Motorola Solutions 89FT7052 Portable VoWLAN Transceiver with Bluetooth User Manual Exhibit 8 Users Manual Warning Pg

Motorola Solutions, Inc. Portable VoWLAN Transceiver with Bluetooth Exhibit 8 Users Manual Warning Pg

UserManual.wiki >

Motorola Solutions >

89FT7052 User Manual >

Exhibit 8 Users Manual Warning Pg HTML Version

Exhibit 8 Users Manual Warning Pg

EWP2000 AND

EWP3000 SERIES

BUSINESS

SMARTPHONE

REGULATORY GUIDE

Motorola reserves the right to make changes to any product to improve reliability,

function, or design.

Motorola does not assume any product liability arising out of, or in connection with, the

application or use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under

any patent right or patent, covering or relating to any combination, system, apparatus,

machine, material, method, or process in which Motorola products might be used. An

implied license exists only for equipment, circuits, and subsystems contained in

Motorola products.

Warranty

For the complete Motorola hardware product warranty statement, go to:

http://www.motorola.com/enterprisemobility/warranty.

123

6802987C72 Rev. B — February 2012

Motorola Solutions, Inc.

1301 E. Algonquin Rd.

Schaumburg, IL 60196-1078, U.S.A.

http://www.motorolasolutions.com

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are

trademarks or registered trademarks of Motorola Trademark Holdings, LLC

and are used under license. All other trademarks are the property of their

respective owners.

@6802987C72@

BEFORE USING THIS ENTERPRISE WiFi PHONE (EWP), READ THIS BOOKLET

WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE

AND RF ENERGY AWARENESS AND CONTROL INFORMATION AND

OPERATIONAL INSTRUCTIONS FOR COMPLIANCE WITH RF ENERGY

EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL

STANDARDS. ALSO READ THE OPERATIONAL INSTRUCTIONS FOR SAFE

USAGE.

Regulatory Information

This device is approved under Motorola Solutions, Inc.

This guide applies to the following Model Numbers: EWP2200 and EWP3200.

All Motorola devices are designed to be compliant with rules and regulations in locations

they are sold and will be labeled as required.

Local language translations are available at the following website:

supportcentral.motorola.com

Any changes or modifications to Motorola equipment, not expressly approved by

Motorola, could void the user's authority to operate the equipment.

Declared maximum operating temperature: 50°C (122°F).

Bluetooth

Wireless Technology

This is an approved Bluetooth product. For more information or to view the End Product

Listing, please visit:

http://www.bluetooth.org/tpg/listings.cfm.

Wireless Devices Country Approvals

Regulatory markings, subject to certification, are applied to the device signifying the

radio(s) are approved for use in the following countries: United States, Canada, S.

Korea, Australia, and Europe1.

Please refer to the Motorola Declaration of Conformity (DoC) for details of other country

markings. This is available at:

www.motorola.com/enterprisemobility/doc.

Note 1: For 2.4GHz or 5GHz Products: Europe includes Austria, Belgium, Bulgaria,

Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.

Country Roaming

This device incorporates the International Roaming feature (IEEE802.11d) which will

ensure the product operates on the correct channels for the particular country of use.

Frequency of Operation - FCC and IC

5 GHz Only

The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150-5250

MHz band is restricted to Indoor Use Only; any other use will make the operation of this

device illegal.

Industry Canada Statement:

2.4 GHz Only

The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The

range of channels is limited by firmware.

Health and Safety Recommendations

Ergonomic Recommendations

•

Reduce or eliminate repetitive motion

•

Maintain a neutral postures

•

Reduce or eliminate excessive force

•

Keep objects that are used frequently within easy reach

•

Perform tasks at correct heights

•

Reduce or eliminate vibration

•

Reduce or eliminate direct pressure

•

Provide adjustable workstations

•

Provide adequate clearance

•

Provide a suitable working environment

•

Improve work procedures

RF Energy Exposure

This Enterprise WiFi Phone is intended for use in general population/uncontrolled

environment.

