacts. entries are alphabetically sorted. 3 U or D to the entry you want to remove from a call list and press the Menu Select button directly below Optn. 4 U or D to Rm frm CallLst and press the Menu Select button directly below Sel. 5 The display shows Remove frm Call List?. 6 Press the Menu Select button directly below Yes to remove Advanced Features Adding a Contact to a Call List the entry from the Call List. OR Press the Menu Select button directly below No to return to the main display for Contacts. 7 The display momentarily shows Please wait before showing removed from Call List, confirming the removal of the contact from the list. 8 The radio returns to the main display for Contacts. 51 English Editing a Contact in a Call List Editing an Entry Alias Procedure: 1 < or > to Cnts. 2 Press the Menu Select button directly below Cnts. The entries are alphabetically sorted. 3 U or D to the entry you want to edit and press the Menu Select button directly below Optn. 4 U or D to Edit and press the Menu Select button directly Advanced Features below Sel. 5 U or D to the entry alias you wish to change and press the Menu Select button directly below Edit. 6 A blinking cursor appears. Use the keypad to edit the name. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. 52 English 7 Press the Menu Select button directly below Ok once you have finished. The display returns to the Edit Contact screen. 8 Press the Menu Select button directly below Done to save your changes and return to the main screen for Contacts. Editing as Entry ID Procedure: 1 < or > to Cnts. 2 Press the Menu Select button directly below Cnts. The entries are alphabetically sorted. 3 U or D to the entry you want to edit and press the Menu Select button directly below Optn. 4 U or D to Edit and press the Menu Select button directly below Sel. 5 U or D to the entry ID you wish to change and press the Menu Select button directly below Edit. 6 A blinking cursor appears. 4 U or D to Edit and press the Menu Select button directly below Sel. 5 U or D to Type and press the Menu Select button directly below Edit. 6 U or D to choose from the list of call types given and press the Menu Select button directly below Ok to select. 7 The display returns to the Edit Contact screen. 8 Press the Menu Select button directly below Done to save your changes and return to the main screen for Contacts. 7 Press the Menu Select button directly below Ok once you have finished. The display returns to the Edit Contact screen. 8 Press the Menu Select button directly below Done to save your changes and return to the main screen for Contacts. Editing a Call Type Procedure: 1 < or > to Cnts. 2 Press the Menu Select button directly below Cnts. The entries are alphabetically sorted. 3 U or D to the entry you want to edit and press the Menu Select button directly below Optn. Viewing Details of a Contact Advanced Features Use the keypad to edit the name. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. Procedure: 1 < or > to Cnts. 2 Press the Menu Select button directly below Cnts. The entries are alphabetically sorted. 3 U or D to the entry you want to view and press the Menu Select button directly below Optn. 4 U or D to View and press the Menu Select button directly below Sel. 5 The display shows all the numbers associated with the entry. 53 English Scan Lists Scan lists are created and assigned to individual channels/ groups. Your radio scans for voice activity by cycling through the channel/group sequence specified in the scan list for the current channel/group. Your radio supports different types of Scan Lists: • Trunking Priority Monitor Scan List • Conventional Scan List Advanced Features • Talkgroup Scan List A maximum of 200 Scan Lists can be programmed in your radio. These lists must be preprogrammed by a qualified radio technician. Viewing a Scan List Procedure: 1 < or > to ScnL. 2 Press the Menu Select button directly below ScnL. 3 U or D to view the members on the list. 4 Press H to exit the current display and return to the Home screen. Editing the Scan List This feature lets you change scan list members and priorities. Procedure: Long press the preprogrammed Scan List Programming button (side button) and proceed to Step 3. OR Move the preprogrammed Scan List Programming switch to programming position and proceed to Step 3. OR Follow the procedure below. 1 < or > to ScnL. 2 Press the Menu Select button directly below ScnL. The display shows the lists that can be changed. 3 U or D to the entry you want to edit. 4 Press the Menu Select button directly below Sel to add and/ or change the priority of the currently displayed channel in the scan list. OR Press the Menu Select button directly below Del to delete the currently displayed channel from the scan list. OR Press the Menu Select button directly below Rcl to view the next member of the scan list. 5 U or D to select more channels to be added or deleted. 54 English OR 6 Move the Scan List Programming switch out of programming position. OR Press H to exit scan list programming and return to the Home screen. See Viewing and Changing the Priority Status on page 56 for more information on how to add and/or change the priority of the currently displayed channel in the scan list. Changing the Scan List Status Procedure: 1 Long press the preprogrammed Scan List Programming button (side button). OR Move the preprogrammed Scan List Programming switch to programming position. 2 The display shows the programming mode icon and the first list member. 3 U or D to the number you want to edit. 4 Press the Select button once to add the currently displayed channel to the scan list. OR Press the Select button one or more times to change the scan list status icon of the currently displayed channel. Advanced Features Use the keypad to go directly to additional channels to be added or deleted. OR Use the 16-Position Select knob to select additional channels to be added or deleted. 5 U or D to select more list members whose scan status you want to change. OR Use the keypad to go directly to that scan list member. OR Use the 16-Position Select knob to select another scan list member. 6 Move the Scan List Programming switch out of programming position. 55 English Viewing and Changing the Priority Status Procedure: 1 Below the Sel, Del, and Rcl screen, press the Menu Select button directly below Sel to view and/or change the priority status of the currently displayed channel. OR Below the Sel, Del, and Rcl screen, press the Select button one or more times to view and/or change the scan list status icon of the currently displayed channel. Advanced Features 2 A Scan icon indicates that the current channel is in the scan list as a non-priority channel. The LED lights up solid green. OR A Priority-Two Channel Scan icon indicates that the current channel is in the scan list as the Priority-Two channel. The LED blinks green. OR A Priority-One Channel Scan icon indicates that the current channel is in the scan list as the Priority-One channel. The LED rapidly blinks green. You hear all traffic on the PriorityOne channel, regardless of traffic on non-priority channels. OR No icon indicates that the current channel is deleted from the scan list. 56 English Scan This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of channels. Turning Scan On or Off Procedure: Press the preprogrammed Scan button, or turn the preprogrammed Scan switch to the Scan on or Scan off position, to start or stop scan. OR Follow the procedure below. 1 < or > to Scan. 2 Press the Menu Select button directly below Scan. 3 The display shows Scan off if scan is disabled. Press the Menu Select button directly below Scan to enable scan. OR The display shows Scan on and the scan status icon if scan is enabled. Press the Menu Select button directly below Scan to disable scan. 4 The radio returns to the Home screen. Making a Dynamic Priority Change (Conventional Scan Only) This change remains in effect until scan is turned off. Scan then reverts to the preprogrammed (original) setting. Procedure: 1 When the radio locks onto the channel designated as the new Priority-Two channel, press the preprogrammed Dynamic Priority button. 2 The radio continues scanning the remaining channels in the list. Deleting a Nuisance Channel If a channel continually generates unwanted calls or noise (termed a “nuisance” channel), you can temporarily remove the unwanted channel from the scan list. 2 The radio continues scanning the remaining channels in the list. Restoring a Nuisance Channel Procedure: To restore the deleted nuisance channel, do one of the following: • Turn the radio off and then turning it on again. OR Advanced Features While the radio is scanning, the dynamic priority change feature allows you to temporarily change any channel in a scan list (except for the Priority-One channel) to the Priority-Two channel. OR < or > to Nuis. Press the Menu Select button directly below Nuis. • Stop and restart a scan via the preprogrammed Scan button or menu. OR • Change the channel via the 16-Position Select knob. This capability does not apply to priority channels or the designated transmit channel. Procedure: 1 When the radio is locked onto the channel to be deleted, press the preprogrammed Nuisance Delete button. 57 English Call Alert Paging This feature allows your radio to work like a pager. Even if other users are away from their radios, or if they are unable to hear their radios, you can send them an individual Call Alert page. You can also verify if a radio is active on the system. Depending on how your radio is programmed, when you make an Enhanced Private Call, the radio either automatically sends a call alert page if there is no answer after the maximum ring time, OR when you press the PTT button. Advanced Features Note: This feature must be preprogrammed by a qualified radio technician. Receiving a Call Alert Page Procedure: 1 When you receive a Call Alert page, you hear four repeating alert tones and the LED blinks green. 2 The call received icons blinks and the display shows Page received. Press any button to clear the Call Alert page. See Making a Talkgroup Call on page 38 or Making a Private Call (Trunking Only) on page 38 for more information on returning the call. 58 English Sending a Call Alert Page Note: The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Procedure: Press the preprogrammed Quick Access (One-Touch) Call Alert Paging button to send a page to the preprogrammed ID and proceed to Step 5. OR Follow the procedure below. 1 < or > to Page. 2 Press the Menu Select button directly below Page. 3 Press Cnts to scroll through and select the required ID. OR U or D to the required ID. OR Use the keypad to enter the required ID. 4 Press the PTT button to send the page. 5 The display shows Paging... . 6 If the call alert page is sent successfully, a tone sounds and 7 The radio returns to the Home screen. OR Press the Menu Select button directly below Ok to return to the main screen for Contacts. OR Follow the procedure below. 1 < or > to Call. 2 Press the Menu Select button directly below Call. 3 U or D to select the alias or ID, and press the PTT button to 5 Press the Menu Select button directly below Yes to send the call alert page. OR Press the Menu Select button directly below No to exit the screen without sending the call alert page. 6 The display shows Paging... . 7 If the call alert page is sent successfully, a tone sounds and the display shows Ack received. OR If the call alert page is not acknowledged, a low tone sounds and the display shows No acknowledge. 8 The radio returns to the Home screen. OR Press the Menu Select button directly below Ok to return to the main screen for Contacts. Advanced Features the display shows Ack received. OR If the call alert page is not acknowledged, a low tone sounds and the display shows No acknowledge. initiate the call. 4 If the target radio does not respond after a preprogrammed period of time, the display shows Send page?. 59 English Emergency Operation The Emergency feature is used to indicate a critical situation. If the Top (Orange) button is preprogrammed to send an emergency signal, this signal overrides any other communication over the selected channel. Your radio supports the following Emergency modes: • Emergency Alarm • Emergency Call (Trunking Only) • Emergency Alarm with Emergency Call Advanced Features • Silent Emergency Alarm Check with your dealer or system administrator for more information on the programming of this feature. Only one of the Emergency modes above can be assigned to the preprogrammed Emergency button. Note: 60 English To exit emergency at any time, press and hold the preprogrammed Emergency button for about a second. Sending an Emergency Alarm This feature allows you to send a data transmission, which identifies the radio sending the emergency, to the dispatcher. Procedure: 1 Press the preprogrammed Emergency button. 2 The display shows Emergency and the current zone or channel. A short, medium-pitched tone sounds and the LED rapidly blinks red. OR The radio sounds a short low-pitched tone to indicate the selected channel does not support emergency and rejects to launch emergency mode. The display shows No emergency, if the selected channel does not support emergency. 3 When you receive the dispatcher’s acknowledgment, the display shows Ack received. Four tones sound, the alarm ends, and the radio exits the Emergency Alarm mode. OR If no acknowledgement is received, the display shows No acknowledge. The alarm ends and the radio exits the Emergency Alarm mode. Sending an Emergency Call (Trunking Only) Note: The radio operates in the normal dispatch manner while in Emergency Call, except, if enabled, it returns to one of the following: • Tactical/Non-Revert – You talk on the channel you selected before you entered the emergency state. • Non-Tactical/Revert – You talk on a preprogrammed emergency channel. The emergency alarm is sent on this same channel. Procedure: 1 Press the preprogrammed Emergency button. 2 The display shows Emergency and the current zone or channel. A short, medium-pitched tone sounds and the LED rapidly blinks red. OR The display shows No emergency, if the selected channel does not support emergency. 