Motorola Solutions 89FT5798 Hand Held Portable Transmitter User Manual 93C86 A forFCC

Motorola Solutions, Inc. Hand Held Portable Transmitter 93C86 A forFCC

Contents

Amended Users Manual

Guía del usarioManual do usuárioUser GuidecontactocontrolRadios ProfesionalesTan Dedicado Como Lo Es UstedCA, Motorola, Radios Profesionales, Serie PRO, PRO7550, PRO7650, Tan DedicadoComo Lo Es Usted, Privacy Plus, y Call Alert son marcas de Motorola, Inc. © 2000 Motorola, Inc. Todos los derechos reservados. Impreso en los EE.UU. A, Motorola, R‡dios Profissionais, SŽrie PRO, PRO7550, PRO7650, T‹o DedicadoQuanto ƒ Voc•, Privacy Plus, e Call Alert s‹o marcas de Motorola, Inc. © 2000 Motorola, Inc. Todos os direitos reservados. Impresso nos EUA.A, Motorola, Professional Radio, PRO Series, PRO7550, PRO7650, As DedicatedAs You Are, Privacy Plus, and Call Alert are trademarks of Motorola, Inc.© 2000 Motorola, Inc. All rights reserved. Printed in U.S.A.68P81093C86-AcontactocontrolPRO7550PRO7550™ and PRO7650™ Radio PortátilRádio PortátilPortable Radio
1 EnglishCONTENTS Computer Software Copyrights. . . . . . . . . . 3 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety and General Information . . . . . . . . . 5RF Operational Characteristics . . . . . . . 5Exposure To Radio Frequency Energy . 5Portable Radio Operation and EME Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . 6Antenna Care. . . . . . . . . . . . . . . . . . . . . 6Two-Way Radio Operation. . . . . . . . . . . 6Body-Worn Operation . . . . . . . . . . . . . . 6Approved Accessories . . . . . . . . . . . . . . 7Electromagnetic Interference/Compatibility . . . . . . . . . . . . . . . . . . . . . . . . 7Safety and General . . . . . . . . . . . . . . . . . . . 8Operational Warnings . . . . . . . . . . . . . . . . . 8Operational Cautions . . . . . . . . . . . . . . . . . 9Intrinsically Safe Radio Information. . . . . . 10FMRC Approved Equipment . . . . . . . . 10Repair of FMRC Approved Products . . 11 Radio Overview . . . . . . . . . . . . . . . . . . . . 15 Parts of the Radio . . . . . . . . . . . . . . . . . . . 15PRO7550™ and PRO7650™ Models . 15On/Off/Volume Knob . . . . . . . . . . . . . . 16Mode Selector Knob . . . . . . . . . . . . . . 16LED Indicator. . . . . . . . . . . . . . . . . . . . 16Push-to-Talk (PTT) Button . . . . . . . . . 16Microphone . . . . . . . . . . . . . . . . . . . . . 16Keypad Keys . . . . . . . . . . . . . . . . . . . . 16Menu Keys . . . . . . . . . . . . . . . . . . . . . 18Selecting a Feature . . . . . . . . . . . . . . . 18Menu Display. . . . . . . . . . . . . . . . . . . . 19LCD Screen and Icons . . . . . . . . . . . . 19Alert Tone Indications . . . . . . . . . . . . . 20Programmable Buttons . . . . . . . . . . . . 22Trunked Radio Systems . . . . . . . . . . . . . . 24 Getting Started . . . . . . . . . . . . . . . . . . . . 25 Battery Information . . . . . . . . . . . . . . . . . . 25Charging the Battery . . . . . . . . . . . . . . 25Battery Charge Status. . . . . . . . . . . . . 26Attaching the Battery. . . . . . . . . . . . . . 27Removing the Battery . . . . . . . . . . . . . 27Accessory Information . . . . . . . . . . . . . . . 28Removing the Antenna . . . . . . . . . . . . 28Attaching the Belt Clip. . . . . . . . . . . . . 29Removing the Belt Clip . . . . . . . . . . . . 29Attaching the Side Connector Cover. . 30Turning The Radio On or Off. . . . . . . . 30Receiving a Trunked Call . . . . . . . . . . . . . 30Radio Self Test. . . . . . . . . . . . . . . . . . . . . 31 CONTENTS
2 EnglishCONTENTSRadio Calls (Trunked Operation Only) . 33 Selecting a Zone and Mode . . . . . . . . . . . 33Selecting a Zone . . . . . . . . . . . . . . . . . 33Selecting a Mode. . . . . . . . . . . . . . . . . 34Receiving a Call . . . . . . . . . . . . . . . . . . . . 34Making a Call . . . . . . . . . . . . . . . . . . . . . . 34Conventional Modes . . . . . . . . . . . . . . 34Trunked Modes . . . . . . . . . . . . . . . . . . 35Low-Battery Alert. . . . . . . . . . . . . . . . . 35Coded Squelch Operation . . . . . . . . . . 35Variable RF Power Level (SelectedModels Only) . . . . . . . . . . . . . . . . . . . . 35Failsoft Operation (Trunked SystemsOnly) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Muting the Keypad Tones. . . . . . . . . . . . . 36 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Scan Operation. . . . . . . . . . . . . . . . . . . . . 37Turning Scan On or Off with theKeypad) . . . . . . . . . . . . . . . . . . . . . . . . 37Deleting Nuisance Modes . . . . . . . . . . 38Viewing a Scan List . . . . . . . . . . . . . . . 38Programming a Scan List . . . . . . . . . . 39 Trunked Features . . . . . . . . . . . . . . . . . . 41 Viewing Your Radio’s ID Number. . . . . . . 41Enhanced Private Call Operation. . . . . . . 41Answering a Private Call. . . . . . . . . . . 42Making a Private Call . . . . . . . . . . . . . 43Call Alert™ Operation . . . . . . . . . . . . . . . 46Answering a Call Alert™ Page with a Group Call . . . . . . . . . . . . . . . . . . . . 46Making a Call Alert™ . . . . . . . . . . . . . 46Initiating a Call Alert . . . . . . . . . . . . . . 46Sending the Call Alert . . . . . . . . . . . . . 48Programming the Radio’s Lists . . . . . . . . 49Programming the Telephone ListNumbers . . . . . . . . . . . . . . . . . . . . . . . 49Programming the Call List. . . . . . . . . . 50Trunked Telephone Operation . . . . . . . . . 52Answering a Telephone Call. . . . . . . . 52Making a Telephone Call . . . . . . . . . . 53Automatic Multiple Site Selection (AMSS) (PRO7650 Only). . . . . . . . . . . . . . . . . . . . 56Forcing a Site Change . . . . . . . . . . . . 56Locking and Unlocking a Site . . . . . . . 56 Conventional Call. . . . . . . . . . . . . . . . . . 57 Selecting a Conventional Channel. . . . . . 57Sending a Conventional Call . . . . . . . . . . 57Repeater or Talkaround Mode . . . . . . . . . 57Smart PTT . . . . . . . . . . . . . . . . . . . . . . . . 58
3 EnglishCONTENTSWarranty. . . . . . . . . . . . . . . . . . . . . . . . . . 59 Limited Warranty. . . . . . . . . . . . . . . . . . . . 59 Accessories. . . . . . . . . . . . . . . . . . . . . . . 65 Carry Cases . . . . . . . . . . . . . . . . . . . . . . . 65Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . 65Headsets. . . . . . . . . . . . . . . . . . . . . . . . . . 65Remote Speaker Microphones . . . . . . . . . 66Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . 66Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 66Miscellaneous . . . . . . . . . . . . . . . . . . . . . . 66Antennas. . . . . . . . . . . . . . . . . . . . . . . . . . 67 COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and oth-er countries preserve for Motorola certain ex-clusive rights for copyrighted computer programs, including, but not limited to, the ex-clusive right to copy or reproduce in any form the copyrighted computer program. According-ly, any copyrighted Motorola computer pro-grams contained in the Motorola products described in this manual may not be copied, re-produced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implica-tion, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product.
