Motorola Solutions 89FT7010 Handheld Terminal with GPRS, WLAN & Bluetooth User Manual X Pad owners

Motorola Solutions, Inc. Handheld Terminal with GPRS, WLAN & Bluetooth X Pad owners

Contents

Users Manual

Owner’s ManualX-PadHandheldDataTerminal6802974C15-O@6802974C15@a
COMPUTER SOFTWARE COPYRIGHTSThe Motorola products described in this instruction manual may include copyrighted Motor-ola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copy-righted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer pro-grams contained In the Motorola products described in this instruction manual may not be copied or reproduced in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product.EPS – 34440- BThis warranty applies within the fifty (50) United States, the District of Columbia and Can-ada.Document CopyrightsNo duplication or distribution of this document or any portion thereof shall take place with-out the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola.DisclaimerThe information in this document is carefully examined, and is believed to be entirely reli-able. However, no responsibility is assumed for inaccuracies.Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others.
Commercial WarrantyLimited WarrantyMOTOROLA COMMUNICATION PRODUCTSI. What This Warranty Covers And For How LongMOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA manufactured Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equip-ment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.II. General ProvisionsThis warranty sets forth the full extent of MOTOROLA’s responsibilities regarding the Product. Repair, replace-ment or refund of the purchase price, at MOTOROLA’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-POSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOR-OLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABIL-ITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. State Law RightsSOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY.This warranty gives specific legal rights, and there may be other rights which may vary from state to state.IV. How To Get Warranty ServiceYou must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized X-Pad Units One (1) YearProduct Accessories One (1) Year
warranty service locations. If you first contact the company which sold you the Product, it can facilitate your obtaining warranty service. You can also call Motorola at 1-888-567-7347 US/Canada.V. What This Warranty Does Not CoverA. Defects or damage resulting from use of the Product in other than its normal and customary manner.B. Defects or damage from misuse, accident, water, or neglect.C. Defects or damage from improper testing, operation, maintenance, installation, alteration, mod-ification, or adjustment.D. Breakage or damage to antennas unless caused directly by defects in material workmanship.E. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorola's normal warranty inspection and testing of the Product to verify any warranty claim.F. Product which has had the serial number removed or made illegible.G. Rechargeable batteries if:•any of the seals on the battery enclosure of cells are broken or show evidence of tampering.•the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.H. Freight costs to the repair depot.I. A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’s published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.J. Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product.K. Normal and customary wear and tear.VI. Patent And Software ProvisionsMOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:A. that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;B. that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; andC. should the Product or parts become, or in MOTOROLA’s opinion be likely to become, the sub-ject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to con-tinue using the Product or parts or to replace or modify the same so that it becomes nonin-fringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the com-bination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire lia-bility of MOTOROLA with respect to infringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to pro-duce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, dis-
tribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.VII. Governing LawThis Warranty is governed by the laws of the State of Illinois, USA.Grant of Equipment AuthorizationFCC Grant of Equipment AuthorizationFCC ID: AZ489FT7010 Canada Grant of Equipment AuthorizationIC: 109U-89FT7010EPS – 48759 – OFCC INTERFERENCENOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter-ference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-lowing two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.Radio Network Freq Band Rated PowerWi-Fi 802.11b W-LAN  2412 - 2462MHz 16 mWBluetooth W-PAN 2402 - 2480MHz 1 mWGPRS W-WAN 824.2 - 848.8 MHz / 1850.2 - 1909.8 MHZ 0.631 / 0.809 W
 Simultaneous Radio Transmission- The GSM and Bluetooth transmitters may work simultaneously.- The WLAN and Bluetooth transmitters may work simultaneously.- The GSM and WLAN transmitters may NOT work simultaneously.For detailed product safety and RF exposure refer to Safety and General Informa-tion leaflet, Motorola publication Number 6802974C16.Caution: Changes or modifications made in the radio terminal, not expressly approved by Motorola, will void the user's authority to operate the equipment.TrademarksMotorola and the Motorola stylized M logo are registered trademarks of Motorola, Inc. CompactFlash is a registed trademark of SanDisk Corporation.Microsoft and PocketPC 2003 are registered trademarks of Microsoft Corporation.Wi-Fi is a trademark of the Wi-Fi Alliance.The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license in the U.S.and other countries.All other product or service names are the property of their respective owners.