3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 4 Press and hold the PTT button. Speak clearly into the microphone. about a second to exit the Emergency Call mode. Sending an Emergency Alarm with Emergency Call Procedure: 1 Press the preprogrammed Emergency button. 2 The display shows Emergency and the current zone or channel. A short, medium-pitched tone sounds and the LED rapidly blinks red. OR The display shows No emergency, if the selected channel does not support emergency. Advanced Features This feature gives your radio priority access on a channel. 6 Press and hold the preprogrammed Emergency button for 3 The radio enters the Emergency Call state when: You receive the dispatcher’s acknowledgment. The display shows Ack received. OR You receive no acknowledgement. The display shows No acknowledge. OR You press the PTT button while in the Emergency Alarm mode. 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 5 Release the PTT button to end the transmission and wait for a response from the dispatcher. 61 English 5 Press and hold the PTT button. Speak clearly into the Note: microphone. • If the new channel is also preprogrammed for Emergency, you can change channels while in Emergency operation. The emergency alarm or call continues on the new channel. 6 Release the PTT button to end the transmission and wait for a response from the dispatcher. 7 Press and hold the preprogrammed Emergency button for • If the new channel is NOT preprogrammed for about a second to exit the Emergency Call mode. Emergency, the display shows No emergency, and you hear an invalid tone until you exit the Emergency state or change to a channel preprogrammed for Emergency. Sending a Silent Emergency Alarm This feature allows you to send an Emergency Alarm to another radio without any audio or visual indicators. Procedure: Advanced Features 1 Press the preprogrammed Emergency button. 2 The display shows no changes, the LED does not light up, and you hear no tones. For ALL Emergency signals, when changing channels: Using the Emergency Keep-Alive Feature This feature, when enabled, prevents the radio from being turned off via the On/Off Control knob when the radio is in the Emergency state. Note: The radio only exits the Emergency state using one of the ways mentioned in the previous sections. 3 The silent emergency state continues until you: Press and hold the preprogrammed Emergency button for about a second to exit the Silent Emergency Alarm mode. OR Press and release the PTT button to exit the Silent Emergency Alarm mode and enter regular dispatch or Emergency Call mode. 62 English See Sending an Emergency Alarm on page 60, Sending an Emergency Call (Trunking Only) on page 61, Sending an Emergency Alarm with Emergency Call on page 61, or Sending a Silent Emergency Alarm on page 62. Advanced Automatic Registration Service (ARS) Data applications within the fixed network can determine the presence of a device on the system and send data to the device. For example: Text Messaging Service (TMS). The Automatic Registration Service for the radio consists of two (2) modes: • ARS Server Mode (default mode) • ARS Non-Server Mode Note: The default ARS mode can be changed by a qualified radio technician using the radio’s programming software. Procedure: Turn the preprogrammed 16-Position Select knob, once the zone you want is displayed, to the desired mode. OR Follow the procedure below. 1 < or > to Chan. 2 Press the Menu Select button directly below Chan. The display shows the current channel name. 3 U or D to the required channel or mode. 4 In ARS Server Mode, the display shows the User Login Advanced Features This feature provides an automated data application registration for the radio. When you turn on the radio, the device automatically registers with the server. Selecting or Changing the ARS Mode Indicator icon, the zone, and ARS server channel. OR In ARS Non-Server Mode, the display shows the User Login Indicator icon, the zone, and ARS non-server channel. OR If the channel or mode selected is unprogrammed, the display shows Unprogrammed. Repeat Step 3. 5 Press Sel to confirm the displayed channel. 63 English Accessing the User Login Feature Logging In as a User This feature allows you as the user to be associated with the radio. With this association, every data application (Example: Text Messaging Service) takes on a friendly username. Procedure: Press the preprogrammed User Login button and proceed to Step 3. OR Follow the procedure below. You can still send text messages without logging in as a user. The user login feature only enables the recipient of your message to identify you as the sender by assigning a username to your message. Advanced Features Note: 64 English Valid characters for a username entry are capital letters (A – Z), small letters (a – z), numbers (0 – 9), symbols (*, -, #, /), and the space character. The maximum length for a username is eight (8) characters. Usernames are not case sensitive in server mode but are case sensitive in non-server mode. A predefined username may sometimes be invalid because the programming software that is used to set predefined usernames allows you to set usernames comprising of eight (8) characters or more. 1 < or > to User. 2 Press the Menu Select button directly below User. 3 The display shows the User Login screen. 4 U or D to {ID Entry} and press the Menu Select button directly below Edit. A blinking cursor appears beside Id:. Use the keypad to enter a username. OR U or D to scroll through the list of predefined usernames. Press the Menu Select button directly below Logn to select the predefined username. OR Press and hold U or D to scroll through the list of predefined usernames at a fast scroll rate. Press the Menu Select button directly below Logn to select the predefined username. 5 If the selected predefined username has more than eight (8) OR Wait for the logged in confirmation screen. If the login process is successful, the display shows the successful user login indicator (IP indicator) icon and Logged in, with Logt and Exit. Logging Out 6 Press the Menu Select button directly below Logn. Once the data application registration is completed, you can log out. 7 In ARS Server Mode, the display shows the User Login Procedure: Indicator icon, the ID, and In progress, with Cncl. OR In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and Logged in, with Logt and Exit. OR In non-ARS enabled mode, the display shows Offline, with Logt and Exit. 8 If the username is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The display also momentary shows Login failed. Repeat Step 4. OR If the PIN is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The display also momentary shows Login failed. Repeat Step 6. OR Press the Menu Select button directly below Cncl to cancel the login in progress screen and return to the initial user login screen. 1 Press the Menu Select button directly below Logt. 2 The display shows the User Login Indicator icon and Clear Advanced Features characters, or an invalid character in it, the display momentary shows Invalid ID. Repeat Step 4. OR A blinking cursor appears beside PIN:. Use the keypad to enter your Personal Identification Number (PIN) number. The maximum PIN length is 4 digits. The PIN number appears as asterisks. private data?. 3 Select Yes to clear all your private data. The display momentary shows Private data cleared. OR Select No to keep your private data. Note: Private data refers to all messages in the text messaging inbox, Draft, and Sent folder. The next user is able to access the Inbox, Draft and Sent messages if private data is not deleted. 65 English Text Messaging Service (TMS) This feature allows you to send and receive text messages. The maximum length of characters for a text message is 200. There are three (3) types of text messages: • A new text message (free form message). • A predefined message (quick text message). Note: The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Press the Menu Select button directly below Back at any time to return to the previous screen. • Drafts Procedure: Press the preprogrammed Data Feature button or the TMS Feature button to access the TMS feature screen. OR Press and hold the preprogrammed Data Feature button or the TMS Feature button to access the Inbox. OR Follow the procedure below. • Sent 1 < or > to TMS. • An edited quick text message. The main menu consists of the following options: • Inbox Advanced Features Accessing the TMS Features • Compose Note: 66 English See Status Icons on page 20 for more information on the TMS icons and TMS Menu Options on page 25 for more information on each menu option. 2 Press the Menu Select button directly below TMS to access the TMS feature screen. 3 U or D to scroll through the main menu options. Composing and Sending a New Text Message During the uppercase and lowercase mode, multitapping the keys only scrolls through the letters. For example, A->B->C, a->b->c. During the numeric mode, except for 1, pressing the keypad only enters the numeric digits. Subsequent presses of the same key inserts the same digit to the text message (no multi-tap). Procedure: 1 < or > to TMS. 2 Press the Menu Select button directly below TMS to access the TMS feature screen. 3 U or D to Compose and press the Menu Select button directly below Sel. OR Press the Menu Select button directly below Exit to return to the Home screen. 4 U or D to Text Message and press the Menu Select button directly below Sel to compose a new message. Use the keypad to type or edit your message. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. 6 Press the Menu Select button directly below Optn once the message is composed. 7 U or D to Send Message and press the Menu Select Advanced Features Note: 5 A blinking cursor appears on the Compose screen. button directly below Sel. 8 U or D to scroll through the address list and highlight the required address. OR U or D to {Other Recpnt} and press the Menu Select button below Edit. A blinking cursor appears on the Enter Address screen. Use the keypad to type the address entry. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. 67 English Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. 9 Press the Menu Select button below Send or the PTT button to send the message. 10 The display shows the Send Message screen and Sending msg. 11 If the message is sent, a tone sounds and the display shows Advanced Features Msg sent. OR If the message is not sent, a low tone sounds and the display shows Send failed. If the message fails to send, the radio returns you to the main TMS screen. Note: 68 English You can append a priority status and/or a request reply to your message. See Using the Priority Status and Request Reply Features on page 70 for more information. You can also select the Save to Drafts option to save your message in the Drafts folder to send it at a later time. See Accessing the Drafts Folder on page 74 for more information. Sending a Quick Text Message Quick Text messages are messages that are predefined and usually consist of messages that are used most frequently. Each Quick Text message has a maximum length of 50 characters. Procedure: Press the preprogrammed Quick Text button and proceed to Step 4. OR Follow the procedure below. 1 < or > to TMS. 2 Press the Menu Select button directly below TMS to access the TMS feature screen. 3 U or D to Compose and press the Menu Select button directly below Sel. OR Press the Menu Select button directly below Exit to return to the Home screen. 4 U or D to Quick Text and press the Menu Select button directly below Sel for a predefined message. 5 U or D to scroll through the list of messages and press the Menu Select button directly below Sel to select the required message. 6 The message appears on the Compose screen, with a 7 Press the Menu Select button directly below Optn. 8 U or D to Send Message and press the Menu Select Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. 10 Press the Menu Select button below Send or the PTT button to send the message. 11 The display shows the Send Message screen and Sending msg. 12 If the message is sent, a tone sounds and the display shows Msg sent. OR If the message is not sent, a low tone sounds and the display shows Send failed. Advanced Features blinking cursor at the end of it. Use the keypad to edit the message, if required. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. button directly below Sel. 9 U or D to scroll through the address list and highlight the required address. OR U or D to {Other Recpnt} and press the Menu Select button below Edit. A blinking cursor appears on the Enter Address screen. Use the keypad to type the address entry. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. If the message fails to send, the radio returns you to the main TMS screen. Note: You can append a priority status and/or a request reply to your message. See Using the Priority Status and Request Reply Features on page 70 for more information. 69 English Using the Priority Status and Request Reply Features Before sending your message, you can append a priority status and/or a request reply to your message. Appending a Priority Status to a Text Message Note: The Priority Status icon on a message does not imply that the message gets higher priority over the other messages when it is being transmitted. It is just an indication that can be embedded into a message to let the receiver know that the message is important. Advanced Features Procedure: After the outgoing message is composed (see Composing and Sending a New Text Message on page 67 for more information): 1 Press the Menu Select button directly below Optn. 2 U or D to Mark Important and press the Menu Select button directly below Sel to indicate the message as important. 3 The priority status icon appears beside the normal message icon on the label bar. Removing a Priority Status from a Text Message Procedure: After the outgoing message is composed (see Composing and Sending a New Text Message on page 67 for more information): 1 Press the Menu Select button directly below Optn. 2 U or D to Mark as Normal and press the Menu Select button directly below Sel to remove the priority status from the message. 