Motorola Solutions 89FT5824 i730 User Manual i730Mot

Motorola Solutions, Inc. i730 i730Mot

Contents

users manual

MotorolaiDENDigital Multi-service Data-capable Phonei730 Phone User’s GuideTHIRD DRAFT@NNTN4760A@NNTN4760A
iContentsGetting Started ..............................................1Locating Your SIM Card....................................... 3Battery.................................................................. 3Activating Service ................................................ 6Powering On ........................................................ 6Enabling Over-the-Air Security ............................ 7Finding Your Phone Number ............................... 7Completing Setup ................................................ 8Phone Basics....................................................... 8SIM Card Security.............................................. 12Locking the Keypad ........................................... 15Accessories........................................................ 15For More Information ......................................... 15Making Calls ................................................ 17Receiving Calls .................................................. 17Call Icons ........................................................... 18Entering the Number to Call............................... 18Missed Phone Calls ........................................... 21Using Speakerphone ......................................... 21Using Mute......................................................... 22Making Emergency Phone Calls ........................22Call Alerts.................................................... 23Sending Call Alerts.............................................23Receiving Call Alerts..........................................23Using the Call Alert Queue.................................23Recent Calls ................................................ 25Storing Recent Calls to Contacts .......................25Deleting Recent Calls.........................................26Contacts ...................................................... 27Viewing Contacts ...............................................28Creating Entries .................................................29Storing Numbers Faster .....................................30Editing Entries....................................................31Deleting Entries..................................................31Checking Capacity .............................................31Creating Pauses and Waits................................31International Numbers........................................32Accessing Contacts with GSM Phones..............32Call Forwarding........................................... 33Forwarding All Calls ...........................................33Turning Off Call Forwarding ...............................33
iiForwarding Missed Calls.................................... 34Ring Tones...................................................35Using the Vibrate Feature.................................. 35Turning Ring Tones Off...................................... 35Ring and Vibrate................................................ 36Assigning Ring Tones to Contacts..................... 36Viewing Ring Tone Assignments ....................... 37Downloading More Ring Tones.......................... 37Managing Memory ............................................. 37Deleting Custom Ring Tones............................. 37Messages .....................................................39Message Notifications........................................ 39Voice Mail .......................................................... 39Text and Numeric Messages ............................. 40Net Alerts ........................................................... 41Mobile Originated Text Messaging............43Setting Up .......................................................... 43Receiving Messages.......................................... 43Reading Messages From the Message Center . 44Creating and Sending Messages....................... 44Managing Memory ............................................. 47Datebook ..................................................... 49Viewing Datebook .............................................. 49Creating Events..................................................50Editing Events ....................................................52Deleting Events ..................................................52Receiving Reminders.........................................53Making Calls From Datebook.............................53Customizing Datebook Setup.............................54Java Applications ....................................... 55Running Applications .........................................55Suspending Applications....................................55Resuming Applications.......................................55Ending Applications............................................56Downloading Applications..................................56Installing Applications.........................................56Deleting Applications..........................................56Managing Memory .............................................57Shortcuts on the Main Menu ..............................57Java Applications and GPS Enabled .................58GPS Enabled ............................................... 61IMPORTANT: Things to Keep in Mind ...............61
iiiMaking an Emergency Call................................ 62Viewing Your Approximate Location.................. 63Enhancing GPS Performance............................64Updating Satellite Almanac Data ....................... 65Setting Privacy Options...................................... 66Using GPS with Map Software........................... 67Voice Records .............................................69Creating Voice Records..................................... 69Playing Voice Records....................................... 69Labelling Voice Records .................................... 69Deleting Voice Records ..................................... 70Locking Voice Records ...................................... 70Managing Memory ............................................. 70Advanced Calling Features ........................71Call Waiting........................................................ 71Switching Between Calls.................................... 71Putting a Call on Hold ........................................ 71Calling 2 People................................................. 72Creating Pauses and Waits While Dialing ......... 72Making International Calls.................................. 73Setting One Touch PTT..................................... 73Setting Phone Cover Actions .............................74Group Calls ........................................................74Call Timers.........................................................75Using Your Phone as a Modem .........................76Making TTY Calls...............................................76Memo ........................................................... 79Shortcuts ..................................................... 81Creating a Shortcut ............................................81Using a Shortcut.................................................81Editing a Shortcut...............................................81Deleting Shortcuts..............................................82Entering Text............................................... 83Using Alpha Mode..............................................83Using Word Mode ..............................................83Special Function Keys........................................84Using Numeric Mode..........................................85Using Symbols Mode .........................................85Profiles......................................................... 87Viewing Profiles..................................................87Switching Profiles...............................................87
ivHow Changing Settings Effects Profiles ............ 87Creating Profiles ................................................ 88Editing Profiles................................................... 88Temporary Profiles............................................. 89Deleting Profiles................................................. 89Setting Call Filtering........................................... 90Customizing Your Phone............................91Setting the Volume............................................. 91Setting Your Phone to Not Ring......................... 91Temporarily Turning Off Calls............................ 91Using a Headset ................................................ 92Seeing the Display Better .................................. 92Putting Your Favorites First ............................... 93Changing the Look of Your Phone.....................94Using Settings.................................................... 94Understanding Status Messages...............99Safety and General Information...............101RF Operational Characteristics........................ 101Portable Radio Product Operation and EMEExposure.......................................................... 101Electro Magnetic Interference/Compatibility .... 104Medical Devices ...............................................104Operational Warnings ...................................... 105Operational Cautions .......................................106Accessory Safety Information .......................... 107Driving Safety Tips ................................... 109MOTOROLA LIMITED WARRANTY ......... 111Limited Warranty Motorola CommunicationProducts (International) ........................... 115Patent and Trademark Information ......... 119Index .......................................................... 121Quick Access ............................................ 127
vDECLARATION OF CONFORMITYPer FCC CFR 47 Part 2 Section 2.1077(a)Responsible Party Name: Motorola, Inc.Address: 8000 West Sunrise BoulevardPlantation, FL 33322 USAPhone Number: 1 (800) 453-0920Hereby declares that the product:Product Name: i730Model Number: H63XAN6RR4ANConforms to the following regulations:FCC Part 15, subpart B, section 15.107(a), 15.107(d)and section 15.109(a)Class B Digital DeviceNote: This equipment has been tested and foundto comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCCRules. These limits are designed to providereasonable protection against harmfulinterference in a residential installation. Thisequipment generates, uses and can radiateradio frequency energy and, if not installedandusedinaccordancewiththeinstructions, may cause harmful interferenceto radio communications. However, there isno guarantee that interference will not occurin a particular installation.If this equipment does cause harmfulinterference to radio or television reception,which can be determined by turning theequipment off and on, the user is encouragedtotrytocorrecttheinterferencebyoneormoreof the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between theequipment and receiver.•Connect the equipment into an outlet on acircuit different from that to which thereceiver is connected.•Consult the dealer or an experiencedradio/TV technician for help.
vi
1Getting StartedvolumecontrolsPush-To-Talk(PTT) buttonmicrophoneaccessory connectoraudio jackspeaker(in back) microphone
2Getting StartedTo start using your i730 phone:•Make sure your SIM card is in place.•Charge the battery.•Activate your service.•Enable over-the-air security if you are prompted to.pPower button.Navigation key — press the arrows to scrollthrough menus and lists.OSelects highlighted item; places andanswers calls.mAccesses context-sensitive menus.ASelects the option appearing above it onthe display.sPlaces phone calls.eEnds phone calls; returns to idle screen.tActs like swhen the phone cover isclosed; turns speakerphone on; used withvoice names and voice records..Acts like ewhen the phone cover isclosed; accesses recent calls.
3Locating Your SIM CardLocating Your SIM CardYour SIM (Subscriber Identity Module) card is a smallpiece of white plastic located in the SIM card holderin the back of your phone, underneath the battery.If your SIM card is not in the SIM card holder, it maybe in the box your phone came in, attached to a pieceof white plastic about the size of a credit card. If thisis the case, carefully detach your SIM card from thesurrounding plastic and insert it as described in“Inserting Your SIM Card” on page 14.If there is no SIM card in your phone or the box,contact your service provider.BatteryRemoving the Back Cover1Make sure the phone is powered off.2Slide the release button back until it releases theback cover.3Remove the back cover from the back of yourphone.SIM card
4Getting StartedInserting the Battery1With the phone powered off, remove the backcover.2Insert the top of the battery into the battery area.Press the bottom of the battery to secure it.3Replace the back cover and press it gently untilyou hear a click.Charging the BatteryYour phone comes with a battery charger.1Plug the charger into an electrical outlet.2Plug the other end of the charger into theaccessory connector.Tip: To remove the charger from the accessoryconnector: Press the buttons on the sides oftheplug.Pulltheplugstraightout.3When charging the battery for the first time, chargefor 30 minutes longer than the time shown in“Charging Times”.
5BatteryCharging TimesSee your battery and charger to determine theappropriate charging time.For best results, charge the batteries within thetemperature range of 50°F to 104°F (10°C to 40°C).Prolonged charging is not recommended.Removing the Battery1With the phone powered off, remove the backcover.2Remove the battery by pushing the battery towardthe antenna and lifting it out.Battery Use and Maintenance•The Motorola iDEN Approved Lithium Ion chargersprovide optimum performance. Other chargersmay not fully charge the iDEN Lithium Ion batteryor may yield a reduced number of lifetime chargecycles.•Extreme temperatures degrade batteryperformance. Do not store the battery wheretemperatures exceed 140°F (60°C) or fall below4°F (-20°C).•Lithium Ion batteries have a self discharge rateand without use, lose about 1% of their charge perday.•The battery capacity is degraded if the battery isstored for long periods while fully charged. If longterm storage is required, store at half capacity.Battery ChargerRapid Mid-RateSlim 2 hours 3 hoursHighPerformance 2 hours 4 hoursExtraCapacity 2.5 hours 5.5 hoursMaximumCapacity 3.5 hours 7.5 hours
6Getting StartedActivating ServiceThe first time you power on your phone, you must bein your local calling area. This activates your service.Powering OnThe first time you power your phone on, screen mayappear asking you to update your browserinformation. This means you must enable security.To power your phone on:1Open the phone cover.1Extend the antenna.2Press p.3If the Enter SIM PIN Code screen appears, enteryour SIM PIN. See “Entering the PIN” on page 12.Press Aunder Ok.Note: When you receive your phone, the SIM PINis 0000. Change your PIN to preventfraudulent use of the SIM card (see“Changing the PIN” on page 12).As your phone connects to the network, you will seea welcome message and a connecting message.When the idle screen appears, the phone is ready touse.To power your phone off:1Open the phone cover.1Press and hold p.2Push down the antenna.Ready
7Enabling Over-the-Air SecurityEnabling Over-the-Air SecurityIf you are set up to receive over-the-air programmingfrom your service provider, you must enable securitythe first time you power on your phone or within 20days of first activation of your phone:1When you power on your phone for the first time,after the idle screen appears, you will be promptedto select Ok to update your browser information.Note: If you press Aunder Later, you will beprompted to enable security each time youpower on your phone until you press Aunder Ok.2Press Aunder Ok.3You are prompted to enable security. Press Aunder Yes. A series of screens appears. If yousubscribe to your service provider’s plan, yourhome page appears.4Press eto return to the idle screen.Within 24 hours of enabling security, you will receivea Net alert containing your Private ID and Talkgrouplists for Private calls.To accept programming:1When you receive a Net alert saying NewBrowser Message - Receive Programming Info,press Oor press Aunder Goto.2You are prompted to accept changes to your lists.Press Oor press Aunder Ok.3If you are prompted again to accept changes toyour lists, press Oor press Aunder Ok.4A confirmation screen displays. Press Oor pressAunder Ok.5Press eto return to the idle screen.Finding Your Phone NumberMy Info lets you view your phone number, Private ID,and other phone information:1From the main menu, select My Info.2Scroll to see your information:•Name— Enter your name. See “Entering Text”on page 83.•Line1and Line 2 — your phone numbers forphone lines 1 and 2. Each is filled in when youreceive your first call on that line.•Private— Your Private ID is the number thatothersusetocontactyouusingPrivatecalls.Itis filled in when you receive your first Privatecall.•GroupID— the number of the Talkgroup youhave joined• Carrier IP — the IP address assigned to yourserviceprovider.Itisfilledinwhenyouregisterfor packet data services.
8Getting Started•IP1Addressand IP2 Address —theIPaddresses you use to access the Internet withyour phone•Ckt— Your circuit data number is the numberyouuseifyouwanttouseyourphonetotransfer circuit data. See “Using Your Phone asa Modem” on page 76. You receive this numberfrom your service provider.• Service Status — This information may beused by your service provider if there is aproblem with your phone’s services.Completing SetupVoice Mail and Other MessagesToreceivevoicemail,youmustsetupanaccountwith your service provider. See “Messages” on page39 for information on using voice mail.If your service provider offers mobile originated textmessaging, see “Mobile Originated Text Messaging”on page 43 for information on setting up and using it.Joining a TalkgroupYour sales representative or your service providercreates Talkgroups for you and assigns eachTalkgroup a Talkgroup number. You can choose aname for each of your Talkgroups when you createentries for them in Contacts.To receive group calls made to a Talkgroup, youmust join the Talkgroup. You can belong to only oneTalkgroup at a time. When you join a new Talkgroup,you no longer belong to your previous Talkgroup.To join a Talkgroup:1Press #. Then enter the Talkgroup number usingthe keypad. -or-Choose the Talkgroup name from Contacts or therecent calls list.2Press Aunder Join.Customizing FeaturesYou can control many features of your phone,including the size of the text on the display, the wayyouaccessmainmenuitems,andthevolumeofincoming sound, rings, and other tones. See“Customizing Your Phone” on page 91.Phone BasicsAny time your phone is powered on, the displayprovides you with information and options.The one-line display shows a shortened version ofthe full-sized display. To see more information, openthe phone cover.
9Phone BasicsThe screen shown above is the idle screen. The textthat appears on your idle screen depends on yourservice provider. The idle screen appears when yourphone is on, but not engaged in any activity.Tip: Toseeaone-lineidlescreenwhenyourphone closed is closed, press ..Text AreaThis area displays menus, messages, names, phonenumbers, and other information.Display OptionsTwo display options appear at the bottom of mostscreens. You select a display option by pressing theoption key below it.Menus and ListsYour phone’s features are arranged in menus,submenus, and lists.Toaccesstheitemsinamenuorlist,scrollusingthenavigation key at the top of your keypad. This key letsyou scroll up, down, left, or right. Holding down theappropriate part of the navigation key speeds upscrolling.In this guide, this symbol >tells you to select a menuor list item. For example, Settings > Securitymeans:1Scroll to Settings on the main menu.2Press Oto see the Settings screen.3Scroll to Security.OK KeyPressing O:•Selects the highlighted menu item or list item•Sets options•Confirms actions•Places and answer calls•Accessed the main menu from the idle screenReadystatus iconstext areamenu icondisplay options
10Getting StartedMenu KeyMany features provide context-sensitive menus thatlet you access related features and actions. This iconSappears any time a context-sensitive menu isavailable. Press mto access the menu.Main MenuAll your phone’s features can be accessed throughthe main menu. You can set the main menu toappear as a list or as large icons (see “Large MainMenu Icons” on page 93).aBrowser Browse the Web.qJava Java applications on yourphone. See “JavaApplications” on page 55.bSettingsDisplay/InfoPhone Calls2-Way RadioVolumeSecurityAdvancedCustomize your phone. Seepage 91.cVoiceRecord Record and play audiomessages. See page 69.dContactsnew contact formlist of contactsContacts menuView, store, edit contacts.See page 27.eMessagesVoice MailText MsgsNet AlertAccess messages. Seepage 39.fCall Forward Set call forwarding options.See page 33.oDatebooknew event formDatebook menuSchedule appointments.See page 49.gMemo Store a number to accesslater.Seepage79.hCall Timers Phone usage information.See page 75.iRecent Callslist of callsrecent calls menuCall Setup menuLists recent calls. Seepage 25.sShortcuts Create shortcuts to screens.See page 81.
11Phone BasicsStatus IconsStatus icons appear at the top of the display. Someappear at all times. Others appear only when yourphone is engaged in certain activities or when youhave activated certain features.jMy Info View personal phoneinformation, including phonenumber and Private ID. Seepage 7.pProfilesnew profile formlist of profilesProfiles menuGroups of setting you applytogether. See page 87.kCall Alertlist of call alertsCall Alerts menuLists call alerts. Seepage 23.lGPS Find your approximategeographical location. Seepage 61.mRing Toneslist of ring tonesRing Tones menuAssign ring tones and turnringer off. See page 35.abcdefgdBattery Strength — More bars on thebattery indicate a greater charge.opqrs Signal Strength — More bars next to theantenna indicate a stronger signal.APhone In Use — Your phone is active onaphonecall.BPrivate In Use — Your phone is active ona Private call.CTalkgroup In Use — Your phone is activeonagroupcall.12 Active Phone Line — 1 indicates phoneline 1 is ready to make calls; 2 indicatesphone line 2 is ready to make calls.GJHKILCall Forward — Your phone is set toforward calls. See “Call Forwarding” onpage 33.
12Getting StartedSIM Card SecurityYour SIM card protects your personal information.The SIM card stores all your Contacts information.Since this information is stored on your SIM card, notin your phone, you can remove the information byremoving your SIM card.Note: Except for making emergency calls, yourphone will not function without the SIM card.To prevent unauthorized use of your phone, your SIMcard is protected by a PIN that you enter each timethe phone is powered on. You can change the PIN orturn off the requirement that it be entered.Entering the PINYou may be required to enter a SIM PIN when youfirst use your phone.When you receive your phone, the SIM PIN is 0000.Change your PIN to prevent fraudulent use of theSIM card.Important: If you enter your PIN incorrectly threetimes, your SIM card is blocked. Tounblock your SIM card, you must contactyour service provider. See “Unblockingthe PIN” on page 13.1When the Enter SIM PIN Code screen appears,enter your SIM PIN. An asterisk appears for eachcharacter entered.2Press Aunder Ok.Changing the PIN1From the main menu, select Settings > Security >Change Password > SIM PIN.u M Q Ringer Off — Your phone is set not toring. See “Turning Ring Tones Off” onpage 35.wxT y Messages — You have one or moremessages. See “Messages” on page 39.DInternet — You are ready to browse theinternet.UAirplane Mode — Your phone is set toairplane mode.YZ Packet Data — You are ready to transferpacket data or are transferring packetdata. See “Using Your Phone as aModem” on page 76.N O TTY — You are ready to use your phoneto make calls using a teletypewriterdevice. See “Making TTY Calls” on page76.
13SIM Card Security2At the Enter Old SIM PIN Code screen, enter thecurrent SIM PIN.3Press Aunder Ok.4At the Enter New SIM PIN Code screen, enter thenew 4- to 8-digit SIM PIN.5Press Aunder Ok.6At the Re-enter New SIM PIN Code screen,re-enter the new SIM PIN to confirm.7Press Aunder Ok.Turning the PIN Requirement On andOffWhen the SIM PIN requirement is on, you areprompted to enter your PIN each time you turn onyour phone.Note: If a SIM PIN is required, your phone will notfunction until the SIM PIN is entered, exceptfor making emergency calls.When the PIN requirement is off, your phone can beused without entering a PIN.Important: When the SIM PIN requirement is off, thepersonal data on your SIM card is notprotected. Anyone can use your phoneand access your personal data.1From the main menu, select Settings > Security >SIM PIN.2Select On or Off.3Enter the current SIM PIN.4Press Aunder Ok.Unblocking the PINIf you enter your PIN incorrectly three times, your SIMcard is blocked. To unblock your SIM card, you mustcontact your service provider to get a PIN UnblockCode (PUK).Important: If you unsuccessfully enter the PUK codeten times, your SIM card is permanentlyblocked and must be replaced. If thishappens, all data is lost. You will get amessage to contact your service provider.Except for making emergency calls, yourphone will not function with a blocked SIMcard.To unblock the PIN:1Press **05s.2Enter the PUK code.3Press s.4Enteranew4-to8-digitSIMPIN.Presss.5Re-enter your SIM PIN. Press s.If you entered the codes properly, SIM Unlockedappears on the display.
