Motorola Symbol Ls3578 Quick Reference Guide Product (72E 93911 02 Rev A)
2014-12-11
: Motorola Motorola-Symbol-Ls3578-Quick-Reference-Guide-120694 motorola-symbol-ls3578-quick-reference-guide-120694 motorola pdf
Open the PDF directly: View PDF 
.
Page Count: 378
| Download | |
| Open PDF In Browser | View PDF |
Symbol LS3578 Product Reference Guide Symbol LS3578 Product Reference Guide 72E-93911-02 Revision A April 2008 ii Symbol LS3578 Product Reference Guide © 2007-2008 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Motorola reserves the right to make changes to any software or product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Motorola products. MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the US Patent & Trademark Office. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation. All other product or service names are the property of their respective owners. Motorola, Inc. One Motorola Plaza Holtsville, New York 11742-1300 http://www.symbol.com Patents This product is covered by one or more of the patents listed on the website: http://www.symbol.com/patents. Warranty For the complete Motorola hardware product warranty statement, go to: http://www.symbol.com/warranty. iii Revision History Changes to the original manual are listed below: Change Date Description -01 Rev A 5/2007 Initial release. -02 Rev A 4/2008 Remove HID Profile (Master) option, add Discoverable Mode parameter, update Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode options, update Pairing Mode information, add French Belgian country codes. iv Symbol LS3578 Product Reference Guide Table of Contents About This Guide Introduction .................................................................................................................... Chapter Descriptions ..................................................................................................... Notational Conventions.................................................................................................. Related Documents ....................................................................................................... Service Information........................................................................................................ xiii xiii xiv xv xv Chapter 1: Getting Started Introduction ................................................................................................................... Unpacking the Scanner ................................................................................................ The Cradle .................................................................................................................... Cradle Parts ............................................................................................................ Connecting the Cradle ............................................................................................ Supplying Power to the Cradle ............................................................................... Connecting a Synapse Cable Interface .................................................................. Mounting the Cradle ................................................................................................ Inserting the Battery ...................................................................................................... Removing the Battery ............................................................................................. Charging the Scanner Battery in the Cradle ................................................................. Scanner Charging LED ........................................................................................... Inserting the Scanner in the Cradle .............................................................................. Sending Data to the Host Computer ............................................................................. Pairing ..................................................................................................................... Lost Connection to Host .......................................................................................... Configuring the Scanner ............................................................................................... Radio Communications ................................................................................................. 1-1 1-2 1-2 1-3 1-4 1-6 1-6 1-6 1-7 1-8 1-8 1-8 1-9 1-10 1-10 1-10 1-10 1-10 Chapter 2: Scanning Introduction ................................................................................................................... Beeper Definitions ........................................................................................................ LED Definitions ............................................................................................................. Scanning ....................................................................................................................... 2-1 2-1 2-4 2-5 vi Symbol LS3578 Product Reference Guide Aiming ..................................................................................................................... 2-6 Decode Zone ................................................................................................................ 2-7 Chapter 3: Maintenance and Technical Specifications Introduction ................................................................................................................... Maintenance ................................................................................................................. Battery Maintenance ............................................................................................... Troubleshooting ............................................................................................................ Technical Specifications ............................................................................................... Scanner Signal Descriptions ......................................................................................... 3-1 3-1 3-1 3-2 3-5 3-7 Chapter 4: Radio Communications Introduction ................................................................................................................... Scanning Sequence Examples ............................................................................... Errors While Scanning ............................................................................................ Radio Communications Parameter Defaults ................................................................. Wireless Beeper Definitions .......................................................................................... Radio Communications Host Types ............................................................................. Bluetooth Technology Profile Support .......................................................................... Master/Slave Set Up ............................................................................................... Bluetooth Friendly Name ........................................................................................ Discoverable Mode ................................................................................................. HID Host Parameters .................................................................................................... HID Country Keyboard Types (Country Codes) ...................................................... HID Keyboard Keystroke Delay .............................................................................. HID CAPS Lock Override ........................................................................................ HID Ignore Unknown Characters ............................................................................ Emulate Keypad ...................................................................................................... HID Keyboard FN1 Substitution .............................................................................. HID Function Key Mapping ..................................................................................... Simulated Caps Lock .............................................................................................. Convert Case .......................................................................................................... Auto-reconnect Feature ................................................................................................ Reconnect Attempt Beep Feedback ....................................................................... Reconnect Attempt Interval ..................................................................................... Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode ..................... Out of Range Indicator .................................................................................................. Scanner(s) To Cradle Support ...................................................................................... Modes of Operation ................................................................................................ Parameter Broadcast (Cradle Host Only) ............................................................... Pairing ..................................................................................................................... Pairing Bar Code Format ........................................................................................ Connection Maintenance Interval ........................................................................... Bluetooth Security ......................................................................................................... Authentication ......................................................................................................... PIN Code ................................................................................................................ Encryption ............................................................................................................... 4-1 4-1 4-1 4-2 4-3 4-4 4-6 4-6 4-7 4-7 4-8 4-9 4-11 4-11 4-12 4-12 4-13 4-13 4-14 4-14 4-15 4-15 4-16 4-18 4-19 4-20 4-20 4-21 4-21 4-24 4-24 4-27 4-27 4-28 4-29 Table of Contents Chapter 5: User Preferences Introduction ................................................................................................................... 5-1 Scanning Sequence Examples ..................................................................................... 5-2 Errors While Scanning .................................................................................................. 5-2 User Preferences Default Parameters .......................................................................... 5-2 User Preferences .......................................................................................................... 5-4 Default Parameters ................................................................................................. 5-4 Beeper Tone ........................................................................................................... 5-5 Beeper Volume ....................................................................................................... 5-6 Laser On Time ........................................................................................................ 5-7 Beep After Good Decode ........................................................................................ 5-7 Trigger Mode ........................................................................................................... 5-8 Aim Duration ........................................................................................................... 5-9 Beep on Insertion .................................................................................................... 5-9 Time Delay to Reduced Power Mode ..................................................................... 5-10 Transmit Code ID Character ................................................................................... 5-11 Scan Angle .............................................................................................................. 5-11 Prefix/Suffix Values ................................................................................................. 5-12 Scan Data Transmission Format ............................................................................. 5-13 FN1 Substitution Values .......................................................................................... 5-15 Transmit “No Read” Message ................................................................................. 5-15 Synapse Interface ................................................................................................... 5-16 Batch Mode ............................................................................................................. 5-17 Report Scanner Version ................................................................................................ 5-19 Report Scan Engine Version ......................................................................................... 5-19 Report MIMIC Version .................................................................................................. 5-19 Report Synapse Cable .................................................................................................. 5-19 Chapter 6: Keyboard Wedge Interface Introduction ................................................................................................................... 6-1 Connecting a Keyboard Wedge Interface ..................................................................... 6-2 Keyboard Wedge Default Parameters .......................................................................... 6-3 Keyboard Wedge Host Types ....................................................................................... 6-4 Keyboard Wedge Host Types ................................................................................. 6-4 Keyboard Wedge Country Types (Country Codes) ................................................. 6-5 Ignore Unknown Characters ................................................................................... 6-7 Keystroke Delay ...................................................................................................... 6-7 Intra-Keystroke Delay .............................................................................................. 6-8 Alternate Numeric Keypad Emulation ..................................................................... 6-8 Caps Lock On ......................................................................................................... 6-9 Caps Lock Override ................................................................................................ 6-9 Convert Wedge Data ............................................................................................... 6-10 Function Key Mapping ............................................................................................ 6-10 FN1 Substitution ...................................................................................................... 6-11 Send Make and Break ............................................................................................. 6-11 Keyboard Maps ............................................................................................................. 6-12 ASCII Character Set ..................................................................................................... 6-14 vii viii Symbol LS3578 Product Reference Guide Chapter 7: RS-232 Interface Introduction ................................................................................................................... Connecting an RS-232 Interface .................................................................................. RS-232 Default Parameters .......................................................................................... RS-232 Host Parameters .............................................................................................. RS-232 Host Types ................................................................................................. Baud Rate ............................................................................................................... Parity ....................................................................................................................... Check Receive Errors ............................................................................................. Stop Bit Select ........................................................................................................ Data Bits ................................................................................................................. Hardware Handshaking .......................................................................................... Software Handshaking ............................................................................................ Host Serial Response Time-out .............................................................................. RTS Line State ........................................................................................................ Beep on....................................................................................................... Intercharacter Delay ................................................................................................ Nixdorf Mode A/B and OPOS/JPOS Beep/LED Options ........................................ Ignore Unknown Characters ................................................................................... ASCII / Character Set ................................................................................................... 7-1 7-2 7-3 7-4 7-6 7-7 7-9 7-10 7-11 7-11 7-12 7-14 7-16 7-17 7-17 7-18 7-19 7-20 7-20 Chapter 8: USB Interface Introduction ................................................................................................................... Connecting a USB Interface ......................................................................................... USB Default Parameters .............................................................................................. USB Host Parameters .................................................................................................. USB Device Type .................................................................................................... USB Country Keyboard Types (Country Codes) .................................................... USB Keystroke Delay ............................................................................................. USB Caps Lock Override ........................................................................................ USB Ignore Unknown Characters ........................................................................... Emulate Keypad ...................................................................................................... USB Keyboard FN 1 Substitution ............................................................................ Function Key Mapping ............................................................................................ Simulated Caps Lock .............................................................................................. Convert Case .......................................................................................................... ASCII Character Set ..................................................................................................... 8-1 8-2 8-4 8-5 8-5 8-6 8-8 8-9 8-9 8-10 8-10 8-11 8-11 8-12 8-13 Chapter 9: IBM 468X/469X Interface Introduction ................................................................................................................... Connecting to an IBM 468X/469X Host ........................................................................ IBM Default Parameters ............................................................................................... IBM 468X/469X Host Parameters ................................................................................. Port Address ........................................................................................................... Convert Unknown to Code 39 ................................................................................. 9-1 9-2 9-3 9-4 9-4 9-4 Table of Contents Chapter 10: 123Scan Introduction ................................................................................................................... 10-1 Setting Up 123Scan ...................................................................................................... 10-1 Chapter 11: Symbologies Introduction ................................................................................................................... 11-1 Scanning Sequence Examples ..................................................................................... 11-1 Errors While Scanning .................................................................................................. 11-1 Symbology Default Parameters .................................................................................... 11-2 UPC/EAN ...................................................................................................................... 11-5 Enable/Disable UPC-A ............................................................................................ 11-5 Enable/Disable UPC-E ............................................................................................ 11-5 Enable/Disable UPC-E1 .......................................................................................... 11-6 Enable/Disable EAN-13 .......................................................................................... 11-6 Enable/Disable EAN-8 ............................................................................................ 11-7 Enable/Disable Bookland EAN ................................................................................ 11-7 Decode UPC/EAN/JAN Supplementals .................................................................. 11-8 User-Programmable Supplementals ....................................................................... 11-11 UPC/EAN/JAN Supplemental Redundancy ............................................................ 11-12 Transmit UPC-A/UPC-E/UPC-E1 Check Digit ........................................................ 11-12 UPC-A Preamble ..................................................................................................... 11-14 UPC-E Preamble ..................................................................................................... 11-15 UPC-E1 Preamble ................................................................................................... 11-16 Convert UPC-E to UPC-A ....................................................................................... 11-17 Convert UPC-E1 to UPC-A ..................................................................................... 11-17 EAN-8/JAN-8 Extend .............................................................................................. 11-18 Bookland ISBN Format ........................................................................................... 11-19 UCC Coupon Extended Code ................................................................................. 11-20 Code 128 ...................................................................................................................... 11-21 Enable/Disable Code 128 ....................................................................................... 11-21 Enable/Disable UCC/EAN-128 ................................................................................ 11-22 Enable/Disable ISBT 128 ........................................................................................ 11-22 Code 39 ........................................................................................................................ 11-23 Enable/Disable Code 39 ......................................................................................... 11-23 Enable/Disable Trioptic Code 39 ............................................................................. 11-23 Convert Code 39 to Code 32 .................................................................................. 11-24 Code 32 Prefix ........................................................................................................ 11-24 Set Lengths for Code 39 ......................................................................................... 11-25 Code 39 Check Digit Verification ............................................................................ 11-26 Transmit Code 39 Check Digit ................................................................................ 11-26 Code 39 Full ASCII Conversion .............................................................................. 11-27 Code 93 ........................................................................................................................ 11-28 Enable/Disable Code 93 ......................................................................................... 11-28 Set Lengths for Code 93 ......................................................................................... 11-28 Code 11 ........................................................................................................................ 11-30 Code 11 ................................................................................................................... 11-30 Set Lengths for Code 11 ......................................................................................... 11-31 Code 11 Check Digit Verification ............................................................................ 11-32 Transmit Code 11 Check Digits .............................................................................. 11-33 ix x Symbol LS3578 Product Reference Guide Interleaved 2 of 5 (I 2 of 5) ............................................................................................ Enable/Disable Interleaved 2 of 5 ........................................................................... Set Lengths for Interleaved 2 of 5 ........................................................................... I 2 of 5 Check Digit Verification ............................................................................... Transmit I 2 of 5 Check Digit ................................................................................... Convert I 2 of 5 to EAN-13 ...................................................................................... Discrete 2 of 5 (D 2 of 5) ............................................................................................... Enable/Disable Discrete 2 of 5 ................................................................................ Set Lengths for Discrete 2 of 5 ............................................................................... Codabar (NW - 7) ......................................................................................................... Enable/Disable Codabar ......................................................................................... Set Lengths for Codabar ......................................................................................... CLSI Editing ............................................................................................................ NOTIS Editing ......................................................................................................... MSI ............................................................................................................................... Enable/Disable MSI ................................................................................................ Set Lengths for MSI ................................................................................................ MSI Check Digits .................................................................................................... Transmit MSI Check Digit(s) ................................................................................... MSI Check Digit Algorithm ...................................................................................... GS1 DataBar ................................................................................................................ GS1 DataBar-14 ..................................................................................................... GS1 DataBar Limited .............................................................................................. GS1 DataBar Expanded ......................................................................................... Convert GS1 DataBar to UPC/EAN ........................................................................ Redundancy Level ........................................................................................................ Redundancy Level 1 ............................................................................................... Redundancy Level 2 ............................................................................................... Redundancy Level 3 ............................................................................................... Redundancy Level 4 ............................................................................................... Security Level ............................................................................................................... Security Level 0 ...................................................................................................... Security Level 1 ...................................................................................................... Security Level 2 ...................................................................................................... Security Level 3 ...................................................................................................... Bi-directional Redundancy ............................................................................................ Chapter 12: Advanced Data Formatting Introduction ................................................................................................................... Rules: Criteria Linked to Actions ................................................................................... Using ADF Bar Codes .................................................................................................. ADF Bar Code Menu Example ..................................................................................... Rule 1: The Code 128 Scanning Rule .................................................................... Rule 2: The UPC Scanning Rule ............................................................................ Alternate Rule Sets ................................................................................................. Rules Hierarchy (in Bar Codes) .............................................................................. Default Rules .......................................................................................................... Special Commands ....................................................................................................... Pause Duration ....................................................................................................... 11-34 11-34 11-34 11-36 11-36 11-37 11-37 11-37 11-38 11-39 11-39 11-40 11-41 11-41 11-42 11-42 11-43 11-44 11-45 11-45 11-46 11-46 11-46 11-47 11-47 11-48 11-48 11-48 11-49 11-49 11-50 11-50 11-50 11-50 11-51 11-51 12-1 12-1 12-2 12-2 12-3 12-3 12-3 12-4 12-5 12-5 12-5 Table of Contents Begin New Rule ...................................................................................................... 12-5 Save Rule ................................................................................................................ 12-5 Erase ....................................................................................................................... 12-6 Quit Entering Rules ................................................................................................. 12-6 Disable Rule Set ..................................................................................................... 12-7 Criteria .......................................................................................................................... 12-8 Code Types ............................................................................................................. 12-8 Code Lengths .......................................................................................................... 12-12 Message Containing A Specific Data String ........................................................... 12-16 Actions .......................................................................................................................... 12-21 Send Data ............................................................................................................... 12-21 Setup Field(s) .......................................................................................................... 12-24 Modify Data ............................................................................................................. 12-30 Pad Data with Spaces ............................................................................................. 12-31 Pad Data with Zeros ................................................................................................ 12-36 Beeps ...................................................................................................................... 12-41 Send Keystroke (Control Characters and Keyboard Characters) ........................... 12-42 Send Right Control Key ........................................................................................... 12-78 Send Graphic User Interface (GUI) Characters ...................................................... 12-79 Turn On/Off Rule Sets ............................................................................................. 12-84 Alphanumeric Keyboard ................................................................................................ 