Government & Enterprise Mobility Solutions1301 E. Algonquin Road, Schaumburg, IL 6019668P02974C15-OMay, 2005© Motorola Inc., 2005ContentsCOMPUTER SOFTWARE COPYRIGHTS ........................................  iDocument Copyrights .................................................................. iDisclaimer.................................................................................... iCommercial Warranty................................................................. iiFCC INTERFERENCE ................................................ ivIntroduction.................................................................................  1What is the X-Pad Terminal........................................................  2Unpacking ...................................................................................  3X-Pad Parts..................................................................................  4Charging the Battery...................................................................  6Battery Installation and Removal ............................................... 6The Universal Office Dock (UOD) Unit........................................ 7First Time Battery Charge ........................................................... 8Routine Battery Charge .............................................................. 9Battery Maintenance.................................................................. 9Battery Storage........................................................................... 9Extending Battery Life .............................................................. 10Using the X-Pad ........................................................................  11Turning On the X-Pad................................................................ 11Turning Off the X-Pad ............................................................... 11Suspend Mode.......................................................................... 11LED Indicator Function.............................................................. 11Using the Stylus Pen................................................................. 12Using the Keyboard .................................................................. 13Key Assignment....................................................... 13Action Keys ............................................................. 14
iiScanning with the X-Pad .......................................................... 14Capturing Images ................................................... 15Resetting the X-Pad.................................................................. 16Maintaining the X-Pad ..............................................................  17Accessories ...............................................................................  17Troubleshooting ........................................................................  18Safety Instructions ....................................................................  21X-Pad On-board Aircraft ........................................................... 21Battery Disposal ....................................................................... 21To Prevent Injury Or Burns ........................................................ 21Laser Safety.............................................................................. 21Battery Warnings and Disposal................................................ 21SPECIFICATIONS........................................................................  23
1IntroductionMotorola congratulates you on your purchase of the X-Pad Handheld Data Terminal!  Its unique functionality and features make this state-of-the-art rugged Personal Digital Assistant (PDA) superior for use in a wide range of applications.This manual covers the basic setup operations and use of the X-Pad termi-nal. Since your X-Pad applications are designed by your company or orga-nization, this manual does not cover any of the software applications resident in your X-Pad. For software applications description, refer to the specific application manual or contact your company or organization repre-sentative for instructions.The X-Pad uses a Universal Office Dock (UOD) unit for power charge and wire communication. Note that this manual briefly mentions the UOD. For detailed installation and operation of the UOD, refer to UOD User Manual, Motorola P.N. 98-08901C59.
2What is the X-Pad TerminalThe X-Pad handheld data terminal is a rugged device, designed for field applications where fast data acquisition is required.The X-Pad carries the functionality of a state-of-the-art Personal Digital Assistant (PDA) that enables portable access to mobile applications, such as mobile messaging, queries and Computer Aided Dispatch.It contains a variety of options, including built-in CMOS imager for barcode labels and image capture, Bluetooth®, Wi-Fi®  LAN (Local Area Network) and General Packet Radio Service (GPRS) wireless radios, all with internal antennas for increased ruggedization. The 3.5” color touch screen with illumination enables easy access to vari-ous applications and signature capture in all light conditions. The IrDA port serves for data exchange between the X-Pad and data network using the Universal Office Dock (UOD) unit.The PocketPC 2003®-based operating system supports multimedia and audio applications, using a built-in microphone, speaker and buzzer. A removable CompactFlash (accessed only by service) is used for memory expansion and operating system updates.The X-Pad is powered by a 7.2V 1800 mAh Lithium-Ion battery pack that supports 12 hours of typical operation. The battery is fully recharged within three hours, using the UOD unit.
