Motorola Solutions 99FT3050 VHF Portable Handheld Transceiver User Manual 1096C35 O EME

Motorola Solutions, Inc. VHF Portable Handheld Transceiver 1096C35 O EME

Contents

Ex 08A Users Guide

Modern, Efficient,With Exceptional Value Business PortableTwo-Way RadioABCDAttaching and Removing the AntennaTo Attach AntennaTo Remove Antenna1. Fasten the antenna to the radio by placing the threaded end of the antenna into the Antenna Connector.2. Rotate the antenna clockwise until tight.1. Turn the antenna in a counter-clockwise direction until it dis-engages from the radio.ggAntenna ConnectorThreaded Endof AntennaAttaching and Removing the BatteryTo Attach BatteryTo Remove Battery1. Fit the battery slots with the grooves on the radio.2. Slide the battery upwards until a click is heard.1. Slide the battery clasp away from the radio.2. Slide the battery downwards.3. Pull the battery away from the radio.Battery SlotsGroovesBatteryClaspAttaching and Removing the Belt ClipTo Attach Belt ClipTo Remove Belt Clip1. Align mounting rails of the radio with the grooves of the belt clip.2. Slide the belt clip downwards until it clicks into place.1. Insert the end of a key between the release tab and the back surface of the radio.2. Lift the release tab.3. Slide the belt clip upwards.Release TabMounting GroovesCharging your Radio1. Turn off your radio, if it is turned on. It is highly recommended that the radio be turned off while charging.2. Lift the Dust Cover covering the Accessory Connector.3. Insert charging connection of the charger into the Programming Port.4. Plug in charger to wall outlet.5. Radio should be charged at least 16 hours initially before decreasing charging time to 10 hours.6. Turn on your radio, when charging is complete; you should see all 3 bars of the Battery Level Indicator illuminated.ProgrammingPortDust Cover*6881096C35*6881096C35-O© 2003 by Motorola, Inc.Motorola, Inc.1301 E. Algonquin Road, Schaumburg IL 60196Printed in Penang. All Rights Reserved.Product Safety and RF Exposure ComplianceATTENTION!This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68P81095C98) to ensure compliance with RF energy exposure limits.AccessoriesThere are a number of accessories to enhance the productivity of your two-way radio. Many of the available accessories are listed below.Note:Before using this product, read the operating instruc-tions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio.BatteriesPMNN4046 NiMH, 1300 mAHChargersPMTN4048 Rapid Charger, 110 V US NA w/Line CordPMLN4139 Transformer for PMTN4048PMTN4073 10 Hour Charger, 120 V US NA PlugAntennasPMAD4012 136-155 MHz, Helical Antenna, 9cmPMAD4013 155-174 MHz, Helical Antenna, 9cmPMAE4011 435-480 MHz, Helical Antenna, 10cmPMAD4014 136-155 MHz, Helical Antenna, 14cmPMAD4027 136-155 MHz, Helical Antenna, 15cmPMAD4028 148-174 MHz, Helical Antenna, 15cmPMAD4015 155-174 MHz, Helical Antenna, 14cm!C a u t i o nPMAE4003 430-470 MHz, Helical Antenna, 9cmNAE6483 403-520 MHz, Whip AntennaNAD6502 146-174 MHz, Heliflex AntnnaCarry AccessoriesPMLN4467 Leather Carrying CasePMLN4468 Carry Holster Case, GreyPMLN4469 Carry Holster Case, Blue4285820Z01 Shoulder StrapHLN9844 1-1/2 inch Belt ClipRLN4815 Fanny Pack4280384H01 Radio Pak Replacement Retaining Strap w/Snap4280384F89 Radio Pak Belt Lengthener for RLN4815HLN9985 Waterproof BagJMZN4020 Hand Strap for RadioAudio AccessoriesPMLN4294 Ear Set Mic w/PTTPMLN4425 Ear Set Boom Mic w/Remote Ring PTTHMN9030 Remote Speaker MicHMN9013 Lightweight Handset w/Boom MicAntennas
