Motorola Solutions 89FT5868 2 Way Portable Radio User Manual Manual

Motorola Solutions, Inc. 2 Way Portable Radio Manual

Contents

Manual

Download: Motorola Solutions 89FT5868 2 Way Portable Radio User Manual Manual
Mirror Download [FCC.gov]Motorola Solutions 89FT5868 2 Way Portable Radio User Manual Manual
Document ID2590389
Application IDFpvBGO/FNUgwSgiZ/QIKoQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize190.56kB (2382019 bits)
Date Submitted2015-04-20 00:00:00
Date Available2015-04-20 00:00:00
Creation Date2015-03-16 10:53:31
Producing SoftwareAntenna House PDF Output Library 6.1.402 (Windows (x64))
Document Lastmod2015-03-17 10:46:26
Document TitleMTP3250 Feature User Guide - USA and Canadian version
Document CreatorAH XSL Formatter V6.1 R1 for Windows (x64) : 6.1.5.11330 (2013/05/23 13:33JST)
Document Author: Motorola Solutions

Mobile Release 14.0
MTP3250
FEATURE USER GUIDE USA and Canadian version
March 2015
EN
© 2015 Motorola Solutions, Inc. All rights reserved.
*MN001810A01*
MN001810A01-A
Contents
Contents
List of Figures............................................................................................................13
List of Tables............................................................................................................. 15
Copyrights................................................................................................................. 17
Chapter 1: General Information.............................................................................. 19
Icon Conventions......................................................................................................................... 19
Declaration of Conformity............................................................................................................ 19
Important Safety Information....................................................................................................... 20
Informations importantes sur la sécurité......................................................................................21
Using this Guide.......................................................................................................................... 21
Feature and Service Availability.................................................................................................. 21
Chapter 2: Getting Started.......................................................................................23
Product Technical Information..................................................................................................... 23
Before Power On......................................................................................................................... 23
Attaching the Antenna.......................................................................................................24
Inserting the SIM Card...................................................................................................... 24
Installing the Battery......................................................................................................... 25
Removing the Battery....................................................................................................... 25
Charging the Battery......................................................................................................... 26
Charging the Battery By Using a USB Cable....................................................................26
Charging Indicators...........................................................................................................27
Low Battery Indication.......................................................................................................28
Controls and Indicators................................................................................................................28
Display......................................................................................................................................... 30
Configurable Idle Screen.................................................................................................. 31
Status Icons................................................................................................................................. 31
Powering On the Radio................................................................................................................34
Unlocking Your Radio.................................................................................................................. 35
Unblocking Your Radio..................................................................................................... 35
Locking/Unlocking the Keys/Buttons........................................................................................... 35
Holding Your Radio......................................................................................................................35
Entering TMO / DMO Mode......................................................................................................... 36
Transmit Inhibit Mode.................................................................................................................. 36
Selecting Talkgroups................................................................................................................... 37
Talkgroup Icon Selection............................................................................................................. 37
Activating Talkgroup Scanning.................................................................................................... 38
Send Feedback
Contents
Broadcast Call............................................................................................................................. 38
Ambience Listening (AL) Call...................................................................................................... 38
One-Touch Button Feature.......................................................................................................... 38
Terminal Temporary Disable/Enable........................................................................................... 40
Terminal Permanent Disable....................................................................................................... 40
High/Low Audio Toggle................................................................................................................40
Using High Audio.............................................................................................................. 40
Using Low Audio............................................................................................................... 41
During the Call............................................................................................................................. 41
Writing Text..................................................................................................................................41
Selecting Text Entry Modes.............................................................................................. 41
Selecting Text Entry Methods and Languages................................................................. 41
Text Entry Icons................................................................................................................ 42
Keys Usage.......................................................................................................................42
Writing in iTAP Alphanumeric........................................................................................... 44
Writing in TAP Alphanumeric............................................................................................ 45
Word Locking.................................................................................................................... 45
Adding Words to the Dictionary........................................................................................ 45
Home Display Text Message.......................................................................................................46
Chapter 3: Modes..................................................................................................... 47
Using Networks............................................................................................................................47
Trunked Mode Operation.............................................................................................................47
Entering TMO Mode..........................................................................................................47
Selecting Talkgroups........................................................................................................ 48
Making Group Calls in TMO..............................................................................................48
Receiving Group Calls in Idle............................................................................................48
Receiving Group Calls during Ongoing Group Calls.........................................................48
Dynamic Group Number Assignment (DGNA)..................................................................48
DGNA Reception.............................................................................................................. 49
DGNA Auto Select Group................................................................................................. 49
DGNA Auto Reselect Group............................................................................................. 49
Viewing DGNA Talkgroups............................................................................................... 49
Broadcast Calls Initiated by Users.................................................................................... 49
Initializing Broadcast Calls................................................................................................ 49
Phone and PABX Calls..................................................................................................... 50
Private Call........................................................................................................................50
Making Private Calls......................................................................................................... 50
Assistance Call................................................................................................................. 50
Call Modification................................................................................................................50
Send Feedback
Contents
Local Site Trunking...................................................................................................................... 51
Entering Local Site Trunking.............................................................................................51
Exiting Local Site Trunking............................................................................................... 52
Direct Mode Operation.................................................................................................................52
Entering DMO Mode......................................................................................................... 52
Selecting Talkgroups........................................................................................................ 52
Making Group Calls in DMO............................................................................................. 53
Receiving Group Calls in Idle............................................................................................53
Private Call........................................................................................................................53
Making Private Calls......................................................................................................... 53
DMO Private Priority Call.................................................................................................. 54
Talkgroup for Individual Calls............................................................................................54
Communication through Repeaters.................................................................................. 54
Communication through Gateways...................................................................................54
Selecting DMO Group Call Options.................................................................................. 55
Transmit Inhibit Mode.................................................................................................................. 56
Emergency Operations................................................................................................................ 56
Emergency Group Call......................................................................................................57
Making Emergency Group Calls....................................................................................... 57
Receiving Emergency Group Calls................................................................................... 58
Non-Tactical Emergency...................................................................................................58
Emergency Individual Calls (Private or MS-ISDN)............................................................58
Emergency Alarm............................................................................................................. 58
Emergency SDS Status.................................................................................................... 58
Emergency Hot Microphone............................................................................................. 58
Alternating Hot Microphone.............................................................................................. 59
Silent Emergency Mode....................................................................................................59
Invisible Emergency..........................................................................................................60
Disaster Alert.................................................................................................................... 60
Initializing Disaster Alert Calls...........................................................................................60
Exiting Emergency Operations......................................................................................... 60
Repeater Mode............................................................................................................................ 61
Chapter 4: GPS Location Service........................................................................... 63
Enhancing GPS Performance......................................................................................................64
Enabling GPS.............................................................................................................................. 64
GPS Icon..................................................................................................................................... 64
GPS Different Location Displays................................................................................................. 64
Viewing Your Position..................................................................................................................65
Changing GPS Accuracy............................................................................................................. 65
Send Feedback
Contents
GPS – Things to Keep in Mind.................................................................................................... 65
Chapter 5: Main Menu..............................................................................................67
Scrolling through the Menu..........................................................................................................67
Menu Icons.................................................................................................................................. 67
Messages.................................................................................................................................... 68
New Message................................................................................................................... 68
Sending Messages to Private/Phone..................................................................... 69
Sending Messages to Groups................................................................................69
Sending Store and Forward Messages..................................................................69
Delivery Report...................................................................................................... 70
Viewing Delivery Reports....................................................................................... 70
Configuring Delivery Reports................................................................................. 70
Inbox................................................................................................................................. 71
Entering the Inbox.................................................................................................. 71
Receiving New Messages......................................................................................71
Using Submenus in the Inbox and the Outbox.......................................................72
Embedded Number................................................................................................ 72
Storing Numbers from Messages...........................................................................72
Calling Numbers in Messages............................................................................... 73
Making Group Calls on theTalkgroup of the Message Sender.............................. 73
Immediate Message...............................................................................................73
Outbox.............................................................................................................................. 73
CO Box............................................................................................................................. 74
RMS Box...........................................................................................................................74
WAP Box...........................................................................................................................74
Templates......................................................................................................................... 74
Sending User-Defined Templates.......................................................................... 74
Setting User-Defined Templates............................................................................ 75
Predefined Templates.......................................................................................................75
Viewing Predefined Templates.............................................................................. 75
Sending Predefined Templates..............................................................................75
Status Messages.............................................................................................................. 75
Viewing a Status Message Number....................................................................... 76
Sending Status Messages..................................................................................... 76
Targeted Status Messages.................................................................................... 76
Sending Targeted Status Messages...................................................................... 76
Contacts.......................................................................................................................................77
Creating Contacts............................................................................................................. 77
Editing Contacts................................................................................................................78
Send Feedback
Contents
Deleting Numbers............................................................................................................. 78
Deleting Contacts..............................................................................................................78
Checking Capacity............................................................................................................ 78
Dialing through the Contact List........................................................................................79
Bluetooth......................................................................................................................................79
Bluetooth Interactions....................................................................................................... 80
Enabling and Disabling Bluetooth..................................................................................... 80
Discoverable Mode........................................................................................................... 80
Configuring Bluetooth Settings......................................................................................... 80
Devices............................................................................................................................. 81
Pairing Bluetooth Devices with Your Radio............................................................81
Connecting/Disconnecting Devices........................................................................81
Managing Devices..................................................................................................82
Disconnecting All Devices.................................................................................................82
Indoor Location................................................................................................................. 82
Firearms............................................................................................................................83
Browser........................................................................................................................................83
Security........................................................................................................................................83
PIN Protect........................................................................................................................83
Protecting the Radio with a PIN Code....................................................................84
Unblocking Your Radio.......................................................................................... 84
Changing PIN Codes............................................................................................. 84
Keylock Setup................................................................................................................... 85
Keypad Lock Notification........................................................................................85
Setting Automatic Keylock Delay........................................................................... 85
Setting Keylock on Startup.....................................................................................85
Air Encryption....................................................................................................................85
Viewing the Air Encryption State............................................................................86
Air Encryption Key Deletion................................................................................... 86
K Validity........................................................................................................................... 86
Verifying K Validity................................................................................................. 86
SCK (Air Interface Encryption Class 2).............................................................................87
TMO SCK...............................................................................................................87
DMO SCK.............................................................................................................. 87
Changing DMO SCK.............................................................................................. 87
Verifying TMSCK Validity..................................................................................................87
Verifying DMSCK Validity................................................................................................. 88
Covert Mode..................................................................................................................... 88
Activating the Covert Mode.................................................................................... 88
Send Feedback
Contents
SDS Remote Control........................................................................................................ 89
Setting SDS Remote Control................................................................................. 89
Setup........................................................................................................................................... 89
Ring Style..........................................................................................................................89
Setting Ring Style...................................................................................................89
Set Volume....................................................................................................................... 89
Setting Volume.......................................................................................................90
Language.......................................................................................................................... 90
Setting Language................................................................................................... 90
Data Setup........................................................................................................................ 90
Setting Data Function.............................................................................................91
Audio.................................................................................................................................91
Audio Profiles......................................................................................................... 91
Setting Audio Profiles.............................................................................................91
Howling Suppression............................................................................................. 91
Setting Howling Suppression................................................................................. 92
Audio Toggle.......................................................................................................... 92
Setting Audio Toggle..............................................................................................92
Volume Adjustment Mode...................................................................................... 92
Setting Volume Adjustment Mode..........................................................................92
Tones................................................................................................................................ 93
Keypad Tone..........................................................................................................93
Setting Keypad Tone..............................................................................................93
All Tones................................................................................................................ 93
Setting All Tones.................................................................................................... 93
Talk Permit............................................................................................................. 93
Setting Talk Permit.................................................................................................93
Clear to Send......................................................................................................... 94
Setting Clear to Send............................................................................................. 94
Periodic Alert..........................................................................................................94
Setting Periodic Alert..............................................................................................94
D-PTT Tones..........................................................................................................94
Setting D-PTT Tones............................................................................................. 94
Display.............................................................................................................................. 95
Setting Flip Display................................................................................................ 95
Setting Font Level.................................................................................................. 95
Setting Large Idle Font...........................................................................................95
Setting Screen Saver............................................................................................. 96
Setting Backlight.................................................................................................... 96
Send Feedback
Contents
Setting Brightness.................................................................................................. 96
Setting LCD Off...................................................................................................... 96
Setting Wallpaper...................................................................................................97
Time and Date.................................................................................................................. 97
Setting the Time Format.........................................................................................97
Setting the Time Manually......................................................................................97
Setting the Date Format......................................................................................... 97
Setting the Date Manually...................................................................................... 98
Setting Time Offset................................................................................................ 98
Setting Automatic Updates for the Time and Date ................................................98
Energy Economy...............................................................................................................98
Enabling Energy Economy.....................................................................................98
Viewing the Energy Economy Status..................................................................... 99
Transmission Power Class............................................................................................... 99
Selecting RF Power............................................................................................... 99
Accry (Accessory) Setup...................................................................................................99
Selecting CORE/Other/Secondary Accessories.................................................. 100
Book On.......................................................................................................................... 100
Rotary Knob.................................................................................................................... 100
Setting Rotary Lock..............................................................................................100
Setting In Keypad Lock........................................................................................ 100
Setting Rotary Knob Wrap Around.......................................................................101
Setting Rotary Knob Scroll Range....................................................................... 101
Setting Rotary Knob Talkgroup Selection............................................................ 101
Setting Rotary Knob Function Keys..................................................................... 101
Group Setup.............................................................................................................................. 102
Standard Home Group....................................................................................................102
Operations Parameters........................................................................................ 102
Scan................................................................................................................................103
Activating Talkgroup Scanning.............................................................................103
Setting Talkgroups in the Active Scan List...........................................................103
Setting Scan Lists................................................................................................ 104
Deleting Talkgroups from Scan Lists................................................................... 104
My Groups...................................................................................................................... 104
Adding Favorite Folders....................................................................................... 104
Adding Talkgroups to Favorite Folders................................................................ 104
Editing My Folder List...........................................................................................105
Deleting Talkgroup from Favorite Folders............................................................105
Favorites.................................................................................................................................... 105
Send Feedback
Contents
Adding Talkgroups to Favorites...................................................................................... 105
Managing Folders in Favorites........................................................................................106
Deleting Folders from Favorites......................................................................................106
Deleting Items from Favorites Folder..............................................................................106
Deleting All Items from Favorite Folders.........................................................................106
My Info....................................................................................................................................... 107
Viewing and Modifying Personal Information..................................................................107
Recent Calls.............................................................................................................................. 107
Viewing Recent Calls...................................................................................................... 107
Calling from Recent Calls............................................................................................... 108
Storing Recent Calls to Contacts.................................................................................... 108
Deleting Recent Calls..................................................................................................... 108
Shortcuts....................................................................................................................................109
Creating Menu Shortcuts................................................................................................ 109
Editing Menu Shortcut Lists............................................................................................ 109
Networks....................................................................................................................................109
Selecting Network Operation Mode................................................................................ 110
Selecting Your Network.................................................................................................. 110
Using the Select Net Registration................................................................................... 110
Using the Foreign Network Registration......................................................................... 111
Location..................................................................................................................................... 111
Viewing Your Position..................................................................................................... 111
Viewing Testpage........................................................................................................... 111
Changing GPS Accuracy................................................................................................ 111
Packet Data............................................................................................................................... 112
Viewing Data Statistics................................................................................................... 112
Viewing Encryption Status.............................................................................................. 112
Crypto Menu.............................................................................................................................. 113
Setting Clear Call Alarm..................................................................................................113
Updating Encryption Keys...............................................................................................113
Viewing OPTA.................................................................................................................113
Setting OPTA Filter......................................................................................................... 114
Starting Crypto Registration............................................................................................114
Configuring Audio Settings............................................................................................. 114
Setting DMO Encryption Mode....................................................................................... 114
Setting Encryption Keys for SDS Messages...................................................................114
Chapter 6: Features............................................................................................... 117
Private Call................................................................................................................................ 117
Making Private Calls....................................................................................................... 117
10
Send Feedback
Contents
Radio Messaging System (RMS)...............................................................................................117
RMS Icons...................................................................................................................... 118
Sending an RMS Status..................................................................................................118
One-Touch Dial..........................................................................................................................118
Talkgroup Dialing by Index........................................................................................................ 118
Viewing the Talkgroup Speed Number........................................................................... 118
Selecting Talkgroups by Index........................................................................................119
Phone and PABX Calls..............................................................................................................119
Making Phone or PABX Calls......................................................................................... 119
Phone/PABX Speed Dial........................................................................................................... 119
Using the Phone/PABX Speed Dial................................................................................ 119
MS-ISDN....................................................................................................................................119
Short Number Dial..................................................................................................................... 120
RUA/RUI.................................................................................................................................... 120
WAP...........................................................................................................................................120
WAP Browser..................................................................................................................121
Entering the Browser...................................................................................................... 121
Entering Browser Menu Panes....................................................................................... 121
Tips for Browsing............................................................................................................ 121
Creating Bookmarks through the Navigate Pane.................................................121
Creating Bookmarks through the Bookmarks Pane............................................. 122
Using Bookmarks................................................................................................. 122
Creating Hotkeys..................................................................................................122
Using Hotkeys...................................................................................................... 122
Saving Pages....................................................................................................... 123
Selecting Saved Pages........................................................................................ 123
Disabled Packet Data Service........................................................................................ 123
Disabled Browser Entry.................................................................................................. 123
Keys Usage.....................................................................................................................123
Browser Menu Panes Overview......................................................................................124
Navigate Pane................................................................................................................ 125
Advanced........................................................................................................................ 125
Bookmarks Pane.............................................................................................................126
Working with the Options Pane for Selected Bookmarks.....................................126
Working with the Saved Pages Folder................................................................. 126
History Pane................................................................................................................... 127
Navigating to Recently Visited URLs................................................................... 127
Tools Pane......................................................................................................................127
Options Pane.................................................................................................................. 127
Send Feedback
11
Contents
Image Pane.....................................................................................................................127
Text Input Pane...............................................................................................................128
Call-Out......................................................................................................................................128
Types of Call-Out Alerts..................................................................................................129
Call-Out Modes Interaction............................................................................................. 129
Call-Out Service Phases.................................................................................................129
Appendix A: Tones..................................................................................................131
Appendix B: LED Indications.................................................................................133
Appendix C: Troubleshooting................................................................................135
Appendix D: Maintenance...................................................................................... 139
Storage...................................................................................................................................... 139
Extending Battery Life................................................................................................................139
Battery Charging Temperature.................................................................................................. 139
Battery Charging Rules..............................................................................................................139
Additional Battery Warnings/Cautions....................................................................................... 139
Looking after Your Radio........................................................................................................... 140
12
Send Feedback
List of Figures
List of Figures
Figure 1: Charger Mode Screen ............................................................................................................ 27
Figure 2: Trunked Mode Operation ....................................................................................................... 47
Figure 3: Direct Mode Operation ........................................................................................................... 52
Figure 4: Repeater Mode Operation ......................................................................................................61
Figure 5: Call-Out Message .................................................................................................................128
Send Feedback
13
This page intentionally left blank.
List of Tables
List of Tables
Table 1: Special Notations .....................................................................................................................21
Table 2: Product Technical Information .................................................................................................23
Table 3: Battery Icons ............................................................................................................................27
Table 4: LED Indicators ......................................................................................................................... 27
Table 5: Controls and Indicators ............................................................................................................29
Table 6: Display .....................................................................................................................................30
Table 7: Colors of the Soft Key Area ..................................................................................................... 31
Table 8: Status Icons .............................................................................................................................32
Table 9: Talkgroup Icon .........................................................................................................................37
Table 10: One-Touch Button Features .................................................................................................. 38
Table 11: During the Call .......................................................................................................................41
Table 12: Text Entry Screen Icons ........................................................................................................ 42
Table 13: Keys Usage ........................................................................................................................... 43
Table 14: Other Keys .............................................................................................................................43
Table 15: Different Location Displays ....................................................................................................64
Table 16: Menu Icons ............................................................................................................................ 67
Table 17: Inbox Icons ............................................................................................................................ 71
Table 18: Outbox Icons ......................................................................................................................... 73
Table 19: Contact Types ....................................................................................................................... 77
Table 20: RMS Icons ........................................................................................................................... 118
Table 21: Browser Keys Usage ........................................................................................................... 124
Table 22: Browser Menu Panes .......................................................................................................... 124
Table 23: Additional Menu Panes ........................................................................................................125
Table 24: Browser Text Input Icons .....................................................................................................128
Table 25: Radio Tones ........................................................................................................................ 131
Table 26: LED Indications ................................................................................................................... 133
Table 27: Displayed Messages ........................................................................................................... 135
Send Feedback
15
This page intentionally left blank.
Copyrights
Copyrights
The Motorola products described in this document may include copyrighted Motorola computer
programs. Laws in the United States and other countries preserve for Motorola certain exclusive rights
for copyrighted computer programs. Accordingly, any copyrighted Motorola computer programs
contained in the Motorola products described in this document may not be copied or reproduced in any
manner without the express written permission of Motorola.
©
2015 Motorola Solutions, Inc. All Rights Reserved.
No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, without the prior written
permission of Motorola Solutions, Inc.
Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by
implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of
Motorola, except for the normal nonexclusive, royalty-free license to use that arises by operation of law
in the sale of a product.
Disclaimer
Please note that certain features, facilities, and capabilities described in this document may not be
applicable to or licensed for use on a particular system, or may be dependent upon the characteristics
of a particular mobile subscriber unit or configuration of certain parameters. Please refer to your
Motorola contact for further information.
Trademarks
MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other
trademarks are the property of their respective owners.
European Union (EU) Waste of Electrical and Electronic Equipment (WEEE)
directive
The European Union's WEEE directive requires that products sold into EU countries must have the
crossed out trashbin label on the product (or the package in some cases).
As defined by the WEEE directive, this cross-out trashbin label means that customers and end-users in
EU countries should not dispose of electronic and electrical equipment or accessories in household
waste.
Customers or end-users in EU countries should contact their local equipment supplier representative or
service centre for information about the waste collection system in their country.
Open Source Software (OSS) Legal Notices
For details on OSS Legal Notices visit Motorola Online (emeaonline.motorolasolutions.com) or browse
the CPS Plus disc.
Send Feedback
17
This page intentionally left blank.
General Information
Chapter 1
General Information
Icon Conventions
The documentation set is designed to give the reader more visual clues. The following graphic icons
are used throughout the documentation set. These icons and their associated meanings are described
below.
DANGER: The signal word DANGER with the associated safety icon implies information that, if
disregarded, will result in death or serious injury.
WARNING: The signal word WARNING with the associated safety icon implies information that,
if disregarded, could result in death or serious injury, or serious product damage.
CAUTION: The signal word CAUTION with the associated safety icon implies information that,
if disregarded, may result in minor or moderate injury, or serious product damage.
CAUTION: The signal word CAUTION may be used without the safety icon to state potential
damage or injury that is not related to the product.
IMPORTANT: IMPORTANT statements contain information that is crucial to the discussion at
hand, but is not CAUTION or WARNING. There is no warning level associated with the
IMPORTANT statement.
NOTICE: NOTICE contains information more important than the surrounding text, such as
exceptions or preconditions. They also refer the reader elsewhere for additional information,
remind the reader how to complete an action (when it is not part of the current procedure, for
instance), or tell the reader where something is located on the screen. There is no warning level
associated with a notice.
Declaration of Conformity
Declaration of Conformity is applicable to your radio only if your radio is labeled with the FCC logo
shown below.
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name:
Motorola Solutions, Inc.