14Getting StartedInserting and Removing Your SIM CardImportant: Do not touch the gold-colored areas ofyour SIM card.Switching SIM CardsMoving your SIM card from one phone to anothermoves all your Contacts information, but erases otherinformation. If you remove your SIM card and use itwith another phone, or use another SIM card withyour phone, the following information is erased:•The recent calls list•Call forwarding settings•Net alerts•Mobile originated text messages, drafts, and quicknotes•InformationstoredinMemo•3 most recent GPS Enabled locations•Voice records•Voice names•Datebook events•Options set using the Personalize menuInserting Your SIM Card1With your phone powered off, remove the backcover and battery. See “Removing the Battery” onpage 5.2Hold your SIM card as shown. Do not touch thegold-colored area.3Carefully slide your SIM card to into your phone.Removing Your SIM CardImportant: To avoid loss or damage, do not removeyour SIM card from your phone unlessabsolutely necessary.1With your phone powered off, remove the backcover and battery. See “Removing the Battery” onpage 5.cut cornerSIM cardholder
15Locking the Keypad2Slide your SIM card out of the SIM card holder. Donot touch the gold-colored area.Note: Protect your SIM card as you would anydelicate object. Store it carefully.Locking the KeypadLocking the phone’s keypad prevents its buttons frombeing pressed. When the keypad is locked, you canonly:•Power the phone on and off•Unlock the keypad•Respond to incoming calls, messages, and alertsImportant: Emergency calls cannot be placed whilethe keypad is locked.To lock the keypad:1From the idle screen, press m.2Press *.If you press a key while the keypad is locked,instructions for unlocking the keypad display briefly.To unlock the keypad:1From the idle screen, press m.2Press *.While the keypad is locked, you can respond toincoming calls, messages, and alerts just as you dowhen the keypad is not locked.To return to the idle screen:Press eif the phone cover is open. -or-Press .if the phone cover is closed.The keypad remains locked.AccessoriesYour phone comes with a battery,acharger,andacarry holster.To order additional accessories, log on to our Website at www.motorola.com/store/iden or contact yourMotorola Authorized Retailer.For More InformationIf you have questions about your i730 phone, contactyour sales representative or your service provider.SIM cardholder
16Getting Started
17Making CallsYour i730 phone makes two types of calls: digitalcellular phone calls and Private calls. With Privatecalls, you use your phone as a long-range, digitalwalkie-talkie.To make a phone call:1Enter the number you want to call.2To place the call:Press s.-or-Iftheidlescreenisdisplayed,pressO.-or-If you used a feature that lets you enter the numberwith the phone cover closed, press t.3To end the call:Press e.-or-Close the phone cover. -or-If you placed the call with the phone cover closed,press ..Note: To end a call by closing the phone cover,you must have this action turned on. See“Setting Phone Cover Actions” on page 74.To make a Private call:1Enter the Private ID you want to call.2Press and hold the PTT button on the side of yourphone. Begin talking after your phone emits achirping sound.3ReleasethePTTbuttontolisten.Tip: To let someone know you want to talk to himor her on a Private call, send a call alert. See“Call Alerts” on page 23.Receiving CallsWhen you receive a phone call, your phone rings,vibrates, or lights up its backlight.To answer a phone call:If the phone cover is closed, press t.-or-Open the phone cover. -or-Press s.-or-If the idle screen is displayed, press O.-or-Press Aunder Yes.-or-Press any key on the keypad.Note: To answer a call by opening the phonecover,youmusthavethisactionturnedon.See “Setting Phone Cover Actions” on page74.To send a phone call to voice mail instead ofanswering it:
18Making CallsIf the phone cover is closed, press ..-or-Press e.-or-Press Aunder No.To end a phone call:Press e.-or-Close the phone cover. -or-If the phone cover is closed, press ..When you receive a Private call, your phone emits achirping sound.To answer a Private call:1Wait for the caller to finish speaking.2Press and hold the PTT button on the side of yourphone. Begin talking after your phone emits achirping sound.3ReleasethePTTbuttontolisten.Call IconsWhen you make a phone call, call icons appear in thetext area of the phone’s display.When you miss a call, this icon appears in the textarea:Entering the Number to CallTo enter the number you want to call, you can:•Use the numbers on the keypad•Select the number from the recent calls list•Select the number from Contacts•Redial the last phone number called•Say a voice name into your phone•Use Speed Dial or Turbo Dial®•UseOneTouchPTTtomakeaPrivatecall•Select a number stored in Datebook•UseaTTYdevice—see“MakingTTYCalls”onpage 76From the KeypadTo enter the number you want to call, press thenumbers on the keypad.XPlacing a phone call.WReceiving a phone call.YPhone call is active.ZPhone call is on hold.UPhone call ended.VMissed phone call.
19Entering the Number to CallIfyoumakeamistake:•To clear a digit, press Aunder Dlete.•To clear all digits, press and hold Aunder Dlete.•To insert or delete a digit anywhere in the string ofdigits you have entered, scroll left or right.•To cancel, press e.From the Recent Calls ListThe recent calls list stores the last 20 calls you madeor received.With the Phone Cover OpenTo select a number from the recent calls list as thenumber you want to call:1From the idle screen, scroll down. -or-From the main menu, select Recent Calls.2Scroll to the name or number you want to call.With the Phone Cover Closed1Press .to display the most recent call.2To view the rest the recent call list, press thevolume keys on the side of your phone.3Display the name or number you want to call.From ContactsIf you have numbers stored in Contacts, you can usethese numbers to make calls. For information onentering numbers into Contacts, see “CreatingEntries” on page 29.1From the main menu, select Contacts.2Scroll to the name or number you want to call.Tip: To find Contacts entries faster, use the keypadto enter the first letter of the name.3Place the call now. -or-Scroll left or right to display the Contacts type forthe number you want to call.If you are making a Private call, your phone placesthe call to the Private ID stored in the Contacts entry,even if the Private ID icon is not displayed.Ifyouaremakingaphonecall:•Your phone places the call to the phone numberassigned to the Contacts type displayed.•If the Contacts type displayed is not a phonenumber, your phone places the call to the phonenumber stored in the Contacts entry.
20Making Calls•If the Contacts type displayed is not a phonenumber and you have more than one phonenumber stored in the Contacts entry, your phoneprompts you to select the phone number you wantto place the call to.Redialing the Last NumberPress and hold sto place a call to the last phonenumber you called.Using a Voice NameNote: This is an optional feature. Contact yourservice provider about its availability forpurchase.If you have created a voice name in Contacts for thenumber you want to call, say the voice name intoyourphonetoenterthenumber.Seepage28forinformation on voice names.You can use a voice name to enter a phone numberwith the phone cover open or closed.1Press and hold tuntil a prompt appears tellingyoutosaythevoicename.2Speaking into the microphone, say the voice nameassigned to the number you want to call.Your phone plays the name back to you.If you are making a Private call, press and hold thePTTbuttontoplacethecall.If you are making a phone call, the call is placedautomatically.Tip: To stop a phone call from being completed,press .if the cover is closed or press e.Using Speed Dial and Turbo Dial®Each phone number stored in Contacts is assigned aSpeed Dial number which you can use to enter thatnumber.Turbo Dial lets you place calls to the phone numbersassociated with Speed Dial numbers 1 through 9without entering the number.Speed Dial1From the idle screen, use the keypad to enter theSpeed Dial number assigned to the phone numberyouwanttocall.2Press #.Turbo DialFrom the idle screen, press and hold the SpeedDial number (1 through 9) assigned to the phonenumber you want to call.
21Missed Phone CallsUsing One Touch PTTOne Touch PTT sets your phone to call the mostrecent Private ID on the recent calls list, or to aPrivate ID you choose, every time you press the PTTbutton. See “Setting One Touch PTT” on page 73.From DatebookIf you have numbers stored as part of events inDatebook, you can use these numbers to make calls.For information on storing events in Datebook, see“Datebook” on page 49.1From the main menu, select Datebook.1Select the day of the event containing the numberyouwanttocall.2Place the call now. -or-If the day has more than one event with containingnumbers to call, select the event containing thenumber you want to call.For details, see “Making Calls From Datebook” onpage 53.Missed Phone CallsWhen the phone cover is closed, the one-line displayshowsthisiconVand the number of phone calls youhave missed.To dismiss the missed call message:Press ..To display the most recent call:Press .again.You can now call the most recent call, or view the restof the recent call list. See page 19.Using SpeakerphoneNote: This is an optional feature. Contact yourservice provider about its availability forpurchase.Turning on speakerphone makes incoming soundcome out of the phone’s speaker instead of theearpiece. Speakerphone is available whenever youare on an active phone call.With the Phone Cover OpenTo turn speakerphone on or off:Press Aunder Speaker.-or-Press t.With the Phone Cover ClosedWhen you make a call with the phone cover closed,speakerphone is always on.Opening the phone cover turns speakerphone off.
22Making CallsUsing MuteMuting calls lets you listen to incoming sound withouttransmitting sound. Mute is available whenever youareonanactivecall.To turn mute on:Press Aunder Mute.While mute is on, Unmute appears as a displayoption.To turn mute off:Press Aunder Unmute.Making Emergency Phone CallsYour phone supports emergency calling. EmergencyphonecallscanbemadeevenwhenyourSIMcardisblocked or not in your phone.Dial 911 to be connected to an emergency responsecenter. If you are on an active call, you must end itbefore calling 911.When you make an emergency call, your phone’sGPS Enabled feature can help emergency servicepersonnel find you, if you are in a location where yourphone's GPS antenna has established a clear view ofthe open sky and your local emergency responsecenter has the equipment to process locationinformation. See “GPS Enabled” on page 61, andparticularly “IMPORTANT: Things to Keep in Mind”on page 61 and “Making an Emergency Call” on page62, for more information on the limitations of thisfeature. Because of the limitations of this feature,always provide your best knowledge of your locationto the emergency response center when you make a911 call.Important: Emergency calls cannot be placed whilethe keypad is locked.Important: If you have not registered on the network,emergency calls cannot be placed whileyour SIM card is in your phone.
23Call AlertsSending a call alert lets the recipient know you wantto talk to him or her on a Private call.When you send a call alert, the recipient’s phoneemits a series of beeps and displays your name orPrivate ID.The recipient can:•Answer — begin a Private call with the sender•Queue — store the call alert to the call alert queue,which is a list of call alerts•Clear — dismiss and delete the call alertSending Call Alerts1Enter the Private ID you want to send to, as youwouldwhenmakingaPrivatecall.2Press Aunder Alert.Ready to Alert appears onthe display.3Press the PTT button until Alert Successfulappears on the display.Receiving Call AlertsWhen you receive a call alert, you must answer,queue, or clear it. You cannot receive phone calls orPrivate calls until you do.To answer a call alert:PressthePTTbuttontomakeaPrivatecalltothesender.To queue a call alert:Press Aunder Queue.To clear a call alert:Press O.-or-Press Aunder Clear.-or-If the phone cover is closed, press ..Using the Call Alert QueueWhen you queue a call alert, it remains in the callalert queue until you respond to it, or delete it.Viewing Call Alerts1From the main menu, select Call Alert.2Scroll through the list.Viewing Date and TimeTo view the date and time a call alert was received:1From the main menu, select Call Alert.2Select the call alert you want information on.
24Call AlertsResponding to Call Alerts in the QueueAfter you queue a call alert, you can respond to it bymaking a Private call to the sender or sending a callalert to the sender. This call alert is then removedfrom the queue.Making a Private Call to the Sender1From the main menu, select Call Alert.2Scroll to the call alert you want to respond to.3PressthePTTbuttontobeginthecall.Sending a Call Alert to the Sender1From the main menu, select Call Alert.2Scroll to the call alert you want to respond to.3Press Aunder Alert.Ready to Alert appears onthe display.4Press and hold the PTT button until AlertSuccessful appears on the display.Note: Answering a call alert from the recent call listdoes not remove it from the call alert queue.Deleting Call AlertsTo delete a call alert from the queue:1From the call alert queue, scroll to the call alert youwant to delete.2Press m.3Select Delete.4Press Oor press Aunder Yes to confirm.To delete all call alerts from the queue:1From the call alert queue, press m.2From the call alert menu, select Delete All.3Press Oor press Aunder Yes to confirm.Sorting Call AlertsTo sort call alerts by the order they were received:1From the main menu, select Call Alert.2Press m.3Select Sort By.4Select First on Top or Last on Top.
25Recent CallsThe recent calls list stores the numbers of the 20most recent calls you have made and received.If the number of a recent call is stored in Contacts,the name associated with the number appears on therecent calls list.An icon appears beside the name or numberindicating the Contacts type of the number used inthe call. See “Contacts” on page 27.For phone calls, an icon appears to the left of thename or number giving more information about thecall:Tip: The recent calls list also stores call alerts youhave received. They appear as Private calls.Viewing Recent CallsWith the Phone Cover Open1From the main menu, select Recent Calls.2Scroll through the list.To get more information on a recent call:From the recent calls list, select the call you wantinformation on.This displays information such as the nameassociated with the call, the number, the date, time,and duration of the call.With the Phone Cover Closed1Press .to display the most recent call.2To view the rest the recent call list, press thevolume keys on the side of your phone.3Press .to dismiss the recent calls list.Tip: Press tto call the number displayed.Storing Recent Calls toContacts1From the recent calls list, scroll to the number youwant to store.2Press Aunder Store.-or-If Store is not one of your options: Press m. SelectStore.Tip: If Store is not on this menu, the number isalready stored in Contacts.XA call you made.WA call you received.VA missed call. Missed calls appear on therecent calls list only if you have Caller ID.
26Recent Calls3To store the number as a new entry, select [NewContact].-or-To store the number in an existing entry, select theentry.4With the Contacts type field highlighted, scroll leftor right to display the Contacts type you want toassign the number.5If you want to add more information to the entry,follow the applicable instructions in “CreatingEntries” on page 29.6Press Aunder Done.Deleting Recent CallsTodeleteacall:1From the recent calls list, scroll to the call you wantto delete.2Press Aunder Dlete.-or-If Dlete is not one of your options: Press m. SelectDelete.3Press Oor press Aunder Yes to confirm.To delete all calls:1From the recent calls list, press m.2Select Delete All.3Press Oor press Aunder Yes to confirm.
27ContactsContacts stores up to 600 numbers or addresses.Each Contacts entry can store several numbers oraddresses.InformationstoredinContactsissavedonyourSIMcard. If you move your SIM card to anotherSIM-based phone, you can access information storedin Contacts from that phone.A Contacts entry contains:•A name — A name is required if your are storingmore than one number or address to the entry;otherwise, it is optional. Typically, this is the nameof the person whose contact information is storedin the entry.•Aringtone—Youcanassignaringtonetoringwhenyougetcallsfromthepersonwhosecontactinformation is stored in the entry.•A Contacts type — Each number or address storedmust be assigned a Contacts type:•A number or address — Each Contacts entry mustcontain a number or address. This may be anytype of phone number, Private ID, Talkgroupnumber, email address, or IP address.Note: You can store numbers up to 64 digits long,but every 20 digits must be separated by apause or wait. See “Creating Pauses andWaits” on page 31.AMobile phone numberBPrivate Private IDCWork1 phone numberDWork2 phone numberEHome phone numberFEmail email addressGFax phone numberHPager phone numberITalkgroup Talkgroup numberJIP IP addressKOther phone number
28Contacts•A Speed Dial number — When you store a phonenumber, it is assigned a Speed Dial number. Youcan accept the default Speed Dial number orchange it.•A voice name — If you create a voice name for anumber, you can then dial that number by sayingthe voice name into your phone. This icon appearsPto the left of the Contacts type icon if a voicename is assigned.Note: This is an optional feature. Contact yourservice provider about its availability forpurchase.Viewing ContactsTo access Contacts:From the main menu, select Contacts.-or-Ifyouareonacall:Pressm.SelectContacts.To view entries:1From the Contacts list, scroll to the entry you wantto view.2If an entry has more than one number or addressstored, <> surrounds the Contacts type icon. Scrollleft or right to view the icon for each number storedin the entry.3Press Oto view the entry.4Scroll to view the other numbers and addressesstored for the entry.Tip: To view more entries, continue scrolling.Searching for a NameTo search for a name in Contacts:1From the Contacts list, press m.2Select Search.3Enter the name you want to see. See “EnteringText” on page 83.4Press O.Your phone finds the name you entered or thenearest match.Showing Only Private IDs andTalkgroupsTo set Contacts to show only entries that containPrivate IDs and Talkgroup entries:1From the Contacts list, press m.2Select Filter.3Set this option to Show Prvt/Grp.To set Contacts to show all entries:1From the Contacts list, press m.2Select Filter.
29Creating Entries3Set this option to Show All.Creating EntriesA number or address and a Contacts type arerequired for all Contacts entries. Other information isoptional. You may enter the information in any orderby scrolling through the entry details.After you have entered the number or address,Contacts type, and any other information you want,you can press Aunder Done to save the entry toContacts.To cancel a Contacts entry at any time press, etoreturn to the idle screen.To create a Contacts entry:1To access the entry details screen:Select Contacts > [New Contact].-or-From the Contacts list, press m.ScrolltoNew.2Ifyouwanttoassignanametotheentry:Select Name.Enter the name. See “Entering Text” on page 83.When you are finished, press O.Tip: Press Aunder Brwse to select a namealready in Contacts.3Ifyouwanttoassignaringtonetothename:Select Ringer.Selecttheringtoyouwanttoassign.4To assign a Contacts type to the number oraddress being stored:Select the Contacts type field.Select the Contacts type you want to assign.5To store a number or address:Select the #field (or ID for an email address, or IPfor an IP address).Enter the number or address. For phone numbers,use the 10-digit format. For email addresses, see“Entering Text” on page 83.When you are finished, press O.6If you want assign more options to the number,select [Options]. See “Assigning Options” on page30.7If you want to add more numbers or addresses tothe entry:Scroll past the information you already entered.Enter the additional information for the entry usingstep2throughstep6.Youmustassignanametotheentry,ifyouhavenotalready.
30ContactsTip: Press Aunder Brwse to select a number oraddress from Contacts, the recent calls list, orMemo.8Press Aunder Done.Assigning Options1If you have not already, press Aunder Changewith the [Options] field highlighted2The default Speed Dial number assigned to aphone number is displayed in the Speed # field.This is always the next available Speed Diallocation.If you want to assign the phone number to adifferent Speed Dial location:With the Speed # field highlighted, press Oorpress Aunder Change.Press Aunder Dlete to delete the current SpeedDial number.Enter the new Speed Dial number using thekeypad.When you are finished, press Aunder Ok.3Ifyouwanttocreateavoicenameforaphonenumber, press O.As directed by the screen prompts, say and repeatthe name you want to assign to the number. Speakclearly into the microphone.4When you are finished, press Aunder Back.Storing Numbers FasterTo store numbers to Contacts from the recent call list,see “Storing Recent Calls to Contacts” on page 25.To store numbers to Contacts from Memo, see“Memo” on page 79.To store numbers to Contacts from the idle screen:1Use the keypad to enter the number you want tostore.2Press m.3Select Store Number.4To store the number as a new entry, select [NewContact].-or-To store the number in an existing entry, select theentry.5With the Contacts type field highlighted, scroll leftor right to display the Contacts type you want toassign the number.6Ifyouwanttoaddmoreinformationtotheentry,follow the applicable instructions in “CreatingEntries” on page 29.7Press Aunder Done.
