Motorola Solutions 89FT5844 iDEN i850 with WiDEN, MOTOtalk User Manual i850Mot

Motorola Solutions, Inc. iDEN i850 with WiDEN, MOTOtalk i850Mot

users manual 1

Motorola
iDEN
Digital Multi-service Data-capable Phone
i850 Phone User’s Guide
APPROVAL DRAFT
@NNTN6135A@
NNTN6135A
i
Contents
Getting Started........................................... 1
Locating Your SIM Card....................................3
Battery...............................................................3
Activating Service..............................................6
Powering On and Off.........................................6
Enabling Over-the-Air Security..........................7
Phone Programming .........................................8
Finding Your Phone Number.............................8
Phone Basics ....................................................8
SIM Card Security ...........................................13
Antenna...........................................................18
Accessories.....................................................18
For More Information.......................................18
Making Calls............................................. 19
Phone Calls.....................................................19
Private Calls ....................................................19
Receiving Calls................................................20
Choosing a Number to Call .............................21
Missed Phone Calls.........................................22
Using Speakerphone.......................................22
Using Mute......................................................23
Making Emergency Phone Calls .....................23
MOTOtalkTM ..............................................24
Channels and Codes.......................................25
Private MOTOtalk Calls...................................27
Emergency Calls Using MOTOtalk .................28
Setup Options .................................................28
Call Alerts..................................................30
Sending Call Alerts..........................................30
Receiving Call Alerts .......................................30
Using the Call Alert Queue..............................30
Recent Calls..............................................32
Calls and Call Alerts........................................32
My Info From Other Phones............................32
Contact Information From Other Phones ........33
Viewing the Recent Calls List..........................33
Storing Items to Contacts................................34
Deleting Items .................................................35
Making Calls From the Recent Calls List ........35
ii
Contacts ................................................... 37
Accessing Contacts.........................................38
Creating Entries...............................................38
Storing Numbers Faster ..................................40
Editing Entries .................................................40
Viewing Entries................................................41
Deleting Entries...............................................43
Checking Capacity ..........................................43
Creating Pauses and Waits.............................44
International Numbers.....................................44
Making Calls From Contacts ...........................45
Accessing Contacts with GSM Phones...........45
Call Forwarding........................................ 47
Forwarding All Calls ........................................47
Turning Off Call Forwarding ............................48
Forwarding Missed Calls.................................48
Viewing Call Forwarding Settings....................49
Advanced Calling Features..................... 50
Call Waiting .....................................................50
Switching Between Calls.................................50
Putting a Call on Hold......................................51
Calling 2 People ..............................................51
Creating Pauses and Waits While Dialing.......52
Making International Calls...............................52
One Touch PTT...............................................52
Quick PTT .......................................................53
Setting Flip Actions .........................................54
Call Timers......................................................54
Using Your Phone as a Modem ......................55
Making TTY Calls............................................56
Group Calls and Selective Dynamic
Group Calls ...........................................59
Group Calls .....................................................59
Selective Dynamic Group (SDG) Calls ...........61
Memo .........................................................66
Ring Tones................................................67
Setting Your Phone to Vibrate.........................67
Ring and Vibrate .............................................68
Assigning Ring Tones to Contacts ..................68
Viewing Ring Tone Assignments ....................68
Downloading More Ring Tones.......................69
About DRM Ring Tones ..................................69
iii
Managing Memory...........................................69
Deleting Custom Ring Tones ..........................69
Entering Text............................................ 70
Using Word Mode............................................70
Special Function Keys.....................................71
Messages ................................................. 73
Message Notifications .....................................73
Message Center..............................................74
Voice Mail Messages............................... 75
Receiving a Message......................................75
Accessing Voice Mail from
the Message Center ...................................75
Sending Unanswered Calls to Voice Mail .......75
MOSMS Messages................................... 76
Setting Up........................................................76
Receiving a Message......................................76
Reading from the Message Center .................77
Creating and Sending Messages ....................77
Sorting Messages............................................80
Managing Memory...........................................80
Camera ......................................................81
Accessing the Camera ....................................81
Taking Pictures ...............................................81
More Actions for Captured Pictures ................83
Accessing the Media Center ...........................83
Customizing the Camera.................................84
Managing Memory ..........................................84
Media Center.............................................85
Viewing the Media Center...............................85
Forward Locked Items.....................................86
DRM Items ......................................................87
Pictures ...........................................................87
Audio Recordings............................................88
Renaming Items ..............................................89
Locking Items..................................................89
Deleting Items .................................................89
Accessing the Camera ....................................90
Managing Memory ..........................................90
Digital Rights Management .....................91
Installing Items ................................................91
Understanding DRM Status Icons...................91
iv
Sharing Items ..................................................91
Managing DRM Items......................................92
Using Send via PTT ................................. 95
Sending a Picture ............................................95
Receiving a Picture .........................................96
Sending My Info and Contact Information.......97
My Info .................................................... 100
Viewing My Info.............................................100
Editing My Info...............................................100
Setting Sending Options................................101
Datebook ................................................ 102
Viewing Datebook .........................................102
Creating Events.............................................103
Editing Events ...............................................105
Deleting Events .............................................105
Receiving Reminders ....................................106
Making Calls From Datebook and Datebook
Reminders ................................................106
Customizing Datebook Setup........................107
Java Applications...................................109
Installing Applications....................................109
Running Applications ....................................109
Suspending Applications...............................109
Resuming Applications..................................110
Ending Applications.......................................110
Downloading Applications.............................110
Deleting Applications.....................................110
Managing Memory ........................................111
Shortcuts on the Main Menu .........................111
Java Applications and GPS Enabled ............112
GPS Enabled...........................................115
IMPORTANT: Things to Keep in Mind ..........115
Making an Emergency Call ...........................117
Viewing Your Approximate Location .............118
Enhancing GPS Performance .......................119
Updating Satellite Almanac Data ..................120
Setting Privacy Options.................................121
Using GPS with Map Software......................122
Voice Records ........................................125
Viewing Voice Records .................................125
v
Creating Voice Records ................................125
Playing Voice Records ..................................126
Labeling Voice Records ................................126
Locking Voice Records..................................126
Deleting Voice Records.................................127
Managing Memory.........................................127
Customizing Your Phone...................... 128
Setting the Volume........................................128
Setting Your Phone to Vibrate.......................128
Changing the Look of Your Phone ................128
Airplane Mode—Temporarily Turning
Off Calls....................................................130
Using Settings ...............................................130
Profiles ................................................... 135
Viewing Profiles.............................................135
Switching Profiles ..........................................135
How Changing Settings Affects Profiles........135
Temporary Profiles ........................................136
Creating Profiles............................................137
Editing Profiles ..............................................137
Deleting Profiles ............................................137
Setting Call Filtering ......................................138
Shortcuts.................................................140
Creating a Shortcut .......................................140
Using a Shortcut............................................140
Editing a Shortcut..........................................141
Deleting Shortcuts.........................................141
Using a Headset .....................................142
Attaching a Headset......................................142
Using a Remote PTT Button .........................142
Understanding Status Messages..........143
Safety and General Information ............145
RF Operational Characteristics .....................145
Portable Radio Product Operation and EME
Exposure...................................................145
Electromagnetic Interference/
Compatibility.............................................148
Medical Devices ............................................148
Operational Warnings ...................................149
Operational Cautions ....................................150
Accessory Safety Information .......................151
vi
MOTOROLA LIMITED WARRANTY ...... 153
Limited Warranty
Motorola Communication Products
(International) ..................................... 157
Patent and Trademark Information ...... 161
Index ....................................................... 162
Driving Safety Tips ................................ 169
IMPORTANT NOTICE: PLEASE READ
PRIOR TO USING YOUR PHONE
The SIM card provided in this kit is intended for use with
the phone provided in this package.
Loss of certain features will result when using a SIM
card from one of the following models: i30sx, i35s,
i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl
series, and the i2000 series.
For more information on SIM card compatibility, go to
www.motorola.com/iden/support.
Defects or damage to your Motorola phone that result
from the use of non-Motorola branded or certified
Accessories, including but not limited to replacement
housings and or other peripheral accessories, are
excluded from warranty coverage. Please refer to the
text of Motorola's Limited One Year warranty located in
this user’s guide for complete details.
viii
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i850
Model Number: H65XAN6RR4AN
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)
Class B Digital Device
As a personal computer peripheral, this device
complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
1
Getting Started
P
ush-To-Talk
(
PTT) button
accessory
connector
speaker
(in back)
mirror
volume
controls
camera lens
retractable
antenna
audio jack
c
p
light sensor
power button
camera key
microphone
2
Getting Started
To start using your i850 phone:
Make sure your SIM card is in place.
Charge the battery.
Activate your service.
Enable over-the-air security if you are prompted
to.
pPower button.
Navigation key — press the arrows to
scroll through menus and lists.
OOK key — selects highlighted item;
answers calls.
mMenu key — accesses context-sensitive
menus.
AOption key — selects the option
appearing above it on the display.
sSend key — places phone calls.
eEnd key — ends phone calls; returns to
idle screen.
c
tActs like s when the flip is closed; turns
speaker on; used with voice names and
voice records.
.Acts like e when the flip is closed;
accesses recent calls; sends incoming
calls to voice mail.
cCamera key — accesses camera;
captures picture.
3
Locating Your SIM Card
Locating Your SIM Card
Your SIM (Subscriber Identity Module) card is a
small piece of plastic located in the SIM card
holder in the back of your phone, underneath the
battery.
If your SIM card is not in the SIM card holder, it
may be in the box your phone came in, attached to
a piece of plastic about the size of a credit card. If
this is the case, carefully detach your SIM card
from the surrounding plastic and insert it as
described in “Inserting Your SIM Card” on page 15.
If there is no SIM card in your phone or the box,
contact your service provider.
Battery
Removing the Battery Door
1Make sure the phone is powered off. See
“Powering On and Off” on page 6.
2Slide the release button back until it releases the
battery door.
.
SIM card
release
button
4
Getting Started
3Allow the battery door to pop up, slide it forward,
and remove it from the back of your phone.
Inserting the Battery
Your phone comes with a Standard Lithium Ion
Battery.
1Remove the battery door.
2Insert the battery into the battery area. Press the
battery down to secure it.
3Replace the battery door and press it gently until
you hear a click.
Charging the Battery
Your phone comes with a rapid travel charger.
1Plug the charger into an electrical outlet.
5
Battery
2Open the connector cover.
3Plug the other end of the charger into the
accessory connector.
Charger Attached or Device Attached appears
on the internal display.
Tip: To remove the charger from the accessory
connector: Press the buttons on the sides
of the plug. Pull the plug straight out.
4If you have purchased optional batteries or
chargers, see “Charging Times”.
Charging Times
See your battery and charger to determine the
appropriate charging time.
For best results, charge the batteries within the
temperature range of 50°F to 10F (10°C to
40°C).
Prolonged charging is not recommended.
connector
cover
Battery Charger
Rapid Standard
High
Performance 2 hours 4 hours
Maximum
Capacity 3.5 hours 7.5 hours
6
Getting Started
Removing the Battery
1With the phone powered off, remove the battery
door.
2Remove the battery by pushing it toward the
antenna and lifting it out.
Battery Use and Maintenance
The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
F (-20°C).
Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.
Activating Service
The first time you power on your phone, you must
be in your local calling area. This activates your
service.
Powering On and Off
The first time you power your phone on, a screen
may appear asking you to update your browser
information. This means you must enable security.
To power your phone on:
1Open the flip.
2Press p.
Note: When powering on, if you press p for
more than 5 seconds, you will turn on
Airplane mode. See “Airplane Mode—
Temporarily Turning Off Calls” on page
130.
