Motorola Solutions 99FT5000 HT1250LS+ 700MHz Portable Radio User Manual

Download:
Mirror Download [FCC.gov]
Document ID	231921
Application ID	MFLRtZM1cGckeYIyUXrCpg==
Document Description	NEW User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	103.85kB (1298104 bits)
Date Submitted	2002-03-19 00:00:00
Date Available	2002-07-08 00:00:00
Creation Date	2001-11-20 12:09:59
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2002-01-25 16:05:13
Document Title	Untitled Document
Document Creator	Windows NT 4.0

SCAN
Zone
Your radio is equipped with the Scan feature,
which allows you to search for, lock onto, and
monitor voice activity on trunked talkgroups
and conventional channels.
PassPort
Primary
Auto Scan
Conventional
PassPort
Group
Scan
LTR
Auto
Group
Scan
LTR All
Group
Scan
System
Scan
•
Auto Group Scan
TALKBACK
•
All Group Scan
•
PassPort Primary Auto Scan
•
Passport Group Scan
•
System Scan
When activity is detected during any type of
scan, scanning stops and the active talkgroup
or channel appears and remains on the display
until scanning resumes. Your dealer can
program the amount of time you can respond
(or “TALKBACK”) to the caller before your radio
resumes scanning.
The table below summarizes the Scan types
available in each zone type.
Zone
PassPort
Trunked
LTR
Trunked
PassPort
Primary
Auto Scan
PassPort
Group
Scan
LTR
Auto
Group
Scan
LTR All
Group
Scan
System
Scan
SCAN
There are five types of Scan available in your
radio:
Shaded areas indicate that Scan can be
enabled through a programmable button (see
page 22) or through your radio menu.
You must press the PTT button to participate in
the call; otherwise, scanning continues to the
other talkgroups or channels.
55
English
PASSPORT PRIMARY AUTO
GROUP SCAN
When PassPort Group Scan is Enabled
•
The G symbol appears on the display.
PassPort Primary Auto Group Scan
automatically scans the primary (first)
talkgroup within the selected PassPort zone.
Any time you are positioned on a PassPort
talkgroup other than the first one, your radio
automatically scans activity on the first
talkgroup within that zone.
•
The LED indicator blinks green during
PassPort Group Scan operation; it stops
blinking when the radio switches to an
active talkgroup or channel.
SCAN
Note:
This feature is enabled AUTOMATICALLY
with your radio. It is not enabled through
the radio menu or through a preprogrammed scan button.
Note:
•
PassPort Group Scan is not available when
registered on a non-home site.
•
If you switch to another PassPort zone, LTR,
or conventional zone while the radio is scanning, scanning resumes upon return to the
PassPort zone where PassPort Group Scan
was enabled.
•
If the radio is turned off while scanning, the
radio resumes scanning when you turn it back
on. If the radio registers on a non-home site,
scanning is not enabled until the radio registers at its home site.
PASSPORT GROUP SCAN G
(PASSPORT TRUNKED OPERATION ONLY)
PassPort Group Scan scans talkgroups within
the selected Passport trunked zone, as
programmed by your dealer. Up to 16 different
talkgroups can be programmed into each Scan
list, with one Scan list assigned to each position
on the Zone Selector knob. You can edit these
Scan lists through your radio’s menu (see page
60).
56
English
To Start or Stop PassPort Group Scan
Operation through a Preprogrammed
Button (see page 22)
AUTO GROUP SCAN G
(LTR TRUNKED OPERATION ONLY)
•
Press the preprogrammed Scan button to
start PassPort Group Scan.
•
Press the preprogrammed Scan button
again to stop the PassPort Group Scan.
Auto Group Scan automatically scans
talkgroups within an LTR trunked zone as
programmed by your dealer. Auto Group Scan
can be either non-prioritized or prioritized.
–or–
To Start or Stop PassPort Group Scan
Operation through the Menu
) to enter menu mode.
+ or ? until
3DVV*US6FDQ
) to select
3DVV*US6FDQ
Non-prioritized Auto Group Scan
automatically scans all talkgroups
programmed with Auto Group Scan.
•
Prioritized Auto Group Scan automatically
scans the selected talkgroup and all lower
4-numbered talkgroups. For example, if
talkgroups 1, 3, and 4 have been
programmed by your dealer with Auto
Group Scan and talkgroup 4 is selected,
the radio automatically scans talkgroups 1,
3, and 4, and skips talkgroup 2.
SCAN
•
You see the current scan status.
+ or ? until
–or–
3S*S6FDQ2II"
3S*S6FDQ2Q"
) to confirm your selection.
To Start Auto Group Scan
Select a talkgroup that has been programmed
for Auto Group Scan by your dealer.
Note:
You do not need to press a
preprogrammed Scan button.
57
English
•
The G symbol appears on the display
when non-prioritized Auto Group Scan has
been activated.
Note:
•
The H symbol appears on the display
when prioritized Auto Group Scan has
been activated.
To Start or Stop All Group Scan Operation
through the Menu (see page 22)
•
There is no LED indicator during Auto
Group Scan.
•
Press the preprogrammed All Group Scan
button once to start All Group Scan.
•
Press the preprogrammed All Group Scan
button again to stop All Group Scan.
SCAN
To Stop Auto Group Scan
Select a talkgroup that has not been
programmed for Auto Group Scan by your
dealer.
ALL GROUP SCAN G
If you enter menu mode while the radio is
scanning, scanning stops. It resumes when
you exit menu mode.
–or–
To Start or Stop All Group Scan Operation
through the Menu
) to enter menu mode.
+ or ? until
$OO*URXS6FDQ
) to select
$OO*URXS6FDQ
(LTR TRUNKED OPERATION ONLY)
All Group Scan scans all talkgroups within the
selected LTR trunked zone.
When All Group Scan is enabled:
•
The G symbol appears on the display.
•
The LED indicator blinks green during All
Group Scan operation; it stops blinking
when the radio switches to an active talkgroup.
You see the current scan status.
58
English
+ or ? until
$OO*URXS2Q"
–or–
$OO*URXS2II"
) to confirm your selection.
SYSTEM SCAN G
–or–
(LTR TRUNKED AND CONVENTIONAL
OPERATION)
Do the following:
System Scan scans trunked talkgroups and
conventional channels between LTR and
conventional zones, as programmed by your
dealer. Up to 16 different talkgroups or
conventional channels can be programmed
into each Scan list. You can edit these lists
through your radio’s menu (see page 60).
•
The G symbol appears on the display.
•
The LED indicator blinks green during System Scan operation; it stops blinking when
the radio switches to an active talkgroup or
channel.
Note:
If you enter menu mode while the radio is
scanning, scanning stops. It resumes when
you exit menu mode.
