Multi Tech Systems 92U13A16855 MultiModem rCell 100Series Router User Manual tmp eHez6D

Multi Tech Systems Inc MultiModem rCell 100Series Router tmp eHez6D

Contents

User Guide

MultiConnect®rCell 100Series Router User Guide
MULTICONNECT® RCELL 100 SERIES ROUTER USER GUIDEMultiConnect®rCell 100 Series Router User GuideModel: MTR-EV3Part Number: S000582 Version: 1.0.4CopyrightThis publication may not be reproduced, in whole or in part, without the specific and express prior written permission signed by an executive officer ofMulti-Tech Systems, Inc. All rights reserved. Copyright © 2014 by Multi-Tech Systems, Inc.Multi-Tech Systems, Inc. makes no representations or warranties, whether express, implied or by estoppels, with respect to the content, information,material and recommendations herein and specifically disclaims any implied warranties of merchantability, fitness for any particular purpose and non-infringement.Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation ofMulti-Tech Systems, Inc. to notify any person or organization of such revisions or changes.Legal NoticesThe Multi-Tech products are not designed, manufactured or intended for use, and should not be used, or sold or re-sold for use, in connection withapplications requiring fail-safe performance or in applications where the failure of the products would reasonably be expected to result in personal injury ordeath, significant property damage, or serious physical or environmental damage. Examples of such use include life support machines or other lifepreserving medical devices or systems, air traffic control or aircraft navigation or communications systems, control equipment for nuclear facilities, ormissile, nuclear, biological or chemical weapons or other military applications (“Restricted Applications”). Use of the products in such RestrictedApplications is at the user’s sole risk and liability.MULTI-TECH DOES NOT WARRANT THAT THE TRANSMISSION OF DATA BY A PRODUCT OVER A CELLULAR COMMUNICATIONS NETWORK WILL BEUNINTERRUPTED, TIMELY, SECURE OR ERROR FREE, NOR DOES MULTI-TECH WARRANT ANY CONNECTION OR ACCESSIBILITY TO ANY CELLULARCOMMUNICATIONS NETWORK. MULTI-TECH WILL HAVE NO LIABILITY FOR ANY LOSSES, DAMAGES, OBLIGATIONS, PENALTIES, DEFICIENCIES, LIABILITIES,COSTS OR EXPENSES (INCLUDING WITHOUT LIMITATION REASONABLE ATTORNEYS FEES) RELATED TO TEMPORARY INABILITY TO ACCESS A CELLULARCOMMUNICATIONS NETWORK USING THE PRODUCTS.Contacting Multi-TechKnowledge BaseThe Knowledge Base provides immediate access to support information and resolutions for all Multi-Tech products. Visit http://www.multitech.com/kb.go.Support PortalTo create an account and submit a support case directly to our technical support team, visit: https://support.multitech.com.SupportBusiness Hours: M-F, 8am to 5pm CTCountry By Email By PhoneEurope, Middle East, Africa: support@multitech.co.uk +(44) 118 959 7774U.S., Canada, all others: support@multitech.com (800) 972-2439 or (763) 717-5863WarrantyTo read the warranty statement for your product, visit www.multitech.com/warranty.go. For other warranty options, visit www.multitech.com/es.go.World HeadquartersMulti-Tech Systems, Inc.2205 Woodale Drive, Mounds View, MN 55112Phone: (800) 328-9717 or (763) 785-3500Fax (763) 785-98742 MultiConnect®rCell 100 Series Router User Guide
CONTENTSContentsProduct Overview .................................................................................................................................................... 5About MultiConnect rCell 100 Series Router................................................................................................................ 5Documentation ........................................................................................................................................................... 5Descriptions of LEDs...................................................................................................................................................... 6Ethernet LED Descriptions ........................................................................................................................................... 6Side Panels .................................................................................................................................................................... 7Specifications ................................................................................................................................................................ 8Dimensions.................................................................................................................................................................. 10Power Draw MTR-EV3................................................................................................................................................. 11Safety Warnings..................................................................................................................................................... 12Lithium Battery ........................................................................................................................................................... 12Ethernet Ports ............................................................................................................................................................. 12Radio Frequency (RF) Safety ....................................................................................................................................... 