Motorola Solutions 89FT5820 r750plus User Manual Preliminary

Motorola Solutions, Inc. r750plus Preliminary

Contents

Preliminary User Manual

MotorolaiDEN®Digital Multi-Service Phoner750plus User’s Guide September 02 69P2966C35-O
Table of Contents iii Table of Contents Table of Contents................................................................................ iiiWelcome ............................................................................................... 1 TTY Access.................................................................................................... 2Large-Print Manuals....................................................................................... 2Features of your r 750 plus Phone.................................................................... 2Attaching and Charging the Battery............................................................... 4Attaching the Battery............................................................................... 4Detaching the Battery.............................................................................. 4Charging the Battery ............................................................................... 4Battery and Charging Status.................................................................... 4Turning On Your r 750 plus Phone.................................................................. 5Turning Off your r 750 plus Phone ..................................................................5Connecting the Supplied Antenna........................................................... 6Keypad Lock .................................................................................................. 6Activating Keypad Lock ......................................................................... 6Receiving Incoming Calls ....................................................................... 6Receiving New Mail Messages............................................................... 7Receiving Voice Mail ..............................................................................7Receiving Private (Two-Way Radio) Calls............................................. 7Deactivating Keypad Lock...................................................................... 7Display Icons.................................................................................................. 8About Modes and Menus................................................................................ 9Setting the Time and Date.............................................................................. 9Changing the Display Language .................................................................. 11Selectable Backlight Timer .......................................................................... 11 Making Phone Calls .......................................................................... 12 Using Other Dialing Methods ...................................................................... 12Scroll ..................................................................................................... 12Speed Dial ............................................................................................. 12Automatic Redial................................................................................... 13Last Number Redial............................................................................... 13Turbo Dial® Key................................................................................... 13Plus Dialing........................................................................................... 14Hands-Free Speakerphone..................................................................... 14Receiving a Phone Call ............................................................................... 14Ending a Phone Call .....................................................................................14What Is My Phone Number?........................................................................ 15
iv www.motorola.com/LMPS/iDEN/products/r750+/r750+.HTML VibraCall® Alert ......................................................................................... 15Selecting VibraCall Alert for All Incoming Calls and Messages......... 15Selecting VibraCall Alert for Individual Services................................ 16Setting the Ringer Volume........................................................................... 16Setting a Ring Style for the Alternate Line ..................................... 16 Additional Phone Services ................................................................ 17 Call Waiting................................................................................................. 17Turning Off Call Waiting ..................................................................... 17Call Hold............................................................................................... 173-Way Calling....................................................................................... 18Alternate Phone Line ................................................................................... 18Setting the Active Line ......................................................................... 18Receiving a Call.................................................................................... 19Receiving a Call on Your Alternate Line ............................................. 19Receiving a Phone Call Using Speakerphone....................................... 19Missed Call Indicator................................................................................... 19Call Forwarding ...........................................................................................20Unconditional Call Forwarding ............................................................ 20Conditional Call Forwarding ................................................................ 20 Creating, Editing, and Using Stored Lists....................................... 22 Combined Phone Number and Private ID List..................................... 22Entering Numbers............................................................................ 22Entering Names ............................................................................... 22Storing Names and Numbers........................................................... 23Pause Digit Entry............................................................................. 24Editing and Erasing Phone List Entries........................................... 24Editing and Erasing Private ID List Entries .................................... 25Last 10 Calls Received and Sent Lists.................................................. 26Quickstore of Phone Numbers.............................................................. 26 Making Private Calls......................................................................... 28 Scroll ................................................................................................28Name Search.................................................................................... 28Receiving a Private Call ...............................................................................28Private/Group Mode Speaker .......................................................................28Call Alert...................................................................................................... 29Selecting a Call Alert Tone Style .................................................................29Setting an Alert Tone Style.............................................................. 29Sending a Call Alert..................................................................................... 29Receiving a Call Alert........................................................................... 29Call Alert Queuing................................................................................ 30
Table of Contents v Clearing or Queueing a Call Alert......................................................... 30Responding to a Queued Call Alert....................................................... 30Quickstore of Private IDs .............................................................................31Storing Your Private ID................................................................................ 31 Making Group Calls.......................................................................... 32 Receiving a Group Call ................................................................................ 32Adding and Storing a Talkgroup.................................................................. 32Area Selection ..............................................................................................33Private/Group Mode Speake .........................................................................33 Advanced Features............................................................................ 34 Multi-Simultaneous Talk Group Scan.......................................................... 34Entering Group Mode............................................................................ 34Initiating a Group Call........................................................................... 35Responding to a Secondary Talkgroup ................................................. 35Turning Scan On and Off ......................................................................36Aliasing Talkgroup Mode ..................................................................... 36Talkgroup Mode Selection by Direct Entry .......................................... 37Talkgroup Mode Selection by Memory Scroll...................................... 37Emergency Group Call................................................................................. 37Placing an Emergency Group Call........................................................ 37Canceling an Emergency Group Call.....................................................38Receiving an Emergency Group Call.................................................... 38Receiver Operations During an Emergency Call ..................................38Status Message ............................................................................................. 38Entering the Status Message Function .................................................. 39Selecting a Status Message with Direct Entry....................................... 39Selecting a Status Message Using Memory Scroll................................ 40Selecting a Target by Direct Entry........................................................ 40Selecting a Target by Memory Scroll.................................................... 40Selecting a Target by Alpha Search ...................................................... 40Sending a Status Message ..................................................................... 41Exiting the Status Message Function .................................................... 41Receiving a Status Message .................................................................. 41ID List Programming .............................................................................41Isolated Site Operation ................................................................................. 42Entering ISO 42Initiating a Group Call ...........................................................................43Exiting ISO............................................................................................ 43Other Operations ................................................................................... 43 Using Mail Services ........................................................................... 44
vi www.motorola.com/LMPS/iDEN/products/r750+/r750+.HTML Net Mail ....................................................................................................... 44Voice Mail .............................................................................................45Alert Receipt During Phone Call.......................................................... 45Message Mail............................................................................................... 46Saving and Erasing Mail........................................................................ 46Auto Call Back.......................................................................................47Mail Memory Full..................................................................................47 Using Your Phone as a Modem........................................................ 48 TTY Users ........................................................................................48 Setting Programming Menus............................................................ 49 About Error Codes........................................................................................ 54 Optional Accessories ........................................................................ 56 Batterie......................................................................................................... 56Charging the Battery............................................................................. 56Battery Operating Instructions.............................................................. 56Rapid Travel Charger................................................................................... 57Using the Rapid Travel Charger (110V/220V/240V)........................... 57Rapid Travel Charger Operating Specifications................................... 57Vehicular Battery Charger ...........................................................................58Using the Vehicular Battery Charger ....................................................58Removing the Vehicular Battery Charger ............................................ 58Operating Specifications....................................................................... 58Desktop Dual-Pocket Charger .....................................................................59Charging a battery................................................................................. 59Data Operation...................................................................................... 59Inserting and removing a battery from the rear pocket......................... 60Desktop Charger Status .........................................................................60Desktop Charger Troubleshooting ........................................................ 60Audio Adapter....................................................................................... 62Using the Audio Adapter 62Attaching/Detaching the Earpiece Microphone or Headset ................. 62Removing the Audio Adapter.......................................................... 63Battery Belt Clip................................................................................... 63Using the Battery Belt Clip ..............................................................63Leather Carry Case ............................................................................... 63Hard-Install Car Kit .............................................................................. 64Remote Speaker/Microphone ............................................................... 65Attaching and Removing the Swivel Clip ....................................... 65Connecting the Remote Speaker/Microphone to the Portable......... 65Operation ......................................................................................... 66
Table of Contents vii Product Safety and RF Exposure for Portable Radios.................. 67 Compliance with RF Energy Exposure Standards ....................................... 67Federal Communication Commission Regulations...................................... 67Electro Magnetic Interference/Compatibility............................................... 69Facilities ................................................................................................ 69Aircraft .................................................................................................. 69Medical Devices........................................................................................... 69Pacemakers............................................................................................ 69Hearing Aids.......................................................................................... 70Other Medical Devices ..........................................................................70Driver Safety ................................................................................................ 70Operational Warnings................................................................................... 71For Vehicles with an Air Bag.................................................................71Potentially Explosive Atmospheres .......................................................71Blasting Caps and Blasting Areas ......................................................... 71Operational Cautions.................................................................................... 72Antennas................................................................................................ 72Batteries................................................................................................. 72 Intrinsically Safe RadioInformation ........................................................................................73 FMRC Approved Equipment .......................................................................73Repair of FMRC Approved Products ...........................................................75Repair .....................................................................................................76Relabeling ..............................................................................................76Do Not Substitute Options or Accessories............................................ 76 Accessory Safety Information ..........................................................77Warranty............................................................................................ 79Patent & Trademark Information ...................................................87Owner’s Information......................................................................... 91Important! Be sure to read Product Safety and RF Exposure for Portable Radios on page 67 before using your phone.
viii www.motorola.com/LMPS/iDEN/products/r750+/r750+.HTML DECLARATION OF CONFORMITY Per FCC CFR 47 part 2 Section 2.1077(a) Hereby declares that the product: Conforms to the following regulation: FCC Part 15, subpart B Class B Digital device Date: September 15, 2002 Responsible party name: Motorola Inc. Address: 8000 West Sunrise Boulevard, Plantation, FL 333328 USA Phone number: 1 (800) 453-0920 Product name: r750plusModel Number: H44WCH6RJ6AN, H44WAH6RJ6AN Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
1 Welcome ongratulations on purchasing your Motorola iDEN r 750 plus data-capable, multi-service, digital portable phone. Superior features and state-of-the-art technology help to keep you in constant touch with all your business and personal contacts. Your r 750 plus phone has so many new and exciting features! With wireless access to the Internet, you can check on the latest news and weather, get stock quotes, send and receive e-mail, and download information from your computer. A missed-call indicator lets you know that you received calls while you were away.And new ease-of-dialing features, such as Turbo Dial  key and the Last 10 Calls Received and Sent lists, help you to quickly make and return phone calls. NOTE: Some features may be network dependent or subscription only, and may not be available in all areas. Contact your service provider for more information. The r 750 plus phone offers: •Phone Mode—for cellular phone operation. See Page 12. •Private Mode—for two-way radio use to talk with one person. See Page 28. •Group Mode—for two-way radio use to talk with several people. See Page 32. •Net Mode—for accessing the built-in microbrowser. See the Net Mode User’s Guide. •Advanced Features—for monitoring multiple talkgroups, emergency calls, status messages, and Isolated Site Operation (ISO) functions. Dependent on Network and phone availability . See Page 34 .•Mail Services—for message, voice, and net mail. See Page 44. •Fax and Data Transfer—for circuit data faxes and file transfers. See Page 48. NOTE: This manual describes the features of your phone as they were set up at the factory. However, your carrier or your organization may have changed or added features. For more information, check with your car-rier or your organization. This manual provides information about how Net Mode works with various features of your r 750 plus phone. For information on using the microbrowser and other components of Net Mode, see the Net Mode User’s Guide .C
2 TTY Access TTY access is available on your phone. See the Wireless Data Services User’s Guide for complete instructions. Large-Print Manuals A large-print version of the phone’s User’s Guide is available. For more information on Motorola products for people with disabilities, contact Motorola Customer Care at SSC#(800) 323-9949. Features of your r 750 plus Phone * These features are available in the Net Mode browser.** Emergency Call Key is orange; VibraCall ® Alert key is black (800 MHz only) NOTES: Remove the plastic film lens protector from the display before you use your phone for the first time.Some keys have multiple uses. For more information, see the Net Mode User’s Guide.Press any key or button to turn on the keypad backlight.1235478960AntennaEarpieceRubberOver-MoldGripAlphanumericDisplayOption KeyScroll KeysSend/End KeyMode Key* Home Key* Next KeySpeaker Key** Emergency Call Button (AFU only)orVibraCall® Alert On/Off Button (800 MHz only)Status LightVolume Control/ List ButtonsPush-To-Talk (PTT) ButtonMENU Option KeyOn/Off Key* Punctuation KeyAlphanumeric Keypad* Back Key MicrophoneAccessory Connector (
Welcome 3 Antenna Install for optimal signal. Earpiece Hold to your ear to hear the other party. Volume Control/ List Buttons Press to adjust volume levels in Phone, Private, and Group modes. Push-To-Talk (PTT) Button Transmit a Private or Group Call, or a Call Alert. Press and hold the PTT button to talk; release it to listen. Mode Key Press to change modes. Emergency Call Button or VibraCall ® Button (800 MHz only) Emergency Call Button: Activates Emergency Group Call feature (see “Emergency Group Call” on page 37 ).VibraCall Button: Turns on/off the VibraCall Alert feature (see “VibraCall® Alert” on page 15 ). On/Off Key Press and hold to turn your r 750 plus phone on or off. Status Light Shows the phone’s status. See Table 2 on page 5 for more information. Punctuation Key Add punctuation in the Net Mode browser (within T9™ Text Input). Back Key Return to the previous browser screen. Microphone Use to speak during calls. Rubber Over-Mold Grip Hold the phone more securely and comfortably with the rubberized grip. Alphanumeric Display View up to four lines (12 characters per line) or six lines (16 characters per line) on the display. MENU Key Press to scroll through menu options. Scroll Keys Press the left key to scroll backward or the right key to scroll forward through menu options and lists. Option Keys Press the right or left option key to select the menu option that appears in the display directly above the key. SEND/END Key Press to answer an incoming Phone call. After entering a phone number, press to begin an outgoing Phone call or to redial the entered phone number. Press to end Phone calls. Alphanumeric Keypad Enter telephone numbers, Private Call IDs, and alphanumeric characters. Next Word Key Press to display the next word choice in the browser (within T9 Text Input). Home Key Press to return to the browser Home menu. Speaker Key Press to hear incoming calls through the earpiece or the speaker during private and group conversations. Accessory Connector Connect battery charging, audio, and data accessories.
