Motorola Solutions 99FT4089 PORTABLE UHF RADIO User Manual Andorra QRG NAG LACR

Download:
Mirror Download [FCC.gov]
Document ID	1703496
Application ID	aPlT+EReFOBbcEeOJMxA0g==
Document Description	SAFETY MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	172.88kB (2161004 bits)
Date Submitted	2012-05-22 00:00:00
Date Available	2012-05-22 00:00:00
Creation Date	2011-08-26 16:18:21
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2011-09-15 17:24:36
Document Title	Andorra_QRG_NAG-LACR.book
Document Creator	FrameMaker 8.0
Document Author:	BTM876

XPRTM 3000 Series
Quick Reference
Guide and Safety
Manual
Regulatory Compliance and Product
Safety for Portable Two-Way Radios
Caution
BEFORE USING THIS RADIO, READ
THIS BOOKLET WHICH CONTAINS
IMPORTANT OPERATING
INSTRUCTIONS FOR SAFE USAGE
AND RF ENERGY AWARENESS AND
CONTROL INFORMATION AND
OPERATIONAL INSTRUCTIONS FOR
COMPLIANCE WITH RF ENERGY
EXPOSURE LIMITS IN APPLICABLE
NATIONAL AND INTERNATIONAL
STANDARDS. ALSO READ THE
OPERATIONAL INSTRUCTIONS FOR
SAFE USAGE. FOR RADIOS THAT
HAVE BEEN APPROVED AS
INTRINSICALLY SAFE, READ THE
INSTRUCTIONS AND INFORMATION
ON INTRINSIC SAFETY ON PAGE 12
OF THIS BOOKLET.
English
RF Energy Exposure Awareness and
Control Information and Operational
Instructions for Occupational Use
NOTICE:
This radio is intended for use in
occupational/controlled conditions
where users have full knowledge of their
exposure and can exercise control over
their exposure to meet the occupational
limits in FCC and International
standards. This radio device is NOT
authorized for general population
consumer use.
This two-way radio uses electromagnetic energy in
the radio frequency (RF) spectrum to provide
communications between two or more users over a
distance. It uses radio frequency (RF) energy or radio
waves to send and receive calls. RF energy is one
form of electromagnetic energy. Other forms include,
but are not limited to, sunlight and x-rays. RF energy,
however, should not be confused with these other
forms of electromagnetic energy, which when used
improperly, can cause biological damage. Very high
levels of x-rays, for example, can damage tissues and
genetic material.
Experts in science, engineering, medicine, health, and
industry work with organizations to develop standards
for safe exposure to RF energy. These standards
provide recommended levels of RF exposure for both
workers and the general public. These recommended
RF exposure levels include substantial margins of
protection.
All Motorola two-way radios are designed,
manufactured, and tested to ensure they meet
government-established RF exposure levels. In
addition, manufacturers also recommend specific
English
operating instructions to users of two-way radios.
These instructions are important because they inform
users about RF energy exposure and provide simple
procedures on how to control it.
Please refer to the following websites for more
information on what RF energy exposure is and how
to control your exposure to assure compliance with
established RF exposure limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov/SLTC/radiofrequencyradiation/
index.html
Federal Communication Commission
(FCC) Regulations
The FCC rules require manufacturers to comply with
the FCC RF energy exposure limits for portable twoway radios before they can be marketed in the U.S.
When two-way radios are used as a consequence of
employment, the FCC requires users to be fully aware
of and able to control their exposure to meet
occupational requirements. Exposure awareness can
be facilitated by the use of a product label directing
users to specific user awareness information. Your
Motorola two-way radio has a RF Exposure Product
Label. Also, your Motorola user manual, or separate
safety booklet includes information and operating
instructions required to control your RF exposure and
to satisfy compliance requirements.
Compliance with RF Exposure Standards
Your Motorola two-way radio is designed and tested
to comply with a number of national and International
standards and guidelines (listed below) for human
exposure to radio frequency electromagnetic energy.
