Motorola Solutions 89FT5833 iDEN i860 User Manual i860Mot
Motorola Solutions, Inc. iDEN i860 i860Mot
users manual
Motorola
iDEN
Digital Multi-service Data-capable Phone
i860 Phone User’s Guide
APPROVAL DRAFT
@NNTN5565A@
NNTN5565A
IMPORTANT NOTICE: PLEASE READ
PRIOR TO USING YOUR PHONE
The SIM card provided in this kit is intended for use with
the phone provided in this package.
Loss of certain features will result when using a SIM
card from one of the following models: i30sx,i35s,
i50sx,i55sr,i58sr,i60c,i80s,i85s,i88s,i90c,i95cl
series, and the i2000 series.
For more information on SIM card compatibility, go to
www.motorola.com/iden/support.
Defects or damage to your Motorola phone that result
from the use of non-Motorola branded or certified
Accessories, including but not limited to replacement
housings and or other peripheral accessories, are
excluded from warranty coverage. Please refer to the
text of Motorola's Limited One Year warranty located in
this user’s guide for complete details.
i
Contents
Getting Started........................................... 1
Locating Your SIM Card....................................3
Battery...............................................................3
Activating Service..............................................6
Powering On and Off.........................................6
Enabling Over-the-Air Security..........................7
Phone Programming .........................................7
Finding Your Phone Number and Private ID.....7
Phone Basics ....................................................8
SIM Card Security ...........................................11
Accessories.....................................................16
For More Information.......................................16
Making Calls............................................. 17
Phone Calls.....................................................17
Private Calls ....................................................17
Receiving Calls................................................18
Choosing a Number to Call .............................19
Missed Phone Calls.........................................20
Using Speakerphone.......................................20
Using Mute ......................................................21
Making Emergency Phone Calls .....................21
Call Alerts..................................................22
Sending Call Alerts..........................................22
Receiving Call Alerts .......................................22
Using the Call Alert Queue..............................22
Recent Calls..............................................24
Calls and Call Alerts........................................24
My Info From Other Phones............................24
Contact Information From Other Phones ........25
Viewing the Recent Calls List..........................25
Storing Items to Contacts................................26
Deleting Items .................................................26
Making Calls From the Recent Calls List ........27
Contacts ....................................................29
Accessing Contacts.........................................30
Creating Entries ..............................................30
Storing Numbers Faster ..................................32
Editing Entries .................................................32
Viewing Entries ...............................................33
ii
Deleting Entries...............................................35
Checking Capacity ..........................................35
Creating Pauses and Waits.............................35
International Numbers.....................................36
Making Calls From Contacts ...........................36
Accessing Contacts with GSM Phones...........37
Call Forwarding........................................ 38
Forwarding All Calls ........................................38
Turning Off Call Forwarding ............................38
Forwarding Missed Calls.................................39
Viewing Call Forwarding Settings....................39
Advanced Calling Features..................... 40
Call Waiting .....................................................40
Switching Between Calls .................................40
Putting a Call on Hold......................................41
Calling 2 People..............................................41
Creating Pauses and Waits While Dialing.......42
Making International Calls ...............................42
One Touch PTT...............................................42
Setting Flip Actions..........................................43
Group Calls .....................................................44
Call Timers......................................................45
Using Your Phone as a Modem ......................45
Making TTY Calls............................................46
Memo .........................................................49
Ring Tones................................................50
Setting Your Phone to Vibrate.........................50
Ring and Vibrate .............................................51
Assigning Ring Tones to Contacts..................51
Viewing Ring Tone Assignments ....................51
Downloading More Ring Tones.......................52
Managing Memory ..........................................52
Deleting Custom Ring Tones ..........................52
Entering Text ............................................53
Using Word Mode ...........................................53
Special Function Keys.....................................54
Messages ..................................................55
Message Notifications .....................................55
Message Center..............................................56
iii
Voice Mail Messages............................... 57
Receiving a Message......................................57
Accessing Voice Mail From
the Message Center ...................................57
Sending Unanswered Calls to Voice Mail .......57
MOSMS Messages................................... 58
Setting Up........................................................58
Receiving a Message......................................58
Reading from the Message Center .................59
Creating and Sending Messages ....................59
Sorting Messages............................................62
Managing Memory...........................................62
Camera ..................................................... 63
Taking Pictures................................................63
More Actions for Captured Pictures ................65
Recording Video..............................................65
Accessing the Media Center ...........................66
Customizing the Camera.................................66
Managing Memory...........................................67
Media Center ............................................ 68
Viewing the Media Center ...............................68
Forward Locked Items.....................................69
Pictures ...........................................................70
Videos .............................................................71
Audio Recordings............................................71
Renaming Items ..............................................72
Locking Items..................................................72
Deleting Items .................................................72
Accessing the Camera ....................................73
Managing Memory ..........................................73
Using Send via PTT..................................74
Sending a Picture............................................74
Receiving a Picture .........................................75
Sending My Info and Contact Information.......76
My Info.......................................................78
Viewing My Info...............................................78
Editing My Info ................................................78
Setting Sending Options .................................79
Voice Records ..........................................80
Viewing Voice Records ...................................80
Creating Voice Records ..................................80
iv
Playing Voice Records ....................................81
Labeling Voice Records ..................................81
Locking Voice Records....................................81
Deleting Voice Records...................................82
Managing Memory...........................................82
Java Applications .................................... 83
Installing Applications......................................83
Running Applications.......................................83
Suspending Applications.................................83
Resuming Applications....................................84
Ending Applications.........................................84
Downloading Applications ...............................84
Deleting Applications.......................................84
Managing Memory...........................................85
Shortcuts on the Main Menu ...........................85
Java Applications and GPS Enabled...............86
GPS Enabled ............................................ 89
IMPORTANT: Things to Keep in Mind ............89
Making an Emergency Call .............................90
Viewing Your Approximate Location ...............91
Enhancing GPS Performance .........................92
Updating Satellite Almanac Data ....................94
Setting Privacy Options...................................95
Using GPS with Map Software........................96
Datebook ...................................................98
Viewing Datebook ...........................................98
Creating Events...............................................99
Editing Events ...............................................101
Deleting Events .............................................101
Receiving Reminders ....................................102
Making Calls From Datebook........................102
Customizing Datebook Setup........................103
Customizing Your Phone.......................104
Setting the Volume........................................104
Setting Your Phone to Vibrate.......................104
Changing the Look of Your Phone ................104
Temporarily Turning Off Calls .......................106
Using Settings ...............................................107
Profiles ....................................................111
Viewing Profiles.............................................111
Switching Profiles..........................................111
v
How Changing Settings Affects Profiles........111
Temporary Profiles ........................................112
Creating Profiles............................................113
Editing Profiles ..............................................113
Deleting Profiles ............................................113
Setting Call Filtering ......................................114
Shortcuts................................................ 116
Creating a Shortcut .......................................116
Using a Shortcut............................................116
Editing a Shortcut..........................................117
Deleting Shortcuts.........................................117
Understanding Status Messages ......... 118
Safety and General Information ........... 120
RF Operational Characteristics .....................120
Portable Radio Product Operation and EME
Exposure...................................................120
Electro Magnetic Interference/Compatibility..123
Medical Devices ............................................123
Operational Warnings....................................124
Operational Cautions.....................................125
Accessory Safety Information........................126
MOTOROLA LIMITED WARRANTY.......128
Limited Warranty
Motorola Communication Products
(International)......................................132
Using a Headset .....................................136
Attaching a Headset......................................136
Using a Remote PTT Button .........................136
Patent and Trademark Information.......137
Index ........................................................138
Driving Safety Tips.................................144
vi
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i860
Model Number: H73XAN6RR4AN
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)
Class B Digital Device
As a personal computer peripheral, this device
complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
•Reorient or relocate the receiving
antenna.
•Increase the separation between the
equipment and receiver.
•Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced
radio/TV technician for help.
1
Getting Started
volume
controls
Push-To-TalkTM
(PTTTM) button
accessory connector
audio jack
speaker
(in back)
retractable
antenna
flip open
button
camera
lens
microphone
light sensor
camera
short-range
spotlight
2
Getting Started
To start using your i860 phone:
•Make sure your SIM card is in place.
•Charge the battery.
•Activate your service.
•Enable over-the-air security if you are prompted
to.
pPower button.
Navigation key — press the arrows to
scroll through menus and lists.
OOK key — selects highlighted item;
answers calls.
mMenu key — accesses context-sensitive
menus.
AOption key — selects the option
appearing above it on the display.
sSend key — places phone calls.
eEnd key — ends phone calls; returns to
idle screen.
tActs like swhentheflipisclosed;turns
speaker on; used with voice names and
voice records.
.Acts like ewhen the flip is closed;
accesses recent calls; sends incoming
calls to voice mail.
3
Locating Your SIM Card
Locating Your SIM Card
Your SIM (Subscriber Identity Module) card is a
small piece of plastic located in the SIM card
holder in the back of your phone, underneath the
battery.
If your SIM card is not in the SIM card holder, it
may be in the box your phone came in, attached to
a piece of plastic about the size of a credit card. If
this is the case, carefully detach your SIM card
from the surrounding plastic and insert it as
described in “Inserting Your SIM Card” on page 14.
If there is no SIM card in your phone or the box,
contact your service provider.
Battery
Removing the Battery Door
1Make sure the phone is powered off.
2Slide the release button back until it releases the
battery door.
3Allow the battery door to pop up, slide it forward,
and remove it from the back of your phone.
SIM card
release
button
4
Getting Started
Inserting the Battery
1Remove the battery door.
2Insert the top of the battery into the battery area.
Press the bottom of the battery to secure it.
3Replace the battery door and press it gently until
you hear a click.
Charging the Battery
Your phone comes with a battery charger.
1Plug the charger into an electrical outlet.
2Open the connector cover.
3Plug the other end of the charger into the
accessory connector.
Tip: To remove the charger from the accessory
connector: Press the buttons on the sides
of the plug. Pull the plug straight out.
connector
cover
5
Battery
4When charging the battery for the first time,
charge for 30 minutes longer than the time
shown in “Charging Times”.
Charging Times
Check your battery and charger type against the
grid below to determine appropriate charging
times.
For best results, charge the batteries within the
temperature range of 50°F to 104°F (10°C to
40°C).
Prolonged charging is not recommended.
Removing the Battery
1With your phone powered off, remove the
battery door.
2Remove the battery by pushing it toward the
antenna and lifting it out.
Battery Use and Maintenance
•The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
•Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
Battery Charger
Rapid Standard
Slim 2hours 3hours
High
Performance 2hours 4hours
6
Getting Started
•Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
•The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.
Activating Service
The first time you power your phone on, you must
be in your local calling area. This activates your
service.
Powering On and Off
The first time you power your phone on, a screen
may appear asking you to update your browser
information. This means you must enable security.
To power your phone on:
1Open the flip.
Tip: Press the flip open button to open the flip
easily.
2Press p.
To power your phone off:
1Open the flip.
2Press and hold p.
When You Power On For the First
Time
If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See “Entering the PIN” on page 12.
Press Aunder Ok.
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card (see “Changing the PIN” on page
12).
As your phone connects to the network, you will
see a welcome message and a connecting
message. When the idle screen appears, the
phone is ready to use.
7
Enabling Over-the-Air Security
Enabling Over-the-Air
Security
If you are set up to receive over-the-air
programming from your service provider, you must
enable security the first time you power on your
phone or within 20 days of first activation of your
phone:
1When you power on your phone for the first time,
after the idle screen appears, you will be
prompted to select Ok to update your browser
information.
Note: If you press Aunder Later,youwillbe
prompted to enable security each time
you power on your phone until you press
Aunder Ok.
2Press Aunder Ok.
3You are prompted to enable security. Press A
under Yes. A series of screens appears. If you
subscribe to your service provider’s plan, your
home page appears.
4Press eto return to the idle screen.
Phone Programming
Within 24 hours of enabling security, you may
receive an alert notification containing your Private
ID and Talkgroup lists for Private calls.
To accept programming:
1When you receive an alert notification saying
New Browser Message - Receive
Programming Info,pressOor press Aunder
Goto.
2You are prompted to accept changes to your
lists. Press Oor press Aunder Ok.
3If you are prompted again to accept changes to
your lists, press Oor press Aunder Ok.
4A confirmation screen displays. Press Oor
press Aunder Ok.
5Press eto return to the idle screen.
Finding Your Phone Number
and Private ID
My Info lets you view your phone number, Private
ID, and other phone information:
1Press mto access the main menu.
2Scroll to My Info.
3Press O.
4Scroll to see your information.
Line 1 and Line 2 are your phone numbers.
Private is your Private ID, the number that others
use to contact you using Private service. These
numbers appear when you receive your alert
notification after enabling security on your phone.
8
Getting Started
See“MyInfo”onpage78formoreinformation
about this feature.
Phone Basics
Display
Any time your phone is powered on, the display
provides you with information and options.
The external display shows a shortened version of
the internal display. To see more information, open
the flip.
The screen shown is the idle screen. The text that
appears on your idle screen depends on your
service provider. The idle screen appears when
your phone is on, but not engaged in any activity.
Text Area
This area displays menus, messages, names,
phone numbers, and other information.
Display Options
Two display options appear at the bottom of most
screens. You select a display option by pressing
theoptionkeybelowit.
Menus and Lists
Your phone’s features are arranged in menus,
submenus, and lists.
Toaccesstheitemsinamenuorlist,scrollusing
the navigation key at the top of your keypad. This
key lets you scroll up, down, left, or right. Holding
down the appropriate part of the navigation key
speeds up scrolling.
In this guide, this symbol >tells you to select a
menu or list item. For example, Settings >
Security means:
1Scroll to Settings on the main menu.
2Press Oto see the Settings screen.
status icons
text area
menu icon
display options
9
Phone Basics
3Scroll to Security.
4Press Oto see the Security screen.
OK Key
Pressing O:
•Selects the highlighted menu item or list item
•Sets options
•Confirms actions
•Places and answer calls
Menu Key
Many features provide context-sensitive menus
that let you access related features and actions.
This icon Sappears any time a context-sensitive
menu is available. Press mto access the menu.
Main Menu
All your phone’s features can be accessed through
themainmenu.Youcansetthemainmenuto
appear as a list or as large icons.
aBrowser Browse the Web.
qJava Apps Java applications on your
phone. See page 83.
bSettings Customize your phone.
Seepage104.
mRing Tones Assign ring tones and turn
ringer off. See page 50.
CCamera Take pictures and videos.
Seepage63.
mMedia Center Store and view pictures,
videos, and audio
recordings. See page 68.
cVoiceRecord Record and play audio
messages. See page 80.
jMy Info Access personal phone
information, including
phone number and Private
ID. See page 78.
lGPS Find your approximate
geographical location. See
page 89.
dContacts View, store, edit contacts.
Seepage29.
eMessages Access messages. See
page 55.
fCall Forward Set call forwarding
options. See page 38.
10
Getting Started
Quick Access to Main Menu Items
Each arrow in the navigation key and Ocan be
used to access a main menu item from the idle
screen. Each of these keys is assigned to a main
menu item when you receive your phone. To
assign different main menu items, see “Personalize
Features” on page 108.
Status Icons
Status icons appear at the top of the display. Some
appear at all times. Others appear only when your
phone is engaged in certain activities or when you
have activated certain features.
oDatebook Schedule appointments.
Seepage98.
gMemo Store a number to access
later.Seepage49.
hCall Timers Phone usage information.
Seepage45.
iRecent Calls Lists recent calls. See
page 24.
sShortcuts Create shortcuts to
screens. See page 116.
pProfiles Groups of settings you
apply together. See
page 111.
kCall Alert Lists call alerts. See
page 22.
abcd
efgd
Battery Strength — A fuller battery
indicates a greater charge.
opqr
s
Signal Strength — More bars next
totheantennaindicateastronger
signal.
APhone In Use — Your phone is
active on a phone call.
BPrivate In Use — Your phone is
active on a Private call.
CTalkgroup In Use— Your phone is
active on a group call.
12 Active Phone Line —1indicates
phone line 1 is ready to make calls;
2 indicates phone line 2 is ready to
make calls.
GJ
HK
IL
Call Forward — Your phone is set
to forward calls. See page 38.
11
SIM Card Security
Entering Numbers From the Keypad
To enter numbers at the idle screen or any screen
that requires you to enter numbers, press the
numbers on the keypad.
Ifyoumakeamistake:
•To clear a digit, press Aunder Delete.
•To clear all digits, press and hold Aunder
Delete.
•To insert or delete a digit anywhere in the string
of digits you have entered, scroll left or right.
•To c an cel , p res s e.
SIM Card Security
Your SIM card protects your personal information.
The SIM card stores all your Contacts information.
Since this information is stored on your SIM card,
not in your phone, you can remove the information
by removing your SIM card.
QRM Ringer Off — Your phone is set not
to ring. See page 50.
u Speaker Off — Sounds associated
with Private calls and group calls
are set to come through the
earpiece rather than through the
speaker.
wxT
yz
Messages — You have one or
more messages. See page 55.
DE Internet — You are ready to
browse the internet.
cVoice Record — You have one or
more voice records stored. See
page 80.
UAirplane Mode — Your phone is
set to airplane mode. See
page 107.
YZ Packet Data — You are ready to
transfer packet data or are
transferring packet data. See
page 45.
N O TTY — You are ready to use your
phonetomakecallsusinga
teletypewriter device. See page 46.
tRoaming — You are using your
phone outside your carrier's
network.
12
Getting Started
Note: Except for making emergency calls, your
phone will not function without the SIM
card.
To prevent unauthorized use of your phone, your
SIM card may be protected by a PIN that you enter
each time the phone is powered on. You can
change the PIN or turn off the requirement that it
be entered.
Entering the PIN
You may be required to enter a SIM PIN when you
first use your phone.
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card.
Important: If you enter your PIN incorrectly 3 times,
your SIM card is blocked. To unblock
your SIM card, you must contact your
service provider. See “Unblocking the
PIN” on page 13.
1When the Enter SIM PIN Code screen appears,
enter your SIM PIN. An asterisk appears for
each character entered.
2Press Aunder Ok.
Changing the PIN
1From the main menu, select Settings >
Security > Change Password > SIM PIN.
2At the Enter Old SIM PIN screen, enter the
current SIM PIN.
3Press Aunder Ok.
4At the Enter New SIM PIN screen, enter the
new 4- to 8-digit SIM PIN.
5Press Aunder Ok.
6At the Re-enter New SIM PIN screen, re-enter
the new SIM PIN to confirm.
7Press Aunder Ok.
Turning the PIN Requirement On and
Off
When the SIM PIN requirement is on, you are
prompted to enter your PIN each time you turn on
your phone.
Note: If a SIM PIN is required, your phone will
not function until the SIM PIN is entered,
except for making emergency calls.
When the PIN requirement is off, your phone can
be used without entering a PIN.
13
SIM Card Security
Important: When the SIM PIN requirement is off,
the personal data on your SIM card is
not protected. Anyone can use your
phone and access your personal data.
1From the main menu, select Settings >
Security > SIM PIN.
2Select On or Off.
3Enter the current SIM PIN.
4Press Aunder Ok.
Unblocking the PIN
If you enter your PIN incorrectly 3 times, your SIM
card is blocked. To unblock your SIM card, you
must contact your service provider to get a PIN
Unblock Code (PUK).
Important: If you unsuccessfully enter the PUK
code 10 times, your SIM card is
permanently blocked and must be
replaced. If this happens, all data is
lost. You will get a message to contact
your service provider. Except for
making emergency calls, your phone
will not function with a blocked SIM
card.
To unblock the PIN:
1Press *#m1.
2At your service provider representative’s
request, provide the information needed to give
youaPUKcode.
3Select Unblock PIN.
4Enter the PUK code.
5Enter a new 4- to 8-digit SIM PIN.
6Re-enter your SIM PIN.
If you entered the codes properly, SIM Unlocked
appears on the display.
Inserting and Removing Your SIM
Card
Important: Do not touch the gold-colored areas of
your SIM card.
Switching SIM Cards
Moving your SIM card from one phone to another
moves all your Contacts information, but erases
other information. If you remove your SIM card and
use it with another phone, or use another SIM card
with your phone, the following information is
erased:
•The recent calls list
•Call forwarding settings
14
Getting Started
•Net alerts
•MOSMS drafts, outbox messages, and
customized quick notes
•Pictures, videos, and audio recordings in the
media center, except those that are forward
locked
•Voice records
•Voice names
•Datebook events
•Options set using the Personalize menu
•InformationstoredinMemo
•3 most recent GPS Enabled locations
Inserting Your SIM Card
1With your phone powered off, remove the
battery door and battery.
2Slide the latch to the SIM card holder open.
3Open the SIM card holder.
4Slide the latch away from the SIM card holder.
latch
15
SIM Card Security
5Close the SIM card holder.
Removing Your SIM Card
Important: To avoid loss or damage, do not remove
your SIM card from your phone unless
absolutely necessary.
1With your phone powered off, remove the
battery door and battery. See “Removing the
Battery”onpage5.
2Slide the latch to the SIM card holder open.
3Open the SIM card holder.
latch
16
Getting Started
4Carefully slide your SIM card out of the SIM card
holder.
5Close the SIM card holder.
6Slide the latch toward the SIM card holder.
Note: Protect your SIM card as you would any
delicate object. Store it carefully.
Accessories
To order accessories, log on to our Web site at
www.motorola.com/store/iden or contact your
Motorola Authorized Retailer.
For More Information
If you have questions about your i860 phone,
contact your sales representative or your service
provider.
17
Making Calls
Your i860 phone makes two types of calls: digital
cellular phone calls and Private calls. With Private
calls, you use your phone as a long-range, digital
walkie-talkie.
Phone Calls
With the Flip Open
1Enter the number you want to call.
2To place the call:
Press s.-or-
If you entered the number from the idle screen,
press O.
3To end the call:
Press e.-or-
Close the flip.
To end a call by closing the flip, you must have the
Flip to End feature turned on (see “Setting Flip
Actions” on page 43).
With the Flip Closed
You can make phone calls with the flip closed
using a voice name or the recent call list to select
the number you want to call. See “Using a Voice
Name” on page 19 and “Making Calls From the
Recent Calls List” on page 27.
To end the call, press ..
Private Calls
1If the flip is open, enter the Private ID you want
to call. -or-
If the flip is closed, choose the number as you
would when making a phone call.
2Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3Release the PTT button to listen.
4To end the call:
If the flip is closed, press ..-or-
Press e.-or-
Press Aunder Exit.-or-
Close the flip.
A Private call ends automatically if there is no
activity on the call for a few seconds.
18
Making Calls
Tip: To let someone know you want to talk to
him or her on a Private call, send a call
alert. See “Call Alerts” on page 22.
Receiving Calls
Phone Calls
When you receive a phone call, your phone rings,
vibrates, or lights up its backlight.
Answering
If the flip is closed, press t.-or-
Open the flip. -or-
Press s.-or-
Press O.-or-
Press Aunder Yes.-or-
Press any number key.
To answer a call by opening the flip, you must have
theFliptoAnsfeatureturnedon(see“SettingFlip
Actions” on page 43). To answer a call by pressing
any number key, you must have the Any Key Ans
feature turned on (see “Phone Calls Features” on
page 107).
SendingtoVoiceMail
If the flip is closed, press ..-or-
Press e.-or-
Press Aunder No.
Ending
If the flip is closed, press ..-or-
Press e.-or-
Close the flip.
Private Calls
When you receive a Private call, your phone emits
a chirping sound or vibrates.
Answering
1Wait for the caller to finish speaking.
2Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3Release the PTT button to listen.
Ending
If the flip is closed, press ..-or-
Press e.-or-
Press Aunder Exit.-or-
Close the flip.
A Private call ends automatically if there is no
activity on the call for a few seconds.
19
Choosing a Number to Call
Choosing a Number to Call
You can choose the number you want to call in
many ways:
•Enter the number on the keypad. See “Entering
Numbers From the Keypad” on page 11.
•Say a voice name into your phone. See “Using a
Voice Name”.
•Use Speed Dial or Turbo Dial®to make a phone
call. See “Using Speed Dial and Turbo Dial®”on
page 20.
•Redial the last phone number called. See
“Redialing the Last Number” on page 20.
•Select the number from the recent calls list. See
“Making Calls From the Recent Calls List” on
page 27.
•Select the number from Contacts. See “Making
Calls From Contacts” on page 36.
•Select a number stored in Datebook. See
“Making Calls From Datebook” on page 102.
•Use One Touch PTT to make a Private call. See
“OneTouchPTT”onpage42.
•Use the number in Memo. See “Memo” on page
49.
•Selectthenumberinatextmessageyouhave
received. See “Receiving a Message” on page
58.
Using a Voice Name
IfyouhavecreatedavoicenameinContactsfor
the number you want to call, say the voice name
intoyourphonetoenterthenumber.Seepage30
for information on voice names.
You can use a voice name to enter a number with
theflipopenorclosed.
1Press and hold tuntil a prompt appears
tellingyoutosaythevoicename.
2Speaking into the microphone, say the voice
name assigned to the number you want to call.
Your phone plays the name back to you.
If you are making a phone call, the call is placed
automatically.
Tip: To stop a phone call from being completed,
press .iftheflipisclosedorpresse.
If you are making a Private call, press and hold the
PTTbuttontoplacethecall.
20
Making Calls
Using Speed Dial and Turbo Dial®
Each phone number stored in Contacts is assigned
a Speed Dial number which you can use to call that
number.
Speed Dial
1From the idle screen, use the keypad to enter
the Speed Dial number assigned to the phone
number you want to call.
2Press #.
3Press s.
Turbo Dial
From the idle screen, press and hold the Speed
Dial number (1 through 9) assigned to the phone
number you want to call.
Redialing the Last Number
Press and hold sto place a call to the last phone
number you called.
Missed Phone Calls
When you miss a call, this icon Vand the number
of phone calls you have missed appear briefly.
With the Flip Open
Ifyouwanttodismissthemissedcallmessage,
press Aunder Back.-or-
If you want to view the missed call on the recent
calls list, press Aunder View.
With the Flip Closed
Ifyouwanttodismissthemissedcallmessage,
press ..
If you want to view the missed call on the recent
calls list, press .twice.
Using Speakerphone
Turning on speakerphone makes incoming sound
come out of the phone’s speaker instead of the
earpiece. Speakerphone is available whenever you
areonanactivephonecall.
With the Flip Open
To turn speakerphone on or off:
Press Aunder Spkr.-or-
Press t.
With the Flip Closed
When you make a call with the flip closed,
speakerphone is always on.
21
Using Mute
Opening the flip turns speakerphone off.
Using Mute
Muting calls lets you listen to incoming sound
without transmitting sound. Mute is available
whenever you are on an active call.
To turn mute on:
Press Aunder Mute.
Whilemuteison,Unmute appears as a display
option.
To turn mute off:
Press Aunder Unmute.
Making Emergency Phone
Calls
Your phone supports emergency calling.
Emergency phone calls can be made even when
your SIM card is blocked or not in your phone.
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
When you make an emergency call, your phone’s
GPS Enabled feature can help emergency service
personnel find you, if you are in a location where
your phone's GPS antenna has established a clear
view of the open sky and your local emergency
response center has the equipment to process
location information. See “GPS Enabled” on page
89, and particularly “IMPORTANT: Things to Keep
in Mind” on page 89 and “Making an Emergency
Call” on page 90, for more information on the
limitations of this feature. Because of the
limitations of this feature, always provide your best
knowledge of your location to the emergency
response center when you make an emergency
call.
Important: Emergency calls cannot be placed while
the keypad is locked.
Important: If you have not registered on the
network, emergency calls cannot be
placed while your SIM card is in your
phone.
22
Call Alerts
Sending a call alert lets the recipient know you
want to talk to him or her on a Private call.
When you send a call alert, the recipient’s phone
emits a series of beeps, or vibrates, and displays
your name or Private ID.
The recipient can:
•Answer — begin a Private call with the sender
•Queue — store the call alert to the call alert
queue, which is a list of call alerts
•Clear — dismiss and delete the call alert
Sending Call Alerts
1Enter the Private ID you want to send to, as you
wouldwhenmakingaPrivatecall.
2Press Aunder Alert.Ready to Alert appears
on the display.
3Press the PTT button until Alert Successful
appears on the display.
Note: If the alert is not successful, this may
meanthepersonyouaretryingtoreachis
on a call or has the phone turned off.
Receiving Call Alerts
When you receive a call alert, you must answer,
queue, or clear it. You cannot receive phone calls
or Private calls until you do.
To answer a call alert:
PressthePTTbuttontomakeaPrivatecallto
the sender.
To queue a call alert:
Press Aunder Queue.
To clear a call alert:
Press O.-or-
Press Aunder Clear.-or-
If the flip is closed, press ..
Note: The recent calls list also stores call alerts
you have received. They appear as
Private calls. Call alerts remain in your
recent calls list until you delete them or
until they reach the end of the list.
Using the Call Alert Queue
When you queue a call alert, it remains in the call
alert queue until you make a Private call to the
senderordeleteit.
23
Using the Call Alert Queue
Viewing Call Alerts
1From the main menu, select Call Alert.
2Scroll through the list.
Viewing Date and Time
To view the date and time a call alert was received:
1From the main menu, select Call Alert.
2Select the call alert you want information on.
Responding to Call Alerts in the
Queue
After you queue a call alert, you can respond to it
by making a Private call to the sender or sending a
call alert to the sender.
Making a Private Call to the Sender
1From the main menu, select Call Alert.
2Scrolltothecallalertyouwanttorespondto.
3PressthePTTbuttontobeginthecall.
This removes the call alert from the queue.
Sending a Call Alert to the Sender
1From the main menu, select Call Alert.
2Scrolltothecallalertyouwanttorespondto.
3Press Aunder Alert.Ready to Alert appears
on the display.
4Press the PTT button until Alert Successful
appears on the display.
Deleting Call Alerts
To delete a call alert from the queue:
1From the call alert queue, scroll to the call alert
you want to delete.
2Press m.
3Select Delete.
4Press Oor press Aunder Yes to confirm.
To delete all call alerts from the queue:
1From the call alert queue, press m.
2From the call alert menu, select Delete All.
3Press Oor press Aunder Yes to confirm.
Sorting Call Alerts
Tip: Youmusthaveatleastonecallalertinthe
queue to access this feature.
To sort call alerts by the order they were received:
1From the main menu, select Call Alert.
2Press m.
3Select Sort By.
4Select First on Top or Last on Top.
24
Recent Calls
The recent calls list stores information associated
with calls you have made and received and call
alerts you have received. It also stores My Info and
contact information sent to you from other phones.
The recent calls list stores up to 20 items.
Calls and Call Alerts
The recent calls list stores the numbers of up to 20
of the most recent calls you have made and
received.
If the number of a recent call is stored in Contacts,
the following information appears:
•The name assigned to the number
•The picture assigned to the number, if your
phone is set to show pictures on the recent calls
list. See “Choosing Picture View or List View” on
page 26.
•The Contacts type icon associated with the
number. If the Contacts entry containing the
number has more than one number or address
stored, <> surrounds the Contacts type icon. For
information on Contacts types, see page 29.
The Private ID Contacts type icon appears when
you receive a Private call or call alert, even if the
number is not stored in Contacts.
Call alerts you have received appear as Private
calls. Like all items in the recent calls list, they
remain listed until you delete them or until they
reach the end of the list.
For phone calls, an additional icon appears giving
information about the call:
When you select a call to view its details, you see
information such as the name associated with the
call, the number, date, time, and duration of the
call.
My Info From Other Phones
The recent calls list stores My Info from other
phones. See “Sending My Info and Contact
Information” on page 76.
XA call you made.
WA call you received.
VA missed call. Missed calls appear on the
recent calls list only if you have Caller ID.
25
Contact Information From Other Phones
This icon jappears with My Info from other
phones on the recent calls list, along with the
Private ID of the person who sent the information.
When you select My Info from other phones to view
its details, you see all the information sent.
If you receive My Info from the same phone more
than once, only the most recently sent version
appears in the recent calls list.
Contact Information From
Other Phones
The recent calls list stores contact information sent
from other phones. This information comes from
the other phone’s Contacts list or recent calls list.
See “Sending My Info and Contact Information” on
page 76.
This icon dappears with contact information on
the recent calls list.
Contact information in the recent calls list displays:
•The name contained in the contact information
•The Contacts type icon associated with the
number or address contained in the contact
information. If the item contains more than one
number or address stored, <> surrounds the
Contacts type icon.
The name or Private ID of the person who sent the
contact information appears as a separate item on
the recent calls list, above the information sent. If
onepersonsendsyoumorethanoneitemof
contact information, all the items appear below the
person’s name or Private ID.
When you select contact information to view its
details,youseethenameorPrivateIDorthe
person who sent the information and all the
information in the item.
If you receive contact information with the same
name from the same phone more than once, only
the most recently sent version appears in the
recent calls list.
Viewing the Recent Calls List
With the Flip Open
1From the main menu, select Recent Calls.
2Scroll through the list.
To view the details of an item on the list:
From the recent calls list, select the item you
want information on.
Tip: To view the details of more items, keep
scrolling.
26
Recent Calls
With the Flip Closed
1Press ..
2If you want to view the rest of the recent calls
list, press the volume controls.
3Press .to dismiss the recent calls list.
Choosing Picture View or List View
You can set your phone to show the picture
associated with each item as you view the recent
calls list or show the list without pictures.
1From the recent calls list, press m.
2Select Recent Calls View.
3Select List View to show the recent calls list
without pictures. -or-
Select Picture View to show the picture
associated with each entry.
Storing Items to Contacts
1From the recent calls list, scroll or select to the
itemyouwanttostore.
2Press Aunder Store.-or-
If Store is not one of your options: Press m.
Select Store or Update Contacts.
Tip: If the item you want to store is a call, Store
does not appear if the number is already
stored in Contacts.
3To store the item as a new entry, select [New
Contact].-or-
To store the number to an existing entry, select
the entry.
Note: StoringMyInfoorcontactinformation
from another phone or to a Contacts entry
that has a name assigned to it does not
change the name of the Contacts entry.
4If the item you want to store is a call, you must
assign a Contacts type to the number:
With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
5If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 30.
6Press Aunder Save.
Deleting Items
To delete an item from the recent calls list:
1From the recent calls list, scroll to or select the
item you want to delete.
27
Making Calls From the Recent Calls List
2Press Aunder Delete.-or-
If Delete is not one of your options: Press m.
Select Delete.
3Press Oor press Aunder Yes to confirm.
To delete all items on the recent calls list:
1From the recent calls list, press m.
2Select Delete All.
3Press Oor press Aunder Yes to confirm.
Making Calls From the Recent
Calls List
With the Flip Open
1From the main menu, select Recent Calls.
2Scroll to the item containing the number you
want to call.
•Ifyouscrolltoacall,youcanmakeacallto
the number that made the call. If the number
is stored in Contacts, you can make a call to
any of the numbers stored with it.
•If you scroll to My Info from another phone,
youcanmakeacalltothePrivateIDofthe
phone that sent the information.
•Ifyouscrolltocontactinformationfrom
another phone, you can make a call to any of
the numbers in the contact information.
3To place the call now, go to step 4. -or-
Scroll left or right to display the Contacts type for
the number you want to call.
4To make a phone call, press s.-or-
To make a Private call, press the PTT button.
You can also make calls while viewing the details
of an item on the recent calls list:
1From the recent calls list, select the item
containing the number you want to call.
•If you select a call or contact information from
another phone, you can make a call to the
number shown first on the details screen.
•If you scroll to My Info from another phone,
youcanmakeacalltothePrivateIDofthe
phone that sent the information.
2To make a phone call, press s.-or-
To make a Private call, press the PTT button.
With the Flip Closed
1Press .to display the most recent call.
2Press the volume controls to scroll to the name
or number you want to call.
•Ifyouscrolltoacall,youcanmakeacallto
the number that made the call.
28
Recent Calls
•If you scroll to My Info from another phone,
youcanmakeacalltothePrivateIDofthe
phone that sent the information.
•Ifyouscrolltocontactinformationfrom
another phone, you can make a call to the
number currently displayed.
3To make a phone call, press ton the top of
your phone. -or-
To make a Private call, press the PTT button.
29
Contacts
Contacts stores up to 600 numbers or addresses.
Each Contacts entry can store several numbers or
addresses.
InformationstoredinContactsissavedonyour
SIM card.
A Contacts entry contains:
•A name — A name is required if you are storing
more than one number or address to the entry;
otherwise, it is optional. Typically, this is the
name of the person whose contact information is
stored in the entry.
•Aringtone—Thisisthesoundyourphone
makes when you receive phone calls or call
alerts from any of the numbers stored in the
entry. You can assign the ring tone from your list
of ring tones. If you do not assign a ring tone, the
entry is created with a default ring tone
assigned.
•A picture — This picture appears on the display
when you receive phone calls from any of the
phone numbers stored in the entry. You can
assign the picture from the pictures stored in the
mediacenter.Ifyoudonotassignapicture,the
entry is created with no picture assigned.
•A Contacts type — Each number or address
stored must be assigned a Contacts type:
•A number or address — Each Contacts entry
must contain a number or address. This may be
any type of phone number, Private ID, Talkgroup
number, email address, or IP address.
AMobile phone number
BPrivate Private ID
CWork1 phone number
DWork2 phone number
EHome phone number
FEmail email address
GFax phone number
HPager phone number
ITalkgroup Talkgroup number
JIP IP address
KOther phone number
30
Contacts
Note: You can store numbers up to 64 digits
long, but every 20 digits must be
separated by a pause or wait. See
“Creating Pauses and Waits” on page 35.
•A Speed Dial number — When you store a
phone number, it is assigned a Speed Dial
number. You can accept the default Speed Dial
number or change it.
•A voice name — If you create a voice name for a
number, you can then dial that number by saying
the voice name into your phone. This icon P
appears to the left of the Contacts type icon if a
voice name is assigned.
Accessing Contacts
From the main menu, select Contacts.-or-
Ifyouareonacall:Pressm. Select Contacts.
Creating Entries
A number or address and a Contacts type are
required for all Contacts entries. Other information
is optional. You may enter the information in any
order by scrolling through the entry details.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press Aunder Save to save the entry to
Contacts.
To cancel a Contacts entry at any time, press eto
return to the idle screen.
To create a Contacts entry:
1To access the entry details screen:
Select Contacts > [New Contact].-or-
From the Contacts list, press m. Select New.
2Ifyouwanttoassignanametotheentry:
Select Name.
Enter the name. See “Entering Text” on page
53. When you are finished, press O.
Tip: Press Aunder Browse to select a name
already in Contacts.
3If you want to assign a ring tone or picture to the
entry, select [Ring Tone/Picture].See
“AssigningaRingToneorPicture”onpage31.
4ToassignaContactstypetothenumberor
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
5To store a number or address:
Select the #field (or ID for an email address, or
IP for an IP address).
31
Creating Entries
Enter the number or address. For phone
numbers, use the 10-digit format. For email
addresses, see “Entering Text” on page 53.
Tip: Press Aunder Browse to select a number
or address from Contacts, the recent calls
list, or Memo.
When you are finished, press O.
6If you want to change the default Speed Dial
numberoracreateavoicenamefortheentry,
select [Options]. See “Assigning a Speed Dial
Number or Voice Name”.
7If you want to add more numbers or addresses
to the entry:
Scroll past the information you already entered.
Enter the additional information for the entry
using step 3 through step 6. You must assign a
name to the entry, if you have not already.
8Press Aunder Done.
Assigning a Ring Tone or Picture
1Ifyouhavenotalready,select[Ring
Tone/Picture].
2If you want to assign a ring tone from the list of
ring tones:
With Ringer highlighted, scroll left or right to
choosearingtone.-or-
Select Ringer. Select the ring tone you want to
assign.
3Ifyouwanttoassignapicturefromthemedia
center:
Scroll to Picture. Scroll left or right to choose a
picture. -or-
Select Picture. Select the picture you want to
assign.
Only pictures that can be assigned to Contacts
entries are displayed. Some large pictures
cannot be assigned.
Tip: If an entry has a picture assigned and you
want the entry to have no picture, select
[No Picture] or press Aunder Unassign.
4When you are finished, press Aunder Back.
Assigning a Speed Dial Number or
Voice Name
1Ifyouhavenotalready,select[Options].
2The default Speed Dial number assigned to a
phone number is displayed in the Speed # field.
This is always the next available Speed Dial
location.
32
Contacts
Ifyouwanttoassignthephonenumbertoa
different Speed Dial location:
With the Speed # field highlighted, press O.
Press Aunder Delete to delete the current
Speed Dial number.
Enter the new Speed Dial number using the
keypad.
When you are finished, press O.
3If you want to create a voice name for a phone
number, select Voice Name.
As directed by the screen prompts, say and
repeat the name you want to assign to the
number. Speak clearly into the microphone.
4When you are finished, press Aunder Back.
Storing Numbers Faster
To store numbers to Contacts from the recent calls
list, see “Storing Items to Contacts” on page 26.
To store numbers to Contacts from Memo, see
“Memo” on page 49.
To store numbers to Contacts from the idle screen:
1Use the keypad to enter the number you want to
store.
2Press m.
3Select Store Number.
4To store the number as a new entry, select [New
Contact].-or-
To store the number to an existing entry, select
the entry.
5With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
6If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 30.
7Press Aunder Done.
Editing Entries
1From the Contacts list, scroll to or select the
entry you want to edit.
2Press Aunder Edit.-or-
If Edit is not one of your options: Press m. Select
Edit.
The entry details screen displays.
3Follow the applicable instructions in “Creating
Entries” on page 30 to edit the various fields.
33
Viewing Entries
Viewing Entries
When you view Contacts entries, you can choose
how much detail you want to see.
Viewing the Contacts List
In this view, each entry shows:
•Thenameassignedtotheentry
•Asmallversionofthepictureassigntotheentry,
if you have set Contacts to show pictures in the
Contacts list. See “Choosing Picture View or List
View” on page 34.
•The types of numbers and addresses stored in
the entry
To view entries from the Contacts list:
1Access Contacts.
2Scroll to view entries.
Tip: To find Contacts entries faster, use the
keypad to enter the first letter of the name.
3If an entry has more than one number or
address stored, <> surrounds the Contacts type
icon. Scroll left or right to view the icon for each
number stored in the entry.
SelectinganEntry
In this view, each entry shows:
•Thenameassignedtotheentry
•A small version of the picture assign to the entry
•The name of the ring tone assign to the entry
•The numbers and addresses stored in the entry
To select an entry:
1From the Contacts list, select the entry you want
to view.
2Scroll to view the numbers and addresses
stored in the entry.
Tip: To select other entries: Scroll left or right.
Or, press #or *.
To return to the Contacts list, press Aunder Back.
Viewing More Details
When an entry is selected, you can view more
details about the entry by selecting items within the
entry.
Viewing Details of a Number or Address
1Select the entry.
2Select the number or address you want to view
details of.
34
Contacts
If the you select a phone number, you can view
its Speed Dial number and see whether it has a
voice name.
To return to the entry, press Aunder Back or
press O.
Viewing a Large Picture
To view a large version of the picture assigned to
an entry:
1Select the entry.
2Select the first item shown on the entry screen.
This item shows the name assigned to the entry
or No Name.
Note: You cannot make calls from this view.
To return to the entry, press Aunder Back or
press O.
Choosing Picture View or List View
You can set Contacts to show the picture assigned
to each entry as you view the Contacts list or show
the Contacts list without pictures.
1From the Contacts list, press m.
2Select Contact View.
3Select List View to show the Contacts list
without pictures. -or-
Select Picture View to show the picture
assigned to each entry.
Searching for a Name
To search for a name in Contacts:
1From the Contacts list, press Aunder Search.
-or-
If Search is not one of your options: Press m.
Select Search.
2Enter the name you want to see. See “Entering
Text”onpage53.
3Press O.
Your phone finds the name you entered or the
nearest match.
Showing Only Private IDs and
Talkgroups
To set Contacts to show only entries that contain
Private IDs and Talkgroup entries:
1From the Contacts list, press m.
2Select Filter.
3Set this option to Show Prvt/Grp.
35
Deleting Entries
To set Contacts to show all entries:
1From the Contacts list, press m.
2Select Filter.
3Set this option to Show All.
Deleting Entries
Delete an Entry
1From the Contacts list, scroll to or select the
entry you want to delete.
2Press m.
3To delete the entire entry, select Delete
Contact.
4Press Oor press Aunder Yes to confirm.
