Motorola Solutions 99FT3045 CP200 VHF Portable Radio User Manual 309N60 O cvr

Motorola Solutions, Inc. CP200 VHF Portable Radio 309N60 O cvr

Contents

Ex 8a Users Manual

Commercial SeriesTwo-Way Radio User GuideFrench goes hereCP200MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2002. All rights reserved. Printed in U.S.A.Motorola, Le logo stylisé M, et intelligence universelle sont des marques de Motorola, Inc.© 2002 Motorola, Inc. Tous droits réservés. Imprimé aux États-Unis.*6880309N60*6880309N60-O309N60-O_cvr.qxd  9/12/2002  10:56 AM  Page 1
1EnglishCONTENTSCONTENTSComputer Software Copyrights . . . . . . . . . . 2Safety and Warranty . . . . . . . . . . . . . . . . . 3Product Safety and RF ExposureCompliance. . . . . . . . . . . . . . . . . . . . . . . . 3Battery Information . . . . . . . . . . . . . . . . . . . 3Charging Batteries . . . . . . . . . . . . . . . . . 3Limited Warranty . . . . . . . . . . . . . . . . . . . . . 4Radio Overview . . . . . . . . . . . . . . . . . . . . . 9Parts of the Radio . . . . . . . . . . . . . . . . . . . . 9CP200™ Model . . . . . . . . . . . . . . . . . . . 9On/Off/Volume Knob . . . . . . . . . . . . . . 10Channel Selector Knob  . . . . . . . . . . . . 10Push-to-Talk (PTT) Button . . . . . . . . . . 10Microphone  . . . . . . . . . . . . . . . . . . . . . 10LED Indicator . . . . . . . . . . . . . . . . . . . . 10Programmable Buttons  . . . . . . . . . . . . 11Indicator Tones . . . . . . . . . . . . . . . . . . . . . 13Audio Indicators for ProgrammableButtons . . . . . . . . . . . . . . . . . . . . . . . . . . 13Improved Audio Features . . . . . . . . . . . . . 14Companding. . . . . . . . . . . . . . . . . . . . . 14Getting Started  . . . . . . . . . . . . . . . . . . . . 15Battery Information . . . . . . . . . . . . . . . . . . 15Charging Your Battery . . . . . . . . . . . . . 15Wall Charger  . . . . . . . . . . . . . . . . . . . . 15Desktop Charger . . . . . . . . . . . . . . . . . 16Accessory Information  . . . . . . . . . . . . . . . 17Attaching the Battery . . . . . . . . . . . . . . 17Removing the Battery . . . . . . . . . . . . . 17Attaching the Antenna . . . . . . . . . . . . . 18Removing the Antenna . . . . . . . . . . . . 18Attaching the Belt Clip . . . . . . . . . . . . . 19Removing the Belt Clip . . . . . . . . . . . . 19Turning the Radio On or Off . . . . . . . . . . . 20Adjusting the Volume . . . . . . . . . . . . . . . . 20Selecting a Radio Channel . . . . . . . . . . . . 20Sending a Call  . . . . . . . . . . . . . . . . . . . . . 21Receiving a Call . . . . . . . . . . . . . . . . . . . . 21Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . 21Radio Calls  . . . . . . . . . . . . . . . . . . . . . . . 23Repeater or Talkaround Mode . . . . . . . . . 23Setting Tight or Normal Squelch. . . . . . . . 23Setting the Power Level . . . . . . . . . . . . . . 23Receiving a Selective Call  . . . . . . . . . . . . 24Receiving a Call Alert Page . . . . . . . . . . . 24Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Starting or Stopping Scan. . . . . . . . . . . . . 25Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . 25Deleting a Nuisance Channel . . . . . . . . . . 25Restoring a Channel to the Scan List . 25Prioritizing a Scan List Member . . . . . . . . 26Non-displayTOC.fm  Page 1  Thursday, September 19, 2002  4:59 PM
2EnglishCONTENTSAccessories  . . . . . . . . . . . . . . . . . . . . . . 27Carry Accessories. . . . . . . . . . . . . . . . . . . 27Chargers. . . . . . . . . . . . . . . . . . . . . . . . . . 27Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 27Headsets  . . . . . . . . . . . . . . . . . . . . . . . . . 28Surveillance Accessories . . . . . . . . . . . . . 28Remote Speaker Microphones . . . . . . . . . 29Antennas  . . . . . . . . . . . . . . . . . . . . . . . . . 29COMPUTER SOFTWARE COPYRIGHTSThe Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product.Non-displayTOC.fm  Page 2  Thursday, September 19, 2002  4:59 PM