31Editing EntriesEditing Entries1From the Contacts list, scroll to the entry you wantto edit.2Press Aunder Edit.-or-If Edit is not one of your options: Press m.SelectEdit.The entry details screen displays.3Follow the applicable instructions in “CreatingEntries” on page 29 to edit the various fields.Deleting EntriesDelete an Entry1From the Contacts list, scroll to the entry you wantto delete.2Press m.3To delete the entire entry, select Delete Contact.4Press Oor press Aunder Yes to confirm.Delete a Number or Address1From the Contacts list, scroll to the entry thatcontains the number or address you want todelete.2With the Contacts type field highlighted, scroll leftor right to display the Contacts type for the numberyou want to delete.3Press m.4Select Delete Number.5Press Oor press Aunder Yes to confirm.Checking CapacityTo see how many numbers are stored in Contacts:1From the Contacts list, press m.2Select Capacity.Creating Pauses and WaitsWhen storing a number, you can program your phoneto pause or wait between digits while dialing. A pausemakes your phone pause for 3 seconds beforedialing further. A wait makes your phone wait for yourresponse before dialing further.This feature is useful when using voice mail or otherautomated phone systems that require you to dial aphone number and then enter an access number.To program a pause:Press and hold *until the letter P appears. TheP represents a 3-second pause.
32ContactsIf you store 17035551235P1234, when you selectthis number and make a call, your phone dials thefirst 11 digits, pauses for 3 seconds, then dials thelast 4 digits.If you want a pause longer than 3 seconds, press andhold *more than once. Each P represents a3-second pause.To program a wait:Press and hold *until the letter W appears. TheW means your phone waits here before dialingfurther.If you store 17035551235W1234, when you selectthis number and make a call, your phone dials thefirst 11 digits and then waits. A message appearsasking if you want to send the rest of the digits. PressAunder Yes to dial the last 4 digits.Tip: You can create pauses and waits while dialinga number from the keypad. See “CreatingPauses and Waits While Dialing” on page 72.International NumbersNote: This feature may not be offered by yourservice provider.When storing a number that you plan to use forinternational calls, use Plus Dialing:1Press and hold 0for two seconds. A “0” appears,then changes to a “+”.Note: The network translates the “+” into theappropriate international access codeneeded to place the call.2Enter the country code, city code, or area code,and phone number.For information about making international calls, see“Making International Calls” on page 73.Accessing Contacts with GSMPhonesIf you plan to use the information stored in Contactswith an i2000, i2000plus, or any other GSM phone,you must purchase CompanionPro. Go towww.motorola.com/idenupdate or your serviceprovider’s web site for more information.You can use CompanionPro to make the Contactsinformation saved to your i730 phone’s SIM cardaccessible in this type of phone.
33Call ForwardingCall forwarding sends calls to the phone numbersyou specify. You can forward all calls to one numberor forward missed calls to different numbersdepending on the reason you missed the call.You can forward phone lines 1 and 2 independently.Forwarding All CallsWhen you set your phone to forward all calls, an iconappears in the top row of the display:To forward all calls:1From the main menu, select Call Forward > To.If you specified a forwarding number for all callsbefore, this number displays.To forward calls to this number, press O.-or-To delete this number, press and hold AunderDlete.2To enter the number you want to forward calls to:Enter the number using your keypad. -or-Press Aunder Srch. Select Contacts,RecentCalls,orMemo. Enter the number from Contacts,the recent calls list, or Memo, as you would whenmaking a call.3Press O.All your calls are now forwarded to the number youspecified.Turning Off Call ForwardingIf you don’t want all your calls forwarded, turn thefeature off:1From the main menu, select Call Forward > To.2Set this option to Off.All your calls are now sent to your phone.GPhone line 1 is active; calls to phone line 1 arebeing forwarded.HPhone line 1 is active; calls to phone line 2 arebeing forwarded.IPhone line 1 is active; calls to phone lines 1 and2 are being forwarded.JPhone line 2 is active; calls to phone line 1 arebeing forwarded.KPhone line 2 is active; calls to phone line 2 arebeing forwarded.LPhone line 2 is active; calls to phone lines 1 and2 are being forwarded.
34Call ForwardingCalls you miss are forwarded according to theoptions set for missed calls. By default, missed callsare forwarded to voice mail.Note: To receive voice mail messages, you mustfirst set up a voice mail account with yourservice provider.Forwarding Missed CallsYou can specify a forwarding number for each type ofmissed call:•IfBusy— Your phone is on a call or transferringdata.•IfNoAnswer— You do not answer on the first 4rings.• If Unreachable — Your phone is out of coverageor powered off.Note: If you want a type of missed call sent tovoice mail, the call forwarding number forthat type of missed call must be your voicemail access number.Toforwardmissedcalls:1From the main menu, select Call Forward >Forward > Detailed.2Select If Busy to specify a forwarding number forcalls received when your phone is busy.3If you specified a forwarding number for this typeof call before, this number displays.To forward calls to this number, press Oand go tostep 6. -or-To delete this number, press and hold AunderDlete.4To enter the number you want to forward this typeof call to:Enter the number using your keypad. -or-Press Aunder Srch. Select Contacts,RecentCalls,orMemo. Enter the number from Contacts,the Recent Calls list, or Memo, as you would whenmakingacall.5Press O.6Repeat step 2 through step 5 for No Answer andIf Unreachable.7When you are finished, press Aunder Back.
35Ring TonesTo set the ring tone your phone makes when youreceive phone calls, message notifications, or callalerts:1From the main menu, select Ring Tones.2Make sure VibeAll or SilentAll is set to Off.3Scroll through the list of ring tones and select theone you want to assign. Vibrate sets your phone tovibrate instead of making a sound; Silent sets yourphone to neither vibrate nor make a sound.Tip: Highlightaringtonetohearit.4Select the features you want to assign the ringtone to.Tip: A checkmark next to a feature means thecurrent ring tone has been assign to it. Toremove the assignment, select the feature.5When you are finished, press Aunder Done.To hear the ring tone you have selected:With the cover closed, press the volume controls.Using the Vibrate FeatureIf your phone includes a vibrate feature, you can setyour phone to vibrate when you receive phone calls,Private calls and group calls, messages notifications,or call alerts.Note: This is an optional feature. Contact yourservice provider about its availability forpurchase.TurningRingTonesOffYou can set your phone to make no sound when youreceive phone calls, Private calls and group calls,messages notifications, or call alerts. If your phoneincludes the vibrate feature, you can set your phoneto vibrate instead of making a sound.These icon indicate how the ringer is set.These icons may appear at the same time.uThe phone never rings.QThe phone always vibrates instead of ringing.MThe phone does not ring for phone calls.
36Ring TonesNever Ring1From the main menu, select Ring Tones >SilentAll.2Set this option to On.Always Vibrate Instead of RingingIf your phone includes a vibrate feature:1From the main menu, select Ring Tones >VibeAll.2Set this option to On.Tip: Pressing the volume controls to turn down thevolume as far as possible sets VibeAll to On.Do Not Ring for Some FeaturesTo set individual ring options for phone calls,messages notifications, or call alerts:1From the main menu, select Ring Tones.2Make sure VibeAll or SilentAll is set to Off.3Select Silent from the list of ring tones. -or-If your phone includes the vibrate feature, selectVibrate from the list of ring tones.4Select the features you want to set to make nosound.5When you are finished, press Aunder Done.Note: To set ring options for Private calls andgroup calls, see “Setting Your Phone to NotRing” on page 91.Ring and VibrateTosetayourphonetoringandvibratewhenyoureceive phone calls or call alerts:1From the main menu, select Ring Tones.2Make sure VibeAll is set to Off.3Scroll through the list of ring tones and highlighttheoneyouwanttoassign.4Press m.5Select Assign w/Vibe.6Select the features you want to set to ring andvibrate.7When you are finished, press Aunder Done.This icon Sappears on the display.Assigning Ring Tones toContactsYou can set the ring tone your phone makes whenyou receive phone calls or call alerts from someoneyouhavestoredinContacts.1From the main menu, select Ring Tones.2Make sure VibeAll or SilentAll is set to Off.
37Viewing Ring Tone Assignments3Scroll through the list of ring tones to the one youwant to assign.4Press Aunder Assign.5Select AContact.6Select the Contacts entry you want to assign thering tone to.Viewing Ring ToneAssignments1From the main menu, select Ring Tones.2Highlight any ring tone.3Press m.4Select Overview.5Scroll to view ring tones assigned to features andContact entries.Downloading More Ring TonesIf you want to use other ring tones, you can downloadthem into your phone for a fee. Go towww.motorola.com/indenupdate for a selection ofcustom ring tones and downloading instructions.Note: Ring tones purchased from this web sitemay be downloaded only once. If you deletea ring tone from your phone, you mustpurchase it again to download it again.Managing MemoryTo view the amount of memory available for customring tones:1From the main menu, select Ring Tones.2Press m.3Select Memory Usage.Deleting custom ring tones frees memory.Note: Ring tones are stored in your phone usingthe same memory space used to store voicerecords(see“VoiceRecords”onpage69),Deleting voice records frees memory spacefor ring tones.Deleting Custom Ring TonesTo delete a custom ring tone:1From the main menu, select Ring Tones.2Scrolltotheringtoneyouwanttodelete.3Press m.4Select Delete.5Press Oor press Aunder Yes to confirm.
38Ring Tones
39MessagesTo access your voice mail messages, text andnumeric messages, Net alerts, and any other types ofmessages you are able to receive, go to the messagecenter:1From the main menu, select Messages.2Select the type of message you want to access.The message center shows how many messagesyou have of each type. You can listen to, read, ordelete these messages.Message NotificationsWhen you receive a message, your phone notifiesyouwithtextonthedisplayandanotificationtoneorvibration. You can access the message or dismissthe notification.If you dismiss the notification, the message is notdeleted. It can be accessed through the messagecenter.Ifyouarenotonaphonecallwhenyoureceiveamessage, your phone sounds a notification toneevery 30 seconds until you access the message ordismiss the alert.If you are on a call when you receive a message,your phone may sound a notification tone during thecall or after you end the call, depending on how youset your notification options.Setting Notification OptionsTo control whether your phone sounds messagenotification tones while you are on phone calls:1From the main menu, select Settings > PhoneCalls > Notifications.2Select the option you want:• Receive All — Tones sound during calls for alltypes of messages.• Msg Mail Only — Tones sound during calls formail messages; tones for all other types ofmessages are held until you end calls.• Delay All — Tones for all types of messages areheld until you end calls.Tip: To set notification options during a call: Pressm. Select In Call Setup > Notifications.Voice MailNote: To receive voice mail messages, you mustfirst set up a voice mail account with yourservice provider.
40MessagesWhen you receive a voice mail message, New VoiceMail Message appears on the display.Press Aunder Call.To dismiss the message notification:If the phone cover is closed, press .or open thephone cover. -or-If the phone cover is open, press Oor press Aunder Exit, or close the phone cover.This icon yappears on the display, reminding youthat you have a new message.Sending Unanswered Calls to VoiceMailTo send a phone call to voice mail instead ofanswering it:If the phone cover is closed, press ..-or-Press e.-or-Press Aunder No.If the caller leaves a message, this icon yappearson the display, reminding you that you have a newmessage.Text and Numeric MessagesThe phone’s display refers to text and numericmessages as Text Messages.These messages can be up to 140 letters or 64 digitslong. You can store up to 20 of these messages.Each message is stamped with the date and time itwas left.If your phone is powered off when you receive amessage, your phone notifies you the next time youpower it on. If you are out of your coverage area, yourphone alerts you when you return to your coveragearea.Your phone attempts to deliver these messages forup to 7 days.Tip: While reading a text and numeric messagethat contains a phone number, you can presssto call that number.Receiving a MessageWhen you receive a text and numeric message, NewText Message appears on the display.To view the message:1Press Oor press Aunder Read.2If the message fills more than one screen, scroll toread it.
41Net Alerts3To keep the message, press Oor press AunderSave.-or-To delete the message, press Aunder Dlete.If the phone cover is closed, press .or open thephone cover.If the phone cover is open, press Aunder Exit orclose the phone cover. -or-This icon wappears on the display, reminding youthat you have a new message.Reading from the Message Center1From the message center, select Text Msgs.2Scroll to the message you want to read.3If the message fills more than one screen, scroll toread it.4To keep the message, press Oor press AunderSave.-or-To delete the message, press Aunder Dlete.Net AlertsNote: This feature may not be offered by yourservice provider.Net alerts are text and numeric messages sent from:•Your i730 phone•Your service provider’s website•Any email applicationWhen you receive a Net alert, a notification appearson the display.If you dismiss the notification, this icon wappears onthe display, reminding you that you have a newmessage.
42Messages
43Mobile Originated TextMessagingWith mobile originated text messaging, you can sendand receive short text messages to and from otheriDEN phones. Messages you receive appear on yourphone’s display and in the text message inbox. Youaccess these messages through the message center.See“Messages”onpage39.Note: This feature may not be offered by yourservice provider.Setting UpBefore you begin using mobile originated textmessaging, you may need to set up your signature,service center number, and expiration information:1From the main menu, select Messages.2Scroll to Text Inbox.3Press m.4Select Text Msg Setup.5With the Signature field highlighted, press AunderChange.Enter your signature. It may be up to 11 characterslong. See “Entering Text” on page 83. When youare finished, press Aunder Ok.6With the Srvc Cntr No field highlighted, press Aunder Change.Enter the phone number of your service center. Ifyou do not know this number, contact your serviceprovider.When you are finished, press Aunder Ok.7With the Expire After field highlighted, press Aunder Change.This is the amount of time messages you send aresaved if they cannot be delivered. After this period,they are discarded.Scroll or press Aunder Qto change field.When you are finished, press Aunder Done.8Press Aunder Back to save the information youentered.Receiving MessagesWhen you receive a message, your phone notifiesyou as it would with any other type of message. See“Message Notifications” on page 39.To view the message:Press Aunder Read.To dismiss the message notification:Press Aunder Exit.
44Mobile Originated Text MessagingReading Messages From theMessage Center1From the main menu, select Message > TextInbox.2Scroll to the message you want to read.3Press Aunder Read.4If the message fills more than one screen, scroll toread it.5To keep the message, press Aunder Save.-or-To delete the message, press Aunder Dlete.Tip: To see more choices, including replying to themessage, press m.Your text inbox holds up to 20 messages. Eachmessage can be up to 160 characters long.Creating and SendingMessages1From the main menu, select Messages > [CreateMsg].-or-Select [Create Msg] from Text Inbox, Text Outbox,or Drafts.2To address the message:Use the keypad to enter the phone number of theperson you want to send the message to. -or-Press Aunder Browse. Select Contacts,RecentCalls,orMemo. Enter the number from Contacts,the recent calls list, or Memo, as you would whenmakingacall.When you are finished, press Aunder Ok.3Enter the text of the message. See “Entering Text”on page 83. -or-To use a quick note: Press Aunder Browse.Scrollto the quick note you want. Press Aunder Select.For more information on quick notes, see “UsingQuick Notes” on page 45.If you want to add your signature: Press m. SelectAdd Signature.When you are finished, press Aunder Ok.4If you want to send the message, press AunderYes.-or-If you want to request confirmation of delivery,specify the type of message you want to send,save the message as a draft, or delete themessage without sending it, press Aunder No.5If you want to request confirmation of delivery:With the Report field highlighted, press AunderChange.SelectYes.
45Creating and Sending Messages6Ifyouwanttospecifythetypeofmessageyouwant to send:With the Send As field highlighted, press AunderChange. Scroll to the message type you want.Press Aunder Select.7To send the message: Press s.PressAunderYes.-or-To save the message as a draft without sending it:Press m.ScrolltoSave As Draft.PressAunderSelect.-or-To delete the message without sending it: Press m.Scroll to Dlete.PressAunder Select.Tip: In some fields, you can select an option byscrolling left or right instead of pressing Aunder Change.Addressing Messages From the RecentCalls List1From the recent calls list, scroll to the name youwant to send a message to.2If the entry has more than one phone numberstored, view the phone number you want to sendthe message to.3Press m.4Select Compose SMS. The message isautomatically addressed to the phone number youchose.5Follow step 3 through step 7 of “Creating andSending Messages” on page 44.Addressing Messages From the IdleScreen1Using the keypad, enter the number you want tosendamessageto.2Press m.3Select Compose SMS. The message isautomatically addressed to the phone number youchose.4Follow step 3 through step 7 of “Creating andSending Messages” on page 44.Using Quick NotesQuick notes are short, pre-written text messages thatyoucancreate,edit,andsend.Youcanstoreupto20 quick notes. A quick note may be up to 30characters long.To create a quick note:1From the main menu, select Messages > QuickNotes > [New Quick Note].2Press Aunder Create.
46Mobile Originated Text MessagingEnter text. See “Entering Text” on page 83. -or-To choose from pre-installed notes: Press Aunder Browse. Scroll to the note you want. PressAunder Select.3Press Aunder Store.Tip: For more options, including sending the quicknote, press m.Using DraftsWhenyousaveamessageasadraft,itissavedinthe drafts folder. You must have a draft saved to havea drafts folder.To edit a draft:1From the main menu, select Messages > DraftsFolder.2Press Aunder Change.3To edit the fields you want to change, follow step 2through step 7 in “Creating and SendingMessages” on page 44.If you have a draft saved, you can create more draftsin the drafts folder:1From the main menu, select Messages > DraftsFolder > [Create Msg].2Press Aunder Create.3Follow step 2 through step 6 in “Creating andSending Messages” on page 44.4Scroll to Save As Draft.Using the OutboxMessages you have sent are stored in the outbox.These icons appear next to messages in the outbox:Resending MessagesTo resend a message:1From the main menu, select Messages > TextOutbox.2Scrolltothemessageyouwanttoresend.4Sent and confirmed.9Send attempted.0Forwarded.5Received by addressee.6Not received by addressee.8Send failed.7Re-sent.RLocked.
47Managing Memory3Press m.4Select Re-send.5Press Aunder Yes to confirm.Deleting Sent MessagesTo delete a sent message:1From the main menu, select Messages > TextOutbox.2Scroll to the message you want to delete.3Press m.4Select Delete.5Press Aunder Yes to confirm.To delete all unlocked sent messages:1From the main menu, select Messages > TextOutbox.2Press m.3Select Delete All.4Press Aunder Yes to confirm.Locking Sent MessagesWhen you lock a message, it cannot be deleted untilyou unlock it.1From the main menu, select Messages > TextOutbox.2Scroll to the message you want to lock or unlock.3Press m.4Scroll to Lock to lock the message. -or-Scroll to Unlock to unlock the message.5Press Aunder Select.Managing MemoryYour text inbox, outbox, and drafts folder have a setamount of memory available for storing messages.The text inbox holds 20 messages of up to 160characters. If the text inbox is full, you cannot receivemessages until you delete some.The outbox and drafts folder share memory space.Together they can hold 20 messages. If the outboxand drafts folder memory is full, you cannot sendmessages or save drafts until you delete some.To view the amount of memory available in your textinbox:1From the main menu, select Messages > TextInbox.2Press m.3Select Memory Meter.To view the amount of memory available in youroutbox and drafts folder:1From the main menu, select Messages > TextOutbox.