3UnpackingThe X-Pad package includes the following items:• One X-Pad unit• One 7.2V 1800 mAh Li-ion battery pack• One Stylus pen• This Owner’s Manual• EME Safety and General Information leaflet, Motorola P.N. 6802974C16Carefully unpack each item from the shipping carton. Check all items for shipping damage, and check that you have received all items ordered. If there is damage or missing items, keep the shipping carton packaging for inspection.Note: Retain the original carton packaging in the event that the X-Pad should need to be returned for service.The battery is shipped from factory uncharged and not installed. Charge the battery fully for 24 hours before using the X-Pad for the first time (see “First Time Battery Charge” on page 8).The X-Pad is shipped with a plastic film, protecting the screen. Before usage, remove the film and use a soft cloth to buff the display. This ensures smooth gliding of the Stylus pen over the surface.
4X-Pad Parts LED Indicator (see page 11)Barcode SCAN (ImagerKey (see page 14)Touch Sensitive Screen SpeakerPower Button (On/Off/Suspend)(see page 11)MicrophoneNavigation KeyPanel (see page 13)Keyboard Keys(see page 13)Figure 1. X-Pad - Front ViewNote that the gray and blue colors in picture are for illustration clarity purposes only and do not reflect the actual color of the unit.
5Docking ContactsBattery(see page 6)Battery Release Button(see page 6)BuzzerIrDA Communication WindowBattery Release ButtonFigure 2. X-Pad - Back ViewImager Window (see page 14)
6Charging the BatteryThe battery is shipped from the factory uncharged and not installed. Charge the battery before using the X-Pad for the first time.Battery Installation and Removal Important Note: The X-Pad enables you to replace batteries without losing information stored in its memory. To avoid losing information stored in the memory, a charged battery must be installed within 4 hours after removing the empty battery. Do not remove battery while the LED indicator of the X-Pad   shows red.To install the battery:1. Insert the battery, bottom end first, into the battery compartment (see Figure 3).2. Carefully press the battery top down-ward until it clicks into place. When X-Pad is powered by battery installa-tion for the first time, see note in “Turning On the X-Pad” on page 11. To remove the battery:1. Turn the X-Pad off by holding the Power button pressed (see Figure 1), for at least four seconds.2. Press the Release Buttons on the battery sides (see Figure 3) and pull away the battery from the X-Pad.Figure 3. Battery Installation Release Buttons
7The Universal Office Dock (UOD) UnitThe UOD unit is used for charging the X-Pad battery and communicating with the X-Pad through an IrDA port. Each UOD unit has nine slots. Each slot may accommodate either a X-Pad with a battery attached, or a battery (stand-alone). Each of the nine slots has a status LED with an associated number. The LEDs are laid out in the same order as the slots. When a slot is empty, its corresponding LED is Off. When a battery or a X-Pad with a battery is inserted to a slot, the slot LED turns On, indicating the battery charge (see Table 1). The battery power can also be tested by pressing the battery power TEST button (see Figure 5).Universal Office Dock (UOD) UnitUOD status LEDBattery ChargeX-Pad charged with battery installedSlot LEDsFigure 4. Universal Office Dock (UOD) Unit
8 First Time Battery ChargeThe first time battery charge ensures maximum start capacity for the bat-tery. Charge your new battery for at least 24 continuous hours before using it or until the LED indicator of the UOD shows green. Note: Out of box batteries are in sleep mode. Press the TEST pad, at the back side of the battery (see Figure 5) for at least two seconds before any attempt to charge or use. Pressing the TEST button awakes the battery gas-gauge.The UOD charges your battery effectively when it is at room temperature [approx. 68°F (20° C)]. Battery charging temperature range is 32°F to 95°F (0°C to 35°C).Table 1: Status of a UOD Slot LED During Battery ChargeSlot LED Status  IndicationNo Light No device inserted.Blinking Amber Battery temperature out of tolerance and charging has been temporarily stopped.Solid Amber X-Pad Battery is being charged.Solid Green X-Pad Battery is at least 90% charged after 2.5 hours and fully charged after 3.Solid Red X-Pad Battery is not fully charged after 3 hours of charging, and is considered failed.