3 The display shows the normal message icon on the label bar. Appending a Request Reply to a Text Message Procedure: After the outgoing message is composed (see Composing and Sending a New Text Message on page 67 for more information): 1 Press the Menu Select button directly below Optn. 2 U or D to Req Reply and press the Menu Select button directly below Sel to request for a reply. 3 The request reply icon appears beside the normal message icon on the label bar. 70 English Removing a Request Reply from a Text Message After the outgoing message is composed (see Composing and Sending a New Text Message on page 67 for more information): 1 Press the Menu Select button directly below Optn. 2 U or D to No Req Reply and press the Menu Select button directly below Sel to remove the priority status from the message. 3 The display shows the normal message icon on the label bar. Appending a Priority Status and a Reply Request to a Text Message Procedure: After the outgoing message is composed (see Composing and Sending a New Text Message on page 67 for more information): 1 Press the Menu Select button directly below Optn. button directly below Sel to indicate the message as important. AND U or D to Req Reply and press the Menu Select button directly below Sel to request for a reply. 3 The priority status and request reply icons appear beside the normal message icon on the label bar. Removing a Priority Status and a Reply Request from a Text Message Procedure: Advanced Features Procedure: 2 U or D to Mark Important and press the Menu Select After the outgoing message is composed (see Composing and Sending a New Text Message on page 67 for more information): 1 Press the Menu Select button directly below Optn. 2 U or D to Mark as Normal and press the Menu Select button directly below Sel to indicate the message as important. AND U or D to No Req Reply and press the Menu Select button directly below Sel to request for a reply. 3 The display shows the normal message icon on the label bar. 71 English Managing Text Messages Viewing a Text Message from the Inbox Receiving a Text Message The Inbox can hold up to thirty (30) messages. Advanced Features Note: When you receive a message that is flagged with the “Request Reply” icon, you must manually respond to the sender that you have received the message. The system will not automatically send back a notification that the radio has received such message. Note: U or D to read the message if fills more than one screen. Procedure: When you receive a message, press and hold the preprogrammed Data Feature button or the TMS Feature button to access the Inbox and go to Step 3. OR Follow the procedure below. Procedure: Press the preprogrammed Data Feature button or the TMS Feature button to access the TMS feature screen, and proceed to Step 3. OR Press and hold the preprogrammed Data Feature button or the TMS Feature button to access the Inbox and proceed to Step 4. OR Follow the procedure below. 1 The new message icon appears and the display 1 < or > to TMS. momentarily shows New msg. 2 Press the Menu Select button directly below TMS to access the Inbox. 3 The display shows a list of aliases or IDs, with the sender of the latest received message on top. 72 English 2 Press the Menu Select button directly below TMS to access the TMS feature screen. 3 U or D to Inbox and press the Menu Select button below Sel. 4 The display shows a list of aliases or IDs, with the sender of the latest received message on top. Select button below Sel to view the message. While on the view message screen, press the Menu Select button directly below Optn, Del, or Back to access the option. • Select Optn to configure the message settings. • Select Del to delete the message. • Select Back to return to the previous screen. Note: The icon at the top right corner of the screen indicates the status of the message. See Text Messaging Service (TMS) Icons on page 23 for more information. Replying to a Received Text Message Note: The original date and time stamp, address and message content is automatically appended to the reply message. Procedure: 1 U or D to the required aliases or ID and press the Menu Select button below Sel to view the message. 2 Press the Menu Select button directly below Rply to reply to a message. button directly below Sel. OR U or D to Quick Text and press the Menu Select button directly below Sel for a predefined message. OR U or D to scroll through the list of messages and press the Menu Select button directly below Sel to select the required message. 4 A blinking cursor appears on the Compose screen. OR The predefined message appears on the Compose screen, with a blinking cursor at the end of it. Advanced Features 5 U or D to the required aliases or ID and press the Menu 3 U or D to Text Message and press the Menu Select 5 Use the keypad to type or edit your message. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. 6 Press the Menu Select button directly below Optn once you have finished writing the message. 7 U or D to Send Message and press the Menu Select button directly below Sel to send the message. 73 English 8 The display shows the Send Message screen and Sending msg. Press the Menu Select button directly below Back at any time to return to the previous screen. • Select Edit to edit the message before sending it. Note: • Select Back to return to the previous screen. You can append a priority status and/or a request reply to your message. See Using the Priority Status and Request Reply Features on page 70 for more information. Advanced Features Accessing the Drafts Folder This folder stores the messages that were saved previously. The Drafts folder can hold up to 10 messages. The oldest draft in the folder is deleted when the 11th message comes in. • Select Del to delete the message. Managing Sent Text Messages Once a message is sent to another radio, it is saved in the Sent folder. The most recent sent text message is always added to the top of the Sent list. The Sent folder is capable of storing a maximum of ten (10) last sent messages. When the folder is full, the oldest message in the folder is deleted when the 11th message comes in. Procedure: 1 < or > to TMS. 2 Press the Menu Select button directly below TMS to access the TMS feature screen. 3 U or D to Drafts and press the Menu Select button below Sel. 4 The display shows a list of drafts, with the latest text message drafted on top. 5 U or D to the required text message press the Menu Select 74 Press the Menu Select button directly below Edit, Del., or Back to access the option. button below Sel to view the message. English Viewing a Sent Text Message Procedure: Press the preprogrammed Data Feature button or the TMS Feature button to access the TMS feature screen, and proceed to Step 3. OR Follow the procedure below. 1 < or > to TMS. 2 Press the Menu Select button directly below TMS to access the TMS feature screen. Sel. 4 The display shows a list of aliases or IDs, with the recipient of latest sent message on top. 5 U or D to the required aliases or ID and press the Menu Select button below Sel to view the message. While on the view message screen, press the Menu Select button directly below Optn, Del, or Back to access the option. • Select Optn to configure the message settings. • Select Del to delete the message. • Select Back to return to the previous screen. Note: The icon at the top right corner of the screen indicates the status of the message. See Text Messaging Service (TMS) Icons on page 23 for more information. Procedure: 1 Press the Menu Select button directly below Optn while viewing the message. 2 U or D to Send Message and press the Menu Select button directly below Sel. 3 U or D to scroll through the address list and highlight the required address. OR U or D to {Other Recpnt} and press the Menu Select button below Edit. A blinking cursor appears on the Enter Address screen. Use the keypad to type the address entry. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. Advanced Features 3 U or D to Sent and press the Menu Select button below Sending a Sent Text Message 75 English 4 Press the Menu Select button below Send or the PTT button to send the message. 5 The display shows the Send Message screen and Sending msg. Press the Menu Select button directly below Back at any time to return to the previous screen. Note: You can append a priority status and/or a request reply to your message. See Using the Priority Status and Request Reply Features on page 70 for more information. Advanced Features Deleting a Text Message Procedure: Deleting All Text Messages Procedure: Press the preprogrammed Data Feature button or the TMS Feature button to access the TMS feature screen, and proceed to Step 3. OR Follow the procedure below. 1 < or > to TMS. 2 Press the Menu Select button directly below TMS to access the TMS feature screen. 3 U or D to Inbox or Sent then press the Menu Select button below Clr to select all messages in the selected folder. From the Inbox, Draft, or Sent screen: 4 The display shows Del All?. 1 U or D to scroll through the messages. 5 Press the Menu Select button directly below Yes to delete 2 Press the Menu Select button directly below Del to delete the current message. 76 English all the messages in the selected folder. OR Press the Menu Select button directly below No to return to the main TMS screen. Secure Operations Unlike other forms of security, Motorola digital encryption provides signaling that makes it virtually impossible for others to decode any part of an encrypted message. Procedure: Turn the preprogrammed Secure/Clear switch to the clear position. Note: Selecting Secure Transmissions If the selected channel is preprogrammed for secureonly operation – when you press the PTT button, an invalid mode tone sounds and the display shows Secure TX only. The radio will not transmit until you set the Secure/ Clear switch to the secure position. Procedure: Turn the preprogrammed Secure/Clear switch to the secure position. Managing Encryption Note: Loading an Encryption Key If the selected channel is preprogrammed for clear-only operation – when you press the PTT button, an invalid mode tone sounds and the display shows Clear TX only. The radio will not transmit until you set the Secure/ Clear switch to the clear position. Note: Advanced Features Secure radio operation provides the highest commercially available level of voice security on both trunked and conventional channels. Selecting Clear Transmissions Refer to the key-variable loader (KVL) manual for equipment connections and setup. Procedure: 1 Attach the KVL to your radio. 2 The display shows Keyloading, and all other radio functions, except for power down, backlight, and volume, are locked out. 77 English 3 Select the required keys and press the Menu Select button directly below LOAD on the KVL. This loads the encryption keys into your radio. 4 When the key has been loaded successfully, the radio sounds a short tone for single-key radios. OR When the key has been loaded successfully, the radio sounds an alternating tone for multikey radios. Using the Multikey Feature This feature allows the radio to be equipped with different encryption keys and supports the DES-OFB algorithm. Advanced Features There are two types: 78 • Conventional Multikey – The encryption keys can be tied (strapped), on a one-per-channel basis, through Customer Programming Software. In addition, you can have operatorselectable keys, operator-selectable keysets, and operatorselectable key erasure. If talkgroups are enabled in conventional, then the encryption keys are strapped to the talkgroups. • Trunked Multikey – If you use your radio for both conventional and trunked applications, you have to strap your encryption keys for trunking on a per-talkgroup or announcement-group basis. In addition, you may strap a different key to other features, such as dynamic regrouping, failsoft, or emergency talkgroup. You can have operatorselectable key erasure. English Selecting an Encryption Key Procedure: 1 < or > to Key. 2 Press the Menu Select button directly below Key. The display shows the last user-selected and stored encryption key, and the available menu selections. 3 U or D to scroll through the encryption keys. OR Use the keypad to enter the number of the desired key. 4 Press the Menu Select button directly below Sel to save the newly selected key and return to the Home screen. OR Press H, the PTT button, or the Menu Select button directly below Exit to exit. OR Turn the 16-Position Select knob to exit. Note: If the selected key is erased, a momentary keyfail tone sounds and the display shows Key fail. OR If the selected key is not allowed, a momentary illegal key tone sounds and the display shows Illegal key. Selecting a Keyset For example, you could have a group of three keys structured to one keyset, and another group of three different keys structured to another keyset; by changing keysets, you would automatically switch from one set of keys to the other. Every channel to which one of the original keys was tied now has the equivalent new key instead. Note: Press H, the PTT button, or the Exit menu selection, or turn the 16-Position Select knob to exit this menu at any time without changing the keyset selection. Procedure: 1 < or > to KSet. 2 Press the Menu Select button directly below KSet. The display shows the last user-selected and stored keyset, and the available keyset menu selections. 3 U or D to scroll through the keysets. OR Use the keypad to enter the number of the desired keyset. newly selected keyset. 5 The radio exits keyset selection and returns to the Home screen. Erasing the Selected Encryption Keys This feature allows you to erase all or selected encryption keys. Procedure: 1 < or > to Eras. 2 Press the Menu Select button directly below Eras. The display shows the last user-selected and stored encryption key, and the available menu selections. Advanced Features This feature allows you to select one or more groups of several encryption keys from among the available keys stored in the radio. 4 Press the Menu Select button directly below Sel to save the 3 U or D to the desired encryption key. OR Use the keypad to enter the number of the desired key. 4 Press the Menu Select button directly below Optn. The display shows the available key erase options. 