4 EnglishCONTENTSNotes
5 EnglishSAFETY SAFETY AND GENERAL INFORMATION IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATIONREAD THIS INFORMATION BEFORE USING YOUR MOTOROLA TWO-WAY RADIO The information provided in this document supersedes the general safety information contained in user guides published prior to July 2000. For information regarding radio use and hazardous atmosphere please refer to the Factory Mutual (FM) Approval Manual Supplement or Instruction Card, which is included with radio models that offer this capability. RF Operational Characteristics Your radio contains a transmitter and a receiver. When it is ON, it receives and transmits radio frequency (RF) energy. Exposure To Radio Frequency Energy Your Motorola Two-Way Radio, is designed to comply with the following National and International Standards and Guidelines regarding exposure of human beings to radio frequency electromagnetic energy: (EME)• United States Federal Communications Commission, Code of Federal Regulations (47 CFR part 2 sub-part J)• American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) (C95.1 - 1992)• Institute of Electrical and Electronic Engineers (IEEE) (C95.1-1999 Edition)• National Council on Radiation Protection and Measurements (NCRP) of the United States (Report 86, 1986)• International Commission on Non-Ionizing Radiation Protection (ICNRP - 1998)• National Radiological Protection Board of the United Kingdom (1995)• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to S SAFETY
6 EnglishSAFETY Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz (1999)• Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard (1999) (applicable to wireless phones only) PORTABLE RADIO OPERATION AND EME EXPOSURE To assure optimal radio performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures: Antenna CareUse only the supplied or an approved replacement antenna . Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. DO NOT hold the antenna when the two-way radio is "IN USE". Holding the antenna affects call quality and may cause the radio to operate at a higher power level than needed. Two-Way Radio Operation When using your radio as a traditional two-way radio, hold the radio in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.Body-Worn Operation To maintain compliance with FCC RF exposure guidelines, if you wear a radio on your body when transmitting, always place the radio in a Motorola approved clip, holder, holster, case, or body harness for this product . Use of non-Motorola-approved accessories may exceed FCC RF exposure guidelines. If you do not use a Motorola approved body-worn accessory and are not using the radio in the intended use positions along side of the head in the phone mode or in front of the face in the two-way radio mode, then ensure the antenna and radio is kept the following minimum distances from the body when transmitting:MAN WITH RADIO
7 EnglishSAFETY• Phone or Two-way radio mode: one inch (2.5 cm) • Data operation using any data feature with or without an accessory cable: one inch (2.5 cm) Approved Accessories For a list of approved Motorola accessories look in the appendix or accessory section of this manual. ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise con-figured for electromagnetic compatibil-ity.• FACILITIES To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. • AIRCRAFT When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. • MEDICAL DEVICES • Pacemakers The Health Industry Manufacturers Association recommends that a mini-mum separation of 6 inches (15 centimeters) be maintained between a handheld wireless radio and a pace-maker.These recommendations are consistent with the independent research by, and recommendations of, Wireless Technology Research.Persons with pacemakers should:• ALWAYS keep the radio more than six inches (15 centimeters) from their pacemaker when the radio is turned ON.
8 EnglishSAFETY • not carry the radio in the breast pocket.• use the ear opposite the pacemaker to minimize the potential for interference.• turn the radio OFF immediately if you have any reason to suspect that interference is taking place. • Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. • Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. SAFETY AND GENERAL • Use While Driving Check the laws and regulations on the use of radios in the area where you drive. Always obey themWhen using your radio while driving, please:• Give full attention to driving and to the road.• Use hands-free operation, if available.• Pull off the road and park before making or answering a call if driving conditions so require. OPERATIONAL WARNINGS • FOR VEHICLES WITH AN AIR BAG Do not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle.!W A R N I N G!
9 EnglishSAFETY• POTENTIALLY EXPLOSIVE ATMOSPHERES Turn off your radio prior to entering any area with a potentially explosive atmosphere, unless it is a radio type especially qualified for use in such areas as "Intrinsically Safe" (for example, Factory Mutual, CSA, or UL Approved). Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or stor-age facilities, areas where the air con-tains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explo-sive atmospheres are often but not always posted. • BLASTING CAPS AND AREAS To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: "Turn off two-way radio". Obey all signs and instructions. OPERATIONAL CAUTIONS • ANTENNASDo not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. • BATTERIES All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.!C a u t i o n
10 EnglishSAFETY INTRINSICALLY SAFE RADIO INFORMATION FMRC Approved Equipment Anyone intending to use a radio in a location where hazardous concentrations of flammable material exist (hazardous atmosphere) is advised to become familiar with the subject of intrinsic safety and with the National Electric Code NFPA 70 (National Fire Protection Association) Article 500 (hazardous [classified] locations).An Approval Guide, issued by Factory Mutual Research Corporation (FMRC), lists manufacturers and the products approved by FMRC for use in such locations. FMRC has also issued a voluntary approval standard for repair service (“Class Number 3605”).FMRC Approval labels are attached to the radio to identify the unit as being FM Approved for specified hazardous atmospheres. This label specifies the hazardous Class/Division/Group along with the part number of the battery that must be used. Depending on the design of the portable unit, this FM label can be found on the back or the bottom of the radio housing. The FM Approval mark is shown below: WARNINGS • Do not operate radio communications equipment in a hazardous atmosphere unless it is a type especially qualified for such use (e.g., FMRC Approved). An explosion or fire may result.• Do not operate an FMRC Approved Product in a hazardous atmosphere if it has been physically damaged (e.g., cracked housing). An explosion or fire may result.• Do not replace or charge batteries in a hazardous atmosphere. Contact sparking may occur while installing or removing batteries and cause an explosion or fire. WARNINGS • Do not replace or change accessories in a hazardous atmosphere. Contact sparking FMAPPROVED!W A R N I N G!!W A R N I N G!
11 EnglishSAFETY may occur while installing or removing accessories and cause an explosion or fire.• Do not operate an FMRC Approved Product unit in a hazardous location with the accessory contacts exposed. Keep the connector cover in place when accessories are not used.• Turn a radio off before removing or installing a battery or accessory.• Do not disassemble an FMRC Approved Product unit in any way that exposes the internal electrical circuits of the unit.Radios must ship from the Motorola manufacturing facility with the hazardous atmosphere capability and FM Approval labeling. Radios will not be “upgraded” to this capability and labeled in the field.A modification changes the unit’s hardware from its original design configuration. Modifications can only be made by the original product manufacturer at one of its FMRC-audited manufacturing facilities. WARNINGS • Failure to use an FMRC Approved Product unit with an FMRC Approved battery or FMRC Approved accessories specifically approved for that product may result in the dangerously unsafe condition of an unap-proved radio combination being used in a hazardous location.• Unauthorized or incorrect modification of an FMRC Approved Product unit will negate the Approval rating of the product. Repair of FMRC Approved Products REPAIRS FOR MOTOROLA PRODUCTS WITH FMRC APPROVAL ARE THE RESPONSIBILITY OF THE USER.You should not repair or relabel any Motorola- manufactured communication equipment bearing the FMRC Approval label (“FMRC Approved Product”) unless you are familiar with the current FMRC Approval standard for repairs and service (“Class Number 3605”).You may want to consider using a repair facility that operates under 3605 repair service approval.!W A R N I N G!
12 EnglishSAFETY WARNINGS • Incorrect repair or relabeling of any FMRC Approved Product unit could adversely affect the Approval rating of the unit.• Use of a radio that is not intrinsically safe in a hazardous atmosphere could result in serious injury or death.FMRC’s Approval Standard Class Number 3605 is subject to change at any time without notice to you, so you may want to obtain a current copy of 3605 from FMRC. Per the December 1994 publication of 3605, some key definitions and service requirements are as follows: Repair A repair constitutes something done internally to the unit that would bring it back to its original condition—Approved by FMRC. A repair should be done in an FMRC Approved facility.Items not considered as repairs are those in which an action is performed on a unit which does not require the outer casing of the unit to be opened in a manner which exposes the internal electrical circuits of the unit. You do not have to be an FMRC Approved Repair Facility to perform these actions. Relabeling The repair facility shall have a method by which the replacement of FMRC Approval labels are controlled to ensure that any relabeling is limited to units that were originally shipped from the Manufacturer with an FM Approval label in place. FMRC Approval labels shall not be stocked by the repair facility. An FMRC Approval label shall be ordered from the original manufacturer, as needed, to repair a specific unit. Replacement labels may be obtained and applied by the repair facility, provided there is satisfactory evidence that the unit being relabeled was originally an FMRC Approved unit. Verification may include, but is not limited to: a unit with a damaged Approval label, a unit with a defective housing displaying an Approval label, or a customer invoice indicating the serial number of the unit and purchase of an FMRC Approved model.!W A R N I N G!
13 EnglishSAFETY Do Not Substitute Options or Accessories The Motorola communications equipment certified by Factory Mutual is tested as a system and consists of the FM Approved portable, FM Approved battery, and FM Approved accessories or options, or both. This FM Approved portable and battery combination must be strictly observed. There must be no substitution of items, even if the substitute has been previously Approved with a different Motorola communications equipment unit. Approved configurations are listed in the FM Approval Guide published by FMRC, or in the product FM Supplement. This FM Supplement is shipped from the manufacturer with the FM Approved radio and battery combination. The Approval Guide, or the Approval Standard Class Number 3605 document for repairs and service, can be ordered directly from Factory Mutual Research Corporation located in Norwood, Massachusetts.
