Motorola Solutions 89FT7633 3630SM Outdoor Subscriber Module User Manual CSM 320 User Guide Issue 1 Reg Draft 4
Motorola Solutions, Inc. 3630SM Outdoor Subscriber Module CSM 320 User Guide Issue 1 Reg Draft 4
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1195150 |
| Application ID | 1EYgCpIv18PCSfZIgAmZeg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 57.27kB (715882 bits) |
| Date Submitted | 2009-11-06 00:00:00 |
| Date Available | 2009-11-30 00:00:00 |
| Creation Date | 2009-10-15 14:12:33 |
| Producing Software | PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)] |
| Document Lastmod | 2009-11-06 16:32:52 |
| Document Title | CSM 320 User Guide Issue 1 Reg Draft 4 |
| Document Creator | Microsoft Word |
| Document Author: | John Harris |
CSM User Guide Issue 1 October 2009 DRAFT 4 for REGULATORY REVIEW Notices See important regulatory, legal, and safety notices in section 6 on page 16. Trademarks, Product Names, and Service Names MOTOROLA, the stylized M Logo, and all other trademarks indicated as such herein are registered trademarks of Motorola, Inc. ® Reg. US Pat & Tm. Office. All other product or service names are the property of their respective owners. © 2009 Motorola, Inc. All rights reserved http://motorola.wirelessbroadbandsupport. DRAFT 4 for REGULATORY REVIEW CSM 320 User Guide Using This User Guide The audience for this document includes network planners, system operators, network administrators, and equipment installers. 1.1 FINDING THE INFORMATION YOU NEED 1.1.1 Becoming Familiar with This User Guide The Table of Contents provides not only a sequential index of topics but also a visual glance at the organization of topics in this guide. A few minutes spent with the Table of Contents in either the paper or the electronic version of this guide can save much more time in finding information now and in the future. The List of Procedures may be especially useful in the paper version of this guide, particularly where you mark those procedures that you wish to frequently see. In contrast, the List of Figures and List of Tables are most useful for automated searches on key words in the electronic version of this guide. If a match is present, the match is the first instance that the search finds. Quick Reference This user guide comprises six sections, as described in Table 1. Table 1: User guide organization scheme Section Purpose Guide to This User Guide (this section) Identifies Product Description Planning ◦ ◦ products covered by this user guide. products covered by their own separate user guides. ◦ how this user guide is organized. ◦ ◦ where to find module web pages and parameter descriptions. what the various typefaces and admonitions indicate. ◦ how to contact Motorola. Provides ◦ references to RF and networking theory. ◦ ◦ overviews and comparisons of products and how they communicate. descriptions of data handling and synchronization. ◦ ◦ a review of optional features. resources for developing familiarity and proficiencies with networks. Provides essential information for ◦ evaluating an area for a network. ◦ Configuration Issue 1, October 2009 specifying the IP addresses and frequencies to use. Provides guidance for ◦ expanding network coverage. ◦ ◦ improving the security of wireless links. distributing bandwidth resources ◦ monitoring and changing variables through SNMP. DRAFT 4 for REGULATORY REVIEW Page 3 CSM 320 User Guide Section Purpose Installation Provides systematic approaches for Reference Information ◦ avoiding hazards from RF and natural causes. ◦ testing, storing, and deploying equipment. Provides supplemental information such as Glossary ◦ authorizations, approvals, and notices. ◦ ◦ a bibliography of adjunctive information sources. a history of changes in documentation. Defines terms and concepts that are used in this user guide. 1.1.2 Searching This User Guide To search this document and the software release notes of supported releases, look in the Table ® of Contents for the topic and in the Adobe Reader search capability for keywords that apply. These searches are most effective when you begin the search from the cover page because the first matches may be in titles of sections, figures, tables, or procedures. 1.1.3 Finding Parameter and Field Definitions for Module Web Pages Because this user guide is sequentially arranged to support tasks, and various tasks require different settings and readings, parameter and field definitions are scattered according to the tasks that they support. 1.2 NEW PRODUCTS AND FEATURES DESCRIBED IN THIS ISSUE This section is a placeholder where other new descriptions, as wells as clarifications and corrections, will be listed in future issues. 1.3 NEW DESCRIPTIONS AND REVISIONS IN THIS ISSUE This section is a placeholder where other new descriptions, as wells as clarifications and corrections, will be listed in future issues. 