4 Attaching and Charging the Battery Attaching the Battery 1. Insert the battery bottom-end first into the battery guide holes on the housing of the phone.2. Push the battery forward into the hous-ing of the phone until it securely locks. Detaching the Battery 1. Press down on the battery release button.2. Pull on the battery and remove it. Charging the Battery You should charge your r 750 plus phone battery overnight before initial use. This allows your battery to achieve its maximum capacity and life.Connect the charger to the bottom of the r 750 plus phone. NOTE: For more information on charging the battery, see “Batteries” on page 56 . Battery and Charging Status A low battery is indicated by a short, chirp-like sound through the speaker. The battery strength indicator icon shows the remaining charge in your battery. Three bars indicates full charge. As the charge is reduced through use, the bars progressively reduce from three to two bars, then one bar, then disappear. The indicator flashes when you have less than five minutes of talk time (see Table 1 ).
Welcome 5 Table 1: Battery Charging Status Turning On Your r 750 plus Phone Press and hold the On/Off button until a set of icons appears on your display. Next, a welcome message displays while the r 750 plus phone connects to your carrier’s network. The Status Light (LED) indicator on the r 750 plus phone shows the service state. See Table 2 . Table 2: LED Indicator Turning Off your r 750 plus Phone a. Press and hold the On/Off button until you see the message “Pow-ering Off”. IconFlashesCharging Low Battery 0-30% 31-60% 61-90% 91-100%Discharging Low Battery 0-10% 11-40% 41-70% 71-100% Status Light Indicator r 750 plus phone status Flashing Red Registering—your r 750 plus phone is signing on to your carrier’s network. Please wait.Solid Red No service—your r 750 plus phone cannot sign on because it is outside your carrier’s service area.Flashing Green In service—your r 750 plus phone is ready to use. You can now place and receive calls.Solid Green In use—your r 750 plus phone is currently being used. To make sure that you ended the last call, press .
6 Connecting the Supplied Antenna Turn your r 750 plus phone off before installing or removing the antenna.Insert the bottom of the antenna into the screw-in base on the top of the r 750 plus phone. Turn clockwise by hand until snug. Do not force. NOTE: Connect only the supplied antenna NUF5075 (for 800 MHz) or NUF5038 for (900 MHz) to the antenna connector on your r750plus as it is the only one that has been tested for compliance with Federal Communications Commission requirements and authorized by them for use on this radio product. Please see “Product Safety and RF Exposure for Portable Two-Way Radios “on page 67 of this manual for more information. Keypad Lock The r 750 plus phone includes a Keypad Lock feature that enables you to quickly lock the phone’s keypad to avoid inadvertently pressing keys or placing calls. Once Keypad Lock is activated, you can only perform the following tasks (unless you receive an incoming call, page, etc.): •Turn your phone On/Off•Unlock the keypad Activating Keypad Lock Before locking your phone’s keypad, you may want to read this entire section to learn how to respond to incoming calls, pages, etc.From the Phone Ready screen, simultaneously press and . The message Keypad Locked displays on your phone. NOTE: Whenever a key is pressed, while in Keypad Lock mode, the “Keypad Locked” message displays as a reminder. Receiving Incoming Calls When you receive an incoming phone call, keypad lock will be temporarily disabled. You may perform the following: Press to answer the call. Or,• Press under “End” to send the call to voice mail and reactivate keypad lock.1LockedKeypad
Welcome 7 Receiving New Mail Messages When you receive a new mail message (see “Using Mail Services” on page 44 for more information), the keypad lock will be temporarily disabled. You may perform the following:• Press under “Later” to return to Phone Ready and reactivate the lock. Or,•Press under “Now”. Press under “Read”. Press under “Save” or “Erase”. Once you have finished, press under “Exit” to return to Phone Ready and reactive the lock.NOTE: If you have disabled the Message Mail Notification feature, only the icon will display. You will not receive the read Now/Later options.Receiving Voice MailWhen you receive a new voice mail (see “Voice Mail” on page 45) keypad lock will be temporarily disabled. You may perform the following:•When New Voice Mail Waiting displays, press under “Exit” to return to Phone Ready and reactivate the lock. Or,•Press under “Dial” to access Voice Mail service. Once you have finished, press to exit Voice Mail, return to Phone Ready and reactivate the lock.NOTE: If you have disabled the Message Mail Notification, icon will dis-play, however, “New Voice Mail Waiting” will not appear.Receiving Private (Two-Way Radio) CallsWhen you receive an incoming private (two-way radio) call (see “Receiving a Private Call” on page 28) the phone will automatically activate the applicable mode. Once the call is terminated and the Display Timer has expired, the phone will return to Phone Ready and reactivate the lock.Deactivating Keypad LockFrom the Phone Ready screen, simultaneously press and . The message Keypad Unlocked displays on your phone.UnlockedKeypad
8Display IconsDisplay icons appear on the screen to inform you of existing conditions. See the following list.The following icons may appear along the top of the display.Signal Strength IndicatorShows the signal strength. Six bars indicate the strongest signal. Calls and messages may not be sent or received in no-signal areas.Battery Strength IndicatorShows the remaining charge in your battery. Three bars show full charge. The indicator flashes when you have less than five minutes of talk time remaining.Voice MailIndicates that unplayed messages are waiting in your voice mail box.New Message MailIndicates that you have new text messages in your mail box.Unread Message MailIndicates that you have unread Message Mail.Vibrate AllIndicates that the Vibrate All option is turned on. You will not hear a ring tone. Call ForwardIndicates that incoming phone calls are being forwarded.Active Line Indication Displays the active phone line (1 or 2). Private/Group SpeakerIndicates that the Private/Group speaker is off. You will hear calls through the earpiece. Packet DataIndicates packet data registration. The blinking arrows indicate send and receive activity. For more information, see the Wireless Data User’s Guide.Some of the following icons may appear in the browser.Secure Packet Data ConnectionIndicates that your packet data information is encrypted during transmission.More InformationIndicates that there is more text to read above, below, or above and below the current screen.
Welcome9About Modes and Menus Modes and menus are the navigational tools, providing access to the various features of your r750plus phone. Pressing the Mode key takes you through the mode choices. Pressing the Menu key takes you through the menu options within each mode.There are four modes: •Phone—for cellular phone calls. See Page 12. •Private—for one-to-one radio calls. See Page 28.•Group—for radio calls with all individuals in a designated talkgroup. See Page 32.•Net—for browser use. See the Net Mode User’s Guide.To change modes:Press until you see the desired mode.To select menu options:Press until you see the desired menu option, then press under the desired menu option to select it.Setting the Time and Date If your carrier provides this option, you can set your phone to display the current time and date. Unless the phone is turned off, it continues to display the current time during a loss of service. You have a choice of a 12- or a 24-hour clock format. See Table 3.NOTE: When this feature is activated, your phone automatically displays local time. Table 3: Time Display Options12-Hour Display 24-Hour Display 12:00a 00:00 6:25a 06:25 12:00p 12:00 6:25p 18:25
10You have a choice of either a MM/DD (month/day) or a DD/MM (day/month) date format. See Table 4:. If your carrier activates the time and date, they are displayed on the third line in all modes (Phone, Private, Group, Net). The time of day is also shown during an active Phone call. The time and date are not displayed in Group mode when you select an Area option.To set the time and date format:1. Press , , , . 2. Select “Ok”. The Time/Date screen displays. The default (preset) time and date format that displays depends on your carrier. You can accept the default format or select an alternate format.3. Press r until you see the Time Format screen.4. Do one of the following:• To use the 12-hour format, go to the next step. • To use the 24-hour format, select “24hr”. (See Table 3 on page 9.) 5. Press until you see the Date Format screen.6. Do one of the following:7. To use the MM/DD format, select “Exit”.8. Or to use the DD/MM format, select “DD/MM”, then “Exit”. (See Table 4 on page 10.)Table 4: Date Display OptionsDate Month/Day Format(MM/DD) Day/Month Format (DD/MM)January 2nd 01/02 02/01January 31st 01/31 31/01October 9th 10/09 09/10December 31st 12/31 31/12171=Time/Date Ok Exit 71171=Time/Display:On ▼ Off Exit 1Time Format12 Hour24hr Exit 1Date Format:MM/DDExit MM/DD
Welcome119. Select “Exit” again to leave the Time/Date Programming option. The Ready screen for each mode (Phone, Group, Private, and Net) now displays the selected time and date formats.Changing the Display LanguageYou can customize your r750plus phone to display one of four languages: English, French, Spanish, or Portuguese. To change the displayed language:1. Press , , , . 2. Select “Ok”. Press or to scroll through the language options. Selecting “Exit” at any time retains the current language selection. 3. When the desired language appears on your display, select “Ok”. The displayed text immediately changes to the selected language. 4. Select “Exit”. The language that you select will be the displayed language. Selectable Backlight TimerYour phone’s backlight is what illuminates the display when you receive or make calls. Through your Programming Menu (*,#,16), you can customize the amount of time that your backlight remains illuminated: 0, 10, 20, or 30 seconds. By choosing zero (0) seconds, all keypad backlighting, and the Status Light, remains off (is disabled). This means, when choosing 0 seconds, the r750plus phone enters completely dark mode. See “Setting Programming Menus” on page 49 for more information.70170=LanguageEnglish Ok Exit 1Language Français Ok Cancl
12Making Phone CallsIn addition to making and receiving phone calls in Phone mode, you can forward calls, use call waiting, put calls on hold, and create and use stored lists. Phone Ready is the main screen.NOTE: See “Additional Phone Services” on page 17 for more information.You can place a call by entering the phone number on the keypad.1. From the “Phone Ready” screen, using the keypad, enter the desired number.If you make a mistake, press once to move back one digit, or select “Cancl” to start over.2. Press to place the call.3. To end the call, press .Using Other Dialing MethodsTo use other dialing methods such as Scroll, Speed Dial, or Name Search, names and numbers must be programmed into your phone. See “Creating, Editing, and Using Stored Lists” on Page 22.Scroll 1. From the Phone Ready screen, or to scroll backward or forward through the stored list of numbers and names.2. Press to place the call.3. To end the call, press .Speed Dial 1. From the Phone Ready screen, press until you see the “Spd#” option on the last line of your display.2. Select “Spd#”.3. Enter the assigned speed-dial number (1-100). You will see the stored name and phone number associated with the speed dial number. 4. Press to place the call.5. To end the call, press .1Phone ReadyLine110:42a 11/06 Ok Exit
Making Phone Calls13Name Search1. From the Phone Ready screen, select “Name”.2. Using the keypad, enter the first letter of the desired name, for example, to search for the name Bob:3. Enter “B” by pressing twice.4. Press to scroll through all the names starting with “B” until you see “Bob”.5. Press to place the call.6. To end the call, press .Automatic RedialIf you receive a “System Busy, Try Later” message, press to have your phone automatically redial the number. You will hear a ring-back tone when the call is successful.Last Number RedialTo redial the last number that you called, press .Turbo Dial® KeyTurbo Dial key enables you to quickly place a phone call by simply pressing and holding the numeric key on the keypad that corresponds to the stored entry in your Phone list directory. There are nine Turbo Dial positions, 1 through 9. NOTE: If you are on a Phone call, place the call on hold before using Turbo Dial key. From the Phone Ready screen: 1. Select one of the first nine entries in the Phone list using key numbers 1 through 9. For example, press 1 for Turbo dial . Keypad number 0 is not avail-able for Turbo Dialing.2. Press and hold the desired key for two seconds to acti-vate the Turbo Dial key. The phone begins to dial the number and “Phone Ready” changes to “Phone-In Use”.2a djb1Phone Ready1Cancl11Phone-In UseOffice12:45p 10/18
14Plus DialingThis feature enables you to place an International call from any country -- without entering the local international access code.1. Press and hold for two seconds. A “0” appears, then changes to a “+” that precedes the appropriate international access code needed to place the call.2. Enter the international telephone number.3. Press .Hands-Free SpeakerphoneThe r750plus phone provides the convenience of a speakerphone for holding impromptu meetings or listening to your voice mail messages. During speakerphone operation, you may either speak or listen, but you cannot do both at the same time.To use the speakerphone:1. Select “Spkr.” The “Spkr” option flashes while the speakerphone is on.2. Place the phone 15-30 inches (38-76 cm) away from you. In a noisy envi-ronment, you may want to move the r750plus phone closer to you for better transmission.NOTE: If there is background noise in your area, you may have difficulty hearing a caller’s voice or messages. To resolve this problem:(1) Press until you see the “Mute” menu option.(2) To listen, press under “Mute”. The display changes from “Phone-In Use” to “Phone-Mute”, indicating that the microphone is muted.(3) To speak, press under “Mute” again. The display changes from “Phone-Mute” to “Phone-In Use”, indicating that the microphone is on.While the microphone is muted, you can hear incoming audio, but a caller cannot hear any speech coming from your r750plus phone.Receiving a Phone Call Press one of the following keys: , or ,or , Or press any numeric key (0 through 9). To activate the speakerphone option, select “Spkr.”Ending a Phone CallPress .01IncomingPhone Call Spkr End
Making Phone Calls15What Is My Phone Number?Press , , ,to display your own phone number. VibraCall® AlertVibraCall Alert is a vibration alert system that notifies you of incoming Messages, Phone, Private, Group, and Data calls. You can set a vibration alert for all services or for individual services. When you set vibration alerts, they are set only for the current line. If you have a second phone line, you must select that line and repeat the procedure for selecting all services or selecting individual services to vibrate.The alert choices are: • Vibe All—produces a vibration alert for all incoming calls and messages.• Phone Vibrate—produces a vibration alert for incoming phone and circuit-data calls.• Phone Vibrate/Ring—produces a vibration alert followed by a ring tone for phone and circuit-data calls.• Mail Vibe—produces a vibration alert for mail messages and net alerts.• Group/Prvt Vibe—produces a vibration alert for incoming group and private calls.NOTE: If VibraCall Alert is set for incoming calls and messages, the power-up sequence includes a brief vibrate cycle.Selecting VibraCall Alert for All Incoming Calls and MessagesAdvanced Feature Units (orange button on top of housing): To set a vibration alert for all incoming calls and messages:1. Press , , .2. Select “All”. You will receive a brief vibration alert.After you set the alert, the display returns to the previous mode and (the Vibrate All icon) appears at the top of your display.All Other (Non-Advanced Feature 800 MHz units) Units (black button on top of housing): Perform the same steps as described above, or press the black button on top of the r750plus phone.11=Own Ph#9545553434Edit Exit 119=VibrateAlert:Off All Exit 91Phone ReadyLine1 Vibe10:54a 12/09Mail Name
