Motorola Solutions 89FT6018 Stun Gun Sensor User Manual Ferrite Strips Installation Leaflet
Motorola Solutions, Inc. Stun Gun Sensor Ferrite Strips Installation Leaflet
Manual
Ferrite Strips Installation Leaflet
MN004580A01-AA
*MN004580A01*
m
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo
are trademarks or registered trademarks of Motorola Trademark Holdings,
LLC and are used under license.
All other trademarks are the property of their respective owners.
© 2018 Motorola Solutions, Inc. All rights reserved.
Printed in
X26P
X2 X2
X26P
X26P Taser Ferrite Strip (Small)
X2 Taser Ferrite Strip (Large)
Transparent film
Liner
1. Clean the surface of the taser
with alcohol swab and leave to dry
thoroughly.
2. Select the corresponding ferrite
strips. Note: Keep the extra ferrite
strips for future use.
3. Gently peel off the liner. Avoid
touching the adhesive.
6. Peel off the transparent film
before use.
4. Hold the film tab and align it
within the finger rest recess area.
5. Press firmly for 60 seconds. Let
it bond for one hour to secure the
strip. Repeat step 1-5 on the
other side of the taser.