1.4 PORTFOLIO OF WIRELESS BROADBAND SOLUTIONS The Motorola portfolio of wireless broadband solutions provides a range of flexible, interworkable products ◦ Fixed − licensed 802.16e point-to-multipoint solutions (PMP 320) − unlicensed point-to-multipoint solutions (PMP 100, PMP 400) − Expedience licensed point-to-multipoint solutions − point-to-point solutions, including ◦ PTP 100 and PTP 200 Series bridges ◦ PTP 500, and PTP 600 Series bridges Reader is a registered trademark of Adobe Systems, Incorporated. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 4 CSM 320 User Guide ◦ Indoor − 1.5 Enterprise Wireless LAN (WLAN) solutions ◦ Mesh, including the MOTOMESH series of products ◦ Wireless Manager, a network manager capable of managing many of these elements ◦ WiMAX, including infrastructure, CPE and devices, services, and IP core PRODUCTS COVERED BY THIS USER GUIDE This user guide describes planning, configuration, installation, and operation of the CSM 320. The CSM 320 is 802.16e-based, WiMAX-compatible Customer Premise Equipment (CPE). One use of the CSM 320 is in a PMP 320 Access Network. 1.6 PRODUCTS NOT COVERED BY THIS USER GUIDE Related PMP 320 Access Network devices have their own user guides: CAP 320, the Cluster Management Module 4 (CMM4), Network Updater Tool (CNUT), and Wireless Manager (WM). 1.7 GUIDE TO INTERPRETING TYPEFACE AND OTHER CONVENTIONS This document employs distinctive fonts to indicate the type of information, as described in Table 2. Table 2: Font types Font Type of Information variable width bold Selectable option in a graphical user interface or settable parameter in the web-based interface to a component. constant width regular Literal system response in a command-line interface. constant width italic Variable system response in a command-line interface. constant width bold Literal user input in a command-line interface. constant width bold italic Variable user input in a command-line interface. This document employs specific imperative terminology as follows: ◦ Type means press the following characters. ◦ Enter means type the following characters and then press Enter. This document also employs a set of consistently used admonitions. Each of these types of admonitions has a general purpose that underlies the specific information in the box. These purposes are indicated in Table 3. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 5 CSM 320 User Guide Table 3: Admonition types Admonition Label General Message NOTE: informative content that may ◦ defy common or cursory logic. ◦ ◦ describe a peculiarity of the implementation. add a conditional caveat. ◦ provide a reference. ◦ explain the reason for a preceding statement or provide prerequisite background for what immediately follows. RECOMMENDATION: suggestion for an easier, quicker, or safer action or practice. IMPORTANT! informative content that may ◦ ◦ identify an indication that you should watch for. advise that your action can disturb something that you may not want disturbed. ◦ reiterate something that you presumably know but should always remember. CAUTION! a notice that the risk of harm to equipment or service exists. WARNING! a notice that the risk of harm to person exists. 1.8 TECHNICAL SUPPORT Here is the escalation path for resolution of a problem: 1. Check this user guide 2. Consider checking the Community Forum and Knowledge Base at http://motorola.wirelessbroadbandsupport.com/support/community. 3. Escalate the problem to your supplier or reseller. 4. Escalate the problem to Canopy Technical Support or other designated Tier 3 technical support: U.S. and Canada Issue 1, October 2009 Email: technical-support@canopywireless.com DRAFT 4 for REGULATORY REVIEW Page 6 CSM 320 User Guide 1-866-961-9288 Latin and Central America Email: technical-support@canopywireless.com Argentina 0800-666-2789 Brazil 0800-891-4360 Columbia 01-800-912-0557 Mexico 001-800-942-7721 Peru 0800-70-086 All other countries +420 533 336 946 Europe, Middle East, and Africa Email: essc@motorola.com Denmark 043682114 France 0157323434 Germany 06950070204 Italy 0291483230 Lithuania 880 030 828 Netherlands 0202061404 Norway 24159815 Portugal 0217616160 Spain 0912754787 Russia 810 800 228 41044 Saudi Arabia 800 844 5345 South Africa 0800981900 United Kingdom 0203 0277499 Asia Pacific Email: WiBBsupport.apac@motorola.com +6048503854 (9am - 5pm Malaysia Time) +420 533 336 946 (outside hours) When you send e-mail or call, please include, as appropriate, software release on each module, IP addresses, MAC addresses, and features enabled. 1.9 FEEDBACK ON DOCUMENTATION Is this document accurate, complete, and clear? How can it be improved? Send your feedback on documentation to technical-documentation@canopywireless.com. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 7 CSM 320 User Guide 2 Product Description A PMP 320 Access Network provides a low cost point-to-multipoint broadband infrastructure optimized for fixed outdoor applications and offers simple installation for rapid deployment. A PMP 320 network consists of CAP 320 – the Access Point, usually tower-mounted in a four-sector configuration. CMM4 Cluster Management Module – a zero-footprint enclosure housing a GPS module connected to a GPS antenna, sync- and power-injection circuitry, surge protection, and a managed switch. The CMM is used to provide custom “sync over power over Ethernet” to the APs as well as offering a networked, managed switch. CSM 320 – a Subscriber Module, Customer Premise Equipment (CPE), usually mounted on a residence or other structure, and powered by a Power Adapter providing standard 802.3af power over Ethernet. 600SS Surge Suppressor – used to provide protection from over-voltages and over-currents such as induced by near lightning events. A properlygrounded 600SS should be installed on each Ethernet cable on the outside of any building or structure at the point of entry. A properly-grounded 600SS should also be installed within a meter of each AP. In addition, a PMP 320 network usually also requires a AAA Server – Authentication, Authorization, and Accounting server DHCP Server – Dynamic Host Configuration Protocol server DNS Server – Domain Name System server NMS – a Network or Element Management System, such the Motorola Wireless Manager Motorola offers PMP 320 equipment that operates in the spectrum ranges as shown in Table 4. Table 4: Mapping Frequencies, System Names, Product Names, and Product Model Numbers Licensed Spectrum Ranges System Name AP Name SM Name 3.3 to 3.4 GHz PMP 33320 CAP 33320 CSM 33320 3.4 to 3.6 GHz PMP 35320 CAP 35320 CSM 35320 3.6 to 3.8 GHz PMP 36320 CAP 36320 CSM 36320 AP Model Number SM Model Number Frequencies Supported 3530APC 3530SM 3.3 to 3.6 GHz 3630APC 3630SM 3.6 to 3.8 GHz Detailed specifications for the various products are available on-line at xxx. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 8 CSM 320 User Guide 3 Planning To be developed Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 9 CSM 320 User Guide 4 Configuration Key parameters to configure in the SM include Center channel frequency and channel size WAN and LAN side IP addresses Transmitter power is not configurable at the SM, as the AP performs auto transmit power control on the SM. IMPORTANT! It is the responsibility of the operator and professional installer to ensure the system is operating within the frequencies covered by their license and that the Transmitter Output Power is set within regulatory limits for their country. These must be set or confirmed on initial configuration and after a module is reset to factory defaults. Key default values for accessing an SM are shown in Table 5. 10.1.1.254 admin admin Procedure 1 Table 5: Default IP address, username, and password LAN-side Management IP address Username 10.1.1.254 admin Password admin Procedure 1: Configuring key parameters on the SM 1. On the Wireless Network > Scanner tab of the SM’s GUI, configure desired channels to be scanned. See Figure 1 for an example of the Wireless Network > Scanner tab activated for editing. 2. On the Networking > Bridge/NAT Mode tab, configure the SM to either obtain its WAN-side IP address by DHCP, or configure a Static IP address. See Figure 2 for an example of the Networking > Bridge/NAT Mode tab. 3. On the Networking > Bridge/NAT Mode tab, configure the LAN IP address, or leave at the default of 10.1.1.254. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 10 CSM 320 User Guide Figure 1: Example of Wireless Network > Scanner tab Figure 2: Example of Networking > Bridge/NAT Mode Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 11 CSM 320 User Guide 5 Installation WARNING! Installing a unit usually involves height, electricity, and exposure to RF (Radio Frequency) energy. To avoid personal injury, follow applicable national and local safety regulations along with industry best practices. Also follow the specific guidelines in this document, including maintaining a sustained exposure separation distance of 50 cm (~20 in) as described in section 6.3 on page 19. 5.1 INSTALLING THE SM Procedure 2: Installing the SM 1. While on the ground, before climbing, identify the location for the 600SS surge suppressor. Select a location on the outside of the subscriber premises at the point where the Ethernet cable will penetrate the residence or building, and as close to an existing or planned grounding system (Protective Earth) as possible. 