Address:
1303, East Algonquin Road, Schaumburg, Illinois 60196, U.S.A. Phone Number: 1-800-927-2744
Hereby declares that the product:
Model Name: MTP3250
conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)
Class B Digital Device
Send Feedback
19
Chapter 1: General Information
As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause undesired
operation.
NOTICE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
While the device is communicating with the laptop, the laptop charger must be disconnected.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Important Safety Information
RF Energy Exposure and Product Safety Guide For Two-Way Radios
CAUTION: Before using this product, read the RF Energy Exposure and Safety Guide For TwoWay Radios that ships with the radio. The Guide contains operating instructions for safe usage,
important RF energy awareness and control information as well as regulatory information, to
help ensure compliance with applicable standards and regulations. This radio is restricted to
occupational use only. Any modification to this device, not expressly authorized by Motorola,
may void the user’s authority to operate this device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter has been approved by Industry Canada to operate with the Motorola-approved
antenna types with the maximum permissible gain and required antenna impedance for each antenna
type indicated. Antenna types not included, having a gain greater than the maximum gain indicated for
that type, are strictly prohibited for use with this device.
Notice to Users (FCC and Industry Canada)
This device complies with Part 15 of the FCC rules and RSS 210 of the Industry Canada rules per the
conditions listed below:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired
operation.
3 Changes or modifications made to this device, not expressly approved by Motorola, could void the
user's authority to operate this equipment.
20
Send Feedback
Chapter 1: General Information
Informations importantes sur la sécurité
Exposition aux radiofréquences et sécurité du produit pour radios
bidirectionnelles portatives
CAUTION: Cette radio ne doit être utilisée qu'à des fins professionnelles. Avant d'utiliser la
radio, lisez le guide Exposition aux radiofréquences et sécurité du produit pour radios
bidirectionnelles portatives, qui contient d'importantes instructions de fonctionnement pour une
utilisation sécuritaire et des informations sur l'exposition aux fréquences radioélectriques afin
d'assurer la conformité aux normes et règlements applicables.
Selon la règlementation d'Industrie Canada, cet émetteur radio ne peut être utilisé qu'avec une
antenne dont le type et le gain maximal (ou minimal) sont approuvés par Industrie Canada pour cet
émetteur. Afin de limiter les interférences radio pour les autres utilisateurs, le type et le gain de
l'antenne doivent être choisis de façon à ce que la puissance isotrope rayonnée équivalente (P.I.R.E.)
ne soit pas plus forte qu'il ne le faut pour établir la communication.
Le présent émetteur a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne
agréés par Motorola et ayant un gain admissible maximal ainsi que l'impédance requise pour chaque
type d'antenne indiqué. Les types d'antenne non inclus, dont le gain est supérieur au gain maximal
indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Avis aux utilisateurs (FCC et Industrie Canada)
Cet appareil est conforme à la Partie 15 des règlements de la FCC et RSS 210 du règlement
d'Industrie Canada selon les conditions énumérées ci-dessous:
1 Ce dispositif ne doit pas causer d'interférences nuisibles.
2 Cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent
perturber le fonctionnement.
3 Les changements ou les modifications apportées à ce dispositif, non expressément approuvées par
Motorola, peuvent annuler le droit de l'utilisateur à utiliser cet équipement.
Using this Guide
The following special notations are used throughout the text to highlight certain information or items:
Table 1: Special Notations
Example
Description
MENU key or EMERGENCY button
Capital letters indicate a name of a key or button.
Entering TMO tone
Italic words indicate a name of the tone.
Powering Off
Bold words indicate the soft menu items, MMI
strings, or messages displayed on the radio.
Setup → Tones → All Tones
Bold words with the arrow between indicate navigation structure in the menu items.
Feature and Service Availability
This guide describes all available radio features and services. Your service provider may have
customized your radio to optimize its use for your individual needs. Check with you service provider to
find out the differences from this guide.
Send Feedback
21
This page intentionally left blank.
Getting Started
Chapter 2
Getting Started
This chapter contains basic information on how to use the radio.
Product Technical Information
Table 2: Product Technical Information
Description
Value
Maximum Voltage
4.2 V
Maximum Current
4.7 A
Rated RF Power
1 or 1.8 W (switchable)
Maximum Speaker Load
2 W at 16 Ω
Antenna Impedance
50 Ω
Operating Temperature Range
-30 °C to +60 °C
Storage Temperature Range
-40 °C to +85 °C
Ingress Protection Rating
IP65
Audio Power Through the Radio
and Accessories
RMS: 2 W
Operating Time
Duty Cycle
Class 4 (1 W)
Class 3L (1.8 W)
Standard 1650 mAH Battery
05/05/90
> 16 h
> 15 h
05/35/60
> 12 h
> 11 h
05/05/90
> 21 h
> 20 h
05/35/60
> 16 h
> 15 h
2150 mAH Battery
Peak Power: 4 W
NOTICE: The communication system determines the radio transmit and receive time (operating
cycle time). During overload, or beyond the systems specifications at high ambient
temperatures, the thermal control cuts down the RF power output, which reduces the radio
coverage range.
You can attach a colorful o-ring to a radio antenna to distinguish radios from one another.
An RFID knob is available as an optional accessory which allows tracking radios easily. The
knob contains an RFID tag which can be read by handheld scanners greatly enhancing the
speed of radio identification. The knob is a retrofit option and can replace an existing volume
knob.
Before Power On
Read this section before you power on your radio for the first time.
Send Feedback
23
Chapter 2: Getting Started
Attaching the Antenna
Procedure:
1 Insert the screw-in base of the antenna into the antenna terminal on the top of the radio.
2 Turn clockwise until snug.
IMPORTANT: Use only the antenna intended for the radio. Make sure that the antenna
has an operating frequency engraving and a color ring at the bottom of the thread. Use of
other antennas can result in significant range loss due to poor RF performance.
Inserting the SIM Card
Prerequisites: Turn off your radio before inserting the SIM card.
Procedure:
1 Remove the battery.
2 Open a plastic SIM card cover.
3 Slide a SIM card latch towards the bottom of the radio and lift the latch.
24
Send Feedback
Chapter 2: Getting Started
4 Place the SIM card in a socket with the contact area facing down. Pay attention to the correct
position of the notched corner.
5 Close the SIM card latch and slide it towards the top of the radio.
6 Close the plastic SIM card cover.
7 Replace the battery.
Installing the Battery
Procedure:
1 Insert the battery into the compartment.
2 Slide the battery towards the top of the radio until it clicks.
Related Links
Removing the Battery on page 25
Removing the Battery
Prerequisites: Turn off the radio.
Procedure:
1 Push up and hold the latch at the bottom of the battery.
Send Feedback
25
Chapter 2: Getting Started
2 Slide the battery away.
Related Links
Installing the Battery on page 25
Charging the Battery
You can charge a battery alone or/and a battery attached to a radio.
Charging a battery attached to a radio can be done with the radio either turned on or off. The battery
charges faster when the radio is turned off.
IMPORTANT: Motorola approved chargers provide optimal performance. Other chargers may
fail to fully charge or reduce the life of the battery.
Prerequisites:
Do not charge the battery in a hazardous area.
IMPORTANT: Do not connect a radio without a battery to the charger.
Procedure:
1 Connect the charger to an appropriate power source (100–240 V, 12 V), according to the
specification of the charger.
2 Perform one of the following actions:
•
Desktop chargers – insert the battery or the radio with the battery attached into the
appropriate socket of the charger. Ensure that the battery/radio made good connection with
the charger and that the LED on the charger is indicating that charging is in progress
•
Travel chargers and car chargers – connect the charger to the radio with the battery
attached. Ensure that the charger is firmly connected to the radio and that the radio display is
indicating that charging is in progress.
NOTICE: If a multi-unit charger LED indicates an error (blinking red light) when radio is
inserted and being charged with the multi-unit charger (MUC), please re-insert the radio.
If, after several reconnections to the charger, the light is still red, the battery may be
damaged or depleted.
Postrequisites: The battery may heat up during charging. After charging, make sure that the battery
and the radio are within the operating temperature range before using the radio.
Charging the Battery By Using a USB Cable
Prerequisites: Make sure that Motorola Customer Programming Software (CPS) or the USB Charging
Driver Tool (available on the CPS installation CD) is installed on your computer.
For more information on CPS, contact your service provider.
Procedure:
1 Turn on the radio.
2 Connect the radio to the computer with the USB cable.
NOTICE: When a radio, which is powered off with a fully charged battery is connected to
a computer USB port, the status LED may light up red. Pressing the END key will activate
the Charger Mode.
IMPORTANT: Do not connect/disconnect the USB cable while USB Cable
Disconnected or Charger Connected notifications are displayed.
26
Send Feedback
Chapter 2: Getting Started
Charging Indicators
When the radio is turned on while charging, an appropriate Battery Charge Progress icon is displayed
in the status icon area.
When the radio is turned off while charging, a Charger Mode screen is shown on the display. The
screen contains an appropriate Battery Charge Progress icon and charging progress expressed in
percentage.
Figure 1: Charger Mode Screen
Table 3: Battery Icons
Battery Capacity
0%–5%
5%–15%
15%–25%
25%–40%
40%–60%
60%–80%
80%–100%
60%–80%
80%–100%
Battery Charge Progress
0%–5%
5%–15%
15%–25%
25%–40%
40%–60%
Table 4: LED Indicators
Indication
Status
Solid green
Battery fully charged
Blinking green
Battery charged at 90%
Solid red
Rapid charge
Blinking red
Faulty or invalid battery
Blinking orange
Battery is waiting to charge
NOTICE:
When you charge your radio in a multi-unit charger and the battery is at the 90–100% charge
level, the LED indicators on the radio and on the multi-unit charger differ:
•
LED on the radio – blinking green
•
LED on the multi-unit charger – solid green
For more accurate representation of the charging levels refer to LED Indications on page 133.
NOTICE:
If you insert a radio with a deeply discharged battery into the multi-unit charger, the LED on the
radio may indicate a charging error (blinking red). This can be cleared by reinserting the radio.
Send Feedback
27
Chapter 2: Getting Started
Low Battery Indication
The radio indicates low battery level by playing an audible alert when the battery charge falls to a
preset level. The low battery alert can be programmed by your service provider to 5, 10, or 20 per cent
of remaining capacity. The default setting is 5 per cent. The service provider also configures how
frequently the alert repeats.
Controls and Indicators
12
13
14
15
16
17
18
19
10
11
28
Send Feedback
Chapter 2: Getting Started
Table 5: Controls and Indicators
Annotation
Description
TALKGROUP KNOB
Rotate to select a different talkgroup.
VOLUME KNOB
Rotate to set the volume.
TOP MICROPHONE
Activated during Simplex, high audio calls such as Group Calls.
LED
SIDE button
Programmable button, by default, the upper SIDE button is set to the Flip Display feature and the lower SIDE button is set to the Hi/Low Audio feature.
NOTICE: The required time to press and hold SIDE button to activate an
One-Touch Button feature is set as default to 0,1 second.
PTT (Push-To-Talk)
•
Press and hold to talk in simplex calls or to initiate a group call, release it to listen.
•
Press to send status and text messages.
SOFT key
Press left or right SOFT key, to select the option that appears on the screen directly
above them.
SEND key
Press to initiate or answer duplex calls, or send messages.
SPEAKER
10
BOTTOM MICROPHONE
Activated during Duplex, low audio calls such as Private Calls.
11
CHARGER CONNECTOR
Provides connection for programming and data transfer.
12
ANTENNA
13
EMERGENCY button
Press and hold EMERGENCY button to enter Emergency operation. When your radio is
off, press and hold to power on in Emergency Mode.
14
ACCESSORY CONNECTOR
Provides connection for accessories.
15
DISPLAY
Provides alphanumeric text and images within 65,536 colors and 132x90 pixels with
scalable fonts and contrast.
NOTICE: The DISPLAY can be in color and grayscale mode.
16
MENU key
•
From the home screen, press to enter the main menu.
Table continued…
Send Feedback
29
Chapter 2: Getting Started
Annotation
Description
•
17
Used to enter the context-sensitive menu.
ON/OFF/END/HOME key
•
Press and hold to turn on/off your radio.
•
Press to end calls.
•
Press to return to the home screen.
NOTICE: If a message or notification is displayed on the radio and the
Screen Saver activates, pressing ON/OFF/END/HOME only deactivates
the Screen Saver.
18
NAVIGATION key
Press up, down, left or right NAVIGATION key for list scrolling, while moving around the
menu hierarchy, or for alphanumeric text editing.
From the home screen, press to activate one of the following:
19
•
Down NAVIGATION key — enters Recent Calls menu item.
•
Up NAVIGATION key — changes My Groups talkgroup folder.
•
Left and right NAVIGATION key — toggles through the talkgroups.
KEYPAD
Use the keypad to enter alphanumeric characters for dialing, contact entries, and
text messages.
Your radio supports the One-Touch Button feature that allows you to activate commonly used features by pressing and holding assigned key (0-9, * and #).
NOTICE: The required time to press and hold assigned key to activate an
One-Touch Button feature is set as default to 1 second.
NOTICE: A detailed list of compatible accessories is included in Accessory Leaflet, part
number: 68015000843. To obtain the document, contact your service provider.
Display
This section presents the radio's default home screen elements.
Table 6: Display
Annotation
Description
Status icon area
Table continued…
30
Send Feedback
Chapter 2: Getting Started
Annotation
Description
Text display area
SOFT key area
MENU/Context sensitive icon
The color of the SOFT key area changes according to the mode the radio is in.
Table 7: Colors of the SOFT Key Area
Color
Mode or State
Light blue
Normal TMO and DMO Modes
Light red
Emergency Mode or Disaster Alert Call
Olive
Local Site Trunking Mode
Yellow
Call Out — Standby
Red
Call Out — Alert
Green
Call Out — Accepted
Blue
Radio Messaging Service (RMS)
Grey
Radio User Assignment (RUA) — Limited service
Related Links
Display on page 95
Configurable Idle Screen
Your service provider can configure the information that is displayed on the idle screen below the
status icon area. Depending on the radio configuration and services supported, the following
information can be displayed:
•
Network alias
•
Range alias
•
Talkgroup alias
•
Time and date
•
Home mode display
•
RMS/FMS
•
ISSI
•
Radio status
•
Audio profile name
Status Icons
Status icons appear when your radio is engaged in certain activities or when you have activated certain
features.
Send Feedback
31
Chapter 2: Getting Started
Table 8: Status Icons
Icon
Description
Trunked Mode Operation
In Service
No Service
Signal Strength – The more bars, the stronger the signal.
RF Power — Indicates the High RF Power is enabled. Shows the signal strength.
The more bars, the stronger the signal.
Migration — Displayed when your radio is registered to the foreign network.
Broadcast Call — Displayed when the radio is in the Broadcast Call.
Scan — Indicates talkgroup scanning is activated in the radio.
Packet Data / Multi-Slot Packet Data (MSPD) — The more blue sections on the icon,
the faster the data transfer. Possible three states:
•
Four gray sections: context activated – data idle
•
One blue (from the left): Packet Data active
•
Two blue (from the left): Multi Slot Packet Data active
Direct Mode Operation
Direct Mode Call — Displayed when the radio is receiving a Direct Mode call. The
more bars, the stronger the signal.
or
High RF Power: idle or transmitting — Displayed when the High RF Power option is
enabled and the radio is either in the idle mode or transmitting a call.
High RF Power: receiving — Displayed when the High RF Power option is enabled
and the radio is receiving a call.
Direct Mode — Displayed when the radio is in Direct Mode (radio-to-radio communication).
DMO Gateway Communication Mode — Indicates that gateway is selected. The
icon has the following states:
•
Solid — while the radio is synchronized with the gateway.
•
Blinking — while the radio is not synchronized or during attachment.
•
No icon — during a radio to radio and repeater call.
DMO Repeater Communication Mode — Displayed when the Repeater or GW +
Rep option in DMO Mode is selected. This icon has the following states:
•
Solid — while the radio has detected the repeater (for example when the radio
receives a presence signal).
•
Blinking — while the radio has not detected the repeater or during attachment.
•
No icon — during a radio to radio and gateway call.
Table continued…
32
Send Feedback
Chapter 2: Getting Started
Icon
Description
General Icons
All Tones Off and Duplex and Simplex Ring Muted — Indicates that all alert tones
are off and both duplex an simplex ring volume is set to 0.
All Tones Off — Indicates that:
•
Volume is set to 0 (when Volume Adj. Mode is set to Common).
•
Both simplex and duplex ring volume is set to 0 (when Volume Adj. Mode is set
to Individual).
Simplex Ring Muted — Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0.
Duplex Ring Muted — Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0.
Low Audio — Indicates that the audio mode is changed to low.
High Audio — Indicates that the audio mode is changed to high.
Earpiece Connected — Indicates that the earpiece is connected.
GPS Icon
•
Solid - the radio has a location fix
•
Blinking - the radio is acquiring a location fix. This is an optional setting and may
not be enabled on your radio.
Battery Strength — Shows the charge of your battery.
Battery Charging — Indicates that the battery is charging.
Emergency — Appears while the radio is in Emergency Operation.
New Message Has Arrived — Indicates a new message just arrived.
New Message(s) in Inbox — Indicates that you have unread messages in your Inbox.
Unread (New) WAP Message — Indicates that new page was loaded to the browser.
Call-Out — Indicates Call-Out alert.
Call-Out Alert Arrived — Indicates a receipt of a new Call-Out message.
Call-Out Alert Unread — Indicates unread alert in the CO Box.
Encryption Off
Blinking, indicates that the SIM Card End-to-End Encryption is disabled in DMO
and TMO Modes.
Table continued…
Send Feedback
33
Chapter 2: Getting Started
Icon
Description
SIM End-to-End Encryption (E2EE)
Solid, indicates that the SIM Card End-to-End Encryption is enabled in TMO
Mode.
SIM End-to-End Encryption (E2EE)
Solid, indicates that the SIM Card End-to-End Encryption is enabled in DMO
Mode. Numbers 1 and 2 point to the type of DMO Encryption keys that has been
selected.
or
Unread (New) WAP Message — Indicates that you have not entered WAP Box
since last WAP message was received (Blinks when the priority is high).
WAP Message Icon — Displayed next to the priority in the message list view.
WAP Message Time — Displayed next to the create date in the message list view.
WAP Message Expiration — Displayed next to the expiry date in the message list
view.
WAP Message Title Icon — Displayed next to the title along with the text in the message list view.
Keys Locked — Indicates that keys are locked.
Bluetooth Connected
Indicates that Bluetooth is enabled and at least one device is connected.
Bluetooth Disconnected
Solid indicates that Bluetooth is enabled, but no device is connected.
Blinking indicates that Bluetooth is enabled and a connection with a remote device is being established.
Remote Control
Indicates that the radio is being remotely controlled and some commands are being executed in the background. For example, when the radio is controlled via
special SDS messages or triggered to send a GPS location report.
Related Links
Air Encryption on page 85
Powering On the Radio
Procedure:
1 Press and hold ON button.
2 Your radio performs a self-check and registration routine.
3 After successful registration, your radio is in service.
NOTICE: Your radio powers on without visible and audible notification if Covert Mode is
activated.
34
Send Feedback
Chapter 2: Getting Started
Unlocking Your Radio
Your radio may be locked at power up. To unlock it after powering on, enter the code at the prompt.
Your radio enters the default home display.
NOTICE: The unlock code is originally set to 0000. Your service provider may change this
number before you receive your radio.
Related Links
PIN Protect on page 83
Changing PIN Codes on page 84
Writing Text on page 41
Unblocking Your Radio
Prerequisites: You blocked your radio by entering incorrect PIN code for three times (by default).
Procedure:
1 Radio displays Unit BlockedEnter PUK.
2 Enter 8–digit PUK (Personal Unblocking Key) number.
NOTICE: The PUK is an eight-digit master code provided by your service provider.
3 Enter the new PIN code twice.
Locking/Unlocking the Keys/Buttons
Press MENU key and * key.
NOTICE: The EMERGENCY button is not locked. Entering Emergency Mode unlocks all keys.
Related Links
Keylock Setup on page 85
Holding Your Radio
The radio has two microphones: a top microphone for simplex dispatcher/private calls and a bottom
microphone for duplex telephone-like calls.
Also, the radio is equipped with an internal speaker for high audio (located at the middle of the unit)
and an internal earpiece for low audio (located at the top of the unit).The audio can be routed either to
the speaker or the earpiece using the Audio Toggle menu (MENU → Setup → Audio → Audio Toggle)
or the assigned One-Touch Button.
NOTICE: When possible, it is recommended to speak into the top microphone.
Simplex Calls
When using high audio, hold the radio a vertical position with its top microphone 5 centimeters to 10
centimeters away from your mouth. Speak into the top microphone. Listen through the internal
speaker. Keep the antenna at least 2.5 centimeters from your head and body.
Send Feedback
35
Chapter 2: Getting Started
Duplex Calls
When using low audio, hold your radio as you would a telephone. Speak into the bottom microphone.
Listen via the earpiece. Keep the antenna at least 2.5 centimeters from your head and body.
Lapel/Shoulder Use
For Group and Private Calls turn your head towards your shoulder/lapel, and speak directly into the top
microphone. Listen through the internal speaker.
Speakerphone Use
Place your radio 30 centimeters to 60 centimeters away from you. In a noisy environment, you move
the radio closer to you for better transmission.
Entering TMO / DMO Mode
Procedure:
1 From the home screen, press Optns.
2 Select Trunked Mode / Direct Mode.
Related Links
Selecting Network Operation Mode on page 110
Networks on page 109
Transmit Inhibit Mode
The Transmit Inhibit Mode is a mode in which the radio sends no radio transmissions. It is
recommended to activate the mode in RF sensitive areas, for example hospitals, airplanes, where
safety can be jeopardized due to transmission radiation.
To activate, select MENU → Networks → TXI Mode → Activate.
In this mode, the radio does not transmit under any circumstances except for the Emergency Calls. All
the functions and keys which cause transmission, for example registration to the network, changing
talkgroup or folder, sending SDS messages, or pressing the PTT button are disabled. Any transmission
trial causes the radio to display Not Allowed In TXI Mode notification and to play a tone.
Your radio can still receive:
•
Group calls.
•
Messages — stored in the Inbox.
•
Private call attempts — stored in the Missed Calls list, without the option to respond.
36
Send Feedback
Chapter 2: Getting Started
When no danger to safety exists anymore (for example, you leave the RF sensitive area), you can
deactivate the Transmit Inhibit Mode and the radio returns to standard operation.
You can deactivate the mode by selecting MENU → Networks → TXI Mode → Deactivate, pressing
One-Touch button, or implicitly when initiating an Emergency Call.
NOTICE: RF Transmissions from the radio are prevented under the following conditions:
•
TXI Mode is activated.
•
Battery is removed.
•
The radio is turned off.
On entering or exiting the transmit inhibit mode, when the radio is camped on a cell, it sends a
specially designated SDS status message. This SDS message indicates to the SwMI that the radio is
entering or exiting transmit inhibit mode.
Mobility procedures that do not require the radio to send an uplink transmission are performed except
for cell reselection.
In transmit inhibit mode the radio joins group calls for any group that the radio is monitoring, but the
transmitting on that call is still prohibited.
The radio also displays any incoming SDS messages to the user. The missed call feature is active in
the transmit inhibit mode and allows checking what calls were missed. However, the radio attempts to
prevent call setup retransmission from being recorded as separate calls.
If you initiate an emergency call, the radio immediately leaves transmit inhibit mode and attempts to
start the emergency call if the radio is in service.
If the radio is turned off in the transmit inhibit mode, on turning on the radio asks whether to exit the
transmit inhibit mode. If you choose No, the radio turns off.
Selecting Talkgroups
From the home screen, use one of the following methods:
•
Press left or right NAVIGATION key. Press Select to confirm.
