Motorola Solutions 92FT4915 Mobile 2-Way Radio User Manual APX Mobile O2 Control Head

Motorola Solutions, Inc. Mobile 2-Way Radio APX Mobile O2 Control Head

UserManual.wiki >

Motorola Solutions >

92FT4915 User Manual >

Ex8b User Manual

APXTM TWO-WAY RADIOSAPX MOBILEO2 CONTROL HEADUSER GUIDE

EnglishSending an Emergency Call (Trunking Only)To exit emergency at any time, press and hold the Emergency button.Sending a Silent Emergency AlarmIf silent emergency alarm is used with emergency call, pressing the PTT button exits the silent mode and initiates the emergency call.Display Status Icons1Press Emergency button. 2A tone sounds and the display alternates Emergency and the home display.ORA short low-pitched tone sounds when the selected channel does not support emergency.3Press and hold the PTT button. Speak clearly into the microphone.4Release the PTT to end the transmission. 1Press the preprogrammed Emergency button to activate the silent alarm feature. 2The display does not change; the LED does not light up, and there is no tone.Receiving a call or data.Transmitting a call or data.Received an Individual Call.The more stripes, the stronger the signal strength for the current site (trunking only).utFVDirect radio-to-radio communication or communication through a repeater.On = DirectOff = RepeaterThis channel is being monitored.Voice muting the affiliated trunking talkgroup or selected channel.On = EnabledOff = DisabledL = Radio is set at Low power.H = Radio is set at High power.Scanning a scan list.Blinking dot = Detects activity on the Priority-One Channel during scan.Steady dot = Detects activity on the Priority-Two Channel during scan.The vote scan feature is enabled.OMKHOR .ijkOn = Secure operation.Off = Clear operation.Blinking = Receiving an encrypted voice call.On = AES Secure operation.Off = Clear operation.Blinking = Receiving an encrypted voice call.On = Location feature enabled, and location signal available.Off = Location feature disabled.Blinking = Location feature enabled, but location signal unavailable.Inverted = User is currently associated with the radio.On = Packet data is activated.Off = Packet data is deactivated.Blinking = Device registration or user registration with the server failed due to an invalid username or pin.Data activity is present.MFK is in Mode Change featureTurn the MFK to change channel.MFK is in Volume Change featureTurn the MFK to adjust the volume.mlGnoMenu Navigation< or > to Menu Entry (on the keypad mic.).g directly below Menu Entry to select.H to exit.U or D to scroll through sub-list.g directly below Menu Entry to select.

Declaration of ConformityEnglishiiNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.

Declaration of ConformityEnglishiiiAdditional FCC Notes to UsersThe following FCC information applies to Bluetooth radio optionsIC Model Name: PMHN4193ADescription: O2 Bluetooth Option BoardFCC ID: AZ492FT6002IC: 109U-92FT6002Conforms to the following regulations: FCC Part 15, Section 15.19, 15.12, and 15.105Note: Changes or modifications not expressly approved by Motorola may void the users authority, as authorized by the FCC, to operate this device and should not be made. See 47 CFR Part 15.21. Information to user.The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Part. 15.19(3).This device has been tested and found to comply with the limits of Part 15.15 of the FCC rules. Parties responsible for equipment compliance should note that the limits specified in this part will not prevent harmful interference under all circumstances.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. See Part 15.105b These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Declaration of ConformityEnglishivHowever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Industry Canada (IC) Statements:This Class B digital apparatus complies with ICES-003 and Radio Standards Specification (RSS) 210.

ContentsEnglishvContentsDeclaration of Conformity . . . . . . . . . . . . . . . . . .iImportant Safety Information. . . . . . . . . . . . . . .ixRF Energy Exposure and Product Safety Guide for Mobile Two-Way Radios Installed in Vehicles, Vessels or as Fixed Site Control Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . .ixSoftware Version . . . . . . . . . . . . . . . . . . . . . . . . xNotice to Users (FCC and Industry Canada) . . . . . . . xInformations importantes sur la sécurité . . . . . xGUIDE SUR L’EXPOSITION AUX RADIOFRÉQUENCES ET LA SÉCURITÉ DU PRODUIT POUR RADIOS MOBILES BIDIRECTIONNELLES. . . . . . . . . . . . . . . . . . . . . . . xVersion du logiciel . . . . . . . . . . . . . . . . . . . . . . .xiAvis aux utilisateurs (FCC et Industrie Canada) . . . .xiComputer Software Copyrights. . . . . . . . . . . . xiiDocumentation Copyrights. . . . . . . . . . . . . . . .xiiDisclaimer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiiGetting Started. . . . . . . . . . . . . . . . . . . . . . . . . . .1How to Use This User Guide . . . . . . . . . . . . . . . . . . . 1Notations Used in This Manual . . . . . . . . . . . . . . . . . 1Additional Performance Enhancement . . . . . . . . . . . 2Dynamic System Resilience (DSR) . . . . . . . . . . . . . 2CrossTalk Prevention . . . . . . . . . . . . . . . . . . . . . . . . 2Encrypted Integrated Data (EID) . . . . . . . . . . . . . . . 2SecureNet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2P25 Digital Vehicular Repeater System (DVRS) . . . 2What Your Dealer/System Administrator Can Tell You. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Preparing Your Radio for Use . . . . . . . . . . . . . .3Turning On the Radio. . . . . . . . . . . . . . . . . . . . . . . . . 4Validating Compatibility During Power Up . . . . . . . . 4Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . 5Identifying Radio Controls . . . . . . . . . . . . . . . . .5Radio Parts and Controls. . . . . . . . . . . . . . . . . . . . . . 6 O2 Control Head and Microphone . . . . . . . . . . . . . . 6