2. Using all safety precautions, climb to the roof or use a lift and select the best location for SM mounting, dependent on ◦ knowledge of the geographical area ◦ location of towers and APs ◦ the roof type and mounting options ◦ experimentation with a powered SM The SM must be mounted so as to avoid accidental touch. Typically this means mounting it at least 4 m (~13 ft) above ground level. 3. Select the type of mounting hardware appropriate for the chosen location. 4. Attach the mounting bracket and radio to the structure. 5. Size a length of Cat-5 Ethernet cable for the run from the SM to the location identified for the SS surge suppressor. 6. Slip the gland and ring on the Ethernet cable. NOTE: The gland and ring must be put on the cable before the cable is terminated with an RJ-45 connector. An RJ-45 connector will not fit through the gland and ring. 7. Terminate the Ethernet cable with an RJ-45 connector 8. Connect the Ethernet cable to the SM. Include a splicing loop (extra cable to allow future repositioning or reconnectorization) and position and secure the Ethernet cable with UV-resistant wire ties or other locally-approved f fasteners so it forms a drip loop (so water drips off the cable instead of following the cable to the radio). Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 12 CSM 320 User Guide 9. Size a length of green-with-yellow-stripe copper ground wire to run from the SM to the exisiting or planned grounding system. The ground wire must be a minimum of 18 AWG, with 14 AWG recommended for runs up to 45 m (~150 ft) and 10 AWG recommended for runs over 45 m (~150 ft) . 10. Loosen the SM grounding screw, wrap the ground wire around the ground post, and tighten the grounding screw. Figure 3: SM grounding per NEC specifications 11. Remove the cover of the 600SS surge suppressor. Use, at minimum, a D-suffixed surge suppressor (600SSD or greater).With the cable openings facing downward, mount the 600SS to the outside of the subscriber premises at the point where the Ethernet cable penetrates the residence or building, and as close to the grounding system (Protective Earth) as possible. 12. Wrap an AWG 10 (6mm ) green-with-yellow-stripe copper ground wire around the ground post of the 600SS. 13. Tighten the ground post locking nut. 14. Ensure the pin 4 selector in the 600SS is set to the factory default of “isolated”, not “grounded”. 15. If not using an existing approved grounding system, install a grounding system (Protective Earth) according to applicable regulations or codes. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 13 CSM 320 User Guide 16. Securely connect the two green-with-yellow-stripe ground wires (one from the 600SS surge suppressor and one from the SM) to the existing or newly installed grounding system (Protective Earth). 17. Using diagonal cutters or long nose pliers, remove the knockouts that cover the cable openings to the 600SS surge suppressor. 18. Pack both of the 600SS surge suppressor Ethernet jacks with dielectric grease. 19. Include a splicing loop in the Ethernet cable from the radio (extra cable to allow future repositioning or reconnectorization) and position and secure the Ethernet cable with UV-resistant wire ties or other locally-approved fasteners so it forms a drip loop (so water drips off the cable instead of following the cable into the 600SS surge suppressor). 20. Terminate the Ethernet cable with an RJ-45 connector. 21. Connect this Ethernet cable to either one of the Ethernet jacks (they are nondirectional). 22. Terminate another Ethernet cable with an RJ-45 connector. 23. Connect this other Ethernet cable to the other Ethernet jack of the 600SS surge suppressor. 24. Feed the Ethernet cable through a portal, hole, or other accepted entry point to the inside of the building and to the 802.3af power adapter. 25. Terminate the inside end of the Ethernet cable with an RJ-45 connector and connect to the 802.3af power adapter. 26. Replace the cover of the 600SS surge suppressor. 27. Connect the power supply to a power source. 28. Aim the SM using values from the Physical Status field of the Status > Wireless Status tab. See Figure 4 for an example of the Status > Wireless Status tab. 29. Tighten all fasteners on the SM mount. 30. Secure the Ethernet cable with appropriate UV-resistant fasteners using accepted industry or local practices for method of attachment and distance between fasteners. 31. Seal the cable entry point into the building using accepted industry or local practices. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 14 CSM 320 User Guide Figure 4: Example of Status > Wireless Status tab Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 15 CSM 320 User Guide 6 Regulatory, Legal, and Safety Notices 6.1 IMPORTANT NOTE ON MODIFICATIONS Intentional or unintentional changes or modifications to the equipment must not be made unless under the express consent of the party responsible for compliance. Any such modifications could void the user’s authority to operate the equipment and will void the manufacturer’s warranty. 