Motorola Solutions 89FT7004 Handheld Data Terminal with Bluetooth Modem User Manual Latest Users Manual
Motorola Solutions, Inc. Handheld Data Terminal with Bluetooth Modem Latest Users Manual
Contents
- 1. Exhibit 8 EME User Card and User Manual
- 2. Latest Users Manual
- 3. Latest Safety Booklet
- 4. Latest User Manual
Latest Users Manual
Inca very small format.book Page 1 Thursday, May 22, 2003 7:57 PM Owner’s Manual HDT 600 Handheld Data Terminal 68P02966C70-A 68P02966C70-A @6802966C70@ Inca very small format.book Page i Thursday, May 22, 2003 7:57 PM Contents COMPUTER SOFTWARE COPYRIGHTS...................... iii FCC INTERFERENCE WARNING................................. vi What is the HDT 600 Terminal ........................................ 1 HDT 600 Parts ................................................................ 3 Unpacking ....................................................................... 4 HDT 600 Cradle Connections ......................................... 5 Installing the Battery........................................................ 6 Removing the Battery...................................................... 6 First Time Battery Charge ............................................... 7 Charging the Battery ....................................................... 8 Battery Maintenance ...................................................... 9 Turning on the HDT 600 ................................................ 10 Suspend Mode .............................................................. 10 Turning off the HDT 600 ................................................ 10 Using the HDT 600........................................................ 11 Using the Stylus Pen ..................................................... 11 Scanning With the HDT 600 (Optional) ......................... 12 Resetting the HDT 600.................................................. 13 Cradle Installation ......................................................... 14 Maintaining the HDT 600 .............................................. 16 Accessories................................................................... 17 What to Do If ................................................................. 18 Battery Warnings and Disposal ..................................... 20 © Motorola Inc., 2003 Commercial, Government and Industrial Solutions Sector 1301 E. Algonquin Road, Schaumburg, IL 60196 68P02966C70-A June, 2003 Inca very small format.book Page ii Thursday, May 22, 2003 7:57 PM This page intentionally left blank ii Inca very small format.book Page iii Thursday, May 22, 2003 7:57 PM COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this instruction manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained In the Motorola products described in this instruction manual may not be copied or reproduced in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel. or otherwise. any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product. EPS – 34440- B This warranty applies within the fifty (50) United States, the District of Columbia and Canada. LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTS If the affected product is being purchased pursuant to a written Communications System Agreement signed by Motorola, the warranty contained in that written agreement will apply. Otherwise, the following warranty applies. I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: Motorola Inc. or, if applicable, Motorola Canada Limited ("Motorola") warrants the Motorola manufactured radio communications product, including original equipment crystal devices and channel elements ("Product"), against material defects in material and workmanship under normal use and service for a period of One (1) Year from the date of shipment. Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it with the same or equivalent Product (using new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided purchaser notifies Motorola according to the terms of this warranty. Repaired or replaced Product is warranted for the balance of the original applicable warranty period. All replaced parts of the Product shall become the property of Motorola. This express limited warranty is extended by Motorola to the original end user purchaser purchasing the Product for purposes of leasing or for commercial, industrial, or governmental use only, and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by Motorola. Motorola assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of Motorola. Unless made in a separate written agreement between Motorola and the original end user purchaser, Motorola does not warrant the installation, maintenance or service of the Product. Motorola cannot be responsible in any way for any ancillary equipment not furnished by Motorola which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, Motorola disclaims liability for range, coverage, or operation of