Motorola Solutions 92FT7118 Mobile 2-Way Radio with WiFi User Manual APX TWO WAY RADIOS

Motorola Solutions, Inc. Mobile 2-Way Radio with WiFi APX TWO WAY RADIOS

Users Guide

Download: Motorola Solutions 92FT7118 Mobile 2-Way Radio with WiFi User Manual APX TWO WAY RADIOS
Mirror Download [FCC.gov]Motorola Solutions 92FT7118 Mobile 2-Way Radio with WiFi User Manual APX TWO WAY RADIOS
Document ID3957955
Application IDubSq6iottZrvOFKFdPAEfw==
Document DescriptionUsers Guide
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize213.19kB (2664846 bits)
Date Submitted2018-08-09 00:00:00
Date Available2018-08-15 00:00:00
Creation Date2016-09-05 21:41:14
Producing SoftwareAntenna House PDF Output Library 6.1.420 (Linux64)
Document Lastmod2016-09-13 16:29:22
Document TitleAPX TWO-WAY RADIOS
Document CreatorAH XSL Formatter V6.1 MR1 for Linux64 : 6.1.6.12100 (2013/07/19 17:47JST)

af
Dr
Dr
af
Computer Software Copyrights....14
Declaration of Conformity......................... 8
Documentation Copyrights...........15
Important Safety Information........10
Disclaimer.......................................16
Dr
Notice to Users (FCC and
Industry Canada)........................ 11
Getting Started............................... 17
Consignes de sécurité
importantes.................................12
Avis aux utilisateurs (FCC et
Industrie Canada)....................... 13
Version logicielle............................................13
How to Use This Guide..................................17
Notations Used in This Manual......................17
Additional Performance Enhancement.......... 17
ASTRO 25 Enhanced Data.................18
Dynamic System Resilience (DSR).... 18
CrossTalk Prevention..........................18
Encrypted Integrated Data (EID).........18
SecureNet........................................... 18
P25 Digital Vehicular Repeater
System (DVRS)............................. 18
Conventional Talkgroup and Radio
Scan Enhancements......................18
What Your Dealer/System Administrator
Can Tell You.............................................19
af
Software Version........................................... 11
Contents
Contents
English
Keypad Characters – Lowercase
Mode..............................................30
Keypad Characters – Numeric
Mode..............................................32
Keypad Characters – Hexadecimal
Mode..............................................33
Push-To-Talk (PTT) Button............................34
Preparing Your Radio for Use.......20
Turning On the Radio.................................... 20
Adjusting the Volume.....................................21
Validating Compatibility During Power Up..... 21
Identifying Radio Controls............ 22
Dr
Radio Parts and Controls.............................. 22
Control Head and Microphone............ 22
Programmable Features................................ 23
Assignable Radio Functions............... 23
Assignable Settings or Utility
Functions....................................... 26
Accessing the Preprogrammed Functions.....26
Menu Select Buttons...........................27
Advance Programmable Buttons........ 27
Home Button....................................... 28
4-Way Navigation Button.................... 28
Data Feature Button........................... 28
Volume Knob...................................... 29
Using the Mode Knob......................... 29
Keypad.......................................................... 29
Keypad Characters – Uppercase
Mode..............................................29
Identifying Status Indicators.........35
Contents
English
af
Status Icons................................................... 35
Text Messaging Service (TMS) Indicators.....38
TMS Status Icons................................38
TMS Menu Options............................. 39
LED Indicator................................................. 40
Intelligent Lighting Indicators ........................ 41
Alert Tones.................................................... 43
General Radio Operation...............46
Selecting a Zone............................................46
Selecting a Radio Channel............................ 46
Selecting a Channel via Channel Search
Button....................................................... 47
Mode Select Feature..................................... 47
Advanced Call Features................................ 56
af
Advanced Features........................56
Calling a Phone Not in the List............56
Selective Call (ASTRO
Conventional Only)........................ 56
Talkgroup Call Feature
(Conventional Operation Only)...... 57
Sending a Status Call......................... 58
Responding to the Dynamic
Regrouping Feature (Trunking
Only).............................................. 59
Dynamic Zone Programming (DZP)....60
Multiple Control Head Features..................... 62
Setting the ID of the Initial Control
Head.............................................. 62
All Active Mode................................... 63
Activating and Deactivating
Intercom in All Active Mode........... 63
One Active Mode................................ 64
Contacts........................................................ 65
Making a Private Call from Contacts...66
Adding a New Contact Entry...............67
Deleting a Contact Entry..................... 67
Adding a Contact to a Call List............68
Methods of Contact Editing in a
Call List.......................................... 68
Scan Lists...................................................... 70
Viewing a Scan List.............................70
Editing the Scan List........................... 70
Contents
Dr
Saving a Zone and a Channel to a
Softkey...........................................48
Saving a Zone and a Channel to a
Button............................................ 48
Receiving and Responding to a Radio Call... 49
Receiving and Responding to a
Talkgroup Call................................49
Receiving and Responding to a
Private Call (Trunking Only)...........50
Receiving and Responding to a
Telephone Call (Trunking Only)..... 50
Methods to Make a Radio Call.......................51
Making a Talkgroup Call..................... 51
Making a Private Call (Trunking
Only).............................................. 52
Making a Telephone Call (Trunking
Only).............................................. 53
Switching Between Repeater or Direct
Operation Button...................................... 54
Monitor Feature............................................. 54
Monitoring a Channel..........................54
Monitoring Conventional Mode........... 55
English
Dr
Changing the Scan List Status............71
Viewing and Changing the Priority
Status.............................................72
Scan.............................................................. 72
Turning Scan On or Off.......................72
Turning Scan On While
Disregarding the Squelch Code
(Conventional Channels Only)....... 73
Transmitting While the Scan is On......73
Deleting a Nuisance Channel............. 73
Restoring a Nuisance Channel........... 74
Changing Priorities Status While
Scan is On..................................... 74
Restoring Priorities in a Scan List....... 74
Using the Hang Up Box (HUB)........... 75
Call Alert Paging............................................ 75
Receiving a Call Alert Page................ 75
Sending a Call Alert Page...................76
Enabling and Disabling In-Call
User Alert....................................... 77
Quick Call II (ASTRO P25 Digital
Trunking and Conventional)..................... 78
Initiating a Quick Call II
Transmission................................. 78
Emergency Operation....................................78
Sending an Emergency Alarm............ 79
Contents
English
af
Sending an Emergency Call
(Trunking Only).............................. 79
Sending an Emergency Alarm with
Emergency Call............................. 80
Sending a Silent Emergency Alarm.... 80
Special Considerations for
Emergencies.................................. 81
Automatic Registration Service (ARS)...........81
Selecting or Changing the ARS
Mode..............................................82
User Login Feature............................. 83
Text Messaging Service (TMS)..................... 85
Accessing the Messaging Features.... 85
Composing and Sending a New
Text Message................................ 86
Sending a Quick Text Message.......... 87
Priority Status and Request Reply
of a New Text Message................. 88
Secure Operations.........................................95
Enabling Secure Transmission........... 95
Accessing the Secure Feature............96
Managing Encryption.......................... 96
Global Positioning System / Global
Navigation Satellite System.................... 101
GPS Operation................................. 101
GPS Performance Enhancement......102
t
af
Site Trunking Feature....................... 114
Locking and Unlocking a Site............114
Site Display and Search Button........ 114
Trunked Announcement....................115
Ignition Switch Options................................ 116
Blank................................................. 116
Tx Inhibit........................................... 116
PTT Tx Inhibit....................................116
Required........................................... 116
Soft Power Off.................................. 117
Ignition Only Power Up..................... 117
Using Emergency Power Up.............117
Auto Power Off Timer....................... 118
Voice Announcement.................................. 118
Site Selectable Alerts (ASTRO 25)..............119
Sending SSA Notification to Single
Site...............................................120
Sending SSA Notification to Single
Site Via Manual Entry.................. 121
Sending SSA Notification to All
Sites.............................................121
Sending SSA Notification to All
Available Sites............................. 122
Stopping SSA Notification of a
Single Site....................................123
Stopping SSA Notification of a
Single Site Via Manual Entry....... 123
Contents
Dr
The Outdoor Location Feature
(Using GPS).................................102
Accessing the Outdoor Location
Feature........................................ 103
Turning Off GPS............................... 103
Saving a Waypoint............................ 104
Viewing a Saved Waypoint............... 105
Editing the Alias of a Waypoint......... 105
Editing the Coordinates of a
Waypoint......................................106
Deleting a Single Saved Waypoint....107
Deleting All Saved Waypoints...........108
Measuring the Distance and
Bearing from a Saved Waypoint.. 108
Location Feature in Emergency
Mode............................................109
Peer-Location on the Display
(ASTRO Conventional only)........ 109
Geofence (ASTRO 25 Trunking System).... 110
Entering the Geofence Area............. 111
Mission Critical Geofence................. 112
Entering Mission Critical Geofence...112
Exiting Mission Critical Geofence..... 112
Trunking System Controls........................... 113
Operating in Failsoft System.............113
Out-of-Range Radio..........................113
SmartZone........................................ 113
English
Dr
Stopping SSA Notification of All
Sites.............................................124
Stopping SSA Notification of All
Available Sites............................. 125
Channel Change on Off Hook on All
Channels................................................ 125
Low Voltage Threshold Warning..................126
Wi-Fi............................................................ 127
Turning Wi-Fi On or Off.....................127
Checking the Wi-Fi Configuration
and Status of the Radio............... 128
Utilities......................................................... 129
Viewing Recent Calls........................ 129
Selecting the Power Level................ 129
Selecting a Radio Profile...................130
Controlling the Display Backlight...... 131
Turning the Keypad Tones On or
Off................................................ 131
Turning Voice Mute On or Off........... 132
Using the Time-Out Timer.................132
Using Conventional Squelch
Operation Features...................... 132
Using the PL Defeat Feature............ 133
Digital PTT ID Support...................... 134
Smart PTT Feature (Conventional
Only)............................................ 134
Transmit Inhibit................................. 135
General Radio Information................136
External Alarms (Horn and Lights)....139
Helpful Tips.................................. 142
Radio Care.................................................. 142
Cleaning the External Surface of
the Radio..................................... 142
Cleaning the External Plastic
Surface........................................ 142
Accessories..................................144
English
Special Channel Assignments..................... 145
Emergency Channel......................... 145
Non-Commercial Call Channel......... 145
Operating Frequency Requirements............145
Declaration of Compliance for the Use of
Distress and Safety Frequencies............148
Technical Parameters for Interfacing
External Data Sources............................148
Contents
af
Maritime Radio Use in the VHF
Frequency Range..................... 145
Contents
Glossary........................................149
Limited Warranty..........................155
Dr
MOTOROLA COMMUNICATION
PRODUCTS........................................... 155
I. WHAT THIS WARRANTY COVERS
AND FOR HOW LONG:......................... 155
II. GENERAL PROVISIONS:....................... 156
III. STATE LAW RIGHTS:............................157
IV. HOW TO GET WARRANTY SERVICE:.157
V. WHAT THIS WARRANTY DOES NOT
COVER:..................................................157
VI. PATENT AND SOFTWARE
PROVISIONS:........................................ 158
VII. GOVERNING LAW:.............................. 159
VIII. For Australia Only................................ 159
SERVICE..................................................... 160
af
English
Declaration of Conformity
This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below.
Declaration of Conformity
Per FCC CFR 47 Part 2 Section 2.1077(a)
Name: Motorola Solutions, Inc.
af
Declaration of Conformity
Dr
Responsible Party
Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A.
Hereby declares that the product:
Phone Number: 1-800-927-2744
Model Name: APX Mobile
conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)
English
As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies with
Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause undesired operation.
Dr
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules and Industry Canada license-exempt RSS standard. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
Declaration of Conformity
Class B Digital Device
af
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio or TV technician for help.
•
•
•
•
English
Important Safety Information
RF Energy Exposure and Product Safety Guide
for Mobile Two-Way Radios
ATTENTION!
http://www.motorolasolutions.com/APX
af
For a list of Motorola Solutions-approved antennas
and other accessories, visit the following website:
Any modification to this device, not expressly
authorized by Motorola Solutions, may void the user’s
authority to operate this device.
10
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
English
This radio transmitter has been approved by Industry
Canada to operate with Motorola Solutions-approved
antenna with the maximum permissible gain and
required antenna impedance for each antenna type
indicated. Antenna types not included in this list,
having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use
with this device.
Note:
Setting up the radio as an RF Modem takes
complete control of the radio. In this mode, the
radio no longer responds to button and PTT
presses nor will it unmute to voice activity.
This mode is designed to receive and pass
specifically formatted over the air data to a
tethered computer with RF modem enabled
applications. This mode can only be exit by
reprogramming the radio with Customer
Programming Software (CPS) to not operate
in RF modem mode and cycling power.
Important Safety Information
Dr
This radio is restricted to Occupational use only.
Before using the radio, read the RF Energy Exposure
and Product Safety Guide for Mobile Two-Way
Radios which contains important operating
instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards
and Regulations.
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
Notice to Users (FCC and Industry Canada)
Notice to Users (FCC and Industry
Canada)
This device complies with Part 15 of the FCC rules
and Industry Canada's license-exempt RSS's per the
following conditions:
•
•
All the features described in the following sections are
supported by the software version R15.00.00 or later.
See Accessing the Radio Information on page 137 to
determine the software version of your radio.
af
Software Version
Dr
•
This device may not cause harmful interference.
This device must accept any interference
received, including interference that may cause
undesired operation.
Changes or modifications made to this device, not
expressly approved by Motorola, could void the
authority of the user to operate this equipment.
Check with your dealer or system administrator for
more details of all the features supported.
11
English
Consignes de sécurité importantes
Radios bidirectionnelles mobiles : exposition aux
radiofréquences et sécurité du produit
ATTENTION!
Cet émetteur radio a été approuvé par Industrie
Canada pour utilisation avec une antenne approuvée
par Motorola offrant le gain maximal autorisé et
l'impédance requise pour le type d'antenne indiqué. Il
est strictement interdit d'utiliser avec cet appareil tout
type d'antenne ne figurant pas dans cette liste et
présentant un gain supérieur au maximum indiqué
pour le type.
Visitez le site Web suivant pour obtenir la liste des
antennes et des autres accessoires approuvés par
Motorola :
http://www.motorolasolutions.com/APX
12
Selon la réglementation d'Industrie Canada, cet
émetteur radio ne peut être utilisé qu'avec une
antenne dont le type et le gain maximal (ou minimal)
sont approuvés par Industrie Canada pour cet
émetteur. Afin de limiter les interférences radio pour
Français
(Canada)
af
Consignes de sécurité importantes
Dr
Cette radio ne doit être utilisée qu'à des fins
professionnelles. Avant d'utiliser la radio, lisez le
guide Radios bidirectionnelles mobiles : exposition
aux radiofréquences et sécurité du produit, qui
contient d'importantes instructions de fonctionnement
pour une utilisation sécuritaire et des informations sur
l'exposition aux fréquences radioélectriques, dans le
but d’assurer votre conformité aux normes et
règlements en vigueur.
les autres utilisateurs, le type et le gain de l'antenne
doivent être choisis de façon à ce que la puissance
isotrope rayonnée équivalente (P.I.R.E.) ne soit pas
plus forte qu'il ne le faut pour établir la
communication.
Avis aux utilisateurs (FCC et Industrie Canada)
Avis aux utilisateurs (FCC et Industrie
Canada)
Cet appareil est conforme à la partie 15 des règles de
la FCC et d'Industrie Canada permis exemptés RSS
de par la conditions suivantes:
•
•
Toutes les fonctions décrites dans les sections
suivantes sont prises en charge par la version
R15.00.00 ou les versions ultérieures du logiciel de la
radio.
Pour obtenir davantage de renseignements à propos
des fonctions prises en charge, adressez-vous à
votre détaillant ou à votre administrateur de système.
af
Version logicielle
Dr
•
Ce dispositif ne doit pas causer d'interférences
nuisibles.
Cet appareil doit accepter toute interférence
reçue, y compris les interférences qui peuvent
perturber le fonctionnement.
Les changements ou les modifications apportées
à ce dispositif, non expressément approuvées par
Motorola, peuvent annuler le droit de l'utilisateur à
utiliser cet équipement.
13
Français
(Canada)
Computer Software Copyrights
14
English
af
Computer Software Copyrights
Dr
The Motorola products described in this manual may
include copyrighted Motorola computer programs
stored in semiconductor memories or other media.
Laws in the United States and other countries
preserve for Motorola certain exclusive rights for
copyrighted computer programs including, but not
limited to, the exclusive right to copy or reproduce in
any form the copyrighted computer program.
Accordingly, any copyrighted Motorola computer
programs contained in the Motorola products
described in this manual may not be copied,
reproduced, modified, reverse-engineered, or
distributed in any manner without the express written
permission of Motorola. Furthermore, the purchase of
Motorola products shall not be deemed to grant either
directly or by implication, estoppel, or otherwise, any
license under the copyrights, patents or patent
applications of Motorola, except for the normal nonexclusive license to use that arises by operation of
law in the sale of a product.
Documentation Copyrights
Documentation Copyrights
No duplication or distribution of this document or any
portion thereof shall take place without the express
written permission of Motorola. No part of this manual
may be reproduced, distributed, or transmitted in any
form or by any means, electronic or mechanical, for
any purpose without the express written permission of
Motorola.
Dr
af
15
English
Disclaimer
Dr
The information in this document is carefully
examined, and is believed to be entirely reliable.
However, no responsibility is assumed for
inaccuracies. Furthermore, Motorola reserves the
right to make changes to any products herein to
improve readability, function, or design. Motorola
does not assume any liability arising out of the
applications or use of any product or circuit described
herein; nor does it cover any license under its patent
rights, nor the rights of others.
Disclaimer
af
16
English
Getting Started
damage to the equipment if not carefully
observed.
Getting Started
Note:
An operational procedure, practice, or
condition and so on, which is essential to
emphasize.
How to Use This Guide
This User Guide covers the basic operation of the
APX Mobiles.
Dr
However, your dealer or system administrator may
have customized your radio for your specific needs.
Check with your dealer or system administrator for
more information.
Notations Used in This Manual
The following special notations identify certain items.
Example
Description
Home button
or
Buttons and keys are shown in
bold print or as an icon.
PHONE
Menu entries are shown similar to
the way they appear on the display
of the radio.
Warning:
An operational procedure, practice, or
condition and so on, which may result in injury
or death if not carefully observed.
Caution:
An operational procedure, practice, or
condition and so on, which may result in
This means “Press the right side of
the 4-Way Navigation Button”.
af
Throughout the text in this publication, you will notice
the use of Warning, Caution, and Note. These
notations are used to emphasize that safety hazards
exist, and the care that must be taken or observed.
Additional Performance Enhancement
The following performance enhancements are some
of the latest creations designed to enhance the
security, quality and efficiency of the radios.
17
English
ASTRO 25 Enhanced Data
Encrypted Integrated Data (EID)
ASTRO 25 Enhanced Data is optimized to handle
different message sizes and variable update rates
from different applications of the radio. Add Enhanced
Data to the Integrated Data system with a software
installation to improve data channel efficiency and
enable denser network traffic.
Dynamic System Resilience (DSR)
This feature prevents crosstalk scenarios from
happening, especially when a wideband antenna is
used. This feature allows the adjustment of the
internal SSI clock rate of the radio. This subsequently
reduces the possibility of radio frequency interfering
spurs and prevents the issues of crosstalk.
18
English
SecureNet allows user to perform secured
communications on an Analog or Motorola Data
Communication (MDC) channel. The MDC Over-theAir Rekeying (OTAR) feature will allow users to
perform OTAR activities on an MDC channel.
P25 Digital Vehicular Repeater System (DVRS)
Motorola Solutions offers an MSI Certified APX
compatible, 3rd Party, P25 Digital Vehicular Repeater
System (DVRS) that provides low cost portable radio
coverage in areas where only mobile radio coverage
is available and portable radio coverage is either
intermittent or non-existent.
CrossTalk Prevention
SecureNet
af
Getting Started
Dr
DSR ensures the radio system is seamlessly
switched to a backup master site dynamically in case
of system failure. DSR also provides additional
indication e.g. failure detection, fault recovery, and
redundancy within the system to address to the user
in need. Mechanisms related to the Integrated Voice
and Data (IV&D) or data centric are all supported by
DSR.
EID provides security encryption and authentication of
IV&D data bearer service communication between the
radio and the Customer Enterprise Network.
Conventional Talkgroup and Radio Scan
Enhancements
A few enhancements have been made to the
Conventional Talkgroup at the system. These
enhancements improve the Scan feature operation
significantly when multiple agencies are using a
What Your Dealer/System Administrator Can
Tell You
Check with your dealer or system administrator, if the
radio is to be operated in extremely cold temperatures
(less than -30 °C or more than +60 °C), for the correct
radio settings to ensure proper operation.
You can consult your dealer or system administrator
about the following:
Up to 30 different talkgroups can be supported using
conventional channels. A maximum of four talkgroups
can be supported when Vote Scan channels are
being used.
•
Smart PTT is supported with this enhancement as
Smart PTT prevents users from transmitting while
other users are on the channel.
•
•
Is your radio programmed with any preset
conventional channels?
Which buttons have been programmed to access
other features?
What optional accessories may suit your needs?
Note:
Specifications may vary for different radio
models. Check with your dealer or system
administrator for more information.
af
Note:
User Selectable Talkgroups are not
compatible with this Conventional Talkgroup
Enhancement.
Getting Started
Dr
single conventional radio frequency channel. These
enhancements allow users to use Selective Squelch
to operate on only the subset of talkgroups that are
relevant to the users rather than all talkgroups on the
channel. These Scan improvements have been made
to eliminate the audio holes that were present and to
turn on the busy LED when activity is present on the
channel. Mixed Vote Scan and Standard
Conventional Scan configurations are supported.
Priority Operation is also supported.
19
English
Note:
Pressing the Power On/Off Button before
the LED lights up will be ignored.
Preparing Your Radio for Use
This section provides simple instructions to prepare
your radio for use.
If FAIL ##/## appears in the display, the
radio will not function until the condition
has been corrected.
Turning On the Radio
If ERROR ##/## appears, some non-critical
data has been changed. If either of these
displays appear, if the display goes blank,
or if the unit appears to be locked up, see
Helpful Tips on page 142 for more
information.
briefly to
Dr
Preparing Your Radio for Use
1 Press the Power On/Off Button
power on the radio.
The backlight turns on to the last selected dim
level.
20
English
If your radio does not power up, contact
your dealer.
af
After a short time, the red, yellow and green LEDs
light up. The display then shows Zone and
channel text, and menu items display on the
screen.
If CH MISMATCH appears, means that either
the Control Head has been connected to
an incompatible transceiver, or vice versa.
2 To turn off the radio, press the Power On/Off
Button after the LEDs light up.
Note:
The duration that user must press and hold
the Power On/Off Button to turn off the
Adjusting the Volume
1 To increase the volume, rotate the Volume Knob
clockwise.
Dr
Press the Power On/Off Button to reset when the
display shows UPDATE DONE PLEASE RESET upon
completion, or when the display shows UPDATE
FAILED PLEASE RESET when it fails to update.
If the software updates are complete, the radio runs
the usual power up operation.
If the updates are incomplete, the radio runs the
Maintenance Mode and the display shows
MAINTENANCE MODE REMOTE DEVICE; promptly
followed by other maintenance statuses again.
Validating Compatibility During Power Up
The radio validates and updates the software and
hardware of your control head(s) during power up.
During validation, the display shows MAINTENANCE
MODE REMOTE DEVICE; promptly followed by other
maintenance statuses.
Note:
If SW INCOMPLETE appears, use Flashport
Recovery Tool to update the control heads
before you power on the radio again.
af
2 To decrease the volume, rotate this knob
counterclockwise.
Preparing Your Radio for Use
radio is programmable by a qualified radio
technician.
21
English
Identifying Radio Controls
22
Radio Parts and Controls
17
18
Control Head and Microphone
16
15
11
14
13
Identifying Radio Controls
Note:
The microphone is not part of a radio. It is an
optional accessory.