9To test the power capacity of the battery; press the TEST pad on back side of the battery and view the power level indicator.Routine Battery ChargeA battery is charged to 90% of its full capacity after approximately two and a half hours, and is fully charged after three hours, excluding out-of-range periods.Note: The power level indicator shows only an approximate level of the remaining battery life.Important: The battery will not charge if the X-Pad or battery is not prop-erly locked inside the UOD slot.Battery MaintenanceThe performance of the rechargeable battery delivered with your X-Pad depends on the way the battery is treated. Therefore, to comply with the Motorola warranty for batteries and to assure high performance and a long life for your Motorola rechargeable battery, please read and follow the maintenance rules stated below.Battery StorageDo not store your battery where the temperatures exceed 140°F (60°C) or fall below -4°F (-20°C).New Lithium-Ion batteries (i.e. batteries that have never been charged before) may be stored for up to 3 months in well-ventilated, cool and dry areas without significant loss in lifespan.Batteries which have already been charged and then stored for more than 2 months should be recharged before use.100Figure 5. Battery Power TestBattery TEST PadPower Level Indicator
10Extending Battery LifeA battery is an expendable part and may need replacing during the life of the X-Pad. To ensure maximum service life of your X-Pad, always replace the battery with a genuine Motorola replacement.Your UOD will charge your battery effectively when it is at room tempera-ture [approx. 68°F (20° C)]. Battery charging temperature range is 32°F to 95°F (0°C to 35°C).
11Using the X-PadTurning On the X-Pad Press the Power button to turn On the X-Pad (see Figure 7) - when turned On, the last displayed screen will be shown again.Note: The X-Pad powers On immediately when the battery is installed for the first time or after Cold Reset (see page 16) - the Motorola logo will show for about 30 seconds and you will be required to follow on-screen alignment (calibration) instructions.Turning Off the X-PadWhen the X-Pad is On, hold the Power button pressed (see Figure 7) for at least four seconds.When the battery is removed (see “Battery Installation and Removal”) from the X-Pad during operation, the X-Pad turns off automatically. To resume operation after re-installing the battery, press the Power button. Suspend ModeWhen the X-Pad is On, press the Power button (see Figure 7) to enter Sus-pend mode. During Suspend mode the display turns off and the LED indica-tor slowly blinks green. To resume operation, press the Power button again.In Suspend mode, battery power is saved by turning off the display and computer sections of the X-Pad. During Suspend mode, the GPRS and Bluetooth radios continue to operate. When the X-Pad resumes operation, it returns to the screen shown prior to Suspend mode. Use Suspend mode as often as possible to save battery power.LED Indicator FunctionLED shows red - do not remove battery. LED slowly blinks green - X-Pad in Suspend mode.LED quickly blinks green - X-Pad is charged in UOD unit.