•
Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
•
Select Optns → TG by Folder. Select a folder and then a talkgroup name.
•
Rotate TALKGROUP KNOB until the required talkgroup name is displayed.
NOTICE: Your radio can have an access up to three levels of the folder structure.
Talkgroup Icon Selection
Table 9: Talkgroup Icon
Icon
Description
Displayed when the talkgroup is from a different network than the one currently selected.
Send Feedback
37
Chapter 2: Getting Started
Activating Talkgroup Scanning
When and where to use: If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → Scan → Scanning.
3 Select Select List and then a list name.
Your radio displays list name Selected.
4 Select Scanning → On.
Your radio is scanning on the predefined scan list.
Related Links
Scan on page 103
Broadcast Call
The Broadcast Group Call (also called Site Wide Call) is a high-priority group call from the console
operator (or dispatcher) to all users located at one or more sites. The radios are configured to monitor
a Broadcast Call, but you cannot talk back. The call can be received as a normal Broadcast Call or an
Emergency Broadcast Call. The Broadcast Call preempts an ongoing Group Call that has the same or
lower call priority.
Ambience Listening (AL) Call
This feature allows a dispatcher to make a special call that allows listening to the conversations and
background noises within the range of a particular radio’s microphone. The call is set up without any
indication to the affected radio, and any lower priority ongoing voice call or packet data transfer may be
preempted.
After accepting the call, the radio transmits in a simplex call without any action from or indication to the
user. The Ambience Listening Call automatically ends when you initiate any voice call, switch to
Emergency or TXI Mode, or send Emergency Alarm.
One-Touch Button Feature
The One-Touch Button feature allows for quick activation of functions by pressing and holding keys or
buttons assigned to those functions.
Table 10: One-Touch Button Features
Feature
Description
BSI Encryption Enabled/Disabled
Toggles BSI encryption feature.
Backlight Adjustment
Toggles the backlight on or off.
Bluetooth Discoverable Mode
Turns on/off the Discoverable Mode.
Change Audio Profile
Change to the specific audio profile.
Change Talkgroup
Changes the talkgroup to the programmed one by your service
provider.
Table continued…
38
Send Feedback
Chapter 2: Getting Started
Feature
Description
Change Talkgroup to the Previously
Selected Talkgroup
Changes the selected talkgroup of the radio to the talkgroup
(DMO or TMO) that was selected previously.
Covert Mode
Turns on/off the Covert Mode.
Direct Private Number Dialing
Dials a predefined private number.
Disconnect All Connected Bluetooth
Devices
Disconnects all Bluetooth devices connected to the radio.
Display OPTA
Displays the Operative Tactical Address (OPTA).
Display Time
Displays universal time on the home screen.
Sending of Double Push PTT (D-PTT)
Sends the D- PTT tone to the currently used talkgroup.
Enable/Disable Howling Suppression
Turns on/off Howling Suppression.
Flip Display
Rotates the display by 180 degrees.
GPS LIP Report
Sends a message with the radio’s GPS location to a dedicated
address.
Hi/Low Audio
Toggles high/low audio.
Initiate Call-Out Fallback Alert
Sends Call-Out Fallback Alert.
PABX Call
Initiates a PABX call to a predefined entry in the contact list.
Phone Call
Initiates a phone call to a predefined entry in the contact list.
Private Call
Initiates a private call (simplex or duplex) to a predefined entry
in the contact list or to the last group call originator.
RMS Mode (applicable only for * and #)
Toggles on/off RMS feature.
Rotary Switches Lock/Unlock
Locks/unlocks the Rotary Switches.
Add Bluetooth Device
Activates scanning for Bluetooth devices.
Bluetooth Indoor Location
Activates Bluetooth Indoor Location
Screen Saver Activation
Turns on/off the Screen Saver feature.
Scroll Audio Profiles
Scrolls through all available audio profiles.
Sending Predefined Message
Sends a predefined message to a dedicated address.
Sending Status
Sends a dedicated status message to a dedicated address.
Sending User Defined Message
Sends a user defined message to a dedicated address.
TMO / DMO Switch
Toggles between TMO and DMO modes.
TMO Talkgroup Scan
Turns on/off the Talkgroup Scan feature in TMO Mode.
Toggle Backlight Intensity
Regulates the backlight intensity.
Toggle RF Power Class
Toggles the RF Power Class between High and Normal.
Toggle the SIM Card End-to-End Encryption
Toggles the SIM Card End-to-End Encryption.
Transmit Inhibit Mode (TXI)
Turns on/off the Transmit Inhibit Mode.
Turn On/Off Bluetooth
Turns on/off Bluetooth.
Turn On/Off Repeater Mode
Turns on/off the Repeater Mode.
Table continued…
Send Feedback
39
Chapter 2: Getting Started
Feature
Description
Volume Down
•
Press to decrease the volume by one level.
•
Press and hold to continuously decrease the volume to its
minimum level.
•
Press to increase the volume by one level.
•
Press and hold to continuously increase the volume to its
maximum level.
Volume Up
Your service provider can assign one-touch functions only to the side buttons and keypad keys.
NOTICE: If the One-Touch Button feature is enabled, the One-Touch Dial is disabled. If no
feature is assigned to a button, your radio displays an Unassigned Button message.
Terminal Temporary Disable/Enable
Your radio is provided with a feature that allows your service provider to disable it temporarily in case it
is stolen. When your radio is disabled or is powered up in disabled state, it looks and acts like it is
turned off.
If your radio is found, your service provider can enable it again over the air. After your radio is enabled,
you may resume normal operation.
Terminal Permanent Disable
Your radio is provided with a feature that allows your service provider to disable it permanently in case
it is stolen or lost. When your radio is disabled permanently, it becomes inoperable. After a Permanent
Disable your service provider cannot enable your radio. It is recommended to Permanent Disable your
radio only when you do not expect to recover it. If it is recovered then a Permanent Disable radio can
be reactivated by returning it to Motorola.
NOTICE: This is a selling feature.
High/Low Audio Toggle
The user is able to switch from the external earpiece to the main speaker using One-Touch button and
is not required to disconnect the external earpiece or PHF.
The states of the routed audio are:
•
Speaker HIGH — indicates that audio is routed to the main speaker.
•
Speaker LOW — indicates that audio is routed to the earpiece or PHF earpiece, and not to the
main speaker.
Using High Audio
When and where to use: Use it when placing and receiving a Group, Phone and Private calls.
Procedure:
1 Hold your radio in a vertical position with its top microphone 5–10 centimeters away from your
mouth.
2 Speak into the top microphone and listen through the internal speaker.
Keep the antenna at least 2,5 centimeters from your head and body.
40
Send Feedback
Chapter 2: Getting Started
Using Low Audio
When and where to use: Use it when placing and receiving a Phone, PABX, and Duplex Private calls.
Procedure:
1 Hold your radio as you would a telephone.
2 Speak into the bottom microphone and listen through the earpiece.
Keep the antenna at least 2,5 centimeters from your head and body.
During the Call
During the call, label of the right SOFT key indicates the next possible change. Accessory default setup
is:
Table 11: During the Call
Soft Key Label
Audio Setting
Spkr
Audio goes to the main speaker (Speaker HIGH is displayed)
Erpce
Audio goes to the earpiece (Speaker LOW is displayed)
PHF
Audio goes to the Personal Hands Free (Speaker LOW is displayed)
Writing Text
Every time that you see text entry screen, refer to this section.
Related Links
Unlocking Your Radio on page 35
Selecting Text Entry Modes
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press MENU → Entry Mode.
2 Select one of the following:
•
Primary — for entering alphanumeric characters.
•
Numeric — for entering numbers only.
•
Symbol — for entering symbols only.
•
Secondary — for entering alphanumeric characters (this mode is optional and you have to
add it to the list). It is convenient when you use one language, and sometimes wish to switch
to another one.
NOTICE: In the text entry screen, you can also press # key repeatedly to toggle through
the entry modes.
Selecting Text Entry Methods and Languages
Prerequisites: Your radio displays the text entry screen.
Send Feedback
41
Chapter 2: Getting Started
Procedure:
1 Press MENU → Entry Setup.
2 Select one of the following:
•
TAP — Enter letters, numbers, and symbols by pressing an alphanumeric key one or more
times.
•
iTAP — Let the radio predict each word as you press an alphanumeric key.
NOTICE: You can use these methods in the languages programmed in the radio.
Text Entry Icons
In the text entry screen, icons tell you which text entry mode and method you are using. A character
counter displayed on the text entry icon, indicates the amount of characters that can be entered.
Press the # key to toggle through the text entry modes.
Table 12: Text Entry Screen Icons
Primary Icon
Secondary Icons
Description
TAP — no capitals
TAP — capitalise first letter only
TAP — all capitals
iTAP — no capitals
iTap — capitalise first letter only
iTap — all capitals
Numeric Icon
Description
Enter numbers.
Symbolic Icon
Description
Enter punctuation and symbols.
Keys Usage
List of keys and characters in Alphanumeric Mode (TAP/iTAP).
42
Send Feedback
Chapter 2: Getting Started
Table 13: Keys Usage
Key
Alphanumeric Mode (TAP/iTAP)
0 to 9 keys
Numeric Mode:
0 key
•
Press to enter digit at insertion point.
•
Press and hold any numeric key to enter
TAP alphanumeric mode.
•
To exit TAP alphanumeric mode, press and
hold any numeric key.
Press to cycle through single shift, caps lock,
and lower case.
1 key
2 key
Symbol Mode
+-×*/\[]=<>§#
.,?!01@’”-()/:_;+&%×*=<>€£$¥¤[]{}\~^¿¡§#
ABC2
@_\
abc2
3 key
DEF3
/,;
def3
4 key
GHI4
”&’
ghi4
5 key
JKL5
()[]{}
jkl5
6 key
MNO6
¿¡~
mno6
7 key
PQRS7
=<>
pqrs7
8 key
TUV8
€£$¥¤
tuv8
9 key
WXYZ9
#%*
wxyz9
Table 14: Other Keys
Key
Description
Any numeric key
•
In TAP press any key to reject word completion and continue with text entry
A new completion will be displayed, if available, after the time-out for TAP
expires.
•
Press and hold to enter Numeric mode from TAP or iTAP alphanumeric.
•
Press to insert a space.
•
In TAP press to dismiss a word completion and insert a space.
•
Enter a newly created word into the user dictionary.
* key
Table continued…
Send Feedback
43
Chapter 2: Getting Started
Key
Description
# key
•
Press and hold to enter a carriage return.
•
Press once to cycle through all entry modes (Symbol, Numeric, Primary,
and Secondary (if configured).
•
Press and hold to return to the default entry mode.
Select
Press to select the highlighted choice and place it in the main text area.
Delete
•
Press once to delete the last entered character.
•
Press and hold to clear the entire main text area.
•
In TAP press to reject word completion and scroll up.
•
In TAP press to change previously entered small letter to capital.
•
In TAP press to reject word completion and scroll within the text area.
•
In TAP press to change previously entered capital letter to small.
•
Press to navigate to the left. Press and hold to repeat.
•
In TAP, if a word completion is available, press to reject the completion.
•
Press to navigate to the right. Press and hold to repeat.
•
In TAP if a word completion is available, press to accept the word.
Up NAVIGATION key
Down NAVIGATION key
Left NAVIGATION key
Right NAVIGATION key
MENU
If a context-sensitive menu is active, opens the Context Sensitive Menu.
Writing in iTAP Alphanumeric
Prerequisites: Your radio displays the text entry screen.
When and where to use: It allows you to write quicker. For example, try to write David 232!
Procedure:
1 Press MENU → Entry Setup → Prim..
2 Select iTAPEnglish and press Back.
3 Press MENU → Entry Mode.
4 Select Primary.
5 Press 3 key.
The alternative row opens and shows D E F 3.
6 Continue entering the letters by pressing one key for each letter. Press 2, 8, 4, and 3 keys.
NOTICE: Automatic shift to upper case is used at the beginning of a message, after
punctuation followed by space, or for the first letter of a word created as a new contact
entry.
The alternative row highlights David.
7 Press * key.
8 Press 2 key and scroll the alternative row by pressing right NAVIGATION key to reach 2.
It automatically changes the entry mode to Numeric.
44
Send Feedback
Chapter 2: Getting Started
9 Press 3 and 2 keys.
10 Press and hold 1 key until 0 at the end changes to ..
The alternative row highlights 232..
11 Scroll the alternative row by pressing the right NAVIGATION key to reach the required symbol.
12 Press Select.
You have entered David 232!.
Writing in TAP Alphanumeric
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press MENU → Entry Setup → Seco..
2 Select TAPEnglish and press Back.
3 Press MENU → Entry Mode.
4 Select Secondary.
5 Press the key labeled with the desired character, once for the first character, twice for the
second, and so on.
Example: To enter letter s, press 7 key four times. To enter number 7, press the 7 key five
times. If you do not press a key for a few seconds, the character is accepted, and the cursor
moves to the next position.
Word Locking
Prerequisites: Your radio displays the text entry screen.
When and where to use: To add the words that are not in the dictionary.
Procedure:
1 Press MENU → Entry Setup.
2 Select iTAPEnglish.
3 Try to enter the word. Scroll the alternate line for a word option. Each option is successively
highlighted and partially locked.
4 Enter the second part of the word. The first part remains unchanged (locked). The newly entered
letters are highlighted and then locked while you scroll to the next word option.
5 Press * key. The word is placed in the text area with a space and automatically added to the
dictionary.
Adding Words to the Dictionary
Each language comes with its own dictionary. You can create words (including alphanumeric
abbreviations). Once you enter a word followed by space, it is automatically stored in the dictionary
and appears as a choice whenever you press the same key combination in the future.
Send Feedback
45
Chapter 2: Getting Started
Home Display Text Message
Your radio is provided with a feature that allows your service provider to send special text messages to
the display. The message stays on the home screen until a new message is received. Power cycle
your radio to replace the Home Display message to the predefined one.
46
Send Feedback
Modes
Chapter 3
Modes
This chapter contains information on available modes that the radio can operate in.
Using Networks
Procedure:
1 From the home screen, press the MENU key.
2 Select Networks.
3 Select one of the following:
•
Trunked Mode
•
Direct Mode
•
TXI Mode
Your radio switches to the selected mode.
Trunked Mode Operation
Trunked Mode Operation requires the switching and management infrastructure. This operation mode
enables various voice and data communication types (for example, group calls, short data service
messages) and access to the infrastructure-related features (for example, packet data).
Figure 2: Trunked Mode Operation
Entering TMO Mode
Procedure:
1 From the home screen, press Optns.
2 Select Trunked Mode.
Send Feedback
47
Chapter 3: Modes
Selecting Talkgroups
From the home screen, use one of the following methods:
•
Press left or right NAVIGATION key. Press Select to confirm.
•
Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
•
Select Optns → TG by Folder. Select a folder and then a talkgroup name.
•
Rotate TALKGROUP KNOB until the required talkgroup name is displayed.
NOTICE: Your radio can have an access up to three levels of the folder structure.
Making Group Calls in TMO
The Group Call is received by all members of the selected group who have their units turned on and
are in range.
Procedure:
1 Press and hold the PTT button.
2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the
PTT button to listen.
Receiving Group Calls in Idle
Procedure:
1 The radio receives a Group Call.
NOTICE: The incoming Group Call is signalled by a Receiving Group Call tone.
2 To respond, press and hold the PTT button.
Receiving Group Calls during Ongoing Group Calls
While in active Group Call, your radio receives a Group Call with a higher priority.
One of the following occurs:
•
Your radio is forced to end the current group call and automatically join the incoming one.
•
Your radio displays incoming group call screen with options:
Join — ends current Group Call and starts the incoming one.
End — cancels the incoming Group Call.
Dynamic Group Number Assignment (DGNA)
DGNA allows the network operator to dynamically manage talkgroups on your radio over the air
interface. Using DGNA, the network operator can:
•
Add talkgroups.
•
Attach or select newly added talkgroups.
•
Delete talkgroups.
•
Modify parameters of existing talkgroups.
All the above operations are performed by transmitting data to your radio.
48
Send Feedback
Chapter 3: Modes
DGNA Reception
When a DGNA message is received, your radio plays a tone and displays a message Talkgroup list
updated. If enabled by your service provider, your radio displays all added and deleted talkgroup list.
When your service provider deletes (de-assigns) the currently selected talkgroup, depending on the
settings, the radio can perform one of the following actions:
•
Enter the “No Group” state – the radio does not attach to any talkgroup automatically.
•
Attach to the last selected TMO talkgroup. If the last selected TMO talkgroup is not available (it was
deleted), the radio enters the “No Group” state.
•
Attach to a default talkgroup configured by your service provider. If the default talkgroup is not
available (it was deleted), the radio enters the “No Group” state.
At each talkgroup change, an appropriate notification is shown on the display.
If the DGNA message is received to delete all talkgroups, your radio displays All Talkgroups Deleted.
To exit the DGNA display, you can use the BackSOFT key or the END key.
DGNA Auto Select Group
If the DGNA Auto Select is configured, whenever your radio receives a DGNA, it switches to the added
talkgroup.
DGNA Auto Reselect Group
If the DGNA Auto Reselect is configured, whenever a talkgroup assigned by the network operator via
DGNA is deassigned without the user action, the radio returns to the previously selected group.
Viewing DGNA Talkgroups
Prerequisites: Your radio receives the DGNA message.
Procedure:
1 To view the added talkgroups details press View.
2 Scroll through the list to select required talkgroup.
3 To select the DGNA group, press Attach.
Broadcast Calls Initiated by Users
This feature allows you to make a Broadcast Call from the radio that is initiated on the predefined
talkgroup. Your service provider predefines the alias and the priority of the Broadcast Call.
NOTICE: If the type of the encryption is defined by the SIM Card, the Broadcast Call is always
clear. Otherwise if the radio uses other encryption service the type of the encryption used for
that Call is up to the encryption settings of that service.
NOTICE: This feature is not supported on the Dimetra infrastructure.
Initializing Broadcast Calls
Procedure:
1 From the home screen, press the MENU key.
Send Feedback
49
Chapter 3: Modes
2 Select Services → Broadcast.
Your radio displays the predefined alias and the Broadcast Call icon.
3 To start the call press the PTT button.
Phone and PABX Calls
The Phone Call allows you to call a landline telephone number or a cellular mobile phone number. The
Private Automatic Branch Exchange (PABX) Call allows you to call local (office) extension numbers.
Private Call
The Private Call, also called point-to-point, or individual call, enables calling between two individuals.
No other radio can hear the conversation. This call type can be carried out in two ways:
•
Duplex call (if the system allows), in TMO Mode. Both parties can speak at the same time.
•
Simplex call, in TMO or DMO Mode. Only one party can speak at a time.
When a DMO Private Call takes place, radios not involved in this call receive the channel busy
indication. The radios are identified using its radio numbers.
Related Links
Emergency Individual Calls (Private or MS-ISDN) on page 58
MS-ISDN on page 119
Making Private Calls
Procedure:
1 From the home screen, enter a number.
2 If Private is not the first type of call presented, press Ctype repeatedly to select it.
3 When you are in the following mode:
a TMO — For simplex calls, press and release the PTT button. You hear a ringing tone.
Otherwise, press and hold the PTT button. Wait for the talk permit tone before talking, and
release the PTT button to listen. For duplex calls, press and release the SEND key. You hear
a ringing tone.
b DMO — Only simplex calls are available. Press and hold the PTT button. Wait for the talk
permit tone before talking, and release the PTT button to listen.
4 To end the call, press the END key.
Assistance Call
This feature allows you make a private call to ask for assistance during normal and non-critical
situations.
NOTICE: Your service provider can configure the number, priority, and the type of the call
(simplex or duplex).
Call Modification
Call Modification is a feature that allows your service provider to modify the call in order to optimize it
and adjust to a current situation.
Modification can cover:
50
Send Feedback
Chapter 3: Modes
•
Call priority – modified during call setup.
•
Call type – modified during call setup.
•
Call encryption – modified during an ongoing call (but not in the transmission phase).
When the call is modified, your radio displays Call Modified message.
When a recently modified call requires the PTT button to transmit, your radio displays Call
ModifiedUse PTT.
All modifications are made by your service provider and the radio only follows them. You have no
influence on ongoing call modifications.
When call priority is changed to emergency:
•
The display indicates that an Emergency Group Call has been received.
•
The radio plays a special audio alert.
NOTICE: If a Group Call is modified into an Emergency Group Call, no emergency related
features are triggered.
If call modification requested by your service provider cannot be followed by the radio (due to its
settings), the radio rejects it and displays Service Not Available message.
Local Site Trunking
This mode is also called as Fallback Mode and it allows more than one radio from the same site to
communicate when the link between the site and the network central controller fails. Entering and
exiting Local Site Trunking (that is, returning to System Wide Services) is done automatically. In this
mode some services are unavailable.
NOTICE: Your service provider can disable this mode.
Entering Local Site Trunking
When your radio receives a Local Site Trunking indication from the system, the following occurs:
•
Your radio plays an Entering Local Site Trunking tone.
•
Display shows the Local Area Service message.
•
Display icons and soft keys turn olive.
NOTICE: Noticeable only on the color display.
•
Any call in progress is dropped upon entering Local Site Trunking Mode.
If configured by your service provider, this message/alert is periodically repeated to remind you that
your radio is still operating in Local Site Trunking Mode. The following features are available:
•
Registration
•
Attachment
•
Group Call
•
Emergency Call
•
Emergency Alarm
Send Feedback
51
Chapter 3: Modes
Exiting Local Site Trunking
When the link with the central network controller is reestablished, your radio exits Local Site Trunking,
and the following occurs:
•
Your radio plays an Exiting Local Site Trunking tone.
•
Any call in progress during Local Site Trunking is dropped.
•
Display icons and soft keys turn blue.
Direct Mode Operation
Direct Mode Operation is a mode of simplex operation where radios communicate directly.
Figure 3: Direct Mode Operation
Entering DMO Mode
To enter the DMO Mode:
•
From the home screen, press the MENU key. Select Networks → Direct Mode.
•
From the home screen, select Optns → Direct Mode.
Selecting Talkgroups
From the home screen, use one of the following methods:
•
Press left or right NAVIGATION key. Press Select to confirm.
•
Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
•
Select Optns → TG by Folder. Select a folder and then a talkgroup name.
•
Rotate TALKGROUP KNOB until the required talkgroup name is displayed.
NOTICE: Your radio can have an access up to three levels of the folder structure.
52
Send Feedback
Chapter 3: Modes
Making Group Calls in DMO
The Group Call is received by all members of the selected group who have their units turned on and
are in range.
Procedure:
1 Press and hold the PTT button.
2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the
PTT button to listen.
Receiving Group Calls in Idle
Procedure:
1 The radio receives a Group Call.
NOTICE: The incoming Group Call is signalled by a Receiving Group Call tone.
2 To respond, press and hold the PTT button.
Private Call
The Private Call, also called point-to-point, or individual call, enables calling between two individuals.
No other radio can hear the conversation. This call type can be carried out in two ways:
•
Duplex call (if the system allows), in TMO Mode. Both parties can speak at the same time.
•
Simplex call, in TMO or DMO Mode. Only one party can speak at a time.
When a DMO Private Call takes place, radios not involved in this call receive the channel busy
indication. The radios are identified using its radio numbers.
Related Links
Emergency Individual Calls (Private or MS-ISDN) on page 58
MS-ISDN on page 119
Making Private Calls
Procedure:
1 From the home screen, enter a number.
2 If Private is not the first type of call presented, press Ctype repeatedly to select it.
3 When you are in the following mode:
a TMO — For simplex calls, press and release the PTT button. You hear a ringing tone.