Accessory Port (Microphone)
Menu Select Button[1]
English
af
22
Dr
19
12
10
21
20
Menu Entries
LED Indicators
Navigation Button
Accy 2-Dot Button[1]
Accy 1-Dot Button[1]
9
Push-to-Talk (PTT) Button
Programmable Features
Button[1]
10
Orange
11
Mode Knob
12
Indicators
13
Power On/Off Button
14
Home Button
15
Dim Button
16
Volume Knob
17
Data Feature Button[1]
18
Home Button (Microphone)
19
Keypad Buttons
20
Okay/Select Button ( )
21
Cancel Button (X)
22
Navigation Button (Microphone)
Identifying Radio Controls
Accy No-Dot Button (Purple)[1]
Any reference in this manual to controls that are
preprogrammed means that a qualified radio
technician must use the radio programming software
to assign a feature to a control.
Dr
Your dealer can program the programmable buttons
as shortcuts to radio functions or preset channels/
groups depending on the duration of a button press:
Press
Pressing and releasing rapidly.
Long press Pressing and holding for the
preprogrammed duration (between
0.25 seconds and 3.75 seconds).
af
These radio controls/buttons are programmable.
Hold down Keeping the button pressed.
Assignable Radio Functions
Call Alert
Allows the radio to function like
a pager, or to verify if a radio is
active on the system.
23
English
Selects a channel.
Contacts
Selects the Contacts menu.
Dynamic ID
(Conventional
Only)
Allows you to edit the ASTRO
Individual ID and/or MDC
Primary ID of the radio.
Dynamic Priority
(Conventional
Only)
Allows any channel in a Scan
List (except for the Priority-One
channel) to temporarily replace
the Priority-Two channel.
Emergency
Depending on the
programming, initiates or
cancels an emergency alarm or
call.
Display the Internet Protocol
(IP) address, device name and
status of the radio.
Location
Determines the current location
(latitude, longitude, time and
date), and also the distance
and bearing to another location.
Or, turns the GPS functionality
on or off for all locations.
Message
Enters the current message list.
Monitor
(Conventional
Only)
Monitors a selected channel for
all radio traffic until function is
disabled.
Multiple Private
Line
(Conventional
Only)
Selects the Multiple Private
Line lists.
Information
Displays the information of the
radio.
Intercom
Enables users of multiple
control heads to talk to each
other via the control heads in a
multi-control head setup.
Nuisance Delete
Temporarily removes an
unwanted channel, except for
priority channels or the
designated transmit channel
from the scan list.
Identifying Radio Controls
Channel
Internet Protocol
Address
af
English
Allows you to answer a private
call or phone call.
Dr
24
Call Response
Phone
Recent Calls
Repeater Access
Button (RAB)
(Conventional
Only)
Allows easy access to a set of
preprogrammed visual and
audio settings of the radio.
Request-To-Talk
(Conventional
Only)
Notifies the dispatcher you
want to send a voice call.
Scan
Toggles scan on or off.
Scan List
Programming
Selects the scan list for editing
(by long press on the Scan
button).
Secure/Clear
Toggles secure transmission
on or off.
Allows easy access to the list of
calls recently received or made.
Notifies the dispatcher you
want a new encryption key.
Allows user to manually send a
repeater access codeword.
Selective Call
(Conventional
Only)
Calls an assigned radio.
Siren
Turns different Siren Tones on
or off.
Rekey Request
Allows a call from an individual
radio to another individual
radio.
Notifies the dispatcher you
want a new dynamic
regrouping assignment.
af
Radio Profiles
Dr
Private Call
(Trunking Only)
Allows you to make and receive
calls similar to standard phone
calls.
Reprogram
Request
(Trunking Only)
Identifying Radio Controls
Launches a specific feature
with one single button-press.
You can setup as many as four
separately programmed
buttons for four different
features.
Displays the current site ID and
Site Display/
Search (Trunking RSSI value; performs site
search for Automatic Multiple
Only)
Site Select (AMSS) or
SmartZone operation.
25
English
Site Lock/Unlock
(Trunking Only)
Locks onto a specific site.
Status (Astro 25
Trunking Only)
Sends data calls to the
dispatcher about a predefined
status.
Allows a call from an individual
radio to a group of radios.
Text Messaging
Service (TMS)
Selects the text messaging
menu.
TMS Quick Text
Selects a predefined message.
User
Automatically registers with the
server.
Zone Down
Toggles downward through the
zones in the radio.
Zone Select
Allows selection from a list of
zones.
Changes the display
brightness.
Front/Rear
Switches one of two control
heads to be active at one
time.
Horns/Lights
Toggles horns and lights
feature on or off.
Keypad Lock
Toggles the keypad lock on
or off.
Low Power
Toggles transmit power level
between high and low.
Toggles upward through the
zones in the radio.
Voice
Announcement
English
Dim
af
Talkgroup
(Conventional
Only)
Zone Up
26
Dr
Identifying Radio Controls
Talkaround/Direct Toggles between using a
repeater and communicating
(Conventional
directly with another radio.
Only)
Assignable Settings or Utility Functions
Voice Mute
Audibly indicates the current
feature mode, Zone or
Channel the user has just
assigned.
Toggles voice mute on or off.
Accessing the Preprogrammed Functions
You can access various radio functions through one
of the following methods.
•
Advance Programmable Buttons
A short or long press of the relevant
programmable buttons.
Use the Menu Select Button (
Identifying Radio Controls
•
This feature is to help you to shorten the process of
applying certain common features.
).
Menu Select Buttons
Dr
Note:
Check with your dealer or system
administrator for the list of features activated
in your radio.
Use the Menu Select button to access the menu
entry of your radio feature. Your radio may be
preprogrammed differently from the following
example, but the steps for selecting a channel may
appear as shown below:
af
Press the Menu Select button (
CHAN.
) directly below
Orange Button[2]
Menu Select Buttons[2]
27
English
C
Accy No-Dot Button (Purple)[2]
Accy 1-Dot Button[2]
Accy 2-Dot Button[2]
button returns you to the Home
Pressing the
(default) screen. In most cases, this is the current
mode. For selected radio features, the
button is
also used to save user-edited radio settings or
information before returning you to the Home screen.
Note:
Some features do not require you to press
to go to the Home screen. Refer to the
individual feature sections in this manual for
28
4-Way Navigation Button
Use the 4-Way Navigation Button to scroll up, down,
left or right with one of the following methods.
•
•
Press and release one of the button to scroll from
one entry to the next one.
Press and hold one of the button to have the radio
toggles through the list automatically (release the
button to stop).
Data Feature Button
Use Data Feature button to access data-related
features, such as the Text Messaging Service (TMS)
feature screen.
Identifying Radio Controls
Enters a menu with a short press on
the preprogrammed One Touch
button. Features assigned to these
buttons are Call, Call Alert, Phone,
Repeater Access, MDC RTT Button
Access, Status and Message.
af
Home Button
The
button also can revert to home channel from
any other zone and mode in the radio. Check with
your dealer or system administrator for more
information.
Dr
(Quick
Access)
One Touch
Button
further details on saving user-edited radio
settings or information.
These programmable buttons support the One Touch Button feature.
English
Identifying Radio Controls
The keypad functions in a manner similar to a
standard telephone keypad when entering numeric
digits. When the keypad is used to edit a list, each
key can generate different characters of the alphabet.
The following tables show the number of times a key
needs to be pressed to generate the required
character.
Volume Knob
Use this Volume Knob to adjust the volume of the
speakers by turning it clockwise or counterclockwise.
Using the Mode Knob
Use this Mode Knob to scroll through the
channels by turning it clockwise or
counterclockwise.
Dr
Keypad
Key
Number of Times Key is Pressed
10
11
12
13
af
You can use the 3 x 4 alphanumeric keypad on the
keypad microphone to access your radio’s features.
Keypad Characters – Uppercase Mode
14
15
16
17
18
19
20
21
“
‘
29
English
Key
Number of Times Key is Pressed
10
11
12
13
14
15
16
17
18
19
20
21
Dr
af
Identifying Radio Controls
Toggle between mixed case mode, uppercase mode and lowercase mode.
Space
Toggle between numeric and letter mode.
Keypad Characters – Lowercase Mode
Key
30
English
Number of Times Key is Pressed
10
11
12
13
14
15
16
17
18
19
20
21
“
‘
Identifying Radio Controls
Key
Number of Times Key is Pressed
10
11
12
13
14
15
16
17
18
19
20
21
af
Dr
Space
Toggle between mixed case mode, uppercase mode and lowercase mode.
Toggle between numeric and letter mode.
31
English
Keypad Characters – Numeric Mode
Key
Number of Times Key is Pressed
10
11
12
13
14
15
16
17
18
19
20
21
“
‘
Space
32
English
Toggle between numeric and letter mode.
af
Identifying Radio Controls
Dr
Identifying Radio Controls
Keypad Characters – Hexadecimal Mode
Key
Number of Times Key is Pressed
10
11
12
13
14
15
16
17
18
19
20
21
af
Dr
Not applicable
Not applicable
33
English
•
Push-To-Talk (PTT) Button
While a call is not in progress, the PTT button is
used to make a new call. See Methods to Make a
Radio Call on page 51 for more information.
•
While a call is in progress, the PTT button allows
the radio to transmit to other radios in the call.
Press and hold down PTT button to talk. Release
the PTT button to listen. The microphone is
activated when the PTT button is pressed.
34
English
af
Identifying Radio Controls
Dr
The PTT button on the side of the microphone
serves two basic purposes:
Status Icons
Off – Radio is connected with other radios through a repeater.
The liquid crystal display (LCD) of your radio shows
the radio status, text entries, and menu entries. The
following are the icons that appear on the display of
the radio.
Monitor (Carrier Squelch)
Selected channel is being monitored
(during conventional operation only).
Dr
Receiving
Identifying Status Indicators
On – Radio is currently configured for direct radio-to-radio communication (during conventional operation only).
Identifying Status Indicators
In-Call User Alert
Transmitting
On – The feature is enabled. Voice muting of the affiliated trunking talkgroup or
selected conventional channel is activated.
af
Radio is receiving a call or data.
Radio is transmitting a call or data.
Received Signal Strength Indicator
(RSSI)
The number of bars displayed represents the received signal strength for the
current site, for trunking only. The more
stripes in the icon, the stronger the signal.
or
Off – The feature is disabled. Voice muting of the affiliated trunking talkgroup or
selected conventional channel is deactivated.
Power Level
L – Radio is set at Low power.
Direct
35
English
H – Radio is set at High power.
On – AES secure operation.
Off – Clear operation.
Scan
Blinking – Receiving an encrypted
voice call.
Radio is scanning a scan list.
Priority Channel Scan
GPS Signal
Blinking dot – Radio detects activity on
channel designated as Priority-One.
Dr
On – Feature is enabled and signal is
available.
Identifying Status Indicators
Steady dot – Radio detects activity on
channel designated as Priority-Two.
Off – Feature is disabled.
Blinking – Feature is enabled, but no
signal is available.
Vote Scan Enabled
af
The vote scan feature is enabled.
Secure Operation
Off – Clear operation.
Blinking – Receiving an encrypted
voice call.
AES Secure Operation
36
English
On – Secure operation.
User Login Indicator (IP Packet Data)
On – User is currently associated with
the radio.
Off – User is currently not associated
with the radio.
Blinking – Device registration or user
registration with the server failed due to
an invalid username or pin.
Indicates that the text entry is currently
in uppercase mode.
Data Activity
Lowercase
Data activity is present.
Indicates that the text entry is currently
in lowercase mode.
Identifying Status Indicators
Inverted – User successfully login to the
secured IP Packet Data.
Hexadecimal
Lowercase Predictive
Numeric
Dr
Indicates that the text entry is currently
in hexadecimal mode.
Indicates that the text entry is currently
in lowercase and with predicted words
shown at the bottom of the screen.
Mixedcase Predictive
Start Case
Indicates that the text entry is currently
in mixed case and with predicted words
shown at the bottom of the screen.
Indicates that the first character of the
text entry is capitalized.
Mixed Case
Indicates that the text entry is currently
in normal text mode.
Uppercase
af
Indicates that the text entry is currently
in numeric mode.
Uppercase Predictive
Indicates that the text entry is currently
in uppercase and with predicted words
shown at the bottom of the screen.
37
English
The radio Wi-Fi® network is connected.
The number of bars displayed represents the signal strength of the Wi-Fi
signal.
Message Unsent
The text message cannot be sent.
Unread Message
•
•
Text Messaging Service (TMS) Indicators
The Inbox is full.
Message Sent
The text message is sent successfully.
38
English
The selected text message in the Inbox
has been read.
Normal Message
User is composing a message with normal
priority and without a request for a reply.
Identifying Status Indicators
The following icons appear on the radio’s display
when you send and receive text messages.
Inbox Full
Read Message
af
TMS Status Icons
Dr
This feature allows you to send and receive text
messages. Status icons and menu options shown
here help you to work more efficiently with TMS
feature. See Text Messaging Service (TMS) on page
85 for more information.
User receives a new message.
The selected text message in the Inbox
has not been read.
Message Index
Indicates the index of the current message
the user is viewing.
Example: If the user is looking at the third
message out of a total of 6 messages in
Priority Status
•
•
The “Priority” feature is toggled on before the message is sent.
Messages in the Inbox folder are flagged with “Priority”.
•
The “Request Reply” feature is toggled
on before the message is sent.
Messages in the Inbox folder are flagged with “Request Reply”.
TMS Menu Options
Menu
Option
Description/Function
INBX
Brings you to your incoming messages
screen.
COMP
Brings you to the compose screen.
DRFT
Brings you to the saved message
screen.
BACK
Brings you back to the previous screen.
SAVE
Saves the messages you have edited to
the Draft folder.
af
•
Dr
Request Reply
Brings you to the sent messages screen.
Priority Status and Request Reply
NEW
Creates a new message.
•
LIST
Brings you to the predefined messages
screen.
IMPT
Toggles the “Priority Status” icon on or
off for an outgoing message.
RQRP
Toggles “Request Reply” icon on or off
for an outgoing message.
•
SENT
User is composing a message with a
priority status and a request for a reply.
Messages in the Inbox folder are flagged with “Priority” and “Request Reply”.
Identifying Status Indicators
the Inbox folder, the icon is displayed as
the icon on the left column.
39
English
Deletes the current selected message.
ALL
Selects to delete all the messages in the
current folder.
DEL
Deletes a message or text.
EDIT
Edits a draft message or key in a target
address.
EXIT
Exits to the Home screen.
Red LED
NO
Cancel the delete all messages options.
Yellow LED
OPTN
Brings you to the Options main screen.
RPLY
Replies to a message.
SEL
Selects a predefined message or address.
The LED indicator shows the operational status of
your radio.
SEND
Sends the message.
YES
Deletes all the messages in the current
folder.
Green LED
Solid red
Radio is transmitting.
Rapidly blinking
red
Radio has failed the self test
upon powering up or
encountered a fatal error.
Solid yellow
(Conventional
Only)
Channel is busy.
Identifying Status Indicators
CURR
LED Indicator
af
English
Description/Function
Dr
40
Menu
Option
Solid green
Radio is powering up, or is on
a non-priority channel while in
the Scan List Programming
mode.
Blinking green
Radio is receiving an individual
or telephone call, or is on a
Priority-Two channel while in
the Scan List Programming
mode.
Rapidly blinking
green
Identifying Status Indicators
Radio is receiving a secured
transmission.
Radio is on a Priority-One
channel while in the Scan List
Programming mode.
Dr
Blinking yellow
Intelligent Lighting Indicators
af
This feature temporarily changes the display backlight color and the alert text background color of the radio to help
signal that a radio event has occurred.
Note:
This feature must be preprogrammed by a qualified radio technician.
Backlight and Bar
Color
Notification
When
Orange
Emergency Alerts
The radio initiates an emergency alarm or call.
The radio receives an emergency alarm or call.
41
English
Backlight and Bar
Color
Notification
When
Red
Critical Alerts
The radio battery is low.
The radio is out of range.
The radio enters Failsoft mode.
Dr
The radio is unable to establish a full connection with the system.
af
Identifying Status Indicators
The radio is unable to authenticate or register with the system.
The radio lost GPS signal or GPS function fails.
Green
Call Alerts
The radio receives a private call.
The radio receives a phone call.
The radio receives a call alert.
The radio receives a selective call.
The radio enters Geofence.
42
English
Identifying Status Indicators
Alert Tones
Your radio uses alert tones to inform you of the condition of your radio. The following table lists these tones and
when they occur.
You Hear
Tone Name
Heard
Short, LowPitched Tone
Radio Self Test Fail
When radio fails its power-up self test.
Reject
When an unauthorized request is made.
Dr
Four seconds before time out.
No ACK Received
When radio fails to receive an acknowledgment.
Individual Call Warning
Tone
When radio is in an individual call for greater than 6 seconds
without any activity.
af
Long, LowPitched Tone
Time-Out Timer Warning
Time-Out Timer Timed Out
After time out.
Talk Prohibit/PTT Inhibit
(When PTT button is pressed) transmissions are not allowed.
Lack of Voice PTT Time out When the radio ends your call after it detected there are lack of
voice for 5 seconds after the PTT is pressed and hold. Your radio ends the call to enable your radio to receive calls from other
radio users.
Out of Range
(When PTT button is pressed) the radio is out of range of the
system.
Invalid Mode
When radio is on an unpreprogrammed channel.
43
English
You Hear
Tone Name
Heard
A Group of
Low-Pitched
Tones
Busy
When system is busy.
When a correct key is pressed.
Short, Medium- Valid Key-Press
Pitched Tone
Radio Self Test Pass
When radio passes its power-up self test.
At beginning of a non-coded communication.
Clear Voice
When activity on a priority channel is received.
Emergency Alarm /Call Entry
When entering the emergency state.
Central Echo
Long, MediumPitched Tone
Volume Set
Emergency Exit
Console Acknowledge
44
English
When central controller has received a request from a radio.
When volume is changed on a quiet channel.
When exiting the emergency state.
A Group of Me- Failsoft
dium-Pitched
Automatic Call Back
Tones
Keyfail
af
Identifying Status Indicators
Dr
Priority Channel Received
When the trunking system fails.
When voice channel is available from previous request.
When encryption key has been lost.
When status, emergency alarm, or reprogram request ACK is received.
Heard
Received Individual Call
When Call Alert or Private Call is received.
Call Alert Sent
When Call Alert is received by the target radio.
Site Trunking
When a SmartZone trunking system fails.
Short, HighPitched Tone
(Chirp)
Low-Battery Chirp
When battery is below preset threshold value.
Two HighPitched Tones
GPS Fails
Ringing
Fast Ringing
Dr
Tone Name
Phone Call Received
Dynamic Regrouping
When the GPS signal is lost or when GPS fails.
When system is searching for target of Private Call.
af
Enhanced Call Sent
Gurgle
Identifying Status Indicators
You Hear
When waiting for target of Private Call to answer the call.
When a land-to-mobile phone call is received.
(When PTT button is pressed) a dynamic ID has been received.
Talk Permit
(When PTT button is pressed) is verifying with the system for accepting its transmissions.
Unique, LowPitched Chirp
New Message
When a new message is received.
Unique, HighPitched Chirp
Priority Status
When a priority message is received.
45
English
d) Press the PTT button to transmit on the
displayed zone channel.
General Radio Operation
Selecting a Zone
Selecting a Radio Channel
Your radio must be preprogrammed to allow you to
use this feature.
•
Select a zone via the Mode Knob:
a) Rotate the Mode Knob until the display shows
the desired zone.
•
Select a zone via the radio menu ZONE:
b)
or to ZONE and press the Menu Select
button directly below ZONE.
or to the required zone, or use the keypad to
enter the zone number.
c) Press
or the PTT button to confirm the
selected zone number.
46
English
Select a channel via the Mode knob:
a) Rotate the Mode knob until the display shows
the desired channel.
b) Press the PTT button to begin transmitting on
the displayed channel.
•
Select a channel via the radio menu CHAN:
a)
•
af
General Radio Operation
Dr
A zone is a group of channels. The following methods
are options on how to select a radio zone. The result
of all the methods is the same. You can use the
options interchangeably depending on your
preference and the programmed functions.
A channel is a group of radio characteristics, such as
transmit/ receive frequency pairs. The following
methods are options on how to select a radio
channel. The result of all the methods is the same.
You can use the options interchangeably depending
on your preference and the programmed functions.
a)
or to CHAN.
b) Press the Menu Select button directly below
CHAN.
c) or to the required channel.
d) Press the Menu Select button directly below
SEL to confirm the selected channel.
Selecting a Channel via Channel Search
Button
Dr
This feature allows you to do a quick search for a
specific channel in your radio by keying in the alias of
the channel. If the name matches, your radio prompts
the first found matched channel name.
1 Perform one of the following actions:
Press the preprogrammed Channel Search
button.
•
or to CHSR and press the Menu Select
button directly below CHSR.
To exit this procedure, press the Menu Select
button directly below CNCL.
The display shows SEARCHING. Once found, the
display shows the matched channel name and the
radio changed its transmission to the selected
channel.
If the radio is triggered to search for an empty entry,
the display shows INVALID ENTRY. Repeat step 2 to
search again.
If the entry does not match, the display shows
CHANNEL NAME NOT FOUND. Repeat step 2 to search
again; or press
or the Menu Select button directly
below EXIT to exit.
af
•
General Radio Operation
e) Press the PTT button to transmit on the
displayed zone channel.
2 Use the keypad to type or edit your channel
name.
3 To initiate searching, press the Menu Select
button directly below CHSR once the entry is done.
Mode Select Feature
Mode Select allows a long press to save the current
zone and channel of your radio to a programmable
button, keypad button, or a softkey; then once
programmed, the short-press of that button or softkey
changes the transmission to the saved zone and
channel.
A blinking cursor appears on the Channel Search
screen.
There are two methods to save the selected zone and
channel:
47
English
•
•
Softkeys
Programmable buttons and keypad buttons (digit 0
to 9)
Note:
Your radio must be preprogrammed to allow
you to use this feature.
Saving a Zone and a Channel to a Softkey
Saving a Zone and a Channel to a Button
You can save the frequent used zone and channel to
the programmable buttons and keypad digit 0 to 9
buttons.
Five softkeys are available for you to save the
frequently used zone and channel.
1 Toggle your zone and channel to the required
zone and channel.
1 Toggle your zone and channel to the required
zone and channel.
2 Press and hold the button you desire to program.
Dr
or to MS1, MS2 ... or MS5.
3 Press and hold the Menu Select button directly
below one of the softkey (MS1 – MS5).
Note:
To change the programmed zone and
channel, repeat this procedure.
English
Note:
Repeat this procedure to change the zone and
channel of the programmed button.
You hear a short, medium-pitched tone when the
zone and channel is saved.
48
You hear a short, medium-pitched tone when the
zone and channel is saved.
af
General Radio Operation
Short press of the programmed softkey
changes your current transmission to the zone
and channel programmed in this softkey.
Short press of the programmed button
changes your current transmission to the zone
and channel programmed in this button.
Once you have selected the required channel and/or
zone, you can proceed to receive and respond to
calls.
Red LED
Yellow LED
Green LED
To receive a call from a group of users, your radio
must be configured as part of that talkgroup.
When you receive a talkgroup call (while on the Home
screen) the radio triggers for your attention with one
of the following scenarios depending on the system
your radio is configured:
•
For ASTRO Conventional system, the LED lights
up solid yellow. The display shows the talkgroup
alias or ID, and the caller alias or ID.
For Trunking system, the display shows the caller
alias or ID.
af
Receiving and Responding to a Talkgroup Call
•
Dr
General Radio Operation
Receiving and Responding to a Radio Call
If the radio is receiving a secure transmission, the
LED blinks yellow.
2 Press the PTT button to respond to the call.
The LED lights up solid red.
The LED lights up solid red while the radio is
transmitting. In conventional mode, the LED lights up
solid yellow when the radio is receiving a
transmission. In trunking mode, there is no LED
indication when the radio receives a transmission.
1 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3 Release the PTT button to listen.
See also Making a Talkgroup Call on page 51 for
details on making a Talkgroup Call.
49
English
Receiving and Responding to a Private Call (Trunking
Only)
A Private Call is a call from an individual radio to
another individual radio.
