Motorola Solutions 89FT5824 i730 User Manual i730Mot

Motorola Solutions, Inc. i730 i730Mot

Contents

users manual

Download: Motorola Solutions 89FT5824 i730 User Manual i730Mot
Mirror Download [FCC.gov]Motorola Solutions 89FT5824 i730 User Manual i730Mot
Document ID337880
Application IDjC9FEQrlhdS0Ea55CGk7Vg==
Document Descriptionusers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize138.23kB (1727912 bits)
Date Submitted2003-07-07 00:00:00
Date Available2003-07-17 00:00:00
Creation Date2003-06-13 12:07:17
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2003-06-13 13:32:14
Document Titlei730Mot.book
Document CreatorFrameMaker 6.0
Document Author: eer016

Motorola
iDEN
Digital Multi-service Data-capable Phone
i730 Phone User’s Guide
THIRD DRAFT
@NNTN4760A@
NNTN4760A
Contents
Getting Started .............................................. 1
Locating Your SIM Card....................................... 3
Battery.................................................................. 3
Activating Service ................................................ 6
Powering On ........................................................ 6
Enabling Over-the-Air Security ............................ 7
Finding Your Phone Number ............................... 7
Completing Setup ................................................ 8
Phone Basics ....................................................... 8
SIM Card Security.............................................. 12
Locking the Keypad ........................................... 15
Accessories........................................................ 15
For More Information ......................................... 15
Making Calls ................................................ 17
Receiving Calls .................................................. 17
Call Icons ........................................................... 18
Entering the Number to Call............................... 18
Missed Phone Calls ........................................... 21
Using Speakerphone ......................................... 21
Using Mute......................................................... 22
Making Emergency Phone Calls ........................ 22
Call Alerts .................................................... 23
Sending Call Alerts.............................................23
Receiving Call Alerts .......................................... 23
Using the Call Alert Queue................................. 23
Recent Calls ................................................ 25
Storing Recent Calls to Contacts ....................... 25
Deleting Recent Calls.........................................26
Contacts ...................................................... 27
Viewing Contacts ............................................... 28
Creating Entries .................................................29
Storing Numbers Faster .....................................30
Editing Entries .................................................... 31
Deleting Entries.................................................. 31
Checking Capacity .............................................31
Creating Pauses and Waits................................ 31
International Numbers........................................ 32
Accessing Contacts with GSM Phones..............32
Call Forwarding........................................... 33
Forwarding All Calls ........................................... 33
Turning Off Call Forwarding ............................... 33
Forwarding Missed Calls.................................... 34
Ring Tones................................................... 35
Using the Vibrate Feature .................................. 35
Turning Ring Tones Off...................................... 35
Ring and Vibrate ................................................ 36
Assigning Ring Tones to Contacts..................... 36
Viewing Ring Tone Assignments ....................... 37
Downloading More Ring Tones.......................... 37
Managing Memory ............................................. 37
Deleting Custom Ring Tones............................. 37
Messages ..................................................... 39
Message Notifications........................................ 39
Voice Mail .......................................................... 39
Text and Numeric Messages ............................. 40
Net Alerts ........................................................... 41
Mobile Originated Text Messaging ............ 43
Setting Up .......................................................... 43
Receiving Messages.......................................... 43
Reading Messages From the Message Center . 44
Creating and Sending Messages....................... 44
Managing Memory ............................................. 47
ii
Datebook ..................................................... 49
Viewing Datebook .............................................. 49
Creating Events.................................................. 50
Editing Events .................................................... 52
Deleting Events .................................................. 52
Receiving Reminders .........................................53
Making Calls From Datebook............................. 53
Customizing Datebook Setup............................. 54
Java Applications ....................................... 55
Running Applications .........................................55
Suspending Applications.................................... 55
Resuming Applications....................................... 55
Ending Applications............................................ 56
Downloading Applications .................................. 56
Installing Applications.........................................56
Deleting Applications.......................................... 56
Managing Memory .............................................57
Shortcuts on the Main Menu ..............................57
Java Applications and GPS Enabled ................. 58
GPS Enabled ............................................... 61
IMPORTANT: Things to Keep in Mind ............... 61
Making an Emergency Call ................................ 62
Viewing Your Approximate Location.................. 63
Enhancing GPS Performance............................ 64
Updating Satellite Almanac Data ....................... 65
Setting Privacy Options...................................... 66
Using GPS with Map Software........................... 67
Voice Records ............................................. 69
Creating Voice Records..................................... 69
Playing Voice Records....................................... 69
Labelling Voice Records .................................... 69
Deleting Voice Records ..................................... 70
Locking Voice Records ...................................... 70
Managing Memory ............................................. 70
Advanced Calling Features ........................ 71
Call Waiting........................................................ 71
Switching Between Calls.................................... 71
Putting a Call on Hold ........................................ 71
Calling 2 People................................................. 72
Creating Pauses and Waits While Dialing ......... 72
Making International Calls.................................. 73
Setting One Touch PTT ..................................... 73
Setting Phone Cover Actions ............................. 74
Group Calls ........................................................74
Call Timers ......................................................... 75
Using Your Phone as a Modem ......................... 76
Making TTY Calls............................................... 76
Memo ........................................................... 79
Shortcuts ..................................................... 81
Creating a Shortcut ............................................ 81
Using a Shortcut.................................................81
Editing a Shortcut............................................... 81
Deleting Shortcuts.............................................. 82
Entering Text............................................... 83
Using Alpha Mode.............................................. 83
Using Word Mode .............................................. 83
Special Function Keys........................................ 84
Using Numeric Mode.......................................... 85
Using Symbols Mode .........................................85
Profiles......................................................... 87
Viewing Profiles.................................................. 87
Switching Profiles............................................... 87
iii
How Changing Settings Effects Profiles ............ 87
Creating Profiles ................................................ 88
Editing Profiles ................................................... 88
Temporary Profiles............................................. 89
Deleting Profiles................................................. 89
Setting Call Filtering........................................... 90
Customizing Your Phone............................ 91
Setting the Volume............................................. 91
Setting Your Phone to Not Ring......................... 91
Temporarily Turning Off Calls ............................ 91
Using a Headset ................................................ 92
Seeing the Display Better .................................. 92
Putting Your Favorites First ............................... 93
Changing the Look of Your Phone..................... 94
Using Settings.................................................... 94
Understanding Status Messages............... 99
Safety and General Information ............... 101
RF Operational Characteristics........................ 101
Portable Radio Product Operation and EME
Exposure.......................................................... 101
Electro Magnetic Interference/Compatibility .... 104
iv
Medical Devices ............................................... 104
Operational Warnings ...................................... 105
Operational Cautions ....................................... 106
Accessory Safety Information .......................... 107
Driving Safety Tips ................................... 109
MOTOROLA LIMITED WARRANTY ......... 111
Limited Warranty Motorola Communication
Products (International) ........................... 115
Patent and Trademark Information ......... 119
Index .......................................................... 121
Quick Access ............................................ 127
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i730
Model Number: H63XAN6RR4AN
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
Conforms to the following regulations:
• Increase the separation between the
equipment and receiver.
FCC Part 15, subpart B, section 15.107(a), 15.107(d)
and section 15.109(a)
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Class B Digital Device
• Consult the dealer or an experienced
radio/TV technician for help.
vi
Getting Started
volume
controls
Push-To-Talk
(PTT) button
audio jack
microphone
speaker
(in back)
microphone
accessory connector
Getting Started
Power button.
Navigation key — press the arrows to scroll
through menus and lists.
Acts like s when the phone cover is
closed; turns speakerphone on; used with
voice names and voice records.
Acts like e when the phone cover is
closed; accesses recent calls.
Selects highlighted item; places and
answers calls.
Accesses context-sensitive menus.
To start using your i730 phone:
Selects the option appearing above it on
the display.
•
•
•
•
Places phone calls.
Ends phone calls; returns to idle screen.
Make sure your SIM card is in place.
Charge the battery.
Activate your service.
Enable over-the-air security if you are prompted to.
Locating Your SIM Card
Locating Your SIM Card
Battery
Your SIM (Subscriber Identity Module) card is a small
piece of white plastic located in the SIM card holder
in the back of your phone, underneath the battery.
Removing the Back Cover
1 Make sure the phone is powered off.
2 Slide the release button back until it releases the
back cover.
SIM card
If your SIM card is not in the SIM card holder, it may
be in the box your phone came in, attached to a piece
of white plastic about the size of a credit card. If this
is the case, carefully detach your SIM card from the
surrounding plastic and insert it as described in
“Inserting Your SIM Card” on page 14.
3 Remove the back cover from the back of your
phone.
If there is no SIM card in your phone or the box,
contact your service provider.
Getting Started
Inserting the Battery
Charging the Battery
1 With the phone powered off, remove the back
cover.
2 Insert the top of the battery into the battery area.
Press the bottom of the battery to secure it.
Your phone comes with a battery charger.
1 Plug the charger into an electrical outlet.
2 Plug the other end of the charger into the
accessory connector.
3 Replace the back cover and press it gently until
you hear a click.
Tip: To remove the charger from the accessory
connector: Press the buttons on the sides of
the plug. Pull the plug straight out.
3 When charging the battery for the first time, charge
for 30 minutes longer than the time shown in
“Charging Times”.
Battery
Charging Times
See your battery and charger to determine the
appropriate charging time.
Battery
Charger
Rapid
Slim
2 Remove the battery by pushing the battery toward
the antenna and lifting it out.
Mid-Rate
2 hours
3 hours
High
2 hours
Performance
4 hours
Extra
Capacity
2.5 hours
5.5 hours
Maximum
Capacity
3.5 hours
7.5 hours
For best results, charge the batteries within the
temperature range of 50°F to 104°F (10°C to 40°C).
Prolonged charging is not recommended.
Removing the Battery
1 With the phone powered off, remove the back
cover.
Battery Use and Maintenance
• The Motorola iDEN Approved Lithium Ion chargers
provide optimum performance. Other chargers
may not fully charge the iDEN Lithium Ion battery
or may yield a reduced number of lifetime charge
cycles.
• Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge per
day.
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If long
term storage is required, store at half capacity.
Getting Started
Activating Service
The first time you power on your phone, you must be
in your local calling area. This activates your service.
As your phone connects to the network, you will see
a welcome message and a connecting message.
When the idle screen appears, the phone is ready to
use.
Powering On
The first time you power your phone on, screen may
appear asking you to update your browser
information. This means you must enable security.
Ready
To power your phone on:
Open the phone cover.
Extend the antenna.
Press p.
If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See “Entering the PIN” on page 12.
Press A under Ok.
Note: When you receive your phone, the SIM PIN
is 0000. Change your PIN to prevent
fraudulent use of the SIM card (see
“Changing the PIN” on page 12).
To power your phone off:
1 Open the phone cover.
1 Press and hold p.
2 Push down the antenna.
Enabling Over-the-Air Security
Enabling Over-the-Air Security
If you are set up to receive over-the-air programming
from your service provider, you must enable security
the first time you power on your phone or within 20
days of first activation of your phone:
1 When you power on your phone for the first time,
after the idle screen appears, you will be prompted
to select Ok to update your browser information.
Note: If you press A under Later, you will be
prompted to enable security each time you
power on your phone until you press A
under Ok.
2 Press A under Ok.
3 You are prompted to enable security. Press A
under Yes. A series of screens appears. If you
subscribe to your service provider’s plan, your
home page appears.
4 Press e to return to the idle screen.
Within 24 hours of enabling security, you will receive
a Net alert containing your Private ID and Talkgroup
lists for Private calls.
To accept programming:
1 When you receive a Net alert saying New
Browser Message - Receive Programming Info,
press O or press A under Goto.
2 You are prompted to accept changes to your lists.
Press O or press A under Ok.
3 If you are prompted again to accept changes to
your lists, press O or press A under Ok.
4 A confirmation screen displays. Press O or press
A under Ok.
5 Press e to return to the idle screen.
Finding Your Phone Number
My Info lets you view your phone number, Private ID,
and other phone information:
1 From the main menu, select My Info.
2 Scroll to see your information:
• Name — Enter your name. See “Entering Text”
on page 83.
• Line 1 and Line 2 — your phone numbers for
phone lines 1 and 2. Each is filled in when you
receive your first call on that line.
• Private — Your Private ID is the number that
others use to contact you using Private calls. It
is filled in when you receive your first Private
call.
• Group ID — the number of the Talkgroup you
have joined
• Carrier IP — the IP address assigned to your
service provider. It is filled in when you register
for packet data services.
Getting Started
• IP1 Address and IP2 Address — the IP
addresses you use to access the Internet with
your phone
• Ckt — Your circuit data number is the number
you use if you want to use your phone to
transfer circuit data. See “Using Your Phone as
a Modem” on page 76. You receive this number
from your service provider.
• Service Status — This information may be
used by your service provider if there is a
problem with your phone’s services.
To receive group calls made to a Talkgroup, you
must join the Talkgroup. You can belong to only one
Talkgroup at a time. When you join a new Talkgroup,
you no longer belong to your previous Talkgroup.
To join a Talkgroup:
1 Press #. Then enter the Talkgroup number using
the keypad. -orChoose the Talkgroup name from Contacts or the
recent calls list.
2 Press A under Join.
Completing Setup
Customizing Features
Voice Mail and Other Messages
You can control many features of your phone,
including the size of the text on the display, the way
you access main menu items, and the volume of
incoming sound, rings, and other tones. See
“Customizing Your Phone” on page 91.
To receive voice mail, you must set up an account
with your service provider. See “Messages” on page
39 for information on using voice mail.
If your service provider offers mobile originated text
messaging, see “Mobile Originated Text Messaging”
on page 43 for information on setting up and using it.
Joining a Talkgroup
Your sales representative or your service provider
creates Talkgroups for you and assigns each
Talkgroup a Talkgroup number. You can choose a
name for each of your Talkgroups when you create
entries for them in Contacts.
Phone Basics
Any time your phone is powered on, the display
provides you with information and options.
The one-line display shows a shortened version of
the full-sized display. To see more information, open
the phone cover.
Phone Basics
status icons
Ready
text area
menu icon
display options
The screen shown above is the idle screen. The text
that appears on your idle screen depends on your
service provider. The idle screen appears when your
phone is on, but not engaged in any activity.
Tip: To see a one-line idle screen when your
phone closed is closed, press ..
Text Area
This area displays menus, messages, names, phone
numbers, and other information.
Display Options
Two display options appear at the bottom of most
screens. You select a display option by pressing the
option key below it.
Menus and Lists
Your phone’s features are arranged in menus,
submenus, and lists.
To access the items in a menu or list, scroll using the
navigation key at the top of your keypad. This key lets
you scroll up, down, left, or right. Holding down the
appropriate part of the navigation key speeds up
scrolling.
In this guide, this symbol > tells you to select a menu
or list item. For example, Settings > Security
means:
1 Scroll to Settings on the main menu.
2 Press O to see the Settings screen.
3 Scroll to Security.
OK Key
Pressing O:
•
•
•
•
•
Selects the highlighted menu item or list item
Sets options
Confirms actions
Places and answer calls
Accessed the main menu from the idle screen
Getting Started
Menu Key
Many features provide context-sensitive menus that
let you access related features and actions. This icon
S appears any time a context-sensitive menu is
available. Press m to access the menu.
Main Menu
All your phone’s features can be accessed through
the main menu. You can set the main menu to
appear as a list or as large icons (see “Large Main
Menu Icons” on page 93).
a Browser
Browse the Web.
q Java
Java applications on your
phone. See “Java
Applications” on page 55.
b Settings
Display/Info
Phone Calls
2-Way Radio
Volume
Security
Advanced
Customize your phone. See
page 91.
c VoiceRecord
Record and play audio
messages. See page 69.
10
d Contacts
new contact form
list of contacts
Contacts menu
View, store, edit contacts.
See page 27.
e Messages
Voice Mail
Text Msgs
Net Alert
Access messages. See
page 39.
f Call Forward
Set call forwarding options.
See page 33.
o Datebook
new event form
Datebook menu
Schedule appointments.
See page 49.
g Memo
Store a number to access
later. See page 79.
Phone usage information.
See page 75.
Call Timers
i Recent Calls
Lists recent calls. See
list of calls
page 25.
recent calls menu
Call Setup menu
Shortcuts
Create shortcuts to screens.
See page 81.
Phone Basics
j My Info
View personal phone
information, including phone
number and Private ID. See
page 7.
p Profiles
new profile form
list of profiles
Profiles menu
Groups of setting you apply
together. See page 87.
k Call Alert
list of call alerts
Call Alerts menu
Lists call alerts. See
page 23.
l GPS
Find your approximate
geographical location. See
page 61.
Status Icons
Status icons appear at the top of the display. Some
appear at all times. Others appear only when your
phone is engaged in certain activities or when you
have activated certain features.
a b c d Battery Strength — More bars on the
e f g d battery indicate a greater charge.
m Ring Tones
Assign ring tones and turn
list of ring tones
ringer off. See page 35.
Ring Tones menu
o p q r s Signal Strength — More bars next to the
antenna indicate a stronger signal.
Phone In Use — Your phone is active on
a phone call.
Private In Use — Your phone is active on
a Private call.
Talkgroup In Use — Your phone is active
on a group call.
Active Phone Line — 1 indicates phone
line 1 is ready to make calls; 2 indicates
phone line 2 is ready to make calls.
Call Forward — Your phone is set to
forward calls. See “Call Forwarding” on
page 33.
11
Getting Started
u M Q
Ringer Off — Your phone is set not to
ring. See “Turning Ring Tones Off” on
page 35.
Messages — You have one or more
messages. See “Messages” on page 39.
Note: Except for making emergency calls, your
phone will not function without the SIM card.
To prevent unauthorized use of your phone, your SIM
card is protected by a PIN that you enter each time
the phone is powered on. You can change the PIN or
turn off the requirement that it be entered.
Entering the PIN
Internet — You are ready to browse the
internet.
You may be required to enter a SIM PIN when you
first use your phone.
Airplane Mode — Your phone is set to
airplane mode.
When you receive your phone, the SIM PIN is 0000.
Change your PIN to prevent fraudulent use of the
SIM card.
Packet Data — You are ready to transfer
packet data or are transferring packet
data. See “Using Your Phone as a
Modem” on page 76.
TTY — You are ready to use your phone
to make calls using a teletypewriter
device. See “Making TTY Calls” on page
76.
SIM Card Security
Your SIM card protects your personal information.
The SIM card stores all your Contacts information.
Since this information is stored on your SIM card, not
in your phone, you can remove the information by
removing your SIM card.
12
Important: If you enter your PIN incorrectly three
times, your SIM card is blocked. To
unblock your SIM card, you must contact
your service provider. See “Unblocking
the PIN” on page 13.
1 When the Enter SIM PIN Code screen appears,
enter your SIM PIN. An asterisk appears for each
character entered.
2 Press A under Ok.
Changing the PIN
1 From the main menu, select Settings > Security >
Change Password > SIM PIN.
SIM Card Security
2 At the Enter Old SIM PIN Code screen, enter the
current SIM PIN.
3 Press A under Ok.
4 At the Enter New SIM PIN Code screen, enter the
new 4- to 8-digit SIM PIN.