English
This radio complies with the IEEE (FCC) and
ICNIRP exposure limits for occupational/
controlled RF exposure environments at
operating duty factors of up to 50% talk-50% listen
and is authorized by the FCC for occupational use
only. In terms of measuring RF energy for compliance
with these exposure guidelines, your radio
generates measurable RF energy only while it is
transmitting (during talking), not when it is
receiving (listening) or in standby mode.
NOTE: The approved batteries, supplied with this
radio, are rated for a 5-5-90 duty factor (5%
talk-5% listen-90% standby) even though this
radio complies with FCC occupational
exposure limits and may operate at duty
factors of up to 50% talk.
Your Motorola two-way radio complies with the
following RF energy exposure standards and
guidelines:
• United States Federal Communications
Commission (FCC), Code of Federal Regulations;
47 CFR et seq.
• FCC, OET Bulletin 65
• Institute of Electrical and Electronic Engineers
(IEEE) C95.1
• International Commission on Non-Ionizing
Radiation Protection (ICNIRP)
• Ministry of Health (Canada) Safety Code 6
• Industry Canada RSS-102
• Australian Communications Authority
Radiocommunications Standard et seq.
• ANATEL ANNEX to Resolution No. 303 et seq.
English
RF Exposure Compliance and Control
Guidelines and Operating Instructions
To control your exposure and ensure compliance with
the occupational/controlled environment exposure
limits, always adhere to the following procedures.
Guidelines:
• DO NOT remove the RF Exposure Label from the
device.
• User awareness instructions should accompany
device when transferred to other users.
• DO NOT use this device if the operational
requirements described herein are not met.
Operating Instructions
• Transmit no more than the rated duty factor of 50%
of the time. To transmit (talk), push the Push-ToTalk (PTT) button. To receive calls, release the
PTT button. Transmitting 50% of the time, or less,
is important because this radio generates
measurable RF energy exposure only when
transmitting (in terms of measuring for standards
compliance).
Two-Way Radio Operation
• Hold the radio in a vertical position in
front of the face with the microphone
(and other parts of the radio
including the antenna) at least one
inch (2.5 centimeters) away from the
nose or lips. Antenna should be kept
away from the eye. Keeping the radio at a proper
distance is important since RF exposures decrease
with increasing distance from the antenna.
English
Body Worn Operation
• When worn on the body, always place the radio in a
Motorola-approved clip, holder, holster, case, or
body harness for this product. Using approved
body-worn accessories is important because the
use of non-Motorola-approved accessories may
result in exposure levels, which exceed the FCC
occupational/controlled environment RF exposure
limits.
• DO NOT hold the antenna when the radio is
transmitting. Holding the antenna affects call quality
and may cause the radio product to operate at
higher power level than needed.
• DO NOT touch the metal surface of the antenna (in
extended position) when the radio is transmitting.
RF discomfort may result.
Approved Accessories
• Use only Motorola-approved supplied or
replacement antennas, batteries, and accessories.
Use of non-Motorola-approved antennas, batteries,
and accessories may exceed the FCC (IEEE) and
ICNIRP RF exposure guidelines.
• For a list of Motorola-approved accessories, visit
the following website, which lists approved
accessories for your radio model:
www.motorolasolutions.governmentandenterprise
Additional Information
For additional information on exposure requirements
or other training information, visit:
www.motorolasolutions.com/rfhealth
English
Electromagnetic Interference/
Compatibility
NOTE:
Nearly every electronic device is susceptible
to electromagnetic interference (EMI) if
inadequately shielded, designed, or otherwise
configured for electromagnetic compatibility.
Facilities
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your radio in any facility
where posted notices instruct you to do so. Hospitals
or health care facilities may be using equipment that is
sensitive to external RF energy.