7
Enabling Over-the-Air Security
To power your phone off:
1Open the flip.
2Press and hold p.
When You Power On For the First
Time
If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See “Entering the PIN” on page 13.
Press A under Ok.
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card (see “Changing the PIN” on page
13).
As your phone connects to the network, you will
see a welcome message and a connecting
message. When the idle screen appears, the
phone is ready to use.
Enabling Over-the-Air
Security
If you are set up to receive over-the-air
programming from your service provider, you must
enable security the first time you power on your
phone or within 10 days of first activation of your
phone:
1When you power on your phone for the first time,
after the idle screen appears, you will be
prompted to select Ok to update your browser
information.
8
Getting Started
Note: If you press A under Later, you will be
prompted to enable security each time
you power on your phone until you press
A under Ok.
2Press A under Ok.
3You are prompted to enable security. Press A
under Yes. A series of screens appears. If you
subscribe to your service provider’s plan, your
home page appears.
4Press e to return to the idle screen.
Phone Programming
Within 24 hours of enabling security, you may
receive an alert notification containing your Private
ID and Talkgroup lists for Private calls.
To accept programming:
1When you receive an alert notification saying
New Browser Message - Receive
Programming Info, press O or press A under
Goto.
2You are prompted to accept changes to your
lists. Press O or press A under Ok.
3If you are prompted again to accept changes to
your lists, press O or press A under Ok.
4A confirmation screen displays. Press O or
press A under Ok.
5Press e to return to the idle screen.
Finding Your Phone Number
My Info lets you view your phone number, Private
ID, and other phone information:
1Press m to access the main menu.
2Scroll to My Info.
3Press O.
4Scroll to see your information.
Line 1 and Line 2 are your phone numbers.
Private is your Private ID, the number that others
use to contact you using Private service. These
numbers appear when you receive your alert
notification after enabling security on your phone.
See “My Info” on page 100 for more information
about this feature.
Phone Basics
Any time your phone is powered on, the display
provides you with information and options.
9
Phone Basics
The external display shows a shortened version of
the internal display. To see more information, open
the flip.
The screen shown is the idle screen. The text that
appears on your idle screen depends on your
service provider. The idle screen appears when
your phone is on, but not engaged in any activity.
Text Area
This area displays menus, messages, names,
phone numbers, and other information.
Display Options
Two display options appear at the bottom of most
screens. You select a display option by pressing
the option key below it.
Menus and Lists
Your phone’s features are arranged in menus,
submenus, and lists.
To access the items in a menu or list, scroll using
the navigation key at the top of your keypad. This
key lets you scroll up, down, left, or right. Holding
down the appropriate part of the navigation key
speeds up scrolling.
In this guide, this symbol > tells you to select a
menu or list item. For example, Settings >
Security means:
1Scroll to Settings on the main menu.
2Press O to see the Settings screen.
3Scroll to Security.
4Press O to see the Security screen.
OK Key
Pressing O:
Selects the highlighted menu item or list item
Sets options
status icons
text area
menu icon
display options
10
Getting Started
Confirms actions
Places and answer calls
Menu Key
Many features provide context-sensitive menus
that let you access related features and actions.
This icon S appears any time a context-sensitive
menu is available. Press m to access the menu.
Main Menu
All your phone’s features can be accessed through
the main menu. You can set the main menu to
appear as a list or as large icons.
* Selective Dynamic Group Calling (SDGC) may not be offered by
your service provider.
aBrowser Browse the Web.
qJava Apps Java applications on your
phone. See page 109.
bSettings Customize your phone.
See page 128.
cVoiceRecord Record and play audio
messages. See page 125.
dContacts Create, view, store, edit
Contacts and SDG lists*.
See page 37.
* Selective Dynamic Group Calling
(SDGC) may not be offered by
your service provider.
eMessages Access messages. See
page 53.
fCall Forward Set call forwarding options.
See page 47.
oDatebook Schedule appointments.
See page 102.
gMemo Store a number to access
later. See page 66.
hCall Timers Phone usage information.
See page 54.
iRecent Calls Lists recent calls. See
page 32.
sShortcuts Create shortcuts to
screens. See page 140.
jMy Info View personal phone
information, including
phone number and Private
ID. See page 8.
11
Phone Basics
Quick Access to Main Menu Items
Each arrow in the navigation key and O can be
used to access a main menu item from the idle
screen. Each of these keys is assigned to a main
menu item when you receive your phone. To
assign different main menu items, see “Personalize
Features” on page 132.
Status Icons
Status icons appear at the top of the display. Some
appear at all times. Others appear only when your
phone is engaged in certain activities or when you
have activated certain features.
pProfiles Groups of settings you
apply together. See
page 135.
kCall Alert Lists call alerts. See
page 30.
lGPS Find your approximate
geographical location. See
page 115.
mRing Tones Assign ring tones and turn
ringer off. See page 67.
mMOTOtalk Launch/Exit MOTOtalk.
Access MOTOtalk Setup
and Help. See page 24.
CCamera Access camera and take
pictures. See page 78.
mMedia Center Access stored pictures and
audio recordings. See
page 85.
QQuick PTT Access any Private IDs and
SDG lists* on your phone.
See page 53.
* Quick PTT and Selective Dynamic
Group Calling (SDGC) may not be
offered by your service provider.
abcd
efgd
Battery Strength — A fuller battery
indicates a greater charge.
o p q r
s
Signal StrengthMore bars next
to the antenna indicate a stronger
signal.
APhone In UseYour phone is
active on a phone call.
BPrivate In Use — Your phone is
active on a Private call.
CTalkgroup In Use Your phone is
active on a group call.
12
Getting Started
Entering Numbers From the Keypad
To enter numbers at the idle screen or any screen
that requires you to enter numbers, press the
numbers on the keypad.
If you make a mistake:
To clear a digit, press A under Delete.
To clear all digits, press and hold A under
Delete.
To insert or delete a digit anywhere in the string
of digits you have entered, scroll left or right.
To cancel, press e.
SSDG Call In Use— Your phone is
active on a SDG call.*
* Selective Dynamic Group Calling (SDGC)
may not be offered by your service provider.
1 2Active Phone Line — 1 indicates
phone line 1 is ready to make calls;
2 indicates phone line 2 is ready to
make calls.
mMOTOtalk Your phone is set to
MOTOtalk mode.
G J
H K
I L
Call Forward — Your phone is set
to forward calls. See page 47.
u M Q Ringer Off — Your phone is set not
to ring. See page 67.
w xT
yz
Messages — You have one or
more messages. See page 55.
DE Internet — You are ready to
browse the internet.
UAirplane Mode — Your phone is
set to airplane mode. See
page 130.
Y ZPacket DataYou are ready to
transfer packet data or are
transferring packet data. See
page 55.
N O TTY — You are ready to use your
phone to make calls using a
teletypewriter device. See page 56.
tRoaming You are using your
phone outside your carrier's
network.
13
SIM Card Security
SIM Card Security
Your SIM card protects your personal information.
The SIM card stores all your Contacts information.
Since this information is stored on your SIM card,
not in your phone, you can remove the information
by removing your SIM card.
Note: Except for making emergency calls, your
phone will not function without the SIM
card.
To prevent unauthorized use of your phone, your
SIM card may be protected by a PIN that you enter
each time the phone is powered on. You can
change the PIN or turn off the requirement that it
be entered.
Entering the PIN
You may be required to enter a SIM PIN when you
first use your phone.
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card.
Important: If you enter your PIN incorrectly 3 times,
your SIM card is blocked. To unblock
your SIM card, you must contact your
service provider. See “Unblocking the
PIN” on page 14.
1When the Enter SIM PIN Code screen appears,
enter your SIM PIN. An asterisk appears for
each character entered.
2Press A under Ok.
Changing the PIN
1From the main menu, select Settings >
Security > Change Password > SIM PIN.
2At the Enter Old SIM PIN screen, enter the
current SIM PIN.
3Press A under Ok.
4At the Enter New SIM PIN screen, enter the
new 4- to 8-digit SIM PIN.
5Press A under Ok.
6At the Re-enter New SIM PIN screen, re-enter
the new SIM PIN to confirm.
7Press A under Ok.
14
Getting Started
Turning the PIN Requirement On and
Off
When the SIM PIN requirement is on, you are
prompted to enter your PIN each time you turn on
your phone.
Note: If a SIM PIN is required, your phone will
not function until the SIM PIN is entered,
except for making emergency calls.
When the PIN requirement is off, your phone can
be used without entering a PIN.
Important: When the SIM PIN requirement is off,
the personal data on your SIM card is
not protected. Anyone can use your
phone and access your personal data.
1From the main menu, select Settings >
Security > SIM PIN.
2Select On or Off.
3Enter the current SIM PIN.
4Press A under Ok.
Unblocking the PIN
If you enter your PIN incorrectly 3 times, your SIM
card is blocked. To unblock your SIM card, you
must contact your service provider to get a PIN
Unblock Code (PUK).
Important: If you unsuccessfully enter the PUK
code 10 times, your SIM card is
permanently blocked and must be
replaced. If this happens, all data is
lost. You will get a message to contact
your service provider. Except for
making emergency calls, your phone
will not function with a blocked SIM
card.
To unblock the PIN:
1Press * # m 1.
2At your service provider representative’s
request, provide the information needed to give
you a PUK code.
3Select Unblock PIN.
4Enter the PUK code.
5Enter a new 4- to 8-digit SIM PIN.
6Re-enter your SIM PIN.
If you entered the codes properly, SIM Unlocked
appears on the display.
15
SIM Card Security
Inserting and Removing Your SIM
Card
Important: Do not touch the gold-colored areas of
your SIM card.
Switching SIM Cards
Moving your SIM card from one phone to another
moves all your Contacts information, but erases
other information. If you remove your SIM card and
use it with another phone, or use another SIM card
with your phone, the following information is
erased:
The recent calls list
Call forwarding settings
Net alerts
MOSMS drafts, outbox messages, and
customized quick notes
Information stored in Memo
Pictures and audio recordings in the media
center, except those that are forward locked
3 most recent GPS Enabled locations
Voice records
Voice names
Datebook events
Options set using the Personalize menu
Inserting Your SIM Card
1With your phone powered off, remove the
battery door and battery.
2Slide the latch away from the SIM card holder.
latch
16
Getting Started
3Open the SIM card holder.
4Carefully slide your SIM card into the SIM card
holder.
5Close the SIM card holder.
6Slide the latch toward the SIM card holder.
Removing Your SIM Card
Important: To avoid loss or damage, do not remove
your SIM card from your phone unless
absolutely necessary.
1With your phone powered off, remove the
battery door and battery.
17
SIM Card Security
2Slide the latch away from the SIM card holder.
3Open the SIM card holder.
4Carefully slide your SIM card out of the SIM card
holder.
5Close the SIM card holder.
6Slide the latch toward the SIM card holder.
Note: Protect your SIM card as you would any
delicate object. Store it carefully.
latch
18
Getting Started
Antenna
The retractable antenna on your i850 phone is
designed to be extended during calls.
To extend the antenna, pull gently on the rounded
tip until the antenna is fully extended and clicks into
position.
When finished with a call, retract the antenna by
pushing gently on the rounded tip until the antenna
clicks into place.
To optimize your phone’s performance, extend the
antenna when you make or receive a call, and
avoid touching the antenna with any body part.
Important: Failure to fully extend or retract the
antenna until the antenna clicks into
place causes severely degraded
performance, which may result in
missed calls, dropped calls, or garbled
audio.
Accessories
To order accessories, log on to our Web site at
www.motorola.com/store/iden or contact your
Motorola Authorized Retailer.
For More Information
If you have questions about your i850 phone,
contact your sales representative or your service
provider.