3 Press
screen.
af
General Radio Operation
Note:
With the inactivity timer enabled (optional),
when there is no response from the receiving
radio, the calling radio exits the call with Menu
Inactive Exit tone after the timer expires.
1 Press the Menu Select button directly below RESP
within 20 seconds after the call indicators begin.
If the caller alias is in the call list, the display
shows the caller alias during the call.
50
English
If the caller name is not in the call list, the display
shows the caller ID.
If 20 seconds pass before you press the Menu
Select button directly below the RESP, you will
not respond privately to the call just received.
Instead, you initiate a Private Call.
See also Making a Private Call (Trunking Only) on
page 52 for details on making a Private Call.
Receiving and Responding to a Telephone Call
(Trunking Only)
When you receive a Private Call, you hear two alert
tones and the LED blinks green. The display shows
CALL RECEIVED and the caller alias or ID.
to hang up and return to the Home
Note:
If you press PTT button before pressing the
Menu Select button directly below RESP, your
conversation will be heard by all members of
the talk group.
Dr
The one-to-one call between the two radios are not
heard by the others in the current talkgroup. The
calling radio automatically verifies that the receiving
radio is active on the system and can display the
caller ID.
2 Press and hold the PTT button to talk. Release the
PTT button to listen.
This feature allows you to receive calls similar to
standard phone calls from a landline phone.
Note:
With the inactivity timer enabled (optional), if
there is no response to the call after the timer
•
The Contacts list (see Contacts on page 65).
Note:
The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the
radio is left idle and the timer expires. You will
hear the Menu Inactive Exit Tone upon feature
exit.
When you receive a Telephone Call, you hear a
telephone-type ringing and the LED blinks green. The
backlight of the screen turns green.The display shows
PHONE CALL and the call received icon blinks.
1 Press the Menu Select button directly below
RESP.
Dr
2 Press and hold the PTT button to talk. Release the
PTT button to listen.
Making a Talkgroup Call
To make a call to a group of users, your radio must
be configured as part of that talkgroup.
1 Perform one of the following actions:
•
af
3 Press
or the Menu Select button directly below
EXIT to hang up and return to the Home screen.
See also Making a Telephone Call (Trunking Only) on
page 53 for details on making a Telephone Call.
You can select a zone, channel, subscriber ID, or
talkgroup by using:
•
•
•
The preprogrammed Zone menu.
The Mode Knob.
A preprogrammed One Touch button.
•
or to TGRP and press the Menu Select
button directly below TGRP. The display shows
the last-selected talkgroup. Press the Menu
Select button directly below SEL.
Use the Mode Knob to select the channel with
the desired talkgroup.
Methods to Make a Radio Call
General Radio Operation
expires, your radio exits the call with Menu
Inactive Exit tone.
2 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3 Press the PTT button to make the call.
The radio shows different indicators based on the
system the radio is configured.
51
English
•
•
For ASTRO Conventional system, the LED
lights up solid red. The display shows the
talkgroup alias or ID.
For Trunking system, the LED lights up solid
red.
4 Speak clearly into the microphone.
5 Release the PTT button to listen.
Dr
Making a Private Call (Trunking Only)
Your radio must be preprogrammed to allow you to
use this feature.
General Radio Operation
•
52
English
To access this feature via a preprogrammed
button, press the preprogrammed Quick
Access (One-Touch) Private Call button to
dial the preprogrammed ID (number) and
initiate the Private Call. Proceed to step 5.
To access this feature via the menu, proceed
to the next step.
or to CALL, and press the Menu Select button
directly below CALL.
The display shows the last transmitted or received
ID.
3 To select the required ID, perform one of the
following actions:
•
•
•
•
Press the Menu Select button directly below
CNTS to scroll through and select the required
ID.
Press the Menu Select button directly below
LIST to go to the first number of the call list.
or to the required ID.
Use the keypad to enter the required ID.
1 Perform one of the following actions:
af
This feature allows you to send an individual Call
Alert or page if there is no answer from the target
radio. See Sending a Call Alert Page on page 76 for
more information.
•
4 Press the PTT button to initiate the Private Call.
A telephone-type ringing sounds if the receiving
unit is in service. The display shows CALLING...
 or CALLING... .
5 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
If no acknowledgment is received, the display
shows NO ACKNOWLEDGE.
If the target radio does not respond before the
time out, the display shows NO ANSWER.
or to PHON, and press the Menu Select button
directly below PHON.
The display shows the last transmitted or received
ID.
3 To select the required ID, perform one of the
following actions:
•
7 Press
•
Dr
6 Press and hold the PTT button to talk. Release the
PTT button to listen.
to return to the Home screen.
Making a Telephone Call (Trunking Only)
1 Perform one of the following actions:
•
To access this feature via a preprogrammed
button, press the preprogrammed Quick
Access (One-Touch) Phone Call button to
dial the preprogrammed phone number.
Proceed to step 5.
To access this feature via the menu, proceed
to the next step.
•
Press the Menu Select button directly below
CNTS to scroll through and select the required
ID.
Press the Menu Select button directly below
LIST to go to the first number of the call list.
or to the required phone number.
Use the keypad to enter the required phone
number.
4 Press the PTT button to dial the phone number.
•
•
af
This feature allows you to make calls similar to
standard phone calls to a mobile or landline phone.
General Radio Operation
When you are connected, the display shows the
ID of the target radio.
5 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
6 When your call is answered, press and hold the
PTT button to talk. Release the PTT button to
listen.
53
English
7 Press
The display shows REPEATER MODE if the radio is
currently in Repeater mode.
to return to the Home screen.
See Alert Tones on page 43 for more information if
your call is NOT answered.
Switching Between Repeater or Direct
Operation Button
Monitor Feature
The Repeater Operation increases the radio
coverage area by connecting with other radios
through a repeater. The transmit and receive
frequencies are different.
Radio users who switch from analog to digital radios
often assume that the lack of static on a digital
channel is an indication that the radio is not working
properly. This is not the case.
The Direct or “talkaround operation” allows you to
bypass the repeater and connect directly to another
radio. The transmit and receive frequencies are the
same.
Digital technology quiets the transmission by
removing the noise from the signal and allows only
the clear voice or data information to be heard.
Dr
Perform one of the following actions:
•
54
English
Press the preprogrammed Repeater/Direct
switch to toggle between talkaround and
repeater modes.
or to DIR and press the Menu Select button
directly below DIR.
Use the Monitor feature to make sure a channel is
clear before transmitting.
•
af
General Radio Operation
The display shows DIRECT MODE and the Talkaround
icon if the radio is currently in Direct mode (during
conventional operation only).
Monitoring a Channel
•
Monitoring a Channel in Conventional Modes:
a) Lift the microphone off hook.
b) Listen for activity on that channel.
c) Adjust the Volume Knob if necessary.
•
Dr
Monitoring a Channel in Trunked Modes:
a) Lift the microphone off hook.
b) Press the PTT button.
c) If you hear two, short, high-pitched tones, or if
you hear no tone and the
indicator lights
steadily, then proceed with your message.
d) Release the PTT button to receive (listen).
Monitoring Conventional Mode
1 To activate monitoring, perform one of the
following actions:
•
•
At Home mode where the default zone and
channel are being displayed, or to MON and
press the Menu Select button directly below
MON momentarily.
Take the control head off hook.
The display shows MONITOR ON. You hear all
channel traffic.
2 Press the Menu Select button again to deactivate
the monitoring.
The display shows MONITOR OFF.
af
If you are not in the range of the system, you may
hear a continuous low-pitched tone and the display
shows OUT OF RANGE.
General Radio Operation
d) If you hear no activity, press and hold the PTT
button to start your conversation.
This feature must first be enabled by a qualified radio
technician or system administrator.
This feature allows you to monitor channel traffic on
conventional channels by defeating the coded
squelch. Thus, you can to listen to another user
active on the channel. This way, you may be
prevented from talking over someone else’s
conversation.
MONITOR ON shown on the display indicates that the
radio is monitoring. Pressing the Menu Select button
again turns monitor off and you don’t hear all channel
traffic. If you try to transmit on a receive-only channel,
you hear an invalid tone until you release the PTT
button.
55
English
and to eliminate the annoyance of having to listen to
conversations that are of no interest to you.
Advanced Features
Receiving a Selective Call
Advanced Call Features
When you receive a Selective Call, you hear two alert
tones and the LED lights up solid yellow. The call
received icons blink and the display alternates
between CALL RECEIVED and the home display.
Calling a Phone Not in the List
or to PHON.
Dr
2 Press the Menu Select button directly below
PHON.
3 Enter the desired phone number on the keypad.
The display updates as the numbers are entered.
The speaker unmutes.
1 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
2 Press and hold the PTT button to talk. Release the
PTT button to listen.
Advanced Features
5 Press and hold the PTT button to talk. Release the
PTT button to listen.
6 Press
or Menu Select button directly below
PHON to exit.
Selective Call (ASTRO Conventional Only)
56
This feature allows you to receive a call from or to call
a specific individual. It is intended to provide privacy
English
Note:
If you press PTT button before pressing the
Menu Select button directly below CALL,
your conversation is heard by all members
of the talk group.
af
4 Press the
button or the PTT button on the
keypad microphone to make the call.
If 20 seconds pass before you press the
Menu Select button directly below the
CALL, you are not responding privately to
the call just received. Instead, you initiate a
Making a Selective Call
To access this feature via a preprogrammed
button, press the preprogrammed Quick
Access (One-Touch) Selective Call button to
dial the preprogrammed ID. Proceed to step 4.
To access this feature via the menu, proceed
to the next step.
Dr
•
•
or to the required ID.
Use the keypad to enter the required ID.
4 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
1 Perform one of the following actions:
•
•
Advanced Features
Selective Call. See Making a Selective Call
on page 57.
6 Release the PTT button to listen.
7 Press
to return to the Home screen.
If you do not press
button to hang up, your
radio will remain in Selective Call state with the
other unit. You will miss all subfleet traffic and
incoming phone calls.
af
or to CALL, and press the Menu Select button
directly below CALL.
The display shows the last transmitted or received
ID.
5 Press and hold the PTT button to start the
Selective Call.
The display shows the ID of the target radio.
•
•
Press the Menu Select button directly below
CNTS to scroll through and select the required
ID.
Press the Menu Select button directly below
LIST to go to the last number dialed.
Talkgroup Call Feature (Conventional Operation Only)
3 To select the required ID, perform one of the
following actions:
This feature allows you to define a group of
conventional system users so that they can share the
use of a conventional channel.
57
English
Note:
Encryption keys are associated to talkgroups.
When talkgroups are associated, encryption
keys are changed by changing the active
talkgroup. See Secure Operations on page
95 for more information.
Dr
or to TGRP and press the Menu Select button
directly below TGRP.
The display shows the last Talkgroup that was
selected and stored.
or to PSET for the preset preprogrammed
Talkgroup.
or to the required Talkgroup.
3 Press the Menu Select button directly below SEL
to save the currently selected Talkgroup and
return to the Home screen.
If the encryption key associated to the new
Talkgroup is erased, you hear a momentary key
fail tone and the display shows KEY FAIL.
58
English
Each status can have up to a 14-character name. A
maximum of eight status conditions is possible.
Note:
The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the
radio is left idle and the timer expires. You will
hear the Menu Inactive Exit Tone upon feature
exit.
Advanced Features
•
to return to the Home screen.
This feature allows you to send data calls to the
dispatcher about a predefined status.
af
2 Perform one of the following actions:
•
4 Press
Sending a Status Call
Selecting a Talkgroup
If the encryption key that is associated to the new
Talkgroup is not allowed, you hear a momentary
key fail tone and the display shows ILLEGAL KEY.
1 Perform one of the following actions:
•
•
Press the preprogrammed Status button.
or to STS and press the Menu Select button
directly below STS.
The display shows the last acknowledged status
call, or the first status in the list.
•
•
Advanced Features
typically used during special operations and is
enabled by a qualified radio technician.
2 Perform one of the following actions:
or to the required status.
Use the keypad to enter a number
corresponding to the location in the status list.
You will not notice whether your radio has this feature
enabled until a dynamic regrouping command is sent
by the dispatcher.
Dr
3 Press the PTT button to send the status.
When the dispatcher acknowledges, you hear four
tones and the display shows ACK RECEIVED . The
radio returns to normal dispatch operation.
If no acknowledgment is received, you hear a lowpitched tone and the display shows NO
ACKNOWLEDGE.
Note:
If you try to access a zone or channel that has
been reserved by the dispatcher as a
dynamically regrouped mode for other users,
you hear an invalid tone.
af
When your radio is dynamically regrouped, it
automatically switches to the dynamically regrouped
channel. You hear a Gurgle tone and the display
shows the dynamically regrouped channel’s name.
Responding to the Dynamic Regrouping Feature
(Trunking Only)
This feature allows the dispatcher to temporarily
reassign selected radios to a particular channel where
they can communicate with each other. This feature is
Press the PTT button to talk. Release PTT button
to listen.
4 Press
to return to the Home screen.
No traffic is heard on trunked channels while
Status Calls is selected. If the radio detects no
Status Call activity for six seconds, an alert tone
or the PTT button.
sounds until you press
When the dispatcher cancels dynamic regrouping, the
radio automatically returns to the zone and channel
that you were using before the radio was dynamically
regrouped.
Requesting a Reprogram (Trunking Only)
This feature allows you to notify the dispatcher when
you want a new dynamic regrouping assignment.
59
English
Perform one of the following actions:
•
Press the preprogrammed Reprogram
Request button to send reprogram request to
the dispatcher.
•
or to RPGM then press the Menu Select
button directly below RPGM to send reprogram
request to the dispatcher.
Select
Enabled
Select-enabled radios are free to
change to any available channel,
including the dynamic-regrouping
channel, once the user has selected
the dynamic-regrouping position.
Select
Disabled
Select-disabled radios cannot change
channels while dynamically regrouped.
The dispatcher has forced the radio to
remain on the dynamic-regrouping
channel.
Dr
The display shows REPROGRAM RQST and PLEASE
WAIT.
The Scan or Private Call feature cannot be selected
while your radio is Select Disabled.
Dynamic Zone Programming (DZP)
Advanced Features
If the dispatcher does not acknowledge the
reprogram request within six seconds, you hear a
low-pitched alert tone and the display shows NO
ACKNOWLEDGE. Try again or press
to cancel and
return to the Home screen.
Classification of Regrouped Radios
The dispatcher can classify regrouped radios into
either of two categories:
60
English
Note:
Your radio must be preprogrammed to allow
you to use this feature. This feature works on
the condition at least one zone in the radio
must be a non-dynamic zone.
af
If you hear five beeps, the dispatcher has
acknowledged the reprogram request. The display
shows ACK RECEIVED and the radio returns to the
Home screen.
This feature provides one or more Dynamic Zones to
store frequently used channels be it conventional or
trunking. These dynamic channels are saved from
pre-existing (non-dynamic) channels in the radio. This
saves the time and effort from the regular navigation
Saving a Channel in the Dynamic Zone from List
Selection
Entering the Dynamic Zone to Select a Dynamic
Channel
The radio must be in Dynamic Zone in order to
perform this operation.
or to Zone then press the Menu Select button
directly below Zone.
The display shows the Zone screen.
Dr
or to <# Dynamic Zone Channels>
3 Perform one of the following actions:
Press the Menu Select button below Sel to
select.
•
Press the Menu Select button below Exit to
exit.
or to ZnPr. Press the Menu Select button
directly below ZnPr to enter Program Zone
screen.
2 Press the Menu Select button directly below
Edit.
The display shows Search Options screen.
or to List Selection. Press the Menu Select
button directly below SEL.
The display shows Select Zone screen.
af
•
Advanced Features
around the working zones and channels. User can
also delete or update the list in the Dynamic Zone.
If you have selected Exit without selecting any
Dynamic Zone Channels list, the display returns to
Home screen without any changes.
or to the required zone. Press the Menu Select
button directly below SEL.
The display shows Select Chan screen.
If you have selected one of the Dynamic Zone
Channels list, the display returns to Home screen
with the selected <# Dynamic Zone Channels>
shown on the screen.
or to the required channel. Press the Menu
Select button directly below SEL.
The display shows Channel updated.
61
English
6 Press the Menu Select button directly below Exit
to return to Home screen.
Deleting a Channel in the Dynamic Zone
The radio must be in Dynamic Zone in order to
perform this operation.
Dr
or to ZnPr then press the Menu Select button
directly below ZnPr to enter Program Zone
screen.
The display shows the dynamic channels list.
This feature allows your transceiver to control a
combination of up to four O5 control heads on APX
Mobile (depending on the model). You can use the
CAN cables to connect in any configuration that does
not exceed 131 feet (40 meters) in combined length.
Refer the Control Head Installation Manual
(6878215A01) for further information.
The Multiple Control Head (MCH) feature consists of
2 modes that can be programmed via Customer
Programming Software (CPS):
•
•
All Active mode
One Active mode
Advanced Features
3 Press the Menu Select button below Exit to
return to Home screen.
The Home screen shows .
If the channel deleted is the Home channel, the
Home screen shows +”Blank”.
62
English
Note:
If two or more control heads are connected to
the system before enabling the MCH feature in
the CPS, the radio displays EXTRA CH or CH
ID # ERR. Both errors are FATAL.
af
or to the saved dynamic channel then press the
Menu Select button directly below Del.
The display shows Channel deleted screen.
Multiple Control Head Features
Setting the ID of the Initial Control Head
This feature allows you to setup the control head in
the Front Panel Programming (FPP) mode. During
the setup, the control heads are defined as Control
1 Power off the radio by pressing the Power button.
with each other. When you activate a feature on one
control head, the rest of the control heads have the
same activated features and indicators on their
respective display.
Note:
The multiple control head feature allows only
control heads of the same type to be
connected. Upon power up, if a control head
of a different type is connected to the radio,
the display of all the attached control heads
shows the FATAL error CH MISMATCH.
2 Press and hold the left-most Menu Select button
and the emergency button simultaneously.
Dr
3 While continuing to depress these two buttons,
press the Power button to power on the radio and
the control head.
The radio and the control head powers on into
FPP mode. The display shows the ID number of
the control head.
Advanced Features
Head Number 1, Control Head Number 2, Control
Head Number 3 and Control Head Number 4.
Activating and Deactivating Intercom in All Active
Mode
af
This feature only applies to control heads in the All
Active mode.
5 Press the Power button to power off the radio and
exit FPP mode.
The intercom feature allows one control head user to
talk to another control head user in a Multiple Control
Head configuration. At any given time, when a control
head being operated has priority for the intercom call,
all other control heads are blocked until the active
control head releases PTT button. This can be made
on any attached control head.
6 Repeat step1 to step 5 to set the ID number for
the rest of the attached control heads.
All Active Mode
The All Active mode enables all connected control
heads attached to the radio to operate concurrently
4 Turn the Mode knob to change the ID number of
the control head.
63
English
Note:
In the One Active mode, if more than 2 control
heads are present upon power up, the radio
shows a FATAL error EXTRA CH on the display
of all attached control heads.
1 Press the Menu Select button directly below INTC
to activate the intercom feature of any of the
control heads.
Dr
2 Press the PTT button to initiate an intercom
transmission.
All control heads that are attached will receive the
same intercom call. The display of the control
heads receiving the intercom call shows the
alias/ID number of the transmitting control head.
3 Press
or the Menu Select button directly below
EXIT to deactivate the intercom feature.
The Volume knob, DIM button, Front/Rear (F/R)
softkey and Emergency button remain active on the
inactive control head, while all other controls are
disabled. Emergency footswitch and VIP inputs
remain active on the inactive control head. The VIP
input control head is configurable in the CPS and VIP
should be attached to the control head selected in the
CPS.
Advanced Features
One Active Mode
The One Active mode enables only one control head
to be visibly active at a time in a 2 control head
system.
64
English
Note:
Only 2 control heads are supported in the one
active mode.
af
The intercom feature also deactivates when user
initiates a mode change. If the radio is on an
emergency channel, pressing of the EMERGENCY
button or the emergency footswitch button on any
control head also deactivates the intercom feature.
The active control head commands the system
normally while the inactive control head is in remote
mode with its display shows REMOTE.
Advanced Features
Contacts
Z1
ZONE CHAN
PWR
SQL
Dr
REMOTE
F/R
Transceiver
Active Radio
Non-Active Radio
Contact entries are alphabetically sorted according to
entry alias. Each alias can have up to five IDs of
different call types associated with it.
Additionally, each entry, depending on context
(conventional, trunking, or phone), associates with
one or more of the four types of calls: Phone Call,
Selective Call, Private Call, or Call Alert.
Each entry within Contacts contains the following
information:
af
This feature provides “address-book” capabilities on
your radio. Each entry corresponds to an alias (name)
or ID (number) that you use to initiate a call.
Call Alias (Name)
Call ID (Number)
Call Type (Icon)
WACN ID (Astro 25 Trunking IDs only)
System ID
You can change the command between the 2 control
heads by pressing the Menu Select button directly
below F/R, or the Menu Select button
preprogrammed user button on the keypad
microphone.
•
•
•
•
•
Note:
Your radio must be preprogrammed to allow
you to add, edit, or delete the contact entries.
65
English
Your radio also supports a maximum of 50 call lists.
Each list can store up to 100 IDs (numbers).
Note:
Your radio is preprogrammed with a number of
contacts per Call Lists. Check with your dealer
or system administrator for more information.
Dr
The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the
radio is left idle and the timer expires. You
hear the Menu Inactive Exit Tone upon feature
exit.
Making a Private Call from Contacts
or to CNTS and press the Menu Select button
directly below CNTS.
The entries are alphabetically sorted.
or to the required subscriber alias.
3 Perform one of the following actions:
•
66
English
or to CALL and press the Menu Select button
directly below SEL.
or to select the call type.
6 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
7 Press the PTT button to initiate the call.
During the call, the display shows the subscriber
alias.
Press the Menu Select button directly below
OPTN and proceed to the next step.
8 Press and hold the PTT button to talk. Release the
PTT button to listen.
The LED lights up solid red when the PTT button
is pressed.
Advanced Features
Press the Menu Select button directly below
CNTS and proceed to step 6.
af
Your radio must be preprogrammed to allow you to
use this feature.
•
If there is no voice activity for a preprogrammed
period of time, the call ends.
If the call reaches the maximum ring time, the call
ends.
1
or to CNTS and press the Menu Select button
directly below CNTS.
or to the required channel and press the Menu
Select button directly below OK.
or to NUMBER 1 and press the Menu Select
button directly below EDIT.
The display shows NUMBER 1 and a blinking cursor
appears.
The entries are alphabetically sorted.
or to [NEW CONTACT] and press the Menu
Select button directly below SEL.
The display shows NAME.
Dr
3 Press the Menu Select button directly below
EDIT.
9 Use the keypad to enter the number and press
the Menu Select button directly below OK once
you have entered the number.
To cancel this operation, press the Menu Select
button directly below CNCL to return to the previous
screen.
af
4 Use the keypad to enter the name and press the
Menu Select button directly below OK once you
have entered the name.
Advanced Features
Adding a New Contact Entry
or to [ADD NUMBER] and press the Menu
Select button directly below SEL.
The display shows TYPE 1 .
6 Press the Menu Select button directly below
EDIT.
10 Press the Menu Select button directly below DONE
once you have finished.
The display shows  STORED, confirming
that the contact entry has been added.
To cancel this operation, press the Menu Select
button directly below CNCL to return to the previous
screen.
The radio returns to the main Contacts screen.
Deleting a Contact Entry
or to CNTS and press the Menu Select button
directly below CNTS.
67
English
The entries are alphabetically sorted.
or to the entry you want to delete and press the
Menu Select button directly below OPTN.
or to DEL and press the Menu Select button
directly below SEL.
The display shows  CONFIRM DEL?.
4 Perform one of the following actions:
Dr
4 Select the Menu Select button directly below YES
to delete the entry, or NO to cancel and return to
the main screen of Contacts.
The display shows  DELETED and the
radio returns to the main screen of Contacts.
or to CNTS and press the Menu Select button
directly below CNTS.
The entries are alphabetically sorted.
or until the display shows [AVAILABLE] and
press the Menu Select button directly below
ADD to add as a new entry.