3EnglishSAFETY AND WARRANTYSAFETY AND WARRANTYPRODUCT SAFETY AND RF EXPOSURE COMPLIANCEATTENTION!  This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68P81095C98) to ensure compliance with RF energy exposure limits.  For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/cgiss/index.shtml.BATTERY INFORMATIONCharging BatteriesThis product is powered by a nickel-cadmium (NICd) or lithium-ion (Lilon) rechargeable battery. Charge the battery before use to ensure optimum capacity and performance. The battery was designed specifically to be used with a Motorola charger. Charging in non-Motorola equipment may lead to battery damage and void the battery warranty.Note: When charging a battery attached to a radio, turn the radio off to ensure a full charge.The battery should be at about 77°F (25°C) (room temperature), whenever possible. Charging a cold battery (below 50° F [10°C]) may result in leakage of electrolyte and ultimately in failure of the battery. Charging a hot battery (above 95°F [35°C]) results in reduced discharge capacity, affecting the performance of the radio. Motorola rapid-rate battery chargers contain a temperature-sensing circuit to ensure that batteries are charged within the temperature limits stated above.Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio.!C a u t i o n10_SafetyNA..fm  Page 3  Thursday, September 19, 2002  4:59 PM
4EnglishSAFETY AND WARRANTYLIMITED WARRANTYMOTOROLA COMMUNICATION PRODUCTSI. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:MOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA manufactured Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:CP200 Portable Unit One (1) YearProduct Accessories One (1) YearMotorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.10_SafetyNA..fm  Page 4  Thursday, September 19, 2002  4:59 PM
5EnglishSAFETY AND WARRANTYII. GENERAL PROVISIONS:This warranty sets forth the full extent of MOTOROLA's responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLA’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. STATE LAW RIGHTS:SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state.IV. HOW TO GET WARRANTY SERVICE:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola at 1-800-927-2744 US/Canada.10_SafetyNA..fm  Page 5  Thursday, September 19, 2002  4:59 PM
6EnglishSAFETY AND WARRANTYV. WHAT THIS WARRANTY DOES NOT COVER:A Defects or damage resulting from use of the Product in other than its normal and customary manner.B Defects or damage from misuse, accident, water, or neglect.C Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.D Breakage or damage to antennas unless caused directly by defects in material workmanship.E A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorola's normal warranty inspection and testing of the Product to verify any warranty claim.F Product which has had the serial number removed or made illegible.G Freight costs to the repair depot.H A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’s published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.I Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product.J Normal and customary wear and tear.VI. PATENT AND SOFTWARE PROVISIONS:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:A that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;10_SafetyNA..fm  Page 6  Thursday, September 19, 2002  4:59 PM
7EnglishSAFETY AND WARRANTYB that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; andC should the Product or parts become, or in MOTOROLA’s opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.VII. GOVERNING LAW:This Warranty is governed by the laws of the State of Illinois, USA.10_SafetyNA..fm  Page 7  Thursday, September 19, 2002  4:59 PM
8EnglishSAFETY AND WARRANTYNotes:10_SafetyNA..fm  Page 8  Thursday, September 19, 2002  4:59 PM
9EnglishRADIO OVERVIEWRADIO OVERVIEW PARTS OF THE RADIOCP200™ Model(programmable)Side Button 1Push-to-Talk(PTT) Button(programmable)Side Button 2 Accessory Connectorwith a Dust CoverLED IndicatorOn/Off/VolumeKnobChannel SelectorKnobMicrophone03_Overview.fm  Page 9  Thursday, September 19, 2002  5:01 PM