19
Making Calls
Your i850 phone makes two types of calls: digital
cellular phone calls and Private calls. With Private
calls, you use your phone as a long-range, digital
walkie-talkie.
Phone Calls
With the Flip Open
1Enter the number you want to call.
2To place the call:
Press s. -or-
If you entered the number from the idle screen,
press O.
3To end the call:
Press e. -or-
Close the flip.
To end a call by closing the flip, you must have the
Flip to End feature turned on (see “Setting Flip
Actions” on page 54).
With the Flip Closed
You can make phone calls with the flip closed
using a voice name or the recent calls list to select
the number you want to call. See “Using a Voice
Name” on page 21 and “Making Calls From the
Recent Calls List” on page 35.
To end the call, press ..
Private Calls
1If the flip is open, enter the Private ID you want
to call. -or-
If the flip is closed, choose the number as you
would when making a phone call.
2Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3Release the PTT button to listen.
4To end the call:
If the flip is closed, press .. -or-
Press e. -or-
Press A under Exit. -or-
Close the flip.
A Private call ends automatically if there is no
activity on the call for a few seconds.
20
Making Calls
Tip: To let someone know you want to talk to
him or her on a Private call, send a call
alert. See “Call Alerts” on page 30.
Receiving Calls
Phone Calls
When you receive a phone call, your phone rings,
vibrates, or lights up its backlight.
Answering
If the flip is closed, press t. -or-
Open the flip. -or-
Press s. -or-
Press O. -or-
Press A under Yes. -or-
Press any number key.
To answer a call by opening the flip, you must have
the Flip to Ans feature turned on (see Setting Flip
Actions” on page 54). To answer a call by pressing
any number key, you must have the Any Key Ans
feature turned on (see “Phone Calls Features” on
page 131).
Sending to Voice Mail
If the flip is closed, press .. -or-
Press e. -or-
Press A under No.
Ending
If the flip is closed, press .. -or-
Press e. -or-
Close the flip.
Private Calls
When you receive a Private call, your phone emits
a chirping sound or vibrates.
Answering
1Wait for the caller to finish speaking.
2Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3Release the PTT button to listen.
Ending
If the flip is closed, press .. -or-
Press e. -or-
Press A under Exit. -or-
Close the flip.
A Private call ends automatically if there is no
activity on the call for a few seconds.
21
Choosing a Number to Call
Choosing a Number to Call
You can choose the number you want to call in
many ways:
Enter the number on the keypad. See “Entering
Numbers From the Keypad” on page 12.
Say a voice name into your phone. See “Using a
Voice Name” on page 21.
Use Speed Dial or Turbo Dial® to make a phone
call. See “Using Speed Dial and Turbo Dial®” on
page 22.
Redial the last phone number called. See
“Redialing the Last Number” on page 22.
Select the number from the recent calls list. See
“Making Calls From the Recent Calls List” on
page 35.
Select the number from Contacts. See “Making
Calls From Contacts” on page 45.
Select a number stored in Datebook. See
“Making Calls From Datebook and Datebook
Reminders” on page 106.
Use One Touch PTT to make a Private call. See
“Setting Flip Actions” on page 54.
Use the number in Memo. See “Memo” on page
66.
Select the number in a text message you have
received. See “Receiving a Message” on page
76.
Using a Voice Name
If you have created a voice name in Contacts for
the number you want to call, say the voice name
into your phone to enter the number. See page 40
for information on voice names.
You can use a voice name to enter a number with
the flip open or closed.
1Press and hold t until a prompt appears telling
you to say the voice name.
2Speaking into the microphone, say the voice
name assigned to the number you want to call.
Your phone plays the name back to you.
3If you are making a phone call, the call is placed
automatically.
Tip: To stop a phone call from being completed,
press . if the flip is closed or press e.
If you are making a Private call or a SDG call,
press and hold the PTT button to place the call.
22
Making Calls
Using Speed Dial and Turbo Dial®
Each phone number stored in Contacts is assigned
a Speed Dial number, which you can use to call
that number.
Speed Dial
1From the idle screen, use the keypad to enter
the Speed Dial number assigned to the phone
number you want to call.
2Press #.
3Press s.
Turbo Dial
From the idle screen, press and hold the Speed
Dial number (1 through 9) assigned to the phone
number you want to call.
Redialing the Last Number
Press and hold s to place a call to the last phone
number you called.
Missed Phone Calls
When you miss a call, this icon V and the number
of phone calls you have missed appear briefly.
With the Flip Open
If you want to dismiss the missed call message,
press A under Back. -or-
If you want to view the missed call on the recent
calls list, press A under View.
With the Flip Closed
If you want to dismiss the missed call message,
press ..
If you want to view the missed call on the recent
calls list, press . twice.
Using Speakerphone
Turning on speakerphone makes incoming sound
come out of the phone’s speaker instead of the
earpiece. Speakerphone is available whenever you
are on an active phone call.
With the Flip Open
To turn speakerphone on or off:
Press A under Spkr. -or-
Press t.
23
Using Mute
With the Flip Closed
When you make a call with the flip closed,
speakerphone is always on.
Opening the flip turns speakerphone off.
Using Mute
Muting calls lets you listen to incoming sound
without transmitting sound. Mute is available
whenever you are on an active call.
To turn mute on:
Press A under Mute.
While mute is on, Unmute appears as a display
option.
To turn mute off:
Press A under Unmute.
Making Emergency Phone
Calls
Your phone supports emergency calling.
Emergency phone calls can be made even when
your SIM card is blocked or not in your phone.
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
When you make an emergency call, your phone’s
GPS Enabled feature can help emergency service
personnel find you, if you are in a location where
your phone's GPS antenna has established a clear
view of the open sky and your local emergency
response center has the equipment to process
location information. See “GPS Enabled” on page
115, and particularly “IMPORTANT: Things to
Keep in Mind” on page 115 and “Making an
Emergency Call” on page 117, for more
information on the limitations of this feature.
Because of the limitations of this feature, always
provide your best knowledge of your location to the
emergency response center when you make an
emergency call.
Important: Emergency calls cannot be placed while
the keypad is locked.
Important: If you have not registered on the
network, emergency calls cannot be
placed while your SIM card is in your
phone.
24
MOTOtalkTM
MOTOtalkTM
With MOTOtalk, you can make and receive 2-way
radio calls without network coverage. If you are
travelling outside your service provider's coverage
area, receiving a poor signal, or otherwise want to
temporarily avoid using your service provider's
network, you can switch to MOTOtalk and talk with
anyone on your code and channel who is within
range.
Note: Range will vary based on terrain,
man-made structures and atmospheric
conditions.
MOTOtalk lets you:
Use code or private mode operation
Use up to 10 channels
Communicate with standalone MOTOtalk radios
Note: You cannot use MOTOtalk with older
Family Radio Services products.
The following features and main menu items are
unavailable while in MOTOtalk:
On-network phone calls
On-network Private calls
Data transmission
Incoming message notification
Musical ring tones
Call forwarding
Messages
Call Timers
Call alerts
Voice records
Switching to MOTOtalk
To set your phone to MOTOtalk:
1From the main menu, scroll to MOTOtalk and
press A under Select or press O.
2Select Go to MOTOtalk.
Switching to MOTOtalk Please Wait displays.
After a few seconds, the MOTOtalk idle screen
displays. When MT Ready displays, you can
begin using MOTOtalk.
While in MOTOtalk, this icon m displays.
Exiting MOTOtalk
To switch to network mode:
1From the MOTOtalk idle screen, press m.
2Scroll to MT Options and press A under
Select.
25
Channels and Codes
3Select Exit MOTOtalk.
Tip: You can also exit MOTOtalk from the
MOTOtalk idle screen by pressing e for 3
seconds.
Switching to Network Please Wait displays.
After a few seconds, the network idle screen
appears.
Talk Range
While in MOTOtalk mode, phones should be a
minimum of 6 feet apart to maximize performance
and improve transmission range.
Channels and Codes
Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies.
Other parties may be talking on the same channel.
Codes minimize interference from other parties
when you are sharing the same channel.
MOTOtalk opens to the last code and channel
used on your phone. You can view the code and
channel your phone is currently set to on the
MOTOtalk idle screen.
For code calls, all parties must be on the same
channel and code. For private MOTOtalk calls, the
person you are calling must be in MOTOtalk and
set to the same channel to receive your call.
Note: When making a code call, all parties that
are on your code and channel can hear
your conversation.
Setting Channels and Codes
To set a channel:
1From the MOTOtalk idle screen, press A under
Edit.
2Scroll to Channel.
3Press A under Edit.
4Select a channel.
5When you are finished, press A under Back to
return to the MOTOtalk idle screen.
To set a code:
1From the MOTOtalk idle screen, press A under
Edit.
2Scroll to Code.
3Press A under Edit.
4Select a code.
5When you are finished, press A under Back to
return to the MOTOtalk idle screen.
26
MOTOtalkTM
Making Code Calls
To make a code call:
1From the MOTOtalk idle screen or the channel
and code edit screen, press and hold the PTT
button. MT Transmit appears on the first line of
display. Begin speaking after your phone emits
the MOTOtalk tone.
Note: The MOTOtalk tone consists of 4 rapid
beeps.
2Release the PTT button to listen.
If you receive an error message:
No one is on your channel or code.
You are out of range.
Receiving Code Calls
When you receive a code call, MT Receive will
appear on the display. After hearing the MOTOtalk
tone, you have 6 seconds within which to reply
before the call times out.
To reply to the call, press the PTT button.
Note: An incoming MOTOtalk call can be
terminated at any time by pressing e.
Receiving All MOTOtalk Calls
If you set the code to Receive All, your phone can
receive MOTOtalk transmissions from any phone
that is set to the same channel, regardless of the
code (1-15). When you receive transmissions with
the code set to Receive All, the code that the
transmission was received on will replace Receive
All on the display.
Note: You cannot initiate a code call when the
code is set to Receive All.
To set the code to Receive All:
1From the MOTOtalk idle screen, press A under
Edit.
2Scroll to Code.
3Press A under Edit.
4Select Receive All.
5When you are finished, press A under Back to
return to the MOTOtalk idle screen.
To reply to a call with the code set to Receive All:
Press the PTT button.
27
Private MOTOtalk Calls
Private MOTOtalk Calls
If you want to have a private conversation without
other parties listening in, you can make a private
MOTOtalk call. The person you are calling must be
in MOTOtalk and set to the same channel to
receive your call.
To make a private MOTOtalk call, enter the
10-digit Personal Telephone Number (PTN) of
the person you are calling.
If you receive an error message:
The PTN you entered is invalid.
The person that you are trying to reach is in
network mode.
The person that you are trying to reach is set to
a different channel.
The person that you are trying to reach is out of
range.
Private Only
To set MOTOtalk to ignore code calls, so that you
only make or receive private MOTOtalk calls, set
your code to Pvt Only.
To set the code to Pvt Only:
1From the MOTOtalk idle screen, press A under
Edit.
2Scroll to Code.
3Press A under Edit.
4Select Pvt Only.
Making a Private MOTOtalk Call
1Enter the 10-digit PTN of the person you want to
call on your channel. -or-
Scroll to a number or name in Contacts. -or-
Scroll to a number in the recent calls list.
2Press and hold the PTT button. Begin speaking
after your phone emits the MOTOtalk tone.
3Release the PTT button to listen.
The number or name of the person you are
calling will appear in the display.
Receiving a Private MOTOtalk Call
The number or name of the person who is calling
will appear in the display.
To reply, press the PTT button.
Ending Code Calls and Private
MOTOtalk Calls
Code calls and private MOTOtalk calls will end
automatically after 6 seconds of inactivity.
The MOTOtalk idle screen will display.
28
MOTOtalkTM
Note: A private MOTOtalk call can be
interrupted during the 6 second idle time
by another code call or private call.