To Start or Stop a System Scan Operation
Press the preprogrammed Scan button (see
page 23) to start or stop scanning,
) to enter menu mode.
+ or ? until
6\VWHP6FDQ
) to select
6\VWHP6FDQ
You see the current scan status.
+ or ? until
6\V6FDQ2Q"
–or–
6\V6FDQ2II"
SCAN
When System Scan is Enabled
) to confirm your selection.
Note:
In conventional zones only, if there is
activity on a non-priority channel, the
radio disconnects the user from the
current conversation and automatically switches to an active priority
channel. This is indicated with a
short alert tone.
59
English
DELETING A NUISANCE CHANNEL/
TALKGROUP
Restoring a Channel/Talkgroup Back to the
Scan List
(PASSPORT GROUP SCAN OR SYSTEM
SCAN OPERATION ONLY)
To restore a previously deleted talkgroup or
channel back to the Scan list, restart the scan
operation or turn your radio off and on again.
SCAN
If a talkgroup or channel continually generates
unwanted calls (a “nuisance” channel), use the
preprogrammed Scan button to temporarily
delete the talkgroup or channel from the Scan
list.
To Temporarily Delete the Channel/
Talkgroup
While the radio’s receiving activity is on the
nuisance channel, press and hold the Scan
button until you hear a high-pitched tone (valid
key press).
Release the Scan button. The nuisance
channel has been temporarily deleted from
your Scan list.
Note:
60
English
In PassPort mode, you cannot delete
a priority channel/talkgroup (see
page 62), or the currently selected
talkgroup in a Scan list.
Note:
In PassPort mode, the talkgroup can also
be restored by scrolling through the list, or
switching the current selected talkgroup or
zone.
EDITING A SCAN LIST
(PASSPORT GROUP SCAN OR SYSTEM
SCAN OPERATION ONLY)
One Scan list is assigned to each of the 16
positions on the Zone Selector knob. Each
Scan list can contain up to 16 talkgroups and/
or channels. The same talkgroup or channel
can be included in several Scan lists, and the
same Scan list can be assigned to several
Zone Selector positions.
When you edit a Scan list, you can either add,
delete, or prioritize talkgroups or channels.
Note:
In PassPort mode, talkgroups cannot be prioritized.
Your radio cannot receive any calls while you
are editing a Scan list. The K symbol is
displayed while you are in edit mode.
Note:
In Conventional operation only, even if
there is activity on a non-priority channel,
your radio automatically switches to an
active priority channel and indicates the
activity with a short tone.
) to enter menu mode.
+ or ? until
) to select
3URJUDP/LVWV
+ or ? until
6FDQ/LVW
One Scan list per mode of operation
is available.
) to select
6FDQ/LVW
+ or ? until
$GG(QWU\"
–or until
'HOHWH(QWU\"
) to confirm your selection.
+ or ? until you see the talkgroup or
channel you want to add or delete.
Note:
3URJUDP/LVWV
SCAN
ADDING OR DELETING
TALKGROUPS OR CHANNELS IN A
SCAN LIST
Note:
You cannot delete the Primary talkgroup off a Scan List in PassPort
mode.
) to confirm your selection.
10 If you added a talkgroup or channel,
you see
–or–
(QWU\6DYHG
next page
61
English
If you delete a talkgroup or channel,
You see:
'HOHWH"
) to confirm the deletion.
You see:
SCAN
11 ( to return to
to return to
–or–
(QWU\'HOHWHG
$GG(QWU\"
'HOHWH(QWU\"
Hold down t to exit menu mode.
PRIORITIZING A TALKGROUP OR
CHANNEL IN A SCAN LIST
(SYSTEM SCAN OPERATION ONLY)
You may want to check the activity on one or
two talkgroups or channels more frequently
62
English
than others. You can do this by prioritizing
them:
Priority Channel
Scanning Sequence
None specified
Ch1➠Ch2➠Ch3➠
Ch4➠…Ch1
Channel 2
(Priority 1)
Ch2➠Ch1➠Ch2➠Ch3➠
Ch2➠Ch4➠Ch2➠…Ch1
Channel 2
(Priority 1) and
Channel 8
(Priority 2)
Ch2➠Ch1➠Ch8➠Ch3➠
Ch2➠Ch4➠Ch8➠…Ch1
Note:
In Conventional operation only, even if
there is activity on a non-priority channel,
your radio automatically switches to an
active priority channel and indicates the
activity with a short tone.
Setting Priority Talkgroups or Channels
) to enter menu mode.
+ or ? until
3URJUDP/LVWV
) to select
3URJUDP/LVWV
) to select
+ or ? until
3ULRULW\"
You see the current priority talkgroup or channel.
) to select the desired priority level.
10 + or ? until you see the talkgroup or
channel you want to prioritize.
6FDQ/LVW
6FDQ/LVW
(GLW3ULRULW\"
11 ) to prioritize that talkgroup or channel.
12 ( to return to
–or–
Hold down ( to exit menu mode.
Note:
) to select
(GLW3ULRULW\"
+ or ? until
3ULRULW\"
(GLW3ULRULW\"
SCAN
+ or ? until
–or – until
You cannot reprioritize a priority 1 talkgroup or channel to priority 2.
63
English
SCAN
Notes
64
English
PHONE
) to enter menu mode.
–or–
Press the preprogrammed Phone button, and
skip to step 5.
–or–
Press and release the Speed Dial button to
use the speed dial feature. Then press the (1
to 9) key corresponding to the number you
want to call on the Phone list. Or press 0 if you
want to call the last number dialed. Press the
PTT button. A dial tone sounds. Press the
PTT button again to send the phone number.
–or–
For an LTR trunked system, press and hold
the PTT button while dialing a number. (If your
radio has been programmed for Hot keypad,
this is a radio-wide setting).
+ or ? until
3KRQH
) to confirm
3KRQH
Your radio allows you to place and receive
telephone calls through trunked and
conventional systems (depending on phone line
availability). Telephone calls through a repeater
allow only one person to speak at a time.
MAKING A PHONE CALL D
THROUGH A TRUNKED SYSTEM
Note:
The following instructions assume your
radio has been programmed as follows by
your dealer using CPS (Customer Programming Software).
•
Dial type: Live
•
Access/Deaccess type: Immediate Auto
•
Tone Span: Timed - 100 ms tone duration
Do the following:
Select a trunked zone and talkgroup that have
been programmed for telephone.
PHONE
To Initiate a Phone Call
D appears on the display when you are in
Phone mode.
65
English
5
Press and Release the PTT button.
•
If phone access is successful, a dial tone
sounds.
•
If phone access is unsuccessful, a lowpitched alternating tone sounds. Disconnect the call (see step 8) and try again.
Enter the phone number with the keypad. The
number is automatically sent without pressing
the PTT button again.
–or–
+ or ? to
select a number from
the phone list.