the system as a whole under this warranty. iii Inca very small format.book Page iv Thursday, May 22, 2003 7:57 PM II. GENERAL PROVISIONS: This warranty sets forth the full extent of Motorola’s responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at Motorola’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. MOTOROLA DISCLAIMS ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III.HOW TO GET WARRANTY SERVICE: Purchaser must notify Motorola’s representative or call Motorola’s Customer Response Center at 1800-247-2346 within the applicable warranty period for information regarding warranty service. IV. WHAT THIS WARRANTY DOES NOT COVER: A) Defects or damage resulting from use of the Product in other than its normal and customary manner. B) Defects or damage from misuse, accident, water, or neglect. C) Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. D) A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorola’s normal warranty inspection and testing of the Product to verify any warranty claim. E) Product which has had the serial number removed or made illegible. F) Batteries (they carry their own separate limited warranty). G) Freight costs to the repair depot. H) A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with Motorola’s published specifications or with the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from Motorola. I) Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. J) That the software in the Product will meet the purchaser’s requirements or that the operation of the software will be uninterrupted or error-free. K) Normal and customary wear and tear. L) Non-Motorola manufactured equipment unless bearing a Motorola Part Number in the form of an alpha numeric number (i.e., TDE6030B). iv Inca very small format.book Page v Thursday, May 22, 2003 7:57 PM V. GOVERNING LAW In the case of a Product sold in the United States and Canada, this Warranty is governed by the laws of the State of Illinois and the Province of Ontario, respectively. VI.PATENT AND SOFTWARE PROVISIONS: Motorola will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or its parts infringe a United States patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following: A) that Motorola will be notified promptly in writing by such purchaser of any notice of such claim; B) that Motorola will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and C) should the Product or its parts become, or in Motorola's opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit Motorola, at its option and expense, either to procure for such purchaser the right to continue using the Product or its parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or its parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or its parts as established by Motorola. Motorola will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or its parts furnished hereunder with software, apparatus or devices not furnished by Motorola, nor will Motorola have any liability for the use of ancillary equipment or software not furnished by Motorola which is attached to or used in connection with the Product. The foregoing states the entire liability of Motorola with respect to infringement of patents by the Product or any its parts thereof. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. Motorola software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such Motorola software or exercise of rights in such Motorola software is permitted. No license is granted by implication, estoppel or otherwise under Motorola patent rights or copyrights. EPS – 48759 – O Inca very small format.book Page vi Tuesday, June 10, 2003 7:10 PM FCC INTERFERENCE WARNING The FCC requires that manuals pertaining to Class A and Class B computing devices must contain warnings about possible interference with local residential radio and TV reception. This warning reads as follows: NOTE: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 90 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial or residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. This device complies with Part 90 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications made in the radio terminal, not expressly approved by Motorola, will void the user's authority to operate the equipment. For detailed product safety and RF exposure for portable terminals with two-way radios, refer to Electromagnetic Emission (EME) safety leaflet, Motorola publication number 68P02965C93. Table 1 FCC Grant Of Equipment Authorization Nomenclature Wireless System Frequency Band Power Antenna FCC ID F4415 Bluetooth 2.4 GHz 1 mW Internal AZ489FT7003 VA00024 Wireless LAN (USA) 2.4 GHz 100 mW Internal AZ489FT7003 VA00016 GPRS on GSM/DCS 900/1800 MHz 2W/1W Internal AZ489FT7003 VA00052 Private DataTAC 806-825 MHz 1.8 W Internal AZ489FT7004 VA00010 iDEN 806-821 MHz 600 mW Internal AZ489FT7007 Trademarks Motorola and the Motorola logo are registered