Emergency Calls Using
MOTOtalk
If you are in a network coverage area, you can
make emergency phone calls in MOTOtalk mode.
Dial 911 to be connected to an emergency
response center.
Note: If you are on an active MOTOtalk call, you
must end it before calling 911.
Setup Options
You can set up MOTOtalk options on the MT
Options screen. You can access this screen in both
network and MOTOtalk modes.
To access setup options:
1From the main menu, select MOTOtalk. If
MOTOtalk is not one of your options, select MT
Options.
2Select Setup.
You can set the following MOTOtalk options:
Direct Launch: Launch directly into MOTOtalk
when you select MOTOtalk from the main menu.
State Tone: Have an alert sound notify you that
you have used MOTOtalk for a specified
interval.
Using Direct Launch
To set your phone to launch MOTOtalk when you
select MOTOtalk from the main menu:
1From the Setup screen, scroll to Direct Launch
and press A under Change.
2Select On.
Note: If Direct Launch is set to On, the
MOTOtalk setup options will be
unavailable from the main menu.
However, you can still access setup
options while in MOTOtalk by pressing m
and selecting MT Options.
To turn off Direct Launch:
1From the Setup screen, scroll to Direct Launch
and press A under Change.
2Select Off.
MT Options will now display when you select
MOTOtalk from the main menu.
29
Setup Options
Using State Tone
To set your phone to alert after you have used
MOTOtalk for a specified interval:
1From the Setup screen, scroll to State Tone and
press A under Change.
2Select the interval after which you want the tone
to sound.
For example, if you select 1 hour, you will be
notified every hour that you are in MOTOtalk.
To turn off State Tone:
3From the Setup screen, scroll to State Tone and
press A under Change.
4Select Off.
30
Call Alerts
Sending a call alert lets the recipient know you
want to talk to him or her on a Private call.
When you send a call alert, the recipient’s phone
emits a series of beeps, or vibrates, and displays
your name or Private ID.
The recipient can:
Answer — begin a Private call with the sender
Queue — store the call alert to the call alert
queue, which is a list of call alerts
Clear dismiss and delete the call alert
Sending Call Alerts
1Enter the Private ID you want to send to, as you
would when making a Private call.
2Press A under Alert. Ready to Alert appears
on the display.
3Press the PTT button until Alert Successful
appears on the display.
Note: If the alert is not successful, the person
you are trying to reach is on a call or has
the phone turned off.
Receiving Call Alerts
When you receive a call alert, you must answer,
queue, or clear it. You cannot receive phone calls
or Private calls until you do.
To answer a call alert:
Press the PTT button to make a Private call to
the sender.
To queue a call alert:
Press A under Queue.
To clear a call alert:
Press O. -or-
Press A under Clear. -or-
If the flip is closed, press ..
Note: The recent calls list also stores call alerts
you have received. They appear as
Private calls. Call alerts remain in your
recent calls list until you delete them or
until they reach the end of the list.
Using the Call Alert Queue
When you queue a call alert, it remains in the call
alert queue until you make a Private call to the
sender or delete it.
31
Using the Call Alert Queue
Viewing Call Alerts
1From the main menu, select Call Alert.
2Scroll through the list.
Viewing Date and Time
To view the date and time a call alert was received:
1From the main menu, select Call Alert.
2Select the call alert you want information on.
Responding to Call Alerts in the
Queue
After you queue a call alert, you can respond to it
by making a Private call to the sender or sending a
call alert to the sender.
Making a Private Call to the Sender
1From the main menu, select Call Alert.
2Scroll to the call alert you want to respond to.
3Press the PTT button to begin the call.
This removes the call alert from the queue.
Sending a Call Alert to the Sender
1From the main menu, select Call Alert.
2Scroll to the call alert you want to respond to.
3Press A under Alert. Ready to Alert appears
on the display.
4Press the PTT button until Alert Successful
appears on the display.
Deleting Call Alerts
To delete a call alert from the queue:
1From the call alert queue, scroll to the call alert
you want to delete.
2Press m.
3Select Delete.
4Press O or press A under Yes to confirm.
To delete all call alerts from the queue:
1From the call alert queue, press m.
2From the call alert menu, select Delete All.
3Press O or press A under Yes to confirm.
Sorting Call Alerts
Tip: You must have at least one call alert in the
queue to access this feature.
To sort call alerts by the order they were received:
1From the main menu, select Call Alert.
2Press m.
3Select Sort By.
4Select First on Top or Last on Top.
32
Recent Calls
The recent calls list displays information
associated with calls you have made and received
and call alerts you have received. It also displays
My Info and contact information sent to you from
other phones.
The recent calls list displays up to 20 items.
Calls and Call Alerts
The recent calls list contains the numbers of up to
20 of the most recent calls you have made and
received.
If the number of a recent call is stored in Contacts,
the following information appears:
The name assigned to the number
The picture assigned to the number, if your
phone is set to show pictures on the recent calls
list. See “Choosing Picture View or List View on
page 34. Pictures appear for phone calls only.
The Contacts type icon associated with the
number. If the Contacts entry containing the
number has more than one number or address
stored, <> surrounds the Contacts type icon. For
information on Contacts types, see page 37.
The Private ID Contacts type icon appears when
you receive a Private call or call alert, even if the
number is not stored in Contacts.
Call alerts you have received appear as Private
calls. Like all items in the recent calls list, they
remain listed until you delete them or until they
reach the end of the list.
For phone calls, an additional icon appears giving
information about the call:
When you select a call to view its details, you see
information such as the name associated with the
call, the number, date, time, and duration of the
call.
My Info From Other Phones
Note: This feature may not be offered by your
service provider.
The recent calls list displays My Info from other
phones. See Sending My Info and Contact
Information” on page 97.
XA call you made.
WA call you received.
VA missed call. Missed calls appear on the
recent calls list only if you have Caller ID.
33
Contact Information From Other Phones
This icon j appears with My Info from other
phones on the recent calls list, along with the
Private ID of the person who sent the information.
When you select My Info from other phones to view
its details, you see all the information sent.
If you receive My Info from the same phone more
than once, only the most recently sent version
appears in the recent calls list.
Contact Information From
Other Phones
Note: This feature may not be offered by your
service provider.
The recent calls list displays contact information
sent from other phones. This information comes
from the other phone’s Contacts list or recent calls
list. See Sending My Info and Contact Information”
on page 97.
This icon d appears with contact information on
the recent calls list.
Contact information in the recent calls list displays:
The name contained in the contact information
The Contacts type icon associated with the
number or address contained in the contact
information. If the item contains more than one
number or address stored, <> surrounds the
Contacts type icon.
The name or Private ID of the person who sent the
contact information appears as a separate item on
the recent calls list, above the information sent. If
one person sends you more than one item of
contact information, all the items appear below the
person’s name or Private ID.
When you select contact information to view its
details, you see the name or Private ID of the
person who sent the information and all the
information in the item.
If you receive contact information with the same
name from the same phone more than once, only
the most recently sent version appears in the
recent calls list.
Viewing the Recent Calls List
With the Flip Open
1From the main menu, select Recent Calls.
2Scroll through the list.
34
Recent Calls
To view the details of an item on the list:
From the recent calls list, select the item you
want information on.
Tip: To view the details of more items, keep
scrolling.
With the Flip Closed
1Press ..
2If you want to view the rest of the recent calls
list, press the volume controls.
3Press . to dismiss the recent calls list.
Choosing Picture View or List View
You can set your phone to show the picture
associated with each item as you view the recent
calls list or show the list without pictures.
1From the recent calls list, press m.
2Select Recent Calls View.
3Select List View to show the recent calls list
without pictures. -or-
Select Picture View to show the picture
associated with each entry.
Storing Items to Contacts
1From the recent calls list, scroll to or select the
item you want to store.
2Press A under Store. -or-
If Store is not one of your options: Press m.
Select Store or Update Contacts.
Tip: If the item you want to store is a call, Store
does not appear if the number is already
stored in Contacts.
3To store the item as a new entry, select [New
Contact]. -or-
To store the number to an existing entry, select
the entry.
Note: Storing My Info or contact information
from another phone to a Contacts entry
that has a name assigned to it does not
change the name of the Contacts entry.
4If the item you want to store is a call, you must
assign a Contacts type to the number:
With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
5If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries on page 38.
6Press A under Save.
35
Deleting Items
Deleting Items
To delete an item from the recent calls list:
1From the recent calls list, scroll to or select the
item you want to delete.
2Press A under Delete. -or-
If Delete is not one of your options: Press m.
Select Delete.
3Press O or press A under Yes to confirm.
To delete all items on the recent calls list:
1From the recent calls list, press m.
2Select Delete All.
3Press O or press A under Yes to confirm.
Making Calls From the Recent
Calls List
With the Flip Open
1From the main menu, select Recent Calls.
2Scroll to the item containing the number you
want to call.
If you scroll to a call, you can make a call to
the number that made the call. If the number
is stored in Contacts, you can make a call to
any of the numbers stored with it.
If you scroll to My Info from another phone,
you can make a call to the Private ID of the
phone that sent the information.
If you scroll to contact information from
another phone, you can make a call to any of
the numbers in the contact information.
3To place the call now, go to step 4. -or-
Scroll left or right to display the Contacts type for
the number you want to call.
4To make a phone call, press s. -or-
To make a Private call, press the PTT button.
You can also make calls while viewing the details
of an item on the recent calls list:
1From the recent calls list, select the item
containing the number you want to call.
If you select a call or contact information from
another phone, you can make a call to the
number shown first on the details screen.
If you scroll to My Info from another phone,
you can make a call to the Private ID of the
phone that sent the information.
2To make a phone call, press s. -or-
To make a Private call, press the PTT button.
With the Flip Closed
1Press . to display the most recent call.
36
Recent Calls
2Press the volume controls to scroll to the name
or number you want to call.
If you scroll to a call, you can make a call to
the number that made the call.
If you scroll to My Info from another phone,
you can make a call to the Private ID of the
phone that sent the information.
If you scroll to contact information from
another phone, you can make a call to the
number currently displayed.
3To make a phone call, press t on the top of
your phone. -or-
To make a Private call, press the PTT button.
37
Contacts
Contacts stores up to 600 numbers or addresses.
Each Contacts entry can store several numbers or
addresses.
Information stored in Contacts is saved on your
SIM card.
A Contacts entry contains:
A name — A name is required if you are storing
more than one number or address to the entry;
otherwise, it is optional. Typically, this is the
name of the person whose contact information is
stored in the entry.
A ring tone — This is the sound your phone
makes when you receive phone calls or call
alerts from any of the numbers stored in the
entry. You can assign the ring tone from your list
of ring tones. If you do not assign a ring tone, the
entry is created with a default ring tone
assigned.
A picture — This picture appears on the display
when you receive phone calls from any of the
phone numbers stored in the entry. You can
assign the picture from the pictures stored in the
media center. If you do not assign a picture, the
entry is created with no picture assigned.
A Contacts type — Each number or address
stored must be assigned a Contacts type:
AMobile phone number
BPrivate Private ID
CWork1 phone number
DWork2 phone number
EHome phone number
FEmail email address
GFax phone number
HPager phone number
ITalkgroup Talkgroup number
SSDG SDG list number
JIP IP address
KOther phone number
38
Contacts
A number or address — Each Contacts entry
must contain a number or address. This may be
any type of phone number, Private ID, SDG list
number, Talkgroup number, email address, or IP
address.
Note: You can store numbers up to 64 digits
long, but every 20 digits must be
separated by a pause or wait. See
“Creating Pauses and Waits” on page 44.
A Speed Dial number — When you store a
phone number, it is assigned a Speed Dial
number. You can accept the default Speed Dial
number or change it.