Delete a Number or Address
1From the Contacts list, scroll to the entry that
contains the number or address you want to
delete.
2Scroll left or right to display the Contacts type for
the number you want to delete. -or-
Select the entry. Scroll to or select the number
you want to delete.
3Press m.
4Select Delete Number.
5Press Oor press Aunder Yes to confirm.
Note: If an entry contains only one number or
address, deleting the number or address
deletes the entry.
Checking Capacity
To see how many numbers are stored in Contacts:
1From the Contacts list, press m.
2Select Capacity.
Creating Pauses and Waits
When storing a number, you can program your
phone to pause or wait between digits while
dialing. A pause makes your phone pause for 3
seconds before dialing further. A wait makes your
phone wait for your response before dialing further.
This feature is useful when using voice mail or
other automated phone systems that require you to
dial a phone number and then enter an access
number.
To program a pause:
Press and hold *until the letter P appears.
The P represents a 3-second pause.
If you store 17035551235P1234, when you select
this number and make a call, your phone dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
36
Contacts
If you want a pause longer than 3 seconds, press
and hold *more than once. Each P represents a
3-second pause.
To program a wait:
Press and hold *until the letter W appears.
The W means your phone waits before dialing
further.
If you store 17035551235W1234, when you select
this number and make a call, your phone dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits.
Press Aunder Yes to dial the last 4 digits.
Tip: You can create pauses and waits while
dialing a number from the keypad. See
“Creating Pauses and Waits While Dialing”
on page 42.
International Numbers
Note: This feature may not be offered by your
service provider.
When storing a number that you plan to use for
international calls, use Plus Dialing:
1Press and hold 0for two seconds. A “0”
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2Enter the country code, city code or area code,
and phone number.
For information about making international calls,
see “Making International Calls” on page 42.
Making Calls From Contacts
WhileViewingtheContactsList
1Access Contacts.
2Scroll to the name or number you want to call.
Tip: To find Contacts entries faster, use the
keypad to enter the first letter of the name.
3To place the call now, go to step 4. -or-
Scroll left or right to display the Contacts type for
the number you want to call.
4To make a phone call, press s.-or-
To make a Private call, press the PTT button.
IfyouaremakingaPrivatecall,yourphoneplaces
thecalltothePrivateIDstoredintheContacts
entry, even if the Private icon is not displayed.
37
Accessing Contacts with GSM Phones
Ifyouaremakingaphonecall:
•Your phone places the call to the phone number
assigned to the Contacts type displayed.
•If the Contacts type displayed is not a phone
number, your phone places the call to the phone
number stored in the Contacts entry.
•If the Contacts type displayed is not a phone
number and you have more than one phone
number stored in the Contacts entry, your phone
prompts you to select the phone number you
want to place the call to.
After Selecting an Entry
1Access Contacts.
2Select the Contacts entry that contains the
number you want to call.
3Scroll to or select number you want to call.
4To make a phone call, press s.-or-
To make a Private call, press the PTT button.
Ifyoutrytomakeatypeofcallthatdoesnotmatch
theContactstypeofthenumberyouchose,nocall
is placed.
Accessing Contacts with GSM
Phones
Ifyouplantousetheinformationstoredin
Contacts with an i2000, i2000plus, or any other
GSM phone, download iDEN Phonebook Manager.
Go to idenphones.motorola.com/iden/support for
more information.
You can use iDEN Phonebook Manager to make
the Contacts information saved to your i860
phone’s SIM card accessible in this type of phone.
38
Call Forwarding
Call forwarding sends calls to the phone numbers
you specify. You can forward all calls to one
number or forward missed calls to different
numbers depending on the reason you missed the
call. You can forward phone lines 1 and 2
independently.
Forwarding All Calls
When you set your phone to forward all calls, an
icon appears in the top row of the display:
To forward all calls:
1From the main menu, select Call Forward >
Forward > All Calls.
2Select To.
If you specified a forwarding number for all calls
before, this number displays.
To forward calls to this number, press Aunder
Back.
To delete this number, press O,thenpressand
hold Aunder Delete.
3To enter the number you want to forward calls to:
Enter the number using your keypad. -or-
Press Aunder Search. Select Contacts,
Recent Calls,orMemo. Select the number you
want to enter.
4Press O.
All your calls are now forwarded to the number you
specified.
Turning Off Call Forwarding
If you don’t want all your calls forwarded, turn the
feature off:
1From the main menu, select Call Forward > To.
2Set this option to Off.
GPhone line 1 is active; calls to phone line 1
are being forwarded.
IPhone line 1 is active; calls to phone line 2
are being forwarded.
HPhone line 1 is active; calls to phone lines 1
and 2 are being forwarded.
JPhone line 2 is active; calls to phone line 1
are being forwarded.
LPhone line 2 is active; calls to phone line 2
are being forwarded.
KPhone line 2 is active; calls to phone lines 1
and 2 are being forwarded.
39
Forwarding Missed Calls
All your calls are now sent to your phone.
Calls you miss are forwarded according to the
options set for missed calls. By default, missed
calls are forwarded to voice mail.
Note: To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
Forwarding Missed Calls
You can specify a forwarding number for each type
of missed call:
•IfBusy— Your phone is on a call or transferring
data.
•IfNoAnswer— You do not answer on the first
4rings.
• If Unreachable — Your phone is out of
coverage or powered off.
Note: If you want a type of missed call sent to
voicemail,thecallforwardingnumberfor
that type of missed call must be your
voice mail access number.
Toforwardmissedcalls:
1From the main menu, select Call Forward >
Forward > Detailed.
2Select If Busy to specify a forwarding number
for calls received when your phone is busy.
3If you specified a forwarding number for this type
of call before, this number displays.
To forward calls to this number, press Aunder
Back andgotostep6.-or-
To delete this number, press O,thenpressand
hold Aunder Delete.
4To enter the number you want to forward this
type of call to:
Enter the number using your keypad. -or-
Press Aunder Search. Select Contacts,
Recent Calls,orMemo. Select the number you
want to enter.
5Press O.
6Repeat step 2 through step 5 for If No Answer
and If Unreachable.
7When you are finished, press Aunder Back.
Viewing Call Forwarding
Settings
1From the main menu, select Call Forward >
Forward > All Calls.
2With To highlighted, press Aunder Status.
40
Advanced Calling
Features
Call Waiting
Call Waiting lets you receive a second call while on
an active call. Call Waiting is always available,
unless you turn it off for a specific call.
Ifyouareonacallandreceiveasecondcall,your
phone emits a tone and displays a message saying
youarereceivingasecondcall.
To accept the second call and put the active call on
hold:
Press Aunder Yes.
To accept the second call and end the active call:
1Press e.
Your phone rings with the second call.
2Answer the second call.
To decline the second call:
Press Aunder No. If you subscribe to voice
mail, the call is forwarded to your voice mail box,
unless you set Call Forward for If Busy to a
different number.
Turn Off Call Waiting
To turn off Call Waiting during a call:
1Press m.
2Select In Call Setup > Call Waiting.
3Set this option to Off.
Tip: To turn Call Waiting back on while still on
the call, set this option to On.
To turn off Call Waiting for the next call you make
or receive:
1From the main menu, select Settings > Phone
Calls > Call Waiting.
2Set this option to Off.
Call Waiting is turned back on when you end the
call.
Switching Between Calls
Any time you have one call active and one call on
hold, to make the call on hold active and put the
active call on hold:
Press Aunder Switch.-or-
If Switch is not one of your options: Press m.
Select Switch.
41
Putting a Call on Hold
Putting a Call on Hold
1Whileonanactivecall,pressm.
2Select Hold.
If you want to make the call active again, press A
under Resume.
Calling 2 People
Putting a Call on Hold, Making a
Second Call
1Place or receive a phone call.
2While the call is active, press m.
3Select 2nd Call. This puts the call on hold.
4Enter the second phone number you want to
call.
Tip: For quick ways to enter the number, press
m.
5Press sto place the call.
To end the second call and make the call on hold
active again:
Press e.
Tomakethecallonholdactiveandputtheactive
call on hold:
Press Aunder Switch.
Making a 3-Way Call
1Place or receive a phone call.
2While the call is active, press m.
3Select 3Way. This puts the call on hold.
4Enter the second phone number you want to
call.
Tip: For quick ways to enter the number, press
m.
5Press sto place the call.
6Press Aunder Join.
All 3 people in the call can speak to and hear each
other.
Merging 2 Calls into a 3-Way Call
You can combine 2 phone calls into a 3-way call
any time you have a call on hold and a call active:
1Press m.
2Select Join.
All 3 people in the call can speak to and hear each
other.
42
Advanced Calling Features
Creating Pauses and Waits
While Dialing
You can enter a pause or wait while dialing a
number. For more information on pauses and
waits, see “Creating Pauses and Waits” on page
35.
To create a pause while dialing a phone number:
1From the keypad, enter the digits you want to
occur before the pause.
2Press m.
3Select Insert Pause.
4Enter the digits you want to occur after the
pause.
To create a wait while dialing a phone number:
1From the keypad, enter the digits you want to
occur before the wait.
2Press m.
3Select Insert Wait.
4Enter the digits you want to occur after the wait.
Making International Calls
Note: This feature may not be offered by your
service provider.
Plus Dialing lets you place an international call to
most countries without entering the local
international access code.
1Press and hold 0for two seconds. A “0”
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2Enter the country code, city code or area code,
and phone number.
One Touch PTT
One Touch PTT sets your phone to call the most
recent Private ID on the recent calls list, or a
Private ID you choose, every time you press the
PTT button.
Setting One Touch PTT
To the Most Recent Private ID
1From the main menu, select Settings > 2-Way
Radio > One Touch PTT.
2Set this option to Last Call.
43
Setting Flip Actions
TotheAnyPrivateID
1From the main menu, select Settings > 2-Way
Radio > One Touch PTT > Assigned Number.
2To enter the Private ID you want your phone to
call every time you press the PTT button:
Enter the number using your keypad. -or-
Press Aunder Search. Select Contacts,
Recent Calls,orMemo. Select the number you
want to enter.
Tip: If you are entering a Talkgroup number,
enter # before the number.
3Press O.
Turning Off One Touch PTT
1From the main menu, select Settings > 2-Way
Radio > One Touch PTT.
2Set this option to Off.
Setting Flip Actions
For Answering Calls
To set your phone to answer calls when you open
the flip:
1From the main menu, select Settings > Phone
Calls > Flip Activation > Flip to Ans.
2Set this option to On.
To set your phone not to answer calls when you
open the flip:
Set Flip to Ans to Off in step 2.
For Ending Calls
To set your phone to end calls when you close the
flip:
1From the main menu, select Settings > Phone
Calls > Flip Activation > Flip to End.
2Set this option to On.
To set your phone not to end calls when you close
the flip:
Set Flip to End to Off in step 2.
Note: Ifyouareusingyourphonewitha
headset, and you have the Flip to End
option set to On, closing your flip sends
incoming sound to the headset and does
not end the call.
44
Advanced Calling Features
Group Calls
A group call is similar to a Private call, but is made
to all members of a Talkgroup at once.
Before you can make or receive group calls, a
Talkgroup must be established. After the Talkgroup
is established, you must join the Talkgroup.
Joining a Talkgroup
Your sales representative or your service provider
establishes Talkgroups for you and assigns each
Talkgroup a Talkgroup number. You can choose a
name for each of your Talkgroups when you create
entries for them in Contacts.
To receive group calls made to any of these
Talkgroups, you must join the Talkgroup.
1Press Aunder Contcs.-or-
From the main menu, scroll to Contacts and
press O.
2Scroll to the Talkgroup you want to join.
3Press Aunder Join.
Note: You can only monitor one Talkgroup at a
time.
Making Group Calls
1Press #. Then enter the Talkgroup number
using the keypad. -or-
Choose the Talkgroup name from Contacts or
recent calls list.
2Proceed as if making a Private call.
Receiving Group Calls
To answer a group call:
Proceed as if answering a Private call. Only one
person at a time may speak on a group call.
The Private ID or name of the person who is
speaking will appear on the display below the
Talkgroup number.
TurningoffGroupCalls
To set your phone to prevent you from hearing
group calls to your Talkgroup:
1From the main menu, select Settings > 2-Way
Radio > Tkgrp Silent.
2Set this option On.
To set your phone to let you hear group calls to
your Talkgroup:
Set Tkgrp Silent to Off in step 2.
45
Call Timers
Call Timers
Call timers measure the duration of your phone
calls, Private or group calls, and circuit data use,
as well as the number of Kilobytes sent and
received by your phone:
•LastCall— displays the duration of your most
recent phone call.
• Phone Reset — keeps a running total of your
phone call minutes, until you reset it.
• Phone Lifetime — displays the total minutes of
all your phone calls.
• Prvt/Grp Reset — keeps a running total of all of
your Private and group call minutes, until you
reset it.
• Prvt/Grp Lifetime — displays the total minutes
of all your Private and group calls.
• Circuit Reset — keeps a running total of all of
your circuit data use, until you reset it.
• Circuit Lifetime — displays the total minutes of
all of your circuit data use.
• Kbytes Reset — keeps a running total of the
number of Kilobytes sent and received by your
phone, until you reset it.
To view or reset a timer:
1From the main menu, select Call Timers.
2Select the feature you want to view or reset.
3To view a feature without resetting: Press O
when you are finished viewing. -or-
To reset a feature: Press Aunder Reset.Press
Oor press Aunder Yes to confirm.
Note: The values displayed by Call Timers
should not be used for billing. Call timers
are estimates only.
Using Your Phone as a Modem
Note: This feature may not be offered by your
service provider.
To use your phone as a modem with a laptop,
handheld device, or desktop computer:
1Open the connector cover.
connector
cover
46
Advanced Calling Features
2With the phone’s display facing up, insert the
data cable’s connector into the accessory
connector, until you hear a click.
3Insert the data plug into the data port of the other
device.
When used as a modem, your phone has these
data transfer modes:
•Circuit data — used for sending and receiving
faxes and for transferring large files
•Packet data — used for small file transfers such
as email
To use these services, you must install the iDEN
Wireless Data Services software (available
separately). For more information on setting up
your computer and your i860 phone for packet and
circuit data calls, refer to the Wireless Data
Services User’s Guide or contact your service
provider.
Making TTY Calls
Note: This feature may not be offered by your
service provider.
To use your phone to make phone calls using a
teletypewriter (TTY) device:
1Connect one end of a 2.5mm cable into the
audio jack on your phone. Connect the other
endofthecabletoyourTTYdevice.
2Make sure that your phone’s TTY feature is on
and select the TTY mode you want to use.
3Use your phone to enter phone numbers and
make calls.
When you make a TTY call, these icons appear on
the phone’s display:
NPhone call is active.
OPhone call is on hold.
47
Making TTY Calls
TTY device features such as Turbo-Code,
High-Speed, and Interruption are not supported by
your phone. These features must be turned off or
disabled to use your TTY device with your phone.
TurningOntheTTYFeature
Your phone’s TTY feature must be on if you want
to make TTY calls, set the TTY mode, or change
the TTY baud rate. To make sure the TTY feature
is on:
From the main menu, select Settings > Phone
Calls > TTY > Use TTY. This field must say On.
Choosing a Mode
Your phone supports these TTY modes:
• TTY — You type and read text on your TTY
device.
•VCO(Voice-Carry-Over) — You speak into your
phone and read text replies on your TTY device.
• HCO (Hearing-Carry-Over) — You type text on
your TTY device and listen to voice replies on
your phone speaker.
To change mode while not in a call:
1From the main menu, select Settings > Phone
Calls > TTY > Type.
2Select the TTY mode you want.
When you make a TTY call, the call begins in the
TTY mode you last selected.
To change mode during a call using your phone:
1Press m.
2Select In Call Setup > TTY > Type.
3Selectthemodeyouwant.
To change mode during a call using your TTY
device, issue one of the following commands:
•“VCO please” — to select VCO mode
•“HCO please” — to select HCO mode
•“HCO off please” — to turn off HCO mode
Important: When you are using HCO, the sound
coming from your phone speaker may
be uncomfortably loud. Use caution
when putting the phone to your ear.
(For information on setting the volume
of your phone speaker, see “Setting the
Volume” on page 104.)
Changing the TTY Baud Rate
By default, your phone’s TTY baud rate is set to
45.45, the baud rate required for TTY calls within
the U.S. To make calls outside the U.S., set your
TTYbaudrateto50.0.
48
Advanced Calling Features
To change the TTY baud rate:
1From the main menu, select Settings > Phone
Calls > TTY > Baud.
2Selectthebaudrateforyourlocation.
49
Memo
Memoletsyoustoreanumber,makeacalltothat
number, and save it to Contacts.
To create a memo:
1From the main menu, select Memo.
2Enter the number using your keypad.
3Press O.
Toviewthememolater:
1From the main menu, select Memo.
To delete the memo:
1From the main menu, select Memo.
2Press and hold Aunder Delete.
3Press O.
To edit the memo:
1From the main menu, select Memo.
2Enter the new number.
3Press O.
To make a call to the memo number:
1From the main menu, select Memo.
2To make a phone call, press s.-or-
To make a Private call, press the PTT button.
To store the memo number to Contacts:
1From the main menu, select Memo.
2Press m.
3Select Store to Cntcs.
4To store the number as a new entry, select [New
Contact].-or-
To store the number to an existing entry, select
the entry.
5With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
6If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 30.
7Press Aunder Done.
50
Ring Tones
To set the ring tone your phone makes when you
receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT, or
Datebook reminders:
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Scroll through the list of ring tones and select the
one you want to assign. Vibrate sets your phone
to vibrate instead of making a sound; Silent sets
your phone to neither vibrate nor make a sound.
Tip: Highlighting a ring tone lets you hear it.
4Select the features you want to assign the ring
tone to.
5When you are finished, press Aunder Done.
Note: This icon Mappears on the display if you
set your phone to neither vibrate nor make
a sound for phone calls.
Setting Your Phone to Vibrate
You can set your phone to vibrate instead of
making a sound when you receive all phone calls,
Private calls, group calls, call alerts, message
notifications, pictures sent using Send via PTT,
and Datebook reminders.
1From the main menu, select Ring Tones >
VibeAll.
2Set this option to On.
Tip: Pressing the volume controls to turn down
the volume as far as possible sets VibeAll
to On.
To set your phone to vibrate instead of making a
sound for some features but not others:
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Select Vibrate from the list of ring tones.
4Select the features you want to set to make no
sound.
5When you are finished, press Aunder Done.
Note: To set ring options for Private calls and
group calls, see “Setting Your Phone to
Vibrate” on page 104.
51
Ring and Vibrate
These icons indicate how the ringer is set.
These icons may appear at the same time.
Ring and Vibrate
To set your phone to ring and vibrate when you
receive phone calls or call alerts:
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Scroll through the list of ring tones and highlight
theoneyouwanttoassign.
4Press m.
5Select Assign w/Vibe.
6Select the features you want to set to ring and
vibrate.
7When you are finished, press Aunder Done.
This icon Sappears on the display.
Assigning Ring Tones to
Contacts
You can set the ring tone your phone makes when
you receive phone calls or call alerts from
someone you have stored in Contacts.
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Scroll through the list of ring tones and select the
one you want to assign.
4Select AContact.
5Select the Contacts entry you want to assign the
ring tone to.
Note: You can assign some ring tones to
Contacts from the media center as well.
See “Assigning to Contacts” on page 70.
Viewing Ring Tone
Assignments
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Highlight any ring tone.
4Press m.
5Select Overview.
QThe phone always vibrates instead of making
a sound.
RThe phone vibrates instead of making a
sound for phone calls.
uGroup calls and Private calls are heard
through the earpiece, not the speaker.
52
Ring Tones
6Scroll to view ring tones assigned to features
and Contact entries.
Downloading More Ring
Tones
Ifyouwanttouseotherringtones,youcan
download them into your phone for a fee. Go to
www.motorola.com/idenupdate for a selection of
custom ring tones and downloading instructions.
Note: Ring tones purchased from this web site
may be downloaded only once. If you
delete a ring tone from your phone, you
must purchase it again to download it
again.
Managing Memory
To view the amount of memory available for
custom ring tones:
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Highlight any ring tone.
4Press m.
5Select Memory Usage.
Deleting custom ring tones frees memory.
Note: Ring tones are stored in your phone using
the same memory space used to store
messages, Java application data, items
accessible through the media center, and
voice records created when your phone is
in a call. Deleting some of these other
items frees memory for ring tones.
Deleting Custom Ring Tones
Deleting a ring tone from the list of ring tones
deletes it from all parts of your phone, including the
media center and Contacts.
To delete a custom ring tone:
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Scroll to the ring tone you want to delete.
4Press m.
5Select Delete.
6Press Aunder Yes to confirm.
53
Entering Text
You can enter text, numbers, and symbols into
your phone using Alpha, Word, Numeric, or
Symbol text input modes.
When you access a screen that requires you to
enter text, you start in the mode last used.
To choose a text input mode:
1At a screen that requires you to enter text, press
m.
2Select the text input mode you want to use. A
checkmark appears next to the current mode.
Using Word Mode
In Word mode, T9 Text Input analyzes the letters
on the keypad button you press and arranges them
to create words. As you type, T9 Text Input
matches your keystrokes to words in its database
and displays the most commonly used matching
word. You can add you own words to this
database.
Entering a Word
1Select Word as your text input mode.
2Typeawordbypressingonekeyforeachletter.
For example, to type “test” press 837
8.
The displayed word may change as you type it.
Do not try to correct the word as you go. Type to
the end of the word before editing.
3If the word that appears is not the desired word,
press 0to change the word on the display to
the next most likely word in the database.
Repeat until the desired word appears.
If the desired word does not appear, you can add it
to the database.
lAlpha — Press a key several times for each
character.
jWord — Press a key once for each letter
while words likely to be the one you want are
chosen from a database.
iSymbols — Enter punctuation and other
symbols.
kNumeric — Enter numbers.
54
Entering Text
Adding Words to the Database
1Select Alpha as your text input mode.
2Type the word using Alpha mode.
3Select Word as your text input mode.
4Press #.
ThewordyoutypedinAlphatextentrymodeis
now in the database.
Note: You cannot store alphanumeric
combinations, such as Y2K.
Choosing a Language
To change the language of the database:
1At a screen that requires you to enter text, press
m.
2Select Languages.
3Select the language you want for your database.
Special Function Keys
Some of the phone’s keys assume different
functions while in Alpha or Word mode.