•
or until the display shows  and its
associated number and press the Menu Select
button directly below RPLC to replace the
existing entry.
The display shows  ADDED, confirming
the addition of the contact to the list.
The radio returns to the main display of Contacts.
Methods of Contact Editing in a Call List
Advanced Features
•
af
Adding a Contact to a Call List
or to ADD TO CALLLST or ADD TO PHONLST
and press the Menu Select button directly below
SEL.
Editing an Entry Alias
or to the entry you want to add and press the
Menu Select button directly below OPTN.
or to CNTS and press the Menu Select button
directly below CNTS.
The entries are alphabetically sorted.
68
English
or to the entry you want to edit and press the
Menu Select button directly below OPTN.
or to the entry you want to edit and press the
Menu Select button directly below OPTN.
or to EDIT and press the Menu Select button
directly below SEL.
or to EDIT and press the Menu Select button
directly below SEL.
or to the entry alias you wish to change and
press the Menu Select button directly below EDIT.
A blinking cursor appears.
or to the entry ID you wish to change and press
the Menu Select button directly below EDIT.
A blinking cursor appears.
Dr
5 Use the keypad to edit the number and press the
Menu Select button directly below OK once you
have finished.
The display returns to the Edit Contact screen.
6 Press the Menu Select button directly below DONE
to save your changes and return to the main
screen of Contacts.
6 Press the Menu Select button directly below DONE
to save your changes and return to the main
screen of Contacts.
Editing as Entry ID
or to CNTS and press the Menu Select button
directly below CNTS.
The entries are alphabetically sorted.
af
5 Use the keypad to edit the name and press the
Menu Select button directly below OK once you
have finished.
The display returns to the Edit Contact screen.
Advanced Features
Editing a Call Type
or to CNTS and press the Menu Select button
directly below CNTS.
The entries are alphabetically sorted.
69
English
2
or to the entry you want to edit and press the
Menu Select button directly below OPTN.
or to EDIT and press the Menu Select button
directly below SEL.
or to TYPE and press the Menu Select button
directly below EDIT.
Dr
or to choose from the list of call types given and
press the Menu Select button directly below OK.
The display returns to the Edit Contact screen.
Advanced Features
Trunking Priority Monitor Scan List
Conventional Scan List
Talkgroup Scan List
A maximum of 200 Scan Lists can be programmed in
your radio. These lists must be preprogrammed by a
qualified radio technician.
Viewing a Scan List
or to SCNL and press the Menu Select button
directly below SCNL.
or to view the members on the list.
af
6 Press the Menu Select button directly below DONE
to save your changes and return to the main
screen of Contacts.
•
•
•
3 Press
to exit the current display and return to
the Home screen.
Editing the Scan List
Scan lists are created and assigned to individual
channels/ groups. Your radio scans for voice activity
by cycling through the channel/group sequence
specified in the scan list for the current channel/
group.
70
Your radio supports different types of Scan Lists:
English
This feature lets you change scan list members and
priorities.
Scan Lists
or to SCNL and press the Menu Select button
directly below SCNL.
The display shows the lists that can be changed.
See Viewing and Changing the Priority Status on
page 72 for more information on how to add and/or
change the priority of the currently displayed channel
in the scan list.
or to the entry you want to edit.
3 Perform one of the following actions:
•
•
Press the Menu Select button directly below
SEL to add and/or change the priority of the
currently displayed channel in the scan list.
Press the Menu Select button directly below
DEL to delete the currently displayed channel
from the scan list.
Press the Menu Select button directly below
RCL to view the next member of the scan list.
Dr
•
•
1 Long press the preprogrammed Scan side button.
or to the member you want to edit.
3 Perform one of the following actions:
•
•
or to the desired channel.
Use the keypad to enter the desired channel
name.
Use the Mode Knob to select the channel.
5 Press
to exit scan list programming and return
to the Home screen.
Press the Select button once to add the
currently displayed channel to the scan list.
Press the Select button one or more times to
change the scan list status icon of the currently
displayed channel.
4 Perform one of the following actions:
•
Changing the Scan List Status
af
4 Perform one of the following actions to select
another channel that needs to be added or deleted
then repeat step 3. Otherwise, proceed to the next
step.
•
Advanced Features
•
•
or to select more list members whose scan
status you want to change.
Use the Mode Knob to select another scan list
member.
5 Press
to exit scan list programming and return
to the Home screen.
71
English
•
Viewing and Changing the Priority Status
Perform one of the following actions:
•
•
Press the Menu Select button directly below
SEL one or more times to change the priority
status of the current displayed channel.
Press the Select button one or more times to
toggle between different status of the Scan List
status icon of the current displayed channel.
Dr
The radio shows one of following priority status
icons and scenarios:
•
Advanced Features
72
English
This feature allows you to monitor traffic on different
channels by scanning a preprogrammed list of
channels.
Turning Scan On or Off
Perform one of the following actions:
•
Press the preprogrammed Scan button to
initiate or stop scan.
•
or to SCAN and press the Menu Select
button directly below SCAN.
If the scan is enabled, the display shows SCAN ON
and the scan status icon.
•
Scan
af
•
A Scan icon indicates that the current channel
is in the scan list as a non-priority channel. The
LED lights up solid green.
A Priority-Two Channel Scan icon indicates
that the current channel is in the scan list as
the Priority-Two channel. The LED blinks
green.
A Priority-One Channel Scan icon indicates
that the current channel is in the scan list as
the Priority-One channel. The LED rapidly
blinks green. You hear all traffic on the PriorityOne channel, regardless of traffic on nonpriority channels.
No icon indicates that the current channel is
deleted from the scan list.
If the scan is disabled, the display shows SCAN
OFF.
The radio returns to the Home screen.
You can still receive fleetwide, system-wide, dynamic
regrouping, incoming telephone interconnect and
Private Conversation/Call Alert calls while scanning
for activity.
Dr
You may respond to these types of calls as you would
normally on the selected channel. However, when
scanning different channels while in talkgroup scan,
incoming Private Conversation/Call Alert calls may be
missed.
The brief MONITOR ON display indicates that the radio
is disregarding the squelch code.
To transmit on the selected channel if another
channel is active, first turn scan off by pressing the
Menu Select button below SCAN momentarily.
Transmitting Using Radio Programmed for NonTalkback Scan
Press the PTT button at any time to transmit on
the selected channel or fixed channel.
To make a Call Alert page, or Private
Conversation call while scanning, press either the
Menu Select button directly below PAGE or CALL.
The call is entered on the selected channel and
scanning is halted until the call is exited by
pressing
or pressing the Menu Select button
below either PAGE or CALL.
Transmitting Using Radio Programmed for
Talkback Scan
Press the PTT button to transmit on the channel
indicated by the display.
The radio does not begin scanning again for a
predetermined hang time after you release the
Transmitting While the Scan is On
PTT button, allowing the other party to respond. If
the other party responds within the hang time,
scanning does not resume until the full hang time
expires after they have finished speaking, allowing
the conversation to be completed.
af
or to MON and press the Menu Select button
directly below MON.
Advanced Features
Turning Scan On While Disregarding the Squelch Code
(Conventional Channels Only)
Deleting a Nuisance Channel
If a channel continually generates unwanted calls or
noise (termed a “nuisance” channel), you can
73
English
temporarily remove the unwanted channel from the
scan list.
This capability does not apply to priority channels or
the designated transmit channel.
When the radio is locked onto the channel to be
deleted, or to NUIS and press the Menu Select
button directly below NUIS.
Restoring a Nuisance Channel
Dr
The radio continues scanning the remaining channels
in the list.
•
Stop and restart a scan.
Mode change to another channel and back to
the original channel.
Turn off the radio and then turn it on again.
Nuisance mode delete can be disabled by the
system administrator.
74
English
This change remains in effect until scan is turned off.
Scan then reverts to the preprogrammed (original)
setting.
1 Press the Menu Select button directly below DYNP
to change the priority of a non-priority channel in
the scan list to Priority-Two.
2 Press
momentarily to exit the scan list and
resume scanning.
Restoring Priorities in a Scan List
To restore the original channel priorities in a scan
list, perform one of the following actions:
Advanced Features
•
•
While the radio is scanning, the dynamic priority
change feature allows you to temporarily change any
channel in a scan list (except for the Priority-One
channel) to the Priority-Two channel.
af
To restore the deleted nuisance channel, perform
one of the following actions:
Changing Priorities Status While Scan is On
•
•
•
Turn scan off, and then on.
Change channels.
Turn off the radio, and then turn it back on.
Dr
To temporarily suspend Scan Mode operation,
remove the control head from the Hang Up Box
(HUB).
You are allowed to use the control head while
scan is suspended. However, Priority Member
scanning is not suspended. This feature applies to
all Scan Lists and Scan Types. Scan is resumed
once the control head is returned to the holding
clip and the preprogrammed hang time has
elapsed.
them an individual Call Alert page. You can also verify
if a radio is active on the system.
Depending on how your radio is programmed, when
you make an Enhanced Private Call, the radio either
automatically sends a call alert page if there is no
answer after the maximum ring time, or when you
press the PTT button.
Note:
This feature must be preprogrammed by a
qualified radio technician.
Receiving a Call Alert Page
When you receive a Call Alert page, you hear four
repeating alert tones and the LED blinks green. If Call
Alert Tone Auto Reset is enabled, you hear one alert
tone and the LED blinks green. The call received
icons blinks and the display shows PAGE RECEIVED.
Call Alert Paging
This feature allows your radio to work like a pager.
Even if other users are away from their radios, or if
they are unable to hear their radios, you can send
af
Note:
Priority Scan List members are
continuously scanned only when the Scan
List, Designated Tx Member field is set to
“Talkback” in the radio programming.
Otherwise, all scan mode operation is
suspended.
Advanced Features
Using the Hang Up Box (HUB)
Press the PTT button to answer or press any
button to clear the Call Alert page.
See Making a Talkgroup Call on page 51 or Making a
Private Call (Trunking Only) on page 52 for more
information on returning the call.
75
English
shows ACK RECEIVED. The radio returns to the
Home screen.
Sending a Call Alert Page
The following methods are options on how to send a
call alert page. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
The display shows PAGING... or
.
If the call alert page is sent successfully, you
hear four high-pitched tones and the display
76
English
Sending a call alert page via the radio menu PAGE:
a)
or to PAGE.
b) Press the Menu Select button directly below
PAGE.
c) or to select the required ID.
d) Press the PTT button to send the page.
The display shows PAGING... or
.
Advanced Features
Sending a call alert page via the preprogrammed
Quick Access (One-Touch) Call Alert Paging
button:
a) Press the preprogrammed Quick Access
(One-Touch) Call Alert Paging button to send
a page to the preprogrammed ID.
•
af
•
Dr
Note:
If the feature inactivity timer is enabled, your
radio automatically exits the feature when your
radio is left idle long enough for the time to
expire. You hear the Menu Inactive Exit Tone
upon feature exit.
If the call alert page is not acknowledged, you
hear a low tone and the display shows NO
ACKNOWLEDGE. Press the Menu Select button
directly below OK to return to the main screen
for Contacts.
If the call alert page is sent successfully, you
hear four high-pitched tones and the display
shows ACK RECEIVED. The radio returns to the
Home screen.
If the call alert page is not acknowledged, you
hear a low tone and the display shows NO
ACKNOWLEDGE. Press the Menu Select button
•
ACKNOWLEDGE. Press the Menu Select button
directly below OK to return to the main screen of
Contacts.
Sending a call alert page via the radio menu CALL:
a)
Dr
or to CALL.
b) Press the Menu Select button directly below
CALL.
c) or to select the alias or ID, and press the
PTT button to initiate the call.
If the target radio does not respond after a
preprogrammed period of time, the display
shows SEND PAGE?.
d) To send the call alert page, press the Menu
Select button directly below YES. To exit the
screen without sending the call alert page,
press the Menu Select button directly below
NO.
The display shows PAGING....
Advanced Features
directly below OK to return to the main screen of
Contacts.
Enabling and Disabling In-Call User Alert
Make sure you are in Home mode where the default
zone and mode are being displayed.
You can enable and disable voice transmission, if
needed.
or to scroll to the VMUT and press the Menu
Select button directly below VMUT.
Voice mute is activated.
af
If the call alert page is not acknowledged, you
hear a low tone and the display shows NO
Pressing the Menu Select button directly below
VMUT or the VMut programmed button momentarily
toggles between Voice mute on and Voice mute
off. VOICE MUTE ON shown on the display
indicates that the radio is muted to all conventional
dispatch calls and affiliated trunking group calls.
If the call alert page is sent successfully, you
hear four high-pitched tones and the display
shows ACK RECEIVED. The radio returns to the
Home screen.
2 To turn the feature off, press the Menu Select
button directly below VMUT or the VMut
preprogrammed button again.
77
English
Quick Call II (ASTRO P25 Digital Trunking and
Conventional)
This feature allows the user to broadcast a series of
distinct, recognizable tones before a voice
transmission from the dispatcher or a radio.
Dr
The broadcasting dispatcher or radio user can select
this alert tone transmission to be sent to an individual
Talkgroup or over the entire system. Specific tone or
series of tones are pre-programmed into the radios to
allow the dispatcher or supervisor to select a list of
tones to broadcast before they make their voice
transmission. Each tone is distinctive to indicate
different situation or different broadcaster. The
transmitting radio also plays back the tones for the
broadcaster to listen.
Initiating a Quick Call II Transmission
The broadcasting or transmitting radio must be preprogrammed to see the tone in the Quick Call II tone
list. The receiving radio must also be preprogrammed to decode the tone to broadcast.
or to QCII, and press the Menu Select button
directly below QCII.
or to select the tone to broadcast.
Note:
The receiving radios must be configured with
the Quick Call II tone in order for the radio to
sound the selected tone and also to sound a
preconfigured alert tone after the selected
tone has sound.
78
English
4 Release PTT to listen.
Advanced Features
af
3 Press the PTT to broadcast the selected tone, or
press and hold the PTT to broadcast the selected
tone and transmit with your vocal transmission.
You hear the radio sounds the selected tone. You
can begin your call after the tone ends.
Emergency Operation
The Emergency feature is used to indicate a critical
situation.
Your radio supports the following Emergency modes:
Emergency Alarm
Emergency Call (Trunking Only)
Emergency Alarm with Emergency Call
Silent Emergency Alarm
Special Considerations for Emergencies
Sending an Emergency Alarm
This feature allows you to send a data transmission,
which identifies the radio sending the emergency, to
the dispatcher.
1 Press the preprogrammed Emergency button.
Dr
•
•
•
•
•
Advanced Features
If the Orange button is preprogrammed to send an
emergency signal, this signal overrides any other
communication over the selected channel.
Check with your dealer or system administrator for
more information on the programming of this feature.
af
Only one of the Emergency modes above can be
assigned to the preprogrammed Emergency button
or the Emergency footswitch.
A tone sounds and the display alternates
EMERGENCY and the home display. A dispatcher
acknowledgment ACK RECEIVED display follows.
For trunking system, the radio also sounds a highpitched tone that indicates the alarm has been
received by the trunked system’s central
controller.
Sending an Emergency Call (Trunking Only)
Note:
To exit emergency at any time, press and hold
the preprogrammed Emergency button for
about a second. This timer is programmable
from 0 – 6250 milliseconds by a qualified
technician.
2 Press and hold the EMERGENCY button or the
PTT button to return to normal operation.
This feature gives your radio priority access to a
talkgroup.
1 Press the preprogrammed Emergency button.
One of the following scenarios occurs:
•
A tone sounds and the display alternates
EMERGENCY and the home display.
79
English
•
You hear the radio sounds a short low-pitched
tone to indicate the selected channel does not
support emergency and rejects to launch
emergency mode.
2 Hold the microphone vertically 1 to 2 inches (2.0 to
2.5 cm) from your mouth.
3 Press and hold the PTT button. Speak clearly into
the microphone.
Dr
4 Release the PTT button to end the transmission
and wait for a response from the dispatcher.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press and hold the PTT button. Speak clearly into
the microphone.
4 Release the PTT button to end the transmission
and wait for a response from the dispatcher.
Sending an Emergency Alarm with Emergency Call
This feature gives your radio priority access on a
channel for conventional system, and to a talkgroup
for trunking system.
If the radio has both emergency call and alarm
features enabled, it automatically proceeds to the call
mode after the alarm is acknowledged.
80
1 Press the preprogrammed Emergency button.
English
5 To exit Emergency Call, press and hold the
preprogrammed Emergency button for about a
second.
Turning off the radio also cancels the emergency
state.
Advanced Features
af
5 To exit Emergency Call, press and hold the
preprogrammed Emergency button for about a
second.
The display alternates EMERGENCY and the home
display. A high-pitched tone sounds, indicating
that the trunked system central controller has
received the alarm. A dispatcher acknowledgment
(four high-pitched tones) follows, accompanied by
an ACK RECEIVED display.
Sending a Silent Emergency Alarm
This feature allows you to send an Emergency Alarm
to the system without triggering any audio or visual
indicators.
Note:
If you press the PTT button during hot mic,
and continue to press it after the hot mic
duration expires, the radio continues to
transmit until you release the PTT button.
Dr
1 Press the preprogrammed Emergency button.
The display shows no changes, the LED does not
light up, and you hear no tones. The silent
emergency state continues until you perform the
next step.
•
•
•
Advanced Features
This activated microphone state is also known as “hot
mic”.
If the unit is out of the range of the system and/or
the emergency alarm is not acknowledged, a tone
sounds and the display shows NO ACKNOWLEDGE.
If you press the emergency button, then change to
a mode that has no emergency capability, the
display shows NO EMERGENCY and a continuous
low-pitched tone sounds until a valid emergency
mode is selected or until the emergency is
cancelled.
When an emergency is active, changing to
another mode where emergency is enabled
(trunked or conventional) causes an emergency
alarm and/or emergency call to be active on the
new mode.
af
Special Considerations for Emergencies
•
If you press the emergency button while in a
channel that has no emergency capability, a lowpitched tone sounds.
Automatic Registration Service (ARS)
This feature provides an automated data application
registration for the radio. When you turn on the radio,
the device automatically registers with the server.
2 Press and hold the emergency button until a tone
sounds to exit the silent alarm mode.
If silent emergency alarm is used with emergency
call, pressing the PTT button exits the silent mode
and initiates the emergency call.
Data applications within the fixed network can
determine the presence of a device on the system
and send data to the device. For example: Text
Messaging Service (TMS).
81
English
One of the following scenarios occur:
The Automatic Registration Service for the radio
consists of two (2) modes:
•
•
•
ARS Server Mode (default mode)
ARS Non-Server Mode
•
Note:
The default ARS mode can be changed by a
qualified radio technician using the radio’s
programming software.
•
Dr
Selecting or Changing the ARS Mode
82
English
•
Selecting the ARS mode via the Mode Knob:
a) After the zone you want is displayed, toggle
until the display shows the required channel.
The display shows the current zone is not
blinking, and the channel is blinking.
b) or or press the Mode Knob once and rotate
the Mode Knob to the desired channel.
One of the following scenarios occur:
Selecting or Changing the ARS mode via the radio
menu:
a) Press and hold or to CHAN.
b) Press the Menu Select button directly below
CHAN.
The display shows the current zone is not
blinking, and the channel is blinking.
c) or or press the Mode Knob once and rotate
the Mode Knob to the desired channel.
Advanced Features
•
d) Press
to confirm the displayed zone and
channel.
af
The following methods are options on how to select or
change the ARS Mode. The result of all the methods
is the same. You can use the options interchangeably
depending on your preference and the programmed
functions.
In ARS Server Mode, the display shows the
User Login Indicator icon, the zone, and
ARS server channel.
In ARS Non-Server Mode, the display
shows the User Login Indicator icon, the
zone, and ARS non-server channel.
If the channel or mode selected is
unprogrammed, the display shows
UNPROGRAMMED. Repeat this step.
•
In ARS Server Mode, the display shows the
User Login Indicator icon, the zone, and
ARS server channel.
•
The maximum length for a username is eight
(8) characters. Usernames are not case
sensitive in server mode but are case
sensitive in non-server mode.
In ARS Non-Server Mode, the display
shows the User Login Indicator icon, the
zone, and ARS non-server channel.
If the channel or mode selected is
unprogrammed, the display shows
UNPROGRAMMED. Repeat this step.
A predefined username may sometimes be
invalid because the programming software
that is used to set predefined usernames
allows you to set usernames comprising of
eight (8) characters or more.
c) Press
to confirm the displayed zone and
channel.
Dr
User Login Feature
Logging In as a User
or to USER and press the Menu Select button
directly below USER.
The display shows the User Login screen.
af
This feature allows you as the user to be associated
with the radio. With this association, every data
application (Example: Text Messaging Service) takes
on a friendly username.
Note:
Valid characters for a username entry are
capital letters (A – Z), small letters (a – z),
numbers (0 – 9), symbols (*, #, -, /), and the
space character.
2 Perform one of the following actions:
•
or to [ID Entry] and press the Menu
Select button directly below Edit to enter ID. A
blinking cursor appears on the screen. Use the
keypad to type or edit a user name. Press the
Menu Select button directly below Ok to
submit.
You can still send text messages without logging in as
a user. The user login feature only enables the
recipient of your message to identify you as the
sender by assigning a username to your message.
Advanced Features
•
•
or to scroll through the list of predefined
user names. Press the Menu Select button
83
English
directly below SEL to select the predefined user
name.
•
Press and hold or to scroll through the list of
predefined user names at a fast scroll rate.
Press the Menu Select button directly below
LOGN to select the predefined user name.
Dr
If the selected predefined username has more
than eight (8) characters, or an invalid character in
it, the display momentary shows INVALID ID.
•
•
One of the following scenarios occurs:
•
•
4 Enter your Personal Identification Number (PIN)
number.
The maximum PIN length is 4 digits. The PIN
number will appear as asterisks.
•
If the user name is invalid, login fails and the user
login failure indicator (IP indicator) icon blinks. The
display also shows momentary LOGIN FAILED.
If the PIN is invalid, login fails and the user login
failure indicator (IP indicator) icon blinks. The
display also shows momentary LOGIN FAILED.
Wait for the logged in confirmation screen. If the
login process is successful, the display shows the
successful user login indicator (IP indicator) icon
and LOGGED IN, with LOGT and EXIT.
Advanced Features
•
84
English
In ARS Server Mode, the display shows the
User Login Indicator icon, the ID, and IN
PROGRESS, with CNCL.
Note:
To cancel the login process and return to the
initial user login screen, press the Menu
Select button directly below CNCL.
af
3 Press the Menu Select button directly below PIN.
A blinking cursor appears beside PIN.
5 Press the Menu Select button directly below
LOGN.
One of the following scenarios occurs:
In ARS Non-Server Mode, the display shows
the User Login Indicator icon, the ID, and
LOGGED IN, with LOGT and EXIT.
In non-ARS enabled mode, the display shows
OFFLINE, with LOGT and EXIT.
Logging Out
Once the data application registration is completed,
you can log out.
1
or to LOGT and press the Menu Select button
directly below LOGT.
•
•
•
A new text message (free form message).
A predefined message (quick text message).
An edited quick text message.
The main menu consists of the following options:
•
•
•
•
Inbox
Compose
Drafts
Sent
Dr
The display shows the User Login Indicator icon
and CLEAR PRIVATE DATA?.
2 Perform one of the following actions:
•
Select YES to clear all your private data. The
display shows momentary PRIVATE DATA
CLEARED.
Select NO to keep your private data.
af
•
This features allows you to quickly send and receive
messages and run database queries directly from
your radios. The maximum length of characters for a
text message is 200.
The types of text messages available:
Note:
See Status Icons on page 35 for more
information on the TMS icons and TMS Menu
Options on page 39 for more information on
each menu option.
Accessing the Messaging Features
1 Perform one of the following actions:
Text Messaging Service (TMS)
Advanced Features
Note:
Private data refers to all messages in the text
messaging Inbox, Draft, and Sent folder. The
next user is able to access the Inbox, Draft
and Sent messages if private data is not
deleted.
•
•
Press the Data Feature button or the
preprogrammed TMS Feature button to access
the TMS feature screen.
Press and hold the Data Feature button or the
preprogrammed TMS Feature button to access
the Inbox.