5 U or D to the required option and press the Menu Select button directly below Sel. 6 At Erase all keys?, press the Menu Select button directly below Yes to erase all the encryption keys in the radio OR No to return to the previous screen. OR 79 English At Erase single key?, press the Menu Select button directly below Yes to erase the displayed encryption key OR No to return to the previous screen. 7 Press H, the PTT button, or the Menu Select button directly below Exit to exit. OR Turn the 16-Position Select knob to exit. Requesting an Over-the-Air Rekey (ASTRO Conventional Only) This feature, also known as OTAR, allows the dispatcher to reprogram the encryption keys in the radio remotely. The dispatcher performs the rekey operation upon receiving a rekey request from the user. Procedure: OR Advanced Features Use the preprogrammed Top Side (Select) button and Top (Orange) button to erase the single key in radios with the single-key option, and to erase all keys in radios with the multikey option. 1 Press and hold the Top Side (Select) button. 2 While holding Top Side (Select) button down, press the Top (Orange) button. 1 < or > to Reky. 2 Press the Menu Select button directly below Reky. 3 Press the PTT button to send the rekey request. OR Press the PTT button again, or the Home or Emergency button, to exit the feature and transmit in normal mode. 4 If the rekey operation fails, a bad-key tone sounds and the display shows Rekey fail. 3 The display shows Please wait. 4 When all the encryption keys have been erased, the display shows All keys erased. Note: 80 English DO NOT press the Top (Orange) button before pressing the Top Side (Select) button, unless you are in an emergency situation as this sends an emergency alarm. Note: The rekey operation failure indicates that your radio does not contain the Unique Shadow Key (USK). This key must be loaded into the radio with the key-variable loader (KVL) before the rekey request can be sent. Refer to your local key management supervisor for more information. Hear Clear This feature allows to view or define MDC Over-the-Air Rekeying (OTAR) features.It is applied only when operating in secure encrypted mode and only for conventional communications. In additional to Rekey Requests, OTAR transmissions include Delayed Acknowledgements, and Powerup Acknowledgements. There are two components of Hear Clear. Some of the options selected may also need to be set up at the Key Management Controller (KMC) site to work properly. Note: This feature must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information. 1 Companding: Reduces the channel noise, e.g. OTA transmission, that is predominantly present in UHF2 and 900 MHz channel with the following features. • Compressor – reduces the background noise flow and the speech signal at transmitting radio. • Expander – expands the speech while the noise flow remains the same at receiving radio. 2 Random FM Noise Canceller (Flutter Fighter): Reduces the unwanted effects of random FM noise pulses caused by channel fading under high Signal-to-Noise (S/N) conditions such as in a moving in a transportation. The fading effects, heard as audio pops and clicks, are cancelled without affecting the desired audio signal. Advanced Features MDC Over-the-Air Rekeying (OTAR) Page The Random FM Noise Canceller operates only in receive mode. Note: This feature must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information. 81 English Security Radio Lock This feature changes your radio to a more robust security system that protects the use of the secure encryption keys. If this feature is enabled in your radio by a qualified radio technician, when you turn the radio on, the display shows Radio locked. Unlocking Your Radio Advanced Features Procedure: 1 Enter your numeric password. Secure-equipped radios – 6 to 8 characters. Clear radios – 0 to 8 characters. 2 Press the Menu Select button directly below Sel to enter the code. OR Press the Menu Select button directly below Del to delete any unwanted characters. OR Press the Menu Select button directly below Cncl to exit the feature. 82 English 3 If the password is correct, the radio unlocks. OR If the password is incorrect, the display show Incorrect password and the radio remains locked. If you enter three incorrect passwords in a row, the display shows Deadlock. Turn the radio off and then on, and begin again at Step 1. IMPORTANT: For Secure Radios Only – After a total of 17 consecutive incorrect passwords (turning the radio off and on does not reset this number), the radio erases all of its encryption keys and shows Deadlock. See a qualified radio technician. If you forget the password, enter ******** to erase all keys and revert the password in the radio back to the default password of 01234567. Changing Your Password Procedure: 1 < or > to Pswd. 2 Press the Menu Select button directly below Pswd. 3 Enter the old password. 4 Press the Menu Select button directly below Ok. 5 Enter the new password. 6 Press the Menu Select button directly below Sel. 8 Press the Menu Select button directly below Sel. The password is updated. OR If the two passwords do not match, repeat Steps 5 through 8. Note: If you enter three incorrect old passwords, the radio exits the password feature. You cannot access this feature again until you turn the radio off and on. Enabling or Disabling the Radio Lock Feature (Secure Radios Only) This feature allows you to enable or disable the radio lock feature. It is programmable by a qualified radio technician. Procedure: 1 < or > to Logf. 2 Press the Menu Select button directly below Logf. 3 Display shows Pswd enabled, indicating that the radio lock feature is enabled. OR Display shows Pswd disabled, indicating that the radio lock feature is disabled. This feature uses information from the Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your radio, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) varies depending on the environment in which you are using the GPS feature. For example, GPS location fixes are very difficult to obtain indoors, in covered locations, between high buildings, or in situations where you have not established a clear broad view of the sky. Advanced Features 7 Re-enter the new password. The Global Positioning System (GPS) Understanding the GPS Feature The GPS technology uses radio signals from earth orbiting satellites, to establish the location coordinates, maximizing your view of clear unobstructed sky is essential for optimum performance. Where adequate signals from multiple satellites are not available (usually because you cannot establish a view of a wide area of the sky), the GPS feature of your radio will not work. Such situations include but are not limited to: • In underground locations • Inside of buildings, trains, or other covered vehicles 83 English • Under any other metal or concrete roof or structure Enhancing GPS Performance • Between tall buildings or under dense tree-cover Sometimes, the GPS feature may be unable to complete a location calculation successfully. You then see a message indicating that your radio cannot connect to enough visible satellites. • In temperature extremes outside the operating limits of your radio Even where location information can be calculated in such situations, it may take longer to do so, and your location estimate may not be as accurate. Therefore, in any emergency situation, always report your location to your dispatcher. Advanced Features Note: Even where adequate signals from multiple satellites are available, your GPS feature only provides an approximate location, usually within 20 meters from your actual location, but sometimes further away. Keep in mind that the accuracy of the location information and the time it takes to obtain it varies depending upon circumstances, particularly the ability to receive signals from an adequate number of satellites. Note: 84 English The satellites used by the GPS feature are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense GPS user policy and the Federal Radio Navigation Plan. These changes may affect the performance of the GPS feature on your radio. To maximize the ability of your radio to determine a fix, please note the following guidelines: • For your initial fix, hold the radio in the face position. • Stay in the open. The GPS feature works best where there is nothing between your radio and a large amount of open sky. The Outdoor Location Feature (Using GPS) This feature allows you to determine your current location using a location menu, as well as your current distance and bearing in relation to another location. Radio location may be requested and reported over-the-air. Your radio stores up to a maximum of sixty (60) programmable location coordinates, also known as waypoints. When the memory is full, the next waypoints automatically replaces the oldest waypoints in the radio. The radio also stores four (4) preprogrammed waypoints. These coordinates cannot be deleted. Preprogrammed Waypoints Fixed location coordinates: • Home User-configurable location coordinates. • Emergency • Last Known Location • Destination Only the alias is editable, not the coordinates. The Home and Destination coordinates are editable. Coordinates can be deleted one at a time, or all at once. Coordinates cannot be deleted. Note: The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Note: An ON menu key may be present on the location menu if it is preprogrammed by the dealer or system administrator. Procedure: Press the preprogrammed GPS button to toggle the Outdoor Location feature on or off. OR Follow the procedure below. 1 < or > to Loc. 2 Press the Menu Select button directly below Loc. Advanced Features Programmable Waypoints Accessing the Outdoor Location Feature 3 The display shows Location off. 4 Press the Menu Select button directly below On to obtain a location fix. OR Press the Menu Select button directly below Optn. U or D to Turn On GPS and press the Menu Select button directly below Sel. 5 The front display shows the latitude, longitude, time and date of the last successful location fix. 85 English 6 Press the Menu Select button directly below Rfsh to obtain a new location fix. 7 The top line temporarily displays Please wait while the new location is being determined. While the new location is being determined, the location signal can be a solid or blinking icon. 8 Once the location coordinates are fixed, the display shows Advanced Features the current latitude and longitude, along with the UTC (Zulu) time and date that the location fix was obtained. The location coordinates are updated automatically every five seconds while the location signal is present. OR If the radio fails to get a location fix, the display shows No service and returns to the previous display. 9 Press the Menu Select button directly below Exit to exit the feature and return to the main screen. OR Press H, the PTT button, or the preprogrammed GPS button to return to the Home screen. The radio also exits the menu if the emergency button is pressed. 86 English Saving a Waypoint Procedure: While in the current location display: 1 Press the Menu Select button directly below Optn. 2 U or D to Save as Waypt and press the Menu Select button directly below Sel. OR U or D to Save as Home and press the Menu Select button directly below Sel. OR U or D to Save as Dest. and press the Menu Select button directly below Sel. 3 A blinking cursor appears in the Save As Waypt screen. Use the keypad to edit the auto-generated waypoint, if required. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. OR Press the Menu Select button directly below Cncl to return to the Location main screen. are done. 5 The display shows Current loc saved as . OR The display shows Current loc saved as {Home}. OR The display shows Current loc saved as {Destination}. 6 Press the Menu Select button directly below Exit to exit the feature and return to the main screen. OR Press H, the PTT button, or the preprogrammed GPS button to return to the Home screen. Procedure: While in the current location display: 1 Press the Menu Select button directly below Optn. 2 U or D to Waypoints and press the Menu Select button directly below Sel. 3 The display shows a list of waypoints. 4 U or D to scroll through the list. OR U or D to select a waypoint to view the location information in full. Advanced Features 4 Press the Menu Select button directly below Ok once you Viewing a Saved Waypoint 5 Press the Menu Select button directly below Optn. 6 U or D to View and press the Menu Select button directly below Sel to view the latitude, longitude, time and date of the selected waypoint. 7 Press the Menu Select button directly below Back to return to the previous screen. OR Press H, the PTT button, or the preprogrammed GPS button to return to the Home screen. 87 English Editing the Alias of a Waypoint Procedure: While in the current location display: 1 Press the Menu Select button directly below Optn. 2 U or D to Waypoints and press the Menu Select button directly below Sel. 3 The display shows a list of waypoints. 4 U or D to the required saved waypoint, and press the Menu Select button directly below Optn. 5 U or D to Edit name and press the Menu Select button Advanced Features directly below Sel. 6 A blinking cursor appears in the Edit Name screen. Use the keypad to edit the alias. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. 88 English 7 Press the Menu Select button directly below Ok once you are done. OR Press the Menu Select button directly below Cncl to return to the Waypoints main screen. 8 The display shows Updated and the radio returns to the Waypoints main screen. 9 Press the Menu Select button directly below Back to return to the previous screen. OR Press H, the PTT button, or the preprogrammed GPS button to return to the Home screen. Editing the Coordinates of a Waypoint Only the preprogrammed coordinates of Home and Destination are editable. Procedure: While in the current location display: 1 Press the Menu Select button directly below Optn. 2 U or D to Waypoints and press the Menu Select button directly below Sel. 3 The display shows a list of waypoints. 