Spaces
Press #for a space.
Capitalization
When you press and hold the #key, it acts as a
3-way toggle. Press and hold #to make the next
letter typed uppercase (shift), to make all
subsequent letters typed uppercase (caps lock), or
to go back to lowercase letters.
These icons appear in the top row of your display:
When neither of these icons appear, letters typed
are lowercase. Scrolling up after typing a letter
makes that letter uppercase.
Note: Your phone automatically makes the first
letter of a sentence uppercase.
Punctuation
Press 1or 0to insert punctuation. Continue to
press the key to view the list of symbols available
through that key. Pause to select the symbol you
want.
Note: Additional punctuation symbols are
available in Symbols mode.
mor XShift is on.
nor WCaps lock is on.
55
Messages
You can receive the following types of messages
on your phone:
•Voice mail messages
•Short Message Service (SMS) text messages
•Depending on your service provider, you may
have the option to receive fax mail and Net
alerts.
You have 2 ways to access the messages you
receive:
•Respond to the message notification that
appears when the message is received.
•Dismiss the message notification and access
the message later through the message center.
You can listen to or view these messages, delete
them, or continue to store them in the message
center.
Message Notifications
When you receive a message, your phone notifies
youwithtextonthedisplayandanotificationtone
or vibration. You can access the message or
dismiss the notification.
If you dismiss the notification, the message is not
deleted. It can be accessed through the message
center.
If you are not on a phone call when you receive a
message, your phone sounds a notification tone
every 30 seconds until you access the message,
you dismiss the notification, or the alert time-out
expires.
Setting Notification Options
To control whether your phone sounds message
notification tones while you are on phone calls:
1From the main menu, select Settings > Phone
Calls > Notifications.
2Select the option you want:
• Receive All — Tones sound during calls for
all types of messages.
•MsgMailOnly— Tones sound during calls
for SMS messages; tones for all other types
of messages are held until you end calls.
• Delay All — Tones for all types of messages
are held until you end calls.
Tip: To set notification options during a call:
Press m. Select In Call Setup >
Notifications.
56
Messages
Message Center
The message center manages your messages.
All your messages are stored in the message
center. The message center shows how many
messages you have of each type.
To access your messages through the message
center:
1From the main menu, select Messages.
2Scrolltothetypeofmessageyouwantto
access.
3Press Oor press Aunder the display option on
the left.
57
Voice Mail Messages
Note: To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
Receiving a Message
When you receive a voice mail message, New
Voice Mail Message appears on the display.
To call your service provider’s voice mail system
and listen to the message:
Press Aunder Call.
To dismiss the message notification:
If the flip is closed, press ..-or-
If the flip is open, press Oor press Aunder
Back, or close the flip.
If the caller leaves a message, this icon y
appears on the display, reminding you that you
have a new message.
Accessing Voice Mail From
the Message Center
From the main menu, select Messages > Voice
Mail.
Sending Unanswered Calls to
Voice Mail
To send a phone call to voice mail instead of
answering it:
If the flip is closed, press ..-or-
Press e.-or-
Press Aunder No.
58
MOSMS Messages
Note: This feature may not be offered by your
service provider.
If your service provider offers MOSMS, your phone
sends SMS messages using MOSMS and receives
SMS messages from other phones that are using
MOSMS.
Setting Up
Before you begin using MOSMS, you may need to
set up your signature, service center number, and
expiration information:
1From the main menu, select Messages.
2Scroll to Text Inbox.
3Press m.
4Select Text Msg Setup.
5Select Signature.
Enter your signature. It may be up to 11
characters long. See “Entering Text” on page
53. When you are finished, press O.
6Select Srvc Cntr No.
Enter the phone number of your service center.
If you do not know this number, contact your
service provider.
When you are finished, press O.
7Select Expire After.
This is the amount of time messages you send
are saved at the service center if they cannot be
delivered. After this period, they are discarded.
Scroll to select the number of days you want
your messages to be saved.
When you are finished, press O.
8Select Auto Clean Up. Set this option to On if
you want your phone to delete sent messages.
If you set Auto Clean Up to On,selectClean
Up After to set the number of days after which
sent messages are deleted or the number of
messages to be kept.
9Press Aunder Done to save the information
you entered.
Receiving a Message
To view the message:
Press Aunder Read.
To dismiss the message notification:
If the flip is closed, press ..-or-
If the flip is open, press Aunder Exit or close
the flip.
59
Reading from the Message Center
If your phone is powered off when you receive a
text message, your phone notifies you the next
time you power it on. If you are out of your
coverage area, your phone alerts you when you
return to your coverage area.
Tip: While reading a text and numeric message
that contains a phone number, you can
press sto call that number.
Reading from the Message
Center
1From the main menu, select Messages > Text
Inbox.
2Selectthemessageyouwanttoread.-or-
Press the number of the message you want to
read.
3If the message fills more than one screen, scroll
to read it.
Tip: Scrolling through one message lets you
view the next message.
4To save the message, press Aunder Ok.-or-
To reply to the message, press Aunder Reply.
-or-
To see all other choices, including forwarding
and deleting the message, calling the sender, or
storing the sender’s number in Contacts, press
m.
Creating and Sending
Messages
1From the main menu, select Messages >
[Create Message].-or-
Select [Create Message] from Text Inbox, Text
Outbox, or Drafts. -or-
Highlight Quick Notes and press Aunder
Compose.
Tip: This option is available from many
context-sensitive menus in the message
center.
2To address the message:
Use the keypad to enter the phone number of
the person you want to send the message to.
-or-
Press Aunder Browse. Select Contacts,
Recent Calls,orMemo. Select the number you
want to enter.
When you are finished, press O.
3Enter the text of the message. See “Entering
Text”onpage53.-or-
60
MOSMS Messages
To use a quick note: Press Aunder Browse.
Scroll to the quick note you want. For more
informationonquicknotes,see“UsingQuick
Notes”.
When you are finished, press O.
4If you want to send the message, press Oor
press Aunder Send.-or-
To delete the message without sending it, press
Aunder Cancel.-or-
If you want to request confirmation of delivery,
save the message as a draft, or set the sending
method, press m. Select the option you want.
Beginning Messages From the Recent
Calls List
1From the recent calls list, scroll to the name you
want to send a message to.
2If the entry has more than one phone number
stored, view the phone number you want to send
the message to.
3Press m.
4Select Compose SMS. The message is
automatically addressed to the phone number
you chose.
5Follow step 3 through step 4 of “Creating and
Sending Messages” on page 59.
Beginning Messages From the Idle
Screen
1Using the keypad, enter the number you want to
sendamessageto.
2Press m.
3Select Compose SMS. The message is
automatically addressed to the phone number
you chose.
4Follow step 3 through step 4 of “Creating and
Sending Messages” on page 59.
Using Quick Notes
Quick notes are short, pre-written text messages
that you can create, edit, and send. You can store
up to 20 quick notes. A quick note may be up to 30
characters long.
To create a quick note:
1From the main menu, select Messages > Quick
Notes > [New Note].
2Press Oor press Aunder Create.Entertext.
See“EnteringText”onpage53.-or-
To choose from pre-installed notes, select the
note you want.
Tip: For more options, including sending the
quick note, press m.
61
Creating and Sending Messages
Using Drafts
When you save a message as a draft, it is saved in
the drafts folder.
To edit a draft:
1From the main menu, select Messages >
Drafts.
2Selectthedraftyouwanttoedit.
3To edit the fields you want to change, follow
step 2 through step 4 in “Creating and Sending
Messages” on page 59.
Resending Messages
To resend a message:
1From the main menu, select Messages > Text
Outbox.
2Scroll to the message you want to resend. -or-
Press the number of the message you want to
resend.
3Press s.-or-
Press m. Select Resend.
Deleting Sent Messages
To delete a sent message:
1From the main menu, select Messages > Text
Outbox.
2Scroll to the message you want to delete.
3Press Aunder Delete.
4Press Aunder Yes to confirm.
To delete all unlocked sent messages:
1From the main menu, select Messages > Text
Outbox.
2Press m.
3Select Delete All.
4Press Aunder Yes to confirm.
Locking and Unlocking Sent
Messages
When you lock a message, it cannot be deleted
until you unlock it.
Locking a Message
1From the main menu, select Messages > Text
Outbox.
2Scroll to the message you want to lock or
unlock.
3Press m.
62
MOSMS Messages
4Select Lock.
Unlocking a Message
1From the main menu, select Messages > Text
Outbox.
2Scroll to the message you want to lock or
unlock.
3Press Aunder Unlock.
Sorting Messages
You can sort messages in your inbox by sender,
time and date, and status. You can sort messages
in your outbox by recipient, time and date, and
status.
1From the main menu, select Messages > Text
Inbox or Messages > Text Outbox.
2Highlight any messages.
3Press m.
4Select Sort and Order.
5Select Sort By to specify the sorting method.
6Select Order By to specify the sorting order.
Managing Memory
Your text inbox, outbox, and drafts folder have a
set amount of memory available for storing
messages.
The text inbox holds 20 messages. If the text inbox
is full, you cannot receive messages until you
delete some.
The outbox and drafts folder share memory space.
Together they can hold 30 messages. If the outbox
and drafts folder memory is full, you cannot send
messages or save drafts until you delete some.
To view the amount of memory available in your
text inbox:
1From the main menu, select Messages > Text
Inbox.
2Press Aunder Memory.
To view the amount of memory available in your
outbox and drafts folder:
1From the main menu, select Messages > Text
Outbox or Messages > Drafts.
2Press Aunder Memory.
63
Camera
The camera in your i860 phone takes pictures and
records video. You can save these pictures and
video in your phone and view them through the
media center.
You can send the pictures you take in Private calls,
assign them to Contacts entries, or set them as
your phone’s wallpaper.
Taking Pictures
1From the main menu, select Camera.-or-
Access the camera from the media center. See
“Accessing the Camera” on page 73. -or-
Access the camera during a Private call. See
“StartingaCallbySendingaPicture”onpage
75. -or-
If you were previously recording video: Press m.
Select Capture Picture.
2If you want to adjust the zoom, lighting, picture
quality, picture size, or a timer, set these options.
See “Setting Picture Options”.
3Aim the camera lens on the flip. Use the internal
display as the viewfinder.
4Whentheimageyouwanttocaptureisinview,
press and release Oor press and release A
under Capture. Releasing the key captures the
picture.
5To save the picture, press Oor press Aunder
Store.-or-
To discard the picture without saving it, press A
under Discard.-or-
To choose another action, see “More Actions for
Captured Pictures” on page 65.
Setting Picture Options
Whenyoutakeapicture,youcansetthezoom,
lighting, picture quality, and picture size, and set a
timer to delay capturing the picture.
To set any of these options:
1Press m.
2Select the option you want.
3Select the value you want for that option.
Tip: You can also set zoom by scrolling up and
down and set picture size by scrolling left
and right.
If you discard the picture or save it by pressing O
or by selecting Save from the context-sensitive
menu, no picture options except the timer are
changed. The timer returns to its default: Off.
64
Camera
If you choose any other action, all picture options
return to their defaults.
Zoom
The Zoom option lets you choose a closer view.
The values are:
•1X — no change
•2X — twice as large
•4X — 4 times as large
1X is the default.
Spotlight
The Spotlight option turns on the camera's
short-range spotlight to provide additional light for
close-up pictures (approximately 24 inches).
Off is the default.
Picture Quality
The Picture Quality option lets you choose the
sharpness the picture will have after it is captured.
The values are:
•Normal — no change
•Fine — higher resolution
When you receive your phone, Normal is the
default. You can choose a new default for this
option. See “Customizing the Camera” on page 66.
Pictures taken with this option set to Fine use more
memory space.
Picture Size
The Picture Size option lets you choose the size
the picture will have after it is captured.
From smallest to largest, the values are: Small,
Medium, Wallpaper, Large, and XLarge.
Ifyouplantousetheimageaswallpaper,itisbest
to select the Wallpaper size.
When you receive your phone, Medium is the
default. You can choose a new default for this
option. See “Customizing the Camera” on page 66.
Larger pictures use more memory space.
Self-Timer
The Self-Timer option lets you delay capturing the
picture for the number of seconds you choose.
If you use this option, the timer starts when you
perform step 4 in “Taking Pictures” on page 63.
The camera captures the picture after the amount
of time you chose elapses.
To turn off the timer before the picture is captured,
press Aunder Cancel.
The values are: Off, 10 seconds, 15 seconds, 20
seconds.
65
More Actions for Captured Pictures
Off is the default.
More Actions for Captured
Pictures
After you capture a picture as described in “Taking
Pictures”onpage63,youcansenditinaPrivate
call, assign it to a Contacts entry, or set it as your
phone’s wallpaper.
You can also access the media center to view and
perform actions on the pictures there.
Choosing any of these options automatically saves
the captured picture.
Sending in Private Calls
For information on sending captured pictures in
Private calls, see “Starting a Call by Sending a
Picture” on page 75.
AssigningtoContacts
1After you have captured a picture, press m.
2Select Set As Caller ID.
3To store the number as a new entry, select [New
Contact].-or-
To store the number to an existing entry, select
the entry.
Only entries that include phone numbers are
displayed. This icon gappears next to entries
that have pictures assigned.
4If you selected an entry with a picture assigned,
press Oor press Aunder Yes to overwrite the
assigned picture. -or-
Press Aunder No to return to the list of entries
without overwriting the assigned picture.
Setting as Wallpaper
1After you have captured a picture, press m.
2Select Set As Wallpaper.
Note: If you later set your wallpaper to change
automatically, the picture is included. See
“Wallpaper” on page 105.
Recording Video
The camera records videos up to 10 seconds long.
Recordingavideoissimilartotakingapicture.
1From the main menu, select Camera.-or-
Access the camera from the media center.
2Press m.
3Select Record Video.
4If you want to adjust lighting:
Press m.
66
Camera
Select Spotlighting.
Select On or Off.
5Aim the camera lens on the flip. Use the internal
display as the viewfinder.
6When you are ready to record, press and
release Oor press and release Aunder
Record. Releasing the key starts the recording.
7If you want to end the video before 10 seconds
are up, press Aunder Stop.
8To save the video, press O.-or-
To view the video without saving it, press A
under Review.-or-
To discard the video without saving it, press A
under Discard.
Accessing the Media Center
You can access the media center from the camera
at any time, except when you are or using the
Camera Setup menu or viewing the memory
screen.
1Press m.
2Select Media Center.
Customizing the Camera
The Camera Setup menu lets you customize the
camera:
• Ask for Name — If you set this option to On,
you are prompted to enter a name for each
picture before you save it. Otherwise, pictures
are automatically saved with the date and a
number as their names.
• Shutter Sound — sets the sound the camera
makesasitcapturesapicture.
Note: The volume of the shutter sound is
controlled by your phone’s speaker
volume. To set your phone’s speaker
volume, see “Setting Your Phone to
Vibrate” on page 104.
•DefaultSize— sets the default value for the
Picture Size option.
• Default Quality — sets the default value for the
Picture Quality option.
To access the Camera Setup menu:
1Access the camera.
2Press m.
3Select Camera Setup.
67
Managing Memory
Tip: This option is available from many
context-sensitive menus when you are
using the camera.
Managing Memory
While you are taking pictures or recording video,
the percentage of free memory appears on the
screen.
To view your used memory, free memory, and
memory capacity:
1Access the camera.
2Press m.
3Select Memory Usage.
Tip: This option is available from many
context-sensitive menus when you are
using the camera.
To free memory, delete items from the media
center. See “Media Center” on page 68.
68
Media Center
The media center lets you access pictures, videos,
and audio recordings.
All pictures and videos saved in your phone can be
accessed through the media center.
The following audio recordings can be accessed
through the media center:
•voice records created when your phone was not
inacall
•musical ring tones in the list of ring tones
•audio recordings you downloaded to your phone
Pictures in the media center can be sent in Private
calls using Send via PTT. See “Using Send via
PTT” on page 74.
Note: You can transfer pictures or videos from
your phone to your computer using a data
cable and software you can download. Go
to idenphones.motorola.com/iden/support
for more information.
Viewing the Media Center
To access the media center:
From the main menu, select Media Center.-or-
From the camera, press m. Select Media Center.
Scroll to view the items in the media center.
Choosing Thumbnail View or List
View
You can set the media center to show a thumbnail
of each picture as you view the list of items or show
thelistofitemswithoutthumbnails.
To change views:
1Access the media center.
2Press m.
3Select Set View.
4Select Plain List View or Thumbnail List View.
Filtering by Media Type
Youcansetthemediacentertoshowallitems,
only pictures, only videos, or only audio recordings.
Setting Filtering
1Access the media center.
2Press m.
3Select Filter.
4Select All,Pictures,Video,orAudio.
Tip: You can also scroll right or left, or press *
or #, to scroll through these options while
viewing the list of items.
69
Forward Locked Items
Keeping the Last Filter Setting
Youcansetthemediacentertoshowallitems
every time you access it or to keep the filtering
setting you had when you last viewed it.
1Access the media center.
2Press m.
3Select Setup.
4Select Remember Filter to keep the filtering
setting you had when you last viewed the media
center. -or-
Select Off to show all items every time you
access the media center.
When you receive your phone, the media center is
set to show all items every time you access it.
Accessing Items Listed
To access a picture, video, or audio recording,
select it from the list of items in the media center.
With an item selected, scroll up or down to access
the items that appeared before and after it in the
list.
SortingbyTimeorName
You can set the media center to sort items by the
time the item was created or by the name of the
item.
1Access the media center.
2Press m.
3Select Setup.
4Select Sort.
5Select By Time or By Name.
When you receive your phone, the media center is
settosortitemsbytime.
Forward Locked Items
Some items saved to the media center from Private
calls or by downloading may be forward locked.
This means you cannot send them to anyone. You
cannot remove forward locking from an item.
Forward locked items cannot be sent in Private
calls and cannot be uploaded from your phone.
Forward locked items are usually copyright
protected.
70
Media Center
When you view items in the media center, one of
these icons appears next to each forward locked
item:
When an item is locked, it cannot be deleted from
the media center. See “Locking Items” on page 72.
Locking an item has no effect on its forward
locking.
Pictures
The media center lets you view pictures, send
them in Private calls, assign them to Contacts
entries, or set them as your phone’s wallpaper.
Viewing
To view a picture, select it from the list of items in
the media center.
If your phone is set to show thumbnails, a
thumbnail of each picture appears next to the
picture in the list of items. If your phone is not set to
show thumbnails, this icon gappears next to the
picture.
To see a larger or smaller view of the picture you
are viewing:
1Press m.
2Select Zoom.
3Selectthezoomoptionyouwant.
If the picture does not fit in the display, scroll left
and right and up and down to view different parts of
the picture.
Sending in Private Calls
For information on sending stored pictures in
Private calls, see “Starting a Call by Sending a
Picture” on page 75.
Assigning to Contacts
1Scroll to or select the picture you want to assign
to a Contacts entry.
2Press m.
3Select Set As Caller ID.
4To store the number as a new entry, select [New
Contact].-or-
To store the number to an existing entry, select
the entry.
Only entries that include phone numbers are
displayed. This icon gappears next to entries
that have pictures assigned.
fForward locked.
cForward lock and locked.
71
Videos
5If you selected an entry with a picture assigned,
press Oor press Aunder Yes to overwrite the
assigned picture. -or-
Press Aunder No to return to the list of entries
without overwriting the assigned picture.
Setting as Wallpaper
1Scroll to or select the picture you want to set as
wallpaper.
2Press m.
3Select Set As Wallpaper.
Note: If you later set your wallpaper to change
automatically, the picture is included. See
“Wallpaper” on page 105.
Videos
The media center lets you play videos.
Playing
To play a video, select it from the list of items in the
media center.
This icon Vappears next to each video in the list of
items.
Tip: When viewing the list of items in the media
center, you can scroll right or left, or press
*or #, to change the type of media that
isdisplayedinthelist.
To stop the video before it has finished playing:
Press O.-or-
Press Aunder Stop.-or-
Scroll left.
To restart the video, scroll right.
Audio Recordings
The media center lets you play audio recordings
and assign them to Contacts entries.
Playing
To play an audio recording, select it from the list of
items in the media center.
This icon aappears next to each audio recording
in the list of items.
Tip: When viewing the list of items in the media
center, you can scroll right or left, or press
*or #, to change the type of media that
isdisplayedinthelist.
To stop the audio recording before it has finished
playing:
72
Media Center
Press O.-or-
Press Aunder Stop.-or-
Scroll left.
To restart the audio recording, scroll right.
When you play an audio recording, an animated
image appears on the display.
AssigningtoContacts
To assign an audio recording in the media center
as the ring tone for a Contacts entry:
1Scroll to or select the audio recording you want
to assign.
2Press m.
3Select Assign As Ringer.
4SelecttheContactsentryyouwanttoassignthe
ring tone to.
Note: You cannot assign a voice record as the
ring tone for a Contacts entry.
Renaming Items
1Access the media center.
2Scroll to or select the item you want to rename.
3Press Aunder Rename.
4Delete the item’s name and enter a new name.
5Press O.
Locking Items
Whenyoulockaniteminthemediacenter,it
cannot be deleted until you unlock it.
1Access the media center.
2Scroll to or select the item you want to lock or
unlock.
3Press m.
4Select Lock to lock the item. -or-
Select Unlock to unlock the item.
When you view items in the media center, one of
these icons appears next to each locked item:
Deleting Items
Deleting items from the media center deletes them
from all parts of your phone, including the list of
ring tones, the list of voice records, and Contacts.
Deleting an Item
1Scroll to or select the item you want to delete.
RForward locked.
cForward lock and locked.
73
Accessing the Camera
2Press m.
3Select Delete.
4Press Oor Aunder Yes to confirm.
Deleting All Items
You can delete all unlocked items currently in view,
depending media center filtering. See “Filtering by
Media Type” on page 68. If filtering is set to show
all types of media center items, all unlocked items
are deleted.
1Access the media center.
2Press m.
3Select Delete All.
4Press Oor Aunder Yes to confirm.
Accessing the Camera
You can access the camera from the media center
at any time, except when you are viewing a list of
audio recordings, playing an audio recording, or
using the Setup menu.
Select [Camera] fromthelistofitems.-or-
Press Aunder Camera.-or-
Press m. Select Camera.
Managing Memory
To view your used memory, free memory, and
memory capacity:
1Access the media center. -or-
Scroll to or select any item in the media center.