12-86 Appendix A: Standard Default Parameters Appendix B: Programming Reference Symbol Code Identifiers ................................................................................................ B-1 AIM Code Identifiers ..................................................................................................... B-2 Appendix C: Sample Bar Codes UPC-A ........................................................................................................................... C-1 UPC-E ........................................................................................................................... C-1 UPC-E1 ......................................................................................................................... C-2 EAN-13 ......................................................................................................................... C-2 EAN-8 ........................................................................................................................... C-2 Code 39 ........................................................................................................................ C-2 Trioptic Code 39 ............................................................................................................ C-3 Code 93 ........................................................................................................................ C-3 Code 11 ........................................................................................................................ C-3 Codabar ........................................................................................................................ C-3 MSI ................................................................................................................................ C-4 Interleaved 2 of 5 .......................................................................................................... C-4 Appendix D: Numeric Bar Codes 0, 1, 2, 3 ........................................................................................................................ D-1 4, 5, 6, 7 ........................................................................................................................ D-2 8, 9 ................................................................................................................................ D-3 xi xii Symbol LS3578 Product Reference Guide Cancel ........................................................................................................................... D-3 Appendix E: Alphanumeric Bar Codes Alphanumeric Keyboard ............................................................................................... E-1 Glossary Index Tell Us What You Think... About This Guide Introduction The Symbol LS3578 Product Reference Guide provides general instructions for setting up, operating, maintaining, and troubleshooting the scanner. The Symbol LS3578 includes the following variations of the scanner: • Symbol LS3578-FZ: 1-D scanning • Symbol LS3578-ER: extended range 1-D scanning. Chapter Descriptions Topics covered in this guide are as follows: • Chapter 1, Getting Started provides a product overview and unpacking instructions. • Chapter 2, Scanning describes parts of the scanner, beeper and LED definitions, and how to use the scanner. • Chapter 3, Maintenance and Technical Specifications provides information on how to care for the scanner, troubleshooting, and technical specifications. • Chapter 4, Radio Communications provides information about the modes of operation and features available for wireless communication between scanners, cradles and hosts, and also includes the parameters necessary to configure the scanner. • Chapter 5, User Preferences describes each user preference feature and provides the programming bar codes for selecting these features for the scanner. It also includes commonly used bar codes to customize how data is transmitted to the host device. • Chapter 6, Keyboard Wedge Interface provides information for setting up the scanner for keyboard wedge operation. • Chapter 7, RS-232 Interface provides information for setting up the scanner for RS-232 operation. • Chapter 8, USB Interface provides information for setting up the scanner for USB operation. • Chapter 9, IBM 468X/469X Interface provides information for setting up the scanner with IBM 468X/469X POS systems. xiv Symbol LS3578 Product Reference Guide • Chapter 10, 123Scan provides information on the PC-based scanner configuration tool 123Scan. • Chapter 11, Symbologies describes all symbology features and provides the programming bar codes for selecting these features. • Chapter 12, Advanced Data Formatting (ADF) describes how to customize scanned data before transmitting to the host. • Appendix A, Standard Default Parameters provides a table of all host devices and miscellaneous scanner defaults. • Appendix B, Programming Reference provides a table of AIM code identifiers, ASCII character conversions, and keyboard maps. • Appendix C, Sample Bar Codes includes sample bar codes. • Appendix D, Numeric Bar Codes includes the numeric bar codes to scan for parameters requiring specific numeric values. • Appendix E, Alphanumeric Bar Codes includes the alphanumeric bar codes to scan for parameters requiring alphanumeric values. Notational Conventions The following conventions are used in this document: • Italics are used to highlight the following: • Chapters and sections in this and related documents • Bold text is used to highlight the following: • Key names on a keypad • Button names on a screen or window. • bullets (•) indicate: • Action items • Lists of alternatives • Lists of required steps that are not necessarily sequential • Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists. • Throughout the programming bar code menus, asterisks (*) are used to denote default parameter settings. * Indicates Default NOTE *Baud Rate 9600 Feature/Option This symbol indicates something of special interest or importance to the reader. Failure to read the note will not result in physical harm to the reader, equipment or data. About This Guide CAUTION xv This symbol indicates that if this information is ignored, the possiblity of data or material damage may occur. WARNING! This symbol indicates that if this information is ignored the possibility that serious personal injury may occur. Related Documents • Symbol LS3578 Quick Start Guide (p/n 72-93587-xx) provides general information to help the user get started with the scanner, including basic setup and operation instructions. • Symbol STB3508/3578 Cradle Quick Reference Guide (p/n 72-93912-xx) provides information on installing and operating STB3508/3578 cradles. • Symbol FLB3508/3578 Cradle Quick Reference Guide (p/n 72-94604-xx) provides information on installing and operating FLB3508/3578 cradles. For the latest version of this guide and all guides, go to: http://support.symbol.com. Service Information If you have a problem with your equipment, contact Motorola Enterprise Mobility Support for your region. Contact information is available at: http://www.symbol.com/contactsupport. When contacting Enterprise Mobility Support, please have the following information available: • Serial number of the unit • Model number or product name • Software type and version number. Motorola responds to calls by E-mail, telephone or fax within the time limits set forth in support agreements. If your problem cannot be solved by Motorola Enterprise Mobility Support, you may need to return your equipment for servicing and will be given specific directions. Motorola is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty. If you purchased your Enterprise Mobility business product from a Motorola business partner, contact that business partner for support. xvi Symbol LS3578 Product Reference Guide Chapter 1 Getting Started Introduction The Symbol LS3578 scanner combines excellent scanning performance and advanced ergonomics to provide the best value in a lightweight laser scanner, ensuring comfort and ease of use for extended periods of time. Scan Window Tether Plate LED Indicators Scan Trigger Figure 1-1 Symbol LS3578 Scanner 1-2 Symbol LS3578 Product Reference Guide This scanner supports the following host interfaces through communication with a cradle: • Standard RS-232 connection to a host. • Keyboard wedge connection to a host, where scanned data is interpreted as keystrokes. The following international keyboards are supported (for Windows™ environment): North American, German, French, French Canadian, Spanish, Italian, Swedish, UK English, Japanese, and Brazilian-Portuguese. • IBM® 468X/469X hosts. • USB connection to a host. The scanner autodetects a USB host and defaults to the HID keyboard interface type. Select other USB interface types by scanning programming bar codes. The following international keyboards are supported (for Windows™ environment): North America, German, French, French Canadian, Spanish, Italian, Swedish, UK English, Japanese, and Brazilian-Portuguese. • Synapse capability, which allows connection to a wide variety of host systems using a Synapse cable and Synapse adapter cable. The scanner autodetects the Synapse interface. • Configuration via 123Scan. Unpacking the Scanner Remove the scanner from its packing and inspect it for damage. If the scanner was damaged in transit, contact Motorola Enterprise Mobility Support. See page xv for contact information. KEEP THE PACKING. It is the approved shipping container and should be used if the equipment ever needs to be returned for servicing. The Cradle The cradles serve as a stand and charger for the Symbol LS3578 cordless scanner. Some models also provide a host communication interface. There are four versions of the cradle: • The STB3508 cordless cradle sits on a desktop or mounts on a wall, and charges the Symbol LS3578 cordless scanner. An external power supply or a powered host cable charges the scanner. • The STB3578 cordless cradle sits on a desktop or mounts on a wall, and charges the Symbol LS3578 cordless scanner This cradle also provides host communication by receiving scanner data via a Bluetooth radio, and sending that data to the host through an attached cable. An external power supply or a powered host cable charges the scanner. • The FLB3508 cordless cradle charges the Symbol LS3578 cordless scanner. The cradle attaches to a mounting bracket using three isolators, and the bracket then mounts on the forklift surface. A portable power supply on the forklift provides power to the cradle. • The FLB3578 cordless cradle charges the Symbol LS3578 cordless scanner, and provides host communication by receiving scanner data via a Bluetooth radio, and sending that data to the host through an attached cable. The cradle attaches to a mounting bracket using three isolators, and the bracket then mounts on the forklift surface. A portable power supply on the forklift provides power to the cradle. DO NOT use these cradles with a Symbol LS3478 scanner. Likewise, DO NOT use cradles designed for the LS3478 to charge or provide communication for a Symbol LS3578 scanner. NOTE For more information about communication between the scanner, cradle, and host, see Chapter 4, Radio Communications. For more information about mounting options and procedures, refer to the documentation included with the cradle. Getting Started Cradle Parts Mounting Screw Hole Mounting Screw Hole Pairing Bar Code LED Latch Charging/ Communications Contacts Figure 1-2 Cradle Front View Mounting Screw Hole Latch 1-3 1-4 Symbol LS3578 Product Reference Guide Cable Hook Rubber Feet (STB3508/3578 Only) Mounting Screw Hole Mounting Screw Hole Host Port Power Cable Groove Power Port Host Cable Groove Mounting Screw Hole Converter Knob Figure 1-3 Cradle Back View Connecting the Cradle Important: Connect the interface cable and power supply (if necessary) in the following order to ensure proper operation of the scanner and cradle. Connecting STB3508/3578 Cradle 1. Insert the interface cable into the cradle's host port. See Figure 1-4. 2. Connect the other end of the interface cable to the host. 3. If necessary, connect the power supply to the cradle's power port (if the interface requires, or to allow fast charging of the scanner). 4. Connect the appropriate cable to the power supply and an AC power source, if necessary. 5. If applicable, thread the interface cable over the cable support hook and run the host and power cables into their respective cable grooves. 6. Pair the scanner to the cradle by scanning the pairing bar code on the cradle. 7. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). See the specific host chapter. Getting Started Host Port 1-5 Power Port Figure 1-4 Connecting the Cables to the Cradle NOTE Disconnect the power supply before changing host cables, or the scanner may not recognize the new host. Different cables are required for different hosts. The connectors illustrated in each host chapter are examples only. The connectors may be different from those illustrated, but the steps to connect the scanner remain the same Connecting FLB3508/3578 Cradle 1. Insert the interface cable from the host computer into the cradle's host port. See Figure 1-4. 2. Connect the forklift power supply to the cradle's power port, if applicable. 3. Optionally, thread the host cable over the cable hook and run the host and power cables into their respective cable grooves, or use cable ties to secure them to the mounting plate after attaching it to the cradle. For more information about mounting options and procedures, refer to the documentation included with the cradle. 4. Pair the scanner with the cradle by scanning the pairing bar code on the cradle. 5. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). See the specific host chapter. Changing the Host Interface To connect to a different host, or to the same host using a different cable: 1. Disconnect the power supply from the cradle, if used. 2. Disconnect the interface cable from the host. 3. Connect the interface cable to the new host, or the new interface cable to the existing host. 4. Reconnect the power supply, if required. 5. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). See the specific host chapter. 1-6 Symbol LS3578 Product Reference Guide CAUTION If the scanner does not recognize the host, disconnect the power supply, then reconnect after connecting the host cable. Supplying Power to the Cradle The cradle receives power from one of two sources: • An external power supply. • When connected to the host through an interface cable that supplies power. The cradle detects whether the host or the external supply is supplying power. It always draws power from the external supply when available, regardless of the presence of power from a host. Using the USB Interface to Supply Power When the cradle is connected to the host via the USB interface, the USB port can power the cradle so that an external power supply is not necessary. Note that powering from a USB host charges the scanner at a slower rate than when charging from an external power supply. Connecting a Synapse Cable Interface NOTE Refer to the Synapse Interface Guide provided with the Synapse cable for more information. Symbol’s Synapse Smart Cables enable interfacing to a variety of hosts. The appropriate Synapse cable detects the host. To host Synapse adapter cable Synapse Smart Cable To cradle Figure 1-5 Synapse Cable Connection 1. Insert the Synapse adapter cable into the bottom of the cradle, as described in Connecting the Cables to the Cradle on page 1-5. 2. Align the ‘S’ on the Synapse adapter cable with the ‘S’ on the Synapse Smart Cable and plug the cable in. 3. Connect the other end of the Synapse Smart Cable to the host. Mounting the Cradle For information on mounting the cradle, refer to the documentation included with the cradle. Getting Started 1-7 Inserting the Battery The battery resides in a chamber in the scanner handle. To insert the battery: 1. Insert a coin or flathead screwdriver in the slot at the base of the scanner, then turn the slot counterclockwise to release the latch. 2. Lift the latch. 3. If a battery is already installed, turn the scanner upright to slide the battery out. 4. Slide the new battery into the chamber, with the rounded side toward the back and the contacts facing into the chamber. Figure 1-6 Inserting the Battery 5. Close the latch. 6. Insert a coin or flathead screwdriver in the slot at the base of the scanner, press down gently, and turn the slot clockwise to lock the latch in place. 1-8 Symbol LS3578 Product Reference Guide Removing the Battery To remove the battery: 1. Insert a coin or flathead screwdriver in the slot at the base of the scanner, then turn the slot counterclockwise to release the latch. 2. Lift the latch. 3. Turn the scanner upright to slide the battery out. Charging the Scanner Battery in the Cradle For best performance, fully charge the scanner battery before using the scanner for the first time. To charge the scanner battery, place the scanner in the cradle (see Inserting the Scanner in the Cradle on page 1-9). The battery begins charging when the scanner LED indicator starts flashing green. A complete charge of a fully discharged battery can take up to four hours using external power and up to 10 hours using the interface cable. Charge within the recommended temperature of 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal. For information on maximizing battery life, see Battery Maintenance on page 3-1. Scanner Charging LED The scanner’s green LED indicates charging activity (see Table 2-2 on page 2-4). If the scanner is charging in fast mode (non-bus powered mode), the green LED blinks at a fast rate. If the scanner is charging in slow mode (bus-powered mode), the LED blinks at a slow rate. If the scanner’s red LED begins flashing, indicating a charging problem, remove the scanner from the cradle and replace the battery. If the red LED continues flashing, contact Motorola Enterprise Mobility Support. Getting Started Inserting the Scanner in the Cradle To insert the scanner in the cradle: 1. Insert the scanner into the cradle top first. 2. Push the handle until it clicks into place, engaging the contacts in the cradle and scanner. Figure 1-7 Inserting the Scanner in the Cradle 1-9 1 - 10 Symbol LS3578 Product Reference Guide Sending Data to the Host Computer The cradle receives data from the scanner via a wireless radio connection and transmits it to the host computer via the host cable. The scanner and cradle must be paired for successful wireless communication. Pairing Pairing registers a scanner to the cradle such that the scanner and cradle can exchange information. The STB3578 and FLB3578 operate in two modes: Point-to-Point and Multipoint-to-Point. In Point-to-Point mode, pair the scanner to the cradle either by inserting it in the cradle (if pairing on insertion is enabled), or by scanning the pairing bar code. In Multipoint-to-Point mode, you can pair up to three scanners to one cradle. To use this feature, scan the multipoint bar code in Multipoint-to-Point Communication on page 4-20. The cradle includes pairing bar codes on both its front and back. To pair the scanner with the cradle, scan a pairing bar code. A high-low-high-low beep sequence followed by a low-high beep sequence indicates successful pairing and connection to the remote device. A long low, long high beep sequence indicates unsuccessful pairing. NOTE The pairing bar code that connects the scanner to a cradle is unique to each cradle. Do not scan data or parameters until pairing completes. Lost Connection to Host If scanned data does not transmit to the cradle's host, ensure that all cables are firmly inserted and the power supply is connected to an appropriate AC outlet, if applicable. If scanned data still does not transmit to the host, reestablish a connection with the host: 1. Disconnect the power supply from the cradle. 2. Disconnect the host interface cable from the cradle. 3. Wait three seconds. 4. Reconnect the host interface cable to the cradle. 5. Reconnect the power supply to the cradle, if the host requires. 6. Reestablish pairing with the cradle by scanning the pairing bar code. Configuring the Scanner Use the bar codes in this manual or the 123Scan configuration program to configure the scanner. See Chapter 5, User Preferences and each host chapter for information about programming the scanner using bar code menus. See Chapter 10, 123Scan to configure the scanner using this configuration program. 123Scan includes a help file. Radio Communications The scanner can communicate with remote devices via Bluetooth Technology Profile Support, or by pairing with a cradle. For radio communication parameters, detailed information about operational modes, Bluetooth Technology Profile Support and pairing, see Chapter 4, Radio Communications. Chapter 2 Scanning Introduction This chapter provides beeper and LED definitions, scanning techniques, general scanning instructions and tips, and decode zone diagrams. Beeper Definitions The scanner emits different beeper sequences and patterns to indicate its status. Table 2-1 defines beep sequences that occur during both normal scanning and while programming the scanner. Table 2-1 Standard Beeper Definitions Beeper Sequence Indication Standard Use Short low-short medium-short high beeps Power up. One short high beep A bar code symbol was decoded (if decode beeper is enabled). Four long low beeps A communication error occurred while transmitting a scanned symbol to a host. The data is ignored. This occurs if the scanner is not properly configured or if the scanner has disconnected from the cradle. Low beep The scanner detects power when inserted into a cradle. Note: This feature can be disabled. Low-high-low-high beeps Out of memory - the scanner cannot store the new bar code data. The scanner was inserted in an incompatible/older cradle. Four short high beeps Low battery indication. Five long low beeps Conversion or format error. Wireless Operation Short low-high beeps Scanner has paired with the cradle. 2-2 Symbol LS3578 Product Reference Guide Table 2-1 Standard Beeper Definitions (Continued) Beeper Sequence Indication Short high-low beeps Scanner has unpaired with the cradle. Note: When connected to a remote device using SPP or HID, if a disconnect beep sequence sounds immediately after scanning a bar code, check the host device to determine if it received the transmitted data. The scanner may have transmitted the last bar code scanned after losing the connection. Long low-long high beeps Unsuccessful pairing attempt. See Auto-reconnect Feature on page 4-15. Long low-long high-long low-long high beeps Remote device rejected connection attempt, possibly due to an attempt to pair with a cradle that is already paired with the maximum number of scanners. Four long low beeps 1. A transmission error was detected in a scanned symbol. The data is ignored. This occurs if a unit is not properly configured. Check option setting. 2. When communicating with a cradle, the cradle acknowledges receipt of data. If the acknowledgment is not received, this transmission error beep sequence sounds. Data may still have been received by the host. Check the host system for receipt of transmitted data. If data was not received by the host, re-scan the bar code. Five high beeps Emitted every 5 seconds while a reconnection attempt is in progress. See Auto-reconnect Feature on page 4-15. Parameter Menu Scanning Short high beep Correct entry scanned or correct menu sequence performed. Long low-long high beeps Input error; incorrect bar code, programming sequence, or Cancel scanned. Scanner remains in program mode. Short high-short low beeps Keyboard parameter selected. Enter value using numeric bar codes. Short high-short low-short high-short low beeps Successful program exit with change in the parameter setting. Long low-long high-long low-long high beeps Out of host parameter storage space. See Default Parameters on page 5-4. ADF Programming Normal Data Entry High-low beeps Enter another digit. Add leading zeros to the front if necessary. Low-low beeps Enter another alphabetic character or scan the End of Message bar code. High-high beeps Enter another criterion or action, or scan the Save Rule bar code. High-low-high-low beeps Rule saved. Rule entry mode exited. High-low-low beeps All criteria or actions cleared for current rule, continue entering rule. Scanning Table 2-1 Standard Beeper Definitions (Continued) Beeper Sequence Indication Low beep Delete last saved rule. The current rule is left intact. Low-high-high beeps All rules have been deleted. Short low-short high-short low-short high beeps Out of host ADF parameter storage space. See Default Parameters on page 5-4. ADF Programming Error Indications Low-high-low-high beeps Out of rule memory. Erase some existing rules, then try to save rule again. (It is not necessary to re-enter the current rule.) A Symbol LS3578 scanner was inserted into an STB3478 cradle. Low-high-low beeps ADF transmit error. Cancel rule entry. Rule entry mode exited because of an error or the user asked to exit rule entry. Low-high beeps Entry error, wrong bar code scanned. Re-enter criterion or action. All previously entered criteria and actions are retained. Criteria or action list is too long for a rule. Host Specific USB Only Four high beeps The scanner did not complete initialization. Wait several seconds and scan again. Short low-short medium-short high beeps (power-up sequence) The scanner scanned a USB device type. The scanner must establish communication with the bus before it can operate at the highest power level. Short low-short medium-short high beeps (power-up sequence) occur more than once The USB bus may cause power to the scanner to cycle on and off more than once. This is normal and usually happens when the host PC cold boots. RS-232 only High-high-high-low beeps RS-232 receive error. High beep A character is received and Beep on is enabled (Point-to-Point mode only). 2-3 2-4 Symbol LS3578 Product Reference Guide LED Definitions In addition to beeper sequences, the scanner uses a two-color LED to indicate its status, and the cradle’s LED indicates charge and communication status. Table 2-2 explains scanner LED sequences, and Table 2-3 explains cradle LED sequences. Table 2-2 Scanner LED Status Indications LED Indication Standard Use Off No power is applied to the scanner (battery is discharged or removed); scanner is in low power and ready to scan. Green A bar code was successfully decoded. Red A data transmission error, scanner malfunction, or the Symbol LS3578 scanner was inserted into an STB3478 cradle. Charging Use Green Slow Flash The scanner charges at the slow rate (used when a host cable powers the cradle). Green Fast Flash The scanner charges at the fast rate (used when an external power supply powers the cradle). Red flash Charging problem. Contact Motorola Enterprise Mobility Support. The Symbol LS3578 scanner was inserted into an STB3478 cradle. Red and green flash Temperature fault. Move the cradle to a location where the temperature is 0o - 40o C; optimal charging temperature is 5o - 35o C. Table 2-3 Cradle LED Status Indications LED Indication Flashing Green The cradle is externally powered with a USB host interface that has suspended the cradle. The cradle is no longer connected to the scanner but the can charge the scanner. Scan the pairing bar code to re-pair the scanner. Flashing Red Transmission error, or you inserted an LS3478 scanner into the STB3578 cradle. Scanning 2-5 Scanning See Chapter 1, Getting Started to install and program the scanner. To scan: 1. Aim the scanner at the bar code. 2. Press the scan trigger. Figure 2-1 Aiming the Scanner 3. 4. Ensure the scan line crosses every bar and space of the symbol. RIGHT WRONG 012345 012345 The scanner beeps and the LED turns green to indicate a successful decode. See Table 2-1 and Table 2-2 for beeper and LED definitions. 2-6 Symbol LS3578 Product Reference Guide Aiming Do not hold the scanner directly over the bar code. Laser light reflecting directly back into the scanner from the bar code is known as specular reflection which can make decoding difficult. Tilt the scanner up to 65° forward or back to achieve a successful decode. Simple practice shows what tolerances to work within. 65° 65° Figure 2-2 Optimum Scan Angles Scanning 2-7 Decode Zone in. cm 30 76.2 20 50.8 Note: Typical performance at 68°F (20°C) on high quality Code 39 and UPC symbols. 10 25.4 LS3578 FZ 0 0 2.5" 5 mil 7.25" 2.0" 7.5 mil 10 25.4 15.75" 1.0" 13 mil 100% UPC 24" 20 mil (80%MRD) 0"* 20 mil (31%MRD) 20 50.8 39.5" 26.5" 2.0"* 40 mil 67.0" 30 76.2 55 mil 4.0"* in. 0 cm 0 84.0" 10 25.4 20 50.8 30 76.2 40 101.6 Depth of Field *Minimum distance determined by symbol length and scan angle Figure 2-3 Symbol LS3578-FZ Decode Zone 50 127.0 60 152.4 70 177.8 80 203.2 90 228.6 W i d t h o f F i e l d 2-8 Symbol LS3578 Product Reference Guide in. cm 12 30.5 Note: Typical performance at 73.4°F (23°C) on high quality Code 39 symbols. LS3578 ER 7.5 mil 0.25" 2" 3" 3" 20 mil in. 0 cm 0 20.3 4 10.2 0 0 4 10.2 8 20.3 20" 10 mil 15 mil 8 32" 12 30.5 69" W i d t h o f F i e l d 94" 10 25.4 20 50.8 30 76.2 40 101.6 50 127.0 60 152.4 70 177.8 80 203.2 90 228.6 100 254.0 Depth of Field in. cm 72 182.9 Note: Typical performance at 73.4°F (23°C) on high quality Code 39 symbols. 48 121.9 24 61.0 LS3578 ER 0 0 W i d t h o f 24 61.0 48 121.9 55 mil 15" 180" 72 182.9 70 mil reflective * 365" 100 mil reflective in. 0 cm 0 60 152.4 120 304.8 540" 180 457.2 240 609.6 300 762.0 Depth of Field *Near range determined by degree of reflectivity and width of bar code. Figure 2-4 Symbol LS3578-ER Decode Zone 360 914.4 420 1066.8 480 1219.2 540 1371.6 600 1524.0 F i e l d Chapter 3 Maintenance and Technical Specifications Introduction This chapter provides suggested scanner maintenance, troubleshooting, technical specifications, and signal descriptions (pinouts). Maintenance Cleaning the scan window is the only maintenance required. A dirty window can affect scanning accuracy. • Do not allow any abrasive material to touch the window. • Remove any dirt particles with a damp cloth. • Wipe the window using a tissue moistened with ammonia/water. • Do not spray water or other cleaning liquids directly onto the window. Battery Maintenance When batteries are stored over a year, battery cell manufacturers advise that some irreversible deterioration in overall battery quality may occur. To minimize this loss, they recommend storing batteries half charged in a dry, cool place between 41° and 77°F (5° and 25°C), the cooler the better, and removed from the equipment to prevent the loss of capacity. Batteries should be charged to half capacity at least once a year. In order to charge a battery to half capacity, take a fully discharged battery and charge it for 2 hours. If an electrolyte leakage is observed, avoid any contact with the affected area and properly dispose of the battery. 3-2 Symbol LS3578 Product Reference Guide Troubleshooting Table 3-1 Troubleshooting Problem Possible Causes Possible Solutions Scanner emits short low-short medium-short high beep sequence. Scanner is powering up. Normal when scanner battery is inserted. Nothing happens when scan trigger is pressed. No power to the scanner. Check battery. Ensure that end cap to battery chamber is secured. Scanner is disabled. For Simple Serial Interface (SSI), Synapse, or IBM-468x mode, enable the scanner via the host interface. Otherwise, call Motorola Enterprise Mobility Support (see page xv) for contact information). If using RS-232 Nixdorf B mode, CTS is not asserted. Assert CTS line. Scanner is not programmed for the correct bar code type. Ensure the scanner is programmed to read the type of bar code being scanned. Bar code symbol is unreadable. Check the symbol to ensure it is not defaced. Try scanning test bar codes of the same bar code type. See Appendix C, Sample Bar Codes for test bar codes. Bar code is out of range of the scanner. Move scanner closer to or further from bar code. Scanner emits four short high beeps. Battery is low. Charge the battery. See Charging the Scanner Battery in the Cradle on page 1-8. Scanner emits a disconnect (short high-short low) beep sequence. Scanner has disconnected from cradle because it is too far from the cradle. Move closer to the cradle and listen for a reconnection beep (short low-short high). Scanner has disconnected from the cradle because the cradle has lost power or been placed in USB suspend mode. Check power connections to cradle, and if using a USB cable, check to make sure PC has not entered a power save mode. Laser comes on, but scanner does not decode the bar code. Maintenance and Technical Specifications 3-3 Table 3-1 Troubleshooting (Continued) Problem Scanner emits four long low beeps after scanning a bar code. Possible Causes Possible Solutions Incorrect host interface cable is used. Ensure that correct host interface cable is used. Interface/power cables to cradle are loose. Ensure all cable connections are secure. Scanner is not paired to a cradle. Scan the PAIR bar code on the cradle that is connected to the host that is to receive data. Scanner has disconnected. See disconnect beep sequence above. A transmission error was detected. Ensure the cradle’s communication parameters match the host's setting. Cradle has not completed USB initialization. Wait several seconds and scan again. Scanner not paired to host-connected cradle. Pair the scanner to the cradle (using PAIR bar code on the cradle). Cradle not programmed for correct host interface. Check scanner host parameters or edit options. Interface cable is loose. Ensure all cable connections are secure. Cradle has lost connection to host. In this exact order: disconnect power supply; disconnect host cable; wait three seconds; reconnect host cable; reconnect power supply; reestablish pairing. Five long low beeps sound after a bar code is decoded A conversion error or format error has been detected. Ensure the scanner’s conversion parameters are properly configured. Scanned data is incorrectly displayed on the host. Cradle host communication parameters do not match host’s parameters. Ensure proper host is selected. Bar code is decoded, but data is not transmitted to the host. For RS-232, ensure the cradle’s communication parameters match the host’s settings. For a Keyboard Wedge configuration, ensure the system is programmed for the correct keyboard type, and the CAPS LOCK key is off. Ensure editing options (e.g., UPC-E to UPC-A conversion) are properly programmed. Scanner emits short high-short high-short high-long low beep sequence when it is not in use. RS-232 receive error. Normal during host reset. Otherwise, ensure the scanner’s RS-232 parity setting matches the host setting. Scanner emits long low-long high beep sequence during programming. Input error or Cancel bar code was scanned. Ensure the correct numeric bar codes, that are within range for the parameter being programmed, are being scanned. 