Motorola Solutions 99FT4056 CP200 UHF Portable Radio User Manual 309N60 O cvr
Motorola Solutions, Inc. CP200 UHF Portable Radio 309N60 O cvr
Contents
- 1. Ex 8a Users Manual
- 2. Ex 8b RF Safety Booklet
Ex 8a Users Manual
309N60-O_cvr.qxd 9/12/2002 10:56 AM Page 1 MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2002. All rights reserved. Printed in U.S.A. Motorola, Le logo stylisé M, et intelligence universelle sont des marques de Motorola, Inc. © 2002 Motorola, Inc. Tous droits réservés. Imprimé aux États-Unis. Commercial Series Two-Way Radio User Guide French goes here *6880309N60* 6880309N60-O CP200 Non-displayTOC.fm Page 1 Thursday, September 19, 2002 4:59 PM CONTENTS Safety and Warranty . . . . . . . . . . . . . . . . . 3 Product Safety and RF Exposure Compliance . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery Information . . . . . . . . . . . . . . . . . . . 3 Charging Batteries . . . . . . . . . . . . . . . . . 3 Limited Warranty . . . . . . . . . . . . . . . . . . . . . 4 Radio Overview . . . . . . . . . . . . . . . . . . . . . 9 Parts of the Radio . . . . . . . . . . . . . . . . . . . . 9 CP200™ Model . . . . . . . . . . . . . . . . . . . 9 On/Off/Volume Knob . . . . . . . . . . . . . . 10 Channel Selector Knob . . . . . . . . . . . . 10 Push-to-Talk (PTT) Button . . . . . . . . . . 10 Microphone . . . . . . . . . . . . . . . . . . . . . 10 LED Indicator . . . . . . . . . . . . . . . . . . . . 10 Programmable Buttons . . . . . . . . . . . . 11 Indicator Tones . . . . . . . . . . . . . . . . . . . . . 13 Audio Indicators for Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Improved Audio Features . . . . . . . . . . . . . 14 Companding. . . . . . . . . . . . . . . . . . . . . 14 Getting Started . . . . . . . . . . . . . . . . . . . . 15 Battery Information . . . . . . . . . . . . . . . . . . 15 Charging Your Battery . . . . . . . . . . . . . 15 Wall Charger . . . . . . . . . . . . . . . . . . . . 15 16 17 17 17 18 18 19 19 20 20 20 21 21 21 CONTENTS Computer Software Copyrights . . . . . . . . . . 2 Desktop Charger . . . . . . . . . . . . . . . . . Accessory Information . . . . . . . . . . . . . . . Attaching the Battery . . . . . . . . . . . . . . Removing the Battery . . . . . . . . . . . . . Attaching the Antenna . . . . . . . . . . . . . Removing the Antenna . . . . . . . . . . . . Attaching the Belt Clip . . . . . . . . . . . . . Removing the Belt Clip . . . . . . . . . . . . Turning the Radio On or Off . . . . . . . . . . . Adjusting the Volume . . . . . . . . . . . . . . . . Selecting a Radio Channel . . . . . . . . . . . . Sending a Call . . . . . . . . . . . . . . . . . . . . . Receiving a Call . . . . . . . . . . . . . . . . . . . . Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . Radio Calls . . . . . . . . . . . . . . . . . . . . . . . 23 Repeater or Talkaround Mode . . . . . . . . . Setting Tight or Normal Squelch. . . . . . . . Setting the Power Level . . . . . . . . . . . . . . Receiving a Selective Call . . . . . . . . . . . . Receiving a Call Alert Page . . . . . . . . . . . 23 23 23 24 24 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Starting or Stopping Scan. . . . . . . . . . . . . Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting a Nuisance Channel . . . . . . . . . . Restoring a Channel to the Scan List . Prioritizing a Scan List Member . . . . . . . . 25 25 25 25 26 English Non-displayTOC.fm Page 2 Thursday, September 19, 2002 4:59 PM CONTENTS Accessories . . . . . . . . . . . . . . . . . . . . . . 27 Carry Accessories. . . . . . . . . . . . . . . . . . . Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . Headsets . . . . . . . . . . . . . . . . . . . . . . . . . Surveillance Accessories . . . . . . . . . . . . . Remote Speaker Microphones . . . . . . . . . Antennas . . . . . . . . . . . . . . . . . . . . . . . . . English 27 27 27 28 28 29 29 COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. 10_SafetyNA..fm Page 3 Thursday, September 19, 2002 4:59 PM SAFETY AND WARRANTY PRODUCT SAFETY AND RF EXPOSURE COMPLIANCE Caution Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68P81095C98) to ensure compliance with RF energy exposure limits. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/cgiss/ index.shtml. Charging Batteries This product is powered by a nickel-cadmium (NICd) or lithium-ion (Lilon) rechargeable battery. Charge the battery before use to ensure optimum capacity and performance. The battery was designed specifically to be used with a Motorola charger. Charging in nonMotorola equipment may lead to battery damage and void the battery warranty. SAFETY AND WARRANTY ATTENTION! BATTERY INFORMATION Note: When charging a battery attached to a radio, turn the radio off to ensure a full charge. The battery should be at about 77°F (25°C) (room temperature), whenever possible. Charging a cold battery (below 50° F [10°C]) may result in leakage of electrolyte and ultimately in failure of the battery. Charging a hot battery (above 95°F [35°C]) results in reduced discharge capacity, affecting the performance of the radio. Motorola rapid-rate battery chargers contain a temperaturesensing circuit to ensure that batteries are charged within the temperature limits stated above. English 10_SafetyNA..fm Page 4 Thursday, September 19, 2002 4:59 PM LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: SAFETY AND WARRANTY MOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA manufactured Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below: CP200 Portable Unit Product Accessories Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. English One (1) Year One (1) Year This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. 10_SafetyNA..fm Page 5 Thursday, September 19, 2002 4:59 PM II. GENERAL PROVISIONS: SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE: You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola at 1-800-927-2744 US/Canada. SAFETY AND WARRANTY This warranty sets forth the full extent of MOTOROLA's responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLA’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. STATE LAW RIGHTS: English 10_SafetyNA..fm Page 6 Thursday, September 19, 2002 4:59 PM SAFETY AND WARRANTY V. WHAT THIS WARRANTY DOES NOT COVER: English A Product which, due to illegal or unauthorized alteration of the software/ firmware in the Product, does not function in accordance with MOTOROLA’s published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. Defects or damage resulting from use of the Product in other than its normal and customary manner. Defects or damage from misuse, accident, water, or neglect. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. Breakage or damage to antennas unless caused directly by defects in material workmanship. Normal and customary wear and tear. VI. PATENT AND SOFTWARE PROVISIONS: A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorola's normal warranty inspection and testing of the Product to verify any warranty claim. MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following: Product which has had the serial number removed or made illegible. Freight costs to the repair depot. that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim; 10_SafetyNA..fm Page 7 Thursday, September 19, 2002 4:59 PM that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and should the Product or parts become, or in MOTOROLA’s opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. SAFETY AND WARRANTY VII. GOVERNING LAW: This Warranty is governed by the laws of the State of Illinois, USA. English 10_SafetyNA..fm Page 8 Thursday, September 19, 2002 4:59 PM SAFETY AND WARRANTY Notes: English 03_Overview.fm Page 9 Thursday, September 19, 2002 5:01 PM RADIO OVERVIEW PARTS OF THE RADIO CP200™ Model On/Off/Volume Knob Push-to-Talk (PTT) Button Channel Selector Knob LED Indicator Side Button 1 (programmable) RADIO OVERVIEW Side Button 2 (programmable) Microphone Accessory Connector with a Dust Cover English 03_Overview.fm Page 10 Thursday, September 19, 2002 5:01 PM On/Off/Volume Knob Basic Features Turns the radio on or off, and adjusts the radio’s volume. Radio Call Channel