2Press m.
3Select Memory Usage.
To free memory, delete items in the media center.
Note: Items in the media center are stored in
your phone using the same memory
spaceusedtostoremessages,Java
applications data, and voice records
created when your phone is in a call.
Deleting some of these other items frees
memory for messages.
74
UsingSendviaPTT
Send via PTT lets you exchange pictures, My Info,
and contact information with other phones that
have this capability. You do this through Private
calls.
Send via PTT cannot be used during group calls.
Sending a Picture
WhenyousendapictureusingSendviaPTT,the
picture you sent appears on the display of the
phone you are engaged in the Private call with and
is saved to that phone’s media center.
Sending a Picture During a Call
You can send a picture at any time during a Private
call, whether you made or received the call*.
* Additional charges may apply.
You cannot talk or listen on a Private call while a
picture is being transmitted. Other activities, such
as taking or searching for a picture, do not prevent
you from talking or listening.
Taking a Picture to Send
Note: For more information on taking pictures,
see “Taking Pictures” on page 63.
1While in a Private call, press Aunder Camera.
2When the picture you want to capture is in view,
press Oor press Aunder Capture.
3To save the picture so you can send it, press O
or press Aunder Save.-or-
To discard the picture without sending it, press
Aunder Discard. Repeat step 2 until you
captureapictureyouwanttosend.
4Press the PTT button to send the picture.
5Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
6When prompted, press the PTT button to
resume the Private call.
Sending a Stored Picture
1While in a Private call: Press m. Select Browse
Pictures.
A list of pictures that can be included in a
message appears.
2Select the picture you want to send.
3Press the PTT button to send the picture.
4Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
5When prompted, press the PTT button to
resume the Private call.
75
Receiving a Picture
Starting a Call by Sending a Picture
You can start a Private call after you capture a
picture with the camera or by choosing a stored
picture from the media center.
To do this, you must have the Private ID and IP
address of the person you want to send to stored in
your Contacts.
1Capture a picture with the camera. See “Taking
Pictures” on page 63. -or-
From the media center, scroll to or select the
picture you want to send in a Private call.
2Press m.
3Select Send Picture via PTT.
A list of names from Contacts appears. These
names have Private IDs and IP addresses
stored.
4Select the name of the person you want to send
the picture to.
5Press the PTT button to send the picture.
6Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
7When prompted, press the PTT button to
resume the Private call.
Receiving a Picture
When someone sends you a picture using Send
via PTT, your phone emits tone or vibrates and a
message appears on the display asking you if you
want to accept the picture.
When you receive a picture, it appears every time
youareinaPrivatecallwiththepersonwhosentit
unless you delete the picture from the media
center. This occurs for the last 20 people who sent
you pictures.
Accepting a Picture
1When you see the message asking you if you
want to accept the picture, press Aunder Yes.
2Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
3When prompted, press the PTT button to
resume the Private call.
Tip: Ifyouwanttostopthetransmissionbeforeit
is finished, press Aunder Cancel.
Declining a Picture
When you see the message asking you if you
want to accept the picture, press Aunder No.
The picture is not transmitted.
76
UsingSendviaPTT
Setting Picture Capability
To turn your phone’s ability to send and receive
pictures in Private calls on or off:
1From the main menu, select Settings > 2-Way
Radio > Send via PTT.
2Select On or Off.
This setting does not affect your phone’s ability to
send and receive My Info or contact information.
Sending My Info and Contact
Information
WhenyousendMyInfoorcontactinformation
using Send via PTT, the information you sent
appears on the display of the phone you are
engaged in the Private call with. After the call, the
information appears on the recent call list of that
phone.
Sending My Info
You can control what portion of the information in
My Info is sent and whether it is sent automatically
in every Private call or only when you choose to
send it. See “Setting Sending Options” on page 79.
Tip: To send more information about yourself
than you can by sending My Info, like your
email address or fax number, create an
entry for yourself in Contacts and send that.
Sending Information During a Call
1While in a Private call, press m.
2With Send My Info via PTT highlighted, press
O.
3When Ready to Send appears on the display,
press the PTT button to send the information.
StartingaCallbySendingInformation
1From the main menu, select My Info.
2Press m.
3With Send My Info via PTT highlighted, press
O.
4Use the keypad to enter the Private ID you want
to send the information to. -or-
Press Aunder Browse. Select Contacts,
Recent Calls,orMemo. Select the number you
want to enter.
5When Ready to Send appears on the display,
press the PTT button to send the information.
77
Sending My Info and Contact Information
Sending Contact Information
You can send contact information by selecting a
Contacts entry or an item from the recent calls list.
Contacts entries that contain only addresses
cannot be sent. When Contacts entries are
received, they do not include ring tones or pictures.
These items from the recent calls list can be sent:
•Contact information sent from other phones
•CallstoorfromnumbersstoreinyourContacts
list
Sending Information During a Call
1While in a Private call, press m.
2Select Contacts or Recent Calls.
3Scroll to the Contacts entry or item in the recent
calls list you want to send.
4When Ready to Send appears on the display,
press the PTT button to send the information.
StartingaCallbySendingInformation
1From the Contacts list, scroll to or select the
entry you want to send. -or-
From the recent calls list, scroll to or select the
item you want to send.
2Press m.
3Select Send Contact via PTT.
4Use the keypad to enter the Private ID you want
to send. -or-
Press Aunder Browse. Select Contacts,
Recent Calls,orMemo. Select the number you
want to enter.
5When Ready to Send appears on the display,
press the PTT button to send the information.
Receiving My Info or Contact
Information
When you receive My Info or contact information
from another phone, an icon appears on the
display:
To view the information while still in the Private
call:
1Press m.
2Select View Contact.
You can also view My Info from other phones on
the recent calls list. See “Recent Calls” on page 24.
jMy Info.
dContact information.
78
My Info
My Info lets you view information about your phone
and send this information to other phones.
Viewing My Info
1From the main menu, select My Info.
2Scroll to see the entire screen.
TheMyInfoscreencontains:
•MyName— You can enter your name here.
•Line1and Line 2 — your phone numbers for
phone lines 1 and 2. Each number appears
when you receive your first call on that line.
•Private— Your Private ID is the number that
othersusetocontactyouusingPrivatecalls.
This number appears when you receive your
first Private call.
• Group ID — the number of the Talkgroup you
have joined.
• Carrier IP — the IP address assigned to your
service provider. This number appears when
you register for packet data services.
•IP1Addressand IP2 Address —theIP
addresses you use to access the Internet with
your phone.
• Circuit Data — the number you use if you want
to use your phone to transfer circuit data. See
“Using Your Phone as a Modem” on page 45.
You receive this number from your service
provider.
Note: If you request-equipment related
transactions on your account, your service
provider may require you to provide
specific information about your phone. By
pressing manytime while in My Info, a
submenu will appear that includes your
phone's service status, unit information,
and phone identification numbers
including IMEI, SIM ID, and Serial
Number (SN). Please be prepared to
supply the representative with this
information when requesting these types
of transactions.
Editing My Info
To edit My Info to enter or change the text that
appears in My Name:
1From the main menu, select My Info.
2Press Aunder Edit.
3Select Name.
4Enter the name you want to appear. See
“Entering Text” on page 53. When you are
finished, press O.
79
Setting Sending Options
You can also edit the information in Line 1,Line 2,
and Ckt, but your changes are only temporary. The
next time your phone registers on the network, the
your actual phone numbers and circuit data
number appear again in My Info.
Setting Sending Options
Your phone can send information in My Info to
other phones that have this capability.
You can control what portion of the information in
My Info is sent and whether it is sent automatically
in every Private call or only when you choose to
send it.
Information Sent
The information your phone sends always includes
My Name and Private.
It may include Line 1,Line 2,Carrier IP,and
Circuit Data, depending on the options provided
by your service provider and how you set your
sending options.
To change which fields are sent:
1From the main menu, select My Info.
2Press m.
3Select Send via PTT Setup > Info to Send.
4A checkmark appears next to the fields that will
be sent. To add or remove the checkmark, select
the field.
5When you are finished, press Aunder Done.
Automatic Sending
To control whether your information is sent
automatically:
1From the main menu, select My Info.
2Press m.
3Select Send via PTT Setup > AutoSend.
4To set your information to be sent automatically,
set this option to On.-or-
To set your information to be sent only when you
choose to send it, set this option to Off.
80
Voice Records
A voice record is a recording you make with your
phone and can play back. You can record notes to
yourself when your phone is not in a call or record
phone calls when your phone is in a call.
Voice records created when your phone is not in a
call can be accessed through the media center.
See “Media Center” on page 68.
Viewing Voice Records
To view your list of voice records:
1From the main menu, select VoiceRecord.
2Scroll to view more voice records.
Voice Records Icons
One of these icons appears next to each voice
record:
Filtering by Voice Record Type
You can set your phone to show all voice records,
only voice records created when your phone was in
a call, or only voice records created when your
phone was not in a call.
1From the main menu, select VoiceRec.
2Press m.
3Select Filter.
4Select the option you want:
•All— show all voice records.
•InCall— show only voice records created
when your phone was in a call.
•Normal— show only voice records created
when your phone was not in a call.
Tip: You can also press *or #to scroll
through these options while viewing the list
of voice records.
Creating Voice Records
Phone Not in a Call
Torecordanotetoyourself:
1From the main menu, select VoiceRecord >
[New VoiceRec].
cA voice record made while your phone was
not in a call.
vA voice record made while your phone was in
acall.
81
Playing Voice Records
2Say the message you want to record into the
microphone.
Tip: To stop recording before you are finished,
press Aunder Pause. To start recording
again, press Aunder Resume.Tostop
recording and discard the voice record at
any time, press Aunder Cancel.
3When you are finished recording, press O.
Toaddtotheendofanexistingvoicerecord:
1From the main menu, select VoiceRecord.
2Scroll to the voice record you want to add to.
3Press m.
4Select Add To.
5When you are finished recording, press O.
Phone in a Call
To record a phone call:
1Whileonanactivecall,pressm.
2Select Record.
3When you are finished recording, press O.
Note: Recording of phone calls is subject to
applicable laws regarding privacy and
recording of phone conversations.
Playing Voice Records
1From the main menu, select VoiceRecord.
2Selectthevoicerecordyouwanttoplay.
3To stop the voice record while it is playing, press
O.
Tip: To pause or resume, press any number key.
Labeling Voice Records
When you create a voice record, it is labeled with
the time and date it was recorded. You can then
rename it with a custom label.
1From the main menu, select VoiceRecord.
2Scroll to the voice record you want to label.
3Press Aunder Label.
4Enter the label you want to assign. See
“Entering Text” on page 53.
5Press O.
Locking Voice Records
When you lock a voice record, it cannot be deleted
until you unlock it.
1From the main menu, select VoiceRecord.
2Scroll to the voice record you want to lock or
unlock.
82
Voice Records
3Press m.
4Select Lock to lock the message. -or-
Select Unlock to unlock the message.
When a voice record is locked, this icon Rappears
next to it.
Deleting Voice Records
Deleting a voice record from the voice record list
deletes it from all parts of your phone, including the
media center and Contacts.
Deleting a Voice Record
1From the main menu, select VoiceRecord.
2Scroll to the unlocked voice record you want to
delete.
3Press m.
4Select Delete.
5Press Oor Aunder Yes to confirm.
Deleting All Voice Records
1From the main menu, select VoiceRecord.
2Scroll to any voice record.
3Press m.
4Select Delete All.
5Press Oor Aunder Yes to confirm.
Managing Memory
To view the amount of memory available for voice
records:
1From the main menu, select VoiceRecord.
2With [New VoiceRec] highlighted, press A
under Memory.-or-
With any voice record highlighted, press m.
Select Memory.
To free more memory by deleting all unlocked
voice records:
1From the voice records memory screen, press
Aunder Delete.
2Press Oor Aunder Yes to confirm.
Note: Voice records are stored in your phone
using the same memory space used to
store messages, Java application data,
and all items accessible through the
media center. Deleting some of these
other items frees memory for voice
records.
83
Java Applications
Your phone arrives with Java applications loaded
and ready to install. You can download and install
more Java applications.
Note: Using Java applications may cause your
phone to use up more battery power than
other uses of your phone.
Installing Applications
1From the main menu, select Java Apps.
2Select the application or suite of applications
you want to install.
Installation messages appear as the application
installs.
3IfyouwanttocreateashortcuttotheJava
application on the main menu: Press Aunder
Next.PressAunder Yes.PressO.
4Press Aunder Done.
Running Applications
Torunanapplicationthathasashortcutonthe
main menu:
1From the main menu, select the application or
suite of applications you want to run.
2Ifyouhaveselectedasuiteofapplications,
selecttheapplicationyouwanttorun.
To run an application that does not have a shortcut
on the main menu:
1From the main menu, select Java Apps.
2Select the application or suite of applications
you want to run.
3Ifyouhaveselectedasuiteofapplications,
selecttheapplicationyouwanttorun.
Tip: If you don’t hear the sounds associated with
the Java application, select Settings >
Volume and check the volumes of Java
Speaker and Java Earpiece.
Suspending Applications
When you suspend an application, it does not stop
running. It goes to the background so that you can
run another application in the foreground.
To suspend an application:
Press eor close the flip.
To view your suspended applications:
From the Java menu, select Suspended Apps.
You can have up to 3 applications running at one
time — 1 running in the foreground and 2 in the
background.
84
Java Applications
Resuming Applications
You can resume a suspended application at any
time. This brings it to the foreground.
1From the Java menu, select Suspended Apps.
2Select the application you want to resume.
Ending Applications
Toendanapplication:
1From the main menu, select Java Apps.
2If the application you want to end is part of a
suite of applications, select the suite.
3Scroll to the application you want to end.
Press Aunder End.-or-
If End is not one of your options: Press m.Select
End.
Tip: You can also end applications from the
Suspended Apps screen.
To end all applications:
1From the main menu, select Java Apps.
2Scroll to Suspended Apps.
3Press m.
4Select End All.
5Press Oor press Aunder Yes to confirm.
6If you want to end all applications without letting
them exit, press Aunder EndNow.
Downloading Applications
If you want to run more Java applications, you can
download them into your phone.
Go to www.motorola.com/idenupdate for a
selection of Java applications and downloading
instructions.
Deleting Applications
To delete an application:
1From the main menu, select Java Apps.
2Scroll to the application you want to delete.
3Press m.
4Select Deinstall.
5Press Oor press Aunder Yes to confirm.
6When your phone has finished deleting the
application, press Aunder Done.
To delete all Java applications:
1From the main menu, select Java Apps.
2Scroll to Java System.
3Press m.
4Select Delete All.
85
Managing Memory
5Press Oor press Aunder Yes to confirm.
Managing Memory
To view the amount of memory available for Java
applications:
1From the main menu, select Java Apps > Java
System.
2Press Aunder Next.
3To see more memory information, press A
under Next again.
Deleting Java applications frees memory.
Note: Java application data is stored in your
phone using the same memory space
used to store messages, voice records,
ring tones, and wallpaper images.
Deleting some of these other items frees
memory for Java applications.
Shortcuts on the Main Menu
When you install an application, you can create a
shortcut to the application on the main menu.
Tocreateashortcuttoanapplicationthatis
already installed:
1From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps.-or-
From the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
2Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
hasacheckmarknexttoit.
3Scroll to the application you want to create a
shortcut for.
4Press O.
5Press Aunder Done.
Toremoveashortcut:
1From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps.-or-
From the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
2Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
hasacheckmarknexttoit.
3Scroll to the application you want to remove the
shortcut for.
86
Java Applications
4Press O.
5Press Aunder Done.
Java Applications and GPS
Enabled
Some Java applications can make use of your
phone’s GPS feature to determine the approximate
geographical location of your phone. (See “GPS
Enabled” on page 89 for more information on the
GPS feature.) However, for privacy reasons, you
may not always want Java applications to access
the location of your phone. Your phone protects
your privacy by giving you the option to block all or
some Java applications from accessing the
location of your phone.
Setting Privacy for All Java
Applications
These options control the privacy of all Java
applications on your phone:
• Restricted — No Java or similar software
applications may access the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
• Unrestricted — All Java applications may
access the location of your phone, without
notifying you.
•ByPermission— When a Java application
attempts to access the location of your phone,
you are prompted to give permission. However,
location information may still be available to the
phone’s owner, fleet manager, or account
administrator.
See “Setting Privacy Options” on page 95 for
information on choosing these options.
Granting or Denying Permission
If you choose By Permission, you must grant or
deny each Java application access to the location
of your phone when the application requests
access for the first time. You may be required to
grant or deny subsequent requests from the same
application, depending on the privacy setting you
choose for the individual Java application (see
“Setting Privacy for Each Java Application” on
page 87).
When a Java application requests access to the
location of your phone, a screen appears informing
you.
87
Java Applications and GPS Enabled
To deny this request:
1Press Aunder Deny. The application does not
access the location of your phone.
2Select the denying option you want:
• Always — If the application requests access
to the location of your phone again, the
request is denied without notifying you.
• For this session — If the application
requests access to the location of your phone
again before you power off your phone, the
request is denied without notifying you.
•OnlyOnce— If the application requests
access to the location of your phone again,
you are prompted to grant or deny
permission.
To grant this request:
1Press Aunder Grant. The application accesses
your phone’s location.
2Select the granting option you want:
• Always — If the application requests access
to the location of your phone again, the
request is granted without notifying you.
• For this session — If the application
requests access to the location of your phone
again before you power off your phone, the
request is granted without notifying you.
•OnlyOnce— If the application requests
access to the location of your phone again,
you are prompted to grant or deny
permission.
Setting Privacy for Each Java
Application
After a given Java application requests access to
the location of your phone for the first time, you
have the opportunity to set the GPS privacy option
for that Java application.
1From the main menu, select Java Apps.
2Scroll to the application or suite of applications
youwanttosettheprivacyoptionfor.
If the application has requested access to the
location of your phone, this icon Sappears
when you highlight the application.
3Press m.
4Select Permissions.
5Select the privacy option you want for this
application:
•Always— The application always has
permission to access the location of your
phone, without notifying you.
88
Java Applications
•Ask— When the application requests access
to the location of your phone, you are
prompted to grant or deny permission (see
“Granting or Denying Permission” on page
86).
• Never — When the application requests
access to the location of your phone, the
request is denied without notifying you.
89
GPS Enabled
Your phone’s GPS Enabled feature uses
information from Global Positioning System (GPS)
satellites orbiting the Earth to determine the
approximate geographical location of your phone,
expressed as latitude and longitude. The
availability and accuracy of this location
information (and the amount of time that it takes to
calculate it) will vary depending on the environment
in which you are using the GPS feature. For
example, GPS location fixes are often difficult to
obtain indoors, in covered locations, between high
buildings, or in other situations where you have not
established a clear broad view of the sky. SEE:
“IMPORTANT: Things to Keep in Mind”.
When you make a 911 emergency call, the GPS
feature of your phone can help emergency
personnel locate you if your phone has adequate
access to GPS satellite signals and your
emergency response center is equipped to process
such information.
You can also use the GPS feature to view your
approximate location. Location information
appears on the phone’s display.
Java applications loaded on your phone can also
request your location. If your phone is connected to
a laptop computer or similar device, software
running on that device can request your location.
To protect your privacy, you can control whether
these requests are granted.
IMPORTANT: Things to Keep
in Mind
If you are using the GPS feature of your phone
while driving, please give full attention to driving
and to the road.
Where adequate signals from multiple satellites
are not available (usually because your GPS
antenna cannot establish a view of a wide area of
open sky), the GPS feature of your phone WILL
NOT WORK. Such situations include but are
not limited to:
• In underground locations
• Inside of buildings, trains, or other covered
vehicles
• Under any other metal or concrete roof or
structure
• Between tall buildings or under dense
tree-cover
• Near a powerful radio or television tower
90
GPS Enabled
• When your GPS antenna is covered (for
example, by your hand or other object) or
facing the ground
• In temperature extremes outside the
operating limits of your phone
Walking or driving very slowly may also
substantially reduce GPS performance.
Even where location information can be
calculated in such situations, it may take much
longer to do so, and your location estimate may
not be as accurate. Therefore, in any 911 call,
always report the location to the emergency
response center if you can and if you cannot,
remain on your phone for as long as the
emergency response center instructs you.
Even where adequate signals from multiple
satellites are available, your GPS feature will
only provide an approximate location, often
within 150 feet (45 meters) but sometimes
much further from your actual location. Advice
on how to improve GPS performance is
provided in “Enhancing GPS Performance” on
page 92.
While the GPS feature of your phone can be a
valuable navigational aid, it does not replace the
need for careful navigating and good judgment.
Never rely solely on one device for navigation.
Remember that the accuracy of the location
information and the time needed to obtain it will
vary depending on circumstances, particularly the
ability to receive signals from adequate numbers of
satellites.
On emergency calls, your phone uses assistance
information from the phone network to improve the
speed and accuracy of your phone’s location
calculation: if such assistance information
becomes unavailable, it may reduce the speed and
accuracy of the location calculation.
The satellites used by the GPS feature of your
phone are controlled by the U.S. government and
are subject to changes implemented in accordance
with the Department of Defense GPS user policy
and the Federal Radionavigation Plan. These
changes may affect the performance of the GPS
feature of your phone.
Making an Emergency Call
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
When you make an emergency 911 call, the GPS
feature of your phone begins to seek information to
calculate your approximate location. It will take
the GPS feature of your phone some time to
determine your approximate location. Even
where your phone has good access to sufficient
91
Viewing Your Approximate Location
GPS satellite signals and network assist data, it
may take 30 seconds or more to determine the
approximate location. This time will increase where
there is reduced access to satellite signals. When
your approximate location is determined, it is made
available to the appropriate emergency response
center.
In some cases, your local 911 emergency
response center may not be equipped to
receive GPS location information. For this
reason, and because the GPS location information
reported is only approximate or may not be
available in your location (see “IMPORTANT:
Things to Keep in Mind” on page 89), always
report your location to the 911 operator you
speak to when making an emergency call, if able,
just as you would when using a phone without GPS
capabilities.
Note: If you are concerned about whether your
local 911 emergency response center is
equipped to receive GPS location
information, contact your local authorities.
In general, if your phone has access to signals
from more GPS satellites, your location will be
determined faster and more accurately than if your
phone has access to signals from fewer GPS
satellites.