Aircraft
When instructed to do so, turn off your radio when on
board an aircraft. Any use of a radio must be in
accordance with applicable regulations per airline
crew instructions.
Medical Devices
Pacemakers
The Advanced Medical Technology Association
(AdvaMed) recommends that a minimum separation
of 6 inches (15 centimeters) be maintained between a
handheld wireless radio and a pacemaker. These
recommendations are consistent with those of the
U.S. Food and Drug Administration.
Persons with pacemakers should:
• ALWAYS keep the radio more than 6 inches (15
centimeters) from their pacemaker when the radio
is turned ON.
• Not carry the radio in the breast pocket.
English
• Use the ear opposite the pacemaker to minimize
the potential for interference.
• Turn the radio OFF immediately if there is any
reason to suspect that interference is taking place.
Hearing Aids
Some digital wireless radios may interfere with some
hearing aids. In the event of such interference, you
may want to consult your hearing aid manufacturer to
discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult
the manufacturer of your device to determine if it is
adequately shielded from RF energy. Your physician
may be able to assist you in obtaining this information.
Use of Communication Devices While Driving
Always check the laws and regulations on the use of
radios in the areas where you drive.
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
• Pull off the road and park before making or
answering a call, if driving conditions or regulations
so require.
Acoustic Safety
Exposure to loud noises from any source for extended
periods of time may temporarily or permanently affect
your hearing. The louder the radio's volume, the less
time is required before your hearing could be affected.
Hearing damage from loud noise is sometimes
undetectable at first and can have a cumulative effect.
English
To protect your hearing:
• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy
surroundings.
• Turn down the volume before adding headset or
earpiece.
• Limit the amount of time you use headsets or
earpieces at high volume.
• When using the radio without a headset or
earpiece, do not place the radio's speaker directly
against your ear.
Operational Warnings
WARNING
For Vehicle With Air Bags:
Refer to vehicle manufacturer's
manual prior to installation of
electronic equipment to avoid
interference with air bag wiring.
DO NOT place a portable radio in the
area over an air bag or in the air bag
deployment area. Air bags inflate
with great force. If a portable radio is
placed in the air bag deployment
area and the air bag inflates, the
radio may be propelled with great
force and cause serious injury to
occupants of the vehicle.
English
WARNING
Potentially Explosive Atmospheres
(Explosive atmospheres refers to
hazard classified locations that may
contain hazardous gas, vapors, or
dusts.)
Turn off your radio prior to entering
any area with a potentially explosive
atmosphere unless it is a portable
radio type especially qualified for use
in such areas as Intrinsically Safe
(for example, Factory Mutual, CSA,
UL, or CENELEC).
DO NOT remove, install, or charge
batteries in such areas. Sparks in a
potentially explosive atmosphere can
cause an explosion or fire resulting
in bodily injury or even death.
The areas with potentially explosive
atmospheres referred to above
include fueling areas such as below
decks on boats, fuel or chemical
transfer or storage facilities, and
areas where the air contains
chemicals or particles such as grain,
dust or metal powders. Areas with
potentially explosive atmospheres
are often, but not always, posted.
English
10
Blasting Caps and Blasting Areas
To avoid possible interference with
blasting operations, turn off your radio
W A R N I N G when you are near electrical blasting
caps, in a blasting area, or in areas
posted: "Turn off two-way radio." Obey
all signs and instructions.
Operational Cautions
Caution
Antennas
DO NOT use any portable radio that has a
damaged antenna. If a damaged antenna
comes into contact with your skin, a minor
burn can result.
Batteries
All batteries can cause property damage
and/or bodily injury, such as burns, if a
conductive material such as jewelry, keys,
or beaded chains touches exposed
terminals. The conductive material may
complete an electrical circuit (short circuit)
and become quite hot. Exercise care in
handling any charged battery, particularly
when placing it inside a pocket, purse, or
other container with metal objects.