16Selecting VibraCall Alert for Individual ServicesTo set a vibration alert for specific phone or mail services:1. Press , , .2. Press until you see the “Selct” menu option.3. Select “Selct”. The first choice is Phone Vibrate. 4. To view the Vibe/Ring vibration alert choices, press on the keypad.5. To view other choices, press .• To receive vibration alerts only for Mail, select “Mail Vibe”, then select “On”.• To receive vibration alerts for Group and Private calls, select “Group/Prvt”, then select “On”.6. Select “Exit” to return to the Vibrate Alert menu.7. Select “Exit” again to return to the previous mode. Setting the Ringer VolumeYou can adjust the ringer volume for incoming calls. If you have a second phone line, you must set each line separately. Be sure to select the desired line before setting the volume. 1. Press , , , . The “30=Ringer Vol-ume” screen displays.The display shows your current ringer volume.2. Press the Volume Control buttons on the side of the phone to listen as you raise or lower the volume. At the lowest setting, the screen displays “Ringer Vol-ume Silent”.3. When you reach the desired level, select “Exit”. Setting a Ring Style for the Alternate Line1. From the Phone Ready screen, press until you see “Line2”.2. Select “Line2”.3. Repeat the procedure for "Setting an Alert Tone Style", above.19=VibrateAlert:OffAll Exit919=VibrateAlert:Off Select 1PhoneVibrate: Vibe Exit1Group/PrvtVibe:OffOn Exit130=RingerVolume Exit30
Additional Phone Services17Additional Phone ServicesNOTE: Some features may be network dependent or subscription only, and may not be available in all areas. Contact your service provider for more information.Call WaitingUsing the Call Waiting feature, you can answer an incoming call when you are on another call. Call Waiting is on unless you turn it off for a particular call.1. After the alert tone, your display shows the incoming number and asks “Accept Call?”. To accept the call, select “Yes”. To decline the call, select “No”. 2. Press Press , then select “Hold” to place the sec-ond call on hold and return to the first call. Selecting “Hold” switches you between the two calls.3. To end the active call, press . Turning Off Call Waiting You can turn off Call Waiting if you do not want to be interrupted during a call.1. Press until you see “Wait”, then select “Wait”.2. Select “Off”. Call Waiting will be disabled for one call—but will automat-ically reset to “On” after that call.Call HoldWhen you are on a call, you can place the call on hold and make a second call. 1. To place the active call on hold, press , then select “Hold”. You may then answer or place another call.2. To remove the call from hold, press , then select “Hold” again.15551212Take CallOn Line 1 Yes No 1Call 1-Hold555121210:54a 12/09 Hold Name
183-Way CallingIf your carrier provides 3-way calling, you can combine two ongoing phone calls into one conversation. This option is available only when you initiate the second call.After you place or receive a phone call:1. Select “3way”. This action places the current call on hold.2. Enter the phone number for the second call and press .3. When the second call is connected, select “3way” to join the calls. Both phone numbers and “3way” appear on your screen.4. To end the 3-way call, press .Alternate Phone LineIf your phone is activated with two phone lines, you can switch between them. To change phone lines, your phone must be at the Phone Ready screen. The following settings are independent for each phone line. When you enable a setting, it applies only to the active line.• Ringer Volume• Auto Answer• One-minute Beep• Automatic Display Timer• Resettable Timer• Total Call Timer• Selectable Ring Styles• Call ForwardingSetting the Active LineAt the “Phone Ready” screen:1. Press until you see “Line2”. (If you are on Line 2, you will see “Line1”.)2. Do one of the following:• Select “Line2” to activate Line 2 when Line 1 is the active line.• Or, select “Line1” to activate Line 1 when Line 2 is the active line. Outgoing calls will be made on the selected line. 1Phone-In Use555121210:42a 11/061Phone ReadyLine111:48a 08/21Line2
Additional Phone Services19Receiving a Call You can receive calls on either line, regardless of the active line setting.• If you receive a call on the currently active line, that icon simply flashes.• If you receive a call on the line that is not currently active, the active line icon remains lit and the alternate line icon flashes.Receiving a Call on Your Alternate Line 1. Select “Yes” to answer the call on the other line. Your previous call will be placed on hold.2. Do one of the following:• To end the call, press . • Or, to place the current call on hold, or to toggle between calls, press , then select “Hold”.When the call ends, the phone remains active in the last active line selected.Receiving a Phone Call Using SpeakerphoneSelect “Spkr” to activate the speakerphone.Missed Call Indicator Your r750plus phone notifies you of received, but unanswered, phone calls. If you subscribe to Caller ID, the caller’s phone number is stored in your Last 10 Calls Received list. Your screen displays a flashing message, for example, “2 Rcvd Calls”, with the number of missed calls. Press any key to clear the flashing indicator.To retrieve the missed calls: 1. From the Phone Ready screen, press . The menu options change to “Calls” and “Spd#”.2. Select “Calls”. The Rcvd Calls screen opens with the number, time, and date of the last call that you received.3. Scroll to continue viewing the list.13055551212Accept CallOn Line 2? Yes No 1Phone ReadyLine12 Rcvd Calls Mail Name1Phone ReadyLine110:42a 11/06 Calls Spd#1Rcvd Calls1=555222210:42a 11/06 Store Cancl
20Call ForwardingCall forwarding lets callers reach you wherever you are. You have two options: forward all incoming calls (unconditional) or select those circumstances (conditional) when you want your calls forwarded. Unconditional Call ForwardingUnconditional call forwarding sends all incoming calls to the designated number.NOTE: When you set unconditional call forwarding, your phone does not ring.1. From the Phone Ready screen, press until you see “Forwd” on the last line of the display.2. Select “Forwd”.3. To select the number where you want your calls for-warded, do one of the following: • Enter a number.• Or, press the scroll keys to select a number from your stored list. 4. Select “On”.5. After the “Please Wait” message displays, select “Exit”.6. Notice that the Call Forward icon z appears on your display when Uncon-ditional Call Forwarding is set. Conditional Call ForwardingYou may want to forward your calls when your r750plus phone is:• Busy on another call or accessing the browser (Busy)• Not answered (NoAns)• Outside the service area (NoRch).NOTE: You must turn off Unconditional Call Forwarding before you can set Conditional Call Forwarding options. 1. From the Phone Ready screen, press until you see “Forwd” on the last line of your display, then select it. 1Phone ReadyLine19:06a 9/03 Forwd Spd#1Forwd:OffTo:5551212 On Exit 1Phone ReadyLine19:06a 9/03 Spd#Forwd
Additional Phone Services212. Press once again until you see “Busy” and “NoAns” on the last line of your display. 3. To forward your calls when your phone is in use, select “Busy”.4. To forward your calls when you do not want to answer them, select “NoAns”.5. Press again until you see “NoRch” and “Rcl#”.• To forward your calls when you cannot be reached, select “NoRch”.• To see the call forward number, select “Rcl#”.6. After you select the call forward option, either enter the number where you want your calls to be forwarded, or press the scroll buttons and select a number. 7. Select “On”.8. Select “Exit”.9. You can set more than one condition by repeating steps 2 through 6.1Forward:OffBusy NoAns Busy To:1Forward:Off RC1# NoRch To: Yes No
22Creating, Editing, and UsingStored ListsA stored list is a directory of phone numbers and Private IDs and their related names. Stored lists are convenient because you do not have to remember names and numbers—you simply scroll through your stored list. Combined Phone Number and Private ID List You can set a combined Phone and a Private ID with the associated name, which eliminates the need to program the Private ID separately. You can add up to 100 numbers to your Phone list, store them with names, and assign them to speed-dial numbers. Entering Numbers To enter a number, press the corresponding key on the keypad.Entering NamesTo enter a letter, press the key the required number of times, which is related to the letter’s position on the key. Table 5 describes how to enter each letter on the key.Table 5: Entering Letters and Numbers on the Keypad To shift to lowercase letters, press and hold after a letter is entered. To enter: Press P once.Q twice.R three times.S four times.7 five times.77
Creating, Editing, and Using Stored Lists23Storing Names and Numbers1. Press , , , . 2. Select “Ok”.The next screen briefly displays the remaining number of phone numbers and private IDs that you can store.3. Enter the name that you wish to store.Select “Store”.See Figure 1 . for an example of entering a name.Figure 1. Entering a Name2. Enter the phone number that you want to associate with this name and select “Store”. To skip the Phone Number entry, select “Skip”. You will go directly to the “Enter Prvt ID Number” screen.The next screen displays the name that you entered and a flashing speed-dial number where the entry will be stored.3. Do one of the following:• To accept the speed-dial number shown, select “Store”. • To change the speed-dial number, enterthe desired speed-dial number. The speed-dial number stops flashing. 4. At the next screen, enter the Private ID number asso-ciated with the name that you entered then select “Store”. To skip the Private ID number entry, select “Skip”.ExampleTo store the name “TIM”:1. Enter “T” by pressing once.2. Enter “I” by pressing three times.3. Enter “M” by pressing once. 120=Phone/Prvt List Ok Exit 201Available98 Phone #3 Prvt IDs1Enter Name- Store Exit 8461Enter PhoneNumber Store Skip1TIMSpd#=3 Store Cancl 1Enter PrvtIDSkip Store
24Pause Digit EntryWhen storing a number, you can program your phone so that it will not only dial a number but also pause and enter another series of numbers such as a personal identification number (PIN) or password. This feature is particularly useful for automated services such as voice mail and banking systems.Here’s how it works: Let’s say you have a company voice mail account that you frequently check while on travel. And, to access that account currently you must do the following:• Dial your work number;• Press * while the voice mail greeting is being played; and • Enter your PIN to access your messages.You can program your r750plus phone to enter all of the above information for you. All you have to do is separate each entry with a pause. If you were to program your phone to input the above information, the stored data would look like this: 17035551234P1234. In this example, the first eleven digits represent the number that must be dialed to access your voice mail. The P represents a 3 second pause. The last four digits represent your PIN.You can use this feature not only to enter PINs and passwords but also to have the phone automatically select menu options (i.e., press 1 to hear messages).To create a three-second pause follow the steps below:•Press and hold for two seconds. The pause symbol (P) will appear.NOTE: You can enter up to 20 numbers/characters in a single entry, stored or dialed. If you use a system that will not let you enter an option until the automated message has played in its entirety, you can program your phone to pause for more than 3 seconds. For example, performing the above step twice will program two pauses and cause your phone to wait 6 seconds before entering the next set of numbers.Editing and Erasing Phone List Entries1. Press , , , . 2. Select “Ok”. The “Edit Entry?” screen displays.3. Do one of the following:a. To edit an entry, select “Ok”. (1) At the “Edit Entry” screen, press until the desired entry appears, then select “OK.(2) At the “Edit Number” screen, edit the phone number, if you wish, then select “Store”.(3) At the “Edit Name” screen, edit the name, if you wish, then select “Store”.21
Creating, Editing, and Using Stored Lists25(4) At the “Edit Spd#” screen, edit the speed number, if you wish, then select “Store”.b. To erase an entry:(1) At the “Edit Entry” screen, press or (2) At the “Erase Entry” screen, select “Ok”.(3) Scroll to the desired entry, then select “Ok”. At the “Erase Entry?” screen, select “Yes”.4. Select “Exit” to close the Phone List Edit screen.Editing and Erasing Private ID List Entries1. Press , , , . 2. Select “Ok”. The “Edit Entry?” screen displays. 3. Do one of the following:a. To edit an entry, select “Ok”. (1) At the “Edit Entry” screen, press until the desired entry appears, then select “OK.(2) At the “Edit ID” screen, edit the number, if you wish, then select “Store”.(3) At the “Edit Name” screen, edit the name, if you wish, then select “Store”.b. To erase an entry at the “Edit Entry” screen, press or once, then select “Ok”. Press to scroll to the desired entry, then select “Ok”. At the “Erase Entry?” screen, select “Yes”.4. Select “Exit” to close the Private ID List Edit screen.2 2
26Last 10 Calls Received and Sent ListsIf you subscribe to your carrier’s Caller ID service, you can view, dial, and store the list of the last ten phone numbers received and the last ten phone numbers dialed. The most recent call sent or received appears first in your call list.From the Phone Ready screen: 1. Press . The menu options change to “Calls” and “Spd#”.2. Select “Calls”. The Rcvd Calls screen opens. If the “Store” option appears, the number currently dis-played is not in your Phone list. To add the number to your list, select “Store”.If you want to see the Sent list but the “Store” option is on your display, press until you see the “Sent” menu option.3. Do one of the following:• To view the Calls Received list, use the Scroll key to view each entry.If the “Store” option is on your display, press until you see the “Rcvd” menu option.• Or, to view the Calls Sent list, select “Sent”. Use the Scroll key to view each entry.4. To view the Calls Received list again, select “Rcvd”.5. To close the Calls list, select “Cancl”.Quickstore of Phone Numbers If you subscribe to your carrier’s Caller ID service, you can use Quickstore to store the last number that you dialed or quickly store a number from the Last 10 Calls Received and Sent Lists without having to enter the programming menu.NOTE: As you scroll through the Last 10 Calls Received or Sent List, only the name displays. If the name is not available, the phone number displays.To use Phone Number Quickstore, from either the Phone Ready screen or from the Last 10 Calls Received or Sent List:1. Do one of the following:• To go to the last call that you dialed, press .• To view the Received and Sent Calls list,press until you see “Calls”, then select it.1Phone ReadyLine112:55p 10/18 Spd# Calls1Rcvd Calls1=555444412:55p 10/18 Store Cancl 1Rcvd Calls2=MAILBOX12:56 10/18 Sent Cancl 1Sent Calls1=JOHN12:56p 10/18 Rcvd Cancl 1Phone ReadyLine112:43p 07/22 Mail Name Calls
Creating, Editing, and Using Stored Lists272. Select “Store”. The Enter Name screen displays. 3. Enter the name then select “Store”.The combined name and number entry is stored in the first available storage space.The Stored message displays with the name that you stored. 1Phone Ready0=5554455 Store Cancl 1Enter Name- Store Cancl 1JOHN5551212Stored
28Making Private CallsA Private call is a one-to-one conversation between two people. In Private mode, each phone is identified by a name or a number called a Private ID.To make a Private Call:1. Press until you see “Prvt Ready” on your dis-play.2. Use the keypad to enter the Private ID of the person that you want to reach.3. To speak, press and hold the PTT button, wait for the chirp, then speak into the microphone.4. To listen, release the PTT button.To use Scroll or Name Search, you must have a Private ID list.Scroll1. Press until you see “Prvt Ready” on your display.2. Press or to scroll through the stored Private ID list.3. Press and hold the PTT button, wait for the chirp, then speak into the microphone.Name Search1. Press until you see “Prvt Ready” on your display.2. Select “Name”.3. Press the key with the first letter of the name you are searching for.4. Press or to scroll through other stored names associated with the letter you entered.5. Press and hold the PTT button, wait for the chirp, then speak into the microphone.Receiving a Private CallWhen you receive an incoming Private call, you hear a brief chirp-like tone. Your r750plus phone automatically switches to Private mode, and the Private ID or the name of the caller displays.1. Your phone must be idle, that is, not busy in an active call or on the browser.2. Wait for the caller to finish speaking.3. Press and hold the PTT button. Begin speaking after you hear the chirp.1Prvt ReadyJOHN SMITH12:43p 07/22 Name Alert
