Motorola Solutions 89FT6015 Wireless RSM (Remote Speaker Mic) User Manual Manual

Motorola Solutions, Inc. Wireless RSM (Remote Speaker Mic) Manual

Manual

WIRELESS RSM FORPORTABLES SOLUTIONSUSER GUIDEACCESSORIESPMMN4096 WIRELESS REMOTE SPEAKER MICROPHONEPMLN6714 DUAL-UNIT CHARGER PMLN6716 VEHICULAR CHARGER PMNN4461 WIRELESS REMOTE SPEAKER MICROPHONE BATTERY en-US fr-CA es-LA pt-BR ko-KR de-DEfr-FR it-IT nl-NL pt-PT ru-RU uk-UAes-ES
BackCover.fm Page 1 Wednesday, November 9, 2016 11:11 AM
FOREWORDEnglishiCHAPTER 1: FOREWORDImportant Safety InformationRF Energy Exposure and Product Safety Guide for Portable Two-Way RadiosATTENTION! This radio is restricted to Occupational use only.Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations.For a list of Motorola Solutions-approved antennas, batteries, and other accessories, visit the following website:http://www.motorolasolutions.com/APXUnder Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.Notice to Users (FCC and Industry Canada)This device complies with Part 15 of the FCC rules and Industry Canada's license-exempt RSS's per the following conditions:•This device may not cause harmful interference.•This device must accept any interference received, including interference that may cause undesired operation.•Changes or modifications made to this device, not expressly approved by Motorola, could void the authority of the user to operate this equipment.
http://www.motorolasolutions.com/en_us.html">
FOREWORDEnglishiiConsignes de sécurité importantesRadios bidirectionnelles portatives : exposition aux radiofréquences et sécurité du produitATTENTION!Cette radio ne doit être utilisée qu'à des fins professionnelles. Avant d'utiliser la radio, lisez le guide Radios bidirectionnelles portatives : exposition aux radiofréquences et sécurité du produit, qui contient d'importantes instructions de fonctionnement pour une utilisation sécuritaire et des informations sur l'exposition aux fréquences radioélectriques, dans le but d’assurer votre conformité aux normes et règlements en vigueur.Visitez le site Web suivant pour obtenir la liste des antennes, des batteries et des autres accessoires approuvés par Motorola :http://www.motorolasolutions.com/APXSelon la réglementation d'Industrie Canada, cet émetteur radio ne peut être utilisé qu'avec une antenne dont le type et le gain maximal (ou minimal) sont approuvés par Industrie Canada pour cet émetteur. Afin de limiter les interférences radio pour les autres utilisateurs, le type et le gain de l'antenne doivent être choisis de façon à ce que la puissance isotrope rayonnée équivalente (P.I.R.E.) ne soit pas plus forte qu'il ne le faut pour établir la communication.Avis aux utilisateurs (FCC et Industrie Canada)Cet appareil est conforme à la partie 15 des règles de la FCC et d'Industrie Canada permis exemptés RSS de par la conditions suivantes:•Ce dispositif ne doit pas causer d'interférences nuisibles.•Cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent perturber le fonctionnement.•Les changements ou les modifications apportées à ce dispositif, non expressément approuvées par Motorola, peuvent annuler le droit de l'utilisateur à utiliser cet équipement.
http://www.motorolasolutions.com/en_us.html">
FOREWORDEnglishiiiBattery Information:Battery is shipped with a nominal charge between 30% and 50%. Battery should be stored between -10 °C (14 °F) and 30 °C (86 °F) to minimize permanent capacity loss.CAUTION: Storing your fully charged accessory in high-temperature conditions may permanently reduce the life of the internal battery.Important Information:•Hold the microphone in a vertical position with the microphone at least one inch (2.5 centimeters) away from the nose or lips.•Body Worn Operation. When microphone is worn on the body, always use Motorola-approved clip for this product. Using approved body-worn accessories is important because the use of non-Motorola-approved accessories may result in exposure levels, which exceed the FCC occupational/controlled environment RF exposure limits.•Use only Motorola-approved supplied or replacement batteries. Use of non-Motorola-approved batteries may exceed the applicable RF exposure guidelines (iEEE, ICNIRP or FCC).•DO NOT charge your accessory in temperatures below 0 °C (32 °F) or above 45 °C (113 °F). DO NOT store your accessory in direct sunlight or where expected temperatures can exceed this range such as inside a parked car.•Storing your fully charged accessory in high-temperature conditions may permanently reduce the life of the internal battery. •Battery life may temporarily shorten in low-temperature conditions.Acoustic SafetyExposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.To protect your hearing:•Use the lowest volume necessary to do your job. •Turn up the volume only if you are in noisy surroundings. •Turn down the volume before adding headset or earpiece. •Limit the amount of time you use headsets or earpieces at high volume. •When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.CHARGERS SAFETY INFORMATIONImportant Safety InformationThis document contains important safety and operating instructions. Please read these instructions carefully and save them for future reference.Before using the battery charger, read all the instructions and cautionary markings on (1) the Dual-Unit Charger / Vehicular Charger, (2) the battery, and (3) on the Wireless Remote Speaker Microphone (WRSM).