4 U or D to {Home} and press the Menu Select button directly below Optn. OR U or D to {Destination} and press the Menu Select button directly below Optn. 5 U or D to Edit Location and press the Menu Select button Press the Menu Select button directly below Del to delete any unwanted characters. 8 Press the Menu Select button directly below Ok once you are done. OR Press the Menu Select button directly below Cncl to return to the previous screen. 9 Press the Menu Select button directly below Ok once you are done with the new coordinates. Advanced Features Note: 7 A blinking cursor appears in the Edit Location screen. Press < to move one space to the left. Press > to move one space to the right. 10 The display shows {Home} Updated and the radio returns to the Waypoints main screen. OR The display shows {Destination} Updated and the radio returns to the Waypoints main screen. directly below Sel. 6 The first number blinks. Press < to move to the previous number/coordinates. Press > to move back to the next number/coordinates. Press the Menu Select button directly below Edit to change the number/coordinates. 89 English Deleting a Single Saved Waypoint Deleting All Saved Waypoints Procedure: While in the current location display: Procedure: While in the current location display: 1 Press the Menu Select button directly below Optn. 1 Press the Menu Select button directly below Optn. 2 U or D to Waypoints and press the Menu Select button 2 U or D to Waypoints and press the Menu Select button Advanced Features directly below Sel. directly below Sel. 3 The display shows a list of waypoints. 3 The display shows a list of waypoints. 4 U or D to the required saved waypoint, and press the Menu 4 U or D to a saved waypoint, and press the Menu Select Select button directly below Optn. U or D to Edit name and press the Menu Select button directly below Del. OR Press the Menu Select button directly below Del. 5 The display shows Delete Confirm?. 6 Press the Menu Select button directly below Yes to delete the waypoint. OR Press the Menu Select button directly below No to return to the Waypoints main screen. 7 The display momentarily shows deleted before the radio returns to the Waypoints main screen. 90 English button directly below Optn. 5 U or D to Delete All and press the Menu Select button directly below Sel. 6 The display shows Delete All saved waypnts Confirm?. 7 Press the Menu Select button directly below Yes to delete all waypoints. OR Press the Menu Select button directly below No to return to the Waypoints main screen. 8 The display momentarily shows All saved waypnts deleted before the radio returns to the Waypoints main screen. You cannot delete any of the preprogrammed waypoints. Measuring the Distance and Bearing from a Saved Waypoint 1 Press the Menu Select button directly below Optn. 2 U or D to Dist frm here and press the Menu Select button directly below Sel. 3 The display shows a list of waypoints. 4 U or D to the required waypoint, and press the Menu Select button directly below Sel. 5 The display shows the distance and bearing from the current to the selected coordinates. Mode When the Emergency feature is activated by pressing the emergency button, the radio exits the Location menu and returns to the Home (default) screen so that you can see which channel the emergency signal is going out on. However, you may re-enter the Location menu while still in emergency mode, provided that Silent Emergency has not been activated. If you have turned Location off using the ON/OFF menu key, it automatically turns back on when Emergency is activated. If there is a solid location signal during Emergency, the current location and the location information received is saved as Emergency and Last Known Location waypoints, respectively. Advanced Features Procedure: While in the current location display: Using the Location Feature While in Emergency 91 English Trunking System Controls Using the Failsoft System The failsoft system ensures continuous radio communications during a trunked system failure. If a trunking system fails completely, the radio goes into failsoft operation and automatically switches to its failsoft channel. Procedure: 1 During failsoft operation, your radio transmits and receives in conventional operation on a predetermined frequency. Advanced Features 2 A medium-pitched tone sounds every 10 seconds and the display shows Failsoft. When the trunking system returns to normal operation, your radio automatically leaves failsoft operation and returns to trunked operation. 92 English Going Out of Range When your radio goes out of the range of the system, it can no longer lock onto a control channel. Procedure: 1 A low-pitched tone sounds. AND/OR The display shows the currently selected zone/channel combination and Out of range. 2 Your radio remains in this out-of-range condition until: It locks onto a control channel. OR It locks onto a failsoft channel. OR It is turned off. Using the Site Trunking Feature If the zone controller loses communication with any site, that site reverts to site trunking. The display shows the currently selected zone/channel combination and Site trunking. Note: When this occurs, you can communicate only with other radios within your trunking site. Viewing and Changing a Site This feature allows your radio to lock onto a specific site and not roam among wide-area talkgroup sites. This feature should be used with caution, since it inhibits roaming to another site in a wide-area system. This feature allows you to view the number of the current site or force your radio to change to a new one. Procedure: Use the preprogrammed Site Lock/Unlock button to toggle the lock state between locked and unlocked. OR Follow the procedure below. 1 < or > to Site. Viewing the Current Site Procedure: 1 Press the preprogrammed Site Search button. 2 The display momentarily shows the name of the current site and its corresponding received signal strength indicator (RSSI). 2 Press the Menu Select button directly below Site. Changing the Current Site 3 Press the Menu Select button directly below Lock to lock Procedure: the site. The display shows Site locked. OR Press the Menu Select button directly below Unlk to unlock the site. The display shows Site unlocked. 4 The radio saves the new site lock state and returns to the Home screen. Advanced Features Locking and Unlocking a Site 1 Press and hold down the preprogrammed Site Search button. 2 A tone sounds and the display momentarily shows Scanning site. 3 When the radio finds a new site, it returns to the Home screen. 93 English Mission Critical Wireless - Bluetooth Note: The use of this feature requires the "Full Feature" expansion board and the purchase of the Bluetooth Software. Turning On Bluetooth Procedure: 1 < or > to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen. 2 U or D to Status and press the Menu Select button directly below On. The display shows Status On, and b appears. OR The display shows Bluetooth on failed to indicate Bluetooth fails to launch. This feature allows the Radio to extend its functionality by connecting to external proprietary Motorola Accessories. The default setting for enabled Bluetooth is Bluetooth ON. See Turning Off Bluetooth on page 95 to turn the Bluetooth OFF. Advanced Features Note: 94 English Your radio must be preprogrammed to allow you to use this feature. 3 Press the Menu Select button directly below Exit to return to the Home screen. OR 1 Press the preprogrammed button to turn on the Bluetooth. 2 A short, medium-pitched tone sounds. The display shows momentary Bluetooth on, and b appears. OR The display shows Bluetooth on failed to indicate Bluetooth fails to launch. Re-Pair Timer Procedure: There are two options for configuring the Bluetooth pairing type on the radios. The type defines the duration the radio and the accessory retain the pairing information. 1 < or > to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen. 2 U or D to Status and press the Menu Select button directly below Off. The display shows Status Off, and b disappears. 3 Press the Menu Select button directly below Exit to return to the Home screen. OR 1 Press the preprogrammed button, to turn off the Bluetooth. • Immediate – When the radio and/or device is turned off after pairing, the keys are lost. When the radio and the device are turned back on, they cannot re-connect as the pairing keys are lost. The user must re-pair the devices to re-establish a new set of pairing keys. See Pairing Bluetooth Device with the Radio on page 97. • Infinite – When the radio and/or device are turned off after pairing, keys are NOT lost. When the radio and the device are turned back on, they can resume the Bluetooth connection without user intervention. Advanced Features Turning Off Bluetooth 2 A short, medium-pitched tone sounds. The display shows momentary Bluetooth off, and b disappears. 95 English Bluetooth Drop Timer Re-Pair Timer Options Re-Pair Timer Scenarios • When the radio is powered OFF, pairing key is lost immediately, and accessory attempts to pair again. If pairing is unsuccessful within the Drop Timer value, the accessory automatically powers OFF. Immediate The Bluetooth Drop Timer has two different settings and functions, depending upon the selection of the Re-Pair Timer.: Re-Pair Timer Options • 0 – 15 minutes buffer time to re-establish Immediate • When the accessory is powered OFF, all keys are lost immediately, and the user must re-pair the devices. Bluetooth Connection when the bluetooth signal is out of range; or when the devices are powered on/off. Advanced Features 96 English connection, the devices will attempt to reestablish Bluetooth Connection within the Drop Timer value. Infinite accessory attempts to re-establish the Bluetooth Connection for a period of time depending upon the Drop Timer value. If the devices fails to reconnect within the period, the accessory then powers OFF. Bluetooth Connection when the bluetooth signal is out of range; or when the devices are powered on/off. • 0 – 15 minutes buffer time to re-establish • When the devices lose Bluetooth • When the radio is powered OFF, the Drop Timer Options Infinite • 2 hours, 4 hours or 8 hours period for the devices keeping the pairing keys even though they are disconnected or powered off. So when they detects the presence of each other they can automatically re-establish the Bluetooth Connection within this period. Check with your dealer or system administrator for more information about these timers. See Pairing Bluetooth Device with the Radio on page 97 to establish the Bluetooth Connection. Pairing Bluetooth Device with the Radio Procedure: With your radio’s Bluetooth feature ON: the Blue dot-pairing indicator on the radio and the accessory. 2 If the pairing process is successful, the radio sounds an Bluetooth Pairing Indicator Note: Bluetooth range of operation is 10 meters line of sight. This is an unobstructed path between the location of the signal transmitter and the location of the receiver (the Radio and the Accessory). Obstacles that can cause an obstruction in the line of sight include trees, buildings, mountains, cars and etc.). It is NOT recommended that the User leave their radio behind and expect that the Accessory to work with a high degree of reliability when they are separated. At the fringe areas of reception both voice and tone quality will start to sound "garbled" or "broken". To correct this problem, simply position the Accessory and Radio closer to each other (within the 10 meter defined range) to re-establish clear audio reception. incremental-pitched tone to indicate paired. OR If the pairing process fails, the radio sounds a short, lowpitched tone. The display shows Bluetooth pairing failed. Repeat step 1 again. 3 The radio continues to connect to the device. Advanced Features 1 Turn on the accessory, then place it close to the radio using If the connecting process is successful, the radio sounds an incremental-pitched tone. The display shows connected, and a turns solid. OR If the connecting process fails, the radio sounds a short, low-pitched tone. The display shows connect failed. Repeat step 2 to reconnect the bluetooth. OR If the connecting process fails, the radio sounds a short, low-pitched tone. The display shows connect failed. After Bluetooth Drop Timer expires, if the device is still not re-connecting with the radio, the radio sounds a decremental-pitched tone to indicate unpaired. The display shows unpaired. 97 English Indicating Bluetooth Connection is Lost The radio shows solid a when the devices have a Bluetooth connection. Below is the scenario and radio indications when the connection is interrupted. Turning On the Bluetooth Audio (Routing the Audio from the Radio to the Headset) Procedure: 1 < or > to BT. Press the Menu Select button directly below Procedure: 1 The Bluetooth icon starts blinking for 10 seconds. The radio sounds an decremental-pitched tone and the display shows momentary disconnected. BT to access the Bluetooth feature screen. 2 U or D to Bluetooth spkr and press the Menu Select button directly below On. The display shows On. 3 Press the Menu Select button directly below Exit to return Advanced Features 2 If the Bluetooth device successfully re-connects before the Bluetooth Drop Timer expires, the display shows momentary connected, and a turns solid. OR If reconnecting is unsuccessful after the 10 seconds blinking timer expires, the b becomes solid. 98 English to the Home screen. OR 1 Short press the preprogrammed button to route the audio routing from the radio to the headset. 2 A short, medium-pitched tone sounds. The display shows Headset on. Turning Off the Bluetooth Audio (Routing the Audio from the Headset to the Radio) Adjusting the Volume of the Radio from Bluetooth Audio Device Procedure: 1 < or > to BT. Press the Menu Select button directly below With the Bluetooth audio device connected to the radio: BT to access the Bluetooth feature screen. 2 U or D to Bluetooth spkr and press the Menu Select button directly below Off. The display shows Off. 1 Adjust volume up/down on the bluetooth audio device. 2 The radio display shows Volume XX and sounds a short, medium-pitched tone. 3 Press the Menu Select button directly below Exit to return to the Home screen. OR Viewing the Bluetooth Active Devices Procedure: 1 Press the preprogrammed button to route the audio routing from the headset to the radio. 