Making Private Calls29Private/Group Mode SpeakerYou can hear Private calls through either the earpiece or the speaker. Press the Speaker button on your r750plus phone to turn the Private/Group Mode Speaker on or off.• With the Speaker on, you will hear incoming calls through the speaker.• With the Speaker off, you will hear incoming calls through the earpiece.Call AlertCall Alert enables you to page an individual by sending an audible tone. A Call Alert allows the individual to respond when it is convenient. The alert plays intermittently until the individual clears it.Selecting a Call Alert Tone StyleYour phone has ten selectable Call Alert tones.Setting an Alert Tone Style 1. Press , , , .The display shows you the current Alert tone.2. Select “Ok”. 3. Press or to scroll through the available Alert tone styles.4. To listen to the selected Alert tone, press the Volume buttons on the side of the phone. 5. Select “Ok” to select the Alert tone shown. To leave the Alert tone style unchanged, select “Cancl”6. Select “Exit”.Sending a Call Alert1. Press to go to the “Prvt Ready” screen.2. Select “Alert”.3. Enter the Private ID, or press or to scroll to the desired name. You may also select the name by pressing and using Name Search.4. Press the PTT button.137=Set AlertStyle:1 Ok Exit 371AlertStyle 4 Ok Cancl 1Prvt ReadyJOHN12:43p 07/22 Name Alert 1Alert 0JOHN Queue Exit
30Receiving a Call AlertWhen you receive a Call Alert, you will hear an alert tone and see a message on your display.• To answer the Call Alert, press the PTT button.• To clear the Call Alert without answering it, select “Clear”.• To silence the Call Alert without clearing it, press any key other than the PTT button.NOTE: Until the Call Alert is cleared or returned, the alert plays intermit-tently and you will not be able to receive any additional Phone, Private, Group, or Net calls.Call Alert QueuingIf your carrier provides Call Alert Queuing, you can save up to eight Call Alerts in a queue for later use.After you respond to the Call Alert, it is removed from the queue.Clearing or Queueing a Call AlertWhen you receive a Call Alert, do one of the following:• To clear a Call Alert, select “Clear”.• To place the Call Alert into the queue, select “Queue”. Pressing also queues the Call Alert.If you receive multiple Call Alerts, the last received Call Alert displays and the remaining Call Alerts are stacked at the beginning of the queue.Responding to a Queued Call AlertYou can respond to the Call Alerts in any order. To select a Call Alert for response:1. Select “Queue”.2. Press l or r to scroll to the desired Call Alert.3. Press the PTT button to respond to the Call Alert.1Alert 3JOHN SMITH Queue Clear
Making Private Calls31Quickstore of Private IDsQuickstore allows you to quickly store a received or sent Private ID, without having to enter the programming menu.From the Private Ready screen, with the Private ID displayed:1. Select “Store”. If an ID is greater than 12 characters in length, the ID wraps to the third line.2. Enter the name associated with the Private ID.3. Select “Store”. The Stored message displays.If the list is full with the maximum 100 entries, you will get the message, “Prvt List Full”. You cannot add names until you remove some names from the list. 4. Next, the display returns to the Private Ready mode.Storing Your Private IDNOTE: For non-Crossfleet enabled networks only.To store your Private ID in your r750plus phone:1. Press , , . The screen displays the message, “2=Own Pvt ID”.2. Select “Ok”.3. Enter the Private ID provided by your carrier.4. Select “Store”.To view your Private ID at any time after you store it:1. Press , , . The screen displays the message, “2=Own Pvt ID”. The next line displays your Private ID. This is the number supplied by your carrier that you store in your phone.2. Select “Exit”.1Prvt Ready5678112:43p 07/22Alert Store1Enter Name-Cancl Store1JOHNStored1Prvt ReadyJOHN12:43p 07/22Alert Name 22 Name
32Making Group CallsA Group Call allows you to communicate instantly with members of a selected Talkgroup–a pre-defined set of people who share a communication need.Talkgroups appear on your display as numbers or programmed names, such as Talkgrp10 or Sales Team.To make a Group Call:1. Press until “Group Ready” displays. Your most recently used talkgroup displays, for example, “Talkgrp 10”.2. To place a call, do one of the following:• To speak to this talkgroup, press and hold the PTT button. Wait for the chirp, then speak into the microphone.• To speak to another talkgroup, press l or r until you see the desired talkgroup name. Press and hold the PTT button. Wait for the chirp, then speak into the microphone.3. To listen, release the PTT button.Receiving a Group CallWhen you receive an incoming Group call, you will hear a brief chirp-like tone. Your r750plus phone automatically switches to Group mode, and the Talkgroup name displays.1. Your phone must be idle, that is, not busy in an active call or on the browser.2. Wait for the caller to finish speaking, then press and hold the PTT button. Begin speaking after you hear the chirp.3. To listen, release the PTT button.You can receive group calls only in the Talkgroups that you are provisioned for. For more information, see “Adding or Storing a Talkgroup” on Page 32.Adding and Storing a TalkgroupTo add and store a talkgroup name to your r750plus phone:1. Press , , .2. Select “Ok”.3. At “Add New Entry?”, select “Ok”.4. At “Enter ID”, enter the desired talkgroup number and select “Store”.5. At “Enter Name”, enter a name for the talkgroup and select “Store”.1Group Ready1:Tg1Off Sts23
Making Group Calls33Area SelectionIn Group mode, you can call only those talkgroup members in a specific location. This is useful when you know where the individuals are located within the service area.1. Press until you see “Group Ready” on your display.2. Press , then select “Area”.3. Press or to scroll through the targeted areas specified by your local carrier.4. Select “Ok” to select the targeted area.Private/Group Mode SpeakerYou can hear Group calls through either the earpiece or the speaker.Press the Speaker button on the r750plus phone to turn the Private/Group Mode Speaker on or off.With the Speaker on, you will hear incoming calls through the speaker. This is useful to monitor talkgroup activity in Group mode.With the Speaker off, you will hear incoming calls through the earpiece.
34Advanced FeaturesSome r750plus phones are provided with an advanced feature set as described in this section. Please contact your service provider for more information.Multi-Simultaneous Talk Group ScanMulti-Simultaneous Talkgroup Scan (Scan) allows users within a fleet to monitor more than one talkgroup. A Talkgroup Mode, within the range of 1-255, is comprised of up to four talkgroups (one Primary Talkgroup and up to three Secondary Talkgroups). Calls can only be initiated on the user’s Primary Talkgroup; however, a user can respond to an active call on either a Primary or Secondary Talkgroup. Both Primary and Secondary Talkgroups, as well as the Talkgroup Mode, can be named (aliased). The Scan feature is set to “ON”, but the user has the capability of disabling Scan through an option key. The unit will store the last Scan setting, and power on with that setting.Entering Group Mode1. Press the f key to power on your unit. Press to enter Group Mode.Two different Talkgroup Modes are displayed below. The Primary Talkgroup is indicated to the right of the Talkgroup Mode. The display on the left shows a non-aliased Primary Talkgroup, and the display on the right shows an aliased Primary Talkgroup.Group Ready102:Tg 15S Off StsGroup Ready3:ElectriciaS Off StsPrimary TalkgroupNot Aliased Primary Talkgroup AliasedGroup Ready3:ElectriciaGroup Ready102:Tg 15S.Off Sts S.Off Sts
Advanced Features35Initiating a Group Call1. Press and hold the PTT button to initiate a group call on your Primary Talkgroup.The example to the right illustrates the display if Fred pressed the PTT button to initiate a call on the Electricians talkgroup. This is Fred’s Primary Talkgroup for Mode 3.All subscriber units that have affiliated with your Primary Talkgroup as either a Primary or Secondary Talkgroup in any Talkgroup Mode will receive your group call if they are not already engaged in an active call.The following screens will be displayed on the receiver subscriber units indicating they have joined the call. The second line of the display will indicate the Mode number followed by Primary or Secondary Talkgroup, which may be aliased. The third line of the display indicates the PTT-ID of the unit initiating the group call, which can also be aliased.Example: Jason joins the Electricians talkgroup. He has also selected Electricians as his Primary Talkgroup for Talkgroup 3, but he has no alias for his talkgroup, so the Talkgroup number (TG ID) is displayed. Fred’s PTT-ID is displayed on the third line.Example: Julie joins the call and the unit updates the alias to indicate active Secondary Talkgroup (Mode 1, Secondary Talkgroup 3). Fred’s PTT-ID is displayed on the third line.Responding to a Secondary Talkgroup1. To respond to a call on a Secondary Talkgroup, press the PTT button.Example: Julie responds to Fred by pressing the PTT button.Group Ready3:ElectriciaFred’s DisplayS.Off StsGroup Ready3:Tg 3ID:FredJason’s DisplayS.Off StsGroup Ready1:ElectriciaID:FredJulie’s DisplayS.Off StsGroup Ready1:ElectriciaJulie’s Display S.Off Sts
36Fred has released his PTT button, then begins to receive Julie’s response.Jason receives Julies’s response.After the Secondary Talkgroup call is completed, all receiving subscriber units’ displays will revert to their Primary Talkgroup of the selected Talkgroup Mode.Turning Scan On and OffThe capability to turn scan on and off is available as an option key.1. Press the “Scan” option key. Press the “S Off” soft option key to disable scan.When Scan is disabled, you will not have access to your Secondary TalkgroupsAliasing Talkgroup ModeThe r750plus phone allows you to Alias Talkgroup Modes and Primary and Secondary Talkgroups.1. Press , , .2. Select “Ok”.3. At “Add New Entry” select “Ok”.NOTE: Press or to Edit or Erase a Talkgroup Mode Alias.4. Enter the ID of the desired talkgroup mode and press “Store”.NOTE: The Aliased Modes are displayed only while scrolling through the Talk-group Mode or during Direct Entry. In an idle or transmission state, the Mode ID number is displayed. This ensures that the Mode ID num-ber and Primary Talkgroup are displayed simultaneously on screen.5. Then enter the name of the desired talkgroup mode alias and press “Store”.Group Ready3:ElectriciaFred’s DisplayS.Off StsGroup Ready3:Tg 3Jason’s Display S.Off StsGroup Ready Group Ready3:ElectriciaScan DisabledGroup Ready18-EngineersGroup Ready18:EngineersScan EnabledS.Off Sts S.Off Sts25
Advanced Features37Talkgroup Mode Selection by Direct EntryYou may select a different Talkgroup Mode at any time.1. Press the , key. To erase a digit, press . To clear all digits, press and hold . To return to your previously selected Talkgroup Mode, press the “Cancl” option key.2. Press the key.3. Press the PTT button or the “Ok” option key. “Mode 18” will flash until affiliation is complete. If you selected the Talkgroup Mode by pressing the PTT button, you will initiate a call on your Primary Talkgroup.Talkgroup Mode Selection by Memory ScrollThe Memory Scroll feature allows you to use the or keys to scroll through memory for Talkgroup Modes.1. Press r. Press and hold this key to Auto Scroll through your lists more quickly.2. Press the PTT button or the “Ok” option key.NOTE:To transmit, press the PTT button; to listen only, press “Ok”.Emergency Group CallNOTE: If your r750plus phone has an orange button on top of the housing, the Emergency Call feature is present.Emergency Group Call is a carrier-dependent feature. Please contact your carrier for service availability.Placing an Emergency Group CallAn Emergency Group Call allows a user to have priority access to his talkgroup members and provide them visual and audible indications of an emergency condition. The Emergency call can be placed from any mode (private, group, phone, Net).1. Press and hold the Emergency Button. The portable will emit an emergency start tone to indicate that you have successfully requested an emergency call.2. Press the PTT button to talk. The currently selected Talkgroup Mode will be selected unless your orga-nization pre-programmed an emergency Talkgroup Mode. If this is the case, the pre-programmed Emergency Talkgroup Mode will flash in the dis-1Group Ready18_Cancl Ok8Group ReadyMode 18Cancl OkEMERGENCY1: SE PlantID:John
38play. The Talkgroup Mode appears in the second line of the display as shown.3. To end an emergency call, press and hold the Emergency Button for 3 sec-onds. The portable will return to the last selected talkgroup mode. The ini-tiator cannot exit the emergency call without first cancelling the emergency call.Canceling an Emergency Group CallPress the Emergency Button until the unit generates an Emergency Call Cancel tone. This tone indicates the cancellation has occurred. The display will return to the non-emergency state.An emergency call will be cancelled if no talkgroup activity occurs for 30 seconds. The dispatcher, or any other person provisioned to cancel an emergency call can also cancel the emergency call.Receiving an Emergency Group CallWhen an emergency call is initiated, other members of the talkgroup will be notified of an emergency condition.The receiving unit will hear an Emergency Receive Tone, and the receiver’s display will change to indicate the condition.The first line of the display will indicate the ID or alias of the person initiating the emergency call. The second line will show you the Talkgroup Mode and Active Talkgroup name or number. The third line shows you the ID or alias of the person who is currently speaking. The third line will remain blank when the receiving unit initiates a transmission.Receiver Operations During an Emergency CallOther members of the Emergency Group Call can leave the emergency call and change modes (phone, group, private, Net) while involved in the call.While listening to the emergency call, the receiving unit will not receive phone calls, Call Alerts, Message Mails, Status Messages, Private Calls or other group calls for the duration of the emergency call.Status MessageStatus Message lets you send a pre-defined message to the dispatcher or to another user’s ID. Up to ten pre-defined alphanumeric Status Messages are available such as “At Lunch” or “En Route”.EMER:581:SE PlantID:CherylS.Off Sts
Advanced Features39You can also send any numeric Status Message from 1-255. A Status Message can be sent by selecting both the Status Message and target ID (alias) of the person who is to receive the Status Message. You can reduce talk time by sending Status Messages. You can also leave a Status Message for receivers while they are away from their portables.Entering the Status Message Function1. Press the Status Option Key to get to the Status Message function. You must be in Group or Private Mode to access this function.The second line of the display shows the Status Mes-sage (alpha or numeric) of the last successfully sent status.2. Press Option “Exit” to return to either the group or Private mode. Press Option “Targt” to go to the Target ID selection screen.Selecting a Status Message with Direct EntryDirect Entry allows you to use the keypad to select the message you want to send. Enter any number from 1-255 to select a Status Message. The number can correspond to one of ten pre-programmed alphanumeric status messages or any other numeric Status Message within the range of 1-255.1. Press 2.2. Press “Ok”. Pressing the PTT button at this time will send the message to the last unit to which you sent a successful message.3. Press “Targt” to select a target for this message.Sts MessageEn RouteExit TargtSts Message2= At LunchCancl Ok