ContentsEnglishviProgrammable Features . . . . . . . . . . . . . . . . . . . . . . 7 One Touch Button . . . . . . . . . . . . . . . . . . . . . . . . . . 7Assignable Radio Functions . . . . . . . . . . . . . . . . . . . 7Assignable Settings or Utility Functions . . . . . . . . . . 9Accessing the Preprogrammed Functions . . . . . . . 10Using the Menu Select Buttons . . . . . . . . . . . . . . . . 10Using the Advance Programmable Buttons. . . . . . . 11Using the Navigation Buttons . . . . . . . . . . . . . . . . . 11Home Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Multi-function Knob. . . . . . . . . . . . . . . . . . . . . . . . . 12The MFK button on your radio is programmable to the following features : . . . . . . . . . . . . . . . . . . . . . . . . . 12Using the Keypad . . . . . . . . . . . . . . . . . . . . . 14Keypad Characters – Uppercase Mode . . . . . . . . . 14Keypad Characters – Lowercase Mode . . . . . . . . . 15Keypad Characters – Numeric Mode . . . . . . . . . . . 16Keypad Characters – Hexadecimal Mode . . . . . . . . 17Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . 18Identifying Status Indicators . . . . . . . . . . . . . .18Status Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Text Messaging Service (TMS) Icons . . . . . . . . . . . 21Status Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21TMS Menu Options . . . . . . . . . . . . . . . . . . . . . . 22Call Type Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Multi-function Knob - Concentric Ring LED . . . . . . 24Intelligent Lighting Indicators . . . . . . . . . . . . . . . 25Alert Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26General Radio Operation . . . . . . . . . . . . . . . . . 31Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Selecting a Radio Channel . . . . . . . . . . . . . . . . . . . 32Receiving and Responding to a Radio Call. . . . . . . 32Receiving and Responding to a Talkgroup Call . . . .33Receiving and Responding to a Private Call (Trunking Only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Receiving and Responding to a Telephone Call . . .34Making a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . 35Making a Talkgroup Call . . . . . . . . . . . . . . . . . . . . .35Making a Private Call (Trunking Only) . . . . . . . . . . .36Making a Telephone Call . . . . . . . . . . . . . . . . . . . . .37Repeater or Direct Operation . . . . . . . . . . . . . . . . . 37Monitoring Features . . . . . . . . . . . . . . . . . . . . . . . . 38Monitoring a Channel . . . . . . . . . . . . . . . . . . . . . . . .38Conventional Mode Operation . . . . . . . . . . . . . . . . .39

