Motorola Solutions 89FT7040 PORTABLE MULTIBAND 2-WAY RADIO User Manual APX 7000 Portable Top Display User Guide
Motorola Solutions, Inc. PORTABLE MULTIBAND 2-WAY RADIO APX 7000 Portable Top Display User Guide
Contents
- 1. Users Manual
- 2. RF Safety Booklet
- 3. Stuffer for User Manual
Users Manual
m ASTRO® APX™ 7000 Series Digital Portable Radios Quick Reference Card Product Safety and RF Exposure Compliance Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits. Radio Controls Top (Orange) Button __________ 16-Position Select Knob __________ Antenna Receiving and Transmitting 1 Select zone/channel. 2 Listen for a transmission. On/Off/Volume Control Knob Top Side (Select) Button __________ Top Display OR Press and hold Volume Set button. OR Press Monitor button and listen for activity. 3 Adjust volume, if necessary. 4 Press the PTT button to transmit; release to receive. PTT Button Main Speaker Sending an Emergency Alarm 1 Press the Emergency button. Side Button 1 __________ 3-Position A/B/C Switch __________________ Battery Side Button 2 __________ 2 The display shows EMERGNCY and the current zone/channel. A short, mediumpitched tone sounds, and the LED rapidly blinks red. 3 When acknowledgment is received, you hear Accessory Connector Radio On/Off 2-Position Concentric Switch ______________ • On – On/Off/Volume knob clockwise. • Off – On/Off/Volume knob counterclockwise. four beeps; alarm ends; and radio exits emergency. To exit emergency at any time, press and hold the Emergency button. Zones and Channels • Zone – Zone switch to desired zone. • Channel – Channel switch to desired channel. © 2009 by Motorola, Inc. All Rights Reserved. 03/09 1301 E. Algonquin Rd., Schaumburg, IL 60196-1078, U.S.A. *68007024033* 68007024033-A English Sending an Emergency Call 1 Press the Emergency button. 2 Press and hold the PTT button. Speak clearly into the microphone. 3 Release the PTT button to end call. 4 Press and hold Emergency button to exit emergency. To exit emergency at any time, press and hold the Emergency button. Sending a Silent Emergency Call 1 Press the Emergency button. 2 The display does not change; the LED does not light up, and there is no tone. 3 Silent emergency continues until you: Press and hold the Emergency button to exit emergency state. OR Press and release the PTT button to exit silent emergency mode and enter regular emergency (alarm, call, or alarm with call) mode. To exit emergency at any time, press and hold the Emergency button. English Display Status Icons Blinks when the battery is low. The more stripes, the stronger the signal strength for the current site (trunking only). Direct radio to radio communication or connected through a repeater. On = Direct Off = Repeater M This channel is being monitored. is set at Low power. H L LH == Radio Radio is set at High power. i Scanning a scan list. OR Blinking dot = Detects activity on the Priority-One Channel during scan. Steady dot = Detects activity on the Priority-Two Channel during scan. The vote scan feature is enabled. On = Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call. On steady = View mode Blinking = Program mode Aor Bor Zone Bank 1 A = Radio is in Zone 1. B = Radio is in Zone 2. C = Radio is in Zone 3. Dor Eor Zone Bank 2 D = Radio is in Zone 4. E = Radio is in Zone 5. F = Radio is in Zone 6. Declaration of Conformity DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 1301 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. Hereby declares that the product: Model Name: APX 7000 conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. English Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. Declaration of Conformity • Increase the separation between the equipment and receiver. ii English • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Contents Declaration of Conformity . . . . . . . . . . . . . . . . . .i Important Safety Information . . . . . . . . . . . . . vii Product Safety and RF Exposure Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Attaching the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 3 Attaching the Antenna . . . . . . . . . . . . . . . . . . . . . . . . 4 Attaching the Accessory Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Contents This User Guide contains all the information you need to use the APX™ 7000 Series Digital Portable Radios. Preparing Your Radio for Use . . . . . . . . . . . . . .2 Attaching the Belt Clip . . . . . . . . . . . . . . . . . . . . . . . . 5 Turning On the Radio . . . . . . . . . . . . . . . . . . . . . . . . 6 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . 7 Software Version . . . . . . . . . . . . . . . . . . . . . . . vii Identifying Radio Controls . . . . . . . . . . . . . . . . .7 Computer Software Copyrights . . . . . . . . . . .viii Documentation Copyrights . . . . . . . . . . . . . . .viii Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii Radio Parts and Controls . . . . . . . . . . . . . . . . . . . . . 8 Programmable Features . . . . . . . . . . . . . . . . . . . . . . 9 Assignable Radio Functions . . . . . . . . . . . . . . . . . . 9 Assignable Settings or Utility Functions . . . . . . . . . 10 Accessing the Preprogrammed Functions . . . . . . . 10 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . 1 How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . 1 Notations Used in This Manual . . . . . . . . . . . . . . . . . 1 What Your Dealer/System Administrator Can Tell You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . 10 Identifying Status Indicators . . . . . . . . . . . . . .11 Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 iii English Intelligent Lighting Indicators . . . . . . . . . . . . . . . . . 13 Advanced Features . . . . . . . . . . . . . . . . . . . . . 23 Alert Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Advanced Call Features . . . . . . . . . . . . . . . . . . . . . 23 Receiving and Responding to a Selective Call (ASTRO Conventional Only) . . . . . . . . . . . . . . . . . .23 Using the Dynamic Regrouping Feature (Trunking Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 General Radio Operation . . . . . . . . . . . . . . . . .17 Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Selecting a Radio Channel . . . . . . . . . . . . . . . . . . . 18 Receiving and Responding to a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Receiving and Responding to a Talkgroup Call . . . 19 Receiving and Responding to a Private Call (Trunking Only) . . . . . . . . . . . . . . . . . . . . . . . . 19 Receiving and Responding to a Telephone Call (Trunking Only) . . . . . . . . . . . . . . . . . . . . . . . . 20 Making a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . 21 Making a Talkgroup Call . . . . . . . . . . . . . . . . . . . . . 21 Contents Repeater or Direct Operation . . . . . . . . . . . . . . . . . 21 Monitoring Features . . . . . . . . . . . . . . . . . . . . . . . . 22 Monitoring a Channel . . . . . . . . . . . . . . . . . . . . . . . 22 Conventional Mode Operation . . . . . . . . . . . . . . . . 22 iv English Requesting a Reprogram (Trunking Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Classifying Regrouped Radios . . . . . . . . . . . . . . . .25 Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Viewing a Scan List . . . . . . . . . . . . . . . . . . . . . . . . .25 Viewing and Changing the Priority Status . . . . . . . .25 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Turning Scan On or Off . . . . . . . . . . . . . . . . . . . . . .26 Making a Dynamic Priority Change (Conventional Scan Only) . . . . . . . . . . . . . . . . . . . .27 Deleting a Nuisance Channel . . . . . . . . . . . . . . . . .27 Restoring a Nuisance Channel . . . . . . . . . . . . . . . .27 Call Alert Paging . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Receiving a Call Alert Page . . . . . . . . . . . . . . . . . .28 Secure Operations . . . . . . . . . . . . . . . . . . . . . . . . . 32 Selecting Secure Transmissions . . . . . . . . . . . . . . .32 Selecting Clear Transmissions . . . . . . . . . . . . . . . .32 Managing Encryption . . . . . . . . . . . . . . . . . . . . . . .33 Loading an Encryption Key . . . . . . . . . . . . . . . . . . 33 Using the Multikey Feature . . . . . . . . . . . . . . . . . . 33 Using the Key Zeroization Feature . . . . . . . . . . . . . 34 Requesting an Over-the-Air Rekey (ASTRO Conventional Only) . . . . . . . . . . . . . . . . . 34 Trunking System Controls . . . . . . . . . . . . . . . . . . . . 35 Using the Failsoft System . . . . . . . . . . . . . . . . . . . .35 Going Out of Range . . . . . . . . . . . . . . . . . . . . . . . .35 Using the Site Trunking Feature . . . . . . . . . . . . . . .36 Locking and Unlocking a Site . . . . . . . . . . . . . . . . 36 Viewing and Changing a Site . . . . . . . . . . . . . . . . . 36 Viewing the Current Site . . . . . . . . . . . . . . . . . . . . 36 Changing the Current Site . . . . . . . . . . . . . . . . . . 36 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Using the Flip Display . . . . . . . . . . . . . . . . . . . . . . 37 Selecting a Zone Bank . . . . . . . . . . . . . . . . . . . . . . 37 Selecting the Power Level . . . . . . . . . . . . . . . . . . . 37 Controlling the Display Backlight . . . . . . . . . . . . . . 38 Turning Voice Mute On or Off . . . . . . . . . . . . . . . . 38 Using the Time-Out Timer . . . . . . . . . . . . . . . . . . . 38 Using the Conventional Squelch Operation Features . . . . . . . . . . . . . . . . . . . . . . . . 