14 EnglishSAFETY Notes
15 EnglishRADIO OVERVIEW RADIO OVERVIEW PARTS OF THE RADIO PRO7550 ™ and PRO7650 ™ Models(programmable)Side Button 1 (A) (programmable) Side Button 3 (C)(programmable)Top Button (D) Keypad Front Buttons Mode Selector Knob ButtonPush-to-Talk (PTT)On/Off/Volume KnobLED Indicator(programmable) Side Button 2 (B)Microphone (Select Key)SideConnectorCover SideConnectorCover
16 EnglishRADIO OVERVIEWOn/Off/Volume Knob Turns the radio on or off, and adjusts the radio’s volume. Mode Selector Knob Selects the required operation mode. LED Indicator Indicates status of battery (see page 26); or (see table below) power-up, scan, or receipt of a radio selective call: Push-to-Talk (PTT) Button Press and hold down this button to talk; release it to listen. Microphone When sending a message, hold the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth, and speak clearly into the microphone. Keypad Keys With PTT switch pressed (radio transmitting) Steady red Radio is transmitting ( PTT button pressed)LED unlit Radio is not transmittingFlashing red Low battery (conventional mode only; programmable from the CPS)Momentary green Radio has powered-up success-fullyAmber In Permanent Monitor (Conven-tional only) With PTT Released (radio receiving) Blinking red light* Mode busy (conventional mode only)Blinking green light Receipt of a telephone call, Private Conversation call, or Call Alert page123456789*0#
17 EnglishRADIO OVERVIEW These keys are used for: • dialing a phone number. • entering a specific radio ID number when mak-ing a private or Call Alert radio call The following table shows the character cycle for each key, when entering information for programming the radio’s lists. Note: The sequence in the table above is valid when entering information on a blank dis-play. However, when editing existing infor-mation, the above sequence may differ. For instance, if the last character entered is a “ R ”, pressing 7 to enter the next char-acter, would start the character cycle at “S” and NOT at “P”. After the button rolls over from the number, alpha charac-ters are displayed again but in lower case letters. Key Number of Times the Key is Pressed123456 0 0 1 1 Blank space 2 ABC2 3 DEF3 4 GH I4 5 JKL5 6 MNO6 7 PQRS7 8 TUV8 9 WXYZ9 * * # #-+./\
18 EnglishRADIO OVERVIEW • When editing existing information, pressing 1 would ALWAYS start the character cycle at the “ blank space ” and NOT at “1”.Menu KeysSelecting a FeatureA unique feature of your radio is its use of the display to give you quick access to many of the radio’s features without having to have a dedicated key for each feature.The names of the features (CALL, MUTE, etc.) are shown on the display, three at a time. Selection of features is controlled by the three keys directly below the feature names: the left key controls the left feature, the middle key controls the middle feature, and the right key controls the right feature.Softkeys (l;l)When already in Menu Mode, these keys are used to make Menu selections.Left and Right Arrow Keys (,/)The left and right arrow keys are used to scroll the display forward or backward through the radio’s features and lists. There is no end point to the list, so if you continue to scroll in one direction, the display will “wrap around” back to the beginning of the list. If you hold either key down, the display will scroll at a faster rate until the key is released.The left arrow key is also used for editing when you are entering information manually from the keypad.Pressing the left arrow key, when editing numeric information (such as telephone numbers), will backspace, and erase the display, one character at a time. If you have erased all the digits, an additional press of the left arrow key will return the display to the pre-programmed list.Pressing the left arrow key, when editing alphabetic information (such as member’s names), will move the cursor one step to the left.l;l,./Softkey 1 Softkey 3Left Home RightSoftkey 2
19EnglishRADIO OVERVIEWHOME Key (.)The HOME key will always return you to the home (default) display. In most cases, this is the current mode. In addition, if you are using a feature that requires it, pressing the HOME key will also cause information to be saved in memory before going to the home display. Some radio features will automatically go to the home display when they are completed, without having to press the HOME key, thus reducing the number of key presses required.Menu DisplayThe menu items can be displayed in normal video or in reversed video (programmable through the CPS). All the menu items in the examples in this manual are shown in reversed video.The order in which the menu items are displayed is programmable. Thus, the order of the menu items on your radio may differ from those shown here in this manual. In such a situation, press the relevant softkey to make your menu selections. All descriptions of functions and displays after the selection are valid.LCD Screen and IconsDisplays mode selected, channel, menu, and radio status information. The top two screen rows show radio status indicator symbols, explained in the following table.Symbol Name and DescriptionAXPAND™ IndicatorIndicates that your radio has the com-panding feature activated.BPower Level IndicatorR lights up when your radio is config-ured to transmit in Low Power. S lights up when your radio is configured to transmit in High Power. A B C F G J“K P
20EnglishRADIO OVERVIEWAlert Tone IndicationsYour radio generates a number of audible tones to indicate radio operating conditions:• Low Battery – A low-battery condition is indi-cated by a high-pitched, cricket-like “chirp-chirp” when the PTT button is released following a transmission.• Successful Power-Up – A short, medium-pitched tone when the radio is first turned on indicates that the radio has passed its power-up self test and is ready for use.CCarrier Squelch IndicatorIndicates when the active conventional mode is being monitored in the carrier squelch mode;ON = BEING MONITORED/OFF = NOT BEING MONITORED.FCall ReceivedFlashes when a call or page is received.GScan IndicatorIndicates when the radio is scanning;ON = SCANNING/OFF =NOT SCAN-NING.JDirectIndicates whether you are talking directly to another radio (talkaround), or through a repeater;ON = DIRECTOFF = REPEATER.Symbol Name and DescriptionKProgramming/Viewing Mode Indicates when the radio is in the pro-gramming or viewing mode;ON = IN VIEWING MODEBLINKING = IN PROGRAMMING MODE.PBattery Level IndicatorShows the remaining charge in your battery, based on how many bars are displayed.Flashing, indicates flat battery.Symbol Name and Description
21EnglishRADIO OVERVIEW• Unsuccessful Power-Up – A short, low-pitched tone when the radio is first turned on indicates that the radio has failed its power-up self test and is not ready for use. Contact your service representative for service.• Transmit on Receive-Only Mode – If you press the PTT button while tuned to a “receive-only” mode, you will hear a continuous, low-pitched alert tone, indicating that no transmission is pos-sible on this mode. This tone will continue until the PTT button is released.• Transmit Inhibit on Busy Mode – If you press the PTT button while the mode is busy, you will hear a continuous, low-pitched alert tone, indicating that no transmission is possible on this mode. This tone will continue until the PTT button is released.• Transmit Inhibit on Flat Battery – If you press the PTT button while the battery is flat, you will hear a continuous, low pitched alert tone, indicating that transmission is impossible.• Invalid Mode – A continuous, low-pitched tone is heard when an invalid or unprogrammed opera-tion is attempted on the radio.• Valid (Good) Key Press – A short, medium-pitched tone when a keypad key is pressed indi-cates that the key press was accepted.• Invalid (Bad) Key Press – A short, low-pitched tone when a keypad key is pressed indicates that the key press was rejected.• Failsoft (Trunked Systems Only) – A faint “beep-ing” tone every ten seconds indicates that the radio is operating in the failsoft mode.• Time-Out Timer Warning – Your radio’s time-out timer limits the length of your transmission time. When you are pressing the PTT button (trans-mitting), a short, low-pitched warning tone will sound four seconds before the allotted time will expire.• Time-Out Timer Timed-Out – If you hold down the PTT button longer than the time-out timer’s allotted time, a continuous, low-pitched tone will sound, indicating that your transmission has been cut off. This tone will continue until the PTT button is released.• Phone Busy – A “bah-bah-bah-bah” tone when telephone interconnect is accessed indicates that all available modes are busy and the radio is in queue for the next available phone line.• Call Alert™ (Page) Received – A group of four medium-pitched tones every five seconds indi-cates that your radio has received a Call Alert page.