ContentsEnglishviiAdvanced Features. . . . . . . . . . . . . . . . . . . . . . 40Advanced Call Features. . . . . . . . . . . . . . . . . . . . . . 40Calling a Phone Not in the List. . . . . . . . . . . . . . . . .40Receiving and Making a Selective Call (Conventional Only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Receiving a Selective Call. . . . . . . . . . . . . . . . . . . .41Making a Selective Call. . . . . . . . . . . . . . . . . . . . . .41Using the Talkgroup Call Feature (Conventional Operation Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Selecting a Talkgroup . . . . . . . . . . . . . . . . . . . . . . .42Sending a Status Call. . . . . . . . . . . . . . . . . . . . . . . .43Using the Dynamic Regrouping Feature (Trunking Only)44Requesting a Reprogram . . . . . . . . . . . . . . . . . . . .44Classifying Regrouped Radios . . . . . . . . . . . . . . . .45Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Making a Private Call from Contacts . . . . . . . . . . . .46Adding a New Contact Entry . . . . . . . . . . . . . . . . . .47Deleting a Contact Entry . . . . . . . . . . . . . . . . . . . . .48Adding a Contact to a Call List or Phone List. . . . . .49Editing a Contact in a Call List or a Phone List . . . .49Editing an Entry Alias . . . . . . . . . . . . . . . . . . . . . . .49Editing as Entry ID . . . . . . . . . . . . . . . . . . . . . . . . .50Editing a Call Type . . . . . . . . . . . . . . . . . . . . . . . . .51Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Viewing a Scan List . . . . . . . . . . . . . . . . . . . . . . . . .51Editing the Scan List . . . . . . . . . . . . . . . . . . . . . . . . 52Changing the Scan List Status . . . . . . . . . . . . . . . . 52Viewing and Changing the Priority Status . . . . . . . 53Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Turning Scan On or Off. . . . . . . . . . . . . . . . . . . . . . 53Turning Scan On While Disregarding the Squelch Code (Conventional Channels Only) . . . . . . . . . . . . . . . . 54Transmitting While the Scan is On . . . . . . . . . . . . . 54Radio Programmed for Talkback Scan . . . . . . . . . 54Radio Programmed for Non-Talkback Scan . . . . . 55Deleting a Nuisance Channel . . . . . . . . . . . . . . . . . 55Restoring a Nuisance Channel . . . . . . . . . . . . . . . . 55Changing Priorities Status While Scan is On . . . . . 56Restoring Priorities in a Scan List. . . . . . . . . . . . . . 56Hang Up Box (HUB) . . . . . . . . . . . . . . . . . . . . . . . . 56 Call Alert Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Receiving a Call Alert Page . . . . . . . . . . . . . . . . . . 57Sending a Call Alert Page. . . . . . . . . . . . . . . . . . . . 58In-Call User Alert . . . . . . . . . . . . . . . . . . . . . . . . . . 59Emergency Operation . . . . . . . . . . . . . . . . . . . . . . . 59Sending an Emergency Alarm . . . . . . . . . . . . . . . . 60Sending an Emergency Call (Trunking Only) . . . . . 60Sending an Emergency Alarm with Emergency Call60Sending a Silent Emergency Alarm . . . . . . . . . . . . 61Special Considerations for Emergencies . . . . . . . . 62

ContentsEnglishviiiAutomatic Registration Service (ARS) . . . . . . . . . . 63Selecting or Changing ARS Mode. . . . . . . . . . . . . . 63Accessing the User Login Feature . . . . . . . . . . . . . 64Logging In as a User . . . . . . . . . . . . . . . . . . . . . . . 64 Logging Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Text Messaging Service (TMS) . . . . . . . . . . . . . . . . 66Accessing TMS Feature . . . . . . . . . . . . . . . . . . . . . 66Composing and Sending a New Text Message . . . 67Sending a Quick Text Message. . . . . . . . . . . . . . . . 68Using the Priority Status and Request Reply Features70Appending or Removing a Priority Status to a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Appending or Removing a Request Reply to a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Appending a Priority Status and a Reply Request to a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Removing a Priority Status and a Reply Request from a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Managing Text Messages . . . . . . . . . . . . . . . . . . . . 71Receiving a Text Message . . . . . . . . . . . . . . . . . . . 71Viewing a Text Message from the Inbox. . . . . . . . . 72Replying to a Received Text Message . . . . . . . . . . 73Accessing the Drafts Folder . . . . . . . . . . . . . . . . . . 74Managing Sent Text Messages . . . . . . . . . . . . . . . . 74Viewing a Sent Text Message . . . . . . . . . . . . . . . . 74Sending a Sent Text Message . . . . . . . . . . . . . . . . 75Deleting Text Messages . . . . . . . . . . . . . . . . . . . . .76Secure Operations . . . . . . . . . . . . . . . . . . . . . . . . . 76Managing Encryption . . . . . . . . . . . . . . . . . . . . . . . .76Loading a Single Encryption Key . . . . . . . . . . . . . .76Loading the Group Encryption Keys . . . . . . . . . . . .77Using the Multikey Feature . . . . . . . . . . . . . . . . . . .77Selecting an Encryption Key (Conventional Only). .78Enabling Secure Transmission . . . . . . . . . . . . . . . .78Accessing the Secure Feature . . . . . . . . . . . . . . . .79Selecting a Keyset. . . . . . . . . . . . . . . . . . . . . . . . . .79Erasing the Selected Encryption Keys . . . . . . . . . .79Requesting an Over-the-Air Rekey . . . . . . . . . . . . .80MDC Over-the-Air Rekeying (OTAR) Page. . . . . . .80Infinite UKEK Retention. . . . . . . . . . . . . . . . . . . . . .80Hear Clear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81The Global Positioning System (GPS) . . . . . . . . . . 81Understanding the GPS Feature . . . . . . . . . . . . . . .81Enhancing GPS Performance . . . . . . . . . . . . . . . . .82The Outdoor Location Feature (Using GPS) . . . . . .82Accessing the Outdoor Location Feature . . . . . . . .83Saving a Waypoint . . . . . . . . . . . . . . . . . . . . . . . . .84Viewing a Saved Waypoint . . . . . . . . . . . . . . . . . . .85Editing the Alias of a Waypoint . . . . . . . . . . . . . . . .86Editing the Coordinates of a Waypoint . . . . . . . . . .86Deleting a Single Saved Waypoint . . . . . . . . . . . . .87Deleting All Saved Waypoints . . . . . . . . . . . . . . . . .88Measuring the Distance and Bearing from a Saved