This Enterprise WiFi Phone uses electromagnetic energy in the radio frequency (RF)

spectrum to provide communications between two or more users over a distance. It

uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy

is one form of electromagnetic energy. Other forms include, but are not limited to,

sunlight and x-rays. RF energy, however, should not be confused with these other forms

of electromagnetic energy, which when used improperly, can cause biological damage.

Very high levels of x-rays, for example, can damage tissues and genetic material.

Experts in science, engineering, medicine, health, and industry work with organizations

to develop standards for safe exposure to RF energy. These standards provide

recommended levels of RF exposure for both workers and the general public. These

recommended RF exposure levels include substantial margins of protection.

All Motorola radio products are designed, manufactured, and tested to ensure they meet

government-established RF exposure levels. In addition, manufacturers also

recommend specific operating instructions to users of products with radios.

These instructions are important because they inform users about RF energy exposure

and provide simple procedures on how to control it.

Please refer to the following websites for more information on what RF energy exposure

is and how to control your exposure to assure compliance with established RF exposure

limits:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html

http://www.osha.gov/SLTC/radiofrequencyradiation/ index.html

Compliance with RF Exposure Standards

Your Motorola Enterprise WiFi Phone is designed and tested to comply with a number of

national and International standards and guidelines (listed below) for human exposure

to radio frequency electromagnetic energy.

This Enterprise WiFi Phone complies with the IEEE (FCC) and ICNIRP exposure limits

for general population/uncontrolled environments.

Your Motorola Enterprise WiFi Phone complies with the following RF energy exposure

standards and guidelines:

•

United States Federal Communications Commission,

•

Code of Federal Regulations; 47 CFR part 2 sub-part J

•

American National Standards Institute (ANSI) / Institute of Electrical and Electronic

Engineers (IEEE) C95. 1-1992

•

Institute of Electrical and Electronic Engineers (IEEE)

•

C95.1-1999 Edition

•

Institute of Electrical and Electronic Engineers (IEEE)

•

C95.1-2005 Edition

•

International Commission on Non- Ionizing Radiation Protection (ICNIRP) 1998

•

Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio

frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz,

1999

•

Australian Communications Authority Radio communications (Electromagnetic

Radiation – Human Exposure) Standard, 2003

•

ANATEL ANNEX to Resolution No. 303 of July 2, 2002

"Regulation of limitation of exposure to electrical, magnetic and electromagnetic

fields in the radio frequency range between 9 KHz and 300 GHz" and "Attachment to

resolution # 303 from July 2, 2002".

The device complies with Internationally recognized standards covering human

exposure to electromagnetic fields from radio devices. For information on "International"

human exposure to electromagnetic fields refer to the Motorola Declaration of

Conformity (DoC) at:

www.motorola.com/enterprisemobility/doc.

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the instructions supplied.

RF Exposure Operating Instructions

To control your exposure and ensure compliance with the general population/

uncontrolled environment exposure limits, always adhere to the following procedures:

•

When worn on the body, always place the Enterprise WiFi Phone in a Motorola-

approved clip, holder, holster, case, or body harness for this product. Using

approved body-worn accessories is important because the use of non-Motorola-

approved accessories may result in exposure levels, which exceed the IEEE/

ICNIRP general population/uncontrolled environment RF exposure limits.

Phone Mode - Operating Instructions

When placing or receiving a phone call, hold the product as you would a wireless

telephone, and talk directly into the microphone.

Handheld Devices

This device was tested for typical body-worn operation. Use only Motorola tested and

approved belt-clips, holsters, and similar accessories to ensure EU Compliance.

US and Canada

Phones (placed to ear or used with headset)

Use only Motorola tested and approved belt-clips, holsters, and similar accessories to

ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar

accessories may not comply with FCC RF exposure compliance requirements, and

should be avoided. The FCC has granted an Equipment Authorization for these model

phones with all reported SAR levels evaluated as in compliance with the FCC RF

emission guidelines. SAR information on these model phones is on file with the FCC

and can be found under the Display Grant section of:

http://www.fcc.gov/oet/fccid.

Co-located statement

To comply with FCC RF exposure compliance requirement, the antenna used for this

transmitter must not be co-located or operating in conjunction with any other transmitter/

antenna except those already approved in this filling.