Selector Knob Red Sending message Switches the radio to different channels. Flashing Red Receiving message LED State/Color Indication Scan Push-to-Talk (PTT) Button Flashing Green Press and hold down this button to talk; release it to listen. Call Alert Microphone When sending a message, hold the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth, and speak clearly into it. Double Flash Yellow Scanning for activity Indicates receiving Call Alert Selective Call Double Flash Yellow Indicates receiving Select Call Sticky Monitor LED Indicator RADIO OVERVIEW Indicates power-up, TX, RX, scan status, Call Alert™, Selective Call, and battery status. While monitoring and upon channel change Low Battery Flashing Red when sending message 10 English Yellow Low battery level 03_Overview.fm Page 11 Thursday, September 19, 2002 5:01 PM Battery Charge Status You can check battery charge status by holding down the preprogrammed Battery Gauge button. The charge status is shown by the color of the radio’s LED indicator. Battery Level LED Indicator High Green Sufficient Yellow Low Flashing Red Very Low None Programmable Buttons • short press — quickly pressing and releasing the programmable buttons • long press — pressing and holding the programmable buttons for a period of time (default 1 1/2 seconds or programmed value) before releasing • hold down — pressing and holding down the programmable buttons while checking status or making adjustments Depending on how your radio has been programmed by your dealer, these functions are activated EITHER through a short press OR a long press, but NOT both. A summary of programmable radio features and corresponding page references appears beginning on page 12. In the “Feature” column, have your dealer write down the programmable buttons next to the features that have been programmed to them. RADIO OVERVIEW The two side buttons on your radio can be programmed by your dealer as shortcuts to various radio features. Check with your dealer for a complete list of functions your radio supports. Each button can be programmed to select features, depending on the type of button press: 11 English 03_Overview.fm Page 12 Thursday, September 19, 2002 5:01 PM Feature RADIO OVERVIEW Battery Gauge — Hold Down Page Checks the battery charge status. 11 Sticky Permanent Monitor A long press of the Monitor button Monitors the selected channel for initiates. A short press of the Moniany activity. tor button cancels. 21 Volume Set Sounds a tone for adjusting the radio’s volume level. 20 Power Level Toggles your radio’s transmit power level between High and Low power. — 23 Repeater/ Talkaround Toggles between using a repeater and transmitting directly to another radio. — 23 Squelch Toggles your radio’s squelch level between tight and normal squelch. — 23 Scan Starts or stops the Scan operation. — 25 Nuisance Channel Delete Deletes a nuisance channel while scanning. — 25 12 English Short Press/Long Press Button 03_Overview.fm Page 13 Thursday, September 19, 2002 5:01 PM INDICATOR TONES High pitched tone Low pitched tone AUDIO INDICATORS FOR PROGRAMMABLE BUTTONS Some programmable buttons use tones to indicate one of two modes: Self Test Pass Tone Button Self Test Fail Tone Negative Indicator Tone Scan Start scan Stop scan Power Level High power selected Low power selected Squelch Tight squelch Normal squelch Repeater/ Talkaround Does not use repeater Uses repeater Positive Indicator Tone Negative Indicator Tone Positive Indicator Tone RADIO OVERVIEW 13 English 03_Overview.fm Page 14 Thursday, September 19, 2002 5:01 PM IMPROVED AUDIO FEATURES Companding RADIO OVERVIEW Companding is a feature that allows further improvement of voice quality. It compresses your voice at transmission, and expands it when receiving while simultaneously reducing extraneous noise. However, to enjoy this benefit, all transmitting and receiving radios must have this feature activated. 