2 A short, medium-pitched tone sounds. The display shows Speaker on. Advanced Features Procedure: 1 < or > to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen. 2 U or D to Device and press the Menu Select button directly below Sel. 3 The display shows a list of current active Bluetooth devices with the active status below the device name. OR The display shows No devices if there are no active Bluetooth devices being detected. 4 Press the Menu Select button directly below Exit to return to the Home screen. 99 English Clearing All Pairing Information Utilities Procedure: Long press the preprogrammed Bluetooth On/Off button. A short, medium-pitched tone sounds. Proceed to step 3. OR In the Bluetooth feature screen, 1 U or D to Device and press the Menu Select button directly below Clr to clear all active Bluetooth devices. A short, medium-pitched tone sounds. 2 The display shows Clear all BT devices?. Press the Menu Advanced Features Select button directly below Yes to proceed. 3 The display shows Please wait to indicate clearing is in progress. 4 The display shows All BT devices cleared to indicate clearing is successful. OR The radio sounds a short, low-pitched tone. The display shows Clear all BT devices failed. The display returns to Bluetooth feature screen. Note: 100 English If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys on all previously paired devices as well. (Please see your accessories manual for further details.) Viewing the Recent Calls This feature allows you to view the recent incoming and outgoing call information of the following call types: • Call Alert • Selective Call • Private Call • Phone Call (Outgoing Only) • Emergency Call (Incoming Only) Note: The radio can also be preprogrammed to log only the radio IDs associated with incoming Dispatch Calls. Check with your dealer or system administrator for more information. Procedure: Press the preprogrammed Recent Calls button and proceed to Step 3. OR Follow the procedure below. 1 < or > to Rcnt. 2 Press the Menu Select button directly below Rcnt to access the Recent Calls feature screen. Selecting a Basic Zone Bank 4 Press the Menu Select button directly below Exit to return to This feature allows twice as many zones to be accessed from a switch, doubling the amount of switch positions. the Home screen. OR Press H or the PTT button to return to the Home screen. The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Note: The Zone Select feature must to be preprogrammed to the 3-position A-B-C switch, while the Basic Zone Bank feature must be preprogrammed to any side button or Top (Orange) button before you can use this feature. Procedure: 1 Use the preprogrammed Basic Zone Bank button to toggle Using the Flip Display This feature allows you to flip the content of the top display upside down. It is particularly useful when you would like to read the top display while the radio is still in the carry holder attached to your belt. Procedure: Press and hold the preprogrammed Light button to flip the display. the position between Bank 1 and Bank 2. 2 The top display shows the status icons (A, B, C, D, E or F) or Advanced Features 3 U or D to scroll through the list. the zone name based on the bank and switch position selected. See Basic Zone Bank 1 and Basic Zone Bank 2 on page 21 for more information on the status icons. 101 English Selecting an Enhanced Zone Bank Selecting the Power Level This feature is created in order to allow users to communicate in more zones. An Enhanced Zone Bank (EZB) consists of three zones. This also means each icon A, B, C, ... or Y consist of three zones. You can use the preprogrammed 3-position A-B-C switch to select the first, second or third zone in an EZB. You can select the power level at which your radio transmits. The radio always turns on to the default setting. This feature allows user to navigate from up to 75 zones in 25 EZBs. Settings: Advanced Features Note: The Enhanced Zone Bank Select feature must to be preprogrammed to the 3-position A-B-C switch, while the Enhanced Zone Bank feature must be preprogrammed to any side button or Top (Orange) button before you can use this feature. Procedure: 1 Press the preprogrammed EZB Up or EZB Down button to scroll the EZB up or down. OR Press and hold the preprogrammed EZB Up or EZB Down button to fast scroll the EZB up or down. 2 Turn the 3-Position A/B/C Switch to select the first, second or third zone in the selected EZB. 102 English Note: This feature must be preprogrammed by a qualified radio technician. • Select Low for a shorter transmitting distance and to conserve power. • Select High for a longer transmitting distance. Procedure: Use the preprogrammed Transmit Power Level Switch to toggle the power level between low and high power. OR Follow the procedure below. 1 < or > to Pwr. 2 Press the Menu Select button directly below Pwr. 3 The display shows Low power and the low power icon. OR The display shows High power and the high power icon. Selecting a Radio Profile Please refer to a qualified technician for more information. Note: The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Procedure: Use the preprogrammed Profile button and proceed to Step 3. OR Follow the procedure below. 1 < or > to Prfl. 2 Press the Menu Select button directly below Prfl to access the Profiles feature screen. 3 U or D to scroll through the menu selections. 4 Press the Menu Select button directly below Sel to select the required radio profile. OR Press the Menu Select button directly below Exit to exit the screen without making any changes. the Home screen indicates the current selected radio profile. Enabling and Disabling the Radio Alias This feature allows you to display or hide the radio alias (name). Procedure: 1 Press the Menu Select button directly below MyId. 2 The display momentarily shows Radio id off, and the radio alias disappears from the Home screen. OR The display momentarily shows Radio id on, and the radio alias appears on the Home screen. Advanced Features This feature allows you to manually switch the visual and audio settings of the radio. The display, backlight, alert tones, and audio settings are defined according to the preprogrammed radio settings of each radio profile. 5 The radio returns to the Home screen. The profile name on Selecting the Audio Speaker This feature allows you to select the speaker route for the radio's audio from either the main or the secondary speaker using the radio profile settings. Note: Your radio must be preprogrammed to allow you to use this feature. While both speakers function together with the secondary speaker enhancing intelligibility of the received audio during typical radio operation, each speaker has an independently-tuned frequency response and volume level operation. 103 English The secondary speaker also has a "whisper" mode with a modified volume taper for quieter modes of operation. Note: If an external speaker or microphone accessory is attached to the radio, neither internal speaker is operational as audio is routed to the accessory. Procedure: Use the preprogrammed Profile button and proceed to Step 3. OR Follow the procedure below. 1 < or > to Prfl. 2 Press the Menu Select button directly below Prfl to access Advanced Features the Profiles feature screen. 3 U or D to scroll through the menu selections. 4 Press the Menu Select button directly below Sel to select the radio profile with the required speaker routing. OR Press the Menu Select button directly below Exit to exit the screen without making any changes. 5 The radio returns to the Home screen. The profile name on the Home screen indicates the current selected radio profile. 104 English Controlling the Display Backlight You can enable or disable the radio’s display backlight as needed, if poor light conditions make the display or keypad difficult to read. Depending on how your radio is preprogrammed, you can also maintain a minimum backlight level on the radio's front display. Note: The backlight setting also affects the Menu Select buttons, the Menu Navigation buttons and the keypad backlighting accordingly. Procedure: Press the preprogrammed Light button to toggle the backlight on or off. OR Press any key of the keypad, the Menu Select or Menu Navigation buttons, or any programmable radio controls or buttons to turn the backlight on. Note: The backlight remains on for a preprogrammed time before it automatically turns off completely or returns to the minimum backlight level. Turning Voice Mute On or Off You can lock your radio’s keypad to avoid inadvertent key entry. You can enable and disable voice transmission, if needed. Procedure: Procedure: Press the preprogrammed Voice Mute button to turn the feature off or on. OR Follow the procedure below. Press the preprogrammed Keypad Lock button to toggle the keypad lock on or off. Turning Keypad Tones On or Off You can enable and disable keypad tones, if needed. Procedure: Press the preprogrammed Keypad Mute button to turn the tones off or on. OR Follow the procedure below. 1 < or > to Mute. 1 < or > to VMut. 2 Press the Menu Select button directly below VMut. 3 The display momentarily shows Voice mute off, and a short tone sounds, indicating that the feature is disabled. OR The display momentarily shows Voice mute on, and a short tone sounds, indicating that the feature is enabled. 2 Press the Menu Select button directly below Mute. Using the Time-Out Timer 3 The display momentarily shows Tones off, indicating that This feature turns off your radio’s transmitter. You cannot transmit longer than the preset timer setting. the keypad tones are disabled. OR The display momentarily shows Tones on, and a short tone sounds, indicating that the keypad tones are enabled. Advanced Features Locking and Unlocking the Keypad If you attempt to do so, the radio automatically stops your transmission, and you hear a talk-prohibit tone. 105 English The timer is defaulted at 60 seconds, but it can be preprogrammed from 3 to 120 seconds, in 15-second intervals, or it can be disabled entirely for each radio mode, by a qualified radio technician. Note: Note: Procedure: You will hear a brief, low-pitched, warning tone four seconds before the transmission times out. Procedure: 1 Hold down the PTT button longer than the preprogrammed time. You hear a short, low-pitched warning tone, the transmission is cut-off, and the LED goes out until you release the PTT button. Advanced Features 2 Release the PTT button. The timer resets. 3 Press the PTT button to re-transmit. The time-out timer restarts and the LED lights up solid red. Setting the Time and Date You can set the time and date for your radio. Settings: • The default time setting is a 12-hour clock.The display shows 12:00AM. • The AM/PM selection is not available for the 24-hour clock setting. 106 • The default setting for the domestic date shows Day/Mth/Yr. English Check with your dealer or system administrator for additional programmable settings for this feature. Editing the Time and Date 1 < or > to Clck. 2 Press the Menu Select button directly below Clck. The display shows the current setting of the radio. 3 Press the Menu Select button directly below Edit. The first item blinks. 4 U or D to change the selected item. OR < or > one or more times to move to an item you wish to change. U or D to change the selected item. OR Press the Menu Select button directly below Exit to exit the screen without making any changes and return to the Home screen. 5 Press the Menu Select button directly below Ok once you have finished to save your changes and return to the Home screen. OR Press the Menu Select button directly below Cncl to discard all changes and return to the Home screen. Press H at any time to return to the Home screen without saving your changes. If a call arrives while the radio is in the clock-setting menu, the radio exits clock setting and displays the call information. Any changes made before the call is NOT saved. Using the Conventional Squelch Operation Features One or more of the following options may be preprogrammed in your radio. Check with your dealer or system administrator for more information. Option Digital Carrier-Operated Squelch (COS) Result You hear any digital traffic. This feature filters out unwanted calls with low signal strength or channels that have a higher than normal background noise. Normal Squelch You hear any digital traffic having the correct network access code. Analog Options Selective Switch You hear any digital traffic having the correct network access code and correct talkgroup. Tone Private Line (PL), Digital Private-Line (DPL), and carrier squelch can be available (preprogrammed) per channel. Mode Result Carrier squelch (C) You hear all traffic on a channel. PL or DPL The radio responds only to your messages. Advanced Features Note: Digital Options Using the PL Defeat Feature This feature allows you to override any coded squelch (DPL or PL) that might be preprogrammed to a channel. The radio will also unmute to any digital activity on a digital channel. Procedure: Place the preprogrammed PL Defeat switch in the PL Defeat position. You hear any activity on the channel. OR The radio is muted if no activity is present. Note: When this feature is active, the Carrier Squelch status indicator is displayed. 