MtM Plus Technology M905 M905 User Manual M905 Product Specification v1 0 20161214

Download:
Mirror Download [FCC.gov]
Document ID	3642735
Application ID	4Fkura+P9eRPe+gJtLNLhg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	136.13kB (1701640 bits)
Date Submitted	2017-11-17 00:00:00
Date Available	2017-11-21 00:00:00
Creation Date	2017-08-04 04:08:21
Producing Software	Mac OS X 10.11.6 Quartz PDFContext
Document Lastmod	2017-11-17 11:32:01
Document Title	M905 Product Specification v1.0 20161214
Document Creator	Word
Document Author:	Lin Maxim

M905 Bluetooth 4.2 LE SiP Module
Data Sheet-Preliminary
Dec 2, 2016 Rev1.0.0
Product Specification
of
M905 Bluetooth 4.2 LE SiP Module
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
M905 Product Specification - Preliminary
1 Description
The SiP module M905 is a small size
module with antenna inside. The module
provides full function of Bluetooth 4.2
Low Energy in a tiny module via 52 pins
LGA Foot Print. The M905 module
provides everything required to create
Bluetooth 4.2 Low Energy product with
RF, baseband, MCU, qualified Bluetooth
v4.2 stack and customer application
running on a single IC.
M905
enables
ultra-low
power
connectivity and basic data transfer for
applications previously limited by the
power consumption, size constraints and
complexity of other wireless standards.
The low power consumption and excellent
radio performance make it the best solution
for OEM /ODM customers who require
embedded Bluetooth 4.2 Low Energy
feature, such as, IP camera, car key, sport
and fitness watch, mouse, led light bulb
etc.
For the software and driver development,
we provide extensive technical document
and reference software code for the system
integration.
Hardware evaluation kit and development
utilities will be released base on listed OS
and processors to OEM customers.
2 Features
Embedded high performance antenna
Bluetooth® v4.2 BLE radio technology
Supports concurrent Bluetooth low
energy/ANT protocol operation
On-chip NFC tag for Out-of-Band (OOB)
pairing
Up to +4dBm output power
-96dBm sensitivity, Bluetooth low energy
Thread safe and run-time protected
Event driven API
2 data rates (2Mbps/1Mbps)
PPI - maximum flexibility for powerefficient applications and code
simplification
SPI Master/Slave
Automated power management system
with automatic power management of
each peripheral
Configurable I/O mapping for analog and
digital I/O
3 x Master/Slave SPI
2 x Two-wire interface (I²C)
UART (RTS/CTS)
3 x PWM
AES HW encryption
Real Time Counter (RTC)
Digital microphone interface (PDM)
Antenna On Package (AoP)
LGA-52 package, 6.5 x 6.5 mm
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
M905 Product Specification - Preliminary
Revision History
Rev.
Date
1.0.0 02/12/’16
Page
Chap
All
All
Description of change
Change(s)
Draft version for Review
Approval &
Date
Maxim Lin
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
M905 Product Specification - Preliminary
INDEX
1 Description ..................................................................................................................... 2
2 Feature ........................................................................................................................... 2
3 Block Diagram ............................................................................................................... 5
4 Technical Specification ................................................................................................. 6
4.1 Absolute Maximum Ratings ...................................................................................... 6
4.2 Operation Condition ................................................................................................... 6
4.3 Wireless Specifications .............................................................................................. 6
4.4 Radio Specifications Bluetooth 4.2 Low Energy ....................................................... 6
4.5 AoP Antenna Performance......................................................................................... 7
4.5.1 Antenna Pattern ....................................................................................................... 8
4.5.2 Antenna Return Loss ............................................................................................... 9
4.5.3 AoP Design Guide ................................................................................. 10.11.12.13
4.6 Power Consumption ................................................................................................. 14
5 Dimensions ............................................................................................................. 15.16
Pin Assignments ................................................................................................... 17.18
Recommend Footprint ............................................................................................... 19
Reference Design Circuit ........................................................................................... 20
Recommended Reflow Profile ................................................................................... 21
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
M905 Product Specification - Preliminary
4 TECHNICAL SPECIFICATION
4.1 Absolute Maximum Ratings
The M905 module has to withstand the operational requirements as listed in the table below
No
Description
Value
Ratings Over Operating Free-Air Temperature Range
Supply voltage All supply pins
must have the
same voltage
Voltage on any digital pin
Storage temperature range
Bluetooth RF output
-0.3 to 3.9
-0.3 to 3.9
–40 to 125
Unit
°C
dBm
4.2 Operation Condition
Power supply for the M905 module will be provided by the host via the power pins
Operating Condition
VCC
Operating ambient temperature range
Min.
1.7
-20°C
Typ.
3.3
Max.