48Mobile Originated Text Messaging2Press m.3Select Memory Meter.
49DatebookDatebook stores up to 250 events. You can storeevents over a 13 month period — 12 months afterand 1 month before the current date.A Datebook event may contain:•Asubject—Anameyouassigntotheevent.Youcan also enter a phone number, Private ID, orTalkgroup number here. After the event is stored,you can call this number from Datebook or whenyou get a reminder of this event.•A location — The location of the event. You canalso enter a phone number, Private ID, orTalkgroup number here. After the event is stored,you can call this number from Datebook or whenyou get a reminder of this event.•A date — The date automatically assigned to anevent is the date that was highlighted or selectedwhen you began creating the event. You canchange this date before storing the event.•A start time — The start time automaticallyassigned to an event is the beginning of the day.You can change the start time, or assign no starttime, before storing the event.•A duration — the length of time the event lasts•An option to store the event as a recurring event•A reminder — If an event has a start time, you canset Datebook to remind you that the event is goingto start.•An option to choose the ring tone that reminds youthattheeventisgoingtostart•An option to switch profiles while the event isoccurring•An option to start a Java application when theevent startsOnly the subject and date are required.Viewing DatebookTo access Datebook:From the main menu, select Datebook.You can view Datebook by the day, by the week, orby the month. You can also view the details of anyevent.In day view, brief information about each event forthat day appears.In week view, events appear as markerscorresponding to their times.In month view, days with events appear with a markerin the corner.
50DatebookTo view an event:1Select the day the event occurs.2Select the event.To change the current view:1While viewing Datebook, press m.2Select the view you want.Navigating DatebookTo scroll through Datebook:Scroll left and right using the navigation key. -or-Press *or #. In week view and month view, thisis faster.Toseemoreindayview:Scroll up and down using the navigation key.To highlight a day in month view:Enter the date using the keypad.To go to today’s date:1While viewing Datebook, press m.2Select Go to Today.To go to any date in Datebook:1While viewing Datebook, press m.2Select Go to Date.3Select the date you want.Creating EventsEvery Datebook event must have a subject and bestored to a date. Other information is optional.You may enter the information in any order byscrolling through the event details.After you have entered the information you want, youcan press Aunder Done to store the event toDatebook.If you decide you don’t want to store the event:Press Aunder Cancel.To create a Datebook event:1While viewing datebook, press Aunder New.-or-In day view, select [New Event].2To assign a subject to the event:Select Subject.Enter the name. See “Entering Text” on page 83.-or-Press Aunder Brwse to choose from commonevent names. -or-
51Creating EventsEnter a phone number, Private ID, or Talkgroupnumber. After the event is stored, you can call thisnumber.When you are finished, press O.3Ifyouwanttoassignalocationtotheevent:Select Location.Enter the location. See “Entering Text” on page 83.-or-Enter a phone number, Private ID, or Talkgroupnumber. After the event is stored, you can call thisnumber.When you are finished, press O.4The start time automatically assigned to an eventis the beginning of the day. If you want to changethe start time or assign no start time:Select Start.Enter the start time you want. -or-Press Aunder No Time to assign no start time.5Ifyouwanttoassignadurationtotheevent:Select Duration.Select the duration you want. -or-Select Custom... to enter a duration.6The date automatically assigned to an event is thedate that was highlighted or selected when youbegan creating the event. To change the date ofthe event:Select Date.Enter the date you want.7If you want to make the event a recurring event:Select Repeat.Select the repeat cycle you want.If the event occurs more than once a week: SelectMultiple Days. Select the days you want.Select Done.Select the date you want this event to stoprecurring.8If you want to create reminder for this event.Select Reminder.Select the reminder time you want. -or-Select Custom... to enter a reminder time.9If you have entered all the information you want forthis event, press Aunder Done.-or-If you want to assign a ring tone, a profile, or aJava application to the event, see “Assigning MoreOptions” on page 52.
52DatebookAssigning More OptionsTo assign more options before storing an event:1If you have created a reminder for the event andwant to set the ring tone for that reminder:Select Ring Tone.Select the ring tone you want from the ring tonesstored in your phone.2Ifyouwanttoassignaprofilethatyourphoneisswitched to while the event is occurring:Select Profiles.Select the profile you want from the profiles storedin your phone.Your phone switches to this profile when the eventstarts and switch back to the previous profile whenthe event ends.3IfyouwanttoassignaJavaapplicationtostartwhen the event starts:Select App.Select the application you want from the Javaapplication stored in your phone.If you created a reminder for this event, yourphonepromptsyoutostarttheJavaapplicationwhen you get the reminder.Editing EventsTo change the details of an event:1Highlight the day the event occurs.2Select the event.3Press Aunder Edit.4Follow the applicable instructions in “CreatingEvents”onpage50toeditthevariousfields.To copy an event to another date:1Highlight the day the event occurs.2Select the event.3Press m.4Select Copy.5Press Aunder Yes to confirm.6Enter the date you want.7If you want to change more information, follow theapplicable instructions in “Creating Events” onpage50toeditthevariousfields.Deleting Events1Selectthedaytheeventoccurs.2Select the event.3Press m.4Select Delete.5If the event is a recurring event:
53Receiving RemindersSelect This Event Only to delete only the eventselected in step 2.Select Repeat Event to delete all occurrences ofthe event.Press Oor press Aunder Yes to confirm.Receiving RemindersIf you created a reminder for a Datebook event, whenthe reminder time occurs, your phone notifies youwith text on the display and a reminder tone.To view more details about the event:Open the phone cover. -or-Press Aunder View.To dismiss the reminder:If the phone cover is closed, press .or open thephone cover. -or-If the phone cover is open, press Opress AunderDismiss, or close the phone cover.Tip: You can set your phone to power on when youreceive a reminder. See “CustomizingDatebook Setup” on page 54.For Events with Java ApplicationsIf you assigned a Java application to start when theevent starts, you can start the application when youget the reminder.1Press m.2Select Launch.For Events with Numbers to CallIf you stored a phone number, Private ID, orTalkgroup number in the Subject or Location field ofa Datebook event, you can call or send a call alert tothat number from the reminder for that event. Seestep 3 on page 54.Making Calls From DatebookIf you stored a phone number, Private ID, orTalkgroup number in the Subject or Location field ofa Datebook event, you can call or send a call alert tothat number from Datebook.If you have the same type of number stored inSubject and Location, the number in Subject iscalled or sent a call alert.To make a call or send a call alert:1Select the day of the event containing the numberyouwanttocallorsendacallalertto.
54Datebook2Gotostep3toplacethecallorsendthecallalertnow. -or-If the day has more than one event containingnumbers to call, select the event containing thenumber you want to call or send a call alert to.3To make a phone call:Press s.-or-Press m. Select Call # in Event.To make a Private call or group call:Press and hold the PTT button on the side of yourphone. -or-If you did not include a #before the Talkgroup youwant to call: Press m. Select Talkgroup.Tosendacallalert:Press m. Select Alert # in Event.Customizing Datebook SetupTo access Datebook set up options:1From the main menu, select Datebook.2Press m.3Select Setup.You can view or change these options:•StartView— sets Datebook to start in day view,month, week view, or month view when you accessDatebook.• Day Window — sets Datebook to show a 12-hourday or a 24-hour day in week view.•DailyBegin— sets the beginning of your day.This is the earliest time of day displayed in weekview, if you have a 12-hour day view.•Reminders— Setting this option to Always setsyour phone to power itself on when you receivereminders. To avoid draining the battery, yourphone powers itself off after a short time.• Delete After — sets the amount of time Datebookwaitstodeleteaneventafterisoccurs.•TimeShift— lets you shift the times of allDatebook events. This is useful if you are travellingto a different time zone.• Alert Timeout — sets the amount of time a tonecontinues to sound when you receive a messagenotification, call alert, or Datebook reminder.•Clock— controls whether the time and dateappear on the idle screen; sets time and dateformat; sets year.
55Java ApplicationsYour phone arrives with Java applications installedand ready to run. You can download and install moreJava applications.YoucanmakeaJavaapplicationeasytorunbycreating a shortcut to it on the main menu.Note: Using Java applications may cause yourphone to use up more battery power thanother uses of your phone.Running ApplicationsTo run an application that has a shortcut on the mainmenu:1Fromthemainmenu,selecttheapplicationorsuiteofapplicationsyouwanttorun.2If you have selected a suite of applications: PressOor press Aunder Open. Select the applicationyouwanttorun.3Press O.To run an application that does not have a shortcuton the main menu:1From the main menu, select Java.2Select the application or suite of applications youwant to run.3If you have selected a suite of applications: PressOor press Aunder Open. Select the applicationyou want to run.4Press O.Suspending ApplicationsWhen you suspend an application, it does not stoprunning. It goes to the background so that you canrun another application in the foreground.Tosuspendanapplication:Press eor close the phone cover.To view your suspended applications:From the Java menu, select Suspended Apps.You can have up to 3 applications running at onetime—1runningintheforegroundand2inthebackground.Resuming ApplicationsYou can resume a suspended application at anytime. This brings it to the foreground.1From the Java menu, select Suspended Apps.2Select the application you want to resume.3Press O.
56Java ApplicationsEnding ApplicationsTo end an application:1From the main menu, select Java.2Scroll to the application you want to end.3Press Aunder End.To end all applications:1From the main menu, select Java.2Press m.3Select End All.4If you want to end all applications without lettingthem exit, press Aunder EndNow.Tip: You can also end applications from theSuspended Apps screen.Downloading ApplicationsIf you want to run more Java applications, you candownload them into your phone. Go towww.motorola.com/indenupdate for a selection ofJava applications and downloading instructions.Installing ApplicationsBefore running most application you havedownloaded, you must install them.1From the main menu, select Java.2Select the application or suite of applications youwant to install.3Press O.4IfyouwanttocreateashortcuttotheJavaapplication on the main menu: Press AunderNext.PressAunder Yes.PressAunder Add.Deleting ApplicationsTo delete an application:1From the main menu, select Java.2Select the application you want to delete.3Press m.4Select Deinstall.5Press Oor press Aunder Yes to confirm.6When your phone has finished deleting theapplication, press Aunder Finish.To delete all Java applications:1From the main menu, select Java.2Select the application you want to delete.3Press m.4Select Delete All.5Press Oor press Aunder Yes to confirm.6When your phone has finished deleting theapplication, press Aunder Finish.
57Managing MemoryManaging MemoryTo view the amount of memory available for Javaapplications:1From the main menu, select Java.2Select Java System.3Press Aunder Next.4To see more memory information, press AunderNext again.Deleting Java applications frees memory.Note: Java application data is stored in your phoneusingthesamememoryspaceusedtostorevoice records (see “Voice Records” on page69), ring tones (see ““Ring Tones” on page35), and wallpaper images (see “Wallpaper”on page 94). Deleting some of these otheritems frees memory space for Javaapplications.Shortcuts on the Main MenuWhen you install an application, you can create ashortcut to the application on the main menu.Tocreateashortcuttoanapplicationthatisalreadyinstalled:1From the main menu, select Settings >Personalize > Menu Options > Add/RemoveApps.-or-From the main menu: Press m. SelectAdd/Remove Apps.2Scroll to view the list of Java applications. Anyapplication that has a shortcut on the main menuhasacheckmarknexttoit.3Scroll to the application you want to create ashortcut for.4Press Aunder Add.To remove a shortcut:1From the main menu, select Settings >Personalize > Menu Options >Add/RemoveApps.-or-From the main menu: Press m. SelectAdd/Remove Apps.1Scroll to view the list of Java applications. Anyapplication that has a shortcut on the main menuhasacheckmarknexttoit.2Scroll to the application you want to remove theshortcut for.3Press Aunder Remove.
58Java ApplicationsJava Applications and GPSEnabledSome Java applications can make use of yourphone’s GPS feature to determine the approximategeographical location of your phone. (See “GPSEnabled” on page 61 for more information on theGPS feature.) However, for privacy reasons, you maynot always want Java applications to access thelocation of your phone. Your phone protects yourprivacybygivingyoutheoptiontoblockallorsomeJava applications from accessing the location of yourphone.Setting Privacy for All JavaApplicationsThese options control the privacy of all Javaapplications on your phone:• Restricted — No Java or similar softwareapplications may access the location of yourphone. However, location information may still beavailable to the phone’s owner, fleet manager, oraccount administrator.• Unrestricted — All Java applications may accessthe location of your phone, without notifying you.•ByPermission—WhenaJavaapplicationattempts to access the location of your phone, youarepromptedtogivepermission.However,location information may still be available to thephone’s owner, fleet manager, or accountadministrator.See “Setting Privacy Options” on page 66 forinformation on choosing these options.Granting or Denying PermissionIf you choose By Permission, you must grant ordeny each Java application access to the location ofyour phone when the application requests access forthefirsttime.Youmayberequiredtograntordenysubsequent requests from the same application,depending on the privacy setting you choose for theindividual Java application (see “Setting Privacy forEach Java Application” on page 59).When a Java application requests access thelocation of your phone, a screen appears informingyou.To deny this request:1Press Aunder Deny. The application does notaccess the location of your phone.2Select the denying option you want:
59Java Applications and GPS Enabled•Always— If the application requests access tothe location of your phone again, the request isdenied without notifying you.• For this session — If the application requestsaccess to the location of your phone againbefore you power off your phone, the request isdenied without notifying you.• Only Once — If the application requests accessto the location of your phone again, you areprompted to grant or deny permission.To grant this request:1Press Aunder Grant. The application accessesyour phone’s location.2Select the granting option you want:•Always— If the application requests access tothe location of your phone again, the request isgranted without notifying you.• For this session — If the application requestsaccess to the location of your phone againbefore you power off your phone, the request isgranted without notifying you.• Only Once — If the application requests accessto the location of your phone again, you areprompted to grant or deny permission.Setting Privacy for Each JavaApplicationAfter a given Java application requests access to thelocation of your phone for the first time, you have theopportunity to set GPS privacy option for that Javaapplication.1From the main menu, select Java.2Select the application or suite of applications youwant to set the privacy option for.If the application has requested access to thelocation of your phone, mappears when youhighlight the application.3Press m.4Select Privacy Settings.5Select the privacy option you want for thisapplication:•Always— The application always haspermission to access the location of your phone,without notifying you.•Ask— When the application requests access tothe location of your phone, you are prompted togrant or deny permission (see “Granting orDenying Permission” on page 58).• Never — When the application requests accessto the location of your phone, the request isdenied without notifying you.
60Java Applications
61GPS EnabledYour phone’s GPS Enabled feature uses informationfrom Global Positioning System (GPS) satellitesorbiting the Earth to determine the approximategeographical location of your phone, expressed aslatitude and longitude. The availability and accuracyof this location information (and the amount of timethat it takes to calculate it) will vary depending on theenvironment in which you are using the GPS feature.For example, GPS location fixes are often difficult toobtain indoors, in covered locations, between highbuildings, or in other situations where you have notestablished a clear broad view of the sky. SEE:“IMPORTANT: Things to Keep in Mind” on page61.When you make a 911 emergency call, the GPSfeature of your phone can help emergency personnellocate you if your phone has adequate access toGPS satellite signals and your emergency responsecenter is equipped to process such information.You can also use the GPS feature to view yourapproximate location. Location information appearson the phone’s display.Java applications loaded on your phone can alsorequest your location. If your phone is connected to alaptop computer or similar device, software runningon that device can request your location. To protectyour privacy, you can control whether these requestsare granted.IMPORTANT: Things to Keep inMindIf you are using the GPS feature of your phone whiledriving, please give full attention to driving and to theroad.Where adequate signals from multiple satellitesare not available (usually because your GPSantenna cannot establish a view of a wide area ofopen sky), the GPS feature of your phone WILLNOT WORK. Such situations include but are notlimited to:• In underground locations• Inside of buildings, trains, or other coveredvehicles• Under any other metal or concrete roof orstructure• Between tall buildings or under densetree-cover• Near a powerful radio or television tower
62GPS Enabled• When your GPS antenna is covered (forexample, by your hand or other object) orfacing the ground• In temperature extremes outside the operatinglimits of your phoneWalking or driving very slowly may alsosubstantially reduce GPS performance.Even where location information can becalculated in such situations, it may take muchlonger to do so, and your location estimate maynot be as accurate. Therefore, in any 911 call,always report the location to the emergencyresponse center if you can and if you cannot,remain on your phone for as long as theemergency response center instructs you.Even where adequate signals from multiplesatellites are available, your GPS feature will onlyprovide an approximate location, often within 150feet (45 meters) but sometimes much further fromyour actual location. Advice on how to improveGPS performance is provided in “Enhancing GPSPerformance” on page 64.While the GPS feature of your phone can be avaluable navigational aid, it does not replace theneed for careful navigating and good judgment.Never rely solely on one device for navigation.Remember that the accuracy of the locationinformationandthetimeneededtoobtainitwillvarydepending on circumstances, particularly the abilityto receive signals from adequate numbers ofsatellites.On emergency calls, your phone uses assistanceinformation from the phone network to improve thespeed and accuracy of your phone’s locationcalculation: if such assistance information becomesunavailable, it may reduce the speed and accuracy ofthe location calculation.The satellites used by the GPS feature of your phoneare controlled by the U.S. government and aresubject to changes implemented in accordance withthe Department of Defense GPS user policy and theFederal Radionavigation Plan. These changes mayaffect the performance of the GPS feature of yourphone.Making an Emergency CallDial 911 to be connected to an emergency responsecenter. If you are on an active call, you must end itbefore calling 911.When you make an emergency 911 call, the GPSfeature of your phone begins to seek information tocalculate your approximate location. It will take theGPS feature of your phone some time todetermine your approximate location. Even whereyour phone has good access to sufficient GPS
63Viewing Your Approximate Locationsatellite signals and network assist data, it may take30 seconds or more to determine the approximatelocation. This time will increase where there isreduced access to satellite signals. When yourapproximate location is determined, it is madeavailable to the appropriate emergency responsecenter.In some cases, your local 911 emergencyresponse center may not be equipped to receiveGPS location information. For this reason, andbecause the GPS location information reported isonly approximate or may not be available in yourlocation (see “IMPORTANT: Things to Keep in Mind”on page 61), always report your location to the911 operator you speak to when making anemergency call, if able, just as you would when usinga phone without GPS capabilities.Note: If you are concerned about whether yourlocal 911 emergency response center isequipped to receive GPS locationinformation, contact your local authorities.In general, if your phone has access to signals frommore GPS satellites, your location will be determinedfaster and more accurately than if your phone hasaccess to signals from fewer GPS satellites.If your phone does not have adequate access to GPSsatellites signals, the location of the nearest celltower in contact with your phone is automaticallymade available to the emergency response center, ifthe center has the capability to receive suchinformation.See “Enhancing GPS Performance” on page 64 forinformation on how to help your phone determineyour location.Viewing Your ApproximateLocation1From the main menu, select GPS > Position.2Scroll to view the entire screen.This displays the following information about the lasttime your location was calculated:•Thetime(asGreenwichMeanTime)anddatethatthe location was last calculated•The approximate location, expressed as latitudeand longitude•The estimated accuracy of the calculated location.This estimate of accuracy is only a very roughestimate and may vary substantially from theactual accuracy of the approximate locationinformation reported.