FOREWORDEnglishivWARNINGS NOTE: The Dual-Unit Charger is not designed to accommodate the alkaline battery tray.OPERATIONAL SAFETY GUIDELINESDual-Unit Charger PMLN6714_•This equipment is not suitable for outdoor use. Use only in dry locations/conditions.•Ensure the WRSM with attached battery or battery alone is dry before inserting into the Dual-Unit Charger.•Connect equipment only to an appropriately wired power supply of the correct voltage (as specified on the product). Disconnect from line voltage by removing main plug.•The socket outlet to which this equipment is connected should be close by and easily accessible.•Maximum ambient temperature around the Dual-Unit Charger equipment must not exceed 50 °C (122 °F).•Output voltage from the power supply unit must not exceed the ratings stated on the product label located on the power supply.•Make sure the cord is located where it will not be stepped on, tripped over, or subjected to water, damage, or stress.!W A R N I N G!2. Use of accessories not recommended by Motorola may result in risk of fire, electric shock, or injury.3. To reduce risk of damage to the electric plug and cord of the DUC, pull by the plug rather than the cord when disconnecting the charger.4. To reduce risk of damage to the CLA and cord of the Vehicular Charger, pull by the CLA rather than the cord when disconnecting the charger.5. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in risk of fire and electric shock. If an extension cord must be used, make sure that the cord size is 18 AWG for lengths of up to 100 feet (30.48 m), and 16 AWG for lengths up to 150 feet (45.72 m).6. To reduce risk of fire, electric shock, or injury, DO NOT operate the charger if it has been broken or damaged in any way. Take it to a qualified Motorola service representative.7. DO NOT disassemble the charger – it is not repairable and replacement parts are not available. Disassembly of the charger may result in risk of electric shock or fire.8. To reduce risk of electric shock of the DUC, unplug the charger from the AC outlet before attempting any maintenance or cleaning.9. To reduce risk of electric shock of the Vehicular Charger, unplug the Vehicular Charger from the CLA power source before attempting any maintenance or cleaning.10. This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.1. To reduce risk of injury, charge only the rechargeable Motorola authorized batteries listed in Table 1.1. Other batteries may explode, causing personal injury and damage.Table 1.1: Motorola Authorized BatteryKit (Part) Number Platform/DescriptionPMNN4461_ Battery Standard Li-Ion 1750M1880T
FOREWORDEnglishvVehicular Charger PMLN6716_•Equipment shall be used in vehicle and in dry condition. Keep in mind that rain or snow can reach the equipment i.e. through an open vehicle window.•Ensure the WRSM with attached battery or battery alone is dry before inserting into the Vehicular Charger.•Connect equipment only to an appropriately vehicle’s cigar lighter socket of the correct voltage (as specified on the product). Disconnect from line voltage by removing the CLA.•Maximum ambient temperature around the Vehicular Charger equipment must not exceed 60 °C (140 °F).•Output voltage from the vehicle’s cigar lighter socket unit must not exceed the ratings stated on the product label located at the back of the charger.•Make sure the cord is located where it will not be stepped on, tripped over, or subjected to water, damage, or stress.RADIO COMPATIBILITYThe Wireless Remote Speaker Microphone (WRSM) is compatible with the radios listed below:Table 1.2: Radios CompatibilityKit (Part) Number Platform/DescriptionNorth AmericaXPR7550, XPR7580, XPR7350, XPR7380, XPR7550e, XPR7580e, XPR7350e, and XPR7380eLatin America DGP8550e, DGP5550e, DGP8050e, DGP5050e, and DGP8050eEuropeanDP4801e, DP4601e, DP4401e, DP4801, DP4601, DP4401, DP3441e, and DP3661eAsia Pacific and Middle EastDP4801e, DP4601e, DP4401e, DP4801, DP4601, DP4401, DP3441e, and DP3661e
FOREWORDEnglishviWAVE 5000 MOBILE CLIENT AND RADIO CONFIGURATIONBy default, the WRSM is compatible with the radio ONLY. To work with WAVE 5000 Mobile Client, choose WAVE 5000 on Operation Mode at Accessory Programming Software (APS).WAVE5000 Mobile Client Android Application Package (APK) version TBD and above must be used for compatibility with the WRSM. This can be configured using the APS tool.The APS tool allows you to select two modes of operation:•Radio mode – configuring the WRSM to be used with your radio. Refer to Table 1.2 for radios compatible to the WRSM.•Wave5k mode – configuring the WRSM to be used with the Wave 5000 Mobile Client on a smartphone.