12Using the Stylus PenThe Stylus pen selects items and enters information. Use the pen as you use your PC mouse.• To open and select screen items, tap on the item with the pen.• To drag text or image items, hold the pen on the item and drag across the screen. • To see a list of actions available for a specific item, tap-and-hold the pen on an item. When the pop-up menu appears, tap the action you want to perform.Figure 6. Using the Stylus Pen
13Using the KeyboardKey AssignmentFigure 7 describes the X-Pad keyboard.Note: Key assignment may vary by application. Therefore, your keyboard may not function as described. Power Button• Hold pressed for 4 sec to turn Off• When On, press to  Sus-pend• When Off or in Suspend mode, press to turn OnBarcode SCAN Key Up KeyHelp Key (active in Numeric mode)Clear Screen Key(alpha mode) or All (numeric mode)Alpha/Numeric KeysUse SHIFT key to toggleDown KeySHIFT Key• Press to toggle between alpha and numeric modes• In Alpha mode, press to produce capital letters• Hold pressed for 2 sec to turn screen illumination On/OffBlank Space Key• Blank Space (alpha mode)• Erase (numeric mode)Figure 7. X-Pad - Key Function
14Action KeysTable 2 describes the action keys combinations.Scanning with the X-PadThe X-Pad hand held terminal enables to decode many barcode symbolo-gies and capture images in dim lighting conditions.The terminal features a high-resolution digital imager for omni-directional and auto-discrimination reading and decoding of linear barcodes, stacked linear (PDF417) and 2D matrix codes. The imager functions like a digital camera for either greyscale or black and white pictures.Table 2: Action Keys CombinationsAction Key CombinationWarm Reset (see also “Reset-ting the X-Pad”) H + CLR + GO Lower Case to Upper Case Let-ters (default is lower case)SHIFT + any alphabet key Audio Recording  SHIFT + SP + R Audio Volume Increase: SHIFT +SP + UPDecrease: SHIFT + SP + DOWNTouch Screen Calibration  SHIFT + SP + CDisplay Illumination Intensity Increase: SHIFT + UPDecrease: SHIFT + DOWNKeyboard Back light Intensity Increase: SHIFT + PAGE UPDecrease: SHIFT + PAGE DOWNVirtual Keyboard Open/Close: SHIFT + SCAN + SP PocketPC 2003 Menu SP + SCAN
15The X-Pad is equipped with a SCAN trigger button, designed for both left-handed and right-handed users (see Figure 8). The button is located at the center of the terminal navigation key panel.Images taken by the X-Pad are stored in the terminal memory. Images can be downloaded via IrDA communication to the cradle or transmitted via one of the wireless radio options.Capturing ImagesTo capture an Image:1. Activate your scanning application.2. Aim and hold the X-Pad at a 45° angle approximately 2 to 9 inches (5 to 22 cm) away from the target.3. Press the SCAN button and use the red rectangle light, emitted towards the target, to adjust your posi-tion - a successful scan will be followed by sound indica-tion.Note: When adjusting your position, you may move back and forth from the target. When scanning, the emitted rectangle light can be posi-tioned at any angele to the  barcode symbol. 45° Capture AngleHold 2 to 9 inches (5 to 22 cm)from targetSCAN Trigger ButtonFigure 8. Capturing with the X-Pad Imager
16Resetting the X-PadIn normal use, you should never need to reset the X-Pad.You may need to reset your X-Pad; for example, you may reset due to communication cut-off, or if the operating system stops responding. If your X-Pad stops responding, do the following actions:Warm ResetImportant Note: When the X-Pad is warm reset, all recorded information remains stored in memory.Simultaneously, press keys H + CLR + GO (see Figure 9); the X-Pad will function again. If your X-Pad still does not respond, perform “Cold Reset”:Cold ResetCold reset restarts the X-Pad by erasing all stored records and entries.Do Not perform Cold reset unless Warm reset  fails to solve your problem. Cold reset is performed by removing the battery and inserting the Stylus tip into the hole located on the back side of the X-Pad (see Figure 10).Figure 9. Warm Reset For Cold Reset: insert the Stylus tip into the hole Figure 10. Cold ResetReset hole
17Maintaining the X-PadIn order to maintain your X-Pad in good working order:• Do not scratch the screen. Use only Motorola supplied stylus pen with the touch screen.• Never use a pen or pencil or any sharp object on the screen.• Although your X-Pad is water and dust resistant, do not expose it to rain or moisture for long periods of time.• Protect your X-Pad from temperature extremes. Do not leave the X-Pad on the dashboard of a car on a hot day, and keep the X-Pad away from hot places.• Do not drop your X-Pad or subject it to strong impact.• Do not store or use your X-Pad in any location that is extremely dusty, damp or wet.• If the battery contacts, screen or surface of the X-Pad become dirty, use a soft lint free cloth moistened with diluted Isopropyl Alcohol (IPA) solution to remove dirt. The Isopropyl Alcohol (IPA) can be diluted with water up to 20%.AccessoriesThe following Motorola approved accessories are for use with your termi-nal. Table 3: AccessoriesMotorola Approved Accessory Part NumberBattery FTN6032Stylus FLN9805
