Motorola Solutions 89FT7630 Outdoor Fixed Wireless LAN Device User Manual CanopyR8UserGuideIss2DraftReg
Motorola Solutions, Inc. Outdoor Fixed Wireless LAN Device CanopyR8UserGuideIss2DraftReg
Exhibit D Users Manual per 2 1033 b3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 981543 |
| Application ID | WH+5h4AtAigwmIZs6BVb1w== |
| Document Description | Exhibit D Users Manual per 2 1033 b3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 31.56kB (394539 bits) |
| Date Submitted | 2008-08-06 00:00:00 |
| Date Available | 2008-08-06 00:00:00 |
| Creation Date | 2008-07-14 07:59:28 |
| Producing Software | Mac OS X 10.5.3 Quartz PDFContext |
| Document Lastmod | 2008-07-14 08:07:21 |
| Document Title | CanopyR8UserGuideIss2DraftReg |
| Document Creator | Microsoft Word |
| Document Author: | John Harris |
Overview of Canopy Networks 6.2 Release 8 SORTED MODEL (PART) NUMBERS The various model/part numbers of Canopy products are categorically listed in Table 22. Range Table 22: Canopy model numbers (part numbers) for AES and DES encryption modules Integrated Antenna Canopy DES Advantage AES 900 MHz 2.4 GHz 5.1 GHz 9000AP 9000APF 9001AP 9001APF 9000SM 9000SMF 9001SM 9001SMF 2450AP 2450APWL 2451AP 2451APWL 2400SM 2400SMWL 2460SM 2400SMLP 2401SM 2401SMWL 2450SM 2450SMWL 2451SM 2451SMWL 2400BH 2400BH20 2400BHRF 2400BHRF20 2400BHWL 2400BHWL20 2400BHWLRF 2400BHWLRF20 DES Advantage AES DES AES 9000APC 9000SMC 9001APC 9001SMC 5450APC 5450SMC 5451APC 5451SMC 2401BH 2401BH20 2401BHRF 2401BHRF20 2401BHWL 2401BHWL20 2401BHWLRF 2401BHWLRF20 5202AP 5202SM 5252AP 5252SM 5202BH 5212BH20 5212BHRF20 5200SM 5260SM 5200SMHZ 5400AP 5.4 GHz OFDM AES 2401AP 2401APWL 5200BH 5210BHRF 5210BHRF20 5.4 GHz FSK DES Canopy 2400AP 2400APWL 5200AP 5200APHZ 5.2 GHz Connectorized for Antenna 5400SM 5460SM 5400BH 5400BH20 5400BHRF 5400BHRF20 5440AP 5201AP 5201SM 5201BH 5211BH20 5211BHRF 5211BHRF20 5401AP 5401SM 5401BH 5401BH20 5401BHRF 5401BHRF20 5250AP 5250APHZ 5251AP 5251SM 5250SM 5250SMHZ 5450AP 5450SM 5451AP 5451SM 5400APC 5400SMC 5401APC 5401SMC 5400BHC 5400BHC20 5401BHC 5401BHC20 5440APC 5440SM 80 Draft for Regulatory Review Issue 2, July 2008 Range Release 8 5.7 GHz 5.7 GHz “G” Series Overview of Canopy Networks Integrated Antenna Canopy Connectorized for Antenna Advantage DES AES DES 5700AP 5700APHZ 5701AP 5701SM 5750AP 5750APHZ 5700SM 5760SM 5700SMMHZ 5701BH 5701BH20 5701BHRF 5701BHRF20 5750SM 5750SMHZ 5701APG 5701SMG 5750APG 5750APHZG 5701BHG 5701BH20G 5750SMG 5750SMHZG 5700BH 5700BH20 5700BHRF 5700BHRF20 5700APG 5700APHZG 5703APG 5700SMG 5760SMG 5700SMHZG 5703SMG Canopy Advantage AES DES AES 5751AP 5751SM 5700APC 5700SMC 5701APC 5701SMC 5700BHC 5700BHC20 5701BHC 5701BHC20 5751APG 5700APC 5751SMG 5700SMCG 5700BHCG 5700BHC20G 5701BHCG 5701BHC20G DES 5750APC 5750SMC 5751APC 5751SMC 5701APCG 5750APCG 5751APCG 5701SMCG 5750SMCG 5751SMCG 5700BHG 5700BH20G 5.9 GHz 5900APBB 5900SMBB 6.3 5950APBB 5950SMBB INTERPRETING ELECTRONIC SERIAL NUMBER (ESN) Canopy module labels contain a product serial number that could be significant in your dealings with Motorola or your supply chain. This is the electronic serial number (ESN), also known as the Media Access Control (MAC) address, of the module. This hexadecimal number identifies the module in 6.4 ◦ communications between modules. ◦ the data that modules store about each other (for example, in the Registered To field). ◦ the data that the BAM software applies to manage authentication and bandwidth. ◦ Prizm auto discovery of SMs through the AP (or BHS through the BHM). ◦ software upgrades performed by the Canopy Network Updater Tool (CNUT). ◦ information that CNUT passes to external tools. FINDING THE MODEL (PART) NUMBER AND ESN The labels and locations of Canopy module model (part) numbers and ESNs are shown in Table 23. Table 23: Labels and locations of model (part) numbers and ESNs Numeric String Issue 2, July 2008 Label and Location Older Modules Newer Modules Draft for Regulatory Review AES 81 Release 8 Installation and Configuration Guide 15 AVOIDING HAZARDS Use simple precautions to protect staff and equipment. Hazards include exposure to RF waves, lightning strikes, and power surges. This section specifically recommends actions to abate these hazards. 15.1 PREVENTING OVEREXPOSURE TO RF ENERGY To protect from overexposure to RF energy, install Canopy radios so as to provide and maintain the minimum separation distances from all persons shown in Table 39. Table 39: Exposure separation distances Module Type Minimum Separation Distance from Persons Canopy module, FSK or OFDM 20 cm (approx 8 in) Canopy module with Reflector Dish 1.5 m (approx 60 in or 5 ft) Canopy Module with LENS 0.5 m (approx 20 in) Antenna of connectorized 5.7 GHz AP 30 cm (approx 12 in) Antenna of connectorized or integrated 900 MHz module 60 cm (24 in) Indoor 900 MHz SM 10 cm (4 in) At these and greater separation distances, the power density from the RF field is below generally accepted limits for the general population. NOTE: These are conservative distances that include compliance margins. In the case of the reflector, the distance is even more conservative because the equation used models the reflector as a point source and ignores its physical dimensions. 15.1.1 Details of Calculations for Separation Distances and Power Compliance Margins Limits and guidelines for RF exposure come from: ◦ US FCC limits for the general population. See the FCC web site at http://www.fcc.gov, and the policies, guidelines, and requirements in Part 1 of Title 47 of the Code of Federal Regulations, as well as the guidelines and suggestions for evaluating compliance in FCC OET Bulletin 65. ◦ Health Canada limits for the general population. See the Health Canada web site at http://www.hc-sc.gc.ca/rpb and Safety Code 6. ◦ ICNIRP (International Commission on Non-Ionizing Radiation Protection) guidelines for the general public. See the ICNIRP web site at http://www.icnirp.de/ and Guidelines for Limiting Exposure to Time-Varying Electric, Magnetic, and Electromagnetic Fields. Issue 2, July 2008 Draft for Regulatory Review 169 Installation and Configuration Guide Release 8 The applicable power density exposure limits from the documents referenced above are ◦ 6 W/m for RF energy in the 900-MHz frequency band in the US and Canada. ◦ 10 W/m for RF energy in the 2.4-, 5.2-, 5.4-, and 5.7-GHz frequency bands. Peak power density in the far field of a radio frequency point source is calculated as follows: P•G S= 4 πd where S = power density in W/m P = RMS transmit power capability of the radio, in W G = total Tx gain as a factor, converted from dB d = distance from point source, in m Rearranging terms to solve for distance yields d= pS Calculated Distances and Power Compliance Margins Table 40 shows calculated minimum separation distances d, recommended distances and resulting power compliance margins for each frequency band and antenna combination. Table 40: Calculated distances and power compliance margins Band Range 900 MHz 2.4 GHz 5.2 GHz 170 Variable (calculated) external 0.4 W (26 dBm) 10.0 (10 dB) 6 W/m integrated 0.25 W (24 dBm) 15.8 (12 dB) 6 W/m indoor, integrated Simulation model used to estimate Specific Absorption Rate (SAR) levels 10 cm (4 in) integrated 0.34 W (25 dBm) 6.3 (8 dB) 10 W/m 13 cm 20 cm (8 in) 2.3 integrated plus reflector 0.34 W (25 dBm) 79.4 (19 dB) 10 W/m 46 cm 1.5 m (5 ft) 10 integrated 0.2 W (23 dBm) 5.0 (7 dB) 10 W/m 9 cm 20 cm (8 in) integrated plus reflector 0.0032 W (5 dBm) 316 (25 dB) 10 W/m 9 cm 1.5 m (5 ft) 279 integrated 0.025 W 40 10 9 cm 50 cm 31 Antenna Draft for Regulatory Review Recommended Separation Distance Power Compliance Margin 23 cm 60 cm (24 in) 23 cm 60 cm (24 in) Issue 2, July 2008 Release 8 Band Range 5.4 GHz 5.4 GHz OFDM 5.7 GHz 5.7 GHz “G” Series 5.9 GHz Installation and Configuration Guide Variable (calculated) plus LENS (14 dBm) (16 dB) W/m integrated 0.2 W (23 dBm) 5.0 (7 dB) 10 W/m 9 cm 20 cm (8 in) integrated plus reflector 0.0032 W (5 dBm) 316 (25 dB) 10 W/m 9 cm 1.5 m (5 ft) 279 integrated plus LENS 0.020 W (13 dBm) 50 (17 dB) 10 W/m 9 cm 50 cm (12 in) 31 integrated 0.01 W (10 dBm) 50 (17 dB) 10 W/m 6 cm 20 cm (8 in) 10 integrated 0.2 W (23 dBm) 5.0 (7 dB) 10 W/m 9 cm 20 cm (8 in) integrated plus reflector 0.2 W (23 dBm) 316 (25 dB) 10 W/m 71 cm 1.5 m (5 ft) 4.5 Integrated plus LENS 0.2 W (23 dBm) 50 (17 dB) 10 W/m 28 cm 50 cm (12 in) 3.13 integrated 0.4 W (26 dBm) 5.0 (7 dB) 10 W/m 13 cm 20 cm (8 in) 2.5 integrated plus reflector 0.4 W (26 dBm) 316 (25 dB) 10 W/m 100 cm 1.5 m (5 ft) 2.24 integrated plus LENS 0.4 W (26 dBm) 50 (17 dB) 10 W/m 40 cm 50 cm (12 in) 1.57 enhanced 0.4 W (26 dBm) 10 (10 dB) 10 W/m 18 cm 20 cm (8 in) 1.26 integrated 0.2 W (23 dBm) 5.0 (7 dB) 10 W/m 9 cm 20 cm (8 in) Antenna Recommended Separation Distance Power Compliance Margin (12 in) 15.2 GROUNDING CANOPY EQUIPMENT Effective lightning protection diverts lightning current safely to ground, Protective Earth (PE) . It neither attracts nor prevents lightning strikes. WARNING! Lightning damage is not covered under the Canopy warranty. The recommendations in Canopy guides give the installer the knowledge to protect the installation from the harmful effects of ESD and lightning. These recommendation must be thoroughly and correctly performed. However, complete protection is neither implied or possible. Issue 2, July 2008 Draft for Regulatory Review 171 Release 8 Reference Information 36 LEGAL AND REGULATORY NOTICES 36.1 IMPORTANT NOTE ON MODIFICATIONS Intentional or unintentional changes or modifications to the equipment must not be made unless under the express consent of the party responsible for compliance. Any such modifications could void the user’s authority to operate the equipment and will void the manufacturer’s warranty. 36.2 NATIONAL AND REGIONAL REGULATORY NOTICES 36.2.1 U.S. Federal Communication Commission (FCC) Notification This device complies with Part 15 of the US FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the US FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference by one or more of the following measures: ◦ Increase the separation between the affected equipment and the unit; ◦ Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to; ◦ Consult the dealer and/or experienced radio/TV technician for help. FCC IDs and the specific configurations covered are listed in Table 70. Table 70: US FCC IDs and Industry Canada Certification Numbers and Covered Configurations FCC ID Industry Canada Cert Number Frequencies ABZ89FC5809 109W-9000 8 MHz