WIRELESS RSM PMMN4096_English1CHAPTER 2: WIRELESS RSM PMMN4096_PREPARING YOUR WRSM FOR USEAssemble your WRSM by following these steps:Assembling the Swivel Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2Attaching the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2Detaching the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4Recommended Wearing Positions. . . . . . . . . . . . . . . . . . . . . . . page 5
WIRELESS RSM PMMN4096_English2Assembling the Swivel ClipInsert the swivel clip through the battery slot. Rotate the clip to the right position as indicated in Figure 2.1 below.Figure 2.1: Assembling the swivel clipAttaching the BatteryWith the WRSM turned off, align the battery to back chassis and fully slot in until the battery latch is engaged.Figure 2.2: Attaching the battery into the WRSM2112
WIRELESS RSM PMMN4096_English3Detaching the BatteryTo detach the battery, lift up the battery latch and pull the battery backward until the battery is fully disengaged from the back chassis.Figure 2.3: Removing the battery from the WRSMCharging the BatteryFigure 2.4: Charging position of the WRSM with battery attached12LED STATUS INDICATORSReady>90%CAUTIONChargingStandbyRISK OF FIRE. REFER TO MANUAL FOR BATTERY TYPEUnable to Charge
WIRELESS RSM PMMN4096_English4The Motorola-approved battery shipped with your WRSM is uncharged. Prior to using a new battery, fully charge the new battery to ensure optimum capacity and performance.NOTE: When charging a battery attached to a WRSM, turn the WRSM OFF to ensure a full charge.Battery ChargerTo charge the battery, place the battery, with or without the WRSM, in a Motorola-approved charger. When initially inserting the battery into the charger, the charger’s LED will turn red. DO NOT use WRSM until the charger’s LED turn Green, The charger’s LED indicates the charging progress; see Chapter 3 and Chapter 4 or the label printed on the charger.Align the slot of the battery with the charger’s rail and slot in. Refer to Figure 2.4.Language SelectionFollow the procedure below if you want to reset to your desired language. Ensure that the WRSM is powered OFF before starting this procedure.Procedure:1Press and hold the PTT button before powering ON the WRSM. DO NOT release the PTT button.2Continue holding the PTT Button after clearing the Bluetooth Information (refer to Pairing Your WRSM) until you hear the language selection prompts to enter the language selection feature. 3Select your desired language by pressing the PTT button. Refer to Table 2.1 below for the Language Selection Indicators.To avoid a possible explosion:•DO NOT replace the battery in any area labeled “hazardous atmosphere”.•DO NOT discard batteries in a fire.!W A R N I N G!Table 2.1: Language Selection IndicatorsState Power Indication LED Voice PromptLanguage Selection LED illuminated“For English press PTT now” (Menu selection prompts)
WIRELESS RSM PMMN4096_English5Figure 2.5: Language SelectionRecommended Wearing PositionsFor optimum performance, wear the WRSM as highlighted in Figure 2.6 below.Figure 2.6: Recommended wearing positionsNOTE: When the WRSM is worn on the body, always use Motorola-approved clip. Using approved body-worn accessories is important because the use of non-Motorola-approved accessories may result in exposure levels, which exceed the FCC occupational/controlled environment RF exposure limits.12Push-to-Talk (PTT) ButtonPower Button / Multi Function Button (MFB)
WIRELESS RSM PMMN4096_English6IDENTIFYING WRSM INDICATORS AND CONTROLSTake a moment to review the following:Overview of the WRSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6Power Indicators and Battery Alerts . . . . . . . . . . . . . . . . . . . . . page 7Audio Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7Overview of the WRSMFigure 2.7: Wireless Remote Speaker Microphone OverviewAudio Indicator12Programmable Button (Orange Button)Audio Jack3Microphone4Speaker5Tasklight6Tasklight Button7Push-to-Talk (PTT) Button8Power Indicator910 Power Button / MFB11 Volume Toggle
WIRELESS RSM PMMN4096_English7Power Indicators and Battery AlertsThe WRSM is battery powered. It is very important to pay attention to the low battery warning described in Table 2.2 to avoid improper functioning of the WRSM.Audio IndicatorsTable 2.2: Power Indicators and Battery AlertsState Power Indication LED Tone Indication Remaining Battery LifeNormal BatteryGreenNo tone11 hours (full charged) – 30 minutesLow BatteryAmberLow Battery tone every 2 minutesLess than 30 minutesCritical BatteryRedLow Battery tone every 30 secondsLess than 10 minutesTable 2.3: Audio IndicatorsState Audio Indication LEDAudio Not Available,Device Not PairedOFFAudio Available,Good SignalBlue BlinkAudio Available,Poor Signal / Edge of RangeAmber BlinkAudio Available,MutedRed BlinkAudio Not Available,Disconnected / ReconnectingBlue SolidAudio Not Available,Disconnected / Reconnecting and Muted Red Solid