5 Press A under Ok.
6 At the Re-enter New SIM PIN Code screen,
re-enter the new SIM PIN to confirm.
7 Press A under Ok.
2 Select On or Off.
3 Enter the current SIM PIN.
4 Press A under Ok.
Unblocking the PIN
If you enter your PIN incorrectly three times, your SIM
card is blocked. To unblock your SIM card, you must
contact your service provider to get a PIN Unblock
Code (PUK).
Important: If you unsuccessfully enter the PUK code
ten times, your SIM card is permanently
blocked and must be replaced. If this
happens, all data is lost. You will get a
message to contact your service provider.
Except for making emergency calls, your
phone will not function with a blocked SIM
card.
Turning the PIN Requirement On and
Off
When the SIM PIN requirement is on, you are
prompted to enter your PIN each time you turn on
your phone.
Note: If a SIM PIN is required, your phone will not
function until the SIM PIN is entered, except
for making emergency calls.
When the PIN requirement is off, your phone can be
used without entering a PIN.
Important: When the SIM PIN requirement is off, the
personal data on your SIM card is not
protected. Anyone can use your phone
and access your personal data.
1 From the main menu, select Settings > Security >
SIM PIN.
To unblock the PIN:
Press * * 0 5s.
Enter the PUK code.
Press s.
Enter a new 4- to 8-digit SIM PIN. Press s.
Re-enter your SIM PIN. Press s.
If you entered the codes properly, SIM Unlocked
appears on the display.
13
Getting Started
Inserting and Removing Your SIM Card
Important: Do not touch the gold-colored areas of
your SIM card.
2 Hold your SIM card as shown. Do not touch the
gold-colored area.
Switching SIM Cards
Moving your SIM card from one phone to another
moves all your Contacts information, but erases other
information. If you remove your SIM card and use it
with another phone, or use another SIM card with
your phone, the following information is erased:
•
•
•
•
•
•
•
•
•
•
The recent calls list
Call forwarding settings
Net alerts
Mobile originated text messages, drafts, and quick
notes
Information stored in Memo
3 most recent GPS Enabled locations
Voice records
Voice names
Datebook events
Options set using the Personalize menu
Inserting Your SIM Card
1 With your phone powered off, remove the back
cover and battery. See “Removing the Battery” on
page 5.
14
cut corner
3 Carefully slide your SIM card to into your phone.
SIM card
holder
Removing Your SIM Card
Important: To avoid loss or damage, do not remove
your SIM card from your phone unless
absolutely necessary.
1 With your phone powered off, remove the back
cover and battery. See “Removing the Battery” on
page 5.
Locking the Keypad
2 Slide your SIM card out of the SIM card holder. Do
not touch the gold-colored area.
SIM card
holder
If you press a key while the keypad is locked,
instructions for unlocking the keypad display briefly.
To unlock the keypad:
1 From the idle screen, press m.
2 Press *.
While the keypad is locked, you can respond to
incoming calls, messages, and alerts just as you do
when the keypad is not locked.
Note: Protect your SIM card as you would any
delicate object. Store it carefully.
Locking the Keypad
Locking the phone’s keypad prevents its buttons from
being pressed. When the keypad is locked, you can
only:
• Power the phone on and off
• Unlock the keypad
• Respond to incoming calls, messages, and alerts
Important: Emergency calls cannot be placed while
the keypad is locked.
To lock the keypad:
1 From the idle screen, press m.
2 Press *.
To return to the idle screen:
Press e if the phone cover is open. -orPress . if the phone cover is closed.
The keypad remains locked.
Accessories
Your phone comes with a battery, a charger, and a
carry holster.
To order additional accessories, log on to our Web
site at www.motorola.com/store/iden or contact your
Motorola Authorized Retailer.
For More Information
If you have questions about your i730 phone, contact
your sales representative or your service provider.
15
Getting Started
16
Making Calls
Your i730 phone makes two types of calls: digital
cellular phone calls and Private calls. With Private
calls, you use your phone as a long-range, digital
walkie-talkie.
To make a phone call:
1 Enter the number you want to call.
2 To place the call:
Press s. -orIf the idle screen is displayed, press O. -orIf you used a feature that lets you enter the number
with the phone cover closed, press t.
3 To end the call:
Press e. -or-
2 Press and hold the PTT button on the side of your
phone. Begin talking after your phone emits a
chirping sound.
3 Release the PTT button to listen.
Tip: To let someone know you want to talk to him
or her on a Private call, send a call alert. See
“Call Alerts” on page 23.
Receiving Calls
When you receive a phone call, your phone rings,
vibrates, or lights up its backlight.
To answer a phone call:
If the phone cover is closed, press t. -orOpen the phone cover. -orPress s. -or-
Close the phone cover. -or-
If the idle screen is displayed, press O. -or-
If you placed the call with the phone cover closed,
press ..
Press any key on the keypad.
Note: To end a call by closing the phone cover,
you must have this action turned on. See
“Setting Phone Cover Actions” on page 74.
To make a Private call:
1 Enter the Private ID you want to call.
Press A under Yes. -orNote: To answer a call by opening the phone
cover, you must have this action turned on.
See “Setting Phone Cover Actions” on page
74.
To send a phone call to voice mail instead of
answering it:
17
Making Calls
If the phone cover is closed, press .. -or-
Press e. -or-
U Phone call ended.
Press A under No.
To end a phone call:
Press e. -orClose the phone cover. -orIf the phone cover is closed, press ..
When you receive a Private call, your phone emits a
chirping sound.
To answer a Private call:
1 Wait for the caller to finish speaking.
2 Press and hold the PTT button on the side of your
phone. Begin talking after your phone emits a
chirping sound.
3 Release the PTT button to listen.
Call Icons
When you make a phone call, call icons appear in the
text area of the phone’s display.
Placing a phone call.
Receiving a phone call.
Phone call is active.
18
Phone call is on hold.
When you miss a call, this icon appears in the text
area:
V Missed phone call.
Entering the Number to Call
To enter the number you want to call, you can:
•
•
•
•
•
•
•
•
•
Use the numbers on the keypad
Select the number from the recent calls list
Select the number from Contacts
Redial the last phone number called
Say a voice name into your phone
Use Speed Dial or Turbo Dial®
Use One Touch PTT to make a Private call
Select a number stored in Datebook
Use a TTY device — see “Making TTY Calls” on
page 76
From the Keypad
To enter the number you want to call, press the
numbers on the keypad.
Entering the Number to Call
If you make a mistake:
From Contacts
• To clear a digit, press A under Dlete.
• To clear all digits, press and hold A under Dlete.
• To insert or delete a digit anywhere in the string of
digits you have entered, scroll left or right.
• To cancel, press e.
If you have numbers stored in Contacts, you can use
these numbers to make calls. For information on
entering numbers into Contacts, see “Creating
Entries” on page 29.
From the Recent Calls List
The recent calls list stores the last 20 calls you made
or received.
With the Phone Cover Open
To select a number from the recent calls list as the
number you want to call:
1 From the idle screen, scroll down. -orFrom the main menu, select Recent Calls.
2 Scroll to the name or number you want to call.
With the Phone Cover Closed
1 Press . to display the most recent call.
2 To view the rest the recent call list, press the
volume keys on the side of your phone.
3 Display the name or number you want to call.
1 From the main menu, select Contacts.
2 Scroll to the name or number you want to call.
Tip: To find Contacts entries faster, use the keypad
to enter the first letter of the name.
3 Place the call now. -orScroll left or right to display the Contacts type for
the number you want to call.
If you are making a Private call, your phone places
the call to the Private ID stored in the Contacts entry,
even if the Private ID icon is not displayed.
If you are making a phone call:
• Your phone places the call to the phone number
assigned to the Contacts type displayed.
• If the Contacts type displayed is not a phone
number, your phone places the call to the phone
number stored in the Contacts entry.
19
Making Calls
• If the Contacts type displayed is not a phone
number and you have more than one phone
number stored in the Contacts entry, your phone
prompts you to select the phone number you want
to place the call to.
Redialing the Last Number
If you are making a phone call, the call is placed
automatically.
Tip: To stop a phone call from being completed,
press . if the cover is closed or press e.
Using Speed Dial and Turbo Dial®
Press and hold s to place a call to the last phone
number you called.
Each phone number stored in Contacts is assigned a
Speed Dial number which you can use to enter that
number.
Using a Voice Name
Turbo Dial lets you place calls to the phone numbers
associated with Speed Dial numbers 1 through 9
without entering the number.
Note: This is an optional feature. Contact your
service provider about its availability for
purchase.
Speed Dial
If you have created a voice name in Contacts for the
number you want to call, say the voice name into
your phone to enter the number. See page 28 for
information on voice names.
1 From the idle screen, use the keypad to enter the
Speed Dial number assigned to the phone number
you want to call.
2 Press #.
You can use a voice name to enter a phone number
with the phone cover open or closed.
Turbo Dial
1 Press and hold t until a prompt appears telling
you to say the voice name.
2 Speaking into the microphone, say the voice name
assigned to the number you want to call.
Your phone plays the name back to you.
If you are making a Private call, press and hold the
PTT button to place the call.
20
From the idle screen, press and hold the Speed
Dial number (1 through 9) assigned to the phone
number you want to call.
Missed Phone Calls
Using One Touch PTT
One Touch PTT sets your phone to call the most
recent Private ID on the recent calls list, or to a
Private ID you choose, every time you press the PTT
button. See “Setting One Touch PTT” on page 73.
From Datebook
If you have numbers stored as part of events in
Datebook, you can use these numbers to make calls.
For information on storing events in Datebook, see
“Datebook” on page 49.
1 From the main menu, select Datebook.
1 Select the day of the event containing the number
you want to call.
2 Place the call now. -orIf the day has more than one event with containing
numbers to call, select the event containing the
number you want to call.
For details, see “Making Calls From Datebook” on
page 53.
Missed Phone Calls
When the phone cover is closed, the one-line display
shows this icon V and the number of phone calls you
have missed.
Press ..
To display the most recent call:
Press . again.
You can now call the most recent call, or view the rest
of the recent call list. See page 19.
Using Speakerphone
Note: This is an optional feature. Contact your
service provider about its availability for
purchase.
Turning on speakerphone makes incoming sound
come out of the phone’s speaker instead of the
earpiece. Speakerphone is available whenever you
are on an active phone call.
With the Phone Cover Open
To turn speakerphone on or off:
Press A under Speaker. -orPress t.
With the Phone Cover Closed
When you make a call with the phone cover closed,
speakerphone is always on.
Opening the phone cover turns speakerphone off.
To dismiss the missed call message:
21
Making Calls
Using Mute
Muting calls lets you listen to incoming sound without
transmitting sound. Mute is available whenever you
are on an active call.
To turn mute on:
Press A under Mute.
While mute is on, Unmute appears as a display
option.
To turn mute off:
Press A under Unmute.
Making Emergency Phone Calls
Your phone supports emergency calling. Emergency
phone calls can be made even when your SIM card is
blocked or not in your phone.
Dial 911 to be connected to an emergency response
center. If you are on an active call, you must end it
before calling 911.
When you make an emergency call, your phone’s
GPS Enabled feature can help emergency service
personnel find you, if you are in a location where your
phone's GPS antenna has established a clear view of
the open sky and your local emergency response
center has the equipment to process location
information. See “GPS Enabled” on page 61, and
22
particularly “IMPORTANT: Things to Keep in Mind”
on page 61 and “Making an Emergency Call” on page
62, for more information on the limitations of this
feature. Because of the limitations of this feature,
always provide your best knowledge of your location
to the emergency response center when you make a
911 call.
Important: Emergency calls cannot be placed while
the keypad is locked.
Important: If you have not registered on the network,
emergency calls cannot be placed while
your SIM card is in your phone.
Call Alerts
Sending a call alert lets the recipient know you want
to talk to him or her on a Private call.
When you send a call alert, the recipient’s phone
emits a series of beeps and displays your name or
Private ID.
To answer a call alert:
Press the PTT button to make a Private call to the
sender.
To queue a call alert:
Press A under Queue.
To clear a call alert:
The recipient can:
Press O. -or-
• Answer — begin a Private call with the sender
• Queue — store the call alert to the call alert queue,
which is a list of call alerts
• Clear — dismiss and delete the call alert
Press A under Clear. -or-
Using the Call Alert Queue
Sending Call Alerts
When you queue a call alert, it remains in the call
alert queue until you respond to it, or delete it.
1 Enter the Private ID you want to send to, as you
would when making a Private call.
2 Press A under Alert. Ready to Alert appears on
the display.
3 Press the PTT button until Alert Successful
appears on the display.
Receiving Call Alerts
When you receive a call alert, you must answer,
queue, or clear it. You cannot receive phone calls or
Private calls until you do.
If the phone cover is closed, press ..
Viewing Call Alerts
1 From the main menu, select Call Alert.
2 Scroll through the list.
Viewing Date and Time
To view the date and time a call alert was received:
1 From the main menu, select Call Alert.
2 Select the call alert you want information on.
23
Call Alerts
Responding to Call Alerts in the Queue
After you queue a call alert, you can respond to it by
making a Private call to the sender or sending a call
alert to the sender. This call alert is then removed
from the queue.
Making a Private Call to the Sender
1 From the main menu, select Call Alert.
2 Scroll to the call alert you want to respond to.
3 Press the PTT button to begin the call.
Sending a Call Alert to the Sender
1 From the main menu, select Call Alert.
2 Scroll to the call alert you want to respond to.
3 Press A under Alert. Ready to Alert appears on
the display.
4 Press and hold the PTT button until Alert
Successful appears on the display.
Note: Answering a call alert from the recent call list
does not remove it from the call alert queue.
Deleting Call Alerts
To delete a call alert from the queue:
1 From the call alert queue, scroll to the call alert you
want to delete.
2 Press m.
24
3 Select Delete.
4 Press O or press A under Yes to confirm.
To delete all call alerts from the queue:
1 From the call alert queue, press m.
2 From the call alert menu, select Delete All.
3 Press O or press A under Yes to confirm.
Sorting Call Alerts
To sort call alerts by the order they were received:
From the main menu, select Call Alert.
Press m.
Select Sort By.
Select First on Top or Last on Top.
Recent Calls
The recent calls list stores the numbers of the 20
most recent calls you have made and received.
If the number of a recent call is stored in Contacts,
the name associated with the number appears on the
recent calls list.
An icon appears beside the name or number
indicating the Contacts type of the number used in
the call. See “Contacts” on page 27.
For phone calls, an icon appears to the left of the
name or number giving more information about the
call:
A call you made.
A call you received.
V A missed call. Missed calls appear on the
recent calls list only if you have Caller ID.
Tip: The recent calls list also stores call alerts you
have received. They appear as Private calls.
Viewing Recent Calls
With the Phone Cover Open
1 From the main menu, select Recent Calls.
2 Scroll through the list.
To get more information on a recent call:
From the recent calls list, select the call you want
information on.
This displays information such as the name
associated with the call, the number, the date, time,
and duration of the call.
With the Phone Cover Closed
1 Press . to display the most recent call.
2 To view the rest the recent call list, press the
volume keys on the side of your phone.
3 Press . to dismiss the recent calls list.
Tip: Press t to call the number displayed.
Storing Recent Calls to
Contacts
1 From the recent calls list, scroll to the number you
want to store.
2 Press A under Store. -orIf Store is not one of your options: Press m. Select
Store.
Tip: If Store is not on this menu, the number is
already stored in Contacts.
25
Recent Calls
3 To store the number as a new entry, select [New
Contact]. -orTo store the number in an existing entry, select the
entry.
4 With the Contacts type field highlighted, scroll left
or right to display the Contacts type you want to
assign the number.
5 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 29.
6 Press A under Done.
Deleting Recent Calls
To delete a call:
1 From the recent calls list, scroll to the call you want
to delete.
2 Press A under Dlete. -orIf Dlete is not one of your options: Press m. Select
Delete.
3 Press O or press A under Yes to confirm.
To delete all calls:
1 From the recent calls list, press m.
2 Select Delete All.
3 Press O or press A under Yes to confirm.
26
Contacts
Contacts stores up to 600 numbers or addresses.
Each Contacts entry can store several numbers or
addresses.
Information stored in Contacts is saved on your SIM
card. If you move your SIM card to another
SIM-based phone, you can access information stored
in Contacts from that phone.
A Contacts entry contains:
• A name — A name is required if your are storing
more than one number or address to the entry;
otherwise, it is optional. Typically, this is the name
of the person whose contact information is stored
in the entry.
• A ring tone — You can assign a ring tone to ring
when you get calls from the person whose contact
information is stored in the entry.
• A Contacts type — Each number or address stored
must be assigned a Contacts type:
Mobile
phone number
Private
Private ID
Work1
phone number
Work2
phone number
Home
phone number
Email
email address
Fax
phone number
Pager
phone number
Talkgroup
Talkgroup number
IP
IP address
Other
phone number
• A number or address — Each Contacts entry must
contain a number or address. This may be any
type of phone number, Private ID, Talkgroup
number, email address, or IP address.
Note: You can store numbers up to 64 digits long,
but every 20 digits must be separated by a
pause or wait. See “Creating Pauses and
Waits” on page 31.
27
Contacts
• A Speed Dial number — When you store a phone
number, it is assigned a Speed Dial number. You
can accept the default Speed Dial number or
change it.
• A voice name — If you create a voice name for a
number, you can then dial that number by saying
the voice name into your phone. This icon appears
P to the left of the Contacts type icon if a voice
name is assigned.
Note: This is an optional feature. Contact your
service provider about its availability for
purchase.
Viewing Contacts
To access Contacts:
From the main menu, select Contacts. -orIf you are on a call: Press m. Select Contacts.
To view entries:
1 From the Contacts list, scroll to the entry you want
to view.
2 If an entry has more than one number or address
stored, <> surrounds the Contacts type icon. Scroll
left or right to view the icon for each number stored
in the entry.
3 Press O to view the entry.
28
4 Scroll to view the other numbers and addresses
stored for the entry.
Tip: To view more entries, continue scrolling.
Searching for a Name
To search for a name in Contacts:
1 From the Contacts list, press m.
2 Select Search.
3 Enter the name you want to see. See “Entering
Text” on page 83.
4 Press O.
Your phone finds the name you entered or the
nearest match.
Showing Only Private IDs and
Talkgroups
To set Contacts to show only entries that contain
Private IDs and Talkgroup entries:
1 From the Contacts list, press m.
2 Select Filter.
3 Set this option to Show Prvt/Grp.
To set Contacts to show all entries:
1 From the Contacts list, press m.
2 Select Filter.
Creating Entries
3 Set this option to Show All.
Creating Entries
A number or address and a Contacts type are
required for all Contacts entries. Other information is
optional. You may enter the information in any order
by scrolling through the entry details.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press A under Done to save the entry to
Contacts.
To cancel a Contacts entry at any time press, e to
return to the idle screen.
To create a Contacts entry:
1 To access the entry details screen:
Select Contacts > [New Contact]. -orFrom the Contacts list, press m. Scroll to New.
2 If you want to assign a name to the entry:
Select Ringer.
Select the ring to you want to assign.
4 To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
5 To store a number or address:
Select the # field (or ID for an email address, or IP
for an IP address).