Otherwise, press and hold the PTT button. Wait for the talk permit tone before talking, and
release the PTT button to listen. For duplex calls, press and release the SEND key. You hear
a ringing tone.
b DMO — Only simplex calls are available. Press and hold the PTT button. Wait for the talk
permit tone before talking, and release the PTT button to listen.
4 To end the call, press the END key.
Send Feedback
53
Chapter 3: Modes
DMO Private Priority Call
The service provider may assign Pre-emptive Priority to outgoing DMO Private Calls. If this is the case,
DMO Private Calls from this radio preempt any ongoing calls (with the exception of emergency calls or
ongoing Pre-emptive Priority Private Calls) on the receiving radio, which then displays Callpreempted.
Talkgroup for Individual Calls
Talkgroup for Individual Calls is a talkgroup that operates on a separate frequency allocated for
individual (private) calls only. Using this talkgroup optimizes frequency resources and helps not to
block other talkgroups. The only supported call types are: private calls and emergency calls (both
private and group). Use this talkgroup each time you need to make a private call.
When you select a Talkgroup for Individual Calls, your radio is not able to receive or initiate any group
or broadcast calls with priority lower than Emergency.
When you have selected a Talkgroup for Individual Calls and press the PTT button to start a Group
Call, the radio:
•
Rejects the call
•
Plays a tone
•
Displays the Individual Calls Only message
Communication through Repeaters
Radios that are out of range and cannot communicate directly one with another in DMO Mode can do it
through the repeater. The repeater is a radio that repeats all communication on a chosen channel, and
as a result increases radios’ DMO range.
DMO
DMO
When the radio connects to a repeater, it plays a tone, displays the Repeater available message, and
shows an appropriate icon. When the radio looses connection with the repeater, it plays a tone,
displays the Repeater not available message, and the repeater icon is blinking.
Communication through Gateways
Gateway provides connectivity between radios operating in DMO Mode and the TETRA network, so
that the DMO radios can communicate with the TMO radios.
54
Send Feedback
Chapter 3: Modes
TMO
TMO
DMO
When the radio connects to a gateway, it plays a tone, displays the Gateway available message and
shows an appropriate icon. When the radio looses connection with the gateway, it plays a tone,
displays the Gateway not available message, and the gateway icon is blinking.
Selecting DMO Group Call Options
When and where to use: Helps to communicate with other radio users on the same talkgroup through
the Gateway or Repeater.
Procedure:
1 From the home screen, press Optns.
2 Press Config.
3 Select one of the following:
•
MS - MS — Your radio can communicate only with other radios within its range.
•
Gateway — Your radio uses a gateway to communicate with the infrastructure.
•
Automatic — Your radio uses the first available gateway for that talkgroup.
•
Specific — Your radio uses only the Gateway with the specified Gateway address for that
talkgroup. If your radio displays Selected Gateway:None, press Edit to enter the current
gateway address.
•
Repeater — Uses the first available repeater for that talkgroup.
•
GW + Rep — Uses the first available gateway or repeater for that talkgroup.
•
Automatic — Uses the first available gateway for that talkgroup.
•
Specific — Uses only the Gateway with the specified Gateway address for that talkgroup.
If your radio displays Selected Gateway:None, press Edit to enter the current Gateway
address.
NOTICE: When the Gateway and the Repeater cannot be communicated even
though a talkgroup to use them is configured, the radio attempts the direct MS-MS
communication.
When your radio detects the appropriate Gateway and/or the Repeater, the Gateway and/or Repeater
icons turns solid, respectively.
Send Feedback
55
Chapter 3: Modes
Transmit Inhibit Mode
The Transmit Inhibit Mode is a mode in which the radio sends no radio transmissions. It is
recommended to activate the mode in RF sensitive areas, for example hospitals, airplanes, where
safety can be jeopardized due to transmission radiation.
To activate, select MENU → Networks → TXI Mode → Activate.
In this mode, the radio does not transmit under any circumstances except for the Emergency Calls. All
the functions and keys which cause transmission, for example registration to the network, changing
talkgroup or folder, sending SDS messages, or pressing the PTT button are disabled. Any transmission
trial causes the radio to display Not Allowed In TXI Mode notification and to play a tone.
Your radio can still receive:
•
Group calls.
•
Messages — stored in the Inbox.
•
Private call attempts — stored in the Missed Calls list, without the option to respond.
When no danger to safety exists anymore (for example, you leave the RF sensitive area), you can
deactivate the Transmit Inhibit Mode and the radio returns to standard operation.
You can deactivate the mode by selecting MENU → Networks → TXI Mode → Deactivate, pressing
One-Touch button, or implicitly when initiating an Emergency Call.
NOTICE: RF Transmissions from the radio are prevented under the following conditions:
•
TXI Mode is activated.
•
Battery is removed.
•
The radio is turned off.
On entering or exiting the transmit inhibit mode, when the radio is camped on a cell, it sends a
specially designated SDS status message. This SDS message indicates to the SwMI that the radio is
entering or exiting transmit inhibit mode.
Mobility procedures that do not require the radio to send an uplink transmission are performed except
for cell reselection.
In transmit inhibit mode the radio joins group calls for any group that the radio is monitoring, but the
transmitting on that call is still prohibited.
The radio also displays any incoming SDS messages to the user. The missed call feature is active in
the transmit inhibit mode and allows checking what calls were missed. However, the radio attempts to
prevent call setup retransmission from being recorded as separate calls.
If you initiate an emergency call, the radio immediately leaves transmit inhibit mode and attempts to
start the emergency call if the radio is in service.
If the radio is turned off in the transmit inhibit mode, on turning on the radio asks whether to exit the
transmit inhibit mode. If you choose No, the radio turns off.
Emergency Operations
Emergency Operations are used in critical situations.
Pressing and holding the EMERGENCY button, or entering the Emergency Number and pressing the
SEND key, activates one or more services (depending on your service provider settings):
•
Emergency Alarm
•
SDS Status
•
Silent Emergency
•
Hot Microphone operation
56
Send Feedback
Chapter 3: Modes
•
Emergency Individual Call (Private or MS-ISDN)
•
GPS location information
NOTICE: It is possible to turn on the radio by pressing the EMERGENCY button. Depending on
the service provider settings, the radio can start Emergency Operations automatically. If the
radio is PIN-protected (except for SIM PIN), Emergency Operations will bypass the PIN lock for
the duration of the Emergency Operations.
When starting Emergency Operations, any ongoing voice call is aborted or cleared down, and any
packet data transfer in progress is aborted. However, the session is kept open.
During Emergency Operations, the radio rejects phone, PABX, and private calls, and does not monitor
the talkgroups in the selected scan list.
To terminate Emergency Operations, press the rightSOFT key.
Emergency Group Call
The Emergency Group Call has the highest communication priority that means it is the pre-emptive
kind of call. Emergency Group Call is available in both TMO and DMO. During Emergency Operations,
Emergency Group Call can be started by pressing pressing the EMERGENCY button. The radio can also
support Hot Microphone operation, which allows the Emergency Call to be conducted without pressing
the PTT button.
If the radio receives an incoming group call with emergency priority, the display shows that an
emergency call has been received, and a special audio alert is played.
An emergency group call can be configured as:
•
A non-tactical call – initiated on a talkgroup preprogrammed by your service provider. When in nontactical emergency mode, you cannot switch talkgroups.
•
A tactical call – initiated on the currently selected talkgroup.
In TMO, if the radio enters Emergency Operations while the Emergency Broadcast Call is active, the
radio continues on the call without initiating any calls and sends the Emergency Alarm.
When the Emergency Group Call you participate in terminates, your radio can behave in several ways,
depending on your service provider settings:
•
If you are the call initiator, the radio can either stay in the Emergency Mode, or return to TMO.
•
If you are not the call initiator, the radio always returns to TMO.
Making Emergency Group Calls
Prerequisites: Ensure that your radio is in Emergency Mode.
Procedure:
1 Press and hold the PTT button.
2 Wait for the talk permit tone (if configured) and talk.
3 Release the PTT button to listen.
NOTICE: It is possible to cancel making an emergency group call in TMO. To do this,
perform one of the following actions before the talk permit is granted (depending on your
service provider settings):
•
Release the PTT button.
•
Press the END key (default).
When the call is canceled, your radio displays Call Cancelled message (if configured by
your service provider).
Send Feedback
57
Chapter 3: Modes
Receiving Emergency Group Calls
The radio receives an Emergency Group Call from a selected pre-programmed group. An incoming call
is indicated by an appropriate tone, status icon, and red color of the display.
Non-Tactical Emergency
In Non-Tactical Emergency, the radio switches to a designated Emergency talkgroup when starting
Emergency Operations. This talkgroup is used for the complete duration of the Emergency Operations
(you cannot change the talkgroup).
In TMO, it is possible to configure the radio to make Emergency Non-Tactical Group Calls without
sending attachment. If this is set, the radio assumes implicit attachment after receiving a temporary
address.
In DMO, the Non-Tactical Emergency proceeds on the same frequency as the previously selected
talkgroup. The service provider can designate any ITSI address to be used for Emergency Operations,
(this can be an Open Group – broadcast address).
After exiting from Non-Tactical Emergency, the radio goes back to the previously selected talkgroup.
Emergency Individual Calls (Private or MS-ISDN)
The Emergency Individual Calls are Simplex or Duplex Calls with emergency priority. On pressing the
EMERGENCY button, the radio initiates an Individual Call to the provisioned address (private or MSISDN). During this kind of call all user indications are unavailable and all other services are rejected.
Emergency Operation ends as soon as the Emergency Individual Call is ended.
Related Links
Private Call on page 50
MS-ISDN on page 119
Emergency Alarm
The Emergency Alarm is a special status message sent to the infrastructure while starting the
Emergency Operations. The radio can wait for infrastructure acknowledgment for this alarm and
attempts retries.
Each time the radio enters the Emergency Operation, it sends the Emergency Alarm. When the
Emergency Alarm is sent successfully, the respective audible tone sounds.
In addition, once the radio is in the Emergency Operation on pressing the EMERGENCY button, an
additional emergency alarm is sent (exception: during Hot Microphone transmission).
The message can be dispatched both in TMO and DMO.
Emergency SDS Status
Radio sends a status message with a preprogrammed value to the destination address set by your
service provider. Emergency SDS Status is available in TMO only. If no status acknowledgment or
negative acknowledgment is received, the radio retries sending the message. Status is not resend if
Emergency Alarm or Hot Microphone is configured.
Emergency Hot Microphone
The Hot Microphone allows you to talk without pressing the PTT button during Emergency Operations.
The transmission continues for a provisioned amount of time. Pressing the PTT button before the Hot
Microphone time expires ends the Hot Microphone operation. Then normal PTT operation in
58
Send Feedback
Chapter 3: Modes
Emergency group call takes over (that is, the transmission is ongoing for the time the PTT button is
held).
Subsequent EMERGENCY button presses during the Emergency Operation restarts the Hot
Microphone transmission.
If a talk permit is granted to another member of the group, the Emergency Call received tone is played.
If configured, the radio automatically attempts to get talk permit again.
Pressing EndSOFT key or END key ends the Hot Microphone operation.
Alternating Hot Microphone
The Alternating Hot Microphone is an enhancement of the Hot Microphone. After activation, the radio
alternately enters transmission phases (your microphone is active) and reception phases (you can only
listen) for an amount of time precisely determined by your service provider.
If this feature is enabled, you can initiate the Alternating Hot Microphone by pressing the EMERGENCY
button. If you want to finish earlier or skip the transmission phase, press the END key.
The Alternating Hot Microphone terminates when one of the following conditions is met:
•
The radio exits the Emergency Mode.
•
The Alternating Hot Microphone timer expires.
•
The PTT button is pressed.
•
The right SOFT key is pressed (only during the transmission phase).
NOTICE: When the radio goes out of the service, it enters the reception phase and the
Alternating Hot Microphone is on hold. When the radio is back to the service, the Hot
Microphone transmission and the Alternating Hot Microphone resume.
NOTICE: When you are in the Emergency Mode, pressing the EMERGENCY button restarts the
Alternating Hot Microphone.
Silent Emergency Mode
The Silent Emergency Mode is a type of emergency services that provides no audible indications and
no keypad tones at the entrance. All the display indications are as in the home mode. However, the
radio cannot use any services except for:
•
Receiving Ambience Listening
•
Sending Silent Emergency Alarms
•
Sending GPS location reports
NOTICE: If you try to activate any other feature, it is blocked.
If the Silent Emergency feature is enabled, the radio enters Silent Emergency Mode on pressing the
EMERGENCY button. After entering this Mode the radio stays in TMO or switches to it, depending on
the actual state. Once in TMO, the radio sends Silent Emergency Alarm.
NOTICE: If the radio is in a private or group call, the radio waits until the call ends and then
enters the Silent Emergency Mode.
The radio keeps re-sending the alarm until successful sending is confirmed. After the alarm is
successfully delivered, the radio stays in Silent Emergency Mode and waits for the Ambience
Listening.
Your radio exits the Silent Emergency Mode, under the following conditions:
•
Press MENU and then # key within 3 seconds.
Send Feedback
59
Chapter 3: Modes
•
Press MENU simultaneously with right NAVIGATION key.
•
Press both SOFT keys simultaneously.
•
No success in sending the Silent Emergency Alarm and the maximum number of retries has been
reached.
•
The control room terminates the Silent Ambience Listening.
•
The Ambience Listening is disconnected due to another reason.
If you turn off the radio in the Silent Emergency Mode, the radio switches to pseudo power off state. In
this state, the radio appears to be turned off. However, the radio is still on and in the Silent Emergency
Mode. On turning the radio on during the pseudo power off state, the radio acts as during turning on
and still is in the Silent Emergency Mode.
Invisible Emergency
It is possible for the service provider to disable visual and audible indications of performing Emergency
Operations on the radio. The purpose of this feature is to hide the fact of using Emergency Operations
in a critical situation (e.g. direct attack on the user) and thus to provide additional layer of safety.
Disaster Alert
Disaster Alert call is a broadcast emergency call initiated by the radio, with emergency pre-emptive
priority that everyone in a broadcast area can hear. This feature is specifically designed for
catastrophic situations, such as earthquakes, and has the highest priority over other calls. All radios
under Disaster Alert display emergency notification on their screens. The alert message, its duration
and destination talkgroup can be configured in the codeplug.
In order to initiate Disaster Alert, switch the radio to Disaster Alert mode and press PTT button. When
the call ends, the radio will exit the Disaster Alert state.
During Disaster Alert, other functionality is impacted:
•
When Disaster Alert begins, any other ongoing services are terminated.
•
No other services can interrupt this type of call.
•
Hot Mic functionality cannot be used.
•
Speech can only be in Clear mode, even if any of the encryption services are enabled. The only
exception is E2E Encryption.
NOTICE: Not all infrastructures support this feature. Please consult with your service provider
before enabling this feature.
Initializing Disaster Alert Calls
Procedure:
1 From the home screen, press the MENU key.
2 Select Services → Disaster Alert.
Your radio enters Disaster Alert Mode and it displays Disaster Alert icon.
3 To start the call press PTT.
Your radio displays Disaster AlertIn Use.
Exiting Emergency Operations
Prerequisites: Make sure that your radio is engaged in Emergency Operations.
60
Send Feedback
Chapter 3: Modes
Procedure:
1 If your radio screen displays Emergency Mic On, press End.
2 Press and hold Exit.
NOTICE: If an Emergency Operation was triggered by Emergency number (not by
EMERGENCY button), you can press the END key to exit the Emergency Operation.
3 If your radio displays Do you want to exit?, press Yes to exit.
Your radio exits Emergency Operations.
Repeater Mode
The Repeater Mode provides repeater connectivity between radios operating in the DMO Mode.
Figure 4: Repeater Mode Operation
DMO
DMO
A DMO repeater is used to extend the DMO range by retransmitting received information from one
radio to another. It retransmits group calls, private calls and data on a given frequency.
The repeater sends presence signal periodically on a free channel to allow other radios to synchronize
on a given frequency.
Only the radios on the same talkgroup can communicate with each other through the repeater.
NOTICE: This is a selling feature.
Send Feedback
61
This page intentionally left blank.
GPS Location Service
Chapter 4
GPS Location Service
The GPS Location Service feature uses information from Global Positioning System (GPS) satellites
orbiting the Earth to determine the approximate geographical location of your radio.
The GPS Location Service availability, accuracy, and the position calculation time vary depending on
the environment in which you use the radio. The GPS Location Service can assist your dispatcher or
colleagues in many ways such as more efficient deployment of resources or locating your radio when
you trigger your emergency service.
The radio can display the location information directly on the screen or send it over the air to your
dispatcher to display it in the control center. Check your radio configuration details with your service
provider.
IMPORTANT: Where the signals from satellites are not available, the GPS Location Service
does not work. This situation usually happens when your radio cannot establish a view of a
wide area of open sky, for example, when the GPS antenna is covered or facing the ground.
Such situations include being:
•
In underground locations
•
Inside buildings, trains, or other covered vehicles
•
Under any other metal or concrete roof or structure
•
Near a powerful radio or television tower
•
In extreme temperature outside the operating limits of your radio
Even if your location information can be calculated in such situations, it may take longer to do so.
Therefore, in any emergency situation, always report your location to your dispatcher. Where adequate
signals from multiple satellites are available, your GPS Location Service feature provides a location,
most probably near to your actual location.
The radio can be triggered to send Location Reports in various circumstances, for example:
•
Upon a request
•
Entering Emergency Mode
•
At specified time intervals
•
At specified distance intervals
The Location Reports can be sent both in TMO and DMO by using:
•
SDS messages
•
Packet Data
The radio can be configured to give audio-visual notifications upon sending the Location Reports.
Depending on the radio settings, viewing the radio position and the status of the visible satellites is
available. The position may consist of longitude and latitude, UK, or Irish grid coordinates.
NOTICE: This is a selling feature.
Send Feedback
63
Chapter 4: GPS Location Service
Related Links
Location on page 111
Enhancing GPS Performance
Sometimes the GPS feature is unable to complete a location calculation successfully. You hear an
audible tone indicating that your radio cannot see the satellites.
To maximize the ability of your radio to determine a location fix please note the following guidelines:
•
Stay in the open — The GPS feature works best where there is nothing between your radio and a
large amount of open sky. If possible, go outside, away from tall buildings and foliage. While the
performance in a building is improved by moving closer to windows, glass with certain sun shielding
films may block satellite signals.
•
Position your radio to enhance reception — Signals from GPS satellites are transmitted to your
GPS antenna, which is in your radio antenna. Hold your radio away from your body, giving the
antenna clear access to satellite signals. Do not cover the antenna area with your fingers or
anything else.
•
Stand still — If possible, stand still until your radio is finished determining your location. Moving your
radio at a walking pace while your radio is calculating your approximate location may substantially
decrease GPS performance.
Enabling GPS
Procedure:
1 From the home screen, press the MENU key.
2 Select Location → Interface.
3 Select On.
NOTICE: Your service provider can enable this feature.
GPS Icon
When GPS is enabled, the following icon is displayed in the status icon area:
Depending on the
current GPS state, the icon can be solid – GPS has a fix, or blinking – GPS is searching for a fix. The
blinking GPS icon can be disabled/enabled by your service provider.
GPS Different Location Displays
Table 15: Different Location Displays
Latitude / Longitude
UK Coordinates
Irish Coordinates
Time
Time
Time
Latitude
2–Letter Code
1–Letter Code
Longitude
Easting and Northing Coordinate
Easting and Northing Coordinate
Altitude
Altitude
Altitude
Satellites
Satellites
Satellites
64
Send Feedback
Chapter 4: GPS Location Service
•
Time — indicates when the last time the location was calculated. The time is provided in Universal
Time Coordinated.
•
Letter Code — grid zone or square on the map for different coordinate standard
•
Latitude — expressed in degrees, minutes, and seconds.
•
Longitude — expressed in degrees, minutes, and seconds.
•
Number of satellites — used to calculate the location. In general, more satellites make for better
accuracy. The maximum is 12 satellites.
•
Easting — refers to the eastward-measured distance expressed in meters.
•
Northing — refers to the northward-measured distance expressed in meters.
NOTICE: Skipping each digit of easting and northing coordinates decreases the accuracy by
the factor of 10.
Viewing Your Position
Procedure:
1 From the home screen, press the MENU key.
2 Select Location → Position.
3 Scroll to view the results about the last time your location was calculated.
NOTICE: To refresh your position:
•
Select Position — the radio refreshes its position automatically
•
Press Refresh
Changing GPS Accuracy
Procedure:
1 From the home screen, press the MENU key.
2 Select Location → Accuracy.
3 Select one of the following:
•
Medium (default) — Power consumption optimization is combined with less position
accuracy.
•
High – Better position accuracy is combined with less power consumption optimization.
NOTICE: If connected to an external charging device, the radio automatically enters the
High mode.
GPS – Things to Keep in Mind
Where adequate signals from multiple satellites are not available, the GPS feature of your radio does
not work. Such situations include but are not limited to:
•
In underground locations
•
Inside of buildings, trains, or other covered vehicles
•
Under any other metal or concrete roof or structure
•
Near a powerful radio or television tower
•
When your GPS antenna is covered (for example, by your hand or other object) or facing the
ground
Send Feedback
65
Chapter 4: GPS Location Service
•
In temperature extremes outside the operating limits of your radio
Even where location information can be calculated in such situations, it may take longer to do so.
Therefore, in any emergency situation, confirm your location with your dispatcher.
Furthermore, please note that even where adequate signals from multiple satellites are available, your
GPS feature provides only an approximate location, often within 20–100 meters from your actual
location.
66
Send Feedback
Main Menu
Chapter 5
Main Menu
This chapter contains information on items in the main menu.
You can enter the menu items during a call. If you are viewing a menu when a new call starts, the radio
exits the menu.
IMPORTANT: Some menu items are model specific and may not be activated or available on
your radio.
Scrolling through the Menu
Procedure:
1 From the home screen, press the MENU key.
2 Scroll to the required item by pressing NAVIGATION keys. Press the SOFT key assigned as Select
or right NAVIGATION key to select.
If the menu item contains a further set of menu items, repeat step 2.
NOTICE: You can use shortcuts to access frequently used items.
Menu Icons
The following icons make it easy to identify the menu items at first glance.
Table 16: Menu Icons
Menu Icon
Description
Main Menu Items/Context Sensitive Menu
It is assigned to MENU when the main menu items / context-sensitive menu are active.
Messages
Send status messages,
Send text messages (free text or according to user defined or predefined templates),
Received messages in Inbox.
Contacts
Add, search, edit, or erase entries in the contact list.
Bluetooth
Allows you to manage Bluetooth settings.
Browser
Starts the WAP browser.
Table continued…
Send Feedback
67
Chapter 5: Main Menu
Menu Icon
Description
Security
Lets you turn on/off and verify security features, and change passwords.
Setup
Allows you to customize your radio.
Group Setup
Contains additional menu items for Scanning Talkgroups features.
My Info
Displays information about your radio and its numbers.
Recent Calls
Contains a list of recent calls.
Shortcuts
Allows you to view and manage shortcuts to menu items.
RUI
Allows you to log in and log out of the radio.
Networks
Allows you to select a network.
Location
Displays location of your radio.
Packet Data
Allows you to send data from your radio to other devices.
Crypto Menu
Allows you to manage SIM Card End-to-End Encryption.
Services
Allows you to manage Broadcast, Assistance and Disaster Calls.
Messages
This feature allows you to send and receive text messages. A message can contain up to 1000
characters, depending on your service provider settings.
Pressing the PTT button when a message is highlighted can cause one of the following actions,
depending on your service provider settings:
•
The radio ignores the PTT button request.
•
The radio starts a Private Call with the message sender.
•
The radio starts a Group Call on a currently selected talkgroup.
New Message
This menu item allows you to create a new message.