If your phone does not have adequate access to
GPS satellites signals, the location of the nearest
cell tower in contact with your phone is
automatically made available to the emergency
response center, if the center has the capability to
receive such information.
See “Enhancing GPS Performance” on page 92 for
information on how to help your phone determine
your location.
Viewing Your Approximate
Location
1From the main menu, select GPS > Position.
2Scroll to view the entire screen.
This displays the following information about the
last time your location was calculated:
•The time (as Greenwich Mean Time) and date
that the location was last calculated
•The approximate location, expressed as latitude
and longitude
•The estimated accuracy of the calculated
location. This estimate of accuracy is only a very
rough estimate and may vary substantially from
the actual accuracy of the approximate location
information reported.
92
GPS Enabled
•The number of satellites used to calculate the
location. In general, more satellites make for
better accuracy.
To calculate your location again:
Press Aunder Rfrsh.
It may take your phone several minutes to
complete the process of determining your location.
During this time, a message usually appears on
your phone’s display saying your phone is
scanning for satellites. For tips on getting the best
location calculation, see “Enhancing GPS
Performance”.
The Position screen displays the updated
information.
To cancel a location calculation before it is
completed:
Press Aunder Cancel to return to the Position
screen. -or-
Press eto return to the idle screen.
Each time approximate location of your phone is
calculated, the latest location information is stored
in your phone and remains there even when your
phone is powered off. You will see this information
thenexttimeyouviewthePosition screen.
If you received a phone call or alert while
attempting to determine your location, the Position
screen will disappear, but your phone will continue
attempting to determine its location. If it is
successful, the new location information will be
displayed the next time you view the Position
screen.
Enhancing GPS Performance
Sometimes the GPS feature of your phone may be
unable to complete a location calculation
successfully. If this happens when you are making
an emergency call, the location of the nearest cell
tower in contact with your phone is made available
to the appropriate emergency response center if
the center has the capability to receive such
information. If this happens when you are trying to
view your location on the phone’s display, you will
see a message indicating that your phone cannot
access satellites.
93
Enhancing GPS Performance
To improve accuracy and increase your chances of
a successful calculation, do the following while
your phone is determining your approximate
location:
•Stay in the open. The GPS feature works best
where there is nothing between your phone and
a large amount of open sky. If possible, go
outside, away from tall buildings and foliage.
While performance in a building is improved by
moving closer to windows, glass with certain sun
shielding films may block satellite signals.
•Extend your phone antenna.
•Hold your phone to enhance reception. Signals
from GPS satellites are transmitted to your GPS
antenna, which is in your phone antenna. Hold
your phone away from your body, giving the
antenna clear access to satellite signals. Do not
covertheantennaareawithyourfingersor
anything else.
GPS antenna
94
GPS Enabled
•Stand still. If possible, stand still until your phone
is finished determining your location. Moving
your phone at a walking pace while your phone
is calculating your approximate location may
substantially decrease GPS performance.
•In a car. When using the GPS Enabled feature in
a car, position your phone so that the GPS
antenna has good access to GPS signals
through the car’s windows. Typically, the GPS
antenna has best access to GPS signals in a car
when placed near a window.
Note: Although moving your phone at a walking
pace decreases GPS performance,
moving it at the speed of a moving car
does not.
•Stay in network coverage. Depending on who
your service provider is, the network will provide
your phone with information that helps
determine your location more quickly and
accurately.
Updating Satellite Almanac
Data
Another way to keep the GPS feature of your
phone working well is to keep your satellite
almanac data up to date.
The United States government maintains an
almanac of data about where GPS satellites are as
they orbit the Earth. This information is available to
your phone. Keeping your satellite almanac up to
date helps your phone determine your location
more quickly.
The almanac contains information about the
location of satellites, their operational status, and
other satellite information. Keeping this information
updated enhances the performance of your GPS
feature. In most cases, your phone will be able to
get a fix in strong satellite signal conditions with
outdated almanac data, but it may take longer.
Note: When you make an emergency call, your
phone does not rely upon the almanac to
determine your location.
If your satellite almanac data is out of date, your
phone may prompt you to update it. Follow the
instructions that appear on the phone’s display.
Youmaybeaskedtogotoawebsiteorcalla
customer care number.
95
Setting Privacy Options
Setting Privacy Options
Your phone’s GPS privacy options control whether
Java applications on your phone or other software
applications may view the location of your
phone.You may set your phone to one of these
GPS privacy options.
Note: Privacy options do not apply to the
transmission of location information
during emergency 911 calls.
To set your GPS privacy options:
1From the main menu, select GPS > Privacy.
2If your GPS PIN security feature is enabled,
enter your GPS PIN. (See “Setting the GPS PIN
Security Feature” for more information.)
3Select the privacy option you want:
• Restricted — No Java or similar software
applications may view the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
• Unrestricted — All applications may view the
location of your phone, without notifying you.
•ByPermission—Whenanapplication
attempts to view the location of your phone,
youwillbepromptedtogivepermission.
However, location information may still be
available to the phone’s owner, fleet manager,
or account administrator.
Setting the GPS PIN Security Feature
To prevent your GPS privacy settings from being
altered without your knowledge, your GPS privacy
option can be protected by a PIN.
When you receive your phone, the GPS security
feature is turned off, so you do not have to enter a
GPS PIN to access your GPS privacy options. If
you turn this feature on, you will be required to
enter a GPS PIN to access your GPS privacy
options.
To turn the GPS Enabled security feature on or off:
1From the main menu, select Settings >
Security > GPS PIN.
2Select On or Off.
3Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
4Press Aunder Ok.
96
GPS Enabled
To change your GPS PIN:
1From the main menu, select Settings >
Security > Change Password > GPS PIN.
2Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
3Press Aunder Ok.
4Enter the new 4- to 8-digit GPS PIN.
5Press Aunder Ok.
6Enter the new 4- to 8-digit GPS PIN to confirm.
7Press Aunder Ok.
Using GPS with Map Software
You can use the GPS feature of your phone to
provide approximate location data to a laptop
computer or similar device that is running
interactive map software such as that made by
DeLorme or Microsoft. This way, if your phone has
good access to GPS signals, your approximate
position on a map can be made available as you
travel in a vehicle.
To do this, connect your phone to your laptop (or
other device) with a data cable and set your phone
to transmit data (see “Getting Started” on page 97).
Your phone then provides your approximate
location to the device running the map software,
which displays your location on a map. Your phone
provides an updated location every second and the
map software displays your changing location on
its map.
See “Enhancing GPS Performance” on page 92 for
more details on obtaining good location
information.
Note: Because your phone is continuously
determining your location, using the GPS
feature of your phone with map software
uses the phone’s battery power quickly.
Software Compatibility
Your phone sends location information to your
laptop or other device using the standard National
Marine Electronics Association (NMEA) format.
Your phone supports output messages in
NMEA-0183 format and supports the following
NMEA-0183 sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
Themapsoftwarerunningonyourlaptoporother
device must support NMEA 3.0.
97
Using GPS with Map Software
Getting Started
To connect your phone to your laptop or other
device:
1Open the connector cover.
2With the phone’s display facing up, insert the
data cable’s connector into the accessory
connector, until you hear a click.
3InsertthedataplugintotheCOMportofyour
laptop or other device.
Make sure no other application is using the COM
port selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
•Bits per second: 4800
•Data bits: 8
•Parity: None
•Stop bits: 1
•Flow control: Hardware
To set your phone to send location information to
your laptop or other device:
1From the main menu, select GPS > Interface.
2Set NMEA OUT to On.
Your phone is now sending location data to your
laptop or other device.
To stop your phone from sending location data to
your laptop or other device:
Set NMEA OUT to Off.
Each time you power your phone on, NMEA OUT
is automatically set to Off.
connector
cover
98
Datebook
Datebook stores up to 250 events. You can store
events over a 13 month period — 12 months after
and 1 month before the current date.
A Datebook event contains:
•A subject — A name you assign to the event.
You can also enter a phone number, Private ID,
or Talkgroup number here. After the event is
stored, you can call this number from Datebook
or when you get a reminder of this event.
•A location — The location of the event. You can
also enter a phone number, Private ID, or
Talkgroup number here. After the event is
stored, you can call this number from Datebook
or when you get a reminder of this event.
•A start time — The start time automatically
assigned to an event is the beginning of the day.
You can change the start time, or assign no start
time, before storing the event.
•A duration — the length of time the event lasts
•A date — The date automatically assigned to an
event is the date that was highlighted or
selected when you began creating the event.
You can change this date before storing the
event.
•A repeat — lets you store the event as a
recurring event.
•A reminder — If an event has a start time, you
can set Datebook to remind you that the event is
goingtostart.
•a ring tone for the reminder
•a profile that your phone is switched to while the
event is occurring
•a Java application that starts when the event
starts
Only the subject and date are required.
Viewing Datebook
To access Datebook:
From the main menu, select Datebook.
You can view Datebook by the day, by the week, or
by the month. You can also view the details of any
event.
In day view, brief information about each event for
that day appears.
In week view, events appear as markers
corresponding to their times.
In month view, days with events appear with a
marker in the corner.
99
Creating Events
To view an event:
1Select the day the event occurs.
2Select the event.
To change the current view:
1While viewing Datebook, press m.
2Select the view you want.
Navigating Datebook
To scroll through Datebook:
Scroll left and right using the navigation key. -or-
In week view and month view, press *or #.
Toseemoreindayview:
Scroll up and down using the navigation key.
To highlight a day in month view:
Enter the date using the keypad.
To go to today’s date:
1While viewing Datebook, press m.
2Select Go To Today.
To go to any date in Datebook:
1While viewing Datebook, press m.
2Select Go To Date.
3Selectthedateyouwant.
Creating Events
Every Datebook event must have a subject and be
stored to a date. Other information is optional.
You may enter the information in any order by
scrolling through the event details.
After you have entered the information you want,
you can press Aunder Done to store the event to
Datebook.
If you decide you don’t want to store the event:
Press Aunder Cancel.
To create a Datebook event:
1While viewing datebook, press Aunder New.
-or-
In day view, select [New Event].
2To assign a subject to the event:
Select Subject.
Enter the name. See “Entering Text” on page
53. -or-
Press Aunder Browse to choose from
common event names. -or-
Enter a phone number, Private ID, or Talkgroup
number. After the event is stored, you can call
this number.
100
Datebook
When you are finished, press O.
3Ifyouwanttoassignalocationtotheevent:
Select Location.
Enter the location. See “Entering Text” on page
53. -or-
Enter a phone number, Private ID, or Talkgroup
number. After the event is stored, you can call
this number.
When you are finished, press O.
4The start time automatically assigned to an
event is the beginning of the day. If you want to
change the start time or assign no start time:
Select Start.
Enter the start time you want. -or-
Press Aunder No Time to assign no start time.
5Ifyouwanttoassignadurationtotheevent:
Select Duration.
Select the duration you want. -or-
Select Custom to enter a duration.
6The date automatically assigned to an event is
the date that was highlighted or selected when
you began creating the event. To change the
date of the event:
Select Date.
Enter the date you want.
7If you want to make the event a recurring event:
Select Repeat.
Select the repeat cycle you want.
If the event occurs more than once a week:
Select Multiple Day. Select the days you want.
Press Aunder Done.
Select the date you want this event to stop
recurring.
8If you want to create a reminder for this event:
Select Reminder.
Select the reminder time you want. -or-
Select Custom to enter a reminder time.
Note: If an event has no start time, you can not
create a reminder for it.
9If you have entered all the information you want
for this event, press Aunder Done.-or-
Ifyouwanttoassignaringtone,aprofile,ora
Java application to the event, see “Assigning
More Options” on page 101.
101
Editing Events
Assigning More Options
To assign more options before storing an event:
1If you have created a reminder for the event and
want to set the ring tone for that reminder:
Select Ring Tone.
Select the ring tone you want from the ring tones
stored in your phone.
2If you want to assign a profile that your phone is
switched to while the event is occurring:
Select Profile.
Select the profile you want from the profiles
stored in your phone.
Your phone switches to this profile when the
event starts and switches back to the previous
profile when the event ends.
3IfyouwanttoassignaJavaapplicationtostart
when the event starts:
Select App.
Select the application you want from the Java
applications stored in your phone.
If you created a reminder for this event, your
phonepromptsyoutostarttheJavaapplication
when you get the reminder.
Editing Events
To change the details of an event:
1Select the day the event occurs.
2Select the event.
3Press Aunder Edit.
Tip: To copy an event to another date: Press m.
Select Copy.
4Follow the applicable instructions in “Creating
Events”onpage99toeditthevariousfields.
Deleting Events
1Select the day the event occurs.
2Select the event.
3Press m.
4Select Delete.
5If the event is not a recurring event, press Oor
press Aunder Yes to confirm. -or-
If the event is a recurring event:
Select This Event Only to delete only the event
selected in step 2.
Select Repeat Event to delete all occurrences
of the event.
102
Datebook
Receiving Reminders
If you created a reminder for a Datebook event,
when the reminder time occurs, your phone notifies
you with text on the display and a reminder tone.
To view more details about the event:
Open the flip. -or-
Press Aunder View.
To dismiss the reminder:
If the flip is closed, press ..-or-
If the flip is open, press O,pressAunder
Dismiss, or close the flip.
Tip: You can set your phone to power on when
you receive a reminder. See “Customizing
Datebook Setup” on page 103.
For Events with Java Applications
If you assigned a Java application to start when the
event starts, you can start the application when you
get the reminder.
1Press m.
2Select Launch.
For Events with Numbers to Call
Ifyoustoredaphonenumber,PrivateID,or
Talkgroup number in the Subject or Location field
of a Datebook event, you can call or send a call
alert to that number from the reminder for that
event.
Making Calls From Datebook
Ifyoustoredaphonenumber,PrivateID,or
Talkgroup number in the Subject or Location field
of a Datebook event, you can call or send a call
alert to that number from Datebook.
YoucancallthenumberstoredinSubject and the
number stored in Location if one is a phone
number and the other is a Private ID or Talkgroup
number. If both are the same type of number, the
number in Subject is called or sent a call alert. To
callorsendacallalerttothenumberstoredin
Location, you must delete the number stored in
Subject.
To make a call or send a call alert:
1Highlight or select the event containing the
number you want to call or send a call alert to.
2To make a phone call:
Press s.-or-
Press m.SelectCall # in Event.
103
Customizing Datebook Setup
To make a Private call or group call:
Press and hold the PTT button on the side of
your phone. -or-
If you did not include a #before the Talkgroup
you want to call: Press m. Select Talkgroup.
To send a call alert:
Press m. Select Alert # in Event.
Customizing Datebook Setup
To access Datebook set up options:
1From the main menu, select Datebook.
2Press m.
3Select Setup.
You can view or change these options:
•StartView— sets Datebook to start in day view,
week view, or month view when you access
Datebook.
•DailyBegin— sets the beginning of your day.
This is the earliest time of day displayed in week
view, if you have a 12-hour day view.
•Reminders— If this option is set to Only When
On, your phone reminds you of events only
when it is on. If this option is set to Always,your
phone powers itself on when you receive
reminders. To avoid draining the battery, your
phone then powers itself off after a short time.
• Delete After — sets the amount of time
Datebook waits to delete an event after is
occurs.
•TimeShift— lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
• Alert Timeout — sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
•Clock— controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
104
Customizing Your Phone
Setting the Volume
Of the Earpiece and Speaker
1From the main menu, select Settings > Volume.
2Scroll to Earpiece to set the earpiece volume.
-or-
Scroll to Speaker to set the speaker volume.
3To s et the v olume :
Scroll left or right. -or-
Press the volume controls.
Of the Ringer
Press the volume controls.
Setting Your Phone to Vibrate
To set your phone to vibrate instead of making a
sound when you receive phone calls, Private calls,
group calls, call alerts, message notifications,
pictures sent using Send via PTT, and Datebook
reminders, see “Setting Your Phone to Vibrate” on
page 50.
To set your phone to vibrate instead of making a
sound when you receive Private calls and group
calls, even if you want your phone to ring for other
features:
1From the main menu, select Settings > 2-Way
Radio > Alert Type.
Tip: If Alert Type does not appear: From the
main menu, select Ring Tones.Makesure
VibeAll is set to Off.Repeatstep1.
2Select Vibrate to set your phone to vibrate.
Tip: Select Silent in step 2 to set your phone to
neither vibrate nor make a sound.
Changing the Look of Your
Phone
Themes
A theme lets you control the look of the display by
changing the color scheme, wallpaper, the look of
the main menu, and the look of the display options.
To change the theme of your phone:
1From the main menu, select Settings >
Display/Info > Theme
2Selectthethemeyouwant.
105
Changing the Look of Your Phone
Wallpaper
A wallpaper is an image that appears on the idle
screen.
Note: Some themes may prevent you from
changing your wallpaper.
Choosing a Wallpaper
1From the main menu, select Settings >
Display/Info > Wallpaper > Wallpaper.
2Select the wallpaper you want.
Tip: If you want to see what the wallpaper looks
like, press Aunder View.
Setting Wallpaper to Change Automatically
Note: This feature may not be offered by your
service provider.
1From the main menu, select Settings >
Display/Info > Wallpaper > Auto Cycle.
2Select how often you want the wallpaper to
change.
Any of the wallpapers in your phone may appear
on the idle screen.
Including Pictures From the Media Center
If you have set wallpapers to change automatically,
youcanincludepicturesstoredinthemediacenter
as images that may appear on the idle screen.
1From the main menu, select Settings >
Display/Info > Wallpaper > Select Pictures.
2Select the pictures you want. -or-
Select All to include all pictures in the media
center.
3When you are finished, press Aunder Done.
Setting Text Size
To set the size of the text on the internal display:
1From the main menu, select Settings >
Display/Info > Text Size.
2Select the option you want:
• Zoom — 11 characters per line
• Standard — 14 characters per line
• Compressed — 18 characters per line
To set your phone to briefly display very large
digits when you enter numbers at the idle screen:
1From the main menu, select Settings >
Display/Info > Large Dialing.
2Set this option to Large Digits.
106
Customizing Your Phone
Setting Contrast
To set the contrast of the display:
1From the main menu, select Settings >
Display/Info > Contrast.
2To set the contrast of the internal display, select
Int. Display.-or-
To set the contrast of the external display, select
Ext. Display.
3Scroll left or right to set the contrast.
Setting the Menu View
You can set the items on your main menu and Java
applications menu to appear as large icons or a
list:
1From the main menu, select Settings >
Display/Info > Menu View.-or-
From the main menu: Press m.SelectMain
Menu Setup > Menu View.
2To choose a list, select List View.-or-
To choose large icons, select Icon View.
Setting the Backlight
A backlight lights the display and keypad when you
make or receive a call, open or close the flip, or
press keys or buttons.
If you do not do any of these things for 10 seconds,
the backlight dims. If you do not do any of these
things for 30 seconds or more, the backlight turns
off.
When the backlight is off, pressing a key on the
keypad turns the backlight on but does not perform
theactionassociatedwiththekey.
To control how long the backlight stays on:
1From the main menu, select Settings >
Display/Info > Backlight > Timer.
2Select the number of seconds you want the
backlight to stay on.
Tip: To control how long the backlight stays on
while a Java application is displayed: Select
Settings > Display/Info > Backlight >
Java Timer.
To set the keypad backlight to light up only in low
light conditions:
1From the main menu, select Settings >
Display/Info > Backlight > Sensor.
2Set this option to On.
Temporarily Turning Off Calls
Sometimes you may want to have your phone on,
but turn off its ability to make and receive calls,
such as when you are on an airplane.
107
Using Settings
To set your phone so that it cannot make or receive
phone calls, Private calls, or group calls; or transfer
data:
1From the main menu, select Settings >
Advanced > Airplane Mode.
2Set this option to On.
This icon Uappears.
To restore your phone’s ability to do all these
things:
Set this option to Off.
Using Settings
Settings contains many submenus that let you
customize your phone.
For information on applying groups of settings to
your phone together, see “Profiles” on page 111.
Display/Info Features
The Display/Info menu controls how the keypad
and display appear:
• Wallpaper — controls the wallpaper that
appears on the idle screen.
• Theme — changes look of the display.
•TextSize— sets size of text on the display.
• Home Icons — controls whether main menu
icons appear on the idle screen.
• Backlight — controls backlight illumination.
•Clock— controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
•MenuView— controls whether the items on
your main menu and Java applications menu
appear as large icons or a list.
• Large Dialing — sets large digits to appear on
the idle screen when you enter a number.
•Contrast— sets the contrast of the display.
• Language — sets the language that your phone
displays.
Phone Calls Features
The Phone Calls menu controls how your phone
handles phone calls:
• Set Line — sets phone line 1 or phone line 2 as
the active line for outgoing calls.
•AnyKeyAns— If this feature is on, you can
answer calls by pressing any key on the keypad.
•AutoRedial— sets your phone to automatically
redial calls you make when the system is busy.
•CallWaiting— See “Call Waiting” on page 40.
108
Customizing Your Phone
• Auto Ans — sets your phone to automatically
answer an incoming call after a specified
number of rings. When this feature is on, the
phone answers by connecting you to the caller;
it does not send the call to voice mail, unless
you are out of coverage or on the line.
• Flip Activation — See “Setting Flip Actions” on
page 43.
• Minute Beep — causes a beep to sound every
minute of an active call.
• Call Duration — causes the duration of a call to
appear on the display when the call ends.
• TTY —See“MakingTTYCalls”onpage46.
• Notifications — See “Message Notifications” on
page 55.
•JavaAppControl— If you have installed a
Java application that answers phone calls, this
setting lets you turn that application on.
2-Way Radio Features
The 2-Way Radio menu controls how your phone
handles Private calls and group calls:
• Tkgrp Silent — controls whether you hear
group calls to your Talkgroup. See “Group Calls”
on page 44.
•TkgrpArea— lets you define your Talkgroup
area.
• One Touch PTT — See “One Touch PTT” on
page 42.
•AlertType— controls how your phone notifies
you when you receive Private calls and group
calls.
•SendviaPTT— sets your phone’s ability to
send and receive pictures in Private calls. See
“Using Send via PTT” on page 74.
Personalize Features
The Personalize menu makes main menu items
easier to access.
• Menu Options —Reorder Menu lets you
change the order of the items on the main menu
by grabbing and moving them; Add/Remove
Apps letsyoucreateashortcuttoaJava
application on the main menu.
•UpKey— sets the main menu item you access
when you scroll up from the idle screen.