;;;-;;;-;;;;
Press and release the PTT button again to
send the number.
PHONE
66
English
Hold the radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth. Press the PTT button to talk;
release it to listen.
To disconnect the phone call:
Press and hold ( to exit Phone.
D no longer appears on the display.
MAKING A PHONE CALL D
THROUGH A CONVENTIONAL
SYSTEM
To Initiate a Phone Call
Press the preprogrammed Phone button, and
skip to step 5.
–or–
Press the PTT button, and if the Hot keypad
feature has been programmed by your dealer,
do the following:
Select a conventional zone and channel that
have been programmed for telephone.
) to enter menu mode.
+ or ? until
3KRQH
) to select
3KRQH
D appears on the display when you are in
Phone Mode.
5
(For conventional operation with auto access
only). You hear a series of tones, indicating
that an access code is being sent automatically, and see your access code:
–or–
Enter your access code using the keypad.
Press the key (1 to 9) corresponding to the
number you want to call, or press 0 if you
want to call the last number dialed.
;;;-;;;-;;;;
To redial the last number dialed (if
not using Speed Dial), press and
release the PTT button immediately
after the access code is sent. The
radio sends the last number dialed.
;;;-;;;-;;;;
–or–
If you entered your access code
using the keypad, press the ? key
once to access the last number
dialed; then press and release the
PTT button.
–or–
+ or ? to select
a number from the
phone list.
–or– (see step 7)
Press and release the preprogrammed
Speed Dial button (see step 6) to use the
Speed Dial feature.
Note:
When you hear a dial tone:
Enter the phone number using the keypad.
Press and release the PTT button, if required
for your radio.
Hold the radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth. Press the PTT button to talk;
release it to listen.
PHONE
67
English
10 To disconnect a phone call, do one of the
following:
Enter the deaccess code using the keypad.
–or–
If your radio has the deaccess code
programmed, go to step 9.
RECEIVING A PHONE CALL D
THROUGH A TRUNKED OR
CONVENTIONAL SYSTEM
To Receive a Phone Call
11 To exit Phone Mode:
+ or ? to select an LTR trunked talkgroup or conventional channel that has been
programmed for telephone.
–or–
Press and hold # to disconnect the call.
D disappears from the display.
Activate any scan type containing a telephone
talkgroup or channel (see page 57).
Note:
•
When a phone call is received, a ringing
tone sounds, alerting you to answer the
phone call.
PHONE
Note:
68
English
No PassPort talkgroup or zone
selection is needed in PassPort
mode.
The D also appears on the display in
PassPort mode.
Press the PTT button to answer the phone
call. Press the PTT button to talk; release it to
listen.
3
To disconnect the phone call and exit Phone
and menu mode:
Press and hold to disconnect the call.
Note:
D no longer appears on the display
in PassPort mode.
MODIFYING THE PHONE LIST K
Your radio contains a Phone list that holds up
to 25 phone numbers. The Phone list is shared
between trunked and conventional Phone
operation. You can modify the Phone list in
three ways through your radio’s menu:
•
Add an entry
•
Delete an entry
•
Edit an existing entry
+ or ? until
3URJUDP/LVWV
) to select
3URJUDP/LVWV
+ or ? until
3KRQH/LVW
) to select
3KRQH/LVW
+ or ? until
$GG(QWU\"
) to select
$GG(QWU\"
You see:
(QWHU1DPH
Use the keypad to enter the name (see page
19 and page 20).
To Add an Entry
) to store the name.
) to enter menu mode.
You see:
PHONE
The K symbol appears on the display when
you are modifying the phone list.
(QWHU3KRQH
69
English
3
) to select
3URJUDP/LVWV
+ or ? until
3KRQH/LVW
12 + or ? until you see the location in the
list where you want to store the phone number.
) to select
3KRQH/LVW
13 ) to store the phone number.
+ or ? until
'HOHWH(QWU\"
) to select
'HOHWH(QWU\"
+ or ? until you see the entry you want
to delete.
) to select the entry.
10 Use the keypad to enter the phone number. You
can also add a dash (press >) and a Pause
Indicator (hold down # until the # character on
the display changes to a “P”).
11 ) to store the phone number.
You see:
14 ) to return to
(QWU\6DYHG
$GG(QWU\"
Hold down ( to exit menu mode.
PHONE
To Delete an Entry
) to enter menu mode.
+ or ? until
70
English
3URJUDP/LVWV
10 You see:
'HOHWH"
) again to confirm the deletion.
You see:
11 ( to return to
(QWU\'HOHWHG
+ or ? until
(GLW(QWU\"
'HOHWH(QWU\"
) to select
(GLW(QWU\"
+ or ? until you see the entry you want
to edit.
) to select the entry.
–or–
Hold down ( to exit menu mode.
To Edit an Entry
) to enter menu mode.
+ or ? until
3URJUDP/LVWV
(to edit the name),
) to select
3URJUDP/LVWV
(to edit the phone
number),
+ or ? until
3KRQH/LVW
10 + or ? until
–or– until
–or– until
(GLW1DPH"
(GLW1XPEHU"
(GLW/RFDWLRQ"
PHONE
(to edit the location in the phone list).
) to select
3KRQH/LVW
11 ) to confirm your selection.
71
English
12 Use the keypad to edit the entry (see page
21),
–or–
+ or ? until you see the location where
you want to store the phone number.
13 ) to store the information.
14 ( to return to
(GLW(QWU\"
–or–
PHONE
Hold down ( to exit menu mode.
72
English
The HT1250•LS+ radio’s voice storage feature
enables your radio to perform seven types of
voice related functions:
•
Incoming Call Recording
•
Voice Memo Recording
•
Recorded Message Playback
•
Recorded Message Delete
•
Recorded Message Transmission
•
Automatic Message Reply (“When
Available”)
•
Message Time Stamping
There is a total of 120 seconds recording time
available for all voice storage activity. Your
dealer can divide the 120 seconds into a
defined number of equal length time slots. The
following table summarizes the slot length
options available with the HT1250•LS+ radio:
Number of Equal
Length Slots
Slot Length
(Seconds)
120
60
24
10
12
20
VOICE STORAGE
VOICE STORAGE
When recording calls, keep in mind these
time slot guidelines:
•
As a time slot becomes close to full, you
see a timer count down the final 5
seconds.
When a time slot is completely full, an
alert tone sounds
The display shows:
Recording stops.
•
0VJ6ORW)XOO
When all message slots have at least one
message stored, an alert tone sounds.
73
English
VOICE STORAGE
If a voice storage
record function is
requested, the display shows:
The radio records the call until the message
slot is full or until you release the preprogrammed Record/Playback button.
Release the Record/Playback button to stop
recording.