10EnglishRADIO OVERVIEWOn/Off/Volume KnobTurns the radio on or off, and adjusts the radio’s volume.Channel Selector KnobSwitches the radio to different channels.Push-to-Talk (PTT) ButtonPress and hold down this button to talk; release it to listen.MicrophoneWhen sending a message, hold the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth, and speak clearly into it.LED IndicatorIndicates power-up, TX, RX, scan status, Call Alert™, Selective Call, and battery status.Basic FeaturesLED State/Color IndicationRadio CallRed Sending messageFlashing Red Receiving messageScanFlashing Green Scanning for activityCall AlertDouble FlashYellow Indicates receiving Call AlertSelective CallDouble FlashYellow Indicates receiving Select CallSticky MonitorYellow While monitoring and upon channel changeLow BatteryFlashing Red when sending message Low battery level03_Overview.fm  Page 10  Thursday, September 19, 2002  5:01 PM
11EnglishRADIO OVERVIEWBattery Charge StatusYou can check battery charge status by holding down the preprogrammed Battery Gauge button. The charge status is shown by the color of the radio’s LED indicator.  Programmable ButtonsThe two side buttons on your radio can be programmed by your dealer as shortcuts to various radio features.Check with your dealer for a complete list of functions your radio supports.Each button can be programmed to select features, depending on the type of button press:•short press — quickly pressing and releas-ing the programmable buttons•long press — pressing and holding the programmable buttons for a period of time (default 1 1/2 seconds or programmed value) before releasing•hold down — pressing and holding down the programmable buttons while checking status or making adjustmentsDepending on how your radio has been programmed by your dealer, these functions are activated EITHER through a short press OR a long press, but NOT both.A summary of programmable radio features and corresponding page references appears beginning on page 12.In the “Feature” column, have your dealer write down the programmable buttons next to the features that have been programmed to them.BatteryLevel LEDIndicatorHigh GreenSufficient YellowLow Flashing RedVery Low None03_Overview.fm  Page 11  Thursday, September 19, 2002  5:01 PM
12EnglishRADIO OVERVIEWFeature Short Press/Long Press Hold Down Page ButtonBattery Gauge — Checks the battery charge status. 11StickyPermanent MonitorA long press of the Monitor button initiates. A short press of the Moni-tor button cancels. Monitors the selected channel for any activity. 21Volume Set Sounds a tone for adjusting the radio’s volume level. 20Power Level Toggles your radio’s transmit power level between High and Low power. —23Repeater/TalkaroundToggles between using a repeater and transmitting directly to another radio. —23Squelch Toggles your radio’s squelch level between tight and normal squelch. —23Scan Starts or stops the Scan operation. — 25Nuisance Channel DeleteDeletes a nuisance channel while scanning. —2503_Overview.fm  Page 12  Thursday, September 19, 2002  5:01 PM
13EnglishRADIO OVERVIEWINDICATOR TONESHigh pitched tone   Low pitched tone AUDIO INDICATORS FOR PROGRAMMABLE BUTTONSSome programmable buttons use tones to indicate one of two modes:Self Test Pass ToneSelf Test Fail TonePositive Indicator ToneNegative Indicator Tone Button Positive Indicator Tone Negative Indicator ToneScan Start scan Stop scanPower Level High power selected Low power selectedSquelch Tight squelch Normal squelchRepeater/Talkaround Does not use  repeater Uses repeater03_Overview.fm  Page 13  Thursday, September 19, 2002  5:01 PM
14EnglishRADIO OVERVIEWIMPROVED AUDIO FEATURESCompandingCompanding is a feature that allows further improvement of voice quality. It compresses your voice at transmission, and expands it when receiving while simultaneously reducing extraneous noise. However, to enjoy this benefit, all transmitting and receiving radios must have this feature activated.03_Overview.fm  Page 14  Thursday, September 19, 2002  5:01 PM