•DownKey— sets the main menu item you
access when you scroll down from the idle
screen.
• Left Key — sets the main menu item you access
when you scroll left from the idle screen.
•RightKey— sets the main menu item you
access when you scroll right from the idle
screen.
109
Using Settings
• Center Key — sets the main menu item you
access when you press Ofrom the idle screen.
• Left Sftkey — sets the main menu item you
access when you press the left option key from
the idle screen.
• Right Sftkey — sets the main menu item you
access when you press the right option key from
the idle screen.
•PowerUp— sets the main menu item you see
when you power on your phone. To set the idle
screen to be the first thing you see when you
power on your phone, select Default Ready.
Volume Features
The Volume menu sets the volume of sounds your
phone makes:
•Line1— sets ringer volume for phone line 1.
•Line2— sets ringer volume for phone line 2.
• Messages — sets the volume of message
notifications and Datebook reminders.
• Earpiece — sets the volume of sound coming
out of the earpiece.
• Speaker — sets the volume of sound coming
outofthespeaker.
•Keypad— sets the volume of sound associated
with pressing keys and buttons.
• Java Earpiece — sets the volume of sound
associated with Java applications coming out of
the earpiece.
• Java Speaker —sets the volume of sound
associated with Java applications coming out of
the speakers.
•Data— sets the volume of sounds that notify
you that you are receiving a circuit data call.
Security Features
The Security menu lets you turn security features
on and off and change passwords:
• Phone Lock — turns on a feature that locks
your phone, either immediately or automatically
after a set period of inactivity. An unlock code is
required to enable this feature, to unlock the
phone, and to set a new unlock code. Contact
your service provider for your default unlock
code.
•KeypadLock— locks the phone’s keypad,
either immediately or automatically after a set
period of inactivity.
•SIMPIN— enables and disables your phone’s
SIM PIN security feature. See “Turning the PIN
Requirement On and Off” on page 12.
110
Customizing Your Phone
•GPSPIN— enables and disables your phone’s
GPS PIN security feature. See “Setting the GPS
PIN Security Feature” on page 95.
• Change Passwords — changes your phone
unlock code, security code, SIM PIN, and GPS
PIN.
Advanced Features
The Advanced menu contains advanced and rarely
used Settings features.
• Alert Timeout — sets the amount of time a tone
continues to sound when you receive a
message notification, call alert, or Datebook
reminder.
• Headset/Spkr — sets the headset option. See
“Using a Headset” on page 136.
• Connectivity —Network ID sets the phone’s
network IDs and their roaming options under the
direction of your service provider; Master Reset
lets your service provider reset your service in
the event of a security or provisioning problem.
• Reset Defaults —Reset Settings returns all
settings to their original defaults; Reset All
returns all settings to their original defaults and
erases all stored lists. Use only under the
direction of your service provider.
• ReturntoHome— controls how long the recent
calls list displays after calls.
• Airplane Mode — prevents your phone from
making or receiving phone calls, Private calls, or
group calls; or transferring data.
• Phone Only — prevents your phone from
making or receiving Private calls or group calls,
or transferring data.
Note: This feature may not be offered by your
service provider.
•BaudRate— sets the baud rate at which your
phone communicates with a laptop computer,
PC, or similar device.
111
Profiles
A profile is a group of settings saved together so
that you can apply them to your phone easily.
A profile contains these settings:
•RingTones— sets all options described in
“Ring Tones” on page 50, except assigning ring
tones to Contacts.
• Display/Info —setsWallpaper,Color Palette,
Text Size,andBacklight options. See
“Display/Info Features” on page 107.
• Phone Calls —setsSet Line and Auto Ans
options. See “Phone Calls Features” on page
107.
• Volume — sets all options described in “Volume
Features” on page 109.
•CallFilter— controls which calls, call alerts,
and message notifications your phone responds
to. See “Setting Call Filtering” on page 114.
• Advanced — sets headset option. See “Using a
Headset” on page 136.
Your phone arrives with pre-set profiles. You can
also create your own profiles.
Viewing Profiles
To view the profiles stored in your phone:
1From the main menu, select Profiles.
2Scrolltotheprofileyouwanttoview.
Tip: The profile that is currently in effect on your
phone has a checkmark next to it.
3Press Aunder View.
4Scroll to view settings.
Switching Profiles
To apply a profile to your phone:
1From the main menu, select Profiles.
2Scrolltotheprofileyouwanttoapply.
3Press O.
The profile you selected is now in effect.
How Changing Settings
Affects Profiles
Many of the settings contained in profiles can be
set without switching or editing profiles — for
example, by selecting Settings or Ring Tones to
set options, or by setting the volume of the phone’s
ring using the volume controls.
112
Profiles
When you do this, your phone either:
•Updates the profile in effect to reflect these
changes, without notifying you -or-
•Creates a temporary profile that contains these
changes
Note: This feature may not be offered by your
service provider.
To set your phone to create a temporary profile
that contains changes you make to settings:
1From the main menu, select Profiles.
2Press m.
3Select Setup > Temp Profile.
4Set this option to On.
To set your phone to update the profile in effect to
reflect any changes you make to settings:
Set Temp Profile to Off in step 4.
If your service provider does not offer the Temp
Profile option, your phone always updates the
profile in effect to reflect the changes you make to
settings.
Temporary Profiles
If your phone is set to create temporary profiles, a
temporary profile is created when you make
changes to settings without switching or editing
profiles.
A temporary profile is based on the profile in effect
when you made the changes, but reflects the
changed settings. Making more changes further
updates the temporary profile, for as long as it is in
effect.
A temporary profile stays in effect until you switch
profiles, power off your phone, or delete it (or the
profile it is based on) from the list of profiles.
If you do not store a temporary profile, it is deleted
when you switch profiles or power off your phone.
A temporary profile is automatically given the same
name as the profile it is based on, but with an
asterisk (*) in front of it.
When you view a temporary profile’s settings, the
options that differ from the profile it is based on
have an asterisk in front of them.
Storing a Temporary Profile
To store a temporary profile as a new profile:
1From the main menu, select Profiles.
113
Creating Profiles
2Scroll to the temporary profile.
3Press m.
4Select StoreAsNew.
5Enter the name you want to give the profile. See
“Entering Text” on page 53.
When you are finished, press O.
To overwrite the profile the temporary profile is
based on:
1From the main menu, select Profiles.
2Scroll to the temporary profile.
3Press m.
4Select Store Changes.
The temporary profile is stored with the name of
the profile it is based on. The profile it is based on,
as it existed before you made changes to settings,
is gone.
Creating Profiles
1From the main menu, select Profiles.
2Select [New Profile].-or-
Scroll to any profile. Press m. Select New.
3Enter the name you want to give the profile. See
“Entering Text” on page 53.
When you are finished, press O.
4If you want to base this profile on an existing
profile: Select Copy from. Select the profile you
want to base this profile on. If you do not choose
a profile to copy from, the new profile is based
on a default profile.
5Press Aunder Create.
6Scroll through the list of options and set their
values.
7Press Aunder Done.
Editing Profiles
1From the main menu, select Profiles.
2Scrolltotheprofileyouwanttoedit.
3Press m.
4Select Edit.
5Scroll through the list of options and set their
values.
Deleting Profiles
To delete a profile:
1From the main menu, select Profiles.
2Select the profile you want to delete.
Note: A temporary profile is automatically
deleted when the profile it is based on is
deleted.
114
Profiles
3Press m.
4Select Delete.
5Press Oor press Aunder Yes to confirm.
To delete all profiles:
1From the main menu, select Profiles.
2Press m.
3Select Delete All.
4Press Oor press Aunder Yes to confirm.
Setting Call Filtering
The call filtering setting in each profile lets you
control which calls, call alerts, and message
notifications your phone notifies you of, and which
it ignores.
To set call filtering:
1While setting options for a profile, select Call
Filter.
2To set filtering options for phone calls, select
Phone.
•Offsets your phone to notify you of all phone
calls.
•Allsets your phone to ignore all phone calls.
•AllContactssets your phone to notify you
only of phone calls from numbers stored in
Contacts.
• Some Cntcs sets your phone to notify you
only of phone calls from numbers you select
from Contacts.
3If you set the Phone option to Some Cntcs,
select up to 5 Contacts entries that contain
phone numbers you want to be notified of calls
from.
When you are finished, press Aunder Done.
4To set filtering options for Private calls and group
calls, select Prvt/Grp.
•Offsets your phone to notify you of all Private
calls and group calls.
•Onsets your phone to ignore all Private calls
and group calls.
5To set filtering options for call alerts, select
Alerts.
•Offsets your phone to notify you of all call
alerts.
•Onsets your phone to ignore all call alerts.
6To set filtering options for message notifications,
select Notifications.
•Offsets your phone to notify you of all
messages.
• Voice Messages sets your phone not to
sound a tone or vibrate when you receive
voice messages.
115
Setting Call Filtering
• Text Messages sets your phone not to sound
atoneorvibratewhenyoureceivetext
messages.
•Allsets your phone not to sound a tone or
vibrate when you receive any message.
Note: When you receive a type of message you
have set not to sound a tone or vibrate,
the message notification screen appears
as usual.
7Press Aunder Done.
116
Shortcuts
Shortcuts lets you access most menu options by
pressing a number on your keypad (1 through 9) or
saying the voice name of the shortcut. You create
theshortcutandthenuseittotakeyoutothat
screen any time.
Creating a Shortcut
Note: When you receive your phone, all number
keys may already be assigned to
shortcuts. If this is the case, you can
create new shortcuts by deleting or
replacing existing shortcuts.
1Go to the menu item you want to create a
shortcut for.
Forexample,ifyouwanttocreateashortcutto
the screen for creating a new Contacts entry:
From the main menu, select Contacts,then
highlight [New Contact].
2Press and hold muntil a confirmation screen
appears.
3Press Oor press Aunder Yes.
4Select Key.
5Press the number key you want to assign to the
shortcut.
6Press O.
7Ifyouwanttorecordavoicenameforthe
shortcut: Select Voice.Asdirectedbythe
screen prompts, say and repeat the name you
want to assign to the number. Speak clearly into
the microphone.
8Press Aunder Done.
9If the number key you chose is already assigned
to a shortcut, a prompt appears asking if you
want to replace the existing shortcut.
Press Aunder Yes to replace the existing
shortcut. -or-
Press Aunder No ifyouwanttokeepthe
existing shortcut and assign another number key
to the shortcut.
Using a Shortcut
If you know the shortcut number:
1From the idle screen, press m.
2On your keypad, press the number assigned to
the shortcut.
If you do not know the shortcut number:
1From the main menu, select Shortcuts.
117
Editing a Shortcut
2Scroll to the shortcut you want to use. -or-
Ifyouassignedavoicenametotheshortcut:
Press and hold t. Say the voice name into
your phone. The shortcut with that voice name is
then highlighted.
3Press O.
Editing a Shortcut
To change the number assigned to a shortcut:
1From the main menu, select Shortcuts.
2With any shortcut highlighted, press m.
3Select Reorder.
4Scroll to the shortcut you want to move.
5Press Aunder Grab.
6Scroll to the place where you want the shortcut
to appear.
7Press Aunder Insert.
8Repeat step 4 through step 7 for all the items
you want to move.
9Press Aunder Done.
To change the number or voice name assigned to
ashortcut:
1From the main menu, select Shortcuts.
2Highlight any shortcut.
3Press Aunder Edit.
4With Key or Voice highlighted, press Oto
change assignments.
Deleting Shortcuts
To delete a shortcut:
1From the main menu, select Shortcuts.
2Scroll to the shortcut you want to delete.
3Press m.
4Select Delete.
5Press Oor press Aunder Yes to confirm.
To delete all shortcuts:
1From the main menu, select Shortcuts.
2With any shortcut highlighted, press m.
3Select Delete All.
4Press Oor press Aunder Yes to confirm.
118
Understanding Status
Messages
You may receive status messages under certain
conditions. Before contacting Customer Care, note
the message, numeric code, and the conditions
under which it appeared. The following table lists
and describes the status messages.
Status
Messages Message Description
Number Not in
Service
The number that you entered is not
valid.
User Not
Available
The phone that you called is either
busy, out of coverage, or turned off.
Please try again later.
User Not
Authorized
The person that you called has not
purchased this service.
Please Try Later This service is temporarily not
available. Please try again later.
Service
Restricted
This service was restricted by your
service provider, or this service was
not purchased.
Service Not
Available
You are either out of coverage or
having problems with provisioning.
System Busy The system is experiencing heavy
traffic. Please try again later.
Service Conflict This service cannot be enabled
because an incompatible service has
already been turned on.
Please Try
Again
An error occurred. Please try again.
SIM PIN
incorrect. Try
again.
You have entered an incorrect PIN
number.
Please Enter
Special Code
You have inserted a SIM card that will
not work with a your service provider
phone. Contact Customer Care if you
believe this is a valid SIM card.
Self Check Error
+ Number Code
A fault was detected with your phone.
If this error recurs, note the error code
and contact Customer Care.
Self Check Fail
+ Number Code
An operational fault was detected with
your phone. Note the numeric code,
turn your phone off, and contact
Customer Care.
Status
Messages Message Description
119
PIN Blocked
Call Your
Provider
The incorrect PIN was entered 3
consecutive times. You will be unable
to place or receive calls on your
phone. Contact Customer Care to
have them obtain the PIN Unblocking
Key (PUK) code.
Insert SIM Your SIM card is not being detected.
Please check to ensure that you have
inserted the SIM card correctly into
your phone.
Enter SIM PIN Please enter your 4- to 8- digit SIM
PIN code.
Enter Unlock
Code
Auto Phone Lock is activated. Enter
your unlock code.
New Browser
Message
Memory Full!
Warns of low memory for Net Alerts.
Hardware
Failure A problem occurred in your phone’s
camera. If this error occurs, contact
your service provider.
Resource Not
Available Your phone’s camera is temporarily
unavailable for use. Please try again
later.
Status
Messages Message Description
Scanning for
Satellites
Searching for GPS satellites.
Unable to
Locate Sats
Could not find GPS satellites.
Technical Error A problem occurred in your phone’s
GPS circuitry. If this error occurs,
contact Customer Care.
Status
Messages Message Description
120
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING
YOUR INTEGRATED MULTI-SERVICE
PORTABLE RADIO.
RF Operational
Characteristics
Your radio product contains a radio frequency
transmitter to convey the information you wish to
send as well as occasional automatic signals used
to sustain connection to the wireless network, and
a receiver which enables you to receive
communication and connection information from
the network.
Portable Radio Product
Operation and EME Exposure
Your Motorola radio product is designed to comply
with the following national and international
standards and guidelines regarding exposure of
human beings to radio frequency electromagnetic
energy (EME):
•United States Federal Communications
Commission, Code of Federal Regulations; 47
CFR part 2 sub-part J.
•American National Standards Institute (ANSI) /
Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1992.
•Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1999 Edition.
•International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1998.
•Ministry of Health (Canada). Safety Code 6.
Limits of Human Exposure to Radiofrequency
Electromagnetic Fields in the Frequency Range
from 3 kHz to 300 GHz, 1999.
•Australian Communications Authority
Radiocommunications (Electromagnetic
Radiation - Human Exposure) Standard 2003.
•ANATEL, Brasil Regulatory Authority, Resolution
256 (April 11, 2001) “additional requirements for
SMR, cellular and PCS product certification.”
To assure optimal radio product performance
and make sure human exposure to radio
frequency electromagnetic energy is within the
guidelines set forth in the above standards,
always adhere to the following procedures:
121
Portable Radio Product Operation and EME Exposure
Phone Operation
When placing or receiving a phone call, hold your
radio product as you would a wireline telephone.
Speak directly into the microphone.
Two-way radio operation
When using your radio product as a
traditional two-way radio, hold the
radio product in a vertical position
with the microphone one to two
inches (2.5 to 5 cm) away from the lips.
Body-worn operation
To maintain compliance with FCC RF exposure
guidelines, if you wear a radio product on your
body when transmitting, always place the radio
product in a Motorola approved clip, holder,
holster, case or body harness for this product.
Use of non-Motorola-approved accessories may
exceed FCC RF exposure guidelines. If you do
not use a Motorola approved body-worn
accessory and are not using the radio product
in the intended use positions along side the
head in the phone mode or in front of the face
in the two-way radio mode, then ensure the
antenna and the radio product are kept the
following minimum distances from the body
when transmitting
• Phone or Two-way radio mode: one inch (2.5
cm)
• Data operation using any data feature with or
without an accessory cable: one inch (2.5
cm)
Antenna Care
Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the
radio product and may violate FCC regulations.
DO NOT hold the antenna when the radio
product is “IN USE”. Holding the antenna affects
call quality and may cause the radio product to
operate at a higher power level than needed.
Approved Accessories
For a list of approved Motorola accessories call
1-800-453-0920, or visit our website at
www.motorola.com/iden.
122
Safety and General Information
ALL MODELS WITH FCC ID AZ489FT5833 MEET THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radiofrequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg.1Tests for SAR are conducted using standard
operating positions reviewed by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum
value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that is does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the
body) as required by the FCC for each model. The highest
SAR value for this model phone when tested for use at the
ear is 0.93 W/kg and when tested on the body, as
described in this user guide, is 1.46 W/kg during packet
data transmission. (Body-worn measurements differ
among phone models, depending upon available
accessories and FCC requirements.)2
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
AZ489FT5833.
Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com.
1In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
2The SAR information reported to the FCC includes the
FCC-accepted Motorola testing protocol, assessment
procedure, and measurement uncertainty range for this
product.
123
Electro Magnetic Interference/Compatibility
Electro Magnetic
Interference/Compatibility
Note: Nearly every electronic device is
susceptible to electromagnetic
interference (EMI) if inadequately
shielded, designed or otherwise
configured for electromagnetic
compatibility.
Facilities
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your radio product in
any facility where posted notices instruct you to do
so. Hospitals or health care facilities may be using
equipment that is sensitive to external RF energy.
Aircraft
When instructed to do so, turn off your radio
product when on board an aircraft. Any use of a
radio product must be in accordance with
applicable regulations per airline crew instructions.
Medical Devices
Pacemakers
The Advanced Medical Technology Association
(AdvaMed) recommends that a minimum
separation of 6 inches (15 cm) be maintained
between a handheld wireless radio product and a
pacemaker. These recommendations are
consistent with those of the U.S. Food and Drug
Administration.
Persons with pacemakers should:
•ALWAYS keep the radio product more than 6
inches (15 cm) from their pacemaker when the
radio product is turned ON.
•Not carry the radio product in a breast pocket.
•Use the ear opposite the pacemaker to minimize
the potential for interference.
•Turn the radio product OFF immediately if you
have any reason to suspect that interference is
taking place.
Hearing Aids
Some digital wireless radio products may interfere
with some hearing aids. In the event of such
interference, you may want to consult your hearing
aid manufacturer to discuss alternatives.
124
Safety and General Information
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if it is adequately shielded from RF
energy. Your physician may be able to assist you
in obtaining this information.
Use While Driving
Check the laws and regulations on the use of radio
products in the area where you drive. Always obey
them.
When using the radio product while driving, please:
•Give full attention to driving and to the road.
•Use hands-free operation, if available.
•Pull off the road and park before making or
answering a call if driving conditions so require.
Operational Warnings
For Vehicles with an Air
Bag
Do not place a portable radio product in the area
over the air bag or in the air bag deployment area.
Air bags inflate with great force. If a portable radio
is placed in the air bag deployment area and the air
bag inflates, the radio product may be propelled
with great force and cause serious injury to
occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your radio product prior to entering any
area with a potentially explosive atmosphere,
unless it is a radio product type especially qualified
for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved).
Do not remove, install, or charge batteries in such
areas. Sparks in a potentially explosive
atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
Note: The areas with potentially explosive
atmospheres referred to above include
fueling areas such as below decks on
boats, fuel or chemical transfer or
storage facilities, areas where the air
contains chemicals or particles, such
!!
125
Operational Cautions
as grain, dust or metal powders, and
any other area where you would
normally be advised to turn off your
vehicle engine. Areas with potentially
explosive atmospheres are often but
not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting
operations, turn off your radio product when you
are near electrical blasting caps, in a blasting area,
or in areas posted: “Turn off two-way radio”. Obey
all signs and instructions.
Operational Cautions
Batteries
All batteries can cause property damage and/or
bodily injury, such as burns if a conductive material
such as jewelry, keys, or beaded chains touches
exposed terminals. The conductive material may
complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside
a pocket, purse, or other container with metal
objects. To reduce the risk of injury, batteries
should not be exposed to fire, disassembled, or
crushed.
Cleaning and Drying Considerations
Using a leather carry case may help protect the
surfaces and help prevent liquids (e.g., rain) from
entering into the interior of the radio product. This
product is not water proof, and exposing the unit to
liquids may result in permanent damage to the unit.
If your radio product interior gets wet, then do not
trytoacceleratedryingwiththeuseofanovenora
dryer as this will damage the radio product and
void the warranty. Instead, do the following:
1Immediately power off the radio product.
2Remove Battery and SIM card (if so equipped)
from radio product.
3Shake excess liquid from radio product.
4Place the radio product and battery in an area
that is at room temperature and has good air
flow.
5Let the radio product, battery, and SIM card dry
for 72 hours before reconnecting the battery
and/or powering on the radio product.
If the radio product does not work after following
the steps listed above, contact your dealer for
servicing information.
!
126
Safety and General Information
Clean the external surfaces of the radio product
withadampcloth,usingamildsolutionof
dishwashing detergent and water. Some
household cleaners may contain chemicals that
could seriously damage the radio product. Avoid
the use of any petroleum-based solvent cleaners.
Also, avoid applying liquids directly on the radio
product.
Accessory Safety Information
Important: Save these accessory safety
instructions.
•Before using any battery or battery charger, read
all the instructions for and cautionary markings
on (1) the battery, (2) the battery charger, which
may include a separate wall-mounted power
supply or transformer, and (3) the radio product
using the battery.
•Do not expose any battery charger to water,
rain, or snow as they are designed for indoor or
in-vehicle use only.
•To reduce the risk of damage to the cord or plug,
pull by the plug rather than the cord when you
disconnect the battery charger from the power
source outlet.
•Do not operate any battery charger with a
damaged cord or plug — replace them
immediately.
•Battery chargers may become warm during
operation, but not hot. If it becomes hot to the
touch, unplug it from the power outlet
immediately and discontinue its use.