64GPS Enabled•The number of satellites used to calculate thelocation. In general, more satellites make for betteraccuracy.To calculate your location again:Press Aunder Rfrsh.It may take your phone several minutes to completethe process of determining your location. During thistime, a message usually appears on your phone’sdisplay saying your phone is scanning for satellites.For tips on getting the best location calculation, see“Enhancing GPS Performance” on page 64.The Position screen displays the updatedinformation.To cancel a location calculation before it iscompleted:Press Aunder Cancel to return to the Positionscreen. -or-Press eto return to the idle screen.Each time approximate location of your phone iscalculated, the latest location information is stored inyour phone and remains there even when your phoneis powered off. You will see this information the nexttime you view the Position screen.If you received a phone call or alert while attemptingto determine your location, the Position screen willdisappear, but your phone will continue attempting todetermine its location. If it is successful, the newlocation information will be displayed the next timeyou view the Position screen.Enhancing GPS PerformanceSometimes the GPS feature of your phone may beunable to complete a location calculationsuccessfully. If this happens when you are making anemergency call, the location of the nearest cell towerin contact with your phone is made available to theappropriate emergency response center if the centerhas the capability to receive such information. If thishappens when you are trying to view your location onthe phone’s display, you will see a messageindicating that your phone cannot access satellites.To improve accuracy and increase your chances of asuccessful calculation, do the following while yourphone is determining your approximate location:•Stay in the open. The GPS feature works bestwhere there is nothing between your phone and alarge amount of open sky. If possible, go outside,away from tall buildings and foliage. Whileperformanceinabuildingisimprovedbymovingcloser to windows, glass with certain sun shieldingfilms may block satellite signals.
65Updating Satellite Almanac Data•Hold your phone to enhance reception. Signalsfrom GPS satellites are transmitted to your GPSantenna, which is inside the back of your phone,opposite the earpiece. Hold your phone away fromyour body, giving the antenna clear access tosatellite signals. Do not cover the antenna areawith your fingers or anything else.•Stand still. If possible, stand still until your phone isfinished determining your location. Moving yourphone at a walking pace while your phone iscalculating your approximate location maysubstantially decrease GPS performance.•Inacar.WhenusingtheGPSEnabledfeatureinacar, position your phone so that the GPS antennahas good access to GPS signals through the car’swindows. Typically, the GPS antenna has bestaccess to GPS signals in a car when placed near awindow.Note: Although moving your phone at a walkingpace decreases GPS performance, movingit at the speed of a moving car does not.•Stay in network coverage. Depending on who yourservice provider is, the network will provide yourphone with information that helps determine yourlocation more quickly and accurately.Updating Satellite AlmanacDataAnother way to keep the GPS feature of your phoneworking well is to keep your satellite almanac data upto date.The United States government maintains an almanacof data about where GPS satellites are as they orbitthe Earth. This information is available to your phone.Keeping your satellite almanac up to date helps yourphone determine your location more quickly.GPS antenna area
66GPS EnabledThe almanac contains information about the locationof satellites, their operational status, and othersatellite information. Keeping this informationupdated enhances the performance of your GPSfeature. In most cases, your phone will be able to geta fix in strong satellite signal conditions with outdatedalmanac data, but it may take longer.Note: Whenyoumakeanemergencycall,yourphone does not rely upon the almanac todetermine your location.If your satellite almanac data is out of date, yourphone may prompt you to update it. Follow theinstructions that appear on the phone’s display. Youmaybeaskedtogotoawebsiteorcallacustomercare number.Setting Privacy OptionsYour phone’s GPS privacy options control whetherJava applications on your phone or other softwareapplications may view the location of your phone.Youmay set your phone to one of these GPS privacyoptions.Note: Privacy options do not apply to thetransmission of location information duringemergency 911 calls.To set your GPS privacy options:1From the main menu, select GPS > Privacy.2If your GPS PIN security feature is enabled, enteryour GPS PIN. (See “Setting the GPS PIN SecurityFeature” on page 66 for more information.)3Select the privacy option you want:• Restricted — No Java or similar softwareapplications may view the location of yourphone. However, location information may stillbe available to the phone’s owner, fleetmanager, or account administrator.• Unrestricted — All applications may view thelocation of your phone, without notifying you.•ByPermission— When an applicationattempts to view the location of your phone, youwill be prompted to give permission. However,location information may still be available to thephone’s owner, fleet manager, or accountadministrator.Setting the GPS PIN Security FeatureTo prevent your GPS privacy settings from beingaltered without your knowledge, your GPS privacyoption can be protected by a PIN.When you receive your phone, the GPS securityfeature is turned off, so you do not have to enter aGPS PIN to access your GPS privacy options. If youturn this feature on, you will be required to enter aGPS PIN to access your GPS privacy options.
67Using GPS with Map SoftwareTo turn the GPS Enabled security feature on or off:1From the main menu, select Settings > Security >GPS PIN.2Select On or Off.3Enter the current GPS PIN.Note: When you receive your phone, your GPSPIN is 0000.4Press Aunder Ok.To change your GPS PIN:1From the main menu, select Settings > Security >Change Password > GPS PIN.2Enter the current GPS PIN.Note: When you receive your phone, your GPSPIN is 0000.3Press Aunder Ok.4Enterthenew4-to8-digitGPSPIN.5Press Aunder Ok.6Enterthenew4-to8-digitGPSPINtoconfirm.7Press Aunder Ok.Using GPS with Map SoftwareYou can use the GPS feature of your phone toprovide approximate location data to a laptopcomputer or similar device that is running interactivemap software such as that made by DeLorme orMicrosoft. This way, if your phone has good access toGPS signals, your approximate position on a mapcanbemadeavailableasyoutravelinavehicle.To do this, connect your phone to your laptop (orother device) with a data cable and set your phone totransmit data (see “Getting Started” on page 68).Your phone then provides your approximate locationto the device running the map software, whichdisplays your location on a map. Your phoneprovides an updated location every second and themap software displays your changing location on itsmap.See “Enhancing GPS Performance” on page 64 formore details on obtaining good location information.Note: Because your phone is continuouslydetermining your location, using the GPSfeature of your phone with map softwareuses the phone’s battery power quickly.
68GPS EnabledSoftware CompatibilityYour phone sends location information to your laptopor other device using the standard National MarineElectronics Association (NMEA) format. Your phonesupports output messages in NMEA-0183 format andsupports the following NMEA-0183 sentences: GGA,GLL, GSA, GSV, RMC, and VTG.The map software running on your laptop or otherdevice must support NMEA 3.0.Getting StartedTo connect your phone to your laptop or other device:1With the phone’s display facing up, insert the datacable’s connector into the accessory connector,until you hear a click.2InsertthedataplugintotheCOMportofyourlaptop or other device.Make sure no other application is using the COM portselected.Make sure the COM port settings of your laptop orother device are set to the following:•Bits per second: 4800•Data bits: 8•Parity: None•Stop bits: 1•Flow control: HardwareTo set your phone to send location information toyour laptop or other device:1From the main menu, select GPS > Interface.2Set NMEA OUT to On.Your phone is now sending location data to yourlaptop or other device.To stop your phone from sending location data toyour laptop or other device:Set NMEA OUT to Off.Each time you power your phone on, NMEA OUT isautomatically set to Off.
69Voice RecordsNote: This is an optional feature. Contact yourservice provider about its availability forpurchase.A voice record is a recording you make with yourphone and can play back. You can record notes toyourself or phone calls.Yourphonecanstoreupto20voicerecords.Creating Voice RecordsTo record a note to yourself:1From the main menu, select VoiceRecord > [NewVoiceRec].2Say the message you want to record into themicrophone.Tip: To stop recording before you are finished,press Aunder Pause. To start recordingagain, press Aunder Rsume.3When you are finished recording, press O.Toaddtotheendofvoicerecord:1From the main menu, select VoiceRecord.2Select the voice record you want to add to.3Press m.4Select Add To.5When you are finished recording, press O.To record a phone call:1While on an active call, press m.2Select VoiceRecord.3When you are finished recording, press O.Note: Recording of phone calls is subject toapplicable laws regarding privacy andrecording of phone conversations.Playing Voice Records1From the main menu, select VoiceRecord.2Select the voice record you want to play.3To stop the voice record while it is playing, pressO.Tip: To fast forward, scroll right. To rewind, scrollleft. To pause or resume, press any key.Labelling Voice RecordsWhen you create a voice record, it is labeled with thetime and date it was recorded. You can then renameit with a custom label.1From the main menu, select VoiceRecord.2Select the voice record you want to label.3Press Aunder Label.
70Voice Records4Enter the label you want to assign. See “EnteringText”onpage83.5Press O.Deleting Voice RecordsTo delete a voice record:1From the main menu, select VoiceRecord.2Scroll to the unlocked voice record you want todelete.3Press m.4Select Delete.5Press Oor Aunder Yes to confirm.To delete all voice records:1From the main menu, select VoiceRecord.2Scroll to any voice record.3Press m.4Select Delete All.5Press Oor Aunder Yes to confirm.Locking Voice RecordsWhen you lock a message, it cannot be deleted untilyou unlock it.1From the main menu, select VoiceRecord.2Select the voice record you want to lock or unlock.3Select Lock to lock the message. -or-Select Unlock to unlock the message.When a voice record is locked, this icon Rappearsnext to it.Managing MemoryTo view the amount of memory available for voicerecords:1From the main menu, select VoiceRecord.2Press m.3Select Memory.To free more memory by deleting all unlocked voicerecords:1From the main menu, select VoiceRecord.2Press m.3Select Memory.4Select Delete.5Press Oor Aunder Yes to confirm.Note: Voice records are stored in your phoneusing the same memory space used to storering tones (see “Ring Tones” on page 35),Deleting ring tones frees memory space forvoice records.
71Advanced CallingFeaturesCall WaitingCall Waiting lets you receive a second call while onan active call. Call Waiting is always available, unlessyou turn it off for a specific call.Ifyouareonacallandreceiveasecondcall,yourphone emits a tone and displays a message sayingyou are receiving a second call.To accept the second call and put the active call onhold:Press Aunder Yes.To accept the second call and end the active call:1Press e.Your phone rings with the second call.2Answer the second call.To decline the second call:Press Aunder No.Ifyousubscribetovoicemail,the call is forwarded to your voice mail box.Turn Off Call WaitingTo turn off Call Waiting during a call:1Press m.2Select In Call Setup > Call Waiting.3Set this option to Off.Tip: To turn Call Waiting back on while still on thecall, set this option to On.To turn off Call Waiting for the next call you make orreceive:1From the main menu, select Settings > PhoneCalls > Call Waiting.2Set this option to Off.CallWaitingisturnedbackonwhenyouendthecall.Switching Between CallsAny time you have one call active and one call onhold, to make the call on hold active and put theactive call on hold:Press Aunder Switch.Putting a Call on Hold1While on an active call, press m.2Select Hold.
72Advanced Calling FeaturesIf you want to make the call active again, press Aunder Resume.Calling 2 PeoplePutting a Call on Hold, Making aSecond Call1Place or receive a phone call.2While the call is active, press m.3Select 2nd Call. This puts the call on hold.4Enter the second phone number you want to call.Tip: For quick ways to enter the number, press m.5Press Oor press sto place the call.To end the second call and make the call on holdactive again:Press e.Tomakethecallonholdactiveandputtheactivecallon hold:Press Aunder Switch.Making a 3-Way Call1Place or receive a phone call.2While the call is active, press m.3Select 3Way. This puts the call on hold.4Enter the second phone number you want to call.Tip: For quick ways to enter the number, press m.5Press Oor press sto place the call.6Press Aunder Join.All 3 people in the call can speak to and hear eachother.Merging 2 Calls into a 3-Way CallYou can combine 2 phone calls into a 3-way call anytimeyouhaveacallonholdandacallactive:1Press m.2Select Join.All 3 people in the call can speak to and hear eachother.Creating Pauses and WaitsWhile DialingYou can enter a pause or wait while dialing a number.For more information on pauses and waits, see“Creating Pauses and Waits” on page 31.To create a pause while dialing a phone number:1From the keypad, enter the digits you want tooccur before the pause.2Press m.
73Making International Calls3Select Insert Pause.4Enter the digits you want to occur after the pause.To create a wait while dialing a phone number:1From the keypad, enter the digits you want tooccur before the wait.2Press m.3Select Insert Wait.4Enter the digits you want to occur after the wait.Making International CallsNote: This feature may not be offered by yourservice provider.Plus Dialing lets you place an international call tomost countries without entering the local internationalaccess code.1Press and hold 0for two seconds. A “0” appears,then changes to a “+”.Note: The network translates the “+” into theappropriate international access codeneeded to place the call.2Enter the country code, city code, or area code,and phone number.Setting One Touch PTTOne Touch PTT sets your phone to call the mostrecent Private ID on the recent calls list, or to aPrivate ID you choose, every time you press the PTTbutton.To set your phone to call the most recent Private IDon the recent calls list:1From the main menu, select Settings > 2-WayRadio > One Touch PTT.2Set this option to Last Call.To set your phone to call a Private ID you choose:1From the main menu, select Settings > 2-WayRadio > One Touch PTT > Assign Number.2To enter the number you want your phone to callevery time you press the PTT button:Enter the number using your keypad. -or-Press Aunder Srch. Select Contacts,RecentCalls,orMemo. Enter the number from Contacts,the recent calls list, or Memo, as you would whenmaking a call.Tip: If you are entering a Talkgroup number, enter# before the number.
74Advanced Calling FeaturesTo turn off One Touch PTT:1From the main menu, select Settings > 2-WayRadio > One Touch PTT.2Set this option to Off.Setting Phone Cover ActionsFor Answering CallsTo set your phone to answer calls when you open thephone cover:1From the main menu, select Settings > PhoneCalls > Flip Activation > Flip to Ans.2Set this option to On.To set your phone not to answer calls when you openthe phone cover:Set Flip to Ans to Off in step 2.For Ending CallsTo set your phone to end calls when you close thephone cover:1From the main menu, select Settings > PhoneCalls > Flip Activation > Flip to End.2Set this option to On.To set your phone not to answer calls when you openthe phone cover:Set Flip to End to Off in step 2.Note: If you are using your phone with a headset,and you have the Flip to End option set toOn, closing your phone cover sendsincoming sound to the headset and does notend the call.Group CallsA group call is a Private call made to all members of aTalkgroup at once. A Talkgroup is a group of PrivateIDs.To receive group calls made to a Talkgroup, youmust join the Talkgroup. See “Joining a Talkgroup”on page 8.Making Group Calls1Press #. Then enter the Talkgroup number usingthe keypad. -or-Choose the Talkgroup name from Contacts orrecent calls list.2ProceedasifmakingaPrivatecall.Receiving Group CallsTo answer a group call:Proceed as if answering a Private call. Only oneperson at a time may speak on a group call.
75Call TimersTurningoffGroupCallsTo control whether you hear group calls to yourTalkgroup:1From the main menu, select Settings > 2-WayRadio > Tkgrp Silent.2Set this option On.To set your phone to let you receive group calls toyour Talkgroup:Set Talkgroup Silent to Off in step 2.Call TimersCall timers measure the duration of your phone calls,Private or group calls, and circuit data use, as well asthe number of Kilobytes sent and received by yourphone:•LastCall— displays the duration of your mostrecent phone call.• Phone Reset — keeps a running total of yourphone call minutes, until you reset it.• Phone Lifetime — displays the total minutes of allyour phone calls.• Prvt/Grp Reset — keeps a running total of all ofyour Private and group call minutes, until you resetit.• Prvt/Grp Lifetime — displays the total minutes ofall your Private and group calls.• Circuit Reset — keeps a running total of all ofyour circuit data use, until you reset it.• Circuit Lifetime — displays the total minutes of allof your circuit data use.• Kbytes Reset — keeps a running total of thenumber of Kilobytes sent and received by yourphone, until you reset it.To view or reset a timer:1From the main menu, select Call Timers.2To view a feature without resetting: Press Owhenyou are finished viewing. -or-To reset a feature: Press Aunder Reset.PressOor press Aunder Yes to confirm.Note: The values displayed by Call Timers shouldnot be used for billing. Call timers areestimates only.
76Advanced Calling FeaturesUsing Your Phone as a ModemNote: This feature may not be offered by yourservice provider.To use your phone as a modem with a laptop,handheld device, or desktop computer:1With the phone’s display facing up, insert a datacable’s connector into the accessory connector,until you hear a click.2Insert the data plug into the COM port of the otherdevice.When used as a modem, your phone has these datatransfer modes:•Circuit data — used for sending and receivingfaxes and for transferring large files•Packet data — used for small file transfers such asemailTo use these services, you must install the iDENWireless Data Services software (availableseparately). For more information on setting up yourcomputer and your i730 phone for packet and circuitdata calls, see the Wireless Data Services User’sGuide or contact your service provider.Making TTY CallsNote: Thisfeaturemaynotbeofferedbyyourservice provider.To use your phone to make phone calls using ateletypewriter (TTY) device:1Connect one end of a 2.5mm cable into the audiojack on your phone. Connect the other end of thecabletoyourTTYdevice.2Make sure that your phone’s TTY feature is on andselect the TTY mode you want to use.3Use your phone to enter phone numbers and makecalls.When you make a TTY call, these icons appear onthe phone’s display:NPhone call is active.OPhone call is on hold.
77Making TTY CallsTTY device features such as Turbo-Code,High-Speed, and Interruption are not supported byyour phone. These features must be turned off ordisabled to use your TTY device with your phone.TurningOntheTTYFeatureYour phone’s TTY feature must be on if you want tomake TTY calls, set the TTY mode, or change theTTY baud rate. To make sure the TTY feature is on:From the main menu, select Settings > PhoneCalls>TTY>UseTTY. This field must say On.Choosing a ModeYour phone supports these TTY modes:•TTY— You type and read text on your TTY device.•VCO(Voice-Carry-Over) — You speak into yourphone and read text replies on your TTY device.• HCO (Hearing-Carry-Over) — You type text onyour TTY device and listen to voice replies on yourphone speaker.To change mode while not in a call:1From the main menu, select Settings > PhoneCalls>TTY>Type.2Select the TTY mode you want.When you make a TTY call, the call begins in the TTYmode you last selected.To change mode during a call using your phone:1Press m.2Select In Call Setup > TTY > Type.3Selectthemodeyouwant.To change mode during a call using your TTY device,issue one of the following commands:•“VCO please” — to select VCO mode•“HCO please” — to select HCO mode•“HCO off please” — to turn off HCO modeImportant: When you are using HCO, the soundcoming from your phone speaker may beuncomfortably loud. Use caution whenputting the phone to your ear. (Forinformation on setting the volume of yourphone speaker, see “Setting the Volume”on page 91.)Changing the TTY Baud RateBy default, your phone’s TTY baud rate is set to45.45, the baud rate required for TTY calls within theU.S. To make calls outside the U.S., set your TTYbaud rate to 50.0.To change the TTY baud rate:1From the main menu, select Settings > PhoneCalls > TTY > Baud.
78Advanced Calling Features2Select the baud rate for your location.
79MemoMemoletsyoustoreanumber,makeacalltothatnumber, and save it to Contacts.To create a memo:1From the main menu, select Memo.2Enter the number using your keypad.3Press O.To view the memo later:1From the main menu, select Memo.To delete the memo:1From the main menu, select Memo.2Press and hold Aunder Dlete.To edit the memo:1From the main menu, select Memo.2Enter the new number.3Press O.To make a call to the memo number:1From the main menu, select Memo.2Press s.To store the memo number to Contacts:1From the main menu, select Memo.2Press m.3Select Store to Cntcts.4To store the number as a new entry, select [NewContact].-or-To store the number in an existing entry, select theentry.5With the Contacts type field highlighted, scroll leftor right to display the Contacts type you want toassign the number.6If you want to add more information to the entry,follow the applicable instructions in “CreatingEntries” on page 29.7Press Aunder Done.