85
English
•
Follow the procedure described next to access
this feature via the radio menu.
or to TMS.
, pressing
During the numeric mode, except for
the keypad only enters the numeric digits.
Subsequent presses of the same key inserts the
same digit to the text message (no multi-tap).
3 Press the Menu Select button directly below TMS
to access the TMS feature screen.
2 Press the Menu Select button directly below TMS
to access the TMS feature screen.
or to scroll through the main menu options.
Dr
3 Press the Menu Select button directly below COMP
to see the compose options.
4 Press the Menu Select button directly below NEW
to compose a new message.
A blinking cursor appears on the COMPOSE screen.
Press the Menu Select button directly
below Back at any time to return to the
previous screen.
Composing and Sending a New Text Message
During the uppercase and lowercase mode, multitapping the keys only scrolls through the letters. For
example, A->B->C, a->b->c.
86
English
5 Use the keypad to type or edit your message.
6 Press the Menu Select button directly below OPTN
once the message is composed.
Advanced Features
af
Note:
The radio automatically exits the feature, if
the feature inactivity timer is enabled, when
the radio is left idle and the timer expires.
You will hear the Menu Inactive Exit Tone
upon feature exit.
or to TMS.
7 Perform one of the following actions:
•
or to scroll through the address list and
select the required address.
or to [OTHER RECPNT] and press the Menu
Select button below EDIT. When a blinking
cursor appears in the ENTER ADDRESS screen,
use the keypad to type the address entry.
Drafts Folder on page 93 for more
information.
Sending a Quick Text Message
Quick Text messages are messages that are
predefined and usually consist of messages that are
used most frequently.
The display shows the SEND MESSAGE screen and
SENDING MSG.
Each Quick Text message has a maximum length of
50 characters.
If the message is sent, you hear a tone and the
display shows MSG SENT.
1 Perform one of the following actions:
Dr
8 Press the Menu Select button directly below SEND
or press the PTT button to send the message.
•
af
If the message is not sent, you hear a low tone,
the display shows SEND FAILED and returns to the
main TMS screen.
You can also select the DRFT option to
save your message in the Drafts folder to
send it at a later time. See Accessing the
•
To access this feature via a preprogrammed
button, press the preprogrammed Quick Text
button and proceed to Step 4.
To access this feature via the menu, proceed
to the next step.
or to TMS and press the Menu Select button
directly below TMS to access the TMS feature
screen.
Note:
You can append a priority status and/or a
request reply to your message. See Priority
Status and Request Reply of a New Text
Message on page 88 for more
information.
Advanced Features
•
3 Perform one of the following actions:
•
Press the Menu Select button directly below
COMP to see the compose options.
87
English
•
4 Press the Menu Select button directly below LIST
to see the quick text list.
Dr
or to scroll through the list of messages and
press the Menu Select button directly below SEL
to select the required message.
The message appears on the COMPOSE screen,
with a blinking cursor at the end of it. Use the
keypad to edit the message, if required.
•
88
English
The display shows the SEND MESSAGE screen and
SENDING MSG.
If the message is sent, you hear a tone and the
display shows MSG SENT.
If the message is not sent, you hear a low tone,
the display shows SEND FAILED and returns to the
main TMS screen.
or to scroll through the address list and
select the required address.
or to [OTHER RECPNT] and press the Menu
Select button below EDIT. When a blinking
Note:
You can append a priority status and/or a
request reply to your message. See Priority
Status and Request Reply of a New Text
Message on page 88 for more
information.
Advanced Features
7 Press the Menu Select button directly below
SEND.
8 Perform one of the following actions:
9 Press the Menu Select button directly below SEND
or press the PTT button to send the message.
af
6 Press the Menu Select button directly below
OPTN.
•
cursor appears on the ENTER ADDRESS screen.
Use the keypad to type the address entry.
Press the Menu Select button directly below
EXIT to return to the Home screen.
Priority Status and Request Reply of a New Text
Message
Before sending your message, you can append a
priority status and/or a request reply to your message.
Ensure that an outgoing message is composed to
allow you to perform this procedure. See Composing
and Sending a New Text Message on page 86 for
more information.
Dr
Note:
The Priority Status icon on a message does
not imply that the message gets higher priority
over the other messages when it is being
transmitted. It is just an indication that can be
embedded into a message to let the receiver
know that the message is important.
and Sending a New Text Message on page 86 for
more information.
1 Press the Menu Select button directly below
OPTN.
2 Press the Menu Select button directly below IMPT
to remove the priority status icon.
The display shows the normal message icon on the
label bar.
Appending a Request Reply to a Text Message
Ensure that an outgoing message is composed to
allow you to perform this procedure. See Composing
and Sending a New Text Message on page 86 for
more information
af
1 Press the Menu Select button directly below
OPTN.
Advanced Features
Appending a Priority Status to a Text Message
2 Press the Menu Select button directly below IMPT
to indicate the message as important.
Ensure there is an outgoing message composed to
allow you to perform this procedure. See Composing
The priority status icon appears beside the normal
message icon on the label bar.
Removing a Priority Status from a Text Message
1 Press the Menu Select button directly below
OPTN.
2 Press the Menu Select button directly below RQRP
to request for a reply.
The request reply icon appears beside the normal
message icon on the label bar.
89
English
Removing a Request Reply from a Text Message
Ensure that an outgoing message is composed to
allow you to perform this procedure. See Composing
and Sending a New Text Message on page 86 for
more information.
1 Press the Menu Select button directly below
OPTN.
Dr
2 Press the Menu Select button directly below RQRP
to remove the reply status icon.
The priority status and request reply icons appear
beside the normal message icon on the label bar.
Removing a Priority Status and a Reply Request
from a Text Message
Ensure that a outgoing message is composed to
allow you to perform this procedure. See Composing
and Sending a New Text Message on page 86 for
more information.
1 Press the Menu Select button directly below
OPTN.
Ensure that an outgoing message is composed to
allow you to perform this procedure. See Composing
and Sending a New Text Message on page 86 for
more information.
1 Press the Menu Select button directly below
OPTN.
90
2 Press the Menu Select button directly below IMPT
to indicate the message as important.
English
2 Press the Menu Select button directly below IMPT
to remove the priority status icon.
3 Press the Menu Select button directly below RQRP
to remove the reply status icon.
Advanced Features
af
The display shows the normal message icon on the
label bar.
Appending a Priority Status and a Reply Request
to a Text Message
3 Press the Menu Select button directly below RQRP
to request for a reply.
The display shows the normal message icon on the
label bar.
Note:
When you receive a message that is flagged
with the “Request Reply” icon, you must
manually respond to the sender that you have
received the message. The system will not
automatically send a notification to
acknowledge that the message was received.
Dr
The following methods are options on how to receive
a text message. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
Viewing a Text Message from the Inbox
The Inbox can hold up to thirty (30) messages.
Note:
or to read the message if the content fills
more than one screen.
Receiving a text message via the Data Feature
button or the TMS Feature button:
a) When you receive a message, press and hold
the preprogrammed Data Feature button or the
TMS Feature button to access the Inbox.
The display shows a list of aliases or IDs, with
the sender of the latest received message on
top.
Receiving a text message via the radio menu:
1 Perform one of the following actions:
•
Press the preprogrammed Data Feature button
or the TMS Feature button to access the TMS
feature screen. Press the Menu Select button
directly below INBX.
Press and hold the preprogrammed Data
Feature button or the TMS Feature button to
access the Inbox.
•
a) When the new message icon appears and the
display shows momentary NEW MSG, press the
Menu Select button directly below TMS to
access the Inbox.
The display shows a list of aliases or IDs, with
the sender of the latest received message on
top.
af
•
Advanced Features
Receiving a Text Message
•
•
or to TMS and press the Menu Select button
directly below TMS to access the TMS feature
91
English
screen. Press the Menu Select button directly
below INBX.
2 Perform one of the following actions:
•
The display shows the latest received message.
2 While on the view message screen, press the
Menu Select button directly below RPLY, DEL, or
BACK to access the option.
Select RPLY to reply the message.
Select DEL to delete the message.
Select BACK to return to the previous screen.
Dr
•
•
•
Note:
The original date and time stamp, address and
message content is automatically appended to
the reply message.
1 Press the Menu Select button directly below RPLY
to reply to a message.
92
English
or to scroll through the list of predefined
messages and press the Menu Select button
directly below SEL to select the required
message.
One of the following scenarios occurs:
•
•
A blinking cursor appears on the Compose
screen.
The predefined message appears on the
Compose screen, with a blinking cursor at the
end of it.
3 Use the keypad to type or edit your message.
Advanced Features
Replying to a Received Text Message
•
af
Note:
The icon at the top right corner of the
screen indicates the status of the message.
See Text Messaging Service (TMS)
Indicators on page 38 for more information.
•
Press the Menu Select button directly below
NEW to compose a new message.
Press the Menu Select button directly below
LIST to select a predefined message.
4 Press the Menu Select button directly below OPTN
once you have completed the message.
5 Press the Menu Select button directly below SEND
to send the message.
Note:
Press the Menu Select button directly below
BACK at any time to return to the previous
screen.
Accessing the Drafts Folder
Dr
You can append a priority status and/or a
request reply to your message. See Priority
Status and Request Reply of a New Text
Message on page 88 for more information.
4 Press the Menu Select button directly below
EDIT, DEL, or BACK to access the option.
•
•
•
Select EDIT to edit the message before
sending it.
Select DEL to delete the message.
Select BACK to return to the previous screen.
Sent Text Messages
Once a message is sent to another radio, it is saved
in the Sent folder. The most recent sent text message
is always added to the top of the Sent list.
The Sent folder is capable of storing a maximum of
ten (10) last sent messages. When the folder is full,
the oldest message in the folder is deleted when the
11th message comes in.
Viewing a Sent Text Message
2 Press the Menu Select button directly below TMS
to access the TMS feature screen.
3 Press the Menu Select button below DRFT.
af
This folder stores the messages that were saved
previously. The Drafts folder can hold up to 10
messages. The oldest draft in the folder is deleted
when the 11th message comes in.
or to TMS.
Advanced Features
The display shows the Send Message screen and
SENDING MSG.
1 Perform one of the following actions:
•
Press the preprogrammed Data Feature button
or the TMS Feature button to access the TMS
feature screen.
The display shows the latest drafted text message.
93
English
•
or to TMS and press the Menu Select button
directly below TMS to access the TMS feature
screen.
2 Press the Menu Select button directly below
SEND.
3 Perform one of the following actions:
2 Press the Menu Select button below SENT.
•
or to scroll through the address list and
select the required address.
•
or to [OTHER RECPNT] and press the Menu
Select button below EDIT. When a blinking
cursor appears in the ENTER ADDRESS screen,
use the keypad to type the address entry.
The display shows the latest sent message.
Select OPTN to configure the message settings.
Select DEL to delete the message.
Select BACK to return to the previous screen.
Advanced Features
Sending a Sent Text Message
1 Press the Menu Select button directly below OPTN
while viewing the message.
English
The display shows the SEND MESSAGE screen and
SENDING MSG.
Note:
Press the Menu Select button directly
below BACK at any time to return to the
previous screen.
Note:
The icon at the top right corner of the
screen indicates the status of the message.
See Text Messaging Service (TMS)
Indicators on page 38 for more information.
94
4 Press the Menu Select button below SEND or the
PTT button to send the message.
af
•
•
•
Dr
3 While on the view message screen, press the
Menu Select button directly below OPTN, DEL or
BACK to access the option.
You can append a priority status and/or a
request reply to your message. See Priority
Status and Request Reply of a New Text
Message on page 88 for more information.
Enabling Secure Transmission
1 From the Inbox, Draft, or Sent screen, or to
scroll through the messages.
2 Press the Menu Select button directly below DEL
to view the delete options.
Press the Menu Select button directly below
CURR to delete the current message.
Press the Menu Select button directly below
ALL to delete all the messages.
or to SEC and press the Menu Select button
directly below SEC.
The display shows
and the current key if multikey has been enabled.
3 Press PTT button to transmit.
Secure radio operation provides the highest
commercially available level of voice security on both
trunked and conventional channels.
Unlike other forms of security, Motorola digital
encryption provides signaling that makes it virtually
impossible for others to decode any part of an
encrypted message.
Note:
If the selected channel is preprogrammed
for clear-only operation – when you press
the PTT button, an invalid mode tone
sounds and the display shows CLEAR TX
only.
The radio does not transmit until you
disable the secure mode.
af
Secure Operations
Dr
•
2 Monitor the mode to be sure it is not in use.
3 Perform one of the following actions:
•
Advanced Features
Deleting Text Messages
The radio can be configured to ignore the
clear voice or unsecured transmission
when the radio is in secured transmission.
Check with your agent for details.
95
English
1
Press the Menu Select button below GROUP for
multikey.
•
Accessing the Secure Feature
or to SEC.
2 Press and hold the Menu Select button directly
below SEC to display Secure feature screen.
The display shows the Secure screen.
Managing Encryption
Dr
Loading the Encryption Key(s)
Note:
Refer to the key-variable loader (KVL) manual
for equipment connections and setup.
or to the required key or group.
6 Press the Menu Select button below LOAD to load
the key to your radio.
When the key has been loaded successfully, one of
the following scenarios occurs:
•
•
You hear a short tone for single-key radios.
You hear an alternating tone for multikey radios.
Multikey Feature
af
2 Press the Menu Select button below TARGET.
3 Press the Menu Select button below LOAD.
4 Perform one of the following actions:
•
96
English
Press the Menu Select button below KEY for
single-key.
This feature allows the radio to be equipped with
different encryption keys and supports the DES-OFB
algorithm.
There are two types:
Advanced Features
1 Attach the KVL to your radio.
The display shows KEYLOADING, and all other
radio functions are locked out, except for power
down, and volume.
Conventional
Multikey
The encryption keys can be tied
(strapped), on a one-per-channel
basis, through Customer
Programming Software. In addition,
you can have operator-selectable
keys, operator-selectable keysets,
and operator-selectable key
Trunked
Multikey
4 Perform one of the following actions:
•
Press the Menu Select button directly below
SEL to save the newly selected key and return
to the Home screen.
•
Press , the PTT button, or the Menu Select
button directly below EXIT.
Turn the 16-Position Select knob to exit.
•
Note:
When the selected key is erased, you hear
a momentary keyfail tone and the display
shows KEY FAIL.
Dr
If the radio is used for both
conventional and trunked
applications, strap the encryption
keys for trunking on a per-talkgroup
or announcement-group basis. In
addition, a different key can be
strapped to other features, such as
dynamic regrouping, failsoft, or
emergency talkgroup. You can
have operator-selectable key
erasure.
or to KEY.
af
Selecting an Encryption Key
or to scroll through the encryption keys or use
the keypad to enter the number of the desired key.
When the selected key is not allowed, you
hear a momentary illegal key tone and the
display shows ILLEGAL KEY.
Selecting a Keyset
This feature allows you to select one or more groups
of several encryption keys from among the available
keys stored in the radio.
2 Press the Menu Select button directly below KEY.
The display shows the last user-selected and
stored encryption key, and the available menu
selections.
Advanced Features
erasure. If talkgroups are enabled
in conventional, then the encryption
keys are strapped to the talkgroups.
For example, you could have a group of three keys
structured to one keyset, and another group of three
different keys structured to another keyset; by
97
English
changing keysets, you would automatically switch
from one set of keys to the other.
Every channel to which one of the original keys was
tied now has the equivalent new key instead.
or to KSET and press the Menu Select button
directly below KSET.
The display shows the last user-selected and
stored keyset, and the available keyset menu
selections.
or to scroll through the keysets or use the
keypad to enter the number of the desired keyset.
Dr
Erasing the Selected Encryption Keys
This feature allows you to erase all or selected
encryption keys.
Advanced Features
3 Press the Menu Select button directly below SEL
to save the newly selected keyset.
The radio exits keyset selection and returns to the
Home screen.
Note:
Press , the PTT button, or the EXIT
menu selection to exit this menu at any
time without changing the keyset selection.
98
English
af
Erasing the selected encryption keys via the radio
menu:
a) or to ERAS and press the Menu Select
button directly below ERAS.
The display shows the last user-selected and
stored encryption key, and the available menu
selections.
b) or to the desired encryption key or use the
keypad to enter the number of the desired key.
c) Press the Menu Select button directly below
ALL to delete all keys, or press the Menu
Select button directly below SNGL to delete
current shown key.
You can abort this screen and return to Home
screen by pressing the Menu Select button
directly below ABRT.
Requesting an Over-the-Air Rekey (ASTRO
Conventional Only)
Ensure that the Unique Shadow Key (USK) is loaded
into the radio with the key-variable loader (KVL)
This feature, also known as OTAR, allows the
dispatcher to reprogram the encryption keys in the
radio remotely. The dispatcher performs the rekey
operation upon receiving a rekey request from the
user.
or to REKY.
Dr
2 Press the Menu Select button directly below
REKY.
Note:
The rekey operation failure indicates that
your radio does not contain the Unique
Shadow Key (USK).
MDC Over-the-Air Rekeying (OTAR) Page
This feature allows you to view or define MDC Overthe-Air Rekeying (OTAR) features. It is applied only
when operating in secure encrypted mode and only
for conventional communications. In additional to
Rekey Requests, OTAR transmissions include
Delayed Acknowledgements, and Power-up
Acknowledgements.
Some of the options selected may also need to be set
up at the Key Management Controller (KMC) site to
work properly.
•
Press the PTT button to send the rekey
request.
•
Press the PTT button again, or the
or
Emergency button, to exit the feature and
transmit in normal mode.
If the rekey operation fails, you hear a bad-key
tone and the display shows REKEY FAIL.
Note:
This feature must be preprogrammed by a
qualified radio technician. Check with your
dealer or system administrator for more
information.
af
3 Perform one of the following actions:
Advanced Features
before the rekey request can be sent. Refer to your
local key management supervisor for more
information.
Infinite UKEK Retention
This feature enables Unique Key Encryption Key
(UKEK) to be permanently stored in the radio even
99
English
when all of the encryption keys is erased. Without this
UKEK key, the radio cannot be rekeyed over the air.
signal at
transmitting radio.
Note:
This feature must be preprogrammed by a
qualified radio technician. Check with your
dealer or system administrator for more
information.
Hear Clear
Dr
Companding Reduces the channel noise, e.g.
OTA transmission, that is
predominantly present in UHF2 and
900 MHz channel with the following
features.
Compressor Reduces the
background noise
flow and the speech
100
English
Advanced Features
There are two components of Hear Clear.
Random FM
Noise
Canceller
(Flutter
Fighter)
af
Note:
This feature must be preprogrammed by a
qualified radio technician. Check with your
dealer or system administrator for more
information.
Expander
Expands the speech
while the noise flow
remains the same at
receiving radio.
Reduces the unwanted effects of
random FM noise pulses caused by
channel fading under high Signal-toNoise (S/N) conditions such as in a
moving transportation. The fading
effects, heard as audio pops and
clicks, are cancelled without
affecting the desired audio signal.
The Random FM Noise Canceller
operates only in receive mode.
Note:
This feature is addressed as GPS across the
manual as the naming convention of the
buttons and strings remain the same as the
legacy feature of GPS.
Dr
The availability and accuracy of this location
information (and the amount of time that it takes to
calculate it) varies depending on the environment in
which you are using the GPS feature.
•
•
•
•
•
Underground locations
Inside buildings, trains, or covered vehicles
Under any metal, or concrete roof, or structure
Between tall buildings or under dense tree-cover
In temperature extremes outside the operating
limits of your radio
Even where location information can be calculated in
such situations, it may take longer to do so, and your
location estimate may not be as accurate. Therefore,
in any emergency situation, always report your
location to your dispatcher.
af
For example, GPS location fixes are difficult to obtain
indoors, in covered locations, between high buildings,
or in situations where you have not established a
clear broad view of the sky.
The GPS technology uses radio signals from earth
orbiting satellites to establish location coordinates.
Therefore, maximizing your view of unobstructed sky
is essential for optimum performance.
Where adequate signals from multiple satellites are
not available (usually because you cannot establish a
view of a wide area of the sky), the GPS feature of
Keep in mind that the accuracy of the location
information and the time it takes to obtain it varies
depending upon circumstances, particularly the ability
to receive signals from an adequate number of
satellites.
GPS Operation
Advanced Features
your radio will not work. Such situations include but
are not limited to:
Global Positioning System / Global
Navigation Satellite System
Note:
Even where adequate signals from multiple
satellites are available, your GPS feature only
provides an approximate location, usually
within 10 meters from your actual location, but
sometimes farther away.
101
English
The satellites used by the GPS feature are controlled
by the U.S. government and are subject to changes
implemented in accordance with the Department of
Defense GPS user policy and the Federal Radio
Navigation Plan. These changes may affect the
performance of the GPS feature on your radio.
GPS Performance Enhancement
Dr
Sometimes, the GPS feature may be unable to
complete a location calculation successfully. You then
see a message indicating that your radio cannot
connect to enough visible satellites.
•
For your initial fix, hold the radio in the face
position.
Stay in the open. The GPS feature works best
where there is nothing between your radio and the
open sky.
The Outdoor Location Feature (Using GPS)
This feature allows you to determine your current
location using a location menu, as well as your
current distance and bearing in relation to another
102
English
The radio also stores four (4) preprogrammed
waypoints. These coordinates cannot be deleted.
The following table shows the differences between
programmable waypoints and preprogrammed
waypoints.
Programmable Waypoints
Preprogrammed Waypoints
User-configurable location coordinates.
Fixed location coordinates:
Advanced Features
•
Your radio stores up to a maximum of sixty (60)
programmable location coordinates, also known as
waypoints. When the memory is full, the next
waypoints automatically replaces the oldest
waypoints in the radio.
af
To maximize the ability of your radio to determine a
fix, take note of the following guidelines:
location. Radio location may be requested and
reported over-the-air.
•
•
•
•
Home
Emergency
Last Known Location
Destination
Preprogrammed Waypoints
Only the alias is editable, The Home and Destinanot the coordinates.
tion coordinates are editable.
Coordinates can be deCoordinates cannot be
leted one at a time, or all deleted.
at once.
Dr
Accessing the Outdoor Location Feature
3 Press the Menu Select button directly below On to
turn on the GPS.
The display shows PREVIOUS LOC .
or to check the longitude, time and date of the
last successful location fix.
5 To obtain a new location fix, press the Menu
Select button directly below RFSH.
The top line temporarily displays PLEASE WAIT
while the new location is being determined. While
the new location is being determined, the location
signal can be a solid or blinking icon. The location
coordinates are updated automatically every 5
seconds while the location signal is present.
or to LOC.
2 Press the Menu Select button directly below LOC.
6 To return to the Home screen, press
, the PTT
button, or the Menu Select button directly below
EXIT.
Note:
An ON radio menu may be present on the
Location menu screen if it is preprogrammed
by the dealer or system administrator.
The display shows LOCATION OFF .
af
Note:
The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the
radio is left idle and the timer expires. You
hear the Menu Inactive Exit Tone upon feature
exit.
Advanced Features
Programmable Waypoints
Turning Off GPS
or to LOC.
2 Press the Menu Select button directly below LOC.
103
English
The display shows PREVIOUS LOC .
•
or to SAVE AS WAYPT and press the Menu
Select button directly below SEL.
or to check the time and date of the last
successful location fix.
•
4 Press the Menu Select button directly below
OPTN.
or to SAVE AS HOME and press the Menu
Select button directly below SEL and proceed
to step 5.
•
or to SAVE AS DEST. and press the Menu
Select button directly below SEL and proceed
to step 5.
or to TURN OFF GPS (if preprogrammed).
Dr
6 Press the Menu Select button directly below SEL
to turn off the GPS.
The display shows LOCATION OFF.
Ensure that your radio shows the current location on
the screen.
1 Press the Menu Select button directly below
OPTN.
2 Perform one of the following actions:
104
English
4 Press the Menu Select button directly below OK
once you are done.
One of the following scenarios occur:
Advanced Features
Saving a Waypoint
3 Use the keypad to edit the auto-generated
waypoint, if required, or press the Menu Select
button directly below CNCL to return to the Location
main screen.
af
7 To return to the Home screen, press , the PTT
button, or the Menu Select button directly below
EXIT.
