Motorola Solutions 92FT7118 Mobile 2-Way Radio with WiFi User Manual Quick Reference Guide
Motorola Solutions, Inc. Mobile 2-Way Radio with WiFi Quick Reference Guide
Contents
Quick Reference Guide
Radio On/Off ASTRO® APX™ O5 Control Head Mobile Radio Quick Reference Card RF Energy Exposure and Product Safety Guide for Mobile Two-Way Radios ATTENTION! This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Mobile Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. Radio Controls Volume Knob Dim Button Home Button Power On/Off Button Indicators * The duration that user must press and hold the Power On/Off button to turn off the radio is programmable by a qualified radio technician. Adjusting Volume Orange Button 1 > or < to ZONE. Take the microphone off hook. Select zone/channel. Listen for a transmission. OR Turn the Volume Knob. OR > or < to MON then press the Menu Select button directly below MON and listen for activity. Adjust volume, if necessary. Press the PTT button to transmit; release to receive. 2 > or < button until the desired zone is displayed. Press H or the PTT button to confirm the selected zone number. Sending an Emergency Alarm Press the Emergency button. A tone sounds and the display alternates EMERGENCY and the home display. A dispatcher acknowledgment ACK RECEIVED display follows. AND, Trunking Only: A high-pitched tone indicates that the alarm has been received by the trunked system’s central controller. Press and hold the emergency button or the PTT button to return to normal operation. Press the PTT button to begin transmitting on the displayed zone channel. Selecting a Channel LED Indicators Menu Entries Menu Select Button Accessory Port (Microphone) Navigation Button Press the PTT button to transmit on the displayed zone channel. Receiving and Transmitting Turn the Volume Knob clockwise to increase volume or counterclockwise to decrease the volume. Selecting a Zone Mode Knob Press the Power On/Off button to toggle the power on or off.* Press and hold > to scroll to CHAN and press the Menu Select button directly below CHAN. The display shows the current zone and channel. Rotate the Mode knob to the desired channel. Press H or the PTT button to confirm the channel. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2009–2011, 2013, 2015 by Motorola Solutions, Inc. All Rights Reserved. 06/15 1303 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A. To exit emergency at any time, press and hold the Emergency button. *PMLN5592G* PMLN5592G English Sending an Emergency Call (Trunking Only) Press Emergency button. A tone sounds and the display alternates EMERGENCY and the home display. OR A talk prohibited tone sounds when the selected channel does not support emergency. Press and hold the PTT button. Speak clearly into the microphone. Release the PTT to end the transmission. To exit emergency at any time, press and hold the Emergency button. Sending a Silent Emergency Alarm Press the preprogrammed Emergency button to activate the silent alarm feature. The display does not change; the LED does not light up, and there is no tone. Direct radio-to-radio communication or communication through a repeater. On = Direct Off = Repeater On = Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call. This channel is being monitored. Voice muting the affiliated trunking talkgroup or selected conventional channel. On = Enabled Off = Disabled On = AES Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call. On = Location feature enabled, and location signal available. Off = Location feature disabled. Blinking = Location feature enabled, but location signal unavailable. On = User is currently associated with the radio. Off = User is currently not associated with the radio. Blinking = Device registration or user registration with the server failed due to an invalid username or pin. H . OR L = Radio is set at Low power. H = Radio is set at High power. Scanning a scan list. Blinking dot = Detects activity on the Priority-One Channel during scan. Steady dot = Detects activity on the PriorityTwo Channel during scan. The vote scan feature is enabled. If silent emergency alarm is used with emergency call, pressing the PTT button exits the silent mode and initiates the emergency call. Data activity is present. Indicates that the text entry is currently in hexadecimal mode. Display Status Icons Receiving a call or data. Transmitting a call or data. The more stripes, the stronger the signal strength for the current site (trunking only). English Menu Navigation < or > to Menu Entry. g directly below Menu Entry to select. < or > to scroll through sub-list. H to exit. g directly below Menu Entry to select.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : APX O5 Control Head Mobile Radio Quick Reference Card Creator : Motorola Solutions - GCD Penang Description : Quick Reference Card Create Date : 2008:12:10 15:08:16Z Creator Tool : FrameMaker 8.0 Modify Date : 2015:03:23 16:07:46Z Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:1fc62a59-a371-4c1b-bcde-437f781dd6ac Instance ID : uuid:484ad803-4af0-479e-93e4-a7152dd7c7f6 Page Mode : UseNone Page Count : 2 Author : Motorola Solutions - GCD Penang Subject : Quick Reference CardEXIF Metadata provided by EXIF.tools