trademarks of Motorola, Inc. iDEN is a registered trademark of Motorola, Inc. FlashFile is a trademark of Intel Corporation. Microsoft, Windows, and Windows CE are registered trademarks of Microsoft Corporation. vi Inca very small format.book Page 1 Thursday, May 22, 2003 7:57 PM What is the HDT 600 Terminal The HDT 600 is a handheld terminal designed for field applications where fast data acquisition is required. Its ergonomic design is easy to hold and carry. Its unique shape fits the hand, and the back strap provides extra grip. The Windows® CE 3.0 operating system with touch screen and soft-keys provides easy access to various applications. The HDT 600 is equipped with a 3.6 inch color LCD screen with LED front-light, viewable in all light conditions, including direct sunlight. The touch sensitive screen enables signature capture as well as easy selection from an on-screen menu. A LASER beam barcode reader (optional) enables one-hand barcode reading on both vertical and horizontal labels. The barcode is activated by one of four dedicated trigger keys, made for right or left handed users. The unit operates in all weather conditions and is protected against hostile environment factors, such as impact, rain, vibrations and electrostatic discharge. An RS232 port serves for uploading and downloading data between the HDT 600 and a PC via the HDT 600 Cradle. Connections for external power supply are also provided. The 1400mA Lithium-Ion battery pack provides at least one shift of operation (10-hour duty cycle for typical use) before charging is needed. The HDT 600 uses the following methods of communication: • • Short distance: Each HDT 600 contains a Bluetooth™ radio module for short distance communication with peripheral devices such as printers etc. Wireless Local Area Network (WLAN) communication: An optional Spread Spectrum 2.4GHz radio module provides coverage within a local distribution hub. Inca very small format.book Page 2 Thursday, May 22, 2003 7:57 PM • Wide Area Network (WAN) communication: 1. An optional General Packet Radio Service (GPRS) radio module provides coverage within cellular infrastructure. 2. An optional private DataTAC™ radio module provides coverage within the private DataTAC network infrastructure. 3. An optional iDEN (Harmony) radio module provides coverage within the private iDEN network infrastructure. It is also possible to use GPRS and WLAN communication by installing both radios within the HDT 600. Inca very small format.book Page 3 Thursday, May 22, 2003 7:57 PM HDT 600 Parts Front View Buzzer Back View Barcode Scanner LASER Window LED Indicator Power Button (On/Off/Suspend) Barcode Scanner Triggers Battery Lock Touch Sensitive Screen Function Soft Keys Battery Hand Strap Stylus Pen Stylus Pen Silo Battery Charge & Communication Contacts Terminal Release Button Red LED indicating HDT 600 locked into Cradle Terminal Release Button HDT 600 Cradle Inca very small format.book Page 4 Thursday, May 22, 2003 7:57 PM Unpacking The HDT 600 Data Terminal and HDT 600 Cradle are shipped in separate packages. The HDT 600 Data Terminal package includes the following items: • One HDT 600 Data Terminal unit • One 7.2V 1400mAH Li-ion battery pack • One Stylus pen • This Owner’s Manual The HDT 600 Cradle package includes the following items: • • HDT 600 Cradle 12/24 VDC vehicle power cable with 3 Amps fuse or Cigarette lighter adapter • This Owner’s Manual If ordered, you may also receive optional accessories such as: • Cigarette Lighter Cable for vehicle Cradle • Desktop Adaptor for vehicle Cradle • Wall Mount Bracket Carefully unpack each item from the shipping carton. Retain the shipping carton until you have checked all items for shipping damage, and checked that you have received all items ordered. If there is damage or missing items, return in the shipping carton. The battery is shipped from factory uncharged and not installed. Charge the battery before using the HDT 600 for the first time. See “First Time Battery Charge” on page 7. The HDT 600 is shipped with a plastic film protecting the screen. Before using, remove the film and use a soft cloth to buff the display. This ensures smooth gliding of the Stylus pen over the surface. Inca very small format.book Page 5 Thursday, May 22, 2003 7:57 PM HDT 600 Cradle Connections Important Note: This product should be installed according to local applicable laws and directives. The HDT 600 terminal can communicate with a host PC directly through its communication port HDT 600 Cradle RS232 Cable to PC COM Port Desktop Adapter 3 Amps fuse Cigarette Lighter Cable for Vehicle Cradle Power Cable for vehicle (To 12/24VDC power system) 3 Amps Fuse inside Inca very small format.book Page 6 Thursday, May 22, 2003 7:57 PM Installing the Battery The battery is shipped from the factory uncharged and not installed. Charge the battery before using the HDT 600 for the first time. 1. Before installing the battery, release the terminal hand strap, as shown below. 