A blinking cursor appears in the screen.
•
•
•
The display shows SAVED AS .
The display shows SAVED AS HOME.
The display shows SAVED AS DEST..
Viewing a Saved Waypoint
Ensure your radio shows the current location on the
screen.
Dr
1 Press the Menu Select button directly below
OPTN.
3 Perform one of the following actions:
•
or to scroll through the list.
6 To return to the previous screen, press the Menu
Select button directly below BACK, or to return to
the Home screen, press
or the PTT button.
Editing the Alias of a Waypoint
Ensure your radio shows the current location on the
screen.
1 Press the Menu Select button directly below
OPTN.
or to select a waypoint to view the location
information in full.
4 Press the Menu Select button directly below
OPTN.
or to WAYPOINTS and press the Menu Select
button directly below SEL.
The display shows a list of waypoints.
•
5 To view the longitude, time and date of the
selected waypoint, or to VIEW and press the
Menu Select button directly below SEL.
af
or to WAYPOINTS and press the Menu Select
button directly below SEL.
The display shows a list of waypoints.
Advanced Features
5 To return to the Home screen, press , the PTT
button, the preprogrammed GPS button or the
Menu Select button directly below EXIT.
or to the required saved waypoint, and press
the Menu Select button directly below OPTN.
or to EDIT NAME and press the Menu Select
button directly below SEL.
105
English
A blinking cursor appears in the EDIT NAME
screen.
Ensure your radio shows the current location on the
screen.
1 Press the Menu Select button directly below
OPTN.
5 Use the keypad to edit the alias.
6 Perform one of the following actions:
•
•
Dr
Press the Menu Select button directly below
OK once you are done.
Press the Menu Select button directly below
CNCL to return to the Waypoints main screen.
3 Perform one of the following actions:
7 The display shows  UPDATED
and the radio returns to the Waypoints main
screen.
Advanced Features
English
•
Press the Menu Select button directly below
BACK to return to the previous screen.
•
Press
or the PTT button to return to the
Home screen.
Note:
Only the preprogrammed coordinates of Home
and Destination can be edited by the user.
or to [HOME] and press the Menu Select
button directly below OPTN.
or to [DESTINATION] and press the Menu
Select button directly below OPTN.
or to EDIT LOCATION and press the Menu
Select button directly below SEL.
The first number blinks.
•
Editing the Coordinates of a Waypoint
106
•
af
8 Perform one of the following actions:
or to WAYPOINTS and press the Menu Select
button directly below SEL.
The display shows a list of waypoints.
5 Utilize the following control buttons to select the
number/coordinates if required, then press the
Menu Select button directly below EDIT to change
the number/coordinates.
Press to move to the previous number/
coordinates.
•
•
Press to move to the next number/
coordinates.
Press
or
to change the North (N), South
(S), East (E) or West (W) direction.
•
•
A blinking cursor appears in the EDIT LOCATION
screen.
Dr
6 Utilize the following control buttons or menu to
change the number/coordinates if required then
press the Menu Select button directly below OK
once.
Deleting a Single Saved Waypoint
Ensure your radio shows the current location on the
screen.
1 Press the Menu Select button directly below
OPTN.
or to WAYPOINTS and press the Menu Select
button directly below SEL.
The display shows a list of waypoints.
•
Press to move one space to the right.
Press the Menu Select button directly below
DEL to delete any unwanted characters.
Press the Menu Select button directly below
CNCL to return to the previous screen
7 Press the Menu Select button directly below OK
once complete setting up the new Home or
Destination.
One of the following scenarios occurs:
3 Perform one of the following actions:
Press to move one space to the left.
•
The display shows [HOME] UPDATED and the
radio returns to the Waypoints main screen.
The display shows [DESTINATION] UPDATED
and the radio returns to the Waypoints main
screen.
af
•
•
Advanced Features
•
•
•
or to the required saved waypoint, and
press the Menu Select OPTN. or to Edit
name and press the Menu Select button
directly below Del.
Press the Menu Select button directly below
Del.
107
English
4 The display shows  CONFIRM
DEL?.
5 Press the Menu Select button directly below YES
to delete the waypoint or press the Menu Select
button directly below NO to return to the Waypoints
main screen.
The display shows  DELETED .
Dr
Deleting All Saved Waypoints
Ensure your radio shows the current location on the
screen.
or to DELETE ALL and press the Menu Select
button directly below SEL.
The display shows ALL SAVED WAYP CONFIRM
DEL?.
5 Press the Menu Select button directly below YES
to delete all waypoints or press the Menu Select
button directly below NO to return to the Waypoints
main screen.
The display shows ALL SAVED WAYP DELETED.
Measuring the Distance and Bearing from a Saved
Waypoint
1 Press the Menu Select button directly below
OPTN.
or to WAYPOINTS and press the Menu Select
button directly below SEL.
The display shows a list of waypoints.
or to the required saved waypoint, and press
the Menu Select button directly below OPTN.
108
English
Ensure your radio shows the current location on the
screen.
1 Press the Menu Select button directly below
OPTN.
Advanced Features
af
Note:
You cannot delete any of the preprogrammed
waypoints.
or to DIST FRM HERE and press the Menu
Select button directly below SEL.
The display shows a list of waypoints.
or to the required waypoint and press the Menu
Select button directly below SEL.
Location Feature in Emergency Mode
When the Emergency feature is activated by pressing
the emergency button, the radio exits the Location
menu and returns to the Home (default) screen so
that you can see which channel the emergency signal
is going out on.
transmission, in order to allow the radio to show peerlocation, the voice should be directly sent from one
radio to another radio without passing through any
infrastructure facility such as repeaters, phone or
DVRS system. Both the transmitting radio and
receiving radio must be configured to enable them to
send and/or receive the GPS coordinates. You can
check with your nearest qualified technician for more
details.
Dr
However, you may re-enter the Location menu while
still in emergency mode, provided that Silent
Emergency has not been activated.
af
If you have turned Location off using the ON/OFF
menu key, it automatically turns back on when
Emergency is activated.
Peer-Location on the Display (ASTRO Conventional
only)
This feature is only available for radio-to-radio voice
transmissions, dispatch call and selective call in
conventional ASTRO system. For radio-to-radio
Note:
If the receiving radio is operating in a Mixed
Mode channel, and the voice transmission is
via conventional ASTRO system then the
radio can receive the location coordinates of
its peers.
This feature is also operable in a Scan Active channel
or Scan Talkback channel.
Upon receiving a voice transmission with GPS
coordinates enabled on the receiving radio, the
display shows the coordinates available in full or in
short coordinates. There are two different formats
available. Refer to the following list for the details
shown in the Peer-Location quick text. Consult your
agent to pick the best format to configure to your
radio.
If there is a solid location signal during Emergency,
the current location and the location information
received is saved as Emergency and Last Known
Location waypoints, respectively.
Advanced Features
The display shows the distance and bearing from the
current to the selected coordinates.
109
English
Full location
coordinates
Short location
coordinates
PTT ID (This is optional.)
Longitude and latitude
Relative distance or
direction.
•
•
PTT ID (This is optional.)
Longitude and latitude
Dr
Note:
•
•
•
Geofence is a virtual perimeter based on the GPS to
define a geographical area on earth.
Check with your dealer or qualified technician to
programme the geofence coordinates and actions.
When the radio enters the predefined Geofence area,
your radio receives the Dynamic Regroup command
from the system and immediately connects to a
Dynamic Regroup talkgroup. The radio display shows
the new selected Dynamic Regrouped talkgroup with
green intelligent light for your attention.
On top of that, additional features are Voice
Announcement of the new channel, and also direct
content display of a text message to indicate that you
are currently at Geofence area. Check with your
nearest qualified technician on the requirements for
these enhancements to work in Geofence.
Advanced Features
If the transmitting radio does not have GPS or
the receiving radio could not decode the GPS
signal of the received signal, the receiving
radio display shows UNKNOWN LOC on top of
ID:. If the radio is not configured to
show PTT ID, you see only UNKNOWN LOC.
110
English
af
If the transmitting radio is stale at its location
after a period of time, the receiving radio
display shows LAST KNWN LOC:
  on top of
ID:. The PTT ID seen here is
optional to be shown on the display per
requirement of usage.
Geofence (ASTRO 25 Trunking System)
Any new text messages received at Geofence shall
have its content displayed immediately on the radio
display.
Note:
If the radio is set up in DVRS, only mobile
radio is supported for this feature.
The Voice Announcement and TMS display in this
feature are optional. They must be configured to
enable you to hear and see these indicators.
When the radio enters a Geofence area, the radio
immediately sends a message ACK back to the
system.
Dr
The radio searches the current zone for the channel
with same talkgroup assigned as the Dynamic
Talkgroup and also with same system ID of current
trunk system. Once matched, the radio display shows
the first matched and connected channel alias.
Note:
If the first matched channel is not configured
with Voice Announcement, no Voice
Announcement is played.
The system sends a message to your radio. The radio
display shows a direct text message content without
any user operation. This message indicates you are
currently present in a Geofence area. This TMS
remains open on the display until user presses exit/
home to exit this screen.
Once the radio is connected, you hear a dynamic
regroup tone, the radio display shows  with temporary green color intelligent
backlight and you hear a Voice Announcement.
Note:
When the radio loses the GPS signal, the GPS
icon blinks and the radio sounds two highpitched tones repetitively to indicate that the
Note:
If there is another incoming text message
before you exit the previous message, the
message screen shall be refreshed to show
the latest message.
af
If there is no channel with matching Talkgroup ID and
trunk system ID, the radio display shows the channel
alias of .
Advanced Features
GPS has failed to operate. The radio display
shows the red intelligent light.
Entering the Geofence Area
The following procedure guides you to exit the text
message received.
Press the Menu Select button below EXIT or
to return to Home screen.
The other operations are the same as normal
dynamic regroup command.
111
English
When the radio exits the Geofence area, your radio
reverts to original channel or newly assigned
talkgroup. The radio display shows the new channel
together with Voice Announcement to indicate the
changes. Voice Announcement of the new channel
only works if that channel is configured with Voice
Announcement.
The radio then connects to the designated talkgroup.
The radio displays the talkgroup alias and dynamic
regroup tone sounds. The transmit power level
changes and the radio shows a direct text message
content without any user operation.
Mission Critical Geofence
Dr
This feature allows the radio to use the GPS receiver
to determine radio location at frequent intervals.
This feature also allows the radio to evaluate if the
radio is within the Geofence area in real time.
When the radio enters the predefined Geofence area,
the radio displays  with intelligent
backlight and the user hears a Voice Announcement.
Zone and channel alias of the Geofence area is
displayed. If the radio is set to manual, the user can
choose either to proceed with zone and channel
change or cancel the change.
112
English
Note:
If Site Selectable Alert (SSA) is enabled, the
radio mutes any alert that is received when
entering the Geofence area and unmutes
when exiting.
Advanced Features
Entering Mission Critical Geofence
af
Check with your dealer or qualified technician to
programme the geofence coordinates and actions.
Note:
Depending on how your radio is programmed,
you may or may not be alerted by Voice
Announcement (VA), TMS display, Intelligent
Backlight, and the Transmit Power Level. The
user will be alerted only if these indicators are
configured in the radio. The VA can be
programmed to alert continuously or
momentarily.
Exiting Mission Critical Geofence
When the radio exits the Geofence area, the radio
reverts to the original transmit power level, intelligent
lighting, channel or newly assigned talkgroup. Voice
announcement is cancelled or the user hears a preprogrammed VA tone. The radio displays the new
Trunking System Controls
Advanced Features
channel and a message is received to indicate the
changes.
2 Press the PTT button to talk, and release the
button to listen.
Out-of-Range Radio
Operating in Failsoft System
Dr
The failsoft system ensures continuous radio
communication during a trunked system failure. If a
trunking system fails completely, the radio goes into
failsoft operation and automatically switches to its
failsoft channel.
You hear a low-pitched tone and/or the display shows
the currently selected zone/channel combination and
OUT OF RANGE. Your radio remains in this out-ofrange condition until it locks onto a control channel, it
locks onto a failsoft channel, or it is turned off.
SmartZone
af
During failsoft operation, your radio transmits and
receives in conventional operation on a
predetermined frequency. You hear a mediumpitched tone and the display shows FAILSOFT.
When your radio goes out of the range of the system,
it can no longer lock onto a control channel.
To continue in Failsoft and to communicate with other
talkgroups, refer to the following procedure.
1 Rotate the Mode Knob to change to a different
repeater frequency.
When the trunking system returns to normal
operation, your radio automatically leaves failsoft
operation and returns to trunked operation.
The SmartZone™ feature extends communications
beyond the reach of a single-trunked site (antenna
location) when operating in a SmartZone system.
SmartZone units provide expanded wide-area
coverage.
SmartZone automatically switches the radio to a
different site when the current site signal becomes
unacceptable. This usually happens when the vehicle
in which the radio is located is driven out of the range
of one site, and into the range of another.
113
English
Under normal conditions, a SmartZone-enabled radio
functions invisibly to the operator. However, the
operator does have some manual controls on the
Control Head – the RSSI menu entry. This button can
be used to check, or change, the SmartZone
operation.
Site Trunking Feature
Dr
If the zone controller loses communication with any
site, that site reverts to site trunking.
Follow the procedure to lock and unlock a site via the
radio menu.
or to SITE.
2 Press the Menu Select button directly below
SITE.
3 Perform one of the following actions:
•
The display shows the currently selected zone/
channel combination and SITE TRUNKING.
This feature allows your radio to lock onto a specific
site and not roam among wide-area talkgroup sites.
This feature should be used with caution, since it
inhibits roaming to another site in a wide-area system.
You can toggle the lock state between locked and
unlocked by pressing the preprogrammed Site Lock/
Unlock button.
114
English
The radio saves the new site lock state and returns to
the Home screen.
Advanced Features
Locking and Unlocking a Site
•
af
Note:
When this occurs, you can communicate only
with other radios within your trunking site.
To lock the site, press the Menu Select button
directly below LOCK. The display shows SITE
LOCKED.
To unlock the site, press the Menu Select
button directly below UNLK. The display shows
SITE UNLOCKED.
Site Display and Search Button
The Site Display and Site Search button allows you
to view the name of the current site or force your
radio to change to a new one.
Viewing the Current Site
Perform one of the following actions:
Press the preprogrammed Site Search button.
or to RSSI and press the Menu Select
button directly below RSSI.
The display shows momentarily the name of the
current site and its corresponding received signal
strength indicator (RSSI).
Changing the Current Site
Announcement calls are handled in two different
ways, depending on the trunked central controller
configuration. The two types are called ruthless and
non-ruthless preemption.
Ruthless
Preemption
•
Dr
Perform one of the following actions:
•
When the radio finds a new site, it returns to the
Home screen.
Trunked Announcement
The announcement capability allows you to make
announcements to the entire user group, as well as
monitor talkgroup calls and other announcements.
af
Press and hold down the preprogrammed Site
Search button.
Press and hold down the Menu Select button
directly below RSSI.
You hear a tone and the display shows
momentary SCANNING SITE.
Advanced Features
•
•
NonRuthless
Preemption
When a ruthless preemption
announcement call is initiated, the
requesting radio begins transmitting
immediately. All associated talkgroup
calls taking place on other channels
are immediately halted, and the
radios are steered to the
announcement call.
Transmitting radios continue to
transmit until the PTT button is
released, at which time they also
unmute for the announcement call.
Individual calls (Private Conversation
and telephone interconnect) are not
affected.
When a non-ruthless preemption
announcement is initiated, the
initiating unit receives a telephonetype busy tone, followed by a call
115
English
back when all associated talkgroup
conversations end.
Once an announcement call is
pending, any attempts by other users
to initiate a talkgroup call will result in
a telephone-type busy tone. These
users will not receive a call back until
the announcement call is complete.
Dr
Initiating an Announcement
Ensure your radio has been programmed to allow
announcement calls.
Advanced Features
This feature allows the user to select the functionality
of the radio based on the Ignition State of the radio
user’s vehicle. The following options are available.
English
Tx Inhibit
This option allows the user to power on and power off
the radio through the Power button regardless of the
current state of the Ignition. In addition, if the Ignition
is not present, then all transmissions are inhibited.
This includes receiving any Trunking dispatch
communications since the radio will not affiliate with
the Trunking systems.
PTT Tx Inhibit
This option allows the user to power on and power off
the radio through the Power button regardless of the
current state of the Ignition. In addition, if the Ignition
is not present, then all PTT button transmissions are
inhibited. However, the radio is able to affiliate with
the Trunking systems.
Ignition Switch Options
116
This option allows the user to power on and power off
the radio through the Power button regardless of the
current state of the Ignition.
af
1 Turn the Mode Knob to locate the announcementgroup mode.
2 Press the PTT button to initiate the
announcement.
Blank
Required
This option allows the user to power on the radio only
if the Ignition is present. The radio can be powered off
either through Power button press or when Ignition is
Note:
While Ignition is not present, the radio
powers-off with a radio-user Power Off
button / knob selection if the radio was
powered-up with an Emergency Power Up
footswitch-press or Ignition Auto Power Off
timer is running.
This option allows the radio to power off when
Inactivity Auto Power Off Timer expires, or, when
Ignition Auto Power Off Timer expires.
Soft Power Off
Dr
This option allows the user to power on the radio
either through Power button presses or when the
Ignition is detected. Meanwhile, if the Power button
was pressed or the Ignition was removed, the radio
will be turned off.
Ignition Only Power Up
While Ignition is present, the radio powers-on
with a radio-user Power On button / knob
selection only if the radio was powered-down
with Inactivity Auto Power Off timer.
Using Emergency Power Up
This feature allows the user to power on the radio and
automatically transmits an emergency mode
transmission on personalities with emergency
enabled, with the use of a footswitch. In addition,
when the Ignition Switch option is set to either Tx
Inhibit or PTT Tx Inhibit, this feature will not be
available to the users.
This option allows the user to power on the radio only
when Ignition is detected and will power off when it is
removed. The radio does not power on or off with the
Power button press.
This option allows the radio to power off when
Inactivity Auto Power Off Timer expires, or, when
Ignition Auto Power Off Timer expires.
af
This option allows the radio to power off when
Inactivity Auto Power Off Timer expires, or, when
Ignition Auto Power Off Timer expires.
Advanced Features
lost. In addition, the radio automatically powers on
when the Ignition is present only if the radio was
turned off due to the ignition being removed.
Press the footswitch to turn on the radio and
launch Emergency.
A tone sounds and the display shows Emergency.
117
English
Auto Power Off Timer
Auto Power Off feature powers off the radio when no
user actions occur during a preprogrammed length of
time. There are two different versions of Auto Power
Off:
This timer begins once the radio is
power-on. While the timer is active
any user interaction with the radio
resets the timer.
Ignition
Auto Power
Off Timer
This timer begins once the vehicle
key is removed, when the voltage at
the ignition sense is removed. While
the timer is active any user
interaction with the radio resets the
timer. When the vehicle key is
reapplied, the voltage at the ignition
is reconnected, this timer is stopped.
Dr
Inactivity
Auto Power
Off Timer
the timer expires or the timer is reset. The radio
automatically powers off after the timer expires. The
duration of the timer is preprogrammed.
Voice Announcement
This feature enables the radio to audibly indicate the
current feature mode, zone or channel the user has
just assigned. This audio indicator can be customized
per customer requirements. This is typically useful
when the user is having difficulty reading the content
shown on the display.
Advanced Features
118
Although both Inactivity Auto Power Off and Ignition
Auto Power Off can be enabled together, Ignition
Auto Power Off timer is mutually exclusive with
Inactivity Auto Power Off timer when both are
enabled. During the last two minutes of the timer
countdown, the radio generates continuous low tone
and blinks Powering Off warning on the display until
English
Note:
This feature must be preprogrammed by a
qualified radio technician.
af
Each voice announcement is within a limit of three
seconds maximum. The sum duration of all different
voice announcements in a radio shall be no more
than 1000 seconds.
Check with your agent if Voice Announcement
is available for the feature you need.
The two options of priority for the Voice
Announcement available are:
•
Low Disables the voice of the feature from
announcing when the radio is receiving calls.
•
You hear a voice announcement when the features
below are preprogrammed in the radio.
•
Dr
•
The radio powers up. The radio announces the
current zone and channel it is transmitting.
Press the preprogrammed voice announcement
button (which specifically programmed to playback
the current zone and channel). The radio
announces the current zone and channel it is
transmitting.
Advanced Features
High Enables the voice of the feature to announce
even when the radio is receiving calls.
Change to a new channel remaining within the
current zone. The radio announces the current
channel.
Press either the Menu Select button or
preprogrammed button or switch of the radio to
launch or terminate Scan, PL Disabled,
Talkaround/Direct or Transmit Inhibit. The radio
announces the corresponding feature activation or
deactivation.
Site Selectable Alerts (ASTRO 25)
af
A Site Selectable Alert (SSA) is an Intelligent Lighting
indicator together with audio alert sent to radios at a
site or a few sites to notify the users when there is a
special situation that they need to be aware of. Only
authorized radios are enabled to send SSA.
•
All the three programmable buttons at the
side of the radio support this feature.
Change to a new zone. The radio announces the
current zone and channel it is transmitting.
Upon the activation of a SSA, the receiving radios
display the alert alias and generate the periodic alert
tone.
Note:
Pressing this preprogrammed playback
button enables the voice feature to
announce in High priority.
Note:
Alert alias, alert tone, and alert period can be
preprogrammed. Alert period is the duration
for the radio to repeat the alert tone. An
interval of 5 seconds might impact the battery
119
English
life of the radio. Check with your dealer or
system administrator for more details.
When mixing SSA with received voice audio,
the SSA alert is reduced in volume to ensure
that the voice message is still heard clearly.
Therefore, it is important that the SSA audio
files are created with clear loud audio to
ensure they can still be heard clearly when
played at reduced levels.
Dr
Sending SSA Notification to Single Site
or to SSA.
120
English
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
REQ FAILED.
If the request is successful, the display shows REQ
SUCCESSFUL.
If the site is not available, the display shows  NOT AVAILABLE.
If the site does not exist, the display shows  DOES NOT EXIST.
or to START ALERT and press the Menu Select
button directly below SEL.
The display shows the Select Site screen.
or to the desired Site Alias. Press the Menu
Select button directly below SEL.
The display shows the Select Alert screen.
6 To return to the Home screen, press the Menu
Select button directly below EXIT.
If you are at the site designated to receive this alert,
you can hear an alert tone repeated periodically. The
display shows the  with the intelligent
lighting at Home screen.
Advanced Features
or to select the desired Alert Alias and press
the Menu Select button directly below SEND.
The display shows SENDING REQ.
af
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
1
or to SSA.
or to select the desired Alert Alias and press
the Menu Select button directly below SEND.
The display shows SENDING REQ.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
REQ FAILED.
If the request is successful, the display shows REQ
SUCCESSFUL.
Dr
or to START ALERT and press the Menu Select
button directly below SEL.
The display shows the Select Site screen.
If the site is not available, the display shows  NOT AVAILABLE.
If the site does not exist, the display shows  DOES NOT EXIST.
af
or to [SITEID ENTRY] to send alert via manual
entry. Press the Menu Select button directly
below EDIT.
The display shows the Enter SiteID screen.
Advanced Features
Sending SSA Notification to Single Site Via Manual
Entry
If a wrong Site ID is entered, the display shows
INVALID ID and prompts to enter the Site ID
again.
If you are at the site designated to receive this alert,
you can hear an alert tone repeated periodically. The
display shows the  with the intelligent
lighting at Home screen.
5 Key in the desired Site ID and press the Menu
Select button directly below OK.
If a correct Site ID is entered, the display shows
the Select Alert screen.
7 To return to the Home screen, press the Menu
Select button directly below EXIT.
Sending SSA Notification to All Sites
or to SSA.
121
English
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
or to START ALERT and press the Menu Select
button directly below SEL.
The display shows the Select Site screen.
If you are at the site designated to receive this alert,
you can hear an alert tone repeated periodically. The
display shows the  with the intelligent
lighting at Home screen.
Sending SSA Notification to All Available Sites
Dr
or to [All SITES] and press the Menu Select
button directly below SEL.
The display shows the Select Alert screen.