39 Contents Emergency Operation . . . . . . . . . . . . . . . . . . . . . . . 28 Sending an Emergency Alarm . . . . . . . . . . . . . . . .29 Sending an Emergency Call (Trunking Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Sending an Emergency Alarm with Emergency Call . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Sending a Silent Emergency Alarm . . . . . . . . . . . .31 Using the Emergency Keep-Alive Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Analog Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Digital Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Using the PL Defeat Feature . . . . . . . . . . . . . . . . . 40 Using the Digital PTT ID Feature . . . . . . . . . . . . . . 41 Using the Smart PTT Feature (Conventional Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Helpful Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Caring for Your Radio . . . . . . . . . . . . . . . . . . . . . . . 42 English Cleaning Your Radio . . . . . . . . . . . . . . . . . . . . . . . 43 Handling Your Radio . . . . . . . . . . . . . . . . . . . . . . . 43 Servicing Your Radio . . . . . . . . . . . . . . . . . . . . . . . 44 Taking Care of the Battery . . . . . . . . . . . . . . . . . . . 44 Checking the Battery Charge Status . . . . . . . . . . . 44 Special Channel Assignments . . . . . . . . . . . . . . . . 49 Emergency Channel . . . . . . . . . . . . . . . . . . . . . . . .49 Non-Commercial Call Channel . . . . . . . . . . . . . . . .49 LED and Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Fuel Gauge Icon . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Operating Frequency Requirements . . . . . . . . . . . 50 Battery Recycling and Disposal . . . . . . . . . . . . . . . 45 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Batteries and Battery Accessories . . . . . . . . . . . . . 46 Carry Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 46 Belt Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Belt Loops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Carry Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Contents Appendix: Maritime Radio Use in the VHF Frequency Range . . . . . . . . . . . . . . . . . . 49 Audio Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 48 vi English Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Commercial Warranty . . . . . . . . . . . . . . . . . . . 56 Software Version Product Safety and RF Exposure Compliance All the features described in the following sections are supported by the radio's software version R01.00.00 or later. Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits. Check with your dealer or system administrator for more details of all the features supported. Important Safety Information Important Safety Information For a list of Motorola-approved antennas, batteries, and other accessories, visit the following website: http://www.motorola.com/governmentandenterprise vii English Computer Software Copyrights Computer Software Copyrights Documentation Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. viii English Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others. Getting Started How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . page 1 Notations Used in This Manual . . . . . . . . . . . . . . . . . . . page 1 What Your Dealer/System Administrator Can Tell You. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2 Throughout the text in this publication, you will notice the use of WARNING, Caution, and Note. These notations are used to emphasize that safety hazards exist, and the care that must be taken or observed. An operational procedure, practice, or condition, etc., which may result in injury or death if not carefully observed. An operational procedure, practice, or condition, etc., which may result in damage to the equipment if not carefully observed. How to Use This Guide Getting Started Take a moment to review the following: Notations Used in This Manual This User Guide covers the basic operation of the APX™ 7000 Portables. However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information. Note: An operational procedure, practice, or condition, etc., which is essential to emphasize. English What Your Dealer/System Administrator Can Tell You Preparing Your Radio for Use Assemble your radio by following these steps: Preparing Your Radio for Use Check with your dealer or system administrator, if the radio is to be operated in extremely cold temperatures (less than -20°C), for the correct radio settings to ensure proper top display operation. You can also consult your dealer or system administrator about the following: • Is your radio preprogrammed with any preset conventional channels? • Which buttons have been preprogrammed to access other features? • What optional accessories may suit your needs? English Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3 Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3 Attaching the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3 Attaching the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . page 4 Attaching the Belt Clip . . . . . . . . . . . . . . . . . . . . . . . . . . page 5 Attaching the Accessory Connector Cover . . . . . . . . . . page 5 Turning On the Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7 Charging the Battery • DO NOT replace the battery in any area labeled “hazardous atmosphere”. • DO NOT discard batteries in a fire. The Motorola-approved battery shipped with your radio is uncharged. Prior to using a new battery, charge it for a minimum of 16 hours to ensure optimum capacity and performance. For a list of Motorola-authorized batteries available for use with your radio, see Batteries and Battery Accessories on page 46. Note: When charging a battery attached to a radio, turn the radio off to ensure a full charge. Battery Charger With the radio turned off, slide the battery into the radio’s frame until side latches click into place. Preparing Your Radio for Use To avoid a possible explosion: Attaching the Battery To charge the battery, place the battery, with or without the radio, in a Motorola-approved charger. The charger’s LED indicates the charging progress; see your charger’s user guide. For a list of chargers, see Chargers on page 47. English Preparing Your Radio for Use To remove the battery, turn the radio off. Squeeze the release latches on the bottom of the battery until the battery releases from the radio. Remove the battery from the radio. Battery Latch English Attaching the Antenna With the radio turned off, set the antenna in its receptacle and turn clockwise to attach it to the radio. Note: If your radio is preprogrammed with volatile-key retention, the encryption keys are retained for approximately 30 seconds after battery removal. Check with your dealer or system administrator for more information. To remove the antenna, turn the antenna counterclockwise. Make sure you turn off the radio first. Attaching the Accessory Connector Cover Note: To prevent damage to the connector, shield it with the connector cover when not in use. Insert the hooked end of the cover into the slot above the connector. Press downward on the cover’s top to seat it in the slot. Once in place, rotate the thumbscrew clockwise by hand until tight. Align the grooves of the belt clip with those of the radio and press upward until you hear a click. Hooked End Hex Socket Head Thumbscrew To remove the accessory connector cover, rotate the thumbscrew counterclockwise until it disengages from the radio. If the thumbscrew is too tight, use an Allen wrench to loosen it first. To remove the clip, use a flat-bladed object to press the belt clip tab away from the radio. Then, slide the clip downward and away from the radio. Preparing Your Radio for Use The accessory connector is located on the antenna side of the radio. It is used to connect accessories to the radio. Attaching the Belt Clip Rotate and lift the connector cover to disengage it from the radio. English Turning On the Radio Preparing Your Radio for Use Rotate the On/Off/Volume Control Knob clockwise until you hear a click. To turn off the radio, rotate the On/Off/Volume Control Knob counterclockwise until you hear a click. If the power-up test is successful, you see SELFTEST on the radio’s display momentarily, followed by the Home screen. Note: English If the power-up test is unsuccessful, you see ERROR XX/YY (XX/YY is an alphanumeric code). Turn off the radio, check the battery, and turn the radio back on. If the radio fails the power-up test again, record the ERROR XX/YY code and contact your dealer. Adjusting the Volume Identifying Radio Controls Take a moment to review the following: Radio Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . page 8 Programmable Features . . . . . . . . . . . . . . . . . . . . . . . . page 9 Assignable Radio Functions . . . . . . . . . . . . . . . . . . . . page 9 Assignable Settings or Utility Functions . . . . . . . . . . page 10 Accessing the Preprogrammed Functions . . . . . . . . . . page 10 Push-To-Talk (PTT) Button. . . . . . . . . . . . . . . . . . . . . . page 10 Main Speaker Identifying Radio Controls To increase the volume, turn the On/Off/Volume Control Knob clockwise. To decrease the volume, turn this knob counterclockwise. Note: Ensure that the main speaker is pointed towards you for increased loudness and intelligibility, especially in areas with loud background noises. English Radio Parts and Controls 