3-4 Symbol LS3578 Product Reference Guide Table 3-1 Troubleshooting (Continued) Problem Possible Causes Possible Solutions Scanner emits short low-short high- short low-short high beep sequence while it is being programmed. Out of ADF parameter storage space. Erase all rules and re-program with shorter rules. Out of Synapse parameter storage space. Scan Set Synapse Defaults code, from the appropriate Synapse Interface Guide, for cables no longer in use and re-program the scanner for the current host interface. Scanner emits one short high beep when it is not in use. In RS-232 mode, a character is received and Beep on option is enabled. Normal when Beep on is enabled and the scanner is in RS-232 mode. Cradle does not work after following installation procedures. Cradle is not receiving power. Check system power. Cable connections are not secure. Reinsert cables properly. The scanner is not inserted properly in the cradle. Reinsert scanner. Cradle is not properly connected to the host. Check that host settings are correct, and connect the cradle to the appropriate port on the host. Cradle is outside the charging temperature range. Charge within the recommended temperature of 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal. Battery does not charge. NOTE If problems still occur, contact the distributor or Motorola Enterprise Mobility Support. See page xv for contact information. Maintenance and Technical Specifications Technical Specifications Table 3-2 Technical Specifications - Scanner Description Item Symbol LS3578-FZ Symbol LS3578-ER Battery Rechargeable Lithium-Ion 2200 mAh (3.7V) Decode Capability UPC/EAN, Bookland EAN, UPC/EAN with supplementals, Code 128, UCC/EAN 128, ISBT 128, Code 39, Trioptic Code 39, Code 93, Code 11, Interleaved 2 of 5, Discrete 2 of 5, Codabar (NW-7), MSI, GS1 DataBar. Beeper Operation User-selectable: Enable, Disable Beeper Volume User-selectable: Three levels Beeper Tone User-selectable: Three tones Scan Repetition Rate 36 scans/second Yaw Tolerance ± 50° from nominal ± 60° from nominal Pitch Tolerance ± 65° from nominal ± 65° from nominal Roll Tolerance ± 20° from nominal ± 10° from nominal Print Contrast Minimum 25% minimum reflectance differential, measured at 650 nm. Ambient Light Immunity Indoor: Outdoor: 450 Ft Candles (4,842 Lux) 8,000 Ft Candles (86,080 Lux) 450 Ft Candles (4,842 Lux) 4,000 Ft Candles (43,040 Lux) Durability 6.5 ft (2.0 m) drops to concrete; 5 ft (1.5 m) at -4° F (-20° C) Operating Temperature -4° to 122° F (-20° to 50° C) Storage Temperature -40° to 158° F (-40° to 70° C) Charging Temperature 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal Humidity 5% to 95% (non-condensing) ESD 15 kV air discharge 8 kV contact discharge Weight 14.6 oz (414 grams) Dimensions: Height Width Depth 7.34 in. (18.65 cm) 4.82 in. (12.25 cm) 2.93 in. (7.43 cm) Laser 650nm laser diode Laser Classifications IEC 825-1 Class 2 Minimum Element Width 5 mil (0.127 mm) 14.8 oz (420 grams) 7.5 mil (0.191 mm) 3-5 3-6 Symbol LS3578 Product Reference Guide Table 3-2 Technical Specifications - Scanner (Continued) Description Item Symbol LS3578-FZ Symbol LS3578-ER Interfaces Supported Keyboard Wedge, RS-232, USB, IBM 468X/469X, Synapse, 123Scan Radio Bluetooth, Class 2, Version 1.2, Serial Port & HID Profiles 2.402 to 2.480 GHz Adaptive Frequency Hopping (co-existence with 802.11 wireless networks) Data rate: 720 kbps Electrical Safety Certified Pending to UL1950, CSA C22.2 No.950. EN60950/IC950 Input Transient Protection IEC 1000-4-(2,3,4,5,6,11) EMI FCC Part 15 Class B, ICES-003 Class B European Union EMC Directive, Australian SMA, Taiwan EMC, Japan VCCI/MITI/Dentori Table 3-3 Technical Specifications - Cradles Description Item STB3508 and FLB3508 Power Requirements STB3578 and FLB3578 4.75 - 14.0 VDC Typical Current Draw Not Charging: 35 mA @ 5V 45 mA @ 9V 80 mA @ 5V 85 mA @ 9V Fast Rate Charge: 850 mA @ 5V 610 mA @ 9V 920 mA @ 5V 655 mA @ 9V Slow Rate Charge: 400 mA @ 5V 275 mA @ 9V 440 mA @ 5V 310 mA @ 9V Interfaces Supported None Keyboard Wedge, RS-232, USB, IBM 468X/469X, Synapse Operating Temperature -4° to 122° F (-20° to 50° C) Storage Temperature -40° to 158° F (-40° to 70° C) Charging Temperature 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal Humidity 5% to 95% (non-condensing) ESD 15 kV air discharge 8 kV contact discharge Weight 10.5 oz (298 grams) Maintenance and Technical Specifications Table 3-3 Technical Specifications - Cradles (Continued) Description Item STB3508 and FLB3508 STB3578 and FLB3578 Dimensions: Height Width Depth 9.5 in. (24.1 cm) 4.0 in (10.2 cm) 2.9 in (7.4 cm) Radio N/A Electrical Safety Certified Pending to UL1950, CSA C22.2 No.950. EN60950/IC950 Input Transient Protection IEC 1000-4-(2,3,4,5,6,11) EMI FCC Part 15 Class B, ICES-003 Class B European Union EMC Directive, Australian SMA, Taiwan EMC, Japan VCCI/MITI/Dentori Bluetooth, Class 2, Version 1.2, Serial Port & HID Profiles 2.402 to 2.480 GHz Adaptive Frequency Hopping (co-existence with 802.11 wireless networks) Data rate: 720 kbps Scanner Signal Descriptions The signal descriptions in Table 3-4 apply to the 10-pin RJ connector on the cradle and are for reference only. Table 3-4 Cradle to Host Pin-outs Pin IBM Synapse RS-232 Keyboard Wedge USB 1 Reserved SynClock Reserved Reserved Jump to Pin 6 2 Power Power Power Power Power 3 Ground Ground Ground Ground Ground 4 IBM_A(+) Reserved TxD KeyClock Reserved 5 Reserved Reserved RxD TermData D+ 6 IBM_B(-) SynData RTS KeyData Jump to Pin 1 7 Reserved Reserved CTS TermClock D- 8 Reserved Reserved Reserved Reserved Reserved 9 Reserved Reserved Reserved Reserved Reserved 10 Reserved Reserved Reserved Reserved Reserved 3-7 3-8 Symbol LS3578 Product Reference Guide Figure 3-1 illustrates the positions of the cradle pins. Pin 4 Pin 3 Pin 2 Pin 1 Figure 3-1 Cradle Pin Assignments The signal descriptions in Table 3-5 apply to the connector from the scanner to the cradle and are for reference only. Table 3-5 Scanner to Cradle Pin-outs Pin Signal 1 VCC 2 CRADLE_TXD 3 CRADLE_RXD 4 GND Chapter 4 Radio Communications Introduction This chapter provides information about the modes of operation and features available for wireless communication between scanners, cradles and hosts. The chapter also includes the parameters necessary to configure the scanner. The scanner ships with the settings shown in the Table 4-1 on page 4-2 (also see Appendix A, Standard Default Parameters for all host device and miscellaneous scanner defaults). If the default values suit requirements, programming is not necessary. To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile memory and are preserved even when the scanner is powered down. If not using a Synapse or USB cable with the cradle, select a host type (see each host chapter for specific host information) after the power-up beeps sound. This is only necessary upon the first power-up when connected to a new host. To return all features to default values, scan a bar code in Default Parameters on page 5-4. Throughout the programming bar code menus, default values are indicated with asterisks (*). * Indicates Default *Disable Pair on Contacts Feature/Option Scanning Sequence Examples In most cases, scan one bar code to set a specific parameter value. Errors While Scanning Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter. 4-2 Symbol LS3578 Product Reference Guide Radio Communications Parameter Defaults Table 4-1 lists the defaults for radio communication parameters. If you wish to change any option, scan the appropriate bar code(s) provided in this chapter. NOTE Table 4-1 See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and miscellaneous default parameters. Radio Communication Default Table Parameter Default Page Number Bluetooth Host (Host Type) Cradle Host 4-5 Bluetooth Friendly Name Scanner name and serial number 4-7 Discoverable Mode General 4-7 Country Keyboard Types (Country Code) North American 4-9 HID Keyboard Keystroke Delay No Delay (0 msec) 4-11 CAPS Lock Override Disable 4-11 Ignore Unknown Characters Enable 4-12 Emulate Keypad Disable 4-12 Keyboard FN1 Substitution Disable 4-13 Function Key Mapping Disable 4-13 Simulated Caps Lock Disable 4-14 Convert Case No Case Conversion 4-14 Beep on Reconnect Attempt Disable 4-15 Reconnect Attempt Interval 30 sec 4-16 Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode On Bar Code Data 4-18 Modes of Operation (Point-to-Point/Multipoint-to-Point) Point-to-Point 4-20 Parameter Broadcast (Cradle Host Only) Enable 4-21 Pairing Modes Unlocked 4-22 Pairing on Contacts Disable 4-23 Connection Maintenance Interval 15 min 4-24 Radio Communications Table 4-1 Radio Communication Default Table (Continued) Parameter Default Page Number Authentication Disable 4-27 Variable Pin Code Static 4-28 Encryption Disable 4-29 Wireless Beeper Definitions When the scanner scans the pairing bar code it issues various beep sequences indicating successful or unsuccessful operations. See Table 4-2 for beep sequences that occur during pairing operations. Table 4-2 Wireless Beeper Definitions Beeper Sequence Indication Short low-high beeps Scanner has paired with the cradle. Short high-low beeps Scanner has unpaired with the cradle. Note: When connected to a remote device using SPP or HID, if a disconnect beep sequence sounds immediately after scanning a bar code, check the host device to determine if it received the transmitted data. The scanner may have transmitted the last bar code scanned after losing the connection. Long low-long high beeps Unsuccessful pairing attempt. See Auto-reconnect Feature on page 4-15. Long low-long high-long low-long high beeps Remote device rejected connection attempt, possibly due to an attempt to pair with a cradle that is already paired with the maximum number of scanners. Four long low beeps 1. A transmission error was detected in a scanned symbol. The data is ignored. This occurs if a unit is not properly configured. Check option setting. 2. When communicating with a cradle, the cradle acknowledges receipt of data. If the acknowledgment is not received, this transmission error beep sequence sounds. Data may still have been received by the host. Check the host system for receipt of transmitted data. If data was not received by the host, re-scan the bar code. Five high beeps Emitted every 5 seconds while a reconnection attempt is in progress. See Auto-reconnect Feature on page 4-15. 4-3 4-4 Symbol LS3578 Product Reference Guide Radio Communications Host Types To set up the scanner for communication with a cradle, or to use standard Bluetooth profiles, scan the appropriate host type bar code below. • Cradle Host (default) - Select this host type for scanner(s) to cradle operation. The scanner must then be paired to the cradle and the cradle communicates directly to the host via the host interface cable connection. • Serial Port Profile (Master) - Select this host type for Bluetooth Technology Profile Support (see page 4-6). The scanner connects to the PC/host via Bluetooth and behaves like there’s a serial connection. The scanner initiates the connection to the remote device and is the Master. Scan Serial Port Profile (Master), then scan the PAIR bar code for the remote device. See Pairing Bar Code Format on page 4-24 for information about creating a pairing bar code for a remote device. • Serial Port Profile (Slave) - Select this host type for Bluetooth Technology Profile Support (see page 4-6). The scanner connects to the PC/host via Bluetooth and behaves like there’s a serial connection. The scanner accepts incoming connection requested from a remote device and is the Slave. Scan Serial Port Profile (Slave) and wait for the incoming connection. • Bluetooth Keyboard Emulation (HID Slave) - Select this host type for Bluetooth Technology Profile Support. (See page 4-6 for Bluetooth Technology Profile Support and Master/Slave definitions.) The scanner connects to the PC/host via Bluetooth and behaves like a keyboard. The scanner accepts incoming connection requested from a remote device and is the slave. Scan Bluetooth Keyboard Emulation (HID Slave) and wait for the incoming connection. NOTE 1.The scanner supports keyboard emulation over the Bluetooth HID profile. For detailed information, and HID host parameters, see HID Host Parameters on page 4-8. 2. When the scanner is paired to the cradle in SPP Master or Cradle Host mode, the scanner automatically tries to reconnect to a remote device when a disconnection occurs that is due to the radio losing communication. For more information see Auto-reconnect Feature on page 4-15. Radio Communications Radio Communications Host Types (continued) *Cradle Host Serial Port Profile (Master) Serial Port Profile (Slave) Bluetooth Keyboard Emulation (HID Slave) 4-5 4-6 Symbol LS3578 Product Reference Guide Bluetooth Technology Profile Support With Bluetooth Technology Profile Support, the cradle is not required for wireless communication. The scanner communicates directly to the host using Bluetooth technology. The scanner supports the standard Bluetooth Serial Port Profile (SPP) and HID Profiles which enable the scanner to communicate with other Bluetooth devices that support these profiles. • SPP - the scanner connects to the PC/host via Bluetooth and performs like there’s a serial connection. • HID - the scanner connects to the PC/host via Bluetooth and performs like a keyboard. Master/Slave Set Up The scanner can be set up as a Master or Slave. When the scanner is set up as a Slave, it is discoverable and connectable to other devices. When the scanner is set up as a Master, the Bluetooth address of the remote device to which a connection is requested is required. A pairing bar code with the remote device address must be created and scanned to attempt a connection to the remote device. See the Pairing Bar Code Format on page 4-24 for information about creating a pairing bar code. Master When the scanner is set up as a Master (SPP), it initiates the radio connection to a slave device. Initiating the connection is done by scanning a pairing bar code for the remote device (see Pairing Bar Code Format on page 4-24). Slave When the scanner is set up as a Slave device (SPP or HID), the scanner accepts an incoming connection request from a remote device. NOTE The number of scanners is dependent on the host’s capability. Radio Communications 4-7 Bluetooth Friendly Name You can set a meaningful name for the scanner that appears in the application during device discovery. The default name is the scanner name followed by its serial number, e.g., LS3578 123456789ABCDEF. Scanning Set Defaults reverts the scanner to this name; use custom defaults to maintain the user-programmed name through a Set Defaults operation. To set a new Bluetooth Friendly Name, scan the following bar code, then scan up to 23 characters from Appendix E, Alphanumeric Bar Codes. If the name contains less than 23 characters, scan End of Message on page E-7 after entering the name. NOTE If your application allows you to set a device name, this takes precedence over the Bluetooth Friendly Name. Bluetooth Friendly Name Discoverable Mode Select a discoverable mode based on the device initiating discovery: • Select General Discoverable Mode when initiating connection from a PC. • Select Limited Discoverable Mode when initiating connection from a mobile device (e.g., Motorola Q), and the device does not appear in General Discoverable Mode. Note that it can take longer to discover the device in this mode. The device remains in Limited Discoverable Mode for 30 seconds, and green LEDs flash while in this mode. It is then non-discoverable. To re-active Limited Discoverable Mode, press the trigger. *General Discoverable Mode Limited Discoverable Mode 4-8 Symbol LS3578 Product Reference Guide HID Host Parameters The scanner supports keyboard emulation over the Bluetooth HID profile. In this mode the scanner can interact with Bluetooth enabled hosts supporting the HID profile as a Bluetooth keyboard. Scanned data is transmitted to the host as keystrokes. Following are the keyboard parameters supported by the HID host. Radio Communications HID Country Keyboard Types (Country Codes) Scan the bar code corresponding to the keyboard type. *North American Standard Keyboards French Windows German Windows French Canadian Windows 98 Spanish Windows Italian Windows 4-9 4 - 10 Symbol LS3578 Product Reference Guide HID Country Keyboard Types (Country Codes - continued) Swedish Windows UK English Windows Japanese Windows French Canadian Windows 2000/XP Portuguese/Brazilian Windows Radio Communications 4 - 11 HID Keyboard Keystroke Delay This parameter sets the delay, in milliseconds, between emulated keystrokes. Scan a bar code below to increase the delay when the HID host requires a slower transmission of data. *No Delay (0 msec) Medium Delay (20 msec) Long Delay (40 msec) HID CAPS Lock Override When enabled, the case of the data is preserved regardless of the state of the caps lock key. This setting is always enabled for the “Japanese, Windows (ASCII)” keyboard type and can not be disabled. *Do Not Override Caps Lock Key (Disable) Override Caps Lock Key (Enable) 4 - 12 Symbol LS3578 Product Reference Guide HID Ignore Unknown Characters Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown Characters is scanned, all bar code data is sent except for unknown characters, and no error beeps sound. When Do Not Send Bar Codes With Unknown Characters is scanned, bar codes containing at least one unknown character are not sent to the host, and an error beep sounds. *Send Bar Codes With Unknown Characters (Enable) Do Not Send Bar Codes With Unknown Characters (Disable) Emulate Keypad When enabled, all characters are sent as ASCII sequences over the numeric keypad. For example, ASCII A is sent as "ALT make" 0 6 5 "ALT Break." *Disable Keypad Emulation Enable Keypad Emulation Radio Communications 4 - 13 HID Keyboard FN1 Substitution When enabled, this parameter allows replacement of any FN1 character in an EAN128 bar code with a Key Category and value chosen by the user. See FN1 Substitution Values on page 5-15 to set the Key Category and Key Value. *Disable Keyboard FN1 Substitution Enable Keyboard FN1 Substitution HID Function Key Mapping ASCII values under 32 are normally sent as control-key sequences. When this parameter is enabled, the keys in bold are sent in place of the standard key mapping (see Table 8-2 on page 8-13). Table entries that do not have a bold entry remain the same whether or not this parameter is enabled. *Disable Function Key Mapping Enable Function Key Mapping 4 - 14 Symbol LS3578 Product Reference Guide Simulated Caps Lock When enabled, the scanner inverts upper and lower case characters on the scanner bar code as if the Caps Lock state is enabled on the keyboard. This inversion is done regardless of the current state of the keyboard Caps Lock state. *Disable Simulated Caps Lock Enable Simulated Caps Lock Convert Case When enabled, the scanner converts all bar code data to the selected case. *No Case Conversion Convert All to Upper Case Convert All to LowerCase Radio Communications 4 - 15 Auto-reconnect Feature When in SPP Master or Cradle Host mode, the scanner automatically tries to reconnect to a remote device when a disconnection occurs that is due to the radio losing communication. This can happen if the scanner goes out of range with the remote device, or if the remote device powers down. The scanner tries to reconnect for the period of time specified by the Reconnect Attempt Interval setting. During that time the green LED continues to blink. If the auto-reconnect process fails due to page timeouts, the scanner sounds a page timeout beep (long low/long high) and enters low power mode. The auto-reconnect process can be re-started by pulling the scanner trigger. If the auto-reconnect process fails because the remote device rejects the connection attempt, the scanner sounds a connection reject beep sequence (see Wireless Beeper Definitions on page 4-3) and deletes the remote pairing address. If this happens, a pairing bar code must be scanned to attempt a new connection to the remote device. NOTE If a bar code is scanned while the auto-reconnect sequence is in process, a transmission error beep sequence sounds and the data is not transmitted to the host. After a connection is reestablished, normal scanning operation returns. For error beep sequence definitions, see Beeper Definitions on page 2-1. The scanner has memory available for storing a remote Bluetooth address for each Master mode (SPP, Cradle). When switching between these modes, the scanner automatically tries to reconnect to the last device it was connected to in that mode. NOTE Switching between Bluetooth host types by scanning a host type bar code (page 4-4) causes the radio to be reset. Scanning is disabled during this time. It takes several seconds for the scanner to re-initialize the radio at which time scanning is enabled. Reconnect Attempt Beep Feedback When a scanner disconnects as it goes out of range, it immediately attempts to reconnect. While the scanner attempts to reconnect, the green LED continues to blink. If the auto-reconnect process fails, the scanner emits a page timeout beep (long low/long high) and stops blinking the LED. The process can be restarted by pulling the trigger. The Beep on Reconnect Attempt feature is disabled by default. When enabled, the scanner emits 5 short high beeps every 5 seconds while the reconnection attempt is in progress. Scan a bar code below to enable or disable Beep on Reconnect Attempt. *Disable Beep on Reconnect Attempt Enable Beep on Reconnect Attempt 4 - 16 Symbol LS3578 Product Reference Guide Reconnect Attempt Interval When a scanner disconnects as it goes out of range, it immediately attempts to reconnect for the default time interval of 30 seconds. This time interval can be changed to one of the following options: • 30 seconds • 1 minute • 5 minutes • 30 minutes • 1 hour • Indefinitely. To set the Reconnect Attempt Interval, scan one of the bar codes below *Attempt to Reconnect for 30 Seconds Attempt to Reconnect for 1 Minute Attempt to Reconnect for 5 Minutes Attempt to Reconnect for 30 Minutes Radio Communications 4 - 17 Reconnect Attempt Interval (continued) Attempt to Reconnect for 1 Hour Attempt to Reconnect Indefinitely 4 - 18 Symbol LS3578 Product Reference Guide Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode In Bluetooth Keyboard Emulation (HID Slave) mode, select a re-connect option for when the scanner loses its connection with a remote device: • Auto-reconnect on Bar Code Data: The scanner auto-reconnects when you scan a bar code. With this option, a delay can occur when transmitting the first characters. The scanner sounds a decode beep upon bar code scan, followed by a connection, a page timeout, a rejection beep, or a transmission error beep. Select this option to optimize battery life on the scanner and mobile device. Note that auto-reconnect does not occur on rejection and cable unplug commands. • Auto-reconnect Immediately: When the scanner loses connection, it attempts to reconnect. If a page timeout occurs, the scanner attempts reconnect on a trigger pull. Select this option if the scanner’s battery life is not an issue and you do not want a delay to occur when the first bar code is transmitted. Note that auto-reconnect does not occur on rejection and cable unplug commands. • Disable Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode: When the scanner loses connection, you must re-establish it manually. *Auto-reconnect on Bar Code Data Auto-reconnect Immediately Disable Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode Radio Communications 4 - 19 Out of Range Indicator An out of range indicator can be set by scanning Enable Beep on Reconnect Attempt on page 4-15 and extending the time using the Reconnect Attempt Interval on page 4-16. For example, with Beep on Reconnect Attempt disabled while the scanner loses radio connection when it is taken out of range, the scanner attempts to reconnect silently during the time interval set by scanning a Reconnect Attempt Interval. When Beep on Reconnect Attempt is enabled, the scanner emits 5 high beeps every 5 seconds while the reconnection attempt is in progress. If the Reconnect Attempt Interval is adjusted to a longer period of time, such as 30 minutes, the scanner emits 5 high beeps every 5 seconds for 30 minutes providing an out of range indicator. 4 - 20 Symbol LS3578 Product Reference Guide Scanner(s) To Cradle Support Modes of Operation The charging cradle with radio supports two radio communication modes of operation, allowing the scanner to communicate wirelessly: • Point-to-Point • Multipoint-to-Point. Point-to-Point Communication In Point-to-Point communication mode, the cradle allows one scanner to connect to it at a time. In this mode, the scanner is paired to the cradle either by insertion into the cradle (if pairing on contacts is enabled, page 4-23), or by scanning the PAIR bar code on the cradle. Communication can be locked, unlocked (default), or in a lock override state (see Pairing Modes on page 4-22). In locked mode, locking intervals must be set by scanning a connection maintenance interval bar code beginning on page 4-24. To activate this mode of operation, scan Point-to-Point. Multipoint-to-Point Communication In Multipoint-to-Point communication mode, up to three scanners can be paired to one cradle. To activate this mode, the first scanner connected to the cradle must scan the Multipoint-to-Point bar code. This mode allows a parameter broadcast (page 4-21) that clones all scanners paired to the cradle so only one scanner needs to be programmed. To select Point-to-Point or Multipoint-to-Point mode, scan the appropriate bar code. Multipoint-to-Point Mode *Point-to-Point Mode Radio Communications 4 - 21 Parameter Broadcast (Cradle Host Only) When in multipoint-to-point mode, enable Parameter Broadcast to broadcast all parameter bar codes scanned to all other scanners in the piconet. If disabled, parameter bar codes are processed by the individual scanner only, and the scanner ignores parameters broadcast from other scanners or from the cradle. *Enable Parameter Broadcast Disable Parameter Broadcast Pairing Pairing is the process by which a scanner initiates communication with a cradle. Scanning Multipoint-to-Point activates multi scanner-to-cradle operation and allows up to three scanners to pair to one cradle. The cradle includes a pairing bar code. To pair the scanner with the cradle, scan the pairing bar code on the cradle. A high/low/high/low beep sequence indicates that the pairing bar code was decoded. When a connection between the cradle and scanner is established, a low/high beep sounds. NOTE 1. The pairing bar code that connects the scanner to a cradle is unique to each cradle. 2. Do not scan data or parameters until pairing completes. 3. When the scanner is paired to the cradle in SPP Master or Cradle Host mode, the scanner automatically tries to reconnect to a remote device when a disconnection occurs that is due to the radio losing communication. For more information see Auto-reconnect Feature on page 4-15. 4 - 22 Symbol LS3578 Product Reference Guide Pairing Modes When operating with the cradle, two modes of pairing are supported: • Locked Pairing Mode - When a cradle is paired (connected) to the scanner (or to three scanners in Multipoint-to-Point mode), any attempt to connect a different scanner, by either scanning the PAIR bar code on the cradle or by inserting it into the cradle with the pairing on contacts feature enabled (page 4-23), is rejected. The currently connected scanner(s) maintain connection. In this mode, you must set a Connection Maintenance Interval on page 4-24. • Unlocked Pairing Mode - Pair (connect) a new scanner to a cradle at any time by either scanning the PAIR bar code on the cradle or by inserting it into the cradle with the pairing on contacts feature enabled. This unpairs the previous scanner from the cradle. NOTE In Multipoint-to-Point mode, pairing a 4th scanner while in Unlocked mode replaces any disconnected (out of range) scanner. However, if three scanners are actively connected to the cradle, a 4th scanner cannot connect regardless of the pairing mode. To set the cradle pairing mode, scan the appropriate bar code below. *Unlocked Pairing Mode Locked Pairing Mode Lock Override Lock Override overrides a locked scanner base pairing and connects a new scanner. In Multipoint-to-Point mode, this unpairs any disconnected (out of range) scanner first, in order to connect the new scanner. To use Lock Override, scan the bar code below, followed by the pairing bar code on the cradle. LockOverride Radio Communications 4 - 23 Pairing Methods There are two pairing methods. The default method allows the scanner and cradle to pair (connect) when the pairing bar code on the cradle is scanned. A second method pairs the scanner and cradle when the scanner is inserted in the cradle. To enable this feature, scan Enable Pair On Contacts below. With this feature enabled it is not necessary to scan the pairing bar code on the cradle. If the pairing is successful, a low/high connection beep sequence sounds a few seconds after the scanner is placed in the cradle. See Wireless Beeper Definitions on page 4-3 for other beep sequences. To enable or disable pairing on contacts, scan the appropriate bar code below. Enable Pair On Contacts *Disable Pair on Contacts Unpairing Unpair the scanner from the cradle or PC/host to make the cradle available for pairing with another scanner. Scan the bar code below to disconnect the scanner from its cradle/PC host. An unpairing bar code is also included in the Symbol LS3578 Quick Start Guide. Unpairing 4 - 24 Symbol LS3578 Product Reference Guide Pairing Bar Code Format When the scanner is configured as an SPP Master, you must create a pairing bar code for the remote Bluetooth device to which the scanner can connect. You must know the Bluetooth address of the remote device. Pairing bar codes are Code 128 bar codes and are formatted as follows: Bxxxxxxxxxxxx where: • B (or LNKB) is the prefix • xxxxxxxxxxxx represents the 12-character Bluetooth address. Pairing Bar Code Example If the remote device to which the scanner can connect has a Bluetooth address of 11:22:33:44:55:66, then the pairing bar code is: Paring Bar Code Content: ‘B’ or ‘LNKB’ + Bluetooth Address B112233445566 Connection Maintenance Interval NOTE The Connection Maintenance Interval only applies in locked pairing mode (see page 4-22). When a scanner disconnects from a cradle due to a Link Supervision Timeout, the scanner immediately attempts to reconnect to the cradle for 30 seconds. If the auto-reconnect process fails, it can be restarted by pulling the scanner trigger. To guarantee that a disconnected scanner can reconnect when it comes back in range, the cradle reserves the connection for that scanner for a period of time defined by the Connection Maintenance Interval. If the cradle is supporting the maximum three scanners and one scanner disconnects, a fourth scanner cannot pair to the cradle during this interval. To connect another scanner, either wait until the connection maintenance interval expires then scan the PAIR bar code on the cradle with the new scanner; or scan Lock Override (page 4-22) with the new scanner then scan the PAIR bar code on the cradle. NOTE When the cradle supports the maximum three scanners, it stores the remote pairing address of each scanner in memory regardless of the scanner condition (e.g., discharged battery). When you want to change the scanners paired to the cradle, unpair each scanner currently connected to the cradle by scanning the Unpairing bar code prior and reconnect each appropriate scanner by scanning the PAIR bar code on the cradle. Connection Maintenance Interval options are: • 15 minutes • 30 minutes • One hour • Two hours • Four hours • Eight hours Radio Communications 4 - 25 • 24 hours • Indefinitely. Considerations The system administrator determines the Connection Maintenance Interval. A shorter interval allows new users to gain access to abandoned connections more quickly, but causes problems if users leave the work area for extended periods. A longer interval allows existing users to leave the work area for longer periods of time, but ties up the system for new users. To avoid this conflict, users who are going off-shift can scan the unpair bar code on page 4-23 to ignore the Connection Maintenance Interval and make the connection immediately available. To set the Connection Maintenance Interval, scan one of the bar codes below. *Set Interval to 15 Minutes Set Interval to 30 Minutes Set Interval to 60 Minutes Set Interval to 2 Hours 4 - 26 Symbol LS3578 Product Reference Guide Connection Maintenance Interval (continued) Set Interval to 4 Hours Set Interval to 8 Hours Set Interval to 24 Hours Set Interval to Forever Radio Communications 4 - 27 Bluetooth Security The scanner supports Bluetooth Authentication and Encryption. Authentication can be requested by either the remote device or the scanner. When Authentication is requested, the scanner uses its programmed PIN code to generate a link key. The scanner stores this link key upon pairing, so you do not have to re-enter the PIN code when moving in and out of range, switching profiles, or switching between devices (e.g., between the cradle and the application). Once Authentication is complete, either device may then negotiate to enable Encryption. NOTE A remote device can still request Authentication. Authentication To force Authentication with a remote device (including the cradle), scan the Enable Authentication bar code below. To prevent the scanner from forcing Authentication, scan the Disable Authentication bar code below. Enable Authentication *Disable Authentication 4 - 28 Symbol LS3578 Product Reference Guide PIN Code To set the PIN code (e.g., password) on the scanner, scan the bar code below followed by five alphanumeric programming bar codes from Appendix E, Alphanumeric Bar Codes. The default PIN code is 12345. If the scanner communicates with a cradle with security enabled, synchronize the PIN codes on the scanner and cradle. To achieve this, connect the scanner to the cradle when setting the PIN codes. If the scanner is not connected to a cradle, the PIN code change only takes effect on the scanner. If security is required between the scanner and cradle, and the PIN codes do not match, pairing fails. If the PIN codes are not synchronized, re-synchronize them by disabling security, establishing a connection to the cradle, and then programming a new PIN code. Set PIN Code Variable PIN Code The default PIN code is the user-programmed Static PIN Code. Typically, however, HID connections require entering a Variable PIN Code. If, when attempting connection, the application presents a text box that includes a PIN, scan the Variable PIN Code bar code, then re-attempt connection. When you hear a beep indicating the scanner is waiting for an alphanumeric entry, enter the provided variable PIN using the Alphanumeric Keyboard on page E-1, then scan End of Message on page E-7 if the code is less than 16 characters. The scanner discards the variable PIN code after connection. *Static PIN Code Variable PIN Code Radio Communications 4 - 29 Encryption NOTE Authentication must be performed before Encryption can take effect. To set up the scanner for enabling Encryption, scan Enable Encryption. To prevent the scanner from enabling Encryption, scan Disable Encryption. When enabled, the radio encrypts data. Enable Encryption * Disable Encryption 4 - 30 Symbol LS3578 Product Reference Guide Chapter 5 User Preferences Introduction This chapter describes each user preference feature and provides the programming bar codes for selecting these features for the scanner. The scanner ships with the settings shown in the User Preferences Default Table on page 5-2 (also see Appendix A, Standard Default Parameters for all host device and miscellaneous scanner defaults). If the default values suit the requirements, programming is not necessary. Set feature values by scanning single bar codes or short bar code sequences. The settings are stored in non-volatile memory and are preserved when the scanner powers down. The scanner communicates with the host through the cradle. During scanner setup, the scanner is paired with a cradle, which is connected to the host through one of several interfaces (see Pairing on page 1-10 and the applicable host interface chapter). Each cradle can pair with up to four scanners. If not using a Synapse or USB cable, select the host type (see the specific host chapter) after the scanner emits power-up beeps. This is only done upon the first power-up when connecting to a new host. NOTE Disconnect the power supply before changing host cables or the scanner may not recognize the new host. To return all features to their default values, scan a Default Parameters bar code on page 5-4. Throughout the programming bar code menus, default values are indicated with asterisks (*). * Indicates Default *High Frequency Feature/Option 5-2 Symbol LS3578 Product Reference Guide Scanning Sequence Examples In most cases, scan only one bar code to set a parameter value. For example, to set the beeper tone to high, scan the High Frequency (beeper tone) bar code under Beeper Tone on page 5-5. The scanner issues a fast warble beep and the LED turns green, indicating a successful parameter entry. Other parameters, such as Laser On Time or Data Transmission Formats, require scanning several bar codes. See the parameter description for this procedure. Errors While Scanning Unless otherwise specified, if an error is made during a scanning sequence, re-scan the correct parameter. User Preferences Default Parameters Table 5-1 lists the defaults for user preference parameters. To change any option, scan the appropriate bar code(s) provided in User Preferences on page 5-4. NOTE Table 5-1 See Appendix A, Standard Default Parameters for all user preference, host, symbology, and miscellaneous default parameters.. User Preferences Default Table Parameter Default Page Number User Preferences Default Parameters Restore Defaults 5-4 Beeper Tone Medium 5-5 Beeper Volume High 5-6 Laser On Time 3.0 sec 5-7 Beep After Good Decode Enable 5-7 Trigger Mode Level 5-8 Aim Duration 0.0 sec 5-9 Beep on Insertion Enable 5-9 Time Delay to Reduced Power Mode 1 Second 5-10 Transmit Code ID Character None 5-11 Scan Angle Normal Angle 5-11 Prefix Value 7013 5-12 Suffix Value 7013 5-12 User Preferences Table 5-1 User Preferences Default Table (Continued) Parameter Default Page Number Scan Data Transmission Format Data As Is 5-13 FN1 Substitution Values Set FN1 Substitution Value 5-15 Transmit “No Read” Message Disable No Read 5-15 Synapse Interface Standard Synapse Connection 5-16 Batch Mode Normal (Do Not Batch Data) 5-17 Report Scaner Version 5-19 Report Scan Engine Version 5-19 Report MIMIC Version 5-19 Report Synapse Cable 5-19 5-3 5-4 Symbol LS3578 Product Reference Guide User Preferences Default Parameters The scanner can be reset to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar code below to reset the scanner to its default settings and/or set the scanner’s current settings as the custom default. • Restore Defaults - Scan this bar code to reset all default parameters as follows: • If you configured custom default values (see Write to Custom Defaults), this sets the custom default values for all parameters. • If you did not configure custom default values, this sets the factory default values for all parameters. (For factory default values, see Table A-1 on page A-1.) • Set Factory Defaults - Scan this bar code to eliminate all custom default values and set the scanner to factory default values. (For factory default values, see Table A-1 on page A-1.) • Write to Custom Defaults - This bar code configures custom default parameters that set unique default values for all parameters. After changing all parameters to the desired default values, scan the Write to Custom Defaults bar code below to configure custom defaults. NOTE Scanning Restore Defaults or Set Factory Defaults unpairs