80Memo
81ShortcutsShortcuts lets you access most menu options bypressing a number on your keypad or saying thevoice name of the shortcut. You create the shortcutandthenuseittotakeyoutothatscreenanytime.Creating a Shortcut1Go to the menu item you want to create a shortcutfor.For example, if you want to create a shortcut to thescreen for creating a new Contacts entry: From themain menu, select Contacts > [New Contacts].2Press and hold muntil a confirmation screenappears.3Press Oor press Aunder Yes.4A screen appears showing the number assigned tothe shortcut. If you want to change the numberassigned: Press Aunder Edit. Enter the numberyou want to assign. Press O.5Ifyouwanttorecordavoicenamefortheshortcut:Select Voice. As directed by the screen prompts,say and repeat the name you want to assign to thenumber. Speak clearly into the microphone.6Press Aunder Done.Using a ShortcutIf you know the shortcut number:1From the idle screen, press m.2On your keypad, press the number assigned to theshortcut.If you do not know the shortcut number:1From the main menu, select Shortcuts.2Select the shortcut you want to use.If you assigned a voice name to the shortcut:1Press t.2Say the voice name into your phone.Editing a ShortcutTo change the number assigned to a shortcut:1From the main menu, select Shortcuts.2Press m.3Select Reorder.4Select the shortcut you want to move.5Press Aunder Grab.6Scroll to the place where you want the shortcut toappear.7Press Aunder Insert.
82Shortcuts8Repeat step 4 through step 7 for all the items youwant to move.9Press Aunder Done.To change the name or number assigned to ashortcut:1From the main menu, select Shortcuts.2Press m.3Press Aunder Edit.Deleting ShortcutsTodeleteashortcut:1From the main menu, select Shortcuts.2Scroll to the shortcut you want to delete.3Press m.4Select Delete.To delete all shortcuts:1From the main menu, select Shortcuts.2Press m.3Select Delete.
83Entering TextYou can enter text into your phone using thetraditional method of pressing a key several times foreach character, or by pressing a key once for eachletter while words likely to be the one you want arechosen from a database. You can also enter symbolsand numbers into a text field.In screens that require you to enter text, you see thefollowing icons. These icons tell you which text inputmode you are using:When you access a screen that requires you to entertext, you start in the mode last used.To choose a text input mode:1At a screen that requires you to enter text, press m.2Select the text input mode you want to use.Using Alpha Mode•Press any key on the keypad to enter the letters,numbers, and symbols on that key. For example,to enter the letter Y, press 9three times.•Typealetterthenscrolluptomakethatletteruppercase, or type a letter then scroll down tomake that letter lowercase.•See “Special Function Keys” on page 84 for moreinformation on adding spaces, capitalization, andpunctuation.UsingWordModeIn Word mode, T9 Text Input analyzes the letters onthe keypad button you press and arranges them tocreate words. As you type, T9 Text Input matchesyour keystrokes to words in its database and displaysthe most commonly used matching word. You canadd you own words to this database.Entering a Word1Select Word as your text input mode.2Type a word by pressing one key for each letter.For example, to type “test” press 8378.The displayed word may change as you type it. Donottrytocorrectthewordasyougo.Typetotheend of the word before editing.lAlpha — Press a key several times for eachcharacter.jWord — Press a key once for each letter whilewords likely to be the one you want are chosenfrom a database.iSymbols — Enter punctuation and othersymbols.kNumeric — Enter numbers.
84Entering Text3If the word that appears is not the desired word,press 0to change the word on the display to thenext most likely word in the database.Repeat until the desired word appears.If the desired word does not appear, you can add it tothe database.Adding Words to the Database1Select Alpha as your text input mode.2Type the word using Alpha mode.3Select Word as your text input mode.4Press #.ThewordyoutypedinAlphatextentrymodeisnowin the database.Note: You cannot store alphanumericcombinations, such as Y2K.Choosing a LanguageTo change the language of the database:1At a screen that requires you to enter text, press m.2Select Languages.3Select the language you want for your database.Special Function KeysSome of the phone’s keys assume different functionswhile in Alpha or Word mode.SpacesPress #for a space.CapitalizationPress and hold #to make the next letter typeduppercase (shift), to make all subsequent letterstyped uppercase (caps lock), or to go back tolowercase letters.These icons appear in the top row of your display:When neither of these icons appear, letters typed arelowercase.Note: Your phone automatically makes the firstletter of a sentence uppercase.PunctuationPress 1to insert punctuation. One of eight basicpunctuation symbols will be inserted (. , - ? ! ’ @ :)mShift is on.nCaps lock is on.
85Using Numeric ModePress 0to change the inserted punctuation symbolto another of the eight basic punctuation symbols.Note: Additional punctuation symbols are availablein Symbols mode.Using Numeric Mode1Select Numeric as your text input mode.2Press the number buttons on your keypad to enternumbers.Using Symbols Mode1Select Symbols as your text input mode.A row of 32 symbols appears along the bottom ofthe phone’s display. Scroll right to view thecomplete row.2Press Oto select the highlighted symbol.
86Entering Text
87ProfilesA profile is a group of settings saved together so thatyou can apply to your phone easily.A profile contains these settings:•RingTones— sets all options described in “RingTones” on page 35, except assigning ring tones toContacts.• Display/Info —setsWallpaper,Color Palette,Text Size,andBacklight options. See“Display/Info Features” on page 95.• Phone Calls —setsSet Line and Auto Ansoptions. See “Phone Calls Features” on page 95.• Volume — sets all options described in “VolumeFeatures” on page 96.• Call Filter — controls which calls, call alerts, andmessage notifications your phone responds to.See “Setting Call Filtering” on page 90.• Advanced — sets headset option. See “Using aHeadset” on page 92.Your phone arrives with pre-set profiles. You can alsocreate your own profiles.Viewing ProfilesTo view the profiles stored in your phone:1From the main menu, select Profiles.2Selecttheprofileyouwanttoview.Tip: The profile that is currently in effect on yourphone has a checkmark next to it.3Press Aunder View.4Scroll and select settings to view their values.Switching ProfilesTo apply a profile to your phone:1Form the main menu, select Profiles.2Scroll to the profile you want to apply.3Press O.Theprofileyouselectedisnowineffect.How Changing Settings EffectsProfilesMany of the settings contained in profiles can be setwithout switching or editing profiles — for example,by selecting Settings or Ring Tones to set options,or by setting the volume of the phone’s ring using thevolume controls.
88ProfilesWhen you do this, your phone either:•Updates the profile in effect to reflect thesechanges, without notifying you -or-•Creates a temporary profile that contains thesechangesNote: This feature may not be offered by yourservice provider.To set your phone to create a temporary profile thatcontains changes you make to settings:1From the main menu, select Profiles.2Press m.3Select Setup > Temp. Settings.4Set this option to On.To set your phone to update the profile in effect toreflect any changes you make to settings:Set Temp. Settings to Off in step 4.If your service provider does not offer the Temp.Settings option, your phone always updates theprofileineffecttoreflectthechangesyoumaketosettings.For more information on temporary profiles, see“Temporary Profiles” on page 89.Creating Profiles1From the main menu, select Profiles.2Select [New Profile].-or-Scroll to any profile. Press m.SelectNew.3Enter the name you want to give the profile. See“Entering Text” on page 83.When you are finished, press O.4If you want to base this profile on an existingprofile: Select Copy from. Select the profile youwant to base this profile on.5Press Aunder Create.6Scroll the list of options and set their values.7Press Aunder Done.Editing Profiles1From the main menu, select Profiles.2Scroll to the profile you want to edit.3Press m.4Select Edit.5Follow the applicable instructions in “CreatingProfiles”onpage88toeditthevariousfields.
89Temporary ProfilesTemporary ProfilesIf your phone is set to create temporary profiles, atemporary profile is created when you make changesto settings without switching or editing profiles. See“How Changing Settings Effects Profiles” on page 87.A temporary profile is based on the profile in effectwhen you made the changes, but reflects thechanged settings. Making more changes furtherupdates the temporary profile, for as long as it is ineffect.A temporary profile stays in effect until you switchprofiles, power off your phone, or delete it (or theprofile it is based on) from the list of profiles.If you do not store a temporary profile, it is deletedwhen you switch profiles or power off your phone.A temporary profile is automatically given the samename as the profile it is based on, but with an asteriskinfrontofit.When you view a temporary profile’s settings, theoptions that differ from the profile it is based on havean asterisk in front of them.Storing a Temporary ProfileTo store a temporary profile as a new profile:1From the main menu, select Profiles.2Scroll to the temporary profile.3Press m.4Select Store As New.5Enter the name you want to give the profile. See“Entering Text” on page 83.When you are finished, press O.To overwrite the profile that temporary profile isbased on:1From the main menu, select Profiles.2Scroll to the temporary profile.3Press m.4Select Store Changes.Thetemporaryprofileisstoredwiththenameoftheprofile it is based on. The profile it is based on, as itexisted before you made changes to settings, isgone.Deleting ProfilesTo delete a profile:1From the main menu, select Profiles.2Selecttheprofileyouwanttodelete.Note: A temporary profile is automatically deletedwhen the profile it is based on is deleted.3Press m.
90Profiles4Select Delete.5Press Oor press Aunder Yes to confirm.To delete all profiles:1From the main menu, select Profiles.2Press m.3Select Delete All.4Press Oor press Aunder Yes to confirm.Setting Call FilteringThe call filtering setting in each profile lets you controlwhich calls, call alerts, and message notificationsyour phone notifies you of, and which it ignores.To set call filtering:1While setting options for a profile, select CallFilter.2To set filtering options for phone calls, selectPhone.•Offsets your phone to notify you of all phonecalls.•Allsets your phone to ignore all phone calls.• All Contacts sets your phone to notify you onlyof phone calls from numbers stored in Contacts.• Some Contacts sets your phone to notify youonly of phone calls from numbers you selectfrom Contacts.3If you set the Phone option to Some Contacts,select up to 5 Contacts entries that contain phonenumbers you want to be notified of calls from.When you are finished, press Aunder Done.4To set filtering options for Private calls and groupcalls, select Prvt/Grp.•Offsets your phone to notify you of all Privatecalls and group calls.•Onsets your phone to ignore all Private callsand group calls.5To set filtering options for call alerts, select Alerts.•Offsets your phone to notify you of all callalerts.•Onsets your phone to ignore all call alerts.6To set filtering options for message notifications,select Notifications.•Offsets your phone notify you of all messages.•Onsetsyourphonenottosoundatoneorvibrate when you receive a message. Themessages notification screen appears as usual.7Press Aunder Done.
91Customizing Your PhoneSetting the VolumeTo set the volume of the sound coming from thephone’s earpiece or speaker:1From the main menu, select Settings > Volume.2Select Earpiece to set the earpiece volume. -or-Select Speaker to set the speaker volume.3To set the volume:Scroll left or right. -or-Press the volume keys on the side of your phone.4Press O.To set the volume of the phone’s ring:Press the volume controls.For another way to set the volume of the phone’sring, or the volume of many other sounds your phonemakes:1From the main menu, select Settings > Volume.2Scroll to the option you want and make thechange. Choose Line 1 or Line 2 to set the volumeof the phone’s ring when you get a call on that line.See “Volume Features” on page 96.Setting Your Phone to Not RingTo set your phone to make no sound when youreceive phone calls, Private calls, group calls,message notifications, and call alerts, see “TurningRing Tones Off” on page 35.To set your phone to vibrate instead of making asound when you receive Private calls and groupcalls, even if you want your phone to ring for otherfeatures:1From the main menu, select Settings > 2-WayRadio > Alert Type.Tip: If Alert Type does not appear: From the mainmenu, select Ring Tones.MakesureVibe Allis set to Off. Repeat step 1.2Select Vibrate tosetyourphonetovibrate.-or-Select Silent to set your phone to neither vibratenor make a sound.Temporarily Turning Off CallsSometimes you may want to have your phone on, butturn off its ability to make and receive calls, such aswhen you are on an airplane.
92Customizing Your PhoneTo set your phone so that it can not make or receivephone calls, Private calls, or group calls, or transferdata:1From the main menu, select Settings > Advanced> Service.2Set this option to Off.To restore your phone ability to do all these things:Set this option to On.Using a HeadsetIf you use a headset or similar device with yourphone, you can set your phone to send incomingsound to the headset only, or to the headset and thespeaker at the same time:1From the main menu, select Settings > Advanced>Headset/Spkr.2Select HdsetOnly to send incoming sound to theheadset only. -or-Select Hdset&Spkr to send incoming sound to theheadset and the speaker at the same time.Note: If you are using your phone with a headset,and you have the Flip to End option set toOn, closing your phone cover sendsincoming sound to the headset and does notend the call. See “Setting Phone CoverActions” on page 74.Seeing the Display BetterSetting ContrastTo set the contrast of the display:1From the main menu, select Settings >Display/Info > Contrast.2To set the contrast of the full-sized display, selectInt. Display.-or-To set the contrast of the one-line display, selectExt. Display.3Scroll left or right to set the contrast.Setting Text SizeTo set the size of the text on the full-size display:1From the main menu, select Settings >Display/Info > Text Size.2Select the option you want:•Standard— 14 characters per line• Compressed — 18 characters per line•Zoom— 11 characters per lineTo set your phone to briefly display very large digitswhen you enter numbers at the idle screen:1From the main menu, select Settings >Display/Info > Large Dialing.
93Putting Your Favorites First2Set this option to Large Digits.LargeMainMenuIconsTo make the items on your main menu appear aslarge icons:1From the main menu, select Settings >Display/Info > Menu View.-or-From the main menu: Press m. Select Menu View.2Set this option to View Icons.Setting the BacklightA backlight lights the display and keypad when youmake or receive a call, open or close the phonecover, or press keys or buttons.To control how long the backlight stays on:1From the main menu, select Settings >Display/Info > Backlight > Backlight.2Select the number of seconds you want thebacklight to stay on. -or-Select Off if you never want the backlight on. -or-To set the keypad backlight to light up only in low lightconditions:1From the main menu, select Settings >Display/Info > Backlight > Sensor.2Set this option to On.Putting Your Favorites FirstSeveral features let you make the items you use themost easy to access.Setting the Order of the Main MenuTo change the order of the items on the main menu:1From the main menu, select Settings >Personalize > Menu Options > Reorder Menu.2Select the item you want to move.3Press Aunder Grab.4Scroll to the place where you want the item toappear.5Press Aunder Insert.6Repeat step 2 through step 5 for all the items youwant to move.7Press Aunder Done.Note: The More option can not be moved.Assigning Main Menu Items to KeysYou can assign a main menu item to each of the fourparts of the navigation key, to O, and to the left andright A.Youcanaccessthesemainmenuitemfromtheidlescreenbypressingthekeyitisassignedto.1From the main menu, select Settings >Personalize.
94Customizing Your Phone2Selecttheoptionforthekeyyouwanttoassignamain menu item to.3Select the main menu item you want to assign.SettinganItemtoStartatPowerUpTo set a main menu item to be the first thing you seewhen you power up your phone:1From the main menu, select Settings >Personalize > Power Up.2Selectthemainmenuitemyouwant.To set the idle screen to be the first thing you seewhen you power up your phone:Select Default Ready in step 2.Java Applications on the Main MenuFor information on making shortcuts to Javaapplications stored on your phone into main menuitems, see “Shortcuts on the Main Menu” on page 57.Shortcuts to Other MenusFor information on creating shortcuts to other menusand screens, see “Shortcuts” on page 81.Changing the Look of YourPhoneWallpaperTo change the wallpaper that appears on the idlescreen:1From the main menu, select Settings >Display/Info > Wallpaper.2Scroll to the wallpaper you want.3If you want to see what the wallpaper looks like,press Aunder View.4Press O.ColorsTo change the color scheme of the display:1From the main menu, select Settings >Display/Info > Palette.2Select the color palette you want.Using SettingsSettings contains many submenus that let youcustomize your phone.For information on applying groups of setting to yourphone together, see “Profiles” on page 87.
95Using SettingsDisplay/Info FeaturesThe Display/Info menu controls how the keypad anddisplay appear:• Wallpaper — See “Wallpaper” on page 94.• Palette — See “Colors” on page 94.•TextSize— sets size of text on the display. See“Setting Text Size” on page 92.• Home Icons — controls whether main menu iconsappear on the idle screen.• Backlight — See “Setting the Backlight” on page93.•Clock— controls whether the time and dateappear on the idle screen; sets time and dateformat; sets year.•MenuView— See “Large Main Menu Icons” onpage 93.• Large Dialing —Sets large digits to appear on theidle screen when you enter a number. See “SettingText Size” on page 92.•Contrast— See “Setting Contrast” on page 92.•Language— sets the language that your phonedisplays.Phone Calls FeaturesThe Phone Calls menu controls how your phonehandles phone calls:•SetLine— sets phone line 1 or phone line 2 asthe active line for outgoing calls.•AnyKeyAns— If this feature is on, you cananswercallsbypressinganykeyonthekeypad.•AutoRedial— sets your phone to automaticallyredial calls you make when the system is busy.•CallWaiting— See “Call Waiting” on page 71.• Auto Ans — sets your phone to automaticallyanswer an incoming call after a specified numberof rings. When this feature is on, the phoneanswers by connecting you to the caller; it doesnot send the call to voice mail, unless you are outof coverage or on the line.• Flip Activation — See “Setting Phone CoverActions” on page 74.• Minute Beep — causes a beep to sound everyminute of an active call.•CallDuration— causes the duration of a call toappear on the display when the call ends.• TTY — See “Making TTY Calls” on page 76.• Notifications — See “Setting Notification Options”on page 39.
96Customizing Your Phone• Java App Control — If you have installed a Javaapplication that answers phone calls, this settinglets you turn that application on.2-Way Radio FeaturesThe 2-Way Radio menu controls how your phonehandles Private calls and group calls:•TkgrpSilent— controls whether you hear groupcalls to your Talkgroup. See “Receiving GroupCalls” on page 74.•TkgrpArea— lets you name Talkgroups andchoose your Talkgroup area.• One Touch PTT — See “Setting One Touch PTT”on page 73.•AlertType— sets your phone to make no soundwhen you receive Private calls and group calls.See page 91.Personalize FeaturesThe Personalize menu makes main menu itemseasier to access. See “Putting Your Favorites First”on page 93.Volume FeaturesThe Volume menu sets the volume of sounds yourphone makes:•Line1— sets ringer volume for phone line 1.•Line2— sets ringer volume for phone line 2.• Messages — sets the volume of messagenotifications and Datebook reminders.• Earpiece — sets the volume of sound coming outof the earpiece.• Speaker — sets the volume of sound coming outof the speaker.•Keypad— sets the volume of sound associatedwith pressing keys and buttons.• Java Earpiece — sets the volume of soundassociated with Java applications coming out ofthe earpiece.• Java Speaker —sets the volume of soundassociated with Java applications coming out ofthe speakers.•Data— sets the volume of sounds that notify youthat you are receiving a circuit data call.Security FeaturesThe Security menu lets you turn security features onand off and change passwords:• Phone Lock — turns on a feature that locks yourphone, either immediately or automatically after aset period of inactivity. An unlock code is requiredto enable this feature, to unlock the phone, and toset a new Unlock code. Contact your serviceprovider for your default unlock code.