INCOMING CALL RECORDING
The HT1250•LS+ radio allows you to record
incoming calls in either of two ways:
•
Selective Incoming Call Recording
All Incoming Call Recording
•
All Incoming Call Recording
This feature enables you to automatically
record all incoming trunked and conventional
dispatch calls, trunked and conventional
telephone interconnect calls, and MDC
selective calls.
Note:
Only the audio transmissions of your caller
is recorded.
Selective Incoming Call Recording
This feature enables you to record incoming
calls selectively, or on a call-by-call basis.
To Selectively Record an Incoming Call:
Press and hold the preprogrammed Record/
Playback button (see page 22) while receiving
the call.
The display shows
74
English
A confirmation tone sounds, indicating that
the radio begins recording.
0HPRU\)XOO
5HFRUGLQJ
This feature is useful when you need to keep
informed of channel activity while away from
your radio.
Note:
This feature does not work while in scan
mode.
To Record All Incoming Calls
) to enter menu mode.
+ or ? until
9RLFH6WRUDJH
) to select
9RLFH6WRUDJH
+ or ? until
5HFRUG
) to select
5HFRUG
+ or ? until
$OO,QFRPLQJ
) to select
$OO,QFRPLQJ
10 Press ( to stop recording.
–or–
Go to step 1 again to continue recording
in the next available slot.
Note: Five seconds
7LPH/HIW;;
before the message
slot ends, the radio display shows
(where XX = remaining seconds).
The “voice storage full” alert sounds when the
message slot is full, and recording stops.
The display shows:
The display continuously flashes, except
while a call is being recorded.
VOICE STORAGE
9 The display shows
5HFRUGLQJ
while your radio is
recording.
The radio also records the time stamp
and the channel alias to the message
slot.
0VJ6ORW)XOO
$OO,QFRPLQJ
75
English
VOICE STORAGE
VOICE MEMO RECORDING
In addition to recording calls received, the
HT1250•LS+ radio offers you the ability to
record voice memos (or personal reminders)
into the radio. The voice memo recording
feature is useful for quickly saving phone
numbers, names, or any other brief voice
information. You can record voice memos using
the preprogrammed Record/Playback button
(see page 22) or your radio’s menu.
Without pressing the PTT button, speak
clearly into the microphone to record your
memo. The radio records your memo until the
message slot is full or until you release the
preprogrammed Record/Playback button.
Release the Record/Playback button to stop
recording.
To Record a Voice Memo using the Menu
Important Note:
To record properly, incoming calls cannot be
received while a voice memo is being recorded.
) to enter menu mode.
+ or ? until
9RLFH6WRUDJH
To Record a Voice Memo using the
Preprogrammed Record/Playback Button
) to select
9RLFH6WRUDJH
+ or ? until
5HFRUG
) to select
5HFRUG
+ or ? until
9RLFH0HPR
76
English
Press and hold the preprogrammed Record/
Playback button.
5HFRUGLQJ
•
The display shows:
•
A confirmation tone sounds, indicating that
the radio begins recording.
The display shows:
Note:
) to select
5HFRUGLQJ
Without pressing the PTT button, speak
clearly into the microphone to record your
memo. The radio records your memo until the
message slot is full or until you press (.
Note: To stop recording at any time, press
(.
3OD\LQJ0VJ;;;
To Play Back a Message using the
Preprogrammed Record/Playback Button
Press ( to stop recording.
–or–
Press and release the preprogrammed
Record/Playback button.
• The first message
plays, and the display shows (XXX
= the message
number)
Repeat steps 7 and 8 to store additional
messages.
RECORDED MESSAGE PLAYBACK
The HT1250•LS+ allows you to list, select, and
Playback previously recorded incoming call or
voice memo messages. You can play back a
message by using the preprogrammed
Record/Playback button (see page 22) or your
radio’s menu.
Recorded message Playback cannot be
initiated while your radio is receiving. Also,
you don’t receive any incoming calls while
you play back messages.
VOICE STORAGE
3OD\LQJ0VJ;;;
To advance to the next message at any time
during Play back, press and release the
Record/Playback button again.
To exit/cancel Play Back mode:
Press and release the preprogrammed
Playback Exit button (see page 22).
–or–
Press ( to stop Play Back.
77
English
VOICE STORAGE
To Playback a Message using the Menu
) to enter menu mode.
+ or ? until
9RLFH6WRUDJH
) to select
9RLFH6WRUDJH
+ or ? until
3OD\EDFN
) to select
3OD\EDFN
+ or ? until
$
) to select
$
Message #
Time Stamp
Duration (in seconds)
+ or ? to select the desired message.
Press ) to play the selected message.
10 + or ? anytime during playback to
advance to the next message.
78
English
RECORDED MESSAGE DELETE
The HT1250•LS+ radio allows you to delete
previously recorded incoming call or voice
memo messages. You can delete a message
using either the preprogrammed Delete
Playback button (see page 22) or your radio’s
menu.
Note:
Messages must be deleted one at a time.
To Delete a Message using the
Preprogrammed Delete Playback Button
(see page 22)
Press and release the preprogrammed
Record/Playback button.
+ or ? to select the desired message.
Press and hold the preprogrammed Delete
Playback button to delete current message.
( to stop deleting messages.
To Delete a Message using the Menu
) to enter menu mode.
+ or ? until
9RLFH6WRUDJH
This feature allows you to transmit a recorded
message to another radio user.
To Transmit a Recorded Message:
) to select
9RLFH6WRUDJH
Press and hold the PTT button to initiate the
message transmission.
+ or ? until
'HOHWH
) to select
'HOHWH
While holding down the PTT button, press the
preprogrammed Record/Playback button to
select and play back the desired recorded call
or memo.
+ or ? to select the desired message.
When finished transmitting your message,
press the Record/Playback button again to
stop transmitting.
Press ) to delete the selected message.
+ or ? to select the another message
to be deleted, then go to step 7.
VOICE STORAGE
RECORDED MESSAGE
TRANSMISSION
–or–
Press ( to stop deleting messages.
79
English
VOICE STORAGE
AUTOMATIC MESSAGE REPLY:
“WHEN AVAILABLE”
(LTR TRUNKED OPERATION ONLY)
The automatic Message Reply feature allows
you to transmit a recorded message to a caller
when your radio receives an MDC selective
call.
) to select
To Record a Message
+ or ? until
5HFRUGHG0VJ
) to select
5HFRUGHG0VJ
Note: The display
shows
5HFRUGLQJ
To Enable the Automatic Message Reply
Feature
) to enter menu mode.
+ or ? until
) to select
8WLOLWLHV
+ or ? until
:KHQ$YDLODEOH
) to select
:KHQ$YDLODEOH
80
English
8WLOLWLHV
+ or ? until
$XWR5HSO\2Q"
Without pressing the PTT button, speak
clearly into the microphone to record your
memo. The radio records your memo until the
message slot is full or until you press (.