6.2 NATIONAL AND REGIONAL REGULATORY NOTICES 6.2.1 U.S. Federal Communication Commission (FCC) Notification This device complies with Part 15 of the US FCC Rules and Regulations. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the US FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference by one or more of the following measures: Increase the separation between the affected equipment and the unit; Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to; Consult the dealer and/or experienced radio/TV technician for help. FCCtransmitter IDs and the specific configurations covered listed inwith Table This must not be co-located or operating in are conjunction any6. other antenna or transmitter. Table 6: US FCC IDs and covered configurations FCC ID ABZ89FT7633 6.2.2 Operating Freq 3.650 to 3.675 GHz Model Number 3630SM Antenna Gain 14.5 dBi Channel Size Maximum allowed EIRP Maximum Transmitter Output Power 10 MHz 10 W (40 dBm) 25.5 dBm 7 MHz 7 W (38.5 dBm) 24 dBm 5 MHz 5 W (37 dBm) 22.5 dBm 3.5 MHz 3.5 W (35.4 dBm) 20.9 dBm Industry Canada Notification Operation is subject to the following two conditions: 1. This device may not cause harmful interference and Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 16 CSM 320 User Guide 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference by one or more of the following measures: ◦ Increase the separation between the affected equipment and the unit; ◦ Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to; ◦ Consult the dealer and/or experienced radio/TV technician for help. To reduce potential radio interference to other users, the antenna type and its gain should be chosen so its Equivalent Isotropic Radiated Power (EIRP) is not more than that permitted for successful communication. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Certification Numbers and the specific configuration covered are listed in Table 7. Table 7: Industry Canada Certification Numbers and covered configurations Industry Canada Cert Number 109W-3530SM Operating Freq Model Number 3.450 to 3.600 GHz 3530SM Antenna Gain Maximum Transmitter Output Power 14.5 dBi 109W-3630SM 6.2.3 3.600 to 3.650 GHz 27 dBm (500 mW) 3630SM European Union Notification The relevant Declaration of Conformity can be found at http://motorola.wirelessbroadbandsupport.com/doc.php. 6.2.4 Equipment Disposal Waste (Disposal) of Electronic and Electric Equipment Please do not dispose of Electronic and Electric Equipment or Electronic and Electric Accessories with your household waste. In some countries or regions, collection systems have been set up to handle waste of electrical and electronic equipment. In European Union countries, please contact your local equipment supplier representative or service center for information about the waste collection system in your country. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 17 CSM 320 6.2.5 User Guide EU Declaration of Conformity for RoHS Compliance Motorola hereby, declares that these Motorola products are in compliance with the essential requirements and other relevant provisions of Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances (RoHS) in electrical and electronic equipment. The relevant Declaration of Conformity can be found at http://motorola.wirelessbroadbandsupport.com/doc.php. 6.2.6 Labeling and Disclosure Table for China The People’s Republic of China requires that Motorola’s products comply with China Management Methods (CMM) environmental regulations. (China Management Methods refers to the regulation Management Methods for Controlling Pollution by Electronic Information Products.) Two items are used to demonstrate compliance - the label, and the disclosure table as shown in Table 8. [Need updated table for this product.] The label is placed in a customer visible position on the product. Logo 1 means that the product contains no substances in excess of the maximum concentration value for materials identified in the China Management Methods regulation. Logo 2 means that the product may contain substances in excess of the maximum concentration value for materials identified in the China Management Methods regulation, and has an Environmental Friendly Use Period (EFUP) in years, fifty years in the example shown. Logo 1 Logo 2 The Environmental Friendly Use Period (EFUP) is the period (in years) during which the Toxic and Hazardous Substances (T&HS) contained in the Electronic Information Product (EIP) will not leak or mutate causing environmental pollution or bodily injury from the use of the EIP. The EFUP indicated by the Logo 2 label applies to a product and all its parts. Certain field-replaceable parts, such as battery modules, can have a different EFUP and are marked separately. The Disclosure table is intended to communicate compliance with only China requirements; it is not intended to communicate compliance with EU RoHS or any other environmental requirements. Table 8: Disclosure table 有毒有害物质或元素 部件名称 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr6+) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 金属部件 × ○ × × ○ ○ 电路模块 × ○ × × ○ ○ 电缆及电缆组件 × ○ × × ○ ○ 塑料和聚合物部件 ○ ○ ○ ○ ○ × Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 18 CSM 320 User Guide ○： 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下。 ×： 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006 标准规定的限量要求。 6.3 RF EXPOSURE SEPARATION DISTANCES To protect from overexposure to RF energy, an SM must be installed to provide a separation distance of at least 50 cm ( ~20 in) from all persons and must not be collocated or operating with any other antenna or transmitter. The following section and Table 9 provide details and discussion on the separation distance calculations. 6.3.1 Details of Exposure Separation Distances Calculations and Power Compliance Margins Limits and guidelines for RF exposure come from: US FCC limits for the general population. See the FCC web site at http://www.fcc.gov, and the policies, guidelines, and requirements in Part 1 of Title 47 of the Code of Federal Regulations, as well as the guidelines and suggestions for evaluating compliance in FCC OET Bulletin 65. Health Canada limits for the general population. See the Health Canada web site at http://www.hc-sc.gc.ca/rpb and Safety Code 6. ICNIRP (International Commission on Non-Ionizing Radiation Protection) guidelines for the general public. See the ICNIRP web site at http://www.icnirp.de/ and Guidelines for Limiting Exposure to Time-Varying Electric, Magnetic, and Electromagnetic Fields. The applicable power density exposure limits from the documents referenced above is 10 W/m . Peak power density in the far field of a radio frequency point source is calculated as follows: P"G S= 4 # d2 where S = power density in W/m P = RMS transmit power capability of the radio, in W G = total Tx gain as a factor, converted from dB d = distance from point source, in m Rearranging terms to solve for distance yields d= P"G 4# S Table 9 shows calculated minimum separation distances d, recommended distances and the resulting power compliance margin. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 19 CSM 320 User Guide Table 9: Calculated exposure distances and power compliance margins Variable Band Unit 3.3 GHz to 3.8 GHz SM (calculated) 0.5 W (27 dBm) 28.2 (14.5 dB) 10 W/m 33 cm Recommended Separation Distance Power Compliance Margin 50 cm (~20 in) 2.23 The Recommended Separation Distance is chosen to give significant compliance margin in all cases. This is a conservative distance: It is along the beam direction (the direction of greatest energy). Exposure to the sides and back of the module is significantly less. It meets sustained exposure limits for the general population (not just shortterm occupational exposure limits), with some margin. The calculated compliance distance d is overestimated because the far-field equation models the antenna as a point source and neglects the physical dimension of the antenna. 6.4 LEGAL NOTICES 6.4.1 Software License Terms and Conditions ONLY OPEN THE PACKAGE, OR USE THE SOFTWARE AND RELATED PRODUCT IF YOU ACCEPT THE TERMS OF THIS LICENSE. BY BREAKING THE SEAL ON THIS DISK KIT / CDROM, OR IF YOU USE THE SOFTWARE OR RELATED PRODUCT, YOU ACCEPT THE TERMS OF THIS LICENSE AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS, DO NOT USE THE SOFTWARE OR RELATED PRODUCT; INSTEAD, RETURN THE SOFTWARE TO PLACE OF PURCHASE FOR A FULL REFUND. THE FOLLOWING AGREEMENT IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY), AND MOTOROLA, INC. (FOR ITSELF AND ITS LICENSORS). THE RIGHT TO USE THIS PRODUCT IS LICENSED ONLY ON THE CONDITION THAT YOU AGREE TO THE FOLLOWING TERMS. Now, therefore, in consideration of the promises and mutual obligations contained herein, and for other good and valuable consideration, the receipt and sufficiency of which are hereby mutually acknowledged, you and Motorola agree as follows: Grant of License. Subject to the following terms and conditions, Motorola, Inc., grants to you a personal, revocable, non-assignable, non-transferable, non-exclusive and limited license to use on a single piece of equipment only one copy of the software contained on this disk (which may have been pre-loaded on the equipment)(Software). You may make two copies of the Software, but only for backup, archival, or disaster recovery purposes. On any copy you make of the Software, you must reproduce and include the copyright and other proprietary rights notice contained on the copy we have furnished you of the Software. Ownership. Motorola (or its supplier) retains all title, ownership and intellectual