11
English
Intrinsically Safe Radio Information
The Intrinsically safe approval unit refers to a product
that has been approved as intrinsically safe by an
approval agency (for example FM Approvals, CSA,
UL, or Cenelec) and certifies that a particular product
meets the Agency's applicable intrinsic safety
standards for specific types of hazardous classified
locations. A portable radio that has been approved for
intrinsic safety will have Approval label attached to the
radio to identify the unit as being Approved for
specified hazardous atmospheres. This label specifies
the hazardous Class/Division/Group along with the
part number of the battery that must be used. The
Intrinsically Safe Approval Label will be located on the
portable radio unit.
Operational Cautions for Intrinsic Safe
Equipment
• DO NOT operate radio communications
equipment in a hazardous atmosphere
unless it is a type especially qualified
(for example, FM, UL, CSA, or
Caution
CENELEC approved). An explosion or
fire may result.
English
12
Operational Cautions for Intrinsic Safe
Equipment
Caution
• DO NOT operate a radio unit that has
been approved as intrinsically safe
product in a hazardous atmosphere if it
has been physically damaged (for
example, cracked housing). An
explosion or fire may result.
• DO NOT replace or charge batteries in
a hazardous atmosphere. Contact
sparking may occur while installing or
removing batteries and cause an
explosion or fire.
Warnings for Radios Approved as
Intrinsically Safe
Radios must ship from the Motorola manufacturing
facility with the hazardous atmosphere capability and
the intrinsic safety approval labelling (FM, UL, CSA,
CENELEC). Radios will not be upgraded to this
capability and labeled once they have been shipped
to the field.
A modification changes the unit’s hardware from its
original design configuration. Modifications can only
be made by the original product manufacturer.
13
English
WARNING
English
• DO NOT replace or change
accessories in a hazardous
atmosphere. Contact sparking may
occur while installing or removing
accessories and cause an explosion
or fire.
• Turn the radio off before removing or
installing a battery or accessory.
• DO NOT disassemble an intrinsically
safe product in any way that exposes
the internal circuits of the unit.
• Failure to use an intrinsically safe
approved battery or Approved
accessories specifically approved for
the radio unit may result in the
dangerously unsafe condition of an
unapproved radio combination being
used in a hazardous location.
• Unauthorized or incorrect
modification of the intrinsically safe
approved Product will negate the
approval rating of the product.
• Incorrect repair or relabeling of any
intrinsically safe Agency-approved
radio could adversely affect the
Approval rating of the unit.
14
WARNING
• Use of a radio that is not intrinsically
safe in a hazardous atmosphere
could result in serious injury or
death.
Repair
REPAIRS FOR MOTOROLA PRODUCTS
WITH INTRINSICALLY SAFE
APPROVAL ARE THE
W A R N I N G RESPONSIBILITY OF THE USER.
Repairs to a Motorola FM approved
radio product should only be done at a
location that has been FM audited under
the FM 3605 repairs and service
standard.
Contact Motorola for assistance
regarding repairs and service of
Motorola intrinsically safe equipment.
15
English
A repair constitutes something done internally to the
unit that would bring it back to its original condition.
Items not considered as repairs are those in which an
action is performed on a unit which does not require
the outer casing of the unit to be opened in a manner
that exposes the internal electrical circuits of the unit.
Do Not Substitute Options or Accessories
The Motorola communications equipment certified as
intrinsically safe by the approving agency, (FM, UL,
CSA, CENELEC) is tested as a complete system
which consists of the listed agency Approved
portable, Approved battery, and Approved
accessories or options, or both. This Approved
portable and battery combination must be strictly
observed. There must be no substitution of items,
even if the substitute has been previously Approved
with a different Motorola communications equipment
unit. Approved configurations are listed by the
Approving Agency (FM, UL, CSA, CENELEC).
The Intrinsically Safe Approval Label affixed to radio
refers to the intrinsically safe classification of that
radio product, and the approved batteries that can be
used with that system.