16-Position 10 Select Knob* 1 Antenna On/Off/Volume 5 Control Knob 2 LED Identifying Radio Controls Top (Orange) 11 Button* 15 Display Top Side (Select) 3 Button* Accessory Connector Top 3-Position A/B/C Switch* 16 Microphone 2-Position Concentric Switch* Push-to-Talk 12 (PTT) Button Main 17 Speaker 8 Belt Clip 13 Side Button 1* 18 Battery 14 Side Button 2* 9 Battery Latch English * These radio controls/buttons are programmable. Programmable Features Your dealer can program the programmable buttons as shortcuts to radio functions or preset channels/groups depending on the duration of a button press: • Press – Pressing and releasing rapidly. • Long press – Pressing and holding for the preprogrammed duration (between 0.25 seconds and 3.75 seconds). • Hold down – Keeping the button pressed. Nuisance Delete – Temporarily removes an unwanted channel, except for priority channels or the designated transmit channel, from the scan list. The designated transmit channel refers to the user’s selected zone/channel combination from which scan is initiated. PL Defeat – Overrides any coded squelch (DPL or PL) that is preprogrammed to a channel. Rekey Request – Notifies the dispatcher that you want a new encryption keys. Reprogram Request – Notifies the dispatcher that you want a new dynamic regrouping assignment. Scan List Programming – Selects the scan list for editing. Assignable Radio Functions Call Response – Allows you to answer a private call. Channel – Selects a channel. Dynamic Priority – Allows any channel in a scan list (except for the Priority-One channel) to temporarily replace the Priority-Two channel. Emergency – Depending on the programming, initiates or cancels an emergency alarm or call. IP – Displays the IP (Internet Protocol) information of the radio. Scan – Toggles scan on or off. Identifying Radio Controls Any references in this manual to controls that are “preprogrammed” mean that a qualified radio technician must use the radio’s programming software to assign a feature to a control. Monitor – Monitors a selected channel for all radio traffic until function is disabled. Secure/Clear – Toggles secure operation on or off. Site Display – Displays the current site ID and RSSI value. Site Lock/Unlock – Locks onto a specific site. Site Search – Performs site search for AMSS (Automatic Multiple Site Select) or SmartZone operation. Talkaround/Direct – Toggles between using a repeater and communicating directly with another radio. English Zone Select – Allows selection from a list of zones. Push-To-Talk (PTT) Button Zone Bank – Allows selection from a larger list of zones. Assignable Settings or Utility Functions Flip – Flips the content of the top display. Light – Toggles display backlight on or off. Identifying Radio Controls TX Power Level – Toggles transmit power level between high and low. Voice Mute – Toggles voice mute on or off. Volume Set – Sets the volume set tone. Accessing the Preprogrammed Functions You can access various radio functions through a short or long press of the relevant programmable buttons. 10 English The PTT button on the side of the radio serves two basic purposes: • While a call is in progress, the PTT button allows the radio to transmit to other radios in the call. Press and hold down PTT button to talk. Release the PTT button to listen. The microphone is activated when the PTT button is pressed. • While a call is not in progress, the PTT button is used to make a new call. See Making a Radio Call on page 21 for more information. PTT Button Identifying Status Indicators Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11 LED Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12 Intelligent Lighting Indicators . . . . . . . . . . . . . . . . . . . . page 13 Alert Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14 Status Icons The 112 x 32 pixel top monochrome display screen of your radio shows the radio status and operating conditions. Battery The icon shown indicates the charge remaining in the battery. Blinks when the battery is low. Received Signal Strength Indicator (RSSI) The number of bars displayed represents the received signal strength for the current site, for trunking only. The more stripes in the icon, the stronger the signal. • On = Radio is currently configured for direct radio to radio communication (during conventional operation only). • Off = Radio is connected with other radios through a repeater. H L or Monitor (Carrier Squelch) Selected channel is being monitored (during conventional operation only). Power Level • L = Radio is set at Low power. • H = Radio is set at High power. Scan Radio is scanning a scan list. Priority-One Channel Scan Identifying Status Indicators Your radio indicates its operational status through the following: Direct • Blinking dot = Radio detects activity on channel designated as PriorityOne. • Steady dot = Radio detects activity on channel designated as Priority-Two. 11 English I Top Display Vote Scan Enabled The vote scan feature is enabled. View/Program Mode Radio is in the view or program mode. • On steady = View mode Identifying Status Indicators • Blinking = Program mode Zone Bank 1 A B •• C • or or A = Radio is in Zone 1. B = Radio is in Zone 2. C = Radio is in Zone 3. Zone Bank 2 D E• F • or or 12 English • D = Radio is in Zone 4. E = Radio is in Zone 5. F = Radio is in Zone 6. Secure Operation • On = Secure operation. • Off = Clear operation. • Blinking = Receiving an encrypted voice call. LED Indicator The LED indicator shows the operational status of your radio. LED Indicator Solid red – Radio is transmitting. Blinking red – Radio is transmitting at low battery condition. Double blinking red – Radio is in Emergency Mode. Rapidly blinking red – Radio has failed the self test upon powering up or encountered a fatal error. Solid yellow – Channel is busy. Blinking yellow – Radio is receiving a secured transmission. Solid green – Radio is powering up, or is on a non-priority channel while in the Scan List Programming mode. Blinking green – Radio is receiving an individual or telephone call, or is on a Priority-Two channel while in the Scan List Programming mode. Rapidly blinking green – Radio is on a Priority-One channel while in the Scan List Programming mode. Intelligent Lighting Indicators Note: This feature must be preprogrammed by a qualified radio technician. Backlight Notification Orange Emergency Alerts When The radio initiates an emergency alarm or call. The radio receives an emergency alarm or call. The radio battery is low. Red Critical Alerts The radio is out of range. The radio enters failsoft mode. The radio is unable to establish a full connection with the system. The radio receives a private call. Green Call Alerts The radio receives a phone call. Identifying Status Indicators This feature temporary changes the backlight of the top display screen to help signal that a radio event has occurred. The radio receives a call alert. The radio receives a selective call. 13 English Alert Tones An alert tone is a sound or group of sounds. Your radio uses alert tones to inform you of your radio’s conditions. The following table lists these tones and when they occur. Identifying Status Indicators You Hear 14 English Short, Low-Pitched Tone Tone Name Radio Self Test Fail When radio fails its power-up self test. Reject When unauthorized request is made. Time-Out Timer Warning No ACK Received Individual Call Warning Tone Long, Low-Pitched Tone A Group of Low-Pitched Tones Heard Time-Out Timer Timed Out Talk Prohibit/PTT Inhibit Four seconds before time out. When radio fails to receive an acknowledgment. When radio is in an individual call for greater than 6 seconds without any activity. After time out. (When PTT button is pressed) transmissions are not allowed. Out of Range (When PTT button is pressed) the radio is out of range of the system. Invalid Mode When radio is on an unpreprogrammed channel. Busy When the system is busy. You Hear Tone Name Radio Self Test Pass Short, Medium-Pitched Tone Clear Voice Priority Channel Received Emergency Alarm Entry Central Echo Long, Medium-Pitched Tone Volume Set Emergency Exit Failsoft Automatic Call Back Talk Permit A Group of Medium-Pitched Tones Keyfail Console Acknowledge Received Individual Call When correct key is pressed. When radio passes its power-up self test. At beginning of a non-coded communication. When activity on a priority channel is received. When entering the emergency state. When central controller has received a request from a radio. When volume is changed on a quiet channel. When exiting the emergency state. When the trunking system fails. When voice channel is available from previous request. (When PTT button is pressed) verifying system accepting transmissions. When encryption key has been lost. Identifying Status Indicators Valid Key-Press Heard When status, emergency alarm, or reprogram request ACK is received. When Call Alert or Private Call is received. Call Alert Sent When Call Alert is received by the target radio. Site Trunking When a SmartZone trunking system fails. 15 English You Hear Tone Name Short, High-Pitched Tone (Chirp) Low-Battery Chirp Fast Ringing Identifying Status Indicators Ringing Heard When battery is below preset threshold value. When system is searching for target of Private Call. Enhanced Call Sent When waiting for target of Private Call to answer the call. Phone Call Received When a land-to-mobile phone call is received. Gurgle Dynamic Regrouping (When the PTT button is pressed) a dynamic ID has been received. Unique, Low-Pitched Chirp New Message When a new message is received. Unique, High-Pitched Chirp Priority Status When a priority message is received. 