40Selecting a Status Message Using Memory ScrollYou can select Status Messages by using the or keys to scroll through the ten named (aliased) Status Messages which you have programmed.1. Press the until you find the message you want. In this case we scrolled to the Status Message “At Lunch”.2. Press “Ok”.3. Press “Targt” to select a target for this message.Selecting a Target by Direct Entry1. Enter the numeric ID of the person to whom you are sending the message.2. Press “Ok”.3. Press the PTT button to send the message to the selected ID.Selecting a Target by Memory ScrollYou can select a target by scrolling though the portable IDs or aliases by using the or keys.1. Press the or key until you find the person to whom you want to send the message.2. Press “Ok”.3. Press the PTT button. The display shows the mes-sage that has been sent.Selecting a Target by Alpha SearchYou can select a portable ID by selecting the first letter of the name (alias). If no name is stored under a letter, the unit will automatically search forward, alphabetically, until the next name is found.1. Press the “Name” key.2. Press a numeric key. i.e.: Press three times to view the names (aliases) that begin with the letter R.3. Use either the or keys to scroll to the name (alias) who is to receive the Status Message.4. Press the PTT button. The display shows the message that has been sent.Sts MessageAt LunchCancl OkSts Target5= RochelleCancl OkSts TargetJulieCancl OkName:StsR=RandyCancl Ok7
Advanced Features41Sending a Status MessageAfter selecting both a Status Message and a desired target ID, press the PTT button to send the message. Two high pitched tones will be heard during transmission.If successful, two high pitched tones will be heard to indicate the message was successfully delivered to the target portable.If unsuccessful, an alert tone will be heard to indicate that the targeted unit is busy, out-of-range, or turned-off.In either case, the portable will return to the status screen after 3 seconds.Exiting the Status Message FunctionPress the key to exit the Status Message screen. Pressing the “Exit” option key from the Status Message screen will also allow you to exit the status message function.Receiving a Status MessageThe portable will receive a message along with alert tones. To silence the recurring alert tones only, press any key except or the “Clear” option key. In case of a non-aliased sender ID, the Quickstore option is available.If a non-aliased ID is sent, the Quickstore softkey is displayed.All calls remain blocked until this message is cleared.ID List ProgrammingFeature menu #26 allows you to program ten status messages, each up to 12 characters long.Sts-SentSuccessfulUser NotAvailableSts-KellyAt LunchClear26=Sts MesgList Program Exit Ok Ok
42Isolated Site OperationIsolated Site Operation (ISO) allows group call communications to continue within a single cell site when connectivity to the network is lost by allowing the cell to operate in a local, one cell only mode. ISO is limited to dispatch talkgroup calls only. In all modes the display will update to include “-Isoft” on the first line. Talkgroup communications will be limited to only those units that are connected to the ISO cell, and only on the talkgroup or Talkgroup Mode that the subscriber unit last used before the cell entered the ISO state.Entering ISOThe portable will enter the ISO state when its cell becomes isolated from the network, assuming the portable has no available neighbor cells. It will display one of the following screens: (The LED indicator is off in ISO unless the unit is transmitting. While transmitting, the LED will be green.)NOTE:If the portable is powered on in an ISO cell, it will enter the ISO state if there are no available neighbor cells.Phone ModeGroup Call ModePrivate Call ModeNet ModePhone-IsoftName MailGroup-Isoft3:ElectriciaS.Off StsPrvt-IsoftJulie Alert NameExit TargtNet-Isoft
Advanced Features43Initiating a Group CallIf the portable has Scan enabled when the site enters ISO, the portable will be able to initiate a call on its Primary Talkgroup and can respond to calls started on either the Primary or any Secondary Talkgroup.The portable will not be able to select a new Talkgroup Mode while in ISO condition.If the portable has Scan disabled when the site enters ISO, the portable will be able to initiate and respond to calls on the Primary Talkgroup only.Exiting ISOWhen the cell returns to normal operation, the unit will revert back to standard operation. The green LED indicator will resume blinking.If the unit goes out of range of the ISO cell and has no available neighbor cells, the unit will go out of service.Other OperationsSince the ISO operation is limited to group calls only, any attempts to communicate in other modes (phone, private, alert, status) will result in a “Service Not Available” message. However, all other functions (memory scroll, direct entry, feature menu programming, etc.) are still operable.Group-Isoft3:ElectriciaS.Off StsGroup Ready3:ElectriciaS.Off Sts
44Using Mail ServicesNOTE: Some features may be network dependent or subscription only, and may not be available in all areas. Contact your service provider for more information.Your r750plus phone provides the following mail services:• Net Mail• Voice Mail• Message MailWhen you receive a new message, the icon appears and flashes.• To read your new mail immediately, select “Now”.• To read your new mail later, select “Later”.An asterisk * next to a mail service indicates new mail.To use message services, select “Mail” from any Ready screen. The inbox screen opens with your message services listed.To select a message service, scroll to highlight the service or press the corresponding number. For example, to access your Message Mail, press 2.Net MailNet Mail alerts you when you receive alerts from the Browser, for example, notification of an e-mail or fax.From any mode:1. Select “Mail”. 2. Select “Net Mail”, then select “Ok”.The Alerts inbox opens and displays the type of Net Mail alerts.The Inbox screen opens.3. Scroll to the type of alert that you wish to view, then select “Ok”.New MailRead?Later Now 1>Voice Mail 3>Net Mail 2>Mesg MailExit Ok11>Voice Mail2>Mesg Mail 3>Net MailExit Ok1Inbox 1. Email2 FaxOk Del
Using Mail Services45 4. To read the message, select “View”.5. After you read the message, do one of the following:• Select “Menu” to view a list of actions that you can take for this message, such as reply, delete, save, and so forth.• Or, select “Next” to read the next message.Voice MailWhen your r750plus phone receives a Voice Mail message:• The icon appears on your display.• The Voice Mail alert tone sounds (if Mail Notification is turned on).• The message, “New Voice Mail Waiting” appears on your display.• An exclamation point (!) on the display indicates that you have at least one urgent message.From any mode:1. Select “Mail”.2. Select “Voice Mail”.The Voice Mail inbox opens and displays the number of your new and total Voice Mail messages.To retrieve your voice mail immediately:1. Select “Dial”. This action automatically places a call to your voice mailbox. The most recent message is retrieved first.2. To close your voice mailbox, select “Exit”.Alert Receipt During Phone CallThrough your programming menu (*,#, 15) you can delay Voice Mail and Message Mail Alerts so that you are not interrupted by the alert tone while on a call. You can choose the following:•Receive All Alerts• Delay All Alerts1Inbox:1unread1*Lunch 2 MEETING View Menu1LUNCH----With client at12:00 Next Menu11>Reply4>GoTo Message2>Delete3>Save Ok Menu12>Mesg Mail3>Net Mail 1>Voice Exit Ok1Voice Mail 1 New 1 Total Exit Dial Alert Menu
46• Receive Message Mail Alerts onlySee “Setting Programming Menus” on page 49 for more information.Message MailMessage Mail can be either a numeric page or a text message of up to 140 characters. Your phone can receive and store 16 mail messages at any time.1. To postpone reading your mail and to clear the display, select “Later”. The icon stops flashing but remains on your display to remind you that you have unread messages.To read your mail now:2. Select “Now”. The screen will briefly display the number of new and saved messages in your mailbox.3. A list of all your messages will display. Highlight the message that you wish to read and select “Read”.To read you mail later:4. From any mode, select “Mail”. The Mailbox opens.5. Select “Mesg Mail”.Your message mailbox opens and briefly displays the number of new and saved messages currently in your mailbox.Next, a list of all messages will display. Select the message that you wish to read and select “Read”.Saving and Erasing MailYour message shows the time and date that the sender entered it in the networkAfter you read a text or numeric message, you can either Save or Erase the message. Press under the desired option.11>Voice Mail3>Net Mail2>Mesg Mail Exit Ok1Message Mail 2 New 0 Saved1*2>FR: Jones*>FR: Smith Exit Read11>Call555121211:15a 04/02Erase Save
Using Mail Services47Auto Call BackYou can respond to numeric pages and text messages containing a call-back number. To automatically dial a number contained within a Message Mail, press .Mail Memory FullIf all 16 message registers are full, your phone displays the message “Mail Waiting, Memory Full”. You cannot receive new Message Mail until you empty register space by erasing saved or unread messages.
48Using Your Phone as a ModemNOTE: Some features may be network dependent or subscription only, and may not be available in all areas. Contact your service provider for more information.You can use your r750plus phone as a modem for data transfer from your laptop, handheld device, or desktop computer. This is particularly useful when there is no wired phone line (wall jack) available.You simply attach a data cable (available separately) to your phone and your computer. From that point, your phone is your modem. This allows you to send or receive time-critical information such as e-mail, a field service report, or files. In addition, you can also send or receive faxes.This type of wireless connection uses one of two types of data connection: circuit-switched data and packet data.• Circuit-switched data is typically used for sending and receiving faxes and for transferring large files.• Packet data is used for small file transfers such as e-mail.To use these services, you must install the iDEN Wireless Data Services software (available separately). For more information on setting up your computer and your r750plus phone for Packet and Circuit Data calls, see the Wireless Data Services User’s Guide and contact your carrier.TTY UsersYou can use your phone and computer in TTY mode. Your computer screen and keyboard replace the standard TTY device. For more information, please see the Wireless Data Services User’s Guide.
Setting Programming Menus49Setting Programming MenusYou can customize the settings on your phone using the Programming Menu.1. Press until you see “Prgm” on the display.2. Select “Prgm”.3. Select “Ok”.4. Press or to scroll to the desired Programming Menu Option or enter the number of the Option.NOTE: You can press , , and then the corresponding keypad num-ber to get to the desired programming menu. Table 6: Programming Menu Options Keypad Number Menu Option Function 1 Own Ph # Automatically store the telephone number of your phone after you receive the first incoming call (Line1). You can also enter the number and view it. 2 Own Pvt ID Display the private number of your phone. 3 Mail Display Turn on and off the New Mail message that is displayed with incoming Voice, Message, or Net Mail. 4 Manual Lock:Off Lock your phone to prevent unauthorized use. You must enter a pass code to unlock it. 5 Auto Lock:Off Automatically lock your phone each time it is powered on to prevent unauthorized use. 6 Auto Answer:Off Turn on or off automatic answering of incoming phone calls after 1-4 rings.
50 9 Vibrate Alert:Off Receive a non-audible alert for incoming phone and circuit data calls and messages. See “VibraCall® Alert” on page 15.10 Last Call Timer Display the duration of the most recent phone call.11 Display Timer:Off Turn on or off automatic display of the Last Call Timer at the end of each phone call.12 Reset Timer Display cumulative airtime of all phone calls since last reset.13 Total Timer Display cumulative airtime of all phone calls.14 1 Minute Beep:Off Automatically signal each minute of elapsed phone airtime with an audible beep. 15 Alert Receipt Delay Voice Mail and Message Mail Alerts so that users are not interrupted by the alert tone while on a call. Users can choose to: Delay All Alerts; Receive All Alerts; Receive Message Mail Alerts only. See “Alert Receipt During Phone Call” on page 45.16 Backlight Timer Specify the duration of the Backlight Timer (0, 10, 20, or 30 seconds).20 Phone/Prvt List Add phone and private numbers in one procedure. See “Combined Phone Number and Private ID List” on page 22.Table 6: Programming Menu Options (Continued)Keypad Number Menu Option Function
Setting Programming Menus5121 Phone List Edit Edit and erase up to 100 frequently called phone numbers and associated names. See “Editing and Erasing Phone List Entries” on page 24.22 Prvt ID List Edit Edit and erase up to 100 Private numbers and associated names. See “Editing and Erasing Private ID List Entries” on page 25.23 Talkgrp List Program Add/Edit/Erase numbers and associated names for up to 100 pre-programmed talkgroups. See “Adding and Storing a Talkgroup” on page 3224 Area List Program Add/Edit/Erase numbers and associated names for up to 50 targeted areas.25 Talkgroup Mode List Program Add/Edit/Erase numbers and associated names for up to 30 pre-programmed talkgroup modes.26 Status Message List Programming Add/Edit/Erase numbers and associated names for up to 10 alphanumeric Status Messages.30 Ringer Volume Set the ringer volume using the volume control keys, or lower the volume to silence the ringer. See “Setting the Ringer Volume” on page 16.31 Set Ring Style Select a distinct ring style for incoming phone calls. See “Setting a Ring Style for the Alternate Line” on page 16.Table 6: Programming Menu Options (Continued)Keypad Number Menu Option Function
5232 Mail Volume Set the volume of incoming Message Mail, Voice Mail, and Net alert tones using the volume control keys, or lower the volume to silence the mail alert tones.33 Earpiece Volume Set the default earpiece volume using the volume control keys.34 Keypad Volume Set the volume of the keypad tones using the volume control keys, or to silence the keypad tones.35 Speaker Volume Temporarily adjust the Group/Private Speaker volume for noisy environments.36 Spkr Vol Set Tone Turn the speaker volume set tones on or off.37 Set Alert Style Select a distinct Call Alert tone. See “Selecting a Call Alert Tone Style” on page 29.38 Silent Group Silence all incoming Group call alerts and voice activity. When set, your screen displays the message, Group-Silent.40 Change Passcode Change your secret four-digit pass code from the initial setting 0000.60 Set Baud Rate Set the modem baud rate between the phone and the PC. See the Wireless Data Services User’s Guide.61 Data Ring Volume Set the default data ringer volume using the volume control buttons. See the Wireless Data Services User’s Guide. Table 6: Programming Menu Options (Continued)Keypad Number Menu Option Function
Setting Programming Menus53NOTE: Important! Do not perform the following shaded menu options unless you are instructed to do so by your carrier. You could damage your phone. 62 Pgm Data # View your circuit data (fax) number. See the Wireless Data Services User’s Guide.63 IP Address Use the scroll keys to view the Internet Protocol (IP) Address-1 for your browser, as programmed in your phone. If your phone is cabled to a computer, view IP Address-2, the stored IP address of your computer.See the Wireless Data Services User’s Guide.64 Reset KBytes Tx/Rx View the number of Kilobytes sent and received for packet data. See the Wireless Data Services User’s Guide.65 Lines per Screen(Browser and Mail menu)View the display in 4 lines, 12 characters or 6 lines, 16 characters.70 Language Select one of four languages for your display text. The default is English. See “Changing the Display Language” on page 11.71 Time/Date Select the format for the time and date display. See “Setting the Time and Date” on page 9.Table 6: Programming Menu Options (Continued)Keypad Number Menu Option Function
54 About Error CodesYou may receive operational status messages under certain conditions. Before contacting your carrier, note the message, numeric code, and the conditions under which it appeared. Table 8 lists and describes the operational status messages. Table 7: Other Programming Menu Options Option Number Menu Option Function41 Feature Reset Returns all feature settings to their original defaults.42 Master Clear Performs Feature Reset and erases all stored lists.43 Master Reset Resets the phone’s identification number.44 Change Service Key Changes or resets the fraud prevention service key.50 NAM Selects alternate Numeric Assignment Module (NAM). See local carrier for information. 51 Network ID Edits the pre-programmed Network number list and selects roaming options.Table 8: Error Codes Status Messages Message DescriptionNumber Not in Service The number that you entered is not valid.User Not Available The party that you called is either busy, out-of-range, or turned off. Please try again later.
