Motorola Solutions 89FT6018 Stun Gun Sensor User Manual Ferrite Strips Installation Leaflet

Motorola Solutions, Inc. Stun Gun Sensor Ferrite Strips Installation Leaflet

Manual

Ferrite Strips Installation LeafletMN004580A01-AA*MN004580A01*mMOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.© 2018 Motorola Solutions, Inc. All rights reserved.Printed in
X26PX2 X2X26PX26P Taser Ferrite Strip (Small)X2 Taser Ferrite Strip (Large)Transparent filmLiner1. Clean the surface of the taser with alcohol swab and leave to dry thoroughly.2. Select the corresponding ferrite strips. Note: Keep the extra ferrite strips for future use.3. Gently peel off the liner. Avoid touching the adhesive.6. Peel off the transparent filmbefore use. 4. Hold the film tab and align it within the finger rest recess area.5. Press firmly for 60 seconds. Let it bond for one hour to secure the strip. Repeat step 1-5 on the other side of the taser.

Navigation menu