Motorola Symbol Ls3578 Quick Reference Guide Product (72E 93911 02 Rev A)

2014-12-11

• Symbol LS3578 Product Reference Guide
  • Patents
  • Warranty
  • Revision History
• Table of Contents
• About This Guide
  • Introduction
  • Chapter Descriptions
  • Notational Conventions
  • Related Documents
  • Service Information
• Getting Started
  • Introduction
  • Unpacking the Scanner
  • The Cradle
    • Cradle Parts
    • Connecting the Cradle
    • Supplying Power to the Cradle
    • Connecting a Synapse Cable Interface
    • Mounting the Cradle
  • Inserting the Battery
    • Removing the Battery
  • Charging the Scanner Battery in the Cradle
    • Scanner Charging LED
  • Inserting the Scanner in the Cradle
  • Sending Data to the Host Computer
    • Pairing
    • Lost Connection to Host
  • Configuring the Scanner
  • Radio Communications
• Scanning
  • Introduction
  • Beeper Definitions
  • LED Definitions
  • Scanning
    • Aiming
  • Decode Zone
• Maintenance and Technical Specifications
  • Introduction
  • Maintenance
    • Battery Maintenance
  • Troubleshooting
  • Technical Specifications
  • Scanner Signal Descriptions
• Radio Communications
  • Introduction
    • Scanning Sequence Examples
    • Errors While Scanning
  • Radio Communications Parameter Defaults
  • Wireless Beeper Definitions
  • Radio Communications Host Types
  • Bluetooth Technology Profile Support
    • Master/Slave Set Up
    • Bluetooth Friendly Name
    • Discoverable Mode
  • HID Host Parameters
    • HID Country Keyboard Types (Country Codes)
    • HID Keyboard Keystroke Delay
    • HID CAPS Lock Override
    • HID Ignore Unknown Characters
    • Emulate Keypad
    • HID Keyboard FN1 Substitution
    • HID Function Key Mapping
    • Simulated Caps Lock
    • Convert Case
  • Auto-reconnect Feature
    • Reconnect Attempt Beep Feedback
    • Reconnect Attempt Interval
    • Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode
  • Out of Range Indicator
  • Scanner(s) To Cradle Support
    • Modes of Operation
    • Parameter Broadcast (Cradle Host Only)
    • Pairing
    • Pairing Bar Code Format
    • Connection Maintenance Interval
  • Bluetooth Security
    • Authentication
    • PIN Code
    • Encryption
• User Preferences
  • Introduction
  • Scanning Sequence Examples
  • Errors While Scanning
  • User Preferences Default Parameters
  • User Preferences
    • Default Parameters
    • Beeper Tone
    • Beeper Volume
    • Laser On Time
    • Beep After Good Decode
    • Trigger Mode
    • Aim Duration
    • Beep on Insertion
    • Time Delay to Reduced Power Mode
    • Transmit Code ID Character
    • Scan Angle
    • Prefix/Suffix Values
    • Scan Data Transmission Format
    • FN1 Substitution Values
    • Transmit “No Read” Message
    • Synapse Interface
    • Batch Mode
  • Report Scanner Version
  • Report Scan Engine Version
  • Report MIMIC Version
  • Report Synapse Cable
• Keyboard Wedge Interface
  • Introduction
  • Connecting a Keyboard Wedge Interface
  • Keyboard Wedge Default Parameters
  • Keyboard Wedge Host Types
    • Keyboard Wedge Host Types
    • Keyboard Wedge Country Types (Country Codes)
    • Ignore Unknown Characters
    • Keystroke Delay
    • Intra-Keystroke Delay
    • Alternate Numeric Keypad Emulation
    • Caps Lock On
    • Caps Lock Override
    • Convert Wedge Data
    • Function Key Mapping
    • FN1 Substitution
    • Send Make and Break
  • Keyboard Maps
  • ASCII Character Set
• RS-232 Interface
  • Introduction
  • Connecting an RS-232 Interface
  • RS-232 Default Parameters
  • RS-232 Host Parameters
    • RS-232 Host Types
    • Baud Rate
    • Parity
    • Check Receive Errors
    • Stop Bit Select
    • Data Bits
    • Hardware Handshaking
    • Software Handshaking
    • Host Serial Response Time-out
    • RTS Line State
    • Beep on <BEL>
    • Intercharacter Delay
    • Nixdorf Mode A/B and OPOS/JPOS Beep/LED Options
    • Ignore Unknown Characters
  • ASCII / Character Set
• USB Interface
  • Introduction
  • Connecting a USB Interface
  • USB Default Parameters
  • USB Host Parameters