the scanner with the cradle, and you must rescan the pairing bar code. *Restore Defaults Set Factory Defaults Write to Custom Defaults User Preferences 5-5 Beeper Tone To select a decode beep frequency (tone), scan the Low Frequency, Medium Frequency, or High Frequency bar code. Low Frequency *Medium Frequency High Frequency 5-6 Symbol LS3578 Product Reference Guide Beeper Volume To select a beeper volume, scan the Low Volume, Medium Volume, or High Volume bar code. Low Volume Medium Volume *High Volume User Preferences 5-7 Laser On Time This parameter sets the maximum time that decode processing continues during a scan attempt. It is programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default Laser On Time is 3.0 seconds. To set a Laser On Time, scan the bar code below. Next, scan two numeric bar codes from Appendix D, Numeric Bar Codes that correspond to the desired on time. Include a leading zero for single digit numbers. For example, to set a Laser On Time of 0.5 seconds, scan the bar code below, then scan the 0 and 5 bar codes. To correct an error or change the selection, scan Cancel on page D-3. Laser On Time Beep After Good Decode Scan one of the following bar codes to select whether the scanner beeps after a good decode. If Do Not Beep After Good Decode is selected, the beeper still operates during parameter menu scanning and indicates error conditions. *Beep After Good Decode (Enable) Do Not Beep After Good Decode (Disable) 5-8 Symbol LS3578 Product Reference Guide Trigger Mode Scan one of the following bar codes to set the scanner’s trigger mode. Level Trigger Upon trigger pull, an aiming dot appears for a programmable duration of time. After this time, the aiming dot turns into a standard laser scanning beam for a full decode session. The laser scanning beam stays on until the laser-on timeout occurs, a decode occurs, or the trigger is released. If the trigger is released before the aiming duration expires, the laser shuts off and no decode occurs. *Level Two Stage - Option 1 Upon trigger pull, an aiming dot appears. This aiming dot remains while the trigger is pulled. When the trigger is released, the aiming dot turns into a standard laser scanning beam for a full decode session. The laser scanning beam stays on until the laser-on timeout occurs or a decode occurs. If the trigger is pulled again while in a decode session, the scanner beam returns to an aiming dot. Two Stage - Option 1 Two Stage - Option 2 Upon trigger pull, an aiming dot appears. When the trigger is released, the aiming dot turns off. Pulling the trigger twice quickly turns on the standard laser scanning beam for a full decode session. The laser scanning beam stays on until the laser-on timeout occurs, a decode occurs, or the trigger is released. Two Stage - Option 2 User Preferences 5-9 Aim Duration When the scanner is in Level trigger mode (default mode), Aim Duration sets the amount of time the aiming dot appears before turning into a scanning beam. This parameter has no affect when the scanner is in either of the Two Stage trigger modes. See Trigger Mode on page 5-8 for a description of each of the trigger modes. The aim duration is programmable in 0.1 second increments, from 0.0 to 9.9 seconds. The default Aim Duration is 0.0 seconds. When set to 0.0 seconds, no aiming pattern appears before a decode session. To set an aim duration, scan the bar code below. Then scan two numeric bar codes from Appendix D, Numeric Bar Codes that correspond to the desired aim duration. Include a leading zero for durations less than 1.0 seconds. For example, to set an aim duration of 0.5 seconds, scan the bar code below followed by the 0 and the 5 bar codes. To correct an error or change the selection, scan Cancel on page D-3. Aim Duration Beep on Insertion When a scanner is inserted into a cradle and detects power, it emits a short low beep by default. To enable or disable beeping on insertion, scan the appropriate bar code below. *Enable Beep on Insertion Disable Beep on Insertion 5 - 10 Symbol LS3578 Product Reference Guide Time Delay to Reduced Power Mode This parameter sets the time it takes the scanner to enter reduced power mode after any scanning activity. Scan the appropriate bar code below to set the time. *1 second 2 seconds 3 seconds 4 seconds 5 seconds User Preferences 5 - 11 Transmit Code ID Character A Code ID character identifies the code type of a scanned bar code. This is useful when the scanner is decoding more than one code type. Select a Code ID character to insert between the prefix and the decoded symbol. Select no Code ID character, a Symbol Code ID character, or an AIM Code ID character. For Code ID Characters, see Symbol Code Identifiers on page B-1 and AIM Code Identifiers on page B-2. NOTE If you enable Symbol Code ID Character or AIM Code ID Character, and enable Transmit “No Read” Message on page 5-15, the scanner appends the code ID for Code 39 to the NR message. Symbol Code ID Character AIM Code ID Character *None Scan Angle Scan one of the following bar codes to select a scan angle. This affects the length of the laser scanning beam. *Normal Angle Alternate Angle 5 - 12 Symbol LS3578 Product Reference Guide Prefix/Suffix Values To append a prefix or suffix to scan data for use in data editing, scan the appropriate bar code, then scan a four-digit number (i.e., four numeric bar codes) from Appendix D, Numeric Bar Codes that corresponds to key codes for various terminals. For conversion information, see the ASCII Character Set tables in the appropriate host chapter. To correct an error or change the selection, scan Cancel on page D-3. Scan Prefix Scan Suffix User Preferences 5 - 13 Scan Data Transmission Format To change the Scan Data Transmission Format: 1. Scan the Scan Options bar code. 2. Select one of four options: • Data As Is • • • 3. Scan the Enter bar code on page 5-14. To correct a mistake, scan the Data Format Cancel bar code on page 5-14. To program a carriage return/enter after each bar code scanned, scan the following bar codes in order: 1. 2. 3. Enter (on page 5-14) Scan Options *Data As Is 5 - 14 Symbol LS3578 Product Reference Guide Scan Data Transmission Format (continued) Enter Data Format Cancel User Preferences 5 - 15 FN1 Substitution Values The keyboard wedge and USB HID keyboard hosts support a FN1 Substitution feature. Enable this to replace any FN1 character (0x1b) in an EAN128 bar code with a defined value. This value defaults to 7013 (Enter Key). 1. To select a FN1 substitution value, scan the following bar code. Set FN1 Substitution Value 2. Enter the 4-digit FN1 substitution (ASCII) value by scanning each digit in Appendix D, Numeric Bar Codes. See the ASCII Character Set table for the host interface. To correct an error or change the selection, scan CANCEL. To enable FN1 Substitution for keyboard wedge, scan the Enable Keyboard Wedge FN1 Substitution bar code on page 6-11. To enable FN1 Substitution for the USB HID keyboard, scan the Enable USB Keyboard FN1 Substitution bar code on page 8-10. Transmit “No Read” Message Scan one of the following bar codes to select whether or not to transmit a “No Read” message. When enabled, the characters NR transmit when a bar code is not decoded. When disabled, if a symbol does not decode, nothing transmits to the host. NOTE If you enable Transmit No Read, and also enable Symbol Code ID Character or AIM Code ID Character for Transmit Code ID Character on page 5-11, the scanner appends the code ID for Code 39 to the NR message. Enable No Read *Disable No Read 5 - 16 Symbol LS3578 Product Reference Guide Synapse Interface The auto-detection of a Synapse cable varies in duration depending on the type of Synapse connection. If connecting a scanner to another scanner using a Synapse cable, use the Auxiliary Synapse Port connection. Otherwise, when using a Synapse cable, use the default setting. To disconnect and reconnect the scanner from a Synapse cable that is connected to a live host via Synapse, use the “Plug and Play” setting. Do not change this setting from the default if an on-board wedge host is enabled. *Standard Synapse Connection Auxiliary Synapse Port Connection “Plug and Play” Synapse Connection User Preferences 5 - 17 Batch Mode The scanner supports three versions of batch mode. When the scanner is configured for any of the batch modes, it attempts to store bar code data (not parameter bar codes) until transmission is initialized, or the maximum number of bar codes are stored. When a bar code is saved successfully, a good decode beep sounds and the LED flashes green. If the scanner is unable to store a new bar code, a low/high/low/high out of memory beep sounds. (See pages 2-1 and 2-4 for all beeper and LED definitions.) In all modes, calculate the amount of data (number of bar codes) the scanner can store as follows: Number of storable bar codes = 2,000 bytes of memory / (number of characters in the bar code + 3). Modes of Operation • Normal (default) - Do not batch data. The scanner attempts to transmit every scanned bar code. • Out of Range Batch Mode - The scanner starts storing bar code data when it loses its connection to a remote device (for example, when a user holding the scanner walks out of range). Data transmission is triggered by reestablishing the connection with the remote device (for example, when a user holding the scanner walks back into range). • Standard Batch Mode - The scanner starts storing bar code data after Enter Batch Mode is scanned. Data transmission is triggered by scanning Send Batch Data. NOTE Transmission is halted if the connection to the remote device is lost. • Cradle Contact Batch Mode - The scanner starts storing bar code data when Enter Batch Mode is scanned. Data transmission is triggered by insertion of the scanner into the cradle. NOTE If the scanner is removed from the cradle during batch data transfer, transmission halts until the scanner is re-inserted in the cradle. In all modes, transmissions are halted if the scanner is moved out of range. The scanner resumes when it is back in range. If a bar code is scanned while batch data is transmitted it is appended to the end of the batched data; parameter bar codes are not stored. 5 - 18 Symbol LS3578 Product Reference Guide Batch Mode (continued) *Normal Out of Range Batch Mode Standard Batch Mode Cradle Contact Batch Mode Enter Batch Mode Send Batch Data User Preferences 5 - 19 Report Scanner Version Scan the bar code below to report the scanner’s software revision. Report Scanner Software Version Report Scan Engine Version Scan the bar code below to report the scan engine’s software revision. Report Scan Engine Software Version Report MIMIC Version Scan the bar code below to report the MIMIC software revision installed in the cradle’s software. Scanners that do not use MIMIC architecture report nothing. Report MIMIC Software Version Report Synapse Cable Scan the bar code below to report the software revision of the attached Synapse cable. If the scanner does not detect an attached Synapse cable, it reports Synapse not attached. Report Synapse Cable 5 - 20 Symbol LS3578 Product Reference Guide Chapter 6 Keyboard Wedge Interface Introduction This chapter provides instructions for programming the scanner for keyboard wedge host interface, used to connect the scanner between the keyboard and host computer. The scanner translates the bar code data into keystrokes, and transmits the information to the host computer via the cradle interface. The host computer accepts the keystrokes as if they originated from the keyboard. This interface adds bar code reading functionality to a system designed for manual keyboard input. In this mode the keyboard keystrokes are simply passed through. Throughout the programming bar code menus, default values are indicated with asterisks (*). * Indicates Default *North American Feature/Option 6-2 Symbol LS3578 Product Reference Guide Connecting a Keyboard Wedge Interface Male DIN Host Connector Y-cable Keyboard Connector Female DIN Keyboard Connector Figure 6-1 Keyboard Wedge Interface Connection with Y-cable To connect the keyboard wedge interface Y-cable: 1. Turn off the host and unplug the keyboard connector. 2. Attach the modular connector of the Y-cable to the cable interface port on the cradle. See Connecting the Cradle on page 1-4. 3. Connect the round male DIN host connector of the Y-cable to the keyboard port on the host. 4. Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector. 5. If required, connect the power supply to the cradle. 6. Ensure that all connections are secure. 7. Turn on the host system. 8. Pair the scanner to the cradle by scanning the bar code on the cradle. 9. Select the keyboard wedge host type by scanning the appropriate bar code from Keyboard Wedge Host Types on page 6-4. 10. To modify any other parameter options, scan the appropriate bar codes in this chapter. 11. Connect an external power supply if desired. NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 6-1 are examples only. The connectors may be different from those illustrated, but the steps to connect the cradle remain the same. Keyboard Wedge Interface NOTE 6-3 Disconnect the power supply before changing host cables or the scanner may not recognize the new host. Keyboard Wedge Default Parameters Table 6-1 lists the defaults for keyboard wedge host parameters. To change any option, scan the appropriate bar code(s) provided in this chapter. NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and miscellaneous default parameters. Table 6-1 Keyboard Wedge Host Default Table Parameter Default Page Number Keyboard Wedge Host Parameters Keyboard Wedge Host Type IBM PC/AT& IBM PC Compatibles 6-4 Keyboard Wedge Country Types (Country Codes) North American 6-5 Ignore Unknown Characters Enable 6-7 Keystroke Delay 0 msec (No Delay) 6-7 Intra-Keystroke Delay Disable 6-8 Alternate Numeric Keypad Emulation Disable 6-8 Caps Lock On Disable 6-9 Caps Lock Override Disable 6-9 Convert Wedge Data Do Not Convert Wedge Data 6-10 Function Key Mapping Disable 6-10 FN1 Substitution Disable 6-11 Send Make and Break Send Make and Break Scan Codes 6-11 6-4 Symbol LS3578 Product Reference Guide Keyboard Wedge Host Types Keyboard Wedge Host Types Select the keyboard wedge host by scanning one of the following bar codes. *IBM PC/AT & IBM PC Compatibles IBM AT NOTEBOOK NCR 7052 Keyboard Wedge Interface 6-5 Keyboard Wedge Country Types (Country Codes) Scan the bar code corresponding to the keyboard type. If the particular keyboard type is not listed, see Alternate Numeric Keypad Emulation on page 6-8. *North American German Windows French Windows French Canadian Windows 95/98 French Canadian Windows XP/2000 French Belgian Windows 6-6 Symbol LS3578 Product Reference Guide Keyboard Wedge Country Types (Country Codes) (continued) Spanish Windows Italian Windows Swedish Windows UK English Windows Japanese Windows Brazilian-Portuguese Windows Keyboard Wedge Interface 6-7 Ignore Unknown Characters Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown Characters is selected, all bar code data is sent except for unknown characters, and the scanner emits no error beeps. When Do Not Send Bar Codes With Unknown Characters is selected, bar code data is sent until the first unknown character is encountered, and the scanner emits an error beep. *Send Bar Codes with Unknown Characters (Enable) Do Not Send Bar Codes with Unknown Characters (Disable) Keystroke Delay This is the delay in milliseconds between emulated keystrokes. Scan a bar code below to increase the delay when hosts require a slower data transmission. *0 msec (No Delay) 20 msec (Medium Delay) 40 msec (Long Delay) 6-8 Symbol LS3578 Product Reference Guide Intra-Keystroke Delay Enable Intra-Keystroke Delay to insert an additional delay between each emulated key press and release. This also sets the Keystroke Delay parameter to a minimum of 5 msec. Enable Intra-Keystroke Delay *Disable Intra-Keystroke Delay Alternate Numeric Keypad Emulation This allows emulation of most other country keyboard types not listed in Keyboard Wedge Country Types (Country Codes) on page 6-5 in a Microsoft® operating system environment. Enable Alternate Numeric Keypad *Disable Alternate Numeric Keypad Keyboard Wedge Interface 6-9 Caps Lock On When enabled, the scanner emulates keystrokes as if the Caps Lock key is always pressed. Enable Caps Lock On *Disable Caps Lock On Caps Lock Override When enabled, on AT or AT Notebook hosts, the keyboard ignores the state of the Caps Lock key and matches the case (upper or lower) of the sent character. Therefore, an upper case ‘A’ in the bar code is sent as an upper case ‘A,’ and a lower case ‘a’ in the bar code is sent as a lower case ‘a,’ no matter what the state of the keyboard’s Caps Lock key. Enable Caps Lock Override *Disable Caps Lock Override NOTE If both Caps Lock On and Caps Lock Override are enabled, Caps Lock Override takes precedence. 6 - 10 Symbol LS3578 Product Reference Guide Convert Wedge Data When enabled, the scanner converts all bar code data to the selected case. Convert Wedge Data to Upper Case Convert Wedge Data to Lower Case *Do Not Convert Wedge Data Function Key Mapping ASCII values under 32 are normally sent as control key sequences (see Table 6-2 on page 6-14). Enable this parameter to send the keys in bold in place of the standard key mapping. Table entries that do not have a bold entry remain the same regardless of this parameter. Enable Function Key Mapping *Disable Function Key Mapping Keyboard Wedge Interface 6 - 11 FN1 Substitution When enabled, this parameter replaces any FN1 character in an EAN128 bar code with a keystroke chosen by the user. See FN1 Substitution Values on page 5-15. Enable FN1 Substitution *Disable FN1 Substitution Send Make and Break When enabled, the scan codes for releasing a key are not sent. *Send Make and Break Scan Codes Send Make Scan Code Only 6 - 12 Symbol LS3578 Product Reference Guide Keyboard Maps The following keyboard maps are provided for prefix/suffix keystroke parameters. To program the prefix/suffix values, see the bar codes on page 5-12. 7014 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 7008 7009 7010 7007 7006 7001 7011 7012 7003 7002 7004 7005 7013 7015 7017 7016 7018 Figure 6-2 IBM PS2 Type Keyboard 5001 5002 5003 5004 7008 7009 7014 7012 7003 7013 5005 5006 5007 5008 5009 5010 7004 7011 Figure 6-3 IBM PC/AT 5001 5002 1045 5013 5003 5004 5014 5015 5005 5006 1043 5016 5007 5008 5017 5018 5009 5010 7013 5019 5011 1048 5012 (1048 if double key) Figure 6-4 NCR 7052 32-KEY 1046 (7013 if double key) 7002 Keyboard Wedge Interface 6 - 13 1065 1066 1067 1068 1072 1073 1074 1079 1080 1081 5001 5002 5011 5003 1069 1070 1071 1075 1076 1077 1078 1082 1083 1084 1085 1045 5013 1086 5004 5014 5015 1087 5005 5006 1043 5016 1088 5007 5008 5017 5018 1089 5009 5010 7013 5019 1090 1048 5012 (1048 if double key) Figure 6-5 NCR 7052 58-KEY 1046 (1043 if double key) 6 - 14 Symbol LS3578 Product Reference Guide ASCII Character Set NOTE Code 39 Full ASCII interprets the bar code special character ($ + % /) preceding a Code 39 character and assigns an ASCII character value to the pair. For example, when Code 39 Full ASCII is enabled and a +B is scanned, it is interpreted as b, %J as ?, and %V as @. Scanning ABC%I outputs the keystroke equivalent of ABC >. Table 6-2 Keyboard Wedge ASCII Character Set Full ASCII Code 39 Encode Character ASCII Value Keystroke 1001 $A CTRL A 1002 $B CTRL B 1003 $C CTRL C 1004 $D CTRL D 1005 $E CTRL E 1006 $F CTRL F 1007 $G CTRL G 1008 $H CTRL H/ BACKSPACE1 1009 $I CTRL I/ HORIZONTAL TAB1 1010 $J CTRL J 1011 $K CTRL K 1012 $L CTRL L 1013 $M CTRL M/ENTER1 1014 $N CTRL N 1015 $O CTRL O 1016 $P CTRL P 1017 $Q CTRL Q 1018 $R CTRL R 1019 $S CTRL S 1020 $T CTRL T 1The keystroke in bold is sent only if the “Function Key Mapping” is enabled. Otherwise, the unbolded keystroke is sent. Keyboard Wedge Interface 6 - 15 Table 6-2 Keyboard Wedge ASCII Character Set (Continued) Full ASCII Code 39 Encode Character ASCII Value Keystroke 1021 $U CTRL U 1022 $V CTRL V 1023 $W CTRL W 1024 $X CTRL X 1025 $Y CTRL Y 1026 $Z CTRL Z 1027 %A CTRL [/ESC1 1028 %B CTRL \ 1029 %C CTRL ] 1030 %D CTRL 6 1031 %E CTRL - 1032 Space Space 1033 /A ! 1034 /B “ 1035 /C # 1036 /D $ 1037 /E % 1038 /F & 1039 /G ‘ 1040 /H ( 1041 /I ) 1042 /J * 1043 /K + 1044 /L , 1045 - - 1046 . . 1047 /O / 1 The keystroke in bold is sent only if the “Function Key Mapping” is enabled. Otherwise, the unbolded keystroke is sent. 6 - 16 Symbol LS3578 Product Reference Guide Table 6-2 Keyboard Wedge ASCII Character Set (Continued) Full ASCII Code 39 Encode Character ASCII Value Keystroke 1048 0 0 1049 1 1 1050 2 2 1051 3 3 1052 4 4 1053 5 5 1054 6 6 1055 7 7 1056 8 8 1057 9 9 1058 /Z : 1059 %F ; 1060 %G < 1061 %H = 1062 %I > 1063 %J ? 1064 %V @ 1065 A A 1066 B B 1067 C C 1068 D D 1069 E E 1070 F F 1071 G G 1072 H H 1073 I I 1074 J J 1The keystroke in bold is sent only if the “Function Key Mapping” is enabled. Otherwise, the unbolded keystroke is sent. Keyboard Wedge Interface 6 - 17 Table 6-2 Keyboard Wedge ASCII Character Set (Continued) Full ASCII Code 39 Encode Character ASCII Value Keystroke 1075 K K 1076 L L 1077 M M 1078 N N 1079 O O 1080 P P 1081 Q Q 1082 R R 1083 S S 1084 T T 1085 U U 1086 V V 1087 W W 1088 X X 1089 Y Y 1090 Z Z 1091 %K [ 1092 %L \ 1093 %M ] 1094 %N ^ 1095 %O _ 1096 %W ‘ 1097 +A a 1098 +B b 1099 +C c 1100 +D d 1101 +E e 1The keystroke in bold is sent only if the “Function Key Mapping” is enabled. Otherwise, the unbolded keystroke is sent. 6 - 18 Symbol LS3578 Product Reference Guide Table 6-2 Keyboard Wedge ASCII Character Set (Continued) Full ASCII Code 39 Encode Character ASCII Value Keystroke 1102 +F f 1103 +G g 1104 +H h 1105 +I i 1106 +J j 1107 +K k 1108 +L l 1109 +M m 1110 +N n 1111 +O o 1112 +P p 1113 +Q q 1114 +R r 1115 +S s 1116 +T t 1117 +U u 1118 +V v 1119 +W w 1120 +X x 1121 +Y y 1122 +Z z 1123 %P { 1124 %Q | 1125 %R } 1126 %S ~ 1 The keystroke in bold is sent only if the “Function Key Mapping” is enabled. Otherwise, the unbolded keystroke is sent. Keyboard Wedge Interface 6 - 19 Table 6-3 Keyboard Wedge ALT Key Character Set ALT Keys Keystroke 2065 ALT A 2066 ALT B 2067 ALT C 2068 ALT D 2069 ALT E 2070 ALT F 2071 ALT G 2072 ALT H 2073 ALT I 2074 ALT J 2075 ALT K 2076 ALT L 2077 ALT M 2078 ALT N 2079 ALT O 2080 ALT P 2081 ALT Q 2082 ALT R 2083 ALT S 2084 ALT T 2085 ALT U 2086 ALT V 2087 ALT W 2088 ALT X 2089 ALT Y 2090 ALT Z 6 - 20 Symbol LS3578 Product Reference Guide Table 6-4 Keyboard Wedge GUI Key Character Set GUI Keys Keystrokes 3000 Right Control Key 3048 GUI 0 3049 GUI 1 3050 GUI 2 3051 GUI 3 3052 GUI 4 3053 GUI 5 3054 GUI 6 3055 GUI 7 3056 GUI 8 3057 GUI 9 3065 GUI A 3066 GUI B 3067 GUI C 3068 GUI D 3069 GUI E 3070 GUI F 3071 GUI G 3072 GUI H 3073 GUI I 3074 GUI J 3075 GUI K 3076 GUI L 3077 GUI M 3078 GUI N 3079 GUI O 3080 GUI P 3081 GUI Q 3082 GUI R 3083 GUI S Keyboard Wedge Interface 6 - 21 Table 6-4 Keyboard Wedge GUI Key Character Set (Continued) GUI Keys Keystrokes 3084 GUI T 3085 GUI U 3086 GUI V 3087 GUI W 3088 GUI X 3089 GUI Y 3090 GUI Z Table 6-5 Keyboard Wedge F Key Character Set F Keys Keystroke 5001 F1 5002 F2 5003 F3 5004 F4 5005 F5 5006 F6 5007 F7 5008 F8 5009 F9 5010 F10 5011 F11 5012 F12 5013 F13 5014 F14 5015 F15 5016 F16 5017 F17 5018 F18 5019 F19 5020 F20 6 - 22 Symbol LS3578 Product Reference Guide Table 6-5 Keyboard Wedge F Key Character Set (Continued) F Keys Keystroke 5021 F21 5022 F22 5023 F23 5024 F24 Table 6-6 Keyboard Wedge Numeric Keypad Character Set Numeric Keypad Keystroke 6042 * 6043 + 6044 undefined 6045 - 6046 . 6047 / 6048 0 6049 1 6050 2 6051 3 6052 4 6053 5 6054 6 6055 7 6056 8 6057 9 6058 Enter 6059 Num Lock Keyboard Wedge Interface 6 - 23 Table 6-7 Keyboard Wedge Extended Keypad Character Set Extended Keypad Keystroke 7001 Break 7002 Delete 7003 Pg Up 7004 End 7005 Pg Dn 7006 Pause 7007 Scroll Lock 7008 Backspace 7009 Tab 7010 Print Screen 7011 Insert 7012 Home 7013 Enter 7014 Escape 7015 Up Arrow 7016 Dn Arrow 7017 Left Arrow 7018 Right Arrow 6 - 24 Symbol LS3578 Product Reference Guide Chapter 7 RS-232 Interface Introduction This chapter provides instructions for programming the scanner to interface with an RS-232 host interface. The RS-232 interface is used to attach the cradle to point-of-sale devices, host computers, or other devices with an available RS-232 port (i.e., COM port). If the particular host is not listed in Table 7-2, set the communication parameters to match the host device. Refer to the documentation for the host device. NOTE This scanner uses TTL RS-232 signal levels, which interface with most system architectures. For system architectures requiring RS-232C signal levels, Motorola offers different cables providing the TTL to RS-232C conversion. Contact Motorola Enterprise Mobility Support for more information. Throughout the bar code menus, default values are indicated with asterisks (*). * Indicates Default *Baud Rate 9600 Feature/Option 7-2 Symbol LS3578 Product Reference Guide Connecting an RS-232 Interface This connection is made directly from the cradle to the host computer. Serial Port Connector to Host Interface cable Figure 7-1 RS-232 Direct Connection NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 7-1 are examples only. The connectors may be different from those illustrated, but the steps to connect the cradle remain the same. NOTE Disconnect the power supply before changing host cables or the scanner may not recognize the new host. 1. Attach the modular connector of the RS-232 interface cable to the cable interface port on the cradle. See Connecting the Cradle on page 1-4. 2. Connect the other end of the RS-232 interface cable to the serial port on the host. 3. If required, connect the power supply to the cradle. 4. Ensure that all connections are secure. 5. Pair the scanner to the cradle by scanning the bar code on the cradle. 6. Select the RS-232 host type by scanning the appropriate bar code from RS-232 Host Types on page 7-6. 7. To modify any other parameter options, scan the appropriate bar codes in this chapter. RS-232 Interface 7-3 RS-232 Default Parameters Table 7-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s) provided in the parameter descriptions section beginning on page 7-4. NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and miscellaneous default parameters. Table 7-1 RS-232 Host Default Table Parameter Default Page Number RS-232 Host Parameters RS-232 Host Types Standard RS-232 7-6 Baud Rate 9600 7-7 Parity None 7-9 Check Receive Errors Enable 7-10 Stop Bit Select 1 Stop Bit 7-11 Data Bits 8-Bit 7-11 Hardware Handshaking None 7-12 Software Handshaking None 7-14 Host Serial Response Time-out Minimum: 2 sec 7-16 RTS Line State Host: Low RTS 7-17 Beep on Disable 7-17 Intercharacter Delay Minimum: 0 msec 7-18 Nixdorf Beep/LED Options Normal Operation 7-19 Ignore Unknown Characters Send Bar Code 7-20 7-4 Symbol LS3578 Product Reference Guide RS-232 Host Parameters Various RS-232 host types are set up with their own parameter default settings. Selecting the host type sets the parameter defaults as listed in Table 7-2. Table 7-2 Terminal Specific RS-232 Parameter Standard RS-232 (Default) ICL WincorNixdorf Mode A WincorNixdorf Mode B Olivetti Omron OPOS/ JPOS Fujitsu Transmit Code ID No Yes Yes Yes Yes Yes Yes Yes Data Transmission Format Data as is Data/Suffix Data/Suffix Data/ Suffix Prefix/ Data/ Suffix Data/ Suffix Data/ Suffix Data/ Suffix Suffix CR/LF (7013) CR (1013) CR (1013) CR (1013) ETX (1002) CR (1013) CR (1013) CR (1013) Baud Rate 9600 9600 9600 9600 9600 9600 9600 9600 Parity None Even Odd Odd Even None Odd None Hardware Handshaking None RTS/CTS Option 3 RTS/CTS Option 3 RTS/CTS Option 3 None None RTS/CTS Option 3 None Software Handshaking None None None None Ack/Nak None None None Serial Response Time-out 2 Sec. 9.9 Sec. 9.9 Sec. 9.9 Sec. 9.9 Sec. 9.9 Sec. 9.9 Sec. 2 Sec. Stop Bit Select One One One One One One One One ASCII Format 8-Bit 8-Bit 8-Bit 8-Bit 7-Bit 8-Bit 8-Bit 8-Bit Beep On Disable Disable Disable Disable Disable Disable Disable Disable RTS Line State Low High Low Low = No data to send Low High Low = No data to send Low Prefix None None None None STX (1003) None None None *In the Nixdorf Mode B or OPOS/JPOS, if CTS is Low, scanning is disabled. When CTS is High, the user can scan bar codes. **If Nixdorf Mode B or OPOS/JPOS is scanned without the scanner connected to the proper host, it may appear unable to scan. If this happens, scan a different RS-232 host type within 5 seconds of cycling power to the scanner. RS-232 Interface 7-5 RS-232 Host Parameters (continued) Selecting the ICL, Wincor-Nixdorf Mode A, Wincor-Nixdorf Mode B, Olivetti, Omron, OPOS/JPOS or Fujitsu host type enables the transmission of code ID characters listed in Table 7-3. These code ID characters are not programmable and are separate from the Transmit Code ID feature. Do not enable the Transmit Code ID feature for these terminals. Table 7-3 Terminal Specific Code ID Characters ICL WincorNixdorf Mode A WincorNixdorf Mode B Olivetti OPOS/ JPOS Omron Fujitsu UPC-A A A A A A A A UPC-E E C C C E C E EAN-8/JAN-8 FF B B B FF B FF EAN-13/JAN-13 F A A A F A F Code 39 C M M M C M None Codabar N N N N N N None Code 128 L K K K L K None I 2 of 5 I I I I I I None Code 93 None L L L None L None D 2 of 5 H H H H H H None UCC/EAN 128 L P P P L P None MSI None O O O None O None Bookland EAN F A A A F A F Trioptic None None None None None None None Code 11 None None None None None None None IATA H H H None None H None Code 32 None None None None None None None 7-6 Symbol LS3578 Product Reference Guide RS-232 Host Types To select an RS-232 host type, scan one of the following bar codes. *Standard RS-232 ICL RS-232 Wincor-Nixdorf RS-232 Mode A Wincor-Nixdorf RS-232 Mode B Olivetti ORS4500 Omron RS-232 Interface 7-7 RS-232 Host Types (continued) OPOS/JPOS Fujitsu RS-232 Baud Rate Baud rate is the number of bits of data transmitted per second. Set the scanner’s baud rate to match the baud rate setting of the host device. Otherwise, data may not reach the host device or may reach it in distorted form. Baud Rate 600 Baud Rate 1200 Baud Rate 2400 7-8 Symbol LS3578 Product Reference Guide Baud Rate (continued) Baud Rate 4800 *Baud Rate 9600 Baud Rate 19,200 Baud Rate 38,400 RS-232 Interface 7-9 Parity A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host device requirements. Select Odd parity to set the parity bit value to 0 or 1, based on data, to ensure that an odd number of 1 bits are contained in the coded character. Odd Select Even parity to set the parity bit value to 0 or 1, based on data, to ensure that an even number of 1 bits are contained in the coded character. Even Select Mark parity and the parity bit is always 1. Mark 7 - 10 Symbol LS3578 Product Reference Guide Parity (continued) Select Space parity and the parity bit is always 0. Space Select None when no parity bit is required. *None Check Receive Errors Select whether or not to check the parity, framing, and overrun of received characters. The parity value of received characters is verified against the parity parameter selected above. *Check For Received Errors (Enable) Do Not Check For Received Errors (Disable) RS-232 Interface 7 - 11 Stop Bit Select The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and prepares the receiving device for the next character in the serial data stream. The number of stop bits selected (one or two) depends on the number the receiving terminal is programmed to accommodate. Set the number of stop bits to match host device requirements. *1 Stop Bit 2 Stop Bits Data Bits This parameter allows the scanner to interface with devices requiring a 7-bit or 8-bit ASCII protocol. 7-Bit *8-Bit 7 - 12 Symbol LS3578 Product Reference Guide Hardware Handshaking The data interface consists of an RS-232 port designed to operate either with or without the hardware handshaking lines, Request to Send (RTS), and Clear to Send (CTS). If Standard RTS/CTS handshaking is not selected, scan data is transmitted as it becomes available. If Standard RTS/CTS handshaking is selected, scan data is transmitted according to the following sequence: • The scanner reads the CTS line for activity. If CTS is asserted, the scanner waits up to the Host Serial Response Time-out for the host to de-assert the CTS line. If, after Host Serial Response Time-out (default), the CTS line is still asserted, the scanner sounds a transmit error, and any scanned data is lost. • When the CTS line is de-asserted, the scanner asserts the RTS line and waits up to the Host Serial Response Time-out for the host to assert CTS. When the host asserts CTS, data is transmitted. If, after Host Serial Response Time-out (default), the CTS line is still de-asserted, the scanner sounds a transmit error, and discards the data. • When data transmission is complete, the scanner de-asserts RTS 10 msec after sending the last character. • The host should respond by de-asserting CTS. The scanner checks for a de-asserted CTS upon the next transmission of data. During the transmission of data, the CTS line should be asserted. If CTS is de-asserted for more than 50 ms between characters, the transmission is aborted, the scanner sounds a transmission error, and the data is discarded. If this communications sequence fails, the scanner issues an error indication. In this case, the data is lost and must be rescanned. If Hardware Handshaking and Software Handshaking are both enabled, Hardware Handshaking takes precedence. NOTE The DTR signal is jumpered (set) to the active state. None Scan the bar code below if no Hardware Handshaking is desired. *None Standard RTS/CTS Scan the bar code below to select Standard RTS/CTS Hardware Handshaking. Standard RTS/CTS RS-232 Interface 7 - 13 Hardware Handshaking (continued) RTS/CTS Option 1 When RTS/CTS Option 1 is selected, the scanner asserts RTS before transmitting and ignores the state of CTS. The scanner de-asserts RTS when the transmission is complete. RTS/CTS Option 1 RTS/CTS Option 2 When Option 2 is selected, RTS is always high or low (user-programmed logic level). However, the scanner waits for CTS to be asserted before transmitting data. If CTS is not asserted within Host Serial Response Time-out (default), the scanner issues an error indication and discards the data. RTS/CTS Option 2 RTS/CTS Option 3 When Option 3 is selected, the scanner asserts RTS prior to any data transmission, regardless of the state of CTS. The scanner waits up to Host Serial Response Time-out (default) for CTS to be asserted. If CTS is not asserted during this time, the scanner issues an error indication and discards the data. The scanner de-asserts RTS when transmission is complete. RTS/CTS Option 3 7 - 14 Symbol LS3578 Product Reference Guide Software Handshaking This parameter offers control of the data transmission process in addition to, or instead of, that offered by hardware handshaking. There are five options. If Software Handshaking and Hardware Handshaking are both enabled, Hardware Handshaking takes precedence. None When this option is selected, data is transmitted immediately. No response is expected from the host. *None ACK/NAK When this option is selected, after transmitting data, the scanner expects either an ACK or NAK response from the host. When a NAK is received, the scanner transmits the same data again and waits for either an ACK or NAK. After three unsuccessful attempts to send data when NAKs are received, the scanner issues an error indication and discards the data. The scanner waits up to the programmable Host Serial Response Time-out to receive an ACK or NAK. If the scanner does not get a response in this time, it issues an error indication and discards the data. There are no retries when a time-out occurs. ACK/NAK RS-232 Interface 7 - 15 Software Handshaking (continued) ENQ When this option is selected, the scanner waits for an ENQ character from the host before transmitting data. If an ENQ is not received within the Host Serial Response Time-out, the scanner issues an error indication and discards the data. The host must transmit an ENQ character at least every Host Serial Response Time-out to prevent transmission errors. ENQ ACK/NAK with ENQ This combines the two previous options. For re-transmissions of data, due to a NAK from the host, an additional ENQ is not required. ACK/NAK with ENQ XON/XOFF An XOFF character turns the scanner transmission off until the scanner receives an XON character. There are two situations for XON/XOFF: • XOFF is received before the scanner has data to send. When the scanner has data to send, it waits up to Host Serial Response Time-out for an XON character before transmission. If the XON is not received within this time, the scanner issues an error indication and discards the data. • XOFF is received during a transmission. Data transmission then stops after sending the current byte. When the scanner receives an XON character, it sends the rest of the data message. The scanner waits up to 30 seconds for the XON. XON/XOFF 7 - 16 Symbol LS3578 Product Reference Guide Host Serial Response Time-out This parameter specifies how long the scanner waits for an ACK, NAK, or CTS before determining that a transmission error has occurred. This only applies when in one of the ACK/NAK Software Handshaking modes, or RTS/CTS Hardware Handshaking option. NOTE This parameter does not apply to the Wincor-Nixdorf RS-232 Mode A/B and the OPOS/JPOS host types. *Minimum: 2 sec Low: 2.5 Sec Medium: 5 Sec High: 7.5 Sec Maximum: 9.9 Sec RS-232 Interface 7 - 17 RTS Line State This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High RTS line state. *Host: Low RTS Host: High RTS Beep on Point-to-Point Mode Only When this parameter is enabled, the scanner issues a beep when a character is detected on the RS-232 serial line. is issued to indicate an illegal entry or other important event. NOTE This parameter is not supported in Multipoint-to-Point Mode. Beep On Character (Enable) *Do Not Beep On Character (Disable) 7 - 18 Symbol LS3578 Product Reference Guide Intercharacter Delay This parameter specifies the intercharacter delay inserted between character transmissions. *Minimum: 0 msec Low: 25 msec Medium: 50 msec High: 75 msec Maximum: 99 msec RS-232 Interface 7 - 19 Nixdorf Mode A/B and OPOS/JPOS Beep/LED Options When Nixdorf Mode A, Nixdorf Mode B, or OPOS/JPOS is selected, this parameter indicates when the scanner should beep and turn on its LED after a decode. NOTE The Beep/LED After CTS Pulse option is not valid when Nixdorf Mode A is selected. *Normal Operation (Beep/LED Immediately After Decode) Beep/LED After Transmission Beep/LED After CTS Pulse 7 - 20 Symbol LS3578 Product Reference Guide Ignore Unknown Characters Unknown characters are characters the host does not recognize. When Send Bar Codes with Unknown Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound on the scanner. When Do Not Send Bar Codes With Unknown Characters is selected, bar code data is sent up to the first unknown character and then an error beep sounds on the scanner. *Send Bar Code with Unknown Characters (Enable) Do Not Send Bar Codes with Unknown Characters (Disable) ASCII / Character Set The values in Table 7-4 can be assigned as prefixes or suffixes for ASCII character data transmission. Table 7-4 RS-232 Prefix/Suffix Values Prefix/Suffix Value Full ASCII Code 39 Encode Character ASCII Character 1000 %U NUL 1001 $A SOH 1002 $B STX 1003 $C ETX 1004 $D EOT 1005 $E ENQ 1006 $F ACK 1007 $G BELL 1008 $H BCKSPC 1009 $I HORIZ TAB 1010 $J LF/NW LN 1011 $K VT RS-232 Interface 7 - 21 Table 7-4 RS-232 Prefix/Suffix Values (Continued) Prefix/Suffix Value Full ASCII Code 39 Encode Character ASCII Character 1012 $L FF 1013 $M CR/ENTER 1014 $N SO 1015 $O SI 1016 $P DLE 1017 $Q DC1/XON 1018 $R DC2 1019 $S DC3/XOFF 1020 $T DC4 1021 $U NAK 1022 $V SYN 1023 $W ETB 1024 $X CAN 1025 $Y EM 1026 $Z SUB 1027 %A ESC 1028 %B FS 1029 %C GS 1030 %D RS 1031 %E US 1032 Space Space 1033 /A ! 