Setting Programming Menus55User Not Authorized The party that you called has not purchased this service.Please Try Later This service is temporarily not available. Please try again later.User Busy in Private The party that you called is busy in a Private call.Service Restricted This service was restricted by your carrier or it was not purchased.Service Not Available This feature is not available on the current network.System Busy Try Later The system is experiencing heavy traffic. Please try again later.Service Conflict This service cannot be enabled because an incompatible service has already been turned on.Please Try Again An error occurred. Note the error code and try again.User Busy in Data The party that you called is busy in a data call.Self Check Error A fault was detected with your phone. If this error recurs, note the error code and contact your carrier.Self Check Fail An operational fault was detected with your phone. Note the numeric code, turn your phone off, and contact your carrier immediately. Table 8: Error Codes (Continued)Status Messages Message Description
56 Optional AccessoriesBatteriesNOTE: For best results, charge the batteries within the temperature range of 10° C to 40° C (50° F to 104° F).NOTE: Prolonged charging is not recommended. See Table 9 for battery charg-ing guidelines.Charging the BatteryTo get the maximum use from the battery, charge it overnight before you use it for the first time. See Table 9 for battery charging times.Table 9: Battery Charging Times Battery Operating Instructions• Extreme temperatures will degrade battery performance. Do not store your battery where temperatures exceed 60°C (140°F) or fall below -20°C (4°F).• The battery capacity will be degraded if stored for long periods while fully charged. If long term storage is required, store at half capacity.• For optimal battery life, use a Motorola iDEN approved NiMH Charger with your Motorola iDEN NiMH battery. Other chargers may not fully charge your NiMH or may yield a reduced number of charge cycles.Motorola Battery Charging Time to 90%: Kit Number DescriptionChemistry RapidChargerNTN9037 NiMH 100 minutesNTN9038 Intrinsically Safe* NiMH* For users who work in hazardous environments, Intrinsically Safe Battery, NTN9038, is offered. Please contact your carrier for availability and the specific environments approved for this battery.100 minutes
Optional Accessories57Rapid Travel ChargerUsing the NTN9035 Rapid Travel Charger, you can charge a battery from an electrical outlet.Figure 2. Using the Travel ChargerUsing the Rapid Travel Charger (110V/220V/240V)1. While holding the r750plus phone with its front facing you, insert the accessory connector (with the Motorola logo facing you) into the slot on the bottom of the r750plus phone until you hear a click.2. Insert the Rapid Travel Charger transformer into an AC wall outlet. The power light (green LED) on the accessory power supply will come on.Rapid Travel Charger Operating SpecificationsInput voltage range: 110V/220V/240V.Operating temperature range: 0°C to +50°C.Rapid Travel ChargerAccessory Connector
58Vehicular Battery ChargerThe NTN9034 Vehicular Battery Charger enables in-vehicle communications by charging the NiMH battery and providing power to your r750plus phone. The power light (green LED) will light when the Vehicular Battery Charger is receiving power.Figure 3. Using the Vehicular Battery ChargerUsing the Vehicular Battery Charger1. Attach the Vehicular Battery Charger’s accessory connector to the bottom of the r750plus phone. While holding the r750plus phone with its front toward you, insert the accessory connector (with the Motorola logo facing you) into the slot on the bottom of the r750plus phone until you hear a click.2. Remove the vehicle’s cigarette lighter plug from the cigarette lighter recep-tacle.3. Plug the Vehicular Battery Charger into the cigarette lighter receptacle. The power light (green LED) will turn on.4. The r750plus phone may be turned off, turned on, or in use.Removing the Vehicular Battery Charger1. Unplug the Vehicular Battery Charger from the vehicle’s cigarette lighter receptacle.2. Press the buttons on the accessory connector and pull the accessory con-nector from the bottom of the r750plus phone. Operating SpecificationsOperating voltage range: 10.8 - 33.0 Vdc.Operating temperature range: -30°C to +60°CAccessory Connector
Optional Accessories59Desktop Dual-Pocket ChargerThe NTN9036 Desktop Dual-Pocket Charger charges Motorola authorized batteries, as listed on Page 56, for the r750plus phone.Figure 4. Desktop Dual-Pocket ChargerCharging a battery1. Plug the power supply DC jack of the fast charger modulus SPN4366C, into the receptacle in the back of the Desk-top Dual-Pocket Charger.2. Plug the transformer end of the of the fast charger modulus SPN4366C, into any standard AC wall outlet.3. Insert an r750plus phone with an attached battery, into the charger’s front pocket. To do this, align the slots on the sides of the battery with the rails on the sides of the charger pocket. Make sure the metal contacts on the back of the battery are in contact with the charger contacts.4. If the r750plus phone is properly seated in the front pocket, the charger’s front pocket LED indicator will light.5. The charger has the capability of displaying the battery’s charge status. The indicator will show the following: solid red=1- 30%; solid yellow=31 - 60%; flashing green=61 - 90%; solid green=91 - 100%.NOTE: Charging times may vary when performing data operations.Data Operation1. Insert the flat end of the iDEN Data Cable (NKN6522A) into the phone’s bottom Accessory connector.2. Connect the opposite end of the data cable to the PC.(DC jack)Rear pocket – Battery only Front pocket – phone with BatteryPin charge contactsLED indicatorsPower supply cord receptacleAlignment rails3. Use the Y data cable NKN6503B, for charging and data transfering simultaneously.
60Inserting and removing a battery from the rear pocketFigure 5. Adding and Removing a Battery from the Rear Pocket1. Insert the battery with the Motorola label facing forward. To do this, align the sides of the battery with the charger rails.2. Make sure the metal contacts on the back of the battery are in contact with the charging contacts.3. To remove the battery, pull it up and out of the Charger.NOTE: If a battery is in the rear pocket, and the phone with a battery is inserted into the front pocket, the battery in the front pocket will charge to full capacity before the battery in the rear pocket is charged. The LED for the rear pocket flashes yellow, indicating that its battery is waiting to be charged.NOTE: To remove the battery from the rear pocket, hold the base of the charger and pull the battery up.Desktop Charger StatusThe Charger displays the battery’s charge status. The indicator will show one of the following: solid red =1-30%; solid yellow =31-60%; flashing green =61-90%; solid green =91-100%.Desktop Charger TroubleshootingIf the battery is not charging and you see:Flashing yellow indicator -• The flashing yellow LED is used to indicate that the Charger’s pocket is in a wait state.• If a battery is in the rear pocket, the rear pocket’s LED continues to flash yellow until the battery in the front pocket is more than 90% charged (front pocket’s LED is solid green). This is normal operation.• To protect your battery’s life expectancy, the Charger does not rapid charge a battery when its temperature is below 5oC (41oF) or above 45oC (113oF).InsertRemove
Optional Accessories61No LED indication - • Check that the r750plus phone with battery, or a battery alone, is inserted correctly. • Make sure that the power supply is plugged into an appropriate AC outlet and that the connector is properly seated.• Rear pocket only: Remove the battery from the Charger. Use an ordinary pencil eraser to clean the three metal contacts on the battery and then place the battery in the Charger.• If the LED indicator remains turned OFF, the battery may be defective and should be replaced.Flashing red LED indicator -• Remove the battery from the Charger. Use an ordinary pencil eraser to clean the three metal contacts on the battery and then place the battery in the Charger.• If the LED indicator remains turned OFF, the battery may be defective and should be replaced.Both LEDs flash red -• This indicates that the incorrect power supply is plugged in.
62Audio AdapterThe FLN2854A Audio Adapter connects an earpiece microphone or headset to your r750plus phone for privacy and hands-free operation. The Audio Adapter fits onto the bottom of the r750plus phone and provides a standard 2.5mm jack connection for an earpiece microphone or headset. The following audio accessories are compatible with the audio adapter:• Earpiece with Microphone (NTN8367)• Heavy Duty Headset (NTN8513)• Lightweight Headset (NTN8496)• Headset Over the Ear Style (NTN8497)Figure 6. Using the Audio AdapterUsing the Audio Adapter1. Hold the phone and the Audio Adapter facing you so that you see the Motorola logo on the adapter.2. Insert the Audio Adapter’s connector into the r750plus phone Bottom Accessory Connector. You will hear the connector snap into place.NOTE: When the audio adapter and earpiece or headset are connected, all audio, including tones, will be routed to the audio accessory’s earpiece.Attaching/Detaching the Earpiece Microphone or Headset1. Insert the 2.5mm plug of the earpiece microphone or headset cord into the jack of the Audio Adapter. 2. Pull on the plug, not on the cord, to remove the earpiece microphone.Audio AdapterConnector2.5mm jackButtonReleaseButtonRelease
Optional Accessories63Removing the Audio Adapter1. Simultaneously press the release buttons located on either side of the Audio Adapter and pull the Audio Adapter from the r750plus phone.Battery Belt ClipThe Battery Belt Clip (HLN9844A) and the Large Belt Clip (HLN9714) provide a convenient means by which to carry your r750plus phone with you.Figure 7. Battery Belt ClipUsing the Battery Belt Clip1. Slide the belt clip into the back of the battery (push until the clip locks into place).2. Clip the r750plus phone to your belt.3. To remove the clip from the battery, push the holder tab outward and slide the clip out of the battery.NOTE: A small flathead screwdriver is recommended to push the holder tab outward when removing the clip.Carry Case*• The Carry Case FLN9580A or the Leather Carry Case RLN5372A protects your r750plus phone while on the go.• Includes a leather belt clip for easy attachment to a belt or purse*Remove the belt clip from the phone before inserting it into theCarry case.Battery (partial view)Belt Clip Tab
64• Accommodates most r750plus phone accessories including travel chargers, audio accessories, vehicle accessories, and data accessories.Hard-Install Car KitNOTE: The F2570A Hard-Install Car Kit enables in-vehicle communications by providing extended RF coverage, the ability to connect to 12-Vdc or 24-Vdc power sources, data interface, and the ability to rapid-charge the battery. Please note that the customer should purchase an external antenna.The F2570A includes:• External PTT Switch, Kit No. FLN9299A• External 4-watt Speaker, Kit No. FSN5526A• Power Cable, Kit No. FKN4901• Junction Box, Kit No. FLN2799A• Cradle for r750 VA, Kit No. FLN2810AAn external Push-To-Talk (PTT) button is also included. When the phone is turned off, the Hard-Install Car Kit charges the Standard battery in 75 minutes to 90% capacity. Charging time will be longer if the phone is operational during charge time.Figure 8. Hard-Install Car Kit
Optional Accessories65Remote Speaker/MicrophoneThe FLN2800A Remote Speaker/Microphone (RSM) provides a convenient means of communicating by having a speaker, a microphone, and a Push-to-Talk (PTT) button in a single, hand-held or clip-on accessory. The RSM also includes a 3.5 mm audio jack (located on the opposite side of the PTT) to accept secondary receiver audio accessories.Attaching and Removing the Swivel ClipTo attach the swivel clip to the remote speaker/microphone:1. Position the clip with the release tab pointing upward and align the metal plate edges of the swivel clip with the plastic slots on the RSM’s rear housing.2. While holding the clip open, slide the metal plate in and push down firmly until the parts snap together.To remove the swivel clip from the remote speaker/microphone:1. Carefully push the flat blade of a #2 slotted screw-driver (or similar instrument) between the RSM’s housing and the swivel clip’s metal release tab, as shown in the figure.2. While performing step 1, push the swivel clip toward the top of the RSM.3. As the release tab disengages, remove the screwdriver and pull the swivel clip completely away from the unit.Connecting the Remote Speaker/Microphone to the PortableTo attach the accessory connector, position the portable so that it faces you.Speaker /MicrophonePTT Button 3.5mm Audio JackAccessoryConnector
661.Position the accessory connector so that its coiled cord extends from the bottom of the por-table and its latch is on your left.2.Insert the RSM’s accessory connector into the bottom of the portable (push both tabs on the accessory connector when inserting into the por-table).3.Push the accessory connector firmly against the portable to make sure it is held in place.4.Attach the smaller end of the cable-restraint clip on the straight portion of the coiled cord.5.Attach the larger end of the cable-restraint clip to the base of the antenna.6. Adjust the cord length in the smaller end of the cable restraint clip until it is comfortable.OperationPlease read the safety information contained in the user’s guide supplied with the portable before operating this equipment.The remote speaker/microphone (RSM) only operates when the portable is in the voice-dispatch mode (group or private call).Wearing the RSMFor optimum performance from your RSM, wear the radio and RSM so that the accessory cord will not cross over or touch the antenna. Also, try to wear the radio and accessory combination fairly close to each other to avoid strain on the accessory connector.Receiving:When the RSM is connected to the radio’s bottom accessory connector, the radio’s speaker is muted, and the audio is only heard from the RSM speaker. Similarly, when a secondary receiver audio accessory is plugged into the 3.5 mm audio jack, audio to the RSM is rerouted to the secondary accessory.Transmitting:Connecting the remote speaker/microphone to the radio does not disable the radio’s microphone and PTT button.
