Motorola Ds3478 Users Manual Symbol Scanner Product Reference Guide 72E 72109 04 Rev. A)

2015-01-23

• Symbol DS3478 Product Reference Guide
  • Patents
  • Revision History
• Table of Contents
• About This Guide
  • Introduction
  • Configurations
  • Chapter Descriptions
  • Notational Conventions
  • Related Publications
  • Service Information
• Getting Started
  • Introduction
    • Smart Focus Scanning
    • Host Interfaces
  • Unpacking the Digital Scanner
  • The Digital Scanner Cradle
    • Cradle Parts
    • Connecting the Cradle
    • Supplying Power to the Cradle
    • Connecting a Synapse Cable Interface
    • Reestablishing a Lost Connection to Host
    • Mounting the Cradle
  • Removing and Inserting the Battery
  • Charging the Battery
    • Charging LED
    • Charging Problem LED
  • Inserting the Digital Scanner in the Cradle
  • Pairing
    • Unpairing
  • Configuring the Digital Scanner
• Digital Scanning
  • Introduction
  • Beeper Definitions
  • LED Definitions
  • Digital Scanning
    • Aiming
  • Decode Zones
    • DS3478-SF Near Focus - 1D and PDF417
    • DS3478-SF Near Focus - 2D Codes
    • DS3478-SF Far Focus
    • DS3478-SF Smart Focus
    • DS3478-HD/DPM Near Focus - 1D and PDF417
    • DS3478-HD/DPM Near Focus - 2D Codes
    • DS3478-HD/DPM Far Focus
    • DS3478-HD/DMP Smart Focus
• Maintenance and Technical Specifications
  • Introduction
  • Maintenance
  • Troubleshooting
  • Technical Specifications
  • Digital Scanner Signal Descriptions
• User Preferences
  • Introduction
  • Scanning Sequence Examples
  • Errors While Scanning
  • User Preferences Default Parameters
  • User Preferences
    • Set Default Parameter
    • Parameter Scanning
    • Beeper Tone
    • Beeper Volume
    • Power Mode
    • Beep After Good Decode
    • Picklist Mode
    • Decode Session Timeout
    • Fuzzy 1D Decoding
    • Decode Mirror Images (Data Matrix Only)
  • Radio Communications
    • Connection Maintenance Interval
    • Radio Output Power
    • Parameter Broadcast
    • Single Point/Multipoint Operation
• Decoding Preferences
  • Introduction
  • Scanning Sequence Examples
  • Errors While Scanning
  • Decoding Preferences Parameter Defaults
  • Decoding Preferences
    • Focus Mode
    • Decoding Illumination
    • Decode Aiming Pattern
    • DPM Scanning
• Keyboard Wedge Interface
  • Introduction
  • Connecting a Keyboard Wedge Interface
  • Keyboard Wedge Default Parameters
  • Keyboard Wedge Parameters
    • Keyboard Wedge Host Types
    • Keyboard Wedge Country Types (Country Codes)
    • Ignore Unknown Characters
    • Keystroke Delay
    • Intra-Keystroke Delay
    • Alternate Numeric Keypad Emulation
    • Caps Lock On
    • Caps Lock Override
    • Convert Wedge Data
    • Function Key Mapping
    • FN1 Substitution
    • Send Make and Break
  • Keyboard Maps
  • ASCII Character Set
• RS-232 Interface
  • Introduction
  • Connecting an RS-232 Interface
  • RS-232 Default Parameters
  • RS-232 Host Parameters
    • RS-232 Host Types
    • Baud Rate
    • Parity
    • Check Receive Errors
    • Stop Bit Select
    • Data Bits
    • Hardware Handshaking
    • Software Handshaking
    • Host Serial Response Time-out
    • RTS Line State
    • Beep on <BEL>