1034 /B " 1035 /C # 1036 /D $ 1037 /E % 1038 /F & 1039 /G ‘ 1040 /H ( 1041 /I ) 7 - 22 Symbol LS3578 Product Reference Guide Table 7-4 RS-232 Prefix/Suffix Values (Continued) Prefix/Suffix Value Full ASCII Code 39 Encode Character ASCII Character 1042 /J * 1043 /K + 1044 /L , 1045 - - 1046 . . 1047 /O / 1048 0 0 1049 1 1 1050 2 2 1051 3 3 1052 4 4 1053 5 5 1054 6 6 1057 7 7 1056 8 8 1057 9 9 1058 /Z : 1059 %F ; 1060 %G < 1061 %H = 1062 %I > 1063 %J ? 1064 %V @ 1065 A A 1066 B B 1067 C C 1068 D D 1069 E E 1070 F F 1071 G G RS-232 Interface 7 - 23 Table 7-4 RS-232 Prefix/Suffix Values (Continued) Prefix/Suffix Value Full ASCII Code 39 Encode Character ASCII Character 1072 H H 1073 I I 1074 J J 1075 K K 1076 L L 1077 M M 1078 N N 1079 O O 1080 P P 1081 Q Q 1082 R R 1083 S S 1084 T T 1085 U U 1086 V V 1087 W W 1088 X X 1089 Y Y 1090 Z Z 1091 %K [ 1092 %L \ 1093 %M ] 1094 %N ^ 1095 %O _ 1096 %W ` 1097 +A a 1098 +B b 1099 +C c 1100 +D d 1101 +E e 7 - 24 Symbol LS3578 Product Reference Guide Table 7-4 RS-232 Prefix/Suffix Values (Continued) Prefix/Suffix Value Full ASCII Code 39 Encode Character ASCII Character 1102 +F f 1103 +G g 1104 +H h 1105 +I i 1106 +J j 1107 +K k 1108 +L l 1109 +M m 1110 +N n 1111 +O o 1112 +P p 1113 +Q q 1114 +R r 1115 +S s 1116 +T t 1117 +U u 1118 +V v 1119 +W w 1120 +X x 1121 +Y y 1122 +Z z 1123 %P { 1124 %Q | 1125 %R } 1126 %S ~ 1127 Undefined 7013 ENTER Chapter 8 USB Interface Introduction This chapter provides instructions for programming the scanner to interface with a USB host. The cradle connects directly to a USB host, or a powered USB hub. The USB host can power the cradle and recharge the scanner battery, but this charging method has limitations. See Using the USB Interface to Supply Power on page 1-6. Throughout the programming bar code menus, default values are indicated with asterisks (*). * Indicates Default *North American Standard USB Keyboard Feature/Option 8-2 Symbol LS3578 Product Reference Guide Connecting a USB Interface USB Series A Connector Interface cable Figure 8-1 USB Connection The cradle connects with USB-capable hosts including: • Desktop PCs and notebooks • Apple™ Macintosh • IBM SurePOS terminals • Sun, IBM, and other network computers that support more than one keyboard. The following operating systems support the scanner through USB: • Windows® 98, 2000, ME, XP, Vista • Mac OS 8.5 and above • IBM 4690 OS. The cradle also interfaces with other USB hosts which support USB Human Interface Devices (HID). For more information on USB technology, hosts, and peripheral devices, visit http://www.symbol.com/usb. To connect the cradle to a USB host: 1. Attach the modular connector of the USB interface cable to the cable interface port on the scanner. See Connecting the Cradle on page 1-4. 2. Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port of the IBM SurePOS terminal. 3. Ensure all connections are secure. 4. Pair the scanner to the cradle by scanning the bar code on the cradle. 5. Select the USB device type by scanning the appropriate bar code from USB Device Type on page 8-5. USB Interface 8-3 6. On first installation when using Windows, the software displays a prompt to select or install the Human Interface Device driver. To install the Human Interface Device driver provided by Windows, click Next through all the choices and click Finished on the last choice. The scanner powers up during this installation. 7. To modify any other parameter options, scan the appropriate bar codes in this chapter. 8. Connect an external power supply if desired. NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 8-1 are examples only. The connectors may be different from those illustrated, but the steps to connect the cradle remain the same. NOTE Disconnect the power supply before changing host cables or the scanner may not recognize the new host. If problems occur, see Troubleshooting on page 3-2. 8-4 Symbol LS3578 Product Reference Guide USB Default Parameters Table 8-1 lists the defaults for USB host parameters. To change any option, scan the appropriate bar code(s) provided in the parameter descriptions section beginning on page 8-5. NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and miscellaneous default parameters. Table 8-1 USB Host Default Table Parameter Default Page Number USB Host Parameters USB Device Type HID Keyboard Emulation 8-5 USB Country Keyboard Types (Country Codes) North American 8-6 USB Keystroke Delay No Delay (0 msec) 8-8 USB Caps Lock Override Disable 8-9 USB Ignore Unknown Characters Enable 8-9 Emulate Keypad Disable 8-10 USB Keyboard FN1 Substitution Disable 8-10 Function Key Mapping Disable 8-11 Simulated Caps Lock Disable 8-11 Convert Case No Case Conversion 8-12 USB Interface USB Host Parameters USB Device Type Select the desired USB device type. NOTE When changing USB Device Types, the scanner disconnects and reconnects as the cradle re-enumerates on the USB bus. *HID Keyboard Emulation IBM Table Top USB IBM Hand-Held USB USB OPOS Handheld 8-5 8-6 Symbol LS3578 Product Reference Guide USB Country Keyboard Types (Country Codes) Scan the bar code corresponding to the keyboard type. This setting applies only to the USB HID Keyboard Emulation device. NOTE When changing USB Country Keyboard Types, the scanner resets and issues the standard startup beep sequences. *North American Standard USB Keyboard German Windows French Windows French Canadian Windows 95/98 French Canadian Windows 2000/XP USB Interface USB Country Keyboard Types (Country Codes) (continued) French Belgian Windows Spanish Windows Italian Windows Swedish Windows UK English Windows Japanese Windows (ASCII) Brazilian-Portuguese Windows 8-7 8-8 Symbol LS3578 Product Reference Guide USB Keystroke Delay This parameter sets the delay, in milliseconds, between emulated keystrokes. Scan a bar code below to increase the delay when hosts require slower data transmission. *No Delay (0 msec) Medium Delay (20 msec) Long Delay (40 msec) USB Interface 8-9 USB Caps Lock Override This option applies only to the HID Keyboard Emulation device. When enabled, the case of the data is preserved regardless of the state of the caps lock key. This setting is always enabled for the Japanese, Windows (ASCII) keyboard type and can not be disabled. Override Caps Lock Key (Enable) *Do Not Override Caps Lock Key (Disable) USB Ignore Unknown Characters Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound. When Do Not Send Bar Codes With Unknown Characters is selected, bar codes containing at least one unknown character are not sent to the host, and an error beep sounds. *Send Bar Codes with Unknown Characters (Enable) Do Not Send Bar Codes with Unknown Characters (Disable) 8 - 10 Symbol LS3578 Product Reference Guide Emulate Keypad When enabled, all characters are sent as ASCII sequences over the numeric keypad. For example ASCII A is sent as “ALT make” 0 6 5 “ALT Break.” *Disable Keypad Emulation Enable Keypad Emulation USB Keyboard FN 1 Substitution This option applies only to the USB HID Keyboard Emulation device. When enabled, this replaces any FN 1 characters in an EAN 128 bar code with a Key Category and a selected value. See FN1 Substitution Values on page 5-15 to set the Key Category and Key Value. Enable USB Keyboard FN 1 Substitution *Disable USB Keyboard FN 1 Substitution USB Interface 8 - 11 Function Key Mapping ASCII values under 32 are normally sent as control-key sequences (see Table 8-2 on page 8-13). When this parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not have a bold entry remain the same regardless of this parameter. *Disable Function Key Mapping Enable Function Key Mapping Simulated Caps Lock When enabled, the scanner inverts upper and lower case characters on the scanner bar code as if the Caps Lock state is enabled on the keyboard. This inversion is done regardless of the keyboard’s Caps Lock state. *Disable Simulated Caps Lock Enable Simulated Caps Lock 8 - 12 Symbol LS3578 Product Reference Guide Convert Case When enabled, the scanner converts all bar code data to the selected case. *No Case Conversion Convert All to Upper Case Convert All to Lower Case USB Interface 8 - 13 ASCII Character Set Table 8-2 USB Prefix/Suffix Values Prefix/ Suffix Value Full ASCII Code 39 Encode Character Keystroke 1000 %U CTRL 2 1001 $A CTRL A 1002 $B CTRL B 1003 $C CTRL C 1004 $D CTRL D 1005 $E CTRL E 1006 $F CTRL F 1007 $G CTRL G 1008 $H CTRL H/ BACKSPACE1 1009 $I CTRL I /HORIZONTAL TAB1 1010 $J CTRL J 1011 $K CTRL K 1012 $L CTRL L 1013 $M CTRL M/ENTER1 1014 $N CTRL N 1015 $O CTRL O 1016 $P CTRL P 1017 $Q CTRL Q 1018 $R CTRL R 1019 $S CTRL S 1020 $T CTRL T 1021 $U CTRL U 1022 $V CTRL V 1023 $W CTRL W 1024 $X CTRL X 1 The keystroke in bold is sent only if the “Function Key Mapping” is enabled. Otherwise, the unbolded keystroke is sent. 8 - 14 Symbol LS3578 Product Reference Guide Table 8-2 USB Prefix/Suffix Values (Continued) Prefix/ Suffix Value Full ASCII Code 39 Encode Character Keystroke 1025 $Y CTRL Y 1026 $Z CTRL Z 1027 %A CTRL [/ESC1 1028 %B CTRL \ 1029 %C CTRL ] 1030 %D CTRL 6 1031 %E CTRL - 1032 Space Space 1033 /A ! 1034 /B “ 1035 /C # 1036 /D $ 1037 /E % 1038 /F & 1039 /G ‘ 1040 /H ( 1041 /I ) 1042 /J * 1043 /K + 1044 /L , 1045 - - 1046 . . 1047 /O / 1048 0 0 1049 1 1 1050 2 2 1051 3 3 1052 4 4 1 The keystroke in bold is sent only if the “Function Key Mapping” is enabled. Otherwise, the unbolded keystroke is sent. USB Interface 8 - 15 Table 8-2 USB Prefix/Suffix Values (Continued) Prefix/ Suffix Value Full ASCII Code 39 Encode Character Keystroke 1053 5 5 1054 6 6 1055 7 7 1056 8 8 1057 9 9 1058 /Z : 1059 %F ; 1060 %G < 1061 %H = 1062 %I > 1063 %J ? 1064 %V @ 1065 A A 1066 B B 1067 C C 1068 D D 1069 E E 1070 F F 1071 G G 1072 H H 1073 I I 1074 J J 1075 K K 1076 L L 1077 M M 1078 N N 1079 O O 1080 P P 1The keystroke in bold is sent only if the “Function Key Mapping” is enabled. Otherwise, the unbolded keystroke is sent. 8 - 16 Symbol LS3578 Product Reference Guide Table 8-2 USB Prefix/Suffix Values (Continued) Prefix/ Suffix Value Full ASCII Code 39 Encode Character Keystroke 1081 Q Q 1082 R R 1083 S S 1084 T T 1085 U U 1086 V V 1087 W W 1088 X X 1089 Y Y 1090 Z Z 1091 %K [ 1092 %L \ 1093 %M ] 1094 %N ^ 1095 %O _ 1096 %W ` 1097 +A a 1098 +B b 1099 +C c 1100 +D d 1101 +E e 1102 +F f 1103 +G g 1104 +H h 1105 +I i 1106 +J j 1107 +K k 1108 +L l 1The keystroke in bold is sent only if the “Function Key Mapping” is enabled. Otherwise, the unbolded keystroke is sent. USB Interface 8 - 17 Table 8-2 USB Prefix/Suffix Values (Continued) Prefix/ Suffix Value Full ASCII Code 39 Encode Character Keystroke 1109 +M m 1110 +N n 1111 +O o 1112 +P p 1113 +Q q 1114 +R r 1115 +S s 1116 +T t 1117 +U u 1118 +V v 1119 +W w 1120 +X x 1121 +Y y 1122 +Z z 1123 %P { 1124 %Q | 1125 %R } 1126 %S ~ 1 The keystroke in bold is sent only if the “Function Key Mapping” is enabled. Otherwise, the unbolded keystroke is sent. 8 - 18 Symbol LS3578 Product Reference Guide Table 8-3 USB ALT Key Character Set ALT Keys Keystroke 2064 ALT 2 2065 ALT A 2066 ALT B 2067 ALT C 2068 ALT D 2069 ALT E 2070 ALT F 2071 ALT G 2072 ALT H 2073 ALT I 2074 ALT J 2075 ALT K 2076 ALT L 2077 ALT M 2078 ALT N 2079 ALT O 2080 ALT P 2081 ALT Q 2082 ALT R 2083 ALT S 2084 ALT T 2085 ALT U 2086 ALT V 2087 ALT W 2088 ALT X 2089 ALT Y 2090 ALT Z USB Interface 8 - 19 Table 8-4 USB GUI Key Character Set GUI Key Keystroke 3000 Right Control Key 3048 GUI 0 3049 GUI 1 3050 GUI 2 3051 GUI 3 3052 GUI 4 3053 GUI 5 3054 GUI 6 3055 GUI 7 3056 GUI 8 3057 GUI 9 3065 GUI A 3066 GUI B 3067 GUI C 3068 GUI D 3069 GUI E 3070 GUI F 3071 GUI G 3072 GUI H 3073 GUI I 3074 GUI J 3075 GUI K 3076 GUI L 3077 GUI M 3078 GUI N 3079 GUI O 3080 GUI P Note: GUI Shift Keys - The Apple™ iMac keyboard has an apple key on either side of the space bar. Windows-based systems have a GUI key to the left of the left ALT key, and to the right of the right ALT key. 8 - 20 Symbol LS3578 Product Reference Guide Table 8-4 USB GUI Key Character Set (Continued) GUI Key Keystroke 3081 GUI Q 3082 GUI R 3083 GUI S 3084 GUI T 3085 GUI U 3086 GUI V 3087 GUI W 3088 GUI X 3089 GUI Y 3090 GUI Z Note: GUI Shift Keys - The Apple™ iMac keyboard has an apple key on either side of the space bar. Windows-based systems have a GUI key to the left of the left ALT key, and to the right of the right ALT key. Table 8-5 USB F Key Character Set F Keys Keystroke 5001 F1 5002 F2 5003 F3 5004 F4 5005 F5 5006 F6 5007 F7 5008 F8 5009 F9 5010 F10 5011 F11 5012 F12 5013 F13 5014 F14 5015 F15 USB Interface 8 - 21 Table 8-5 USB F Key Character Set (Continued) F Keys Keystroke 5016 F16 5017 F17 5018 F18 5019 F19 5020 F20 5021 F21 5022 F22 5023 F23 5024 F24 Table 8-6 USB Numeric Keypad Character Set Numeric Keypad Keystroke 6042 * 6043 + 6044 undefined 6045 - 6046 . 6047 / 6048 0 6049 1 6050 2 6051 3 6052 4 6053 5 6054 6 6055 7 6056 8 6057 9 6058 Enter 6059 Num Lock 8 - 22 Symbol LS3578 Product Reference Guide Table 8-7 USB Extended Keypad Character Set Extended Keypad Keystroke 7001 Break 7002 Delete 7003 PgUp 7004 End 7005 Pg Dn 7006 Pause 7007 Scroll Lock 7008 Backspace 7009 Tab 7010 Print Screen 7011 Insert 7012 Home 7013 Enter 7014 Escape 7015 Up Arrow 7016 Down Arrow 7017 Left Arrow 7018 Right Arrow Chapter 9 IBM 468X/469X Interface Introduction This chapter provides instructions for programming the scanner to interface with an IBM 468X/469X host computer. Throughout the programming bar code menus, default values are indicated with asterisks (*). * Indicates Default *Disable Convert to Code 39 Feature/Option 9-2 Symbol LS3578 Product Reference Guide Connecting to an IBM 468X/469X Host This connection is made directly from the cradle to the host interface. Interface cable Host Port Connector Figure 9-1 IBM Direct Connection NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 9-1 are examples only. The connectors may be different from those illustrated, but the steps to connect the cradle remain the same. NOTE Disconnect the power supply before changing host cables or the scanner may not recognize the new host. 1. Connect the modular connector of the IBM 46XX interface cable to the cable interface port on the cradle. See Connecting the Cradle on page 1-4. 2. Connect the other end of the IBM 46XX interface cable to the appropriate port on the host (typically Port 9). 3. Connect an external power supply. 4. Ensure all connections are secure. 5. Pair the scanner to the cradle by scanning the bar code on the cradle. 6. Select the port address by scanning the appropriate bar code from Port Address on page 9-4. 7. To modify other parameter options, scan the appropriate bar codes in this chapter. NOTE The only required configuration is the port address. Most other scanner parameters are typically controlled by the IBM system. IBM 468X/469X Interface IBM Default Parameters Table 9-1 lists the defaults for IBM host parameters. To change any option, scan the appropriate bar code(s) provided in the parameter descriptions section beginning on page 9-4. NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and miscellaneous default parameters. Table 9-1 IBM Host Default Table Parameter Default Page Number IBM 468X/469X Host Parameters Port Address None Selected 9-4 Convert Unknown to Code 39 Disable 9-4 9-3 9-4 Symbol LS3578 Product Reference Guide IBM 468X/469X Host Parameters Port Address Use this parameter to set the IBM 468X/469X port. NOTE Scanning one of these bar codes enables the RS-485 interface on the scanner. Hand-held Scanner Emulation (Port 9B) Non-IBM Scanner Emulation (Port 5B) Table-top Scanner Emulation (Port 17) Convert Unknown to Code 39 Scan one of the following bar codes to enable or disable the conversion of unknown bar code type data to Code 39. Convert Unknown to Code 39 (Enable) *Do Not Convert Unknown to Code 39 (Disable) Chapter 10 123Scan Introduction 123Scan is a Windows®-based utility that programs the scanner with all parameters including Advanced Data Formatting (ADF) rules. An ADF rule modifies bar code data before it is sent to the host, ensuring compatibility between bar coded data and the host application without having to modify the host software. Scanners can be programmed via PC download or by scanning a sheet of bar codes generated by 123Scan. Save scanner programming in a file for electronic distribution. 123Scan includes a help file. Setting Up 123Scan To communicate with the 123Scan program: 1. Load 123Scan, included in the documentation CD-ROM, onto a host computer running Windows 98, Windows 2000, or Windows XP. 2. Connect the scanner to the host computer using an RS-232 cable. See Connecting an RS-232 Interface on page 7-2. 3. Scan the following bar code to enable the 123Scan interface on the scanner. Refer to the 123Scan instructions for programming the scanner. 123Scan Configuration NOTE Setting defaults unpairs the scanner with the cradle, and you must rescan the pairing bar code. 10 - 2 Symbol LS3578 Product Reference Guide Chapter 11 Symbologies Introduction This chapter describes symbology features and provides the programming bar codes for selecting these features for the scanner. Before programming, follow the instructions in Chapter 1, Getting Started. The scanner is shipped with the settings shown in the Symbology Default Table on page 11-2 (also see Appendix A, Standard Default Parameters for all host device and miscellaneous scanner defaults). If the default values suit requirements, programming is not necessary. Set feature values by scanning single bar codes or short bar code sequences. To return all features to default values, scan the Default Parameters on page 5-4. If not using a Synapse or USB cable, select the host type (see the specific host chapter) after the scanner emits power-up beeps. Scanning Sequence Examples In most cases, scan only one bar code to set a parameter value. For example, to transmit bar code data without the UPC-A check digit, scan the Do Not Transmit UPC-A Check Digit bar code under Transmit UPC-A/UPC-E/UPC-E1 Check Digit on page 11-12. The scanner issues a fast warble beep and the LED turns green, indicating a successful parameter entry. Other parameters, such as Set Length(s) for D 2 of 5 require scanning several bar codes in sequence. See the parameter description for this procedure. Errors While Scanning Unless otherwise specified, if an error is made during a scanning sequence, re-scan the correct parameter. 11 - 2 Symbol LS3578 Product Reference Guide Symbology Default Parameters Table 11-1 lists the defaults for all symbologies parameters. To change any option, scan the appropriate bar code(s) provided in this chapter. NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and miscellaneous default parameters. Table 11-1 Symbology Default Table Parameter Default Page Number UPC/EAN UPC-A Enable 11-5 UPC-E Enable 11-5 UPC-E1 Disable 11-6 EAN-13/JAN 13 Enable 11-6 EAN-8/JAN 8 Enable 11-7 Bookland EAN Disable 11-7 Decode UPC/EAN/JAN Supplementals (2 and 5 digits) Ignore Supplementals 11-8 User-Programmable Supplementals 11-11 UPC/EAN/JAN Supplemental Redundancy 7 11-12 Transmit UPC-A Check Digit Enable 11-12 Transmit UPC-E Check Digit Enable 11-12 Transmit UPC-E1 Check Digit Enable 11-12 UPC-A Preamble System Character 11-14 UPC-E Preamble System Character 11-15 UPC-E1 Preamble System Character 11-16 Convert UPC-E to A Disable 11-17 Convert UPC-E1 to A Disable 11-17 EAN-8/JAN-8 Extend Disable 11-18 Bookland ISBN Format ISBN-10 11-19 UCC Coupon Extended Code Disable 11-20 Symbologies 11 - 3 Table 11-1 Symbology Default Table (Continued) Parameter Default Page Number Code 128 Code 128 Enable 11-21 UCC/EAN-128 Enable 11-22 ISBT 128 Enable 11-22 Code 39 Enable 11-23 Trioptic Code 39 Disable 11-23 Convert Code 39 to Code 32 Disable 11-24 Code 32 Prefix Disable 11-24 Set Length(s) for Code 39 2 to 55 11-25 Code 39 Check Digit Verification Disable 11-26 Transmit Code 39 Check Digit Disable 11-26 Code 39 Full ASCII Conversion Disable 11-27 Code 93 Disable 11-28 Set Lengths for Code 93 4 to 55 11-28 Code 11 Disable 11-30 Set Lengths for Code 11 4 to 55 11-31 Code 11 Check Digit Verification One Check Digit 11-32 Transmit Code 11 Check Digits Disable 11-33 Interleaved 2 of 5 (I 2 of 5) Enable 11-34 Set Lengths for Interleaved 2 of 5 14 11-34 I 2 of 5 Check Digit Verification Disable 11-36 Transmit I 2 of 5 Check Digit Disable 11-36 Convert I 2 of 5 to EAN-13 Disable 11-37 Discrete 2 of 5 Disable 11-37 Set Lengths for D 2 of 5 12 11-38 Code 39 Code 93 Code 11 Interleaved 2 of 5 (I 2 of 5) Discrete 2 of 5 (D 2 of 5) 11 - 4 Symbol LS3578 Product Reference Guide Table 11-1 Symbology Default Table (Continued) Parameter Default Page Number Codabar (NW - 7) Codabar Disable 11-39 Set Lengths for Codabar 5 to 55 11-40 CLSI Editing Disable 11-41 NOTIS Editing Disable 11-41 MSI Disable 11-42 Set Lengths for MSI 1 to 55 11-43 MSI Check Digits One 11-44 Transmit MSI Check Digit(s) Disable 11-45 MSI Check Digit Algorithm Mod 10/Mod 10 11-45 GS1 DataBar-14 Disable 11-46 GS1 DataBar Limited Disable 11-46 GS1 DataBar Expanded Disable 11-47 Convert GS1 DataBar to UPC/EAN Disable 11-47 Redundancy Level 1 11-48 Security Levels 0 11-50 Bi-directional Redundancy Disable 11-51 MSI GS1 DataBar Symbology - Specific Security Levels Symbologies 11 - 5 UPC/EAN Enable/Disable UPC-A To enable or disable UPC-A, scan the appropriate bar code below. *Enable UPC-A Disable UPC-A Enable/Disable UPC-E To enable or disable UPC-E, scan the appropriate bar code below. *Enable UPC-E Disable UPC-E 11 - 6 Symbol LS3578 Product Reference Guide Enable/Disable UPC-E1 To enable or disable UPC-E1, scan the appropriate bar code below. NOTE UPC-E1 is not a UCC (Uniform Code Council) approved symbology. Enable UPC-E1 *Disable UPC-E1 Enable/Disable EAN-13 To enable or disable EAN-13, scan the appropriate bar code below. *Enable EAN-13/JAN-13 Disable EAN-13/JAN-13 Symbologies 11 - 7 Enable/Disable EAN-8 To enable or disable EAN-8, scan the appropriate bar code below. *Enable EAN-8/JAN-8 Disable EAN-8/JAN-8 Enable/Disable Bookland EAN To enable or disable Bookland EAN, scan the appropriate bar code below. Enable Bookland EAN *Disable Bookland EAN NOTE If you enable Bookland EAN, select a Bookland ISBN Format on page 11-19. Also select either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable 978/979 Supplemental Mode in Decode UPC/EAN/JAN Supplementals on page 11-8.. 11 - 8 Symbol LS3578 Product Reference Guide Decode UPC/EAN/JAN Supplementals Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). The following options are available: • If you select Ignore UPC/EAN with Supplementals, and the scanner is presented with a UPC/EAN plus supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters. • If you select Decode UPC/EAN with Supplementals, the scanner only decodes UPC/EAN symbols with supplemental characters, and ignores symbols without supplementals. • If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols with supplemental characters immediately. If the symbol does not have a supplemental, the scanner must decode the bar code the number of times set via UPC/EAN/JAN Supplemental Redundancy on page 11-12 before transmitting its data to confirm that there is no supplemental. • If you select one of the following Supplemental Mode options, the scanner immediately transmits EAN-13 bar codes starting with that prefix that have supplemental characters. If the symbol does not have a supplemental, the scanner must decode the bar code the number of times set via UPC/EAN/JAN Supplemental Redundancy on page 11-12 before transmitting its data to confirm that there is no supplemental. The scanner transmits UPC/EAN bar codes that do not have that prefix immediately. • Enable 378/379 Supplemental Mode • Enable 978/979 Supplemental Mode NOTE If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see Enable/Disable Bookland EAN on page 11-7 to enable Bookland EAN, and select a format using Bookland ISBN Format on page 11-19. • Enable 977 Supplemental Mode • Enable 414/419/434/439 Supplemental Mode • Enable 491 Supplemental Mode • Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed previously. • Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit user-defined prefix. Set this 3-digit prefix using Supplemental User-Programmable 1. • Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either of two 3-digit user-defined prefixes. Set the 3-digit prefixes using Supplemental User-Programmable 1 and Supplemental User-Programmable 2. • Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any prefix listed previously or the user-defined prefix set using Supplemental User-Programmable 1. • Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with any prefix listed previously or one of the two user-defined prefixes set using Supplemental User-Programmable 1 and Supplemental User-Programmable 2. • Select Supplemental User-Programmable 1 to set a 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on page D-1. • Select Supplemental User-Programmable 2 to set a second 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on page D-1. NOTE To minimize the risk of invalid data transmission, select either to decode or ignore supplemental characters. Symbologies 11 - 9 Decode UPC/EAN/JAN Supplementals (continued) *Ignore UPC/EAN/JAN With Supplementals Decode UPC/EAN/JAN Only With Supplementals Autodiscriminate UPC/EAN/JAN Supplementals Enable 378/379 Supplemental Mode Enable 978/979 Supplemental Mode Enable 977 Supplemental Mode 11 - 10 Symbol LS3578 Product Reference Guide Decode UPC/EAN/JAN Supplementals (continued) Enable 414/419/434/439 Supplemental Mode Enable 491 Supplemental Mode Enable Smart Supplemental Mode Supplemental User-Programmable Type 1 Supplemental User-Programmable Type 1 and 2 Symbologies 11 - 11 Decode UPC/EAN/JAN Supplementals (continued) Smart Supplemental Plus User-Programmable 1 Smart Supplemental Plus User-Programmable 1 and 2 User-Programmable Supplementals If you selected a Supplemental User-Programmable option from Decode UPC/EAN/JAN Supplementals on page 11-8, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on page D-1. Select User-Programmable Supplemental 2 to set a second 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on page D-1 Supplemental User-Programmable 1 Supplemental User-Programmable 2 11 - 12 Symbol LS3578 Product Reference Guide UPC/EAN/JAN Supplemental Redundancy With Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times a symbol without supplementals is decoded before transmission. The range is from two to 30 times. 14 or above is recommended when decoding a mix of UPC/EAN symbols with and without supplementals, and the autodiscriminate option is selected. The default is set at 7. Scan the following bar code to set a decode redundancy value. Next, scan two numeric bar codes from Appendix D, Numeric Bar Codes. Use a leading zero for single digit numbers. In case of an error, or to change the selection, scan Cancel on page D-3. UPC/EAN/JAN Supplemental Redundancy Transmit UPC-A/UPC-E/UPC-E1 Check Digit The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code to transmit the bar code data with or without the UPC-A, UPC-E or UPC-E1 check digit. It is always verified to guarantee the integrity of the data. UPC-A Check Digit *Transmit UPC-A Check Digit Do Not Transmit UPC-A Check Digit Symbologies 11 - 13 UPC-E Check Digit *Transmit UPC-E Check Digit Do Not Transmit UPC-E Check Digit UPC-E1 Check Digit *Transmit UPC-E1 Check Digit Do Not Transmit UPC-E1 Check Digit 11 - 14 Symbol LS3578 Product Reference Guide UPC-A Preamble Preamble characters are part of the UPC symbol consisting of Country Code and System Character. There are three options for transmitting UPC-A preamble to the host device: • Transmit System Character only. • Transmit System Character and Country Code (“0” for USA). • No preamble transmitted. Select the appropriate option to match the host system. No Preamble () *System Character ( ) System Character & Country Code (< COUNTRY CODE> ) Symbologies 11 - 15 UPC-E Preamble Preamble characters are part of the UPC symbol consisting of Country Code and System Character. There are three options for transmitting UPC-E preamble to the host device: • Transmit System Character only. • Transmit System Character and Country Code (“0” for USA). • No preamble transmitted. Select the appropriate option to match the host system. No Preamble () *System Character ( ) System Character & Country Code (< COUNTRY CODE> ) 11 - 16 Symbol LS3578 Product Reference Guide UPC-E1 Preamble Preamble characters are part of the UPC symbol consisting of Country Code and System Character. There are three options for transmitting UPC-E1 preamble to the host device: • Transmit System Character only. • Transmit System Character and Country Code (“0” for USA). • No preamble transmitted. Select the appropriate option to match the host system. No Preamble () *System Character ( ) System Character & Country Code (< COUNTRY CODE> ) Symbologies 11 - 17 Convert UPC-E to UPC-A When enabled, UPC-E (zero suppressed) decoded data is converted to UPC-A format before transmission. After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). When disabled, UPC-E decoded data is transmitted as UPC-E data, without conversion. Convert UPC-E to UPC-A (Enable) *Do Not Convert UPC-E to UPC-A (Disable) Convert UPC-E1 to UPC-A When enabled, UPC-E1 decoded data is converted to UPC-A format before transmission. After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). When disabled, UPC-E1 decoded data is transmitted as UPC-E1 data, without conversion. Convert UPC-E1 to UPC-A (Enable) *Do Not Convert UPC-E1 to UPC-A (Disable) 11 - 18 Symbol LS3578 Product Reference Guide EAN-8/JAN-8 Extend When enabled, this parameter adds five leading zeros to decoded EAN-8 symbols to make them compatible in format to EAN-13 symbols. When disabled, EAN-8 symbols are transmitted as is. Enable EAN/JAN Zero Extend *Disable EAN/JAN Zero Extend Symbologies 11 - 19 Bookland ISBN Format If you enabled Bookland EAN using Enable/Disable Bookland EAN on page 11-7, select one of the following formats for Bookland data: • Bookland ISBN-10 - The scanner reports Bookland data starting with 978 in traditional 10-digit format with the special Bookland check digit for backward-compatibility. Data starting with 979 is not considered Bookland in this mode. • Bookland ISBN-13 - The scanner reports Bookland data (starting with either 978 or 979) as EAN-13 in 13-digit format to meet the 2007 ISBN-13 protocol. *Bookland ISBN-10 Bookland ISBN-13 NOTE For Bookland EAN to function properly, first enable Bookland EAN using Enable/Disable Bookland EAN on page 11-7, then select either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable 978/979 Supplemental Mode in Decode UPC/EAN/JAN Supplementals on page 11-8. 11 - 20 Symbol LS3578 Product Reference Guide UCC Coupon Extended Code When enabled, this parameter decodes UPC-A bar codes starting with digit ‘5’, EAN-13 bar codes starting with digit ‘99’, and UPC-A/EAN-128 Coupon Codes. UPCA, EAN-13, and EAN-128 must be enabled to scan all types of Coupon Codes. Enable UCC Coupon Extended Code *Disable UCC Coupon Extended Code NOTE Use the Decode UPC/EAN Supplemental Redundancy parameter to control autodiscrimination of the EAN128 (right half) of a coupon code. Symbologies 11 - 21 Code 128 Enable/Disable Code 128 To enable or disable Code 128, scan the appropriate bar code below. *Enable Code 128 Disable Code 128 11 - 22 Symbol LS3578 Product Reference Guide Enable/Disable UCC/EAN-128 To enable or disable UCC/EAN-128, scan the appropriate bar code below. *Enable UCC/EAN-128 Disable UCC/EAN-128 Enable/Disable ISBT 128 To enable or disable ISBT 128, scan the appropriate bar code below. *Enable ISBT 128 Disable ISBT 128 Symbologies 11 - 23 Code 39 Enable/Disable Code 39 To enable or disable Code 39, scan the appropriate bar code below. *Enable Code 39 Disable Code 39 Enable/Disable Trioptic Code 39 Trioptic Code 39 is a variant of Code 39 used in the marking of computer tape cartridges. Trioptic Code 39 symbols always contain six characters. To enable or disable Trioptic Code 39, scan the appropriate bar code below. Enable Trioptic Code 39 *Disable Trioptic Code 39 NOTE Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. 11 - 24 Symbol LS3578 Product Reference Guide Convert Code 39 to Code 32 Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. Scan the appropriate bar code below to enable or disable converting Code 39 to Code 32. NOTE Code 39 must be enabled for this parameter to function. Convert Code 39 to Code 32 (Enable) *Do Not Convert Code 39 to Code 32 (Disable) Code 32 Prefix Scan the appropriate bar code to enable or disable adding the prefix character “A” to all Code 32 bar codes. NOTE Convert Code 39 to Code 32 must be enabled for this parameter to function. Enable Code 32 Prefix *Disable Code 32 Prefix Symbologies 11 - 25 Set Lengths for Code 39 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for Code 39 may be set for any length, one or two discrete lengths, or lengths within a specific range. If Code 39 Full ASCII is enabled, Length Within a Range or Any Length are the preferred options. NOTE When setting lengths for different bar code types by scanning single digit numbers, the single digit number must always be preceded by a leading zero. One Discrete Length - This option allows the scanner to decode only those Code 39 symbols containing a selected length. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only Code 39 symbols with 14 characters, scan Code 39 - One Discrete Length, then scan 1 followed by 4. In case of an error, or to change the selection, scan Cancel on page D-3. Code 39 - One Discrete Length Two Discrete Lengths - This option allows the scanner to decode only those Code 39 symbols containing either of two selected lengths. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only those Code 39 symbols containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel on page D-3. Code 39 - Two Discrete Lengths Length Within Range - This option allows the scanner to decode a Code 39 symbol with a specific length range. The length range is selected from numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode Code 39 symbols containing between 4 and 12 characters, first scan Code 39 - Length Within Range. Then scan 0, 4, 1, and 2 (insert a leading zero for single digit numbers). In case of an error, or to change the selection, scan Cancel on page D-3. Code 39 - Length Within Range Any Length - This option allows the scanner to decode Code 39 symbols containing any number of characters within the scanner capability. Code 39 - Any Length 11 - 26 Symbol LS3578 Product Reference Guide Code 39 Check Digit Verification When this feature is enabled, the scanner checks the integrity of all Code 39 symbols to verify that the data complies with a specified check digit algorithm. Only those Code 39 symbols that include a modulo 43 check digit are decoded when this feature is enabled. This feature should only be enabled if the Code 39 symbols contain a Modulo 43 check digit. Enable Code 39 Check Digit *Disable Code 39 Check Digit Transmit Code 39 Check Digit Scan a bar code below to transmit Code 39 data with or without the check digit. Transmit Code 39 Check Digit (Enable) *Do Not Transmit Code 39 Check Digit (Disable) NOTE Code 39 Check Digit Verification must be enabled for this parameter to function. Symbologies 11 - 27 Code 39 Full ASCII Conversion Code 39 Full ASCII is a variant of Code 39 that pairs characters to encode the full ASCII character set. To enable or disable Code 39 Full ASCII, scan the appropriate bar code below. See Table 6-2 on page 6-14 and for the mapping of Code 39 characters to ASCII values. Enable Code 39 Full ASCII *Disable Code 39 Full ASCII NOTE Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. NOTE Code 39 Full ASCII to Full ASCII Correlation is host-dependent, and is described in the ASCII Character Set table for the appropriate interface. For keyboard wedge host conversion, see Table 6-2 on page 6-14. For RS-232 host conversion, see Table 7-4 on page 7-20. For USB host conversion, see Table 8-2 on page 8-13. 11 - 28 Symbol LS3578 Product Reference Guide Code 93 Enable/Disable Code 93 To enable or disable Code 93, scan the appropriate bar code below. Enable Code 93 *Disable Code 93 Set Lengths for Code 93 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for Code 93 may be set for any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - This option allows the scanner to decode only those Code 93 symbols containing a selected length. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only Code 93 symbols with 14 characters, scan Code 93 - One Discrete Length, then scan 1 followed by 4. In case of an error, or to change the selection, scan Cancel on page D-3. Code 93 - One Discrete Length Symbologies 11 - 29 Set Lengths for Code 93 (continued) Two Discrete Lengths - This option allows the scanner to decode only those Code 93 symbols containing either of two selected lengths. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only those Code 93 symbols containing either 2 or 14 characters, select Code 93 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel on page D-3. Code 93 - Two Discrete Lengths Length Within Range - This option allows the scanner to decode a Code 93 symbol with a specific length range. The length range is selected from numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode Code 93 symbols containing between 4 and 12 characters, first scan Code 93 - Length Within Range. Then scan 0, 4, 1, and 2 (insert a leading zero for single digit numbers). In case of an error, or to change the selection, scan Cancel on page D-3. Code 93 - Length Within Range Any Length - This option allows the scanner to decode Code 93 symbols containing any number of characters within the scanner’s capability. Code 93 - Any Length 11 - 30 Symbol LS3578 Product Reference Guide Code 11 Code 11 To enable or disable Code 11, scan the appropriate bar code below. Enable Code 11 *Disable Code 11 Symbologies 11 - 31 Set Lengths for Code 11 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for Code 11 may be set for any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - This option allows the scanner to decode only those Code 11 symbols containing a selected length. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only Code 11 symbols with 14 characters, scan Code 11 - One Discrete Length, then scan 1 followed by 4. In case of an error, or to change the selection, scan Cancel on page D-3. Code 11 - One Discrete Length Two Discrete Lengths - This option allows the scanner to decode only those Code 11 symbols containing either of two selected lengths. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only those Code 11 symbols containing either 2 or 14 characters, select Code 11 Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel on page D-3. Code 11 - Two Discrete Lengths Length Within Range - This option allows the scanner to decode a Code 11 symbol with a specific length range. The length range is selected from numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode Code 11 symbols containing between 4 and 12 characters, first scan Code 11 - Length Within Range. Then scan 0, 4, 1, and 2 (insert a leading zero for single digit numbers). In case of an error, or to change the selection, scan Cancel on page D-3. Code 11 - Length Within Range Any Length - This option allows the scanner to decode Code 11 symbols containing any number of characters within the scanner capability. Code 11 - Any Length 11 - 32 Symbol LS3578 Product Reference Guide Code 11 Check Digit Verification This feature allows the scanner to check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit algorithm. This selects the check digit mechanism for the decoded Code 11 bar code. The options are to check for one check digit, check for two check digits, or disable the feature. To enable this feature, scan the bar code below corresponding to the number of check digits encoded in the Code 11 symbols. Disable * One Check Digit Two Check Digits Symbologies 11 - 33 Transmit Code 11 Check Digits This feature selects whether or not to transmit the Code 11 check digit(s). Transmit Code 11 Check Digit(s) (Enable) *Do Not Transmit Code 11 Check Digit(s) (Disable) NOTE Code 11 Check Digit Verification must be enabled for this parameter to function. 11 - 34 Symbol LS3578 Product Reference Guide Interleaved 2 of 5 (I 2 of 5) Enable/Disable Interleaved 2 of 5 To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5 length from the following pages. *Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 Set Lengths for Interleaved 2 of 5 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for I 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - This option allows the scanner to decode only those I 2 of 5 symbols containing a selected length. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only I 2 of 5 symbols with 14 characters, scan I 2 of 5 - One Discrete Length, then scan 1 followed by 4. In case of an error, or to change the selection, scan Cancel on page D-3. I 2 of 5 - One Discrete Length Two Discrete Lengths - This option allows the scanner to decode only those I 2 of 5 symbols containing either of two selected lengths. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only those I 2 of 5 symbols containing either 2 or 14 characters, select I 2 of 5 Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel on page D-3. I 2 of 5 - Two Discrete Lengths Symbologies 11 - 35 Set Lengths for Interleaved 2 of 5 (continued) Length Within Range - This option allows the scanner to decode an I 2 of 5 symbol with a specific length range. The length range is selected from numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode I 2 of 5 symbols containing between 4 and 12 characters, first scan I 2 of 5 - Length Within Range. Then scan 0, 4, 1, and 2 (insert a leading zero for single digit numbers). In case of an error, or to change the selection, scan Cancel on page D-3. I 2 of 5 - Length Within Range Any Length - This option allows the scanner to decode I 2 of 5 symbols containing any number of characters within the scanner capability. NOTE Due to the construction of the I 2 of 5 symbology, it is possible for a scan line covering only a portion of the code to be interpreted as a complete scan, yielding less data than is actually encoded in the bar code. To prevent this from happening, select specific lengths (I 2 of 5 - One Discrete Length - Two Discrete Lengths) for I 2 of 5 applications. I 2 of 5 - Any Length 11 - 36 Symbol LS3578 Product Reference Guide I 2 of 5 Check Digit Verification When this feature is enabled, the scanner checks the integrity of all I 2 of 5 symbols to verify that the data complies with either the specified Uniform Symbology Specification (USS), or the Optical Product Code Council (OPCC) check digit algorithm. *Disable USS Check Digit OPCC Check Digit Transmit I 2 of 5 Check Digit Scan the appropriate bar code below to transmit I 2 of 5 data with or without the check digit. Transmit I 2 of 5 Check Digit (Enable) *Do Not Transmit I 2 of 5 Check Digit (Disable) Symbologies 11 - 37 Convert I 2 of 5 to EAN-13 This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. In order to accomplish this, the I 2 of 5 code must be enabled, and the code must have a leading zero and a valid EAN-13 check digit. Scanning a single bar code below, Convert I 2 of 5 to EAN-13 (Enable), accomplishes this function. Convert I 2 of 5 to EAN-13 (Enable) *Do Not Convert I 2 of 5 to EAN-13 (Disable) Discrete 2 of 5 (D 2 of 5) Enable/Disable Discrete 2 of 5 To enable or disable Discrete 2 of 5, scan the appropriate bar code below. Enable Discrete 2 of 5 *Disable Discrete 2 of 5 11 - 38 Symbol LS3578 Product Reference Guide Set Lengths for Discrete 2 of 5 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - This option allows the scanner to decode only those D 2 of 5 symbols containing a selected length. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only D 2 of 5 symbols with 14 characters, scan D 2 of 5 - One Discrete Length, then scan 1 followed by 4. In case of an error, or to change the selection, scan Cancel on page D-3. D 2 of 5 - One Discrete Length Two Discrete Lengths - This option allows the scanner to decode only those D 2 of 5 symbols containing either of two selected lengths. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only those D 2 of 5 symbols containing either 2 or 14 characters, select D 2 of 5 Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel on page D-3. D 2 of 5 - Two Discrete Lengths Length Within Range - This option allows the scanner to decode a D 2 of 5 symbol with a specific length range. The length range is selected from numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode D 2 of 5 symbols containing between 4 and 12 characters, first scan D 2 of 5 - Length Within Range. Then scan 0, 4, 1, and 2 (insert a leading zero for single digit numbers). In case of an error, or to change the selection, scan Cancel on page D-3. D 2 of 5 - Length Within Range Any Length - This option allows the scanner to decode D 2 of 5 symbols containing any number of characters within the scanner capability. NOTE Due to the construction of the D 2 of 5 symbology, it is possible for a scan line covering only a portion of the code to be interpreted as a complete scan, yielding less data than is actually encoded in the bar code. To prevent this from happening, select specific lengths (D 2 of 5 - One Discrete Length - Two Discrete Lengths) for D 2 of 5 applications. D 2 of 5 - Any Length Symbologies 11 - 39 Codabar (NW - 7) Enable/Disable Codabar To enable or disable Codabar, scan the appropriate bar code below. Enable Codabar *Disable Codabar 11 - 40 Symbol LS3578 Product Reference Guide Set Lengths for Codabar The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for Codabar may be set for any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - This option allows the scanner to decode only those Codabar symbols containing a selected length. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only Codabar symbols with 14 characters, scan Codabar - One Discrete Length, then scan 1 followed by 4. In case of an error, or to change the selection, scan Cancel on page D-3. Codabar - One Discrete Length Two Discrete Lengths - This option allows the scanner to decode only those Codabar symbols containing either of two selected lengths. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only those Codabar symbols containing either 2 or 14 characters, select Codabar - Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel on page D-3. Codabar - Two Discrete Lengths Length Within Range - This option allows the scanner to decode a Codabar symbol with a specific length range. The length range is selected from numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode Codabar symbols containing between 4 and 12 characters, first scan Codabar - Length Within Range. Then scan 0, 4, 1, and 2 (insert a leading zero for single digit numbers). In case of an error, or to change the selection, scan Cancel on page D-3. Codabar - Length Within Range Any Length - This option allows the scanner to decode Codabar symbols containing any number of characters within the scanner capability. Codabar - Any Length Symbologies 11 - 41 CLSI Editing When enabled, this parameter strips the start and stop characters and inserts a space after the first, fifth, and tenth characters of a 14-character Codabar symbol. Enable this feature if the host system requires this data format. NOTE Symbol length does not include start and stop characters. Enable CLSI Editing *Disable CLSI Editing NOTIS Editing When enabled, this parameter strips the start and stop characters from a decoded Codabar symbol. Enable this feature if the host system requires this data format. Enable NOTIS Editing *Disable NOTIS Editing 11 - 42 Symbol LS3578 Product Reference Guide MSI Enable/Disable MSI To enable or disable MSI, scan the appropriate bar code below. Enable MSI *Disable MSI Symbologies 11 - 43 Set Lengths for MSI The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for MSI may be set for any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - This option allows the scanner to decode only those MSI symbols containing a selected length. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only MSI symbols with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by 4. In case of an error, or to change the selection, scan Cancel on page D-3. MSI - One Discrete Length Two Discrete Lengths - This option allows the scanner to decode only those MSI symbols containing either of two selected lengths. Lengths are selected from the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only those MSI symbols containing either 2 or 14 characters, select MSI - Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel on page D-3. MSI - Two Discrete Lengths Length Within Range - This option allows the scanner to decode an MSI symbol with a specific length range. The length range is selected from numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode MSI symbols containing between 4 and 12 characters, first scan MSI - Length Within Range. Then scan 0, 4, 1, and 2 (insert a leading zero for single digit numbers). In case of an error, or to change the selection, scan Cancel on page D-3. MSI - Length Within Range 11 - 44 Symbol LS3578 Product Reference Guide Set Lengths for MSI (continued) Any Length - This option allows the scanner to decode MSI symbols containing any number of characters within the scanner capability. NOTE Due to the construction of the MSI symbology, it is possible for a scan line covering only a portion of the code to be interpreted as a complete scan, yielding less data than is actually encoded in the bar code. To prevent this from happening, select specific lengths (MSI - One Discrete Length - Two Discrete Lengths) for MSI applications. MSI - Any Length MSI Check Digits With MSI symbols, one check digit is mandatory and always verified by the reader. The second check digit is optional. If the MSI codes include two check digits, enable the verification of the second check digit by scanning the bar code below. See MSI Check Digit Algorithm on page 11-45 for the selection of second digit algorithms. *One MSI Check Digit Two MSI Check Digits Symbologies 11 - 45 Transmit MSI Check Digit(s) Scan a bar code below to transmit MSI data with or without the check digit. Transmit MSI Check Digit(s) (Enable) *Do Not Transmit MSI Check Digit(s) (Disable) MSI Check Digit Algorithm Two algorithms are possible for the verification of the second MSI check digit. Select the bar code below corresponding to the algorithm used to encode the check digit. MOD 10/MOD 11 *MOD 10/MOD 10 11 - 46 Symbol LS3578 Product Reference Guide GS1 DataBar The variants of GS1 DataBar are GS1 DataBar-14, GS1 DataBar Expanded, and GS1 DataBar Limited. The limited and expanded versions have stacked variants. Scan the appropriate bar code below to enable or disable each variant of GS1 DataBar. GS1 DataBar-14 Enable GS1 DataBar-14 *Disable GS1 DataBar-14 GS1 DataBar Limited Enable GS1 DataBar Limited *Disable GS1 DataBar Limited Symbologies 11 - 47 GS1 DataBar Expanded Enable GS1 DataBar Expanded *Disable GS1 DataBar Expanded Convert GS1 DataBar to UPC/EAN This parameter only applies to GS1 DataBar-14 and GS1 DataBar Limited symbols not decoded as part of a composite symbol. When this conversion is enabled, GS1 DataBar-14 and GS1 DataBar Limited symbols encoding a single zero as the first digit have the leading '010' stripped and the bar code reported as EAN-13. Bar codes beginning with two or more zeros but not six zeros have the leading '0100' stripped and the bar code reported as UPC-A. The UPC-A Preamble parameter to transmit the system character and country code applies to converted bar codes. Note that neither the system character nor the check digit can be stripped. Enable Convert GS1 DataBar to UPC/EAN *Disable Convert GS1 DataBar to UPC/EAN 11 - 48 Symbol LS3578 Product Reference Guide Redundancy Level The scanner offers four levels of decode redundancy. Select higher redundancy levels for lower quality bar codes. As redundancy levels increase, the scanner’s aggressiveness decreases. Select the redundancy level appropriate for the bar code quality. Redundancy Level 1 The following code types must be successfully read twice before being decoded: Code Type Code Length Codabar 8 characters or less MSI 4 characters or less D 2 of 5 8 characters or less I 2 of 5 8 characters or less *Redundancy Level 1 Redundancy Level 2 All code types must be successfully read twice before being decoded. Redundancy Level 2 Symbologies 11 - 49 Redundancy Level 3 Code types other than the following must be successfully read twice before being decoded. The following codes must be read three times: Code Type Code Length MSI Plessey 4 characters or less D 2 of 5 8 characters or less I 2 of 5 8 characters or less Codabar 8 characters or less Redundancy Level 3 Redundancy Level 4 All code types must be successfully read three times before being decoded. Redundancy Level 4 11 - 50 Symbol LS3578 Product Reference Guide Security Level The scanner offers four levels of decode security for UPC/EAN bar codes. Select higher security levels for lower quality bar codes. There is an inverse relationship between security and scanner decode speed, so be sure to choose only that level of security necessary for any given application. Security Level 0 This default setting allows the scanner to operate fastest, while providing sufficient security in decoding “in-spec” UPC/EAN bar codes. *Security Level 0 Security Level 1 As bar code quality levels diminish, certain characters become prone to misdecodes before others (i.e., 1, 2, 7, 8). If the scanner is misdecoding poorly printed bar codes, and the misdecodes are limited to these characters, select this security level. Security Level 1 Security Level 2 If the scanner is misdecoding poorly printed bar codes, and the misdecodes are not limited to characters 1, 2, 7, and 8, select this security level. Security Level 2 Symbologies 11 - 51 Security Level 3 If the scanner is still misdecoding, select this security level. Be advised, selecting this option is an extreme measure against misdecoding severely out of spec bar codes. Selecting this level of security can significantly impair the decoding ability of the scanner. If this level of security is necessary, try to improve the quality of the bar codes. Security Level 3 Bi-directional Redundancy Use Bi-directional Redundancy for added security for linear code type security levels. When enabled, a bar code must be successfully scanned in both directions (forward and reverse) before reporting a good decode. Enable Bi-directional Redundancy *Disable Bi-directional Redundancy 11 - 52 Symbol LS3578 Product Reference Guide Chapter 12 Advanced Data Formatting Introduction Advanced Data Formatting (ADF) is a means of customizing data before transmission to the host device. Scan data can be edited to suit particular requirements. ADF can be implemented through scanning a related series of bar codes, which begin on page 12-5, or by installing the 123Scan utility (see Chapter 10, 123Scan) which allows the digital imager scanner to be setup and programmed with Advanced Data Formatting (ADF) Rules. Avoid using ADF formatting with bar codes containing more than 60 characters. To add a prefix or suffix value for such bar codes, use Add Prefix/Suffix setting. Using ADF with longer bar codes transmits the bar code in segments of length 252 or less (depending on the host selected), and applies the rule to each segment Rules: Criteria Linked to Actions In ADF, data is customized through rules. These rules perform detailed actions when the data meets certain criteria. One rule may consist of single or multiple criteria applied to single or multiple actions. For instance, a data formatting rule could be the following: Criteria: When scan data is Code 39, length 12, and data at the start position is the string “129”, Actions: pad all sends with zeros to length 8, send all data up to X, send a space. If a Code 39 bar code of 1299X1559828 is scanned, the following is transmitted: 00001299 . If a Code 39 bar code of 1299X15598 is scanned, this rule is ignored because the length criteria has not been met. The rule specifies the editing conditions and requirements before data transmission occurs. 12 - 2 Symbol LS3578 Product Reference Guide Using ADF Bar Codes When programming a rule, make sure the rule is logically correct. Plan ahead before scanning. To program each data formatting rule: • Start the Rule. Scan the Begin New Rule bar code on page 12-5. • Criteria. Scan the bar codes for all pertinent criteria. Criteria can include code type (e.g., Code 128), code length, or data that contains a specific character string (e.g., the digits “129”). These options are described in Criteria on page 12-8. • Actions. Scan all actions related to, or affecting, these criteria. The actions of a rule specify how to format the data for transmission. These options are described in ADF Bar Code Menu Example on page 12-2. • Save the Rule. Scan the Save Rule bar code on page 12-5. This places the rule in the “top” position in the rule buffer. • Some special-purpose bar codes can be useful to correct errors during this process: Erase Criteria and Start Again, Erase Actions and Start Again, Erase Previously Saved Rule, etc. Criteria, actions, and entire rules may be erased by scanning the appropriate bar code (see page 12-6). Beeper Definitions on page 2-1 guide through the programming steps. ADF Bar Code Menu Example This section provides an example of how ADF rules are entered and used for scan data. An auto parts distribution center wants to encode manufacturer ID, part number, and destination code into their own Code 128 bar codes. The distribution center also has products that carry UPC bar codes, placed there by the manufacturer. The Code 128 bar codes have the following format: MMMMMPPPPPDD Where: M = Manufacturer ID P = Part Number D = Destination Code The distribution center uses a PC with dedicated control characters for manufacturer ID , part number , and destination code . At this center the UPC data is treated as manufacturer ID code. The following rules need to be entered: When scanning data of code type Code 128, send the next 5 characters, send the manufacturer ID key , send the next 5 characters, send the part number key , send the next 2 characters, send the destination code key . When scanning data of code type UPC/EAN, send all data, send the manufacturer ID key . To enter these rules, follow the steps below: Advanced Data Formatting 12 - 3 Rule 1: The Code 128 Scanning Rule Step Bar Code On Page Beep Indication 1 Begin New Rule 12-5 High High 2 Code 128 12-8 High High 3 Send next 5 characters 12-22 High High 4 Send 12-44 High High 5 Send next 5 characters 12-22 High High 6 Send 12-44 High High 7 Send next 2 characters 12-21 High High 8 Send 12-42 High High 9 Save Rule 12-5 High Low High Low Rule 2: The UPC Scanning Rule Step Bar Code On Page Beep Indication 1 Begin New Rule 12-5 High High 2 UPC/EAN 12-9 High High 3 Send all remaining data 12-21 High High 4 Send 12-44 High High 5 Save Rule 12-5 High Low High Low To correct any errors made while entering this rule, scan the Quit Entering Rules bar code on page 12-6. If the rule is already saved, scan the Erase Previously Saved Rule bar code on page 12-6. Alternate Rule Sets ADF rules may be grouped into one of four alternate sets which can be turned on and off when needed. This is useful to format the same message in different ways. For example, a Code 128 bar code contains the following information: Class (2 digits), Stock Number (8) digits, Price (5 digits) The bar code might look like this: 245671243701500 where: Class = 24 Stock Number = 56712437 Price = 01500 Ordinarily, data is sent as follows: 24 (class key) 56712437 (stock key) 01500 (enter key) But, when there is a sale, send only the following: 24 (class key) 56712437 (stock key) 12 - 4 Symbol LS3578 Product Reference Guide and the cashier will key the price manually. To implement this, first enter an ADF rule that applies to the normal situation, such as: Scan Rule Belongs to Set 1. When scanning a bar code of length 15, send the next 2 characters, send the class key, send the next 8 characters, send the stock key, send the data that remains, send the Enter key. The “sale” rule may look like this: Scan Rule Belongs to Set 2. When scanning a bar code of length 15, send the next 2 characters, send the class key, send the next 8 characters, send the stock key. To switch between the two sets of rules, a “switching rule” must be programmed. This rule specifies what type of bar code must be scanned to switch between the rule sets. For example, in the case of the “sale” rule above, the rule programmer wants the cashier to scan the bar code “M” before a sale. To do this, a rule can be entered as follows: When scanning a bar code of length 1 that begins with “M”, select rule set number 1. Another rule could be programmed to switch back. When scanning a bar code of length 1 that begins with “N”, turn off rule set number 1. The switching back to normal rules can also be done in the “sale” rule. For example, the rule may look like this: When scanning a bar code of length 15, send the next 2 characters, send the class key, send the next 8 characters, send the stock key, turn off rule set 1. For optimal results, scan the Disable All Rule Sets bar code on page 12-7 after programming a rule belonging to an alternate rule set. In addition to enabling and disabling rule sets within the rules, enable or disable them by scanning the appropriate bar codes on page 12-7. Rules Hierarchy (in Bar Codes) The order of programming individual rules is important.The most general rule should be programmed first. All programmed rules are stored in a buffer. As they are programmed, they are stored at the “top” of a rules list. If three rules have been created, the list would be configured as follows: Third Rule Second Rule First Rule When data is scanned, the rules list is checked from top to bottom to determine if the criteria matches (and therefore, if the actions should occur). Input is modified into the data format specified by the first matching set of criteria it finds. Be sure to program the most general rule last. For example, if the THIRD rule states: When scanning a bar code of any length, send all data, then send the ENTER key. And the SECOND rule states: When scanning a Code 128 bar code of length 12, send the first four characters, then send the ENTER key, then send all remaining data. If a Code 128 bar code of length 12 were scanned, the THIRD rule would be in effect. The SECOND rule would appear to not function. Advanced Data Formatting 12 - 5 Note also that ADF rules are actually created when using the standard data editing functions. Scan options are entered as ADF rules, and the hierarchy mentioned above also applies to them. For the digital imager scanner, this applies to prefix/suffix programming in the parameter Scan Data Transmission Format. These rules reside in the same “rule list” as ADF Rules, so the order of their creation is also important. Default Rules Every unit has a default rule to send all scan data. Units with custom software may have one or more default rules burned in. The rules hierarchy checks user programmable rules first, then the default rules. Default rules can be disabled by entering the following general rule in the user programmable buffer: When receiving scan data, send all data. Since this rule always applies, ADF will never go into the default rules. Special Commands Pause Duration This parameter, along with the Send Pause parameter on page 12-25, allows a pause to be inserted in the data transmission. Pauses are set by scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second intervals. For example, scanning bar codes “0” and “1” inserts a 0.1 second pause; “0” and “5” inserts a 0.5 second delay. See Appendix D, Numeric Bar Codes. To correct an error or change a selection, scan Cancel on page D-3. Pause Duration Begin New Rule Scan the bar code below to start entering a new rule . Begin New Rule Save Rule Scan the bar code below to save the rule. Save Rule 12 - 6 Symbol LS3578 Product Reference Guide Erase Use these bar codes to erase criteria, actions, or rules. Erase Criteria And Start Again Erase Actions And Start Again Erase Previously Saved Rule Erase All Rules Quit Entering Rules Scan the bar code below to quit entering rules. Quit Entering Rules Advanced Data Formatting 12 - 7 Disable Rule Set Use these bar codes to disable rule sets. Disable Rule Set 1 Disable Rule Set 2 Disable Rule Set 3 Disable Rule Set 4 Disable All Rule Sets 12 - 8 Symbol LS3578 Product Reference Guide Criteria Code Types Select any number of code types to be affected. All selected codes must be scanned in succession, prior to selecting other criteria. To select all code types, do not scan any code type. Scan the bar codes for all code types desired before selecting other criteria. Code 39 Codabar GS1 DataBar-14 GS1 DataBar Limited GS1 DataBar Expanded Code 128 D 2 OF 5 Advanced Data Formatting 12 - 9 Code Types (continued) IATA 2 OF 5 I 2 OF 5 Code 93 UPC-A UPC-E EAN-8 EAN-13 12 - 10 Symbol LS3578 Product Reference Guide Code Types (continued) MSI UCC/EAN 128 UPC-E1 Bookland EAN Trioptic Code 39 Code 11 ISBT 128 Advanced Data Formatting 12 - 11 Code Types (continued) ISBT 128 Coupon Code 12 - 12 Symbol LS3578 Product Reference Guide Code Lengths Define the number of characters the selected code type must contain. Do not select any code length to select code types of any length. Scan these bar codes to define the number of characters the selected code types must contain. Select one length per rule only. 1 Character 2 Characters 3 Characters 4 Characters 5 Characters 6 Characters Advanced Data Formatting 12 - 13 Code Lengths (continued) 7 Characters 8 Characters 9 Characters 10 Characters 11 Characters 12 Characters 13 Characters 12 - 14 Symbol LS3578 Product Reference Guide Code Lengths (continued) 14 Characters 15 Characters 16 Characters 17 Characters 18 Characters 19 Characters 20 Characters Advanced Data Formatting 12 - 15 Code Lengths (continued) 21 Characters 22 Characters 23 Characters 24 Characters 25 Characters 26 Characters 27 Characters 12 - 16 Symbol LS3578 Product Reference Guide Code Lengths (continued) 28 Characters 29 Characters 30 Characters Message Containing A Specific Data String Use this feature to select whether the formatting affects data that begins with a specific character or data string, or contains a specific character or data string. There are 4 features: • Specific String at Start • Specific String, Any Location • Any Message OK • Rule Belongs to Set Specific String at Start Scan the bar code below, then scan the bar codes representing the desired character or characters (up to a total of 8) in the Alphanumeric Keyboard on page 12-86. After scanning the following bar code: 1. Enter a string using the Alphanumeric Keyboard on page 12-86. 2. Scan End of Message bar code on page 12-95. Specific String At Start Advanced Data Formatting 12 - 17 Specific String, Any Location Scan the bar code below, then, using the Numeric Keypad on page 12-18, scan a two-digit number representing the position (use a leading “zero” if necessary). Then scan the desired character or characters (up to a total of 8) on the Alphanumeric Keyboard on page 12-86, followed by the End of Message bar code on page 12-95. After scanning the following bar code: 1. Enter a location using the Numeric Keypad on page 12-18. 2. Enter a string using the Alphanumeric Keyboard on page 12-86. 3. Scan End of Message bar code on page 12-95. Specific String Any Location Any Message OK By not scanning any bar code, all selected code types are formatted, regardless of information contained. 12 - 18 Symbol LS3578 Product Reference Guide Numeric Keypad Bar codes on this page should not be confused with those on the alphanumeric keyboard. 0 1 2 3 4 5 6 Advanced Data Formatting 12 - 19 Numeric Keypad (continued) 7 8 9 Cancel 12 - 20 Symbol LS3578 Product Reference Guide Rule Belongs To Set Select the set a rule belongs to. (There are four possible rule sets.) See Alternate Rule Sets on page 12-3 for more information about rule sets. Scan a bar code below to select which set a rule belongs to. Rule Belongs To Set 1 Rule Belongs To Set 2 Rule Belongs To Set 3 Rule Belongs To Set 4 Advanced Data Formatting 12 - 21 Actions Select how to format the data for transmission. Send Data Send all data that follows, send all data up to a specific character selected from the Alphanumeric Keyboard on page 12-86, or send the next X characters. Note that only bar codes for Send Next 1 to 20 appear here, and can be scanned multiple times to send values greater then 20. For instance, to send the next 28 characters, scan Send Next 20 Characters, then Send Next 8 Characters. Send Data Up To Character Send All Data That Remains Send Next Character Send Next 2 Characters Send Next 3 Characters Send Next 4 Characters 12 - 22 Symbol LS3578 Product Reference Guide Send Data (continued) Send Next 5 Characters Send Next 6 Characters Send Next 7 Characters Send Next 8 Characters Send Next 9 Characters Send Next 10 Characters Send Next 11 Characters Advanced Data Formatting 12 - 23 Send Data (continued) Send Next 12 Characters Send Next 13 Characters Send Next 14 Characters Send Next 15 Characters Send Next 16 Characters Send Next 17 Characters Send Next 18 Characters 12 - 24 Symbol LS3578 Product Reference Guide Send Data (continued) Send Next 19 Characters Send Next 20 Characters Setup Field(s) Table 12-1 Setup Field(s) Definitions Parameter Description Page Move Cursor 12-25 Move Cursor To a Character Scan the Move Cursor To Character on page 12-25, then any printable ASCII character from the Alphanumeric Keyboard on page 12-86. When this is used, the cursor moves to the position after the matching character. If the character is not there, the rule fails and ADF tries the next rule. Move Cursor to Start of Data Scan this bar code to move cursor to the beginning of the data. 12-25 12-25 Move Cursor Past a Character This parameter moves the cursor past all sequential occurrences of a selected character. For example, if the selected character is ‘A’, then the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan the Move Cursor Past Character on page 12-25, then select a character from the Alphanumeric Keyboard on page 12-86. If the character is not there, the cursor does not move (i.e., has no effect). Skip Ahead “N” Characters Scan one of these bar codes to select the number of positions ahead to move the cursor. 