The display shows:
0VJ6ORW)XOO
To exit or cancel recording, press (.
With this feature enabled, the recorded
message is automatically transmitted whenever your radio receives an individual call.
1
) to enter menu mode.
+ or ? until
8WLOLWLHV
) to select
8WLOLWLHV
+ or ? until
) to select
:KHQ$YDLODEOH
+ or ? until
$XWR5HSO\2II"
) to select
VOICE STORAGE
To Disable the Automatic Message Reply
Feature
:KHQ$YDLODEOH
81
English
VOICE STORAGE
Notes
82
English
AUDIO/TONE SETTINGS
You can customize the audio and tone feature
settings on your radio by
) to enter menu mode.
+ or ? until
$XGLR7RQHV
) to select
$XGLR7RQHV
+ or ? until you see the feature you
want to change (see the table on the next
page).
) to select the feature. You see the feature’s current setting.
+ or ? for available settings. (For
Name and Call Tone Tagging, see page 51.)
) to set the desired setting.
AUDIO/TONE
SETTINGS
83
English
Audio/Tone Settings
AUDIO/TONE
SETTINGS
Feature
What it Does
$OHUW9RO/YO
Makes the volume level of the audio and alert tones independent. If turned on, it makes the alert tones follow the
settings in the CPS; if turned off, the alert tones follow the
setting of the volume knob.
,QG$OHUW2II
,QG$OHUW2Q
7RQH'LVDEOH
Turns all alert and audio tones on or off.
7RQHV2Q
7RQHV2II
1DPHDQG&DOO
7RQH7DJJLQJ
/757UXQNHG
2SHUDWLRQ2QO\ 
Assigns a specific ring tone when receiving a call from a
specific user (see page 51 for details).
6WDQGDUG
$OHUW – 
&DOO7RQH7DJ‡
Assigns a specific tone when receiving a specific type of
radio call (see page 51 for details).
6WDQGDUG
$OHUW – 
(VFDOHUW ‡
Increases the volume of the alarm tones when a radio
call is not answered.
(VFDOHUW2Q
(VFDOHUW2II
&RPSDQGLQJ
Provides the same audio quality for 12.5 kHz and for
25 kHz channels.
&RPSDQG2Q
&RPSDQG2II
.H\SDG7RQHV
Turns keypad tones on or off except for programmable
buttons (see page 22).
7RQHV2Q
7RQHV2II
‡
‡ LTR trunking operation only.
84
English
Settings
UTILITIES
You can customize some of your radio’s feature
by:
) to enter menu mode.
+ or ? until
) to select
+ or ? until you see the feature you
want to change (see table on the next page).
) to select the feature. You see the feature’s current setting.
+ or ? for available settings.
) to select the desired setting.
8WLOLWLHV
8WLOLWLHV
UTILITIES
85
English
Utilities Features
UTILITIES
Feature
What it Does
6TXHOFK §
Sets radio squelch at either normal or tight (see page
88).
6TOFK7LJKW
6TOFK1RUPDO
3RZHU/HYHO
Changes the power level of the radio to high, low, or auto
(see page 88).
3RZHU+LJK
3RZHU/RZ
3RZHU$XWR
&ORFN
Sets the time, or turns the clock on or off (see page 90).
&ORFN2Q
&ORFN2II
6HW7LPH
5HPLQGHU$ODUP
Sets the alarm, or turns it on or off (see page 90).
$ODUP2Q
$ODUP2II
6HW7LPH
/DQJXDJH
6HOHFWLRQ
Selects the language to be shown in your radio’s displays.
(QJOLVK
6SDQLVK
3RUWXJXHVH
)UHQFK
/LJKW'LVDEOH
Turns your radio’s LED indicator, the display, and keypad
backlight on or off.
/LJKWVRQ
/LJKWVRII
§ Conventional Operation only.
86
English
Settings
Utilities Features (continued)
Feature
What it Does
:KHQ$YDLODEOH‡
Transmits a recorded message to a caller when your
radio receives an MDC Selective call.
6RIWZDUH9HU
Displays the radio’s software version number when you
press ).
Settings
$XWRUHSO\RQ
$XWRUHSO\RII
5HFRUGPVJ
5HYLHZPVJ
——
Note: The LTR and conventional software version number may
be different than the PassPort software version number.
‡ LTR trunking operation only.
UTILITIES
87
English
SETTING TIGHT OR NORMAL SQUELCH
+ or ? until
6TXHOFK
) to select
6TXHOFK
+ or ? until
6TOFK7LJKW"
–or–
until
6TOFK1RUPDO"
(CONVENTIONAL OPERATION ONLY)
Use this feature to filter out nuisance
(unwanted) calls and/or background noise.
However, tightening squelch could cause calls
from remote locations to be filtered out as well.
In this case, normal squelch may be more
desired.
To Select Tight or Normal Squelch
Press the preprogrammed Squelch button
(see page 25) to toggle between tight and
normal squelch,
–or–
UTILITIES
Do the following:
88
English
) to enter menu mode.
+ or ? until
8WLOLWLHV
) to select
8WLOLWLHV
) to confirm the selection.
SETTING THE POWER LEVEL B
To Set the Power Level
Each channel in your radio has a predefined
transmit power level that can be changed.
Press the preprogrammed Power Level button
(see page 24) to toggle between low and high,
•
High power (S) allows you to reach a radio
that is farther away.
•
Low power (R) conserves the battery’s
charge.
•
Auto power (conventional operation only)
automatically sets the optimal power level
based on the strength of the signal
received. If the received signal is weak, the
transmit level will be set to high, and viceversa.
–or–
Do the following:
) to enter menu mode.
+ or ? until
8WLOLWLHV
) to select
8WLOLWLHV
+ or ? until
3RZHU/HYHO
) to select
3RZHU/HYHO
Note:
The display shows the current power level.
•
In PassPort mode, the power level is predefined radio wide.
+ or ? until
3RZHU+LJK"
–or–
until
3RZHU/RZ"
–or–
until
3RZHU$XWR"
UTILITIES
•
Be aware that a message received from a
nearby radio might change your radio’s
power level to low. This may cause radios
that are farther away not to receive your
transmissions.
) to confirm the selection.
89
English
SETTING THE CLOCK/ALARM
To Set the Clock/Alarm
) to enter menu mode.
+ or ? until
When a setting is blinking, you can change it
with + or ?.
Hour (AM or
PM)
Minutes
8WLOLWLHV
Note:
) to select
+ or ? until
&ORFN
–or– until
5HPLQGHU$ODUP
5HPLQGHU$ODUP
< or > to move to the previous or next
setting.
10 ) to save your changes.
UTILITIES
11 ( to return to
) to confirm your selection.