12Interference with Pacemakers and Other Medical Devices ...................................................................................... 12Potential interference............................................................................................................................................... 12Precautions for pacemaker wearers ........................................................................................................................ 13Antenna....................................................................................................................................................................... 13Important Safety Instructions ..................................................................................................................................... 13Instructions de sécurité importantes.......................................................................................................................... 13Cellular Information............................................................................................................................................... 15Antenna System Cellular Devices................................................................................................................................ 15Requirements for Cellular Antennas with regard to FCC/IC Compliance ................................................................. 15EV-DO and CDMA Antenna Information..................................................................................................................... 15EV-DO and CDMA Authorized Antennas................................................................................................................... 15EV-DO and CDMA Antenna Requirements .............................................................................................................. 15Installing and Using the Router .............................................................................................................................. 16Installing the Router.................................................................................................................................................... 16Mounting the Device................................................................................................................................................... 16Activating the Account for Wireless Devices ............................................................................................................. 16Setting up GPS............................................................................................................................................................. 17Resetting the Device ................................................................................................................................................... 17Restoring User Defined Settings to the Device........................................................................................................... 17Resetting the Device to Factory Defaults .................................................................................................................. 17Regulatory Information.......................................................................................................................................... 18Notice for Devices that Use Aeris Radios.................................................................................................................... 1847 CFR Part 15 Regulation Class B Devices ................................................................................................................. 18Industry Canada Class B Notice................................................................................................................................... 18MultiConnect®rCell 100 Series Router User Guide 3
CONTENTSFCC Interference Notice.............................................................................................................................................. 19Restriction of the Use of Hazardous Substances (RoHS) ............................................................................................ 20REACH Statement ....................................................................................................................................................... 21Registration of Substances........................................................................................................................................ 21Substances of Very High Concern (SVHC) ................................................................................................................ 21Waste Electrical and Electronic Equipment Statement .............................................................................................. 21WEEE Directive.......................................................................................................................................................... 21Instructions for Disposal of WEEE by Users in the European Union ........................................................................ 21Information on HS/TS Substances According to Chinese Standards ......................................................................... 22Information on HS/TS Substances According to Chinese Standards (in Chinese) ...................................................... 234 MultiConnect®rCell 100 Series Router User Guide