Enter the number or address. For phone numbers,
use the 10-digit format. For email addresses, see
“Entering Text” on page 83.
When you are finished, press O.
6 If you want assign more options to the number,
select [Options]. See “Assigning Options” on page
30.
7 If you want to add more numbers or addresses to
the entry:
Select Name.
Scroll past the information you already entered.
Enter the name. See “Entering Text” on page 83.
When you are finished, press O.
Enter the additional information for the entry using
step 2 through step 6. You must assign a name to
the entry, if you have not already.
Tip: Press A under Brwse to select a name
already in Contacts.
3 If you want to assign a ring tone to the name:
29
Contacts
Tip: Press A under Brwse to select a number or
address from Contacts, the recent calls list, or
Memo.
8 Press A under Done.
Assigning Options
1 If you have not already, press A under Change
with the [Options] field highlighted
2 The default Speed Dial number assigned to a
phone number is displayed in the Speed # field.
This is always the next available Speed Dial
location.
If you want to assign the phone number to a
different Speed Dial location:
With the Speed # field highlighted, press O or
press A under Change.
Press A under Dlete to delete the current Speed
Dial number.
Enter the new Speed Dial number using the
keypad.
When you are finished, press A under Ok.
3 If you want to create a voice name for a phone
number, press O.
As directed by the screen prompts, say and repeat
the name you want to assign to the number. Speak
clearly into the microphone.
30
4 When you are finished, press A under Back.
Storing Numbers Faster
To store numbers to Contacts from the recent call list,
see “Storing Recent Calls to Contacts” on page 25.
To store numbers to Contacts from Memo, see
“Memo” on page 79.
To store numbers to Contacts from the idle screen:
1 Use the keypad to enter the number you want to
store.
2 Press m.
3 Select Store Number.
4 To store the number as a new entry, select [New
Contact]. -orTo store the number in an existing entry, select the
entry.
5 With the Contacts type field highlighted, scroll left
or right to display the Contacts type you want to
assign the number.
6 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 29.
7 Press A under Done.
Editing Entries
Editing Entries
1 From the Contacts list, scroll to the entry you want
to edit.
2 Press A under Edit. -orIf Edit is not one of your options: Press m. Select
Edit.
The entry details screen displays.
3 Follow the applicable instructions in “Creating
Entries” on page 29 to edit the various fields.
Deleting Entries
Delete an Entry
1 From the Contacts list, scroll to the entry you want
to delete.
2 Press m.
3 To delete the entire entry, select Delete Contact.
4 Press O or press A under Yes to confirm.
Delete a Number or Address
1 From the Contacts list, scroll to the entry that
contains the number or address you want to
delete.
2 With the Contacts type field highlighted, scroll left
or right to display the Contacts type for the number
you want to delete.
3 Press m.
4 Select Delete Number.
5 Press O or press A under Yes to confirm.
Checking Capacity
To see how many numbers are stored in Contacts:
1 From the Contacts list, press m.
2 Select Capacity.
Creating Pauses and Waits
When storing a number, you can program your phone
to pause or wait between digits while dialing. A pause
makes your phone pause for 3 seconds before
dialing further. A wait makes your phone wait for your
response before dialing further.
This feature is useful when using voice mail or other
automated phone systems that require you to dial a
phone number and then enter an access number.
To program a pause:
Press and hold * until the letter P appears. The
P represents a 3-second pause.
31
Contacts
If you store 17035551235P1234, when you select
this number and make a call, your phone dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
If you want a pause longer than 3 seconds, press and
hold * more than once. Each P represents a
3-second pause.
To program a wait:
Press and hold * until the letter W appears. The
W means your phone waits here before dialing
further.
If you store 17035551235W1234, when you select
this number and make a call, your phone dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits. Press
A under Yes to dial the last 4 digits.
Tip: You can create pauses and waits while dialing
a number from the keypad. See “Creating
Pauses and Waits While Dialing” on page 72.
International Numbers
Note: This feature may not be offered by your
service provider.
32
When storing a number that you plan to use for
international calls, use Plus Dialing:
1 Press and hold 0 for two seconds. A “0” appears,
then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code, or area code,
and phone number.
For information about making international calls, see
“Making International Calls” on page 73.
Accessing Contacts with GSM
Phones
If you plan to use the information stored in Contacts
with an i2000, i2000plus, or any other GSM phone,
you must purchase CompanionPro. Go to
www.motorola.com/idenupdate or your service
provider’s web site for more information.
You can use CompanionPro to make the Contacts
information saved to your i730 phone’s SIM card
accessible in this type of phone.
Call Forwarding
Call forwarding sends calls to the phone numbers
you specify. You can forward all calls to one number
or forward missed calls to different numbers
depending on the reason you missed the call.
You can forward phone lines 1 and 2 independently.
Forwarding All Calls
When you set your phone to forward all calls, an icon
appears in the top row of the display:
Phone line 1 is active; calls to phone line 1 are
being forwarded.
Phone line 1 is active; calls to phone line 2 are
being forwarded.
Phone line 1 is active; calls to phone lines 1 and
2 are being forwarded.
Phone line 2 is active; calls to phone line 1 are
being forwarded.
Phone line 2 is active; calls to phone line 2 are
being forwarded.
Phone line 2 is active; calls to phone lines 1 and
2 are being forwarded.
To forward all calls:
1 From the main menu, select Call Forward > To.
If you specified a forwarding number for all calls
before, this number displays.
To forward calls to this number, press O. -orTo delete this number, press and hold A under
Dlete.
2 To enter the number you want to forward calls to:
Enter the number using your keypad. -orPress A under Srch. Select Contacts, Recent
Calls, or Memo. Enter the number from Contacts,
the recent calls list, or Memo, as you would when
making a call.
3 Press O.
All your calls are now forwarded to the number you
specified.
Turning Off Call Forwarding
If you don’t want all your calls forwarded, turn the
feature off:
1 From the main menu, select Call Forward > To.
2 Set this option to Off.
All your calls are now sent to your phone.
33
Call Forwarding
Calls you miss are forwarded according to the
options set for missed calls. By default, missed calls
are forwarded to voice mail.
Note: To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
Forwarding Missed Calls
You can specify a forwarding number for each type of
missed call:
• If Busy — Your phone is on a call or transferring
data.
• If No Answer — You do not answer on the first 4
rings.
• If Unreachable — Your phone is out of coverage
or powered off.
Note: If you want a type of missed call sent to
voice mail, the call forwarding number for
that type of missed call must be your voice
mail access number.
To forward missed calls:
1 From the main menu, select Call Forward >
Forward > Detailed.
2 Select If Busy to specify a forwarding number for
calls received when your phone is busy.
34
3 If you specified a forwarding number for this type
of call before, this number displays.
To forward calls to this number, press O and go to
step 6. -orTo delete this number, press and hold A under
Dlete.
4 To enter the number you want to forward this type
of call to:
Enter the number using your keypad. -orPress A under Srch. Select Contacts, Recent
Calls, or Memo. Enter the number from Contacts,
the Recent Calls list, or Memo, as you would when
making a call.
5 Press O.
6 Repeat step 2 through step 5 for No Answer and
If Unreachable.
7 When you are finished, press A under Back.
Ring Tones
Using the Vibrate Feature
To set the ring tone your phone makes when you
receive phone calls, message notifications, or call
alerts:
If your phone includes a vibrate feature, you can set
your phone to vibrate when you receive phone calls,
Private calls and group calls, messages notifications,
or call alerts.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll or SilentAll is set to Off.
3 Scroll through the list of ring tones and select the
one you want to assign. Vibrate sets your phone to
vibrate instead of making a sound; Silent sets your
phone to neither vibrate nor make a sound.
Tip: Highlight a ring tone to hear it.
4 Select the features you want to assign the ring
tone to.
Tip: A checkmark next to a feature means the
current ring tone has been assign to it. To
remove the assignment, select the feature.
Note: This is an optional feature. Contact your
service provider about its availability for
purchase.
Turning Ring Tones Off
You can set your phone to make no sound when you
receive phone calls, Private calls and group calls,
messages notifications, or call alerts. If your phone
includes the vibrate feature, you can set your phone
to vibrate instead of making a sound.
These icon indicate how the ringer is set.
5 When you are finished, press A under Done.
The phone never rings.
To hear the ring tone you have selected:
The phone always vibrates instead of ringing.
The phone does not ring for phone calls.
With the cover closed, press the volume controls.
These icons may appear at the same time.
35
Ring Tones
Never Ring
1 From the main menu, select Ring Tones >
SilentAll.
2 Set this option to On.
Always Vibrate Instead of Ringing
If your phone includes a vibrate feature:
1 From the main menu, select Ring Tones >
VibeAll.
2 Set this option to On.
Tip: Pressing the volume controls to turn down the
volume as far as possible sets VibeAll to On.
Do Not Ring for Some Features
To set individual ring options for phone calls,
messages notifications, or call alerts:
1 From the main menu, select Ring Tones.
2 Make sure VibeAll or SilentAll is set to Off.
3 Select Silent from the list of ring tones. -orIf your phone includes the vibrate feature, select
Vibrate from the list of ring tones.
4 Select the features you want to set to make no
sound.
5 When you are finished, press A under Done.
36
Note: To set ring options for Private calls and
group calls, see “Setting Your Phone to Not
Ring” on page 91.
Ring and Vibrate
To set a your phone to ring and vibrate when you
receive phone calls or call alerts:
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll through the list of ring tones and highlight
the one you want to assign.
4 Press m.
5 Select Assign w/Vibe.
6 Select the features you want to set to ring and
vibrate.
7 When you are finished, press A under Done.
This icon S appears on the display.
Assigning Ring Tones to
Contacts
You can set the ring tone your phone makes when
you receive phone calls or call alerts from someone
you have stored in Contacts.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll or SilentAll is set to Off.
Viewing Ring Tone Assignments
3 Scroll through the list of ring tones to the one you
want to assign.
4 Press A under Assign.
5 Select A Contact.
6 Select the Contacts entry you want to assign the
ring tone to.
Viewing Ring Tone
Assignments
From the main menu, select Ring Tones.
Highlight any ring tone.
Press m.
Select Overview.
Scroll to view ring tones assigned to features and
Contact entries.
Downloading More Ring Tones
If you want to use other ring tones, you can download
them into your phone for a fee. Go to
www.motorola.com/indenupdate for a selection of
custom ring tones and downloading instructions.
Managing Memory
To view the amount of memory available for custom
ring tones:
1 From the main menu, select Ring Tones.
2 Press m.
3 Select Memory Usage.
Deleting custom ring tones frees memory.
Note: Ring tones are stored in your phone using
the same memory space used to store voice
records (see “Voice Records” on page 69),
Deleting voice records frees memory space
for ring tones.
Deleting Custom Ring Tones
To delete a custom ring tone:
From the main menu, select Ring Tones.
Scroll to the ring tone you want to delete.
Press m.
Select Delete.
Press O or press A under Yes to confirm.
Note: Ring tones purchased from this web site
may be downloaded only once. If you delete
a ring tone from your phone, you must
purchase it again to download it again.
37
Ring Tones
38
Messages
To access your voice mail messages, text and
numeric messages, Net alerts, and any other types of
messages you are able to receive, go to the message
center:
1 From the main menu, select Messages.
2 Select the type of message you want to access.
The message center shows how many messages
you have of each type. You can listen to, read, or
delete these messages.
Message Notifications
When you receive a message, your phone notifies
you with text on the display and a notification tone or
vibration. You can access the message or dismiss
the notification.
If you dismiss the notification, the message is not
deleted. It can be accessed through the message
center.
If you are not on a phone call when you receive a
message, your phone sounds a notification tone
every 30 seconds until you access the message or
dismiss the alert.
If you are on a call when you receive a message,
your phone may sound a notification tone during the
call or after you end the call, depending on how you
set your notification options.
Setting Notification Options
To control whether your phone sounds message
notification tones while you are on phone calls:
1 From the main menu, select Settings > Phone
Calls > Notifications.
2 Select the option you want:
• Receive All — Tones sound during calls for all
types of messages.
• Msg Mail Only — Tones sound during calls for
mail messages; tones for all other types of
messages are held until you end calls.
• Delay All — Tones for all types of messages are
held until you end calls.
Tip: To set notification options during a call: Press
m. Select In Call Setup > Notifications.
Voice Mail
Note: To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
39
Messages
When you receive a voice mail message, New Voice
Mail Message appears on the display.
Press A under Call.
To dismiss the message notification:
If the phone cover is closed, press . or open the
phone cover. -orIf the phone cover is open, press O or press A
under Exit, or close the phone cover.
This icon y appears on the display, reminding you
that you have a new message.
Sending Unanswered Calls to Voice
Mail
To send a phone call to voice mail instead of
answering it:
If the phone cover is closed, press .. -orPress e. -orPress A under No.
If the caller leaves a message, this icon y appears
on the display, reminding you that you have a new
message.
40
Text and Numeric Messages
The phone’s display refers to text and numeric
messages as Text Messages.
These messages can be up to 140 letters or 64 digits
long. You can store up to 20 of these messages.
Each message is stamped with the date and time it
was left.
If your phone is powered off when you receive a
message, your phone notifies you the next time you
power it on. If you are out of your coverage area, your
phone alerts you when you return to your coverage
area.
Your phone attempts to deliver these messages for
up to 7 days.
Tip: While reading a text and numeric message
that contains a phone number, you can press
s to call that number.
Receiving a Message
When you receive a text and numeric message, New
Text Message appears on the display.
To view the message:
1 Press O or press A under Read.
2 If the message fills more than one screen, scroll to
read it.
Net Alerts
3 To keep the message, press O or press A under
Save. -orTo delete the message, press A under Dlete.
If the phone cover is closed, press . or open the
phone cover.
If the phone cover is open, press A under Exit or
close the phone cover. -or-
• Your service provider’s website
• Any email application
When you receive a Net alert, a notification appears
on the display.
If you dismiss the notification, this icon w appears on
the display, reminding you that you have a new
message.
This icon w appears on the display, reminding you
that you have a new message.
Reading from the Message Center
1 From the message center, select Text Msgs.
2 Scroll to the message you want to read.
3 If the message fills more than one screen, scroll to
read it.
4 To keep the message, press O or press A under
Save. -orTo delete the message, press A under Dlete.
Net Alerts
Note: This feature may not be offered by your
service provider.
Net alerts are text and numeric messages sent from:
• Your i730 phone
41
Messages
42
Mobile Originated Text
Messaging
With mobile originated text messaging, you can send
and receive short text messages to and from other
iDEN phones. Messages you receive appear on your
phone’s display and in the text message inbox. You
access these messages through the message center.
See “Messages” on page 39.
Note: This feature may not be offered by your
service provider.
Setting Up
Before you begin using mobile originated text
messaging, you may need to set up your signature,
service center number, and expiration information:
From the main menu, select Messages.
Scroll to Text Inbox.
Press m.
Select Text Msg Setup.
With the Signature field highlighted, press A under
Change.
Enter your signature. It may be up to 11 characters
long. See “Entering Text” on page 83. When you
are finished, press A under Ok.
6 With the Srvc Cntr No field highlighted, press A
under Change.
Enter the phone number of your service center. If
you do not know this number, contact your service
provider.
When you are finished, press A under Ok.
7 With the Expire After field highlighted, press A
under Change.
This is the amount of time messages you send are
saved if they cannot be delivered. After this period,
they are discarded.
Scroll or press A under Q to change field.
When you are finished, press A under Done.
8 Press A under Back to save the information you
entered.
Receiving Messages
When you receive a message, your phone notifies
you as it would with any other type of message. See
“Message Notifications” on page 39.
To view the message:
Press A under Read.
To dismiss the message notification:
Press A under Exit.
43
Mobile Originated Text Messaging
Reading Messages From the
Message Center
1 From the main menu, select Message > Text
Inbox.
2 Scroll to the message you want to read.
3 Press A under Read.
4 If the message fills more than one screen, scroll to
read it.
5 To keep the message, press A under Save. -orTo delete the message, press A under Dlete.
Tip: To see more choices, including replying to the
message, press m.
Your text inbox holds up to 20 messages. Each
message can be up to 160 characters long.
Creating and Sending
Messages
1 From the main menu, select Messages > [Create
Msg]. -orSelect [Create Msg] from Text Inbox, Text Outbox,
or Drafts.
2 To address the message:
44
Use the keypad to enter the phone number of the
person you want to send the message to. -orPress A under Browse. Select Contacts, Recent
Calls, or Memo. Enter the number from Contacts,
the recent calls list, or Memo, as you would when
making a call.
When you are finished, press A under Ok.
3 Enter the text of the message. See “Entering Text”
on page 83. -orTo use a quick note: Press A under Browse. Scroll
to the quick note you want. Press A under Select.
For more information on quick notes, see “Using
Quick Notes” on page 45.
If you want to add your signature: Press m. Select
Add Signature.
When you are finished, press A under Ok.
4 If you want to send the message, press A under
Yes. -orIf you want to request confirmation of delivery,
specify the type of message you want to send,
save the message as a draft, or delete the
message without sending it, press A under No.
5 If you want to request confirmation of delivery:
With the Report field highlighted, press A under
Change. Select Yes.
Creating and Sending Messages
6 If you want to specify the type of message you
want to send:
With the Send As field highlighted, press A under
Change. Scroll to the message type you want.
Press A under Select.
7 To send the message: Press s. Press A under
Yes. -orTo save the message as a draft without sending it:
Press m. Scroll to Save As Draft. Press A under
Select. -orTo delete the message without sending it: Press m.
Scroll to Dlete. Press A under Select.
Tip: In some fields, you can select an option by
scrolling left or right instead of pressing A
under Change.
Addressing Messages From the Recent
Calls List
1 From the recent calls list, scroll to the name you
want to send a message to.
2 If the entry has more than one phone number
stored, view the phone number you want to send
the message to.
3 Press m.
4 Select Compose SMS. The message is
automatically addressed to the phone number you
chose.
5 Follow step 3 through step 7 of “Creating and
Sending Messages” on page 44.
Addressing Messages From the Idle
Screen
1 Using the keypad, enter the number you want to
send a message to.
2 Press m.
3 Select Compose SMS. The message is
automatically addressed to the phone number you
chose.
4 Follow step 3 through step 7 of “Creating and
Sending Messages” on page 44.
Using Quick Notes
Quick notes are short, pre-written text messages that
you can create, edit, and send. You can store up to
20 quick notes. A quick note may be up to 30
characters long.
To create a quick note:
1 From the main menu, select Messages > Quick
Notes > [New Quick Note].
2 Press A under Create.
45
Mobile Originated Text Messaging
Enter text. See “Entering Text” on page 83. -orTo choose from pre-installed notes: Press A
under Browse. Scroll to the note you want. Press
A under Select.
3 Press A under Store.
Tip: For more options, including sending the quick
note, press m.
3 Follow step 2 through step 6 in “Creating and
Sending Messages” on page 44.
4 Scroll to Save As Draft.
Using the Outbox
Messages you have sent are stored in the outbox.
These icons appear next to messages in the outbox:
Using Drafts
Sent and confirmed.
When you save a message as a draft, it is saved in
the drafts folder. You must have a draft saved to have
a drafts folder.
