Motorola Solutions 99FT7002 Radio Bluetooth Adapter User Manual

Motorola Solutions, Inc. Radio Bluetooth Adapter

Exhibit D Users Manual per 2 1033 b3

AccessoriesRadioAdapter (RBA)6880309K16-Ofor the Professional Radio SeriesModel HHLN4125
and MOTOROLA are registered trademarks of Motorola, Inc.The BLUETOOTH trademarks are owned by Telefonaktiebolaget LM Ericsson, Sweden, and licensed to Motorola, Inc.
1TABLE OF CONTENTSSafety and General Information. . . . . . . . . . . . . . . . .3Electromagnetic Interference/CompatibilityFacilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Aircraft. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Medical Devices. . . . . . . . . . . . . . . . . . . . . . . . . . .4Safety and GeneralUse While Driving . . . . . . . . . . . . . . . . . . . . . . . . .9Bluetooth Wireless Technology Overview . . . . . . . . .6Getting StartedInstalling the Radio Bluetooth Adapter (RBA) . . . .8Removing the Radio Bluetooth Adapter (RBA) . . .9Turning ON the RBA. . . . . . . . . . . . . . . . . . . . . . . .9Establishing the Bluetooth WirelessConnection. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Connection Verification . . . . . . . . . . . . . . . . . . . .10Lost Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Turning OFF the RBA . . . . . . . . . . . . . . . . . . . . . .11Disconnecting the Bluetooth WirelessConnection. . . . . . . . . . . . . . . . . . . . . . . . . . . .12LED Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . .13OperationOperational Range . . . . . . . . . . . . . . . . . . . . . . . .14Receiving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Transmitting. . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . .15VOX (Voice Activated Transmission) . . . . . . . . . .15
2BatteryLow Battery Alert. . . . . . . . . . . . . . . . . . . . . . . . .16Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Temperature Effects On Your RBA . . . . . . . . . . . . . .16RBA Replacement Parts Lists . . . . . . . . . . . . . . . . .17Service and Support. . . . . . . . . . . . . . . . . . . . . . . . .17Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Replacing the HHLN4125 Side Connector Board. . .18
3SAFETY AND GENERAL INFORMATIONIMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.READ THIS INFORMATION BEFORE USING YOUR RADIO.Users are not permitted to make changes or modify the device in any way. Changes or modifi-cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. See 47 CFR Sec. 15.21.This device complies with Part 15 of the U.S. FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interfer-ence, and (2) this device must accept any inter-ference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3).
4ELECTROMAGNETIC INTERFERENCE/COMPATIBILITYOTE: Nearly every electronic device is sus-ceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromag-netic compatibility.FacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your device in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your device when on board an aircraft. Any use of your device must be in accordance with applicable regula-tions per airline crew instructions.Medical DevicesPacemakersThe Health Industry Manufacturers Association recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a N
5wireless device and a pacemaker. These recom-mendations are consistent with the independent research by, and recommendations of, Wireless Technology Research.Persons with pacemakers should:•ALWAYS keep the wireless device more than 6 inches (15 centimeters) from their pacemaker when the device is turned ON.•not carry the device in the breast pocket.•use the ear opposite the pacemaker to min-imize the potential for interference.•turn the device OFF immediately if you have any reason to suspect that interfer-ence is taking place.Hearing AidsSome digital wireless radios may interfere with some hearing aids. In the event of such interfer-ence, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to deter-mine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
6BLUETOOTH WIRELESS TECHNOLOGY OVERVIEWAt Motorola we believe that easy portable com-munication is the key to creating a safer environ-ment. That’s why we designed this exciting new two-way communication device called the Radio Bluetooth Adapter (RBA). The RBA represents another breakthrough in applying Bluetooth wire-less technology by Motorola. This adapter allows your radio to send and receive audio from a wire-less accessory such as a Remote Speaker Micro-phone (RSM) without wires.This RBA uses a new protocol based on state-of-the-art Bluetooth technology specifications, which result in simplifying the use of your radio. Bluetooth wireless technology is an open stan-dard, connecting wireless devices within a short range. The range for this particular adapter (RBA) and the Bluetooth audio accessory is approximately 30 feet in ideal line-of-sight condi-tions. It is important to be aware that the specific Bluetooth technology was designed and engi-neered for use between your radio and special Bluetooth audio accessories. Your Bluetooth audio accessory will not operate with other non- Motorola two-way radio Bluetooth products.