16 English General Radio Operation General Radio Operation Once you understand how your APX 7000 Portable is configured, you are ready to use your radio. Selecting a Zone A zone is a group of channels. Use this navigation guide to familiarize yourself with the basic Call features: 3-Position A/B/C Switch Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 17 Selecting a Radio Channel . . . . . . . . . . . . . . . . . . . . . page 18 Receiving and Responding to a Radio Call . . . . . . . . . page 18 Making a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . . . page 21 Repeater or Direct Operation . . . . . . . . . . . . . . . . . . . page 21 Monitoring Features. . . . . . . . . . . . . . . . . . . . . . . . . . . page 22 Use the following procedure to select a zone. Note: Your radio must be preprogrammed to allow you to use this feature. Procedure: 1 Move the preprogrammed Zone (3-Position A/B/C) switch to the position of the required zone. 2 Press the PTT button to transmit on the displayed zone channel. 17 English Selecting a Radio Channel A channel is a group of radio characteristics, such as transmit/ receive frequency pairs. Receiving and Responding to a Radio Call Once you have selected the required channel and/or zone, you can proceed to receive and respond to calls. General Radio Operation LED Indicator Use the following procedure to select a channel. Note: Your radio must be preprogrammed to allow you to use this feature. If you select a channel that is not within the preprogrammed band, the radio indicates that it is on an unsupported frequency with an audio warning. Procedure: 1 Turn the preprogrammed 16-Position Select knob to the desired channel. 2 Press the PTT button to transmit on the displayed zone 18 channel. English The LED lights up solid red while the radio is transmitting, and solid yellow when the radio is receiving a transmission (conventional mode only). There is no LED indication when the radio receives a transmission in trunking mode. If the radio is receiving a secure transmission, the LED blinks yellow. Receiving and Responding to a Talkgroup Call Procedure: When you receive a talkgroup call (while on the Home screen), depending on how your radio is preprogrammed: 1 ASTRO Conventional Only: The LED lights up solid yellow. OR Trunking Only: The display shows the caller alias or ID. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to respond to the call. The LED lights up solid red. 4 Release the PTT button to listen. See Making a Talkgroup Call on page 21 for details on making a Talkgroup Call. (Trunking Only) A Private Call is a call from an individual radio to another individual radio. These one-to-one calls between two radios are not heard by others in the current talkgroup. The calling radio automatically verifies that the receiving radio is active on the system and can display the caller’s ID. Note: The radio automatically exits the feature, if the time-out timer is enabled, when the radio is left idle and the timer expires. You will hear the Inactive Exit Tone upon feature exit. Procedure: When you receive a Private Call: General Radio Operation To receive a call from a group of users, your radio must be configured as part of that talkgroup. Receiving and Responding to a Private Call 1 You hear two alert tones and the LED blinks green. The backlight of the screen turns green and the display shows CALL RCV, alternating with the caller alias (name) or ID (number). 19 English 2 Press the Call Response button within 20 seconds after the call indicators begin. 3 Press and hold the PTT button to talk. Release the PTT button to listen. 4 Press the Call Response button to hang up and return to the Home screen. Procedure: When you receive a Telephone Call: 1 You hear a telephone-type ringing and the LED blinks green. The backlight of the screen turns green and the display shows PHN CALL. 2 Press the Call Response button within 20 seconds after the call indicators begin. You cannot initiate a Private Call. General Radio Operation Receiving and Responding to a Telephone Call (Trunking Only) This feature allows you to receive calls similar to standard phone calls from a landline phone. Note: 20 English The radio automatically exits the feature, if the time-out timer is enabled, when the radio is left idle and the timer expires. You will hear the Inactive Exit Tone upon feature exit. 3 Press and hold the PTT button to talk. Release the PTT button to listen. 4 Press the Call Response button to hang up and return to the Home screen. You cannot initiate a Telephone Call. Making a Radio Call • The preprogrammed Zone switch • The Channel Selector Knob Making a Talkgroup Call To make a call to a group of users, your radio must be configured as part of that talkgroup. Procedure: 1 Turn the Channel Selector Knob to select the channel with the desired talkgroup. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The REPEATER operation increases the radio’s range by connecting with other radios through a repeater. The transmit and receive frequencies are different. The DIRECT or “talkaround operation” allows you to bypass the repeater and connect directly to another radio. The transmit and receive frequencies are the same. Procedure: 1 Press the preprogrammed Repeater/Direct switch to toggle between talkaround and repeater modes. 2 The display shows RPTR MOD if the radio is currently in Repeater mode. OR The display shows DIR MODE and the Talkaround icon if the radio is currently in Direct mode (during conventional operation only). General Radio Operation You can select a zone, channel, or talkgroup by using: Repeater or Direct Operation 4 ASTRO Conventional Only: The LED lights up solid red. The display shows the talkgroup alias or ID. OR Trunking Only: The LED lights up solid red. 5 Speak clearly into the microphone. 6 Release the PTT button to listen. 21 English Monitoring Features General Radio Operation Radio users who switch from analog to digital radios often assume that the lack of static on a digital channel is an indication that the radio is not working properly. This is not the case. Digital technology quiets the transmission by removing the “noise” from the signal and allowing only the clear voice or data information to be heard. 22 Conventional Mode Operation Your radio may be preprogrammed to receive Private-Line® (PL) calls. Procedure: 1 Momentarily press the Monitor button to listen for activity. The Carrier Squelch indicator appears on the display. Use the Monitor feature to make sure a channel is clear before transmitting. 2 Press and hold the Monitor button to set continuous Monitoring a Channel 3 Press the Monitor button again, or the PTT button, to return Procedure: 1 Press the preprogrammed Monitor button. 2 Press and hold the Volume Set button to hear the volume set tone. 3 Adjust the Volume Control knob if necessary. 4 Release the Volume Set button. 5 Press and hold the PTT button to transmit. The LED lights up solid red. 6 Release the PTT button to receive (listen). The Carrier Squelch indicator appears on the display when you monitor a channel via the preprogrammed Monitor button. English monitor operation. The duration of the button press is programmable. to the original squelch setting. If you try to transmit on a receive-only channel, you hear an invalid tone until you release the PTT button. Advanced Features Receiving and Responding to a Selective Call (ASTRO Conventional Only) This feature allows you to receive a call from or to call a specific individual. It is intended to provide privacy and to eliminate the annoyance of having to listen to conversations that are of no interest to you. Procedure: 1 When you receive a Selective Call, you hear two alert tones and the LED lights up solid yellow. The backlight of the screen momentarily turns green and the display briefly shows CALL RCV. Advanced Features Use this navigation guide to learn more about advanced features available with your radio: Advanced Call Features . . . . . . . . . . . . . . . . . . . . . . . page 23 Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 25 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 26 Call Alert Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 28 Emergency Operation . . . . . . . . . . . . . . . . . . . . . . . . . page 28 Secure Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . page 32 Trunking System Controls . . . . . . . . . . . . . . . . . . . . . . page 35 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 37 Advanced Call Features 2 The speaker unmutes. 3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 4 Press and hold the PTT button to talk. Release the PTT button to listen. You cannot initiate a Selective Call. 23 English Using the Dynamic Regrouping Feature (Trunking Only) This feature allows the dispatcher to temporarily reassign selected radios to a single special channel so they can communicate with each other. This feature is typically used during special operations and is enabled by a qualified radio technician. You will not notice whether your radio has this feature enabled until a dynamic regrouping command is sent by the dispatcher. Advanced Features Note: If you try to access a zone or channel that has been reserved by the dispatcher as a dynamically regrouped mode for other users, an invalid tone sounds. Procedure: 1 When your radio is dynamically regrouped, it automatically switches to the dynamically regrouped channel. A “gurgle” tone sounds and the display shows the dynamically regrouped channel’s name. 2 Press the PTT button to talk. Release PTT button to listen. When the dispatcher cancels dynamic regrouping, the radio automatically returns to the zone and channel that you were using before the radio was dynamically regrouped. 