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
REQ FAILED.
or to START ALERT and press the Menu Select
button directly below SEL.
The display shows the Select Site screen.
If the request is successful, the display shows REQ
SUCCESSFUL.
If one or more sites are unavailable, the display
shows NOT ALL SITES AVAILABLE. Repeat 3.
122
6 To return to the Home screen, press the Menu
Select button directly below EXIT.
English
or to [All AVAIL] and press the Menu Select
button directly below SEL.
The display shows the Select Alert screen.
Advanced Features
af
or to select the desired  and
press the Menu Select button directly below SEND.
The display shows SENDING REQ.
or to select the desired  and
press the Menu Select button directly below SEND.
The display shows SENDING REQ.
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
REQ FAILED.
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
REQ FAILED.
6 To return to the Home screen, press the Menu
Select button directly below EXIT.
If the request is successful, the display shows REQ
SUCCESSFUL.
Dr
If you are at the site designated to receive this alert,
you can hear an alert tone repeated periodically. The
display shows the  with the intelligent
lighting at Home screen.
If the site is not available, the display shows  NOT AVAILABLE.
If the site does not exist, the display shows  DOES NOT EXIST.
Stopping SSA Notification of a Single Site
or to SSA.
or to STOP ALERT and press the Menu Select
button directly below Sel.
The display shows the Select Site screen.
or to select the desired Site Alias and press the
Menu Select button directly below SEND.
The display shows SENDING REQ.
The SSA Alert for the designated site stops.
Stopping SSA Notification of a Single Site Via Manual
Entry
5 To return to the Home screen, press the Menu
Select button directly below EXIT.
af
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
Advanced Features
If the request is successful, the display shows REQ
SUCCESSFUL.
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
or to STOP ALERT and press the Menu Select
button directly below SEL.
123
English
The display shows the Select Site screen.
or to [SITEID ENTRY] and press the Menu
Select button directly below EDIT.
The display shows the Enter SiteID screen.
5 Key in the required Site ID and press the Menu
Select button directly below SEND.
Stopping SSA Notification of All Sites
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
or to STOP ALERT and press the Menu Select
button directly below SEL.
The display shows the Select Site screen.
or to [ALL SITES] and press the Menu Select
button directly below SEND.
The display shows SENDING REQ.
One of the following scenarios occur:
•
•
6 To return to the Home screen, press the Menu
Select button directly below EXIT.
124
The SSA Alert for the designated site stops.
English
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
REQ FAILED.
If the request is successful, the display shows REQ
SUCCESSFUL.
Advanced Features
•
If a wrong Site ID is entered, the display shows
INVALID ID and prompts to enter the Site ID
again.
If a correct Site ID is entered, the display
shows SENDING REQ.
If the request is successful, the display shows
REQ SUCCESSFUL.
If the single site is not available, the display
shows  NOT AVAILABLE.
If the single site does not exist, the display
shows  DOES NOT EXIST.
af
•
Dr
•
or to SSA.
If one or more sites are not available, the display
shows NOT ALL SITES AVAILABLE. Repeat step
3.
5 To return to the Home screen, press the Menu
Select button directly below EXIT.
Advanced Features
The SSA Alert for all sites stop.
Channel Change on Off Hook on All Channels
Stopping SSA Notification of All Available Sites
This feature enables the mode of the radio to be
changed based on the HUB on/off-hook state on all
control heads.
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
Dr
or to STOP ALERT and press the Menu Select
button directly below SEL.
The display shows the Select Site screen.
When the radio is in off-hook state, manual mode
change (including mode change triggered by third
party devices) is allowed. Radio reverts back to the
last mode before off-hook once the radio goes onhook.
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
REQ FAILED.
If the request is successful, the display shows REQ
SUCCESSFUL.
5 To return to the Home screen, press the Menu
Select button directly below EXIT.
The SSA Alert for all available sites stop.
Note:
During PL Defeats and Suspend Scan during
on-hook state, the radio is converted to work
in new channel and Channel Change on Off
Hook feature is suspended until these
conditions end.
af
or to [All AVAIL] and press the Menu Select
button directly below SEND.
The display shows SENDING REQ.
Whenever the radio goes off-hook, the radio changes
to a preprogrammed zone channel specifically for offhook state. When the user returns the radio to onhook state, it reverts to its previous channel zone
before the radio goes off-hook.
We do not recommend that “Hub Suspend
Scan" and "Channel Change on Off Hook" to
be enabled simultaneously.
125
English
During Dynamic Regroup channel selector
lock state, Emergency, Transmit Inhibit, radio
lock, or when external key loaded is attached
to the radio, the Channel Change on Off Hook
feature is suspended until these conditions
end.
For Dual Radio, the state of the HUB
on the unselected radio is always
considered as on-hook. The state of
the HUB of the selected radio is always
reflected as the actual states of the
HUB. When the HUB is placed offhook, the selected radio makes
channel change per CPS configuration,
and the unselected radio does not
trigger channel change.
126
English
Users must also be familiar with the
functionality of this feature as they have to be
aware that removing the microphone triggers
mode change most of the time.
Low Voltage Threshold Warning
This feature is created for APX mobile radio to
provide warning for low voltage threshold.
Advanced Features
af
With Channel Change on Off Hook
enabled, when the HUB is placed offhook, and there is radio switch, the
new selected radio moves to the target
channel zone on off hook, and the new
unselected radio reverts to the last user
selected channel before off-hook.
When there are multi-control heads
connected, the states of these HUBs
reflect the active control head(s) state.
Any HUB placed off-hook by active
control head(s) makes the radio goes
off-hook state. Only when all HUBs are
placed on-hook, the radio can be in onhook state.
Note:
This feature needs to be carefully enabled.
Dr
The Off
Hook
State for
APX™ Dual
Radio
Setup
The Off
Hook
State for
Multiple
Radios
Setup
A specific external device is attached to the radio to
monitor the automobile voltage. When the car battery
went lower than a pre-defined threshold, the external
device asserts the Vehicular Interface Port (VIP) input
to the radio. When the voltage of the battery becomes
The voltage threshold is customized in the external
device settings.
Wi-Fi
This feature allows you to turn Wi-Fi® on or off. Wi-Fi
can be used for wireless programming of the radio
with the Radio Management tool. [3]
Dr
When the VIP switch turns on, the VIP asserts input
to the radio. The radio immediately initiates a 15
seconds of low Voltage Pre-alert Timer. If the status
of the VIP changed before this time-out timer ends,
the radio returns to normal operation.
Note:
Wi-Fi Network Name (SSID) for the radio to
connect to must be preprogrammed by a
qualified radio technician. Check with your
dealer or system administrator for more
information
Turning Wi-Fi On or Off
af
If the status from the VIP unchanged when the timeout timer ends, the radio shows LOW BATTERY on the
display and also sounds low battery/voltage alert
tone. The radio sounds a short, high-pitched tone
immediately after the PTT button is released.
Advanced Features
normal, the external device de-asserts the VIP input
to the radio.
The following methods are options on how to turn WiFi® on or off. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
Note:
If the mobile radio does not have a control
head connected, the bricks can only alert the
user with battery alert tone and the transmit
chirp.
•
This feature is available to capable and ordered option.
Turning Wi-Fi on or off via the preprogrammed
button:
127
English
a) To toggle the Wi-Fi on or off, press the
preprogrammed Wi-Fi button.
This button must be preprogrammed by a
qualified radio technician. Check with your
dealer or system administrator for more
information.
•
•
Checking the Wi-Fi Configuration and Status of the
Radio
1 Perform one of the following actions:
•
•
128
English
Looking for available Wi-Fi
networks that have been
preprogrammed into the radio.
Connecting In the process of connecting to a
found Wi-Fi network.
Connected Connected to one of the
preprogrammed Wi-Fi networks.
No Service No available networks or
connection with one of the
networks failed.
Long press the preprogrammed Wi-Fi button.
or to WiFi and press the Menu Select
button directly below WiFi.
If the radio is Wi-Fi connected, you see a Wi-Fi
signal strength indicator,
on the display.In
addition, the WiFi menu shows Connected under
the connection Status heading, what network you
are connected to under the Network heading, and
the signal strength to that network under the Sig
Strength heading.
Advanced Features
If the display shows WiFi Status being Off,
press the Menu Select button directly below
On.
If the display shows WiFi Status as
Searching, Connecting, Connected or No
Service, press the Menu Select button
directly below Off to turn Wi-Fi off.
Searching
af
•
Dr
Turning Wi-Fi on or off via the radio menu button:
a) or to WiFi and press the Menu Select
button directly below WiFi.
The display shows the current status of the Wi-Fi®
as described next.
2 Press
to exit.
Viewing Recent Calls
This feature allows you to view the recent incoming
and outgoing call information of the following call
types:
Call Alert
Selective Call
Private Call
Phone Call (Outgoing Only)
The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Selecting the Power Level
Dr
•
•
•
•
Advanced Features
d) To return to the Home screen, press the Menu
Select button directly below BACK,
or the
PTT button.
Utilities
b) Press the Menu Select button directly below
RCNT to access the RECENT CALLS feature
screen.
c) or to scroll through the list.
Viewing recent calls via the radio menu:
a) or to RCNT.
This feature enables you to reduce the transmit power
level for specific case that requires a lower power
level. You can select the power level at which your
radio transmits. The radio always turns on to the
default setting.
af
Note:
The radio can also be preprogrammed to log
only the radio IDs associated with incoming
Dispatch Calls. Check with your dealer or
system administrator for more information.
Note:
This feature must be preprogrammed by a
qualified radio technician.
Power level LOW enables a shorter transmitting
distance and to conserve power. Power level HIGH
enables a longer transmitting distance.
The following methods are options on how to select
the power level. The result of all the methods is the
same. You can use the options interchangeably
129
English
depending on your preference and the programmed
functions.
•
Selecting the Power Level via the radio menu:
a) or to PWR.
The following methods are options on how to select a
radio profile. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
b) Press the Menu Select button directly below
PWR.
•
Dr
•
Selecting the Power Level via the Transmit
Power Level switch:
a) Use the preprogrammed Transmit Power
Level switch to toggle the power level between
low and high power.
Note:
The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the
radio is left idle and the timer expires. You will
hear the Menu Inactive Exit Tone upon feature
exit.
af
This feature allows you to manually switch the visual
and audio settings of the radio. The display, backlight,
alert tones, and audio settings are defined according
to the preprogrammed radio settings of each radio
profile.
130
Please refer to a qualified technician for more
information.
English
c) Press the Menu Select button directly below
SEL to select the required radio profile, or press
the Menu Select button directly below EXIT to
exit the screen without making any changes.
The radio returns to the Home screen. The profile
name on the Home screen indicates the current
selected radio profile.
Advanced Features
The display shows LOW POWER and the low power
icon or the display shows HIGH POWER and the high
power icon.
Selecting a Radio Profile
Selecting a radio profile via the preprogrammed
Profile button:
a) Press the preprogrammed Profile button.
b) or to scroll through the menu selections.
•
Selecting a radio profile via the radio menu:
•
or to PRFL and press the Menu Select
button directly below PRFL to access the
Profiles feature screen.
b)
Controlling the Display Backlight
Dr
or to scroll through the menu selections.
c) Press the Menu Select button directly below
SEL to select the required radio profile, or press
the Menu Select button directly below EXIT to
exit the screen without making any changes.
The radio returns to the Home screen. The profile
name on the Home screen indicates the current
selected radio profile.
Advanced Features
a)
To turn the backlight on, press any key of the
keypad, the Menu Select or Menu Navigation
buttons, or any programmable radio controls or
buttons
Turning the Keypad Tones On or Off
You can enable and disable keypad tones as needed.
Turning the tones on or off via the preprogrammed
Keypad Mute button:
a) To turn the tones off or on, press the
preprogrammed Keypad Mute button.
•
Turning the tones on or off via the radio menu:
a) or to MUTE.
af
•
You can enable or disable the radio’s display
backlight as needed, if poor light conditions make the
display or keypad difficult to read.
Perform one of the following actions:
•
Depending on how your radio is preprogrammed, you
can also maintain a minimum backlight level on the
radio's front display.
b) Press the Menu Select button directly below
MUTE.
The display shows momentary TONES OFF,
indicating that the tones are disabled or the
display shows momentary TONES ON, and you
hear a short tone indicating that the tones are
enabled.
To toggle the backlight on or off, press the DIM
button.
131
English
Turning Voice Mute On or Off
You can enable and disable voice transmission, if
needed.
•
Turning Voice Mute off or on via the
preprogrammed Voice Mute button:
a) To turn the feature off or on, press the
preprogrammed Voice Mute button.
•
Turning Voice Mute on or off via the radio menu:
a) or to VMUT and press the Menu Select
button directly below VMUT.
The timer is defaulted at 60 seconds, but it can be
preprogrammed from 3 to 120 seconds, in 15-second
intervals, or it can be disabled entirely for each radio
mode, by a qualified radio technician.
Note:
You hear a brief, low-pitched, warning tone
four seconds before the transmission times
out.
Dr
Using the Time-Out Timer
This feature turns off the transmitter of your radio.
You cannot transmit longer than the preset timer
setting.
132
If you attempt to do so, the radio automatically stops
your transmission, and you hear a talk-prohibit tone.
English
2 Release the PTT button.
The timer resets.
3 To re-transmit, press the PTT button.
The time-out timer restarts and the LED lights up
solid red.
Advanced Features
af
The display shows momentary VOICE MUTE OFF, and
you hear a short tone, indicating that the feature is
disabled or the display shows momentary VOICE
MUTE ON, and you hear a short tone, indicating that
the feature is enabled.
1 Hold down the PTT button longer than the
preprogrammed time.
You hear a short, low-pitched warning tone, the
transmission is cut-off, and the LED goes out until
you release the PTT button.
Using Conventional Squelch Operation Features
This feature filters out unwanted calls with low signal
strength or channels that have a higher than normal
background noise.
Digital Options
or to SQL.
2 Press the Menu Select button directly below SQL.
The display shows SQUELCH XX, where XX is the
value for the current squelch.
3 Perform one of the following actions:
•
Press the Menu Select button directly below
“+” to increase the squelch volume.
Press the Menu Select button directly below “-”
to decrease the squelch volume.
4 Press
Dr
•
Advanced Features
to return to the selected channel.
One or more of the following options may be
preprogrammed in your radio. Check with your dealer
or system administrator for more information.
Result
Digital Carrier-Operated
Squelch (COS)
You hear any digital traffic.
Normal Squelch
You hear any digital traffic having the correct network access code.
Selective Switch
You hear any digital traffic having the correct network access code and
correct talkgroup.
af
Option
Analog Options
Mode
Result
Carrier squelch (C)
You hear all traffic on a
channel.
PL or DPL
The radio responds only
to your messages.
Using the PL Defeat Feature
Tone Private Line (PL), Digital Private-Line (DPL),
and carrier squelch can be available
(preprogrammed) per channel.
This feature allows you to override any coded squelch
(DPL or PL) that might be preprogrammed to a
channel. The radio also unmutes to any digital activity
on a digital channel.
Place the preprogrammed PL Defeat switch in the
PL Defeat position.
133
English
One of the following scenarios occurs:
•
•
You hear any activity on the channel.
The radio is muted if no activity is present.
Note:
When this feature is active, the Carrier
Squelch status indicator is displayed.
When smart PTT is enabled in your radio, you cannot
transmit on an active channel.
If you try to transmit on an active smart-PTT channel,
you hear an alert tone, and the transmission is
inhibited. The LED lights up solid yellow to indicate
that the channel is busy.
The following table shows the variations of smart
PTT:
Digital PTT ID Support
Mode
Description
Transmit Inhibit
on Busy Channel with Carrier
You cannot transmit if any traffic
is detected on the channel.
The ID number of your radio is also automatically sent
every time the PTT button is pressed. This is a perchannel feature. For digital voice transmissions, the
ID of your radio is sent continuously during the voice
message.
Transmit Inhibit
on Busy Channel with Wrong
Squelch Code
You cannot transmit on an active
channel with a squelch code or (if
secure-equipped) encryption key
other than your own. If the PL
code is the same as yours, the
transmission is not prevented.
Dr
This feature allows you to see the radio ID (number)
of the radio from whom you are currently receiving a
transmission. This ID, consisting up to a maximum of
eight characters, can be viewed by both the receiving
radio and the dispatcher.
Advanced Features
Smart PTT is a per-personality, programmable
feature used in conventional radio systems to keep
radio users from talking over other radio
conversations.
134
English
af
Smart PTT Feature (Conventional Only)
Quick-Key Over- Your radio must be preprogramride
med to allow you to use QuickKey Override. This feature can
work in conjunction with either of
the two above variations. You
Advanced Features
Mode
The radio sounds alert tone when user enters or exits
this feature and also when PTT is pressed.
Description
can override the transmit-inhibit
state by quick-keying the radio. In
other words, two PTT button
presses within the preprogrammed time limit.
Note:
Acknowledgement of any messages required
from the radio is not transmitted if the Transmit
Inhibition is enabled.
Enabling Transmit Inhibition
Transmit Inhibit
Dr
This feature is available for APCO 25 trunking, Type II
trunking and Conventional operations for all APX
radios.
•
•
User can physically control the transmission of the
radio especially during operation in hazardous
environments with this feature. An environment is
considered hazardous when the power emitted by the
radio power amplifier could initiate an explosion or
other dangerous reactions.
When the Transmit Inhibit feature is disabled, the
radio functions according to its normal operations.
or to TXIN. Press the Menu Select button
below TXIN.
Turn off the ignition through Ignition Sense
Line.
Note:
If the user has disabled TX Inhibit via the
menu and then moves the switch to the
position where TX Inhibit is enabled, the
new value overwrites the menu value.
af
When Transmit Inhibit feature is enabled, the radio
stops all transmission including voice and data. The
radio can receive messages but is not able to reply
the acknowledgment request of the received
message.
Perform one of the following actions:
The display shows TX INHIBIT ON. You hear a
sequence of short, low-high tones to indicate
transmission is inhibited.
Pressing PTT triggers the radio sounds a constant
short, low-pitched tone (reject tone).
135
English
•
Note:
The status of the Transmit Inhibit does not
change after the radio powers up.
•
The softkey TXIN is created to ease the user
of inhibition transmission besides relying
solely on Ignition Sense Line. Only if the
Ignition Sense Line is on, the softkey TXIN
works. If the Ignition Sense Line is on, user
can always turn on or off the Transmit
Inhibition using the softkey TXIN; but when the
Ignition Sense Line is off, function of softkey
TXIN is suspended, and the Transmit
Inhibition function is always off.
or to TXIN. Press the Menu Select button
below TXIN.
Turn on the ignition through Ignition Sense
Line.
Dr
Note:
If the user has disabled TX Inhibit via the
softkey and then moves the switch to the
position where TX Inhibit is enabled, the
new value overwrites the menu value.
af
The display shows TX INHIBIT OFF. You hear a
sequence of short, high-low tone (Transmit Inhibit
Off tone) to indicate transmission is back to normal
operation.
Advanced Features
Disabling Transmit Inhibition
136
English
Perform one of the following actions:
General Radio Information
Your radio contains information on the following:
•
•
•
Radio Information
IP Display
Control Assignments
If PTT TX Inhibit is enabled, when using multi control
head with one active configuration, with the PTT
pressed on the active control head, any press on the
programmable button of the other control head which
meant for that control head to be active control head
will cause an unstoppable long low-pitched tone (Talk
Prohibit Tone). The display shows TX INHIBIT This
behavior can be stopped by pressing PTT button
again on the active control head
Note:
The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the
radio is left idle and the timer expires. You
Accessing the Radio Information
This feature displays the following radio information:
•
•
•
Dr
•
•
VRS Version
URC Version
DVRS App Version (only when DVRS is available)
DVRS DSP Version (only when DVRS is
available)
DVRS CP Version (only when DVRS is available)
AUX CH Version
Note:
To return to the Home screen, press
time.
at any
or to INFO and press the Menu Select button
directly below INFO.
af
or to RADIO INFO and press the Menu Select
button directly below SEL.
The display shows the Information screen.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Host Version
Secure Version
CH 1 – 4 Version (depending on the number of
channels connected.)
Siren Version
Model Number
ESN
Flash Code
Tuning Version
DSP Version
KG (Secure Algorithm)
Serial Number
Flash Size & Type
RF Band(s)
Processor Version
MCHIB Version
CHIB Version
TIB Version
TRC Version
•
•
•
•
Advanced Features
hear the Menu Inactive Exit Tone upon feature
exit.
3 Perform one of the following actions:
•
•
or to scroll through the various information.
Press the Menu Select button directly below
BACK to return to the previous screenp.
•
Press
to return to the Home screen .
137
English
Viewing the IP Information
Viewing the Control Assignments
This feature displays the device name, IP address,
and status of your radio.
This feature displays the programmable radio
functions assigned to the controls of your radio for the
currently selected channel.
Note:
The device name of your radio is
preprogrammed. Check with your dealer or
system administrator for more information.
•
•
•
138
English
or to scroll through the various information.
Press the Menu Select button directly below
BACK to return to the previous screen.
Press
Press the preprogrammed Info button.
or to INFO and press the Menu Select
button directly below INFO.
or to CONTROL MAP and press the Menu Select
button directly below SEL.
The display shows the Control Map screen.
3 Perform one of the following actions:
Advanced Features
or to INFO and press the Menu Select
button directly below INFO.
3 Perform one of the following actions:
•
•
•
Press the preprogrammed Info button.
or to IP INFO and press the Menu Select
button directly below SEL.
•
1 Perform one of the following actions:
af
Dr
1 Perform one of the following actions:
See Programmable Features on page 23 for more
information on the various programmable features of
your radio.
•
•
or to scroll through the various information.
Press the Menu Select button directly below
BACK to return to the previous screen.
•
Press
to return to the Home screen.
to return to the Home screen.
Advanced Features
External Alarms (Horn and Lights)
Using Permanent Horn and Lights
All control heads can be equipped for external alarms
(horn and lights) that are activated when a Call Alert
page, Private Conversation call, or phone call is
received.
The radio always powers up with the horn and lights
feature enabled.
Dr
Note:
The horn and lights feature must be enabled
by a qualified radio technician.
If Permanent Horn and Lights is enabled, horn and
lights will automatically turn on when the radio powers
up.
1 Press the Menu Select button directly below H/L
once to turn off the alarm(s).
2 Press the Menu Select button directly below H/L
momentarily to enable the last selected alarm(s).
The display briefly shows the enabled alarms, and
then reverts back to the selected mode.
Using Non-Permanent Horn and Lights
Changing the Selected Alarms
af
1 Press the Menu Select button directly below H/L
momentarily.
The last selected alarm(s) are enabled, and the
display shows the enabled alarm(s) alternating
with the selected mode, until it is turned off.
2 Perform one of the following actions:
2 Press the Menu Select button directly below H/L
momentarily to turn off the alarm(s).
The display shows HORN/LITES OFF.
1 Press the Menu Select button directly below H/L
until the display shows the required alarm.
•
•
•
Press the Menu Select button directly below H
+L to turn on both horn and lights.
Press the Menu Select button directly below
Lgts to turn on the lights.
Press the Menu Select button directly below
Horn to turn on the horn.
139
English
One of the following scenarios occurs:
•
•
•
•
If you choose H+L, the display shows HORN/
LITES ON.
If you choose LGTS, the display shows LIGHTS
ON.
If you choose HORN, the display shows HORN
ON.
Dr
An OFF entry is shown at the softkey when one of
the alarms is active. Selecting OFF deactivates the
current active alarm.
•
Press the Menu Select button directly below
CALL, PAGE or PHON to turn off the external
alarm(s) and access that feature.
Press the PTT button or any control-head
button to turn off the external alarm(s).
The Volume Knob and the DIM button have no
effect on the state of the external alarm(s).
2 Press the Menu Select button directly below H/L
momentarily to rearm the horn and lights feature.
Turning Off Rearmable External Alarms
Receiving a Call While Alarms are Turned On
Perform one of the following actions:
The display shows the type of call received (CALL,
PAGE, or PHONE) and the selected mode name.
The time interval can be modified by a qualified radio
technician.