7If your radio is VOX (voice activated transmission) capable, the Bluetooth wireless functionality will continue with your adapter and a VOX capable Bluetooth wireless headset.We’re confident that once you try the Bluetooth wireless adapter and accessories, you’ll wonder how you survived with all those attachment wires in the first place!Figure 1. Radio Bluetooth AdapterBLUE Button LatchScrewPTT(Push-To-Talk)LEDIndicator
8GETTING STARTEDInstalling the Radio Bluetooth Adapter (RBA)OTE: The RBA is designed to clip onto the back of specially designed radio batteries.1. Place the bottom of the RBA to the battery. Press the top latch of the RBA to the battery until it snaps into place. Refer to Figure 2.2. Attach the side connector to the radio’s accessory connector. Secure the side con-nector with the metal screw using a coin or thin bladed screwdriver.NFigure 2. RBA and Radio AttachmentLatchMetalScrewSideConnector
9Removing the Radio Bluetooth Adapter (RBA)1. Detach the side connector from the acces-sory connector with the metal screw using a coin or thin bladed screwdriver.2. Detach the top latch by pressing down and pulling the RBA away from the battery.Turning ON the RBAThe RBA turns ON when the radio is turned ON. The RBA LED lights GREEN for one second, indicating successful power-up. When you first turn on your RBA, it will first attempt to establish a connection with the last Bluetooth audio acces-sory it was connected to, otherwise it will attempt to connect to a new accessory.Establishing the Bluetooth Wireless ConnectionFollowing these simple steps establishes a new connection when your RBA and audio accessory are first turned on:1. Turn ON your radio. The RBA turns on when the radio is turned on. •The RBA LED lights GREEN for one sec-ond, indicating successful power-up.2. Turn ON the Bluetooth wireless capable audio accessory. (Refer to your accessory manual.)
103. Place the audio accessory next to the radio. (For best results keep both within a few inches of each other.) •The RBA LED flashes ORANGE until a successful connection is established. If a connection has not been established, the LED flashes RED.•Once the RBA and audio accessory have connected, the RBA LED flashes GREEN every few seconds.OTE: Connecting for the first time takes longer to establish than subsequent connec-tions.Connection VerificationYou may want to verify the wireless connection before you start communicating with the acces-sory.OTE: Pressing the audio accessory PTT but-ton first, keys-up the radio1. Press and hold the RBA BLUE button.2. Press the audio accessory PTT button.•The RBA LED lights a solid GREEN for the duration of the audio accessory PTT press. If this does not happen, the connection was not established and the connection process will have to be repeated.NN
11Lost LinkIf the connection is lost at any time, the RBA LED flashes ORANGE until the connection is re-estab-lished. If a connection has not been re-established within 30 seconds the LED flashes RED.OTE: During the attempt to re-establish a con-nection, your radio and PTT button func-tion normally.Turning OFF the RBAIf a wireless connection is established, you can turn off your RBA without losing its memory to the connection with the audio accessory. The con-nection is automatically re-established the next time the RBA is turned on.1. To turn OFF the RBA, turn off the radio.2. To turn ON the RBA, turn on the radio. N
12Disconnecting the Bluetooth Wireless ConnectionYou can disconnect and re-establish the connec-tion when both the RBA and audio accessory are still on.1. Press both the RBA BLUE and PTT buttons.•The RBA LED flashes RED, indicating the connection is broken.2. To re-establish the connection while the RBA and audio accesory are on, place the RBA within a few inches of the audio accessory. Press both the RBA’s BLUE and PTT but-tons, then immediately press both the audio accessory’s BLUE and PTT buttons.
13LED IndicatorsRBA LED Indicator DescriptionGREEN Solid GREEN for 1 second, indicates suc-cessful RBA power-up, or...Solid GREEN for 1 second, indicates suc-cessful connection with an accessory, or...Solid GREEN for duration of the PTT press or while receiving, indicates the RBA is functioning correctly.Flashing GREEN Flashes GREEN every few seconds when connected to the radio and no communica-tion or transmission is taking place.Flashing ORANGE Flashes ORANGE every few seconds, indi-cates the RBA is attempting to reconnect or reconnect to the accessory.RED Solid RED for 1 second followed by flashing orange, indicates that connection is lost and is attempting to reconnect to the accessory, or...Flashing RED Flashes RED every few seconds, indicates connection is disconnected and has not been re-established within 30 seconds.