The manual PN referenced on the Intrinsically Safe
Approval Label identifies the approved Accessories
and or options that can be used with that portable
radio unit.
Using a non-Motorola-intrinsically-safe battery and
or accessory with the Motorola approved radio
unit will void the intrinsically safe approval of that
radio unit.
English
16
m
XPR 3000 Series Digital Portable
Radios Quick Reference Card
Radio Controls
Limited Keypad Radio
NOTE: Refer to User Guide for more details on your
radio's operations/features.
Record your radio’s programmable button functions in
the blanks provided. SP represents short press, LP
represents long press.
18
17
16
15
10
14
13
12
11
17
English

Non-Keypad Radio
18
17
16
English
Channel Selector Knob
On/Off/Volume Control Knob
LED Indicator
Push-to-Talk (PTT) Button
Microphone
Side Button 1 (Programmable)
SP: ____________LP: ___________
18
7
Side Button 2(Programmable)
Left Navigation Button
SP: ___________ LP: ___________
Menu Button
10
Front Button P1 (Programmable)
11
12
OK Button
13
Back/Home Button
14
15
Right Navigation Button
16
17
18
Speaker
SP: ___________ LP: ___________
Front Button P2 (Programmable)
SP: ___________ LP: ___________
Display
Universal Connector for Accessories
Antenna
19
English
Display Icons
The following are the icons that appear on the
radio’s display.
Received Signal Strength Indicator
(RSSI)
The number of bars displayed represents
the radio signal strength. Four bars indicate the strongest signal. This icon is only
displayed while receiving.
Battery
The number of bars (0 – 4) shown indicates the charge remaining in the battery.Blinks when the battery is low.
Emergency
Radio is in Emergency mode.
Notifications
Notification list is not empty.
Scan*
Scan feature is enabled.
English
20
Scan – Priority 1*
Radio detects activity on channel/group
designated as Priority 1.
Scan – Priority 2 *
Radio detects activity on channel/group
designated as Priority 2.
Vote Scan
Vote scan feature is enabled.
Monitor
Selected channel is being monitored.
Talkaround*
In the absence of a repeater, radio is currently configured for direct radio to radio
communication.
Site Roaming*
The site roaming feature is enabled.
Secure
The Privacy feature is enabled.
Unsecure
The Privacy feature is disabled.
21
English
Tones Disable
Tones are turned off.
OR
Power Level
Radio is set at Low power.
Radio is set at High power.
Call Icons
The following icons appear during a call, and in the
Contacts list to indicate ID type.
Private Call
Indicates a Private Call in progress.
In the Contacts list, it indicates a
subscriber alias (name) or ID (number).
Group Call/All Call
Indicates a Group Call or All Call in progress.
In the Contacts list, it indicates a group
alias (name) or ID (number).
English
22
Sent Items Icons
The following icons appear at the top right corner of
the radio’s display in the Sent Items folder.
OR
Sent Successfully
The text message is sent successfully.
OR
Send Failed
The text message cannot be sent.
OR
In-Progress
•The text message to a subscriber alias
or ID is pending transmission, followed
by waiting for acknowledgement.
•The text message to a group alias or ID
is pending transmission.
23
English
LED Indicator
Blinking red – Radio is transmitting at low battery
condition, receiving an emergency transmission or
has failed the self-test upon powering up.
Solid green – Radio is powering up, or transmitting.
Also indicates full charge of the battery when Battery
Strength button is pressed.
Blinking green – Radio is receiving a non-privacyenabled call or data, or detecting activity over the air.
Double blinking green – Radio is receiving a
privacy-enabled call or data .
Solid yellow – Radio is monitoring a conventional
channel.
Blinking yellow – Radio is scanning for activity or
receiving a Call Alert.