97Using Settings•KeypadLock— locks the phone’s keypad, eitherimmediately or automatically after a set period ofinactivity. See “Locking the Keypad” on page 15 formore information on locking and unlocking thekeypad.•SIMPIN— enables and disables your phone’sSIM PIN security feature. See “Turning the PINRequirement On and Off” on page 13.• GPS PIN — enables and disables your phone’sGPS PIN security feature. See “Setting the GPSPIN Security Feature” on page 66.• Change Passwords — changes your phoneunlock code, security code SIM PIN, and GPS PIN.Advanced FeaturesThe Advanced menu contains advanced and rarelyused Settings features.• Alert Timeout — sets the amount of time a tonecontinues to sound when you receive a messagenotification, call alert, or Datebook reminder.• Headset/Spker — See “Using a Headset” on page92.• Connectivity —Network ID sets the phone’snetwork IDs and their roaming options under thedirection of your service provider; Master Resetlets your service provider reset your service in theevent of a security or provisioning problem.• Reset Defaults —Reset Settings returns allsettings to their original defaults; Reset All returnsall settings to their original defaults and erases allstored lists. Use only under the direction of yourservice provider.•ReturntoHome— controls how long the recentcalls list displays after calls.• Service — See “Temporarily Turning Off Calls” onpage 91.• Phone Only — prevents your phone from makingor receiving Private calls or group calls. ortransferring data.•BaudRate— sets the baud rate at which yourphone communicates with a laptop computer, PC,or similar device.
98Customizing Your Phone
99Understanding StatusMessagesYou may receive status messages under certainconditions. Before contacting your service provider,note the message, numeric code, and the conditionsunder which it appeared. The following table lists anddescribes the status messages.Note: When your phone cover is closed, theone-line display screen shows a shortenedversion the status messages displayed inthe full-size screen. To see complete statusmessages, open the phone cover.StatusMessages(one-linedisplay)StatusMessages(full-screendisplay)Message DescriptionNot in Srvc. Number Not inServiceThe number that youentered is not valid.Not Avail. User NotAvailableThe phone that you calledis either busy, out ofcoverage, or turned off.Please try again later.Not Avail. User NotAuthorizedThe person that you calledhas not purchased thisservice.Failed Please TryLaterThis service is temporarilynot available. Please tryagain later.Busy in Prvt. Not Available The phone that you calledis busy in a Private call.Busy in Data User Busy inDataThe phone that you calledis busy transfering data.Restricted ServiceRestrictedThis service was restrictedby your service provider, orthis service was notpurchased.Not Avail. Service NotAvailableThis feature is not availableon the current network.SystemBusy System Busy The system is experiencingheavy traffic. Please tryagain later.Failed ServiceConflictThis service cannot beenabled because anincompatible service hasalready been turned on.Try Again Please TryAgainAn error occurred. Pleasetry again.StatusMessages(one-linedisplay)StatusMessages(full-screendisplay)Message Description
100Understanding Status MessagesSelf Check Self CheckError + NumberCodeA fault was detected withyour phone. If this errorrecurs, note the error codeand contact CustomerCare.Self Check Self Check Fail+ Number CodeAn operational fault wasdetected with your phone.Note the numeric code,turn your phone off, andcontact Customer Care.PIN Blocked PIN BlockedCall YourProviderThe incorrect PIN wasentered three consecutivetimes. You will be unable toplace or receive calls onyour phone. Contact NextelCustomer Care to havethem obtain the PINUnblocking Key (PUK)code.Insert SIM Insert SIM Your SIM Card is not beingdetected. Please check toensure that you haveinserted the SIM Card.Check SIM Check SIMCardPlease check your SIMCard to make sure it hasbeen inserted properly.StatusMessages(one-linedisplay)StatusMessages(full-screendisplay)Message DescriptionNo message. Wrong PIN You have entered anincorrect PIN number.No message. Wrong Code Your phone will not accepta non-Nextel SIM card.EnterPIN EnterPIN Please enter your 4- to 8-digit SIM PIN code.Unit Lock Enter UnlockCodeAuto Phone Lock isactivated. Enter you unlockcode.Low Memory New BrowserMessageMemory Full!Warns of low memory forNet Alerts.StatusMessages(one-linedisplay)StatusMessages(full-screendisplay)Message Description
101Safety and GeneralInformationIMPORTANT INFORMATION ON SAFE ANDEFFICIENT OPERATION.READ THIS INFORMATION BEFORE USING YOURINTEGRATED MULTI-SERVICE PORTABLERADIO.RF Operational CharacteristicsYour radio product contains a radio frequencytransmitter to convey the information you wish tosend as well as occasional automatic signals used tosustain connection to the wireless network, and areceiver which enables you to receive communicationand connection information from the network.Portable Radio ProductOperation and EME ExposureYour Motorola radio product is designed to complywith the following national and internationalstandards and guidelines regarding exposure ofhuman beings to radio frequency electromagneticenergy (EME):•United States Federal CommunicationsCommission, Code of Federal Regulations; 47CFR part 2 sub-part J.•American National Standards Institute (ANSI) /Institute of Electrical and Electronics Engineers(IEEE). C95. 1-1992.•Institute of Electrical and Electronics Engineers(IEEE). C95. 1-1999 Edition.•International Commission on Non-IonizingRadiation Protection (ICNIRP) 1998.•Ministry of Health (Canada). Safety Code 6. Limitsof Human Exposure to RadiofrequencyElectromagnetic Fields in the Frequency Rangefrom 3 kHz to 300 GHz, 1999.•Australian Communications AuthorityRadiocommunications (Electromagnetic Radiation- Human Exposure) Standard 2001.•ANATEL, Brasil Regulatory Authority, Resolution256 (April 11, 2001) “additional requirements forSMR, cellular and PCS product certification.”To assure optimal radio product performance andmake sure human exposure to radio frequencyelectromagnetic energy is within the guidelinesset forth in the above standards, always adhereto the following procedures:
102Safety and General InformationPhone OperationWhen placing or receiving a phone call, hold yourradio product as you would a wireline telephone.Speak directly into the microphone.Two-way radio operationWhen using your radio product as atraditional two-way radio, hold theradio product in a vertical positionwith the microphone one to twoinches (2.5 to 5 cm) away from the lips.Body-worn operationTo maintain compliance with FCC RF exposureguidelines, if you wear a radio product on your bodywhen transmitting, always place the radio product ina Motorola approved clip, holder, holster, case orbody harness for this product.Useofnon-Motorola-approved accessories may exceedFCC RF exposure guidelines. IfyoudonotuseaMotorola approved body-worn accessory and arenot using the radio product in the intended usepositions along side the head in the phone modeor in front of the face in the two-way radio mode,then ensure the antenna and the radio productare kept the following minimum distances fromthe body when transmitting• Phone or Two-way radio mode: one inch (2.5cm)• Data operation using any data feature with orwithout an accessory cable: one inch (2.5 cm)Antenna CareUse only the supplied or an approvedreplacement antenna. Unauthorized antennas,modifications, or attachments could damage theradio product and may violate FCC regulations.DO NOT hold the antenna when the radio productis “IN USE”. Holding the antenna affects call qualityand may cause the radio product to operate at ahigher power level than needed.Approved AccessoriesFor a list of approved Motorola accessories call1-800-453-0920, or visit our website atwww.mot.com/iden.
103Portable Radio Product Operation and EME ExposureALL MODELS WITH FCC ID AZ489FT5824 MEET THEGOVERNMENT’S REQUIREMENTS FOR EXPOSURE TORADIO WAVES.Your wireless phone is a radio transmitter and receiver. It isdesigned and manufactured not to exceed the emission limitsfor exposure to radiofrequency (RF) energy set by theFederal Communications Commission of the U.S.Government. These limits are part of comprehensiveguidelines and establish permitted levels of RF energy for thegeneral population. The guidelines are based on standardsthat were developed by independent scientific organizationsthrough periodic and thorough evaluation of scientific studies.The standards include a substantial safety margin designedto assure the safety of all persons, regardless of age andhealth.The exposure standard for wireless mobile phones employsa unit of measurement known as the Specific AbsorptionRate,orSAR.TheSARlimitsetbytheFCCis1.6W/kg.1Tests for SAR are conducted using standard operatingpositions reviewed by the FCC with the phone transmitting atits highest certified power level in all tested frequency bands.Although the SAR is determined at the highest certifiedpower level, the actual SAR level of the phone whileoperating can be well below the maximum value. This isbecause the phone is designed to operate at multiple powerlevels so as to use only the power required to reach thenetwork. In general, the closer you are to a wireless basestation antenna, the lower the power output.Before a phone model is available for sale to the public, itmust be tested and certified to the FCC that is does notexceed the limit established by the government-adoptedrequirement for safe exposure. The tests are performed inpositions and locations (e.g., at the ear and worn on thebody) as required by the FCC for each model. The highestSAR value for this model phone when tested for use at theear is 1.163 W/kg and when tested on the body, as describedin this user guide, is 1.15 W/kg during packet datatransmission. (Body-worn measurements differ among phonemodels, depending upon available accessories and FCCrequirements.)2While there may be differences between the SAR levels ofvarious phones and at various positions, they all meet thegovernment requirement for safe exposure.The FCC has granted an Equipment Authorization for thismodel phone with all reported SAR levels evaluated as incompliance with the FCC RF exposure guidelines. SARinformation on this model phone is on file with the FCC andcan be found under the Display Grant section ofhttp://www.fcc.gov/oet/fccid after searching on FCC IDAZ489FT5824.Additional information on Specific Absorption Rates (SAR)can be found on the Cellular Telecommunications IndustryAssociation (CTIA) web-site at http://www.wow-com.com.1In the United States and Canada, the SAR limit for mobilephones used by the public is 1.6 watts/kg (W/kg) averagedover one gram of tissue. The standard incorporates asubstantial margin of safety to give additional protection forthe public and to account for any variations inmeasurements.2The SAR information includes the Motorola testing protocol,assessment procedure, and measurement uncertaintyrange for this product.
104Safety and General InformationElectro MagneticInterference/CompatibilityNote: Nearly every electronic device issusceptible to electromagneticinterference (EMI) if inadequatelyshielded, designed or otherwiseconfigured for electromagneticcompatibility.FacilitiesTo avoid electromagnetic interference and/orcompatibility conflicts, turn off your radio product inany facility where posted notices instruct you to doso. Hospitals or health care facilities may be usingequipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your radio productwhen on board an aircraft. Any use of a radio productmust be in accordance with applicable regulationsper airline crew instructions.Medical DevicesPacemakersThe Advanced Medical Technology Association(AdvaMed) recommends that a minimum separationof 6 inches (15 cm) be maintained between ahandheld wireless radio product and a pacemaker.These recommendations are consistent with those ofthe U.S. Food and Drug Administration.Persons with pacemakers should:•ALWAYS keep the radio product more than 6inches (15 cm) from their pacemaker when theradio product is turned ON.•Not carry the radio product in a breast pocket.•Use the ear opposite the pacemaker to minimizethe potential for interference.•Turn the radio product OFF immediately if youhave any reason to suspect that interference istaking place.Hearing AidsSome digital wireless radio products may interferewith some hearing aids. In the event of suchinterference, you may want to consult your hearingaid manufacturer to discuss alternatives.
105Operational WarningsOther Medical DevicesIf you use any other personal medical device, consultthe manufacturer of your device to determine if it isadequately shielded from RF energy. Your physicianmay be able to assist you in obtaining thisinformation.Use While DrivingCheck the laws and regulations on the use of radioproducts in the area where you drive. Always obeythem.When using the radio product while driving, please:•Give full attention to driving and to the road.•Use hands-free operation, if available.•Pull off the road and park before making oranswering a call if driving conditions so require.Operational WarningsFor Vehicles with an Air BagDo not place a portable radio product in the area overthe air bag or in the air bag deployment area. Airbags inflate with great force. If a portable radio isplaced in the air bag deployment area and the air baginflates, the radio product may be propelled withgreat force and cause serious injury to occupants ofthe vehicle.Potentially Explosive AtmospheresTurn off your radio product prior to entering any areawith a potentially explosive atmosphere, unless it is aradio product type especially qualified for use in suchareas as “Intrinsically Safe” (for example, FactoryMutual, CSA, or UL approved). Do not remove,install, or charge batteries in such areas. Sparks in apotentially explosive atmosphere can cause anexplosion or fire resulting in bodily injury or evendeath.Note: The areas with potentially explosiveatmospheres referred to above includefueling areas such as below decks onboats, fuel or chemical transfer orstorage facilities, areas where the aircontains chemicals or particles, such asgrain, dust or metal powders, and any!!
106Safety and General Informationother area where you would normally beadvised to turn off your vehicle engine.Areas with potentially explosiveatmospheres are often but not alwaysposted.Blasting Caps and AreasTo avoid possible interference with blastingoperations, turn off your radio product when you arenear electrical blasting caps, in a blasting area, or inareas posted: “Turn off two-way radio”. Obey all signsand instructions.Operational CautionsAntennasDo not use any portable radio product that has adamaged antenna. If a damaged antenna comesinto contact with your skin, a minor burn can result.BatteriesAll batteries can cause property damage and/orbodily injury, such as burns if a conductive materialsuch as jewelry, keys, or beaded chains touchesexposed terminals. The conductive material maycomplete an electrical circuit (short circuit) andbecome quite hot. Exercise care in handling anycharged battery, particularly when placing it inside apocket, purse, or other container with metal objects.Cleaning and Drying ConsiderationsUsing a leather carry case may help protect thesurfaces and help prevent liquids (e.g., rain) fromentering into the interior of the radio product. Thisproduct is not water proof, and exposing the unit toliquids may result in permanent damage to the unit.If your radio product interior gets wet, then do not tryto accelerate drying with the use of an oven or a dryeras this will damage the radio product and void thewarranty. Instead, do the following:1Immediately power off the radio product.2Remove Battery and SIM card (if so equipped)from radio product.3Shake excess liquid from radio product.4Place the radio product and battery in an area thatis at room temperature and has good air flow.5Let the radio product, battery, and SIM card dry for72 hours before reconnecting the battery and/orpowering on the radio product.If the radio product does not work after following thesteps listed above, contact your dealer for servicinginformation.!
107Accessory Safety InformationClean the external surfaces of the radio product withadampcloth,usingamildsolutionofdishwashingdetergent and water. Some household cleaners maycontain chemicals that could seriously damage theradio product. Avoid the use of any petroleum-basedsolvent cleaners. Also, avoid applying liquids directlyon the radio product.Accessory Safety InformationImportant: Save these accessory safety instructions.•Before using any battery or battery charger, readall the instructions for and cautionary markings on(1) the battery, (2) the battery charger, which mayinclude a separate wall-mounted power supply ortransformer, and (3) the radio product using thebattery.•Do not expose any battery charger to water, rain,or snow as they are designed for indoor orin-vehicle use only.•To reduce the risk of damage to the cord or plug,pull by the plug rather than the cord when youdisconnect the battery charger from the powersource outlet.•Do not operate any battery charger with adamaged cord or plug — replace themimmediately.•Battery chargers may become warm duringoperation, but not hot. If it becomes hot to thetouch, unplug it from the power outlet immediatelyand discontinue its use.•Use of a non-recommended attachment to abattery charger may result in a risk of fire, electricshock, or injury to persons.•Make sure the battery charger power cord islocated so that it will not be stepped on, trippedover, or subjected to damage or stress.•An extension cord should not be used with anybattery charger unless absolutely necessary. Useof an improper extension cord could result in a riskof fire and electric shock. If an extension cord mustbe used, make sure that:•The pins on the plug of the extension cord arethe same number, size, and shape as those ontheplugofthecharger.•The extension cord is properly wired and ingood electrical condition.Warning: To reduce the risk of injury,charge only the rechargeable batteriesdescribed in “Battery” on page 3through page 5. Other types ofbatteries may burst, causing personalinjury and damage.!!
108Safety and General Information•The cord size is 18AWG for lengths up to 100feet and 16AWG for lengths up to 150 feet.•Do not operate any battery charger if it hasreceived a sharp blow, has been dropped, orhas been damaged in any way; take it to aqualified service technician.•Do not disassemble a battery charger; take it toaqualifiedservicetechnicianwhenserviceorrepair is required. Incorrect reassembly mayresult in a risk of electric shock or fire.•Maximum ambient temperature around thepower supply or transformer of any batterycharger should not exceed 40°C (104°F).•The output power from the power supply ortransformer must not exceed the rating given onthe Desktop Dual-Pocket Charger.•The disconnection from the line voltage is madeby unplugging the power supply from the ACreceptacle.•To reduce risk of electric shock, unplug anybattery charger from the outlet before attemptingany maintenance or cleaning.For optimum charging performance, turn off the radioproduct while charging it in any battery charger.
109Driving Safety Tips“Safety is your most important call!”Your Motorola wireless telephone gives you thepowerful ability to communicate by voice — almostanywhere, anytime, wherever wireless phone serviceis available and safe conditions allow. But animportant responsibility accompanies that benefits ofwireless phones, one that every user must uphold.When driving a car, driving is your first responsibility.If you find it necessary to use your wireless phonewhile behind the wheel of a car, practice goodcommon sense and remember the following tips:•Get to know your Motorola wireless phone and itsfeatures such as speed dial and redial. If available,these features help you to place your call withouttaking your attention off the road.•When available, use a hands-free device. Ifpossible, add an additional layer of convenience toyour wireless phone with one of the many MotorolaOriginal hands-free accessories available today.•Position your wireless phone within easy reach. Beable to access your wireless phone withoutremoving your eyes from the road. If you receivean incoming call at an inconvenient time, ifpossible, let your voice mail answer it for you.•Let the person you are speaking with know you aredriving; if necessary, suspend the call in heavytraffic or hazardous weather conditions. Rain,sleet, snow, ice, and even heavy traffic can behazardous.•If you receive an incoming call at an inconvenienttime do not take notes or look up phone numberswhile driving. Jotting down a “to do” list or goingthrough your address book takes attention awayfrom your primary responsibility — driving safely.•Dial sensibly and assess the traffic; if possible,place calls when you are not moving or beforepullingintotraffic.Trytoplancallswhenyourcarwill be stationary. If you need to make a call whilemoving, dial only a few numbers, check the roadand your mirrors, then continue.•Do not engage in stressful or emotionalconversations that may be distracting. Makepeople you are talking with aware you are drivingand suspend conversations which have thepotential to divert your attention away from theroad.•Your phone can perform many other functionsbesides allowing you to make and receive calls. Donot let these features distract you from driving. Usethem only when it is safe to do so.
110Driving Safety Tips•Use your wireless phone to call for help. Dial 9-1-1or other local emergency number in the case offire, traffic accident or medical emergencies.•Use your wireless phone to help others inemergencies. If you see an auto accident, crime inprogress or other serious emergency where livesare in danger, call 9-1-1 or other local emergencynumber, as you would want others to do for you.•Call roadside assistance or a specialnon-emergency wireless assistance number whennecessary. If you see a broken-down vehicleposing no serious hazard, a broken traffic signal, aminor traffic accident where no one appearsinjured, or a vehicle you know to be stolen, callroadside assistance or other specialnon-emergency wireless number.