ABCDScanScan allows you to monitor multiple channels and receive calls that are transmitted on them. Two types of scan are supported: Normal Scan and Priority Scan.Normal Scan searches all channels sequentially in the radio’s scan list, whereas Priority Scan allocates 50% of the scanning time to the Priority Channel (the first channel in the designated scan list).During scan, when activity is detected that meets the unsquelch condition, the radio stops scanning and switches to that channel; the G indicator is illuminated, and the channel number is displayed. When no activity is detected for a pre-set time, the radio resumes scanning.If your radio has switched to a non-priority channel during priority scan, it still checks for activity on the priority channel. If activity is detected there, the radio switches to the priority channel.The radio transmits on the Prime Channel, if PTT is pressed during scanning. If the radio has stopped scanning, and changed to a particular channel, all transmit and receive activity is performed on that channel.• Press the Scan button to begin channel scanning. The G indicator blinks to indicate that the radio is scanning. The LCD Screen shows the Prime Channel where the scan began.• Press thebutton to scan the channels in incremental order, and thebutton to scan in the opposite order.• Press Scan button to stop scanning.Deleting a Nuisance Scan ChannelA channel with unwanted activity is called a Nuisance Channel. You can remove a Nuisance Channel from the scan list temporarily. To remove a Nuisance Channel• Press the Nuisance Channel Delete button, when your radio stops on a Nuisance Channel. A high-pitched tone is heard.You cannot remove the Prime or Priority Channel from the scan list. If attempted, a low-pitched tone is heard, and no action is taken.To reinstate the deleted channel(s) into the scan list, restart scan, or simply turn off your radio and turn it on again.Programming ModeThis mode allows you to change feature parameters to enhance the use of your radio.Entering Programming ModeIf your radio is turned on, turn it off. Press and hold the Monitor button, and turn on your radio. A ringing tone is heard, indicating that your radio is in Programming Mode. The K indicator illuminates and RW is displayed.Exiting Programming ModeTurn off the radio, to exit Programming Mode.Accessing Programming Mode ParametersPress PTT or the Monitor button, to scroll through the features available in Programming Mode. Press the  button to scroll through the parameters for each feature.Feature Range RemarksSquelch Level(SQL-XX)SQL-00, …, SQL-15 Select low level when you need to receive very weaksignal, and select high level when the communications distance is near.Time Out Timer(TOT-XXX)TOT-OFF, TOT-001, …, TOT-010 This determines the maximum duration (in minutes) that you can transmit continuously.Scan List 1(SCANLST1)1-01-XXX, …,1-16-XXX,XXX denotes channel number.Up to 16 members per scan list. First member is assigned as Priority Channel, if Priority Scan is started. When scanning is started, only these 16 members will be scanned.Battery Saver(BS-XXXX)BS-OFF,BS-NORM,BS-ENHBattery Saver helps to extend your battery life. When enabled, it turns off radio receiver circuitry periodically when no activity is detected. BS-NORM (Normal) turns off the radio less frequently; select this if you want to save bat-tery, but expect a Selective Call. BS-ENH (Enhanced) turns off the receiver for a longer duration; select this if you want to maximize battery saving and do not expect to receive any Selective Call.Battery Type(BT-XXXX)BT-NIMH,BT-NICD,BT-ALKSelects the type of battery that your radio uses: NIMH (Nickel Metal Hydride), NICD (Nickel Cadmium) or ALK (Alkaline).Alert Tone Volume(BEEP-X)BEEP-OFF, BEEP-1,BEEP-2,BEEP-3Selects the alert tone volume needed. Select BEEP-OFF, if you require quiet operation, or BEEP-3, if working in a noisy environment.Prime Channel Select(PRM-XXX)PRM-OFF, PRM-001, ….,PRM-XXX,XXX denotes the highest channel number supported by your model.The Prime Channel is the channel that you wish to spend most of your time monitoring. The radio will always switch back to the Prime Channel if it is idle for more than the pre-programmed hang-time in other channel.Backlight  Select(LGT-XXXX)LGT-AUTO, LGT-TOGL Selecting LGT-TOGL makes the Backlight button a toggle to control the ON/OFF status of the LCD backlight. Selecting LGT-AUTO causes the backlight to automatically extinguish, if there is no keypress for more than 5 seconds. Pressing the Backlight button prolongs illumination time.Ch. 2 Ch. 1  Ch. 3Ch. 1  Ch. 4  Ch. 1Home   Start Channel 1 PrioritizedCh. 