14 English 04_GetStarted.fm Page 15 Friday, September 20, 2002 9:45 AM To Charge the Battery Turn the radio off. Lift the dust cover to expose the audio accessory connector. Insert the charging adapter into the accessory connector. Plug the charging adapter into an electrical outlet. GETTING STARTED GETTING STARTED BATTERY INFORMATION Charging Your Battery If a battery is new, or its charge level is very low, you will need to charge it before you can use it. When the battery level is low and the radio is in transmit mode you will see the LED indicator flash red. Upon release of the PTT button, you will hear an alert tone. • Note: Batteries are shipped uncharged from the factory. Always charge a new battery 14 to 16 hours before initial use, regardless of the status indicated by the charger. Note: Do not use the wall charger and desktop charger at the same time when charging. Wall Charger Note: Do not use the wall charger if using a lithium-ion battery. The wall charger is for nickel-cadmium (NiCd) batteries only. The LED on the charging adapter lights Red while the charger is plugged into an electrical outlet. Note: Do not leave the charger connected to the radio when it is not connected to the electrical outlet. Unplug the charger from the electrical outlet and radio after 10 hours. Note: After the initial charge of 14 to 16 hours, do not charge the battery more than 10 hours. 15 English GETTING STARTED 04_GetStarted.fm Page 16 Friday, September 20, 2002 9:45 AM Desktop Charger To Charge the Battery Turn the radio off. Place the battery, with or without the radio, in the charger pocket. • The charger LED indicates the charging progress. LED color Status Battery 90% (or more) charged. Green Battery fully charged. * Remove the battery from the charger and use a pencil eraser to clean the three metal contacts at the back of the battery. Place the battery back in the charger. If the LED indicator continues to flash red, replace the battery. † A standard battery may require 90 minutes to charge to 90% capacity. Status No LED Indication Battery inserted incorrectly or battery not detected. Single Green Flash Successful charger power-up. Flashing Red* Battery unchargeable or not making proper contact. Red Battery is charging. Flashing Yellow Battery in charger but waiting to be charged. The battery temperature may be too hot or too cold. The voltage may be lower than the predetermined threshold level for charging. 16 English LED color Flashing Green† A list of Motorola authorized batteries and battery chargers appears on page 27. The listed chargers will charge only Motorola authorized batteries. Other batteries may not charge. 04_GetStarted.fm Page 17 Friday, September 20, 2002 9:45 AM Removing the Battery GETTING STARTED ACCESSORY INFORMATION Attaching the Battery Battery Latch Align the battery to the battery rails on the back of the radio (approximately 1/2 in. from the top of the radio.) Press the battery firmly to the radio and slide the battery upward until the latch snaps into place. Slide the battery latch, located on radio bottom, into the lock position. Turn off the radio if it is turned on (see page 20). Slide the battery latch into the unlock position. Disengage by pushing downward and holding the latch towards the front of the radio. With the battery latch disengaged, slide the battery down from the top of the radio about 1/2 in. Once the battery is free from the battery rails, lift it directly away from the radio. 17 English GETTING STARTED 04_GetStarted.fm Page 18 Friday, September 20, 2002 9:45 AM Attaching the Antenna Turn the antenna clockwise to attach it. 18 English Removing the Antenna Turn the antenna counter-clockwise to remove it. 04_GetStarted.fm Page 19 Friday, September 20, 2002 9:45 AM Removing the Belt Clip GETTING STARTED Attaching the Belt Clip Belt Clip Tab Align the grooves of the belt clip with those of the battery. Use a key to press the belt clip tab away from the battery to unlock the belt clip. Press the belt clip downward until you hear a click. Slide the belt clip upward to remove it. 19 English GETTING STARTED 04_GetStarted.fm Page 20 Friday, September 20, 2002 9:45 AM TURNING THE RADIO ON OR OFF ON Turn the On/Off/ Volume Control knob clockwise. If power-up is successful, you will hear the Self-Test Pass Tone ) and see the LED flash green. If the radio fails to power up, you will hear the Self Test Fail Tone ). 