Send attempted.
Forwarded.
To edit a draft:
Received by addressee.
1 From the main menu, select Messages > Drafts
Folder.
2 Press A under Change.
3 To edit the fields you want to change, follow step 2
through step 7 in “Creating and Sending
Messages” on page 44.
Not received by addressee.
Send failed.
Re-sent.
Locked.
If you have a draft saved, you can create more drafts
in the drafts folder:
Resending Messages
1 From the main menu, select Messages > Drafts
Folder > [Create Msg].
2 Press A under Create.
46
To resend a message:
1 From the main menu, select Messages > Text
Outbox.
2 Scroll to the message you want to resend.
Managing Memory
3 Press m.
4 Select Re-send.
5 Press A under Yes to confirm.
3 Press m.
4 Scroll to Lock to lock the message. -or-
Deleting Sent Messages
5 Press A under Select.
To delete a sent message:
Managing Memory
1 From the main menu, select Messages > Text
Outbox.
2 Scroll to the message you want to delete.
3 Press m.
4 Select Delete.
5 Press A under Yes to confirm.
To delete all unlocked sent messages:
1 From the main menu, select Messages > Text
Outbox.
2 Press m.
3 Select Delete All.
4 Press A under Yes to confirm.
Locking Sent Messages
When you lock a message, it cannot be deleted until
you unlock it.
1 From the main menu, select Messages > Text
Outbox.
2 Scroll to the message you want to lock or unlock.
Scroll to Unlock to unlock the message.
Your text inbox, outbox, and drafts folder have a set
amount of memory available for storing messages.
The text inbox holds 20 messages of up to 160
characters. If the text inbox is full, you cannot receive
messages until you delete some.
The outbox and drafts folder share memory space.
Together they can hold 20 messages. If the outbox
and drafts folder memory is full, you cannot send
messages or save drafts until you delete some.
To view the amount of memory available in your text
inbox:
1 From the main menu, select Messages > Text
Inbox.
2 Press m.
3 Select Memory Meter.
To view the amount of memory available in your
outbox and drafts folder:
1 From the main menu, select Messages > Text
Outbox.
47
Mobile Originated Text Messaging
2 Press m.
3 Select Memory Meter.
48
Datebook
Datebook stores up to 250 events. You can store
events over a 13 month period — 12 months after
and 1 month before the current date.
A Datebook event may contain:
• A subject — A name you assign to the event. You
can also enter a phone number, Private ID, or
Talkgroup number here. After the event is stored,
you can call this number from Datebook or when
you get a reminder of this event.
• A location — The location of the event. You can
also enter a phone number, Private ID, or
Talkgroup number here. After the event is stored,
you can call this number from Datebook or when
you get a reminder of this event.
• A date — The date automatically assigned to an
event is the date that was highlighted or selected
when you began creating the event. You can
change this date before storing the event.
• A start time — The start time automatically
assigned to an event is the beginning of the day.
You can change the start time, or assign no start
time, before storing the event.
• A duration — the length of time the event lasts
• An option to store the event as a recurring event
• A reminder — If an event has a start time, you can
set Datebook to remind you that the event is going
to start.
• An option to choose the ring tone that reminds you
that the event is going to start
• An option to switch profiles while the event is
occurring
• An option to start a Java application when the
event starts
Only the subject and date are required.
Viewing Datebook
To access Datebook:
From the main menu, select Datebook.
You can view Datebook by the day, by the week, or
by the month. You can also view the details of any
event.
In day view, brief information about each event for
that day appears.
In week view, events appear as markers
corresponding to their times.
In month view, days with events appear with a marker
in the corner.
49
Datebook
To view an event:
3 Select the date you want.
1 Select the day the event occurs.
2 Select the event.
Creating Events
To change the current view:
Every Datebook event must have a subject and be
stored to a date. Other information is optional.
1 While viewing Datebook, press m.
2 Select the view you want.
Navigating Datebook
To scroll through Datebook:
Scroll left and right using the navigation key. -orPress * or #. In week view and month view, this
is faster.
To see more in day view:
Scroll up and down using the navigation key.
To highlight a day in month view:
Enter the date using the keypad.
To go to today’s date:
1 While viewing Datebook, press m.
2 Select Go to Today.
To go to any date in Datebook:
1 While viewing Datebook, press m.
2 Select Go to Date.
50
You may enter the information in any order by
scrolling through the event details.
After you have entered the information you want, you
can press A under Done to store the event to
Datebook.
If you decide you don’t want to store the event:
Press A under Cancel.
To create a Datebook event:
1 While viewing datebook, press A under New. -orIn day view, select [New Event].
2 To assign a subject to the event:
Select Subject.
Enter the name. See “Entering Text” on page 83.
-orPress A under Brwse to choose from common
event names. -or-
Creating Events
Enter a phone number, Private ID, or Talkgroup
number. After the event is stored, you can call this
number.
When you are finished, press O.
3 If you want to assign a location to the event:
Select Location.
Enter the location. See “Entering Text” on page 83.
-orEnter a phone number, Private ID, or Talkgroup
number. After the event is stored, you can call this
number.
When you are finished, press O.
4 The start time automatically assigned to an event
is the beginning of the day. If you want to change
the start time or assign no start time:
Select Start.
Enter the start time you want. -orPress A under No Time to assign no start time.
5 If you want to assign a duration to the event:
Select Duration.
Select the duration you want. -orSelect Custom... to enter a duration.
6 The date automatically assigned to an event is the
date that was highlighted or selected when you
began creating the event. To change the date of
the event:
Select Date.
Enter the date you want.
7 If you want to make the event a recurring event:
Select Repeat.
Select the repeat cycle you want.
If the event occurs more than once a week: Select
Multiple Days. Select the days you want.
Select Done.
Select the date you want this event to stop
recurring.
8 If you want to create reminder for this event.
Select Reminder.
Select the reminder time you want. -orSelect Custom... to enter a reminder time.
9 If you have entered all the information you want for
this event, press A under Done. -orIf you want to assign a ring tone, a profile, or a
Java application to the event, see “Assigning More
Options” on page 52.
51
Datebook
Assigning More Options
Editing Events
To assign more options before storing an event:
To change the details of an event:
1 If you have created a reminder for the event and
want to set the ring tone for that reminder:
Select Ring Tone.
Select the ring tone you want from the ring tones
stored in your phone.
2 If you want to assign a profile that your phone is
switched to while the event is occurring:
Select Profiles.
Select the profile you want from the profiles stored
in your phone.
Your phone switches to this profile when the event
starts and switch back to the previous profile when
the event ends.
To copy an event to another date:
3 If you want to assign a Java application to start
when the event starts:
Select App.
Select the application you want from the Java
application stored in your phone.
If you created a reminder for this event, your
phone prompts you to start the Java application
when you get the reminder.
52
Highlight the day the event occurs.
Select the event.
Press A under Edit.
Follow the applicable instructions in “Creating
Events” on page 50 to edit the various fields.
Highlight the day the event occurs.
Select the event.
Press m.
Select Copy.
Press A under Yes to confirm.
Enter the date you want.
If you want to change more information, follow the
applicable instructions in “Creating Events” on
page 50 to edit the various fields.
Deleting Events
Select the day the event occurs.
Select the event.
Press m.
Select Delete.
If the event is a recurring event:
Receiving Reminders
Select This Event Only to delete only the event
selected in step 2.
Select Repeat Event to delete all occurrences of
the event.
Press O or press A under Yes to confirm.
Receiving Reminders
If you created a reminder for a Datebook event, when
the reminder time occurs, your phone notifies you
with text on the display and a reminder tone.
To view more details about the event:
Open the phone cover. -orPress A under View.
To dismiss the reminder:
If the phone cover is closed, press . or open the
phone cover. -orIf the phone cover is open, press O press A under
Dismiss, or close the phone cover.
Tip: You can set your phone to power on when you
receive a reminder. See “Customizing
Datebook Setup” on page 54.
For Events with Java Applications
If you assigned a Java application to start when the
event starts, you can start the application when you
get the reminder.
1 Press m.
2 Select Launch.
For Events with Numbers to Call
If you stored a phone number, Private ID, or
Talkgroup number in the Subject or Location field of
a Datebook event, you can call or send a call alert to
that number from the reminder for that event. See
step 3 on page 54.
Making Calls From Datebook
If you stored a phone number, Private ID, or
Talkgroup number in the Subject or Location field of
a Datebook event, you can call or send a call alert to
that number from Datebook.
If you have the same type of number stored in
Subject and Location, the number in Subject is
called or sent a call alert.
To make a call or send a call alert:
1 Select the day of the event containing the number
you want to call or send a call alert to.
53
Datebook
2 Go to step 3 to place the call or send the call alert
now. -orIf the day has more than one event containing
numbers to call, select the event containing the
number you want to call or send a call alert to.
3 To make a phone call:
Press s. -orPress m. Select Call # in Event.
To make a Private call or group call:
Press and hold the PTT button on the side of your
phone. -orIf you did not include a # before the Talkgroup you
want to call: Press m. Select Talkgroup.
To send a call alert:
Press m. Select Alert # in Event.
Customizing Datebook Setup
To access Datebook set up options:
1 From the main menu, select Datebook.
2 Press m.
3 Select Setup.
You can view or change these options:
54
• Start View — sets Datebook to start in day view,
month, week view, or month view when you access
Datebook.
• Day Window — sets Datebook to show a 12-hour
day or a 24-hour day in week view.
• Daily Begin — sets the beginning of your day.
This is the earliest time of day displayed in week
view, if you have a 12-hour day view.
• Reminders — Setting this option to Always sets
your phone to power itself on when you receive
reminders. To avoid draining the battery, your
phone powers itself off after a short time.
• Delete After — sets the amount of time Datebook
waits to delete an event after is occurs.
• Time Shift — lets you shift the times of all
Datebook events. This is useful if you are travelling
to a different time zone.
• Alert Timeout — sets the amount of time a tone
continues to sound when you receive a message
notification, call alert, or Datebook reminder.
• Clock — controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
Java Applications
Your phone arrives with Java applications installed
and ready to run. You can download and install more
Java applications.
You can make a Java application easy to run by
creating a shortcut to it on the main menu.
Note: Using Java applications may cause your
phone to use up more battery power than
other uses of your phone.
Running Applications
To run an application that has a shortcut on the main
menu:
1 From the main menu, select the application or
suite of applications you want to run.
2 If you have selected a suite of applications: Press
O or press A under Open. Select the application
you want to run.
3 Press O.
To run an application that does not have a shortcut
on the main menu:
1 From the main menu, select Java.
2 Select the application or suite of applications you
want to run.
3 If you have selected a suite of applications: Press
O or press A under Open. Select the application
you want to run.
4 Press O.
Suspending Applications
When you suspend an application, it does not stop
running. It goes to the background so that you can
run another application in the foreground.
To suspend an application:
Press e or close the phone cover.
To view your suspended applications:
From the Java menu, select Suspended Apps.
You can have up to 3 applications running at one
time — 1 running in the foreground and 2 in the
background.
Resuming Applications
You can resume a suspended application at any
time. This brings it to the foreground.
1 From the Java menu, select Suspended Apps.
2 Select the application you want to resume.
3 Press O.
55
Java Applications
Ending Applications
1 From the main menu, select Java.
2 Scroll to the application you want to end.
3 Press A under End.
2 Select the application or suite of applications you
want to install.
3 Press O.
4 If you want to create a shortcut to the Java
application on the main menu: Press A under
Next. Press A under Yes. Press A under Add.
To end all applications:
Deleting Applications
To delete an application:
To end an application:
From the main menu, select Java.
Press m.
Select End All.
If you want to end all applications without letting
them exit, press A under EndNow.
Tip: You can also end applications from the
Suspended Apps screen.
Downloading Applications
If you want to run more Java applications, you can
download them into your phone. Go to
www.motorola.com/indenupdate for a selection of
Java applications and downloading instructions.
Installing Applications
Before running most application you have
downloaded, you must install them.
1 From the main menu, select Java.
56
From the main menu, select Java.
Select the application you want to delete.
Press m.
Select Deinstall.
Press O or press A under Yes to confirm.
When your phone has finished deleting the
application, press A under Finish.
To delete all Java applications:
From the main menu, select Java.
Select the application you want to delete.
Press m.
Select Delete All.
Press O or press A under Yes to confirm.
When your phone has finished deleting the
application, press A under Finish.
Managing Memory
Managing Memory
To create a shortcut to an application that is already
installed:
To view the amount of memory available for Java
applications:
1 From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps. -or-
From the main menu, select Java.
Select Java System.
Press A under Next.
To see more memory information, press A under
Next again.
Deleting Java applications frees memory.
Note: Java application data is stored in your phone
using the same memory space used to store
voice records (see “Voice Records” on page
69), ring tones (see ““Ring Tones” on page
35), and wallpaper images (see “Wallpaper”
on page 94). Deleting some of these other
items frees memory space for Java
applications.
Shortcuts on the Main Menu
When you install an application, you can create a
shortcut to the application on the main menu.
From the main menu: Press m. Select
Add/Remove Apps.
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to create a
shortcut for.
4 Press A under Add.
To remove a shortcut:
1 From the main menu, select Settings >
Personalize > Menu Options >Add/Remove
Apps. -orFrom the main menu: Press m. Select
Add/Remove Apps.
1 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
2 Scroll to the application you want to remove the
shortcut for.
3 Press A under Remove.
57
Java Applications
Java Applications and GPS
Enabled
Some Java applications can make use of your
phone’s GPS feature to determine the approximate
geographical location of your phone. (See “GPS
Enabled” on page 61 for more information on the
GPS feature.) However, for privacy reasons, you may
not always want Java applications to access the
location of your phone. Your phone protects your
privacy by giving you the option to block all or some
Java applications from accessing the location of your
phone.
Setting Privacy for All Java
Applications
These options control the privacy of all Java
applications on your phone:
• Restricted — No Java or similar software
applications may access the location of your
phone. However, location information may still be
available to the phone’s owner, fleet manager, or
account administrator.
• Unrestricted — All Java applications may access
the location of your phone, without notifying you.
58
• By Permission — When a Java application
attempts to access the location of your phone, you
are prompted to give permission. However,
location information may still be available to the
phone’s owner, fleet manager, or account
administrator.
See “Setting Privacy Options” on page 66 for
information on choosing these options.
Granting or Denying Permission
If you choose By Permission, you must grant or
deny each Java application access to the location of
your phone when the application requests access for
the first time. You may be required to grant or deny
subsequent requests from the same application,
depending on the privacy setting you choose for the
individual Java application (see “Setting Privacy for
Each Java Application” on page 59).
When a Java application requests access the
location of your phone, a screen appears informing
you.
To deny this request:
1 Press A under Deny. The application does not
access the location of your phone.
2 Select the denying option you want:
Java Applications and GPS Enabled
• Always — If the application requests access to
the location of your phone again, the request is
denied without notifying you.
• For this session — If the application requests
access to the location of your phone again
before you power off your phone, the request is
denied without notifying you.
• Only Once — If the application requests access
to the location of your phone again, you are
prompted to grant or deny permission.
To grant this request:
1 Press A under Grant. The application accesses
your phone’s location.
2 Select the granting option you want:
• Always — If the application requests access to
the location of your phone again, the request is
granted without notifying you.
• For this session — If the application requests
access to the location of your phone again
before you power off your phone, the request is
granted without notifying you.
• Only Once — If the application requests access
to the location of your phone again, you are
prompted to grant or deny permission.
Setting Privacy for Each Java
Application
After a given Java application requests access to the
location of your phone for the first time, you have the
opportunity to set GPS privacy option for that Java
application.
1 From the main menu, select Java.
2 Select the application or suite of applications you
want to set the privacy option for.
If the application has requested access to the
location of your phone, m appears when you
highlight the application.
3 Press m.
4 Select Privacy Settings.
5 Select the privacy option you want for this
application:
• Always — The application always has
permission to access the location of your phone,
without notifying you.
• Ask — When the application requests access to
the location of your phone, you are prompted to
grant or deny permission (see “Granting or
Denying Permission” on page 58).
• Never — When the application requests access
to the location of your phone, the request is
denied without notifying you.
59
Java Applications
60
GPS Enabled
Your phone’s GPS Enabled feature uses information
from Global Positioning System (GPS) satellites
orbiting the Earth to determine the approximate
geographical location of your phone, expressed as
latitude and longitude. The availability and accuracy
of this location information (and the amount of time
that it takes to calculate it) will vary depending on the
environment in which you are using the GPS feature.
For example, GPS location fixes are often difficult to
obtain indoors, in covered locations, between high
buildings, or in other situations where you have not
established a clear broad view of the sky. SEE:
“IMPORTANT: Things to Keep in Mind” on page
61.
When you make a 911 emergency call, the GPS
feature of your phone can help emergency personnel
locate you if your phone has adequate access to
GPS satellite signals and your emergency response
center is equipped to process such information.
You can also use the GPS feature to view your
approximate location. Location information appears
on the phone’s display.
Java applications loaded on your phone can also
request your location. If your phone is connected to a
laptop computer or similar device, software running
on that device can request your location. To protect
your privacy, you can control whether these requests
are granted.
IMPORTANT: Things to Keep in
Mind
If you are using the GPS feature of your phone while
driving, please give full attention to driving and to the
road.
Where adequate signals from multiple satellites
are not available (usually because your GPS
antenna cannot establish a view of a wide area of
open sky), the GPS feature of your phone WILL
NOT WORK. Such situations include but are not
limited to:
• In underground locations
• Inside of buildings, trains, or other covered
vehicles
• Under any other metal or concrete roof or
structure
• Between tall buildings or under dense
tree-cover
• Near a powerful radio or television tower
61
GPS Enabled
• When your GPS antenna is covered (for
example, by your hand or other object) or
facing the ground
• In temperature extremes outside the operating
limits of your phone
Walking or driving very slowly may also
substantially reduce GPS performance.
Even where location information can be
calculated in such situations, it may take much
longer to do so, and your location estimate may
not be as accurate. Therefore, in any 911 call,
always report the location to the emergency
response center if you can and if you cannot,
remain on your phone for as long as the
emergency response center instructs you.
Even where adequate signals from multiple
satellites are available, your GPS feature will only
provide an approximate location, often within 150
feet (45 meters) but sometimes much further from
your actual location. Advice on how to improve
GPS performance is provided in “Enhancing GPS
Performance” on page 64.
While the GPS feature of your phone can be a
valuable navigational aid, it does not replace the
need for careful navigating and good judgment.
Never rely solely on one device for navigation.
Remember that the accuracy of the location
62
information and the time needed to obtain it will vary
depending on circumstances, particularly the ability
to receive signals from adequate numbers of
satellites.
On emergency calls, your phone uses assistance
information from the phone network to improve the
speed and accuracy of your phone’s location
calculation: if such assistance information becomes
unavailable, it may reduce the speed and accuracy of
the location calculation.
The satellites used by the GPS feature of your phone
are controlled by the U.S. government and are
subject to changes implemented in accordance with
the Department of Defense GPS user policy and the
Federal Radionavigation Plan. These changes may
affect the performance of the GPS feature of your
phone.