Handheld Devices

This device was tested for typical body-worn operation. Use only Motorola tested and

approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The

use of third-party belt-clips, holsters, and similar accessories may not comply with FCC

RF exposure compliance requirements, and should be avoided.

Approved Accessories

Use only Motorola-approved supplied or replacement, batteries, and accessories. Use

of non–Motorola batteries and accessories may exceed IEEE/ICNIRP RF exposure

guidelines.

For a list of Motorola-approved batteries and other accessories please see your dealer

or local Motorola contact. Your nearest dealer can be found at the following web site:

http://www.motorola.com/cgiss/emea/dealerlocator.html

Additional Information

For additional information on exposure requirements or other training information, visit:

http://www.motorola.com/rfhealth.

Please observe all warning notices with regard to the usage of wireless devices.

Electromagnetic Interference/Compatibility

NOTE Nearly every electronic device is susceptible to electromagnetic interference

(EMI) if inadequately shielded, designed or otherwise configured for electromagnetic

compatibility.

To avoid electromagnetic interference and/or compatibility conflicts, turn off your

Enterprise WiFi Phone in any facility where posted notices instruct you to do so.

Hospitals or health care facilities may be using equipment that is sensitive to external

RF energy.

When instructed to do so, turn off your Enterprise WiFi Phone when on board an

aircraft. Any use of an Enterprise WiFi Phone must be in accordance with applicable

regulations per airline crew instructions.

If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in

flight.

Wireless devices transmit radio frequency energy and may affect medical electrical

equipment.

Wireless devices should be switched off wherever you are requested to do so in

hospitals, clinics or healthcare facilities. These requests are designed to prevent

possible interference with sensitive medical equipment.

Pacemakers

The Advanced Medical Technology Association (AdvaMed) recommends that a

minimum separation of 15 cms (6 inches) be maintained between an Enterprise WiFi

Phone with wireless radios and a pacemaker. These recommendations are consistent

with those of the U.S. Food and Drug Administration.

Persons with pacemakers should:

•

ALWAYS keep the Enterprise WiFi Phone more than 15 cms from their pacemaker

when the Enterprise WiFi Phone is turned ON.

•

Not carry the Enterprise WiFi Phone in the breast pocket.

•

Use the ear opposite the pacemaker to minimize the potential for interference.

•

Turn the Enterprise WiFi Phone OFF immediately if you have any reason to suspect

that interference is taking place.

CAUTION Use only Motorola approved and UL Listed accessories, battery

packs and battery chargers.

Do NOT attempt to charge damp/wet devices or batteries. All

components must be dry before connecting to an external power

source.

RISK OF EXPLOSION IF BATTERY IS REPLACED WITH

INCORRECT TYPE. DISPOSE OF USED BATTERIES

ACCORDING TO THE BATTERY MANUFACTURER’S

INSTRUCTIONS.

CAUTION Operation of the device without regulatory approval is illegal.

CAUTION The device for the band 5150-5250 MHz is only for indoor usage

to reduce potential for harmful interference to co-Channel mobile

satellite systems. High power radars are allocated as primary

users (meaning they have priority) of 5250-5350 MHz and 5650-

5850 MHz and these radars could cause interference and/or

damage to LE-LAN devices.

AVERTISSEMENT Le dispositive fonctionnant dans la bande 5150-5250 MHz

est réservé uniquement pour une utilisation à l'intérieur afin

de réduire les risques de brouillage préjudiciable aux

systèmes de satellites mobiles utilisant les mêmes canaux.

Les utilisateurs de radars de haute puissance sont désignés

utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les

bands 5250-5350 MHz et 5650-5850 MHz et que ces

radars pourraient causer du brouillage et/ou des dommages

aux dispositifs LAN-EL.

CAUTION In order to avoid or minimize the potential risk of ergonomic injury

follow the recommendations below. Consult with your local Health &

Safety Manager to ensure that you are adhering to your company’s

safety programs to prevent employee injury.