22EnglishRADIO OVERVIEW• Call Alert™ (Page) Sent – A single medium-pitched tone (central acknowledge), followed by a group of four medium-pitched tones indicates that a Call Alert page sent by your radio has been received by the target radio.• Private Conversation™ Call Received – A group of two medium-pitched tones indicates that your radio has received a Private Conversation call. This sequence is repeated every five seconds for approximately 20 seconds for enhanced Pri-vate Conversation.• Trunked System Busy (Trunked Systems Only) – A “bah-bah-bah-bah” tone when a trunked sys-tem is accessed indicates that all available chan-nels are busy and the radio is in queue for the next available channel.• Call Back (Trunked Systems Only) – A group of three medium-pitched tones (di-di-dit) indicates that a talkgroup is now available for your previ-ously requested transmission.Programmable ButtonsSeveral of your radio’s buttons can be programmed by your dealer as shortcuts to many of the radio’s features.Check with your dealer for a complete list of functions your radio supports.Programmable buttons include:• The three Side Buttons (A, B, C) and the Top Button (D)• On keypad radios only, the three Front Buttons (P1, P2, P3)Each button can access up to two features, depending on the type of button press:•short press—quickly pressing and releasing the programmable buttons, or•long press—pressing and holding the programmable buttons for a period of time (pro-grammable for 1/2 to 16 seconds), or •hold down—pressing and holding down the pro-grammable buttons while checking status or making adjustments.The following table summarizes the programmable features available.In the “Button” column, have your dealer write down the programmable buttons next to the features that have been programmed to them.Use the abbreviations (e.g., A for Side Button 1, D for Top Button, etc.) shown in the radio illustration at the front of this manual.Also, where a choice exists, have your dealer indicate whether the button press is short press (SP) or long press (LP).
23EnglishRADIO OVERVIEWCheck with your dealer for a complete list of features your radio supports. Button Short Press Long Press Hold DownMonitor/Perma-nent Monitor Temporarily monitors the selected channel for any activity. Continually monitors the selected channel. Monitors the selected channel for any activity.Volume Set — — Sounds a tone for adjusting the radio’s vol-ume level.Scan Toggles between the start/stop of the Scan operation. ——Nuisance Delete Temporarily deletes an unwanted active scan member. ——Search Makes a system search.Light Turns on/off your radio’s back-light. ——Call Enters or exits a Private call.Page Enters or exits a Call Alert.Call Response Respond to or exit from a Private Call or Call Alert. ——Phone Enters or leaves Phone mode. — —
24EnglishRADIO OVERVIEWTRUNKED RADIO SYSTEMSPRO7550 and PRO7650 radios can operate on both Privacy Plus™ trunked and conventional radio systems. Conventional typically refers to radio-to-radio communication, sometimes through a repeater.A trunked radio system allows a large number of users to share a relatively small number of frequencies without interfering with each other. The air time of all the repeaters in the trunked system is pooled, which maximizes the amount of air time available to any one radio, and minimizes channel congestion. Some of the benefits of trunked two-way radio systems are:• No channel monitoring required prior to trans-mission.• Improved system access.• Automatic channel selection.• Increased privacy among members of the same group.• Only one attempt is required to access the sys-tem. If all channels are busy, the call request enters a queue and the central controller auto-matically assigns the next available channel. Two (2) medium-pitched tones followed by one (1) high-pitched tone sounds when the call can be made.
25EnglishGETTING STARTEDGETTING STARTEDBATTERY INFORMATIONCharging the BatteryIf a battery is new, or its charge level is very low, you will need to charge it before you can use it.Note: Batteries are shipped uncharged from the factory. Always charge a new battery 14 to 16 hours before initial use, regardless of the status indicated by the charger.To charge the batteryPlace the battery, with or without the radio, in the charger. The charger LED indicates the charging progress:LED Color StatusNo LED Indication Battery inserted incorrectly.Single Green Flash Successful charger power-up.Flashing Red* Battery unchargeable or not making proper contact.Steady Red Battery in rapid-charge mode.Flashing Yellow Battery in charger, not in rapid-charge mode but waiting to be charged.Flashing Green† Battery 90% (or more) charged.Steady Green Battery fully charged.* Remove the battery from the charger. Clean battery contacts with isopropyl alcohol applied to a soft cloth. Place the battery back in the charger. If the LED indicator continues to flash red, replace the battery.† A standard battery may require one hour to charge to 90%.LED Color Status
26EnglishGETTING STARTEDBattery Charge StatusIf programmed by your dealer, you can check your battery’s charge status by holding down the preprogrammed Battery Gauge button. The charge status is shown by the color of the radio’s LED indicator.Battery chargers will only charge the Motorola-authorized batteries listed below; other batteries may not charge.Battery Level LED IndicatorHigh GreenSufficient YellowLow Flashing redVery Low NonePart No. DescriptionHNN9008 High-Capacity/NiMHHNN9009 Ultra-High-Capacity/NiMHHNN9010 Ultra-High-Capacity/Factory Mutual/NiMHHNN9011 High-Capacity/Factory Mutual/NiCdHNN9012 High-Capacity/NiCdHNN9013 High-Capacity/Lithium-Ion
27EnglishGETTING STARTEDAttaching the Battery Removing the Battery1Fit the extensions at the bottom of the bat-tery into the bottom slots on the radio.2Press the top part of the battery toward the radio until you hear a click.121Turn off the radio (see page 30).2Slide both battery latches downward.3Pull the top part of the battery away from the radio. 32 Battery Latches
28EnglishGETTING STARTEDACCESSORY INFORMATIONAttaching the Antenna Removing the Antenna1 Turn the antenna clockwise to attach it. 1Turn the antenna counterclockwise to remove it.
29EnglishGETTING STARTEDAttaching the Belt Clip Removing the Belt Clip1Align the grooves of the belt clip with those of the battery.2Press the belt clip downward until you hear a click.1Use a key to press the belt clip tab away from the battery.2Slide the belt clip upward to remove it. 21Belt Clip Tab
30EnglishGETTING STARTEDAttaching the Side Connector Cover Turning The Radio On or OffRECEIVING A TRUNKED CALL1Place the loop (attached to the side con-nector cover) over the antenna; then slide it downward until it touches the top of the radio.2Insert the tab on the top of the cover into the slot above the connector.3Position the cover over the connector and align the thumbscrew with the threaded hole in the radio.4Tighten the thumbscrew to hold the cover in place. Do not overtighten the thumbscrew.LoopSlotThumbscrew Antenna1Turn your radio on.2Adjust your radio’s volume.3Use the Mode Selector knob to select the desired trunked talkgroup.• Make sure the PTT button is released.4Listen for voice activity. The LED indicator flashes green when your radio is receiving.ON OFF
31EnglishGETTING STARTEDRADIO SELF TESTTurn the radio on by rotating the volume control clockwise. The radio goes through a power-up self check and, if it passes the check, the display momentarily shows “SELF TEST.” A good-power-up, high-pitched tone sounds to indicate that the radio has passed the self check.If the radio fails the self check, the display shows “ERROR XX/XX” (where XX/XX is an alphanumeric error code), accompanied by a bad-power-up, low-pitched tone. Turn the radio off, check the battery, and turn the radio back on. If the radio still does not pass the self check, a problem exists in the radio. Contact your nearest Motorola Service Shop.Note: The power-up self check verifies that theradio’s microprocessor-based systems areworking, but it does not check all of the rfcomponents, nor does it check the opera-tion of all customer-specific features.Motorola recommends that the functional-ity of the radio be periodically checked byan authorized Motorola service shop.
32EnglishGETTING STARTEDNotes
33EnglishRADIO CALLS ( TRUNKED RADIO CALLS ( TRUNKED OPERATION ONLY)This section outlines the basic functions of your radio. All references to what is shown on the display is only valid for PRO7550/PRO7650 radios. Throughout this section, the display belowis used to indicate the radio’s home display.SELECTING A ZONE AND MODEA mode is a channel or talkgroup and all the features that are programmed to it. A zone is a grouping of modes that is selected using the menu keys. Before you use your radio to receive or send messages, you should first select the desired zone and mode.Selecting a ZonePLANT POLICE1/ until ZONE is displayed.2l (the softkey below ZONE). The current zone name blinks on the display.For example3 / until the desired zone name is displayed.—or—Enter the number of the desired zone.For example4 .5The displayed zone is the new selected zoneZONE MUTE CALL PLANT POLICECITY POLICECITY POLICE
34EnglishRADIO CALLS ( TRUNKED Selecting a ModeRECEIVING A CALLMAKING A CALLConventional ModesNote: Do not interrupt another user. If the presentmode is programmed to receive PL, ensurethat the mode is not in use by pressing themonitor button to listen for activity.• If the mode-busy feature is enabled, a blinking red LED on receive (PTT switch released) indicates that the mode is cur-rently busy.• If a mode is programmed for receive only, any attempt to transmit on that mode will cause an invalid-mode tone to sound until the PTT switch is released.1Turn the Mode Selector knob to the desired mode.2The display shows the selected mode’s name.For example3If the selected mode is unprogrammed, an invalid-mode tone is heard until a valid programmed mode is selected.1Turn the radio on and select the desired zone and mode (see Selecting a Zone and Mode).2Your radio is now set to receive calls on the selected mode.PLANT MODE 1UNPROGRAMMED1Turn the radio on and select the desired conventional zone and mode (see Selecting a Zone and Mode).2Press and hold the PTT switch on the side of the radio and speak slowly and clearly into the microphone area. The red LED lights continuously when the radio is trans-mitting.3When you have finished talking, release the PTT switch to listen.