Turning Off Non-Rearmable External Alarms
1 Perform one of the following actions:
140
English
•
Press the Menu Select button directly below
CALL, PAGE or PHON to turn off the external
alarm(s) and access that feature. The external
alarm(s) is turned off and automatically
rearmed so that when you exit the entry, the
external alarm(s) will automatically turn on.
Press the PTT button or any control head
button other than the Menu Select button
directly below H/L to turn off the external
alarm(s). The external alarm(s) is turned off
and automatically rearmed so that when you
Advanced Features
af
When you receive a call with the Alarms turned on,
you hear the vehicle’s horn sounds for four seconds,
and/or the car lights turn on for 60 seconds.
•
Advanced Features
•
exit the entry, the external alarm(s) will
automatically turn on.
Press the Menu Select button directly below
H/L to turn off the external alarm(s) and exit the
Horn and Lights feature. Press the Menu
Select button directly below H/L momentarily
to rearm the horn and lights feature.
Dr
The Volume Knob and the DIM button have no
effect on the state of the external alarm(s).
af
141
English
If symptoms persist or, if your unit exhibits other
problems, contact a qualified radio technician.
Helpful Tips
Cleaning the External Surface of the Radio
Radio Care
Caution:
Do not use solvents to clean your radio.
Spirits may permanently damage the radio
housing.
The following are suggestions to assist you in
troubleshooting possible operating problems.
Dr
Caution:
The cables that connect to the rear of the
radio could have live voltage on some of their
pins. Do not remove or reconnect these
cables. Only a qualified radio technician
should perform this task. Service performed by
unauthorized personnel may cause the radio
to transmit an emergency alarm even if the
unit is turned off.
Do not submerge the radio in detergent
solution.
1 Combine one teaspoon of mild diswashing
detergent to one gallon of water (0.5% solution).
af
Helpful Tips
142
If radio operation is intermittent, check with other
persons using the system for similar problems before
taking the radio in for service. Similar problems
indicate a system malfunction rather than a radio
failure.
English
If your radio is locked up or the display shows FAIL
01/09, turn the radio off and then back on. If this
does not correct the condition, take the radio to a
qualified radio technician for service.
2 Apply the solution sparingly with a stiff, nonmetallic, short-bristled brush, making sure excess
detergent does not get entrapped near the
connectors, controls or crevices.
3 Dry the radio thoroughly with a soft, lint-free cloth.
Cleaning the External Plastic Surface
The detergent-water solution should be applied
sparingly with a stiff, non-metallic, short-bristled brush
to work all loose dirt away from the radio.
Helpful Tips
A soft, absorbent, lint-free cloth or tissue should be
used to remove the solution and dry the radio.
Make sure that no water remains entrapped near the
connectors, cracks, or crevices.
Dr
af
143
English
Accessories
The accessory link below is for APX radios. Not all
accessories are FCC certified to operate with all APX
models and/or bandsplits. Please refer to the specific
APX radio price pages for a list of FCC certified
accessories or contact your sales representative for
accessory compatibility.
Dr
http://www.motorolasolutions.com/APX
Accessories
144
English
af
Note:
GPS only antenna is only used in either a
single band UHF or 700/800 application where
the Public Safety Microphone (PSM) is used
with the corresponding PSM antenna. This
antenna is only for GPS reception and cannot
be used for receive/transmit operation at UHF,
VHF or 700/800. This antenna is never to be
used on the PSM.
5
Special Channel Assignments
Emergency Channel
Dr
If you are in imminent and grave danger at sea and
require emergency assistance, use VHF Channel 16
to send a distress call to nearby vessels and the
United States Coast Guard. Transmit the following
information, in this order:
• distance to a well-known landmark
• vessel course, speed or destination
State the nature of the distress.
Specify what kind of assistance you need.
State the number of persons on board and the
number needing medical attention, if any.
Mention any other information that would be
helpful to responders, such as type of vessel,
vessel length and/or tonnage, hull color, etc.
“OVER.”
Wait for a response.
If you do not receive an immediate response,
remain by the radio and repeat the transmission at
intervals until you receive a response. Be
prepared to follow any instructions given to you.
af
1 “MAYDAY, MAYDAY, MAYDAY.”
2 “THIS IS _____________________, CALL SIGN
__________.” State the name of the vessel in
distress 3 times, followed by the call sign or other
identification of the vessel, stated 3 times.
3 Repeat “MAYDAY” and the name of the vessel.
4 “WE ARE LOCATED AT
_______________________.” State the position
of the vessel in distress, using any information that
will help responders to locate you, e.g.:
10
11
Maritime Radio Use in the VHF Frequency Range
Maritime Radio Use in the VHF
Frequency Range
latitude and longitude
bearing (state whether you are using true or
magnetic north)
For non-commercial transmissions, such as fishing
reports, rendezvous arrangements, repair scheduling,
or berthing information, use VHF Channel 9.
•
•
Non-Commercial Call Channel
Operating Frequency Requirements
A radio designated for shipboard use must comply
with Federal Communications Commission Rule Part
80 as follows:
145
English
•
•
•
in the simplex mode on the ship station
transmitting frequencies specified in the
156.025 – 157.425 MHz frequency band, and
in the semiduplex mode on the two frequency
channels specified in the table below.
Dr
Maritime Radio Use in the VHF Frequency Range
•
on ships subject to Part II of Title III of the
Communications Act, the radio must be capable of
operating on the 156.800 MHz frequency.
on ships subject to the Safety Convention, the
radio must be capable of operating:
Note:
Additional information about operating
requirements in the Maritime Services can be
obtained from the full text of FCC Rule Part 80
and from the US Coast Guard.
Table 1: VHF Marine Channel List
Channel Number
146
English
Frequency (MHz)
Transmit
Receive
156.050
160.650
156.100
160.700
156.150
160.750
156.200
160.800
156.250
160.850
156.300
–
156.350
160.950
156.400
–
156.450
156.450
10
156.500
156.500
11
156.550
156.550
12
156.600
156.600
13**
156.650
156.650
14
156.700
156.700
15**
156.750
156.750
16
156.800
156.800
17**
156.850
156.850
af
Simplex channels 3, 21, 23, 61, 64, 81, 82,
and 83 cannot be lawfully used by the general
public in US waters.
161.500
66
156.325
160.925
19
156.950
161.550
67**
156.375
156.375
20
157.000
161.600
68
156.425
156.425
157.050
161.650
69
156.475
156.475
22
157.100
161.700
71
156.575
156.575
157.150
161.750
72
156.625
–
24
157.200
161.800
73
156.675
156.675
25
157.250
161.850
74
156.725
156.725
26
157.300
161.900
75
***
***
27
157.350
161.950
76
***
***
28
157.400
162.000
77**
156.875
–
60
156.025
160.625
78
156.925
161.525
156.075
160.675
79
156.975
161.575
62
156.125
160.725
80
157.025
161.625
63
156.175
160.775
157.075
161.675
156.225
160.825
157.125
161.725
65
156.275
160.875
157.175
161.775
af
Maritime Radio Use in the VHF Frequency Range
156.900
Dr
18
147
English
157.225
161.825
85
157.275
161.875
86
157.325
161.925
87
157.375
161.975
88
157.425
162.025
Note:
Dr
* Simplex channels 3, 21, 23, 61, 64, 81, 82,
and 83 cannot be lawfully used by the
general public in US waters.
*** Guard band.
Note:
A – in the Receive column indicates that the
channel is transmit only.
Declaration of Compliance for the Use of
Distress and Safety Frequencies
The radio equipment does not employ a modulation
other than the internationally adopted modulation for
148
English
Technical Parameters for Interfacing External
Data Sources
RS232
USB
SB9600
Input Voltage (Volts
Peak-topeak)
18V
3.6V
5V
Max Data
Rate
115 Kbps
12 Mbps
9.6 Kbps
5000 Ohm
90 Ohm
120 Ohm
af
** Low power (1 W) only.
maritime use when it operates on the distress and
safety frequencies specified in RSS-182 Section 7.3.
Impedance
Maritime Radio Use in the VHF Frequency Range
84
This glossary is a list of specialized terms used in this
manual.
Acknowledgment of
communication.
Active Channel
A channel that has traffic on it.
Analog Signal
An RF signal that has a
continuous nature rather than a
pulsed or discrete nature.
Dr
ACK
Automatic Registration Service
ASTRO 25
Motorola standard for wireless
digital trunked communications.
ASTRO
Conventional
Motorola standard for wireless
digital conventional
communications.
Privately page an individual by
sending an audible tone.
Carrier Squelch
Feature that responds to the
presence of an RF carrier by
opening or unmuting (turning
on) a receiver’s audio circuit. A
squelch circuit silences the
radio when no signal is being
received so that the user does
not have to listen to “noise”.
Central Controller A software-controlled,
computer-driven device that
receives and generates data
for the trunked radios assigned
to it. It monitors and directs the
operations of the trunked
repeaters.
Autoscan
A feature that allows the radio
to automatically scan the
members of a scan list.
AUX CH
Auxiliary Control Head
af
ARS
Call Alert
Glossary
Glossary
Channel
A group of characteristics such
as transmit/ receive frequency
pairs, radio parameters, and
encryption encoding.
CHIB
Control Head Interface Board
149
English
Control Channel
Conventional
Dr
A scan list that includes only
conventional channels.
CP
Codeplug
Cursor
A visual tracking marker (a
blinking line) that indicates a
location on the display.
Glossary
Digital Signal
An RF signal that has a pulsed,
or discrete, nature, rather than
a continuous nature.
Dispatcher
An individual who has radio
system management duties.
DSP
Digital Signal Processing
Dynamic
Regrouping
A feature that allows the
dispatcher to temporarily
reassign selected radios to a
single special channel so they
can communicate with each
other.
Displayed by the radio after
three failed attempts to unlock
the radio. The radio must be
powered off and on prior to
another attempt.
A type of coded squelch using
data bursts. Similar to PL
DVRS
Digital Private
Line (DPL)
except a digital code is used
instead of a tone.
af
English
Typically refers to radio-toradio communications,
sometimes through a repeater
(see Trunking).
Conventional
Scan List
Deadlock
150
In a trunking system, one of the
channels that is used to
provide a continuous, two-way/
data communications path
between the central controller
and all radios on the system.
Digital Vehicular Repeater
System
ESN
Electrical Serial Number
Failsoft
A feature that allows
communications to take place
even though the central
controller has failed. Each
trunked repeater in the system
transmits a data word informing
Federal Communications
Commission.
FM
Frequency Modulation
Hang Up
Disconnect.
Home screen
The first display information
after the radio completes its
self test.
KVL
Key-variable loader: A device
for loading encryption keys into
the radio.
LCD
Liquid crystal display.
LED
Light-emitting diode.
MCHB
Millennium Control Head Board
Menu Entry
A software-activated feature
shown at the bottom of the
display – selection of these
features is controlled by the
button.
Dr
FCC
Monitor
Check channel activity by
pressing the Monitor button. If
the channel is clear, you hear
static. If the channel is in use,
you hear conversation. It also
serves as a way to check the
volume level of the radio, since
the radio “opens the squelch”
when the monitor button is
pressed.
Multi-System
Talkgroup Scan
List
A scan list that can include
both talkgroups (trunked) and
channels (conventional).
af
Network Access
Code
Glossary
every radio that the system has
gone into failsoft.
Network Access Code (NAC)
operates on digital channels to
reduce voice channel
interference between adjacent
systems and sites.
Non-Tactical/
Revert
The user talks on a
preprogrammed emergency
channel. The emergency alarm
is sent out on this same
channel.
OTAR
Over-the-air rekeying.
151
English
A set of unique features
specific to a radio.
PIN
Personal Identification Number
Preprogrammed
Refers to a software feature
that has been activated by a
qualified radio technician.
Radio Frequency
(RF)
The part of the general
frequency spectrum between
the audio and infrared light
regions (about 10 kHz to
10,000,000 MHz).
Repeater
A conventional radio feature,
where you talk through a
receive/transmit facility that retransmits received signals, in
order to improve
communications range and
coverage.
Private
(Conversation)
Call
A feature that lets you have a
private conversation with
another radio user in the
talkgroup.
Private Line (PL)
A sub-audible tone that is
transmitted such that only
receivers decoding the tone
receives it.
Programmable
Refers to a radio control that
can have a radio feature
assigned to it.
PTT
Push-To-Talk. The PTT button
engages the transmitter and
puts the radio in transmit
Selective Call
Glossary
Personality
(send) operation when
pressed.
af
English
A one-way alert, with audio
and/or display messages.
Dr
152
Page
Selective Switch
A feature that allows you to call
a selected individual, intended
to provide privacy and to
eliminate the annoyance of
having to listen to
conversations of no interest to
you.
Any digital P25 traffic having
the correct Network Access
Code and the correct talkgroup.
Standby
An operating condition whereby
the radio’s speaker is muted
but still continues to receive
data.
Dr
Status Calls
Special electronic circuitry,
added to the receiver of a
radio, that reduces, or cuts off,
unwanted signals before they
are heard in the speaker.
Pre-defined text messages that
allow the user to send a
conditional message without
talking.
with each other using the same
communication path.
TMS
Text Messaging Service
Trunking
The automatic sharing of
communications paths between
a large number of users (see
Conventional).
Trunking Priority A scan list that includes
Monitor Scan List talkgroups that are all from the
same trunking system.
USK
Unique Shadow Key.
UTC
Coordinated Universal Time.
The international time standard
(formerly Greenwich Mean
Time, or GMT). Zero hours
UTC is midnight in Greenwich,
England, which is located at 0
degrees longitude. Everything
east of Greenwich (up to 180
degrees) is later in time;
everything west is earlier.
There are 42 time authorities
around the world that are
constantly synchronizing with
The user talks on the channel
that was selected before the
radio entered the emergency
state.
Talkaround
Bypass a repeater and talk
directly to another unit for easy
local unit-to-unit
communications.
Talkgroup
An organization or group of
radio users who communicate
af
Tactical/ NonRevert
Glossary
Squelch
153
English
each other. Abbreviated as
UTC (English backronym =
Universal Time, Coordinated),
it is also known as Zulu (Z)
Time.
VRS
Vehicular Repeater System
Zone
A grouping of channels.
Dr
Glossary
af
154
English
Limited Warranty
applicable warranty period. All replaced parts of
Product shall become the property of MOTOROLA.
Limited Warranty
MOTOROLA COMMUNICATION PRODUCTS
I. WHAT THIS WARRANTY COVERS AND FOR
HOW LONG:
Dr
MOTOROLA SOLUTIONS, INC. (“MOTOROLA”)
warrants the MOTOROLA manufactured
Communication Products listed below (“Product”)
against defects in material and workmanship under
normal use and service for a period of time from the
date of purchase as scheduled below:
One (1) Year
Product Accessories
One (1) Year
Unless made in a separate agreement between
MOTOROLA and the original end user purchaser,
MOTOROLA does not warrant the installation,
maintenance or service of the Product.
af
ASTRO APX Mobile Radios
This express limited warranty is extended by
MOTOROLA to the original end user purchaser only
and is not assignable or transferable to any other
party. This is the complete warranty for the Product
manufactured by MOTOROLA. MOTOROLA
assumes no obligations or liability for additions or
modifications to this warranty unless made in writing
and signed by an officer of MOTOROLA.
MOTOROLA, at its option, will at no charge either
repair the Product (with new or reconditioned parts),
replace it (with a new or reconditioned Product), or
refund the purchase price of the Product during the
warranty period provided it is returned in accordance
with the terms of this warranty. Replaced parts or
boards are warranted for the balance of the original
MOTOROLA cannot be responsible in any way for
any ancillary equipment not furnished by MOTOROLA
which is attached to or used in connection with the
Product, or for operation of the Product with any
ancillary equipment, and all such equipment is
expressly excluded from this warranty. Because each
system which may use the Product is unique,
MOTOROLA disclaims liability for range, coverage, or
operation of the system as a whole under this
warranty.
155
English
MOTOROLA offers the following optional extended
service contracts.
SERVICE FROM THE START (SfS)
COMPREHENSIVE
Dr
Provides for extended hardware repair coverage
INCLUDING CHEMICAL, LIQUID, FIRE, AND
OTHER PHYSICAL DAMAGE. Comprehensive
coverage is available in conjunction with
MOTOROLA’S standard Commercial Warranty and
starts from the FIRST DAY the radio is put into use.
Service performed under this plan consists of repair
or replacement of the covered equipment as set forth
in the terms and conditions. Repairs will be made only
at the designated MOTOROLA repair depot. Local
services are not included. MOTOROLA will pay the
inbound shipping charges only with use of the
MOTOROLA designated delivery service.
MOTOROLA will pay for outbound shipping via
MOTOROLA'S normal shipping methods.
and conditions. Repairs will be made only at the
designated MOTOROLA repair depot. Local services
are not included. MOTOROLA will pay for outbound
shipping via MOTOROLA'S normal shipping methods.
II. GENERAL PROVISIONS:
Limited Warranty
SERVICE FROM THE START (SfS) LITE
156
Provides extended hardware normal wear and tear
repair coverage beginning AFTER MOTOROLA’S
standard Commercial Warranty period expires.
Service performed under this plan consists of repair
of the covered equipment as set forth in the terms
English
af
This warranty sets forth the full extent of
MOTOROLA'S responsibilities regarding the Product.
Repair, replacement or refund of the purchase price,
at MOTOROLA’s option, is the exclusive remedy.
THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS,
LOST PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE SUCH PRODUCT, TO THE
III. STATE LAW RIGHTS:
Dr
SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LIMITATION ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION OR EXCLUSIONS MAY
NOT APPLY.
This warranty gives specific legal rights, and there
may be other rights which may vary from state to
state.
Limited Warranty
FULL EXTENT SUCH MAY BE DISCLAIMED BY
LAW.
warranty service. You can also call MOTOROLA at
1-800-927-2744 US/Canada.
V. WHAT THIS WARRANTY DOES NOT
COVER:
IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date
of purchase and Product item serial number) in order
to receive warranty service and, also, deliver or send
the Product item, transportation and insurance
prepaid, to an authorized warranty service location.
Warranty service will be provided by MOTOROLA
through one of its authorized warranty service
locations. If you first contact the company which sold
you the Product (e.g., dealer or communication
service provider), it can facilitate your obtaining
af
1 Defects or damage resulting from use of the
Product in other than its normal and customary
manner.
2 Defects or damage from misuse, accident, water,
or neglect.
3 Defects or damage from improper testing,
operation, maintenance, installation, alteration,
modification, or adjustment.
4 Breakage or damage to antennas unless caused
directly by defects in material workmanship.
5 A Product subjected to unauthorized Product
modifications, disassembles or repairs (including,
without limitation, the addition to the Product of
non-MOTOROLA supplied equipment) which
adversely affect performance of the Product or
interfere with MOTOROLA's normal warranty
inspection and testing of the Product to verify any
warranty claim.
6 Product which has had the serial number removed
or made illegible.
157
English
7 Rechargeable batteries if:
•
Limited Warranty
VI. PATENT AND SOFTWARE PROVISIONS:
158
MOTOROLA will defend, at its own expense, any suit
brought against the end user purchaser to the extent
that it is based on a claim that the Product or parts
infringe a United States patent, and MOTOROLA will
English
11
1 that MOTOROLA will be notified promptly in
writing by such purchaser of any notice of such
claim,
2 that MOTOROLA will have sole control of the
defense of such suit and all negotiations for its
settlement or compromise, and
3 should the Product or parts become, or in
MOTOROLA’s opinion be likely to become, the
subject of a claim of infringement of a United
States patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to
procure for such purchaser the right to continue
using the Product or parts or to replace or modify
the same so that it becomes non-infringing or to
grant such purchaser a credit for the Product or
parts as depreciated and accept its return. The
depreciation will be an equal amount per year over
the lifetime of the Product or parts as established
by MOTOROLA.
af
10
Dr
any of the seals on the battery enclosure of
cells are broken or show evidence of
tampering.
• the damage or defect is caused by charging or
using the battery in equipment or service other
than the Product for which it is specified.
Freight costs to the repair depot.
A Product which, due to illegal or unauthorized
alteration of the software/firmware in the Product,
does not function in accordance with
MOTOROLA’s published specifications or the FCC
certification labeling in effect for the Product at the
time the Product was initially distributed from
MOTOROLA.
Scratches or other cosmetic damage to Product
surfaces that does not affect the operation of the
Product.
Normal and customary wear and tear.
pay those costs and damages finally awarded against
the end user purchaser in any such suit which are
attributable to any such claim, but such defense and
payments are conditioned on the following:
MOTOROLA will have no liability with respect to any
claim of patent infringement which is based upon the
Dr
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights for
copyrighted MOTOROLA software such as the
exclusive rights to reproduce in copies and distribute
copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the
software was originally embodied and such software
in such Product may not be replaced, copied,
distributed, modified in any way, or used to produce
any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction,
distribution, or reverse engineering of such
MOTOROLA software or exercise of rights in such
MOTOROLA software is permitted. No license is
granted by implication, estoppel or otherwise under
MOTOROLA patent rights or copyrights.
Limited Warranty
combination of the Product or parts furnished
hereunder with software, apparatus or devices not
furnished by MOTOROLA, nor will MOTOROLA have
any liability for the use of ancillary equipment or
software not furnished by MOTOROLA which is
attached to or used in connection with the Product.
The foregoing states the entire liability of
MOTOROLA with respect to infringement of patents
by the Product or any parts thereof.
VII. GOVERNING LAW:
This Warranty is governed by the laws of the State of
Illinois, U.S.A.
VIII. For Australia Only
This warranty is given by Motorola Solutions Australia
Pty Limited (ABN 16 004 742 312) of Tally Ho
Business Park, 10 Wesley Court. Burwood East,
Victoria.
af
Our goods come with guarantees that cannot be
excluded under the Australia Consumer Law. You are
entitled to a replacement or refund for a major failure
and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
Motorola Solutions Australia’s limited warranty above
is in addition to any rights and remedies you may
have under the Australian Consumer Law. If you have
any queries, please call Motorola Solutions Australia
at 1800 457 439. You may also visit our website:
http://www.motorolasolutions.com/XA-EN/Pages/
Contact_Us for the most updated warranty terms.
159
English
SERVICE
Dr
Proper repair and maintenance procedures will
assure efficient operation and long life for this
product. A Motorola maintenance agreement will
provide expert service to keep this and all other
communication equipment in perfect operating
condition. A nationwide service organization is
provided by Motorola to support maintenance
services. Through its maintenance and installation
program, Motorola makes available the finest service
to those desiring reliable, continuous communications
on a contract basis. For a contract service agreement,
please contact your nearest Motorola service or sales
representative, or an authorized Motorola dealer.
Limited Warranty
160
English
af
Express Service Plus (ESP) is an optional extended
service coverage plan, which provides for the repair
of this product for a period of three years from the
date of shipment from the factory, or the date of
delivery if purchased from an authorized Motorola
two-way radio dealer. For more information about
ESP, contact the Motorola Radio Support Center,
2204 Galvin Drive, Elgin, IL 60123, 1-800-227-6772.
t
af
Dr
Motorola Solutions, Inc.
1303 East Algonquin Road
Schaumburg, Illinois 60196 U.S.A.
Dr
af
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and
the Stylized M logo are trademarks or registered trademarks
of Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners.
© 2012–2016 Motorola Solutions, Inc. All rights reserved.
*6875947M01*
6875947M01-HC

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Create Date                     : 2016:09:05 21:41:14-05:00
Creator                         : AH XSL Formatter V6.1 MR1 for Linux64 : 6.1.6.12100 (2013/07/19 17:47JST)
Modify Date                     : 2016:09:13 16:29:22+08:00
Has XFA                         : No
Language                        : EN
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Creator Tool                    : AH XSL Formatter V6.1 MR1 for Linux64 : 6.1.6.12100 (2013/07/19 17:47JST)
Metadata Date                   : 2016:09:13 16:29:22+08:00
Producer                        : Antenna House PDF Output Library 6.1.420 (Linux64)
Trapped                         : False
Format                          : application/pdf
Title                           : APX TWO-WAY RADIOS
Document ID                     : uuid:2212f37c-5ff5-48ce-9929-53c4045edcc0
Instance ID                     : uuid:dd010417-7389-4660-8da4-58e565c0a5c1
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 164
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AZ492FT7118

Navigation menu