107 English Using the Digital PTT ID Feature This feature allows you to see the radio ID (number) of the radio from whom you are currently receiving a transmission. This ID, consisting up to a maximum of eight characters, can be viewed by both the receiving radio and the dispatcher. Your radio’s ID number is also automatically sent every time the PTT button is pressed. This is a per-channel feature. For digital voice transmissions, your radio’s ID is sent continuously during the voice message. Three variations of smart PTT are available: Mode Transmit Inhibit on Busy Channel with Carrier You cannot transmit if any traffic is detected on the channel. Transmit Inhibit on Busy Channel with Wrong Squelch Code You cannot transmit on an active channel with a squelch code or (if secure-equipped) encryption key other than your own. If the PL code is the same as yours, the transmission is not prevented. Quick-Key Override This feature can work in conjunction with either of the two above variations. You can override the transmit-inhibit state by quick-keying the radio. In other words, two PTT button presses within the preprogrammed time limit. Advanced Features Using the Smart PTT Feature (Conventional Only) Smart PTT is a per-personality, programmable feature used in conventional radio systems to keep radio users from talking over other radio conversations. When smart PTT is enabled in your radio, you cannot transmit on an active channel. If you try to transmit on an active smart-PTT channel, you hear an alert tone, and the transmission is inhibited. The LED lights up solid yellow to indicate that the channel is busy. 108 English Description Accessing the Radio Information This feature allows you to check the charge status of the battery. This feature displays the following information of your radio: Procedure: 1 Press the Menu Select button directly below Batt. 2 The display shows the current battery charge, remaining capacity, and the estimated number of times the battery has been charged. 3 Press H or the Menu Select button directly below Exit to return to the Home screen. Accessing the General Radio Information • • • • • • • Host Version Secure Version Model Number ESN Flash Code Tuning Version Option Board Type (optional) • Option Board Bluetooth Address (optional) Your radio contains information on the following: • Expansion Board Type • Radio Information Note: • IP Display • Control Assignments • Soft ID (If Enabled) Note: The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. • • • • • • • DSP Version KG (Secure Algorithm) Serial Number Flash Size & Type RF Band Processor Version Option Board Serial Number (optional) • Option Board Software Version Advanced Features Accessing the Battery Information (optional) Press H at any time to return to the Home screen. Procedure: Press the preprogrammed Info button and proceed to Step 3. OR Follow the procedure below. 1 < or > to Info. 2 Press the Menu Select button directly below Info. 109 English 3 U or D to Radio Info and press the Menu Select button directly below Sel. Viewing the IP Information 4 The display shows the Information screen. This feature displays the device name, IP address, and status of your radio. 5 U or D to scroll through the various information. Note: OR Press the Menu Select button directly below Back to return to the previous screen. OR Press H to return to the Home screen. The device name of your radio is preprogrammed. Check with your dealer or system administrator for more information. Procedure: Press the preprogrammed Info button and proceed to Step 3. OR Follow the procedure below. Advanced Features 1 < or > to Info. 110 English 2 Press the Menu Select button directly below Info. 3 U or D to IP Info and press the Menu Select button directly below Sel. 4 The display shows the IP Info screen. 5 U or D to scroll through the various information. OR Press the Menu Select button directly below Back to return to the previous screen. OR Press H to return to the Home screen. Editing the Soft ID This feature displays the programmable radio functions assigned to the controls of your radio for the currently selected channel. This feature allows you to change your username. See Programmable Features on page 11 for more information on the various programmable features of your radio. Procedure: Press the preprogrammed Info button and proceed to Step 3. OR Follow the procedure below. Note: Your radio must be preprogrammed to allow you to use this feature. Procedure: Press the preprogrammed Info button and proceed to Step 3. OR Follow the procedure below. 1 < or > to Info. 1 < or > to Info. 2 Press the Menu Select button directly below Info. 2 Press the Menu Select button directly below Info. 3 U or D to Soft ID and press the Menu Select button directly 3 U or D to Control map and press the Menu Select button 4 The display shows the current Soft ID. directly below Sel. 4 The display shows the Control Map screen. 5 U or D to scroll through the various information. OR Press the Menu Select button directly below Back to return to the previous screen. OR Press H to return to the Home screen. Advanced Features Viewing the Control Assignments below Sel. 5 Press the Menu Select button directly below Edit to edit the current Soft ID. OR Press the Menu Select button directly below Back to return to the previous screen. 111 English 6 A blinking cursor appears in the Edit Soft ID screen. Use the keypad to edit the text. Press < to move one space to the left. Press > to move one space to the right. Press the Menu Select button directly below Del to delete any unwanted characters. Press * to add a space. Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode. Press # to toggle between numeric and letter mode. Advanced Features 7 Press the Menu Select button directly below Ok to save the new Soft ID and return to the previous screen. OR Press the Menu Select button directly below Cncl to return to the previous screen. 112 English Voice Announcement This feature enables the radio to audibly indicate the current feature mode, Zone or Channel the user has just assigned. This audio indicator can be customized per customer requirements. This is typically useful when the user is in a difficult condition to read the content shown on the display. Each voice announcement is within a limit of three seconds maximum. The sum total duration for all voice announcements in a radio shall be no more than 1000 seconds. Note: This feature must be preprogrammed by a qualified radio technician. The features which Voice Announcement supports are: • Zone • Channel • Scan • PL Disabled • Talkaround/Direct • Tx Inhibit Note: Voice announcements support certain number of zonechannel, but not all. Seek advice from your dealer or qualified technician for the best selections for this feature. The two options of priority for the Voice Announcement available are: when the radio is receiving calls. • Low – disables the voice of the feature from announcing when the radio is receiving calls. Procedure: Pressing this preprogrammed playback button will always enable the voice feature to announce in High priority. All the three programmable buttons at the side of the radio support this feature. • Change to a new zone. The radio announces the current zone and channel it is transmitting. You hear a voice announcement when the features below are preprogrammed in the radio. • Change to a new channel remaining within the current zone. • The radio powers up. The radio announces the current zone • Press either the Menu Select button or preprogrammed and channel it is transmitting. • Press the preprogrammed voice announcement button (which specifically programmed to playback the current zone and channel). The radio announces the current zone and channel it is transmitting. The radio announces the current channel. button or switch of the radio to launch or terminate Scan, PL Disabled, Talkaround/Direct or Transmit Inhibit. The radio announces the corresponding feature activation or deactivation. Advanced Features • High – enables the voice of the feature to announce even Note: 113 English Caring for Your Radio Helpful Tips Take a moment to review the following: Caring for Your Radio . . . . . . . . . . . . . . . . . . . . . . . . Cleaning Your Radio . . . . . . . . . . . . . . . . . . . . . . . Handling Your Radio . . . . . . . . . . . . . . . . . . . . . . . Servicing Your Radio . . . . . . . . . . . . . . . . . . . . . . . Taking Care of the Battery. . . . . . . . . . . . . . . . . . . . . Checking the Battery Charge Status . . . . . . . . . . . Battery Recycling and Disposal. . . . . . . . . . . . . . . page 114 page 115 page 115 page 116 page 116 page 116 page 117 Caution • The APX 6000 radio casting has a vent port that allows for pressure equalization in the radio. Never poke this vent with any objects, such as needles, tweezers, or screwdrivers. This could create leak paths into the radio and the radio’s submergibility will be lost. Vent Port Helpful Tips • (For APX 6000 R 114 English Radios Only) The APX 6000 R radio is designed to be submerged to a maximum depth of 6 feet, with a maximum submersion time of 2 hours. Exceeding either maximum limit may result in damage to the radio. Caution Elastomer technology materials used for seals in rugged portable radios can age with time and environmental exposure. Therefore, Motorola recommends that rugged radios be checked annually as a preventive measure in order to assure the watertight integrity of the radio. Motorola details the disassembly, test, and reassembly procedures along with necessary test equipment needed to inspect, maintain and troubleshoot radio seals in the radio’s service manual. • If the radio battery contact area has been submerged in water, dry and clean the radio battery contacts before attaching a battery to the radio. Otherwise, the water could short-circuit the radio. • If the radio has been submerged in water, shake the radio well so that any water that may be trapped inside the speaker grille and microphone port can be removed. Otherwise, the water will decrease the audio quality of the radio. • Do not disassemble the radio. This could damage radio seals and result in leak paths into the radio. Any radio maintenance should be performed only by a qualified radio technician. Cleaning Your Radio To clean the external surfaces of your radio: 1 Combine one teaspoon of mild dishwashing detergent to one gallon of water (0.5% solution). 2 Apply the solution sparingly with a stiff, non-metallic, shortbristled brush, making sure excess detergent does not get entrapped near the connectors, controls or crevices. Dry the radio thoroughly with a soft, lint-free cloth. Helpful Tips • (For APX 6000 R Radios Only) 3 Clean battery contacts with a lint-free cloth to remove dirt or grease. Caution Do not use solvents to clean your radio. Spirits may permanently damage the radio housing. Do not submerge the radio in the detergent solution. Handling Your Radio • Do not pound, drop, or throw the radio unnecessarily. Never carry the radio by the antenna. • Avoid subjecting the radio to an excess of liquids. Do not submerge the radio unless it is a ruggedized, APX 6000 R model. 115 English • Avoid subjecting the radio to corrosives, solvents or spirits. Taking Care of the Battery • Do not disassemble the radio. • Keep the accessory-connector cover in place until ready to use the connector. Replace the cover immediately once the accessory has been disconnected. Helpful Tips Servicing Your Radio Proper repair and maintenance procedures will assure efficient operation and long life for this product. A Motorola maintenance agreement will provide expert service to keep this and all other communication equipment in perfect operating condition. A nationwide service organization is provided by Motorola to support maintenance services. Through its maintenance and installation program, Motorola makes available the finest service to those desiring reliable, continuous communications on a contract basis. For a contract service agreement, please contact your nearest Motorola service or sales representative, or an authorized Motorola dealer. Express Service Plus (ESP) is an optional extended service coverage plan, which provides for the repair of this product for an additional period of either one or two years beyond the normal expiration date of the standard warranty. For more information about ESP, contact the Motorola Radio Support Center at 3761 South Central Avenue, Rockford, IL 61102 (800) 227-6772 / (847)725-4200. 116 English Checking the Battery Charge Status Your radio can indicate the battery’s charge status through: • the LED and sounds. • the fuel gauge icon on the display. You can also check the battery charge status via the menu entry. See Accessing the Battery Information on page 109 for more information. LED and Sounds When your battery is low: • the LED blinks red when the PTT button is pressed. • you hear a low-battery “chirp” (short, high-pitched tone). Fuel Gauge Icon A blinking fuel gauge icon ( ) is displayed only when the battery voltage drops to low level. In this case, replace the battery with a fully charged one. Battery Charge Gauge Battery Charge Top Display 76% to 100% full Top Display 11% to 25% Top Display 51% to 75% Top Display 10% or less (at 10%, the gauge begins blinking) Helpful Tips Gauge Battery Recycling and Disposal Top Display 26% to 50% In the U.S. and Canada, Motorola participates in the nationwide Rechargeable Battery Recycling Corporation (RBRC) program for NiCd battery collection and recycling. Many retailers and dealers participate in this program. For the location of the drop-off facility closest to you, access RBRC's Internet web site at www.rbrc.com or call 1-800-8BATTERY. This internet site and telephone number also provide other useful information concerning recycling options for consumers, businesses, and governmental agencies. 