35EnglishRADIO CALLS ( TRUNKED Trunked Modes• If you hear a busy signal (a low-frequency “bah-bah-bah-bah”), release the PTT switch and wait for a call-back tone (sounds like “di-di-dit”). When you hear the call-back tone you will have three seconds to press the PTT switch. This allows you to make another call without getting a busy signal.• If a continuous talk-prohibit tone is heard when the PTT switch is pressed, transmission is not possible. The radio may be out of range.Low-Battery AlertYour radio emits an alert tone when a low-battery condition is detected.Coded Squelch OperationTone Private-Line® (PL), Digital Private-Line™ (DPL), and carrier squelch operation are all available in your radio, on a per-mode basis.When in carrier squelch operation, all traffic on the mode is heard. When in PL or DPL operation, your radio responds to only those messages intended for you. When this feature is mode-slaved, PL, DPL, or carrier squelch is programmed to each mode.Whenever the radio is operating in carrier squelch, the display will show C.Variable RF Power Level (Selected Models Only)Radios can have more than one power level. High power can be programmed on modes where high power is permitted, and low power can be programmed on all other modes. The high-/low-power feature can be selected via the menu keys.FAILSOFT OPERATION (TRUNKED SYSTEMS ONLY)The “failsoft” system ensures continual radio communications capability during a trunked system failure. Your radio will automatically go into failsoft operation, if the central trunking controller fails for any reason. While in failsoft operation, your radio will transmit and receive on a predetermined frequency 1Turn the radio on and select the desired trunked zone and mode (see Selecting a Zone and Mode).2 Press and hold the PTT switch on the side of the radio and speak slowly and clearly into the microphone area. The red LED lights when the radio is transmitting. When you have finished talking, release the PTT switch to listen.
36EnglishRADIO CALLS ( TRUNKED on a conventional mode. When the trunked system returns to normal operation, the radio will automatically leave the failsoft operation and return to trunked operation.During failsoft operation,MUTING THE KEYPAD TONESThe radio’s keypad tones, normally heard each time a keypad key is pressed, can be turned off (muted) or on (unmuted) at your discretion. To use the keypad mute feature:Note: Pressing . or the PTT switch will exit this menu without changing the mute selection.1You will hear a faint “beeping” sound every ten seconds.Alternates betweenand2Your radio becomes unsquelched.1 / until MUTE is displayed.FAILSOFTPLANT POLICEZONE MUTE CALL 2Press the softkey below the desired mute state (on or off). The radio returns to the home display.3; (the softkey below MUTE). You will see the cur-rent mute state momentarilyorThenPLANT POLICETONES ONTONES OFFON OFF
37EnglishSCANSCANThis section outlines the scan functions of your radio. All references to what is shown on the display is only valid for PRO7550/PRO7650 radios. Throughout this section, the display belowis used to indicate the radio’s home display.SCAN OPERATIONThe scan feature allows you to monitor activity on different conventional or trunked modes by scanning a scan list of modes. This list can be programmed with the Customer Programming Software (CPS) or user programmable.The table below lists the types of scan operations available depending on radio model.Automatic scanning (autoscan) can be programmed through the CPS. If autoscan is enabled for a mode, your radio begins scanning, using the mode’s scan list, whenever you select that mode. The radio will continue autoscanning until you select a mode that does not have autoscan enabled.Turning Scan On or Off with the Keypad)Conventional Comprises Conventional-Only Modes.Talkgroup ScanComprises conventional modes and trunked modes from more than one trunking system.PLANT POLICE1/ until SCAN is displayed.2; (the softkey below SCAN). You will see the cur-rent scan state momentarily.orThenPHON SCAN CALL SCAN ONSCAN OFF ON OFF
38EnglishSCANNote: The scan status annunciator, G, is dis-played when the scan operation is active. It will be removed from the display when the scan operation is terminated.Deleting Nuisance ModesWhen the radio scans to a mode you do not wish to monitor (nuisance mode), you can temporarily delete that mode from the scan list.Viewing a Scan ListThe view scan list feature allows you to view the members of the scan list associated with the currently selected mode.To view a scan list3Press the softkey below the desired scan state (on or off). The radio returns to the home display.1When your radio is locked on the mode to be deleted, press the nuisance-mode delete button (programmed via the CPS).2A valid-keypress chirp is heard, indicating that the mode has been deleted.3The radio continues scanning the remaining modes in the list.4To resume scanning the deleted mode, you must leave and reenter scan operation.PLANT POLICE1/ until VIEW is displayed.2 l (the softkey below VIEW).3; (the softkey below SCAN). The display shows the first member of the scan list.For example4Every subsequent press of / will scroll through subsequent members of the scan list.5To leave the scan list feature, press the HOME key, or the PTT button, or turn the mode selector knob.6The radio returns to the home display.PAGE STS VIEW PHON SCAN CALL FIRE DEPPLANT POLICE
39EnglishSCANNote: The programming-mode annunciator, K, is displayed while list view mode is active.• The scan status annunciator, G, appears, indicating that a scan list is being viewed.Programming a Scan ListThe program scan list feature allows you to program the members of the scan list associated with the currently selected mode.To program a scan listNote: The programming-mode annunciator, K, blinks while program mode is active.1/ until PROG is displayed.2l (the softkey below PROG).3l (the softkey below SCAN). The display shows the current mode selected.For example4Use the mode selector knob to select the required talkgroup zone.PROG SCAN PHON CALL FIRE DEPT5, or / to select the required zone. If the scan status annunciator G is displayed, the mode is part of the scan list.6Press the select key to enable or disable the scan mode.7After making all the changes, select the required operating mode.8Press the HOME key, or the PTT button, or turn the mode selector knob to commit all the changes made.
40EnglishSCANNotes
41EnglishTRUNKED FEATURESTRUNKED FEATURESThis section outlines the trunked features of your radio. All references to what is shown on the display is only valid for PRO7550/PRO7650 radios. Throughout this section, the display belowis used to indicate the radio’s home display.VIEWING YOUR RADIO’S ID NUMBERTo view your radio’s ID number:Note: If your radio has been so programmed, you can press the call button for quick access to viewing your radio’s ID number. This takes you directly to step 3.ENHANCED PRIVATE CALL OPERATIONThe Enhanced Private Conversation feature not only allows you to have a conversation that is heard only by the two parties involved, but also enables you to determine whether the radio that you are calling is in service. The radio being called can also view the calling radio's ID number before answering. You can then choose whether or not to leave your radio’s ID number (via a Call Alert page) with the radio you are calling so that you may be called back. Enhanced Private Conversation operation is similar to telephone operation.1 / until CALL is dis-played.2l (the softkey below CALL).3The display shows the last ID number transmit-ted or received.4,.5The display shows your radio’s ID number.PLANT POLICE ZONE MUTE CALL ID: 722588my id 7413176. to return the radio to the home display.
42EnglishTRUNKED FEATURESAnswering a Private CallNote: If you press the PTT button before you press the call response button, the response will be transmitted to everyone in the talkgroup (a dispatch mode operation).• After answering a Private Call, the caller’s ID number is stored in your radio as the “last ID number received”.• If your radio is configured for Private Call II, upon receiving a Private Conversation call, two alert tones sounds, followed by the received voice.1Upon receiving a Private Conversation call, two alert tones sounds (repeating every five seconds for 20 sec-onds).Alternates betweenand2The green LED and call received status annunciator, F, will blink indicating that a call is being received. You have 20 seconds to answer the call before the radio automatically returns to the home display.3Press the call response button or the call but-ton.4The display shows the incoming caller’s ID number, and the call received annunciator will turn off.5After viewing the caller’s ID number, you can decide to either talk privately (go to next step), or not answer the call by pressing the call response or call button to return to the home display.CALLPLANT POLICEID: 7225886If you decide to answer the call, press the PTT button.7The caller’s ID number remains displayed for the duration of the call.8When finished with conversation, press . or the call response button to hang up.9The radio will return to the home display.ID: 722588PLANT POLICE
43EnglishTRUNKED FEATURESMaking a Private CallThere are four phases in making a private call, namely:• initiating a private call,• entering the desired radio ID number,• sending the radio ID number, and• having the conversation and hanging-up.Initiating a Private CallEntering the Desired Radio ID NumberIf the last ID number called is the desired number, go directly to step 5.To enter a new numberNote: Exactly six digits must be entered for the radio ID number. If fewer than six digits were entered, you will hear a bad-keypress tone and the display will show “INVALID ENTRY” when attempting to send the radio ID number. A bad-keypress tone will also be heard if you try to enter a seventh digit.• Once you have started entering numbers, the , key functions as a backspace key. Press-ing it causes the last digit entered to be erased, and the cursor moves to the left. When the last digit is erased, an additional press of this key causes the last member of the preprogrammed call list to be displayed; pressing / shows the first member of the list.To enter a number from a location in the call list1/ until CALL is dis-played.2l (the softkey below CALL).3The display shows the last ID number transmit-ted or received.4a Enter the new six-digit ID number using the keypad. ZONE MUTE CALL ID: 7225884b On the display, the old ID number disappears and the new digits appear as they are being entered.4c The cursor flashes indicating the location of the next number to be entered4a, or / to enter the call list.4b Enter the first digit of the location number. If there are fewer than 10 members in the list, go directly to step 4e.