Optional Accessories67This information provided in this section supersedes the general safety information contained in user guides published prior to February 2002Compliance with RF Energy Exposure StandardsNOTICE: This radio is intended for use in occupational/ controlled appli-cations where users have been aware of the potential for exposure and can exercise control over their exposure. This radio device is NOT authorized for general population, consumer or similar use.Federal Communication Commission RegulationsThe FCC has established limits for safe exposure to radio frequency (RF) emissions from portable two-way radios. The FCC requires manufacturers to demonstrate compliance with RF exposure limits before portable two-way radios can ne marketed in the U.S. When two-way radios are approved for occupational/controlled environment exposure limits, the FCC requires users to be fully aware of, and exercise control over, their exposure. Awareness and control of RF exposure can be accomplished by education or training through appropriate means such as information and instructions in user manuals or safety booklets. This user safety section includes useful information about RF exposure and helpful instructions on how to control your RF exposure.Your Motorola two-way radio is designed and tested to comply with a num-ber of national and international standards and guidelines (listed below) regarding human exposure to RF electromagnetic energy. This radio com-plies with IEEE (FCC) and ICNIRP exposure limits for occupational/ controlled RF exposure environments at usage factors of up to 50% talk- 50% listen. In terms of measuring RF energy for compliance with FCC exposure guidelines, your radio radiates measurable RF energy Product Safety and RF Exposure for Portable Radios Before using this radio, read this section which contains important operating instructions for safe usage and RF energy awareness and control information for compliance with RF energy exposure limits in applicable national and international standards.!C a u t i o n
68only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode.Your Motorola two-way radio complies with the follow-ing RF energy exposure standards and guidelines:• United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J• American National Standards Institute (ANSI)/ Institute of Electrical and Electronic Engineering (IEEE) C95. 1-1992• Institute of Electrical and Electronic Engineering (IEEE) C95. 1-1999 Edition• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999• Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard, 2001• ANATEL, Brasil Regulatory, Resolution 256 (April 11, 2001) “additional requirements for SMR, cellular and PCS product.”Compliance and Control Guidelines and Operating Instructions for Portable Two-Way Radios To control your exposure and ensure compliance with the occupational/ controlled environment exposure limits, always adhere to the following procedures:• Transmit no more than 50% of the time. To transmit (talk), push the Push-to-Talk button. To receive calls, release the PTT button. Transmitting 50% of the time or less is important since the radio generates measurable RF energy exposure only when transmitting (in terms of measuring standards compliance). • Hold the radio in a vertical position in front of the face with the microphone (and other parts of the radio including the antenna) at least one to two inches (2.5 to 5 centimeters) away from the lips. Keeping the radio at a proper distance is important since RF exposures decrease with distance of antenna.• For body-worn operation, always place the radio in a Motorola-approved clip, holder, case, or body harness for this product. Using non-Motorola-approved accessories may result in exposure levels which exceed the FCC’s occupational/controlled
Optional Accessories69RF exposure limits.• If you are not using a body-worn accessory and not using the radio in the intended use position in front of the face, ensure the antenna and the radio are kept one inch(2.5 centimeters) from the body when transmitting. Keeping the radio at a proper distance is important since RF exposures decreases with distance from the antenna.• Use only Motorola-approved supplied or replacement antennas, batteries, and accessories. Use of non-Motorola approved antennas, batteries, and accessories may exceed FCC RF exposure guidelines. For a list of Motorola approved antennas, batteries, and other accessories see the “Optional Accessories” Section in this manual, and also visit the following web site which lists approved accessories: http:// www. motorola.com/cgiss/index.shtmlFor additional information on exposure requirements or other training information, visit http://www. motorola.com/rfhealth.Electromagnetic Interference/Compatibility• NOTE:Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. FacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew.Medical DevicesPacemakersThe Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless radio product and a pacemaker. These recommendations are consistent with those of the U.S. Food and Drug Administration.
70Persons with pacemakers should:• ALWAYS keep the radio product more than 6 inches (15 cm) from their pacemaker when the radio product is turned ON. • Not carry the radio product in a breast pocket. • Use the ear opposite the pacemaker to minimize the potential for interference. • Turn the radio product OFF immediately if you have any reason to suspect that interference is taking place. Hearing AidsSome digital wireless radio products may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.Driver SafetyCheck the laws and regulations on the use of radios in the area where you drive. Always obey them.When using your radio while driving, please• Give full attention to driving and to the road• Use hands-free operation, if available.• Pull off the road and park before making or answering a call if driving conditions so require.
Optional Accessories71 OPERATIONAL WARNINGSFor Vehicles With an Air BagDo not mount or place a mobile radio in the area over an air bag or in the air deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle..Potentially Explosive AtmospheresTurn off your radio prior to entering any area with potentially explosive atmosphere, unless it is a portable radio type especially qualified for use in such areas as “Intrinsically Safe” for example Factory Mutual. CSA, UL, or CENELEC). Do not remove, install, or charge batteries ins such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.The areas with potentially explosive atmosphere referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often, but not always, posted. Blasting Caps and Blasting AreasTo avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signs and instructions. !W A R N I N G!
72Operational CautionsAntennasDo not use any portable radio product that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result.BatteriesAll batteries can cause property damage and/or bodily injury, such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.!C a u t i o n
Intrinsically Safe Radio Information73Intrinsically Safe RadioInformationFMRC Approved EquipmentAnyone intending to use a radio in a location where hazardous concentrations of flammable material exist (hazardous atmosphere) is advised to become familiar with the subject of intrinsic safety and with the National Electric Code NFPA 70 (National Fire Protection Association) Article 500 (hazardous [classified] locations).An Approval Guide, issued by Factory Mutual Research Corporation (FMRC), lists manufacturers and the products approved by FMRC for use in such locations. FMRC has also issued a voluntary approval standard for repair service (“Class Number 3605”).FMRC Approval labels are attached to the radio to identify the unit as being FMRC Approved for specified hazardous atmospheres. This label specifies the hazardous Class/Division/Group along with the part number of the battery that must be used. Depending on the design of the portable unit, this FM label can be found on the back or the bottom of the radio housing.The Approval mark is shown below.FMAPPROVED
74Radios must ship from the Motorola manufacturing facility with the hazardous atmosphere capability and FM Approval labeling. Radios will not be “upgraded” to this capability and labeled in the field. A modification changes the unit’s hardware from its original design configuration. Modifications can only be done by the original product manufacturer at one of its FMRC audited manufacturing facilities.• Do not operate radio communications equipment in a hazardous atmosphere unless it is a type especially qualified (e.g. FM Approved) for such use. An explosion or fire may result.• Do not operate the FMRC Approved Product in a hazardous atmosphere if it has been physically damaged (e.g. cracked housing). An explosion or fire may result.• Do not replace or charge batteries in a hazardous atmosphere. Contact sparking may occur while installing or removing batteries and cause an explosion or fire.• Do not replace or charge accessories in a hazardous atmosphere. Contact sparking may occur while installing or removing accessories and cause an explosion or fire.• Do not disassemble an FMRC Approved Product in any way that exposes the internal circuits of the unit.!W A R N I N G!
Intrinsically Safe Radio Information75Repair of FMRC Approved ProductsREPAIRS FOR MOTOROLA FMRC APPROVED PRODUCTS ARE THE RESPONSIBILITY OF THE USER.You should not repair or relabel any Motorola-manufactured communication equipment bearing the FMRC Approval label (“FMRC Approved Product”) unless you are familiar with the current FMRC Approval standard for repairs and service ("Class Number 3605”)You may want to consider using a repair facility that operates under 3605 repair service approval. FMRC’s Approval Standard Class Number 3605 is subject to change at any time without notice to you. You may want to obtain a current copy of 3605 from FMRC. Per the December, 1994 publication of 3605, some key definitions and service requirements are as follows:• Failure to use an FMRC Approved Product unit with an FMRC Approved battery or FMRC Approved accessories specifically approved for that product may result in the dangerously unsafe condition of an unapproved radio combination being used in a hazardous location.• Unauthorized or incorrect modification of an FMRC Approved Product unit will negate the Approval rating of the product.!W A R N I N G!•Incorrect repair or relabeling of any FMRC Approved Product could adversely affect the Approval rating of the unit.• Use of a radio that is not intrinsically safe in a hazardous atmosphere could result in serious injury or death.!W A R N I N G!
76RepairA repair constitutes something done internally to the unit that would bring it back to its original condition - Approved by FMRC. A repair should be done in an FMRC Approved repair facility.Items not considered as repairs are those in which an action is performed on a unit which does not require the outer casing of the unit to be opened in a manner which exposes the internal electrical circuits of the unit. You do not have to be an FMRC Approved Repair Facility to perform these actions.RelabelingThe repair facility shall have a method by which the replacement of FMRC Approval labels are controlled to ensure that any relabeling is limited to units that were originally shipped from the Manufacturer with an FM Approval label in place. FMRC Approval labels shall not be stocked by the repair facility. An FMRC Approval label shall be ordered from the original manufacturer as needed to repair a specific unit. Replacement labels may be obtained and applied by the repair facility provided there is satisfactory evidence that the unit being relabeled was originally an FMRC Approved unit. Verification may include, but is not limited to: a unit with a damaged Approval label, a unit with a defective housing displaying an Approval label, or a customer invoice indicating the serial number of the unit and purchase of an FMRC Approved model.Do Not Substitute Options or AccessoriesThe Motorola communications equipment certified by Factory Mutual is tested as a system and consists of the FM Approved portable, FM Approved battery, and FM Approved accessories or options, or both. This FM Approved portable and battery combination must be strictly observed. There must be no substitution of items, even if the substitute has been previously Approved with a different Motorola communications equipment unit. Approved configurations are listed in the FM Product Listing Manual that was included with your radio.
Accessory Safety Information77Accessory Safety InformationIMPORTANT: SAVE THESE ACCESSORY SAFETY INSTRUCTIONS • Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery.• Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only. • To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when you disconnect the battery charger from the power source outlet. • Do not operate any battery charger with a damaged cord or plug - replace them immediately.• Battery chargers may become warm during operation, but not hot. If it becomes hot to the touch, unplug it from the power outlet immediately and discontinue its use. • Use of a non-recommended attachment to a battery charger may result in a risk of fire, electric shock, or injury to persons.• Make sure the battery charger power cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress.• An extension cord should not be used with any battery charger unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that:❒ The pins on the plug of the extension cord are the same num-ber, size, and shape as those on the plug of the charger.❒ The extension cord is properly wired and in good electrical condition. ❒ The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet.• Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician.• Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.To reduce the risk of injury, charge only the rechargeable batteries listed in the Accessories section of this manual. Other types of batteries may burst, causing personal injury and damage.!W A R N I N G!
78• Maximum ambient temperature around the power supply or transformer of any battery charger should not exceed 40°C (104°F).• The output power from the power supply or transformer must not exceed the rating given on the Desktop Dual-Pocket Charger.• The disconnection from the line voltage is made by unplugging the power supply from the AC receptacle.• To reduce risk of electric shock, unplug any battery charger from the outlet before attempting any maintenance or cleaning.• For optimum charging performance, turn off the radio product while charging it in any battery charger.
Warranty79WarrantyLimited Warranty Motorola Communication ProductsNOTE: This Warranty applies within the fifty (50) united states and the Dis-trict of Columbia.I. What This Warranty Covers and For How Long:MOTOROLA, INC. (“MOTOROLA”) warrants the MOTOROLA manufactured iDEN Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:Rechargeable Batteries will be replaced during the applicable warranty period if:a. the battery capacity falls below 80% of rated capacity, orb. the battery develops leakage.MOTOROLA, at its options, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system iDEN Subscriber Digital Mobile and Portable Units One (1) YearProduct Accessories One (1) YearBatteries One (1) Year
80which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.II. General Provisions:This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding the Product, Repair, replacement or refund of the purchase price, at MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCL UDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. State Law Rights:SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY.This warranty gives specific legal rights, and there may be other rights which may vary from state to state.IV. How to Get Warranty Service:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA SSC: 1-800-323-9949 for warranty service location information.V. What This Warranty Does Not Cover:a. Defects or damage resulting from use of the Product in other than its normal and customary manner.b. Defects or damage from misuse, accident, water, or neglect.
Warranty81c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.d. Breakage or damage to antennas unless caused directly by defects in material workmanship.e. A Product subjected to unauthorized Product modifications, disas-semblies or repairs (including, without limitation, the addition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLA’S normal warranty inspection and testing of the Product to verify any warranty claim.f. Product which has had the serial number removed or made illegible.g. Rechargeable batteries if:(1). Any of the seals on the battery enclosure of cells are broken or show evidence of tampering.(2) The damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.h. Freight costs to the repair depot.i. A Product which, due to illegal or unauthorized alteration of the soft-ware/firmware in the Product, does not function in accordance with MOTOROLA’S published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.j. Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product.k. Normal and customary wear and tear.VI. Patent and Software Provisions:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:a. that MOTOROLA will be notified promptly in writing by such pur-chaser of any notice of such claim;b. that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; andc. Should the Product or parts become, or in MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its
82option and expense, either to procure for such purchaser the right to continue to using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to product any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.