68
Send Feedback
Chapter 5: Main Menu
NOTICE: While editing a text, Status Icons change their appearance and only four of them are
displayed: Tower, Signal Strength, Emergency, and Battery.
Sending Messages to Private/Phone
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → New Message.
3 Enter your message and press Send.
4 If needed, select Private/Phone.
5 Enter recipient number or press abc to choose it from your contacts.
NOTICE:
For Private target selection, you can enter either Individual Short Subscriber Identity
(ISSI) or Group Short Subscriber Identity (GSSI) of the recipient.
ISSI – a unique, individual ID assigned for each radio.
GSSI – in Dimetra called Group ID or Talkgroup ID.
6 Press Send, or SEND key, or the PTT button.
Sending Messages to Groups
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → New Message.
3 Type your message and press Send.
4 If needed, select Group.
5 Select a group to send the message.
Sending Store and Forward Messages
Prerequisites: Your service provider enables the Store and Forward feature.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → New Message.
3 Press MENU key and select Message Setup → On/Offline users.
4 Enter your message and press Send.
5 If asked for the Target selection, select one of the following:
•
Private – enter the private number or press abc to choose the destination number from the
contact list.
Send Feedback
69
Chapter 5: Main Menu
•
Phone – enter the phone number or press abc to choose the destination number from the
contact list.
NOTICE: Your service provider can enable to send a Store and Forward message to a
talkgroup.
6 Select Send, or press SEND key or PTT button.
Delivery Report
Delivery Report is an acknowledgment that the radio can request upon sending a message to an
individual recipient. You can define what type of Delivery Report your radio requests, or turn on/off this
feature.
If the Delivery Report is received shortly after the message was sent, the radio:
•
Displays a pop-up with one of the following messages:
Message Sent – if no Delivery Report is requested (and when a Store and Forward message
has been received at the Store and Forward server)
Message Delivered – if the Delivery Report is requested and the message has been received
by the target radio
Message Read
– if the Consumed Delivery Report is requested and the message is opened on the target radio
•
Message Failed – if the Delivery Report is requested and the message has not been received
by the target radio within a defined time period
Saves the Delivery Report in Outbox along with a copy of the message.
If the Delivery Report is received after a longer period of time, the radio:
•
Saves the Delivery Report in Outbox along with a copy of the message.
•
If Delivery Report Notifications functionality is configured by your service provider, the radio also:
Temporarily saves a Delivery Report message in Inbox. The notification disappears after it is
read.
Displays New Message icon.
Displays New Delivery Status notification screen (if possible).
Viewing Delivery Reports
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Find a required message and select Read.
4 Press MENU key.
5 Select Delivery Status.
Configuring Delivery Reports
Prerequisites: Your service provider enabled the delivery report configuration.
Procedure:
1 From the home screen, press the MENU key.
70
Send Feedback
Chapter 5: Main Menu
2 Select Messages → New Message.
3 Press MENU key and select Delivery Report.
4 Select one of the following:
•
None — the radio does not request any delivery report.
•
Received — the radio requests reports on your messages that were received.
•
Consumed — the radio requests reports on your messages that were read.
•
Both — the radio requests reports on your messages that were received and read.
Inbox
It contains up to 100 new or old incoming messages.
Table 17: Inbox Icons
Icon
Description
Unread (New) Message
Read (Old) Message
Sender Information in Message View — name or number
Time and Date Stamp in Message View — arrival time and date
Delivery Status Received — delivery status for Store & Forward messages
Messages sub-menu indicates the number of the messages. If the indication is for example 2/4, it
means that two unread and four read messages are in the Inbox.
Entering the Inbox
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
NOTICE: The status (if any) of the list is displayed for a few seconds:
•
No New or Old Messages — The screen returns to the previous display within a few
seconds.
•
Inbox Full — Select Ok.
Receiving New Messages
Procedure:
1 New message received.
Your radio displays an animation and plays a New Mail Received tone.
2 Select one of the following:
•
Read — opens the entire message.
Send Feedback
71
Chapter 5: Main Menu
•
Back — dismisses the message. You can access the message later from the Inbox.
Using Submenus in the Inbox and the Outbox
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox or Outbox.
3 Highlight the required message and press MENU key.
4 Select one of the following:
•
Store — Saves a message as a template. Change the default template name and press Ok.
•
Delete — Deletes the selected message. Press Yes to confirm.
•
Delete All — Deletes all the messages in the Inbox/Outbox. Press Yes to confirm.
•
Reply (only for Inbox) — Invokes the edit screen with the old message as default text and
the message originator as a recipient. After editing, press Send, the PTT button, or the SEND
key to send.
•
Resend (only for Outbox) — Invokes the edit screen with previously entered text with the
same recipient. After editing, press Send, the PTT button, or the SEND key to send.
•
Forward — Invokes the edit screen with the old message to send it to a different participant.
After editing, press Send, the PTT button, or SEND key to send.
•
Refresh — Re-orders the message list and displays the new messages.
•
Delivery Status (only for Outbox) — Shows the date and time of the message when it sent,
delivered, read, and expired was not delivered, expired was not read, failed unknown.
Embedded Number
This feature allows you to call a number from a message or to start a group call with the message
sender talkgroup.
Storing Numbers from Messages
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can save the sender's or embedded number from the message to a
new or existing contact.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 Highlight the required number and press Store.
7 Highlight required contact and press View.
NOTICE: To store a number for a new contact, select [New Contact] and fill out the
required fields. Press Done to save it..
8 Select Edit.
72
Send Feedback
Chapter 5: Main Menu
9 Choose the Type of the new number and press Done.
Calling Numbers in Messages
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can return a voice call to the sender of a message or to any number
that is embedded in the message text.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 To call, highlight to the required number and press the PTT button or the SEND key.
7 Select Ctype to choose the type of call (Private, Phone, or PABX).
8 Press the PTT button or the SEND key.
Making Group Calls on theTalkgroup of the Message Sender
Prerequisites: Embedded Number feature is enabled by your service provider.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and press the PTT button.
Immediate Message
When the new immediate message is received, radio plays the New Mail Received tone and displays
the content overlapping your previous screen. All immediate messages are stored in the Inbox. If the
radio is in PIN Lock state, immediate message is displayed after correct PIN is entered.
NOTICE: This is a selling feature.
Outbox
Outbox stores all sent messages.
Table 18: Outbox Icons
Icon
Description
Delivery in Progress
Delivery Accomplished
Delivery Failed
Table continued…
Send Feedback
73
Chapter 5: Main Menu
Icon
Description
Successful Outgoing Message
Failed Outgoing Message
CO Box
CO Box contains incoming and outgoing Call-Out messages arranged chronologically with the newest
at the top of the list. Clicking Select on a Call-Out message headline displays more detailed
information on the item.
When the radio is in normal mode, you are able to browse through all messages in the CO Box.
However, if the radio is in the Call-Out mode, you can only browse through the information regarding
the currently ongoing Call-Out message.
Related Links
Call-Out on page 128
RMS Box
RMS Box stores all incoming and outgoing Radio Messaging System (RMS) messages, both Status
messages and Free Text messages.
WAP Box
Each WAP Push message can be loaded immediately or stored as a message in WAP Box. Then it
can be accessed by pressing MENU → Messages → WAP Box. All the WAP Push messages are
passed to the browser.
Related Links
WAP on page 120
Templates
This feature is used to store up to 100 predefined and your message templates. Each of the Inbox and
Outbox message can be stored as a template. Each template name and text can be edited afterwards.
Sending User-Defined Templates
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Templates.
3 Highlight the required template name and press Send.
4 Do one of the following:
74
•
Enter the number or press abc to select the name from your contact list. Press Send.
•
Select required talkgroup from the TalkGroup List.
Send Feedback
Chapter 5: Main Menu
Setting User-Defined Templates
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Templates.
3 Highlight the required template and press MENU.
4 Select one of the following:
•
View — Displays template text.
•
Delete — Deletes the template.
•
Edit Text — Opens edit screen with the template text. Edit the text and press MENU. Select
Save Changes to save edited template, or Store to save the edited template as a new one.
•
Edit Name — Opens edit screen with the template name. Press Ok to save the template.
Predefined Templates
Predefined message templates are programmed into your radio. You are allowed to perform limited
edit operations of the predefined template. You can send it, but you are not able to store the edited
template or erase it from the predefined template list.
Viewing Predefined Templates
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Predefined.
3 Highlight the required template and press MENU key.
4 Select View.
Sending Predefined Templates
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Predefined.
3 Highlight the required template and press Send, the PTT button, or the SEND key.
NOTICE: You can edit the predefined template before you send it. Press the MENU key
and select Edit. Edit screen opens with the template text. You are only allowed to
replace the existing text.
Status Messages
The radio allows you to send two types of status messages: statuses and targeted statuses. Your
service provider determines which type is enabled on the radio.
Statuses can be sent either to a selected talkgroup or to a private number programmed by your service
provider. Targeted statuses can be sent to any talkgroup defined for the radio or to any private number
(from the contact list or entered manually).
Send Feedback
75
Chapter 5: Main Menu
Viewing a Status Message Number
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Send Status.
3 Press the MENU key and select View.
Sending Status Messages
This procedure allows you to send status messages to either a selected talkgroup or a programmed
private number. Only one option can be enabled at a time.
Prerequisites:
•
If sending statuses to talkgroups is enabled: switch to the talkgroup to which you want to send a
status message.
•
If sending statuses to private numbers is enabled: no action is needed, the private number is set up
by your service provider
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Send Status.
3 Do one of the following:
•
Highlight the required status message and press Select, the PTT button, or the SEND key.
•
If the status list is empty, enter a 5 digit status message number and press Send.
Targeted Status Messages
This feature enables sending status messages to user selectable addresses. By default, targeted
status messages can be sent to private or talkgroup addresses. Your service provider may restrict valid
addresses to numbers stored in Contacts.
Sending Targeted Status Messages
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Send Status.
3 Do one of the following:
•
Highlight the required status message and press Select, the PTT button, or the SEND key.
•
If the status list is empty, enter a 5 digit status message number and press Send.
4 Do one of the following:
•
Enter the number or press abc to select the name from your contact list. Press Send.
•
Select required talkgroup from the TalkGroup List.
The display shows one of the following delivery reports:
•
Status Sent.
•
Status Failed.
76
Send Feedback
Chapter 5: Main Menu
Contacts
This sub-menu stores all your contact numbers. Each entry requires the following information:
•
Name — if you store more than one number to one contact, this entry is required.
•
Type — each contact must be assigned to one of the following types:
Table 19: Contact Types
Contact Icon
Description
Private
Cannot have a speed dial number.
Mobile
Home
Work
PABX
Other
Pickers
Indicate more than one number in a contact.
•
# (number) — each contacts entry must contain a number.
•
Speed # — accept the default Speed Dial number or change it.
Creating Contacts
Procedure:
1 From the home screen, select Contcs.
2 Select [New Contact].
3 Highlight Name and press Change. Enter the name of your contact and press Ok.
4 Highlight Type and press Change. Select the required type of your contact.
NOTICE: You can use the left and right NAVIGATION keys to select the type of your contact
from the Contact Details screen.
5 Highlight # (number) and press Change. Enter the number of your contact and press Ok.
6 If needed, highlight Speed # and press Change. Enter the speed dial number (1– 1000) of your
contact and press Ok.
NOTICE: If the entered number exist, the radio displays Overwrite? message. Press
Yes to confirm, or No to enter the speed dial number again.
7 Press Done.
You have create a contact with one number. To add additional number repeat steps 4–6.
Send Feedback
77
Chapter 5: Main Menu
Editing Contacts
Procedure:
1 From the home screen, press Contcs.
2 Highlight the contact you want to edit.
3 Press the MENU key.
4 Press Edit.
5 Highlight one of the following entries and press Change to edit:
•
Name
•
Type
•
# (number)
•
Speed #
6 Press Done.
Deleting Numbers
Procedure:
1 From the home screen, press Contcs.
2 Select a contact you want to edit.
3 Use left or right NAVIGATION keys to choose the required number.
4 Press MENU.
5 Select Delete number.
NOTICE: If an entry contains only one number, deleting the number deletes the entry.
6 Press Yes.
Deleting Contacts
Procedure:
1 From the home screen, select Contcs.
2 Highlight a contact you want to delete.
3 Press the MENU key.
4 Select Delete contact.
5 Select Yes.
Checking Capacity
When and where to use: To see how many numbers are stored in the radio.
Procedure:
1 From the home screen, select Contcs.
2 Press the MENU key.
3 Select Capacity.
78
Send Feedback
Chapter 5: Main Menu
4 Select one of the following:
•
Private
•
Phone / PABX
•
Contact
Dialing through the Contact List
Procedure:
1 From the home screen, press Contcs.
2 To highlight the required contact, use up and down NAVIGATION keys, or enter up to 12 characters
of the contact name.
3 If the contact has more than one number, use left and right NAVIGATION keys to select the
required number.
4 Press the PTT button to initiate a simplex call with a Private number. Otherwise use the SEND
key to initiate a duplex call.
Bluetooth
There are three separate Bluetooth features available:
•
Bluetooth Audio - includes: Bluetooth Audio, Fast PTT, and Indoor Location
•
Bluetooth Connectivity - includes: Bluetooth Serial Port Profile (SPP) and Bluetooth Dial Up
Networking (DUN)
•
Bluetooth Radio Control - includes: Bluetooth Radio Control via AT commands
You can use Bluetooth to:
•
Connect the radio with wireless accessories, for example a headset, which gives you a greater
freedom of movement and increases your work comfort. Additionally, wireless accessories allow
performing the same activities in several ways. For example, you can change the volume level
either in the headset or on the radio.
•
Make your radio discoverable indoors to Bluetooth beacons.
•
Allow radio collaboration with various BT sensors or data capture devices e.g. biometric sensor, bar
code scanner or firearm device.
•
Increase connectivity by means of secure packet data services between the radio and a PDA
device or a Smartphone running appropriate applications.
•
Enable radio control via a PDA device.
The radio supports Bluetooth 2.1 + EDR standard. Secure Simple Pairing, one of its features, ensures
high level of security while pairing devices and thus protects you against recording and passive
eavesdropping.
Bluetooth operating range is approximately 10 meters. The usable range may be reduced if you
connect the radio with devices that support more limited ranges or if physical obstacles such as walls
appear between devices.
One radio can be connected with up to seven devices at the same time.
NOTICE: Bluetooth Audio, Bluetooth Connectivity and Bluetooth Radio Control are selling
features.
Send Feedback
79
Chapter 5: Main Menu
Bluetooth Interactions
The following features and situations limit the use of Bluetooth:
Transmit Inhibit Mode (TXI), Repeater Mode
Bluetooth does not work in the Transmit Inhibit Mode nor in the Repeater Mode. When the radio
enters one of those modes while Bluetooth is enabled, all remote devices are disconnected and
Bluetooth is disabled. After leaving the TXI or the Repeater Mode, Bluetooth is enabled again (if it
was previously turned on).
Covert Mode
The radio cannot enter Discoverable Mode while in the Covert Mode (the Covert Mode has a higher
priority).
Wired Audio Accessories
Wired audio accessories have a higher priority than Bluetooth audio accessories. If both types of
devices are connected to the radio, it disconnects the Bluetooth audio device. When a wired audio
device is already connected to the radio, scanning for Bluetooth audio devices is disabled.
Enabling and Disabling Bluetooth
Procedure:
1 From the home screen, press the MENU key.
2 Select Bluetooth → Bluetooth: On / Bluetooth: Off.
3 Select On to enable, or Off to disable Bluetooth.
When Bluetooth is enabled, the Bluetooth icon appears in the status icon area on the display.
However, the Bluetooth icon may not be visible at times, due to other icons with higher priority
being displayed in the same icon slot.
NOTICE:
Your service provider may configure the radio to automatically disable Bluetooth after
entering the home mode. The home mode is a state in which all the following conditions
are met: the radio is not in the Discoverable Mode, all active remote devices are
disconnected (including file transfer), and scanning for remote devices is not performed.
Related Links
Status Icons on page 31
Discoverable Mode
When the radio is in the Discoverable Mode, it is visible to other Bluetooth-enabled devices. Also, it
accepts connection requests from other devices attempting to send files to your radio or to establish a
DUN connection or start a remote control or AT Command session over Bluetooth. If enabled, the
following item appears in the radio menu: Discoverable (Menu → Setup → Bluetooth →
Discoverable). The radio remains discoverable for the amount of time configured by the user.
Configuring Bluetooth Settings
Procedure:
1 From the home screen, press the MENU key.
2 Select Bluetooth → Settings.
3 Select one of the following:
•
80
Bluetooth – enables/disables Bluetooth.
Send Feedback
Chapter 5: Main Menu
•
Name – edits the name of your radio. This name is visible to other remote devices.
•
Indications – enables/disables audible indications played by the radio during Bluetooth
actions.
•
Audio – determines the audio connection mode for headsets. You can select one of the
following:
•
Power Optimized – the Bluetooth audio link is released when there is no active call. This
option increases the battery life time, but causes a delay in the call setup time for group
calls. This delay may result in lost audio on some headsets.
•
GC Optimized – the Bluetooth audio link is kept open all the time. This option ensures
that audio during group calls is heard without any delay and the audio link is never lost,
but shortens the battery life time.
NOTICE: This setting does not affect the Motorola headset with PTT (NNTN8143_ or
NNTN8191_) as it is always in the GC Optimized mode.
Devices
This menu item lists all devices paired with your radio and allows you to perform the following
operations:
•
Connect a device
•
View and change device details
•
Disconnect a device
•
Delete a device
Pairing Bluetooth Devices with Your Radio
Pairing is a process that creates a link between two Bluetooth-enabled devices. Once paired, devices
remember each other and every subsequent connection between them is authenticated automatically.
When and where to use: To scan for available Bluetooth-enabled devices and to connect with them.
Procedure:
1 From the home screen, press the MENU key.
2 Select Bluetooth → Add Device. Ensure that the device you want to connect with is in pairing
mode.
The radio lists available devices that can be paired with your radio.
3 Highlight the required device and select Connect.
4 If needed, enter a PIN code or a passkey.
NOTICE: If you enter an incorrect PIN code and the subsequent paring attempts take too
long or result in an error message, power the Bluetooth device off and on. The radio
accepts 3 logging attempts.
Connecting/Disconnecting Devices
Procedure:
1 From the home screen, press the MENU key.
2 Select Bluetooth → Devices.
3 Highlight the required device and press Connect or Disconnect.
Send Feedback
81
Chapter 5: Main Menu
NOTICE:
Depending on languages installed on the radio, some characters in names of devices
might not be displayed properly.
Radio-initiated automatic reconnection with remote Bluetooth devices cannot be
guaranteed to be successful in 100% of cases when several devices need to reconnect
at the same time, due to the fundamental nature of Bluetooth. In case the reconnection
fails after a power cycle (power off and power on of the radio), reconnect the device
manually.
Managing Devices
Procedure:
1 From the home screen, press the MENU key.
2 Select Bluetooth → Devices.
3 Highlight the required device and press the MENU key.
•
Name – shows the name of the device (up to 32 characters long). The name is editable by
the user only if it has not been pre-set by the service provider.
•
Type – displays the device type. This menu item cannot be configured.
•
Access – defines how the radio behaves during a reconnection attempt after losing
connection to this device:
•
Automatic – the radio connects with the device automatically.
NOTICE: On some headsets, you may have to press the "Call" button to trigger
reconnection.
•
•
Ask – the radio asks you for confirmation before connecting with the device.
•
Manual – you need to connect with the device manually each time.
•
Never – the radio never connects with the device.
Delete – deletes the device from the paired devices lists.
Disconnecting All Devices
When and where to use: To disconnect all remote devices connected to your radio.
Procedure:
1 From the home screen, press the MENU key.
2 Select Bluetooth → Disconnect All.
All devices are disconnected.
NOTICE: To disconnect only one device, from the home screen select MENU → Bluetooth →
Devices, highlight the required device, and press Disconnect.
Indoor Location
When and where to use: Indoor Location can be used to keep track of radio users location while
indoors. When Indoor Location is activated, the radio is in a limited discoverable mode. Dedicated
82
Send Feedback
Chapter 5: Main Menu
Bluetooth beacons (sniffers) are used to locate the radio and determine its position. This feature is
included with Bluetooth Audio.
Procedure:
1 From the home screen, press the MENU key.
2 Select Bluetooth → Indoor Location.
3 Select Change.
4 Select On/Off to activate/deactivate Indoor Location.
The radio is now visible to Bluetooth location beacons.
NOTICE: The use of the Indoor Location feature may have a negligible impact on other
Bluetooth functionality of your radio.
Firearms
When and where to use: To select a firearm sensor device for Bluetooth connection.
Procedure:
1 From the home screen, press the MENU key.
2 Select Bluetooth → Firearms.
3 Scroll through the list to highlight your firearm sensor device and press Connect.
NOTICE:
Activation code must be sent to the device by third party application.
Radio-initiated automatic reconnection with remote Bluetooth devices cannot be
guaranteed to be successful in 100% of cases when several devices need to reconnect
at the same time, due to the fundamental nature of Bluetooth. In case the reconnection
fails after a power cycle (power off and power on of the radio), reconnect the device
manually.
The radio is now able to notify the dispatcher when the status of the firearm device changes. If
configured, the location (using GPS) of the radio is reported as well. Once a firearm sensor
device is connected, it can be managed from the Devices menu.
4 To disconnect a firearm sensor device, go to the Devices menu and follow the normal device
management procedure.
Browser
This menu item activates a WAP browser that allows you to browse the Internet from your radio.
Related Links
WAP on page 120
Security
This sub-menu stores all your security settings.
PIN Protect
This feature allows you to enable PIN code authentication at the next power on. This code protects
your radio against unauthorized use.
Send Feedback
83
Chapter 5: Main Menu
If you are unable to unlock the radio, you can only send or receive Emergency Calls and adjust the
volume level with the VOLUME KNOB.
NOTICE: If the radio uses a SIM Card PIN code and you are unable to unlock the radio, you
cannot take any action.
Related Links
Unlocking Your Radio on page 35
Changing PIN Codes on page 84
Protecting the Radio with a PIN Code
Procedure:
1 From the home screen, press MENU → Security → PIN Protect.
2 Select On.
3 Enter 4-digit PIN code. By default it is 0000 (four zeros).
NOTICE: To increase security, set your own PIN code.
Postrequisites: Each time you turn on the terminal, PIN code is required.
Unblocking Your Radio
Prerequisites: You blocked your radio by entering incorrect PIN code for three times (by default).
Procedure:
1 Radio displays Unit BlockedEnter PUK.
2 Enter 8–digit PUK (Personal Unblocking Key) number.
NOTICE: The PUK is an eight-digit master code provided by your service provider.
3 Enter the new PIN code twice.
Changing PIN Codes
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Change Code.
3 Radio prompts for the Old Code. Enter currently used 4-digit security code (default setting is
0000).
4 If the entered code matches the old code, radio prompts for the new code twice.
Your radio displays Code Accepted.
Related Links
Unlocking Your Radio on page 35
84
Send Feedback
Chapter 5: Main Menu
PIN Protect on page 83
Keylock Setup
The keypad lock feature allows locking the keypad to prevent pressing a key accidentally. The keypad
lock/unlock can be invoked by using an appropriate option from the radio menu or by using a
predefined menu shortcut. By default press MENU, and then * key.
Your service provider can determine which of the following elements are additionally inoperative while
the keypad is locked:
•
The PTT button
•
Side buttons
•
The ROTARY KNOB
•
The ON/OFF/END/HOME key
The EMERGENCY button is always operative.
Related Links
Locking/Unlocking the Keys/Buttons on page 35
Keypad Lock Notification
When the keypad is locked, your service provider can configure one of the following instructions:
•
None — no notification is displayed.