    • Intercharacter Delay
    • Nixdorf Mode A/B and OPOS/JPOS Beep/LED Options
    • Ignore Unknown Characters
  • ASCII Character Set
• USB Interface
  • Introduction
  • USB Default Parameters
  • USB Host Parameters
    • USB Device Type
    • USB Country Keyboard Types (Country Codes)
    • USB Keystroke Delay
    • USB Caps Lock Override
    • USB Ignore Unknown Characters
    • Emulate Keypad
    • USB Keyboard FN1 Substitution
    • Function Key Mapping
    • Simulated Caps Lock
    • Convert Case
  • ASCII Character Set
• IBM 468X/469X Interface
  • Introduction
  • Connecting to an IBM 468X/469X Host
  • IBM Default Parameters
  • IBM 468X/469X Host Parameters
    • Port Address
    • Convert Unknown to Code 39
• Wand Emulation Interface
  • Introduction
  • Connecting a Wand Emulation Interface
  • Wand Emulation Default Parameters
  • Wand Emulation Host Parameters
    • Wand Emulation Host Types
    • Leading Margin (Quiet Zone)
    • Polarity
    • Ignore Unknown Characters
    • Convert All to Code 39
    • Convert Code 39 to Full ASCII
• Scanner Emulation Interface
  • Introduction
  • Connecting Using Scanner Emulation
  • Scanner Emulation Default Parameters
  • Scanner Emulation Host Parameters
    • Scanner Emulation Host
    • Beep Style
    • Parameter Pass-Through
    • Convert Newer Code Types
    • Module Width
    • Convert All Bar Codes to Code 39
    • Code 39 Full ASCII Conversion
    • Transmission Timeout
    • Ignore Unknown Characters
    • Leading Margin
    • Check for Decode LED
• 123Scan
  • Introduction
  • Setting Up 123Scan
• Symbologies
  • Introduction
  • Scanning Sequence Examples
  • Errors While Scanning
  • Symbology Default Parameters
  • UPC/EAN
    • Enable/Disable UPC-A
    • Enable/Disable UPC-E
    • Enable/Disable UPC-E1
    • Enable/Disable EAN-13
    • Enable/Disable EAN-8
    • Enable/Disable Bookland EAN
    • Decode UPC/EAN Supplementals
    • User-Programmable Supplementals
    • UPC/EAN Supplemental Redundancy
    • Transmit UPC-A/UPC-E/UPC-E1 Check Digit
    • UPC-A Preamble
    • UPC-E Preamble
    • UPC-E1 Preamble
    • Convert UPC-E to UPC-A
    • Convert UPC-E1 to UPC-A
    • EAN-8 Extend
    • Bookland ISBN Format
    • UCC Coupon Extended Code
  • Code 128
    • Enable/Disable Code 128
    • Set Lengths for Code 128
    • Enable/Disable GS1-128 (formerly UCC/EAN-128)
    • Enable/Disable ISBT 128
  • Code 39
    • Enable/Disable Code 39
    • Enable/Disable Trioptic Code 39
    • Convert Code 39 to Code 32
    • Code 32 Prefix
    • Set Lengths for Code 39
    • Code 39 Check Digit Verification
    • Transmit Code 39 Check Digit
    • Code 39 Full ASCII Conversion
    • Code 39 Buffering (Scan & Store)
  • Code 93
    • Enable/Disable Code 93
    • Set Lengths for Code 93
  • Code 11
    • Code 11
    • Set Lengths for Code 11
    • Code 11 Check Digit Verification
    • Transmit Code 11 Check Digits
  • Interleaved 2 of 5 (I 2 of 5)
    • Enable/Disable Interleaved 2 of 5
    • Set Lengths for Interleaved 2 of 5
    • I 2 of 5 Check Digit Verification
    • Transmit I 2 of 5 Check Digit
    • Convert I 2 of 5 to EAN-13
  • Discrete 2 of 5 (D 2 of 5)
    • Enable/Disable Discrete 2 of 5