3.6
70°C
4.3 Wireless Specifications
The M905 module compliance with the following features and standards
Features
Bluetooth Standards
Antenna Port
Frequency Band
Description
Bluetooth core v4.2 Low Energy
Support Single Antenna for Bluetooth
2.402 – 2.480 GHz
4.4 Radio Specifications Bluetooth 4.2 Low Energy
Features
Description
Frequency Band
2.402– 2.480 GHz (2.4 GHz ISM Band)
Number of selectable Sub channels
40 channels
Modulation
GFSK
Supported rates
<2Mbps
Maximum receive level
-10dBm (with PER <30. 8%)
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
M905 Product Specification - Preliminary
Parameter
RX sensitivity
Maximum input
Frequency range
Output power adjustment
ranger
Output power
Output power variation
Mode and Conditions
Min.
Typ.
Max.
Unit.
2402
-92
-10
2480
dBm
dBm
MHz
-20
dBm
dBm
dB
4.5 AoP Antenna Performance
Items
Freq. band
Gain
Return Loss
VSWR
Spec.
2.4~2.5GHz
>-5 dBi
<-6dB
3 max
Items
Impedance
Polarization
Directivity
Efficiency
Spec.
50 ohm
Linear
Omni-directional
>30%
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
M905 Product Specification - Preliminary
4.5.1 Antenna Pattern
Omnidirectional Radiation (Center Edge)
a. x-Axias H-Polarization & V-Polarization
b. y-Axias H-Polarization & V-Polarization
c. z-Axias H-Polarization & V-Polarization
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
M905 Product Specification - Preliminary
4.5.2 Antenna Return Loss:
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
M905 Product Specification - Preliminary
4.5.3 Antenna Design Guide
Center Edge:
a. Keep A≧10.5mm, B≧0.55mm
b. Connect Pin 2 to Upper GND, Pin 3 to lower GND
c. Don’t route signal trace across antenna clearance area
Parameter
Units : mm
≧10.5
0.55
Trace route
36mm
Pin2
Trace route
Pin3
Trace route
Layer 1
31mm
Layer 1
Parameter
Units : mm
1.25
2.9
0.38
0.55
0.25
Layer 1
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
10
M905 Product Specification - Preliminary
Upper GND
Antenna Clearance Area
Lower GND
Parameter
Units : mm
1.25
0.5
0.5
3.5
Layer 1
Antenna Clearance Area
Parameter
Units : mm
4.15
Layer 2,3,4
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
11
M905 Product Specification - Preliminary
Coner :
a. Connect Pin 1 to Ant. trace
b. Don’t route signal trace across antenna clearance area
Ant. Trace
Trace route
Trace route
Trace route
31mm
Pin1
36mm
Layer 1
Layer 1
C D
Parameter
Units : mm
0.5
4.34
0.5
1.5
0.29
3.5
0.25
0.25
Layer 1
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
12
M905 Product Specification - Preliminary
Antenna Clearance Area
Parameter
Units : mm
6.75
3.5
1.5
2.9
Layer 1
Antenna Clearance Area
Parameter
Units : mm
6.75
0.25
3.75
4.1
5.25
0.25
Layer 2,3,4
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
13
M905 Product Specification - Preliminary
4.6 Power Consumption
Item
Tx mode
Rx mode
System ON
Constant Latency
Condition
3.3V
1.8V
3.3V
1.8V
Typ.
12.06
15.32
Sleep Mode
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
14
M905 Product Specification - Preliminary
5. Dimensions
The size and thickness of the M905 module 6.5mm (W) x 6.5mm (L) x 1.3mm (H):
Top-View:
Side-View:
Bottom-View:
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
15
M905 Product Specification - Preliminary
Dimensions
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
16
M905 Product Specification - Preliminary
6. PIN DEFINITION
The foot print dimension and pin definition is defined as below
No
10
11
12
Pin Name
Antenna Leg
GNDA1
GNDA2
GND
ANT
RF
GND
GND
VDD
GND
GND
P0.21/nRESET
Pin Type
RF
RF
RF
Power
RF
RF
Power
Power
Power
Power
Power
Digital I/O
13
14
15
16
17
P0.14/TRACEDATA[3]
P0.15/TRACEDATA[2]
P0.16/TRACEDATA[1]
P0.18/TRACEDATA[0]
P0.00/XL1
18
P0.01/XL2
19
P0.03/AIN1
20
P0.02/AIN0
21
P0.09/NFC1
22
P0.10/NFC2
23
P0.05/AIN3
24
P0.04/AIN2
25
P0.31/AIN7
26
P0.30/AIN6
27
P0.29/AIN5
28
P0.28/AIN4
29
30
31
P0.27
P0.25
P0.26
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Analog input
Digital I/O
Analog input
Digital I/O
Analog input
Digital I/O
Analog input
Digital I/O NFC
input
Digital I/O NFC
input
Digital I/O
Analog input
Digital I/O
Analog input
Digital I/O
Analog input
Digital I/O
Analog input
Digital I/O
Analog input
Digital I/O
Analog input
Digital I/O
Digital I/O
Digital I/O
Description
Scenario B
Scenario A
Scenario A
Ground (0V)
Single-endded radio antenna connection
Single-endded radio antenna connection
Ground (0V)
Ground (0V)
Power supply
Ground (0V)
Ground (0V)
General purpose I/O pin. Configurable as system
RESET pin
General purpose I/O pin. Trace port output