    • USB Device Type
    • USB Country Keyboard Types (Country Codes)
    • USB Keystroke Delay
    • USB Caps Lock Override
    • USB Ignore Unknown Characters
    • Emulate Keypad
    • USB Keyboard FN 1 Substitution
    • Function Key Mapping
    • Simulated Caps Lock
    • Convert Case
  • ASCII Character Set
• IBM 468X/469X Interface
  • Introduction
  • Connecting to an IBM 468X/469X Host
  • IBM Default Parameters
  • IBM 468X/469X Host Parameters
    • Port Address
    • Convert Unknown to Code 39
• 123Scan
  • Introduction
  • Setting Up 123Scan
• Symbologies
  • Introduction
  • Scanning Sequence Examples
  • Errors While Scanning
  • Symbology Default Parameters
  • UPC/EAN
    • Enable/Disable UPC-A
    • Enable/Disable UPC-E
    • Enable/Disable UPC-E1
    • Enable/Disable EAN-13
    • Enable/Disable EAN-8
    • Enable/Disable Bookland EAN
    • Decode UPC/EAN/JAN Supplementals
    • User-Programmable Supplementals
    • UPC/EAN/JAN Supplemental Redundancy
    • Transmit UPC-A/UPC-E/UPC-E1 Check Digit
    • UPC-A Preamble
    • UPC-E Preamble
    • UPC-E1 Preamble
    • Convert UPC-E to UPC-A
    • Convert UPC-E1 to UPC-A
    • EAN-8/JAN-8 Extend
    • Bookland ISBN Format
    • UCC Coupon Extended Code
  • Code 128
    • Enable/Disable Code 128
    • Enable/Disable UCC/EAN-128
    • Enable/Disable ISBT 128
  • Code 39
    • Enable/Disable Code 39
    • Enable/Disable Trioptic Code 39
    • Convert Code 39 to Code 32
    • Code 32 Prefix
    • Set Lengths for Code 39
    • Code 39 Check Digit Verification
    • Transmit Code 39 Check Digit
    • Code 39 Full ASCII Conversion
  • Code 93
    • Enable/Disable Code 93
    • Set Lengths for Code 93
  • Code 11
    • Code 11
    • Set Lengths for Code 11
    • Code 11 Check Digit Verification
    • Transmit Code 11 Check Digits
  • Interleaved 2 of 5 (I 2 of 5)
    • Enable/Disable Interleaved 2 of 5
    • Set Lengths for Interleaved 2 of 5
    • I 2 of 5 Check Digit Verification
    • Transmit I 2 of 5 Check Digit
    • Convert I 2 of 5 to EAN-13
  • Discrete 2 of 5 (D 2 of 5)
    • Enable/Disable Discrete 2 of 5
    • Set Lengths for Discrete 2 of 5
  • Codabar (NW - 7)
    • Enable/Disable Codabar
    • Set Lengths for Codabar
    • CLSI Editing
    • NOTIS Editing
  • MSI
    • Enable/Disable MSI
    • Set Lengths for MSI
    • MSI Check Digits
    • Transmit MSI Check Digit(s)
    • MSI Check Digit Algorithm
  • GS1 DataBar
    • GS1 DataBar-14
    • GS1 DataBar Limited
    • GS1 DataBar Expanded
    • Convert GS1 DataBar to UPC/EAN
  • Redundancy Level
    • Redundancy Level 1
    • Redundancy Level 2
    • Redundancy Level 3
    • Redundancy Level 4
  • Security Level
    • Security Level 0
    • Security Level 1
    • Security Level 2
    • Security Level 3
  • Bi-directional Redundancy
• Advanced Data Formatting
  • Introduction
  • Rules: Criteria Linked to Actions
  • Using ADF Bar Codes
  • ADF Bar Code Menu Example
    • Rule 1: The Code 128 Scanning Rule
    • Rule 2: The UPC Scanning Rule
    • Alternate Rule Sets
    • Rules Hierarchy (in Bar Codes)
    • Default Rules
  • Special Commands
    • Pause Duration
    • Begin New Rule
    • Save Rule
    • Erase
    • Quit Entering Rules
    • Disable Rule Set
  • Criteria
    • Code Types
    • Code Lengths
    • Message Containing A Specific Data String
  • Actions
    • Send Data
    • Setup Field(s)
    • Modify Data
    • Pad Data with Spaces
    • Pad Data with Zeros
    • Beeps
    • Send Keystroke (Control Characters and Keyboard Characters)
    • Send Right Control Key
    • Send Graphic User Interface (GUI) Characters
    • Turn On/Off Rule Sets
  • Alphanumeric Keyboard
• Standard Default Parameters
• Programming Reference
  • Symbol Code Identifiers
  • AIM Code Identifiers
• Sample Bar Codes
  • UPC-A
  • UPC-E
  • UPC-E1
  • EAN-13
  • EAN-8
  • Code 39
  • Trioptic Code 39
  • Code 93
  • Code 11
  • Codabar
  • MSI
  • Interleaved 2 of 5
• Numeric Bar Codes
  • 0, 1, 2, 3
  • 4, 5, 6, 7
  • 8, 9
  • Cancel
• Alphanumeric Bar Codes
  • Alphanumeric Keyboard
• Index
• Tell Us What You Think...