44EnglishTRUNKED FEATURESNote: The last member of the list is also the “last ID transmitted or received” at position “00” on the list.• If you enter a location number that does not exist (for example, “15”), the display will show “INVALID ENTRY,” and the radio will sound an invalid-keypress tone and return back to step 4b of this procedure.Sending the Radio ID NumberNote: If the radio you are calling is not in service, you will not hear the ringing and the display will show “NO ACKNOWLELDGE”. Go to step 10 to hang up.• If your radio is configured for Private Call II, you will not hear the telephone type ring-ing. Instead you are able to proceed to talk to the Called party.4c If there are 10 or more members in the list, the display shows “ID LOC#X_” (where X is the first digit). The cursor blinks to show the location of the second digit.4d Enter the second digit of the location number.4eThe radio goes to that position in the list. The display alternates between showing the member’s name and ID number.Alternates betweenandGILBERTOID: 7841165Press the PTT button to transmit the ID num-ber.6If the radio you are calling is on the air, you will hear a telephone-type ringing for 20 sec-onds, or until the called radio answers the call.7If the party you are call-ing does not answer the call within twenty sec-onds, the telephone ringing stops and an alert tone sounds.At this point you can either send a Call Alert™ page, or go to step 10 to hang up.8If the party you are calling answers the call, you will hear his/her voice.NO ANSWER
45EnglishTRUNKED FEATURESHaving the Conversation and Hanging-upNote: Once engaged in a private conversation, if the radio is left idle for more than one minute, a momentary warning alert sounds every six seconds to remind you that dis-patch calls are not being heard. After two minutes, a permanent invalid mode tone sounds.Leaving a Call Alert™ Page9Press the PTT button to have a Private Con-versation with the called person.10 When finished with your conversation, or if the radio you called does not answer or is not in service, press . to hang up.11 The radio will return to the home display. PLANT POLICE1If the party you want to have a Private Call does not answer the call within twenty sec-onds, you can choose to leave a Call Alert™ page. This leaves your radio’s ID number with the called radio so you can be called back later.2Press the PTT button to send the Call Alert page. You will hear five beeps, indicating that the system has received your ID number and the radio you are calling is on the air.3.4The radio will return to the home display. PLANT POLICE
46EnglishTRUNKED FEATURESCALL ALERT™ OPERATIONAnswering a Call Alert™ Page with a Group CallNote: When you received a Call Alert page, you can enter Private Call mode and call the paging radio using the latest ID received.Making a Call Alert™There are three phases in making a call alert, namely:• initiating a call alert,• entering the radio ID number that you wish to page, and • sending the call alertInitiating a Call AlertNote: The same list is shared by both Call Alert and Private Conversation features. • If your radio has been so programmed, you can press the page button for quick access to the Call Alert feature. This will take you directly to step 3.1. Upon receiving a Call Alert page, four alert tones sounds (repeats every 5 seconds).2. The green LED lights and the Call Received annunciator, F, blinks indicating a call is received.3. Press the PTT button to answer the page.4. The display shows the current talkgroup. The audible alert, LED and call received annuncia-tor turns off.5. The ID number of the radio that paged you is stored as “the last ID number received.”6. Have your conversation in the normal manner; all members of your talkgroup will hear your response. Press the PTT button to talk; release the button to listen.FIRE DEPT1. / until PAGE is dis-played.2. l (the softkey below PAGE).3. The display shows the last ID number transmit-ted or received. PAGE PHON VIEW ID: 722588
47EnglishTRUNKED FEATURESEntering the Radio ID Number that you Wish to PageIf the last ID number called or received is the desired number, go directly to step 5.To enter a new numberNote: Exactly six digits must be entered for the radio ID number. If fewer than six digits were entered, you will hear a bad-keypress tone when attempting to send the radio ID number. A bad-keypress tone will also be heard if you try to enter a seventh digit.• Once you have started entering numbers, the , key functions as a backspace key. Pressing it causes the last digit entered to be erased, and the cursor moves to the left. When the last digit is erased, an addi-tional press of this key causes the last member of the preprogrammed call list to be displayed; pressing / shows the first member of the list.To enter a number from the call listTo enter a number from a location in the call list4a. Enter the new six-digit ID number using the keypad.4b. On the display, the old ID number disappears and the new digits appear as they are being entered.4c. The cursor flashes indicating the location of the next number to be entered.4a. , or /.4b. / takes you forward to the first or next member of the list; , takes you back-wards to the last or previous member of the list.4c. When at a member of the list, the display alternates between showing the member’s name and ID number.Alternates betweenand4a. , or / to enter the call list.4b. Enter the first digit of the location number. If there are fewer than 10 members in the list, go directly to step 4e.GLORIAID: 784116
48EnglishTRUNKED FEATURESNote: The last member of the list is also the “last ID transmitted or received” at position “00” on the list.If you enter a location number that does not exist (for example, “15”), the display will show “INVALID ENTRY,” and the radio will sound an invalid-key-press tone and return back to step 4b of this proce-dure.Sending the Call AlertIf the page is unsuccessfulIf the page is successful4c. If there are 10 or more members in the list, the display shows “ID LOC#X_” (where X is the first digit). The cursor blinks to show the location of the second digit.4d. Enter the second digit of the location number.4e. The radio goes to that position in the list. The display alternates between showing the member’s name and ID number.Alternates betweenandGLORIAID: 7841165. Press the PTT button to transmit the ID num-ber.6a. If you hear one beep, the ID number has been received by the system, but the radio you are paging is not on the air; your radio remains in the Call Alert mode.If after six seconds the called radio fails to acknowledge the alert, a low-pitched alert tone sounds and the display changes to “NO ACKNOWLEDGE”.6b. Press the PTT button to send the ID number again, or press . to hang up and return to the home display.6a. If you hear five beeps, the ID number has been received by the system, and the radio you are paging is on the air and has received your page.6b. The radio automatically returns to the home dis-play PLANT POLICE
49EnglishTRUNKED FEATURESPROGRAMMING THE RADIO’S LISTSProgramming the Telephone List NumbersThis feature lets you use the radio’s keypad to change the telephone numbers assigned to any of the telephone list members. Each phone number can have up to 16 digits.To change the telephone list1. / until PROG is dis-played.2. l (the softkey below PROG).3. ; (the softkey below PHON). The display shows the first program-mable member of the telephone list.4. / or ,,—or—Use the keypad to enter the desired member’s position number (1 to 19) to view the other members of the telephone list.PROG SCAN PHON CALL FIRE DEPT5. When you stop on a member of the list, the display will alternate between showing the member’s name and telephone number.Alternates betweenand6. Press the select key to enter edit mode.7. A short press would enable the editing of the telephone number. The display shows the cur-rent member’s telephone number.8. A long press would enable the editing of the member’s name. The display shows the cur-rent member’s name.9. Use any of the alphanumeric keys to make the changes. The blinking cursor indicates the position of the next number to be added. If you require a pause in the phone dialing sequence (to allow for a delay), you can do so by first pressing the “*” key, followed by press-ing the “#” key. The display will show a “P” for pause (see page 16).POLICE DEPT55562135556213POLICE DEPT
50EnglishTRUNKED FEATURESNote: The programming-mode annunciator, K,blinks while program mode is active.• In the edit mode, the , key functions as a backspace key. Pressing it will erase the previous digit, and the cursor will move to the left. When the last digit on the display has been erased, additional presses of this key or the / key will cause you to leave the edit mode without making any changes.• You can only enter a maximum of 16 digits in any entry for the telephone list. When this maximum is reached, the cursor will disappear. If you try to add any more digits, you will hear an invalid (bad) keypress alert tone.Programming the Call ListThis feature lets you use the radio’s keypad to change the radio ID numbers assigned to the call list used by the trunked Private Conversation™ and Call Alert™ features.To change the call list radio ID numbers.10. When you have finished changing the tele-phone number, press the select key again. The change is saved in the radio’s memory.11. You are returned to step 5. The display will again alternate between showing the member’s name and telephone number. You can now change additional num-bers.Alternates betweenand12. When you have finished making changes, press . to exit program mode.13. The radio will return to the home display.POLICE DEPT5556445PLANT POLICE1. / until PROG is dis-played.2. l (the softkey below PROG).3. l (the softkey below CALL). The display shows the first program-mable member of the call list. DIR PHON PROG SCAN PHON CALL RICARDO