111MOTOROLA LIMITEDWARRANTYNote: FOR IDEN SUBSCRIBER PRODUCTS,ACCESSORIES AND SOFTWAREPURCHASED IN THE UNITED STATESOR CANADAWhat Does this Warranty Cover?Subject to the exclusions contained below, Motorola,Inc. warrants its Motorola iDEN Digital Mobile andPortable Handsets ("Products"), Motorola-branded orcertified accessories sold for use with these Products("Accessories") and Motorola software contained onCD-Roms or other tangible media and sold for usewith these Products ("Software") to be free fromdefects in materials and workmanship under normalconsumer usage for the period(s) outlined below.This limited warranty is a consumer's exclusiveremedy, and applies as follows to new Products,Accessories and Software purchased byconsumers in the United States or Canada, whichare accompanied by this written warranty:PRODUCTS COVERED LENGTH OFCOVERAGEProducts as definedabove. One (1) year from thedate of purchase by thefirst consumer purchaserof the product.Accessories as definedabove. One (1) year from thedate of purchase by thefirst consumer purchaserof the product.Products orAccessories that areRepaired or Replaced.The balance of theoriginal warranty or forninety (90) days fromthedatereturnedtotheconsumer, whichever islonger.Software as definedabove. Applies only tophysical defects in themedia that embodies thecopy of the software (e.g.CD-ROM, or floppy disk).Ninety (90) days fromthe date of purchase.
112MOTOROLA LIMITED WARRANTYWhat is not covered? (Exclusions)Normal Wear and Tear. Periodic maintenance,repair and replacement of parts due to normal wearand tear are excluded from coverage.Batteries. Only batteries whose fully chargedcapacity falls below 80% of their rated capacity andbatteries that leak are covered by this limitedwarranty.Abuse & Misuse. Defects or damage that resultfrom: (a) improper operation, storage, misuse orabuse, accident or neglect, such as physical damage(cracks, scratches, etc.) to the surface of the productresulting from misuse; (b) contact with liquid, water,rain, extreme humidity or heavy perspiration, sand,dirt or the like, extreme heat, or food; (c) use of theProducts or Accessories for commercial purposes orsubjecting the Product or Accessory to abnormalusage or conditions; or (d) other acts which are notthe fault of Motorola, are excluded from coverage.Use of Non-Motorola Products and Accessories.Defects or damage that result from the use ofNon-Motorola branded or certified Products,Accessories, Software or other peripheral equipmentare excluded from coverage.Unauthorized Service or Modification. Defects ordamages resulting from service, testing, adjustment,installation, maintenance, alteration, including withoutlimitation, software changes, or modification in anyway by someone other than Motorola, or itsauthorized service centers, are excluded fromcoverage.Altered Products. Products or Accessories with (a)serial numbers or date tags that have been removed,altered or obliterated; (b) broken seals or that showevidence of tampering; (c) mismatched board serialnumbers; or (d) nonconforming or non-Motorolahousings, antennas, or parts, are excluded fromcoverage.Communication Services. Defects, damages, or thefailure of Products, Accessories or Software due toany communication service or signal you maysubscribetoorusewiththeProducts,AccessoriesorSoftware is excluded from coverage.SoftwareEmbodiedinPhysicalMedia.Nowarranty is made that the software will meet yourrequirements or will work in combination with anyhardware or software applications provided by thirdparties, that the operation of the software productswill be uninterrupted or error free, or that all defects inthe software products will be corrected.
113SoftwareNOTEmbodiedinPhysicalMedia.Software that is not embodied in physical media (e.g.software that is downloaded from the internet), isprovided "as is" and without warranty.Who is covered? This warranty extends only to thefirst consumer purchaser, and is not transferable.What will Motorola Do? Motorola, at its option, willat no charge repair, replace or refund the purchaseprice of any Products, Accessories or Software thatdoes not conform to this warranty. We may usefunctionally equivalentreconditioned/refurbished/pre-owned or newProducts, Accessories or parts. No data, software orapplications added to your Product, Accessory orSoftware, including but not limited to personalcontacts, games and ringer tones, will be reinstalled.To avoid losing such data, software and applicationsplease create a back up prior to requesting service.How to Obtain Warranty Service or OtherInformation? To obtain service or information,please call:Motorola iDEN Customer Services 1-800-453-0920or 954-723-4910TTY-877-483-2840Or visit us online athttp://www.motorola.com/iden/supportYou will receive instructions on how to ship theProducts, Accessories or Software, at your expense,to a Motorola Authorized Repair Center. To obtainservice, you must include: (a) a copy of your receipt,bill of sale or other comparable proof of purchase; (b)a written description of the problem; (c) the name ofyour service provider, if applicable; (d) the name andlocation of the installation facility (if applicable) and,most importantly; (e) your address and telephonenumber.What Other Limitations Are There? ANY IMPLIEDWARRANTIES, INCLUDING WITHOUT LIMITATIONTHE IMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE, SHALL BE LIMITED TOTHE DURATION OF THIS LIMITED WARRANTY,OTHERWISE THE REPAIR, REPLACEMENT, ORREFUND AS PROVIDED UNDER THIS EXPRESSLIMITED WARRANTY IS THE EXCLUSIVEREMEDY OF THE CONSUMER, AND ISPROVIDED IN LIEU OF ALL OTHERWARRANTIES, EXPRESS OF IMPLIED. IN NOEVENT SHALL MOTOROLA BE LIABLE, WHETHERIN CONTRACT OR TORT (INCLUDINGNEGLIGENCE) FOR DAMAGES IN EXCESS OFTHE PURCHASE PRICE OF THE PRODUCT,ACCESSORY OR SOFTWARE, OR FOR ANYINDIRECT, INCIDENTAL, SPECIAL ORCONSEQUENTIAL DAMAGES OF ANY KIND, ORLOSS OF REVENUE OR PROFITS, LOSS OF
114MOTOROLA LIMITED WARRANTYBUSINESS, LOSS OF INFORMATION OR DATA,SOFTWARE OR APPLICATIONS OR OTHERFINANCIAL LOSS ARISING OUT OF OR INCONNECTION WITH THE ABILITY OR INABILITYTO USE THE PRODUCTS, ACCESSORIES ORSOFTWARE TO THE FULL EXTENT THESEDAMAGES MAY BE DISCLAIMED BY LAW.Some states and jurisdictions do not allow thelimitation or exclusion of incidental orconsequential damages, or limitation on thelength of an implied warranty, so the abovelimitations or exclusions may not apply to you.This warranty gives you specific legal rights, andyou may also have other rights that vary fromstate to state or from one jurisdiction to another.Laws in the United States and other countriespreserve for Motorola certain exclusive rights forcopyrighted Motorola software such as the exclusiverights to reproduce and distribute copies of theMotorola software. Motorola software may only becopied into, used in, and redistributed with, theProducts associated with such Motorola software. Noother use, including without limitation disassembly ofsuch Motorola software or exercise of the exclusiverights reserved for Motorola, is permitted.
115Limited WarrantyMotorola CommunicationProducts (International)Note: This Warranty applies in Singapore and thePhilippines.I. What This Warranty Coversand For How Long:MOTOROLA warrants the MOTOROLAmanufactured iDEN Communication Products listedbelow (“Product”) against defects in material andworkmanship under normal use and service for aperiod of time from the date of purchase asscheduled below:Rechargeable Batteries will be replaced during theapplicable warranty period if:a. the battery capacity falls below 80% of ratedcapacity, orb. the battery develops leakage.MOTOROLA,atitsoption,willatnochargeeitherrepair the Product (with new or reconditioned parts),replace it (with a new or reconditioned Product), orrefund the purchase price of the Product during thewarranty period provided it is returned in accordancewith the terms of this warranty. Replaced parts orboards are warranted for the balance of the originalapplicable warranty period. All replaced parts ofProduct shall become the property of MOTOROLA.This express limited warranty is extended byMOTOROLA to the original end user purchaser onlyand is not assignable or transferable to any otherparty. This is the complete warranty for the Productmanufactured by MOTOROLA. MOTOROLAassumes no obligations or liability for additions ormodifications to this warranty unless made in writingand signed by an officer of MOTOROLA. Unlessmade in a separate agreement between MOTOROLAand the original end user purchaser, MOTOROLAdoes not warrant the installation, maintenance orservice of the Product.MOTOROLA cannot be responsible in any way forany ancillary equipment not furnished byMOTOROLAwhichisattachedtoorusedinconnection with the Product, or for operation of theProduct with any ancillary equipment, and all suchiDEN Subscriber Digital Mobile andPortable Units One (1) YearProduct Accessories (manufacturedby or under license from MOTOROLA) One (1) YearBatteries One (1) Year
116Limited Warranty Motorola Communication Products (International)equipment if expressly excluded from this warranty.BecauseeachsystemwhichmayusetheProductisunique, MOTOROLA disclaims liability for range,coverage, or operation of the system as a whole, orany portion of the system not produced byMOTOROLA, under this warranty.II. General Provisions:This warranty sets forth the full extent ofMOTOROLA’S responsibilities regarding the Product,Repair, replacement or refund of the purchase price,at MOTOROLA’S options, is the exclusive remedy.THIS WARRANTY IS GIVEN IN LIEU OF ALLOTHER EXPRESS WARRANTIES. IMPLIEDWARRANTIES, INLCUDING WITHOUTLIMITATION, IMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE, ARE LIMITED TO THEDURATION OF THIS LIMITED WARRANTY TO THEFULL EXTENT SUCH MAY BE DISCLAIMED BYLAW. IN NO EVENT SHALL MOTOROLA BELIABLE FOR DAMAGES IN EXCESS OF THEPURCHASE PRICE OF THE PRODUCT, FOR ANYLOSS OF USE, LOSS OF TIME, INCONVENIENCE,COMMERCIAL LOSS, LOST PROFITS ORSAVINGS OR OTHER INCIDENTAL, SPECIAL ORCONSEQUENTIAL DAMAGES ARISING OUT OFTHE USE OR INABILITY TO USE SUCH PRODUCT,TO THE FULL EXTENT SUCH MAY BEDISCLAIMED BY LAW.III. How to Get WarrantyService:You must provide proof of purchase (bearing the dateof purchase and Product item serial number) in orderto receive warranty service and, also, deliver or sendthe Product item, transportation and insuranceprepaid, to an authorized warranty service location.Warranty service will be provided by MOTOROLAthrough one of its authorized warranty servicelocations. If you first contact the company which soldyou the Product (e.g., dealer or communicationservice provider), it can facilitate your obtainingwarranty service.IV. What This Warranty DoesNot Cover:a. Defects or damage resulting from use of theProduct in other than its normal and customarymanner.b. Defects or damage from misuse, accident, water,or neglect.c. Defects or damage from improper testing,
117operation, maintenance, installation, alteration,modification, or adjustment.d. Breakage or damage to antennas unless causeddirectly by defects in material workmanship.e. A Product subjected to unauthorized Productmodifications, disassemblies or repairs(including, without limitation, the audition to theProduct of non-MOTOROLA suppliedequipment).f. Product which has had the serial numberremoved or made illegible.g. Rechargeable batteries if:1.Any of the seals on the battery enclosure ofcells are broken or show evidence oftampering.2.The damage or defect is caused by chargingor using the battery in equipment or serviceother than the Product for which it is specified.h. Freight costs to the repair depot.i. A Product which, due to illegal or unauthorizedalteration of the software/firmware in the Product,does not function in accordance withMOTOROLA’S published specifications or thelocal type acceptance labeling in effect for theProduct at the time the Product was initiallydistributed from MOTOROLA.j. Scratches or other cosmetic damage to Productsurfaces that does not effect the operation of theProduct.k. Normal and customary wear and tear.l. Exclusion for defects or damage arising from useof the products in connection withnon-MOTOROLA equipment.VI. Patent and SoftwareProvisions:MOTOROLA will defend, at its own expense, any suitbrought against the end user purchaser to the extentthat it is based on a claim that the Product or partsinfringe a patent, and Motorola will pay those costsand damages finally awarded against the end userpurchaser in any such suit which are attributable toany such claim, but such defense and payments areconditioned on the following:a. That MOTOROLA will be notified promptly inwriting by such purchaser of any notice of suchclaim;b. That MOTOROLA will have sole control of thedefense of such suit and all negotiations for itssettlement or compromise; andc. Should the Product or parts become, or inMOTOROLA’S opinion be likely to become, thesubject of a claim of infringement of a patent, thatsuch purchaser will permit MOTOROLA, at its
118Limited Warranty Motorola Communication Products (International)option and expense, either to procure for suchpurchaser the right to continue using the Productor parts or to replace or modify the same so that itbecomes non-infringing or to grant suchpurchaser a credit for the Product or parts asdepreciated and accept its return. Thedepreciation will be an equal amount per yearover the lifetime of the Product or parts asestablished by MOTOROLA.MOTOROLA will have no liability with respect to anyclaim of patent infringement which is based upon thecombination of the Product or parts furnishedhereunder with software, apparatus or devices notfurnished by MOTOROLA, nor will MOTOROLA haveany liability for the use of ancillary equipment orsoftware not furnished by MOTOROLA which isattached to or sued in connection with the Product orany parts thereof. In no event shall MOTOROLA beliable for any incidental, special or consequentialdamages arising from any claim of patentinfringement or alleged infringement.Laws in the United States and other countriespreserve for MOTOROLA certain exclusive rights forcopyrighted MOTOROLA software, such as theexclusive rights to reproduce in copies and distributecopies of such MOTOROLA software. MOTOROLAsoftware may be used in only the Product in whichthe software was originally embodied and suchsoftware in such Product may not be replaced,copied, distributed, modified in any way, or used toproduce any derivative thereof. No other useincluding, without limitation, alteration, modification,reproduction, distribution, or reverse engineering ofsuch MOTOROLA software or exercise or rights insuch MOTOROLA software is permitted. No licenseis granted by implication, estoppel or otherwise underMOTOROLA patent rights or copyrights.
119Patent and TrademarkInformationMOTOROLA, the Stylized M Logo and all othertrademarks indicated as such herein are trademarksof Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2003Motorola, Inc. All rights reserved.Microsoft and Microsoft Internet Explorer areregistered trademarks of Microsoft Corporation.T9 is a trademark owned by Tegic Communications.T9® Text Input Patent and Trademark InformationThis product is covered by U.S. Pat. 5,818,437, U.S.Pat. 5,953,541, U.S. Pat. 6,011,554 and otherpatents pending.All other product names or services mentioned in thismanual are the property of their respective trademarkowners.Software Copyright NoticeThe Motorola products described in this manual mayinclude copyrighted Motorola and third party softwarestored in semiconductor memories or other media.Laws in the United States and other countriespreserve for Motorola and third party softwareproviders certain exclusive rights for copyrightedsoftware,suchastheexclusiverightstodistributeorreproduce the copyrighted software. Accordingly, anycopyrighted software contained in the Motorolaproducts may not be modified, reverse-engineered,distributed, or reproduced in any manner to theextent allowed by law. Furthermore, the purchase oftheMotorolaproductsshallnotbedeemedtogranteither directly or by implication, estoppel, orotherwise, any license under the copyrights, patents,or patent applications of Motorola or any third partysoftware provider, except for the normal,non-exclusive, royalty-free license to use that arisesby operation of law in the sale of a product.
120Patent and Trademark Information
121IndexNumerics2-way radio 96seealsoPrivatecalls,groupcalls, and call alerts3-way calling 72AAccessories 15safety 107Alpha mode 83BBacklight 94, 95Batterycare 5charging 4, 5cover 3inserting 4safety 106Baud rate 97CCall alerts 23deleting 24queue 23receiving 23responding 23, 24sending 23sorting 24viewing 23Call forwarding 33all calls 33missed calls 34off 33Call Timers 75Call Waiting 71off 71Calls3-way 72answering automatically 95answering with any key 95emergency 22ending 18entering number 18from Contacts 19from Datebook 21from memo 79from Recent calls 19group, see Group callsicons 18international 73making 17on hold 71phone calls 17Private calls 17, 21, 96receiving 17redialing 20, 95Speed Dial 20TTY, see TTY callsTurbo Dial 20voice name 20Circuit data 76Clock 95CompanionPro 32Contacts 19, 27capacity 31CompanionPro 32creating entries 29deleting 31editing entries 30icons 27International numbers 32
122Indexsearching 28showing all entries 28showing only Private IDs 28SIM card 27storing fast 30storingfromidlescreen30storing from Memo 30, 79storing from recent calls 25, 30type 25, 27viewing 28voice name 30with non-i205 phones 32Cover, see phone 74DDatebook 21Displaybacklight 94, 95contrast 92options 9screen 8EEmail 27, 29, 76receiving 41sending 41Emergency calls 22End key 2FFaxesreceiving 76sending 76GGPS Enabled 61almanac data 65best results 64emergency calls 22, 62map software 67privacy options 66security 66viewing location 63GPS PIN 97GPS, see GPS EnabledGroup calls 74, 96making 74off 75receiving 74HHandset, see phoneHeadset 92IIconscalls 18Contacts 27mobile originated textmessaging 46Recent calls 25status 11text entry 83Idle screen 9storingtoContacts30International numbers 73calling 73storing 32JJava applicationsdeleting 56memory 57KKeypad 2
123locking 15, 97LLanguage 95Lists, see menusMMemo 79calling from 79creating 79editing 79storingtoContacts30, 79viewing 79MemoryJava applications 57mobile originated textmessaging 47ring tones 37voice records 70Menu key 2, 10Menus 9context-sensitive 2, 10main menu 10Message notifications 39setting options 39Messages 39seealsomobileoriginatedtextmessagingreading 41receiving 39text and numeric 40Mobile originated text messaging43 creating messages 44deleting 47drafts 46icons 46memory 47outbox 46quick notes 45reading messages 44receiving messages 43sending messages 44sent messages 47setting up 43Mute 22NNavigation key 2Net alerts 41Numeric mode 85OOver-the-air programming 7PPacket data 76Passwords 97Patent information 119Pausesdialing 72storing 31Phone 1, 8active line 95cover action 74locking 96modem 76off 6on 6only 97setting up 2, 8Programming, over-the-air 7PTTOne Touch 21One Touch, setting 73PUK code 13
124IndexRRadio frequency 101Recent calls 19, 25deleting 26display time 97icons 25storingtoContacts25, 30viewing 25Redialing 20, 95Ring tones 27, 35deleting 37downloading 37memory 37off 35setting 35setting in Contacts 29, 36silent 35, 36vibrate 35, 36viewing assigned 37Ringer 91seealsoRingtonesoff 91SSafety 101accessory 107battery 106driving 109electromagnetic interference104medical devices 104radio frequency 101Security 96Service provider 15Service, activating 6Settings 94resetting 97SIM card 3, 12, 14Contacts 27inserting 14removing 14with non-i205 phones 32SIM PIN 12, 97changing 12default 12entering 12requirement 13unblocking 13Speakerphone 21Speed Dial 20, 28, 30Status messages 99Symbols mode 85TT9 Text Input, see text entryTalkgroups 8, 74, 96Text display area 9, 18Text entry 83Alpha mode 83database 83, 84icons 83mode 83Numeric mode 85Symbols mode 85Word mode 83Text messages 40Trademark information 119TTY calls 76baud rate 77making 76mode 77on 77Turbo Dial 20
125VVoice mail 39receiving 40sending calls to 17, 40setting up 8, 34, 39Voice name 20, 28creating 30Voice records 69creating 69deleting 70labelling 69locking 70memory 70playing 69Volume, setting 91, 96WWaitsdialing 72storing 31Warranty 115Word mode 83
126Index
127Quick AccessTo access the idle screen at any time:Press e.When you are entering a number using your keypad,you can access these features by pressing m:•store the number to Contacts•insert a pause•Call Setup optionsTo access My Info:1Press m.2Press #.[MORE SHORT CUTS AND TIPS HERE.]

Navigation menu