24 English Requesting a Reprogram (Trunking Only) This feature lets you notify the dispatcher that you want a new dynamic regrouping assignment. Procedure: 1 Press the preprogrammed Reprogram Request button to send reprogram request to the dispatcher. 2 The display alternates between RPGM and PLS WAIT. 3 If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows ACK RCVD and the radio returns to the Home screen. OR If the dispatcher does not acknowledge the reprogram request within six seconds, a low-pitched alert tone sounds and the display shows NO ACK. The radio returns to the Home screen. Classifying Regrouped Radios • Select-enabled radios are free to change to any available channel, including the dynamic-regrouping channel, once the user has selected the dynamic-regrouping position. • Select-disabled radios cannot change channels while dynamically regrouped. The dispatcher has forced the radio to remain on the dynamic-regrouping channel. The Scan or Private Call feature cannot be selected while your radio is Select Disabled. Scan lists are created and assigned to individual channels/ groups. Your radio scans for voice activity by cycling through the channel/group sequence specified in the scan list for the current channel/group. Your radio can support up to 125 different scan lists. These lists must be preprogrammed by a qualified radio technician. Viewing a Scan List Procedure: Turn the 16-Position Select knob to view the members on the list. Advanced Features The dispatcher can classify regrouped radios into either of two categories: Select Enabled or Select Disabled. Scan Lists Viewing and Changing the Priority Status Procedure: 1 Press the Top Side (Select) button to change the priority status of the currently displayed channel or the scan list status icon of the currently displayed channel. 25 English 2 A Scan icon indicates that the current channel is in the scan Advanced Features list as a non-priority channel. The LED lights up solid green. OR A Priority-Two Channel Scan icon indicates that the current channel is in the scan list as the Priority-Two channel. The LED blinks green. OR A Priority-One Channel Scan icon indicates that the current channel is in the scan list as the Priority-One channel. The LED rapidly blinks green. You hear all traffic on the PriorityOne channel, regardless of traffic on non-priority channels. OR No icon indicates that the current channel is deleted from the scan list. 26 English Scan This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of channels. Turning Scan On or Off Procedure: 1 Press the preprogrammed Scan button, or turn the preprogrammed Scan switch to the Scan on or Scan off position. 2 The display shows SCAN ON and the scan icon, indicating that scan is enabled. OR The display shows SCAN OFF, indicating that scan is disabled. Making a Dynamic Priority Change (Conventional Note: Scan Only) This change remains in effect until scan is turned off. Scan then reverts to the preprogrammed (original) setting. Procedure: 1 When the radio is locked onto the channel to be deleted, press the preprogrammed Nuisance Delete button. 2 The radio continues scanning the remaining channels in the list. Procedure: 1 When the radio locks onto the channel designated as the new Priority-Two channel, press the preprogrammed Dynamic Priority button. 2 The radio continues scanning the remaining channels in the list. Deleting a Nuisance Channel If a channel continually generates unwanted calls or noise (termed a “nuisance” channel), you can temporarily remove the unwanted channel from the scan list. Restoring a Nuisance Channel Procedure: To restore the deleted nuisance channel, do one of the following: Advanced Features While the radio is scanning, the dynamic priority change feature allows you to temporarily assign any channel in a scan list (except for the Priority-One channel) as the Priority-Two channel. Deleting a “nuisance” channel is only possible through the preprogrammed Nuisance Channel Delete button. • Turn the radio off and then turning it on again. OR • Stop and restart a scan via the preprogrammed Scan button. OR • Change the channel via the 16-Position Select knob. This capability does not apply to priority channels or the designated transmit channel. 27 English Call Alert Paging This feature allows your radio to work like a pager. The Emergency feature is used to indicate a critical situation. Note: If the Top (Orange) button is preprogrammed to send an emergency signal, this signal overrides any other communication over the selected channel. This feature must be preprogrammed by a qualified radio technician. Receiving a Call Alert Page Procedure: 1 When you receive a Call Alert page, you hear four repeating alert tones and the LED blinks green. 2 The backlight of the screen turns green and the display briefly shows PAGE RCV. Advanced Features Emergency Operation You cannot send a Call Alert page. 28 English Your radio supports the following Emergency modes: • Emergency Alarm • Emergency Call (Trunking Only) • Emergency Alarm with Emergency Call • Silent Emergency Alarm Check with your dealer or system administrator for more information on the programming of this feature. Only one of the Emergency modes above can be assigned to the preprogrammed Emergency button. Note: To exit emergency at any time, press and hold the preprogrammed Emergency button for about a second. Sending an Emergency Call (Trunking Only) This feature allows you to send a data transmission, which identifies the radio sending the emergency, to the dispatcher. This feature gives your radio priority access on a channel. Procedure: 1 Press the preprogrammed Emergency button. 2 The display shows EMERGNCY and the current zone or channel. A short, medium-pitched tone sounds and the LED rapidly blinks red. OR An invalid tone sounds, if the selected channel does not support emergency. 3 When you receive the dispatcher’s acknowledgment, the display shows ACK RCVD. Four tones sound, the alarm ends, and the radio exits the Emergency Alarm mode. OR If no acknowledgement is received, the display shows NO ACK. The alarm ends and the radio exits the Emergency Alarm mode. Note: The radio operates in the normal dispatch manner while in Emergency Call, except, if enabled, it returns to one of the following: •Tactical/Non-Revert – You talk on the channel you selected before you entered the emergency state. •Non-Tactical/Revert – You talk on a preprogrammed emergency channel. The emergency alarm is sent on this same channel. Procedure: 1 Press the preprogrammed Emergency button. Advanced Features Sending an Emergency Alarm 2 The display shows EMERGNCY and the current zone or channel. A short, medium-pitched tone sounds and the LED rapidly blinks red. OR An invalid tone sounds, if the selected channel does not support emergency. 29 English 3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 4 Press and hold the PTT button. Speak clearly into the microphone. 5 Release the PTT button to end the transmission and wait for a response from the dispatcher. 6 Press and hold the preprogrammed Emergency button for about a second to exit the Emergency Call mode. 3 The radio enters the Emergency Call state when: You receive the dispatcher’s acknowledgment. The display shows ACK RCVD. OR You press the PTT button while in the Emergency Alarm mode. 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 5 Press and hold the PTT button. Speak clearly into the microphone. Sending an Emergency Alarm with Emergency Call Advanced Features Procedure: 1 Press the preprogrammed Emergency button. 2 The display shows EMERGNCY and the current zone or channel. A short, medium-pitched tone sounds and the LED rapidly blinks red. OR An invalid tone sounds, if the selected channel does not support emergency. 30 English 6 Release the PTT button to end the transmission and wait for a response from the dispatcher. 7 Press and hold the preprogrammed Emergency button for about a second to exit the Emergency Call mode. Using the Emergency Keep-Alive Feature This feature allows you to send an Emergency Alarm to another radio without any audio or visual indicators. This feature, when enabled, prevents the radio from being turned off via the On/Off Control knob when the radio is in the Emergency state. Procedure: 1 Press the preprogrammed Emergency button. Note: The radio only exits the Emergency state using one of the ways mentioned in the previous sections. 2 The display shows no changes, the LED does not light up, and you hear no tones. 