51EnglishTRUNKED FEATURES4. l (the softkey below CALL). The display shows the first program-mable member of the call list.5. / or ,—or—Use the keypad to enter the desired member’s position number (1 to 19) to view the other members of the call list.6. When you stop on a member of the list, the display will alternate between showing the member’s name and radio ID number.Alternates betweenand 7. Press the Select key (see page 15) to enter edit mode.8. A short press would enable the editing of the radio ID. The display shows the current mem-ber’s radio ID number.GILBERTOID: 753951ID: 7539519. A long press would enable the editing of the member’s name. The display shows the cur-rent member’s name.10. Use any of the alphanumeric keys to make the changes. The blinking cursor indicates the position of the next number to be adsee page 16see page 16).11. When you have finished changing the num-ber, press the select key again. The change is saved in the radio’s memory.12. You are returned to step 5. The display will again alternate between showing the member’s name and radio ID num-ber. You can now change additional num-bers.Alternates betweenand13. When you have finished making changes, press . to exit program mode.14. The radio will return to the home display.GIBERTOGILBERTOID: 753853PLANT POLICE
52EnglishTRUNKED FEATURESNote: The programming-mode annunciator, K, blinks while program mode is active.• In the edit mode, the , key functions as a backspace key. Pressing it will erase the previous numeric digit, and the cursor will move to the left. When the last digit on the display has been erased, additional presses of this key or the / key will cause you to leave the edit mode without making any changes (see page 18).• When the maximum number of digits for the radio ID is reached, the cursor will dis-appear. If you try to add any more digits, you will hear an invalid (bad) keypress alert tone.TRUNKED TELEPHONE OPERATIONThe trunked telephone feature allows you to receive calls using your trunked radio. When you are dialing from the keypad, your radio may be programmed with either buffered dial (you enter all digits and press the PTT button before the digits are sent out) or live dial (each digit is sent out as it is pressed).Answering a Telephone CallNote: The call received status annunciator, F, flashes when you receive a call, but is not displayed when you answer the call.1. When a telephone call is being received, you will hear telephone-type ringing.Alternates betweenand2. Press the pre-pro-grammed phone button or call response button to answer the call.3. Carry on with your conversation in the normal manner. Press the PTT button to talk; release the PTT button to listen.4. When you have finished your conversation, press . or the phone button to hang up.5. The radio will return to the home display.PLANT POLICEPHONE CALLPHONE CALLPLANT POLICE
53EnglishTRUNKED FEATURESMaking a Telephone CallThere are three phases in making a phone call, namely:• accessing the telephone system,• sending the telephone number,• having the conversation and hanging-up.Accessing the Telephone SystemSending the Telephone NumberSending the telephone number using the keypad1. / until PHON is dis-played.2. l (the softkey below PHONE).3. Your radio attempts to access the telephone system.4. If you connect successfully, you will hear a dial tone.5. The display will show the last number dialed. MSG SCAN PHON 55511356a. The number can now be entered from the keypad, using any of the numeric (0 – 9) keys, and the “*” and “#” keys. The cursor flashes to indicate the location of the next digit to be entered. A pause can be entered in the telephone number by first pressing the “*” key, then the “#” key (Buffered dial only - The pause will be shown on the display as a “P”).6b. If your radio is programmed for “live dial,” each digit is sent out as its key is pressed.—or—If your radio is programmed for “buffered dial,” each digit is temporarily stored as you enter them. After entering the number, press the PTT button to send out the number.6c. The telephone number will be sent out; you will hear tones as they are sent. If you hear a busy signal, go to step 8 for hang-up proce-dure.
54EnglishTRUNKED FEATURESSending the telephone number using a num-ber on the telephone list Sending the telephone number using a location in the telephone list6a. , or /, to enter the telephone list. / takes you forward to the next member of the list; , takes you backwards to the pre-vious member of the list.6b. Stop at the member you wish to call.6c.The display alternates between showing the member’s name and telephone number.Alternates betweenand6d. Press the PTT button.6e. The telephone number will be sent out; you will hear tones as they are sent.6f. If you hear a busy signal, go to step 8 for hang-up procedure.POLICE DEPT5556445POLICE DEPT6a. , or /, to enter the telephone list.6b. Enter the location (any preprogrammed loca-tion from 1 through 19) of the number you wish to call.6c. The radio will go to the selected location.6d.The display alternates between showing the member’s name and telephone number.Alternates betweenand6e. Press the PTT button.6f. The telephone number will be sent out; you will hear tones as they are sent.6g. If you hear a busy signal, go to step 8 for hang-up procedure.POLICE DEPT5556445POLICE DEPT
55EnglishTRUNKED FEATURESHaving the Conversation and Hanging Up• You can press the pre-programmed phone but-ton for quick access to the telephone call feature. This will take you directly to step 3.• The “PLEASE WAIT” message is a timed mes-sage. If you cannot access the telephone system (no dial tone heard), press key or the phone but-ton to hang up, and start again at step 1 of this procedure.• If you are out of range of the trunked system or the phone interconnect is out of service, “NO PHONE” is displayed and a continuous low-pitched tone sounds.• If the trunked phone interconnect is in use, a busy tone sounds and “PHONE BUSY” is dis-played.• When the maximum number of digits have been entered (buffered dial only), the cursor will disap-pear.• In the edit mode, the, key functions as a back-space key. Pressing this key erases the last digit entered, and moves the cursor to the left. When the last digit on the display is erased, additional presses of this key causes the last member of the preprogrammed telephone list to be dis-played; pressing the / key displays the first mem-ber of the list.• After reaching the number you are calling, you may need to dial an extension number before you can reach your party. Here, enter the exten-sion number from the keypad or (if so pro-grammed) use the arrow keys to find the extension number in the telephone list. If you have live dial, the number is sent as the keys are pressed. If you have buffered dial, press the PTT button again to send out the extension number.• Motorola trunked radios generate a high-pitched go-ahead tone when the systems PTT button is released. This is heard by the land-line party and is an indicator to begin talking.7. If call is answered, communicate in the normal manner. Press the PTT button to talk; release the PTT button to listen.8. When finished with your conversation, or if the number you called is busy or does not answer, press . or the phone button to send the hang-up code.9. The radio will return to the home display. PLANT POLICE
56EnglishTRUNKED FEATURESAUTOMATIC MULTIPLE SITE SELECTION (AMSS) (PRO7650 ONLY)Note: This feature is only available in the PRO7650 model. Availability of this feature is limited to customers operat-ing in a wide-area trunking system only.Forcing a Site ChangeLocking and Unlocking a Site1. Press and hold down the search button to force the change to a new site.2. You will hear a tone while the radio scans for a new site.3. The radio automatically returns to the home dis-play.SCANNINGPLANT POLICE1. / until SITE is dis-played.2. l (the softkey below SITE).3. The current lock state is momentarily displayed.or4. The display changes to5. Press the key below the desired lock state.6. The radio automatically returns to the home dis-play. SITE PAGE CALL SITE LOCKED SITE LOCKEDLOCK UNLK PLANT POLICE
57EnglishCONVENTIONAL CALLCONVENTIONAL CALLThis section outlines the conventional features of your radio. .SELECTING A CONVENTIONAL CHANNELUse the Mode Selector knob to select the appropriate conventional channel.SENDING A CONVENTIONAL CALLNote: In the United States, FCC regulations require you to monitor the conventional channels before sending a call. The moni-tor feature (see page 8) can be accessed through one of your programmable but-tons. To send a conventional callREPEATER OR TALKAROUND MODE This feature allows you to bypass the repeater and talk directly to another portable radio. This is known as the talkaround mode. The transmit frequency is the same as the receive frequency.• In REPEATER mode, you talk through the repeater, which increases the radio's operating range. The transmit frequency is not the same as the receive frequency.• If the REPEATER or TALKAROUND feature is programmed to a mode, that mode operates on either direct or repeat operation.1Hold the radio in a vertical posi-tion at a distance of about 1 to 2 inches (2.5 to 5 cm) from your mouth. 2Press the PTT button and speak clearly into the microphone. The LED indicator lights steady red while the call is being sent.3Release the PTT button to listen.