+ or ? until
6HW7LPH"
8WLOLWLHV
–or– to return to
5HPLQGHU$ODUP
–or–
&ORFN
–or–
Hold down ( to exit menu mode.
90
English
) to select
6HW7LPH"
(AM/PM or 24 hr)
You cannot select “24 hr” for
8WLOLWLHV
30
WARRANTY
I.
WHAT THIS WARRANTY COVERS AND
FOR HOW LONG:
MOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA manufactured Communication Products listed below
(“Product”) against defects in material and
workmanship under normal use and service for a period of time from the date of
purchase as scheduled below:
HT1250•LS+ Portable
Units
Two (2) Years
Product Accessories
One (1) Year
Motorola, at its option, will at no charge
either repair the Product (with new or
reconditioned parts), replace it (with a new
WARRANTY
LIMITED WARRANTY
MOTOROLA COMMUNICATION
PRODUCTS
or reconditioned Product), or refund the
purchase price of the Product during the
warranty period provided it is returned in
accordance with the terms of this warranty.
Replaced parts or boards are warranted
for the balance of the original applicable
warranty period. All replaced parts of Product shall become the property of MOTOROLA.
This express limited warranty is extended
by MOTOROLA to the original end user
purchaser only and is not assignable or
transferable to any other party. This is the
complete warranty for the Product
manufactured by MOTOROLA.
MOTOROLA assumes no obligations or
liability for additions or modifications to this
warranty unless made in writing and
signed by an officer of MOTOROLA.
Unless made in a separate agreement
between MOTOROLA and the original end
user purchaser, MOTOROLA does not
warrant the installation, maintenance or
service of the Product.
MOTOROLA cannot be responsible in any
way for any ancillary equipment not
91
English
WARRANTY
furnished by MOTOROLA which is
attached to or used in connection with the
Product, or for operation of the Product
with any ancillary equipment, and all such
equipment is expressly excluded from this
warranty. Because each system which may
use the Product is unique, MOTOROLA
disclaims liability for range, coverage, or
operation of the system as a whole under
this warranty.
MOTOROLA BE LIABLE FOR DAMAGES
IN EXCESS OF THE PURCHASE PRICE
OF THE PRODUCT, FOR ANY LOSS OF
USE, LOSS OF TIME, INCONVENIENCE,
COMMERCIAL LOSS, LOST PROFITS
OR SAVINGS OR OTHER INCIDENTAL,
SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE SUCH PRODUCT,
TO THE FULL EXTENT SUCH MAY BE
DISCLAIMED BY LAW.
II. GENERAL PROVISIONS:
III. STATE LAW RIGHTS:
This warranty sets forth the full extent of
MOTOROLA’S responsibilities regarding
the Product. Repair, replacement or refund
of the purchase price, at MOTOROLA’s
option, is the exclusive remedy. THIS
WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES.
IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE
DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL
92
English
SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LIMITATION ON HOW
LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATION OR
EXCLUSIONS MAY NOT APPLY.
This warranty gives specific legal rights,
and there may be other rights which may
vary from state to state.
IV. HOW TO GET WARRANTY SERVICE:
V. WHAT THIS WARRANTY DOES NOT
COVER:
A)
Defects or damage resulting from use of the
Product in other than its normal and
customary manner.
B) Defects or damage from misuse, accident,
water, or neglect.
C) Defects or damage from improper testing,
WARRANTY
You must provide proof of purchase
(bearing the date of purchase and Product
item serial number) in order to receive
warranty service and, also, deliver or send
the Product item, transportation and
insurance prepaid, to an authorized
warranty service location. Warranty
service will be provided by Motorola
through one of its authorized warranty
service locations. If you first contact the
company which sold you the Product (e.g.,
dealer or communication service provider),
it can facilitate your obtaining warranty
service. You can also call Motorola at 1800-927-2744 US/Canada.
operation, maintenance, installation,
alteration, modification, or adjustment.
D) Breakage or damage to antennas unless
caused directly by defects in material
workmanship.
E) A Product subjected to unauthorized
Product modifications, disassemblies or
repairs (including, without limitation, the
addition to the Product of non-Motorola
supplied equipment) which adversely affect
performance of the Product or interfere with
Motorola’s normal warranty inspection and
testing of the Product to verify any warranty
claim.
F) Product which has had the serial number
removed or made illegible.
G) Rechargeable batteries if:
1) any of the seals on the battery
enclosure of cells are broken or show
evidence of tampering.
2) the damage or defect is caused by
charging or using the battery in
equipment or service other than the
Product for which it is specified.
H) Freight costs to the repair depot.
I) A Product which, due to illegal or
unauthorized alteration of the software/
firmware in the Product, does not function in
accordance with MOTOROLA’s published
93
English
WARRANTY
J)
K)
specifications or the FCC type acceptance
labeling in effect for the Product at the time
the Product was initially distributed from
MOTOROLA.
Scratches or other cosmetic damage to
Product surfaces that does not affect the
operation of the Product.
Normal and customary wear and tear.
VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to
the extent that it is based on a claim that the
Product or parts infringe a United States patent,
and MOTOROLA will pay those costs and
damages finally awarded against the end user
purchaser in any such suit which are attributable
to any such claim, but such defense and
payments are conditioned on the following:
A) that MOTOROLA will be notified promptly in
writing by such purchaser of any notice of
such claim;
B) that MOTOROLA will have sole control of the
defense of such suit and all negotiations for
its settlement or compromise; and
C) should the Product or parts become, or in
MOTOROLA’s opinion be likely to become,
the subject of a claim of infringement of a
94
English
United States patent, that such purchaser
will permit MOTOROLA, at its option and
expense, either to procure for such
purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product
or parts as depreciated and accept its
return. The depreciation will be an equal
amount per year over the lifetime of the
Product or parts as established by
MOTOROLA.
MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or used in
connection with the Product. The foregoing
states the entire liability of MOTOROLA with
respect to infringement of patents by the Product
or any parts thereof.
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software such as
the exclusive rights to reproduce in copies and
WARRANTY
distribute copies of such Motorola software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product
may not be replaced, copied, distributed,
modified in any way, or used to produce any
derivative thereof. No other use including, without
limitation, alteration, modification, reproduction,
distribution, or reverse engineering of such
MOTOROLA software or exercise of rights in
such MOTOROLA software is permitted. No
license is granted by implication, estoppel or
otherwise under MOTOROLA patent rights or
copyrights.
VII. GOVERNING LAW:
This Warranty is governed by the laws of the
State of Illinois, USA.
95
English
WARRANTY
Notes
96
English
M./
ACCESSORIES
Motorola offers a number of accessories to
enhance the productivity of your two-way radio.
Many of the available accessories are listed
below. For a complete list, see your Motorola
dealer.