Warranty83Limited Warranty Motorola Communication Products (International)I. What This Warranty Covers and For How Long:MOTOROLA warrants the MOTOROLA manufactured iDEN Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:Rechargeable Batteries will be replaced during the applicable warranty period if:a. the battery capacity falls below 80% of rated capacity, orb. the battery develops leakage.MOTOROLA, at its options, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.iDEN Subscriber Digital Mobile and Portable Units One (1) YearProduct Accessories One (1) Year
84II. General Provisions:This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding the Product, Repair, replacement or refund of the purchase price, at MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. How to Get Warranty Service:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service.IV. What This Warranty Does Not Cover:a. Defects or damage resulting from use of the Product in other than its normal and customary manner.b. Defects or damage from misuse, accident, water, or neglect.c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.d. Breakage or damage to antennas unless caused directly by defects in material workmanship.e. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment)
Warranty85f. Product which has had the serial number removed or made illegible.g. Rechargeable batteries if:1.Any of the seals on the battery enclosure of cells are broken or shoe evidence of tampering.2.the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.h. Freight costs to the repair depot.i. A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’S published specifications or the local type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.j. Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product.k. Normal and customary wear and tear.l. Exclusion for defects or damage arising from use of the products in connection with non-MOTOROLA equipment.V. Patent and Software Provisions:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:a. that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;b. that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; andc. Should the Product or parts become, or in MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue to using the Product or parts or to replace or modify the same so that it becomes non-
86infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product or any parts thereof. In no event shall MOTOROLA be liable for any incidental, special or consequential damages arising from any claim of patent infringement or alleged infringement.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to product any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.
Patent & Trademark Information87Patent & Trademark InformationThis product is protected under one or more of the following patents:4291475, 4365221, 4369516, 4374370, 4378603, 4390963, 4398265, 4400584, 4400585, 4434461, 4455534, 4486624, 4491972, 4523155, 4546329, 4574243, 4581602, 4581749, 4585957, 4593155, 4594657, 4602218, 4605987, 4616314, 4617520, 4628529, 4629829, 4633141, 4636593, 4636741, 4648125, 4649543, 4654655, 4680787, 4704588, 4711361, 4715063, 4717884, 4730195, 4731813, 4736277, 4737976, 4741018, 4742562, 4761621, 4764737, 4775998, 4791527, 4794489, 4797929, 4797947, 4798975, 4802236, 4803726, 4809356, 4811377, 4811404, 4817157, 4827507, 4829543, 4831647, 4843621, 4845772, 4851966, 4852090, 4860336, 4860341, 4868576, 4870686, 4872196, 4873683, 4876552, 4876656, 4876740, 4879533, 4885553, 4887050, 4890199, 4896124, 4896361, 4897873, 4903326, 4903327, 4904549, 4904992, 4905288, 4905301, 4912602, 4916262, 4918431, 4918732, 4922178, 4941203, 4942570, 4945570, 4956854, 4959851, 4963812, 4964121, 4970475, 4972355, 4972432, 4972455, 4975808, 4977589, 4977616, 4979207, 4984219, 4984290, 4989230, 4992753, 4996529, 5008925, 5010309, 5010570, 5014294, 5014346, 5017856, 5018188, 5020076, 5020091, 5020092, 5020093, 5023580, 5023866, 5023911, 5025387, 5027388, 5028083, 5028859, 5029233, 5036532, 5038253, 5040127, 5042071, 5045824, 5053924, 5055800, 5055802, 5055803, 5057762, 5058136, 5059885, 5060264, 5063340, 5065408, 5067139, 5070310, 5077757, 5077790, 5081674, 5083304, 5087004, 5093632, 5095503, 5107487, 5109400, 5111162, 5113400, 5113436, 5117073, 5117441, 5117449, 5117450, 5121047, 5121288, 5121412, 5122480, 5122722, 5124889, 5127040, 5127042, 5127100, 5128834, 5133010, 5134717, 5140286, 5140635, 5142551, 5142696, 5144533, 5146620, 5148471, 5148473, 5150075, 5150359, 5150384, 5151643, 5152006, 5152007, 5153590, 5157693, 5160898, 5162144, 5163159, 5164652, 5166596, 5166642, 5168522, 5170173, 5170485, 5170492, 5175729, 5175759, 5175874, 5182749, 5185566, 5185790, 5187640, 5187809, 5192924, 5193223, 5195106, 5195108, 5198887, 5200655, 5201069, 5203009, 5203012, 5203013, 5203021, 5204977, 5205751, 5210793, 5211581, 5212815, 5212826, 5214675, 5214774, 5216389, 5220290, 5220936, 5222078, 5222104, 5222251, 5230007, 5230093, 5233506, 5233633, 5235492, 5237257, 5237570, 5239127, 5241545, 5241548, 5241592, 5241688, 5242767, 5243355, 5247544, 5247565, 5249302, 5251331, 5255292, 5257414, 5259005, 5260170, 5260988, 5261119, 5262710, 5263052, 5263055, 5265271, 5267230, 5276588, 5276707, 5276913, 5276915, 5278832, 5278994, 5280630, 5280637, 5280644, 5285443, 5287013, 5287553, 5287555, 5287556, 5289505, 5297142, 5299232, 5301365, 5308716, 5321705, 5321737, 5321847, 5323421, 5325405, 5325429, 5327578, 5327642, 5331123, 5333153, 5336984, 5338909, 5343213, 5349588, 5351245, 5359696, 5361400, 5363071, 5365549, 5366826, 5367538, 5367558, 5371791, 5373101, 5375143, 5375258, 5379324, 5381114, 5384825, 5392000, 5392023, 5392331, 5396654, 5401927, 5402447, 5402448, 5404580, 5404582, 5406146, 5406562, 5408693, 5410275, 5410741, 5414711, 5420759,
885424689, 5428362, 5428820, 5428836, 5430416, 5432017, 5434947, 5436802, 5438684, 5442680, 5444764, 5446763, 5446766, 5448763, 5448770, 5448771, 5453997, 5457744, 5459640, 5459774, 5461643, 5463351, 5463406, 5463628, 5463646, 5463674, 5463688, 5463694, 5465409, 5465412, 5469177, 5471671, 5475752, 5477192, 5485506, 5485513, 5486843, 5487184, 5488649, 5490177, 5491739, 5493198, 5493700, 5493714, 5495206, 5495208, 5497126, 5497382, 5497383, 5499273, 5499394, 5499397, 5502437, 5504494, 5504812, 5506490, 5508709, 5509048, 5510693, 5511235, 5513078, 5513996, 5519303, 5519346, 5519506, 5519777, 5524276, 5526398, 5528666, 5530399, 5530922, 5533119, 5535258, 5535434, 5539360, 5542016, 5542103, 5542106, 5542116, 5544250, 5546275, 5546380, 5551078, 5551627, 5553137, 5553376, 5554996, 5555550, 5557743, 5559471, 5559522, 5559806, 5561436, 5561437, 5561852, 5565881, 5566224, 5568548, 5570453, 5572223, 5572224, 5574976, 5577267, 5577268, 5583520, 5584054, 5586146, 5588041, 5589796, 5590177, 5594778, 5594951, 5598129, 5598431, 5600341, 5604050, 5604468, 5604787, 5606332, 5606560, 5606730, 5613229, 5613863, 5615233, 5615259, 5615260, 5621763, 5621766, 5625316, 5625683, 5628001, 5628057, 5628089, 5629979, 5630159, 5630210, 5630213, 5630215, 5631538, 5633484, 5633786, 5634202, 5640690, 5642368, 5646576, 5649306, 5649309, 5656914, 5656917, 5657418, 5659601, 5660945, 5661433, 5664973, 5666429, 5668871, 5670912, 5673001, 5673003, 5673287, 5674326, 5675591, 5675702, 5678201, 5678221, 5678227, 5680063, 5684384, 5691947, 5692046, 5692101, 5696497, 5696821, 5699070, 5699389, 5699408, 5701130, 5701244, 5701589, 5703470, 5703539, 5703909, 5706019, 5706313, 5708445, 5710862, 5710987, 5711001, 5715520, 5715524, 5717307, 5722052, 5724004, 5726983, 5729221, 5732350, 5737327, 5737685, 5738954, 5739792, 5740525, 5742894, 5745116, 5745566, 5745848, 5747970, 5748727, 5754141, 5754455, 5754583, 5754645, 5754956, 5758271, 5760714, 5761300, 5761610, 5764100, 5764111, 5764730, 5764743, 5766794, 5771182, 5771471, 5777521, 5777856, 5784368, 5784419, 5784585, 5787128, 5787577, 5793315, 5793866, 5796822, 5797101, 5798716, 5799011, 5799256, 5801513, 5801567, 5802111, 5805992, 5807012, 5808585, 5808586, 5809020, 5809419, 5809421, 5809430, 5809433, 5809544, 5812093, 5812542, 5812590, 5814798, 5815507, 5815570, 5815804, 5815805, 5815807, 5815820, 5821820, 5822726, 5826224, 5831826, 5832080, 5832388, 5835006, 5835535, 5835785, 5838202, 5841851, 5842122, 5844943, 5846094, 5848072, 5848152, 5848356, 5848718, 5850440, 5854549, 5854785, 5854972, 5856763, 5856766, 5857148, 5857192, 5859522, 5859567, 5859890, 5861853, 5862460, 5862493, 5864799, 5865487, 5867063, 5867127, 5867140, 5867510, 5870670, 5872744, 5877633, 5878075, 5878209, 5878336, 5878353, 5880637, 5880646, 5881377, 5889737, 5889768, 5889859, 5892410, 5893036, 5894597, 5896054, 5896261, 5898933, 5900829, 5901347, 5901357, 5903825, 5903852, 5905956, 5907418, 5907615, 5909102, 5910944, 5912648, 5920549, 5920550, 5923007, 5924044, 5925835, 5925942, 5926119, 5926503, 5926751, 5930268, 5930288, 5930299, 5933330, 5936516, 5936972, 5939939, 5940452, 5940746, 5943027, 5945852, 5945964, 5946395, 5949020, 5950131, 5950139, 5953413, 5954817, 5955700, 5955999, 5956626, 5963848, 5963876, 5964858, 5966101, 5966667, 5966671, 5969545, 5974042, 5977916, 5980268,
Patent & Trademark Information895982881, 5983082, 5987012, 5988577, 5995050, 5996178, 5999115, 5999821, 5999832, 6002922, 6002937, 6005498, 6006104, 6008636, 6009168, 6009309, 6009325, 6009336, 6009552, 6011699, 6011784, 6011959, 6011961, 6012634, 6014376, 6014552, 6016312, 6016422, 6018584, 6018651, 6018671, 6020787, 6021332, 6023191, 6023615, 6025753, 6035182, 6035191, 6035522, 6038457, 6040683, 6040720, 6041241, 6043721, 6043786, 6044153, 6047066, 6047084, 6049192, 6049233, 6049532, 6049704, 6049725, D284759, D285439, D288432, D288683, D289156, D292578, D292920, D295627, D295973, D295975, D296187, D297734, D297735, D297736, D299136, D299137, D299232, D300742, D300827, D301473, D301476, D301883, D302015, D303656, D304189, D305427, D305717, D306015, D306163, D306293, D306299, D306441, D306583, D306594, D307271, D309301, D309451, D314173, D315330, D315346, D315543, D315559, D315565, D315907, D316417, D316859, D320780, D322783, D324024, D324388, D325028, D325029, D325032, D325583, D325915, D327061, D327062, D328302, D332261, D332785, D334746, D337332, D338012, D338887, D339127, D339335, D339336, D339337, D339564, D339578, D339581, D339582, D340709, D340710, D340711, D340906, D341589, D342248, D342663, D342729, D342730, D342741, D343173, D343615, D343616, D343834, D343835, D343836, D344087, D344271, D344444, D344511, D344512, D344945, D345977, D346785, D346786, D346798, D348071, D348250, D348427, D348470, D348665, D348666, D348668, D348674, D348880, D349273, D349701, D350113, D350348, D350349, D350350, D351375, D351840, D352497, D352503, D352946, D353131, D353361, D353587, D353588, D353591, D354055, D354062, D355181, D355895, D356084, D356309, D357224, D357249, D357457, D357680, D357681, D358148, D359052, D359734, D359735, D359959, D360398, D360632, D361070, D361763, D362840, D362852, D365094, D365817, D366872, D367640, D368479, D368696, D369162, D369359, D369797, D370016, D370463, D370672, D372237, D372481, D372703, D372896, D372919, D373585, D373764, D374013, D374014, D374227, D374424, D374872, D375732, D375733, D375734, D375932, D375935, D375952, D376127, D377792, D377934, D378366, D378911, D379558, D379624, D379981, D379982, D380468, D380751, D381021, D381664, D382537, D382538, D382872, D383115, D383748, D383749, D383759, D384080, D384662, D384951, D384952, D385271, D385283, D385555, D385873, D385874, D385875, D385877, D385888, D386175, D386494, D386757, D387054, D387055, D387199, D387346, D388078, D388079, D388080, D388081, D388082, D388424, D388429, D388430, D388775, D388783, D388793, D389157, D389476, D389478, D389488, D389641, D390221, D390222, D390509, D391567, D391955, D391966, D393470, D394256, D394423, D394425, D394433, D394438, D394439, D395301, D395302, D395431, D395642, D395875, D396472, D397337, D397689, D397694, D398926, D400161, D400165, D400204, D400209, D400496, D400526, D400527, D400874, D401554, D401929, D403265, D404397, D405080, D405782, D405801, D406098, D406191, D406586, D406695, D406812, D407063, D407685, D407708, D408401, D408402, D408418, D408783, D408815, D409186, D410459, D410460, D410929, D411165, D411196, D411202, D411204, D411507, D411535, D411843, D411844, D412000, D412487, D412709, D413893, D413898, D414159, D415122, D415499, D416226, D417224, D417449, D419155, D419290, D419565, D419956, D420008, D420977, D421005, D421443, D421982, D422275, D422595
90Additional patents are pending.MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ®Reg. U.S. Pat. & Tm. Off. © Copyright 2000 Motorola, Inc. All rights reserved. Manufactured under one or more of the U.S. patents listed in the User’s Guide.T9 is a trademark owned by Tegic Communications, Inc.All other product or service names mentioned in this manual are the property of their respective trademark owners.
Owner’s Information91Owner’s InformationMobile Equipment Identifier (IMEI)_____________________________Own Phone Number_____________________________Own Private Number_____________________________Date Purchased______________Dealer Telephone Number_______________________Customer Service Number_______________________
92Private Number DirectoryTalkgroup DirectoryPrivate Number Name123456789Talkgroup Number Name123456789

Navigation menu