20 English OFF Turn the On/Off/ Volume Control knob counter-clockwise until you hear a click. ADJUSTING THE VOLUME Hold down the Volume Set button (see page 12); you will hear a continuous tone. Turn the On/Off/Volume Control knob to the desired volume level. Release the Volume Set button. SELECTING A RADIO CHANNEL Your radio offers 4 or 16 channels. Note: Due to government regulations, some channels may not be programmed. Ask your dealer for more information. To select a channel, turn the Channel Selector knob clockwise or counterclockwise until you reach the desired channel. 04_GetStarted.fm Page 21 Friday, September 20, 2002 9:45 AM Turn your radio on. Use the Channel Selector knob to select the desired channel. Hold the radio in a vertical position, press the PTT, and talk at a distance of about 1 to 2 inches (2.5 to 5 cm) from the microphone. Release the PTT to listen. RECEIVING A CALL Turn your radio on. Adjust the radio’s volume (see page 20). Switch to the desired channel. To respond, hold the radio in a vertical position, press the PTT, and talk at a distance of about 1 to 2 inches (2.5 to 5 cm) from the microphone. MONITORING GETTING STARTED SENDING A CALL It is important to monitor traffic before transmitting to ensure that you do not “talk over” someone who is already transmitting. Momentarily press the preprogrammed Monitor button to access channel traffic. Once channel traffice has cleared, proceed with your call by pressing the PTT button. To place the radio in open squelch mode, press and hold the preprogrammed Monitor button until you hear a high-pitched tone. Momentarily press the Monitor button to return to normal operation. 21 English GETTING STARTED 04_GetStarted.fm Page 22 Friday, September 20, 2002 9:45 AM Notes: 22 English 05_RadioCall.fm Page 23 Thursday, September 19, 2002 5:11 PM RADIO CALLS In this case, normal squelch may be more desirable. Press the preprogrammed Squelch button (see page 12) to toggle between tight and normal squelch. Talkaround Mode enables you to communicate with another radio when either: SETTING THE POWER LEVEL • the repeater is not operating Each channel in your radio has a predefined transmit power level that can be changed. —or— • your radio is out of the repeater’s range but within communicating distance of another radio. High power allows you to reach a radio that is farther away. • Low power conserves the battery’s charge. • Press the preprogrammed Repeater/ Talkaround button (see page 12) to toggle between Repeater mode and Talkaround Mode. Press the preprogrammed Power Level button (see page 12) to toggle between low and high power. RADIO CALLS REPEATER OR TALKAROUND MODE SETTING TIGHT OR NORMAL SQUELCH Use this feature to filter out nuisance (unwanted) calls and/or background noise. However, tightening squelch could cause calls from remote locations to be filtered out as well. 23 English 05_RadioCall.fm Page 24 Thursday, September 19, 2002 5:11 PM RECEIVING A SELECTIVE CALL When you receive a selective call: • The LED indicator flashes yellow, if programmed by your dealer. • You hear two alert tones. To answer the call, press the PTT button. RADIO CALLS RECEIVING A CALL ALERT PAGE When you receive a Call Alert page: • The LED indicator flashes yellow, if programmed by your dealer. • You hear a recurring set of tones. To answer the page, press the PTT button; to cancel the page, press any other key. 24 English 06_Scan.fm Page 25 Thursday, September 19, 2002 5:12 PM SCAN You can monitor multiple channels and receive any calls that are transmitted on them. Channels can be programmed into a scan list by your dealer. Your radio automatically switches to a scan list channel when it detects activity on it. STARTING OR STOPPING SCAN The LED indicator blinks green during a scan operation and stops blinking when the radio switches to a channel. To start or stop a scan operation, press