3 The silent emergency state continues until you: Press and hold the preprogrammed Emergency button for about a second to exit the Silent Emergency Alarm mode. OR Press and release the PTT button to exit the Silent Emergency Alarm mode and enter regular dispatch or Emergency Call mode. Note: See Sending an Emergency Alarm on page 29, Sending an Emergency Call (Trunking Only) on page 29, Sending an Emergency Alarm with Emergency Call on page 30, or Sending a Silent Emergency Alarm on page 31. Advanced Features Sending a Silent Emergency Alarm For ALL Emergency signals, when changing channels: •If the new channel is also preprogrammed for Emergency, you can change channels while in Emergency operation. The emergency alarm or call continues on the new channel. •If the new channel is NOT preprogrammed for Emergency, the display shows NO EMERG, and you hear an invalid tone until you exit the Emergency state or change to a channel preprogrammed for Emergency. 31 English Advanced Secure Operations Secure radio operation provides the highest commercially available level of voice security on both trunked and conventional channels. Unlike other forms of security, Motorola digital encryption provides signaling that makes it virtually impossible for others to decode any part of an encrypted message. Selecting Secure Transmissions Advanced Features Procedure: Turn the preprogrammed Secure/Clear switch to the secure position. Note: 32 English If the selected channel is preprogrammed for clear-only operation – when you press the PTT button, an invalid mode tone sounds and the display shows CLR TX. The radio will not transmit until you set the Secure/ Clear switch to the clear position. Selecting Clear Transmissions Procedure: Turn the preprogrammed Secure/Clear switch to the clear position. Note: If the selected channel is preprogrammed for secureonly operation – when you press the PTT button, an invalid mode tone sounds and the display shows SEC TX. The radio will not transmit until you set the Secure/ Clear switch to the secure position. Using the Multikey Feature Loading an Encryption Key This feature allows the radio to be equipped with as many as 48 different encryption keys and supports the DES-OFB algorithm. Note: There are two types: Refer to the key-variable loader (KVL) manual for equipment connections and setup. Procedure: 1 Attach the KVL to your radio. 2 The display shows KEYLOAD, and all other radio functions, except for power down, backlight, and volume, are locked out. 3 Select the required keys and press the Menu Select button directly below LOAD on the KVL. This loads the encryption keys into your radio. 4 When the key has been loaded successfully, the radio sounds a short tone for single-key radios. OR When the key has been loaded successfully, the radio sounds an alternating tone for multikey radios. • Conventional Multikey – The encryption keys can be tied (strapped), on a one-per-channel basis, through radio service software. In addition, you can have operator-selectable keys, operator-selectable keysets, and operator-selectable key erasure. If talkgroups are enabled in conventional, then the encryption keys are strapped to the talkgroups. • Trunked Multikey – If you use your radio for both conventional and trunked applications, you have to strap your encryption keys for trunking on a per-talkgroup or announcement-group basis. In addition, you may strap a different key to other features, such as dynamic regrouping, failsoft, or emergency talkgroup. You can have operatorselectable key erasure. Advanced Features Managing Encryption 33 English Using the Key Zeroization Feature This feature allows you to erase all or selected encryption keys. Procedure: Use the preprogrammed Top Side (Select) button and Top (Orange) button to erase the single key in radios with the single-key option, and to erase all keys in radios with the multikey option. 1 Press and hold the Top Side (Select) button. 2 While holding Top Side (Select) button down, press the Top (Orange) button. Requesting an Over-the-Air Rekey (ASTRO Conventional Only) This feature, also known as OTAR, allows the dispatcher to reprogram the encryption keys in the radio remotely. The dispatcher performs the rekey operation upon receiving a rekey request from the user. Procedure: 1 Press and hold the preprogrammed Rekey Request button to send the rekey request. 2 If the rekey operation fails, a bad-key tone sounds and the display shows RKY FAIL. Advanced Features 3 The display shows PLS WAIT. 4 When all the encryption keys have been erased, the display shows ALL ERASED. Note: 34 English DO NOT press the Top (Orange) button before pressing the Top Side (Select) button, unless you are in an emergency situation as this sends an emergency alarm. Note: The rekey operation failure indicates that your radio does not contain the Unique Shadow Key (USK). This key must be loaded into the radio with the key-variable loader (KVL) before the rekey request can be sent. Refer to your local key management supervisor for more information. Trunking System Controls The failsoft system ensures continuous radio communications during a trunked system failure. If a trunking system fails completely, the radio goes into failsoft operation and automatically switches to its failsoft channel. Procedure: 1 During failsoft operation, your radio transmits and receives in conventional operation on a predetermined frequency. 2 A medium-pitched tone sounds every 10 seconds and the display shows FAILSOFT. When your radio goes out of the range of the system, it can no longer lock onto a control channel. Procedure: 1 A low-pitched tone sounds. AND/OR The display shows the currently selected zone/channel combination and OUT RNG. 2 Your radio remains in this out-of-range condition until: It locks onto a control channel. OR It locks onto a failsoft channel. OR It is turned off. Advanced Features Using the Failsoft System Going Out of Range When the trunking system returns to normal operation, your radio automatically leaves failsoft operation and returns to trunked operation. 35 English Using the Site Trunking Feature Viewing and Changing a Site If the zone controller loses communication with any site, that site reverts to site trunking. This feature allows you to view the number of the current site or force your radio to change to a new one. The display shows the currently selected zone/channel combination and STE TRNK. Viewing the Current Site Note: When this occurs, you can communicate only with other radios within your trunking site. Advanced Features Locking and Unlocking a Site This feature allows your radio to lock onto a specific site and not roam among wide-area talkgroup sites. This feature should be used with caution, since it inhibits roaming to another site in a wide-area system. Procedure: 1 Use the preprogrammed Site Lock/Unlock button to toggle the lock state between locked and unlocked. 2 The radio saves the new site lock state and returns to the Home screen. 36 English Procedure: 1 Press the preprogrammed Site Search button. 2 The display momentarily shows the name of the current site and its corresponding received signal strength indicator (RSSI). Changing the Current Site Procedure: 1 Press and hold down the preprogrammed Site Search button. 2 A tone sounds and the display momentarily shows SCANNING. 3 When the radio finds a new site, it returns to the Home screen. Utilities Procedure: Using the Flip Display This feature allows you to flip the content of the top display upside down. It is particularly useful when you would like to read the top display while the radio is still in the carry holder attached to your belt. Procedure: Press and hold the preprogrammed Light button to flip the display. position between Bank 1 and Bank 2. 2 The top display shows the status icons (A, B, C, D, E or F) or the zone name based on the bank and switch position selected. See Zone Bank 1 and Zone Bank 2 on page 12 for more information on the status icons. Selecting the Power Level Selecting a Zone Bank You can select the power level at which your radio transmits. The radio always turns on to the default setting. This feature allows twice as many zones to be accessed from a switch, doubling the amount of switch positions. Note: Note: Settings: The Zone Select feature must to be preprogrammed to the 3-position A-B-C switch, while the Zone Bank feature must be preprogrammed to any side button or Top (Orange) button before you can use this feature. Advanced Features 1 Use the preprogrammed Zone Bank button to toggle the This feature must be preprogrammed by a qualified radio technician. • Select Low for a shorter transmitting distance and to conserve power. • Select High for a longer transmitting distance. 37 English Procedure: Turning Voice Mute On or Off 1 Press the preprogrammed Transmit Power Level Switch You can enable and disable voice transmission, if needed. to toggle the power level between low and high power. 2 The display shows LOW PWR and the low power icon. OR The display shows HIGH PWR and the high power icon. Procedure: 1 Press the preprogrammed Voice Mute button to turn the feature off or on. 2 The display momentarily shows VMUT OFF, and a short tone Controlling the Display Backlight Advanced Features You can enable or disable the radio’s display backlight as needed, if poor light conditions make the display difficult to read. Procedure: Press the preprogrammed Light button to toggle the backlight on or off. OR Press any programmable radio controls or buttons to turn the backlight on. Note: 38 English The backlight remains on for a preprogrammed time before it automatically turns off completely or returns to the minimum backlight level. sounds, indicating that the feature is disabled. OR The display momentarily shows VMUT ON, and a short tone sounds, indicating that the feature is enabled. Using the Time-Out Timer This feature turns off your radio’s transmitter. You cannot transmit longer than the preset timer setting. If you attempt to do so, the radio automatically stops your transmission, and you hear a talk-prohibit tone. Note: You will hear a brief, low-pitched, warning tone four seconds before the transmission times out. Procedure: 1 Hold down the PTT button longer than the preprogrammed time. You hear a short, low-pitched warning tone, the transmission is cut-off, and the LED goes out until you release the PTT button. 