CHARGERS
AAHTN3000_
120 Volt, Rapid Rate, Single-Unit IntelliCharger
120Volt, 6-Unit, Rapi-Rate IntelliCharger
NLN7967
Wall Mount Kit for Multi-Unit Charger
RLN4883
Travel Charger (includes voltage regulated lighter adapter, custom charger
bse, coil cord, and mounting bracket)
RL-76345
Battery Optimizing System (BOS)
Adapter Plate
CARRY CASES
HLN9714_
Spring 2 1/2” Belt Clip
HLN9677_
Leather DTMF Case, Thin Battery with Belt
Loop
WPLN4071_R
Battery Optimizing System - 110 Volt
AC, 50/60 Hz, 4 Station
HLN9689_
Leather DTMF Case, Standard Battery with
Belt loop
WPLN4079-R
Battery Maintenance System Plus
(BMS Plus) - 110 Volt AC, 50/60 Hz
HLN9690_
Leather DTMF Case, Thin Battery with
Swivel
HLN9694_
Leather DTMF Case, Standard Battery with
Swivel
HLN9745_
Soft-Leather Case, Tall, DTMF, Belt Loop,
Standard Battery
HLN9946
Leather Keypad Case with Belt Loop
HLN9998
Leather Keypad Case with Swivel
HLN9945
Leather Keypad Case with Belt Loop
HLN9955
Leather Keypad Case with Swivel
ACCESSORIES
AAHTN3003_
97
English
WPPN4079-R
BMS Battery Adapter (For Ni-Cad and
NiMH Batteries)
WPLN4107-R
Motorola Conditioning Charger Kit
(includes 7.2 Volt base, removable
adapter plate and transformer, 60
minute Rapid Charger, 110V)
ACCESSORIES
WPPN4065-R
Medium Weight Over-the-Head Dual
Muff Headset with Noise Cancelling
Microphone and in line PTT. FM
Approved
AARMN4032
Medium Weight Over-the-Head Dual
Muff Headset with Noise Canceling
Microphone - FM Approved
ARMN4020
Heavy Duty Muff Headset with Noise
Cancelling Microphone and PTT on
Earcup, Noise Reduction Rating = 24 dB
- FM Approved (VOX operational only on
conventional channel)
RMN4051
2-Way Hard-hat Mount Headset, Black Noise Reduction Rating = 22 dB
(required RKN4097)
RMN4052
Lightweight Headset with Boom
Microphone and In-Line PTT - FM
(Factory Mutual) Approved
Tactical HeadBand-Style Headset, Gray Noise Reduction Rating = 24 dB
(requires RKN4097)
RMN4053
Lightweight Headset with Swivel Boom
Microphone - (FM Approved (VOX operational only on conventional channel)
Tactical Hard-hat Mount Headset, Gray Noise Reduction Rating = 22 dB
(requires RKN4097)
RMN4054
Ultra-Light Headset - FM Approved (VOX
operational only on
conventional channel)
Receive-Only Hard-hat Mount Headset
with 3.5mm right angle plug - Noise
Reduction Rating = 22 dB
RMN4055
Receive-Only headBand-Style Headset
with 3.5mm right angle plug - Noise
Reduction Rating = 24 dB
Motorola Conditioning Charger. FourStation Base only. 110V (requires
Adapter Plate)
WPPN4082-R
Adapter Plate Only (for Motorola
Conditioning Charger)
RLN4814
Vehicular Mounting Bracket (for use
with Motorola Single Unit Conditioning Charger Bases)
HEADSETS AND ACCESSORIES
AARMN4018
AARMN4031
AARMN4017
98
English
AARMN4019
RKN4097
AARMN4021
In-Line Adapter Cable for user with
RMN4051. RMN4052, and RMN4053
Headsets
EAR MICROPHONE SYSTEM
BDN6677
Ear Microphone - Black (for noise levels
up to 95 dB) - requires Interface Module
BDN6678
AARMN4022
2 Wire Ear Piece with Microphone and
PTT (Beige) - FM Approved
Ear Microphone - Beige (for noise levels
up to 95 dB) - requires Interface Module
BDN6641
AARMN4028
Ear Piece without Volume Control (Black)
- FM Approved
Ear Microphone - Gray (for high noise
levels from 95 dB to 105 dB) - requires
Interface Module - FM Approved
AARMN4029
2 Wire Ear Piece with Microphone and
PTT (Black) - FM Approved
AARMN4044
Interface Module for PTT Operation Only
- FM Approved
0180358B38
Finger Push to Talk Switch for Ear Microphone System - FM Approved
0180300E83
Body Switch Push to Talk for Ear Microphone System
MICROPHONES
AAHMN9052_ Standard Remote Speaker Microphone
AAHMN9053_ Noise-Cancelling Remote Speaker
Microphone - FM Approved
AAHMN9054_ Public Safety Remote Speaker
Microphone - FM Approved
AAHKN9055
ACCESSORIES
Ear Piece without Volume Control
(Beige) - FM Approved
Remote Speaker Microphone
Replacement Cable
99
English
INTEGRATED MICROPHONE/
RECEIVER
This devices’s acoustic technology does not
rely on conduction for communication.
ACCESSORIES
NTN1722
NKN6508
Replacement Cable for NTN1722
NTN1723
Integrated Ear Microphone/Receiver
System wit Palm PTT - FM Approved
AARLN4885
Receive Only Foam Earbud with 3.5mm
plug - (for use with AAHMN9053,
AAHMN8054, and AAHMN9057) - FM
Approved
RLN4941
Receive-Only Earpiece with translucent
tube, rubber eartip, and 3.5mm plug (for
use with AAHMN9053, AAHMN9054, and
AAHMN9057)
RLN4922
Completely Discrete Earpiece Kit - must
be used with any standard 2 or 3 wire surveillance earpiece kit
NTN8370
Extreme Noise Earpiece Adapter Kit,
Noise Reduction Rating - 28 dB (for use
with AARMN4022 and AARMN4029)
NTN8371
Low Noise Earpiece Adapter Kit (for use
with AARMN4022 and AARMN4029)
NKN6510
Replacement Cable for NTN1723
NTN1724
Integrated Ear Microphone/Receiver
System with Ring PTT - FM Approved
NTN8821
CommPort Maintenance Kit - includes
Replacement Ear Tubes (qty 10).