15EnglishGETTING STARTEDGETTING STARTEDBATTERY INFORMATIONCharging Your BatteryIf a battery is new, or its charge level is very low, you will need to charge it before you can use it. When the battery level is low and the radio is in transmit mode you will see the LED indicator flash red. Upon release of the PTT button, you will hear an alert tone.Note: Batteries are shipped uncharged from the factory. Always charge a new battery 14 to 16 hours before initial use, regardless of the status indicated by the charger.Note: Do not use the wall charger and desktop charger at the same time when charging.Wall ChargerNote: Do not use the wall charger if using a lithium-ion battery. The wall charger is for nickel-cadmium (NiCd) batteries only.To Charge the Battery1Turn the radio off.2Lift the dust cover to expose the audio accessory connector.3Insert the charging adapter into the accessory connector.4Plug the charging adapter into an electrical outlet.• The LED on the charging adapter lights Red while the charger is plugged into an electrical outlet.Note: Do not leave the charger connected to the radio when it is not connected to the electrical outlet.5Unplug the charger from the electrical outlet and radio after 10 hours.Note: After the initial charge of 14 to 16 hours, do not charge the battery more than 10 hours. 04_GetStarted.fm  Page 15  Friday, September 20, 2002  9:45 AM
16EnglishGETTING STARTEDDesktop ChargerTo Charge the BatteryA list of Motorola authorized batteries and battery chargers appears on page 27. The listed chargers will charge only Motorola authorized batteries. Other batteries may not charge.1Turn the radio off.2Place the battery, with or without the radio, in the charger pocket. • The charger LED indicates the charging progress.LED color StatusNo LED Indication Battery inserted incorrectly or battery not detected.Single Green Flash  Successful charger power-up.Flashing Red*Battery unchargeable or not making proper contact.Red Battery is charging.Flashing Yellow Battery in charger but wait-ing to be charged. The bat-tery temperature may be too hot or too cold. The voltage may be lower than the pre-determined threshold level for charging.Flashing Green†Battery 90% (or more) charged.Green Battery fully charged.* Remove the battery from the charger and use a pencil eraser to clean the three metal contacts at the back of the battery. Place the battery back in the charger. If the LED indicator continues to flash red, replace the battery.† A standard battery may require 90 minutes to charge to 90% capacity.LED color Status04_GetStarted.fm  Page 16  Friday, September 20, 2002  9:45 AM
17EnglishGETTING STARTEDACCESSORY INFORMATIONAttaching the BatteryRemoving the Battery1Align the battery to the battery rails on the back of the radio (approximately 1/2 in. from the top of the radio.)2Press the battery firmly to the radio and slide the battery upward until the latch snaps into place.3Slide the battery latch, located on radio bottom,  into the lock position.1Turn off the radio if it is turned on (see page 20).2Slide the battery latch into the unlock position. Disengage by pushing downward and holding the latch towards the front of the radio.3With the battery latch disengaged, slide the battery down from the top of the radio about 1/2 in. Once the battery is free from the battery rails, lift it directly away from the radio.Battery Latch04_GetStarted.fm  Page 17  Friday, September 20, 2002  9:45 AM
18EnglishGETTING STARTEDAttaching the Antenna Removing the AntennaTurn the antenna clockwise to attach it. Turn the antenna counter-clockwise to remove it.04_GetStarted.fm  Page 18  Friday, September 20, 2002  9:45 AM
19EnglishGETTING STARTEDAttaching the Belt Clip Removing the Belt Clip1Align the grooves of the belt clip with those of the battery.2Press the belt clip downward until you hear a click.1Use a key to press the belt clip tab away from the battery to unlock the belt clip.2Slide the belt clip upward to remove it.Belt Clip Tab04_GetStarted.fm  Page 19  Friday, September 20, 2002  9:45 AM