Making an Emergency Call
Dial 911 to be connected to an emergency response
center. If you are on an active call, you must end it
before calling 911.
When you make an emergency 911 call, the GPS
feature of your phone begins to seek information to
calculate your approximate location. It will take the
GPS feature of your phone some time to
determine your approximate location. Even where
your phone has good access to sufficient GPS
Viewing Your Approximate Location
satellite signals and network assist data, it may take
30 seconds or more to determine the approximate
location. This time will increase where there is
reduced access to satellite signals. When your
approximate location is determined, it is made
available to the appropriate emergency response
center.
In some cases, your local 911 emergency
response center may not be equipped to receive
GPS location information. For this reason, and
because the GPS location information reported is
only approximate or may not be available in your
location (see “IMPORTANT: Things to Keep in Mind”
on page 61), always report your location to the
911 operator you speak to when making an
emergency call, if able, just as you would when using
a phone without GPS capabilities.
Note: If you are concerned about whether your
local 911 emergency response center is
equipped to receive GPS location
information, contact your local authorities.
In general, if your phone has access to signals from
more GPS satellites, your location will be determined
faster and more accurately than if your phone has
access to signals from fewer GPS satellites.
If your phone does not have adequate access to GPS
satellites signals, the location of the nearest cell
tower in contact with your phone is automatically
made available to the emergency response center, if
the center has the capability to receive such
information.
See “Enhancing GPS Performance” on page 64 for
information on how to help your phone determine
your location.
Viewing Your Approximate
Location
1 From the main menu, select GPS > Position.
2 Scroll to view the entire screen.
This displays the following information about the last
time your location was calculated:
• The time (as Greenwich Mean Time) and date that
the location was last calculated
• The approximate location, expressed as latitude
and longitude
• The estimated accuracy of the calculated location.
This estimate of accuracy is only a very rough
estimate and may vary substantially from the
actual accuracy of the approximate location
information reported.
63
GPS Enabled
• The number of satellites used to calculate the
location. In general, more satellites make for better
accuracy.
To calculate your location again:
Press A under Rfrsh.
It may take your phone several minutes to complete
the process of determining your location. During this
time, a message usually appears on your phone’s
display saying your phone is scanning for satellites.
For tips on getting the best location calculation, see
“Enhancing GPS Performance” on page 64.
The Position screen displays the updated
information.
To cancel a location calculation before it is
completed:
Press A under Cancel to return to the Position
screen. -orPress e to return to the idle screen.
Each time approximate location of your phone is
calculated, the latest location information is stored in
your phone and remains there even when your phone
is powered off. You will see this information the next
time you view the Position screen.
64
If you received a phone call or alert while attempting
to determine your location, the Position screen will
disappear, but your phone will continue attempting to
determine its location. If it is successful, the new
location information will be displayed the next time
you view the Position screen.
Enhancing GPS Performance
Sometimes the GPS feature of your phone may be
unable to complete a location calculation
successfully. If this happens when you are making an
emergency call, the location of the nearest cell tower
in contact with your phone is made available to the
appropriate emergency response center if the center
has the capability to receive such information. If this
happens when you are trying to view your location on
the phone’s display, you will see a message
indicating that your phone cannot access satellites.
To improve accuracy and increase your chances of a
successful calculation, do the following while your
phone is determining your approximate location:
• Stay in the open. The GPS feature works best
where there is nothing between your phone and a
large amount of open sky. If possible, go outside,
away from tall buildings and foliage. While
performance in a building is improved by moving
closer to windows, glass with certain sun shielding
films may block satellite signals.
Updating Satellite Almanac Data
• Hold your phone to enhance reception. Signals
from GPS satellites are transmitted to your GPS
antenna, which is inside the back of your phone,
opposite the earpiece. Hold your phone away from
your body, giving the antenna clear access to
satellite signals. Do not cover the antenna area
with your fingers or anything else.
GPS antenna area
• In a car. When using the GPS Enabled feature in a
car, position your phone so that the GPS antenna
has good access to GPS signals through the car’s
windows. Typically, the GPS antenna has best
access to GPS signals in a car when placed near a
window.
Note: Although moving your phone at a walking
pace decreases GPS performance, moving
it at the speed of a moving car does not.
• Stay in network coverage. Depending on who your
service provider is, the network will provide your
phone with information that helps determine your
location more quickly and accurately.
Updating Satellite Almanac
Data
Another way to keep the GPS feature of your phone
working well is to keep your satellite almanac data up
to date.
• Stand still. If possible, stand still until your phone is
finished determining your location. Moving your
phone at a walking pace while your phone is
calculating your approximate location may
substantially decrease GPS performance.
The United States government maintains an almanac
of data about where GPS satellites are as they orbit
the Earth. This information is available to your phone.
Keeping your satellite almanac up to date helps your
phone determine your location more quickly.
65
GPS Enabled
The almanac contains information about the location
of satellites, their operational status, and other
satellite information. Keeping this information
updated enhances the performance of your GPS
feature. In most cases, your phone will be able to get
a fix in strong satellite signal conditions with outdated
almanac data, but it may take longer.
Note: When you make an emergency call, your
phone does not rely upon the almanac to
determine your location.
If your satellite almanac data is out of date, your
phone may prompt you to update it. Follow the
instructions that appear on the phone’s display. You
may be asked to go to a web site or call a customer
care number.
Setting Privacy Options
Your phone’s GPS privacy options control whether
Java applications on your phone or other software
applications may view the location of your phone.You
may set your phone to one of these GPS privacy
options.
Note: Privacy options do not apply to the
transmission of location information during
emergency 911 calls.
To set your GPS privacy options:
1 From the main menu, select GPS > Privacy.
66
2 If your GPS PIN security feature is enabled, enter
your GPS PIN. (See “Setting the GPS PIN Security
Feature” on page 66 for more information.)
3 Select the privacy option you want:
• Restricted — No Java or similar software
applications may view the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
• Unrestricted — All applications may view the
location of your phone, without notifying you.
• By Permission — When an application
attempts to view the location of your phone, you
will be prompted to give permission. However,
location information may still be available to the
phone’s owner, fleet manager, or account
administrator.
Setting the GPS PIN Security Feature
To prevent your GPS privacy settings from being
altered without your knowledge, your GPS privacy
option can be protected by a PIN.
When you receive your phone, the GPS security
feature is turned off, so you do not have to enter a
GPS PIN to access your GPS privacy options. If you
turn this feature on, you will be required to enter a
GPS PIN to access your GPS privacy options.
Using GPS with Map Software
To turn the GPS Enabled security feature on or off:
1 From the main menu, select Settings > Security >
GPS PIN.
2 Select On or Off.
3 Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
4 Press A under Ok.
To change your GPS PIN:
1 From the main menu, select Settings > Security >
Change Password > GPS PIN.
2 Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
Press A under Ok.
Enter the new 4- to 8-digit GPS PIN.
Press A under Ok.
Enter the new 4- to 8-digit GPS PIN to confirm.
Press A under Ok.
Using GPS with Map Software
You can use the GPS feature of your phone to
provide approximate location data to a laptop
computer or similar device that is running interactive
map software such as that made by DeLorme or
Microsoft. This way, if your phone has good access to
GPS signals, your approximate position on a map
can be made available as you travel in a vehicle.
To do this, connect your phone to your laptop (or
other device) with a data cable and set your phone to
transmit data (see “Getting Started” on page 68).
Your phone then provides your approximate location
to the device running the map software, which
displays your location on a map. Your phone
provides an updated location every second and the
map software displays your changing location on its
map.
See “Enhancing GPS Performance” on page 64 for
more details on obtaining good location information.
Note: Because your phone is continuously
determining your location, using the GPS
feature of your phone with map software
uses the phone’s battery power quickly.
67
GPS Enabled
Software Compatibility
Your phone sends location information to your laptop
or other device using the standard National Marine
Electronics Association (NMEA) format. Your phone
supports output messages in NMEA-0183 format and
supports the following NMEA-0183 sentences: GGA,
GLL, GSA, GSV, RMC, and VTG.
The map software running on your laptop or other
device must support NMEA 3.0.
Getting Started
To connect your phone to your laptop or other device:
1 With the phone’s display facing up, insert the data
cable’s connector into the accessory connector,
until you hear a click.
2 Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM port
selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
•
•
•
•
•
Bits per second: 4800
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Hardware
To set your phone to send location information to
your laptop or other device:
1 From the main menu, select GPS > Interface.
2 Set NMEA OUT to On.
Your phone is now sending location data to your
laptop or other device.
To stop your phone from sending location data to
your laptop or other device:
Set NMEA OUT to Off.
Each time you power your phone on, NMEA OUT is
automatically set to Off.
68
Voice Records
Note: This is an optional feature. Contact your
service provider about its availability for
purchase.
A voice record is a recording you make with your
phone and can play back. You can record notes to
yourself or phone calls.
Your phone can store up to 20 voice records.
Creating Voice Records
To record a note to yourself:
1 From the main menu, select VoiceRecord > [New
VoiceRec].
2 Say the message you want to record into the
microphone.
Tip: To stop recording before you are finished,
press A under Pause. To start recording
again, press A under Rsume.
3 When you are finished recording, press O.
To add to the end of voice record:
From the main menu, select VoiceRecord.
Select the voice record you want to add to.
Press m.
Select Add To.
5 When you are finished recording, press O.
To record a phone call:
1 While on an active call, press m.
2 Select VoiceRecord.
3 When you are finished recording, press O.
Note: Recording of phone calls is subject to
applicable laws regarding privacy and
recording of phone conversations.
Playing Voice Records
1 From the main menu, select VoiceRecord.
2 Select the voice record you want to play.
3 To stop the voice record while it is playing, press
O.
Tip: To fast forward, scroll right. To rewind, scroll
left. To pause or resume, press any key.
Labelling Voice Records
When you create a voice record, it is labeled with the
time and date it was recorded. You can then rename
it with a custom label.
1 From the main menu, select VoiceRecord.
2 Select the voice record you want to label.
3 Press A under Label.
69
Voice Records
4 Enter the label you want to assign. See “Entering
Text” on page 83.
5 Press O.
Deleting Voice Records
3 Select Lock to lock the message. -orSelect Unlock to unlock the message.
When a voice record is locked, this icon R appears
next to it.
To delete a voice record:
Managing Memory
1 From the main menu, select VoiceRecord.
2 Scroll to the unlocked voice record you want to
delete.
3 Press m.
4 Select Delete.
5 Press O or A under Yes to confirm.
To view the amount of memory available for voice
records:
1 From the main menu, select VoiceRecord.
2 Press m.
3 Select Memory.
To delete all voice records:
To free more memory by deleting all unlocked voice
records:
From the main menu, select VoiceRecord.
Scroll to any voice record.
Press m.
Select Delete All.
Press O or A under Yes to confirm.
Locking Voice Records
When you lock a message, it cannot be deleted until
you unlock it.
1 From the main menu, select VoiceRecord.
2 Select the voice record you want to lock or unlock.
70
From the main menu, select VoiceRecord.
Press m.
Select Memory.
Select Delete.
Press O or A under Yes to confirm.
Note: Voice records are stored in your phone
using the same memory space used to store
ring tones (see “Ring Tones” on page 35),
Deleting ring tones frees memory space for
voice records.
Advanced Calling
Features
Call Waiting
Call Waiting lets you receive a second call while on
an active call. Call Waiting is always available, unless
you turn it off for a specific call.
If you are on a call and receive a second call, your
phone emits a tone and displays a message saying
you are receiving a second call.
To accept the second call and put the active call on
hold:
Press A under Yes.
To accept the second call and end the active call:
1 Press e.
Your phone rings with the second call.
2 Answer the second call.
To decline the second call:
Press A under No. If you subscribe to voice mail,
the call is forwarded to your voice mail box.
Turn Off Call Waiting
To turn off Call Waiting during a call:
1 Press m.
2 Select In Call Setup > Call Waiting.
3 Set this option to Off.
Tip: To turn Call Waiting back on while still on the
call, set this option to On.
To turn off Call Waiting for the next call you make or
receive:
1 From the main menu, select Settings > Phone
Calls > Call Waiting.
2 Set this option to Off.
Call Waiting is turned back on when you end the call.
Switching Between Calls
Any time you have one call active and one call on
hold, to make the call on hold active and put the
active call on hold:
Press A under Switch.
Putting a Call on Hold
1 While on an active call, press m.
2 Select Hold.
71
Advanced Calling Features
If you want to make the call active again, press A
under Resume.
4 Enter the second phone number you want to call.
Tip: For quick ways to enter the number, press m.
Calling 2 People
5 Press O or press s to place the call.
6 Press A under Join.
Putting a Call on Hold, Making a
Second Call
Place or receive a phone call.
While the call is active, press m.
Select 2nd Call. This puts the call on hold.
Enter the second phone number you want to call.
Tip: For quick ways to enter the number, press m.
5 Press O or press s to place the call.
To end the second call and make the call on hold
active again:
Press e.
To make the call on hold active and put the active call
on hold:
Press A under Switch.
Making a 3-Way Call
1 Place or receive a phone call.
2 While the call is active, press m.
3 Select 3 Way. This puts the call on hold.
72
All 3 people in the call can speak to and hear each
other.
Merging 2 Calls into a 3-Way Call
You can combine 2 phone calls into a 3-way call any
time you have a call on hold and a call active:
1 Press m.
2 Select Join.
All 3 people in the call can speak to and hear each
other.
Creating Pauses and Waits
While Dialing
You can enter a pause or wait while dialing a number.
For more information on pauses and waits, see
“Creating Pauses and Waits” on page 31.
To create a pause while dialing a phone number:
1 From the keypad, enter the digits you want to
occur before the pause.
2 Press m.
Making International Calls
3 Select Insert Pause.
4 Enter the digits you want to occur after the pause.
To create a wait while dialing a phone number:
1 From the keypad, enter the digits you want to
occur before the wait.
2 Press m.
3 Select Insert Wait.
4 Enter the digits you want to occur after the wait.
Making International Calls
Note: This feature may not be offered by your
service provider.
Plus Dialing lets you place an international call to
most countries without entering the local international
access code.
Setting One Touch PTT
One Touch PTT sets your phone to call the most
recent Private ID on the recent calls list, or to a
Private ID you choose, every time you press the PTT
button.
To set your phone to call the most recent Private ID
on the recent calls list:
1 From the main menu, select Settings > 2-Way
Radio > One Touch PTT.
2 Set this option to Last Call.
To set your phone to call a Private ID you choose:
1 From the main menu, select Settings > 2-Way
Radio > One Touch PTT > Assign Number.
2 To enter the number you want your phone to call
every time you press the PTT button:
1 Press and hold 0 for two seconds. A “0” appears,
then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
Press A under Srch. Select Contacts, Recent
Calls, or Memo. Enter the number from Contacts,
the recent calls list, or Memo, as you would when
making a call.
2 Enter the country code, city code, or area code,
and phone number.
Tip: If you are entering a Talkgroup number, enter
# before the number.
Enter the number using your keypad. -or-
73
Advanced Calling Features
To turn off One Touch PTT:
Set Flip to End to Off in step 2.
1 From the main menu, select Settings > 2-Way
Radio > One Touch PTT.
2 Set this option to Off.
Note: If you are using your phone with a headset,
and you have the Flip to End option set to
On, closing your phone cover sends
incoming sound to the headset and does not
end the call.
Setting Phone Cover Actions
For Answering Calls
Group Calls
To set your phone to answer calls when you open the
phone cover:
A group call is a Private call made to all members of a
Talkgroup at once. A Talkgroup is a group of Private
IDs.
1 From the main menu, select Settings > Phone
Calls > Flip Activation > Flip to Ans.
2 Set this option to On.
To set your phone not to answer calls when you open
the phone cover:
Set Flip to Ans to Off in step 2.
For Ending Calls
To set your phone to end calls when you close the
phone cover:
1 From the main menu, select Settings > Phone
Calls > Flip Activation > Flip to End.
2 Set this option to On.
To set your phone not to answer calls when you open
the phone cover:
74
To receive group calls made to a Talkgroup, you
must join the Talkgroup. See “Joining a Talkgroup”
on page 8.
Making Group Calls
1 Press #. Then enter the Talkgroup number using
the keypad. -orChoose the Talkgroup name from Contacts or
recent calls list.
2 Proceed as if making a Private call.
Receiving Group Calls
To answer a group call:
Proceed as if answering a Private call. Only one
person at a time may speak on a group call.
Call Timers
Turning off Group Calls
To control whether you hear group calls to your
Talkgroup:
1 From the main menu, select Settings > 2-Way
Radio > Tkgrp Silent.
2 Set this option On.
To set your phone to let you receive group calls to
your Talkgroup:
Set Talkgroup Silent to Off in step 2.
Call Timers
Call timers measure the duration of your phone calls,
Private or group calls, and circuit data use, as well as
the number of Kilobytes sent and received by your
phone:
• Last Call — displays the duration of your most
recent phone call.
• Phone Reset — keeps a running total of your
phone call minutes, until you reset it.
• Phone Lifetime — displays the total minutes of all
your phone calls.
• Prvt/Grp Reset — keeps a running total of all of
your Private and group call minutes, until you reset
it.
• Prvt/Grp Lifetime — displays the total minutes of
all your Private and group calls.
• Circuit Reset — keeps a running total of all of
your circuit data use, until you reset it.
• Circuit Lifetime — displays the total minutes of all
of your circuit data use.
• Kbytes Reset — keeps a running total of the
number of Kilobytes sent and received by your
phone, until you reset it.
To view or reset a timer:
1 From the main menu, select Call Timers.
2 To view a feature without resetting: Press O when
you are finished viewing. -orTo reset a feature: Press A under Reset. Press O
or press A under Yes to confirm.
Note: The values displayed by Call Timers should
not be used for billing. Call timers are
estimates only.
75
Advanced Calling Features
Using Your Phone as a Modem
Note: This feature may not be offered by your
service provider.
To use your phone as a modem with a laptop,
handheld device, or desktop computer:
1 With the phone’s display facing up, insert a data
cable’s connector into the accessory connector,
until you hear a click.
• Packet data — used for small file transfers such as
email
To use these services, you must install the iDEN
Wireless Data Services software (available
separately). For more information on setting up your
computer and your i730 phone for packet and circuit
data calls, see the Wireless Data Services User’s
Guide or contact your service provider.
Making TTY Calls
Note: This feature may not be offered by your
service provider.
To use your phone to make phone calls using a
teletypewriter (TTY) device:
2 Insert the data plug into the COM port of the other
device.
1 Connect one end of a 2.5mm cable into the audio
jack on your phone. Connect the other end of the
cable to your TTY device.
2 Make sure that your phone’s TTY feature is on and
select the TTY mode you want to use.
3 Use your phone to enter phone numbers and make
calls.
When used as a modem, your phone has these data
transfer modes:
When you make a TTY call, these icons appear on
the phone’s display:
• Circuit data — used for sending and receiving
faxes and for transferring large files
Phone call is active.
Phone call is on hold.
76
Making TTY Calls
TTY device features such as Turbo-Code,
High-Speed, and Interruption are not supported by
your phone. These features must be turned off or
disabled to use your TTY device with your phone.