18It is the responsibility of the user to use only the approved accessories supplied for this product, as detailed in Table 3 . Motorola is not responsi-ble for the use of accessories not approved for this product.For more information on the availability of these accessories, please call your company supplier.Troubleshooting Table 4: Troubleshooting the X-PadProblem Cause SolutionX-Pad does not turn OnBattery is not installed properly or  not chargedEnsure proper battery installa-tion in X-Pad.Charge or replace the batteryX-Pad in Suspend modePress the Power Button Battery does not charge in UODX-Pad is not locked in UODReinstall X-Pad in UOD. Lock the X-Pad properly in UOD. (See that the UOD LED is On and charge for three hours)X-Pad or UOD Dock contacts are not cleanClean contacts and remove dust and objects from within the UODBattery temperature is out of rangeEnsure that the battery tempera-ture range is 32°F to 95°F (0°C to 35°C)Bad battery Replace battery
19X-Pad does not decode the SCAN inputThe capture frame does not cover the entire barcode symbolCapture again and make sure that the entire barcode symbol is coveredThe Imager window is blockedClean the window with a lint free, soft dry cloth.If the Imager window is badly scratched, send for serviceMake sure that the correct bar-code symbology is being usedUnreadable barcode Be sure the barcode symbol is not covered or damagedX-Pad does not respondProblem in X-Pad operating system or communication net-workExecute Warm reset by simulta-neously pressing soft keys H+CLR+GO for at least one sec-ond; the X-Pad should function againIf X-Pad still does not respond, perform Cold rest (see “Reset-ting the X-Pad” on page 16). The operation system will reboot after about 30 secondsTable 4: Troubleshooting the X-PadProblem Cause Solution
20Incomplete or no data transmis-sion between X-Pad and UODCommunication soft-ware was incorrectly installed or config-uredRefer to the UOD user manual or see your system administratorIrDA communication window is obscuredMake sure that the IrDA window of the X-Pad is clean and has a clear line of sight with the IrDA window of the UODTable 4: Troubleshooting the X-PadProblem Cause Solution
21Safety InstructionsCaution – Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation expo-sure. X-Pad On-board AircraftAlways remove the battery from the X-Pad when shipped via air. Any use of the X-Pad must be in accordance with applicable regulations per airline crew instructions.Battery DisposalBatteries must be recycled or disposed of properly in accordance with local requirements. Recycling facilities may not exist in all areas. Please contact your local environmental agency for more information regarding proper disposal.To Prevent Injury Or Burns• USE ONLY SPECIFIED BATTERIES AND CHARGERS• DO NOT DISPOSE OF ANY BATTERIES IN FIRE, AS THEY MAY EXPLODE!• DO NOT PUNCTURE OR ALLOW METAL TO CONTACT THE BATTERY TERMINALS• DO NOT DISPOSE OF IN WATER• DO NOT DISASSEMBLE•DO NOT STORE ABOVE 140°F (60°C) OR BELOW - 4°F (-20°C)Laser SafetyBattery Warnings and Disposal
22
23SPECIFICATIONSPHYSICAL SPECIFICATIONSWeight  23.7 ± 0.3oz (672 ±10g)Dimensions Width x Length x Depth: 4.1 x 8 x 1.9“ (104 x 202 x 48 mm) ENVIRONOMENTALOperating Temperature Ambient temperature range of shall be  0°C to +60°CStorage Temperature Terminal: -20°C to +70°CBattery: -20°C to +60°CHumidity 8 hours exposure to 90-95% non condens-ing  relative  humidity at 50°C.ELECTRICAL SPECIFICATIONSProcessor type INTEL PXA270 Xscale running at 416MHz Memory Flash: 64 MB, 32-bit data bus, SDRAM: 64 MB, 32-bit data busNon-Volatile Memory Compact Flash 128 MBDisplay  3.5” color, transflective, native portrait LCD with illumination. Resolution: 240 x 320 pix-els (1/4 VGA) Viewing angle ± 35° in both X and Y axis. Viewing area smaller by about 2 mm all aroundTouch Screen  65,000 signatures (<1% linearity change)65,000 to 85,000 signatures (<4% linearity change) Operating force < 100 grams with stylus
24Keyboard  39 keys: 8 Navigation keys, Scan key, 28 alphanumeric keys and Power On/Off key. Software controlled backlighting (On/Off only)Status Indicator  Tricolor LED, Software controlledAudio Microphone: For Mono sound recordingSpeaker: Mono (Bluetooth audio support as a remote microphone and speaker)Beeper: Piezo buzzer with adjustable tones, maximum sound level is 85 db for audio notification of proper scansImager 2D high-speed LASER (manual scan) sup-port for common barcode symbologies including PDF417Main Battery  Two rechargeable Lithium-Ion cells, Nomi-nal 7.2V, 1800 mAh supporting Gas gauging for power monitoringVisible 3 LED bar-graph, switch activated12 hours typical operation. Fully recharged within 3 hours in UOD.Minimum of 300 full discharge/charge cyclesBuilt-in safety circuitry.