property rights to the Software and any copies, including translations, compilations, derivative works (including images) partial copies and portions of updated works. The Software is Motorola’s (or its supplier's) confidential proprietary information. This Software License Agreement does not convey to you any interest in or to the Software, but only a limited right of use. You agree not to disclose it or make it available to anyone without Motorola’s written authorization. You will exercise no less than reasonable care to protect the Software from unauthorized disclosure. You agree not to disassemble, decompile or reverse engineer, or create derivative works of the Software, except and only to the extent that such activity is expressly permitted by applicable law. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 20 CSM 320 User Guide Termination. This License is effective until terminated. This License will terminate immediately without notice from Motorola or judicial resolution if you fail to comply with any provision of this License. Upon such termination you must destroy the Software, all accompanying written materials and all copies thereof, and the sections entitled Limited Warranty, Limitation of Remedies and Damages, and General will survive any termination. Limited Warranty. Motorola warrants for a period of ninety (90) days from Motorola’s or its customer’s shipment of the Software to you that (i) the disk(s) on which the Software is recorded will be free from defects in materials and workmanship under normal use and (ii) the Software, under normal use, will perform substantially in accordance with Motorola’s published specifications for that release level of the Software. The written materials are provided "AS IS" and without warranty of any kind. Motorola's entire liability and your sole and exclusive remedy for any breach of the foregoing limited warranty will be, at Motorola's option, replacement of the disk(s), provision of downloadable patch or replacement code, or refund of the unused portion of your bargained for contractual benefit up to the amount paid for this Software License. THIS LIMITED WARRANTY IS THE ONLY WARRANTY PROVIDED BY MOTOROLA, AND MOTOROLA AND ITS LICENSORS EXPRESSLY DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OF IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. MOTOROLA DOES NOT WARRANT THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERRORFREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN REPRESENTATIONS MADE BY MOTOROLA OR AN AGENT THEREOF SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. MOTOROLA DOES NOT WARRANT ANY SOFTWARE THAT HAS BEEN OPERATED IN EXCESS OF SPECIFICATIONS, DAMAGED, MISUSED, NEGLECTED, OR IMPROPERLY INSTALLED. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Limitation of Remedies and Damages. Regardless of whether any remedy set forth herein fails of its essential purpose, IN NO EVENT SHALL MOTOROLA OR ANY OF THE LICENSORS, DIRECTORS, OFFICERS, EMPLOYEES OR AFFILIATES OF THE FOREGOING BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL OR SIMILAR DAMAGES WHATSOEVER (including, without limitation, damages for loss of business profits, business interruption, loss of business information and the like), whether foreseeable or unforeseeable, arising out of the use or inability to use the Software or accompanying written materials, regardless of the basis of the claim and even if Motorola or a Motorola representative has been advised of the possibility of such damage. Motorola's liability to you for direct damages for any cause whatsoever, regardless of the basis of the form of the action, will be limited to the price paid for the Software that caused the damages. THIS LIMITATION WILL NOT APPLY IN CASE OF PERSONAL INJURY ONLY WHERE AND TO THE EXTENT THAT APPLICABLE LAW REQUIRES SUCH LIABILITY. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. Maintenance and Support. Motorola shall not be responsible for maintenance or support of the software. By accepting the license granted under this agreement, you agree that Motorola will be under no obligation to provide any support, maintenance or service in connection with the Software or any application developed by you. Any maintenance and support of the Related Product will be provided under the terms of the agreement for the Related Product. Transfer. In the case of software designed to operate on Motorola equipment, you may not transfer the Software to another party except: (1) if you are an end-user, when you are transferring the Software together with the Motorola equipment on which it operates; or 2) if you are a Motorola licensed distributor, when you are transferring the Software either together with such Motorola equipment or are transferring the Software as a licensed duly paid for upgrade, update, patch, new