A voice name — If you create a voice name for a
number, you can then dial that number by saying
the voice name into your phone. This
iconPappears to the left of the Contacts type
icon if a voice name is assigned.
Accessing Contacts
From the main menu, select Contacts. -or-
If you are on a call: Press m. Select Contacts.
Creating Entries
A number or address and a Contacts type are
required for all Contacts entries. Other information
is optional. You may enter the information in any
order by scrolling through the entry details.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press A under Save to save the entry to
Contacts.
To cancel a Contacts entry at any time, press e to
return to the idle screen.
To create a Contacts entry:
1To access the entry details screen:
Select Contacts > [New Contact]. -or-
From the Contacts list, press m. Select New.
2If you want to assign a name to the entry:
Select Name.
Enter the name. See “Entering Text” on page
70. When you are finished, press O.
Tip: Press A under Browse to select a name
already in Contacts.
3If you want to assign a ring tone or picture to the
entry, select [Ring Tone/Picture]. See
“Assigning a Ring Tone or Picture” on page 39.
39
Creating Entries
4To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
Note: For information about creating SDG lists,
see “Creating SDG Lists in Contacts” on
page 61.
5To store a number or address:
Select the # field (or ID for an email address, or
IP for an IP address).
Enter the number or address. For phone
numbers, use the 10-digit format. For email
addresses, see “Entering Text” on page 70.
Tip: Press A under Browse to select a number
or address from Contacts, the recent calls
list, or Memo.
When you are finished, press O.
6If you want to change the default Speed Dial
number or a create a voice name for the entry,
select [Options]. See “Assigning a Speed Dial
Number or Voice Name” on page 40.
7If you want to add more numbers or addresses
to the entry:
Scroll past the information you already entered.
Enter the additional information for the entry
using step 3 through step 6. You must assign a
name to the entry, if you have not already.
8Press A under Done.
Assigning a Ring Tone or Picture
1If you have not already, select [Ring
Tone/Picture].
2If you want to assign a ring tone from the list of
ring tones:
With Ringer highlighted, scroll left or right to
choose a ring tone. -or-
Select Ringer. Select the ring tone you want to
assign.
3If you want to assign a picture from the media
center:
Scroll to Picture. Scroll left or right to choose a
picture. -or-
Select Picture. Select the picture you want to
assign.
Only pictures that can be assigned to Contacts
entries are displayed. Some large pictures
cannot be assigned.
Tip: If an entry has a picture assigned and you
want the entry to have no picture, select
[No Picture] or press A under Unassign.
40
Contacts
4When you are finished, press A under Back.
Assigning a Speed Dial Number or
Voice Name
1If you have not already, select [Options].
2The default Speed Dial number assigned to a
phone number is displayed in the Speed # field.
This is always the next available Speed Dial
location.
If you want to assign the phone number to a
different Speed Dial location:
With the Speed # field highlighted, press O.
Press A under Delete to delete the current
Speed Dial number.
Enter the new Speed Dial number using the
keypad.
When you are finished, press O.
3If you want to create a voice name for a phone
number, select Voice Name.
As directed by the screen prompts, say and
repeat the name you want to assign to the
number. Speak clearly into the microphone.
4When you are finished, press A under Back.
Storing Numbers Faster
To store numbers to Contacts from the recent calls
list, see “Storing Items to Contacts” on page 34.
To store numbers to Contacts from Memo, see
“Memo” on page 66.
To store numbers to Contacts from the idle screen:
1Use the keypad to enter the number you want to
store.
2Press m.
3Select Store Number.
4To store the number as a new entry, select [New
Contact]. -or-
To store the number to an existing entry, select
the entry.
5With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
6If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries on page 38.
7Press A under Done.
Editing Entries
1From the Contacts list, scroll to or select the
entry you want to edit.
41
Viewing Entries
2Press A under Edit. -or-
If Edit is not one of your options: Press m.
Select Edit.
The entry details screen displays.
3Follow the applicable instructions in “Creating
Entries” on page 38 to edit the various fields.
Viewing Entries
When you view Contacts entries, you can choose
how much detail you want to see.
Viewing the Contacts List
In this view, each entry shows:
The name assigned to the entry
A small version of the picture assigned to the
entry, if you have set Contacts to show pictures
in the Contacts list. See “Choosing Picture View
or List View” on page 42.
The types of numbers and addresses stored in
the entry
To view entries from the Contacts list:
1Access Contacts.
2Scroll to view entries.
Tip: To find Contacts entries faster, use the
keypad to enter the first letter of the name.
3If an entry has more than one number or
address stored, <> surrounds the Contacts type
icon. Scroll left or right to view the icon for each
number stored in the entry.
Selecting an Entry
In this view, each entry shows:
The name assigned to the entry
A small version of the picture assigned to the
entry
The name of the ring tone assigned to the entry
The numbers and addresses stored in the entry
To select an entry:
1From the Contacts list, select the entry you want
to view.
2Scroll to view the numbers and addresses
stored in the entry.
Tip: To select other entries: Scroll left or right.
Or, press # or *.
To return to the Contacts list, press A under Back.
42
Contacts
Viewing More Details
When an entry is selected, you can view more
details about the entry by selecting items within the
entry.
Viewing Details of a Number or Address
1Select the entry.
2Select the number or address you want to view
details of.
If you select a phone number, you can view its
Speed Dial number and see whether it has a
voice name.
To return to the entry, press A under Back or
press O.
Viewing a Large Picture
To view a large version of the picture assigned to
an entry:
1Select the entry.
2Select the first item shown on the entry screen.
This item shows the name assigned to the entry
or No Name.
Note: You cannot make calls from this view.
To return to the entry, press A under Back or
press O.
Choosing Picture View or List View
You can set Contacts to show the picture assigned
to each entry as you view the Contacts list or show
the Contacts list without pictures.
1From the Contacts list, press m.
2Select Contacts View.
3Select List View to show the Contacts list
without pictures. -or-
Select Picture View to show the picture
assigned to each entry.
Searching for a Name
To search for a name in Contacts:
1From the Contacts list, press A under Search.
-or-
If Search is not one of your options: Press m.
Select Search.
2Enter the name you want to see. See “Entering
Text” on page 70.
3Press O.
Your phone finds the name you entered or the
nearest match.
43
Deleting Entries
Showing Only Private IDs, SDG Lists,
and Talkgroups
To set Contacts to show only entries that contain
Private IDs, SDG lists, and Talkgroup entries:
1From the Contacts list, press m.
2Select Filter.
3Set this option to Show Prvt/Grp.
To set Contacts to show all entries:
1From the Contacts list, press m.
2Select Filter.
3Set this option to Show All.
Deleting Entries
Delete an Entry
1From the Contacts list, scroll to or select the
entry you want to delete.
2Press m.
3To delete the entire entry, select Delete Contact
or Delete SDG List.
4Press O or press A under Yes to confirm.
Delete a Number or Address
1From the Contacts list, scroll to the entry that
contains the number or address you want to
delete.
2Scroll left or right to display the Contacts type for
the number you want to delete. -or-
Select the entry. Scroll to or select the number
you want to delete.
3Press m.
4Select Delete Number.
5Press O or press A under Yes to confirm.
Note: If an entry contains only one number or
address, deleting the number or address
deletes the entry.
Checking Capacity
To see how many numbers are stored in Contacts:
1From the Contacts list, press m.
2Select Capacity.
44
Contacts
Creating Pauses and Waits
When storing a number, you can program your
phone to pause or wait between digits while
dialing. A pause makes your phone pause for 3
seconds before dialing further. A wait makes your
phone wait for your response before dialing further.
This feature is useful when using voice mail or
other automated phone systems that require you to
dial a phone number and then enter an access
number.
To program a pause:
Press and hold * until the letter P appears. The
P represents a 3-second pause.
If you store 17035551235P1234, when you select
this number and make a call, your phone dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
If you want a pause longer than 3 seconds, press
and hold * more than once. Each P represents a
3-second pause.
To program a wait:
Press and hold * until the letter W appears. The
W means your phone waits before dialing
further.
If you store 17035551235W1234, when you select
this number and make a call, your phone dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits.
Press A under Yes to dial the last 4 digits.
Tip: You can create pauses and waits while
dialing a number from the keypad. See
“Creating Pauses and Waits While Dialing”
on page 52.
International Numbers
Note: This feature may not be offered by your
service provider.
When storing a number that you plan to use for
international calls, use Plus Dialing:
1Press and hold 0 for two seconds. A “0
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2Enter the country code, city code or area code,
and phone number.
For information about making international calls,
see “Making International Calls” on page 52.
45
Making Calls From Contacts
Making Calls From Contacts
While Viewing the Contacts List
1Access Contacts.
2Scroll to the name or number you want to call.
Tip: To find Contacts entries faster, use the
keypad to enter the first letter of the name.
3To place the call now, go to step 4. -or-
Scroll left or right to display the Contacts type for
the number you want to call.
4To make a phone call, press s. -or-
To make a Private call, press the PTT button.
If you are making a Private call, your phone places
the call to the Private ID stored in the Contacts
entry, even if the Private icon is not displayed.
If you are making a phone call:
Your phone places the call to the phone number
assigned to the Contacts type displayed.
If the Contacts type displayed is not a phone
number, your phone places the call to the phone
number stored in the Contacts entry.
If the Contacts type displayed is not a phone
number and you have more than one phone
number stored in the Contacts entry, your phone
prompts you to select the phone number you
want to place the call to.
After Selecting an Entry
1Access Contacts.
2Select the Contacts entry that contains the
number you want to call.
3Scroll to or select number you want to call.
4To make a phone call, press s. -or-
To make a Private call, press the PTT button.
If you try to make a type of call that does not match
the Contacts type of the number you chose, no call
is placed.
Accessing Contacts with GSM
Phones
If you plan to use the information stored in
Contacts with an i2000, i2000plus, or any other
GSM phone, download iDEN Phonebook Manager.
Go to idenphones.motorola.com/iden/support for
more information.
46
Contacts
You can use iDEN Phonebook Manager to make
the Contacts information saved to your i850
phone’s SIM card accessible in this type of phone.
47
Call Forwarding
Call forwarding sends calls to the phone numbers
you specify. You can forward all calls to one
number or forward missed calls to different
numbers depending on the reason you missed the
call.
You can forward phone lines 1 and 2
independently.
Forwarding All Calls
When you set your phone to forward all calls, an
icon appears in the top row of the display:
To forward all calls:
1From the main menu, select Call Forward >
Forward > All Calls.
2Select To.
If you specified a forwarding number for all calls
before, this number displays.
To forward calls to this number, press A under
Back.
To delete this number, press O, then press and
hold A under Delete.
3To enter the number you want to forward calls to:
Enter the number using your keypad. -or-
Press A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
4Press O.
All your calls are now forwarded to the number you
specified.
GPhone line 1 is active; calls to phone line 1
are being forwarded.
IPhone line 1 is active; calls to phone line 2
are being forwarded.
HPhone line 1 is active; calls to phone lines 1
and 2 are being forwarded.
JPhone line 2 is active; calls to phone line 1
are being forwarded.
LPhone line 2 is active; calls to phone line 2
are being forwarded.
KPhone line 2 is active; calls to phone lines 1
and 2 are being forwarded.
48
Call Forwarding
Turning Off Call Forwarding
If you do not want all your calls forwarded, turn the
feature off:
1From the main menu, select Call Forward > To.
2Set this option to Off.
All your calls are now sent to your phone.
Calls you miss are forwarded according to the
options set for missed calls. By default, missed
calls are forwarded to voice mail.
Note: To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
Forwarding Missed Calls
You can specify a forwarding number for each type
of missed call:
•If Busy — Your phone is on a call or transferring
data.