WIRELESS RSM PMMN4096_English8GENERAL WRSM OPERATIONOnce you understand how your WRSM is configured, you are ready to use your WRSM. Use this navigation guide to familiarize yourself with the basic features: Powering ON/OFF the WRSM . . . . . . . . . . . . . . . . . . . . . . . . . page 8Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9Pairing Your WRSM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9Subsequent Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10Poor Signal / Out Of Range Warning Indication . . . . . . . . . . . page 10Programmable Button (Orange Button). . . . . . . . . . . . . . . . . . page 11Tasklight Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11Dark Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11Secondary Receiver Audio Accessory. . . . . . . . . . . . . . . . . . . page 12Failure Detected Indication and Handling . . . . . . . . . . . . . . . . page 13Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13Firmware Upgrade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13Powering ON/OFF the WRSMTo power ON the WRSM, press and hold the Power Button until you hear “Motorola Solutions” prompt. To power OFF, press the Power Button until the WRSM turns off.Figure 2.8: Powering on your WRSMTable 2.4: Power ON/OFF LED and Tone IndicatorsPower Power Indication LED Tone Indication Voice PromptON LED blinks 3 times “Motorola Solutions”“Motorola Solutions, Power On”OFF LED blinks 3 times then OFF Power Off tone “Power Off”Power ButtonPower Indicator
WIRELESS RSM PMMN4096_English9Volume ControlTo increase the volume, push volume lever towards the . To decrease the volume, push lever towards the .To mute, hold lever to the for 2 seconds. To unmute, push lever to the or press the PTT button. Volume returns to the previous level.Figure 2.9: Volume ControlThe color of the Audio Indicator LED changes according to Table 2.3 on page 7.Pairing Your WRSMProcedure:1Verify that both the host and the WRSM are powered ON (First time only: Once the WRSM is powered ON, if not previously selected, the WRSM will instruct the user to select language or tone, and then it goes into Pairing Mode automatically.).2Both the WRSM and wireless host must be within pairing range (recommended pairing range is within 1 meter).3Once the devices are paired successfully, a “Pairing Successful” tone or “Connecting” voice prompt is played on the WRSM.4Press the MFB button to start the connection process when you hear the “Ring” tone indicating Host is requesting for connection. 5Wireless Link Connected with Host indication is provided upon successful link establishment (refer to Table 2.5 on page 10).6Your WRSM is now ready to be used.Volume ToggleAudio Indicator
WIRELESS RSM PMMN4096_English10Subsequent ConnectionSame Host:If the Bluetooth link is lost, connection will be automatically reestablished when the host and device come within 10 meter range (line-of-sight).New Host:1Put the wireless device in Pairing Mode by powering ON while pressing the PTT button simultaneously.2Follow steps from Pairing Your WRSM.Poor Signal / Out Of Range Warning IndicationYou will be prompted with the Poor Signal / Ouf Of Range Warning Indication if the WRSM is about to lose the wireless link at Bluetooth fringe area. This warning indication will turn off if the user moves closer or if the signal quality improves.Refer to Table 2.6below for the Poor Signal / Out Of Range Indication:Table 2.5: Wireless Link and Pairing IndicatorsState Indication LED Tone Indication Voice PromptNot Paired Blue LED blinking Pairing Ready tone“Searching for Host”Paired SuccessfullyBlue LED Solid for 2 secondsPairing Successful tone “Connecting”Wireless Link Connected with HostBlue LED Heartbeat: Long OFF and Short ONConnected tone “Headset Connected”Wireless Link Disconnected from HostBlue LED Solid ONDisconnected tone every 2 minutes for 10 minutes“Headset Disconnected”Table 2.6: Poor Signal / Out Of Range Warning IndicatorState Audio Indication LED Tone IndicationPoor Signal / Ouf Of RangeAmber LED illuminated for 2 seconds “Bad Bonk” Tone
WIRELESS RSM PMMN4096_English11Push-to-Talk (PTT) ButtonPress and hold down the PTT button to talk. Release the PTT button to listen. The microphone is activated when the PTT button is pressed.Figure 2.10: Pressing Push-to-Talk ButtonProgrammable Button (Orange Button)This Programmable Button is mapped to the Accessory Orange Button for Portable Radios. Pressing the Programmable Button on the WRSM will trigger the event set in Accessory Orange Button. The Accessory Orange Button is programmable through radio’s Customer Programming Software (CPS). Your radio’s User Guide contains a full description of the programmable functions that are available through this button. Tasklight ButtonPress the Tasklight Button for 1 second to switch ON/OFF the tasklight.During low/critical battery, the Tasklight blinks for 30 seconds and will be auto switched OFF.NOTE: The Tasklight is disabled when WRSM is in Dark Mode. Dark ModeDark Mode allows you to turn OFF the LEDs on the WRSM. IMPORTANT: When the WRSM is in Dark Mode and muted state, all indications will be turned OFF.To activate the Dark Mode feature, follow the steps below:Procedure:1Press and hold the Tasklight Button until Dark Mode is ON. The Tasklight will blink for 1 second upon entering/exiting Dark Mode.2Refer to Table 2.7 below for the Dark Mode Indicators.NOTE: To disable the Dark Mode feature, press the Tasklight Button for 3 seconds.
