Motorola Solutions 89FT4891 PORTABLE TRANSMITTER (CLP) User Manual CLP QuickRef Eng v3 2

Motorola Solutions, Inc. PORTABLE TRANSMITTER (CLP) CLP QuickRef Eng v3 2

Users Manual

Download: Motorola Solutions 89FT4891 PORTABLE TRANSMITTER (CLP) User Manual CLP QuickRef  Eng  v3 2
Mirror Download [FCC.gov]Motorola Solutions 89FT4891 PORTABLE TRANSMITTER (CLP) User Manual CLP QuickRef  Eng  v3 2
Document ID1227048
Application IDkvkL8gLwcok9vb9X0Vk8pA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.07kB (88359 bits)
Date Submitted2010-01-13 00:00:00
Date Available2010-01-13 00:00:00
Creation Date2009-10-06 11:21:47
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2009-10-06 11:21:47
Document TitleMicrosoft Word - CLP QuickRef _Eng_ v3.2.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: ngcw73

QUICK REFERENCE
CLP SERIES™ PORTABLE RADIO
Power/Battery
Button
Volume
Control (+/-)
Accessory
Connector
Menu Button
Smart Status
Glow
Push-to-Talk
(PTT) Button
Congratulations on your new radio!
Your radio is ready to use after a fully-charged battery has been installed and it is connected to an appropriate audio accessory.
Please refer to www.motorola.com for information on approved accessories.
CLP Series professional two-way radios operate on radio frequencies that are regulated by the Federal Communications
Commission (FCC). In order to transmit on these frequencies, you are required to have a license issued by the FCC.
http://www.fcc.gov
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful
interference.
GETTING STARTED
1. INSTALL THE BATTERY
•
•
•
Push up the latch at the bottom of the battery door and lift the battery door off the radio.
Align the battery contacts with tabs in the battery compartment. Insert the contact side of the battery first, then press the
battery down to secure in place.
Put the battery door back on the radio. Push down the latch to lock.
2. CHARGE THE BATTERY
Connect the power supply to the drop-in charging tray or multi-unit charger and insert the radio into the tray. The light on the
charger is red when the radio is charging. It turns to green once the radio is fully charged.
3. CONNECT AN AUDIO ACCESSORY
Connect a wired audio accessory or pair with a wireless accessory (select models only).
4. TURN THE RADIO ON
Press and hold the Power/Battery button until you hear a short tone and the Smart Status Glow lights up. (To turn off, press and
hold the button until you hear a short tone.)
5. CHECK BATTERY STATUS
When powered on, short press and release the Power/Battery button, the Smart Status Glow gives you the battery status:
Green – high level
Yellow – medium level
Red – low level
Red blink – critical
After the Smart Status Glow indicates the BATTERY STATUS, it will return to the current channel color.
TRANSMITTING AND RECEIVING
1. Turn radio on and set volume level by pressing volume control. A total of 16 volume levels are available from 1 to 16.
2. To talk, press and hold the PTT button on the front of the radio. Speak clearly into the microphone on the audio accessory. When
finished talking, release the PTT to listen.
3. To receive, listen through the earpiece at the volume level you have set. Press the PTT to respond.
NOTE: CLP Series radios always require the use of an audio accessory with microphone and speaker.
OPERATION WITH DEFAULT MENU SETTING:
Menu Item 1: Channel
Menu Item 2: Monitor
Menu Item 3: Scan
Menu Item 4: Call Tone (OFF is default)
NOTE: For single channel models, only Monitor is available from Menu list. To activate, press and hold the Menu Button; to
deactivate, press and hold the Menu Button again.
For further information, refer to your specific product User Guide.
For product-related questions, please call: 1-800-448-6686 or visit www.motorola.com
ATTENTION
Before using this product, read the RF energy awareness information and operating instructions contained in the Safety and RF
Energy Exposure Booklet enclosed with your radio package.
MOTOROLA, the Stylized M Logo, are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective
owners.
Motorola, Inc. 2009. All rights reserved.
Printed in Malaysia.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:10:06 11:21:47-04:00
Create Date                     : 2009:10:06 11:21:47-04:00
Format                          : application/pdf
Title                           : Microsoft Word - CLP QuickRef _Eng_ v3.2.doc
Creator                         : ngcw73
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:a673f417-91ca-4b46-af3e-e82d28b00e0e
Instance ID                     : uuid:67736df9-63fc-4cba-a943-4737e59f247d
Page Count                      : 2
Author                          : ngcw73
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AZ489FT4891

Navigation menu