If No Answer — You do not answer on the first
4 rings.
If Unreachable — Your phone is out of
coverage or powered off.
Note: If you want a type of missed call sent to
voice mail, the call forwarding number for
that type of missed call must be your
voice mail access number.
To forward missed calls:
1From the main menu, select Call Forward >
Forward > Detailed.
2Select If Busy to specify a forwarding number
for calls received when your phone is busy.
3If you specified a forwarding number for this type
of call before, this number displays.
To forward calls to this number, press A under
Back and go to step 6. -or-
To delete this number, press O, then press and
hold A under Delete.
4To enter the number you want to forward this
type of call to:
Enter the number using your keypad. -or-
Press A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
5Press O.
6Repeat step 2 through step 5 for If No Answer
and If Unreachable.
7When you are finished, press A under Back.
49
Viewing Call Forwarding Settings
Viewing Call Forwarding
Settings
1From the main menu, select Call Forward >
Forward > All Calls.
2With To highlighted, press A under Status.
50
Advanced Calling
Features
Call Waiting
Call Waiting lets you receive a second call while on
an active call. Call Waiting is always available,
unless you turn it off for a specific call.
If you are on a call and receive a second call, your
phone emits a tone and displays a message saying
you are receiving a second call.
To accept the second call and put the active call on
hold:
Press A under Yes.
To accept the second call and end the active call:
1Press e.
Your phone rings with the second call.
2Answer the second call.
To decline the second call:
Press A under No. If you subscribe to voice
mail, the call is forwarded to your voice mail box,
unless you set Call Forward for If Busy to a
different number.
Turn Off Call Waiting
To turn off Call Waiting during a call:
1Press m.
2Select In Call Setup > Call Waiting.
3Set this option to Off.
Tip: To turn Call Waiting back on while still on
the call, set this option to On.
To turn off Call Waiting for the next call you make
or receive:
1From the main menu, select Settings > Phone
Calls > Call Waiting.
2Set this option to Off.
Call Waiting is turned back on when you end the
call.
Switching Between Calls
Any time you have one call active and one call on
hold, to make the call on hold active and put the
active call on hold:
Press A under Switch. -or-
If Switch is not one of your options: Press m.
Select Switch.
51
Putting a Call on Hold
Putting a Call on Hold
1While on an active call, press m.
2Select Hold.
If you want to make the call active again, press A
under Resume.
Calling 2 People
Putting a Call on Hold, Making a
Second Call
1Place or receive a phone call.
2While the call is active, press m.
3Select 2nd Call. This puts the call on hold.
4Enter the second phone number you want to
call.
Tip: For quick ways to enter the number, press
m.
5Press s to place the call.
To end the second call and make the call on hold
active again:
Press e.
To make the call on hold active and put the active
call on hold:
Press A under Switch.
Merging 2 Calls into a 3-Way Call
After you put a call on hold and place a second
call, you can combine these calls into a 3-way call:
1Press m.
2Select Join.
All 3 people in the call can speak to and hear each
other.
Making a 3-Way Call
1Place or receive a phone call.
2While the call is active, press m.
3Select 3 Way. This puts the call on hold.
4Enter the second phone number you want to
call.
Tip: For quick ways to enter the number, press
m.
5Press s to place the call.
6Press A under Join.
All 3 people in the call can speak to and hear each
other.
52
Advanced Calling Features
Creating Pauses and Waits
While Dialing
You can enter a pause or wait while dialing a
number. For information on using pauses and
waits, see “Creating Pauses and Waits” on page
44.
To create a pause while dialing a phone number:
1From the keypad, enter the digits you want to
occur before the pause.
2Press m.
3Select Insert Pause.
4Enter the digits you want to occur after the
pause.
To create a wait while dialing a phone number:
1From the keypad, enter the digits you want to
occur before the wait.
2Press m.
3Select Insert Wait.
4Enter the digits you want to occur after the wait.
Making International Calls
Note: This feature may not be offered by your
service provider.
Plus Dialing lets you place an international call to
most countries without entering the local
international access code.
1Press and hold 0 for two seconds. A “0
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2Enter the country code, city code or area code,
and phone number.
One Touch PTT
One Touch PTT sets your phone to call the most
recent Private ID or SDG list* on the recent calls
list, or a Private ID you choose, every time you
press the PTT button.
* Selective Dynamic Group Calling (SDGC) may not be offered by
your service provider.
53
Quick PTT
Setting One Touch PTT
To the Most Recent Private ID or SDG List*
1From the main menu, select Settings > 2-Way
Radio > One Touch PTT.
2Set this option to Last Call.
* Selective Dynamic Group Calling (SDGC) may not be offered by
your service provider.
To Any Private ID
1From the main menu, select Settings > 2-Way
Radio > One Touch PTT > Assigned Number.
2To enter the Private ID you want your phone to
call every time you press the PTT button:
Enter the number using your keypad. -or-
Press A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
Tip: If you are entering a Talkgroup number,
enter # before the number.
3Press O.
Turning Off One Touch PTT
1From the main menu, select Settings > 2-Way
Radio > One Touch PTT.
2Set this option to Off.
Quick PTT
Note: This feature may not be offered by your
service provider.
Quick PTT lets you quickly access any Private IDs
on your phone so that you can make a Private call,
or create a SDG list* and make a SDG call. For
more information about SDG lists, see “Selective
Dynamic Group (SDG) Calls” on page 61.
* Selective Dynamic Group Calling (SDGC) may not be offered by
your service provider.
To view a list of Contacts and SDG lists with
Private IDs in Contacts:
1From the idle screen, press m.
2Select Quick PTT.
To move between Contacts, the recent calls list,
and Memo:
Scroll left or right. -or-
Press * or #.
To make a Private call or SDG call:
1Select the entries you want.
2Press A under Done.
3Press the PTT button.
54
Advanced Calling Features
To save your selections as a SDG list:
1Press m.
2Select Save SDG.
3If you want to assign a name to the SDG list,
enter the name.
Note: If you do not assign a name, the SDG list
is named “SDG” followed by the number
of members in the SDG list. For example,
“SDG (8)” for a SDG list with 8 members.
4Press O.
Setting Flip Actions
For Answering Calls
To set your phone to answer calls when you open
the flip:
1From the main menu, select Settings > Phone
Calls > Flip Activation > Flip to Ans.
2Set this option to On.
To set your phone not to answer calls when you
open the flip:
Set Flip to Ans to Off in step 2.
For Ending Calls
To set your phone to end calls when you close the
flip:
1From the main menu, select Settings > Phone
Calls > Flip Activation > Flip to End.
2Set this option to On.
To set your phone not to end calls when you close
the flip:
Set Flip to End to Off in step 2.
Note: If you are using your phone with a
headset, and you have the Flip to End
option set to On, closing your flip sends
incoming sound to the headset and does
not end the call.
Call Timers
Call timers measure the duration of your phone
calls, Private or group calls, and circuit data use,
as well as the number of Kilobytes sent and
received by your phone:
•Last Call — displays the duration of your most
recent phone call.
Phone Reset keeps a running total of your
phone call minutes, until you reset it.
55
Using Your Phone as a Modem
Phone Lifetime — displays the total minutes of
all your phone calls.
•Prvt/Grp Reset — keeps a running total of all of
your Private and group call minutes, until you
reset it.
Prvt/Grp Lifetime displays the total minutes
of all your Private and group calls.
Circuit Resetkeeps a running total of all of
your circuit data use, until you reset it.
Circuit Lifetime — displays the total minutes of
all of your circuit data use.
•Kbytes Reset keeps a running total of the
number of Kilobytes sent and received by your
phone, until you reset it.
To view or reset a timer:
1From the main menu, select Call Timers.
2Select the feature you want to view or reset.
3To view a feature without resetting: Press O
when you are finished viewing. -or-
To reset a feature: Press A under Reset. Press
O or press A under Yes to confirm.
Note: The values displayed by Call Timers
should not be used for billing. Call timers
are estimates only.
Using Your Phone as a Modem
Note: This feature may not be offered by your
service provider.
To use your phone as a modem with a laptop,
handheld device, or desktop computer:
1Open the connector cover.
connector
cover
56
Advanced Calling Features
2With the phone’s display facing up, insert a data
cable’s connector into the accessory connector,
until you hear a click.
3Insert the data plug into the data port of the other
device.
When used as a modem, your phone has these
data transfer modes:
Circuit data — used for sending and receiving
faxes and for transferring large files
Packet data — used for small file transfers such
as email
To use these services, you must install the iDEN
Wireless Data Services software (available
separately). For more information on setting up
your computer and your i850 phone for packet and
circuit data calls, refer to the Wireless Data
Services User’s Guide or contact your service
provider.
Making TTY Calls
Note: This feature may not be offered by your
service provider.
To use your phone to make phone calls using a
teletypewriter (TTY) device:
1Connect one end of a 2.5mm cable into the
audio jack on your phone. Connect the other
end of the cable to your TTY device.
2Make sure that your phone’s TTY feature is on
and select the TTY mode you want to use.
3Use your phone to enter phone numbers and
make calls.
When you make a TTY call, these icons appear on
the phone’s display:
NPhone call is active.
OPhone call is on hold.
57
Making TTY Calls
TTY device features such as Turbo-Code,
High-Speed, and Interruption are not supported by
your phone. These features must be turned off or
disabled to use your TTY device with your phone.
Turning On the TTY Feature
Your phone’s TTY feature must be on if you want
to make TTY calls, set the TTY mode, or change
the TTY baud rate. To make sure the TTY feature
is on:
From the main menu, select Settings > Phone
Calls > TTY > Use TTY. This field must say On.
Choosing a Mode
Your phone supports these TTY modes:
• TTY — You type and read text on your TTY
device.
•VCO (Voice-Carry-Over) — You speak into your
phone and read text replies on your TTY device.
• HCO (Hearing-Carry-Over) — You type text on
your TTY device and listen to voice replies on
your phone speaker.
To change mode while not in a call:
1From the main menu, select Settings > Phone
Calls > TTY > Type.
2Select the TTY mode you want.
When you make a TTY call, the call begins in the
TTY mode you last selected.
To change mode during a call using your phone:
1Press m.
2Select In Call Setup > TTY > Type.
3Select the mode you want.
To change mode during a call using your TTY
device, issue one of the following commands:
“VCO please” — to select VCO mode
“HCO please” — to select HCO mode
“HCO off please” — to turn off HCO mode
Important: When you are using HCO, the sound
coming from your phone speaker may
be uncomfortably loud. Use caution
when putting the phone to your ear.
(For information on setting the volume
of your phone speaker, see “Setting the
Volume” on page 128.)
Changing the TTY Baud Rate
By default, your phone’s TTY baud rate is set to
45.45, the baud rate required for TTY calls within
the U.S. To make calls outside the U.S., set your
TTY baud rate to 50.00.
58
Advanced Calling Features
To change the TTY baud rate:
1From the main menu, select Settings > Phone
Calls > TTY > Baud.
2Select the baud rate for your location.
59
Group Calls
Group Calls and
Selective Dynamic
Group Calls
Note: Selective Dynamic Group Calling (SDGC)
may not be offered by your service
provider.
Your phone gives you 2 ways to call more than one
Private ID at once:
Group calls — calls to a Talkgroup
Selective Dynamic Group calls — calls to a SDG
list
Note: In order to store SDG lists to your i850,
you must use a SDG-capable SIM card.
For more information about SDG-capable
SIM cards, contact your service provider.
SDG lists created with your i850 phone
are not readable by an older iDEN
SIM-based phone.
Group Calls
A group call is similar to a Private call, but is made
to all members of a Talkgroup at once. A Talkgroup
is a predetermined group of your service provider’s
customers.