2. Verify that the battery lock is in Unlock position. 3. To install the battery, position the battery in the right-hand side of the battery compartment and lower it downward to its place. 4. Use a coin to lock the battery by turning the battery lock clockwise to the Lock position. Note that the battery is locked only when the two dots align (See figure below). Hand Strap Power Button Battery Lock Unlock Lock Removing the Battery Important Note: The HDT 600 enables you to replace batteries without losing information stored in its memory. To avoid losing information stored in the memory, charged battery must be installed within 2 minutes after removing empty battery. Inca very small format.book Page 7 Thursday, May 22, 2003 7:57 PM 1. Turn the HDT 600 off by holding the Power button pressed for at least two seconds. 2. Release the terminal hand strap as shown in the figure above. 3. Use a coin to unlock the battery by turning the battery lock counter-clockwise. 4. To remove the battery, lift the left-hand side of the battery and pull it out. First Time Battery Charge The battery charges when installed in the HDT 600. Charge your new battery for at least six continuous hours before using it or until the LED indicator of the HDT 600 changes from red to green. The first time charge is referred to as initializing and will ensure maximum battery start capacity. The HDT 600 Cradle charges your battery effectively when it is at room temperature [approx. 68°F (20° C)]. The battery will charge in a temperature range of 32°F to 113°F (0°C to 45°C). Inca very small format.book Page 8 Thursday, May 22, 2003 7:57 PM Charging the Battery The LED indicator displays your charge status (See figure below). Please note that the HDT 600 can be On, Off or in Suspend mode while charging. LED indicator Red: charging Green: battery full Red blinks: charging problem Push back to lock HDT 600 into Cradle Press to unlock HDT 600 Press to unlock HDT 600 Red LED indicating HDT 600 locked into Cradle Caution To avoid damage and provide optimal performance of the HDT 600 and Cradle, use only a Motorola approved power supply. To charge the battery, perform the following steps: 1. Connect the power cable to the socket at the base of the Cradle. 2. Slide the HDT 600 into the Cradle and lock the HDT 600 inside by pushing it towards the back of the Cradle. Inca very small format.book Page 9 Thursday, May 22, 2003 7:57 PM Warning When installed in a vehicle, the HDT 600 must be locked into the Cradle. If not locked, the HDT 600 may be propelled with great force and may cause serious injury to occupants of the vehicle. Important Note: The HDT 600 will not charge if not locked into the Cradle. Once the HDT 600 is locked, the Cradle red LED will turn on, indicating lock status. 3. To remove the HDT 600 from the Cradle, press the unlock button(s) until the HDT 600 unlocks, and remove the HDT 600 from the Cradle. Battery Maintenance The performance of the rechargeable battery delivered with your HDT 600 depends on the way the battery is treated. Therefore, to comply with the Motorola warranty for batteries and to assure high performance and a long life for your Motorola rechargeable battery, please read and follow the maintenance rules stated below. Battery Storage Do not store your battery where the temperatures will exceed 65°C or fall below -20°C. New Lithium-Ion batteries (i.e. batteries that have never been charged before) may be stored for up to 3 months in well-ventilated, cool and dry areas without significant loss in lifespan. Batteries which have already been charged and then stored for more than 2 months should be recharged before use. Extending Battery Life A battery is an expendable part and may need replacing during the life of the HDT 600. To ensure maximum service life of your HDT Inca very small format.book Page 10 Thursday, May 22, 2003 7:57 PM 600, always replace the battery with a genuine Motorola replacement. Your Cradle will charge your battery effectively when it is at room temperature (approx. 20° C). Battery charging temperature range is 0°C to 45°C. Turning on the HDT 600 Press the Power button to start the HDT 600. The HDT 600 also powers on immediately when the battery is inserted. As the HDT 600 initializes its unique flash file system, the Motorola logo displays for about one minute. Note that this screen also appears every time you perform a restart. Suspend Mode The Suspend mode is used for saving the HDT 600 battery power by turning off the display and computer sections of the HDT 600, while keeping the radio(s) powered on. When the HDT 600 is on, press the Power button to toggle between Suspend and Resume modes. During the Suspend mode, the display turns off and the LED indicator blinks green. When the HDT 600 resumes, it returns to the screen displayed prior to the Suspend mode. Use the Suspend mode as often as possible to save battery power. Turning off the HDT 600 When the HDT 600 is on or in Suspend mode, hold the Power button pressed for at least two seconds, to turn off the HDT 600. 