•
Notification Only — Keys Locked is displayed.
•
Notification and Instruction — Press Menu * to lock/unlock keypad is displayed.
Setting Automatic Keylock Delay
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Keylock Setup → Delay.
3 Use up and down NAVIGATION keys to change the minutes and press Done.
Setting Keylock on Startup
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Keylock Setup → Start Locked.
3 Select On/Off.
Air Encryption
Air Encryption is a feature that enables encryption of entire communication between the radio and
infrastructure, which results in increased security of calls, messages, and data.
If configured by your service provider, the radio plays a sound and displays Call & Data Not
Encrypted when encryption is on and you receive a clear call (unencrypted). This feature provides
service confidentiality between you and the system.
Send Feedback
85
Chapter 5: Main Menu
In the TMO Mode, when Air Encryption is enabled on you radio but cannot be supported due to an
infrastructure failure, the following icon appears on the display:
the DMO Mode, the radio displays:
.When encryption is not available in
This menu item allows you only to view air encryption state.
NOTICE: This is a selling feature.
Related Links
Status Icons on page 31
Viewing the Air Encryption State
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → AirEncrypt.
3 Your radio displays:
a Air Encryption Is Off.
b Air Encryption Is On.
Air Encryption Key Deletion
Please check with your service provider whether the radio is provided with Air interface encryption
keys. You can delete the Air interface encryption keys from the radio by entering the following
sequence: **00##.
NOTICE:
•
It takes a minute for this feature to delete all the encryption keys from the radio. During this
time, do not remove the battery.
•
Deletion is performed in idle TMO/DMO or Emergency Operation.
CAUTION: Using this feature will disable the radio, and your service provider will need to reenable the radio.
K Validity
K (Key) is a secret key the infrastructure uses to authenticate the radio in the system. It is part of the
authentication that provides service confidentiality between your radio and the system.
Verifying K Validity
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → K Validity.
3 Your radio displays:
86
•
K is Valid — the infrastructure can authenticate your radio.
•
K is Invalid — the infrastructure is unable to authenticate your radio. Please call your service
provider to restore the key to your radio.
Send Feedback
Chapter 5: Main Menu
SCK (Air Interface Encryption Class 2)
SCK (Static Cipher Key) is a secret key used for the Air Interface Encryption Class 2. It may be used to
encrypt calls and data in TMO and DMO. The SCK air interface encryption provides service
confidentiality between radios and infrastructure when in TMO, and between radios when in DMO. A
radio is capable of being loaded with up to 32 SCKs. Specific keys are used for encrypting the air
interface.
Any mismatch between radios and/or infrastructure impacts communication – only those using the
same key as the transmitting party are able to decode and hear the communication.
TMO SCK
Use of SCKs in TMO needs to be enabled by your service provider. The SCKs used in TMO are called
TMSCKs.
DMO SCK
Use of SCKs in DMO needs to be enabled by your service provider. The SCKs used in DMO are called
DMSCKs.
Changing DMO SCK
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → DMO SCK.
3 Press Next.
4 Radio displays Change to version .
5 Select one of the following:
•
Yes — to change the key. Your radio displays Key version changed.
•
No — to leave the key. Your radio displays Code Not Changed.
Verifying TMSCK Validity
When and where to use: To ensure that the TMSCKs in the radio are valid and can be used for the
air interface encryption.
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → TMSCK Validity.
3 The radio displays:
•
TMSCK is Valid – the radio can work encrypted in TMO.
•
TMSCK is Invalid – the radio cannot work encrypted in TMO. Please contact your service
provider to restore SCKs to your radio.
Send Feedback
87
Chapter 5: Main Menu
Verifying DMSCK Validity
When and where to use: To ensure that the DMSCKs in the radio are valid and can be used for the
air interface encryption.
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → DMSCK Validity.
3 The radio displays:
•
DMSCK is Valid – the radio can work encrypted in DMO.
•
DMSCK is Invalid – the radio cannot work encrypted in DMO. Please contact your service
provider to restore SCKs to your radio.
Covert Mode
This feature enables you to completely shut down all visible and audible alerts and notifications making
the radio unnoticeable even in a silent and dark environment.
When your radio is in the Covert Mode, you cannot enter the following menu items of the Setup menu.
•
Set Volume
•
Tones
•
Backlight (in Display menu item)
When the Covert Mode is turned on:
•
All tones are set to Off (corresponding to All Tones menu entry).
•
Group audio is set to Spkr Cntrl (corresponding to Audio Toggle menu entry).
•
The private speaker is set to Off (this setting causes all the calls are routed through the earpiece).
•
Backlight is set to Disabled (corresponding to Backlight menu entry).
•
The LED indicator is switched off.
The radio powers up in the mode set before turning off. Thus if the Covert Mode was set before turning
off, the radio turns on in the Covert Mode .
When the Covert Mode is turned off, all the changed settings are reverted to the previous state.
This feature can be used as the One-Touch Button.
Activating the Covert Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Covert Mode.
3 Select one of the following:
88
•
On — all tones are set to off, and the backlight and the LED are disabled immediately. The
group audio is routed to the earpiece. The radio displays Covert Mode On.
•
Off — all settings for tones, backlight and audio are restored. The radio displays Covert
Mode Off.
Send Feedback
Chapter 5: Main Menu
SDS Remote Control
SDS Remote Control is a feature that enables to remotely control behavior and configuration of the
radio via special SDS messages. The messages can be sent both in TMO and DMO (including the
Repeater Mode) by any radio capable of controlling other radios. During the execution of the Remote
Control messages, depending on your service provider settings, the radio can play a tone, or display
an appropriate icon in the status icon area.
NOTICE: This is a selling feature.
Setting SDS Remote Control
When and where to use: To enable/disable support of special SDS messages that allow remote
control of the radio.
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Remote Control.
3 Select On to enable, or Off to disable remote control.
Setup
This sub-menu allows you to change your radio configuration.
Ring Style
This sub-menu allows you to set the incoming call ring style.
Setting Ring Style
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Ring Style.
3 Select one of the following:
•
Duplex — To set the new ring style to all duplex calls.
•
Simplex — To set the new ring style to all simplex calls.
NOTICE: Upon entry into this sub-menu, the display shows the current ring style used.
4 Scroll to the desired style and press Select.
NOTICE: New ring style is played immediately for a few seconds. If necessary, adjust the
volume level.
Set Volume
This menu item allows you to adjust the Speaker and Earpiece tone volumes.
Send Feedback
89
Chapter 5: Main Menu
Related Links
Volume Adjustment Mode on page 92
Setting Volume
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Set Volume.
3 Select Speaker or Earpiece.
4 Select one of the following:
•
Voice Vol — sets the volume level for voice.
•
Duplex Vol — sets the volume level for duplex ringtones.
•
Simplex Vol — sets the volume level for simplex ringtones.
•
Keypad Vol — sets the volume level for keypad tones.
•
Tones Vol — sets the volume level for alert tones.
•
Call-Out Vol — sets the volume level for Call-Out tones (if enabled).
NOTICE: If the display shows only one option Volume, you can adjust all of the above
settings at once. You have the option to change the settings individually when the
Volume Adj. Mode is set to Individual.
5 Press right or left NAVIGATION key to change the value.
NOTICE: When the battery level is low it is not recommended to attach the 4 Ohm
speaker to the radio as it can cause reset or shutdown of the radio.
Related Links
Setting Volume Adjustment Mode on page 92
Language
This sub-menu allows you to change the language of the radio.
Setting Language
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Language.
3 Select desired language.
Data Setup
This menu item allows you to set up your radio to transmit and receive data from the external device.
To connect your radio accessory connector to the external device, use the PMKN4127 or PMKN4129
cable. The external device must run an application complying with the TETRA standards.
90
Send Feedback
Chapter 5: Main Menu
NOTICE:
•
Data services are available only in TMO Mode.
•
Data services are blocked in TXI Mode.
•
When set to Voice Only, the built in data modem is disabled to conserve battery power.
Setting Data Function
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Data Setup.
3 Select one of the following:
•
Voice Only — Your radio receives and transmits voice calls only.
•
Data Only — Your radio acts as a modem. It rejects incoming and outgoing voice calls
(except for Emergency Calls), status and text messages.
•
Voice & Data — Your radio acts as a modem but voice calls have priority over data calls and
can interrupt them.
Audio
This menu item allows you to adjust your radio audio settings.
Audio Profiles
An audio profile is a set of audio parameters, such as the volume of alert tones, that are configured by
your service provider to fit a particular operating environment. For example, the audio parameters can
be adjusted to situations when the radio operates inside a building or on a noisy street.
For a detailed description of a specific audio profile, contact your service provider.
Setting Audio Profiles
When and where to use: To adjust the audio parameters of the radio its current operating
environment.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Audio → Audio Profile.
3 Select a required profile.
Howling Suppression
The howling suppression is a mode increasing the stability of the acoustic feedback loop. The radio
eliminates howling caused by the feedback loop from the receiving radios to the sending radio in
simplex calls. You can toggle the howling suppression during an active call.
To enable this anti-howling function, you can either use the radio menu or the corresponding OneTouch Button.
Send Feedback
91
Chapter 5: Main Menu
Setting Howling Suppression
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Audio → Howling Suppr..
3 Select required setting.
NOTICE: Your service provider can set up the state of the howling suppression on
powering up the radio. Depending on the settings, the radio can either disable the
howling suppression or set the last remembered state.
Audio Toggle
You can control audio routing (speaker/earpiece) for any private or group call through the menu to
have all group calls in high audio.
Setting Audio Toggle
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Audio → Audio Toggle.
3 Select one of the following:
a Always Loud — The audio sound comes from the speaker (high audio only).
b Spkr Cntrl — The audio goes through the earpiece or the speaker.
Volume Adjustment Mode
You can set the volume to Individual or Common. When it is set to Individual, the volume level for
Voice, Duplex, Simplex, Keypad, Tones, and Call-Out can be set per user preferences. When set to
Common, the audio has one setting for all items.
NOTICE: When volume control capable Bluetooth device is connected, the radio always uses
the Common setting.
Related Links
Set Volume on page 89
Setting Volume Adjustment Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Audio → Volume Adj. Mode.
3 Select one of the following:
92
•
Individual — You can set Duplex, Simplex, Earpiece, Speaker and Keypad per your
preferences in MENU → Setup → Set Volume.
•
Common — You can set one value for all the items in MENU → Setup → Set Volume.
Send Feedback
Chapter 5: Main Menu
Related Links
Setting Volume on page 90
Tones
This field sets the volume level for the tones set.
NOTICE: The radio has two tone packs: Classic Tones (default) and New Tones. Your service
provider decides which tone pack is enabled.
Keypad Tone
You can activate/deactivate keypad tone at every key press.
Setting Keypad Tone
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → Keypad Tone.
3 Select one of the following:
•
On — Activates keypad tone.
•
Off — Deactivate keypad tone.
All Tones
You can activate/deactivate all tones.
Setting All Tones
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → All Tones.
3 Select one of the following:
a On — Activates all the tones.
b Off — Deactivates all the tones.
Talk Permit
You can activate/deactivate the tone heard upon pressing the PTT button.
Setting Talk Permit
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → Talk Permit.
3 Select one of the following:
•
Tone On — Tone heard upon pressing the PTT button.
•
Tone Off — No tone heard upon pressing the PTT button.
Send Feedback
93
Chapter 5: Main Menu
Clear to Send
You can activate/deactivate tone for the transmitting radio that the receiving radio is ready to accept
the transmission.
Setting Clear to Send
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → Clear to send.
3 Select one of the following:
•
Tone On — Activate clear to send tone.
•
Tone Off — Deactivates clear to send tone.
Periodic Alert
You can activate/deactivate periodic tone indication for the missed calls, the unread messages, and
low battery level. For each notification, your radio generates an unread message tone with the amber
LED color indication.
Setting Periodic Alert
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → Periodic Alert.
3 Select one of the following:
•
Alert — Activates/deactivates periodic tone.
•
Period — Indicates the time between each periodic tone.
D-PTT Tones
This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in
idle or the Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, the user can press and hold the PTT button once again to get the
permission to talk. Otherwise, if the user presses the PTT button while the D-PTT tone is played, it is
ignored.
After the D-PTT tone is sent keeping the PTT button pressed, it results in permission to talk. The DPTT tone is not audible on a sending radio.
NOTICE: This feature needs to be enabled by your service provider.
Setting D-PTT Tones
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → D-PTT Tones.
94
Send Feedback
Chapter 5: Main Menu
3 Select one of the following:
•
D-PTT Mode — Activates/deactivates D-PTT tone.
•
Tone Style— Indicates how many times the D-PTT tone is played.
Display
This menu item allows you to adjust your radio display settings.
Related Links
Display on page 30
Setting Flip Display
When and where to use:
The feature is useful for a user who has to wear the radio on a shoulder, belt, or lapel and at the same
time wishes to read the display upside down.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Flip Display.
3 Select one of the following:
•
On – to activate this feature.
•
Off – to deactivate this feature.
Setting Font Level
When and where to use: To increase/decrease text size so you can adjust the interface readability to
existing conditions.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Font Level.
3 Select one of the following:
•
1 – default size of the text.
•
2 – large size of the text. Keep in mind that less text can be displayed.
In some languages number of available font levels can be decreased.
Setting Large Idle Font
When and where to use: To enable/disable large font on the home screen.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Large Idle Font.
3 Select On to enable, or Off to disable displaying large font on the home screen.
NOTICE: Large Idle Font is not available in some languages.
Send Feedback
95
Chapter 5: Main Menu
Setting Screen Saver
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Screen Saver.
3 Select one of the following:
•
•
Activate — To activate/deactivate this feature. Select one of the following sub-options:
•
Auto — Makes the screen saver activate automatically after an amount of time.
•
Disabled — Disables the screen saver.
Text — To set the text on the screen saver when this feature is activated.
Setting Backlight
When and where to use: To save the battery power.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Backlight.
3 Select one of the following:
•
Auto – backlight is triggered by turning on the radio, by pressing any key on the device or on
the accessory that is connected to it. Also charging or getting signal from the services like:
Call-Out message, RUA request, DGNA and TX timeout during priority call are going to turn
on the backlight.
•
Semi Auto – backlight is turning on when you are switching on the radio, pressing assigned
button to the backlight feature, or charging.
•
Disabled – backlight is disabled and the display is always dimmed.
Setting Brightness
When and where to use: To set the luminance of the display and the keypad in an environment with
low visibility.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Brightness.
3 Manually adjust the brightness level using the right or the left NAVIGATION key.
Setting LCD Off
When and where to use: This feature sets the time so the display automatically turns off after a
specific amount of time.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → LCD Off.
3 Select one of the following:
•
96
Disabled — your radio display never goes off.
Send Feedback
Chapter 5: Main Menu
•
30 seconds, 1 minute, 2 minutes, 5 minutes, 15 minutes, 30 minutes — turns off the
radio display after defined time.
Setting Wallpaper
When and where to use: To change the look of the home screen.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Wallpaper.
3 Select one of the following:
•
On — To activate this feature.
•
Off — To deactivate this feature.
Time and Date
The Time and Date feature is triggered by the One-Touch Button.
This sub-menu controls the displayed time and date on the home screen.
NOTICE: Infrastructure synchronizes the time and date. When not within the infrastructure
signal range you can set the values manually.
Setting the Time Format
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Format → Format Time.
3 Select one of the following:
•
12-Hour — Displays the time with am (before noon) or pm (after noon) indication.
•
24-Hour.
Setting the Time Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Set → Set Time.
3 Enter current time using NAVIGATION keys or keypad.
4 Press Done.
Setting the Date Format
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Format → Format Date.
3 Select (D — day, M — month, Y — year):
Send Feedback
97
Chapter 5: Main Menu
•
DD/MM/YY
•
MM/DD/YY
•
DD-MON-YY
•
YY/MM/DD
Setting the Date Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Set → Set Date.
3 Enter current time using NAVIGATION keys or keypad.
4 Press Done.
Setting Time Offset
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Set → Time Offset.
3 Enter time offset using NAVIGATION keys.
NOTICE: You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or
behind.
4 Press Done.
Setting Automatic Updates for the Time and Date
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → System Update.
3 Select one of the following:
•
Off — All the infrastructure informations are ignored. The radio uses internal time and offset.
•
Time Only — Time displayed is calculated from the offset programmed by your service
provider added or subtracted from the infrastructure time.
•
Time & Offset — Time and offset are updated after receiving from the infrastructure.
Energy Economy
Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all
downlink time slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode
is not needed.
Enabling Energy Economy
Procedure:
1 From the home screen, press the MENU key.
98
Send Feedback
Chapter 5: Main Menu
2 Select Setup → Energy Economy → EE Selection.
3 Select one of the following:
•
On — Activates Energy Economy feature.
•
Off — Deactivates Energy Economy feature.
Viewing the Energy Economy Status
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Energy Economy → EE Status.
3 The Energy Economy status is displayed as:
•
Energy Ecnmy Is Supported By System
•
Energy Economy Is Currently Not Supported By System
Transmission Power Class
Transmission Power feature enables your radio to choose whether to transmit with Class 3L or Class
4. The signal strength icon indicates when the radio uses this feature.
Selecting RF Power
When and where to use: If you are entering the area that requires higher signal strength.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → RF Power.
3 Select one of the following:
•
Hi RF Power — Activates this feature.
•
Normal RF Pwr — Deactivates this feature.
NOTICE:
•
Changing RF Power Class to Normal RF Pwr during calls may result in dropping the
call. The power level may be not sufficient to sustain the transmission.
•
Battery consumption is higher when Hi RF Power is selected.
NOTICE: This is a selling feature.
Accry (Accessory) Setup
You can connect to the radio side connector two groups of accessories: IMPRES accessories and
CORE/Other/Secondary accessories.
If you connect an IMPRES accessory, the radio detects and recognizes the accessory automatically. In
case of CORE, Other (for example, a third party accessory), or Secondary accessory (for example, an
earpiece connected to an RSM), the radio may detect the connection, however, the accessory has to
be set manually in the Accry Setup menu.
Accry Setup contains the supported accessories, represented by their Model Number as defined by
the related Audio Device Descriptor (ADD). ADD is a set of parameters in the radio that defines the
audio setting (for example, gains and filters settings) for each accessory.
Send Feedback
99
Chapter 5: Main Menu
NOTICE: To ensure correct connection, do not press any RSM buttons when connecting the
RSM to the radio.
Selecting CORE/Other/Secondary Accessories
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Accry Setup.
3 Select one of the following:
•
CORE RSM/PHF — select an accessory from the list of the CORE accessories.
•
CORE Earpiece — select an earpiece from the list of the CORE accessories.
•
RSM Earpiece — specify if the accessory is connected to the RSM.
•
Bluetooth Headset — select an accessory from the list of available Bluetooth headsets.
Book On
This menu item allows you to edit RUA/RUI feature settings to automatically accept or reject book on
requests.
Related Links
RUA/RUI on page 120
Rotary Knob
This menu item allows you to set all the related functionality of the VOLUME KNOB and TALKGROUP KNOB.
Setting Rotary Lock
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Rotary Lock.
3 Select one of the following:
•
Locked — Locks VOLUME KNOB and/or TALKGROUP KNOB.
•
Unlocked — Unlocks the VOLUME KNOB and TALKGROUP KNOB.
•
Disabled — Locking function is unavailable. Your VOLUME KNOB and TALKGROUP KNOB is
unlocked all the time.
Setting In Keypad Lock
When and where to use: To set behavior of the rotary knob when the keypad is locked.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → In Keypad Lock.
3 Select one of the following:
•
100
Lock None — Scrolling and volume setting functionality is available.
Send Feedback
Chapter 5: Main Menu
•
Lock Volume — TALKGROUP KNOB can be only used for scrolling.
•
Lock Scroll — VOLUME KNOB can be only used for setting the volume.
•
Lock Both — Scrolling and volume setting functionality is unavailable.
Setting Rotary Knob Wrap Around
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Wrap Around.
3 Select one of the following:
•
On — Scrolling through the talkgroup list is looped or is moved to the next folder.
•
Off — Scrolling through the talkgroup list stops after reaching first or last talkgroup in the
current selected folder.
NOTICE: Only when Wrap Around is set to On and the Scroll Range is set to Scroll To
Next, you are able to scroll through all the talkgroups and folders.
Setting Rotary Knob Scroll Range
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Scroll Range.
3 Select one of the following:
•
Stay In Range — Scrolling through the talkgroups in the current folder only.
•
Scroll To Next — Scrolling through all the talkgroups and folders.
NOTICE: Only when Wrap Around is set to On and the Scroll Range is set to Scroll To
Next, you are able to scroll through all the talkgroups and folders.
Setting Rotary Knob Talkgroup Selection
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Confirm TG Sel..
3 Select one of the following:
•
On — You need to confirm the talkgroup selection by pressing Select or pressing the PTT
button to immediately start a call on a new talkgroup.
•
Off — Attaches to the selected talkgroup without any additional prompt
Setting Rotary Knob Function Keys
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Function Keys.
3 Select one of the following:
•
Auto — Sets the SIDE buttons according to the Rotary Mode.
Send Feedback
101
Chapter 5: Main Menu
NOTICE: If the Rotary Mode is set to:
•
Dual or Volume — Display shows Auto Selected (OTB), volume can be set only
through VOLUME KNOB.
•
Scroll — Display shows Auto Selected (Volume), volume can be set only
through SIDE buttons.
•
Volume Adjust. — Sets the SIDE buttons to adjust volume level.
•
OTB Feature — Sets the SIDE buttons to the predefined One-Touch Button features.
Group Setup
This sub-menu allows you to set the operation parameters, scanning and my groups folder.
Standard Home Group
This menu item allows you to configure the standard home group to be used during start up and when
changing modes: TMO –> DMO and TMO –> Repeater.
Related Links
Operations Parameters on page 102
Operations Parameters
When and where to use: If you want to define the radio mode and the talkgroup at the radio startup,
and when changing modes TMO->DMO and TMO-> Repeater.
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → Operations Parameters.
3 Select Startup. Select one of the following:
•
TMO – the radio powers up in TMO mode.
•
DMO – the radio powers up in DMO mode.
•
Last Selected – the radio powers up in the mode it was in when last powered down.
4 Select Home Group Startup. Select one of the following:
•
Last Selected – the radio enters the TMO/DMO talkgroup which was last selected before
power down.
•
Home Group – the radio enters the Home Group (TMO or DMO) at power up, depending on
the radio mode entered at power up.
5 Select HGr TMO->DMO/Rep. Select one of the following:
102
•
Last Selected – when changing modes the radio enters the DMO Talkgroup last selected,
i.e. the DMO Talk Group active last time the Radio was in DMO Mode. If Group Mappings
are configured, they will take precedence and the DMO Talkgroup mapped to the current
TMO Talkgroup is used.
•
Group Mappings – when changing modes the radio enters the DMO Home Group unless a
Group Mapping is configured. If Group Mappings are configured, they will take precedence
and the DMO Talkgroup mapped to the current TMO Talkgroup is used.
•
Home Group – when changing modes the radio enters the DMO Home Group, ignoring
possible group mappings.
Send Feedback
Chapter 5: Main Menu
6 Select TMO Home Group – configures the TMO Home Group/Home Folder.
7 Select DMO Home Group – configures the DMO Home Group.
Related Links
Standard Home Group on page 102
Scan
This menu item allows you to activate/deactivate scanning, view the active scan list, and edit the scan
lists. This feature is available only for the TMO Mode. Your radio joins any group call as long as this
group is defined in the scan list and scan is turned on.
Related Links
Activating Talkgroup Scanning on page 38
Activating Talkgroup Scanning
When and where to use: If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → Scan → Scanning.