WIRELESS RSM PMMN4096_English12NOTE: All three LEDs (Power Indicator, Audio Indicator & Tasklight) blink for 1 second and off at the same time when turning ON/OFF the Dark Mode.Secondary Receiver Audio AccessoryWhen a secondary accessory is plugged into the audio jack, audio will be routed through secondary accessoryAttaching Secondary Receiver Audio AccessoryLift up the dust cover and rotate 90 o. Plug the dust cover to the housing slot. Insert the secondary receiver audio accessory to 3.5 mm audio jack.Figure 2.11: Attaching secondary receiver audio accessoryTable 2.7: Dark Mode IndicatorsIndicationPower Indication, Audio Indication and Tasklight LEDTone Indication Voice PromptDark Mode ONLED illuminated for 1 second then OFF“Dark Mode” tone“Lights OFF, Press and hold Tasklight Button to switch lights ON”Dark Mode OFF LED illuminated for 1 second “Dark Mode ” tone “Lights ON”12
WIRELESS RSM PMMN4096_English13Optional AccessoriesNOTE: Some part numbers may have regional prefix such as AA, MD or AZ.Failure Detected Indication and HandlingAny product error is indicated by alternating Red and Green blinks and a failure detected indication (tone / voice prompt) will be heard. A few seconds later the WRSM will recover.TroubleshootingIf at any time the wireless connection cannot be re-established, or the WRSM is operating incorrectly:Procedure:1Power cycle the WRSM and the two-way radio. 2Refer to “Pairing Your WRSM" on page 9” to repeat the connection process.Firmware UpgradeFirmware upgrade is available for this WRSM and it is only upgradeable by your dealer. Check with your dealer for more information on the latest firmware upgrades.NOTE: DO NOT charge the WRSM with this micro USB port, it is strictly for firmware upgrade only.Figure 2.12: Location of the micro USB portTable 2.8: Optional AccessoriesPart Number DescriptionRLN4941_ Earpiece with Coiled Cord and 3.5 mm RT Angle PlugRLN4885_ Receiver Earbud for Remote Speaker MicrophoneMicro USB port
WIRELESS RSM PMMN4096_English14NOTES
DUAL-UNIT CHARGER PMLN6714_English15CHAPTER 3: DUAL-UNIT CHARGER PMLN6714_The Dual-Unit Charger is intended for use with the Motorola-approved Lithium-ion rechargeable batteries (listed in Table 3.1). Both pockets are capable in charging Wireless Remote Speaker Microphone (WRSM) with battery or battery alone.An illuminated LED indicates the state of charge for the first and second pocket.PREPARING YOUR DUC FOR USETake a moment to review the following:Operational Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 24Motorola Authorized Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . page 24Motorola Authorized Power Sources/Power Supplies . . . . . . . page 24Overview of the DUC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 25Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 26LED Light Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 27Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 28
DUAL-UNIT CHARGER PMLN6714_English16Operational Guidelines•Always remember to power ON the Dual-Unit Charger first before inserting the WRSM with the attached battery or battery alone into the pocket. •The Dual-Unit Charger is designed to provide simultaneous charging for both pockets.Motorola Authorized BatteryThe battery listed in Table 3.1 is approved for use with the Dual-Unit Charger.NOTE: The Dual-Unit Charger is not designed to accommodate the alkaline battery tray.Motorola Authorized Power Sources/Power SuppliesThe Power Sources/Power Supplies listed in Table 3.2 are approved for use with the Dual-Unit Charger:* Charger only UL approved when shipped with this power supply. (Applicable for North America region only)Table 3.1: Motorola Authorized BatteryKit (Part) Number Platform/DescriptionPMNN4461_ Battery Standard Li-Ion 1750M1880TTable 3.2: Motorola Authorized Power SupplyPower Supply Kit Number Description25012022001* Power Supply, Charger Switch Mode, 110 – 240 V US/NA/JPN/TAIWAN25012022002 Power Supply, Charger Switch Mode, 110 – 240 V EURO25012022003 Power Supply, Charger Switch Mode, 110 – 240 V UK25012022004 Power Supply, Charger Switch Mode, 110 – 240 V CHINA25012022006 Power Supply, Charger Switch Mode, 110 – 240 V AUS/NZ25012022007 Power Supply, Charger Switch Mode, 110 – 240 V BRZ25012022008 Power Supply, Charger Switch Mode, 110 – 240 V ARG25012022009 Power Supply, Charger Switch Mode, 110 – 240 V KOR
DUAL-UNIT CHARGER PMLN6714_English17Overview of the DUCFigure 3.1: Dual-Unit Charger (Front View) Figure 3.2: Dual-Unit Charger (Side View)PocketLEDsBarrel Connector