channels, centered on 906-924 MHz in 1 MHz increments (within the 902-928 MHz ISM band) Module Families 900 SM, AP 900 Indoor SM Issue 2, July 2008 Draft for Regulatory Review Antenna, Lens, or Reflector Maximum Allowed Transmitter Output Power 12 dBi Canopy integrated antenna 24 dBm (250 mW) 10 dBi Maxrad Model # Z1681, flat panel 26 dBm (400 mW) 10 dBi Mars Model # MA-IS91T2, flat panel 26 dBm (400 mW) 10 dBi MTI Model #MT-2630003/N, flat panel 26 dBm (400 mW) 8 dBi integrated adj pol antenna 26 dBm (400 mW) 487 Reference Information Release 8 FCC ID Industry Canada Cert Number Frequencies ABZ89FC5808 109W-2400 20 MHz channels, centered on 24152457.5 MHz in 2.5 MHz increments (within the 24002483.5 MHz ISM band) ABZ89FC3789 ABZ89FC5807 ABZ89FT7623 none ABZ89FC5804 109W-5200 109W-5210 none 109W-5400 109W-5700 20 MHz channels, centered on 52755325 MHz in 5 MHz increments (within the 5250-5350 MHz U-NII band) 20 MHz channels, centered on 52755325 MHz in 5 MHz increments (within the 5250-5350 MHz U-NII band) 20 MHz channels, centered on 54955705 MHz in 5 MHz increments (within the 5470-5725 MHz U-NII band) 20 MHz channels, centered on 54955575 and 5675-5705 MHz in 5 MHz increments (within the 5470-5725 MHz U-NII band with 5600-5650 MHz excluded) 20 MHz channels, centered on 57355840 MHz in 5 MHz increments (within the 5725-5850 MHz ISM band) Module Families Maximum Allowed Transmitter Output Power 8 dBi internal 28 dBm (630 mW) 2400 BH, SM 8 dBi internal + 11 dB reflector 25 dBm (340 mW) 5200 BH, SM, AP 7 dBi internal 23 dBm (200 mW) 5200 BH SM, AP, only P10 Modules 7 dBi internal + 18 dB reflector 5 dBm (3.2 mW) 7 dBi internal + 9 dB lens 14 dBm (25 mW) 7 dBi internal + 18 dB reflector 5 dBm (3.2 mW) 7 dBi internal 23 dBm (200 mW) 7 dBi internal + 18 dB reflector 5 dBm (3.2 mW) 7 dBi internal + 9 dB lens 14 dBm (25 mW) 7 dBi internal 23 dBm (200 mW) 7 dBi internal + 18 dB reflector 5 dBm (3.2 mW) 7 dBi internal + 9 dB lens 14 dBm (25 mW) 7 dBi internal 23 dBm (200 mW) 7 dBi internal + 18 dB reflector 23 dBm (200 mW) 7 dBi internal + 10 dB lens 23 dBm (200 mW) 7 dBi internal + 10 dB lens 19 dBm (80 mW) 2400 BH, SM, AP 5210 BH 5400 BH, SM, AP 5400 BH, SM, AP 5700 BH, SM, AP 5700 BH, SM 5700 AP 488 Antenna, Lens, or Reflector Draft for Regulatory Review Issue 2, July 2008 Release 8 Reference Information FCC ID Industry Canada Cert Number Frequencies ABZ89FT7630 109W5700G 20 MHz channels, centered on 57355840 MHz in 5 MHz increments (within the 5725-5850 MHz ISM band) Module Families 5700 BHG, SMG, APG 26 dBm (400 mW) 7 dBi internal + 18 dB reflector 26 dBm (400 mW) 7 dBi internal + 10 dB lens 26 dBm (400 mW) 7 dBi internal + 10 dB lens 19 dBm (80 mW) Mars Model # MAWC50-5X vertically polarized antenna with 17 dBi gain 19 dBm (80 mW) 10 dBi internal 26 dBm (400 mW) 5440 AP 17 dBi connectorized antenna (60° x 5° 3 dB beam width) 10 dBm (10 mW) 5440 SM 17 dBi integrated antenna (18° x 18° 3 dB beam width) 10 dBm (10 mW) 5700 BHG, SMG 5700 APCG 5703 SMG, APG 36.2.2 none 10 MHz channels, centered on 54765719 in 0.5 MHz increments (within the 5470-5725 MHz U-NII band) Maximum Allowed Transmitter Output Power 7 dBi internal 5700 APG ABZ89FT7629 Antenna, Lens, or Reflector Industry Canada (IC) Notification This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Users should be cautioned to take note that in Canada high power radars are allocated as primary users (meaning they have priority) of 5250 – 5350 MHz and 5650 – 5850 MHz and these radars could cause interference and/or