117 English Accessories For a list of Motorola-approved antennas and other accessories, visit the following website: http://www.motorola.com/governmentandenterprise On the website, search for APX 6000 Portable Radio. You will see the accessories information besides the specifications of the radio. You can also contact your dealer for details. The certifications for the accessories are as below. VHF Band (FCC ID: AZ489FT3824) UHF Band (FCC ID: AZ489FT4899) 700/800 MHz Band (FCC ID: AZ489FT5859) Accessories Bluetooth Enabled Models: VHF Band (FCC ID: AZ489FT3829) UHF Band (FCC ID: AZ489FT4892) 700/800 MHz Band (FCC ID: AZ489FT5863) 118 English State the position of the vessel in distress, using any information that will help responders to locate you, e.g.: • latitude and longitude • bearing (state whether you are using true or magnetic north) • distance to a well-known landmark • vessel course, speed or destination State the nature of the distress. Specify what kind of assistance you need. State the number of persons on board and the number needing medical attention, if any. If you are in imminent and grave danger at sea and require emergency assistance, use VHF Channel 16 to send a distress call to nearby vessels and the United States Coast Guard. Transmit the following information, in this order: 1 “MAYDAY, MAYDAY, MAYDAY.” Mention any other information that would be helpful to responders, such as type of vessel, vessel length and/or tonnage, hull color, etc. “OVER.” 11 If you do not receive an immediate response, remain by the radio and repeat the transmission at intervals until you receive a response. Be prepared to follow any instructions given to you. Take a moment to review the following: Special Channel Assignments . . . . . . . . . . . . . . . . . . page 119 Operating Frequency Requirements . . . . . . . . . . . . . page 120 Special Channel Assignments Emergency Channel “THIS IS _____________________, CALL SIGN __________.” State the name of the vessel in distress 3 times, followed by the call sign or other identification of the vessel, stated 3 times. Repeat “MAYDAY” and the name of the vessel. “WE ARE LOCATED AT _______________________.” Appendix: Maritime Radio Use in the VHF Frequency Range Appendix: Maritime Radio Use in the VHF Frequency Range 10 Wait for a response. Non-Commercial Call Channel For non-commercial transmissions, such as fishing reports, rendezvous arrangements, repair scheduling, or berthing information, use VHF Channel 9. 119 English Appendix: Maritime Radio Use in the VHF Frequency Range Operating Frequency Requirements A radio designated for shipboard use must comply with Federal Communications Commission Rule Part 80 as follows: • on ships subject to Part II of Title III of the Communications Act, the radio must be capable of operating on the 156.800 MHz frequency • on ships subject to the Safety Convention, the radio must be capable of operating: • • in the simplex mode on the ship station transmitting frequencies specified in the 156.025 – 157.425 MHz frequency band, and in the semiduplex mode on the two frequency channels specified in the table below. Note: Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters. Additional information about operating requirements in the Maritime Services can be obtained from the full text of FCC Rule Part 80 and from the US Coast Guard. Table A-1: VHF Marine Channel List Frequency (MHz) Table A-1: VHF Marine Channel List (Continued) Frequency (MHz) Channel Number Transmit Receive 156.150 160.750 156.200 160.800 156.250 160.850 156.300 – 156.350 160.950 156.400 – 156.450 156.450 10 156.500 156.500 11 156.550 156.550 12 156.600 156.600 13** 156.650 156.650 14 156.700 156.700 15** 156.750 156.750 16 156.800 156.800 17** 156.850 156.850 18 156.900 161.500 156.950 161.550 Channel Number Transmit Receive 19 156.050 160.650 20 157.000 161.600 160.700 157.050 161.650 22 157.100 161.700 120 English 156.100 Table A-1: VHF Marine Channel List (Continued) Table A-1: VHF Marine Channel List (Continued) Frequency (MHz) Transmit 157.150 24 157.200 161.800 25 157.250 161.850 26 157.300 161.900 27 157.350 28 157.400 60 Frequency (MHz) Receive Channel Number Transmit Receive 161.750 75 *** *** 76 *** *** 77** 156.875 – 78 156.925 161.525 161.950 79 156.975 161.575 162.000 80 157.025 161.625 156.025 160.625 157.075 161.675 156.075 160.675 157.125 161.725 62 156.125 160.725 157.175 161.775 63 156.175 160.775 84 157.225 161.825 156.225 160.825 85 157.275 161.875 65 156.275 160.875 86 157.325 161.925 66 156.325 160.925 87 157.375 161.975 67** 156.375 156.375 88 157.425 162.025 68 156.425 156.425 69 156.475 156.475 71 156.575 156.575 72 156.625 – 73 156.675 156.675 74 156.725 156.725 Appendix: Maritime Radio Use in the VHF Frequency Range Channel Number Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters. ** Low power (1 W) only *** Guard band Note: A – in the Receive column indicates that the channel is transmit only. 121 English Term Glossary This glossary is a list of specialized terms used in this manual. Glossary Term Acknowledgment of communication. Active Channel A channel that has traffic on it. Analog Signal An RF signal that has a continuous nature rather than a pulsed or discrete nature. ARS Automatic Registration Service ASTRO 25 Trunking Motorola standard for wireless digital trunked communications. ASTRO Conventional Motorola standard for wireless digital conventional communications. Autoscan A feature that allows the radio to automatically scan the members of a scan list. Bluetooth 122 English Bluetooth Pairing Bluetooth pairing occurs when two bluetooth devices exchanged a passkey to form a paired Bluetooth wireless connection. Call Alert Privately page an individual by sending an audible tone. Carrier Squelch Feature that responds to the presence of an RF carrier by opening or unmuting (turning on) a receiver’s audio circuit. A squelch circuit silences the radio when no signal is being received so that the user does not have to listen to “noise”. Central Controller A software-controlled, computer-driven device that receives and generates data for the trunked radios assigned to it. It monitors and directs the operations of the trunked repeaters. Channel A group of characteristics such as transmit/ receive frequency pairs, radio parameters, and encryption encoding. CHIB Control Head Interface Board Definition ACK Bluetooth is an open wireless technology standard for exchanging data over short distances from fixed and mobile devices with high levels of security. Definition Term Definition Conventional Typically refers to radio-to-radio communications, sometimes through a repeater (see Trunking). Conventional Scan List A scan list that includes only conventional channels. Cursor A visual tracking marker (a blinking line) that indicates a location on the display. CP Codeplug Deadlock Displayed by the radio after three failed attempts to unlock the radio.The radio must be powered off and on prior to another attempt. Definition DSP Digital Signal Processing Dynamic Regrouping A feature that allows the dispatcher to temporarily reassign selected radios to a single special channel so they can communicate with each other. DSR Dynamic System Resilience EID Encrypted Integrated Data ESN Electrical Serial Number Failsoft A feature that allows communications to take place even though the central controller has failed. Each trunked repeater in the system transmits a data word informing every radio that the system has gone into failsoft. FCC Federal Communications Commission. FM Frequency Modulation Digital Private Line (DPL) A type of coded squelch using data bursts. Similar to PL except a digital code is used instead of a tone. Hang Up Disconnect. Home screen The first display information after the radio completes its self test. Digital Signal An RF signal that has a pulsed, or discrete, nature, rather than a continuous nature. IV & D Integrated Voice and Data Dispatcher An individual who has radio system management duties. KVL Key-variable loader: A device for loading encryption keys into the radio. Glossary In a trunking system, one of the channels that is used to provide a continuous, twoControl Channel way/data communications path between the central controller and all radios on the system. Term 123 English Term Definition LCD Liquid crystal display. LED Light-emitting diode. MCHB Millennium Control Head Board MDC Motorola Data Communication Menu Entry A software-activated feature shown at the bottom of the display – selection of these features is controlled by the {, |, and Glossary } buttons. Monitor Check channel activity by pressing the Monitor button. If the channel is clear, you hear static. If the channel is in use, you hear conversation. It also serves as a way to check the volume level of the radio, since the radio “opens the squelch” when the monitor button is pressed. Multi-System Talkgroup Scan List A scan list that can include both talkgroups (trunked) and channels (conventional). Network Access Code (NAC) operates on Network Access digital channels to reduce voice channel Code interference between adjacent systems and sites. NiCd 124 English Nickel-cadmium Term Definition NiMH Nickel-metal-hydride. Non-Tactical/ Revert The user talks on a preprogrammed emergency channel. The emergency alarm is sent out on this same channel. OTAR Over-the-air rekeying. Page A one-way alert, with audio and/or display messages. Personality A set of unique features specific to a radio. PIN Personal Identification Number Preprogrammed Refers to a software feature that has been activated by a qualified radio technician. Private (Conversation) Call A feature that lets you have a private conversation with another radio user in the talkgroup. Private Line (PL) A sub-audible tone that is transmitted such that only receivers decoding the tone receives it. Programmable Refers to a radio control that can have a radio feature assigned to it. PTT Push-To-Talk – the PTT button engages the transmitter and puts the radio in transmit (send) operation when pressed. Definition Radio Frequency (RF) The part of the general frequency spectrum between the audio and infrared light regions (about 10 kHz to 10,000,000 MHz). Repeater A conventional radio feature, where you talk through a receive/transmit facility that re-transmits received signals, in order to improve communications range and coverage. Selective Call A feature that allows you to call a select individual, intended to provide privacy and to eliminate the annoyance of having to listen to conversations of no interest to you. Any digital P25 traffic having the correct Selective Switch Network Access Code and the correct talkgroup. Squelch Special electronic circuitry, added to the receiver of a radio, that reduces, or cuts off, unwanted signals before they are heard in the speaker. SSI Synchronous Serial Interface Standby An operating condition whereby the radio’s speaker is muted but still continues to receive data. Term Definition Status Calls Pre-defined text messages that allow the user to send a conditional message without talking. Tactical/ Non-Revert The user talks on the channel that was selected before the radio entered the emergency state. Talkaround Bypass a repeater and talk directly to another unit for easy local unit-to-unit communications. Talkgroup An organization or group of radio users who communicate with each other using the same communication path. TMS Text Messaging Service Trunking The automatic sharing of communications paths between a large number of users (see Conventional). Trunking Priority Monitor Scan List A scan list that includes talkgroups that are all from the same trunking system. USK Unique Shadow Key. Glossary Term 125 English Term Definition Zone A grouping of channels. Glossary UTC Coordinated Universal Time. The international time standard (formerly Greenwich Mean Time, or GMT). Zero hours UTC is midnight in Greenwich, England, which is located at 0 degrees longitude. Everything east of Greenwich (up to 180 degrees) is later in time; everything west is earlier. There are 42 time authorities around the world that are constantly synchronizing with each other. Abbreviated as UTC (English backronym = Universal Time, Coordinated), it is also known as Zulu (Z) Time. 126 English Limited Warranty MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: MOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA manufactured Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below: ASTRO APX 6000 Portable Units One (1) Year Product Accessories One (1) Year MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. II. GENERAL PROVISIONS: This warranty sets forth the full extent of MOTOROLA'S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLA’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR Commercial Warranty Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Commercial Warranty 127 English INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. STATE LAW RIGHTS: SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. Commercial Warranty IV. HOW TO GET WARRANTY SERVICE: You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA at 1-800-927-2744 US/Canada. V. WHAT THIS WARRANTY DOES NOT COVER: A) Defects or damage resulting from use of the Product in other than its normal and customary manner. B) Defects or damage from misuse, accident, water, or neglect. 128 English C)Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. D)Breakage or damage to antennas unless caused directly by defects in material workmanship. E) A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLA's normal warranty inspection and testing of the Product to verify any warranty claim. F) Product which has had the serial number removed or made illegible. G)Rechargeable batteries if: (1) any of the seals on the battery enclosure of cells are broken or show evidence of tampering. (2) the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. H)Freight costs to the repair depot. I) A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’s published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. J) Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. K) Normal and customary wear and tear. VI. PATENT AND SOFTWARE PROVISIONS: Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. Commercial Warranty MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following: A) that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim; B) that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and C)should the Product or parts become, or in MOTOROLA’s opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. VII. GOVERNING LAW: This Warranty is governed by the laws of the State of Illinois, U.S.A. 129 English Notes Notes 130 English Motorola, Inc. 1301, E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. © 2010 Motorola, Inc. All rights reserved. December 2010. *68012001079* 68012001079-B
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Producer : Acrobat Distiller 8.3.0 (Windows) Create Date : 2011:08:26 15:11:18-04:00 Creator Tool : FrameMaker 8.0 Modify Date : 2011:08:26 16:56:29-04:00 Metadata Date : 2011:08:26 16:56:29-04:00 Format : application/pdf Creator : Motorola Title : APX 7000 Portable Dual Display User Guide Document ID : uuid:ff7ba781-2fc1-430c-9f87-338421790b3a Instance ID : uuid:76e90a8d-7b5d-4cd8-bf4e-69c9e9b9da4a Page Count : 146 Author : MotorolaEXIF Metadata provided by EXIF.tools