10 Inca very small format.book Page 11 Thursday, May 22, 2003 7:57 PM Using the HDT 600 When using the HDT 600, the hand strap on the back of the unit provides stability. Insert your left or right hand under the strap while holding the stylus pen in the other hand. Using the Stylus Pen The Stylus pen selects items and enters information. Use the pen as you use your PC mouse. • • • To open and select screen items, tap on the item twice with the pen. To drag text or image items, hold the pen on the item and drag across the screen. To see a list of actions available for specific item, tap-and-hold the pen on an item. When the pop-up menu appears, tap the action you want to perform. 11 Inca very small format.book Page 12 Thursday, May 22, 2003 7:57 PM Scanning With the HDT 600 (Optional) The HDT 600 is equipped with four scan trigger buttons, designed for left-handed and right-handed users. The buttons are located on the left-hand and right-hand sides of the terminal and on the lefthand and right-hand sides of the upper front panel. The HDT 600 has an integrated scanner which gathers data by scanning barcodes. To scan barcodes with the HDT 600, aim the scanner at the barcode. Press one of the four scan trigger buttons. Ensure the red scan beam covers the entire barcode. The green scan LED lights and a beep sounds to indicate a successful decode. LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT LUMIERE LASER NE PAS REGARDER LE RAYON FIXEMENT PRODUIT LASER DE CLASSE 2 45° Scan Angle Scan Trigger Buttons Scan Trigger Buttons 12 Inca very small format.book Page 13 Thursday, May 22, 2003 7:57 PM Resetting the HDT 600 Power Button At times, you may need to reset your HDT 600. If your HDT 600 stops responding, perform the following actions: Warm Boot Important Note: When HDT 600 is warm booted, all information remains stored in memory. 1. Simultaneously, press soft keys 1, 2 and the Power button for at least 5 seconds; the HDT 600 will function again. If your HDT 600 still does not respond perform: Cold Reset Important Note: When HDT 600 is cold reset, all information stored in its memory will be lost. 2. Simultaneously, press soft keys 2, 3 and 4 for at least five seconds to restart your HDT 600. The operation system will reboot in approximately one minute. 13 Inca very small format.book Page 14 Thursday, May 22, 2003 7:57 PM Cradle Installation The Cradle can be installed by using the four threaded holes on its back side (See figure in page 15). Use the holes to attach the Cradle to any surface, such as: vehicle dashboard. Planning is the key to fast, easy HDT 600 Cradle installation. Before a hole is drilled or a wire is run, inspect the vehicle and determine how and where you intend to mount the Cradle and accessories. Plan wire and cable runs to provide maximum protection from pinching, crushing and overheating. Overheating my occur when running wires too close to a heat generating substance. The installation planning should only be undertaken by persons who are competent and able to ensure that the complete installation fulfills its regulatory requirements, such as EMC (ElectroMagnetic Compatibility). Please note that it is the responsibility of the installing party to ensure that the inclusion of mount accessories and connections to the battery system is according to local standards and is not in violation of applicable safety specifications. When routing the power cable to the Cradle, it is important to use as much cable as needed and cut off the remainder. Using the exact cable length ensures proper power supply to the Cradle. Make sure that the power cable has a 3 Amps fuse (See “HDT 600 Cradle Connections” on page 5). The power cable must be connected to the vehicle current protection system. In order to prevent continuous consumption from the vehicle's battery, route the power cable after the ignition switch. Note that the input voltage to the Cradle may range from 10.6 to 32 VDC (Max peak current: 2 Amps). The Cradle output voltage is 12 VDC (Max continuous current: 1 Amp at -22°F to 122°F (-30°C to +50°C), 0.5 Amp at 122°F to 140°F (50°C to 60°C). 