damage to license-exempt local area networks (LELAN). This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to RSS-210 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference by one or more of the following measures: Issue 2, July 2008 Draft for Regulatory Review 489 Reference Information Release 8 ◦ Increase the separation between the affected equipment and the unit; ◦ Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to; ◦ Consult the dealer and/or experienced radio/TV technician for help. To reduce potential radio interference to other users, the antenna type and its gain should be chosen so its Equivalent Isotropic Radiated Power (EIRP) is not more than that permitted for successful communication. Industry Canada Certification Numbers and the specific configurations covered are listed in Table 70. This device has been designed to operate with the antennas listed in Table 70 and having a maximum gain as shown in Table 70. Antennas not included or having a gain greater than as shown in Table 70 are strictly prohibited from use with this device. Required antenna impedance is 50 ohms. 36.2.3 Regulatory Requirements for CEPT Member States (http://www.cept.org) When operated in accordance with the instructions for use, Motorola Canopy Wireless equipment operating in the 2.4 and 5.4 GHz bands is compliant with CEPT Recommendation 70-03 Annex 3 for Wideband Data Transmission and HIPERLANs. For compliant operation in the 2.4 GHz band, the transmit power (EIRP) from the built-in patch antenna and any associated reflector dish shall be no more than 100mW (20dBm). For compliant operation in the 5.4 GHz band, the transmit power (EIRP) from the built-in patch antenna and any associated reflector dish shall be no more than 1 W (30 dBm). The following countries have completely implemented CEPT Recommendation 70-03 Annex 3A (2.4 GHz band): ◦ EU & EFTA countries: Austria, Belgium, Denmark, Spain, Finland, Germany, Greece, Iceland, Italy, Ireland, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Switzerland, Sweden, UK ◦ New EU member states: Czech Republic, Cyprus, Estonia, Hungary, Lithuania, Latvia, Malta, Poland, Slovenia, Slovakia ◦ Other non-EU & EFTA countries: Bulgaria, Bosnia and Herzegovina, Turkey The following countries have a limited implementation of CEPT Recommendation 70-03 Annex 3A: ◦ ◦ 490 France - Outdoor operation at 100mW is only permitted in the frequency band 2400 to 2454 MHz; − Any outdoor operation in the band 2454 to 2483.5MHz shall not exceed 10mW (10dBm); − Indoor operation at 100mW (20dBm) is permitted across the band 2400 to 2483.5 MHz French Overseas Territories: − Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte – 100mW indoor & outdoor is allowed − Réunion and Guyana – 100mW indoor, no operation outdoor in the band 2400 to 2420MHz ◦ Italy - If used outside own premises, general authorization required ◦ Luxembourg - General authorization required for public service Draft for Regulatory Review Issue 2, July 2008
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 9 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:cb9f04ba-51a5-11dd-8f33-001124ce2936 Modify Date : 2008:07:14 08:07:21-05:00 Create Date : 2008:07:14 07:59:28-05:00 Metadata Date : 2008:07:14 08:07:21-05:00 Document ID : uuid:b16935da-51a4-11dd-8f33-001124ce2936 Format : application/pdf Title : CanopyR8UserGuideIss2DraftReg Creator : Microsoft Word Author : John Harris Subject : Producer : Mac OS X 10.5.3 Quartz PDFContextEXIF Metadata provided by EXIF.tools