    • Set Lengths for Discrete 2 of 5
  • Codabar (NW - 7)
    • Enable/Disable Codabar
    • Set Lengths for Codabar
    • CLSI Editing
    • NOTIS Editing
  • MSI
    • Enable/Disable MSI
    • Set Lengths for MSI
    • MSI Check Digits
    • Transmit MSI Check Digit(s)
    • MSI Check Digit Algorithm
  • Inverse 1D
  • Postal Codes
    • US Postnet
    • US Planet
    • UK Postal
    • Transmit UK Postal Check Digit
    • Japan Postal
    • Australian Postal
    • Dutch Postal
    • 4State Postal
    • Post US4
    • Transmit US Postal Check Digit
  • GS1 DataBar (formerly RSS - Reduced Space Symbology)
    • GS1 DataBar-14
    • GS1 DataBar Limited
    • GS1 DataBar Expanded
    • Convert GS1 DataBar to UPC/EAN
  • Composite
    • Composite CC-C
    • Composite CC-A/B
    • Composite TLC-39
    • UPC Composite Mode
    • GS1-128 Emulation Mode for UCC/EAN Composite Codes
  • 2D Symbologies
    • Enable/Disable PDF417
    • Enable/Disable MicroPDF417
    • Code 128 Emulation
    • Data Matrix
    • Data Matrix Inverse
    • Maxicode
    • QR Code
    • MicroQR
    • QR Inverse
    • Aztec
    • Aztec Inverse
  • Redundancy Level
    • Redundancy Level 1
    • Redundancy Level 2
    • Redundancy Level 3
    • Redundancy Level 4
  • Security Level
    • Security Level 0
    • Security Level 1
    • Security Level 2
    • Security Level 3
    • Intercharacter Gap Size
  • Macro PDF Features
    • Flush Macro Buffer
    • Abort Macro PDF Entry
• Miscellaneous Scanner Options
  • Introduction
  • Scanning Sequence Examples
  • Errors While Scanning
  • Miscellaneous Default Parameters
  • Miscellaneous Scanner Parameters
    • Transmit Code ID Character
    • Prefix/Suffix Values
    • Scan Data Transmission Format
    • FN1 Substitution Values
    • Transmit “No Read” Message
    • Report Version
• Advanced Data Formatting
  • Introduction
  • Rules: Criteria Linked to Actions
  • Creating ADF Rules
  • ADF Programming Example
    • Rule 1: The Code 128 Scanning Rule
    • Rule 2: The UPC Scanning Rule
  • Alternate Rule Sets
  • Rules Hierarchy (in Bar Codes)
  • Default Rules
  • Special Considerations for Multipoint Networks
  • ADF Bar Codes
  • Special Commands
    • Pause Duration
    • Begin New Rule
    • Save Rule
    • Erase
    • Quit Entering Rules
    • Disable Rule Set
  • Criteria
    • Code Types
    • Code Lengths
    • Message Containing a Specific Data String
  • Actions
    • Send Data
    • Setup Field(s)
    • Modify Data
    • Pad Data with Spaces
    • Pad Data with Zeros
    • Beeps
    • Send Keystroke (Control Characters and Keyboard Characters)
    • Send Right Control Key
    • Send Graphic User Interface (GUI) Characters
    • Turn On Rule Sets
    • Turn Off Rule Sets
  • Alphanumeric Keyboard
• Standard Default Parameters
• Programming Reference
  • Symbol Code Identifiers
  • AIM Code Identifiers
• Sample Bar Codes
  • UPC-A
  • UPC-E
  • UPC-E1
  • EAN-13
  • EAN-8
  • Code 39
  • Trioptic Code 39
  • Code 93
  • Code 11
  • Codabar
  • MSI
  • Interleaved 2 of 5
  • GS1 DataBar-14
  • PDF417
  • Data Matrix
  • Maxicode
  • QR Code
  • US Postnet
  • UK Postal
• Numeric Bar Codes
  • 0, 1, 2, 3
  • 4, 5, 6, 7
  • 8, 9
  • Cancel
• Index
• Tell Us What You Think...