Double blinking yellow – Radio is no longer
connected to the repeater while in Capacity Plus, all
Capacity Plus channels are currently busy, Auto
Roaming is enabled, radio is actively searching
for a new site. Also indicates radio has yet to
respond to a group call alert, or radio is locked.
NOTE:
English
For Capacity Plus, there is no LED indication
when the radio is detecting activity over the
air.
24
Charging the Battery
Your radio is powered by a Nickel Metal-Hydride
(NiMH) or Lithium-Ion (Li-lon) battery. To avoid
damage and comply with warranty terms, charge the
battery using a Motorola charger exactly as described
in the charger user guide.
Charge a new battery 14 to 16 hours before initial use
for best performance.
IMPORTANT: ALWAYS charge your IMPRES battery
with an IMPRES charger for optimized
battery life and valuable battery data.
IMPRES batteries charged exclusively
with IMPRES chargers receive a 6month capacity warranty extension over
the standard Motorola Premium battery
warranty duration.
25
English
Attaching the Battery
Align the battery with the rails on the back of the radio.
Press the battery firmly, and slide upward until the
latch snaps into place. Slide battery latch into lock
position.
To remove the battery, turn the radio off. Move the
battery latch into unlock position and hold, and slide
the battery down and off the rails.
Battery Latch
English
26
Attaching the Antenna
With the radio turned off, set the antenna in its
receptacle and turn clockwise.
Make sure that the antenna is tightened securely to
the radio.
To remove the antenna, turn the antenna
counterclockwise.
27
English
Attaching the Belt Clip
Align the grooves on the clip
with those on the battery and
press downward until you hear
a click.
To remove the clip, press the
belt clip tab away from the
battery. Using a key may be
helpful. Then slide the clip
upward and away from the
radio.
English
28
Attaching the Universal Connector
Cover (Dust Cover)
The universal connector is located on the antenna
side of the radio. It is used to connect MOTOTRBO
accessories to the radio.
Insert the hooked
end of the cover into
the slots above the
universal connector.
Press downward on
the cover to seat the
lower tab properly
into the RF
connector.
Universal
Connector
Turn the
thumbscrew
clockwise to secure
the connector cover to the radio.
To remove the universal connector cover, press down
on the cover and turn the thumbscrew
counterclockwise. Lift the cover up, slide the
connector cover loop upwards, and remove it from the
attached antenna.
Replace the dust cover when the universal connector
is not in use.
29
English
Powering Up the Radio
Rotate the On/Off/Volume Control Knob clockwise
until you hear a click. You see MOTOTRBO (TM) on the
radio’s display momentarily, followed by a welcome
message or welcome image.
The LED lights up solid green and the Home screen
lights up if the backlight setting is set to turn on
automatically.
*If enabled, a brief tone sounds indication that the
power up test is successful.
*To turn off the radio, rotate the knob clockwise until
you hear a click.
Adjusting the Volume
To increase the volume, turn the On/Off Volume
Control Knob clockwise.
To decrease the volume, turn this knob
counterclockwise.
NOTE:
English
Your radio can be programmed to have a
minimum volume offset where the volume
level cannot be turned down fully. Check
with your dealer or system administrator for
more information.
30
Accessing the Radio from Password
 Limited Keypad Radio
1. Power up the radio.
2. You will be prompt to enter a four-digit password.
3. Enter your current four-digit password. Press <
or > to choose each digit’s numeric value (0-9).
Press > or c to move to next digit. Each digit
changes to ●. Press e to confirm your selection.
You hear a positive indicator tone for every digit
pressed. Press < to remove the each ● on the
display.
4. If the password is correct:
Your radio proceeds to power up. See Powering
Up the Radio on page 30 .
OR
If the password is incorrect:
The display shows Wrong Password. Repeat
Step2.
OR
After the third incorrect password, the display
shows Wrong Password and then shows Radio
Locked. A tone sounds and the LED double blinks
yellow.