2 Ch. 3   Ch. 4Ch. 1   Home  StartNormal ScanLCD Screen• Displays selected channel, programming parameters, status messages and any error or information messages.LCD IndicatorDescription FunctionLKeypad lock indicator Illuminates when your keypad is locked.JTalkaround indicator Illuminates when you are not transmitting through the repeater.  Extinguishes when you are transmitting using the repeater offset/user-defined transmit frequency.Battery level indicator  Shows remaining charge in battery based on how many bars are displayed.BPower level indicator “L” illuminates to indicate radio transmits in low power; “H” illuminates to indicate radio transmits in high power.CMonitor indicator Illuminates when monitoring a selected channel.KProgramming Mode indicatorIlluminates when in Programming Mode.HScan indicator Blinks, without the dot, when scan is activated.  Illuminates when there is some activity on a non-priority channel. Illuminates, with dot blinking, indicates that there is some activity on the priority channel.Signal Strength Indicator Shows the signal strength.  Six bars indicate the strongest signal.On/Off and Volume Knob• If the radio is off, turn this knob clockwise to turn the radio on.• If the radio is on, turn this knob counter-clockwise to turn the radio off.• Turn this knob clockwise to increase the volume.• Turn this knob counter-clockwise to decrease the volume.Monitor Button• Used to monitor the channel for any activity; squelch is disabled.Push-to-Talk (PTT) button• Press and speak to microphone to send message.• Release and listen to receive messages.Microphone• Speak into the microphone when send-ing message.  Button • Used to select a channel in Normal Mode.• Used to select a parameter in Program-ming Mode.• Used to change the scanning direction.Speaker• You will hear received messages through the speaker.Accessory Connector• Used to connect compatible accessories to your radio.LED IndicatorsLED Colour State IndicationRed Illuminated Radio is transmitting.Red Blinking Battery voltage is low.Green Illuminated Radio is receiving.Programming Port• Lower port of the radio.• Used to program your radio.Programmable Buttons (A, B, C, D)• Used to select various functions. These functions can be assigned as a short press (press and release) or a long press (press and hold for 1 second).• The default functions programmed to your radio are described in the table below.• Although your radio is programmed with default functions, you have the ability to re-program the radio’s programmable buttons. You may want to write down the new functions in the table below.Button FunctionChannel Alias11. Parameter values are preserved, even after the radio is turned off.Toggles display between Channel Number and Channel Alias.Backlight Toggles backlight display between On and Off.Keypad Lock1Locks or unlocks all buttons except PTT, Monitor and On/Off/Volume Knob.Nuisance Channel DeleteRemoves unwanted channel(s) temporarily from scan list during scan.PL/DPL Enable22. Turning off the radio or changing the channel restores this setting to the default value of the active channel.Enables or disables radio from requiring matching PL/DPL to unsquelch.Prime Channel Quick move to the pre-programmed “Prime” channelPower Select1Selects required power level: High or Low.Scan1Starts or stops channel scan.Squelch Level1Selects desired squelch level.  Use the   button to choose desired level (Level 0 will unsquelch radio unconditionally, whereas Level 15 will set tightest squelch).Talkaround Enables or disables radio to transmit in Talkaround mode.No Operation No function is programmed to this button.Alert Tone Volume1Selects the alert tone volume needed for quiet operations or a noisy environment.Press Type Button A Button B Button C Button DShort Press Prime Channel Scan On/Off Power Select Backlight On/OffLong Press Channel Alias Nuisance Channel DeleteSquelch Level Kepad LockPress Type Button A Button B Button C Button DShort PressLong Press

Navigation menu