the preprogrammed Scan button (see page 12). TALKBACK Note: Your dealer must have preprogrammed a button to Nuisance Delete (see page 12) to access this feature. If a channel continually generates unwanted calls or noise (a “nuisance” channel), you can temporarily remove it from the scan list: While the radio is on the Nuisance Channel, press the preprogrammed Nuisance Channel Delete button until you hear a tone. Release the Nuisance Channel Delete button. The nuisance channel is deleted. Note: You cannot delete a priority channel or last remaining channel in the scan list. Restoring a Channel to the Scan List Press the Scan button to stop the scan. Press the Scan button again to start scanning again. The Deleted Nuisance Channel is restored to the scan list. SCAN If the Talkback option is preprogrammed, you can respond to any calls received during the scan operation. To respond, press the PTT before the programmed hangtime elapses. Otherwise, the radio will continue scanning. Check with your dealer for details. DELETING A NUISANCE CHANNEL 25 English 06_Scan.fm Page 26 Thursday, September 19, 2002 5:12 PM PRIORITIZING A SCAN LIST MEMBER You may want your radio to scan a specific channel more frequently for calls. Your dealer can prioritize scan list members for you. Check with your dealer for details. Priority Channel Scanning Sequence None specified Ch1➠Ch2➠Ch3➠ Ch4➠...Ch1 Channel 2 Ch2➠Ch1➠Ch2➠Ch3➠ Ch2➠Ch4➠Ch2➠...Ch1 SCAN Even though your radio has switched to a nonpriority channel, it will still check for activity on the priority channel. If activity is detected, the radio will switch to the priority channel. 26 English 11_Accessory.fm Page 27 Thursday, September 19, 2002 5:12 PM Motorola offers a number of accessories to enhance the productivity of your two-way radio. Many of the available accessories are listed below. For a complete list, see your Motorola dealer. CARRY ACCESSORIES HLN9701 Nylon Case with Belt Loop and D-Shaped Rings RLN5383 Hard Leather Case with Belt Loop and D-Shaped Rings RLN5384 Hard Leather Case with High Activity 2-1/2 inch Swivel Belt Loop RLN5385 Hard Leather Case with High Activity 3 inch Swivel Belt Loop PMLN4124 2-1/2 inch Belt Clip HLN8255 Spring 3 inch Belt Clip HLN6602 Universal Chest Pack 15-05596Z02 Replacement Strap for HLN6602 Universal Chest Pack RLN4570 Universal Break-A-Way Chest Pack RLN4815 Universal RadioPak 42-80384F89 Replacement Belt Lengthener for RLN4815 Universal RadioPak NTN5243 Shoulder Strap for Hard Leather Cases (attaches to D-Shaped Rings on case) RLN4904 Mic Jacket for HMN9030 Remote Speaker Microphone ACCESSORIES ACCESSORIES CHARGERS WPLN4137 Desktop Charger Base WPLN4138 Desktop Charger w/US NA Plug BATTERIES NNTN4497_R Lilon, 1800 maH NNTN4496_R NiCd, 1100 maH 27 English 11_Accessory.fm Page 28 Thursday, September 19, 2002 5:12 PM ACCESSORIES HEADSETS RLN5411 Ultra-Lite Breeze Behind the Head Headset HMN9752 Earpiece with Volume Control, 1-Wire (plastic earloop) (Beige) HMN9013 Lightweight Headset HMN9727 RMN4016 Lightweight Headset with In-line PTT Earpiece without Volume Control, 1-Wire (plastic earloop) (Beige) RLN5238 Lightweight Headset with In-line PTT, NFL Style RLN4894 Earpiece without Volume Control, 1-Wire (plastic earloop) (Black) HMN9021 Medium Weight Over the Head Dual Muff Headset HMN9754 Earpiece with Micrphone & PTT Combined, 2-Wire (Beige) HMN9022 Medium Weight Behind the Head Dual Muff Headset RLN4895 Earpiece with Micrphone & PTT Combined, 2-Wire (Black) BDN6647 Medium Weight Single Speaker Headset RLN5198 50-80371E66 Replacement Ear Pad for BDN6647 Earpiece with Microphone & PTT Combined, 2-Wire Surveillance Kit w/ Clear Comfortable Acoustic Tube (includes NTN8371) BDN6648 Heavy Duty Dual Muff Headset with Noise Canceling Microphone RMN5015 Heavy Duty Dual Muff Racing Headset (requires RKN4090 Headset Adapter Cable) BDN6720 Flexible Ear Receiver (RX only) HMN9036 Earbud with Microphone & PTT Combined, 2-Wire (Black) HLN9132 Earbud Single Wire Receive Only Extreme Noise Kit REX4648 Ear Pad and Windscreen Kit NTN8370 RKN4090 