20EnglishGETTING STARTEDTURNING THE RADIO ON OR OFF ADJUSTING THE VOLUMESELECTING A RADIO CHANNELYour radio offers 4 or 16 channels.Note: Due to government regulations, some channels may not be programmed. Ask your dealer for more information.To select a channel, turn the Channel Selector knob clockwise or counterclockwise until you reach the desired channel.Turn the On/Off/Volume Control knob clockwise. If power-up is successful, you will hear the Self-Test Pass Tone ( ) and see the LED flash green. If the radio fails to power up, you will hear the Self Test Fail Tone (). Turn the On/Off/Volume Control knob counter-clockwise until you hear a click.ON OFF1Hold down the Volume Set button (see page 12); you will hear a continuous tone.2Turn the On/Off/Volume Control knob to the desired volume level.3Release the Volume Set button.04_GetStarted.fm  Page 20  Friday, September 20, 2002  9:45 AM
21EnglishGETTING STARTEDSENDING A CALLRECEIVING A CALLMONITORINGIt is important to monitor traffic before transmitting to ensure that you do not “talk over” someone who is already transmitting.1Turn your radio on.2Use the Channel Selector knob to select the desired channel.3Hold the radio in a vertical position, press the PTT, and talk at a distance of about 1 to 2 inches (2.5 to 5 cm) from the microphone.4Release the PTT to listen.1Turn your radio on.2Adjust the radio’s volume (see page 20).3Switch to the desired channel. To respond, hold the radio in a vertical position, press the PTT, and talk at a distance of about 1 to 2 inches (2.5 to 5 cm) from the microphone.1Momentarily press the preprogrammed Monitor button to access channel traffic.2Once channel traffice has cleared, proceed with your call by pressing the PTT button.3To place the radio in open squelch mode, press and hold the preprogrammed Monitor button until you hear a high-pitched tone.Momentarily press the Monitor button to return to normal operation.04_GetStarted.fm  Page 21  Friday, September 20, 2002  9:45 AM
22EnglishGETTING STARTEDNotes:04_GetStarted.fm  Page 22  Friday, September 20, 2002  9:45 AM
23EnglishRADIO CALLSRADIO CALLSREPEATER OR TALKAROUND MODETalkaround Mode enables you to communicate with another radio when either:• the repeater is not operating—or—• your radio is out of the repeater’s range but within communicating distance of another radio.Press the preprogrammed Repeater/Talkaround button (see page 12) to toggle between Repeater mode and Talkaround Mode.SETTING TIGHT OR NORMAL SQUELCHUse this feature to filter out nuisance (unwanted) calls and/or background noise. However, tightening squelch could cause calls from remote locations to be filtered out as well. In this case, normal squelch may be more desirable.Press the preprogrammed Squelch button (see page 12) to toggle between tight and normal squelch.SETTING THE POWER LEVELEach channel in your radio has a predefined transmit power level that can be changed.•High power allows you to reach a radio that is farther away.•Low power conserves the battery’s charge.Press the preprogrammed Power Level button (see  page 12) to toggle between low and high power.05_RadioCall.fm  Page 23  Thursday, September 19, 2002  5:11 PM
24EnglishRADIO CALLSRECEIVING A SELECTIVE CALLWhen you receive a selective call:• The LED indicator flashes yellow, if pro-grammed by your dealer. • You hear two alert tones.To answer the call, press the PTT button.RECEIVING A CALL ALERT PAGEWhen you receive a Call Alert page:• The LED indicator flashes yellow, if pro-grammed by your dealer. • You hear a recurring set of tones.To answer the page, press the PTT button; to cancel the page, press any other key.05_RadioCall.fm  Page 24  Thursday, September 19, 2002  5:11 PM