31
English
 Non-Keypad Radio
1. Power up the radio.
2. You hear a continuous tone.
3. Use the Channel Selector Knob to enter the first
digit of the password.
4. Press Side Button 1 or 2 to enter each digit of the
remaining three digits of the password. You hear a
positive indicator tone for each Side Button press.
When the second digit of the password is entered,
your radio ignores any Channel Selector Knob
position change.
5. When the last digit of the four-digit password is
entered, your radio automatically checks the validity of the password.
If the password is correct:
Your radio proceeds to power up. See Powering
Up the Radio on page 30.
OR
If the password is incorrect:
You hear a continuous tone. Repeat Steps 1 to 3.
OR
After the third incorrect password, your radio
enters into locked state. A tone sounds and the
LED double blinks yellow.
Selecting a Zone
Limited Keypad Radio
English
32
A zone is a group of channels. The limited keypad
radio supports up to 50 channels and 128 zones, with
a maximum of 16 channels per zone.
Use the following procedure to select a zone.
Procedure:
Press the programmed Zone button and proceed to
Step 3.
OR
Follow the procedure below.
1. c to access the menu.
2. < or > to Zone and press e to select.
3. The current zone is displayed and indicated by a
9.
4. < or > to the required zone and press e to
select.
5. The display shows  Selected momentarily and returns to the selected zone screen.
Non-Keypad Radio
The non keypad radio supports up to 16 channels
and16 zones, with a maximum of 1 channel per zone.
1. Press the programmed Zone button.
2. You hear a positive indicator tone, indicating the
radio has switched from Zone 1 to Zone 2.
OR
You hear a negative indicator tone, indicating the
radio has switched from Zone 2 to Zone 1.
33
English
Selecting a Radio Channel,
Subscriber ID, or Group ID
Once the required zone is displayed (if you have multiple zones in your radio), turn the programmed Channel Selector Knob to select the channel.
Making a Group Call
1. Turn the Channel Selector Knob to select the
channel with the active group alias or ID.
2. Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3. Press the PTT button to make the call. The LED
lights up solid green. The first text line shows the
group call icon. The second text line shows the
group call alias,
4. Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled)
and speak clearly into the microphone.
5. Release the PTT button to listen.When the target
radio responds, the LED blinks green. You see the
Group Call icon, the group alias or ID, and transmitting radio alias or ID on your display.
6. If the Channel Free Indication feature is enabled,
you will hear a short alert tone the moment the
target radio releases the PTT button, indicating the
English
34
channel is free for you to respond. Press the PTT
button to respond.
OR
If there is no voice activity for a predetermined
period of time, the call ends.
7. Radio returns to the screen you were on prior to
initiating the call.
Making a Private Call
1. Turn the Channel Selector Knob to select the
channel with the active subscriber alias or ID.
2. Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3. Press the PTT button to make the call. The LED
lights up solid green. The first text line shows the
private call icon. The second text line displays the
private call alias.
4. Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
5. Release the PTT button to listen. When the target
radio responds, the LED blinks green.
6. If the Channel Free Indication feature is enabled,
you will hear a short alert tone the moment the target radio releases the PTT button, indicating the
channel is free for you to respond. Press the PTT
button to respond.
OR
35
English
If there is no voice activity for a predetermined
period of time, the call ends.
7. You hear a short tone.
8. The display shows Call Ended.**
NOTE:
Indicates a conventional Digital ModeOnly feature.
**not applicable for Non-Keypad Radio.
Making an All Call
1. Turn the Channel Selector Knob to select the
channel with the active All Call group alias or ID.
2. Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3. Press the PTT button to make the call. The LED
lights up solid green. The Group Call icon appears
in the top right corner. The first text line shows
All Call.
4. Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled)
and speak clearly into the microphone.
Users on the channel cannot respond to an All Call.
English
36
Scanning Channels
NOTE:
This feature is not applicable in Capacity
Plus.
Press the programmed Scan button to turn scan on or
off.