ContentsEnglishxTurning Off Rearmable External Alarms. . . . . . . . 106Using the Voice Announcement . . . . . . . . . . . . . . 107Helpful Tips . . . . . . . . . . . . . . . . . . . . . . . . . . .108Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .109Appendix: Maritime Radio Use in the VHF Frequency Range. . . . . . . . . . . . . . . . . . . . . . .110Special Channel Assignments. . . . . . . . . . . . . . . . 110Emergency Channel . . . . . . . . . . . . . . . . . . . . . . . 110Non-Commercial Call Channel . . . . . . . . . . . . . . . 111Operating Frequency Requirements . . . . . . . . . . . 111Declaration of Compliance for the Use of Distress and Safety Frequencies . . . . . . . . . . . . . . . . . . . . . . . 113Technical Parameters for Interfacing External Data Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Commercial Warranty and Service . . . . . . . .118

Important Safety InformationEnglishixImportant Safety InformationRF Energy Exposure and Product Safety Guide for Mobile Two-Way Radios Installed in Vehicles, Vessels or as Fixed Site Control StationsATTENTION! This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Mobile Two-Way Radios Installed in Vehicles, Vessels or as Fixed Site Control Station which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations.For a list of Motorola-approved antennas and other accessories, visit the following website: http://www.motorolasolutions.com/APXUnder Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.This radio transmitter has been approved by Industry Canada to operate with the Motorola-approved antenna types with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Note: Setting up the radio as an RF Modem takes complete control of the radio. In this mode, the radio no longer responds to button and PTT presses nor will it unmute to voice activity. This mode is designed to receive and pass specifically formatted over the air data to a tethered computer with RF modem enabled applications. This mode can only be exit by reprogramming the radio with Customer Programming Software (CPS) to not operate in RF modem mode and cycling power.

Software VersionEnglishxSoftware VersionAll the features described in the following sections are supported by the radio's software version R08.05.00 or later.Accessing Radio Information on page 101 to determine your radio's software version. Check with your dealer or system administrator for more details of all the features supported.Notice to Users (FCC and Industry Canada)This device complies with Part 15 of the FCC rules, Industry Canada license-exempt RSS standard(s) and RSS 210 of the Industry Canada rules per the conditions listed below:1This device may not cause harmful interference.2This device must accept any interference received, including interference that may cause undesired operation.3Changes or modifications made to this device, not expressly approved by Motorola, could void the user's authority to operate this equipment.Informations importantes sur la sécuritéGuide sur l’exposition aux radiofréquences et la sécurité du produit pour radios mobiles bidirectionnellesATTENTION! Cette radio est réservée à un usage professionnel seulement pour satisfaire les normes d'exposition à l'énergie RF de la FCC. Avant d'utiliser ce produit, lisez le guide inclus avec votre radio, qui contient d'importantes informations sur le mode d'emploi sécuritaire du produit ainsi que des informations relatives à l'énergie de RF et à son contrôle, afin d'assurer la conformité aux normes et règlements applicables.Pour obtenir une liste d'antennes et d'autres accessoires approuvés par Motorola, consultez le site Web : http://www.motorolasolutions.com/APX Avant d'utiliser ce produit, lisez les directives d'utilisation sécuritaire présentées dans le livret Sécurité du produit et exposition à l'énergie RF accompagnant votre radio.!Mise en garde