General purpose I/O pin. Trace port output
General purpose I/O pin. Trace port output
General purpose I/O pin. Trace port output
General purpose I/O pin. Connection for 32.768kHz
crystal (LFXO)
General purpose I/O pin. Connection for 32.768kHz
crystal (LFXO)
General purpose I/O pin. SAADC/COMP/LPCOMP
input
General purpose I/O pin. SAADC/COMP/LPCOMP
input
General purpose I/O pin. NFC antenna connection
General purpose I/O pin. NFC antenna connection
General purpose I/O pin. SAADC/COMP/LPCOMP
input
General purpose I/O pin. SAADC/COMP/LPCOMP
input
General purpose I/O pin. SAADC/COMP/LPCOMP
input
General purpose I/O pin. SAADC/COMP/LPCOMP
input
General purpose I/O pin. SAADC/COMP/LPCOMP
input
General purpose I/O pin. SAADC/COMP/LPCOMP
input
General purpose I/O pin
General purpose I/O pin
General purpose I/O pin
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
17
M905 Product Specification - Preliminary
No
32
33
34
35
36
37
38
39
Pin Name
GND
GND
P0.11
P0.19
P0.22
P0.23
P0.24
SWDCLK
Pin Type
Power
Power
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital input
40
41
42
43
44
45
46
47
48
49
50
51
52
SWDIO
GND
GND
GND
GND
P0.20/TRACECLK
GND
GND
GND
GND
GND
GND
GND
Digital I/O
Power
Power
Power
Power
Digital I/O
Power
Power
Power
Power
Power
Power
Power
Description
Ground (0V)
Ground (0V)
General purpose I/O pin
General purpose I/O pin
General purpose I/O pin
General purpose I/O pin
General purpose I/O pin
Serial wire debug clock input for debug and
programming
Serial wire debug I/O for debug and programming
Ground (0V)
Ground (0V)
Ground (0V)
Ground (0V)
General purpose I/O pin. Trace port clock output
Ground (0V)
Ground (0V)
Ground (0V)
Ground (0V)
Ground (0V)
Ground (0V)
Ground (0V)
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
18
M905 Product Specification - Preliminary
7. RECOMMEND FOOTPRINT
SMD Design:
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
19
M905 Product Specification - Preliminary
9. RECOMMEND REFLOW PROFILE
Profile Condition
a. Suitable for Lead-Free solder
b. Between 155~160°C: 60~90 sec.
c. Above 220°C: 60~90 sec.
d. Peak Temperature: 240~245 (<10 sec.)
All rights are reserved by ASE. No part of this technical document can be reproduced in any form without permission of ASE.
21
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible
for the FCC compliance requirement of the end product, which integrates this
module.
Appropriate measurements (e.g. 15 B compliance) and if applicable additional
equipment authorizations (e.g. Verification , Doc) of the host device to be addressed
by the integrator/manufacturer.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible
for the FCC compliance requirement of the end product, which integrates this
module.
20cm minimum distance has to be able to be maintained between the antenna and
the users for the host this module is integrated into. Under such configuration, the
FCC radiation exposure limits set forth for an population/uncontrolled environment
can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at
least 20cm separation with the antenna while this end product is installed and
operated. The end user has to be informed that the FCC radio-frequency exposure
guidelines for an uncontrolled environment can be satisfied. The end user has to also
be informed that any changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate this equipment. If the size of
the end product is smaller than the palm of the hand, then additional FCC part 15.19
statement is required to be available in the users manual: This device complies with
Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains
TX FCC ID: 2AJ9P-M905". If the size of the end product is larger than the palm of the
hand, then the following FCC part 15.19 statement has to also be available on the
label: This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Author                          : Lin Maxim
Subject                         : 
Create Date                     : 2017:08:04 04:08:21Z
Modify Date                     : 2017:11:17 11:32:01+08:00
Apple Keywords                  : 
Page Count                      : 22
PDF Version                     : 1.4
XMP Toolkit                     : 3.1-701
Producer                        : Mac OS X 10.11.6 Quartz PDFContext
Keywords                        : 
Creator Tool                    : Word
Title                           : M905 Product Specification v1.0 20161214
Creator                         : Lin Maxim
Description                     : 

EXIF Metadata provided by EXIF.tools