DUAL-UNIT CHARGER PMLN6714_English18Operating InstructionsDual-Unit Chargers are intended for use only with the authorized Motorola battery and power supplies listed in Table 3.1 and Table 3.2; usage with unauthorized products may prevent proper operation and may damage the device.The battery charger will accommodate a WRSM with an attached battery or battery alone in either pocket. To charge a battery, use the following procedure:1Plug the power supply cord into the barrel connector on the back of the charger.2Plug the power supply into the appropriate AC outlet. The charger LED will flash single green once to indicate a successful power-up.3Insert a WRSM with battery into the charger’s pocket by:aAligning the groove on each side of the battery with the corresponding raised rail on each side of the charger pocket.bSliding the WRSM with battery into the charger pocket, ensuring complete contact between the charger and battery contacts.4When the WRSM with battery is properly seated in the pocket, the charger LED will light in accordance with Table 3.3.5Insert a battery into the charger’s pocket by:aAligning the slot on each side of the battery with the corresponding raised rail on each side of the charger pocket.bSliding the battery into the charger pocket, ensuring complete contact between the charger and battery contacts.6When the battery is properly seated in the pocket, the charger LED will light in accordance with Table 3.3.NOTE: Charge new batteries overnight to ensure full charge. To minimize charge time, it is recommended to turn the WRSM OFF.The Dual-Unit Charger is not designed to accommodate the alkaline battery tray.Figure 3.3: Charging position of the WRSM on a Dual-Unit ChargerLED STATUS INDICATORSReady>90%CAUTIONChargingStandbyRISK OF FIRE. REFER TO MANUAL FOR BATTERY TYPEUnable to Charge
DUAL-UNIT CHARGER PMLN6714_English19LED Light IndicationWhen troubleshooting, always observe the color of the LED.Table 3.3: Charger StatusLED Indication Charger StateSteady GreenCharged at least 95%Steady RedRapid chargeSingle Flash GreenCharged successfully powered up and is ready for useSlow Flash GreenNearly charged at least 90%Slow Flash AmberBattery under voltage recoveryORBattery temperature is either too hot or too cold – Wait to chargeIf battery temperature is within operating temperature, there may be a fault connection – DO NOT charge batteryFast Flash RedBattery under voltage recovery time outORLoss of charge current controlORExcessive power supply voltageORFault connection happened – DO NOT charge batteryOffIf battery is inserted into a successfully powered up charger, battery may have bad contact with chargerTable 3.3: Charger Status (Continued)
DUAL-UNIT CHARGER PMLN6714_English20TroubleshootingIf There is Fast Flash Red Indication:1Confirm the battery being used with the WRSM is listed in Table 3.1 and is good in condition.2Confirm that the power supply being used with the WRSM is listed in Table 3.2 and is good in condition.3Remove the battery and restart the Dual-Unit Charger.4If the symptom persist, please send the Dual-Unit Charger to the nearest Service Center for further verification. If There is No LED Indication:1Check that the WRSM with battery or the battery is inserted correctly in the pocket.2Make sure that the power supply is plugged into an appropriate AC outlet and the LED on the power supply is on.3Ensure that the power supply cable is plugged securely into the charger socket.4Confirm that the battery being used with the WRSM is listed in Table 3.1.5If the symptom persist, please send the Dual-Unit Charger to the nearest Service Center for further verification.
VEHICULAR CHARGER PMLN6716_English21CHAPTER 4: VEHICULAR CHARGER PMLN6716_The Vehicular Charger is intended for use with the Motorola-approved Lithium-ion rechargeable batteries (listed in Table 4.1 ). The pocket is capable in charging Wireless Remote Speaker Microphone (WRSM) with battery or battery alone. An illuminated LED indicates the state of charging.PREPARING YOUR VEHICULAR CHARGER FOR USETake a moment to review the following:Operational Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 30Operating Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 30Motorola-Authorized Battery . . . . . . . . . . . . . . . . . . . . . . . . . . page 30Overview of Vehicular Charger . . . . . . . . . . . . . . . . . . . . . . . . page 31Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 31Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 32LED Light Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 37Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 38
VEHICULAR CHARGER PMLN6716_English22Operational Guidelines•Always remember to plug in the CLA first before inserting the WRSM with the attached battery or battery alone into the pocket. •The Vehicular Charger is designed to be portable.•The WRSM is designed to be functional even when charging takes place.Operating SpecificationsVehicular ChargerInput voltage range: 10.8 Vdc to 33.0 VdcBattery Charging InterfaceMax Output voltage: 4.20 VdcMotorola-Authorized BatteryThe battery listed in Table 4.1 is approved for use with the Vehicular Charger.Table 4.1: Motorola-Authorized BatteryKit (Part) Number Platform/DescriptionPMNN4461_ Battery Standard Li-Ion 1750M1880T
VEHICULAR CHARGER PMLN6716_English23Overview of Vehicular ChargerFigure 4.1: Overview of the Vehicular ChargerInstallationInstall Mounting Bracket (HLN9073_)Refer to Figure 4.2 below and attach hang-up clip (1) to vehicle using two sheet metal screws and back-up plate provided. Place back-up plate (4) behind dashboard. Use flat-head screw (2) in top mounting hole and hex-washer screw (3) in bottom mounting hole. Be certain mounting screws fasten into holes in back-up plate.Figure 4.2: Installing the Mounting BracketRelease Button12Warning Label / LED IndicationCharging Contact3Rotating Pocket4LED5Cigarette Light Adapter (CLA)68Product LabelVehicle Dashboard1234