Turning On the TTY Feature
Your phone’s TTY feature must be on if you want to
make TTY calls, set the TTY mode, or change the
TTY baud rate. To make sure the TTY feature is on:
From the main menu, select Settings > Phone
Calls > TTY > Use TTY. This field must say On.
Choosing a Mode
Your phone supports these TTY modes:
• TTY — You type and read text on your TTY device.
• VCO (Voice-Carry-Over) — You speak into your
phone and read text replies on your TTY device.
• HCO (Hearing-Carry-Over) — You type text on
your TTY device and listen to voice replies on your
phone speaker.
To change mode while not in a call:
1 From the main menu, select Settings > Phone
Calls > TTY > Type.
2 Select the TTY mode you want.
When you make a TTY call, the call begins in the TTY
mode you last selected.
To change mode during a call using your phone:
1 Press m.
2 Select In Call Setup > TTY > Type.
3 Select the mode you want.
To change mode during a call using your TTY device,
issue one of the following commands:
• “VCO please” — to select VCO mode
• “HCO please” — to select HCO mode
• “HCO off please” — to turn off HCO mode
Important: When you are using HCO, the sound
coming from your phone speaker may be
uncomfortably loud. Use caution when
putting the phone to your ear. (For
information on setting the volume of your
phone speaker, see “Setting the Volume”
on page 91.)
Changing the TTY Baud Rate
By default, your phone’s TTY baud rate is set to
45.45, the baud rate required for TTY calls within the
U.S. To make calls outside the U.S., set your TTY
baud rate to 50.0.
To change the TTY baud rate:
1 From the main menu, select Settings > Phone
Calls > TTY > Baud.
77
Advanced Calling Features
2 Select the baud rate for your location.
78
Memo
Memo lets you store a number, make a call to that
number, and save it to Contacts.
To create a memo:
1 From the main menu, select Memo.
2 Enter the number using your keypad.
3 Press O.
To view the memo later:
1 From the main menu, select Memo.
To delete the memo:
1 From the main menu, select Memo.
2 Press and hold A under Dlete.
2 Press m.
3 Select Store to Cntcts.
4 To store the number as a new entry, select [New
Contact]. -orTo store the number in an existing entry, select the
entry.
5 With the Contacts type field highlighted, scroll left
or right to display the Contacts type you want to
assign the number.
6 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 29.
7 Press A under Done.
To edit the memo:
1 From the main menu, select Memo.
2 Enter the new number.
3 Press O.
To make a call to the memo number:
1 From the main menu, select Memo.
2 Press s.
To store the memo number to Contacts:
1 From the main menu, select Memo.
79
Memo
80
Shortcuts
Using a Shortcut
Shortcuts lets you access most menu options by
pressing a number on your keypad or saying the
voice name of the shortcut. You create the shortcut
and then use it to take you to that screen any time.
If you know the shortcut number:
Creating a Shortcut
If you do not know the shortcut number:
1 Go to the menu item you want to create a shortcut
for.
1 From the main menu, select Shortcuts.
2 Select the shortcut you want to use.
For example, if you want to create a shortcut to the
screen for creating a new Contacts entry: From the
main menu, select Contacts > [New Contacts].
2 Press and hold m until a confirmation screen
appears.
3 Press O or press A under Yes.
4 A screen appears showing the number assigned to
the shortcut. If you want to change the number
assigned: Press A under Edit. Enter the number
you want to assign. Press O.
5 If you want to record a voice name for the shortcut:
Select Voice. As directed by the screen prompts,
say and repeat the name you want to assign to the
number. Speak clearly into the microphone.
6 Press A under Done.
1 From the idle screen, press m.
2 On your keypad, press the number assigned to the
shortcut.
If you assigned a voice name to the shortcut:
1 Press t.
2 Say the voice name into your phone.
Editing a Shortcut
To change the number assigned to a shortcut:
From the main menu, select Shortcuts.
Press m.
Select Reorder.
Select the shortcut you want to move.
Press A under Grab.
Scroll to the place where you want the shortcut to
appear.
7 Press A under Insert.
81
Shortcuts
8 Repeat step 4 through step 7 for all the items you
want to move.
9 Press A under Done.
To change the name or number assigned to a
shortcut:
1 From the main menu, select Shortcuts.
2 Press m.
3 Press A under Edit.
Deleting Shortcuts
To delete a shortcut:
From the main menu, select Shortcuts.
Scroll to the shortcut you want to delete.
Press m.
Select Delete.
To delete all shortcuts:
1 From the main menu, select Shortcuts.
2 Press m.
3 Select Delete.
82
Entering Text
Using Alpha Mode
You can enter text into your phone using the
traditional method of pressing a key several times for
each character, or by pressing a key once for each
letter while words likely to be the one you want are
chosen from a database. You can also enter symbols
and numbers into a text field.
In screens that require you to enter text, you see the
following icons. These icons tell you which text input
mode you are using:
• Press any key on the keypad to enter the letters,
numbers, and symbols on that key. For example,
to enter the letter Y, press 9 three times.
• Type a letter then scroll up to make that letter
uppercase, or type a letter then scroll down to
make that letter lowercase.
• See “Special Function Keys” on page 84 for more
information on adding spaces, capitalization, and
punctuation.
l Alpha — Press a key several times for each
Using Word Mode
character.
j Word — Press a key once for each letter while
words likely to be the one you want are chosen
from a database.
i Symbols — Enter punctuation and other
symbols.
k Numeric — Enter numbers.
When you access a screen that requires you to enter
text, you start in the mode last used.
To choose a text input mode:
1 At a screen that requires you to enter text, press m.
2 Select the text input mode you want to use.
In Word mode, T9 Text Input analyzes the letters on
the keypad button you press and arranges them to
create words. As you type, T9 Text Input matches
your keystrokes to words in its database and displays
the most commonly used matching word. You can
add you own words to this database.
Entering a Word
1 Select Word as your text input mode.
2 Type a word by pressing one key for each letter.
For example, to type “test” press 8 3 7 8.
The displayed word may change as you type it. Do
not try to correct the word as you go. Type to the
end of the word before editing.
83
Entering Text
3 If the word that appears is not the desired word,
press 0 to change the word on the display to the
next most likely word in the database.
Repeat until the desired word appears.
If the desired word does not appear, you can add it to
the database.
Adding Words to the Database
Select Alpha as your text input mode.
Type the word using Alpha mode.
Select Word as your text input mode.
Press #.
The word you typed in Alpha text entry mode is now
in the database.
Note: You cannot store alphanumeric
combinations, such as Y2K.
Choosing a Language
To change the language of the database:
1 At a screen that requires you to enter text, press m.
2 Select Languages.
3 Select the language you want for your database.
Special Function Keys
Some of the phone’s keys assume different functions
while in Alpha or Word mode.
Spaces
Press # for a space.
Capitalization
Press and hold # to make the next letter typed
uppercase (shift), to make all subsequent letters
typed uppercase (caps lock), or to go back to
lowercase letters.
These icons appear in the top row of your display:
m Shift is on.
n Caps lock is on.
When neither of these icons appear, letters typed are
lowercase.
Note: Your phone automatically makes the first
letter of a sentence uppercase.
Punctuation
Press 1 to insert punctuation. One of eight basic
punctuation symbols will be inserted (. , - ? ! ’ @ :)
84
Using Numeric Mode
Press 0 to change the inserted punctuation symbol
to another of the eight basic punctuation symbols.
Note: Additional punctuation symbols are available
in Symbols mode.
Using Numeric Mode
1 Select Numeric as your text input mode.
2 Press the number buttons on your keypad to enter
numbers.
Using Symbols Mode
1 Select Symbols as your text input mode.
A row of 32 symbols appears along the bottom of
the phone’s display. Scroll right to view the
complete row.
2 Press O to select the highlighted symbol.
85
Entering Text
86
Profiles
Viewing Profiles
A profile is a group of settings saved together so that
you can apply to your phone easily.
To view the profiles stored in your phone:
A profile contains these settings:
• Ring Tones — sets all options described in “Ring
Tones” on page 35, except assigning ring tones to
Contacts.
• Display/Info — sets Wallpaper, Color Palette,
Text Size, and Backlight options. See
“Display/Info Features” on page 95.
• Phone Calls — sets Set Line and Auto Ans
options. See “Phone Calls Features” on page 95.
• Volume — sets all options described in “Volume
Features” on page 96.
• Call Filter — controls which calls, call alerts, and
message notifications your phone responds to.
See “Setting Call Filtering” on page 90.
• Advanced — sets headset option. See “Using a
Headset” on page 92.
Your phone arrives with pre-set profiles. You can also
create your own profiles.
1 From the main menu, select Profiles.
2 Select the profile you want to view.
Tip: The profile that is currently in effect on your
phone has a checkmark next to it.
3 Press A under View.
4 Scroll and select settings to view their values.
Switching Profiles
To apply a profile to your phone:
1 Form the main menu, select Profiles.
2 Scroll to the profile you want to apply.
3 Press O.
The profile you selected is now in effect.
How Changing Settings Effects
Profiles
Many of the settings contained in profiles can be set
without switching or editing profiles — for example,
by selecting Settings or Ring Tones to set options,
or by setting the volume of the phone’s ring using the
volume controls.
87
Profiles
When you do this, your phone either:
• Updates the profile in effect to reflect these
changes, without notifying you -or• Creates a temporary profile that contains these
changes
Note: This feature may not be offered by your
service provider.
To set your phone to create a temporary profile that
contains changes you make to settings:
From the main menu, select Profiles.
Press m.
Select Setup > Temp. Settings.
Set this option to On.
To set your phone to update the profile in effect to
reflect any changes you make to settings:
Set Temp. Settings to Off in step 4.
If your service provider does not offer the Temp.
Settings option, your phone always updates the
profile in effect to reflect the changes you make to
settings.
For more information on temporary profiles, see
“Temporary Profiles” on page 89.
88
Creating Profiles
1 From the main menu, select Profiles.
2 Select [New Profile]. -orScroll to any profile. Press m. Select New.
3 Enter the name you want to give the profile. See
“Entering Text” on page 83.
When you are finished, press O.
4 If you want to base this profile on an existing
profile: Select Copy from. Select the profile you
want to base this profile on.
5 Press A under Create.
6 Scroll the list of options and set their values.
7 Press A under Done.
Editing Profiles
From the main menu, select Profiles.
Scroll to the profile you want to edit.
Press m.
Select Edit.
Follow the applicable instructions in “Creating
Profiles” on page 88 to edit the various fields.
Temporary Profiles
Temporary Profiles
If your phone is set to create temporary profiles, a
temporary profile is created when you make changes
to settings without switching or editing profiles. See
“How Changing Settings Effects Profiles” on page 87.
A temporary profile is based on the profile in effect
when you made the changes, but reflects the
changed settings. Making more changes further
updates the temporary profile, for as long as it is in
effect.
A temporary profile stays in effect until you switch
profiles, power off your phone, or delete it (or the
profile it is based on) from the list of profiles.
If you do not store a temporary profile, it is deleted
when you switch profiles or power off your phone.
A temporary profile is automatically given the same
name as the profile it is based on, but with an asterisk
in front of it.
When you view a temporary profile’s settings, the
options that differ from the profile it is based on have
an asterisk in front of them.
Storing a Temporary Profile
To store a temporary profile as a new profile:
1 From the main menu, select Profiles.
Scroll to the temporary profile.
Press m.
Select Store As New.
Enter the name you want to give the profile. See
“Entering Text” on page 83.
When you are finished, press O.
To overwrite the profile that temporary profile is
based on:
From the main menu, select Profiles.
Scroll to the temporary profile.
Press m.
Select Store Changes.
The temporary profile is stored with the name of the
profile it is based on. The profile it is based on, as it
existed before you made changes to settings, is
gone.
Deleting Profiles
To delete a profile:
1 From the main menu, select Profiles.
2 Select the profile you want to delete.
Note: A temporary profile is automatically deleted
when the profile it is based on is deleted.
3 Press m.
89
Profiles
4 Select Delete.
5 Press O or press A under Yes to confirm.
To delete all profiles:
From the main menu, select Profiles.
Press m.
Select Delete All.
Press O or press A under Yes to confirm.
Setting Call Filtering
The call filtering setting in each profile lets you control
which calls, call alerts, and message notifications
your phone notifies you of, and which it ignores.
To set call filtering:
1 While setting options for a profile, select Call
Filter.
2 To set filtering options for phone calls, select
Phone.
• Off sets your phone to notify you of all phone
calls.
• All sets your phone to ignore all phone calls.
• All Contacts sets your phone to notify you only
of phone calls from numbers stored in Contacts.
• Some Contacts sets your phone to notify you
only of phone calls from numbers you select
from Contacts.
90
3 If you set the Phone option to Some Contacts,
select up to 5 Contacts entries that contain phone
numbers you want to be notified of calls from.
When you are finished, press A under Done.
4 To set filtering options for Private calls and group
calls, select Prvt/Grp.
• Off sets your phone to notify you of all Private
calls and group calls.
• On sets your phone to ignore all Private calls
and group calls.
5 To set filtering options for call alerts, select Alerts.
• Off sets your phone to notify you of all call
alerts.
• On sets your phone to ignore all call alerts.
6 To set filtering options for message notifications,
select Notifications.
• Off sets your phone notify you of all messages.
• On sets your phone not to sound a tone or
vibrate when you receive a message. The
messages notification screen appears as usual.
7 Press A under Done.
Customizing Your Phone
Setting the Volume
To set the volume of the sound coming from the
phone’s earpiece or speaker:
1 From the main menu, select Settings > Volume.
2 Select Earpiece to set the earpiece volume. -orSelect Speaker to set the speaker volume.
3 To set the volume:
Scroll left or right. -orPress the volume keys on the side of your phone.
4 Press O.
To set the volume of the phone’s ring:
Press the volume controls.
For another way to set the volume of the phone’s
ring, or the volume of many other sounds your phone
makes:
1 From the main menu, select Settings > Volume.
2 Scroll to the option you want and make the
change. Choose Line 1 or Line 2 to set the volume
of the phone’s ring when you get a call on that line.
Setting Your Phone to Not Ring
To set your phone to make no sound when you
receive phone calls, Private calls, group calls,
message notifications, and call alerts, see “Turning
Ring Tones Off” on page 35.
To set your phone to vibrate instead of making a
sound when you receive Private calls and group
calls, even if you want your phone to ring for other
features:
1 From the main menu, select Settings > 2-Way
Radio > Alert Type.
Tip: If Alert Type does not appear: From the main
menu, select Ring Tones. Make sure Vibe All
is set to Off. Repeat step 1.
2 Select Vibrate to set your phone to vibrate. -orSelect Silent to set your phone to neither vibrate
nor make a sound.
Temporarily Turning Off Calls
Sometimes you may want to have your phone on, but
turn off its ability to make and receive calls, such as
when you are on an airplane.
See “Volume Features” on page 96.
91
Customizing Your Phone
To set your phone so that it can not make or receive
phone calls, Private calls, or group calls, or transfer
data:
1 From the main menu, select Settings > Advanced
> Service.
2 Set this option to Off.
To restore your phone ability to do all these things:
Set this option to On.
Using a Headset
If you use a headset or similar device with your
phone, you can set your phone to send incoming
sound to the headset only, or to the headset and the
speaker at the same time:
1 From the main menu, select Settings > Advanced
> Headset/Spkr.
2 Select HdsetOnly to send incoming sound to the
headset only. -orSelect Hdset&Spkr to send incoming sound to the
headset and the speaker at the same time.
Note: If you are using your phone with a headset,
and you have the Flip to End option set to
On, closing your phone cover sends
incoming sound to the headset and does not
end the call. See “Setting Phone Cover
Actions” on page 74.
92
Seeing the Display Better
Setting Contrast
To set the contrast of the display:
1 From the main menu, select Settings >
Display/Info > Contrast.
2 To set the contrast of the full-sized display, select
Int. Display. -orTo set the contrast of the one-line display, select
Ext. Display.
3 Scroll left or right to set the contrast.
Setting Text Size
To set the size of the text on the full-size display:
1 From the main menu, select Settings >
Display/Info > Text Size.
2 Select the option you want:
• Standard — 14 characters per line
• Compressed — 18 characters per line
• Zoom — 11 characters per line
To set your phone to briefly display very large digits
when you enter numbers at the idle screen:
1 From the main menu, select Settings >
Display/Info > Large Dialing.
Putting Your Favorites First
2 Set this option to Large Digits.
Putting Your Favorites First
Large Main Menu Icons
Several features let you make the items you use the
most easy to access.
To make the items on your main menu appear as
large icons:
1 From the main menu, select Settings >
Display/Info > Menu View. -orFrom the main menu: Press m. Select Menu View.
2 Set this option to View Icons.
Setting the Backlight
A backlight lights the display and keypad when you
make or receive a call, open or close the phone
cover, or press keys or buttons.
To control how long the backlight stays on:
1 From the main menu, select Settings >
Display/Info > Backlight > Backlight.
2 Select the number of seconds you want the
backlight to stay on. -orSelect Off if you never want the backlight on. -orTo set the keypad backlight to light up only in low light
conditions:
1 From the main menu, select Settings >
Display/Info > Backlight > Sensor.
2 Set this option to On.
Setting the Order of the Main Menu
To change the order of the items on the main menu:
1 From the main menu, select Settings >
Personalize > Menu Options > Reorder Menu.
2 Select the item you want to move.
3 Press A under Grab.
4 Scroll to the place where you want the item to
appear.
5 Press A under Insert.
6 Repeat step 2 through step 5 for all the items you
want to move.
7 Press A under Done.
Note: The More option can not be moved.
Assigning Main Menu Items to Keys
You can assign a main menu item to each of the four
parts of the navigation key, to O, and to the left and
right A. You can access these main menu item from
the idle screen by pressing the key it is assigned to.
1 From the main menu, select Settings >
Personalize.
93
Customizing Your Phone
2 Select the option for the key you want to assign a
main menu item to.
3 Select the main menu item you want to assign.
Changing the Look of Your
Phone
Setting an Item to Start at Power Up
Wallpaper
To set a main menu item to be the first thing you see
when you power up your phone:
To change the wallpaper that appears on the idle
screen:
1 From the main menu, select Settings >
Personalize > Power Up.
2 Select the main menu item you want.
1 From the main menu, select Settings >
Display/Info > Wallpaper.
2 Scroll to the wallpaper you want.
3 If you want to see what the wallpaper looks like,
press A under View.
4 Press O.
To set the idle screen to be the first thing you see
when you power up your phone:
Select Default Ready in step 2.
Java Applications on the Main Menu
For information on making shortcuts to Java
applications stored on your phone into main menu
items, see “Shortcuts on the Main Menu” on page 57.
Shortcuts to Other Menus
For information on creating shortcuts to other menus
and screens, see “Shortcuts” on page 81.
Colors
To change the color scheme of the display:
1 From the main menu, select Settings >
Display/Info > Palette.
2 Select the color palette you want.
Using Settings
Settings contains many submenus that let you
customize your phone.
For information on applying groups of setting to your
phone together, see “Profiles” on page 87.
94
Using Settings
Display/Info Features
Phone Calls Features
The Display/Info menu controls how the keypad and
display appear:
The Phone Calls menu controls how your phone
handles phone calls:
• Wallpaper — See “Wallpaper” on page 94.