14 Inca very small format.book Page 15 Thursday, May 22, 2003 7:57 PM For continued protection against risk of fire, replace only with same type and rating of fuse. Back side of HDT 600 Cradle Threaded holes for installation 4.92” (125 mm) Threaded holes M4X10 1.96 “ (50 mm) Wall Mount Bracket (Pedestal) Dashboard Mounting M4X10 Office Adapter 15 Inca very small format.book Page 16 Thursday, May 22, 2003 7:57 PM Maintaining the HDT 600 The HDT 600 is built for rugged environment. However, please use the following guidelines to keep the HDT 600 in good condition: • • • • • • • 16 Do not scratch the screen. Use only Motorola supplied stylus pen with the touch-sensitive screen. Never use a pen or pencil or any sharp object on the screen. Your HDT 600 is water and dust resistant, still, do not expose it to rain or moisture for long periods of time. Protect your HDT 600 from temperature extremes. Do not leave the HDT 600 on the dashboard of a car on a hot day, and keep the HDT 600 away from hot places. Although the HDT 600 is ruggedized, try not to subject your HDT 600 to extreme impact. Do not store or use your HDT 600 in any location that is extremely dusty, damp or wet. If the battery contacts, screen or surface of the HDT 600 becomes dirty, use a soft lint free cloth, moistened with diluted Isopropyl Alcohol (IPA) solution, for removing dirt. The IPA can be diluted with water up to 20%. Inca very small format.book Page 17 Thursday, May 22, 2003 7:57 PM Accessories Motorola is not responsible for the use of accessories not approved for the HDT 600 (part number F4415). The following Motorola approved accessories are for use with your terminal. Table 1: HDT 600 model F4415 - Motorola Approved Accessories Motorola Approved Accessory Part Number Spare Battery Spare Stylus Cigarette Lighter Cable for Vehicle Cradle Power Cable for Vehicle Wall Mounting Kit HDT 600 Cradle RS232 Cable DB9 Female Desktop Adapter Belt Holster, Leather, HDT 600 Carrying Case, Leather, HDT 600 (shoulder strap, D-Ring belt loop) Carrying Case, Leather, HDT 600 (shoulder strap, fixed belt loop) FNN5105 FLN9805 FKN6009 FKN8044 FLN9782 F4416 FKN4736 FLN9783A FHN6394 FHN6395 FHN6396 Table 2: HDT 600 Cradle - Desktop Options Description Part Number Desktop Option (110V) Desktop Option (220V) VA00054AA VA00055AA 17 Inca very small format.book Page 18 Thursday, May 22, 2003 7:57 PM What to Do If Table 3: Troubleshooting Problem Cause Solution HDT 600 does not turn on Battery not charged Ensure proper battery installation in HDT 600. Charge or replace the battery HDT 600 in Suspend mode Press the Power Button HDT 600 is not locked in Cradle Reinstall HDT 600 in Cradle. Lock the HDT 600 properly in Cradle (See that the HDT 600 and Cradle red LEDs are on) and charge for 6 hours Battery temperature is incorrect Ensure that the battery is in a temperature range 32°F to 113°F (0° to 45°C) and will charge properly Bad battery Replace battery LASER beam does not cover the entire barcode symbol Scan again and make sure that the entire barcode symbol is covered Unreadable barcode Be sure the barcode symbol is not covered HDT 600 red LED does not stop blinking or battery refuses to charge HDT 600 does not detect scan input 18 Inca very small format.book Page 19 Thursday, May 22, 2003 7:57 PM Table 3: Troubleshooting Problem Cause Solution HDT 600 stops responding Problem in HDT 600 operating system or communication network Simultaneously press soft keys 1, 2 and the Power button for at least 5 seconds; the HDT 600 should function again If still does not respond, simultaneously press soft keys 2, 3 and 4 to restart your HDT 600. The operation system will reboot for about a minute Incomplete or no data transmission between HDT 600 and PC HDT 600 is not locked in Cradle Lock the HDT 600 properly in Cradle (See that the red LED is on) Cradle contacts are not clean Clean contacts and remove dust and objects from within the Cradle Bad RS232 cable Replace the RS232 cable Communication software was incorrectly installed or configured See your System Administrator 19 Inca very small format.book Page 20 Thursday, May 22, 2003 7:57 PM Battery Warnings and Disposal HDT 600 On Board Aircraft Always remove the battery from the HDT 600 when shipped via air. Any use of the HDT 600 must be in accordance with applicable regulations per airline regulations. Battery Disposal Batteries must be recycled or disposed of properly in accordance with local requirements. Recycling facilities may not exist in all areas. Please contact your local environmental agency for more information regarding proper disposal. To Prevent Injury Or Burns • USE ONLY SPECIFIED BATTERIES AND CHARGERS. • DO NOT DISPOSE OF ANY BATTERIES IN FIRE, AS THEY MAY EXPLODE! • DO NOT PUNCTURE OR ALLOW METAL TO CONTACT THE BATTERY TERMINALS. • DO NOT DISPOSE OF IN WATER. • DO NOT DISASSEMBLE. • DO NOT STORE ABOVE 140°F (60°C) 20 Inca very small format.book Page 21 Thursday, May 22, 2003 7:57 PM HOW TO REACH US: Commercial, Government and Industrial Solutions Sector 1301 E. Algonquin Road, Schaumburg, IL 60196 Tel: 1-888-567-7347 (inside the US) Tel: 1-847-576-5000 (outside the US) Visit our Web site at www.motorola.com MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. Copyright © 2003 Motorola all rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2003:05:22 19:57:49 Producer : Acrobat Distiller 4.05 for Windows Modify Date : 2003:07:13 19:49:58+03:00 Page Count : 28EXIF Metadata provided by EXIF.tools