Version du logicielEnglishxiSelon la règlementation d'Industrie Canada, cet émetteur radio ne peut être utilisé qu'avec une antenne dont le type et le gain maximal (ou minimal) sont approuvés par Industrie Canada pour cet émetteur. Afin de limiter les interférences radio pour les autres utilisateurs, le type et le gain de l'antenne doivent être choisis de façon à ce que la puissance isotrope rayonnée équivalente (P.I.R.E.) ne soit pas plus forte qu'il ne le faut pour établir la communication.Le présent émetteur a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne agréés par Motorola et ayant un gain admissible maximal ainsi que l'impédance requise pour chaque type d'antenne indiqué. Les types d'antenne non inclus, dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.Remarque: Régler la radio en tant que modem RF prend le contrôle complet de la radio. Dans ce mode, la radio ne répond plus aux pressions des boutons de commande et PTT, et ne reçoit aucun signal vocal. Ce mode est conçu pour recevoir et transmettre des données spécifiquement formatées pour la liaison radio avec un ordinateur attaché doté d'applications compatibles avec le modem RF. Ce mode ne peut être désactivé qu'en reprogrammant la radio avec un logiciel CPS (programmation client) afin qu'elle ne fonctionne plus en mode modem RF et en la redémarrant.Version du logicielToutes les fonctionnalités décrites dans les sections suivantes sont prises en charge par la version du logiciel R08.05.00 ou ultérieure de la radio.Vérifiez auprès de votre détaillant ou de l'administrateur de système pour obtenir des renseignements sur les fonctionnalités prises en charge.Avis aux utilisateurs (FCC et Industrie Canada)Cet appareil est conforme à la Partie 15 des règlements de la FCC, normes CNR (cahiers des charges sur les normes radioélectriques) pour les appareils exempts de licence d’Industrie Canada et RSS 210 du règlement d'Industrie Canada selon les conditions énumérées ci-dessous:1Ce dispositif ne doit pas causer d'interférences nuisibles.2Cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent perturber le fonctionnement.

Computer Software CopyrightsEnglishxii3Les changements ou les modifications apportées à ce dispositif, non expressément approuvées par Motorola, peuvent annuler le droit de l'utilisateur à utiliser cet équipement.Computer Software CopyrightsThe Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product.Documentation CopyrightsNo duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola.DisclaimerThe information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others.

Getting StartedEnglish1Getting StartedTake a moment to review the following:How to Use This User Guide. . . . . . . . . . . . . . . . . . . . . page 1Notations Used in This Manual . . . . . . . . . . . . . . . . . . . page 1Additional Performance Enhancement . . . . . . . . . . . . . page 2What Your Dealer/System Administrator Can Tell You . page 3How to Use This User GuideThis User Guide covers the basic operation of the APX™ Mobile Radios.However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information.Notations Used in This ManualThroughout the text in this publication, you will notice the use of WARNING, Caution, and Note. These notations are used to emphasize that safety hazards exist, and the care that must be taken or observed.The following special notations identify certain items:An operational procedure, practice, or condition, etc., which may result in injury or death if not carefully observed.An operational procedure, practice, or condition, etc., which may result in damage to the equipment if not carefully observed.Note: An operational procedure, practice, or condition, etc., which is essential to emphasize.!W A R N I N G!!

Getting StartedEnglish2Additional Performance EnhancementThe following are some of the latest creations designed to enhance the security, quality and efficiency of APX mobile radios.Dynamic System Resilience (DSR)DSR ensures the radio system is seamlessly switched to a backup master site dynamically in case of system failure. DSR also provides additional indication e.g. failure detection, fault recovery, and redundancy within the system to address to the user in need. Mechanisms related to the Integrated Voice and Data (IV & D) or data centric are all supported by DSR.CrossTalk PreventionThis feature prevents crosstalk scenario from happening, especially when a wideband antenna is used. This feature allows the adjustment of the Trident Transmitting SSI clock rate in the radio to be varied from the Receiving Frequency. This subsequently reduced the possibilities of radio frequency interfering spurs and prevents the issues of crosstalk. Encrypted Integrated Data (EID) EID provides security encryption and authentication of IV & D data bearer service communication between the radio and the Customer Enterprise Network.SecureNetSecureNet allows user to perform secured communications on an Analog or Motorola Data Communication (MDC) channel. The MDC OTAR feature will allow users to perform OTAR activities on an MDC channel.P25 Digital Vehicular Repeater System (DVRS)Motorola Solutions offers an MSI Certified APX compatible, 3rd Party, P25 Digital Vehicular Repeater System (DVRS) that provides low cost portable radio coverage in areas where only mobile radio coverage is available and portable radio coverage is either intermittent or non-existent.Example DescriptionHome button or HButtons and keys are shown in bold print or as an icon.PHONE Menu entries are shown similar to the way they appear on the radio’s display.>This means “Press the right side of the 4-way Navigation button.” (Using keypad mic)

Preparing Your Radio for UseEnglish3What Your Dealer/System Administrator Can Tell YouYou can consult your dealer or system administrator about the following:•Is your radio preprogrammed with any preset conventional channels?•Which buttons have been programmed to access other features? •What optional accessories may suit your needs?Preparing Your Radio for UseTurning On the Radio. . . . . . . . . . . . . . . . . . . . . . . . . . page 4 Validating Compatibility During Power Up. . . . . . . . . .page 4Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . .page 5