25EnglishSCANSCANYou can monitor multiple channels and receive any calls that are transmitted on them. Channels can be programmed into a scan list by your dealer. Your radio automatically switches to a scan list channel when it detects activity on it.STARTING OR STOPPING SCANThe LED indicator blinks green during a scan operation and stops blinking when the radio switches to a channel.To start or stop a scan operation, press the preprogrammed Scan button (see page 12).TALKBACKIf the Talkback option is preprogrammed, you can respond to any calls received during the scan operation. To respond, press the PTT before the programmed hangtime elapses. Otherwise, the radio will continue scanning. Check with your dealer for details.DELETING A NUISANCE CHANNELNote: Your dealer must have preprogrammed a button to Nuisance Delete (see page 12) to access this feature.If a channel continually generates unwanted calls or noise (a “nuisance” channel), you can temporarily remove it from the scan list:Note: You cannot delete a priority channel or last remaining channel in the scan list.Restoring a Channel to the Scan List1While the radio is on the Nuisance Channel, press the preprogrammed Nuisance Channel Delete button until you hear a tone.2Release the Nuisance Channel Delete button. The nuisance channel is deleted.1Press the Scan button to stop the scan.2Press the Scan button again to start scanning again. The Deleted Nuisance Channel is restored to the scan list.06_Scan.fm  Page 25  Thursday, September 19, 2002  5:12 PM
26EnglishSCANPRIORITIZING A SCAN LIST MEMBERYou may want your radio to scan a specific channel more frequently for calls. Your dealer can prioritize scan list members for you. Check with your dealer for details.Even though your radio has switched to a non-priority channel, it will still check for activity on the priority channel. If activity is detected, the radio will switch to the priority channel.Priority Channel Scanning SequenceNone specified Ch1➠Ch2➠Ch3➠Ch4➠...Ch1Channel 2Ch2➠Ch1➠Ch2➠Ch3➠Ch2➠Ch4➠Ch2➠...Ch106_Scan.fm  Page 26  Thursday, September 19, 2002  5:12 PM
27EnglishACCESSORIESACCESSORIESMotorola offers a number of accessories to enhance the productivity of your two-way radio. Many of the available accessories are listed below. For a complete list, see your Motorola dealer.CARRY ACCESSORIES CHARGERSBATTERIESHLN9701 Nylon Case with Belt Loop and D-Shaped RingsRLN5383 Hard Leather Case with Belt Loop and D-Shaped RingsRLN5384 Hard Leather Case with High Activity 2-1/2 inch Swivel Belt LoopRLN5385 Hard Leather Case with High Activity 3 inch Swivel Belt LoopPMLN4124 2-1/2 inch Belt ClipHLN8255 Spring 3 inch Belt ClipHLN6602 Universal Chest Pack15-05596Z02 Replacement Strap for HLN6602 Universal Chest PackRLN4570 Universal Break-A-Way Chest PackRLN4815 Universal RadioPak42-80384F89 Replacement Belt Lengthener for RLN4815 Universal RadioPakNTN5243 Shoulder Strap for Hard Leather Cases (attaches to D-Shaped Rings on case)RLN4904 Mic Jacket for HMN9030 Remote Speaker MicrophoneWPLN4137 Desktop Charger BaseWPLN4138 Desktop Charger w/US NA PlugNNTN4497_R Lilon, 1800 maHNNTN4496_R NiCd, 1100 maH11_Accessory.fm  Page 27  Thursday, September 19, 2002  5:12 PM
28EnglishACCESSORIESHEADSETS SURVEILLANCE ACCESSORIESRLN5411 Ultra-Lite Breeze Behind the Head HeadsetHMN9013 Lightweight HeadsetRMN4016 Lightweight Headset with In-line PTTRLN5238 Lightweight Headset with In-line PTT, NFL StyleHMN9021 Medium Weight Over the Head Dual Muff HeadsetHMN9022 Medium Weight Behind the Head Dual Muff HeadsetBDN6647 Medium Weight Single Speaker Headset50-80371E66 Replacement Ear Pad for BDN6647BDN6648 Heavy Duty Dual Muff Headset with Noise Canceling MicrophoneRMN5015 Heavy Duty Dual Muff Racing Headset (requires RKN4090 Headset Adapter Cable)REX4648 Ear Pad and Windscreen KitRKN4090 In-Line PTT Adapter (use with RMN5015)HMN9752 Earpiece with Volume Control, 1-Wire (plastic earloop) (Beige)HMN9727 Earpiece without Volume Control, 1-Wire (plastic earloop) (Beige)RLN4894 Earpiece without Volume Control, 1-Wire (plastic earloop) (Black)HMN9754 Earpiece with Micrphone & PTT Combined, 2-Wire (Beige)RLN4895 Earpiece with Micrphone & PTT Combined, 2-Wire (Black)RLN5198 Earpiece with Microphone & PTT Combined, 2-Wire Surveillance Kit w/Clear Comfortable Acoustic Tube (includes NTN8371)BDN6720 Flexible Ear Receiver (RX only)HMN9036 Earbud with Microphone & PTT Combined, 2-Wire (Black)HLN9132 Earbud Single Wire Receive OnlyNTN8370 Extreme Noise KitNTN8371 Low Noise KitRLN4760 Small Custom Clear Earpiece,Right EarRLN4763 Small Custom Clear Earpiece,Left Ear11_Accessory.fm  Page 28  Thursday, September 19, 2002  5:12 PM
29EnglishACCESSORIESREMOTE SPEAKER MICROPHONESANTENNASRLN4761 Medium Custom Clear Earpiece, Right EarRLN4764 Medium Custom Clear Earpiece,Left EarRLN4762 Large Custom Clear Earpiece,Right EarRLN4765 Large Custom Clear Earpiece,Left EarHMN9030 Remote Speaker MicrophoneNAD6502 VHF Heliflex Antenna 14cm, 146-174 MHzHAD9742 VHF Stubby Antenna, 9cm,146-162 MHzHAD9743 VHF Stubby Antenna, 9cm,162-174 MHz85-05816K25 UHF Heliflex Stubby Antenna 9cm, 438-470 MHzNAE6483 Flexible Whip Antenna, 403-520 MHz11_Accessory.fm  Page 29  Thursday, September 19, 2002  5:12 PM
30EnglishACCESSORIESNotes:11_Accessory.fm  Page 30  Thursday, September 19, 2002  5:12 PM
CP200 Quick Reference CardNOTE: Enter the functions for your radio’s two programmable buttons in the boxes provided above. SP represents Short Press, while LP represents Long Press.LED IndicatorsLED State/Color IndicationRadio CallRedFlashing RedSending messageReceiving messageScanFlashing Green Scanning for activityLow BatteryFlashing Red when sending messageLow battery levelCall AlertDouble Flash Yell owIndicates receiving a Call AlertSelect CallDouble Flash Yell owIndicates receiving a Selective CallSticky MonitorYell owWhile monitoring and upon channel change.Battery Charge StatusGreenYell owFlashing RedNoneHighSufficientLowVery LowMicrophonePTT2SP:LP:1SP:LP:LEDIndicatorChannel Selector KnobOn/Off/Volume Knob12_QR-Card.fm  Page 31  Thursday, September 19, 2002  5:17 PM
Turning On the Radio• Turn On/Off/Volume Control knob clockwise. If the radio successfully powers up, you will hear the Self Test Pass tone and see the LED light green. If the radio fails to power up, you will hear the Self Test Fail tone.Turning Off the Radio• Turn On/Off/Volume Control knob counter-clockwise until you hear a click.Adjusting the Radio Volume1. Press and hold Volume Set button (preprogrammed by your dealer) until you hear a continuous tone.2. Turn On/Off/Volume Control knob to adjust volume level.3. Release Volume Set button at desired volume level.Selecting a Radio Channel• Turn Channel Selector knob clockwise or counter-clockwise to reach desired channel.Sending a Call1. With radio on, turn Channel Selector knob to required channel.2. Press PTT and speak clearly with mouth about 2.5 to 5 cm (1 to 2 inches) away from microphone.3. Release PTT when call is completed.Receiving a Call1. Turn on the radio.2. Adjust the volume level.3. Select the radio channel.Programmable Buttons’ Audio IndicatorsDeleting a Nuisance Channel1. With radio on a Nuisance Channel, press and hold the preprogrammed Nuisance Delete button until you hear a tone.2. Release the Nuisance Delete button.Programmable ButtonsPositive Indicator ToneNegative Indicator ToneScan Start Scan operation Stop Scan operationPower Level Radio transmits at high power Radio transmits at low powerSquelch Radio operates in tight squelchRadio operates in normal squelchRepeater/TalkaroundRadio DOES NOT use the repeaterRadio uses the repeater12_QR-Card.fm  Page 32  Thursday, September 19, 2002  5:17 PM
Commercial SeriesTwo-Way Radio User GuideFrench goes hereCP200MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2002. All rights reserved. Printed in U.S.A.Motorola, Le logo stylisé M, et intelligence universelle sont des marques de Motorola, Inc.© 2002 Motorola, Inc. Tous droits réservés. Imprimé aux États-Unis.*6880309N60*6880309N60-O309N60-O_cvr.qxd  9/12/2002  10:56 AM  Page 1

Navigation menu