3 Select Select List and then a list name.
Your radio displays list name Selected.
4 Select Scanning → On.
Your radio is scanning on the predefined scan list.
Related Links
Scan on page 103
Setting Talkgroups in the Active Scan List
When and where to use: If you want to edit talkgroups in the active scan list.
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → Scan → Active List.
NOTICE: If Scanning is Off is displayed, go to Group Setup → Scan → Scanning →
On to enable scanning.
3 Select View and highlight the required talkgroup.
4 Press MENU.
5 Select one of the following:
•
Delete — Erases this group from the active scan list.
•
Priority and select new priority to Low, Medium or High.
Send Feedback
103
Chapter 5: Main Menu
Setting Scan Lists
When and where to use: If you want to set up any scan list.
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → Scan → Scan Lists.
3 Highlight required scan list and press MENU to see additional settings:
•
Rename — Enters new name for that scan list.
•
Capacity — Displays the number of assigned and unassigned talkgroups for the scan list.
•
Clear — Deletes all the talkgroup assigned to that scan list.
•
Add Group — Adds a talkgroup to the scan list. Select one talkgroup from your talkgroup
folders and assign appropriate priority.
•
Edit — Changes the priority of the required talkgroup or deletes it.
Deleting Talkgroups from Scan Lists
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → Scan → Scan Lists.
3 Highlight the required scan list and press MENU → Edit.
4 Highlight the required talkgroup and press MENU → Delete.
My Groups
This sub-menu allows you to select/edit your favorite group list.
Adding Favorite Folders
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → My Groups.
3 Select [New Folder].
4 Enter the name and select Ok.
Adding Talkgroups to Favorite Folders
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → My Groups.
3 Select .
4 Select [New Group].
5 Select the required talkgroup by Folder or by alphabetic search.
104
Send Feedback
Chapter 5: Main Menu
Editing My Folder List
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → My Groups.
3 Highlight required favorite folder.
4 Press MENU.
5 Select one of the following:
•
Rename Folder — Edits the name of the folder. Enter new folder name and press Ok.
•
Delete Folder — Deletes selected folder. Press Yes.
NOTICE: You cannot delete the last favorite folder.
Deleting Talkgroup from Favorite Folders
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → My Groups.
3 Select required favorite folder.
4 To delete one talkgroup, highlight it and select Delete.
NOTICE: To delete all the talkgroups from the folder, press MENU and select Delete All.
Favorites
Favorites contains shortcuts to frequently used talkgroups and contact numbers that are organized in
favorite folders.
To quickly access favorite folders, from the home screen press the up NAVIGATION key. To scroll through
items inside favorite folders, you can either use the NAVIGATION keys or the ROTARY KNOB.
Adding Talkgroups to Favorites
Prerequisites:
To add a DMO talkgroup, ensure that the radio is in DMO.
To add a TMO talkgroup, ensure that the radio is in TMO.
Procedure:
1 From the home screen, press the Optns key.
2 Select one of the following:
•
TG by Folder – contains talkgroups arranged by folders.
•
TG by abc – contains talkgroups arranged alphabetically.
3 Find and highlight a talkgroup that you want to add to Favorites.
4 Press the MENU key and select Add to Favorites.
5 Select a folder you want to add the talkgroup to and press Select.
Send Feedback
105
Chapter 5: Main Menu
Related Links
Entering DMO Mode on page 52
Managing Folders in Favorites
Procedure:
1 From the home screen, press the MENU key.
2 Select Favorites.
3 Highlight a required folder.
4 Press the MENU key.
5 Select one of the following:
•
Rename Folder – changes the name of the folder. Enter a new folder name and press Ok.
•
Delete Folder – removes the selected folder from Favorites. Press Yes to confirm deletion.
NOTICE: You cannot delete the last favorite folder or a folder that contains at least
one non-erasable item.
Deleting Folders from Favorites
Procedure:
1 From the home screen, press the MENU key.
2 Select Favorites.
3 Find and highlight a required folder.
4 Press the MENU key.
5 Select Delete Folder. Press Yes to confirm deletion.
NOTICE: You cannot delete the last favorite folder or a folder that contains at least one
non-erasable talkgroup.
Deleting Items from Favorites Folder
When and where to use: To delete a single contact number or a talkgroup from a favorite folder.
Procedure:
1 From the home screen, press the MENU key.
2 Select Favorites.
3 Select a folder containing the item you want to remove.
4 Highlight the item and select Delete. Press Yes to confirm deletion.
Deleting All Items from Favorite Folders
When and where to use: To delete all contact numbers and talkgroups stored in a favorite folder.
Procedure:
1 From the home screen, press the MENU key.
2 Select Favorites.
106
Send Feedback
Chapter 5: Main Menu
3 Select a required folder.
4 Press the MENU key and select Delete All. Press Yes to confirm deletion.
My Info
This sub-menu allows you to view your own private, phone, and radio info.
Viewing and Modifying Personal Information
Procedure:
1 From the home screen, press the MENU key.
2 Select My Info.
3 Select one of the following:
•
My Private Num – displays your radio private number.
•
My Phone Num – displays your radio phone number.
NOTICE: To modify the displayed phone number, select Edit. Type the number and
press Ok.
•
Radio Info – displays radio information: manufacturer, product type, ISSI, TEI, Serial
Number, and OPTA.
NOTICE: OPTA information is optional.
•
Battery Info – displays the battery charge level.
Recent Calls
You can view the history of all calls:
•
Dialed — calls you initiated.
•
Received — calls you answered.
•
Missed — calls you received but not answered or rejected.
Each list of calls may contain up to 50 numbers, the most recent call being at the top of the list. If the
number of a recent call is stored in the contact list, the name associated with the number appears in
the recent calls list. A number dialed more than once, appears only once in the list.
Viewing Recent Calls
Procedure:
1 From the home screen, press the MENU key.
2 Select Recent Calls.
3 Select one of the following:
•
Dialed
•
Received
•
Missed
4 Select a required call from the list.
5 Press the MENU key.
Send Feedback
107
Chapter 5: Main Menu
6 Select View.
NOTICE: Press down NAVIGATION key to bypass first two steps.
NOTICE: Call time information is only available if the time and date are set in the radio.
Call duration is not available in the missed calls list.
Calling from Recent Calls
Procedure:
1 From the home screen, press the MENU key.
2 Select Recent Calls.
3 Select one of the following:
•
Dialed (from the home screen press SEND key to access Dialed Calls list)
•
Received
•
Missed
NOTICE: From the home screen press down NAVIGATION key, to access Recent Calls
menu item.
4 Highlight the required call and press the PTT button for private calls or press theSEND key to
make a phone call.
NOTICE: Phone calls are only available in TMO Mode.
Storing Recent Calls to Contacts
Procedure:
1 From the home screen, press the MENU key.
2 Select Recent Calls.
3 Select Dialed, Received or Missed.
4 Press Store.
NOTICE: If Store is not assigned to the left SOFT key, the number is already stored in
your contact list.
5 To store the number as a new entry, select [New Contact]. Or, to store the number to an
existing entry, select the entry, and press View then select Edit.
6 With the contact type field highlighted, scroll left or right to display the contact type you want to
assign the number.
7 Select Done.
Deleting Recent Calls
Procedure:
1 From the home screen, press the MENU key.
2 Select Recent Calls.
3 Select Dialed, Received or Missed.
108
Send Feedback
Chapter 5: Main Menu
4 Press MENU on the required call.
5 Select Delete.
NOTICE: To erase all the calls, select Delete All.
Shortcuts
This sub-menu allows you to set up shortcuts to access frequently used menu items.
Creating Menu Shortcuts
When and where to use: To assign a shortcut for the menu item.
Procedure:
1 From the home screen, press the MENU key.
2 Scroll to the item you want as a shortcut.
3 Press and hold MENU when the item is highlighted.
Example: Creating a shortcut to the All Tones options.
1 From the home screen, press the MENU key.
2 Select Setup → Tones.
3 Highlight All Tones and press and hold MENU until Assign Shortcut for:All Tones is
displayed.
4 Select Yes and ShortcutsKey:1 is displayed.
5 Press Done.
NOTICE: To use this shortcut, from the home screen, press MENU and the key
1.
Editing Menu Shortcut Lists
Procedure:
1 From the home screen, press the MENU key.
2 Select Shortcuts.
3 Highlight a required shortcut and press MENU.
4 Select one of the following:
•
Edit — Changes the assigned key. Type required number and press Ok.
NOTICE: Type a number between 1–20.
•
Delete — Erases highlighted shortcut. Select Yes to confirm.
•
Delete All — Erases all the shortcuts. Select Yes to confirm.
Networks
This menu item allows you to switch between the radio operation modes.
Send Feedback
109
Chapter 5: Main Menu
Related Links
Entering TMO / DMO Mode on page 36
Selecting Network Operation Mode on page 110
Selecting Network Operation Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Networks.
3 Select one of the following:
•
Networks Sel — Selects the network to which the radio is allowed to register.
•
Trunked Mode — Switches to the mode using infrastructure.
•
Direct Mode — Switches to the mode without using infrastructure.
•
TXI Mode — Select Activate to stop sending any radio transmission.
NOTICE: If the radio is in TXI Mode, it is not possible to switch from Direct Mode to
Trunked Mode.
Related Links
Entering TMO / DMO Mode on page 36
Networks on page 109
Selecting Your Network
Procedure:
1 From the home screen, press the MENU key.
2 Select Networks → Networks Sel → Home Only.
3 Your radio registers to the home network. If several home networks are defined, the radio
registers to the first available network on the list.
Using the Select Net Registration
When and where to use: Use this feature to migrate to another predefined network, when you are out
of the range of your network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the MENU key.
2 Select Networks → Networks Sel → Select Net.
3 Select the required network from the list.
Your radio registers to the selected network.
110
Send Feedback
Chapter 5: Main Menu
Using the Foreign Network Registration
When and where to use: Use this feature to migrate to another predefined network, when you are out
of the range of your network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the MENU key.
2 Select Networks → Networks Sel → Foreign Nets.
Location
See the GPS Location Service for more information.
Related Links
GPS Location Service on page 63
Viewing Your Position
Procedure:
1 From the home screen, press the MENU key.
2 Select Location → Position.
3 Scroll to view the results about the last time your location was calculated.
NOTICE: To refresh your position:
•
Select Position — the radio refreshes its position automatically
•
Press Refresh
Viewing Testpage
Procedure:
1 From the home screen, press the MENU key.
2 Select Location → Testpage.
3 Select one of the following:
•
Position – displays detailed information on radio’s current position: time, N (latitude), E
(longitude), H (height), Sats Used (a number of tracked satellites), B (bearing), HS
(horizontal speed), LC (level of confidence).
•
Power – displays detailed information on a particular satellite: PRN code, Status, Mode, C/N
(carrier-to-noise ratio).
•
Version – displays detailed information on GPS version: SW (software version), HW
(hardware version), ASIC (application-specific integrated circuit), RC (release code).
Changing GPS Accuracy
Procedure:
1 From the home screen, press the MENU key.
2 Select Location → Accuracy.
3 Select one of the following:
Send Feedback
111
Chapter 5: Main Menu
•
Medium (default) — Power consumption optimization is combined with less position
accuracy.
•
High – Better position accuracy is combined with less power consumption optimization.
NOTICE: If connected to an external charging device, the radio automatically enters the
High mode.
Packet Data
The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet
Protocol (IP).
NOTICE: To transfer data from a standard computer over the air, connect the computer via the
data cable PMKN4129 with your radio. Your service provider has to setup additional
applications on your computer.
If set up by your service provider it is possible to accelerate the transmission by using the Multi-Slot
Packet Data (MSPD) Service.
NOTICE: This is a selling feature.
Viewing Data Statistics
Procedure:
1 From the home screen, press the MENU key.
2 Select Packet Data.
NOTICE: Data services are only available in TMO Mode. The data option must be set to
Voice & Data or Data Only.
3 Select one of the following:
•
Sent Data — the number of KBs sent and throughput since current Packet Data activation is
displayed.
•
Received Data — the number of KBs received and throughput since current Packet Data
activation is displayed.
•
Bandwidth — active data session percentage is shown.
•
Failed Transfer — the percentage of failed sent/received packets.
NOTICE: N.A. — standby packet data session.
Viewing Encryption Status
Procedure:
1 From the home screen, press the MENU key.
2 Select Packet Data → Encryption.
3 The encryption state of the ongoing packet data session is displayed:
112
•
Packet Data Channel Clear
•
Packet Data Channel Encrypted
•
EncryptionN/A (clear)
Send Feedback
Chapter 5: Main Menu
Crypto Menu
This sub-menu allows you to manage SIM card based End-to-End Encryption.
The End-to-End Encryption is used for:
•
Encryption of voice transmission in the DMO and TMO Modes.
•
Encryption of messages transmission in the TMO Mode.
•
Encryption of messages transmission in the DMO Mode (the radio cannot be in call).
•
Encryption of position data (GPS) transmission in the TMO and DMO Modes.
•
Transfer of Operational Tactical Address (OPTA) in the TMO and DMO Modes.
•
Management of encryption keys in the TMO Mode.
Setting Clear Call Alarm
When and where to use: Use this menu item to configure an alarm tone notifying about any clear
transmission.
Procedure:
1 From the home screen, press the MENU key.
2 Select Crypto Menu → Clear Call Alarm.
3 Select Simplex Calls or Duplex Calls.
4 Select one of the following:
•
Off – the alarm is disabled.
•
Single – the alarm sounds once at the beginning of a clear call.
•
Continuous – the alarm sounds periodically throughout a clear call.
Updating Encryption Keys
When and where to use: Use this menu item to update old or incorrect encryption keys.
Procedure:
1 From the home screen, press the MENU key.
2 Select Crypto Menu → Upd Encr Keys.
3 Select Upd Group Key to start the update.
NOTICE:
You can update the encryption keys if the End-to-End Encryption is enabled. The keys cannot
be updated when the radio is in a call or in DMO.
Viewing OPTA
When and where to use: Use this menu item to view Operational Tactical Address (OPTA) providing
supplementary information about a subscriber's organization and operational role.
Procedure:
1 From the home screen, press the MENU key.
2 Select Crypto Menu → Show OPTA.
Send Feedback
113
Chapter 5: Main Menu
Setting OPTA Filter
When and where to use: Use this menu item to define which characters are masked when the OPTA
name is displayed.
Procedure:
1 From the home screen, press the MENU key.
2 Select Crypto Menu → OPTA Filter.
3 Highlight check boxes using the NAVIGATION keys and press Select to set which characters are
masked when the OPTA name is displayed.
4 Press Done to confirm the changes.
Starting Crypto Registration
Prerequisites: Your radio cannot be in an active call nor in DMO.
Procedure:
1 From the home screen, press the MENU key.
2 Select Crypto Menu → Crypto Registr.
3 Select Start Registr to start the registration.
Configuring Audio Settings
When and where to use: Use this menu item to change the audio output for a group call when the call
is encrypted but the End-to-End Encryption is disabled.
Procedure:
1 From the home screen, press the MENU key.
2 Select Crypto Menu → Audio Settings.
3 Select Encr Audio On to enable or Encr Audio Off to mute the encrypted audio for clear mode.
Setting DMO Encryption Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Crypto Menu → DMO Encr Mode.
3 Select DMO 1 or DMO 2 to enable the required mode.
Setting Encryption Keys for SDS Messages
When and where to use: Use this menu item to set the encryption keys for group and individual SDS
messages.
Procedure:
1 From the home screen, press the MENU key.
114
Send Feedback
Chapter 5: Main Menu
2 Select Crypto Menu → SDS Encr Mode.
3 Select Individual SDS or Group SDS.
4 Select Global Key or Group Key.
Send Feedback
115
This page intentionally left blank.
Features
Chapter 6
Features
Private Call
The Private Call, also called point-to-point, or individual call, enables calling between two individuals.
No other radio can hear the conversation. This call type can be carried out in two ways:
•
Duplex call (if the system allows), in TMO Mode. Both parties can speak at the same time.
•
Simplex call, in TMO or DMO Mode. Only one party can speak at a time.
When a DMO Private Call takes place, radios not involved in this call receive the channel busy
indication. The radios are identified using its radio numbers.
Related Links
Emergency Individual Calls (Private or MS-ISDN) on page 58
MS-ISDN on page 119
Making Private Calls
Procedure:
1 From the home screen, enter a number.
2 If Private is not the first type of call presented, press Ctype repeatedly to select it.
3 When you are in the following mode:
a TMO — For simplex calls, press and release the PTT button. You hear a ringing tone.
Otherwise, press and hold the PTT button. Wait for the talk permit tone before talking, and
release the PTT button to listen. For duplex calls, press and release the SEND key. You hear
a ringing tone.
b DMO — Only simplex calls are available. Press and hold the PTT button. Wait for the talk
permit tone before talking, and release the PTT button to listen.
4 To end the call, press the END key.
Radio Messaging System (RMS)
The Radio Messaging System (RMS) feature enables radio to receive and send RMS messages
through the TETRA network using the Short Data Service.
There are two types of RMS messages:
•
RMS Status – a predefined code that is sent bidirectionally between the radio and the service
provider. The radio can have up to ten statuses that are assigned to numeric keys from 0 to 9. The
latest received or sent RMS status is kept on the home screen until the next power cycle. A
received RMS status is displayed in blue color font on the home screen.
RMS Free Text – a unidirectional message containing free text that is sent to the radio by the
service provider. Since this type of message is longer, the radio displays only its beginning on the
home screen and to read its remaining part, you need to go to Menu → Messages → RMS Box.
The latest RMS free text is kept on the home screen until the next power cycle.
RMS free text messages and incoming and outgoing RMS statuses (with the exception of RMS
statuses sent) are stored in the RMS Box. Its capacity is maximum ten entries for incoming and
Send Feedback
117
Chapter 6: Features
outgoing RMS messages. If the RMS Box is full, any new incoming or outgoing RMS message
overwrites the oldest message (received or sent).
The radio receives and sends RMS messages only from and to the numbers predefined by your
service provider.
NOTICE: This is a selling feature.
RMS Icons
Table 20: RMS Icons
Icon
Description
RMS Status Received
Indicates a new RMS status message just arrived.
RMS Status Sent
RMS Box Read Message
RMS Box Unread Message
Sending an RMS Status
Prerequisites: Your service provider enabled this feature and the radio is in the RMS mode.
When and where to use: To send a predefined RMS status using numeric keys.
Procedure:
1 Press and hold a required key. If you press the key for too short, the radio initiates a Private/
Phone/PABX call.
One-Touch Dial
This feature allows you to call by pressing and holding one of the keys (1-9).
NOTICE: If the One-Touch Button feature is enabled, One-Touch Dial is disabled. If no feature
is assigned to a button, your radio displays an Unassigned Button message.
Talkgroup Dialing by Index
This feature allows you to attach to any talkgroup by dialing its index, instead of choosing it from the
talkgroup folders and lists.
NOTICE: It is also known as Talkgroup Speed Dial.
Viewing the Talkgroup Speed Number
Procedure:
1 From the home screen, press Optns.
118
Send Feedback
Chapter 6: Features
2 Select one of the following:
•
TG by Folder then select the folder and highlight the required talkgroup.
•
TG by abc enter up to 15 characters to narrow the talkgroup names and highlight the
required talkgroup.
3 Press MENU → View.
Example: Radio displays SpeedNum1*, which means that this talkgroup speed number is 1.
Selecting Talkgroups by Index
Procedure:
1 From the home screen, enter talkgroup speed number and *.
2 Press Attach.
NOTICE: To start a group call, press the PTT button.
Phone and PABX Calls
The Phone Call allows you to call a landline telephone number or a cellular mobile phone number. The
Private Automatic Branch Exchange (PABX) Call allows you to call local (office) extension numbers.
Making Phone or PABX Calls
Procedure:
1 From the home screen, enter the number.
2 If Phone or PABX are not the first type of call presented, press Ctype repeatedly to select it.
3 Press SEND key.
Phone/PABX Speed Dial
This feature allows you to dial Phone/PABX by a shortened number of up to three digits instead of the
full number. The Phone/PABX Speed # number is assigned when the dialed number is added in the
contact list.
NOTICE: This feature is available only in TMO Mode.
Using the Phone/PABX Speed Dial
Procedure:
1 From the home screen, enter the predefined Phone/PABX speed dial number and # key.
2 Press SEND key.
MS-ISDN
This feature adds to the radio ISDN number. You can choose between MS-ISDN and ISSI to address
the call, send the message or pre-defined templates. It works for both simplex and duplex calls, based
on the assigned ISDN number.
Send Feedback
119
Chapter 6: Features
Related Links
Emergency Individual Calls (Private or MS-ISDN) on page 58
Private Call on page 50
Short Number Dial
This feature allows you to dial part of the full number of the person you wish to call. Your radio
automatically completes the number.
Example: Your radio number is 4282564.
1 Dial 564 (instead of 4282564, the full number).
2 To place the call, press the PTT button or the SEND key.
RUA/RUI
Radio User Assignment (RUA) and Radio User Identity (RUI) enables authentication service. Only the
successful logon on any temporary radio, provides the full access and your permanent radio
functionality, so you can be still reached with your permanent number. A logon failure results in limited
service.
You can differentiate the RUA/RUI state by the interface color:
•
Blue — you are logged on
•
Gray — you are logged off
Radio States
•
Full Service — user logon was successful. Your radio has full functionality.
•
Limited Service — user not logged on. Specified by the service provider.
•
Pseudo Log On — occurs only in the Local Site Trunking (LST). You radio has full functionality
available (depending on the service provider settings) except some services like forwarding calls.
The RUI Pseudo Log On icon is displayed.
Book On
Your service provider assigns particular radio to one person for a predefined period of time. You are
only going to see the screen with your login and the full service is granted.
Force Off
Your service provider can log you off. Radio displays Force Off.
NOTICE: This is a selling feature.
Related Links
Book On on page 100
WAP
Wireless Application Protocol (WAP) is a standard for application layer network communications in a
wireless communication environment such as TETRA network. The protocol is used to access the
mobile web from a radio through a WAP browser.
120
Send Feedback
Chapter 6: Features
NOTICE: This is a selling feature.
Related Links
WAP Box on page 74
WAP Browser
The Openwave Mobile Browser is a WAP-compliant user agent. The WAP browser provides all of the
basic services of a computer-based web browser. Whenever any preemptive display interrupts the
browser session, the browser needs manual reactivating to return. The WAP browser does not support
right-to-left languages (as Arabic and Hebrew); English is used instead. For the content in these
languages, the characters are not displayed.
NOTICE: Depending on the radio configuration and the network conditions, the WAP browser
may not display images properly (or may display them with a delay).
Entering the Browser
Prerequisites: From the home screen, press the MENU key. Set Setup → Data Setup to Data Only or
Voice & Data.
Procedure:
1 From the home screen, press the MENU key.
2 Select Browser.
3 Optional: Exit the browser by pressing and holding the END key.
Entering Browser Menu Panes
Prerequisites: You are in the browser.
Procedure:
1 Press Menu or MENU key.
2 Usually, it brings up the Navigate pane, or the last browser menu pane.
NOTICE: If the web page you navigated to has two or more soft keys/options, the
Options pane pops up. From here, you may scroll to other panes with the left or right
navigation keys Or you may select Browser Menu and then scroll to the required pane.
Tips for Browsing
Create and use the following for easy browsing.
Creating Bookmarks through the Navigate Pane
Procedure:
1 Enter the browser and browse to the required page.
2 Press Menu to enter the browser menu.
3 Select Mark Page.
4 The screen displays the title and URL of the marked page.
5 To save it:
Send Feedback
121
Chapter 6: Features
a Press Save (or Select) to save the page in bookmarks.
b Select Menu and select an option:
•
Save — Confirms the bookmark creation.