Preparing Your Radio for UseEnglish4Turning On the RadioPress the Power Button briefly turn on the radio. After a short time, the red, yellow and green LEDs light up. The display then shows Zone and channel text, and menu items display on the screen. The backlight will turn on to the last selected dim level. Note: Pressing the Power Button before the LED lights up will be ignored.If Fail ##/## appears in the display, the radio will not function until the condition has been corrected.If Error ##/## appears, some non-critical data has been changed. If either of these displays appear, if the display goes blank, or if the unit appears to be locked up, see Helpful Tips on page 108 for more information.If the power-up test is unsuccessful, you see Error XX/YY (XX/YY is an alphanumeric code). Turn off the radio, check the battery, and turn the radio back on. If the radio fails the power-up test again, record the Error XX/YY code and contact your dealer. If CH Mismatch appears, means that either the Control Head has been connected to an incompatible transceiver, or vice versa.If your radio does not power up, contact your dealer. To turn off the radio, press the Power Button after the LEDs light up.Validating Compatibility During Power UpThe radio validates and updates the software and hardware of your control head(s) during power up. Follow the procedure below when your radio runs this task. Procedure:1The display shows Maintenance mode remote device; promptly followed by other maintenance statuses. 2The display shows Update done please reset upon completion.ORThe display shows Update failed please reset when it fails to update. 3Press the Power Button to reset. The radio runs the usual power up operation if the software updates are complete.ORPower ButtonLEDs

Identifying Radio ControlsEnglish5The radio runs the Maintenance Mode if the updates are not complete and repeat step 1.Note: If Sw incomplete appears, use Flashport Recovery Tool to update the control heads before you power on the radio again.Adjusting the VolumeTo increase the volume, rotate the Multi-Function Knob (MFK) clockwise. To decrease the volume, rotate the MFK counterclockwise.The display shows volume bars and volume level when you change the volume.Identifying Radio ControlsTake a moment to review the following:Radio Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . .page 6O2 Control Head and Microphone . . . . . . . . . . . . . . .page 6Programmable Features . . . . . . . . . . . . . . . . . . . . . . . .page 7Assignable Radio Functions. . . . . . . . . . . . . . . . . . . .page 7Assignable Settings or Utility Functions . . . . . . . . . . .page 9Accessing the Preprogrammed Functions . . . . . . . . . .page 10Using the Menu Select Buttons . . . . . . . . . . . . . . . .page 10Using the Advance Programmable Buttons . . . . . . . page 11Using the Navigation Buttons . . . . . . . . . . . . . . . . . . page 11Using the Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 14Keypad Characters – Uppercase Mode . . . . . . . . . .page 14Keypad Characters – Lowercase Mode . . . . . . . . . .page 15Keypad Characters – Numeric Mode . . . . . . . . . . . .page 16Keypad Characters – Hexadecimal Mode . . . . . . . .page 17Push-To-Talk (PTT) Button. . . . . . . . . . . . . . . . . . . . . .page 18Multi-Function Knob

Identifying Radio ControlsEnglish6Radio Parts and Controls O2 Control Head and Microphone Note: The microphone is not part of a radio. It is an optional accessory. Power ButtonLED IndicatorsEmergency Button*Push-to-Talk (PTT) Button Accy No-Dot Button (Purple)*Accy 2-Dot Button*Multi-function Knob (MFK)*Home ButtonMenu Select Buttons*Accessory Port (Microphone)*These controls/buttons are programmable.Accy 1-Dot Button*Dimmer ButtonUp & Down Buttons*** Your radio’s hardware is Bluetooth ready. Check with your dealer or system administrator for more details of all the features supportedBluetooth Indicator**Home Button (Microphone)Data Feature Button*Okay/Select Button ()Cancel Button ()Navigation Button (Microphone)Keypad *This button is programmable.

Identifying Radio ControlsEnglish7Programmable Features Any reference in this manual to a control that is “preprogrammed” means that the control must be programmed by a dealer or a qualified radio technician using the radio’s programming software, in order to assign a feature to that control.The programmable buttons can be programmed as shortcuts to radio functions or preset channels/groups depending on the duration of a button press:•Press – Pressing and releasing rapidly.•Long press – Pressing and holding for the programmed duration (between 0.25 seconds and 3.75 seconds).•Hold down – Keeping the button pressed. One Touch ButtonEach of the four Menu Select buttons, the Emergency button and the three Accy buttons on the microphone are programmable buttons which can be preprogrammed by a qualified radio technician to a default function which is activated upon a short press. Assignable Radio FunctionsAuxiliary – Switches back and forth between two radios that are attached to the same control head. Call Alert – Allows the radio to function like a pager, or to verify if a radio is active on the system.Call Response – Allows you to answer a private call or phone call.Channel – Selects a channel.Contacts – Selects the Contacts menu.Delete – Deletes digit, or deletes a nuisance channel in Scan. Digital Vehicle Repeater System – Toggles between the Digital Vehicle Repeater System (VRS) mode.Dynamic Priority (Conventional Only) – Allows any channel in a scan list (except for the Priority-One channel) to temporarily replace the Priority-Two channel.Emergency – Depending on the programming, initiates or cancels an emergency alarm or call.Information – Displays the basic radio information, IP-related information, and buttons or switches control mapping.Intercom – Enables users of multiple control heads to talk to each other via the control heads in a multi-control head setup.Internet Protocol Address – Displays the Internet Protocol (IP) address, device name, and status of the radio.Location – Determines the current location (latitude, longitude, time and date), and also the distance and bearing to another 