2 Release the PTT button. The timer resets. 3 Press the PTT button to re-transmit. The time-out timer Using the Conventional Squelch Operation Features This feature filters out unwanted calls with low signal strength or channels that have a higher than normal background noise. Analog Options Tone Private Line (PL), Digital Private-Line (DPL), and carrier squelch can be available (preprogrammed) per channel. Mode Result Carrier squelch (C) You hear all traffic on a channel. PL or DPL The radio responds only to your messages. Advanced Features The timer is defaulted at 60 seconds, but it can be preprogrammed from 3 to 120 seconds, in 15-second intervals, or it can be disabled entirely for each radio mode, by a qualified radio technician. restarts and the LED lights up solid red. 39 English Digital Options Using the PL Defeat Feature One or more of the following options may be preprogrammed in your radio. Check with your dealer or system administrator for more information. This feature allows you to override any coded squelch (DPL or PL) that might be preprogrammed to a channel. The radio will also unmute to any digital activity on a digital channel. Option Advanced Features Digital Carrier-Operated Squelch (COS) 40 English Result You hear any digital traffic. Normal Squelch You hear any digital traffic having the correct network access code. Selective Switch You hear any digital traffic having the correct network access code and correct talkgroup. Procedure: Place the preprogrammed PL Defeat switch in the PL Defeat position. You hear any activity on the channel. OR The radio is muted if no activity is present. Note: When this feature is active, the Carrier Squelch status indicator is displayed. Using the Digital PTT ID Feature Your radio’s ID number is also automatically sent every time the PTT button is pressed. This is a per-channel feature. For digital voice transmissions, your radio’s ID is sent continuously during the voice message. Using the Smart PTT Feature (Conventional Only) Smart PTT is a per-personality, programmable feature used in conventional radio systems to keep radio users from talking over other radio conversations. When smart PTT is enabled in your radio, you cannot transmit on an active channel. Three variations of smart PTT are available: Transmit Inhibit on Busy Channel with Carrier You cannot transmit if any traffic is detected on the channel. Transmit Inhibit on Busy Channel with Wrong Squelch Code You cannot transmit on an active channel with a squelch code or (if secure-equipped) encryption key other than your own. If the PL code is the same as yours, the transmission is not prevented. Quick-Key Override This feature can work in conjunction with either of the two above variations. You can override the transmit-inhibit state by quick-keying the radio. In other words, two PTT button presses within the preprogrammed time limit. Advanced Features This feature allows you to see the radio ID (number) of the radio from whom you are currently receiving a transmission. This ID, consisting up to a maximum of eight characters, can be viewed by both the receiving radio and the dispatcher. If you try to transmit on an active smart-PTT channel, you hear an alert tone, and the transmission is inhibited. The LED lights up solid yellow to indicate that the channel is busy. 41 English Caring for Your Radio Helpful Tips Take a moment to review the following: Caring for Your Radio . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning Your Radio . . . . . . . . . . . . . . . . . . . . . . . . Handling Your Radio . . . . . . . . . . . . . . . . . . . . . . . . Servicing Your Radio . . . . . . . . . . . . . . . . . . . . . . . . Taking Care of the Battery. . . . . . . . . . . . . . . . . . . . . . Checking the Battery Charge Status . . . . . . . . . . . . Battery Recycling and Disposal. . . . . . . . . . . . . . . . page 42 page 43 page 43 page 44 page 44 page 44 page 45 • The APX 7000 radio casting has a vent port that allows for pressure equalization in the radio. Never poke this vent with any objects, such as needles, tweezers, or screwdrivers. This could create leak paths into the radio and the radio’s submergibility will be lost. Vent Port Helpful Tips • (For APX 7000 R Radios Only) 42 English The APX 7000 R radio is designed to be submerged to a maximum depth of 6 feet, with a maximum submersion time of 2 hours. Exceeding either maximum limit may result in damage to the radio. Elastomer technology materials used for seals in rugged portable radios can age with time and environmental exposure. Therefore, Motorola recommends that rugged radios be checked annually as a preventive measure in order to assure the watertight integrity of the radio. Motorola details the disassembly, test, and reassembly procedures along with necessary test equipment needed to inspect, maintain and troubleshoot radio seals in the radio’s service manual. • If the radio battery contact area has been submerged in water, dry and clean the radio battery contacts before attaching a battery to the radio. Otherwise, the water could short-circuit the radio. • If the radio has been submerged in water, shake the radio well so that any water that may be trapped inside the speaker grille and microphone port can be removed. Otherwise, the water will decrease the audio quality of the radio. • Do not disassemble the radio. This could damage radio seals and result in leak paths into the radio. Any radio maintenance should be performed only by a qualified radio technician. Cleaning Your Radio To clean the external surfaces of your radio: 1 Combine one teaspoon of mild dishwashing detergent to one gallon of water (0.5% solution). 2 Apply the solution sparingly with a stiff, non-metallic, shortbristled brush, making sure excess detergent does not get entrapped near the connectors, controls or crevices. Dry the radio thoroughly with a soft, lint-free cloth. Helpful Tips • (For APX 7000 R Radios Only) 3 Clean battery contacts with a lint-free cloth to remove dirt or grease. Do not use solvents to clean your radio. Spirits may permanently damage the radio housing. Do not submerge the radio in the detergent solution. Handling Your Radio • Do not pound, drop, or throw the radio unnecessarily. Never carry the radio by the antenna. • Avoid subjecting the radio to an excess of liquids. Do not submerge the radio unless it is a ruggedized, APX 7000 R model. 43 English • Avoid subjecting the radio to corrosives, solvents or spirits. Taking Care of the Battery • Do not disassemble the radio. • Keep the accessory-connector cover in place until ready to use the connector. Replace the cover immediately once the accessory has been disconnected. Helpful Tips Servicing Your Radio Proper repair and maintenance procedures will assure efficient operation and long life for this product. A Motorola maintenance agreement will provide expert service to keep this and all other communication equipment in perfect operating condition. A nationwide service organization is provided by Motorola to support maintenance services. Through its maintenance and installation program, Motorola makes available the finest service to those desiring reliable, continuous communications on a contract basis. For a contract service agreement, please contact your nearest Motorola service or sales representative, or an authorized Motorola dealer. Express Service Plus (ESP) is an optional extended service coverage plan, which provides for the repair of this product for an additional period of either one or two years beyond the normal expiration date of the standard warranty. For more information about ESP, contact the Motorola Radio Support Center at 3761 South Central Avenue, Rockford, IL 61102 (800) 227-6772 / (847)725-4200. 44 English Checking the Battery Charge Status Your radio can indicate the battery’s charge status through: • the LED and sounds. • the fuel gauge icon on the display. LED and Sounds When your battery is low: • the LED blinks red when the PTT button is pressed. • you hear a low-battery “chirp” (short, high-pitched tone). Fuel Gauge Icon A blinking fuel gauge icon ( ) is displayed only when the battery voltage drops to low level. In this case, replace the battery with a fully charged one. Battery Recycling and Disposal 76% to 100% full In the U.S. and Canada, Motorola participates in the nationwide Rechargeable Battery Recycling Corporation (RBRC) program for NiCd battery collection and recycling. Many retailers and dealers participate in this program. 51% to 75% 26% to 50% 11% to 25% 10% or less (at 10%, the gauge begins blinking) For the location of the drop-off facility closest to you, access RBRC's Internet web site at www.rbrc.com or call 1-800-8BATTERY. This internet site and telephone number also provide other useful information concerning recycling options for consumers, businesses, and governmental agencies. Helpful Tips Battery Charge Gauge 45 English Accessories Your radio is compatible with the approved accessories listed in this chapter. Contact your dealer for details. Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46 Batteries and Battery Accessories . . . . . . . . . . . . . . . page 46 Carry Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46 Belt Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46 Belt Loops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46 Carry Cases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46 Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 47 Audio Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . page 48 Antennas Accessories • 800 MHz, GPS Antenna (NAF5085_) • 700/800 MHz, VHF GPS Antenna (NAR6591_) • GPS Antenna (NAG4000_) Batteries and Battery Accessories • 2000 mAh, IMPRESTM NiMH (FM), IP57 Rugged (NNTN7035_) 46 • 2000 mAh, IMPRESTM NiMH (FM), IP57 (NNTN7036_) English • 2100 mAh, IMPRESTM NiMH (Std), IP57 (NNTN7037_) • 2500 mAh, IMPRESTM Li-Ion, IP57 (NNTN7038_) • 2100 mAh, IMPRESTM NiMH (Std), IP57 Rugged (NNTN7573_) Carry Accessories Belt Clips • Belt Clip, 3", Plastic (HLN6875_) • Belt Clip Kit, 2.5", Plastic (Compatible with Clamshell Batteries) (NTN8266_) Belt Loops • Swivel Belt Loop, 2.5" (PMLN5407_) • Swivel Belt Loop, 2.75" Replacement Metal (Stainless Steel) (PMLN5408_) • Swivel Belt Loop, 3" (PMLN5409_) Carry Cases • Nylon Carry Case with 3” Fixed Belt Loop and T-Strap, for Short Radio (PMLN5322_) • Hard Leather Carry Case with 3” Fixed Belt Loop, D-Rings, and T-Strap, for Short Radio (PMLN5323_) • Hard Leather Carry Case (High Activity) with 2.75” Swivel • Nylon Carry Case with 3” Fixed Belt Loop and T-Strap, for Long Radio (PMLN5328_) • Hard Leather Carry Case with 3” Fixed Belt Loop, D-Rings, and T-Strap, for Long Radio (PMLN5329_) • Hard Leather Carry Case (High Activity) with 2.75” Swivel Belt Loop, D-Rings, and T-Strap, for Long Radio (PMLN5330_) • Carry Strap (NTN5243_) • IMPRESTM Multi-Unit, Display (UK Plug) (NNTN7074_) • IMPRESTM Multi-Unit, Display (Argentina Plug) (NNTN7075_) • IMPRESTM Multi-Unit, Display (US Plug, Euro User Guide) (NNTN7076_) • IMPRESTM Multi-Unit, Display (Korean Plug) (NNTN7077_) • IMPRESTM Multi-Unit, Display (Euro Plug) (NNTN7086_) Accessories Belt Loop, D-Rings, and T-Strap, for Short Radio (PMLN5324_) • IMPRESTM Multi-Unit, Display (US Plug) (NNTN7073_) • IMPRESTM Multi-Unit, Non-Display (US Plug) (NNTN7065_) • IMPRESTM Multi-Unit, Non-Display (Euro Plug) Chargers (NNTN7066_) • IMPRESTM Multi-Unit, Non-Display (UK Plug) (NNTN7067_) • IMPRESTM Single-Unit (US Plug) (NNTN7080_) • IMPRESTM Single-Unit (Euro Plug) (NNTN7081_) • IMPRESTM Single-Unit (UK Plug) (NNTN7082_) • IMPRESTM Single-Unit (Aust, NZ Plug) (NNTN7083_) • IMPRESTM Single-Unit (Argentina Plug) (NNTN7084_) • IMPRESTM • IMPRESTM Single-Unit (US Plug, Euro User Guide) (NNTN7085_) • IMPRESTM Multi-Unit, Non-Display (Aust, NZ Plug) (NNTN7068_) • IMPRESTM Multi-Unit, Non-Display (Argentina Plug) (NNTN7069_) • IMPRESTM Multi-Unit, Non-Display (US Plug, Euro User Guide) (NNTN7070_) • IMPRESTM Multi-Unit, Non-Display (Korean Plug) (NNTN7071_) Single-Unit (Korean Plug) (NNTN7261_) • IMPRESTM Multi-Unit, Display (Aust, NZ Plug) (NNTN7063_) 47 English Audio Accessories • Small Remote Speaker Microphone, IP54, 3.5 mm Jack, Receive Only (PMMN4024_) • Small Remote Speaker Microphone, IP54, 3.5 mm Jack (PMMN4025_) • Noise Canceling Remote Speaker Microphone, IP54, 3.5 mm Jack (PMMN4062_) • Public Safety Microphone, 18 inch, IP55, 3.5 mm Jack (PMMN4059_) • Public Safety Microphone, 24 inch, IP55, 3.5 mm Jack (PMMN4060_) • Public Safety Microphone, 30 inch, IP55, 3.5 mm Jack (PMMN4061_) Accessories • Heavy-Duty Headset (PMLN5275_) • Lightweight Headset (RMN5058_) • Earbud for Remote Speaker Microphone, 3.5 mm Jack, Short Coiled Cable, Receive Only (RLN4885_) • Earpiece with Translucent Tube for Remote Speaker Microphone, 3.5 mm Jack, Short Coiled Cable, Receive Only (RLN4941_) • Ear Receiver for Remote Speaker Microphone, 3.5 mm Jack, Short Coiled Cable, Receive Only (WADN4190_) 48 • 1-Wire, Receive Only Earpiece, Black (RLN5878_) English • 1-Wire, Receive Only Earpiece, Beige (RLN5879_) • 2-Wire, One Programmable Button, Black (RLN5880_) • 2-Wire, One Programmable Button, Beige (RLN5881_) • 2-Wire with Translucent Tube, One Programmable Button, Black (RLN5882_) • 2-Wire with Translucent Tube, One Programmable Button, Beige (RLN5883_) • 3-Wire with Translucent Tube, One Programmable Button, Black (PMLN5111_) • 3-Wire with Translucent Tube, One Programmable Button, Beige (PMLN5112_) • Low Noise Kit (RLN5886_) • High Noise Kit (RLN5887_) State the position of the vessel in distress, using any information that will help responders to locate you, e.g.: • latitude and longitude • bearing (state whether you are using true or magnetic north) • distance to a well-known landmark • vessel course, speed or destination State the nature of the distress. Specify what kind of assistance you need. State the number of persons on board and the number needing medical attention, if any. If you are in imminent and grave danger at sea and require emergency assistance, use VHF Channel 16 to send a distress call to nearby vessels and the United States Coast Guard. Transmit the following information, in this order: 1 “MAYDAY, MAYDAY, MAYDAY.” Mention any other information that would be helpful to responders, such as type of vessel, vessel length and/or tonnage, hull color, etc. “OVER.” 11 If you do not receive an immediate response, remain by the radio and repeat the transmission at intervals until you receive a response. Be prepared to follow any instructions given to you. Take a moment to review the following: Special Channel Assignments . . . . . . . . . . . . . . . . . . . page 49 Operating Frequency Requirements . . . . . . . . . . . . . . page 50 Special Channel Assignments Emergency Channel “THIS IS _____________________, CALL SIGN __________.” State the name of the vessel in distress 3 times, followed by the call sign or other identification of the vessel, stated 3 times. Repeat “MAYDAY” and the name of the vessel. “WE ARE LOCATED AT _______________________.” Appendix: Maritime Radio Use in the VHF Frequency Range Appendix: Maritime Radio Use in the VHF Frequency Range 10 Wait for a response. Non-Commercial Call Channel For non-commercial transmissions, such as fishing reports, rendezvous arrangements, repair scheduling, or berthing information, use VHF Channel 9. 49 English Appendix: Maritime Radio Use in the VHF Frequency Range Operating Frequency Requirements A radio designated for shipboard use must comply with Federal Communications Commission Rule Part 80 as follows: • on ships subject to Part II of Title III of the Communications Act, the radio must be capable of operating on the 156.800 MHz frequency • on ships subject to the Safety Convention, the radio must be capable of operating: • • in the simplex mode on the ship station transmitting frequencies specified in the 156.025 – 157.425 MHz frequency band, and in the semiduplex mode on the two frequency channels specified in the table below. Note: Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters. Additional information about operating requirements in the Maritime Services can be obtained from the full text of FCC Rule Part 80 and from the US Coast Guard. Table A-1: VHF Marine Channel List Frequency (MHz) Table A-1: VHF Marine Channel List (Continued) Frequency (MHz) Channel Number Transmit Receive 156.150 160.750 156.200 160.800 156.250 160.850 156.300 – 156.350 160.950 156.400 – 156.450 156.450 10 156.500 156.500 11 156.550 156.550 12 156.600 156.600 13** 156.650 156.650 14 156.700 156.700 15** 156.750 156.750 16 156.800 156.800 17** 156.850 156.850 18 156.900 161.500 156.950 161.550 Channel Number Transmit Receive 19 156.050 160.650 20 157.000 161.600 160.700 157.050 161.650 22 157.100 161.700 50 English 156.100 Table A-1: VHF Marine Channel List (Continued) Table A-1: VHF Marine Channel List (Continued) Frequency (MHz) Transmit 157.150 24 157.200 161.800 25 157.250 161.850 26 157.300 161.900 27 157.350 28 157.400 60 Frequency (MHz) Receive Channel Number Transmit Receive 161.750 75 *** *** 76 *** *** 77** 156.875 – 78 156.925 161.525 161.950 79 156.975 161.575 162.000 80 157.025 161.625 156.025 160.625 157.075 161.675 156.075 160.675 157.125 161.725 62 156.125 160.725 157.175 161.775 63 156.175 160.775 84 157.225 161.825 156.225 160.825 85 157.275 161.875 65 156.275 160.875 86 157.325 161.925 66 156.325 160.925 87 157.375 161.975 67** 156.375 156.375 88 157.425 162.025 68 156.425 156.425 69 156.475 156.475 71 156.575 156.575 72 156.625 – 73 156.675 156.675 74 156.725 156.725 Appendix: Maritime Radio Use in the VHF Frequency Range Channel Number Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters. ** Low power (1 W) only *** Guard band Note: A – in the Receive column indicates that the channel is transmit only. 51 English
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2009:07:14 13:23:45-04:00 Modify Date : 2009:07:14 13:28:03-04:00 Metadata Date : 2009:07:14 13:28:03-04:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:AC4592FF9A70DE1180B7A4079C53EC55 Instance ID : uuid:d7f9332a-7204-4219-a7fa-2331eedc3cdf Derived From Instance ID : uuid:b7e929e9-940e-4a9c-8780-fc36d8deaa59 Derived From Document ID : uuid:014369ba-9cb0-4477-8723-655dd2682ad5 Format : application/pdf Title : APX 7000 Portable Top Display User Guide Creator : ccl207 Has XFA : No Page Count : 62 Author : ccl207EXIF Metadata provided by EXIF.tools