Motorola Razr H3 Users Manual

H3 to the manual 35fc3516-a525-4d1e-bfb4-6cdbdfbe98d0

: Motorola Motorola-Razr-H3-Users-Manual-271298 motorola-razr-h3-users-manual-271298 motorola pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

BEFORE YOU
BEGIN

1

CHARGE YOUR
HEADSET

Start Here > > >
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.

H3
Bluetooth®
Handsfree Headset

Earhook

Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196

Call
Button
Volume
Buttons

Microphone

Blue
Indicator
Light

TURN ON BLUETOOTH
ON YOUR PHONE AND
PAIR WITH HEADSET

www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)

Your phone's Bluetooth feature is off by
default. To use your headset, turn on the
Bluetooth feature in your phone.

Guide Number: 6809498A97-O

1 Select M (Menu ) > Settings > Connection >

To turn on Bluetooth:

Bluetooth Link > Setup.

MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and
their accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2005.

Call Button
Blue Indicator Light

1 Plug the Motorola charger into the end of
the headset.
The blue indicator light turns on when the
battery is charging. It may take up to 1
minute for the light to turn on. When the
headset's battery is fully charged (about 2
hours), the blue indicator light turns off.

TURN ON BLUETOOTH
ON YOUR PHONE AND
PAIR WITH HEADSET
7 Select [Look for Devices].
Note: Do not select STOP--you will automatically be
taken to the next screen.

8 Select Motorola H3.
9 Select Yes to bond.

3 Press Change.

10 Enter the passkey 0000 and select OK.

4 Select On.

When your headset and phone are successfully
paired, the blue light on your headset will
change from steadily lit to flashing.

6 Select Handsfree.

Note: The blue light will flash as you press and hold the Call
button. Continue holding down the Call button until the blue
light is steadily lit.
Note: If you let go of the Call button before the blue light is
on and steady, ensure that your headset is off before trying
again.
Note: To turn off headset, see "Turning Headset On/Off" on
the reverse side of this guide.

4

TEST AND USE

Continued

2 Scroll to Power.

5 Select Back.

With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit.

2 Unplug the charger from the headset.
Note: Headset is not functional while charging.

3

PUT YOUR HEADSET
IN PAIRING MODE

Before you can use your headset, you must
pair (link) it with your phone.

Take a moment before you get started to
familiarize yourself with your new
H3 Handsfree Headset.

Get Connected in
4 Quick Steps
1 - CHARGE YOUR
HEADSET
2 - PUT HEADSET
IN PAIR MODE
3 - PAIR PHONE
WITH HEADSET
4 - TEST AND USE

Charge your headset's battery for 2 hours:

2

Note: This procedure is for most Motorola phones. For other
phones, see your phone's user's guide or visit
www.hellomoto.com/bluetoothsupport and click Set Up My
New Product.

Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:

1 Place the headset over your ear. See

"Wearing the Headset" on the reverse side
of this guide.

2 On your phone, dial the number you want
to call and press the Send key.

3 If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.

TROUBLESHOOTING
My phone does not find my headset.
Make sure the blue light on your headset is
steadily lit when your phone is searching for
devices (see step 2).
My headset worked before but now it's
not working.
Make sure your phone is on and the
Bluetooth feature is turned on in your phone
(see step 3). If the Bluetooth feature has
been turned off or was turned on only
temporarily, you may need to restart the
Bluetooth feature (see step 3). If you have
confirmed the Bluetooth feature is on in your
phone, pair your phone and headset again
(see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/bluetooth and click
Support.

USING YOUR H3
See Features and Functions Guide
on the reverse side
of this guide
for information on
using your H3.

Features and
Functions Guide
H3
Bluetooth®
Handsfree Headset

WEARING THE
HEADSET

TURNING HEADSET
ON/OFF

CHANGING FOR USE
ON OTHER EAR

2 Loop the earhook over your ear.

You can wear your H3 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:

If you change your headset to wear on the
other ear, you can also change the
orientation of the volume buttons.

3 Press the headset to your ear.

1 Open the earhook 90

1 Turn the headset power off.

To turn your headset on, press and hold
the Call button until the indicator light
flashes. Then, release the button.

1 Open the earhook.

To turn your headset off, press and hold
the Call button until the indicator light
flashes rapidly and then turns off.

degrees from the
headset.

2 Press the Call button along with the

Volume button you want to assign as
"volume up" button until the indicator
light flashes twice.

2 Gently lift and pull the

IMPORTANT:
Be sure to first follow the

CHANGING VOLUME
BUTTON ORIENTATION

top of the earhook up
and off the upper
hinge pin. Then, pull it
away to remove it.

Call
Button

1 Open Earhook

The headset power turns on.
2 Pull Earhook Up

Call
Button

3 Flip the headset over.

Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H3.

4 Hook the bottom of
the earhook onto the
lower hinge pin, then
lift and pull the top of
the earhook over the
upper hinge pin.

3
4

MAKING CALLS

MAKING CALLS CONTINUED

The indicator light provides information about
your headset status.

Action

Function

Action

Make a voice dial call

Tap the Call button
and speak the
name after the tone

Toggle between two
active calls

Press and hold
the Call button

Join a 3-way call

End a call

Tap the Call button

Press and hold
both Volume buttons

Receive a call

Tap the Call button

Reject a call

Press and hold the
Call button until you
hear a beep

Put an active call on
hold or resume a call
on hold

Press and hold the
Call button until you
hear a beep

Transfer a call from the
phone to the headset

Tap the Call button

Disable or enable the
indicator light

Press and hold
both Volume
buttons for 3 to 4
seconds

Headset Indicator
Off
On (steady)
10 rapid flashes
Slow pulse

Mute or unmute a call

Tap both Volume
buttons

Quick flash

Answer a second
incoming call

Press and hold the
Call button until you
hear a beep
Press and hold the
Call button (places
first call on hold)

Note: Your H3 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.

Note: Some features are phone/network dependent.

Hinge Pin

INDICATOR LIGHTS

Function

Redial last call

Volume
Buttons

With the Charger Plugged In
Headset Indicator
Headset Status
On (steady)
Charging
Off
Charging complete
With No Charger Plugged In
Headset Status
Power off
Pairing mode
Pairing successful
Connected
(on a call)
Standby
(not on call)

Note: After 5 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.

AUDIO TONES
The audio tones provide information about your
headset status.
Audio Tone
Single high tone when
pressing volume button
Five rapid high tones
repeated every 60 sec.
No audio indications;
deteriorating quality
Ring tone
Single high tone
Single low tone
Dual high/low tone
Single high tone
Low to high tone
Two ascending tones
Two descending tones

Headset Status
Volume at minimum
or maximum
Low battery
Out of range
Incoming call
Pairing confirmation
Voice activation
Voice tag not
recognized
End call
Phone network
not available
Mute enabled
Mute disabled



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2006:07:06 10:00:24-05:00
Modify Date                     : 2006:07:06 10:00:24-05:00
Metadata Date                   : 2006:07:06 09:58:14-05:00
Document ID                     : uuid:B84DCFC9FF0CDB118DDE891B1D9FE59B
Instance ID                     : uuid:56806d04-bcb9-4cf8-85d2-f537e1cf2414
Derived From Instance ID        : uuid:dc89f83b-9875-4717-b596-861f2bf07215
Derived From Document ID        : uuid:d12e0221-7967-4533-8b78-cac007c421c4
Format                          : application/postscript
Title                           : untitled
Page Count                      : 2

EXIF Metadata provided by EXIF.tools