Before you can make or receive group calls, a
Talkgroup must be established. After the Talkgroup
is established, you must join the Talkgroup.
Group Calls SDG Calls
Set-up Predefined, via
your service
provider
administrator
using Group
Management
Dynamically,
via your phone
Group Names Talkgroups ISDG lists S
Voice
Activated
Dialing
No Yes
60
Group Calls and Selective Dynamic Group Calls
Joining a Talkgroup
Your sales representative or your service provider
establishes Talkgroups for you and assigns each
Talkgroup a Talkgroup number. You can choose a
name for each of your Talkgroups when you create
entries for them in Contacts.
To receive group calls made to any of these
Talkgroups, you must join the Talkgroup.
1From the main menu, select Contacts.
2Scroll to the Talkgroup you want to join.
3Press A under Join.
Note: You can only monitor one Talkgroup at a
time.
Making Group Calls
1Press #. Then enter the Talkgroup number
using the keypad. -or-
Choose the Talkgroup name from Contacts or
recent calls list.
2Proceed as if making a Private call.
Receiving Group Calls
To answer a group call:
Proceed as if answering a Private call. Only one
person at a time may speak on a group call.
The Private ID or name of the person who is
speaking will appear on the display below the
Talkgroup number.
Turning off Group Calls
To set your phone to prevent you from hearing
group calls to your Talkgroup:
1From the main menu, select Settings > 2-Way
Radio > Tkgrp Silent.
2Set this option On.
To set your phone to let you hear group calls to
your Talkgroup:
Set Tkgrp Silent to Off in step 2.
61
Selective Dynamic Group (SDG) Calls
Selective Dynamic Group
(SDG) Calls
Note: This feature may not be offered by your
service provider.
A SDG call is similar to a Private call, but is made
to all members of a SDG list at once. A SDG list is
a group of Private IDs that you create using your
phone. A SDG list must contain at least 2 members
and can contain up to 20 members.
You can create a SDG list for one call only or store
it to Contacts so you can call it any time.
You can use Send via PTT* to send SDG lists to
other phones that have this capability.
* Send via PTT may not be offered by your service provider.
Creating SDG Lists in Contacts
1From the main menu, select Contacts.
2Select [New SDG List].
Note: You can also create a SDG list by
selecting [New Contact] and assigning
the SDG contact type.
3If you want to assign a name to the SDG list,
enter the name.
Note: If you do not assign a name, the SDG list
is named “SDG” followed by the number
of members in the SDG list. For example,
“SDG (8)” for a SDG list with 8 members.
4Add Private IDs. See “Adding Private Numbers”.
5If you want to create a voice name for the SDG
list, select [Options] > Voice Name. As directed
by the screen prompts, say and repeat the voice
name you want to assign to the SDG list. Speak
clearly into the microphone.
6Press A under Save.
Adding Private Numbers
You can add Private IDs to a SDG list by selecting
them from Contacts, the recent calls list, or memo.
You can add all members in an existing SDG list by
selecting the list.
You can select more than one member from
Contacts and the recent calls list. A checkmark
appears next to each selected item.
Tip: To deselect an item: Scroll to a selected
item and press O.
You can also enter Private IDs from the keypad.
62
Group Calls and Selective Dynamic Group Calls
To add members from Contacts, the recent calls
list, or Memo:
1While creating a SDG list, select [Add Member].
-or-
2Select [Add Number] and press A under
Browse.
Note: To move between Contacts, the recent
calls list, and Memo, scroll left or right, or
press * or #.
3Scroll to the members you want from Contacts,
the recent calls list, or Memo and press O. A
checkmark appears next to each selected
member.
Note: To deselect a member, scroll to a selected
member and press O.
4Press A under Done.
To add members manually from the keypad:
1While creating a SDG list, select [Add Number].
2Enter the Private number using the keypad.
3Press O.
Removing Members or SDG Lists
To remove a member from a SDG list:
1From Contacts, scroll to the SDG list you want to
delete the member from.
2Press A under Edit.
3Scroll to the member you want to remove.
4Press m.
5Select Remove Member.
6Select Save.
To remove all members from a SDG list:
1From Contacts, scroll to the SDG list you want to
delete the member from.
2Press A under Edit.
3Press m.
4Select Remove All Members.
5Press A under Yes.
To delete a SDG list from Contacts:
1Scroll to the SDG list you want to delete.
2Press m.
3Select Delete SDG List.
Storing SDG Lists Faster
From the Recent Calls List
1From the recent calls list, select the SDG list you
want.
2Press A under Store.
3If you want, add more information to the entry.
4Press A under Save.
63
Selective Dynamic Group (SDG) Calls
From an Active SDG Call
1During an active SDG call, press m.
2Select Store SDG.
3If you want, add more information to the entry.
Note: You cannot record a voice name during an
active call.
4Press A under Save.
Making SDG Calls
With the Flip Open
1From Contacts or the recent calls list, scroll to or
select the SDG list you want. -or-
Press and hold t until a prompt appears telling
you to say the voice name. Say the voice name
assigned to the SDG list you want.-or-
From the idle screen, press the number on your
keypad assigned to the SDG list you want. -or-
Enter or select a Private ID and add more
Private IDs. See “Starting a SDG Call with a
Private ID”.
2Press the PTT button.
With the Flip Closed
To make a SDG call from the recent calls list with
the flip closed:
1Press .. Press the volume controls to scroll to
the SDG list you want. -or-
Press and hold t until a prompt appears
telling you to say the voice name. Say the voice
name assigned to the SDG list you want.
2Press the PTT button.
Starting a SDG Call with a Private ID
You can start a SDG call with any Private ID you
want to call.
1Choose the first Private ID that you want in the
SDG call:
From the idle screen, enter the Private ID. -or-
From the Contacts list, scroll to an entry
containing the Private ID. -or-
From recent calls list, scroll to an entry
containing the Private ID.
2Press m.
3Select Call SDG.
4Add more Private IDs. See “Adding Private
Numbers” on page 61.
64
Group Calls and Selective Dynamic Group Calls
5If you want to save the SDG list you have
created: Press m. Select Store SDG.
6To make the call, press the PTT button. -or-
Press A under Done.
7Press the PTT button.
Receiving SDG Calls
To answer a SDG call:
Proceed as if answering a Private call. Only one
person at a time may speak on a SDG call.
SDG Call Information
While you are in a SDG call, the following appears
on the screen:
The name of the SDG list
The name or the Private ID of the person
speaking
The number of participants in the SDG call
SDG Call Details
During a SDG call, you can view details about the
other SDG list members, such as their name or
Private ID, and their status on the call.
To view SDG call details, press A under Details.
In the SDG Call Details view, these icons appear
next to member names or Private IDs:
Sending SDG Lists Using Send via
PTT
Note: Send via PTT may not be offered by your
service provider.
You can send a SDG list using Send via PTT so
that the person who receives the SDG list can use
the list.
1From Contacts or the recent calls list, scroll to or
select the SDG list you want. -or-
From the idle screen, press the number on your
keypad assigned to the list you want.
2Press m.
TThe member of the SDG list who is speaking.
AA member of the SDG list who is active on the
SDG call, but not speaking.
OA member of the SDG list who has exited the
call.
UA member of the SDG list who could not be
reached on the SDG call.
uA member of the SDG list whose status is
unknown.
65
Selective Dynamic Group (SDG) Calls
3Select Send SDG via PTT.
4To include yourself in the list, press A under
Yes. -or-
To exclude yourself from the list, press A under
No.
Note: If you choose to include yourself and the
list already contains 20 members, you will
be prompted that the list is full. You will be
excluded from the list.
5Enter the Private ID of the person you want to
send the SDG list to. -or-
Select Browse to select a contact from
Contacts, the recent calls list, or Memo.
6Press O.
7To send the SDG list, push the PTT button.
The SDG list will display in the recent calls list
on the phone that you send the SDG list to.
66
Memo
Memo lets you store a number, make a call to that
number, and save it to Contacts.
To create a memo:
1From the main menu, select Memo.
2Enter the number using your keypad.
3Press O.
To view the memo later:
From the main menu, select Memo.
To delete the memo:
1From the main menu, select Memo.
2Press and hold A under Delete.
3Press O.
To edit the memo:
1From the main menu, select Memo.
2Enter the new number.
3Press O.
To make a call to the memo number:
1From the main menu, select Memo.
2To make a phone call, press s. -or-
To make a Private call, press the PTT button.
To store the memo number to Contacts:
1From the main menu, select Memo.
2Press m.
3Select Store to Contacts.
4To store the number as a new entry, select [New
Contact]. -or-
To store the number to an existing entry, select
the entry.
5With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
6Press A under Save.
67
Ring Tones
To set the ring tone your phone makes when you
receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT, or
Datebook reminders:
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Scroll through the list of ring tones and select the
one you want to assign. Vibrate sets your phone
to vibrate instead of making a sound; Silent sets
your phone to neither vibrate nor make a sound.
Tip: Highlighting a ring tone lets you hear it.
4Select the features you want to assign the ring
tone to.
5When you are finished, press A under Done.
Note: This icon M appears on the display if you
set your phone to neither vibrate nor make
a sound for phone calls.
Setting Your Phone to Vibrate
You can set your phone to vibrate instead of
making a sound when you receive all phone calls,
Private calls, group calls, SDG calls*, call alerts,
messages notifications, pictures sent using Send
via PTT, and Datebook reminders.
* Selective Dynamic Group Calling (SDGC) may not be offered by
your service provider.
1From the main menu, select Ring Tones >
VibeAll.
2Set this option to On.
Tip: Pressing the volume controls to turn down
the volume as far as possible sets VibeAll
to On.
To set your phone to vibrate instead of making a
sound for some features but not others:
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Select Vibrate from the list of ring tones.
4Select the features you want to set to make no
sound.
5When you are finished, press A under Done.
Note: To set ring options for Private calls, group
calls, and SDG calls*, see “Setting Your
Phone to Vibrateon page 128.
68
Ring Tones
These icons indicate how the ringer is set.
* Selective Dynamic Group Calling (SDGC) may not be offered by
your service provider.
These icons may appear at the same time.
Ring and Vibrate
To set your phone to ring and vibrate when you
receive phone calls or call alerts:
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Scroll through the list of ring tones and highlight
the one you want to assign.
4Press m.
5Select Assign w/Vibe.
6Select the features you want to set to ring and
vibrate.
7When you are finished, press A under Done.
This icon S appears on the display.
Assigning Ring Tones to
Contacts
You can set the ring tone your phone makes when
you receive phone calls or call alerts from
someone you have stored in Contacts.
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Scroll through the list of ring tones and select the
one you want to assign.
4Select A Contact.
5Select the Contacts entry you want to assign the
ring tone to.
Viewing Ring Tone
Assignments
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Highlight any ring tone.
4Press m.
5Select Overview.
6Scroll to view ring tones assigned to features
and Contact entries.
QThe phone always vibrates instead of making
a sound.
RThe phone vibrates instead of making a
sound for phone calls.
uPrivate calls, group calls, and SDG calls* are
heard through the earpiece, not the speaker.
69
Downloading More Ring Tones
Downloading More Ring
Tones
If you want to use other ring tones, you can
download them into your phone for a fee. For more
information about custom ring tones and
downloading instructions, please contact your
service provider.
About DRM Ring Tones
Your phone supports gifting and Tell-A-Friend
services for DRM ring tones. However, these
services may not be offered by your service
provider. Please contact your service provider for
more information about these services.
For more information about DRM items, see
“Digital Rights Management” on page 91.
Managing Memory
To view the amount of memory available for
custom ring tones:
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Highlight any ring tone.
4Press m.
5Select Memory Usage.
Deleting custom ring tones frees memory.