•Use of a non-recommended attachment to a
battery charger may result in a risk of fire,
electric shock, or injury to persons.
•Make sure the battery charger power cord is
located so that it will not be stepped on, tripped
over, or subjected to damage or stress.
•An extension cord should not be used with any
battery charger unless absolutely necessary.
Use of an improper extension cord could result
in a risk of fire and electric shock. If an extension
cord must be used, make sure that:
•The pins on the plug of the extension cord are
the same number, size, and shape as those
on the plug of the charger.
•The extension cord is properly wired and in
good electrical condition.
Warning: To reduce the risk of injury,
charge only the rechargeable
batteries described in “Battery” on
page 3. Other types of batteries may
burst, causing personal injury and
damage.
!!
127
Accessory Safety Information
•The cord size is 18AWG for lengths up to 100
feet and 16AWG for lengths up to 150 feet.
•Do not operate any battery charger if it has
received a sharp blow, has been dropped, or
has been damaged in any way; take it to a
qualified service technician.
•Do not disassemble a battery charger; take it
toaqualifiedservicetechnicianwhenservice
or repair is required. Incorrect reassembly
may result in a risk of electric shock or fire.
•Maximum ambient temperature around the
power supply or transformer of any battery
charger should not exceed 40°C (104°F).
•The output power from the power supply or
transformer must not exceed the rating given
on the Desktop Dual-Pocket Charger.
•The disconnection from the line voltage is
made by unplugging the power supply from
the AC receptacle.
•To reduce risk of electric shock, unplug any
battery charger from the outlet before
attempting any maintenance or cleaning.
For optimum charging performance, turn off the
radio product while charging it in any battery
charger.
128
MOTOROLA LIMITED
WARRANTY
Note: FOR IDEN SUBSCRIBER PRODUCTS,
ACCESSORIES AND SOFTWARE
PURCHASED IN THE UNITED STATES
OR CANADA
What Does this Warranty Cover?
Subject to the exclusions contained below,
Motorola, Inc. warrants its Motorola iDEN Digital
Mobile and Portable Handsets ("Products"),
Motorola-branded or certified accessories sold for
use with these Products ("Accessories") and
Motorola software contained on CD-Roms or other
tangible media and sold for use with these
Products ("Software") to be free from defects in
materials and workmanship under normal
consumer usage for the period(s) outlined below.
Thislimitedwarrantyisaconsumer'sexclusive
remedy, and applies as follows to new
Products, Accessories and Software
purchased by consumers in the United States
or Canada, which are accompanied by this
written warranty:
PRODUCTS
COVERED LENGTH OF
COVERAGE
Products as defined
above. One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
Accessories as
defined above. One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
Products or
Accessories that are
Repaired or Replaced.
The balance of the
original warranty or
for ninety (90) days
from the date returned
to the consumer,
whichever is longer.
Software as defined
above. Applies only to
physical defects in the
media that embodies
the copy of the software
(e.g. CD-ROM, or
floppy disk).
Ninety (90) days from
thedateofpurchase.
129
What is not covered? (Exclusions)
Normal Wear and Tear. Periodic maintenance,
repair and replacement of parts due to normal wear
and tear are excluded from coverage.
Batteries. Only batteries whose fully charged
capacity falls below 80% of their rated capacity and
batteries that leak are covered by this limited
warranty.
Abuse & Misuse. Defects or damage that result
from: (a) improper operation, storage, misuse or
abuse, accident or neglect, such as physical
damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with
liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or
food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or
Accessory to abnormal usage or conditions; or (d)
other acts which are not the fault of Motorola, are
excluded from coverage.
Use of Non-Motorola Products and
Accessories. Defects or damage that result from
the use of Non-Motorola branded or certified
Products, Accessories, Software or other
peripheral equipment are excluded from coverage.
Unauthorized Service or Modification.Defects
or damages resulting from service, testing,
adjustment, installation, maintenance, alteration,
including without limitation, software changes, or
modification in any way by someone other than
Motorola, or its authorized service centers, are
excluded from coverage.
Altered Products. Products or Accessories with
(a) serial numbers or date tags that have been
removed, altered or obliterated; (b) broken seals or
that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or
non-Motorola housings, antennas, or parts, are
excluded from coverage.
Communication Services. Defects, damages, or
the failure of Products, Accessories or Software
due to any communication service or signal you
may subscribe to or use with the Products,
Accessories or Software is excluded from
coverage.
Software Embodied in Physical Media. No
warranty is made that the software will meet your
requirements or will work in combination with any
hardware or software applications provided by third
parties, that the operation of the software products
will be uninterrupted or error free, or that all defects
in the software products will be corrected.
130
MOTOROLA LIMITED WARRANTY
Software NOT Embodied in Physical Media.
Software that is not embodied in physical media
(e.g. software that is downloaded from the
internet), is provided "as is" and without warranty.
Who is covered? This warranty extends only to
the first consumer purchaser, and is not
transferable.
What will Motorola Do? Motorola, at its option,
will at no charge repair, replace or refund the
purchase price of any Products, Accessories or
Software that does not conform to this warranty.
We may use functionally equivalent
reconditioned/refurbished/pre-owned or new
Products, Accessories or parts. No data, software
or applications added to your Product, Accessory
or Software, including but not limited to personal
contacts, games and ringer tones, will be
reinstalled. To avoid losing such data, software
and applications please create a back up prior to
requesting service.
How to Obtain Warranty Service or Other
Information? To obtain service or information,
please call:
Motorola iDEN Customer Services
1-800-453-0920 or 954-723-4910
TTY-877-483-2840
Or visit us online at
http://www.motorola.com/iden/support
You will receive instructions on how to ship the
Products, Accessories or Software, at your
expense, to a Motorola Authorized Repair Center.
To obtain service, you must include: (a) a copy of
your receipt, bill of sale or other comparable proof
of purchase; (b) a written description of the
problem; (c) the name of your service provider, if
applicable; (d) the name and location of the
installation facility (if applicable) and, most
importantly; (e) your address and telephone
number.
What Other Limitations Are There? ANY
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
TO THE DURATION OF THIS LIMITED
WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED
UNDER THIS EXPRESS LIMITED WARRANTY IS
THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OF
IMPLIED. IN NO EVENT SHALL MOTOROLA BE
LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
131
PRODUCT, ACCESSORY OR SOFTWARE, OR
FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR
LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR DATA,
SOFTWARE OR APPLICATIONS OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY
TO USE THE PRODUCTS, ACCESSORIES OR
SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the
limitation or exclusion of incidental or
consequential damages, or limitation on the
length of an implied warranty, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights that vary
from state to state or from one jurisdiction to
another.
Laws in the United States and other countries
preserve for Motorola certain exclusive rights for
copyrighted Motorola software such as the
exclusive rights to reproduce and distribute copies
of the Motorola software. Motorola software may
only be copied into, used in, and redistributed with,
theProductsassociatedwithsuchMotorola
software. No other use, including without limitation
disassembly of such Motorola software or exercise
of the exclusive rights reserved for Motorola, is
permitted.
132
Limited Warranty Motorola Communication Products (International)
Limited Warranty
Motorola
Communication
Products (International)
Note: This Warranty applies in Singapore and
the Philippines.
I. What This Warranty Covers
and For How Long:
MOTOROLA warrants the MOTOROLA
manufactured iDEN Communication Products
listed below (“Product”) against defects in material
and workmanship under normal use and service
for a period of time from the date of purchase as
scheduled below:
Rechargeable Batteries will be replaced during the
applicable warranty period if:
a. the battery capacity falls below 80% of rated
capacity, or
b. the battery develops leakage.
MOTOROLA, at its option, will at no charge either
repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the terms of this
warranty. Replaced parts or boards are warranted
for the balance of the original applicable warranty
period. All replaced parts of Product shall become
the property of MOTOROLA.
This express limited warranty is extended by
MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party. This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability for
additions or modifications to this warranty unless
madeinwritingandsignedbyanofficerof
MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the original
end user purchaser, MOTOROLA does not warrant
the installation, maintenance or service of the
Product.
iDEN Subscriber Digital Mobile and
Portable Units One (1) Year
Product Accessories
(manufactured by or under license
from MOTOROLA)
One (1) Year
Batteries One (1) Year
133
MOTOROLA cannot be responsible in any way for
any ancillary equipment not furnished by
MOTOROLAwhichisattachedtoorusedin
connection with the Product, or for operation of the
Product with any ancillary equipment, and all such
equipment if expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole, or any portion of the system not
produced by MOTOROLA, under this warranty.
II. General Provisions:
This warranty sets forth the full extent of
MOTOROLA’S responsibilities regarding the
Product, Repair, replacement or refund of the
purchase price, at MOTOROLA’S options, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INLCUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY TO THE FULL EXTENT SUCH MAY
BE DISCLAIMED BY LAW. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS,
LOST PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE SUCH PRODUCT, TO THE
FULL EXTENT SUCH MAY BE DISCLAIMED BY
LAW.
III. How to Get Warranty
Service:
You must provide proof of purchase (bearing the
date of purchase and Product item serial number)
in order to receive warranty service and, also,
deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty
service location. Warranty service will be provided
by MOTOROLA through one of its authorized
warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer
or communication service provider), it can facilitate
your obtaining warranty service.
IV. What This Warranty Does
Not Cover:
a. Defects or damage resulting from use of the
Product in other than its normal and customary
manner.
134
Limited Warranty Motorola Communication Products (International)
b. Defects or damage from misuse, accident,
water, or neglect.
c. Defects or damage from improper testing,
operation, maintenance, installation, alteration,
modification, or adjustment.
d. Breakage or damage to antennas unless
caused directly by defects in material
workmanship.
e. A Product subjected to unauthorized Product
modifications, disassemblies or repairs
(including, without limitation, the audition to the
Product of non-MOTOROLA supplied
equipment).
f. Product which has had the serial number
removed or made illegible.
g. Rechargeable batteries if:
1.Any of the seals on the battery enclosure of
cells are broken or show evidence of
tampering.
2.The damage or defect is caused by
charging or using the battery in equipment
or service other than the Product for which it
is specified.
h. Freight costs to the repair depot.
i. A Product which, due to illegal or unauthorized
alteration of the software/firmware in the
Product, does not function in accordance with
MOTOROLA’S published specifications or the
local type acceptance labeling in effect for the
Product at the time the Product was initially
distributed from MOTOROLA.
j. Scratches or other cosmetic damage to
Product surfaces that does not effect the
operation of the Product.
k. Normal and customary wear and tear.
l. Exclusion for defects or damage arising from
use of the products in connection with
non-MOTOROLA equipment.
VI. Patent and Software
Provisions:
MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to the
extent that it is based on a claim that the Product or
parts infringe a patent, and Motorola will pay those
costs and damages finally awarded against the
end user purchaser in any such suit which are
attributable to any such claim, but such defense
and payments are conditioned on the following:
a. That MOTOROLA will be notified promptly in
writing by such purchaser of any notice of such
claim;
b. That MOTOROLA will have sole control of the
defense of such suit and all negotiations for its
135
settlement or compromise; and
c. Should the Product or parts become, or in
MOTOROLA’S opinion be likely to become, the
subject of a claim of infringement of a patent,
that such purchaser will permit MOTOROLA, at
its option and expense, either to procure for
such purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product or
parts as depreciated and accept its return. The
depreciation will be an equal amount per year
over the lifetime of the Product or parts as
established by MOTOROLA.
MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLAwhichisattachedtoorsuedin
connection with the Product or any parts thereof. In
no event shall MOTOROLA be liable for any
incidental, special or consequential damages
arising from any claim of patent infringement or
alleged infringement.
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software, such as the
exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product may
not be replaced, copied, distributed, modified in
any way, or used to produce any derivative thereof.
No other use including, without limitation,
alteration, modification, reproduction, distribution,
or reverse engineering of such MOTOROLA
software or exercise or rights in such MOTOROLA
software is permitted. No license is granted by
implication, estoppel or otherwise under
MOTOROLA patent rights or copyrights.
136
Using a Headset
Ifyouuseaheadsetorsimilardevicewithyour
phone, you can set your phone to send incoming
sound to the headset only, or to the headset and
the speaker at the same time:
1From the main menu, select Settings >
Advanced > Headset/Spkr.
2Select HdsetOnly to send incoming sound to
the headset only. -or-
Select Hdset&Spkr to send incoming sound to
the headset and ring tones to the speaker.
Note: If you are using your phone with a
headset, and you have the Flip to End
option set to On, closing your flip sends
incoming sound to the headset and does
not end the call. See “Setting Flip Actions”
on page 43.
Attaching a Headset
1Lift the audio jack cover.
2Insert the headset connector firmly into the
audio jack. You may have to rotate the headset
connector until it fits securely into the audio jack.
Using a Remote PTT Button
If you are using a headset or other accessory with
a remote PTT button, you can use the remote PTT
button for phone calls and Private calls.
For phone calls, use the remote PTT button to
answer calls, switch between calls, and end calls.
HoldtheremotePTTbuttonforlessthan2
seconds to answer calls and switch between calls.
Hold the remote PTT button for more than 2
seconds to end calls.
For Private calls, use the remote PTT button as
you would the PTT button on your phone.
Note: When using a headset, the PTT button on
your phone works the same way as when
you are not using a headset. Sounds
associated with Private calls and group
calls are heard through the headset.
137
Patent and Trademark
Information
MOTOROLA, the Stylized M Logo and all other
trademarks indicated as such herein are
trademarks of Motorola, Inc. ® Reg. U.S. Pat. &
Tm. Off. © 2004 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are
registered trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic
Communications.
T9®Text Input Patent and Trademark Information
This product is covered by U.S. Pat. 5,818,437,
U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending.
Java and all other Java-based marks are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
All other product names or services mentioned in
this manual are the property of their respective
trademark owners.
Software Copyright Notice
The Motorola products described in this manual
may include copyrighted Motorola and third party
software stored in semiconductor memories or
other media. Laws in the United States and other
countries preserve for Motorola and third party
software providers certain exclusive rights for
copyrighted software, such as the exclusive rights
to distribute or reproduce the copyrighted software.
Accordingly, any copyrighted software contained in
the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in
any manner to the extent allowed by law.
Furthermore, the purchase of the Motorola
products shall not be deemed to grant either
directly or by implication, estoppel, or otherwise,
any license under the copyrights, patents, or patent
applications of Motorola or any third party software
provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation
of law in the sale of a product.
138
Index
Numerics
2-way radio 108
seealsoPrivatecalls,group
calls, and call alerts
3-way calling 41
A
Accessories 16
safety 126
Airplane mode 106
Audio recordings 71
playing 71
B
Backlight 106, 107
Battery
care 5
charging 4, 5
door 3
inserting 4
safety 125
Baud rate 110
Blacklight
Java applications 106
C
Call alerts 22
deleting 23
queue 22
receiving 22
responding 22, 23
sending 22
sorting 23
viewing 23
Call filtering 114
Call forwarding 38
all calls 38
missed calls 39
off 38
Call Timers 45
Call Waiting 40
off 40
Calls
3-way 41
answering automatically 108
answering with any key 18,
107
emergency 21
ending 18
entering number 19
from Datebook 102
from memo 49
from recent calls 27
group, see Group calls
international 42
making 17
on hold 41
phone calls 17
Private calls 17, 42, 108
receiving 18
redialing 20, 107
remote PTT 136
Speed Dial 20
TTY, see TTY calls
Turbo Dial 20
voice name 19
Camera 63
seealsopictures
picture options 63
setting up 66
taking pictures 63
Circuit data 46
Clock 107
139
Contact information
receiving 25, 77
Send via PTT 76
sending 76
Contacts 29
accessing 30
capacity 35
creating entries 30
deleting 35
editing entries 32
icons 29
iDEN Phonebook Manager
37
international numbers 36
pictures 29, 30, 31, 34, 65, 70
ring tones 29, 30, 31
searching 34
showing all entries 35
showing only Private IDs 34
SIM card 29
storing fast 32
storing from idle screen 32
storing from Memo 32, 49
storing from recent calls 26,
32
type 29
voice name 32
with non-i860 phones 37
D
Datebook 98
copying events 101
creating events 99
deleting events 101
editing events 101
profiles 101
reminders 102
setting up 103
viewing 98
Display
backlight 106, 107
contrast 106, 107
options 8
screen 8
Drafts 61
see also MOSMS messages,
drafts
E
Email 29, 31, 46
Emergency calls 21
End key 2
F
Faxes
receiving 46
sending 46
Flip action 17, 18, 43
G
GPS Enabled 89
almanac data 94
best results 92
emergency calls 21, 90
map software 96
privacy options 95
security 95
viewing location 91
GPS PIN 110
GPS, see GPS Enabled
Group calls 44, 108
making 44
off 44
receiving 44
H
Handset, see phone
140
Index
Headset 136
I
Icons
Contacts 29
status 10
text entry 53
voice records 80
iDEN Phonebook Manager 37
Idle screen 8
creating MOSMS messages
60
storingtoContacts32
International numbers 42
calling 42
storing 36
J
Java applications 83
backlight 106
deleting 84
memory 85
K
Keypad 2
locking 109
L
Language 107
Lists, see menus
M
Media center 68
audio recordings 71
deleting 72
forward locked 69
locking 72
memory 73
pictures 70
renaming 72
viewing 68
Memo 49
calling from 49
creating 49
editing 49
storingtoContacts32, 49
viewing 49
Memory
Java applications 85
media center 73
MOSMS messages 62
ring tones 52
voice records 82
Menu key 2, 9
Menus 8
context-sensitive 2, 9
main menu 9
Message center 55, 57
seealsomessages
MOSMS messages 59
Message notifications 55
setting options 55
Messages 55
seealsovoicemail,MOSMS
messages, and SMS
messages
receiving 55
MOSMS messages 58
creating 59
deleting 61, 62
drafts 61
memory 62
message center 59
quick notes 60
receiving 58
sending 59
sent messages 61
141
setting up 58
sorting 62
Mute 21
My Info 78
editing 78
receiving 24, 77
Send via PTT 76
sending 76, 79
viewing 78
N
Navigation key 2
O
OK key 2, 9
One Touch PTT 42
Over-the-air programming 7
P
Packet data 46
Passwords 110
Patent information 137
Pauses
dialing 42
storing 35
Phone 1, 8
active line 107
flip action 17, 18, 43
locking 109
modem 45
off 6
on 6
only 110
setting up 2
Pictures 70
Contacts 29, 30, 31, 34, 65,
70
inserting in messages 65, 70
receiving 75
recent calls 26
Send via PTT 74
sending 70, 74
taking 63
Profiles 111
call filtering 114
changing settings 111
creating 113
Datebook 101
deleting 113
editing 113
switching 111
temporary 112
viewing 111
Programming, over-the-air 7
PUK code 13
Q
Quick notes 60
see also MOSMS messages,
Quick notes
R
Radio frequency 120
Recent calls 24, 27
call alerts 24
contact information 25
creating MOSMS messages
60
deleting 26
display time 110
pictures 26
storingtoContacts26, 32
viewing 25
Redialing 20, 107
Ring tones 50
deleting 52
142
Index
downloading 52
in Contacts 29, 30, 31, 51
memory 52
off 50
setting 50
vibrate 50
viewing assigned 51
Ringer 104
seealsoRingtones
off 104
S
Safety 120
accessory 126
battery 125
driving 144
electromagnetic interference
123
medical devices 123
radio frequency 120
Security 109
Send key 2
Send via PTT 74
see Pictures, sending
contact information 76
My Info 76
pictures 74
setting for pictures 76
Service provider 16
Service, activating 6
Settings 107
resetting 110
Shortcuts
creating 116
deleting 117
editing 117
using 116
SIM card 3, 11, 13
Contacts 29
inserting 14
removing 15
with non-i860 phones 37
SIM PIN 12, 109
changing 12
default 12
entering 12
requirement 12
unblocking 13
SMS messages 55, 58
also see MOSMS messages
58
Speakerphone 20
Speed Dial 20, 30, 32
Status messages 118
T
T9 Text Input, see text entry
Talkgroups 44, 108
Text display area 8
Text entry 53
database 53, 54
icons 53
mode 53
Word mode 53
Themes 104
Trademark information 137
TTY calls 46
baud rate 47
making 46
mode 47
on 47
Turbo Dial 20
143
V
Video 65, 71
Voice mail 55, 57
receiving 57
sending calls to 18, 57
setting up 39, 57
Voice name 19, 30
creating 32
Voice records 80
creating 80
deleting 82
icons 80
labelling 81
locking 81
memory 82
playing 81
viewing 80
Volume, setting 104, 109
W
Waits
dialing 42
storing 35
Wallpaper 65, 71, 105
Warranty 132
Word mode 53
144
Driving Safety Tips
“Safety is your most important call!”
Your Motorola wireless telephone gives you the
powerful ability to communicate by voice — almost
anywhere, anytime, wherever wireless phone
service is available and safe conditions allow. But
an important responsibility accompanies that
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first
responsibility. If you find it necessary to use your
wireless phone while behind the wheel of a car,
practice good common sense and remember the
following tips:
•Get to know your Motorola wireless phone and
its features such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
•When available, use a hands-free device. If
possible, add an additional layer of convenience
to your wireless phone with one of the many
Motorola Original hands-free accessories
available today.
•Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you receive
an incoming call at an inconvenient time, if
possible, let your voice mail answer it for you.
•Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice, and even heavy traffic can
be hazardous.
•If you receive an incoming call at an
inconvenient time do not take notes or look up
phone numbers while driving. Jotting down a “to
do” list or going through your address book
takes attention away from your primary
responsibility — driving safely.
•Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pullingintotraffic.Trytoplancallswhenyourcar
will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
•Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are
driving and suspend conversations which have
the potential to divert your attention away from
the road.
145
•Your phone can perform many other functions
besides allowing you to make and receive calls.
Do not let these features distract you from
driving. Use them only when it is safe to do so.
•Use your wireless phone to call for help. Dial
9-1-1 or other local emergency number in the
case of fire, traffic accident or medical
emergencies.
•Use your wireless phone to help others in
emergencies. If you see an auto accident, crime
in progress or other serious emergency where
lives are in danger, call 9-1-1 or other local
emergency number, as you would want others to
do for you.
•Call roadside assistance or a special
non-emergency wireless assistance number
when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be
stolen, call roadside assistance or other special
non-emergency wireless number.