Identifying Radio ControlsEnglish8location. Or, turns the GPS functionality on or off for all locations.Message – Enters the current message list.Monitor (Conventional Only) – Monitors a selected channel for all radio traffic until function is disabled.Multiple Private Line (Conventional Only) – Selects the Multiple Private Line lists.Nuisance Delete – Temporarily removes an unwanted channel, except for priority channels or the designated transmit channel, from the scan list. The designated transmit channel refers to the user’s selected zone/channel combination from which scan is initiated. One Touch 1 – 4 – Launches a specific feature with one single button-press. You can setup as much as four separately programmed buttons for four different features.Phone – Allows you to make and receive calls similar to standard phone calls.Private Line Defeat (Conventional Only) – Overrides any coded squelch (DPL or PL) that is preprogrammed to a channel.Private Call (Trunking Only) – Allows a call from an individual radio to another individual radio.Radio Profiles – Allows for easy access to a set of preprogrammed visual and audio settings of the radio.Ext PA On/Off – Toggles the audio routing between the connected public address (PA) loudspeaker amplifier and the radio’s internal public address (PA) system.Recent Calls – Allows for easy access to the list of calls recently received or made.Rekey Request – Notifies the dispatcher that you require a new encryption key.Repeater Access Button (RAB) (Conventional Only) – Allows to manually send a repeater access codeword. Reprogram Request (Trunking Only) – Notifies the dispatcher that you want a new dynamic regrouping assignment.Request-To-Talk (Conventional Only) – Notifies the dispatcher that you want to send a voice call.Scan – Toggles scan on or off. Scan List Programming – Selects the scan list for editing.Secure/Clear – Toggles secure transmission on or off.Select – Selects the assigned list for editing.Selective Call (Conventional Only) – Calls an assigned radio.Site Display (Trunking Only) – Views the current site or enable a site search for SmartZone operation.Site Lock/Unlock (Trunking Only) – Toggles between lock and unlock mode when using the SmartZone option.

Identifying Radio ControlsEnglish9Site Search (Trunking Only) – Performs site search for AMSS (Automatic Multiple Site Select) or SmartZone operation.Status – Sends data calls to the dispatcher about a predefined status.Talkaround/Direct (Conventional Only) – Toggles between using a repeater and communicating directly with another radio.Talkgroup (Conventional Only) – Allows a call from an individual radio to a group of radios.Text Messaging Service (TMS) – Selects the text messaging menu.TMS Quick Text – Selects a predefined message. User Login – Automatically registers with the server.Zone Down – Toggles downward through the zones in the radio.Zone Select – Allows selection from a list of zones.Zone Up – Toggles upward through the zones in the radio.Assignable Settings or Utility FunctionsAir Horn – Toggles the external airhorn alert tone on or off.All Tones/Alerts – Toggles all tones on or off.Dimmer – Changes the display brightness.External Radio – Toggles external radio on or off.Front/Rear – Switches one of two control heads to be active at one time.HiLo – Toggles the Hilo Airhorn tones on or off.Backlight – Toggles display backlight on or off.Horns/Lights – Toggles horns and lights feature on or off.Keypad Mute – Toggles the keypad tones on or off.Keypad Lock – Locks the radio’s keypad, or even locks in the radio’s currently operating channel when the Mode Knob scrolls to other channels.Low Power – Toggles transmit power level between high and low.Manual – Toggles the manual tone on or off.Public Address On/Off – Toggles the radio’s internal public address (PA) system on or off.Siren – Toggles external siren alert tone on or off. 