Note: Ring tones are stored in your phone using
the same memory space used to store
messages, voice records, Java
application data, pictures, and wallpaper
images. Deleting some of these other
items frees memory for ring tones.
Deleting Custom Ring Tones
Deleting a ring tone from the list of ring tones
deletes it from all parts of your phone, including the
media center and Contacts.
Except for DRM ring tones, if you delete a ring tone
that you purchased from your phone, you will have
to purchase it again. Under certain conditions,
some DRM vendors will not charge you if you
download an item multiple times within a given time
frame. Please contact the DRM vendor to learn
more about their download regulations.
To delete a custom ring tone:
1From the main menu, select Ring Tones.
2Make sure VibeAll is set to Off.
3Scroll to the ring tone you want to delete.
4Press m.
5Select Delete.
6Press A under Yes to confirm.
70
Entering Text
You can enter text, numbers, and symbols into
your phone using Alpha, Word, Numeric, or
Symbol text input modes.
When you access a screen that requires you to
enter text, you start in the mode last used.
To choose a text input mode:
1At a screen that requires you to enter text, press
m.
2Select the text input mode you want to use. A
checkmark appears next to the current mode.
Using Word Mode
In Word mode, T9 Text Input analyzes the letters
on the keypad button you press and arranges them
to create words. As you type, T9 Text Input
matches your keystrokes to words in its database
and displays the most commonly used matching
word. You can add you own words to this
database.
Entering a Word
1Select Word as your text input mode.
2Type a word by pressing one key for each letter.
For example, to type “test press 8 3 7 8.
The displayed word may change as you type it.
Do not try to correct the word as you go. Type to
the end of the word before editing.
3If the word that appears is not the desired word,
press 0 to change the word on the display to
the next most likely word in the database.
Repeat until the desired word appears.
If the desired word does not appear, you can add it
to the database.
l AlphaPress a key several times for each
character.
jWord — Press a key once for each letter
while words likely to be the one you want are
chosen from a database.
iSymbolsEnter punctuation and other
symbols.
kNumeric — Enter numbers.
71
Special Function Keys
Adding Words to the Database
1Select Alpha as your text input mode.
2Type the word using Alpha mode.
3Select Word as your text input mode.
4Press #.
The word you typed in Alpha text entry mode is
now in the database.
Note: You cannot store alphanumeric
combinations, such as Y2K.
Choosing a Language
To change the language of the database:
1At a screen that requires you to enter text, press
m.
2Select Languages.
3Select the language you want for your database.
Special Function Keys
Some of the phone’s keys assume different
functions while in Alpha or Word mode.
Spaces
Press # for a space.
Capitalization
When you press and hold the # key, it acts as a
3-way toggle. Press and hold # to make the next
letter typed uppercase (shift), to make all
subsequent letters typed uppercase (caps lock), or
to go back to lowercase letters.
These icons appear in the top row of your display:
When neither of these icons appear, letters typed
are lowercase. Scrolling up after typing a letter
makes that letter uppercase.
Note: When creating a text message, you
cannot capitalize by scrolling up.
Your phone automatically makes the first letter of a
sentence uppercase.
Punctuation
Press 1 or 0 to insert punctuation. Continue to
press the key to view the list of symbols available
through that key. Pause to select the symbol you
want.
m or XShift is on.
n or WCaps lock is on.
72
Entering Text
Note: Additional punctuation symbols are
available in Symbols mode.
73
Messages
You can receive the following types of messages
on your phone:
Voice mail messages
Short Message Service (SMS) text messages
Depending on your service provider, you may
have the option to receive fax mail and Net
alerts.
You have 2 ways to access the messages you
receive:
Respond to the message notification that
appears when the message is received.
Dismiss the message notification and access
the message later through the message center.
You can listen to or view these messages, delete
them, or continue to store them in the message
center.
Message Notifications
When you receive a message, your phone notifies
you with text on the display and a notification tone
or vibration. You can access the message or
dismiss the notification.
If you dismiss the notification, the message is not
deleted. It can be accessed through the message
center.
If you are not on a phone call when you receive a
message, your phone sounds a notification tone
every 30 seconds until you access the message,
you dismiss the notification, or the alert time-out
expires.
Setting Notification Options
To control whether your phone sounds message
notification tones while you are on phone calls:
1From the main menu, select Settings > Phone
Calls > Notifications.
2Select the option you want:
Receive All Tones sound during calls for
all types of messages.
Message Mail Only — Tones sound during
calls for SMS messages; tones for all other
types of messages are held until you end
calls.
Delay All — Tones for all types of messages
are held until you end calls.
Tip: To set notification options during a call:
Press m. Select In Call Setup >
Notifications.
74
Messages
Message Center
The message center manages your messages.
All your messages are stored in the message
center. The message center shows how many
messages you have of each type.
To access your messages through the message
center:
1From the main menu, select Messages.
2Scroll to the type of message you want to
access.
3Press O or press A under the display option on
the left.
75
Voice Mail Messages
Note: To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
Receiving a Message
When you receive a voice mail message, New
Voice Mail Message appears on the display.
To call your service provider’s voice mail system
and listen to the message:
Press A under Call.
To dismiss the message notification:
If the flip is closed, press .. -or-
If the flip is open, press O or press A under
Back, or close the flip.
If the caller leaves a message, this icon y
appears on the display, reminding you that you
have a new message.
Accessing Voice Mail from
the Message Center
From the main menu, select Messages > Voice
Mail.
Sending Unanswered Calls to
Voice Mail
To send a phone call to voice mail instead of
answering it:
If the flip is closed, press .. -or-
Press e. -or-
Press A under No.
76
MOSMS Messages
Note: This feature may not be offered by your
service provider.
If your service provider offers MOSMS, your phone
sends SMS messages using MOSMS and receives
SMS messages from other phones that are using
MOSMS.
Setting Up
Before you begin using MOSMS, you may need to
set up your signature, service center number, and
expiration information:
1From the main menu, select Messages.
2Scroll to Text Inbox.
3Press m.
4Select Text Msg Setup.
5Select Signature.
Enter your signature. It may be up to 11
characters long. When you are finished, press
O.
6Select Srvc Cntr No.
Enter the phone number of your service center.
If you do not know this number, contact your
service provider.
When you are finished, press O.
7Select Expire After.
This is the amount of time messages you send
are saved at the service center if they cannot be
delivered. After this period, they are discarded.
Scroll to select the number of days you want
your messages to be saved.
When you are finished, press O.
8Select Auto Clean Up. Set this option to On if
you want your phone to delete sent messages.
If you set Auto Clean Up to On, select Clean
Up After to set the number of days after which
sent messages are deleted or the number of
messages to be kept.
9Press A under Done to save the information
you entered.
Receiving a Message
To view the message:
Press A under Read.
To dismiss the message notification:
If the flip is closed, press .. -or-
If the flip is open, press A under Back or close
the flip.
77
Reading from the Message Center
If your phone is powered off when you receive a
text message, your phone notifies you the next
time you power it on. If you are out of your
coverage area, your phone alerts you when you
return to your coverage area.
Tip: While reading a text and numeric message
that contains a phone number, you can
press s to call that number.
Reading from the Message
Center
1From the main menu, select Messages > Text
Inbox.
2Select the message you want to read. -or-
Press the number of the message you want to
read.
3If the message fills more than one screen, scroll
to read it.
Tip: Scrolling through one message lets you
view the next message.
4To save the message, press A under Ok. -or-
To reply to the message, press A under Reply.
-or-
To see all other choices, including forwarding
and deleting the message, calling the sender, or
storing the sender’s number in Contacts, press
m.
Creating and Sending
Messages
1From the main menu, select Messages >
[Create Message]. -or-
Select [Create Message] from Text Inbox, Text
Outbox, or Drafts. -or-
Highlight Quick Notes and press A under
Compose.
Tip: This option is available from many
context-sensitive menus in the message
center.
2To address the message:
Use the keypad to enter the phone number of
the person you want to send the message to.
-or-
Press A under Browse. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
When you are finished, press O.
3Enter the text of the message. -or-
78
MOSMS Messages
To use a quick note: Press A under Browse.
Scroll to the quick note you want. For more
information on quick notes, see “Using Quick
Notes”.
When you are finished, press O.
4If you want to send the message, press A under
Send. -or-
To edit the message, press O. -or-
To delete the message without sending it, press
A under Cancel. -or-
If you want to request confirmation of delivery,
save the message as a draft, or set the sending
method, press m. Select the option you want.
Beginning Messages From the Recent
Calls List
1From the recent calls list, scroll to the name you
want to send a message to.
2If the entry has more than one phone number
stored, view the phone number you want to send
the message to.
3Press m.
4Select Compose SMS. The message is
automatically addressed to the phone number
you chose.
5Follow step 3 through step 4 of “Creating and
Sending Messages” on page 77.
Beginning Messages From the Idle
Screen
1Using the keypad, enter the number you want to
send a message to.
2Press m.
3Select Compose SMS. The message is
automatically addressed to the phone number
you chose.
4Follow step 3 through step 4 of “Creating and
Sending Messages” on page 77.
Using Quick Notes
Quick notes are short, pre-written text messages
that you can create, edit, and send. You can store
up to 20 quick notes. A quick note may be up to 30
characters long.
To create a quick note:
1From the main menu, select Messages > Quick
Notes > [New Note].
2Press O or press A under Create. Enter text.
-or-
To choose from pre-installed notes, select the
note you want.
79
Creating and Sending Messages
Tip: For more options, including sending the
quick note, press m.
Using Drafts
When you save a message as a draft, it is saved in
the drafts folder.
To edit a draft:
1From the main menu, select Messages >
Drafts.
2Select the draft you want to edit.
3To edit the fields you want to change, follow
step 2 through step 4 in “Creating and Sending
Messages” on page 77.
Resending Messages
To resend a message:
1From the main menu, select Messages > Text
Outbox.
2Scroll to the message you want to resend. -or-
Press the number of the message you want to
resend.
3Press s. -or-
Press m. Select Resend.
Deleting Sent Messages
To delete a sent message:
1From the main menu, select Messages > Text
Outbox.
2Scroll to the message you want to delete.
3Press A under Delete.
4Press A under Yes to confirm.
To delete all unlocked sent messages:
1From the main menu, select Messages > Text
Outbox.
2Press m.
3Select Delete All.
4Press A under Yes to confirm.
Locking and Unlocking Sent
Messages
When you lock a message, it cannot be deleted
until you unlock it.
Locking a Message
1From the main menu, select Messages > Text
Outbox.
2Scroll to the message you want to lock or
unlock.
3Press m.
80
MOSMS Messages
4Select Lock.
Unlocking a Message
1From the main menu, select Messages > Text
Outbox.
2Scroll to the message you want to lock or
unlock.
3Press A under Unlock.
Sorting Messages
You can sort messages in your inbox by sender,
time and date, and status. You can sort messages
in your outbox by recipient, time and date, and
status.
1From the main menu, select Messages > Text
Inbox or Messages > Text Outbox.
2Highlight any messages.
3Press m.
4Select Sort and Order.
5Select Sort By to specify the sorting method.
6Select Order By to specify the sorting order.
Managing Memory
Your text inbox, outbox, and drafts folder have a
set amount of memory available for storing
messages.
The text inbox holds 20 messages. If the text inbox
is full, you cannot receive messages until you
delete some.
The outbox and drafts folder share memory space.
Together they can hold 30 messages. If the outbox
and drafts folder memory is full, you cannot send
messages or save drafts until you delete some.
To view the amount of memory available in your
text inbox:
1From the main menu, select Messages > Text
Inbox.
2Press A under Memory.
To view the amount of memory available in your
outbox and drafts folder:
1From the main menu, select Messages > Text
Outbox or Messages > Drafts.
2Press A under Memory.

Navigation menu