25Backup Battery Rechargeable 90 mAh Lithium coin cell (not user replaceable)4 hour preservation of RTC and memoryMinimum 1000+ 10% discharge/charge cyclesMinimum 40+ 100% discharge/charge cyclesSoftwareOperating System  PocketPC 2003Power Management As supported by PocketPC 2003: Run, Idle, Stand By, Docked.CommunicationPersonal Area Network (PAN): Bluetooth RFcommunication (IEEE 802.15.1), 2.4 GHzISM band, 1mWWireless Local Area Network (WLAN):Wi-Fi (IEEE 802.11b), 2.4 GHz ISM band, 50mWWireless Wide Area Network (WWAN):Data-only GPRS compatible dual-band forUSA, 850/1900 MHz, 0.6W/1WInfra-red (IrDA): supports SIR 9.6K/bits to115.2 Kbps and FIR 4 Mbps data rates. AllPocketPC 2003 IR layersWire Interface An Auxiliary Connector support connection to: USB device, External 12 V DC input, headset and RS232 Serial interface (RxD, TxD, CTS, RTS)
26
 27IndexAAccessories 17Action Keys 14Aircraft 21Alphabet Keys 4Audio Recording 14Audio Volume 14BBack light Intensity 14Barcode Scan Key 13Battery Charge 8Battery charging temperature 8battery contacts 17Battery Maintenance 9Battery Power Test 9Battery Storage 9Battery Warnings 21Blank Space Key 13Blinking Amber 8CCharging 6Clean 17Clear Screen Key 13Cold Rese 16cool and dry areas 9DDisposal 21Down Key 13EExtending Battery Life 10HHelp Key 13IIllumination Intensity 14Injury 21Install Battery 6Isopropyl Alcohol 17KKeys Assignment 13LLaser Warning 15LED Indicator 11LED shows red 11Lithium-Ion 2MMaintaining 17Microphone 4NNavigation Key Panel 4PPocketPC 2003 Menu 14Power Button 13Power Level Indicator 9PowerPad Parts 4RRemove Battery 6Reset hole 16
28Resetting 16resume operation 11room temperature 8SSafety 3Safety Instructions 21Scan Angle 15Scanning 16Screen Calibration 14SHIFT Key 13Slot LEDs 7Solid Amber 8Solid Green 8Solid Red 8Speaker 4storage temperatures 9store 17Suspend Mode 11TTEST pad 9Touch Sensitive Screen 4Troubleshooting 18Turning Off 11Turning On 11UUniversal Office Docking 7Unpacking 3UOD User Manual 1Up Key 13VVirtual Keyboard 14WWarm Reset 16
HOW TO REACH US:Government & Enterprise Mobility Solutions1301 E. Algonquin Road, Schaumburg, IL 60196Tel: 1-888-567-7347 (inside the US)Tel: 1-847-576-5000 (outside the US)Visit our Web site atwww.motorola.comMOTOROLA and the Stylized M Logo are reg-istered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners.© Motorola, Inc. 2005.

Navigation menu