VEHICULAR CHARGER PMLN6716_English24Operating InstructionsVehicular Chargers are intended for use only with the authorized Motorola battery listed in Table 4.1 ; usage with unauthorized products may prevent proper operation and may damage the device.Placing and Removing the Vehicular Charger from Mounting BracketFigure 4.3: Removing Vehicular Charger from Mounting BracketTable 4.2: Mounting Brackets DescriptionItem Motorola Part Number Description1 0180757T98 Hang-up Clip2 0312002C01 Flat-Head Screw3 0312002A01 Hex-Washer Head Screw4 0780257N01 Back-up PlateMounting BracketMetal Stud
VEHICULAR CHARGER PMLN6716_English25Figure 4.4: Placing and Removing the Vehicular Charger from the Mounting BracketMount the Charger1Slide in the stud onto the bracket as per step (1).Remove the Charger1Rotate the cradle horizontally (90 °) as per step (2) & (3).2Slide out the cradle as per step (4).InsertionRemovalSlide outSlideinRotate 90°1234
VEHICULAR CHARGER PMLN6716_English26Placing and Removing the WRSM or Battery to and from the Vehicular ChargerPlacing the WRSM or Battery to the Vehicular ChargerThe Vehicular Charger will accommodate a WRSM with an attached battery or battery alone in pocket. To charge a battery, use the following procedure:1Plug in the CLA adaptor to CLA power supply. The charger LED will flash single green once to indicate a successful power-up.2Insert a WRSM with battery into the charger’s pocket by:aAligning the groove on each side of the battery with the corresponding raised rail on each side of the charger pocket per Figure (R1).bPressing on the front – top surface of the WRSM according to the direction indicated in Figure (R2) to lock the WRSM into Vehicular Charger.3When the WRSM with battery is properly seated in the pocket, the charger LED will light in accordance with Table 4.3 per Figure (R3).4Insert a battery into the charger’s pocket by:aAligning the groove on each side of the battery with the corresponding raised rail on each side of the charger pocket per Figure (B1).bPressing on the front – top surface of the battery according to the direction indicated in Figure (B2) to lock the battery into Vehicular Charger.3When the battery is properly seated in the pocket, the charger’s LED will light in accordance with Table 4.3 per Figure (B3).Removing the WRSM or Battery from the Vehicular ChargerThe Vehicular Charger will accommodate a WRSM with an attached battery or battery alone in pocket. To stop charging a battery, use the following procedure:1Unplug the CLA from the vehicle’s cigar lighter socket.2Remove a WRSM with battery from the charger’s pocket by:aPressing on the Vehicular Charge’s release button to unlatch the battery per Figure (R3).bRemove the WRSM from the pocket by sliding the WRSM upward per Figure (R2).3Remove a battery from the charger’s pocket by:aPressing on the Vehicular Charge’s release button to unlatch the battery per Figure (B3).bRemove the battery from the pocket by sliding the battery upward per Figure (B2).
VEHICULAR CHARGER PMLN6716_English27Attach and Remove WRSMFigure 4.5: Attaching and Removing the WRSM from the Vehicular ChargerInsertionRemovalSlideinPressPressFigure (R1) Figure (R2) Figure (R3)Slideout LED ON123
VEHICULAR CHARGER PMLN6716_English28Attach and Remove BatteryFigure 4.6: Attaching and Removing the Battery from the Vehicular ChargerInsertionRemovalFigure (B1) Figure (B2) Figure (B3)SlideinPressPressSlideoutLED ON123
VEHICULAR CHARGER PMLN6716_English29Swivel Clip Position When Placing Onto Vehicular ChargerThe Vehicular Charger will accommodate for both swivel clips:•Standard swivel clip (PMLN6743_) – Any rotational position•D-ring swivel clip (42009312001) – Horizontal positionRotate D-ring swivel clip to horizontal position before inserting the WRSM or battery into the Vehicular Charger.Figure 4.7: Swivel Clip PositionLED Light IndicationWhen troubleshooting, always observe the color of the LED.HorizontalTable 4.3: Charging StatusLED Indication Charger StateSteady GreenCharged at least 95%Steady RedRapid chargeSingle Flash GreenCharged successfully powered up and is ready for useSlow Flash GreenNearly charged at least 90%Slow Flash AmberBattery under voltage recoveryORBattery temperature is either too hot or too cold – Wait to chargeIf battery temperature is within operating temperature, there may be a fault connection – DO NOT charge battery
VEHICULAR CHARGER PMLN6716_English30TroubleshootingIf There is Fast Flash Red Indication:1Confirm the battery being used with the WRSM is listed in Table 4.1 and is good in condition.2Remove the battery and restart the Vehicular Charger.3If the symptom persist, please send the Vehicular Charger to the nearest Service Center for further verification. If There is No LED Indication:1Check that the WRSM with battery or the battery is inserted correctly in the pocket.2Make sure that the CLA adapter is plugged into a CLA power source and the LED on the CLA adapter is on.3Confirm that the battery being used with the WRSM is listed in Table 4.1 .Fast Flash RedBattery under voltage recovery time outORLoss of charge current controlORExcessive power supply voltageORFault connection happened – DO NOT charge batteryOffIf battery is inserted into a successfully powered up charger, battery may have bad contact with chargerTable 4.3: Charging Status (Continued)
