Motorola Razr H3 Users Manual

H3 to the manual 35fc3516-a525-4d1e-bfb4-6cdbdfbe98d0

: Motorola Motorola-Razr-H3-Users-Manual-271298 motorola-razr-h3-users-manual-271298 motorola pdf

Open the PDF directly: View PDF .
Page Count: 2

1 - CHARGE YOUR

HEADSET

2 - PUT HEADSET

IN PAIR MODE

3 - PAIR PHONE

WITH HEADSET

4 - TEST AND USE

Get Connected in

4 Quick Steps

H3

Bluetooth®

Handsfree Headset

BEFORE YOU

BEGIN

1

Charge your headset's battery for 2 hours:

Plug the Motorola charger into the end of

the headset.

The blue indicator light turns on when the

battery is charging. It may take up to 1

minute for the light to turn on. When the

headset's battery is fully charged (about 2

hours), the blue indicator light turns off.

Unplug the charger from the headset.

1

2

Before using this product, read the Important Safety and

Legal Information pamphlet and follow its instructions.

CHARGE YOUR

HEADSET

Earhook

Your phone and headset are now paired and

ready to make and receive calls. To confirm

they are operating properly, make a call:

TEST AND USE

Place the headset over your ear. See

"Wearing the Headset" on the reverse side

of this guide.

On your phone, dial the number you want

to call and press the Sendkey.

If your phone and headset are successfully

paired, you will hear ringing on the headset.

4

1

2

USING YOUR H3

TROUBLESHOOTING

My phone does not find my headset.

Make sure the blue light on your headset is

steadily lit when your phone is searching for

devices (see step 2).

My headset worked before but now it's

not working.

Make sure your phone is on and the

Bluetooth feature is turned on in your phone

(see step 3). If the Bluetooth feature has

been turned off or was turned on only

temporarily, you may need to restart the

Bluetooth feature (see step 3). If you have

confirmed the Bluetooth feature is on in your

phone, pair your phone and headset again

(see step 3).

Support.

If you need more help, contact us at

1-877-MOTOBLU or visit us at

www.hellomoto.com/bluetooth and click

Support.

MOTOROLA and the Stylized M Logo are registered in the US

Patent & Trademark Office. The use of wireless devices and

their accessories may be prohibited or restricted in certain areas.

Always obey the laws and regulations on the use of these

products. The Bluetooth trademarks are owned by their

proprietor and used by Motorola, Inc. under license. All other

product or service names are the property of their respective

owners.

© Motorola, Inc. 2005.

Motorola, Inc.

Consumer Advocacy Office

1307 East Algonquin Road

Schaumburg, IL 60196

www.hellomoto.com

1-877-MOTOBLU

1-888-390-6456 (TTY/TDD United States for

hearing impaired)

Guide Number: 6809498A97-O

3

Take a moment before you get started to

familiarize yourself with your new

H3 Handsfree Headset.

Volume

Buttons

Blue

Indicator

Light

Call

Button

Microphone

See Features and Functions Guide

on the reverse side

of this guide

for information on

using your H3.

After you have successfully paired your phone

and headset, you do not need to repeat these

initial setup steps each time you use the

headset.

When your headset and phone are successfully

paired, the blue light on your headset will

change from steadily lit to flashing.

Note: This procedure is for most Motorola phones. For other

phones, see your phone's user's guide or visit

www.hellomoto.com/bluetoothsupport and click Set Up My

New Product.

PUT YOUR HEADSET

IN PAIRING MODE

2

Call Button

With the headset power off, press and hold

the Call button for 6 to 10 seconds until the

blue indicator light turns on and remains

steadily lit.

Before you can use your headset, you must

pair (link) it with your phone.

Blue Indicator Light

Note: The blue light will flash as you press and hold the Call

button. Continue holding down the Call button until the blue

light is steadily lit.

Note: If you let go of the Call button before the blue light is

on and steady, ensure that your headset is off before trying

again.

Note: To turn off headset, see "Turning Headset On/Off" on

the reverse side of this guide.

Note: Headset is not functional while charging.

TURN ON BLUETOOTH

ON YOUR PHONE AND

PAIR WITH HEADSET

3

Select (Menu)> Settings > Connection >

Bluetooth Link > Setup.

Scroll to Power.

Press Change.

Select On.

Select Back.

Select Handsfree.

1

2

3

4

M

Your phone's Bluetooth feature is off by

default. To use your headset, turn on the

Bluetooth feature in your phone.

To turn on Bluetooth:

Start Here>>>

Select [Look for Devices].

Note: Do not select STOP--you will automatically be

taken to the next screen.

Select Motorola H3.

Select Yes to bond.

Enter the passkey 0000 and select OK.

TURN ON BLUETOOTH

ON YOUR PHONE AND

PAIR WITH HEADSET

Continued

5

6

7

8

9

10

3

4

TURNING HEADSET

ON/OFF

MAKING CALLS

To turn your headset on, press and hold

the Call button until the indicator light

flashes. Then, release the button.

To turn your headset off, press and hold

the Call button until the indicator light

flashes rapidly and then turns off.

INDICATOR LIGHTS

IMPORTANT:

Be sure to first follow the

Quick Start Guide

on the reverse side

of this guide

to complete initial setup

of your H3.

WEARING THE

HEADSET

Open the earhook.

Loop the earhook over your ear.

Press the headset to your ear.

1

2

3

AUDIO TONES

The audio tones provide information about your

headset status.

Audio Tone Headset Status

Single high tone when Volume at minimum

pressing volume button or maximum

Five rapid high tones Low battery

repeated every 60 sec.

No audio indications; Out of range

deteriorating quality

Ring tone Incoming call

Single high tone Pairing confirmation

Single low tone Voice activation

Dual high/low tone Voice tag not

recognized

Single high tone End call

Low to high tone Phone network

not available

Two ascending tones Mute enabled

Two descending tones Mute disabled

Call

Button

Note: Your H3 supports both Handsfree and Headset

Profiles. Accessing call functions depends upon which

profile your phone supports. See your phone's user's guide

for more information.

Function Action

Make a voice dial call Tap the Call button

and speak the

name after the tone

End a call Tap the Call button

Receive a call Tap the Call button

Reject a call Press and hold the

Call button until you

hear a beep

Redial last call Press and hold the

Call button until you

hear a beep

Answer a second Press and hold the

incoming call Call button (places

first call on hold)

MAKING CALLS CONTINUED

Function Action

Toggle between two Press and hold

active calls the Call button

Join a 3-way call Press and hold

both Volume buttons

Put an active call on Press and hold the

hold or resume a call Call button until you

on hold hear a beep

Transfer a call from the Tap the Call button

phone to the headset

Disable or enable the Press and hold

indicator light both Volume

buttons for 3 to 4

seconds

Mute or unmute a call Tap both Volume

buttons

Note: Some features are phone/network dependent.

The indicator light provides information about

your headset status.

With the Charger Plugged In

Headset Indicator Headset Status

On (steady) Charging

Off Charging complete

With No Charger Plugged In

Headset Indicator Headset Status

Off Power off

On (steady) Pairing mode

10 rapid flashes Pairing successful

Slow pulse Connected

(on a call)

Quick flash Standby

(not on call)

Note: After 5 minutes of inactivity, the light stops flashing to

conserve power, but the headset remains in standby mode.

Features and

Functions Guide

H3

Bluetooth®

Handsfree Headset

CHANGING FOR USE

ON OTHER EAR

Open the earhook 90

degrees from the

headset.

Gently lift and pull the

top of the earhook up

and off the upper

hinge pin. Then, pull it

away to remove it.

Flip the headset over.

Hook the bottom of

the earhook onto the

lower hinge pin, then

lift and pull the top of

the earhook over the

upper hinge pin.

1

2

3

4

You can wear your H3 headset on your left or

right ear. The headset comes ready for the right

ear. To change the headset for the left ear:

CHANGING VOLUME

BUTTON ORIENTATION

If you change your headset to wear on the

other ear, you can also change the

orientation of the volume buttons.

Turn the headset power off.

Press the Call button along with the

Volume button you want to assign as

"volume up" button until the indicator

light flashes twice.

The headset power turns on.

1

2

2Pull Earhook Up

Hinge Pin

1Open Earhook

Volume

Buttons

Call

Button