Safety in Hospitals

5 6 74

Hearing Aids

Some digital Enterprise WiFi Phone with wireless radios may interfere with some

hearing aids. In the event of such interference, you may want to consult your hearing aid

manufacturer to discuss alternatives.

When some wireless devices are used near some hearing devices (hearing aids and

cochlear implants), users may detect a buzzing, humming, or whining noise. Some

hearing devices are more immune than others to this interference noise, and wireless

devices also vary in the amount of interference they generate. In the event of

interference you may want to consult your hearing aid supplier to discuss solutions.

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to

determine if it is adequately shielded from RF energy. Your physician may be able to

assist you in obtaining this information.

Use of Communication Devices While Driving

Always check the laws and regulations on the use of radios in the areas where you

drive.

•

Give full attention to driving and to the road.

•

Use hands-free operation, if available.

•

Pull off the road and park before making or answering a call, if driving conditions or

regulations so require.

For Vehicles with Air Bags

Refer to vehicle manufacturer's manual prior to installation of electronic equipment to

avoid interference with air bag wiring.

Do not place the Enterprise WiFi Phone in the area over an air bag or in the air bag

deployment area. Air bags inflate with great force. If an Enterprise WiFi Phone is placed

in the air bag deployment area and the air bag inflates, the Enterprise WiFi Phone may

be propelled with great force and cause serious injury to occupants of the vehicle.

Potentially Explosive Atmospheres

(Explosive atmospheres refer to hazard classified locations that may contain

hazardous gas, vapors, or dusts.)

Turn off your Enterprise WiFi Phone prior to entering any area with a potentially

explosive atmosphere. Do not remove, install, or charge batteries in such areas. Sparks

in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily

injury or even death.

The areas with potentially explosive atmospheres referred to above include fuelling

areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas

where the air contains chemicals or particles, such as grain, dust or metal powders.

Areas with potentially explosive atmospheres are often but not always posted.

Blasting Caps and Blasting Areas

To avoid possible interference with blasting operations, turn off your Enterprise WiFi

Phone when you are near electrical blasting caps, in a blasting area, or in areas posted:

"Turn off radio". Obey all signs and instructions.

Power Supply

Use ONLY a LISTED Motorola, Type no. PWRS-14000 (5Vdc, 850mA), direct plug-in

power supply, marked Class 2 or LPS (IEC60950-1, SELV). Use of alternative Power

Supply will invalidate any approvals given to this unit and may be dangerous.

Batteries

All batteries can cause property damage and/or bodily injury such as burns if a

conductive material such as jewelry, keys, or beaded chains touch exposed terminals.

The conductive material may complete an electrical circuit (short circuit) and become

quite hot. Exercise care in handling any charged battery, particularly when placing it

inside a pocket, purse, or other container with metal objects.

Taiwan - Recycling

EPA (Environmental Protection Administration) requires dry

battery producing or importing firms in accordance with Article 15

of the Waste Disposal Act are required to indicate the recycling

marks on the batteries used in sales, giveaway or promotion.

Contact a qualified Taiwanese recycler for proper battery

disposal.

Battery Information

Use only Motorola approved batteries. Accessories which have battery charging

capability are approved for use with the following battery models:

Motorola BK10 (3.7 Vdc, 1750 mAh) for EWP3200 and BK10 (3.7 Vdc, 1750 mAh) and

BK90 (3.7 Vdc, 1480 mAh) for EWP2200.

Motorola rechargeable battery packs are designed and constructed to the highest

standards within the industry.

However, there are limitations to how long a battery can operate or be stored before

needing replacement. Many factors affect the actual life cycle of a battery pack, such as

heat, cold, harsh environmental conditions and severe drops.

When batteries are stored over six (6) months, some irreversible deterioration in overall

battery quality may occur. Store batteries at half of full charge in a dry, cool place,

removed from the equipment to prevent loss of capacity, rusting of metallic parts and

electrolyte leakage. When storing batteries for one year or longer, the charge level

should be verified at least once a year and charged to half of full charge.

Replace the battery when a significant loss of run time is detected.