•
Edit — Allows you to edit the title, folder, choice, and URL of the created bookmark.
Creating Bookmarks through the Bookmarks Pane
Procedure:
1 Enter the browser.
2 Scroll to Bookmarks pane.
3 Select Organise (if there are no saved bookmarks), or More... .
4 Select Menu.
5 Scroll to New Bookmark.
6 Enter the bookmark title and URL, and select its location.
7 Press Save.
Using Bookmarks
Procedure:
1 Enter the browser.
2 Scroll to Bookmarks pane.
3 Scroll to the required bookmark and select Go. The bookmark downloads the selected page
from the web.
Creating Hotkeys
Procedure:
1 Enter the browser.
2 Scroll to Bookmarks pane.
3 Scroll to the required bookmark.
4 Press MENU. Select Hotkeys.
5 Select an unassigned key (0–9).
6 Click Assign. The display shows the bookmark and its assigned hotkey.
Using Hotkeys
Procedure:
1 Enter the browser.
2 Press and hold a hotkey to download the corresponding bookmarked page from the web.
122
Send Feedback
Chapter 6: Features
Saving Pages
When and where to use: Save a page for off-line browsing.
Procedure:
1 Enter the browser and browse to the required page.
2 Press Menu.
3 Scroll to Tools pane.
4 Select Save Page. Edit the proposed page title if required. Scroll down and select Save. The
page will be saved in the Bookmarks Saved Pages folder.
Selecting Saved Pages
Procedure:
1 Enter the browser.
2 Scroll to Bookmarks pane.
3 Select Organise (if there are no saved bookmarks), or More... .
4 Select Go to enter the Saved Pages folder.
5 Select a saved page and press Ok. The display shows the saved page. Depending on the saved
page, you may browse the web from here.
Disabled Packet Data Service
If there is no Packet Data Service, your radio displays Error:No Network Available when entering the
browser for the first time. Select left SOFT key to retry entering, or right SOFT key to enter the browser
menu.
When re-entering the browser with previously available Packet Data, the radio displays the last
browsed page, or the last page to which you navigated off-line.
Disabled Browser Entry
Browser entry is disabled:
•
During any type of voice call, except Ambience Listening Call
•
In DMO Mode
•
During Emergency Mode
•
During PIN lock
•
Service provider has not configured this feature
•
When the radio is disabled
NOTICE:
•
Browser entry is enabled during Ambience Listening (AL) Call. If you navigate to previously
stored pages, the AL state remains.
•
When you activate Packet Data for the first time, AL is disconnected, and you have the
same look and feel as if you were not in AL before.
Keys Usage
When the browser is active, the following usage described occurs inside or outside the editor.
Send Feedback
123
Chapter 6: Features
Table 21: Browser Keys Usage
Key Press
Action
0–9 key
In the editor: enters a digit and/or character depending on the text entry mode selected.
Outside the editor: in a numbered list, selects
the required item list.
0–9 key (hold)
In the editor: standard use.
Outside the editor: hotkey for navigating to the
numbered bookmark.
* key (press or hold)
In the editor, inserts a space.
# key (press or hold)
Brings up the Text Input pane, while in editor. Otherwise, sounds a wrong key press.
Left or right SOFT key
Selects the option that appears in the display directly above the left and right soft key (part of the
page).
Up NAVIGATION key
While in list of options, moves up one line.
Up NAVIGATION key (hold)
Moves up on page.
Down NAVIGATION key
While in list of options, moves down one line.
Down NAVIGATION key (hold)
Moves down on page.
Left NAVIGATION key
Moves to the previous pane.
In the editor: moves left.
Left NAVIGATION key (hold)
Functions as backward.
Right NAVIGATION key
Moves to the next pane.
In the editor: moves cursor to the right and inserts space if at the end of the word.
Right NAVIGATION key (hold)
Functions as forward.
Center of NAVIGATION keys (hold)
Auto-repeat.
MENU key
Brings up the browser menu.
END key
Press to deactivate the browser.
SEND key
Disabled in browser active state.
ROTARY KNOB
Used for volume adjustment only.
EMERGENCY button
Deactivates the browser. The radio enters Emergency Mode.
Browser Menu Panes Overview
The browser menu includes the following panes:
Table 22: Browser Menu Panes
Menu Pane
Description
Navigate
Provides access to the home page and commonly used items.
Table continued…
124
Send Feedback
Chapter 6: Features
Menu Pane
Description
Bookmarks
Provides access, editing, and storage options to stored bookmarks and
saved pages.
History
Provides access to recently visited pages and shows the position of the
currently loaded page in the history stack.
Tools
Provides access to applications and utilities.
The following panes are displayed according to the context:
Table 23: Additional Menu Panes
Menu Pane
Description
Options
Displayed only when there are additional options for the pane or page.
Image
Displayed only when an image is selected. Provides access to image details, storage, and display use.
Input Text
Displayed only in text entry mode. Provides access to text entry mode (for
example: symbol).
Navigate Pane
You can select one of the following items:
•
Home — for loading the home page.
•
Open Page — for entering the URL.
•
Search — item disabled.
•
Mark Page — for creating (saving) a bookmark for the current document. A title and URL for the
bookmark are displayed, and the root folder is chosen for the location.
•
Forward — for navigating to the document located one step forward in the navigation history. If
there is no forward history, this item is disabled.
•
Reload — for reloading the current document.
•
Advanced... — see following section.
Advanced...
From the Navigation pane select Advanced... to see the following options:
•
Settings...
Downloads — for setting download preferences. You may deactivate the downloading of
images and objects. The browser displays a special icon instead of the images and objects.
Scroll Mode — for setting the scrolling mode and speed.
Key Press Timeout — for setting key press time-out. This time-out is used for text entry.
Set Proxy — select the WAP Proxy (1, 2, 3). The browser connects to the web via the selected
proxy or gateway. The network provider installs and configures the proxy. To establish a secure
session, select a secure proxy. Please ask your service provider which proxy is configured for a
secure session. Though you can choose your home page, the service provider may decide to
force its own home page on your terminal.
Circuit Prompt — for turning on/off the circuit prompt.
Resend Data Prompt — for turning on/off the data re-send prompt.
Send Feedback
125
Chapter 6: Features
•
Security...
Secure Prompt — for enabling/disabling the browser to inform you that it replaced a non-secure
connection with a secure connection, and the other way around.
Current Certificate — for viewing the digital certificate identifying the server that delivers the
current document. A Certificate Authority (CA) digitally signs and thus authenticates this
certificate. Up to ten additional custom WTLS certificates can be added to the default list of
certificates installed. Please ask your service provider if you wish to have these custom WTLS
certificates added.
CA Certificates — for viewing the digital certificates installed in the browser and digitally signed
by Certificate Authorities (CA).
Send Referrer — for turning ON/OFF sending of the HTTP Referrer header as part of HTTP
requests. The Referrer header provides the URL of the link source to the server.
Authentication — for turning ON/OFF the caching of HTTP Authentication credentials. HTTP
Authentication protects access to content on the server. If you try to access a protected content,
you enter your credentials (user name or password).
•
Clear... — for clearing of browser data: history, cache cookies, or auto-fill.
•
Restart Browser — for restarting the browser.
•
About... — for showing the information about the current version of Openwave Mobile Browser.
Bookmarks Pane
If there are bookmarks in the root folder, select More... to access the Options pane. If the root folder is
empty, select Organise... then press MENU key to access the Options pane. The Options pane allows
you to manage bookmarks. The Saved Pages folder contains snapshots of saved pages.
Working with the Options Pane for Selected Bookmarks
Procedure:
1 From the Bookmarks pane select More... .
2 Scroll to a bookmark.
3 Press MENU to open the Options pane for that bookmark.
4 Select one of the following:
•
Back — for displaying the page associated with the bookmark (page is downloaded if not
available in cache).
•
Details — for modifying the bookmark title and URL.
•
Delete — for deleting the bookmark.
•
New Bookmark — for creating a new bookmark.
•
New Folder — for creating a new folder.
•
Move — for moving this bookmark to a new folder (or in Bookmarks).
•
Delete All — for deleting all bookmarks.
•
Hotkeys — for assigning hotkeys to available bookmarks.
Working with the Saved Pages Folder
Procedure:
1 From the Bookmarks pane select Saved Pages folder.
126
Send Feedback
Chapter 6: Features
2 The browser displays the page (snapshot) saved using Save Page in Tools pane.
3 Scroll to a saved page.
4 Press Menu to open the Options pane for the saved page.
5 Select one of the following:
a Back — for displaying this page saved on its cache.
b Details — for modifying the page title and URL of the saved page.
c Update Page — for replacing the saved version with the current version (to be downloaded
from server).
d Delete — for deleting this page from its cache.
e Delete All — for deleting all the saved pages from its cache.
Cancel — for exiting this pane and returning to the last page displayed.
History Pane
This pane displays the list of recently visited pages (up to nine history entries can be listed). Each
history entry shows its title, if present. Otherwise, No Title is displayed.
Navigating to Recently Visited URLs
Procedure:
1 Select the URL.
2 Press Ok.
Tools Pane
Procedure:
1 From the Tools pane select More...
2 Scroll to a document.
3 Select MENU key to open the Options pane for that document.
4 Select one of the following:
•
Show URL — For displaying the current page URL.
•
Save Page — For creating a snapshot for the current document.
•
Find Text — For finding a text string in the current document.
•
Copy Text — For copying text from the current document to the clipboard.
Options Pane
This pane is specific to the page or pane being displayed.
Image Pane
This pane appears in the browser menu when you enabled the download of images through Navigate
pane > Advanced... > Settings... .
The following items are available:
•
Save — for saving the image in the terminal.
Send Feedback
127
Chapter 6: Features
•
[Send] — for sending the image to the destination of your choice.
•
Reload — for reloading the image.
•
Details — for displaying the image details.
•
Show Image — for showing the image on its own page.
Text Input Pane
Prerequisites: This pane is visible when the browser menu is opened and text entry field is active.
When and where to use: To input the text for the URL.
Procedure:
1 Select the URL.
2 Press abc.
The text input pane opens up.
3 Select www.
4 Scroll the required extension (for example: .com).
5 Press .com. The screen displays the URL with the selected extension.
Table 24: Browser Text Input Icons
Mode
Soft Key
Action
Alphabetic characters - lower
case
abc
Enter text in lowercase.
Alphabetic characters - upper
case
ABC
Enter text in uppercase.
Numeric
123
Enter numbers and symbols.
http mode
www
Enter
Call-Out
This feature allows you to receive Call-Out alerts. On receiving the Call-Out messages, the radio
interrupts current services and attends to the Call-Out alert without any further delay. After call-out alert
has been cleared, the radio exits Call-Out mode and reverts to normal mode. During Call-Out mode
you are only able to receive Emergency Calls.
NOTICE: To read an entire Call-Out message, scroll down the screen by pressing the down
key. The length of the message is indicated by the vertical red bar on the left of the
screen.
NAVIGATION
Figure 5: Call-Out Message
128
Send Feedback
Chapter 6: Features
NOTICE: This is a selling feature.
Related Links
CO Box on page 74
Types of Call-Out Alerts
There are four types of the Call-Out alerts:
•
Normal Call-Out – an alert message that is sent by a dispatcher either to a single radio or to a group
of radios.
•
Storm Plan – an alert message that is sent by a dispatcher to a group of radios. To raise its
reliability, it is sent several times. You are not able to respond to the Call-Out alert and any key
press takes you to the information phase.
•
Fallback Mode – an alert message that is limited only to voice communication. To initiate this type
of Call-Out, press a One-Touch key predefined by your service provider. It can be cleared manually.
NOTICE: Fallback is only possible when the radio is in Local Site Trunking.
•
Test Call-Out – a special Call-Out alert that is sent by the dispatcher to test this feature. On
receiving the Test Call-Out, the radio plays a tone and displays Test Call-Out. To respond and
clear the alert, press the Test OKSOFT key.
Call-Out Modes Interaction
Call-Out feature operation is different in other modes:
•
TXI Mode — you can read the message but you cannot respond to it. You have an option to leave
the TXI Mode by pressing soft key or reject the Call-Out message.
•
DMO Mode — Call-Out is not supported.
•
Emergency Mode — all Call-out alerts are ignored.
Call-Out Service Phases
In the Call-Out mode there are following phases:
•
Alerting phase — receives a Call-Out message. The alarm tone indicates the message. Text is
displayed and you have following options to use: Accept, Reject or MENU. If you accept the alert, no
other service from this point can interrupt.
NOTICE: You can stop the alert tone by pressing PTT or any of the soft keys.
•
Information phase — you are still in the Call-Out mode and you can receive more detailed
information about the incident that occurred through subsequent text or the voice message. You
can query for more information using voice group call or Call-Out text function which enables you to
send a text message. You can always respond and send back the text or the voice message using
voice group call.
Send Feedback
129
This page intentionally left blank.
Tones
Appendix A
Tones
NOTICE: The radio has two tone packs – Classic Tones (default) and New Tones. Your service
provider decides which tone pack is enabled. To listen to the audio signal tones samples, click
Table 25: Radio Tones
New Tone
Classic Tone
Tone Description
Default Beep – Played when pressing a key.
Invalid Action
Examples:
•
Pressing an invalid key.
•
Dialing an invalid number.
•
Talk prohibit.
System Notification
Examples:
•
The radio changed its status from out-of-range to in service.
•
The radio returned to the home network.
•
Toggling between the TMO and DMO modes.
System Error
Examples:
•
The radio changed its status from in service to out-of-range.
•
Call disconnected.
General Notification
Examples:
•
Entering Local Site Trunking.
•
Entering the Transmit Inhibit Mode.
Positive Notification – Message sending succeeded.
Negative Notification – Message sending failed.
Item Received – A new message received.
Talk Permit – The radio user is allowed to transmit their message
(after pressing the PTT button).
Clear-to-send – Data transmission ready to begin.
Emergency – The Emergency Call received.
Table continued…
Send Feedback
131
Appendix A: Tones
New Tone
Classic Tone
Tone Description
Emergency 2 – The Emergency Call received (optional tone)
Low Battery – The battery charge level is low.
Over the Air 1 – Single D-PTT tone.
Over the Air 2 – Double D-PTT tone.
Over the Air 3 – Triple D-PTT tone.
Phone Busy – The called radio is busy.
Phone Ring Back – Played on the initiating phone when the Phone
Call is being setup.
Private Ring Back – Played on the initiating phone when the Private
Call is being setup.
Ringtone 1.
Ringtone 2.
Ringtone 3.
Ringtone 4.
Ringtone 5.
Simplex Volume Set – Played when adjusting simplex volume.
Duplex Volume Set – Played when adjusting duplex volume.
132
Send Feedback
LED Indications
Appendix B
LED Indications
Table 26: LED Indications
Indication
Status
Solid green
In use
Battery fully charged
Blinking green
In service
Battery charged at 90%
Solid red
Out of service
Rapid charge
Trickle charge
Blinking red
Connecting to the network
Entering DMO
Faulty or invalid battery
Solid orange
Transmit inhibit in service
Channel busy in DMO
Blinking orange
Incoming call
Battery is waiting to charge
No indication
Radio in Covert Mode
Radio powered down
Send Feedback
133
This page intentionally left blank.
Troubleshooting
Appendix C
Troubleshooting
Your radio displays the following messages:
Table 27: Displayed Messages
Message
Message Description
...-Received
Call received but not answered, or rejected.
Attachment Failed
Your radio could not perform talkgroup attachment. It keeps on
trying. If it does not succeed, try another talkgroup.
Authenticate Failure
Your radio could not register on an authenticated system (for
example, the Authentication Key is incorrect, or authentication
is disabled).
Battery level too low.
The battery charge level is too low to perform the required operation.
Call Cancelled
You have canceled the call.
Call Ended
•
Faulty channel. Please try later.
•
You have ended the call.
Call Forwarding
The radio you are trying to call is not available and the call is
being forwarded to another radio.
Call Modified
The call you are participating in has been modified.
Call Preempted
Channel being used for priority.
Decryption Failed:
An error occurred while decrypting a message or call.
Emergency In Use
The Hot Microphone feature is active, but the channel transmit
grant has been given to another Emergency call on the same
talkgroup. Your radio microphone is not active during this time,
but it automatically tries to regain talk permit after a predetermined time.
Wait For Mic
Emgcy Mic Ended
The Hot Microphone timer automatically expired, or you pressed the PTT button to cancel the Hot Microphone feature.
Emergency Mic On
The Hot Microphone feature is active, and your radio is automatically transmitting hands free emergency audio.
Empty Entry
The speed number you dialed does not exist, or the number
exists but the group is non-selectable.
Faulty Unit
Error
Self-test failed. An operational fault has been detected with
your radio. Record the error number. Turn your radio off and
contact service.
Gateway available
Your radio has connected to a gateway.
Gateway not available
Your radio cannot connect to a gateway, or connection has
been lost.
Table continued…
Send Feedback
135
Appendix C: Troubleshooting
Message
Message Description
This group already exists
The group you are attempting to add exists in the My Groups
folder.
Individual Calls Only
You can make only individual (private) calls.
Insufficient visible data
Your radio is in the process of determining your location. This
process may take several minutes to complete.
Insufficient visible satellites
Your radio is in the process of determining your location. This
process may take several minutes to complete.
Invalid ID
The entered number is not valid.
Invalid Shortcut Position
The entered number is not valid.
Limited Service
Emergency Calls, Emergency Alarms, and mobility operations
(for example group attachment) are allowed. All other incoming
and outgoing call and data services are blocked.
List Empty
There are no programmed entries in the scrolling list. Type the
entry.
List Not Attached
All talkgroups in the scan list are not attached.
List Partially Attached
The scan list is active, but not all talkgroups are attached to it.
Message Delivered
Indicates mail successfully delivered.
Message Failed
Indicates mail delivery failure.
New Delivery Status
You have received a new Delivery Status.
No Service
Your radio is outside coverage. Return to coverage.
Not allowed in repeater mode
The service or feature is not available in the Repeater Mode..
My Groups
You cannot view/delete groups when the My Groups folder is
empty.
Is Empty
My Groups
Is Full
You are not allowed to add a group to the My Groups folder
as it already contains the maximum allowed number of groups.
Network Trouble
Network problems. Please try again later.
No Answer
The called party does not answer.
No Entries
This message is displayed when accessing an empty list.
No Group
•
Attachment failed. Your radio detached from current talkgroup. Please wait until it attaches again to the current talkgroup.
•
Displayed when you are out of the normal coverage area of
your selected talkgroup. Please select a new talkgroup that
is valid for your working location.
•
Indicates a favorite group was removed from the My
Groups folder.
No List
The network list is empty.
No New or Old Messages
Indicates there are no new or old messages in the Inbox.
Table continued…
136
Send Feedback
Appendix C: Troubleshooting
Message
Message Description
No Selected Scan List
You selected an empty network list.
No Service
Your radio is out of coverage.
Not Allowed To Initiate Call
You are not allowed to dial a number which is not in the address book.
Not Allowed To Transmit
Release the PTT button and try again later. You are not allowed to send a text message or a status message to a number which is not in the address book.
Single TalkGroup Only
There is only one programmed entry in the scrolling list.
Overheating, Please Turn Radio Off
Your radio turns off. Keep it turned off for 5 minutes.
Party Busy
Called radio is busy.
Party Not Available
Called radio is out-of-range or turned off. Please try again later.
Please Try Again
You could not call.
Please Wait Connecting
A message during startup.
Registration Failure
Your radio could not register within the system. Please try
again later.
Repeater available
Your radio has connected to a repeater.
Repeater not available
Your radio cannot connect to a repeater, or connection has
been lost.
Service Denied
Invalid number. Call your service provider.
Service Not Available
This service is not available on the current network.
Service Restricted
This service or feature is restricted by your service provider, it
has not been purchased, or it is not available.
TalkGrp ... cannot be deleted
Your service provider set this group so you cannot delete it
from the favorite talkgroup folder.
Try Again Later
The requested service is temporarily unavailable.
Radio Disabled
Check with your service provider.
Unit is OK
Self-test error. A minor fault has been detected. Your radio is
still fully operative. If this error recur, note the error code and
contact service.
Warn:
Unit Not Attached
You radio could not attach to the system. The talkgroup may
not be defined in the system. Please try another group.
Unassigned Button
The message is displayed when no feature is assigned to a
button.
Send Feedback
137
This page intentionally left blank.
Maintenance
Appendix D
Maintenance
NOTICE:
•
Before using your radio for the first time, remove the plastic lens protector from the display,
and charge the battery until the LED lights green.
•
Battery charging must occur only in non-hazardous areas.
•
Clean the connector frequently and before the programming procedure for example, with a
soft brush (do not use fluids).
Storage
•
Do not store the battery where the temperatures exceed +65 °C or fall below -20 °C.
•
New Lithium-Ion batteries may be stored in ventilated, cool and dry areas with some capacity loss in
the life cycle.
•
It is not recommended to store the batteries when they are fully charged or discharged.
Extending Battery Life
A battery is an expendable part and may need replacing during the life of the radio. To ensure
maximum service life of your radio, always replace the battery with a genuine Motorola replacement. In
order to ensure maximum life for your battery:
•
Do not charge it unless necessary (low battery indication).
•
Charge it until full charge indication is on.
Battery Charging Temperature
Your charger only charges your battery when it is at temperature range of 1 °C to 37 °C. As the
temperature gets colder (close to 0 °C) less capacity is stored in the battery.
If, during charging, the temperature is out of range, the battery might not be fully charged since the
charging is temporarily stopped until the temperature becomes suitable. The temperature range of
battery operation is from 0 °C to +45 °C in charger mode and from -30 °C to +60 °C in discharge mode.
Battery Charging Rules
Generally, to reduce the number of charge cycles as much as you can, wait for the to charge, as it
ensures maximum battery life. Do not use your charger as a radio holder or leave your radio and fully
charged battery connected to the charger while not charging. Continuous charging shortens the battery
life.
Additional Battery Warnings/Cautions
•
Battery storage above 60 °C and below -20 °C is not recommended.
•
To prevent injury, do not allow metal objects to touch the battery contacts.
•
Do not disassemble.
•
Do not throw in fire.
Send Feedback
139
Appendix D: Maintenance
•
Do not dispose of battery in household waste.
NOTICE: When the battery is deeply discharged (for example after left unattended for months
while connected to the radio), it cannot be recovered in all types of chargers. It is best
recovered:
•
In the rear pocket of a Dual Unit Charger.
•
In a battery only pocket on a Multi-Unit Charger.
•
By charging the radio with the USB cable.
Looking after Your Radio
Never leave your radio or battery in extreme temperatures (over +85 °C), for example, behind a
windscreen in direct sunlight.
Do not immerse your radio in water.
To clean your radio, use a moistened or antistatic cloth.
140
Send Feedback

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Motorola Solutions
Create Date                     : 2015:03:16 10:53:31-06:00
Modify Date                     : 2015:03:17 10:46:26+01:00
Has XFA                         : No
Language                        : EN
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Motorola Solutions
Title                           : MTP3250 Feature User Guide - USA and Canadian version
Creator Tool                    : AH XSL Formatter V6.1 R1 for Windows (x64) : 6.1.5.11330 (2013/05/23 13:33JST)
Metadata Date                   : 2015:03:17 10:46:26+01:00
Producer                        : Antenna House PDF Output Library 6.1.402 (Windows (x64))
Trapped                         : False
Document ID                     : uuid:e19f6529-daaa-4888-818b-749c8ede6e7f
Instance ID                     : uuid:23602352-4865-4061-9bae-32f6b6a62da9
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 140
Warning                         : [Minor] Ignored duplicate Info dictionary
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AZ489FT5868

Navigation menu