release, enhancement or replacement of a prior version of the Software. If you are a Motorola licensed distributor, when you are transferring the Software as permitted herein, you agree to transfer the Software with a license agreement having terms and conditions no less restrictive than those contained herein. You may transfer all other Software, not otherwise having an agreed restriction on transfer, to another party. However, all such transfers of Software are strictly subject to the conditions precedent that the other party agrees to accept the terms and conditions of this License, and you destroy any copy of the Software you do not transfer to that party. You may not sublicense or otherwise Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 21 CSM 320 User Guide transfer, rent or lease the Software without our written consent. You may not transfer the Software in violation of any laws, regulations, export controls or economic sanctions imposed by the US Government. Right to Audit. Motorola shall have the right to audit annually, upon reasonable advance notice and during normal business hours, your records and accounts to determine compliance with the terms of this Agreement. Export Controls. You specifically acknowledge that the software may be subject to United States and other country export control laws. You shall comply strictly with all requirements of all applicable export control laws and regulations with respect to all such software and materials. US Government Users. If you are a US Government user, then the Software is provided with "RESTRICTED RIGHTS" as set forth in subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights clause at FAR 52 227-19 or subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013, as applicable. Disputes. You and Motorola hereby agree that any dispute, controversy or claim, except for any dispute, controversy or claim involving intellectual property, prior to initiation of any formal legal process, will be submitted for non-binding mediation, prior to initiation of any formal legal process. Cost of mediation will be shared equally. Nothing in this Section will prevent either party from resorting to judicial proceedings, if (i) good faith efforts to resolve the dispute under these procedures have been unsuccessful, (ii) the dispute, claim or controversy involves intellectual property, or (iii) interim relief from a court is necessary to prevent serious and irreparable injury to that party or to others. General. Illinois law governs this license. The terms of this license are supplemental to any written agreement executed by both parties regarding this subject and the Software Motorola is to license you under it, and supersedes all previous oral or written communications between us regarding the subject except for such executed agreement. It may not be modified or waived except in writing and signed by an officer or other authorized representative of each party. If any provision is held invalid, all other provisions shall remain valid, unless such invalidity would frustrate the purpose of our agreement. The failure of either party to enforce any rights granted hereunder or to take action against the other party in the event of any breach hereunder shall not be deemed a waiver by that party as to subsequent enforcement of rights or subsequent action in the event of future breaches. 6.4.2 Hardware Warranty in US Motorola US offers a warranty covering a period of 1 year from the date of purchase by the customer. If a product is found defective during the warranty period, Motorola will repair or replace the product with the same or a similar model, which may be a reconditioned unit, without charge for parts or labor. 6.5 LIMIT OF LIABILITY IN NO EVENT SHALL MOTOROLA BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGE ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS, OR FROM ANY BREACH OF WARRANTY, EVEN IF MOTOROLA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. (Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.) IN NO CASE SHALL MOTOROLA’S LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT. Issue 1, October 2009 DRAFT 4 for REGULATORY REVIEW Page 22
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract, Print high-res XMP Toolkit : 3.1-701 Keywords : Producer : PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)] Create Date : 2009:10:15 14:12:33Z Creator Tool : Microsoft Word Metadata Date : 2009:11:06 16:32:52+08:00 Modify Date : 2009:11:06 16:32:52+08:00 Document ID : uuid:24f4f580-b995-11de-993f-001124ce2936 Instance ID : uuid:1af2f681-68a1-4da0-9b4f-5f897fead279 Format : application/pdf Title : CSM 320 User Guide Issue 1 Reg Draft 4 Creator : John Harris Description : Page Count : 22 Subject : Author : John Harris Apple Keywords :EXIF Metadata provided by EXIF.tools