58EnglishCONVENTIONAL CALL• If the repeat/direct feature is programmed to the keypad, you can change the repeat/direct setting by doing the following.SMART PTTSmart PTT is a per-mode feature which gives the system manager better control of radio operators. When smart PTT is enabled in your radio, you cannot transmit on an active mode. Three radio-wide variations of smart PTT are available.•Transmit Inhibit on Busy Mode—you are pre-vented from transmitting if any activity is detected on the mode.•Transmit Inhibit on Busy Mode with Wrong Squelch Code—you are prevented from trans-mitting on an active mode with a squelch code other than your own. If the PL code is the same as yours, you are allowed to transmit.•Quick-Key Override—This feature can work in conjunction with either of the two above varia-tions. This feature allows you to override the transmit-inhibit state by quick-keying (two PTT button presses within a programmable period -- the default is one second -- of each other) the radio.Note: If you try to transmit (press the PTT button) on a smart PTT mode that is busy, a con-tinuous alert tone is generated until the PTT button is released; the transmission is inhibited.• The red LED blinks when the radio is receiving indicating that the mode is busy.1/ until DIR is dis-played.2l (the softkey below DIR).3The current talkaround state appears on the display for a few sec-onds. or4Then, the display prompts for the new state.5l below the desired talkaround state: repeat (RPTR) or direct (DIR).6The radio returns to the home display. DIR PWR PROG REPEATER MODEDIRECT MODE DIR RPTR PLANT POLICE
59EnglishWARRANTYWARRANTYLIMITED WARRANTYMOTOROLA COMMUNICATION PRODUCTSI. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:MOTOROLA INC. (“MOTOROLA”) war-rants the MOTOROLA manufactured Com-munication Products listed below (“Product”) against defects in material and workmanship under normal use and ser-vice for a period of time from the date of purchase as scheduled below:Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Prod-uct shall become the property of MOTOR-OLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not PRO7550/PRO7650 Portable Units Two (2) YearsProduct Accessories One (1) Year
60EnglishWARRANTYfurnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.II. GENERAL PROVISIONS:This warranty sets forth the full extent of MOTOROLA'S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLA’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. STATE LAW RIGHTS:SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state.
61EnglishWARRANTYIV. HOW TO GET WARRANTY SERVICE:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola at 1-800-927-2744 US/Canada.V. WHAT THIS WARRANTY DOES NOT COVER:A) Defects or damage resulting from use of the Product in other than its normal and customary manner.B) Defects or damage from misuse, accident, water, or neglect.C) Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.D) Breakage or damage to antennas unless caused directly by defects in material workmanship.E) A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorola's normal warranty inspection and testing of the Product to verify any warranty claim.F) Product which has had the serial number removed or made illegible.G) Rechargeable batteries if:1) any of the seals on the battery enclosure of cells are broken or show evidence of tampering.2) the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.H) Freight costs to the repair depot.I) A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’s published
62EnglishWARRANTYspecifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.J) Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product.K) Normal and customary wear and tear.VI. PATENT AND SOFTWARE PROVISIONS:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:A) that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;B) that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; andC) should the Product or parts become, or in MOTOROLA’s opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and
63EnglishWARRANTYdistribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.VII. GOVERNING LAW:This Warranty is governed by the laws of the State of Illinois, USA.
65 EnglishACCESSORIES ACCESSORIES Motorola offers a number of accessories to enhance the productivity of your two-way radio. Many of the available accessories are listed below. For a complete list, see your Motorola dealer. CARRY CASESCHARGERSHEADSETS HLN9714_ Spring 2 1/2” Belt ClipHLN9952_ Belt Clip Carry Holder (compatible with all batteries and radios)HLN9652_ Leather Case, Thin Battery with Belt LoopHLN9665_ Leather Case, Standard Battery with Belt LoopHLN9670_ Leather Case, Thin Battery with SwivelHLN9676_ Leather Case, Standard Battery with SwivelHLN9677_ Leather DTMF Case, Thin Battery with Belt LoopHLN9689_ Leather DTMF Case, Standard Battery with Belt loopHLN9690_ Leather DTMF Case, Thin Battery with SwivelHLN9694_ Leather DTMF Case, Standard Battery with SwivelHLN9701B Nylon Case, Thin Battery with Belt LoopHLN9844 Spring 1 1/5” Belt ClipAAHTN3000_ 110V Single-Unit Rapid Charger, US PlugAAHTN3001_ 230V Single-Unit Rapid Charger, Euro PlugAAHTN3002_ 230V Single-Unit Rapid Charger, UK PlugAAHTN3003_ 110V Multi-Unit Rapid Charger, US PlugAAHTN3004_ 230V Multi-Unit Rapid Charger, Euro PlugAAHTN3005_ 230V Multi-Unit Rapid Charger, UK PlugAARMN4018 Lightweight Headset with Boom Micro-phone and In-Line PTTAARMN4019 Medium Weight Over-the-Head Dual Muff Headset w/Noise Cancelling Mic & In-Line PTTAARMN4020 Heavy Duty Dual Muff Headset with Noise Cancelling Microphone & PTTRMN4051 2-Way Hard Hat Mount Headset, Black - Noise ReductionRMN4052 Tactical Headband-Style Headset, Gray - Noise ReductionRMN4053 Tactical Hard Hat Mount Headset, Gray - Noise Reduction
66 EnglishACCESSORIES REMOTE SPEAKER MICROPHONESADAPTERSBATTERIESMISCELLANEOUS RMN4054 Receive Only Hard Hat Mount Headset, Gray - Noise ReductionRMN4055 Receive Only Headband Style Headset with 3.5mm right angle plugRKN4097 In-Line PTT Adapter Cable (for use with RMN4051, RMN4052, RMN4053 Head-sets)BDN6648 Heavy Duty Muff Headset with Noise Cancelling Mic and PTT (must be used with AAHLN9716 Adapter)AAHMN9052_ Standard Remote Speaker MicrophoneAAHMN9053_ Noise-Cancelling Remote Speaker MicrophoneHLN9716_ Adapter for Audio AccessoriesHLN9717_ Adapter for the 3.5mm Audio AccessoriesHNN9008_R Small NiMH, High-CapacityHNN9009_R Large NiMH, Ultra-High-CapacityHNN9010_R Large NiMH, Ultra-High-Capacity FMHNN9011_R Large NiCd, High-Capacity FMHNN9012_R Large NiCd, High-CapacityHNN9013_R Slim Li-lon, High-CapacityHLN9820 Dust Cover for Accessory Connector
67 EnglishACCESSORIES ANTENNAS VHF 136 - 174 MHz, Ferrule Connector PMAD4012_ VHF 136–155 MHz 9 cm, StubbyPMAD4013_ VHF 155–174 MHz 9 cm, StubbyPMAD4014_ VHF 136–155 MHz 14 cm, Standard Length REd CodePMAD4015_ VHF 155–174 MHz 14 cm, Standard Length Black CodeHAD9743_ VHF 162–174MHz, StubbyPMAD4023_ VHF 150–161 MHzPMAD4025_ VHF 150–161 MHz, StubbyPMAE4002_ UHF 403–433 MHzPMAE4003_ UHF 433–470 MHzNAE6483_R UHF 403–520 MHz, WhipPMAE4006_ UHF 470–510 MHzPMAE4007_ UHF 490–527 MHzPMAE4008_ UHF 470–530 MHz, WhipNAF5037_ 800 MHz, WhipNAF5042_R 800 MHz, Stubby
68 EnglishACCESSORIES Notes
Answering a Telephone CallPress the preprogrammed phone button or call response button to answer the call.Answering a Call Alert™ Page with a Group CallPress the PTT button to answer the page.Answering a Private CallPress the call response button or the call button.Selecting a Conventional Mode1.Turn the radio on and select the desired conventional zone and mode (see Selecting a Zone and Mode).2.Press and hold the PTT switch on the side of the radio and speak slowly and clearly into the microphone area. The red LED lights continuously when the radio is transmitting.PRO7550™ and PRO7650™ Quick Reference CardRecord the functions for your radio’s programmable buttons in the table provided below. For further information, see page 22 in this User Guide.(programmable)Side Button 2 (B)(programmable)Top Button (D)Mode Selector KnobKeypadFront Buttons MicrophoneLED IndicatorOn/Off/Volume Knob(programmable)Side Button 3 (C)Push-to-Talk (PTT)ButtonSide Button (A)(prograrmmable)(Select Key)Button Function Short Press Long Press Hold Down Page

Navigation menu