Windscreens (qty 2) and Microphone Seal
Strips (qty 10)
RLN4760
NTN8986
Adhesive Pads (qty 90) for secure
attachment to the ear
Small Custom Earpiece, Right Ear (for
use with NTN8370 or NTN8371)
RLN4761
NTN8988
Ear Straps (qty 10) for secure attachment
to the ear
Medium Custom Earpiece, Right Ear (for
use with NTN8370 or NTN8371)
RLN4762
Large Custom Earpiece, Right Ear (for
use with NTN8370 or NTN8371)
RLN4763
Small Custom Earpiece, Left Ear (for use
with NTN8370 or NTN8371)
RLN4764
Medium Custom Earpiece, Left Ear (for
user with NTN8370 or NTN8371)
100
English
Integrated Ear Microphone/Receiver
System with PTT on Radio Adapter - FM
Approved
EARPIECE
AARLN4885
RLN4765
Receive Only Foam Earbud with 3.5mm
plug - (for use with AAHMN9053,
AAHMN8054, and AAHMN9057) - FM
Approved
Large Custom Earpiece, Left Ear (for use
with NTN8370 or NTN8371)
ADAPTERS
Accessory Dust Cover
HLN 9793
Charger Insert Spacer - Compatible with
“A” versions chargers ONLY
HLN9794
Charger Insert Spacer - Compatible with
“B” versions chargers ONLY
AAHLN9716
Audio Accessory Adapter for the user of
GP300/P1225•LS audio accessories - FM
Approved (not compatible with BDN6706
or BDN6646)
HNN9008_R
1200 mAH NiMH High Capacity Battery
(standard)
HNN9009_R
1900 mAH NiMH Ultra High Capacity
Battery
HNN9010_R
1850 mAH NiMH, Ultra High Capacity FM Approved
HNN9011_R
1200 mAH Ni-Cad, High Capacity Battery - FM Approved
HNN9012_R
1350 mAH Ni-Cad High Capacity Battery
HNN9013_R
1200 mAH Lithium Ion Battery
ACCESSORIES
HLN9820
BATTERIES
ANTENNAS
HKAD4000_
220 MHz, Helical
NAF5083
700 MHz 1/2-Wave, Whip
MANUALS
6864110R12
HT1250•LS+ Service Manual
101
English
ACCESSORIES
Notes
102
English
Selecting a Trunked Zone and Talkgroup
1. Turn Zone Selector knob to appropriate trunked zone.
Sending a Trunked Call
1. Press PTT. If trunked system access was successful — LED = steady red;
if unsuccessful — LED = flashing red; low pitched tone sounds.
2. Speak clearly into microphone. Release PTT to listen.
Initial PassPort System Registration
3$663257
Upon power up, PassPort alias appears on the display.
<2857/.*53$/,$6
The selected talkgroup alias appears on the display.
6($5&+,1*
5(*6,7(;;;
7/.*53$/,$6
May appear if a PassPort site cannot be quickly
located.
HT1250•LS+™ Radio Quick Reference Card
Record the functions for your radio’s programmable buttons in the table provided below. For further
information, see pages 22 and 24 in this User’s Guide.
Zone Selector Knob
Top Button (D)
(programmable)
On/Off Volume Knob
LED Indicator
Side Button 1 (A)
Appears indicating successful PassPort registration
(XXX = PassPort site on which you are registered).
(programmable)
Microphone
Selected talkgroup alias appears and remains on the
display upon successful registration.
Selecting a Conventional Zone and Channel
1.
Turn Zone Selector knob to appropriate conventional zone.
Sending a Conventional Call
1.
Press PTT and speak clearly into microphone. LED = steady red while call is being sent.
Release PTT to listen.
Receiving a Trunked or Conventional Call
1.
Turn Zone Selector knob to desired trunked or conventional zone. Make sure PTT is
released. When a call is received, the LED flashes red.
Making a Selective Call (Trunked Operation Only)
1.
From Selective Call menu, select or enter desired radio ID number.
2.
Press PTT to send the call. The radio sounds a continuous tone. Press PTT and talk;
release PTT to listen.
Receiving a Selective Call (Trunked Operation Only)
•
When a Selective Call is received, the radio displays F symbol and name or ID of calling
radio; the LED flashes yellow. Press PTT to answer.
Push-to-Talk
Button
Display
Menu Keys
(P1, P2, P3)
(programmable)
Side Button 2 (B)
(programmable)
Keypad
Side Button 3 (C)
(programmable)
Button
Function
Short Press
Long Press
Hold Down
Page
Menu Navigation Chart
* — Available in PassPort trunked zones only
(Refer to Menu Navigation guidelines—
lower, left-hand corner of this page)
(LTR) Radio
Call‡
Rptr/
Talkarnd§
(p. 38)
(LTR)All
Group
Scan‡(p. 58)
on/off
repeater mode/
talkarnd mode
PP Group
Scan*
(p. 56)
‡ — Available in LTR trunked zones only
Voice
Storage
§ — Available in conventional zones only
LTR /Con
System
Scan
Program
Lists
Call Alert
Radio
Check
select/enter
ID
select/enter
ID
select/enter
ID
Record
(p. 74)
Playback
(p. 77)
all incoming
Menu Navigation
Squelch§
on/off
normal/
tight
Tone
Disable
Power Level
add/delete/
edit entry
on/off
high/low/
auto (‡ and §)
Scan List
Name
Tone Tag§
Clock
standard/alert
#1 - #7
on/off/set time
Reminder
Alarm
(p. 60)
LTR Call ‡
Tone Tag
edit entry
add/delete
entry
) to enter menu mode
edit
priority
(‡ and §)
+ or ? to scroll through the list
standard/alert
#1 - #7
LTR Escalert‡
on/off
) to select menu item
+ or ? to scroll through sub-list
Companding
on/off
( to return to previous menu level
—or—
Hold down ( to exit menu mode
) to select sub-menu item
Alert Vol Lvl
Phone List
(p. 69)
LTR RadioCall
List‡
(p. 50)
voice
memo
Utilities
(p. 85)
Audio/Tones
(p. 83)
on/off
on/off
Delete
(p. 78)
Selective
Call
Phone
(p. 65)
Keypad Tones
on/off
on/off/set time
Language
Select
English/French/
Portugese/
Spanish
Light
Disable
on/off
When Available (‡)
on/off
Software
Ver#
6864110R11-O_cvr.qxd
11/30/01
2:09 PM
Page 1
Motorola, The Stylized M logo, Professional Radio - As Dedicated As You Are, HT Series,
HT1250•LS+, and Call Alert are trademarks of Motorola, Inc.
PassPort is a trademark of Trident Micro Systems.
LTR is a trademark of E.F. Johnson Company.
© 1999, 2000, 2001 Motorola, Inc. All rights reserved. Printed in U.S.A.
*6864110R11*
6866110R11-O
HT1250•LS+ User Guide
Professional Radio - As Dedicated As You Are™

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:11:20 12:09:59
Producer                        : Acrobat Distiller 4.05 for Windows
Creator                         : Windows NT 4.0
Title                           : Untitled Document
Modify Date                     : 2002:01:25 16:05:13-06:00
Page Count                      : 51

EXIF Metadata provided by EXIF.tools