During scan, the LED blinks yellow and the scan icon
is displayed.
Making a Call Alert
Limited Keypad Radio
Press the programmed One Touch Access button
and proceed to Step 5.
OR
Follow the procedure below.
1. c to access the menu.
1. < or > to Contacts and press e to select.
1. < or > to the required subscriber alias or ID
and press e to select.
1. < or > to Call Alert and press e to select.
1. The display shows Call Alert and the subscriber
alias or ID, indicating that the Call Alert has been
sent.
1. The LED lights up solid green when your radio is
sending the Call Alert.
37
English
1. If the Call Alert acknowledgement is received, the
display shows positive mini notice.
OR
If the Call Alert acknowledgement is not received,
the display shows negative mini notice.
 Non-Keypad Radio
1. Press the programmed One Touch Access button to make a Call Alert to the predefined ID.
2. The LED lights up solid green when your radio is
sending the Call Alert.
3. If the Call Alert acknowledgement is received, two
chirps sound.
OR
If the Call Alert acknowledgement is not received,
a low-pitch tone sounds.
Sending a Quick Text Message
Limited Keypad Radio
Press the programmed Text Message button and
proceed to Step 3.
OR
Follow the procedure below.
1. c to access the menu.
2. < or > to Messages and press e to select.
3. < or > to Quick Text and press e to select.
English
38
4. < or > to the required Quick Text and press e
to select.
5. < or > to the required alias or ID and press e
to select.
OR
The display shows transitional mini notice, confirming your message is being sent.
6. If the message is sent, a tone sounds and the display shows positive mini notice.
OR
If the message is not sent, a low tone sounds and
the display shows negative mini notice.
Non-Keypad Radio
You can send Quick Text messages, programmed by
your dealer, via the programmable button.
1. Press the programmed One Touch Access button to send a predefined Quick Text message to a
predefined ID.
2. The LED lights up solid green.
3. Two chirps indicate that the message is sent successfully.
OR
A low-pitch tone indicates that the message cannot be sent.
39
English
Sending an Emergency Alarm
NOTE:
If your radio is set to Silent, it will not display
any audio or visual indicators during
Emergency mode.
1. Press the programmed Emergency On button.
2. The display shows Tx Alarm and the destination
alias. The LED lights up solid green and the Emergency icon appears.
OR
The display shows Tx Telegram and the
destination alias. The LED lights up solid green
and the Emergency icon appears.
3. When an Emergency Alarm acknowledgment is
received, the Emergency tone sounds and the
LED blinks green. The display shows Alarm Sent.
OR
If your radio does not receive an Emergency Alarm
acknowledgement, and after all retries have been
exhausted, a tone sounds and the display shows
Alarm Failed.
4. Radio exits the Emergency Alarm mode and
returns to the Home screen.
NOTE:
English
Indicates a conventional Analog modeonly feature.
40
41
English
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the
Stylized M logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC and are used under
license. All other trademarks are the property of their
respective owners.
© 2011 Motorola Solutions, Inc.
All rights reserved.
Motorola Solutions, Inc.
1303 East Algonquin Road
Schaumburg, IL 60196 U.S.A.
*68009511001*
68009511001-A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Mode                       : UseNone
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : FrameMaker 8.0
Modify Date                     : 2011:09:15 17:24:36+08:00
Create Date                     : 2011:08:26 16:18:21Z
Metadata Date                   : 2011:09:15 17:24:36+08:00
Format                          : application/pdf
Title                           : Andorra_QRG_NAG-LACR.book
Creator                         : BTM876
Document ID                     : uuid:e23b95a7-8d9c-4ab4-bcbf-a7ff1d451740
Instance ID                     : uuid:b3699b85-df82-4a5f-bc59-f02d9e914e08
Has XFA                         : No
Page Count                      : 44
Author                          : BTM876

EXIF Metadata provided by EXIF.tools