12-26 Skip Back “N” Characters Scan one of these bar codes to select the number of positions back to move the cursor. 12-28 12-28 Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code. These values must be set using the prefix/suffix values in Table 7-4 on page 7-20. Value 1 = Scan Suffix Value 2 = Scan Prefix Values 3-6 are not applicable Advanced Data Formatting 12 - 25 Move Cursor Scan a bar code below to move the cursor in relation to a specified character. Then enter a character by scanning a bar code from the Alphanumeric Keyboard on page 12-86. NOTE If there is no match when the rule is interpreted and the rule fails, the next rule is checked. Move Cursor To Character Move Cursor To Start Move Cursor Past Character Send Pause Scan the bar code below to insert a pause in the transmission of data. The length of this pause is controlled by the value of the Pause Duration parameter. Send Pause 12 - 26 Symbol LS3578 Product Reference Guide Skip Ahead Use the following bar codes to skip ahead characters. Skip Ahead 1 Character Skip Ahead 2 Characters Skip Ahead 3 Characters Skip Ahead 4 Characters Skip Ahead 5 Characters Skip Ahead 6 Characters Advanced Data Formatting 12 - 27 Skip Ahead (continued) Skip Ahead 7 Characters Skip Ahead 8 Characters Skip Ahead 9 Characters Skip Ahead 10 Characters 12 - 28 Symbol LS3578 Product Reference Guide Skip Back Use the following bar codes to skip back characters. Skip Back 1 Character Skip Back 2 Characters Skip Back 3 Characters Skip Back 4 Characters Skip Back 5 Characters Skip Back 6 Characters Advanced Data Formatting 12 - 29 Skip Back (continued) Skip Back 7 Characters Skip Back 8 Characters Skip Back 9 Characters Skip Back 10 Characters Send Preset Value Use these bar codes to send preset values. These values must be set using the Scan Prefix and Scan Suffix bar codes on page 5-12. Send Prefix Send Suffix 12 - 30 Symbol LS3578 Product Reference Guide Modify Data Modify data in the ways listed. The following actions work for all send commands that follow it within a rule. Programming pad zeros to length 6, send next 3 characters, stop padding, send next 5 characters, adds three zeros to the first send, and the next send is unaffected by the padding. These options do not apply to the Send Keystroke or Send Preset Value options. Remove All Spaces To remove all spaces in the send commands that follow, scan the bar code below. Remove All Spaces Crunch All Spaces To leave one space between words, scan the bar code below. This also removes all leading and trailing spaces. Crunch All Spaces Stop Space Removal Scan the bar code below to disable space removal. Stop Space Removal Remove Leading Zeros Scan the bar code below to remove all leading zeros. Remove Leading Zeros Stop Zero Removal Scan the bar code below to disable the removal of zeros. Stop Zero Removal Advanced Data Formatting 12 - 31 Pad Data with Spaces To pad data to the left, scan the bar code containing the desired number of spaces. This parameter is activated by Send commands. Pad Spaces To Length 1 Pad Spaces To Length 2 Pad Spaces To Length 3 Pad Spaces To Length 4 Pad Spaces To Length 5 Pad Spaces To Length 6 Pad Spaces To Length 7 12 - 32 Symbol LS3578 Product Reference Guide Pad Data with Spaces (continued) Pad Spaces To Length 8 Pad Spaces To Length 9 Pad Spaces To Length 10 Pad Spaces To Length 11 Pad Spaces To Length 12 Pad Spaces To Length 13 Pad Spaces To Length 14 Advanced Data Formatting 12 - 33 Pad Data with Spaces (continued) Pad Spaces To Length 15 Pad Spaces To Length 16 Pad Spaces To Length 17 Pad Spaces To Length 18 Pad Spaces To Length 19 Pad Spaces To Length 20 Pad Spaces To Length 21 12 - 34 Symbol LS3578 Product Reference Guide Pad Data with Spaces (continued) Pad Spaces To Length 22 Pad Spaces To Length 23 Pad Spaces To Length 24 Pad Spaces To Length 25 Pad Spaces To Length 26 Pad Spaces To Length 27 Pad Spaces To Length 28 Advanced Data Formatting 12 - 35 Pad Data with Spaces (continued) Pad Spaces To Length 29 Pad Spaces To Length 30 Stop Pad Spaces 12 - 36 Symbol LS3578 Product Reference Guide Pad Data with Zeros To pad data to the left, scan the bar code containing the desired number of zeros. This parameter is activated by Send commands. Pad Zeros To Length 1 Pad Zeros To Length 2 Pad Zeros To Length 3 Pad Zeros To Length 4 Pad Zeros To Length 5 Pad Zeros To Length 6 Advanced Data Formatting 12 - 37 Pad Data with Zeros (continued) Pad Zeros To Length 7 Pad Zeros To Length 8 Pad Zeros To Length 9 Pad Zeros To Length 10 12 - 38 Symbol LS3578 Product Reference Guide Pad Data with Zeros (continued) Pad Zeros To Length 11 Pad Zeros To Length 12 Pad Zeros To Length 13 Pad Zeros To Length 14 Pad Zeros To Length 15 Pad Zeros To Length 16 Pad Zeros To Length 17 Advanced Data Formatting 12 - 39 Pad Data with Zeros (continued) Pad Zeros To Length 18 Pad Zeros To Length 19 Pad Zeros To Length 20 Pad Zeros To Length 21 Pad Zeros To Length 22 Pad Zeros To Length 23 Pad Zeros To Length 24 12 - 40 Symbol LS3578 Product Reference Guide Pad Data with Zeros (continued) Pad Zeros To Length 25 Pad Zeros To Length 26 Pad Zeros To Length 27 Pad Zeros To Length 28 Pad Zeros To Length 29 Pad Zeros To Length 30 Stop Pad Zeros Advanced Data Formatting 12 - 41 Beeps Select a beep sequence for each ADF rule. Beep Once Beep Twice Beep Three Times 12 - 42 Symbol LS3578 Product Reference Guide Send Keystroke (Control Characters and Keyboard Characters) Control Characters Scan the “Send __” bar code for the keystroke to send Send Control 2 Send Control A Send Control B Send Control C Send Control D Send Control E Advanced Data Formatting 12 - 43 Control Characters (continued) Send Control F Send Control G Send Control H Send Control I Send Control J Send Control K 12 - 44 Symbol LS3578 Product Reference Guide Control Characters (continued) Send Control L Send Control M Send Control N Send Control O Send Control P Send Control Q Advanced Data Formatting 12 - 45 Control Characters (continued) Send Control R Send Control S Send Control T Send Control U Send Control V Send Control W 12 - 46 Symbol LS3578 Product Reference Guide Control Characters (continued) Send Control X Send Control Y Send Control Z Send Control [ Send Control \ Send Control ] Advanced Data Formatting 12 - 47 Control Characters (continued) Send Control 6 Send Control - Keyboard Characters Scan the “Send __” bar code for the keyboard characters to send. Send Space Send ! Send “ Send # 12 - 48 Symbol LS3578 Product Reference Guide Keyboard Characters (continued) Send $ Send % Send & Send ‘ Send ( Send ) Send * Advanced Data Formatting 12 - 49 Keyboard Characters (continued) Send + Send , Send - Send . Send / Send 0 Send 1 12 - 50 Symbol LS3578 Product Reference Guide Keyboard Characters (continued) Send 2 Send 3 Send 4 Send 5 Send 6 Send 7 Send 8 Advanced Data Formatting 12 - 51 Keyboard Characters (continued) Send 9 Send : Send ; Send < Send = Send > Send ? 12 - 52 Symbol LS3578 Product Reference Guide Keyboard Characters (continued) Send @ Send A Send B Send C Send D Send E Send F Advanced Data Formatting 12 - 53 Keyboard Characters (continued) Send G Send H Send I Send J Send K Send L Send M 12 - 54 Symbol LS3578 Product Reference Guide Keyboard Characters (continued) Send N Send O Send P Send Q Send R Send S Send T Advanced Data Formatting 12 - 55 Keyboard Characters (continued) Send U Send V Send W Send X Send Y Send Z Send [ 12 - 56 Symbol LS3578 Product Reference Guide Keyboard Characters (continued) Send \ Send ] Send ^ Send _ Send ` Send a Send b Advanced Data Formatting 12 - 57 Keyboard Characters (continued) Send c Send d Send e Send f Send g Send h Send i 12 - 58 Symbol LS3578 Product Reference Guide Keyboard Characters (continued) Send j Send k Send l Send m Send n Send o Send p Advanced Data Formatting 12 - 59 Keyboard Characters (continued) Send q Send r Send s Send t Send u Send v Send w 12 - 60 Symbol LS3578 Product Reference Guide Keyboard Characters (continued) Send x Send y Send z Send { Send | Send } Send ~ Advanced Data Formatting 12 - 61 Send ALT Characters Send Alt 2 Send Alt A Send Alt B Send Alt C Send Alt D Send Alt E Send Alt F 12 - 62 Symbol LS3578 Product Reference Guide Send ALT Characters (continued) Send Alt G Send Alt H Send Alt I Send Alt J Send Alt K Send Alt L Send Alt M Advanced Data Formatting 12 - 63 Send ALT Characters (continued) Send Alt N Send Alt O Send Alt P Send Alt Q Send Alt R Send Alt S Send Alt T 12 - 64 Symbol LS3578 Product Reference Guide Send ALT Characters (continued) Send Alt U Send Alt V Send Alt W Send Alt X Send Alt Y Send Alt Z Send Alt [ Advanced Data Formatting 12 - 65 Send ALT Characters (continued) Send Alt \ Send Alt ] 12 - 66 Symbol LS3578 Product Reference Guide Send Keypad Characters Send Keypad * Send Keypad + Send Keypad - Send Keypad . Send Keypad / Send Keypad 0 Send Keypad 1 Advanced Data Formatting 12 - 67 Send Keypad Characters (continued) Send Keypad 2 Send Keypad 3 Send Keypad 4 Send Keypad 5 Send Keypad 6 Send Keypad 7 Send Keypad 8 12 - 68 Symbol LS3578 Product Reference Guide Send Keypad Characters (continued) Send Keypad 9 Send Keypad Enter Send Keypad Numlock Send Break Key Send Delete Key Send Page Up Key Send End Key Advanced Data Formatting 12 - 69 Send Keypad Characters (continued) Send Page Down Key Send Pause Key Send Scroll Lock Key Send Backspace Key Send Tab Key Send Print Screen Key Send Insert Key 12 - 70 Symbol LS3578 Product Reference Guide Send Keypad Characters (continued) Send Home Key Send Enter Key Send Escape Key Send Up Arrow Key Send Down Arrow Key Send Left Arrow Key Send Right Arrow Key Advanced Data Formatting 12 - 71 Send Function Key Send F1 Key Send F2 Key Send F3 Key Send F4 Key Send F5 Key Send F6 Key Send F7 Key 12 - 72 Symbol LS3578 Product Reference Guide Send Function Key (continued) Send F8 Key Send F9 Key Send F10 Key Send F11 Key Send F12 Key Send F13 Key Send F14 Key Advanced Data Formatting 12 - 73 Send Function Key (continued) Send F15 Key Send F16 Key Send F17 Key Send F18 Key Send F19 Key Send F20 Key Send F21 Key 12 - 74 Symbol LS3578 Product Reference Guide Send Function Key (continued) Send F22 Key Send F23 Key Send F24 Key Send PF1 Key Send PF2 Key Send PF3 Key Send PF4 Key Advanced Data Formatting 12 - 75 Send Function Key (continued) Send PF5 Key Send PF6 Key Send PF7 Key Send PF8 Key Send PF9 Key Send PF10 Key Send PF11 Key 12 - 76 Symbol LS3578 Product Reference Guide Send Function Key (continued) Send PF12 Key Send PF13 Key Send PF14 Key Send PF15 Key Send PF16 Key Send PF17 Key Send PF18 Key Advanced Data Formatting 12 - 77 Send Function Key (continued) Send PF19 Key Send PF20 Key Send PF21 Key Send PF22 Key Send PF23 Key Send PF24 Key Send PF25 Key 12 - 78 Symbol LS3578 Product Reference Guide Send Function Key (continued) Send PF26 Key Send PF27 Key Send PF28 Key Send PF29 Key Send PF30 Key Send Right Control Key The “Send Right Control Key” action will send a tap (press and release) of the Right Control Key. Send Right Control Key Advanced Data Formatting 12 - 79 Send Graphic User Interface (GUI) Characters The “Send Graphic User Interface Character” actions will tap the specified key while holding the System Dependent Graphic User Interface (GUI) Key. The definition of the Graphic User Interface key is dependant upon the attached system: Send GUI 0 Send GUI 1 Send GUI 2 Send GUI 3 Send GUI 4 Send GUI 5 12 - 80 Symbol LS3578 Product Reference Guide Send Graphic User Interface (GUI) Characters (continued) Send GUI 6 Send GUI 7 Send GUI 8 Send GUI 9 Send GUI A Send GUI B Send GUI C Advanced Data Formatting 12 - 81 Send Graphic User Interface (GUI) Characters (continued) Send GUI D Send GUI E Send GUI F Send GUI G Send GUI H Send GUI I Send GUI J 12 - 82 Symbol LS3578 Product Reference Guide Send Graphic User Interface (GUI) Characters (continued) Send GUI K Send GUI L Send GUI M Send GUI N Send GUI O Send GUI P Send GUI Q Advanced Data Formatting 12 - 83 Send Graphic User Interface (GUI) Characters (continued) Send GUI R Send GUI S Send GUI T Send GUI U Send GUI V Send GUI W Send GUI X 12 - 84 Symbol LS3578 Product Reference Guide Send Graphic User Interface (GUI) Characters (continued) Send GUI Y Send GUI Z Turn On/Off Rule Sets Use these bar codes to turn rule sets on and off. Turn On Rule Set 1 Turn On Rule Set 2 Turn On Rule Set 3 Turn On Rule Set 4 Advanced Data Formatting 12 - 85 Turn On/Off Rule Sets (continued) Use these bar codes to turn rule sets on and off. Turn Off Rule Set 1 Turn Off Rule Set 2 Turn Off Rule Set 3 Turn Off Rule Set 4 12 - 86 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard Space # $ % * + (Dash) Advanced Data Formatting 12 - 87 Alphanumeric Keyboard (continued) . , / ! “ & ‘ ( 12 - 88 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) ) : ; < = > ? Advanced Data Formatting 12 - 89 Alphanumeric Keyboard (continued) @ [ \ ] ^ _ (Underscore) ` 12 - 90 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) NOTENumeric bar codes below should not be confused with those on the numeric keypad. 0 1 2 3 4 5 Advanced Data Formatting 12 - 91 Alphanumeric Keyboard (continued) 6 7 8 9 A B C 12 - 92 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) D E F G H I J Advanced Data Formatting 12 - 93 Alphanumeric Keyboard (continued) K L M N O P Q 12 - 94 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) R S T U V W X Advanced Data Formatting 12 - 95 Alphanumeric Keyboard (continued) Y Z Cancel End of Message a b c 12 - 96 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) d e f g h i j Advanced Data Formatting 12 - 97 Alphanumeric Keyboard (continued) k l m n o p q 12 - 98 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) r s t u v w x Advanced Data Formatting 12 - 99 Alphanumeric Keyboard (continued) y z { | } ~ 12 - 100Symbol LS3578 Product Reference Guide Appendix A Standard Default Parameters Table A-1 Standard Default Parameters Table Parameter Default Page Number Radio Communications Bluetooth Host (Host Type) Cradle Host 4-5 Bluetooth Friendly Name Scanner name and serial number 4-7 Discoverable Mode General 4-7 Country Keyboard Types (Country Code) North American 4-9 HID Keyboard Keystroke Delay No Delay (0 msec) 4-11 CAPS Lock Override Disable 4-11 Ignore Unknown Characters Enable 4-12 Emulate Keypad Disable 4-12 Keyboard FN1 Substitution Disable 4-13 Function Key Mapping Disable 4-13 Simulated Caps Lock Disable 4-14 Convert Case No Case Conversion 4-14 Beep on Reconnect Attempt Disable 4-15 Reconnect Attempt Interval 30 sec 4-16 Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode On Bar Code Data 4-18 Modes of Operation (Point-to-Point/Multipoint-to-Point) Point-to-Point 4-20 1 User selection is required to configure this interface and this is the most common selection. A-2 Symbol LS3578 Product Reference Guide Table A-1 Standard Default Parameters Table (Continued) Parameter Default Page Number Parameter Broadcast (Cradle Host Only) Enable 4-21 Pairing Modes Unlocked 4-22 Pairing on Contacts Disable 4-23 Connection Maintenance Interval 15 min 4-24 Authentication Disable 4-27 Pin Code Static 4-28 Encryption Disable 4-29 Default Parameters Restore Defaults 5-4 Beeper Tone Medium 5-5 Beeper Volume High 5-6 Laser On Time 3.0 sec 5-7 Beep After Good Decode Enable 5-7 Trigger Mode Level 5-8 Aim Duration 0.0 sec 5-9 Beep on Insertion Enable 5-9 Time Delay to Reduced Power Mode 1 Second 5-10 Transmit Code ID Character None 5-11 Scan Angle Normal Angle 5-11 Prefix Value 7013 5-12 Suffix Value 7013 5-12 Scan Data Transmission Format Data As Is 5-13 FN1 Substitution Values Set FN1 Substitution Value 5-15 Transmit “No Read” Message Disable No Read 5-15 Synapse Interface Standard Synapse Connection 5-16 Batch Mode Normal (Do Not Batch Data) 5-17 User Preferences Report Scanner Version 1User 5-19 selection is required to configure this interface and this is the most common selection. Standard Default Parameters Table A-1 Standard Default Parameters Table (Continued) Parameter Default Page Number Report Scan Engine Version 5-19 Report MIMIC Version 5-19 Report Synapse Cable 5-19 Keyboard Wedge Host Parameters Keyboard Wedge Host Type IBM PC/AT& IBM PC Compatibles1 6-4 Keyboard Wedge Country Types (Country Codes) North American 6-5 Ignore Unknown Characters Enable 6-7 Keystroke Delay 0 msec (No Delay) 6-7 Intra-Keystroke Delay Disable 6-8 Alternate Numeric Keypad Emulation Disable 6-8 Caps Lock On Disable 6-9 Caps Lock Override Disable 6-9 Convert Wedge Data Do Not Convert Wedge Data 6-10 Function Key Mapping Disable 6-10 FN1 Substitution Disable 6-11 Send Make and Break Send Make and Break Scan Codes 6-11 RS-232 Host Types Standard RS-2321 7-6 Baud Rate 9600 7-7 Parity None 7-9 Check Receive Errors Enable 7-10 Stop Bit Select 1 Stop Bit 7-11 Data Bits 8-Bit 7-11 Hardware Handshaking None 7-12 Software Handshaking None 7-14 Host Serial Response Time-out Minimum: 2 Sec 7-16 RS-232 Host Parameters 1 User selection is required to configure this interface and this is the most common selection. A-3 A-4 Symbol LS3578 Product Reference Guide Table A-1 Standard Default Parameters Table (Continued) Parameter Default Page Number RTS Line State Host: Low RTS 7-17 Beep on Disable 7-17 Intercharacter Delay Minimum: 0 msec 7-18 Nixdorf Mode A/B and OPOS/JPOS Beep/LED Options Normal Operation 7-19 Ignore Unknown Characters Send Bar Code 7-20 USB Device Type HID Keyboard Emulation 8-5 USB Country Keyboard Types (Country Codes) North American 8-6 USB Keystroke Delay No Delay (0 msec) 8-8 USB CAPS Lock Override Disable 8-9 USB Ignore Unknown Characters Enable 8-9 Emulate Keypad Disable 8-10 USB Keyboard FN1 Substitution Disable 8-10 Function Key Mapping Disable 8-11 Simulated Caps Lock Disable 8-11 Convert Case No Case Conversion 8-12 Port Address None Selected 9-4 Convert Unknown to Code 39 Disable 9-4 None1 10-1 UPC-A Enable 11-5 UPC-E Enable 11-5 UPC-E1 Disable 11-6 EAN-13/JAN 13 Enable 11-6 EAN-8/JAN 8 Enable 11-7 Bookland EAN Disable 11-7 USB Host Parameters IBM 468X/469X Host Parameters 123Scan Configuration Tool 123Scan Configuration UPC/EAN 1 User selection is required to configure this interface and this is the most common selection. Standard Default Parameters Table A-1 Standard Default Parameters Table (Continued) Parameter Decode UPC/EAN/JAN Supplementals (2 and 5 digits) Default Ignore Supplementals User-Programmable Supplementals Page Number 11-8 11-11 UPC/EAN/JAN Supplemental Redundancy 7 11-12 Transmit UPC-A Check Digit Enable 11-12 Transmit UPC-E Check Digit Enable 11-12 Transmit UPC-E1 Check Digit Enable 11-12 UPC-A Preamble System Character 11-14 UPC-E Preamble System Character 11-15 UPC-E1 Preamble System Character 11-16 Convert UPC-E to A Disable 11-17 Convert UPC-E1 to A Disable 11-17 EAN-8/JAN-8 Extend Disable 11-18 Bookland ISBN Format 10 11-19 UCC Coupon Extended Code Disable 11-20 Code 128 Enable 11-21 UCC/EAN-128 Enable 11-22 ISBT 128 Enable 11-22 Code 39 Enable 11-23 Trioptic Code 39 Disable 11-23 Convert Code 39 to Code 32 Disable 11-24 Code 32 Prefix Disable 11-24 Set Length(s) for Code 39 2 to 55 11-25 Code 39 Check Digit Verification Disable 11-26 Transmit Code 39 Check Digit Disable 11-26 Code 39 Full ASCII Conversion Disable 11-27 Code 128 Code 39 1 User selection is required to configure this interface and this is the most common selection. A-5 A-6 Symbol LS3578 Product Reference Guide Table A-1 Standard Default Parameters Table (Continued) Parameter Default Page Number Code 93 Code 93 Disable 11-28 Set Lengths for Code 93 4 to 55 11-28 Code 11 Disable 11-30 Set Lengths for Code 11 4 to 55 11-31 Code 11 Check Digit Verification One Check Digit 11-32 Transmit Code 11 Check Digits Disable 11-33 Interleaved 2 of 5 (I 2 of 5) Enable 11-34 Set Lengths for Interleaved 2 of 5 14 11-34 I 2 of 5 Check Digit Verification Disable 11-36 Transmit I 2 of 5 Check Digit Disable 11-36 Convert I 2 of 5 to EAN-13 Disable 11-37 Discrete 2 of 5 Disable 11-37 Set Lengths for D 2 of 5 12 11-38 Codabar Disable 11-39 Set Lengths for Codabar 5 to 55 11-40 CLSI Editing Disable 11-41 NOTIS Editing Disable 11-41 MSI Disable 11-42 Set Lengths for MSI 1 to 55 11-43 MSI Check Digits One 11-44 Transmit MSI Check Digit(s) Disable 11-45 MSI Check Digit Algorithm Mod 10/Mod 10 11-45 Code 11 Interleaved 2 of 5 (I 2 of 5) Discrete 2 of 5 (D 2 of 5) Codabar (NW - 7) MSI 1User selection is required to configure this interface and this is the most common selection. Standard Default Parameters Table A-1 Standard Default Parameters Table (Continued) Parameter Default Page Number GS1 DataBar GS1 DataBar-14 Disable 11-46 GS1 DataBar Limited Disable 11-46 GS1 DataBar Expanded Disable 11-47 Convert GS1 DataBar to UPC/EAN Disable 11-47 Redundancy Level 1 11-48 Security Levels 0 11-50 Bi-directional Redundancy Disable 11-51 Symbology - Specific Security Levels 1 User selection is required to configure this interface and this is the most common selection. A-7 A-8 Symbol LS3578 Product Reference Guide Appendix B Programming Reference Symbol Code Identifiers Table B-1 Symbol Code Characters Code Character Code Type A UPC/EAN B Code 39, Code 39 Full ASCII, Code 32 C Codabar D Code 128, ISBT 128 E Code 93 F Interleaved 2 of 5 G Discrete 2 of 5, or Discrete 2 of 5 IATA H Code 11 J MSI K UCC/EAN-128 L Bookland EAN M Trioptic Code 39 R GS1 DataBar Family B-2 Symbol LS3578 Product Reference Guide AIM Code Identifiers Each AIM Code Identifier contains the three-character string ]cm where: ] c m Table B-2 = = = Flag Character (ASCII 93) Code Character (see Table B-2) Modifier Character (see Table B-3) Aim Code Characters Code Character Code Type A Code 39, Code 39 Full ASCII, Code 32 C Code 128 (all variants) E UPC/EAN e GS1 DataBar Family F Codabar G Code 93 H Code 11 I Interleaved 2 of 5 M MSI S Discrete 2 of 5, IATA 2 of 5 X Code 39 Trioptic, Bookland EAN Programming Reference The modifier character is the sum of the applicable option values based on Table B-3. Table B-3 Modifier Characters Code Type Code 39 Option Value Option 0 No check character or Full ASCII processing. 1 Reader has checked one check character. 3 Reader has checked and stripped check character. 4 Reader has performed Full ASCII character conversion. 5 Reader has performed Full ASCII character conversion and checked one check character. 7 Reader has performed Full ASCII character conversion and checked and stripped check character. Example: A Full ASCII bar code with check character W, A+I+MI+DW, is transmitted as ]A7AIMID where 7 = (3+4). Trioptic Code 39 0 No option specified at this time. Always transmit 0. Code 128 0 Standard data packet, no Function code 1 in first symbol position. 1 Function code 1 in first symbol character position. 2 Function code 1 in second symbol character position. Example: A Trioptic bar code 412356 is transmitted as ]X0412356. Example: ACode (EAN) 128 bar code with Function 1 characterFNC1 in the first position, AIMID is transmitted as ]C1AIMID. I 2 of 5 0 No check digit processing. 1 Reader has validated check digit. 3 Reader has validated and stripped check digit. Example: An I 2 of 5 bar code without check digit, 4123, is transmitted as ]I04123. Codabar 0 Standard Codabar. 1 ABC Codabar. 3 Reader has stripped check digit before transmission. Example: A Codabar bar code without check digit, 4123, is transmitted as ]F04123 Code 93 0 No options specified at this time. Always transmit 0. Example: A Code 93 bar code 012345678905 is transmitted as ]G0012345678905. B-3 B-4 Symbol LS3578 Product Reference Guide Table B-3 Modifier Characters (Continued) Code Type MSI Option Value Option 0 Check digits are sent. 1 No check digit is sent. Example: An MSI bar code 4123, with a single check digit checked, is transmitted as ]M14123. D 2 of 5 0 No options specified at this time. Always transmit 0. Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123 UPC/EAN 0 Standard packet in full EAN country code format, which is 13 digits for UPC-A, UPC-E, and EAN-13 (not including supplemental data). 1 Two-digit supplement data only. 2 Five-digit supplement data only. 3 Combined data packet comprising 13 digits from a UPC-A, UPC-E, or EAN-13 symbol and 2 or 5 digits from a supplemental symbol. 4 EAN-8 data packet. Example: A UPC-A bar code 012345678905 is transmitted as ]E00012345678905. Bookland EAN 0 No options specified at this time. Always transmit 0. Code 11 0 Single check digit 1 Two check digits 3 Check characters validated but not transmitted. Example: A Bookland EAN bar code 123456789X is transmitted as ]X0123456789X. Example: A Code 11 bar code 12345678901, with one check digit enabled and transmit check digit enabled, is transmitted as ]H012345678901. Appendix C Sample Bar Codes UPC-A 0 12345 67890 UPC-E 0 123456 5 5 C-2 Symbol LS3578 Product Reference Guide UPC-E1 1 123456 2 EAN-13 3 456789 012340 EAN-8 1234 5670 Code 39 123ABC Sample Bar Codes Trioptic Code 39 456123 Code 93 12345ABCDE Code 11 Æ1234567890Æ Codabar A1234567890A C-3 C-4 Symbol LS3578 Product Reference Guide MSI 123456789 Interleaved 2 of 5 12345678912345 Appendix D Numeric Bar Codes 0, 1, 2, 3 For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). 0 1 2 3 D-2 Symbol LS3578 Product Reference Guide 4, 5, 6, 7 For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). 4 5 6 7 Numeric Bar Codes 8, 9 For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). 8 9 Cancel In case of an error or to change the selection, scan the bar code below. Cancel D-3 D-4 Symbol LS3578 Product Reference Guide Appendix E Alphanumeric Bar Codes Alphanumeric Keyboard Space # $ % E-2 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) * + - . / ! Alphanumeric Bar Codes Alphanumeric Keyboard (continued) “ & ‘ ( ) : E-3 E-4 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) ; < = > ? @ Alphanumeric Bar Codes Alphanumeric Keyboard (continued) [ \ ] ^ _ ` E-5 E-6 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) NOTE Do not confuse the bar codes that follow with those on the numeric keypad. 0 1 2 3 4 Alphanumeric Bar Codes Alphanumeric Keyboard (continued) 5 6 7 8 9 End of Message Cancel E-7 E-8 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) A B C D E F Alphanumeric Bar Codes Alphanumeric Keyboard (continued) G H I J K L E-9 E - 10 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) M N O P Q R Alphanumeric Bar Codes E - 11 Alphanumeric Keyboard (continued) S T U V W X E - 12 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) Y Z a b c d Alphanumeric Bar Codes E - 13 Alphanumeric Keyboard (continued) e f g h i j E - 14 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) k l m n o p Alphanumeric Bar Codes E - 15 Alphanumeric Keyboard (continued) q r s t u v E - 16 Symbol LS3578 Product Reference Guide Alphanumeric Keyboard (continued) w x y z { | Alphanumeric Bar Codes E - 17 Alphanumeric Keyboard (continued) } ~ E - 18 Symbol LS3578 Product Reference Guide Glossary A Aperture. The opening in an optical system defined by a lens or baffle that establishes the field of view. ASCII. American Standard Code for Information Interchange. A 7 bit-plus-parity code representing 128 letters, numerals, punctuation marks and control characters. It is a standard data transmission code in the U.S. Autodiscrimination. The ability of an interface controller to determine the code type of a scanned bar code. After this determination is made, the information content is decoded. B Bar. The dark element in a printed bar code symbol. Bar Code. A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in machine-readable form. The general format of a bar code symbol consists of a leading margin, start character, data or message character, check character (if any), stop character, and trailing margin. Within this framework, each recognizable symbology uses its own unique format. See Symbology. Bar Code Density. The number of characters represented per unit of measurement (e.g., characters per inch). Bar Height. The dimension of a bar measured perpendicular to the bar width. Bar Width. Thickness of a bar measured from the edge closest to the symbol start character to the trailing edge of the same bar. Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data. The pattern of 0 and 1 values within the byte determines its meaning. Bits per Second (bps). Bits transmitted or received. Bluetooth. A technology that provides a way to connect and exchange information between devices such as scanners, mobile phones, laptops, PCs, and printers over a secure, globally unlicensed short-range radio frequency. Glossary - 2 Symbol LS3578 Product Reference Guide Boot or Boot-up. The process a computer goes through when it starts. During boot-up, the computer can run self-diagnostic tests and configure hardware and software. bps. See Bits Per Second. Byte. On an addressable boundary, eight adjacent binary digits (0 and 1) combined in a pattern to represent a specific character or numeric value. Bits are numbered from the right, 0 through 7, with bit 0 the low-order bit. One byte in memory is used to store one ASCII character. C CDRH. Center for Devices and Radiological Health. A federal agency responsible for regulating laser product safety. This agency specifies various laser operation classes based on power output during operation. CDRH Class 1. This is the lowest power CDRH laser classification. This class is considered intrinsically safe, even if all laser output were directed into the eye's pupil. There are no special operating procedures for this class. CDRH Class 2. No additional software mechanisms are needed to conform to this limit. Laser operation in this class poses no danger for unintentional direct human exposure. Character. A pattern of bars and spaces which either directly represents data or indicates a control function, such as a number, letter, punctuation mark, or communications control contained in a message. Character Set. Those characters available for encoding in a particular bar code symbology. Check Digit. A digit used to verify a correct symbol decode. The scanner inserts the decoded data into an arithmetic formula and checks that the resulting number matches the encoded check digit. Check digits are required for UPC but are optional for other symbologies. Using check digits decreases the chance of substitution errors when a symbol is decoded. Codabar. A discrete self-checking code with a character set consisting of digits 0 to 9 and six additional characters: ( - $ : / , +). Code 128. A high density symbology which allows the controller to encode all 128 ASCII characters without adding extra symbol elements. Code 3 of 9 (Code 39). A versatile and widely used alphanumeric bar code symbology with a set of 43 character types, including all uppercase letters, numerals from 0 to 9 and 7 special characters (- . / + % $ and space). The code name is derived from the fact that 3 of 9 elements representing a character are wide, while the remaining 6 are narrow. Code 93. An industrial symbology compatible with Code 39 but offering a full character ASCII set and a higher coding density than Code 39. Code Length. Number of data characters in a bar code between the start and stop characters, not including those characters. Cold Boot. A cold boot restarts a computer and closes all running programs. COM Port. Communication port; ports are identified by number, e.g., COM1, COM2. Glossary - 3 Continuous Code. A bar code or symbol in which all spaces within the symbol are parts of characters. There are no intercharacter gaps in a continuous code. The absence of gaps allows for greater information density. Cradle. A cradle is used for charging the terminal battery and for communicating with a host computer, and provides a storage place for the terminal when not in use. D Dead Zone. An area within a scanner's field of view, in which specular reflection may prevent a successful decode. Decode. To recognize a bar code symbology (e.g., UPC/EAN) and then analyze the content of the specific bar code scanned. Decode Algorithm. A decoding scheme that converts pulse widths into data representation of the letters or numbers encoded within a bar code symbol. Decryption. Decryption is the decoding and unscrambling of received encrypted data. Also see, Encryption and Key. Depth of Field. The range between minimum and maximum distances at which a scanner can read a symbol with a certain minimum element width. Discrete Code. A bar code or symbol in which the spaces between characters (intercharacter gaps) are not part of the code. Discrete 2 of 5. A binary bar code symbology representing each character by a group of five bars, two of which are wide. The location of wide bars in the group determines which character is encoded; spaces are insignificant. Only numeric characters (0 to 9) and START/STOP characters may be encoded. E EAN. European Article Number. This European/International version of the UPC provides its own coding format and symbology standards. Element dimensions are specified metrically. EAN is used primarily in retail. Element. Generic term for a bar or space. Encoded Area. Total linear dimension occupied by all characters of a code pattern, including start/stop characters and data. ENQ (RS-232). ENQ software handshaking is also supported for the data sent to the host. ESD. Electro-Static Discharge H HID. Human Interface Device. A Bluetooth host type. Host Computer. A computer that serves other terminals in a network, providing such services as computation, database access, supervisory programs and network control. Glossary - 4 Symbol LS3578 Product Reference Guide Hz. Hertz; A unit of frequency equal to one cycle per second. I IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various laser operation classes based on power output during operation. IEC (825) Class 1. This is the lowest power IEC laser classification. Conformity is ensured through a software restriction of 120 seconds of laser operation within any 1000 second window and an automatic laser shutdown if the scanner's oscillating mirror fails. Intercharacter Gap. The space between two adjacent bar code characters in a discrete code. Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five interleaved spaces. Interleaving provides for greater information density. The location of wide elements (bar/spaces) within each group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only numeric (0 to 9) and START/STOP characters may be encoded. Interleaved Bar Code. A bar code in which characters are paired together, using bars to represent the first character and the intervening spaces to represent the second. Input/Output Ports. I/O ports are primarily dedicated to passing information into or out of the terminal’s memory. Series 9000 mobile computers include Serial and USB ports. I/O Ports. interface The connection between two devices, defined by common physical characteristics, signal characteristics, and signal meanings. Types of interfaces include RS-232 and PCMCIA. K Key. A key is the specific code used by the algorithm to encrypt or decrypt the data. Also see, Encryption and Decrypting. L LASER. Light Amplification by Stimulated Emission of Radiation.The laser is an intense light source. Light from a laser is all the same frequency, unlike the output of an incandescent bulb. Laser light is typically coherent and has a high energy density. Laser Diode. A gallium-arsenide semiconductor type of laser connected to a power source to generate a laser beam. This laser type is a compact source of coherent light. Laser Scanner. A type of bar code reader that uses a beam of laser light. LED Indicator. A semiconductor diode (LED - Light Emitting Diode) used as an indicator, often in digital displays. The semiconductor uses applied voltage to produce light of a certain frequency determined by the semiconductor's particular chemical composition. Glossary - 5 Light Emitting Diode. See LED. M MIL. 1 mil = 1 thousandth of an inch. MIN. Mobile Identification Number. The unique account number associated with a cellular device. It is broadcast by the cellular device when accessing the cellular system. Misread (Misdecode). A condition which occurs when the data output of a reader or interface controller does not agree with the data encoded within a bar code symbol. MRD. Minimum reflective difference. A measurement of print contrast. N Nominal. The exact (or ideal) intended value for a specified parameter. Tolerances are specified as positive and negative deviations from this value. Nominal Size. Standard size for a bar code symbol. Most UPC/EAN codes are used over a range of magnifications (e.g., from 0.80 to 2.00 of nominal). O ODI. See Open Data-Link Interface. Open Data-Link Interface (ODI). Novell’s driver specification for an interface between network hardware and higher-level protocols. It supports multiple protocols on a single NIC (Network Interface Controller). It is capable of understanding and translating any network information or request sent by any other ODI-compatible protocol into something a NetWare client can understand and process. Open System Authentication. Open System authentication is a null authentication algorithm. P PAN . Personal area network. Using Bluetooth wireless technology, PANs enable devices to communicate wirelessly. Generally, a wireless PAN consists of a dynamic group of less than 255 devices that communicate within about a 33-foot range. Only devices within this limited area typically participate in the network. Parameter. A variable that can have different values assigned to it. Percent Decode. The average probability that a single scan of a bar code would result in a successful decode. In a well-designed bar code scanning system, that probability should approach near 100%. Glossary - 6 Symbol LS3578 Product Reference Guide Print Contrast Signal (PCS). Measurement of the contrast (brightness difference) between the bars and spaces of a symbol. A minimum PCS value is needed for a bar code symbol to be scannable. PCS = (RL - RD) / RL, where RL is the reflectance factor of the background and RD the reflectance factor of the dark bars. Programming Mode. The state in which a scanner is configured for parameter values. See Scanning Mode. Q Quiet Zone. A clear space, containing no dark marks, which precedes the start character of a bar code symbol and follows the stop character. QWERTY. A standard keyboard commonly used on North American and some European PC keyboards. “QWERTY” refers to the arrangement of keys on the left side of the third row of keys. R Reflectance. Amount of light returned from an illuminated surface. Resolution. The narrowest element dimension which is distinguished by a particular reading device or printed with a particular device or method. RF. Radio Frequency. RS-232. An Electronic Industries Association (EIA) standard that defines the connector, connector pins, and signals used to transfer data serially from one device to another. S Scan Area. Area intended to contain a symbol. Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol. Its three main components are: 1) Light source (laser or photoelectric cell) - illuminates a bar code,; 2) Photodetector - registers the difference in reflected light (more light reflected from spaces); 3) Signal conditioning circuit - transforms optical detector output into a digitized bar pattern. Scanning Mode. The scanner is energized, programmed and ready to read a bar code. Scanning Sequence. A method of programming or configuring parameters for a bar code reading system by scanning bar code menus. Self-Checking Code. A symbology that uses a checking algorithm to detect encoding errors within the characters of a bar code symbol. Space. The lighter element of a bar code formed by the background between bars. Specular Reflection. The mirror-like direct reflection of light from a surface, which can cause difficulty decoding a bar code. Glossary - 7 SPP. Serial Port Profile. Start/Stop Character. A pattern of bars and spaces that provides the scanner with start and stop reading instructions and scanning direction. The start and stop characters are normally to the left and right margins of a horizontal code. Substrate. A foundation material on which a substance or image is placed. Symbol. A scannable unit that encodes data within the conventions of a certain symbology, usually including start/stop characters, quiet zones, data characters and check characters. Symbol Aspect Ratio. The ratio of symbol height to symbol width. Symbol Height. The distance between the outside edges of the quiet zones of the first row and the last row. Symbol Length. Length of symbol measured from the beginning of the quiet zone (margin) adjacent to the start character to the end of the quiet zone (margin) adjacent to a stop character. Symbology. The structural rules and conventions for representing data within a particular bar code type (e.g. UPC/EAN, Code 39, PDF417, etc.). T Tolerance. Allowable deviation from the nominal bar or space width. U UPC. Universal Product Code. A relatively complex numeric symbology. Each character consists of two bars and two spaces, each of which is any of four widths. The standard symbology for retail food packages in the United States. V Visible Laser Diode (VLD). A solid state device which produces visible laser light. Glossary - 8 Symbol LS3578 Product Reference Guide Index Numerics 123Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 A actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2 ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1 actions . . . . . . . . . . . . . . . . . . . . . . . . . . .12-1, 12-21 move cursor . . . . . . . . . . . . . . . . . . . . . . . 12-25 send data . . . . . . . . . . . . . . . . . . . . . . . . . 12-21 setup fields . . . . . . . . . . . . . . . . . . . . . . . . 12-24 alphanumeric keyboard . . . . . . . . . . . . . . . . . . 12-86 alternate rule sets . . . . . . . . . . . . . . . . . . . . . . . 12-3 bar code menu example . . . . . . . . . . . . . . . . . . 12-2 beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-41 code lengths . . . . . . . . . . . . . . . . . . . . . . . . . . 12-12 code types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-8 criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-1, 12-8 default rules . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5 move cursor past a character . . . . . . . . . . . . . 12-24 move cursor to a character . . . . . . . . . . . . . . . 12-24 move cursor to start of data . . . . . . . . . . . . . . 12-24 numeric keypad . . . . . . . . . . . . . . . . . . .12-18, 12-19 pad spaces . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-31 pad zeros . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-36 rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1 rules hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . 12-4 send alt characters . . . . . . . . . . . . . . . . . . . . . 12-61 send control characters . . . . . . . . . . . . . . . . . . 12-42 send function key . . . . . . . . . . . . . . . . . . . . . . 12-71 send keyboard characters . . . . . . . . . . . . . . . . 12-47 send keypad characters . . . . . . . . . . . . . . . . . 12-66 send preset value . . . . . . . . . . . . . . . . . . . . . . 12-24 send value . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-29 skip ahead "n" characters . . . . . . . . . . . . . . . . 12-24 skip ahead characters . . . . . . . . . . . . . . . . . . . 12-26 skip back "n" characters . . . . . . . . . . . . . . . . . 12-24 skip back characters . . . . . . . . . . . . . . . . . . . . 12-28 space removal . . . . . . . . . . . . . . . . . . . . . . . . 12-30 special commands . . . . . . . . . . . . . . . . . . . . . . 12-5 specific data string . . . . . . . . . . . . . . . . . . . . . 12-16 specific string any location . . . . . . . . . . . . . . . . . . . . . . . 12-17 any message ok . . . . . . . . . . . . . . . . . . . . 12-17 at start . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-16 rule belongs to set . . . . . . . . . . . . . . . . . . 12-20 turn off rule sets . . . . . . . . . . . . . . . . . . 12-84, 12-85 zero removal . . . . . . . . . . . . . . . . . . . . . . . . . . 12-30 advanced data formatting . . . . . . . . . . . . . . . . . . . . 12-1 actions . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1, 12-21 alphanumeric keyboard . . . . . . . . . . . . . . . . . 12-86 alternate rule sets . . . . . . . . . . . . . . . . . . . . . . . 12-3 bar code menu example . . . . . . . . . . . . . . . . . . 12-2 beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-41 code lengths . . . . . . . . . . . . . . . . . . . . . . . . . . 12-12 code types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-8 criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1, 12-8 default rules . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5 numeric keypad . . . . . . . . . . . . . . . . . . 12-18, 12-19 pad spaces . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-31 pad zeros . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-36 rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1 rules hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . 12-4 send alt characters . . . . . . . . . . . . . . . . . . . . . 12-61 send control characters . . . . . . . . . . . . . . . . . 12-42 send function key . . . . . . . . . . . . . . . . . . . . . . 12-71 send keyboard characters . . . . . . . . . . . . . . . 12-47 send keypad characters . . . . . . . . . . . . . . . . . 12-66 send preset value . . . . . . . . . . . . . . . . . . . . . . 12-29 setup fields . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-24 skip ahead characters . . . . . . . . . . . . . . . . . . 12-26 skip back characters . . . . . . . . . . . . . . . . . . . . 12-28 space removal . . . . . . . . . . . . . . . . . . . . . . . . 12-30 Index - 2 Symbol LS3578 Product Reference Guide special commands . . . . . . . . . . . . . . . . . . . . . . 12-5 specific data string . . . . . . . . . . . . . . . . . . . . . 12-16 turn off rule sets . . . . . . . . . . . . . . . . . .12-84, 12-85 zero removal . . . . . . . . . . . . . . . . . . . . . . . . . . 12-30 AIM code identifiers . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 aiming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 ASCII character set . . . . . . . . . . . . . . . . 6-14, 7-20, 8-13 ASCII values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20 authentication . . . . . . . . . . . . . . . . . . . . . . 4-3, 4-27, A-2 auto-reconnect . . . . . . . . . . . . . . . . 4-4, 4-15, 4-21, 4-24 B bar code defaults radio communication . . . . . . . . . . . . . . . . . . . . . . 4-2 bar codes 123Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 aim duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 authentication . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27 auto-reconnect in Bluetooth keyboard emulation (HID slave) mode . . . . . . . . . . . . . . . . . 4-18 auto-reconnect interval . . . . . . . . . . . . . . . . . . . 4-15 batch mode . . . . . . . . . . . . . . . . . . . . . . . .5-17, 5-18 beep after good decode . . . . . . . . . . . . . . . . . . . 5-7 beep on insertion . . . . . . . . . . . . . . . . . . . . . . . . 5-9 beeper tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 beeper volume . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 bluetooth friendly name . . . . . . . . . . . . . . . . . . . . 4-7 Bluetooth technology support . . . . . . . . . . . . . . . 4-8 cancel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3 connection maintenance interval . . . . . . . . . . . 4-24 convert case . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 data options pause duration . . . . . . . . . . . . . . . . . . . . . . 12-5 prefix/suffix values . . . . . . . . . . . . . . . . . . . 5-12 transmit code ID character . . . . . . . . . . . . . 5-11 discoverable mode . . . . . . . . . . . . . . . . . . . . . . . 4-7 emulate keypad . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29 FN1 substitution values . . . . . . . . . . . . . . . . . . . 5-15 HID CAPS lock override . . . . . . . . . . . . . . . . . . 4-11 HID country codes . . . . . . . . . . . . . . . . . . . . . . . 4-9 HID function key mapping . . . . . . . . . . . . . . . . . 4-13 HID ignore unknown characters . . . . . . . . . . . . 4-12 HID keyboard FN1 substitution . . . . . . . . . . . . . 4-13 HID keyboard keystroke delay . . . . . . . . . . . . . 4-11 IBM 468X/469X . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4 convert unkown to code 39 . . . . . . . . . . . . . . 9-4 default parameters . . . . . . . . . . . . . . . . . . . . 9-3 port address . . . . . . . . . . . . . . . . . . . . . . . . . 9-4 interleaved 2 of 5 . . . . . . . . . . . . . . . . . . . . . . 11-34 keyboard wedge . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 alternate numeric keypad emulation . . . . . . . 6-8 caps lock on . . . . . . . . . . . . . . . . . . . . . . . . . 6-9 caps lock override . . . . . . . . . . . . . . . . . . . . . 6-9 convert wedge data . . . . . . . . . . . . . . . . . . . 6-10 country keyboard types . . . . . . . . . . . . . . . . . 6-5 default table . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 FN1 substitution . . . . . . . . . . . . . . . . . . . . . 6-11 function key mapping . . . . . . . . . . . . . . . . . 6-10 host types . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 ignore unknown characters . . . . . . . . . . . . . . 6-7 intra-keystroke delay . . . . . . . . . . . . . . . . . . . 6-8 keystroke delay . . . . . . . . . . . . . . . . . . . . . . . 6-7 send make and break . . . . . . . . . . . . . . . . . 6-11 laser on time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 lock override . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 miscellaneous FN1 substitution values . . . . . . . . . . . . . . . . 5-15 prefix/suffix values . . . . . . . . . . . . . . . . . . . 5-12 scan angle . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11 scan data options . . . . . . . . . . . . . . . . . . . . 5-13 Synapse interface . . . . . . . . . . . . . . . . . . . . 5-16 transmit code ID . . . . . . . . . . . . . . . . . . . . . 5-11 transmit no read message . . . . . . . . . . . . . 5-15 numeric bar codes . . . . . . . . . . . . . . . . . . . . . . . . D-1 pairing modes . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 parameter broadcast . . . . . . . . . . . . . . . . . . . . . 4-21 PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 prefix/suffix values . . . . . . . . . . . . . . . . . . . . . . . 5-12 radio communication . . . . . . . . . . . . . . . . . . 4-4, 4-5 host types . . . . . . . . . . . . . . . . . . . . . . . 4-4, 4-5 pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21 radio output power . . . . . . . . . . . . . . . . . . . . . . . 4-21 reconnect attempt beep . . . . . . . . . . . . . . . . . . . 4-15 reconnect attempt interval . . . . . . . . . . . . . . . . . 4-16 report MIMIC version . . . . . . . . . . . . . . . . . . . . . 5-19 report scan engine version . . . . . . . . . . . . . . . . 5-19 report scanner version . . . . . . . . . . . . . . . . . . . . 5-19 report synapse cable . . . . . . . . . . . . . . . . . . . . . 5-19 RS-232 baud rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7 beep on BEL . . . . . . . . . . . . . . . . . . . . . . . . 7-17 beep on bel . . . . . . . . . . . . . . . . . . . . . . . . . 7-17 check receive errors . . . . . . . . . . . . . . . . . . 7-10 data bits . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11 default table . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 hardware handshaking . . . . . . . . . . . . . . . . 7-12 host serial response time-out . . . . . . . . . . . 7-16 host types . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 ignore unknown characters . . . . . . . . . . . . . 7-20 intercharacter delay . . . . . . . . . . . . . . . . . . 7-18 Nixdorf mode . . . . . . . . . . . . . . . . . . . . . . . . 7-19 parity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9 RTS line state . . . . . . . . . . . . . . . . . . . . . . . 7-17 stop bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11 RS-232 parameters software handshaking . . . . . . . . . . . . . . . . . 7-14 Index - 3 sample . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 scan angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11 scan data options . . . . . . . . . . . . . . . . . . . . . . . 5-13 scanner to cradle support . . . . . . . . . . . . . . . . . 4-20 set defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 simulated caps lock . . . . . . . . . . . . . . . . . . . . . . 4-14 symbologies bi-directional redundancy . . . . . . . . . . . . . 11-51 bookland EAN . . . . . . . . . . . . . . . . . . . . . . . 11-7 bookland ISBN . . . . . . . . . . . . . . . . . . . . . 11-19 codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-39 codabar CLSI editing . . . . . . . . . . . . . . . . 11-41 codabar lengths . . . . . . . . . . . . . . . . . . . . 11-40 codabar NOTIS editing . . . . . . . . . . . . . . . 11-41 code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-30 code 11 check digit verification . . . . . . . . . 11-32 code 11 lengths . . . . . . . . . . . . . . . . . . . . 11-31 code 128 . . . . . . . . . . . . . . . . . . . . . . . . . . 11-21 code 32 prefix . . . . . . . . . . . . . . . . . . . . . . 11-24 code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-23 code 39 check digit verification . . . . . . . . . 11-26 code 39 full ASCII . . . . . . . . . . . . . . . . . . . 11-27 code 39 lengths . . . . . . . . . . . . . . . . . . . . 11-25 code 39 transmit check digit . . . . . . . . . . . 11-26 code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-28 code 93 lengths . . . . . . . . . . . . . . . . . . . . 11-28 convert code 39 to code 32 . . . . . . . . . . . 11-24 convert GS1 DataBar to UPC/EAN . . . . . 11-47 convert UPC-E to UPC-A . . . . . . . . . . . . . 11-17 convert UPC-E1 to UPC-A . . . . . . . . . . . . 11-17 default table . . . . . . . . . . . . . . . . . . . . . . . . 11-2 discrete 2 of 5 . . . . . . . . . . . . . . . . . . . . . . 11-37 discrete 2 of 5 lengths . . . . . . . . . . . . . . . 11-38 EAN zero extend . . . . . . . . . . . . . . . . . . . 11-18 EAN-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6 EAN-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-7 GS1 DataBar . . . . . . . . . . . . . . . . . . . . . . 11-46 GS1 DataBar expanded . . . . . . . . . . . . . . 11-47 GS1 DataBar limited . . . . . . . . . . . . . . . . . 11-46 GS1 DataBar-14 . . . . . . . . . . . . . . . . . . . . 11-46 I 2 of 5 check digit verification . . . . . . . . . 11-36 I 2 of 5 convert to EAN-13 . . . . . . . . . . . . 11-37 I 2 of 5 transmit check digit . . . . . . . . . . . . 11-36 interleaved 2 of 5 lengths . . . . . . . . . . . . . 11-34 ISBT 128 . . . . . . . . . . . . . . . . . . . . . . . . . . 11-22 MSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-42 MSI check digit algorithm . . . . . . . . . . . . . 11-45 MSI check digits . . . . . . . . . . . . . . . . . . . . 11-44 MSI lengths . . . . . . . . . . . . . . . . . . . . . . . . 11-43 MSI transmit check digit . . . . . . . . . . . . . . 11-45 redundancy level . . . . . . . . . . . . . . . . . . . 11-48 security level . . . . . . . . . . . . . . . . . . . . . . . 11-50 supplementals . . . . . . . . . . . . . . . . . . . . . . 11-8 transmit code 11 check digits . . . . . . . . . . 11-33 trioptic code 39 . . . . . . . . . . . . . . . . . . . . . 11-23 UCC/EAN-128 . . . . . . . . . . . . . . . . . . . . . . 11-22 UPC/EAN/JAN supp redundancy . . . . . . . 11-12 UPC-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5 UPC-A preamble . . . . . . . . . . . . . . . . . . . . 11-14 UPC-A/E/E1 check digit . . . . . . . . . . . . . . 11-12 UPC-E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5 UPC-E preamble . . . . . . . . . . . . . . . . . . . . 11-15 UPC-E1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6 UPC-E1 preamble . . . . . . . . . . . . . . . . . . . 11-16 Synapse interface . . . . . . . . . . . . . . . . . . . . . . . 5-16 time delay to reduced power mode . . . . . . . . . . 5-10 transmit code ID . . . . . . . . . . . . . . . . . . . . . . . . 5-11 transmit no read message . . . . . . . . . . . . . . . . . 5-15 trigger mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 UCC coupon extended code . . . . . . . . . . . . . . 11-20 unpair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 UPC/EAN coupon code . . . . . . . . . . . . . . . . . . . . . . . 11-20 USB caps lock override . . . . . . . . . . . . . . . . . . . . . 8-9 convert case . . . . . . . . . . . . . . . . . . . . . . . . 8-12 country keyboard types . . . . . . . . . . . . . . . . . 8-6 default table . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 device type . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 emulate keypad . . . . . . . . . . . . . . . . . . . . . . 8-10 function key mapping . . . . . . . . . . . . . . . . . 8-11 keyboard FN 1 substitution . . . . . . . . . . . . . 8-10 keystroke delay . . . . . . . . . . . . . . . . . . . . . . . 8-8 simulated caps lock . . . . . . . . . . . . . . . . . . . 8-11 unknown characters . . . . . . . . . . . . . . . . . . . 8-9 variable PIN code . . . . . . . . . . . . . . . . . . . . . . . 4-28 batch mode stored data . . . . . . . . . . . . . . . . . . . . . . 5-17 battery charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 charging problems . . . . . . . . . . . . . . . . . . . . . . . . 1-8 inserting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 beeper setting tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 setting volume . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 beeper definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 1-10 security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27 bluetooth keyboard emulation . . . . . . . . . . . . . . . . . . 4-4 bullets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv C cables installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 character set . . . . . . . . . . . . . . . . . . . . . . . . . 7-20, 8-13 Index - 4 Symbol LS3578 Product Reference Guide charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 via USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 codabar bar codes CLSI editing . . . . . . . . . . . . . . . . . . . . . . . . . . 11-41 codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-39 lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-40 NOTIS editing . . . . . . . . . . . . . . . . . . . . . . . . . 11-41 code 11 bar codes code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-30 lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-31 code 128 bar codes code 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-21 UCC/EAN-128 . . . . . . . . . . . . . . . . . . . . . . . . . 11-22 code 39 bar codes check digit verification . . . . . . . . . . . . . . . . . . . 11-26 code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-23 full ASCII . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-27 lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-25 transmit check digit . . . . . . . . . . . . . . . . . . . . . 11-26 code 93 bar codes code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-28 lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-28 code identifiers AIM code identifiers . . . . . . . . . . . . . . . . . . . . . . B-2 Symbol code identifiers . . . . . . . . . . . . . . . . . . . . B-1 code types ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-8 configuring scanner . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 123Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 connecting IBM host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 keyboard wedge . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 lost connection . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 RS-232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Synapse interface . . . . . . . . . . . . . . . . . . . . . . . . 1-6 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 conventions notational . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiv cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3, 1-4 inserting scanner . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 supply power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 D decode zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 default parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 IBM 468X/469X . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3 keyboard wedge . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 radio communication . . . . . . . . . . . . . . . . . . . . . . 4-2 RS-232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 standard default table . . . . . . . . . . . . . . . . . . . . . A-1 symbologies . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 user preferences . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 discrete 2 of 5 bar codes discrete 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . 11-37 lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-38 E encryption . . . . . . . . . . . . . . . . . . . . . . . . .4-3, 4-29, A-2 error indications miscellaneous scanner options . . . . . . . . . . . . . . 4-1 H HID Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 HID slave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 host types keyboard wedge . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 RS-232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 I IBM 468X/469X connection . . . . . . . . . . . . . . . . . . . . 9-2 IBM 468X/469X default parameters . . . . . . . . . . . . . . 9-3 ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 inserting battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 interfaces supported . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 interleaved 2 of 5 bar codes check digit verification . . . . . . . . . . . . . . . . . . . 11-36 convert to EAN-13 . . . . . . . . . . . . . . . . . . . . . . 11-37 transmit check digit . . . . . . . . . . . . . . . . . . . . . 11-36 ISBT 128 bar codes ISBT 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-22 K keyboard maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12 keyboard wedge connection . . . . . . . . . . . . . . . . . . . 6-2 keyboard wedge default parameters . . . . . . . . . . . . . 6-3 L LED charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 lock override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 locked pairing mode . . . . . . . . . . . . . . . . . . . . 4-22, 4-24 low power mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 Index - 5 M R maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 master . . . . . . . . . . . . . . . . . . . . . . . 4-4, 4-6, 4-15, 4-21 Motorola enterprise mobility support . . . . . . . . . . . . . . xv mounting cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 MSI bar codes check digit algorithm . . . . . . . . . . . . . . . . . . . . 11-45 check digits . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-44 lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-43 MSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-42 transmit check digit . . . . . . . . . . . . . . . . . . . . . 11-45 multipoint-to-point communication . . . . . . . . . . . . . . 4-20 radio communication bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4, 4-5 Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Bluetooth Technology Profile support . . . . . . . . 1-10 defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 multipoint-to-point . . . . . . . . . . . . . . . . . . . . . . . 4-20 pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 point-to-point . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 reconnect attempt . . . . . . . . . . . . . . . . . . . . . . . 4-16 reconnect attempt beep . . . . . . . . . . . . . . . . . . . 4-15 range indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19 reconnect attempt . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 removing battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 RS-232 connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 default parameters . . . . . . . . . . . . . . . . . . . . . . . 7-3 host types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 N notational conventions . . . . . . . . . . . . . . . . . . . . . . . . .xiv O out of range indicator . . . . . . . . . . . . . . . . . . . . . . . . 4-19 S P pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 bar code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 bar code format . . . . . . . . . . . . . . . . . . . . . . . . . 4-24 beeper definitions . . . . . . . . . . . . . . . . . . . . . . . . 4-3 connection maintenance interval . . . . . . . . . . . 4-24 cradle host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 lock override . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 master/slave setup . . . . . . . . . . . . . . . . . . . . . . . 4-6 methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 modes . . . . . . . . . . . . . . . . . . . . . . . . . 4-2, 4-21, A-2 mulitpoint-to-point . . . . . . . . . . . . . . . . . . . . . . . 4-20 on contacts . . . . . . . . . . . . . . . . . . . . . . . . . 4-2, A-2 pin codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 point-to-point . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 radio communication . . . . . . . . . . . . . . . . . . . . . 1-10 SPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 unpair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 parameter defaults radio communication . . . . . . . . . . . . . . . . . . . . . . 4-2 PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 variable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 point-to-point communication . . . . . . . . . . . . . . . . . 4-20 power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 via USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 sample bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 scanner defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 scanner to cradle support . . . . . . . . . . . . . . . . . . . . 4-20 scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 aiming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5, 2-6 errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2, 11-1 parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 radio communications sequence example . . . . . 4-1 selecting angle . . . . . . . . . . . . . . . . . . . . . . . . . 5-11 sequence example . . . . . . . . . . . . . . . . . . . . . . 11-1 security level bar codes bi-directional redundancy . . . . . . . . . . . . . . . . 11-51 Serial Port Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 master . . . . . . . . . . . . . . . . . . . . . . . . 4-4, 4-15, 4-21 slave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 service information . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv setup 123Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 connecting a USB interface . . . . . . . . . . . . . . . . . 8-2 connecting an RS-232 interface . . . . . . . . . . . . . 7-2 connecting keyboard wedge interface . . . . . . . . . 6-2 connecting to an IBM 468X/469X host . . . . . . . . 9-2 cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 inserting scanner in cradle . . . . . . . . . . . . . . . . . 1-9 installing the cable . . . . . . . . . . . . . . . . . . . . . . . . 1-4 lost host connection . . . . . . . . . . . . . . . . . . . . . . 1-10 mounting cradle . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 supplying power . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Index - 6 Symbol LS3578 Product Reference Guide signal descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 slave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4, 4-6 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 SPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 master . . . . . . . . . . . . . . . . . . . . . . . . 4-4, 4-15, 4-21 slave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 standard default parameters . . . . . . . . . . . . . . . . . . . A-1 standard defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 stored data batch mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17 support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv Symbol code identifiers . . . . . . . . . . . . . . . . . . . . . . . B-1 symbology default parameters . . . . . . . . . . . . . . . . 11-2 Synapse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 selecting interface . . . . . . . . . . . . . . . . . . . . . . . 5-16 T technical specifications . . . . . . . . . . . . . . . . . . . . . . . 3-5 troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 U unlocked pairing mode . . . . . . . . . . . . . . . . . . . . . . 4-22 unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 unpairing bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 UPC/EAN bar codes bookland EAN . . . . . . . . . . . . . . . . . . . . . . . . . . 11-7 bookland ISBN . . . . . . . . . . . . . . . . . . . . . . . . 11-19 check digit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12 convert UPC-E to UPC-A . . . . . . . . . . . . . . . . 11-17 convert UPC-E1 to UPC-A . . . . . . . . . . . . . . . 11-17 EAN zero extend . . . . . . . . . . . . . . . . . . . . . . . 11-18 EAN-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6 EAN-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-7 supplementals . . . . . . . . . . . . . . . . . . . . . . . . . . 11-8 UCC coupon extended code . . . . . . . . . . . . . . 11-20 UPC-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5 UPC-A preamble . . . . . . . . . . . . . . . . . . . . . . . 11-14 UPC-E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5 UPC-E preamble . . . . . . . . . . . . . . . . . . . . . . . 11-15 UPC-E1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6 USB connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 default parameters . . . . . . . . . . . . . . . . . . . . . . . 8-4 parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 user preferences bar codes batch mode . . . . . . . . . . . . . . . . . . . . . . . .5-17, 5-18 beep on insertion . . . . . . . . . . . . . . . . . . . . . . . . 5-9 time delay to reduced power mode . . . . . . . . . . 5-10 user preferences parameters . . . . . . . . . . . . . . . . . . 5-2 Tell Us What You Think... We’d like to know what you think about this Manual. Please take a moment to fill out this questionnaire and fax this form to: (631) 738-4618, or mail to: Motorola, Inc. One Motorola Plaza M/S B-10 Holtsville, NY 11742-1300 Attention: Technical Publications Manager Advanced Data Capture Division IMPORTANT: If you need product support, please call the appropriate customer support number provided. Unfortunately, we cannot provide customer support at the fax number above. Manual Title:___________________________________________ (please include revision level) How familiar were you with this product before using this manual? Very familiar Slightly familiar Not at all familiar Did this manual meet your needs? If not, please explain. ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ What topics need to be added to the index, if applicable? ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ What topics do you feel need to be better discussed? Please be specific. ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ What can we do to further improve our manuals? ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ Thank you for your input—We value your comments. Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.symbol.com MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2008 72E-93911-02 Revision A - April 2008
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract, Print high-res Create Date : 2008:04:08 14:48:24Z Creator : FrameMaker 7.0 Modify Date : 2014:12:07 14:28:34+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : FrameMaker 7.0 Metadata Date : 2014:12:07 14:28:34+08:00 Format : application/pdf Title : Symbol LS3578 Product Reference Guide (72E-93911-02 Rev A) Document ID : uuid:f71b794b-67f1-49ca-8cde-a6f138009cfb Instance ID : uuid:6d1b3203-8726-584d-bb99-9561439afa6b Page Mode : UseOutlines Page Count : 378EXIF Metadata provided by EXIF.tools