Motorola Solutions 89FT4861 SSE 5000 Protable Radio User Manual NYPD QuickGuide

Motorola Solutions, Inc. SSE 5000 Protable Radio NYPD QuickGuide

Exhibit D Users Manual per 2 1033 c3

SSE 5000 Portable Radio Quick Guide6881094C16-OProduct Safety and RF Exposure ComplianceATTENTION!This radio is restricted to ocupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits.Radio Control TopRadio On/Off:•ON: Turn the On/Off/Volume knob clockwise.•OFF: Turn the On/Off/Volume knob counter-clockwise.Mode/Channel Selection:•MODE: Togg l e th e Mode Select switch to A, B, C, D, E or F (see the mode/channel map).•CHANNEL: Turn the Channel Select knob to your desired channel (see the mode/channel map).Display Backlight/Flip:•BACKLIGHT: Press the Display button.•FLIP: Press and hold the Display button for 2 seconds.Volume:•RAISE: Turn the On/Off/Volume knob clockwise.•LOWER: Turn the On/Off/Volume knob counter-clockwise.Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio.!C a u t i o nOn/Off/Volume KnobChannel Select KnobTransmit/Receive IndicatorDisplay ButtonMode Select Switch
6881094C16-ORadio Side ButtonsTransmit/Receive:•TRANSMIT: Press the PTT button.•RECEIVE: Release the PTT button.Monitoring:•CARRIER SQUELCH: Press the Monitor button.•OPEN SQUELCH: Press and hold the Monitor button for 2 seconds.Secure Operation:ON/OFF: Press the Secure button.Scan:•ON/OFF: Press the Scan button.•NUISANCE CHANNEL DELETE: Press and hold the Scan button for 2 seconds.•NUISANCE CHANNEL RESTORE: Press the Scan button to turn scan off, then press it again to turn scan back on.Monitor ButtonPTT ButtonSecure ButtonScan Button
SSE 5000 Portable Radio Quick Guide6881094C16-ODisplay IconsAlert TonesLED Indications• Solid red – Transmitting• Flashing red – Low battery• Solid green – Incoming call alert page or selective call• Flashing green – Channel is busy• Double flashing green – Incoming secure callLow battery (2 high tones) Button press (1 medium tone)Call received (2 medium tones)Page received (4 medium tones)TOT warning or invalid button press (1 low tone)TOT limit or invalid mode (long low tone)PHA MAN Z3PHA MAN Z3
6881094C16-OMode/Channel MapModeChannel A B C12345678910111213141516
6881094C16-OModeChannel D E F12345678910111213141516
SSE 5000 Portable Radio Quick Guide6881094C16-OAccessory InstallationAntenna:•ATTACH: With the radio turned off, twist the antenna clock-wise onto the connector on the top of the radio.•REMOVE: With the radio turned off, twist the antenna counter-clockwise to remove it from the radio.Battery:•ATTACH: With the radio turned off, align the baseplate on the bottom of the radio with the groove on the top of the battery, and slide the battery toward the latch until it clicks into place.•REMOVE: With the radio turned off, slide the battery latch up and hold it while sliding the battery away from the latch.Belt Clip:•ATTACH: With the battery removed, hook the top of the belt clip into the slot near the top of the radio in the back. Press the bottom of the belt clip into the slot near the base of the radio until it clicks into place.•REMOVE: With the battery removed, use a small, flat-bladed screwdriver to disengage the locking tab on the bottom of the belt clip from the base of the radio. Lift the belt clip up and away from the radio.Location of antenna connector

Navigation menu