In-Line PTT Adapter (use with RMN5015) NTN8371 Low Noise Kit RLN4760 Small Custom Clear Earpiece, Right Ear RLN4763 Small Custom Clear Earpiece, Left Ear 28 English SURVEILLANCE ACCESSORIES 11_Accessory.fm Page 29 Thursday, September 19, 2002 5:12 PM Medium Custom Clear Earpiece, Right Ear RLN4764 Medium Custom Clear Earpiece, Left Ear RLN4762 Large Custom Clear Earpiece, Right Ear RLN4765 Large Custom Clear Earpiece, Left Ear ACCESSORIES RLN4761 REMOTE SPEAKER MICROPHONES HMN9030 Remote Speaker Microphone ANTENNAS NAD6502 VHF Heliflex Antenna 14cm, 146-174 MHz HAD9742 VHF Stubby Antenna, 9cm, 146-162 MHz HAD9743 VHF Stubby Antenna, 9cm, 162-174 MHz 85-05816K25 UHF Heliflex Stubby Antenna 9cm, 438-470 MHz NAE6483 Flexible Whip Antenna, 403-520 MHz 29 English 11_Accessory.fm Page 30 Thursday, September 19, 2002 5:12 PM ACCESSORIES Notes: 30 English 12_QR-Card.fm Page 31 Thursday, September 19, 2002 5:17 PM LED Indicators CP200 Quick Reference Card LED State/Color Radio Call Red Flashing Red Indication Sending message Receiving message Scan Flashing Green Scanning for activity Low Battery Flashing Red when sending message Low battery level Call Alert Double Flash Yellow Indicates receiving a Call Alert Select Call Double Flash Yellow Indicates receiving a Selective Call Sticky Monitor Yellow While monitoring and upon channel change. Battery Charge Status Green Yellow Flashing Red None On/Off/Volume Knob Channel Selector Knob PTT SP: LP: Microphone High Sufficient Low Very Low LED Indicator SP: LP: NOTE: Enter the functions for your radio’s two programmable buttons in the boxes provided above. SP represents Short Press, while LP represents Long Press. 12_QR-Card.fm Page 32 Thursday, September 19, 2002 5:17 PM Turning On the Radio • Turn On/Off/Volume Control knob clockwise. If the radio successfully powers up, you will hear the Self Test Pass tone and see the LED light green. If the radio fails to power up, you will hear the Self Test Fail tone. Receiving a Call 1. Turn on the radio. 2. Adjust the volume level. 3. Select the radio channel. Programmable Buttons’ Audio Indicators Turning Off the Radio • Turn On/Off/Volume Control knob counterclockwise until you hear a click. Programmable Buttons Positive Indicator Tone Negative Indicator Tone Adjusting the Radio Volume 1. Press and hold Volume Set button (preprogrammed by your dealer) until you hear a continuous tone. 2. Turn On/Off/Volume Control knob to adjust volume level. 3. Release Volume Set button at desired volume level. Selecting a Radio Channel • Turn Channel Selector knob clockwise or counterclockwise to reach desired channel. Sending a Call 1. With radio on, turn Channel Selector knob to required channel. 2. Press PTT and speak clearly with mouth about 2.5 to 5 cm (1 to 2 inches) away from microphone. 3. Release PTT when call is completed. Scan Start Scan operation Stop Scan operation Power Level Radio transmits at high power Radio transmits at low power Squelch Radio operates in tight squelch Radio operates in normal squelch Repeater/ Talkaround Radio DOES NOT use the repeater Radio uses the repeater Deleting a Nuisance Channel 1. With radio on a Nuisance Channel, press and hold the preprogrammed Nuisance Delete button until you hear a tone. 2. Release the Nuisance Delete button. 309N60-O_cvr.qxd 9/12/2002 10:56 AM Page 1 MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2002. All rights reserved. Printed in U.S.A. Motorola, Le logo stylisé M, et intelligence universelle sont des marques de Motorola, Inc. © 2002 Motorola, Inc. Tous droits réservés. Imprimé aux États-Unis. Commercial Series Two-Way Radio User Guide French goes here *6880309N60* 6880309N60-O CP200
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2002:09:12 15:56:35Z Modify Date : 2002:09:20 15:16:58-05:00 Page Count : 34 Creation Date : 2002:09:12 15:56:35Z Mod Date : 2002:09:20 10:59:13-04:00 Producer : Acrobat Distiller 5.0 (Windows) Author : ckc015 Metadata Date : 2002:09:20 10:59:13-04:00 Creator : ckc015 Title : 309N60-O_cvr.qxd Has XFA : NoEXIF Metadata provided by EXIF.tools