Standard warranty period for all Motorola batteries is Three (3) months, regardless if the

battery was purchased separately or included as part of the mobile computer or bar

code scanner. For more information on Motorola batteries, please visit:

http://www.mysymbolcare.symbol.com/battery/batbasics1.html

Battery Safety Guidelines

•

The area in which the units are charged should be clear of debris and combustible

materials or chemicals. Particular care should be taken where the device is charged

in a non commercial environment.

•

Follow battery usage, storage, and charging guidelines found in the user's guide.

•

Improper battery use may result in a fire, explosion, or other hazard.

•

To charge the mobile device battery, the battery and charger temperatures must be

between +32ºF and +104ºF (0ºC and +40ºC)

•

Do not use incompatible batteries and chargers. Use of an incompatible battery or

charger may present a risk of fire, explosion, leakage, or other hazard. If you have

any questions about the compatibility of a battery or a charger, contact Motorola

Enterprise Mobility support.

•

For devices that utilize a USB port as a charging source, the device shall only be

connected to products that bear the USB-IF logo or have completed the USB-IF

compliance program.

•

Do not disassemble or open, crush, bend or deform, puncture, or shred.

•

Severe impact from dropping any battery-operated device on a hard surface could

cause the battery to overheat.

•

Do not short circuit a battery or allow metallic or conductive objects to contact the

battery terminals.

•

Do not modify or remanufacture, attempt to insert foreign objects into the battery,

immerse or expose to water or other liquids, or expose to fire, explosion, or other

hazard.

•

Do not leave or store the equipment in or near areas that might get very hot, such as

in a parked vehicle or near a radiator or other heat source. Do not place battery into

a microwave, oven or dryer.

•

Battery usage by children should be supervised.

•

Please follow local regulations to promptly dispose of used re-chargeable batteries.

•

Do not dispose of batteries in fire.

•

Seek medical advice immediately if a battery has been swallowed.

•

In the event of a battery leak, do not allow the liquid to come in contact with the skin

or eyes. If contact has been made, wash the affected area with large amounts of

water and seek medical advice.

•

If you suspect damage to your equipment or battery, contact Motorola Enterprise

Mobility support to arrange for inspection.

Radio Frequency Interference Requirements-FCC

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna

•

Increase the separation between the equipment and receiver

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

•

Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

For RLAN Devices:

The use of 5 GHz RLAN’s, for use in Canada, have the following restrictions:

•

Restricted Band 5.60 – 5.65 GHz

This device complies with RSS 210 of Industry Canada.

Operation is subject to the following two conditions: (1) this device may not cause

harmful interference and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux

appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions

suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce

dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de

provoquer un fonctionnement indésirable.

Label Marking: The Term “IC:” before the radio certification only signifies that Industry

Canada technical specifications were met.

The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:

•

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -

2.4835 GHz

•

France, outside usage is restricted to 2.4 - 2.454 GHz.

•

Italy requires a user license for outside usage.

Bluetooth® Wireless Technology for use through the EEA has the following restrictions:

•

Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -

2.4835 GHz

•

France, outside usage is restricted to 10mW EIRP

•

Italy requires a user license for outside usage.

Motorola hereby, declares that this device is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of

Conformity may be obtained from:

www.motorola.com/enterprisemobility/doc.

Korea Warning Statement for Class B ITE

Other Countries

Australia

Use of 5GHz RLAN's in Australia is restricted in the following band 5.50 - 5.65GHz.

Brazil

Declarações Regulamentares para EWP2200 e EWP3200

Nota: "A marca de certificação se aplica ao Transceptor, modelo EWP2200 e

EWP3200. Este equipamento opera em caráter secundário, isto é, não tem direito a

proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não

pode causar interferência a sistemas operando em caráter primário."

Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br

CHILE

Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de

telecomunicaciones, relativa a radiaciones electromagnéticas.

Mexico

Restrict Frequency Range to: 2.450 - 2.4835 GHz.

S. Korea

해당 무선설비는 운용 중 전파혼신 가능성이 있음

해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 .

Taiwan

Waste Electrical and Electronic

Equipment (WEEE)

English: For EU Customers: All products at the end of their life must be returned to Motorola for recycling. For

information on how to return product, please go to: