Motorola Solutions 99FT3045 CP200 VHF Portable Radio User Manual 309N60 O cvr

Download:
Mirror Download [FCC.gov]
Document ID	272485
Application ID	bBXOanHJvuD9WXs/3u46xQ==
Document Description	Ex 8a Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	152.24kB (1903054 bits)
Date Submitted	2002-09-24 00:00:00
Date Available	2002-11-26 00:00:00
Creation Date	2002-09-12 15:56:35
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2002-09-20 15:16:58
Document Title	309N60-O_cvr.qxd
Document Creator	PScript5.dll Version 5.2
Document Author:	ckc015

309N60-O_cvr.qxd
9/12/2002
10:56 AM
Page 1
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.
© Motorola, Inc. 2002. All rights reserved. Printed in U.S.A.
Motorola, Le logo stylisé M, et intelligence universelle sont des marques de Motorola, Inc.
© 2002 Motorola, Inc. Tous droits réservés. Imprimé aux États-Unis.
Commercial Series
Two-Way Radio User Guide
French goes here
*6880309N60*
6880309N60-O
CP200
Non-displayTOC.fm Page 1 Thursday, September 19, 2002 4:59 PM
CONTENTS
Safety and Warranty . . . . . . . . . . . . . . . . . 3
Product Safety and RF Exposure
Compliance . . . . . . . . . . . . . . . . . . . . . . . . 3
Battery Information . . . . . . . . . . . . . . . . . . . 3
Charging Batteries . . . . . . . . . . . . . . . . . 3
Limited Warranty . . . . . . . . . . . . . . . . . . . . . 4
Radio Overview . . . . . . . . . . . . . . . . . . . . . 9
Parts of the Radio . . . . . . . . . . . . . . . . . . . . 9
CP200™ Model . . . . . . . . . . . . . . . . . . . 9
On/Off/Volume Knob . . . . . . . . . . . . . . 10
Channel Selector Knob . . . . . . . . . . . . 10
Push-to-Talk (PTT) Button . . . . . . . . . . 10
Microphone . . . . . . . . . . . . . . . . . . . . . 10
LED Indicator . . . . . . . . . . . . . . . . . . . . 10
Programmable Buttons . . . . . . . . . . . . 11
Indicator Tones . . . . . . . . . . . . . . . . . . . . . 13
Audio Indicators for Programmable
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Improved Audio Features . . . . . . . . . . . . . 14
Companding. . . . . . . . . . . . . . . . . . . . . 14
Getting Started . . . . . . . . . . . . . . . . . . . . 15
Battery Information . . . . . . . . . . . . . . . . . . 15
Charging Your Battery . . . . . . . . . . . . . 15
Wall Charger . . . . . . . . . . . . . . . . . . . . 15
16
17
17
17
18
18
19
19
20
20
20
21
21
21
CONTENTS
Computer Software Copyrights . . . . . . . . . . 2
Desktop Charger . . . . . . . . . . . . . . . . .
Accessory Information . . . . . . . . . . . . . . .
Attaching the Battery . . . . . . . . . . . . . .
Removing the Battery . . . . . . . . . . . . .
Attaching the Antenna . . . . . . . . . . . . .
Removing the Antenna . . . . . . . . . . . .
Attaching the Belt Clip . . . . . . . . . . . . .
Removing the Belt Clip . . . . . . . . . . . .
Turning the Radio On or Off . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . .
Selecting a Radio Channel . . . . . . . . . . . .
Sending a Call . . . . . . . . . . . . . . . . . . . . .
Receiving a Call . . . . . . . . . . . . . . . . . . . .
Monitoring . . . . . . . . . . . . . . . . . . . . . . . . .
Radio Calls . . . . . . . . . . . . . . . . . . . . . . . 23
Repeater or Talkaround Mode . . . . . . . . .
Setting Tight or Normal Squelch. . . . . . . .
Setting the Power Level . . . . . . . . . . . . . .
Receiving a Selective Call . . . . . . . . . . . .
Receiving a Call Alert Page . . . . . . . . . . .
23
23
23
24
24
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Starting or Stopping Scan. . . . . . . . . . . . .
Talkback . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a Nuisance Channel . . . . . . . . . .
Restoring a Channel to the Scan List .
Prioritizing a Scan List Member . . . . . . . .
25
25
25
25
26
English
Non-displayTOC.fm Page 2 Thursday, September 19, 2002 4:59 PM
CONTENTS
Accessories . . . . . . . . . . . . . . . . . . . . . . 27
Carry Accessories. . . . . . . . . . . . . . . . . . .
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . .
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . .
Headsets . . . . . . . . . . . . . . . . . . . . . . . . .
Surveillance Accessories . . . . . . . . . . . . .
Remote Speaker Microphones . . . . . . . . .
Antennas . . . . . . . . . . . . . . . . . . . . . . . . .
English
27
27
27
28
28
29
29
COMPUTER SOFTWARE
COPYRIGHTS
The Motorola products described in this
manual may include copyrighted Motorola
computer programs stored in semiconductor
memories or other media. Laws in the United
States and other countries preserve for
Motorola certain exclusive rights for
copyrighted computer programs including, but
not limited to, the exclusive right to copy or
reproduce in any form the copyrighted
computer program. Accordingly, any
copyrighted Motorola computer programs
contained in the Motorola products described
in this manual may not be copied, reproduced,
modified, reverse-engineered, or distributed in
any manner without the express written
permission of Motorola. Furthermore, the
purchase of Motorola products shall not be
deemed to grant either directly or by
implication, estoppel, or otherwise, any license
under the copyrights, patents or patent
applications of Motorola, except for the normal
non-exclusive license to use that arises by
operation of law in the sale of a product.
10_SafetyNA..fm Page 3 Thursday, September 19, 2002 4:59 PM
SAFETY AND WARRANTY
PRODUCT SAFETY AND RF
EXPOSURE COMPLIANCE
Caution
Before using this product, read
the operating instructions for safe
usage contained in the Product
Safety and RF Exposure booklet
enclosed with your radio.
This radio is restricted to occupational use
only to satisfy FCC RF energy exposure
requirements. Before using this product, read
the RF energy awareness information and
operating instructions in the Product Safety
and RF Exposure booklet enclosed with your
radio (Motorola Publication part number
68P81095C98) to ensure compliance with RF
energy exposure limits.
For a list of Motorola-approved antennas,
batteries, and other accessories, visit the
following web site which lists approved
accessories: http://www.motorola.com/cgiss/
index.shtml.
Charging Batteries
This product is powered by a nickel-cadmium
(NICd) or lithium-ion (Lilon) rechargeable
battery. Charge the battery before use to
ensure optimum capacity and performance.
The battery was designed specifically to be
used with a Motorola charger. Charging in nonMotorola equipment may lead to battery
damage and void the battery warranty.
SAFETY AND
WARRANTY
ATTENTION!
BATTERY INFORMATION
Note: When charging a battery attached to a
radio, turn the radio off to ensure a full
charge.
The battery should be at about 77°F (25°C)
(room temperature), whenever possible.
Charging a cold battery (below 50° F [10°C])
may result in leakage of electrolyte and
ultimately in failure of the battery. Charging a
hot battery (above 95°F [35°C]) results in
reduced discharge capacity, affecting the
performance of the radio. Motorola rapid-rate
battery chargers contain a temperaturesensing circuit to ensure that batteries are
charged within the temperature limits stated
above.
English
10_SafetyNA..fm Page 4 Thursday, September 19, 2002 4:59 PM
LIMITED WARRANTY
MOTOROLA COMMUNICATION
PRODUCTS
I. WHAT THIS WARRANTY COVERS AND
FOR HOW LONG:
SAFETY AND
WARRANTY
MOTOROLA INC. (“MOTOROLA”) warrants the
MOTOROLA manufactured Communication
Products listed below (“Product”) against defects
in material and workmanship under normal use
and service for a period of time from the date of
purchase as scheduled below:
CP200 Portable Unit
Product Accessories
Motorola, at its option, will at no charge either
repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the terms of this
warranty. Replaced parts or boards are
warranted for the balance of the original
applicable warranty period. All replaced parts of
Product shall become the property of
MOTOROLA.
English
One (1) Year
One (1) Year
This express limited warranty is extended by
MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party. This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability
for additions or modifications to this warranty
unless made in writing and signed by an officer
of MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the
original end user purchaser, MOTOROLA does
not warrant the installation, maintenance or
service of the Product.
MOTOROLA cannot be responsible in any way
for any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of
the Product with any ancillary equipment, and all
such equipment is expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole under this warranty.
10_SafetyNA..fm Page 5 Thursday, September 19, 2002 4:59 PM
II. GENERAL PROVISIONS:
SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES OR
LIMITATION ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE
LIMITATION OR EXCLUSIONS MAY NOT
APPLY.
This warranty gives specific legal rights, and
there may be other rights which may vary from
state to state.
IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the
date of purchase and Product item serial number)
in order to receive warranty service and, also,
deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty
service location. Warranty service will be
provided by Motorola through one of its
authorized warranty service locations. If you first
contact the company which sold you the Product
(e.g., dealer or communication service provider),
it can facilitate your obtaining warranty service.
You can also call Motorola at 1-800-927-2744
US/Canada.
SAFETY AND
WARRANTY
This warranty sets forth the full extent of
MOTOROLA's responsibilities regarding the
Product. Repair, replacement or refund of the
purchase price, at MOTOROLA’s option, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL
LOSS, LOST PROFITS OR SAVINGS OR
OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OR INABILITY TO USE SUCH
PRODUCT, TO THE FULL EXTENT SUCH MAY
BE DISCLAIMED BY LAW.
III. STATE LAW RIGHTS:
English
10_SafetyNA..fm Page 6 Thursday, September 19, 2002 4:59 PM
SAFETY AND
WARRANTY
V. WHAT THIS WARRANTY DOES NOT
COVER:
English
A Product which, due to illegal or
unauthorized alteration of the software/
firmware in the Product, does not function in
accordance with MOTOROLA’s published
specifications or the FCC type acceptance
labeling in effect for the Product at the time
the Product was initially distributed from
MOTOROLA.
Defects or damage resulting from use of the
Product in other than its normal and
customary manner.
Defects or damage from misuse, accident,
water, or neglect.
Defects or damage from improper testing,
operation, maintenance, installation,
alteration, modification, or adjustment.
Scratches or other cosmetic damage to
Product surfaces that does not affect the
operation of the Product.
Breakage or damage to antennas unless
caused directly by defects in material
workmanship.
Normal and customary wear and tear.
VI. PATENT AND SOFTWARE PROVISIONS:
A Product subjected to unauthorized
Product modifications, disassemblies or
repairs (including, without limitation, the
addition to the Product of non-Motorola
supplied equipment) which adversely affect
performance of the Product or interfere with
Motorola's normal warranty inspection and
testing of the Product to verify any warranty
claim.
MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to
the extent that it is based on a claim that the
Product or parts infringe a United States patent,
and MOTOROLA will pay those costs and
damages finally awarded against the end user
purchaser in any such suit which are attributable
to any such claim, but such defense and
payments are conditioned on the following:
Product which has had the serial number
removed or made illegible.
Freight costs to the repair depot.
that MOTOROLA will be notified promptly in
writing by such purchaser of any notice of
such claim;
10_SafetyNA..fm Page 7 Thursday, September 19, 2002 4:59 PM
that MOTOROLA will have sole control of the
defense of such suit and all negotiations for
its settlement or compromise; and
should the Product or parts become, or in
MOTOROLA’s opinion be likely to become,
the subject of a claim of infringement of a
United States patent, that such purchaser
will permit MOTOROLA, at its option and
expense, either to procure for such
purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product
or parts as depreciated and accept its
return. The depreciation will be an equal
amount per year over the lifetime of the
Product or parts as established by
MOTOROLA.
MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or used in
connection with the Product. The foregoing
states the entire liability of MOTOROLA with
respect to infringement of patents by the Product
or any parts thereof.
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software such as
the exclusive rights to reproduce in copies and
distribute copies of such Motorola software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product
may not be replaced, copied, distributed,
modified in any way, or used to produce any
derivative thereof. No other use including,
without limitation, alteration, modification,
reproduction, distribution, or reverse engineering
of such MOTOROLA software or exercise of
rights in such MOTOROLA software is permitted.
No license is granted by implication, estoppel or
otherwise under MOTOROLA patent rights or
copyrights.
SAFETY AND
WARRANTY
VII. GOVERNING LAW:
This Warranty is governed by the laws of the
State of Illinois, USA.
English
10_SafetyNA..fm Page 8 Thursday, September 19, 2002 4:59 PM
SAFETY AND
WARRANTY
Notes:
English
03_Overview.fm Page 9 Thursday, September 19, 2002 5:01 PM
RADIO OVERVIEW
PARTS OF THE RADIO
CP200™ Model
On/Off/Volume
Knob
Push-to-Talk
(PTT) Button
Channel Selector
Knob
LED Indicator
Side Button 1
(programmable)
RADIO OVERVIEW
Side Button 2
(programmable)
Microphone
Accessory Connector
with a Dust Cover
English
03_Overview.fm Page 10 Thursday, September 19, 2002 5:01 PM
On/Off/Volume Knob
Basic Features
Turns the radio on or off, and adjusts the
radio’s volume.
Radio Call
Channel Selector Knob
Red
Sending message
Switches the radio to different channels.
Flashing Red
Receiving message
LED State/Color
Indication
Scan
Push-to-Talk (PTT) Button
Flashing Green
Press and hold down this button to talk;
release it to listen.
Call Alert
Microphone
When sending a message, hold the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth, and speak clearly into it.
Double Flash
Yellow
Scanning for activity
Indicates receiving Call Alert
Selective Call
Double Flash
Yellow
Indicates receiving Select Call
Sticky Monitor
LED Indicator
RADIO OVERVIEW
Indicates power-up, TX, RX, scan status, Call
Alert™, Selective Call, and battery status.
While monitoring and upon
channel change
Low Battery
Flashing Red
when sending
message
10
English
Yellow
Low battery level
03_Overview.fm Page 11 Thursday, September 19, 2002 5:01 PM
Battery Charge Status
You can check battery charge status by holding
down the preprogrammed Battery Gauge
button. The charge status is shown by the color
of the radio’s LED indicator.
Battery
Level
LED
Indicator
High
Green
Sufficient
Yellow
Low
Flashing Red
Very Low
None
Programmable Buttons
•
short press — quickly pressing and releasing the programmable buttons
•
long press — pressing and holding the
programmable buttons for a period of time
(default 1 1/2 seconds or programmed
value) before releasing
•
hold down — pressing and holding down
the programmable buttons while checking
status or making adjustments
Depending on how your radio has been
programmed by your dealer, these functions
are activated EITHER through a short press
OR a long press, but NOT both.
A summary of programmable radio features
and corresponding page references appears
beginning on page 12.
In the “Feature” column, have your dealer write
down the programmable buttons next to the
features that have been programmed to them.
RADIO OVERVIEW
The two side buttons on your radio can be
programmed by your dealer as shortcuts to
various radio features.
Check with your dealer for a complete list of
functions your radio supports.
Each button can be programmed to select
features, depending on the type of button
press:
11
English
03_Overview.fm Page 12 Thursday, September 19, 2002 5:01 PM
Feature
RADIO OVERVIEW
Battery
Gauge
—
Hold Down
Page
Checks the battery charge status.
11
Sticky
Permanent
Monitor
A long press of the Monitor button
Monitors the selected channel for
initiates. A short press of the Moniany activity.
tor button cancels.
21
Volume Set
Sounds a tone for adjusting the radio’s volume level.
20
Power Level
Toggles your radio’s transmit power
level between High and Low power.
—
23
Repeater/
Talkaround
Toggles between using a repeater
and transmitting directly to another
radio.
—
23
Squelch
Toggles your radio’s squelch level
between tight and normal squelch.
—
23
Scan
Starts or stops the Scan operation.
—
25
Nuisance
Channel
Delete
Deletes a nuisance channel while
scanning.
—
25
12
English
Short Press/Long Press
Button
03_Overview.fm Page 13 Thursday, September 19, 2002 5:01 PM
INDICATOR TONES
High pitched tone
Low pitched tone
AUDIO INDICATORS FOR
PROGRAMMABLE BUTTONS
Some programmable buttons use tones to
indicate one of two modes:
Self Test Pass Tone
Button
Self Test Fail Tone
Negative
Indicator Tone
Scan
Start scan
Stop scan
Power Level
High power
selected
Low power
selected
Squelch
Tight squelch
Normal squelch
Repeater/
Talkaround
Does not use
repeater
Uses repeater
Positive Indicator Tone
Negative Indicator Tone
Positive
Indicator Tone
RADIO OVERVIEW
13
English
03_Overview.fm Page 14 Thursday, September 19, 2002 5:01 PM
IMPROVED AUDIO FEATURES
Companding
RADIO OVERVIEW
Companding is a feature that allows further
improvement of voice quality. It compresses
your voice at transmission, and expands it
when receiving while simultaneously reducing
extraneous noise. However, to enjoy this
benefit, all transmitting and receiving radios
must have this feature activated.
14
English
04_GetStarted.fm Page 15 Friday, September 20, 2002 9:45 AM
To Charge the Battery
Turn the radio off.
Lift the dust cover to expose the audio
accessory connector.
Insert the charging adapter into the
accessory connector.
Plug the charging adapter into an electrical
outlet.
GETTING STARTED
GETTING STARTED
BATTERY INFORMATION
Charging Your Battery
If a battery is new, or its charge level is very
low, you will need to charge it before you can
use it. When the battery level is low and the
radio is in transmit mode you will see the LED
indicator flash red. Upon release of the PTT
button, you will hear an alert tone.
•
Note: Batteries are shipped uncharged from
the factory. Always charge a new
battery 14 to 16 hours before initial
use, regardless of the status indicated
by the charger.
Note: Do not use the wall charger and
desktop charger at the same time
when charging.
Wall Charger
Note: Do not use the wall charger if using a
lithium-ion battery. The wall charger is
for nickel-cadmium (NiCd) batteries
only.
The LED on the charging adapter lights
Red while the charger is plugged into an
electrical outlet.
Note:
Do not leave the charger connected
to the radio when it is not connected
to the electrical outlet.
Unplug the charger from the electrical outlet
and radio after 10 hours.
Note:
After the initial charge of 14 to 16
hours, do not charge the battery
more than 10 hours.
15
English
GETTING STARTED
04_GetStarted.fm Page 16 Friday, September 20, 2002 9:45 AM
Desktop Charger
To Charge the Battery
Turn the radio off.
Place the battery, with or without the radio, in
the charger pocket.
•
The charger LED indicates the charging
progress.
LED color
Status
Battery 90% (or more)
charged.
Green
Battery fully charged.
* Remove the battery from the charger and use a
pencil eraser to clean the three metal contacts
at the back of the battery. Place the battery
back in the charger. If the LED indicator
continues to flash red, replace the battery.
† A standard battery may require 90 minutes to
charge to 90% capacity.
Status
No LED Indication
Battery inserted incorrectly
or battery not detected.
Single Green Flash
Successful charger
power-up.
Flashing Red*
Battery unchargeable or not
making proper contact.
Red
Battery is charging.
Flashing Yellow
Battery in charger but waiting to be charged. The battery temperature may be too
hot or too cold. The voltage
may be lower than the predetermined threshold level
for charging.
16
English
LED color
Flashing Green†
A list of Motorola authorized batteries and
battery chargers appears on page 27. The
listed chargers will charge only Motorola
authorized batteries. Other batteries may not
charge.
04_GetStarted.fm Page 17 Friday, September 20, 2002 9:45 AM
Removing the Battery
GETTING STARTED
ACCESSORY INFORMATION
Attaching the Battery
Battery Latch
Align the battery to the battery rails on the
back of the radio (approximately 1/2 in. from
the top of the radio.)
Press the battery firmly to the radio and slide the
battery upward until the latch snaps into place.
Slide the battery latch, located on radio bottom,
into the lock position.
Turn off the radio if it is turned on (see page 20).
Slide the battery latch into the unlock position.
Disengage by pushing downward and holding
the latch towards the front of the radio.
With the battery latch disengaged, slide the
battery down from the top of the radio about
1/2 in. Once the battery is free from the
battery rails, lift it directly away from the radio.
17
English
GETTING STARTED
04_GetStarted.fm Page 18 Friday, September 20, 2002 9:45 AM
Attaching the Antenna
Turn the antenna clockwise to attach it.
18
English
Removing the Antenna
Turn the antenna counter-clockwise to remove
it.
04_GetStarted.fm Page 19 Friday, September 20, 2002 9:45 AM
Removing the Belt Clip
GETTING STARTED
Attaching the Belt Clip
Belt Clip Tab
Align the grooves of the belt clip with those of
the battery.
Use a key to press the belt clip tab away from
the battery to unlock the belt clip.
Press the belt clip downward until you hear a
click.
Slide the belt clip upward to remove it.
19
English
GETTING STARTED
04_GetStarted.fm Page 20 Friday, September 20, 2002 9:45 AM
TURNING THE RADIO ON OR OFF
ON
Turn the On/Off/
Volume Control
knob clockwise. If
power-up is
successful, you will
hear the Self-Test
Pass Tone
) and
see the LED flash
green.
If the radio fails to
power up, you will
hear the Self Test
Fail Tone
).
20
English
OFF
Turn the On/Off/
Volume Control knob
counter-clockwise until
you hear a click.
ADJUSTING THE VOLUME
Hold down the Volume Set button (see page
12); you will hear a continuous tone.
Turn the On/Off/Volume Control knob to the
desired volume level.
Release the Volume Set button.
SELECTING A RADIO CHANNEL
Your radio offers 4 or 16 channels.
Note: Due to government regulations, some
channels may not be programmed. Ask
your dealer for more information.
To select a channel, turn the Channel
Selector knob clockwise or counterclockwise
until you reach the desired channel.
04_GetStarted.fm Page 21 Friday, September 20, 2002 9:45 AM
Turn your radio on.
Use the Channel Selector knob to select the
desired channel.
Hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
Release the PTT to listen.
RECEIVING A CALL
Turn your radio on.
Adjust the radio’s volume (see page 20).
Switch to the desired channel. To respond,
hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
MONITORING
GETTING STARTED
SENDING A CALL
It is important to monitor traffic before
transmitting to ensure that you do not “talk
over” someone who is already transmitting.
Momentarily press the preprogrammed
Monitor button to access channel traffic.
Once channel traffice has cleared, proceed
with your call by pressing the PTT button.
To place the radio in open squelch mode,
press and hold the preprogrammed Monitor
button until you hear a high-pitched tone.
Momentarily press the Monitor button to
return to normal operation.
21
English
GETTING STARTED
04_GetStarted.fm Page 22 Friday, September 20, 2002 9:45 AM
Notes:
22
English
05_RadioCall.fm Page 23 Thursday, September 19, 2002 5:11 PM
RADIO CALLS
In this case, normal squelch may be more
desirable.
Press the preprogrammed Squelch button
(see page 12) to toggle between tight and
normal squelch.
Talkaround Mode enables you to communicate
with another radio when either:
SETTING THE POWER LEVEL
•
the repeater is not operating
Each channel in your radio has a predefined
transmit power level that can be changed.
—or—
•
your radio is out of the repeater’s range but
within communicating distance of another
radio.
High power allows you to reach a radio that
is farther away.
•
Low power conserves the battery’s charge.
•
Press the preprogrammed Repeater/
Talkaround button (see page 12) to toggle
between Repeater mode and Talkaround
Mode.
Press the preprogrammed Power Level button
(see page 12) to toggle between low and high
power.
RADIO CALLS
REPEATER OR TALKAROUND
MODE
SETTING TIGHT OR NORMAL
SQUELCH
Use this feature to filter out nuisance
(unwanted) calls and/or background noise.
However, tightening squelch could cause calls
from remote locations to be filtered out as well.
23
English
05_RadioCall.fm Page 24 Thursday, September 19, 2002 5:11 PM
RECEIVING A SELECTIVE CALL
When you receive a selective call:
•
The LED indicator flashes yellow, if programmed by your dealer.
•
You hear two alert tones.
To answer the call, press the PTT button.
RADIO CALLS
RECEIVING A CALL ALERT PAGE
When you receive a Call Alert page:
•
The LED indicator flashes yellow, if programmed by your dealer.
•
You hear a recurring set of tones.
To answer the page, press the PTT button; to
cancel the page, press any other key.
24
English
06_Scan.fm Page 25 Thursday, September 19, 2002 5:12 PM
SCAN
You can monitor multiple channels and receive
any calls that are transmitted on them.
Channels can be programmed into a scan list
by your dealer. Your radio automatically
switches to a scan list channel when it detects
activity on it.
STARTING OR STOPPING SCAN
The LED indicator blinks green during a scan
operation and stops blinking when the radio
switches to a channel.
To start or stop a scan operation, press the
preprogrammed Scan button (see page 12).
TALKBACK
Note: Your dealer must have preprogrammed
a button to Nuisance Delete (see page
12) to access this feature.
If a channel continually generates unwanted
calls or noise (a “nuisance” channel), you can
temporarily remove it from the scan list:
While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot delete a priority channel or
last remaining channel in the scan list.
Restoring a Channel to the Scan List
Press the Scan button to stop the scan.
Press the Scan button again to start scanning
again. The Deleted Nuisance Channel is
restored to the scan list.
SCAN
If the Talkback option is preprogrammed, you
can respond to any calls received during the
scan operation. To respond, press the PTT
before the programmed hangtime elapses.
Otherwise, the radio will continue scanning.
Check with your dealer for details.
DELETING A NUISANCE CHANNEL
25
English
06_Scan.fm Page 26 Thursday, September 19, 2002 5:12 PM
PRIORITIZING A SCAN LIST
MEMBER
You may want your radio to scan a specific
channel more frequently for calls. Your dealer
can prioritize scan list members for you. Check
with your dealer for details.
Priority Channel
Scanning Sequence
None specified
Ch1➠Ch2➠Ch3➠
Ch4➠...Ch1
Channel 2
Ch2➠Ch1➠Ch2➠Ch3➠
Ch2➠Ch4➠Ch2➠...Ch1
SCAN
Even though your radio has switched to a nonpriority channel, it will still check for activity on
the priority channel. If activity is detected, the
radio will switch to the priority channel.
26
English
11_Accessory.fm Page 27 Thursday, September 19, 2002 5:12 PM
Motorola offers a number of accessories to
enhance the productivity of your two-way radio.
Many of the available accessories are listed
below. For a complete list, see your Motorola
dealer.
CARRY ACCESSORIES
HLN9701
Nylon Case with Belt Loop and
D-Shaped Rings
RLN5383
Hard Leather Case with Belt Loop
and D-Shaped Rings
RLN5384
Hard Leather Case with High Activity
2-1/2 inch Swivel Belt Loop
RLN5385
Hard Leather Case with High Activity
3 inch Swivel Belt Loop
PMLN4124
2-1/2 inch Belt Clip
HLN8255
Spring 3 inch Belt Clip
HLN6602
Universal Chest Pack
15-05596Z02
Replacement Strap for HLN6602
Universal Chest Pack
RLN4570
Universal Break-A-Way Chest Pack
RLN4815
Universal RadioPak
42-80384F89
Replacement Belt Lengthener for
RLN4815 Universal RadioPak
NTN5243
Shoulder Strap for Hard Leather
Cases (attaches to D-Shaped Rings
on case)
RLN4904
Mic Jacket for HMN9030 Remote
Speaker Microphone
ACCESSORIES
ACCESSORIES
CHARGERS
WPLN4137
Desktop Charger Base
WPLN4138
Desktop Charger w/US NA Plug
BATTERIES
NNTN4497_R
Lilon, 1800 maH
NNTN4496_R
NiCd, 1100 maH
27
English
11_Accessory.fm Page 28 Thursday, September 19, 2002 5:12 PM
ACCESSORIES
HEADSETS
RLN5411
Ultra-Lite Breeze Behind the Head
Headset
HMN9752
Earpiece with Volume Control,
1-Wire (plastic earloop) (Beige)
HMN9013
Lightweight Headset
HMN9727
RMN4016
Lightweight Headset with In-line PTT
Earpiece without Volume Control,
1-Wire (plastic earloop) (Beige)
RLN5238
Lightweight Headset with In-line PTT,
NFL Style
RLN4894
Earpiece without Volume Control,
1-Wire (plastic earloop) (Black)
HMN9021
Medium Weight Over the Head Dual
Muff Headset
HMN9754
Earpiece with Micrphone & PTT
Combined, 2-Wire (Beige)
HMN9022
Medium Weight Behind the Head
Dual Muff Headset
RLN4895
Earpiece with Micrphone & PTT
Combined, 2-Wire (Black)
BDN6647
Medium Weight Single Speaker
Headset
RLN5198
50-80371E66
Replacement Ear Pad for BDN6647
Earpiece with Microphone & PTT
Combined, 2-Wire Surveillance Kit w/
Clear Comfortable Acoustic Tube
(includes NTN8371)
BDN6648
Heavy Duty Dual Muff Headset with
Noise Canceling Microphone
RMN5015
Heavy Duty Dual Muff Racing
Headset (requires RKN4090
Headset Adapter Cable)
BDN6720
Flexible Ear Receiver (RX only)
HMN9036
Earbud with Microphone & PTT
Combined, 2-Wire (Black)
HLN9132
Earbud Single Wire Receive Only
Extreme Noise Kit
REX4648
Ear Pad and Windscreen Kit
NTN8370
RKN4090
In-Line PTT Adapter (use with
RMN5015)
NTN8371
Low Noise Kit
RLN4760
Small Custom Clear Earpiece,
Right Ear
RLN4763
Small Custom Clear Earpiece,
Left Ear
28
English
SURVEILLANCE ACCESSORIES
11_Accessory.fm Page 29 Thursday, September 19, 2002 5:12 PM
Medium Custom Clear Earpiece,
Right Ear
RLN4764
Medium Custom Clear Earpiece,
Left Ear
RLN4762
Large Custom Clear Earpiece,
Right Ear
RLN4765
Large Custom Clear Earpiece,
Left Ear
ACCESSORIES
RLN4761
REMOTE SPEAKER MICROPHONES
HMN9030
Remote Speaker Microphone
ANTENNAS
NAD6502
VHF Heliflex Antenna 14cm,
146-174 MHz
HAD9742
VHF Stubby Antenna, 9cm,
146-162 MHz
HAD9743
VHF Stubby Antenna, 9cm,
162-174 MHz
85-05816K25
UHF Heliflex Stubby Antenna 9cm,
438-470 MHz
NAE6483
Flexible Whip Antenna, 403-520 MHz
29
English
11_Accessory.fm Page 30 Thursday, September 19, 2002 5:12 PM
ACCESSORIES
Notes:
30
English
12_QR-Card.fm Page 31 Thursday, September 19, 2002 5:17 PM
LED Indicators
CP200 Quick Reference Card
LED State/Color
Radio Call
Red
Flashing Red
Indication
Sending message
Receiving message
Scan
Flashing Green
Scanning for activity
Low Battery
Flashing Red when
sending message
Low battery level
Call Alert
Double Flash
Yellow
Indicates receiving a Call Alert
Select Call
Double Flash
Yellow
Indicates receiving a Selective
Call
Sticky Monitor
Yellow
While monitoring and upon
channel change.
Battery Charge
Status
Green
Yellow
Flashing Red
None
On/Off/Volume Knob
Channel Selector Knob
PTT
SP:
LP:
Microphone
High
Sufficient
Low
Very Low
LED
Indicator
SP:
LP:
NOTE: Enter the functions for your radio’s two
programmable buttons in the boxes provided above.
SP represents Short Press, while LP represents
Long Press.
12_QR-Card.fm Page 32 Thursday, September 19, 2002 5:17 PM
Turning On the Radio
• Turn On/Off/Volume Control knob clockwise. If the
radio successfully powers up, you will hear the Self
Test Pass tone and see the LED light green. If the
radio fails to power up, you will hear the Self Test
Fail tone.
Receiving a Call
1. Turn on the radio.
2. Adjust the volume level.
3. Select the radio channel.
Programmable Buttons’ Audio Indicators
Turning Off the Radio
• Turn On/Off/Volume Control knob counterclockwise until you hear a click.
Programmable
Buttons
Positive
Indicator
Tone
Negative
Indicator
Tone
Adjusting the Radio Volume
1. Press and hold Volume Set button (preprogrammed
by your dealer) until you hear a continuous tone.
2. Turn On/Off/Volume Control knob to adjust volume
level.
3. Release Volume Set button at desired volume level.
Selecting a Radio Channel
• Turn Channel Selector knob clockwise or counterclockwise to reach desired channel.
Sending a Call
1. With radio on, turn Channel Selector knob to
required channel.
2. Press PTT and speak clearly with mouth about 2.5
to 5 cm (1 to 2 inches) away from microphone.
3. Release PTT when call is completed.
Scan
Start Scan
operation
Stop Scan
operation
Power Level
Radio transmits
at high power
Radio transmits
at low power
Squelch
Radio operates
in tight squelch
Radio operates
in normal
squelch
Repeater/
Talkaround
Radio DOES
NOT use the
repeater
Radio uses the
repeater
Deleting a Nuisance Channel
1. With radio on a Nuisance Channel, press and hold
the preprogrammed Nuisance Delete button until
you hear a tone.
2. Release the Nuisance Delete button.
309N60-O_cvr.qxd
9/12/2002
10:56 AM
Page 1
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.
© Motorola, Inc. 2002. All rights reserved. Printed in U.S.A.
Motorola, Le logo stylisé M, et intelligence universelle sont des marques de Motorola, Inc.
© 2002 Motorola, Inc. Tous droits réservés. Imprimé aux États-Unis.
Commercial Series
Two-Way Radio User Guide
French goes here
*6880309N60*
6880309N60-O
CP200

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:09:12 15:56:35Z
Modify Date                     : 2002:09:20 15:16:58-05:00
Page Count                      : 34
Creation Date                   : 2002:09:12 15:56:35Z
Mod Date                        : 2002:09:20 10:59:13-04:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : ckc015
Metadata Date                   : 2002:09:20 10:59:13-04:00
Creator                         : ckc015
Title                           : 309N60-O_cvr.qxd
Has XFA                         : No

EXIF Metadata provided by EXIF.tools