REPLACEABLE PARTSEnglish31CHAPTER 5: REPLACEABLE PARTSOther than the replaceable parts listed below, the PMMN4096_, PMLN6714_ and PMLN6716_ are not repairable.The following parts are available:* Charger only UL approved when shipped with this power supply. (Applicable for North America region only)Table 5.1: Replaceable PartsPart Number DescriptionPMLN6743_ Swivel Clip42009312001 D-Ring Swivel ClipPMNN4461_ Battery Standard Li-Ion 1750M1800T25012022001* Power Supply, Charger Switch Mode, 110 – 240 V US/NA/JPN/TAIWAN25012022002 Power Supply, Charger Switch Mode, 110 – 240 V EURO25012022003 Power Supply, Charger Switch Mode, 110 – 240 V UK25012022004 Power Supply, Charger Switch Mode, 110 – 240 V CHINA25012022006 Power Supply, Charger Switch Mode, 110 – 240 V AUS/NZ25012022007 Power Supply, Charger Switch Mode, 110 – 240 V BRZ25012022008 Power Supply, Charger Switch Mode, 110 – 240 V ARG25012022009 Power Supply, Charger Switch Mode, 110 – 240 V KORHLN9073_ Microphone Hang-up ClipKT-SB1X-LANYD3 Standard Lanyard with VelcroTable 5.1: Replaceable Parts (Continued)Part Number Description
REPLACEABLE PARTSEnglish32NOTES
OPEN SOURCE SOFTWARE LEGAL NOTICEEnglish33CHAPTER 6: OPEN SOURCE SOFTWARE LEGAL NOTICEThis Motorola Solutions Product contains Open Source Software. For information regarding licenses, acknowledgments, required copyright notices and other usage terms, refer to the documentation for this Motorola Solutions Product at: https://businessonline.motorolasolutions.comGo to: Resource Center > Product Information > Manual > Accessories > Remote Speaker Microphone
OPEN SOURCE SOFTWARE LEGAL NOTICEEnglish34NOTES
SERVICE AND SUPPORTEnglish35CHAPTER 7: SERVICE AND SUPPORTDO NOT disassemble the PMMN4096_, PMLN6714_ and PMLN6716_; they are not repairable. Order replacement parts listed in “REPLACEABLE PARTS" on page 41.Please contact Motorola Solutions Customer Care as shown in Table 7.1 below for ordering or any technical troubleshooting assistance.Table 7.1: Motorola Solutions Customer Care Phone NumbersRegions Phone NumberUS and Canada 1-800-927-2744Latin America (5) 257-6700 or (571) 602-1111 European (Repair and Service Centre) +49-30-6686-1555Asia1-800-88-0089 (Contact your Motorola Dealer for Support)
SERVICE AND SUPPORTEnglish36NOTES
WARRANTYEnglish37CHAPTER 9: WARRANTYContact your Motorola Solutions dealer for detailed information on the standard warranty. The workmanship warranty guarantees against defects in workmanship under normal use and service.NOTE: Warranty is void after customer replacement of any parts other than replacement parts listed.Limited WarrantyMOTOROLA COMMUNICATION PRODUCTSI. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:MOTOROLA SOLUTIONS, INC. (“MOTOROLA”) at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA.Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.Table 9.1: Warranty PeriodName YearWireless Remote Speaker Microphone PMMN4096_ One (1) YearDual Unit Charger PMLN6714_ One (1) YearVehicular Charger PMLN6716_ One (1) YearWireless Remote Speaker Microphone Battery PMNN4461_ One (1) Year
WARRANTYEnglish38II. GENERAL PROVISIONS:This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLA’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USER OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. STATE LAW RIGHTS:SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AND IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY.This warranty gives specific legal rights, and there may be other rights which may vary from state to state.IV. HOW TO GET WARRANTY SERVICE:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA at 1-800-927-2744 US/Canada.V. WHAT THIS WARRANTY DOES NOT COVERA Defects or damage resulting from use of the Product in other that its normal and customary manner.B Defects or damage from misuse, accident, water, or neglect.C Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.D A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLA’s normal warranty inspection and testing of the Product to verify any warranty claim.E Product which has had the serial number removed or made illegible.F Freight costs to the repair depot.G A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’s published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.H Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product.I Normal and customary wear and teat.
WARRANTYEnglish39VI. PATENT AND SOFTWARE PROVISIONS:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end use purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:A That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;B That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; andC Should the Product or parts become, or in MOTOROLA’s opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to produce for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software for furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.VII. GOVERNING LAW:This Warranty is governed by the laws of the State of Illinois, U.S.A.MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.© 2016 Motorola Solutions, Inc. All rights reserved.
WARRANTYEnglish40NOTES

Navigation menu