• Palette — See “Colors” on page 94.
• Text Size — sets size of text on the display. See
“Setting Text Size” on page 92.
• Home Icons — controls whether main menu icons
appear on the idle screen.
• Backlight — See “Setting the Backlight” on page
93.
• Clock — controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
• Menu View — See “Large Main Menu Icons” on
page 93.
• Large Dialing —Sets large digits to appear on the
idle screen when you enter a number. See “Setting
Text Size” on page 92.
• Contrast — See “Setting Contrast” on page 92.
• Language — sets the language that your phone
displays.
• Set Line — sets phone line 1 or phone line 2 as
the active line for outgoing calls.
• Any Key Ans — If this feature is on, you can
answer calls by pressing any key on the keypad.
• Auto Redial — sets your phone to automatically
redial calls you make when the system is busy.
• Call Waiting — See “Call Waiting” on page 71.
• Auto Ans — sets your phone to automatically
answer an incoming call after a specified number
of rings. When this feature is on, the phone
answers by connecting you to the caller; it does
not send the call to voice mail, unless you are out
of coverage or on the line.
• Flip Activation — See “Setting Phone Cover
Actions” on page 74.
• Minute Beep — causes a beep to sound every
minute of an active call.
• Call Duration — causes the duration of a call to
appear on the display when the call ends.
• TTY — See “Making TTY Calls” on page 76.
• Notifications — See “Setting Notification Options”
on page 39.
95
Customizing Your Phone
• Java App Control — If you have installed a Java
application that answers phone calls, this setting
lets you turn that application on.
2-Way Radio Features
The 2-Way Radio menu controls how your phone
handles Private calls and group calls:
• Tkgrp Silent — controls whether you hear group
calls to your Talkgroup. See “Receiving Group
Calls” on page 74.
• Tkgrp Area — lets you name Talkgroups and
choose your Talkgroup area.
• One Touch PTT — See “Setting One Touch PTT”
on page 73.
• Alert Type — sets your phone to make no sound
when you receive Private calls and group calls.
See page 91.
Personalize Features
The Personalize menu makes main menu items
easier to access. See “Putting Your Favorites First”
on page 93.
Volume Features
The Volume menu sets the volume of sounds your
phone makes:
• Line 1 — sets ringer volume for phone line 1.
96
• Line 2 — sets ringer volume for phone line 2.
• Messages — sets the volume of message
notifications and Datebook reminders.
• Earpiece — sets the volume of sound coming out
of the earpiece.
• Speaker — sets the volume of sound coming out
of the speaker.
• Keypad — sets the volume of sound associated
with pressing keys and buttons.
• Java Earpiece — sets the volume of sound
associated with Java applications coming out of
the earpiece.
• Java Speaker —sets the volume of sound
associated with Java applications coming out of
the speakers.
• Data — sets the volume of sounds that notify you
that you are receiving a circuit data call.
Security Features
The Security menu lets you turn security features on
and off and change passwords:
• Phone Lock — turns on a feature that locks your
phone, either immediately or automatically after a
set period of inactivity. An unlock code is required
to enable this feature, to unlock the phone, and to
set a new Unlock code. Contact your service
provider for your default unlock code.
Using Settings
• Keypad Lock — locks the phone’s keypad, either
immediately or automatically after a set period of
inactivity. See “Locking the Keypad” on page 15 for
more information on locking and unlocking the
keypad.
• SIM PIN — enables and disables your phone’s
SIM PIN security feature. See “Turning the PIN
Requirement On and Off” on page 13.
• GPS PIN — enables and disables your phone’s
GPS PIN security feature. See “Setting the GPS
PIN Security Feature” on page 66.
• Change Passwords — changes your phone
unlock code, security code SIM PIN, and GPS PIN.
Advanced Features
• Reset Defaults — Reset Settings returns all
settings to their original defaults; Reset All returns
all settings to their original defaults and erases all
stored lists. Use only under the direction of your
service provider.
• Return to Home — controls how long the recent
calls list displays after calls.
• Service — See “Temporarily Turning Off Calls” on
page 91.
• Phone Only — prevents your phone from making
or receiving Private calls or group calls. or
transferring data.
• Baud Rate — sets the baud rate at which your
phone communicates with a laptop computer, PC,
or similar device.
The Advanced menu contains advanced and rarely
used Settings features.
• Alert Timeout — sets the amount of time a tone
continues to sound when you receive a message
notification, call alert, or Datebook reminder.
• Headset/Spker — See “Using a Headset” on page
92.
• Connectivity — Network ID sets the phone’s
network IDs and their roaming options under the
direction of your service provider; Master Reset
lets your service provider reset your service in the
event of a security or provisioning problem.
97
Customizing Your Phone
98
Understanding Status
Messages
You may receive status messages under certain
conditions. Before contacting your service provider,
note the message, numeric code, and the conditions
under which it appeared. The following table lists and
describes the status messages.
Note: When your phone cover is closed, the
one-line display screen shows a shortened
version the status messages displayed in
the full-size screen. To see complete status
messages, open the phone cover.
Status
Messages
(one-line
display)
Status
Messages
(full-screen
display)
Message Description
Failed
Please Try
Later
This service is temporarily
not available. Please try
again later.
Busy in Prvt. Not Available
The phone that you called
is busy in a Private call.
Busy in Data User Busy in
Data
The phone that you called
is busy transfering data.
Restricted
Service
Restricted
This service was restricted
by your service provider, or
this service was not
purchased.
Not Avail.
Service Not
Available
This feature is not available
on the current network.
Status
Messages
(one-line
display)
Status
Messages
(full-screen
display)
Message Description
Not in Srvc.
Number Not in
Service
The number that you
entered is not valid.
System
Busy
System Busy
The system is experiencing
heavy traffic. Please try
again later.
Not Avail.
User Not
Available
The phone that you called
is either busy, out of
coverage, or turned off.
Please try again later.
Failed
Service
Conflict
This service cannot be
enabled because an
incompatible service has
already been turned on.
Not Avail.
User Not
Authorized
The person that you called
has not purchased this
service.
Try Again
Please Try
Again
An error occurred. Please
try again.
99
Understanding Status Messages
Status
Messages
(one-line
display)
Status
Messages
(full-screen
display)
Message Description
Status
Messages
(one-line
display)
Self Check
Self Check
Error + Number
Code
A fault was detected with
your phone. If this error
recurs, note the error code
and contact Customer
Care.
No message. Wrong PIN
You have entered an
incorrect PIN number.
No message. Wrong Code
Your phone will not accept
a non-Nextel SIM card.
Enter PIN
Enter PIN
Please enter your 4- to 8digit SIM PIN code.
Unit Lock
Enter Unlock
Code
Auto Phone Lock is
activated. Enter you unlock
code.
Self Check
Self Check Fail An operational fault was
+ Number Code detected with your phone.
Note the numeric code,
turn your phone off, and
contact Customer Care.
PIN Blocked PIN Blocked
Call Your
Provider
The incorrect PIN was
entered three consecutive
times. You will be unable to
place or receive calls on
your phone. Contact Nextel
Customer Care to have
them obtain the PIN
Unblocking Key (PUK)
code.
Insert SIM
Insert SIM
Your SIM Card is not being
detected. Please check to
ensure that you have
inserted the SIM Card.
Check SIM
Check SIM
Card
Please check your SIM
Card to make sure it has
been inserted properly.
100
Status
Messages
(full-screen
display)
Low Memory New Browser
Message
Memory Full!
Message Description
Warns of low memory for
Net Alerts.
Safety and General
Information
Portable Radio Product
Operation and EME Exposure
• United States Federal Communications
Commission, Code of Federal Regulations; 47
CFR part 2 sub-part J.
• American National Standards Institute (ANSI) /
Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1992.
• Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1999 Edition.
• International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1998.
• Ministry of Health (Canada). Safety Code 6. Limits
of Human Exposure to Radiofrequency
Electromagnetic Fields in the Frequency Range
from 3 kHz to 300 GHz, 1999.
• Australian Communications Authority
Radiocommunications (Electromagnetic Radiation
- Human Exposure) Standard 2001.
• ANATEL, Brasil Regulatory Authority, Resolution
256 (April 11, 2001) “additional requirements for
SMR, cellular and PCS product certification.”
Your Motorola radio product is designed to comply
with the following national and international
standards and guidelines regarding exposure of
human beings to radio frequency electromagnetic
energy (EME):
To assure optimal radio product performance and
make sure human exposure to radio frequency
electromagnetic energy is within the guidelines
set forth in the above standards, always adhere
to the following procedures:
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING YOUR
INTEGRATED MULTI-SERVICE PORTABLE
RADIO.
RF Operational Characteristics
Your radio product contains a radio frequency
transmitter to convey the information you wish to
send as well as occasional automatic signals used to
sustain connection to the wireless network, and a
receiver which enables you to receive communication
and connection information from the network.
101
Safety and General Information
When placing or receiving a phone call, hold your
radio product as you would a wireline telephone.
Speak directly into the microphone.
• Phone or Two-way radio mode: one inch (2.5
cm)
• Data operation using any data feature with or
without an accessory cable: one inch (2.5 cm)
Two-way radio operation
Antenna Care
When using your radio product as a
traditional two-way radio, hold the
radio product in a vertical position
with the microphone one to two
inches (2.5 to 5 cm) away from the lips.
Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the
radio product and may violate FCC regulations.
Phone Operation
Body-worn operation
To maintain compliance with FCC RF exposure
guidelines, if you wear a radio product on your body
when transmitting, always place the radio product in
a Motorola approved clip, holder, holster, case or
body harness for this product. Use of
non-Motorola-approved accessories may exceed
FCC RF exposure guidelines. If you do not use a
Motorola approved body-worn accessory and are
not using the radio product in the intended use
positions along side the head in the phone mode
or in front of the face in the two-way radio mode,
then ensure the antenna and the radio product
are kept the following minimum distances from
the body when transmitting
102
DO NOT hold the antenna when the radio product
is “IN USE”. Holding the antenna affects call quality
and may cause the radio product to operate at a
higher power level than needed.
Approved Accessories
For a list of approved Motorola accessories call
1-800-453-0920, or visit our website at
www.mot.com/iden.
Portable Radio Product Operation and EME Exposure
ALL MODELS WITH FCC ID AZ489FT5824 MEET THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO
RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radiofrequency (RF) energy set by the
Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards
that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and
health.
The exposure standard for wireless mobile phones employs
a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.1
Tests for SAR are conducted using standard operating
positions reviewed by the FCC with the phone transmitting at
its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that is does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the
body) as required by the FCC for each model. The highest
SAR value for this model phone when tested for use at the
ear is 1.163 W/kg and when tested on the body, as described
in this user guide, is 1.15 W/kg during packet data
transmission. (Body-worn measurements differ among phone
models, depending upon available accessories and FCC
requirements.)2
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC and
can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
AZ489FT5824.
Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com.
In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional protection for
the public and to account for any variations in
measurements.
2 The SAR information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty
range for this product.
103
Safety and General Information
Electro Magnetic
Interference/Compatibility
Note: Nearly every electronic device is
susceptible to electromagnetic
interference (EMI) if inadequately
shielded, designed or otherwise
configured for electromagnetic
compatibility.
Medical Devices
Pacemakers
The Advanced Medical Technology Association
(AdvaMed) recommends that a minimum separation
of 6 inches (15 cm) be maintained between a
handheld wireless radio product and a pacemaker.
These recommendations are consistent with those of
the U.S. Food and Drug Administration.
Facilities
Persons with pacemakers should:
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your radio product in
any facility where posted notices instruct you to do
so. Hospitals or health care facilities may be using
equipment that is sensitive to external RF energy.
• ALWAYS keep the radio product more than 6
inches (15 cm) from their pacemaker when the
radio product is turned ON.
• Not carry the radio product in a breast pocket.
• Use the ear opposite the pacemaker to minimize
the potential for interference.
• Turn the radio product OFF immediately if you
have any reason to suspect that interference is
taking place.
Aircraft
When instructed to do so, turn off your radio product
when on board an aircraft. Any use of a radio product
must be in accordance with applicable regulations
per airline crew instructions.
Hearing Aids
Some digital wireless radio products may interfere
with some hearing aids. In the event of such
interference, you may want to consult your hearing
aid manufacturer to discuss alternatives.
104
Operational Warnings
Other Medical Devices
If you use any other personal medical device, consult
the manufacturer of your device to determine if it is
adequately shielded from RF energy. Your physician
may be able to assist you in obtaining this
information.
Use While Driving
Check the laws and regulations on the use of radio
products in the area where you drive. Always obey
them.
When using the radio product while driving, please:
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
• Pull off the road and park before making or
answering a call if driving conditions so require.
Operational Warnings
For Vehicles with an Air Bag
Do not place a portable radio product in the area over
the air bag or in the air bag deployment area. Air
bags inflate with great force. If a portable radio is
placed in the air bag deployment area and the air bag
inflates, the radio product may be propelled with
great force and cause serious injury to occupants of
the vehicle.
Potentially Explosive Atmospheres
Turn off your radio product prior to entering any area
with a potentially explosive atmosphere, unless it is a
radio product type especially qualified for use in such
areas as “Intrinsically Safe” (for example, Factory
Mutual, CSA, or UL approved). Do not remove,
install, or charge batteries in such areas. Sparks in a
potentially explosive atmosphere can cause an
explosion or fire resulting in bodily injury or even
death.
Note: The areas with potentially explosive
atmospheres referred to above include
fueling areas such as below decks on
boats, fuel or chemical transfer or
storage facilities, areas where the air
contains chemicals or particles, such as
grain, dust or metal powders, and any
105
Safety and General Information
other area where you would normally be
advised to turn off your vehicle engine.
Areas with potentially explosive
atmospheres are often but not always
posted.
Blasting Caps and Areas
To avoid possible interference with blasting
operations, turn off your radio product when you are
near electrical blasting caps, in a blasting area, or in
areas posted: “Turn off two-way radio”. Obey all signs
and instructions.
Operational Cautions
Antennas
Do not use any portable radio product that has a
damaged antenna. If a damaged antenna comes
into contact with your skin, a minor burn can result.
Batteries
All batteries can cause property damage and/or
bodily injury, such as burns if a conductive material
such as jewelry, keys, or beaded chains touches
exposed terminals. The conductive material may
complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside a
pocket, purse, or other container with metal objects.
Cleaning and Drying Considerations
Using a leather carry case may help protect the
surfaces and help prevent liquids (e.g., rain) from
entering into the interior of the radio product. This
product is not water proof, and exposing the unit to
liquids may result in permanent damage to the unit.
If your radio product interior gets wet, then do not try
to accelerate drying with the use of an oven or a dryer
as this will damage the radio product and void the
warranty. Instead, do the following:
1 Immediately power off the radio product.
2 Remove Battery and SIM card (if so equipped)
from radio product.
3 Shake excess liquid from radio product.
4 Place the radio product and battery in an area that
is at room temperature and has good air flow.
5 Let the radio product, battery, and SIM card dry for
72 hours before reconnecting the battery and/or
powering on the radio product.
If the radio product does not work after following the
steps listed above, contact your dealer for servicing
information.
106
Accessory Safety Information
Clean the external surfaces of the radio product with
a damp cloth, using a mild solution of dishwashing
detergent and water. Some household cleaners may
contain chemicals that could seriously damage the
radio product. Avoid the use of any petroleum-based
solvent cleaners. Also, avoid applying liquids directly
on the radio product.
Accessory Safety Information
Important: Save these accessory safety instructions.
• Before using any battery or battery charger, read
all the instructions for and cautionary markings on
(1) the battery, (2) the battery charger, which may
include a separate wall-mounted power supply or
transformer, and (3) the radio product using the
battery.
• Do not expose any battery charger to water, rain,
or snow as they are designed for indoor or
in-vehicle use only.
Warning: To reduce the risk of injury,
charge only the rechargeable batteries
described in “Battery” on page 3
through page 5. Other types of
batteries may burst, causing personal
injury and damage.
• To reduce the risk of damage to the cord or plug,
pull by the plug rather than the cord when you
disconnect the battery charger from the power
source outlet.
• Do not operate any battery charger with a
damaged cord or plug — replace them
immediately.
• Battery chargers may become warm during
operation, but not hot. If it becomes hot to the
touch, unplug it from the power outlet immediately
and discontinue its use.
• Use of a non-recommended attachment to a
battery charger may result in a risk of fire, electric
shock, or injury to persons.
• Make sure the battery charger power cord is
located so that it will not be stepped on, tripped
over, or subjected to damage or stress.
• An extension cord should not be used with any
battery charger unless absolutely necessary. Use
of an improper extension cord could result in a risk
of fire and electric shock. If an extension cord must
be used, make sure that:
• The pins on the plug of the extension cord are
the same number, size, and shape as those on
the plug of the charger.
• The extension cord is properly wired and in
good electrical condition.
107
Safety and General Information
• The cord size is 18AWG for lengths up to 100
feet and 16AWG for lengths up to 150 feet.
• Do not operate any battery charger if it has
received a sharp blow, has been dropped, or
has been damaged in any way; take it to a
qualified service technician.
• Do not disassemble a battery charger; take it to
a qualified service technician when service or
repair is required. Incorrect reassembly may
result in a risk of electric shock or fire.
• Maximum ambient temperature around the
power supply or transformer of any battery
charger should not exceed 40°C (104°F).
• The output power from the power supply or
transformer must not exceed the rating given on
the Desktop Dual-Pocket Charger.
• The disconnection from the line voltage is made
by unplugging the power supply from the AC
receptacle.
• To reduce risk of electric shock, unplug any
battery charger from the outlet before attempting
any maintenance or cleaning.
For optimum charging performance, turn off the radio
product while charging it in any battery charger.
108
Driving Safety Tips
“Safety is your most important call!”
Your Motorola wireless telephone gives you the
powerful ability to communicate by voice — almost
anywhere, anytime, wherever wireless phone service
is available and safe conditions allow. But an
important responsibility accompanies that benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
If you find it necessary to use your wireless phone
while behind the wheel of a car, practice good
common sense and remember the following tips:
• Get to know your Motorola wireless phone and its
features such as speed dial and redial. If available,
these features help you to place your call without
taking your attention off the road.
• When available, use a hands-free device. If
possible, add an additional layer of convenience to
your wireless phone with one of the many Motorola
Original hands-free accessories available today.
• Position your wireless phone within easy reach. Be
able to access your wireless phone without
removing your eyes from the road. If you receive
an incoming call at an inconvenient time, if
possible, let your voice mail answer it for you.
• Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain,
sleet, snow, ice, and even heavy traffic can be
hazardous.
• If you receive an incoming call at an inconvenient
time do not take notes or look up phone numbers
while driving. Jotting down a “to do” list or going
through your address book takes attention away
from your primary responsibility — driving safely.
• Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road
and your mirrors, then continue.
• Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are driving
and suspend conversations which have the
potential to divert your attention away from the
road.
• Your phone can perform many other functions
besides allowing you to make and receive calls. Do
not let these features distract you from driving. Use
them only when it is safe to do so.
109
Driving Safety Tips
• Use your wireless phone to call for help. Dial 9-1-1
or other local emergency number in the case of
fire, traffic accident or medical emergencies.
• Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives
are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
• Call roadside assistance or a special
non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a
minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or other special
non-emergency wireless number.
110
MOTOROLA LIMITED
WARRANTY
Note: FOR IDEN SUBSCRIBER PRODUCTS,
ACCESSORIES AND SOFTWARE
PURCHASED IN THE UNITED STATES
OR CANADA
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola,
Inc. warrants its Motorola iDEN Digital Mobile and
Portable Handsets ("Products"), Motorola-branded or
certified accessories sold for use with these Products
("Accessories") and Motorola software contained on
CD-Roms or other tangible media and sold for use
with these Products ("Software") to be free from
defects in materials and workmanship under normal
consumer usage for the period(s) outlined below.
This limited warranty is a consumer's exclusive
remedy, and applies as follows to new Products,
Accessories and Software purchased by
consumers in the United States or Canada, which
are accompanied by this written warranty:
PRODUCTS COVERED
LENGTH OF
COVERAGE
Products as defined
above.
One (1) year from the
date of purchase by the
first consumer purchaser
of the product.
Accessories as defined One (1) year from the
above.
date of purchase by the
first consumer purchaser
of the product.
Products or
Accessories that are
Repaired or Replaced.
The balance of the
original warranty or for
ninety (90) days from
the date returned to the
consumer, whichever is
longer.
Software as defined
Ninety (90) days from
above. Applies only to
the date of purchase.
physical defects in the
media that embodies the
copy of the software (e.g.
CD-ROM, or floppy disk).
111
MOTOROLA LIMITED WARRANTY
What is not covered? (Exclusions)
Normal Wear and Tear. Periodic maintenance,
repair and replacement of parts due to normal wear
and tear are excluded from coverage.
Batteries. Only batteries whose fully charged
capacity falls below 80% of their rated capacity and
batteries that leak are covered by this limited
warranty.
Abuse & Misuse. Defects or damage that result
from: (a) improper operation, storage, misuse or
abuse, accident or neglect, such as physical damage
(cracks, scratches, etc.) to the surface of the product
resulting from misuse; (b) contact with liquid, water,
rain, extreme humidity or heavy perspiration, sand,
dirt or the like, extreme heat, or food; (c) use of the
Products or Accessories for commercial purposes or
subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not
the fault of Motorola, are excluded from coverage.
Use of Non-Motorola Products and Accessories.
Defects or damage that result from the use of
Non-Motorola branded or certified Products,
Accessories, Software or other peripheral equipment
are excluded from coverage.
112
Unauthorized Service or Modification. Defects or
damages resulting from service, testing, adjustment,
installation, maintenance, alteration, including without
limitation, software changes, or modification in any
way by someone other than Motorola, or its
authorized service centers, are excluded from
coverage.
Altered Products. Products or Accessories with (a)
serial numbers or date tags that have been removed,
altered or obliterated; (b) broken seals or that show
evidence of tampering; (c) mismatched board serial
numbers; or (d) nonconforming or non-Motorola
housings, antennas, or parts, are excluded from
coverage.
Communication Services. Defects, damages, or the
failure of Products, Accessories or Software due to
any communication service or signal you may
subscribe to or use with the Products, Accessories or
Software is excluded from coverage.
Software Embodied in Physical Media. No
warranty is made that the software will meet your
requirements or will work in combination with any
hardware or software applications provided by third
parties, that the operation of the software products
will be uninterrupted or error free, or that all defects in
the software products will be corrected.
Software NOT Embodied in Physical Media.
Software that is not embodied in physical media (e.g.
software that is downloaded from the internet), is
provided "as is" and without warranty.
Who is covered? This warranty extends only to the
first consumer purchaser, and is not transferable.
What will Motorola Do? Motorola, at its option, will
at no charge repair, replace or refund the purchase
price of any Products, Accessories or Software that
does not conform to this warranty. We may use
functionally equivalent
reconditioned/refurbished/pre-owned or new
Products, Accessories or parts. No data, software or
applications added to your Product, Accessory or
Software, including but not limited to personal
contacts, games and ringer tones, will be reinstalled.
To avoid losing such data, software and applications
please create a back up prior to requesting service.
How to Obtain Warranty Service or Other
Information? To obtain service or information,
please call:
Motorola iDEN Customer Services 1-800-453-0920
or 954-723-4910
TTY-877-483-2840
Or visit us online at
http://www.motorola.com/iden/support
You will receive instructions on how to ship the
Products, Accessories or Software, at your expense,
to a Motorola Authorized Repair Center. To obtain
service, you must include: (a) a copy of your receipt,
bill of sale or other comparable proof of purchase; (b)
a written description of the problem; (c) the name of
your service provider, if applicable; (d) the name and
location of the installation facility (if applicable) and,
most importantly; (e) your address and telephone
number.
What Other Limitations Are There? ANY IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY,
OTHERWISE THE REPAIR, REPLACEMENT, OR
REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS
PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO
EVENT SHALL MOTOROLA BE LIABLE, WHETHER
IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF
THE PURCHASE PRICE OF THE PRODUCT,
ACCESSORY OR SOFTWARE, OR FOR ANY
INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR
LOSS OF REVENUE OR PROFITS, LOSS OF
113
MOTOROLA LIMITED WARRANTY
BUSINESS, LOSS OF INFORMATION OR DATA,
SOFTWARE OR APPLICATIONS OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY
TO USE THE PRODUCTS, ACCESSORIES OR
SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the
limitation or exclusion of incidental or
consequential damages, or limitation on the
length of an implied warranty, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and
you may also have other rights that vary from
state to state or from one jurisdiction to another.
Laws in the United States and other countries
preserve for Motorola certain exclusive rights for
copyrighted Motorola software such as the exclusive
rights to reproduce and distribute copies of the
Motorola software. Motorola software may only be
copied into, used in, and redistributed with, the
Products associated with such Motorola software. No
other use, including without limitation disassembly of
such Motorola software or exercise of the exclusive
rights reserved for Motorola, is permitted.
114
Limited Warranty
Motorola Communication
Products (International)
Note: This Warranty applies in Singapore and the
Philippines.
I. What This Warranty Covers
and For How Long:
MOTOROLA warrants the MOTOROLA
manufactured iDEN Communication Products listed
below (“Product”) against defects in material and
workmanship under normal use and service for a
period of time from the date of purchase as
scheduled below:
iDEN Subscriber Digital Mobile and
Portable Units
One (1) Year
Product Accessories (manufactured
One (1) Year
by or under license from MOTOROLA)
Batteries
One (1) Year
Rechargeable Batteries will be replaced during the
applicable warranty period if:
a. the battery capacity falls below 80% of rated
capacity, or
b. the battery develops leakage.
MOTOROLA, at its option, will at no charge either
repair the Product (with new or reconditioned parts),
replace it (with a new or reconditioned Product), or
refund the purchase price of the Product during the
warranty period provided it is returned in accordance
with the terms of this warranty. Replaced parts or
boards are warranted for the balance of the original
applicable warranty period. All replaced parts of
Product shall become the property of MOTOROLA.
This express limited warranty is extended by
MOTOROLA to the original end user purchaser only
and is not assignable or transferable to any other
party. This is the complete warranty for the Product
manufactured by MOTOROLA. MOTOROLA
assumes no obligations or liability for additions or
modifications to this warranty unless made in writing
and signed by an officer of MOTOROLA. Unless
made in a separate agreement between MOTOROLA
and the original end user purchaser, MOTOROLA
does not warrant the installation, maintenance or
service of the Product.
MOTOROLA cannot be responsible in any way for
any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of the
Product with any ancillary equipment, and all such
115
Limited Warranty Motorola Communication Products (International)
equipment if expressly excluded from this warranty.
Because each system which may use the Product is
unique, MOTOROLA disclaims liability for range,
coverage, or operation of the system as a whole, or
any portion of the system not produced by
MOTOROLA, under this warranty.
II. General Provisions:
This warranty sets forth the full extent of
MOTOROLA’S responsibilities regarding the Product,
Repair, replacement or refund of the purchase price,
at MOTOROLA’S options, is the exclusive remedy.
THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED
WARRANTIES, INLCUDING WITHOUT
LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY TO THE
FULL EXTENT SUCH MAY BE DISCLAIMED BY
LAW. IN NO EVENT SHALL MOTOROLA BE
LIABLE FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, FOR ANY
LOSS OF USE, LOSS OF TIME, INCONVENIENCE,
COMMERCIAL LOSS, LOST PROFITS OR
SAVINGS OR OTHER INCIDENTAL, SPECIAL OR
116
CONSEQUENTIAL DAMAGES ARISING OUT OF
THE USE OR INABILITY TO USE SUCH PRODUCT,
TO THE FULL EXTENT SUCH MAY BE
DISCLAIMED BY LAW.
III. How to Get Warranty
Service:
You must provide proof of purchase (bearing the date
of purchase and Product item serial number) in order
to receive warranty service and, also, deliver or send
the Product item, transportation and insurance
prepaid, to an authorized warranty service location.
Warranty service will be provided by MOTOROLA
through one of its authorized warranty service
locations. If you first contact the company which sold
you the Product (e.g., dealer or communication
service provider), it can facilitate your obtaining
warranty service.
IV. What This Warranty Does
Not Cover:
a. Defects or damage resulting from use of the
Product in other than its normal and customary
manner.
b. Defects or damage from misuse, accident, water,
or neglect.
c. Defects or damage from improper testing,
d.
e.
f.
g.
h.
i.
j.
operation, maintenance, installation, alteration,
modification, or adjustment.
Breakage or damage to antennas unless caused
directly by defects in material workmanship.
A Product subjected to unauthorized Product
modifications, disassemblies or repairs
(including, without limitation, the audition to the
Product of non-MOTOROLA supplied
equipment).
Product which has had the serial number
removed or made illegible.
Rechargeable batteries if:
1.Any of the seals on the battery enclosure of
cells are broken or show evidence of
tampering.
2.The damage or defect is caused by charging
or using the battery in equipment or service
other than the Product for which it is specified.
Freight costs to the repair depot.
A Product which, due to illegal or unauthorized
alteration of the software/firmware in the Product,
does not function in accordance with
MOTOROLA’S published specifications or the
local type acceptance labeling in effect for the
Product at the time the Product was initially
distributed from MOTOROLA.
Scratches or other cosmetic damage to Product
surfaces that does not effect the operation of the
Product.
k. Normal and customary wear and tear.
l. Exclusion for defects or damage arising from use
of the products in connection with
non-MOTOROLA equipment.
VI. Patent and Software
Provisions:
MOTOROLA will defend, at its own expense, any suit
brought against the end user purchaser to the extent
that it is based on a claim that the Product or parts
infringe a patent, and Motorola will pay those costs
and damages finally awarded against the end user
purchaser in any such suit which are attributable to
any such claim, but such defense and payments are
conditioned on the following:
a. That MOTOROLA will be notified promptly in
writing by such purchaser of any notice of such
claim;
b. That MOTOROLA will have sole control of the
defense of such suit and all negotiations for its
settlement or compromise; and
c. Should the Product or parts become, or in
MOTOROLA’S opinion be likely to become, the
subject of a claim of infringement of a patent, that
such purchaser will permit MOTOROLA, at its
117
Limited Warranty Motorola Communication Products (International)
option and expense, either to procure for such
purchaser the right to continue using the Product
or parts or to replace or modify the same so that it
becomes non-infringing or to grant such
purchaser a credit for the Product or parts as
depreciated and accept its return. The
depreciation will be an equal amount per year
over the lifetime of the Product or parts as
established by MOTOROLA.
MOTOROLA will have no liability with respect to any
claim of patent infringement which is based upon the
combination of the Product or parts furnished
hereunder with software, apparatus or devices not
furnished by MOTOROLA, nor will MOTOROLA have
any liability for the use of ancillary equipment or
software not furnished by MOTOROLA which is
attached to or sued in connection with the Product or
any parts thereof. In no event shall MOTOROLA be
liable for any incidental, special or consequential
damages arising from any claim of patent
infringement or alleged infringement.
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights for
copyrighted MOTOROLA software, such as the
exclusive rights to reproduce in copies and distribute
copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which
the software was originally embodied and such
software in such Product may not be replaced,
118
copied, distributed, modified in any way, or used to
produce any derivative thereof. No other use
including, without limitation, alteration, modification,
reproduction, distribution, or reverse engineering of
such MOTOROLA software or exercise or rights in
such MOTOROLA software is permitted. No license
is granted by implication, estoppel or otherwise under
MOTOROLA patent rights or copyrights.
Patent and Trademark
Information
MOTOROLA, the Stylized M Logo and all other
trademarks indicated as such herein are trademarks
of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2003
Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are
registered trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
reproduce the copyrighted software. Accordingly, any
copyrighted software contained in the Motorola
products may not be modified, reverse-engineered,
distributed, or reproduced in any manner to the
extent allowed by law. Furthermore, the purchase of
the Motorola products shall not be deemed to grant
either directly or by implication, estoppel, or
otherwise, any license under the copyrights, patents,
or patent applications of Motorola or any third party
software provider, except for the normal,
non-exclusive, royalty-free license to use that arises
by operation of law in the sale of a product.
T9® Text Input Patent and Trademark Information
This product is covered by U.S. Pat. 5,818,437, U.S.
Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending.
All other product names or services mentioned in this
manual are the property of their respective trademark
owners.
Software Copyright Notice
The Motorola products described in this manual may
include copyrighted Motorola and third party software
stored in semiconductor memories or other media.
Laws in the United States and other countries
preserve for Motorola and third party software
providers certain exclusive rights for copyrighted
software, such as the exclusive rights to distribute or
119
Patent and Trademark Information
120
Index
Numerics
2-way radio 96
see also Private calls, group
calls, and call alerts
3-way calling 72
Accessories 15
safety 107
Alpha mode 83
Backlight 94, 95
Battery
care 5
charging 4, 5
cover 3
inserting 4
safety 106
Baud rate 97
Call alerts 23
deleting 24
queue 23
receiving 23
responding 23, 24
sending 23
sorting 24
viewing 23
Call forwarding 33
all calls 33
missed calls 34
off 33
Call Timers 75
Call Waiting 71
off 71
Calls
3-way 72
answering automatically 95
answering with any key 95
emergency 22
ending 18
entering number 18
from Contacts 19
from Datebook 21
from memo 79
from Recent calls 19
group, see Group calls
icons 18
international 73
making 17
on hold 71
phone calls 17
Private calls 17, 21, 96
receiving 17
redialing 20, 95
Speed Dial 20
TTY, see TTY calls
Turbo Dial 20
voice name 20
Circuit data 76
Clock 95
CompanionPro 32
Contacts 19, 27
capacity 31
CompanionPro 32
creating entries 29
deleting 31
editing entries 30
icons 27
International numbers 32
121
Index
searching 28
showing all entries 28
showing only Private IDs 28
SIM card 27
storing fast 30
storing from idle screen 30
storing from Memo 30, 79
storing from recent calls 25, 30
type 25, 27
viewing 28
voice name 30
with non-i205 phones 32
Cover, see phone 74
Datebook 21
Display
backlight 94, 95
contrast 92
options 9
screen 8
Email 27, 29, 76
receiving 41
122
sending 41
Emergency calls 22
End key 2
Faxes
receiving 76
sending 76
Icons
calls 18
Contacts 27
mobile originated text
messaging 46
Recent calls 25
status 11
text entry 83
Idle screen 9
storing to Contacts 30
International numbers 73
calling 73
storing 32
GPS Enabled 61
almanac data 65
best results 64
emergency calls 22, 62
map software 67
privacy options 66
security 66
viewing location 63
GPS PIN 97
GPS, see GPS Enabled
Group calls 74, 96
making 74
off 75
receiving 74
Handset, see phone
Headset 92
Java applications
deleting 56
memory 57
Keypad 2
locking 15, 97
Language 95
Lists, see menus
Memo 79
calling from 79
creating 79
editing 79
storing to Contacts 30, 79
viewing 79
Memory
Java applications 57
mobile originated text
messaging 47
ring tones 37
voice records 70
Menu key 2, 10
Menus 9
context-sensitive 2, 10
main menu 10
Message notifications 39
setting options 39
Messages 39
see also mobile originated text
messaging
reading 41
receiving 39
text and numeric 40
Mobile originated text messaging
43
creating messages 44
deleting 47
drafts 46
icons 46
memory 47
outbox 46
quick notes 45
reading messages 44
receiving messages 43
sending messages 44
sent messages 47
setting up 43
Mute 22
Navigation key 2
Net alerts 41
Numeric mode 85
Over-the-air programming 7
Packet data 76
Passwords 97
Patent information 119
Pauses
dialing 72
storing 31
Phone 1, 8
active line 95
cover action 74
locking 96
modem 76
off 6
on 6
only 97
setting up 2, 8
Programming, over-the-air 7
PTT
One Touch 21
One Touch, setting 73
PUK code 13
123
Index
Radio frequency 101
Recent calls 19, 25
deleting 26
display time 97
icons 25
storing to Contacts 25, 30
viewing 25
Redialing 20, 95
Ring tones 27, 35
deleting 37
downloading 37
memory 37
off 35
setting 35
setting in Contacts 29, 36
silent 35, 36
vibrate 35, 36
viewing assigned 37
Ringer 91
see also Ring tones
off 91
Safety 101
124
accessory 107
battery 106
driving 109
electromagnetic interference
104
medical devices 104
radio frequency 101
Security 96
Service provider 15
Service, activating 6
Settings 94
resetting 97
SIM card 3, 12, 14
Contacts 27
inserting 14
removing 14
with non-i205 phones 32
SIM PIN 12, 97
changing 12
default 12
entering 12
requirement 13
unblocking 13
Speakerphone 21
Speed Dial 20, 28, 30
Status messages 99
Symbols mode 85
T9 Text Input, see text entry
Talkgroups 8, 74, 96
Text display area 9, 18
Text entry 83
Alpha mode 83
database 83, 84
icons 83
mode 83
Numeric mode 85
Symbols mode 85
Word mode 83
Text messages 40
Trademark information 119
TTY calls 76
baud rate 77
making 76
mode 77
on 77
Turbo Dial 20
V
Voice mail 39
receiving 40
sending calls to 17, 40
setting up 8, 34, 39
Voice name 20, 28
creating 30
Voice records 69
creating 69
deleting 70
labelling 69
locking 70
memory 70
playing 69
Volume, setting 91, 96
Waits
dialing 72
storing 31
Warranty 115
Word mode 83
125
Index
126
Quick Access
To access the idle screen at any time:
Press e.
When you are entering a number using your keypad,
you can access these features by pressing m:
• store the number to Contacts
• insert a pause
• Call Setup options
To access My Info:
1 Press m.
2 Press #.
[MORE SHORT CUTS AND TIPS HERE.]
127

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Producer                        : Acrobat Distiller 4.05 for Windows
Author                          : eer016
Title                           : i730Mot.book
Modify Date                     : 2003:06:13 13:32:14-04:00
Create Date                     : 2003:06:13 12:07:17
Creator                         : FrameMaker 6.0
Page Count                      : 135
Page Mode                       : UseOutlines
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AZ489FT5824

Navigation menu