Identifying Radio ControlsEnglish10Squelch – Toggles squelch level between normal open and tight. TX Power Level – Toggles transmit power level between high and low.Voice Announcement – Audibly indicates the current feature mode, Zone or Channel the user has just assigned. Voice Mute – Toggles voice mute on or off for the channels which have enabled In-Call User Alert. When Voice Mute is active, the radio remains muted to all conventional dispatch calls and affiliated trunking group calls.Volume Set Tone – Adjusts the volume of the speakers, or adjusts the volume of the radio’s alert tones.Wail – Toggles the external wail alert tone on or off.Yelp – Toggles the external yelp alert tone on or off.Accessing the Preprogrammed Functions You can access various radio functions through one of the following ways:•A short or long press of the relevant programmable buttons.OR•Use the Menu Select Button (g).Using the Menu Select ButtonsThe Menu Select Buttons allow you to access the menu entries of features. Note: Check with your dealer or system administrator for the list of features activated in your radio.Your radio may be preprogrammed differently from the following example, but the steps for selecting a zone may appear as shown below: •Press the Menu Select button (g) directly below Zone. 

Identifying Radio ControlsEnglish11Using the Advance Programmable ButtonsThis feature is to help you to shorten the process of applying certain common features. *These programmable buttons support the One Touch Button feature. (Quick Access) One Touch Button – Enters a menu with a short press on the preprogrammed One Touch button. Features assigned to these buttons are Call, Call Alert, Phone, Repeater Access, MDC RTT Button Access, Status and Message. Using the Navigation ButtonsYour radio is equipped with navigation buttons. The navigation buttons will allow you to access the features in the radio.Up and Down ButtonsBy default, the U and D buttons are used as up and down arrow input. These buttons are programmable. They can be programmed to navigate through zones, channels and to increase and decrease the volume of the radio.Right and Left ButtonsThe > and < buttons mentioned throughout the manual can be found on the keypad microphone (keypad mic.). These buttons will allow you to navigate the lists in the radio.Accy No-Dot Button (Purple)*Accy 1-Dot Button*Accy 2-Dot Button*Menu Select Buttons*Emergency Button*Up & Down Buttons

Identifying Radio ControlsEnglish12Home Button The H button returns you to the home (default) display. In most cases, this is the current mode. For selected radio features, the H button is also used to save user-edited radio settings or information before returning you to the Home screen.Note: Some features do not require you to press H to go to the Home screen. Refer to the individual feature sections in this manual for further details on saving user-edited radio settings or information.The H button also can revert to home channel from any other zone and mode in the radio. Check with your dealer or system administrator for more information.Dimmer Button Use this button to adjust the brightness of the display. Long press to toggle between day and night mode. Multi-function Knob The MFK button on your radio is programmable to the following features :Mode Change - Press the MFK once and turn clockwise to scroll the channel list.Volume Change -Turn the MFK clockwise or counterclockwise to adjust the volume level of the speaker. The volume level can be adjusted in 16 steps or 32 steps. A fast turn of the MFK adjusts the volume level in 16 steps with large increments in volume level. A slow turn of the MFK adjusts the volume level in 32 steps with small increments in volume level. The display shows the volume level and bars to indicate the current level. The level of last selected volume when your radio powers down remains the same when the radio powers up.The main display shows the icon of the secondary feature.The main display does not show the icon of primary feature.Your radio by default is set to use the primary feature. Short press the MFK to toggle it to work on either the secondary or primary feature.The concentric ring LED on the MFK will blink in green when the knob is set to secondary feature.

Identifying Radio ControlsEnglish13The secondary feature has an inactivity timer. This timer starts when the secondary feature is idle. The radio returns to primary feature when the timer expires.If the MFK is set to operate only one feature, it is recommended that it be set to Volume Change.Consult your dealer or system administrator for the best option available for MFK.Concentric Ring LED

$Identifying Radio ControlsEnglish14Using the Keypad You can use the 3 x 4 alphanumeric keypad on the keypad microphone to access your radio’s features. The keypad functions in a manner similar to a standard telephone keypad when entering numeric digits. When the keypad is used to edit a list, each key can generate different characters of the alphabet. The tables below show the number of times a key needs to be pressed to generate the required character.Keypad Characters – Uppercase ModeNumber of Times Key is PressedKey12345678910111213141516171819202111. ,?! ;@_-*#&$/+=\“ ‘ ()2ABC3DEF4GH I5JKL6MNO7PQRS8TUV9WX Y Z0Toggle between mixed case mode, uppercase mode, and lowercase mode.*Space#Toggle between numeric and letter mode.$

$Identifying Radio ControlsEnglish15Keypad Characters – Lowercase ModeNumber of Times Key is PressedKey12345678910111213141516171819202111. ,?! ;@_-*#&$/+=\“ ‘ ()2abc3de f4gh i5jkl6mn o7pqr s8tuv9wxyz0Toggle between mixed case mode, uppercase mode, and lowercase mode.*Space#Toggle between numeric and letter mode. $

$Identifying Radio ControlsEnglish16Keypad Characters – Numeric Mode Number of Times Key is PressedKey12345678910111213141516171819202111. ,?! ;@_-*#&$/+=\“ ‘ ()22334455667788990 0*Space#Toggle between numeric and letter mode.$