14OPERATION Operational RangeFor optimum performance from your RBA, use it within 30 feet of your audio accessory. This range will vary depending on environmental conditions, i.e. clothing, radio placement on body, buildings.ReceivingOnce the RBA is connected to your audio acces-sory, the radio speaker mutes and the audio is heard only from the audio accessory. •While receiving, the RBA LED lights a solid GREEN for the duration of the received communication.Transmitting The Push-To-Talk (PTT) button on either the audio accessory or the RBA initiates transmission.OTES: Pressing the audio accessory or RBA PTT button activates only the micro-phone in the audio accessory.Pressing the radio’s PTT button acti-vates only the microphone in the radio.•While transmitting, the RBA LED lights a solid GREEN for the duration of the trans-mission.N
15Volume ControlRefer to your Bluetooth wireless audio accessory manual for any volume control instructions.VOX (Voice Activated Transmission) (Available only with select VOX capable radios)If your radio is VOX capable and has been pro-grammed into the radio, this feature can be enabled to operate with the RBA and an audio accessory. OTE: VOX can only be enabled on the RBA during radio power up.To Activate VOX1. Turn off your radio.2. Press and hold the RBA PTT button while turning on the radio. Release the PTT button after power-up.3. Turn on your audio accessory.4. Turn your radio to the assigned VOX channel.5. Establish the wireless connection. Refer to “Establishing the Bluetooth Wireless Connec-tion” on page 9.•Once the connection has been established, your radio and audio accessory operate in VOX mode.N
16To De-activate VOXPress either the RBA or audio accessory PTT button.•The radio exits VOX mode and returns to normal operation.BATTTERYYour RBA and battery are safe to charge in your current radio’s battery charger.Low Battery AlertRefer to your radio’s operator manual for specific battery instructions.Battery LifeRefer to your radio’s operator manual for specific battery instructions.TEMPERATURE EFFECTS ON YOUR RBAYour RBA was designed to work in all environ-ments your current radio is designed for. Refer to your radio’s manual for specific details.
17RBA REPLACEMENT PARTS LISTSSERVICE AND SUPPORTYour RBA is not repairable. If there is a problem with the unit after the warranty period, please order a replacement unit or replacement parts. To order replacement parts or for warranty informa-tion, contact Motorola Americas Accessories Aftermarket Division (AAD) at:1-800-422-4210 or 847-538-8023.WARRANTYThe RBA is covered under the standard Motorola one (1) year limited warranty:Refer to your Motorola dealer for detailed infor-mation on your RBA’s standard warranty.Parts List for HHLN4125Replacement Part MotorolaPart NumberSide Connector Screw 0380475E01Side Connector Assembly 0185724M01Radio Battery (for use with HHLN4125) HNN9003RBA Replacement Parts Instruction Sheet 6880309K91
18REPLACING THE HHLN4125 SIDE CONNECTOR BOARDDisassembling the RBA before the one (1) year limited warranty has expired will void the warranty.Disassembling the Side Connector Board1. Detach the RBA from the radio.2. Remove the two screws in the housing/button assem-bly using a T6 Torx® driver.3. Gently pull the rubber gas-ket from the housing/button assembly.4. Lift the cover flap of the 15-pin connector and dis-connect the flex connector from the board.5. Repeat Steps 1 through 3 to disassemble the replacement side connector.Reassembling the Side Connector Board1. Lift the cover flap of the 15-pin connector and connect the RBA flex connector to the board removed from the replacement side connec-tor.Screws
192. Flip the board over so the 7-pin connector is facing upward.3. Place the board into the housing so that it is seated properly onto the board retention shelf.4. Carefully press the rubber gasket into the housing/button assembly starting at the strain relief. Slowly continue pressing the remain-ing three sides of the gasket into the hous-ing/button assembly. Make sure that the seal on the gasket is completely tucked into the housing/but-ton assembly.AUTION: Do Not use any instruments to tuck or remove the gasket from the housing/but-ton assembly. Doing so can stretch and damage the seal on the gasket.ShelfC
205. Replace the two screws into the housing/but-ton assembly using a T6 Torx® driver.6. Re-attach the RBA to the radio.
*6880309K16*6880309K16-O© 2001 by Motorola, Inc.Printed in the U.S.A. All Rights Reserved.

Navigation menu