PRODUCT OVERVIEWProduct OverviewAbout MultiConnect rCell 100 Series RouterThis guide describes the MultiConnect rCell 100 Series router. The rCell family of routers is carrier approved andready-to-deploy. You can use your device to provide secure data communication between many types of devicesthat use legacy as well as the latest communication technologies. Some device models support:■GPSThe router has an integrated cellular modem and includes 10/100 BaseT Ethernet and RS-232 serial connectivity.An image of the device follows:DocumentationThe following table describes additional documentation for your device. The documentation is available on theMulti-Tech Installation Resources website at www.multitech.com/setup/product.go.Document DescriptionUser Guide This document. Provides an overview, safety and regulatoryinformation, schematics and general device information.API guide You can use the rCell API to manage configurations, poll statistics, andissue commands. The design, patterns, and methods are documentedin the API Guide part number S000576.AT Commands This document describes AT commands that are available for yourdevice. These commands are documented in the Reference Guide partnumber S000546.MultiConnect®rCell 100 Series Router User Guide 5
PRODUCT OVERVIEWDescriptions of LEDsThe top panel contains the following LEDs:■Power and Status LEDs—The Power LED indicates that DC power is present and the Status LED blinks whenthe unit is functioning normally.■Modem LEDs—Two modem LEDs indicate carrier detection and link status.■Signal LEDs—Three signal LEDs display the signal strength level of the wireless connection.■Ethernet LEDs—These LEDs are not on the top panel. See the section Ethernet LED Descriptions fordescriptions of these LEDs.LED IndicatorsPOWER Indicates presence of DC power when lit.STATUS The LED is a solid light when the device is booting up, saving the configuration, restarting,or updating the firmware. When the Status LED begins to blink, the router is ready for use.CD Carrier Detect. When lit, indicates data connection has been established.LS Link StatusOFF—There is no power to the cellular radio.Continuously Lit—Powered, connected and transmitting and receiving data.Slow Blink (-0.2Hz) —Powered, connected and idle.Faster Blink (-3Hz)— Powered and searching for a connection.SIGNAL Signal strength for cellular.ALL OFF—Unit is off, not registered on network, or extremely weak signal (0 < = RSSI <6).1 Bar “ON”—Very weak signal (7 < = RSSI <14).1 Bar and 2 Bar “ON”—Weak signal (15 < = RSSI <23).1 Bar, 2 Bar, and 3 Bar “ON”—Good signal (24 <= RSSI > = 31).Ethernet LED DescriptionsTwo Ethernet LEDs are physically on the RJ-45 connector(s). The table that follows describes these LEDs.Ethernet Link Right LED on Ethernet connector. Blinks when there is transmit andreceive activity on the Ethernet link. It shows a steady light whenthere is a valid Ethernet connection.Ethernet Speed Left LED on Ethernet connector. Lit when the Ethernet is linked at 100Mbps. If it is not lit, the Ethernet is linked at 10 Mbps.6 MultiConnect®rCell 100 Series Router User Guide
PRODUCT OVERVIEWSide PanelsThe device has connectors on either side. The figures that follow show the connectors available on your model.A side panel of the device follows:Not all models have a GPS connector.The figure that follows shows the other side of the device.MultiConnect®rCell 100 Series Router User Guide 7
PRODUCT OVERVIEWSpecificationsMTR-EV3Category DescriptionGeneralPerformance CDMA2000 1xRTTEV-DO Rev. A (backward compatible to EV-DO Rev. 0 and CDMA 1x networks)Frequency Bands Dual-Band 800/1900 MHzRadioCellular Telit DE910-DUALSpeedPacket Data Up to 3.1 Mbps downlinkUp to 1.8 Mbps uplinkSMSSMS Point-to-Point MessagingMobile-Terminated SMSMobile-Originated SMSConnectorsCellular Female SMA connectors for cellularGPS Female SMA connectorWiFi Male SMA connectorPower RequirementsVoltage 7 V to 32 V DCPhysical DescriptionDimensions Dimensions are shown in the section “Dimensions” that follows.Weight 8.2 ounces or 230 gramsEnvironmentOperating -40° C to +85° CTemperatureHumidity Relative humidity 15% to 93% non-condensingCertifications, Compliance, Warranty8 MultiConnect®rCell 100 Series Router User Guide
PRODUCT OVERVIEWCategory DescriptionEMC Compliance FCC Part 15BSafety Compliance UL 60950-1Network Compliance AerisSprintVerizonRadio Compliance FCC Part 22FCC Part 24RSS 132RSS 133Warranty Two years*UL Listed @ 40° C, limited by power supply. UL Certification does not apply or extend to an ambient above 40° Cand has not been evaluated by UL for ambient greater than 40° C.UL has evaluated this device for use in ordinary locations only. Installation in a vehicle or other outdoor locationshas not been evaluated by UL. UL Certification does not apply or extend to use in vehicles or outdoor applicationsor in ambient above 40° C.Note: The radio’s performance may be affected at the temperature extremes. This is considered normal. There isno single cause for this function. Rather, it is the result of an interaction of several factors, such as the ambienttemperature, the operating mode and the transmit power.MultiConnect®rCell 100 Series Router User Guide 9
PRODUCT OVERVIEWDimensions10 MultiConnect®rCell 100 Series Router User Guide
PRODUCT OVERVIEWPower Draw MTR-EV3Cellular call box Average measured Peak TX amplitude Total inrush chargeconnection no data current (amps) at current (amps) measured in(amps) maximum power MilliCoulombs (mC)7 voltsUS Cellular 800 MHz 0.255 0.818 0.900 1.71US PCS 1900 MHz 0.255 0.848 0.924 1.719 voltsUS Cellular 800 MHz 0.2 0.630 0.7 2.65US PCS 1900 MHz 0.2 0.646 0.716 2.6532 voltsUS Cellular 800 MHz 0.069 0.188 0.232 4.27US PCS 1900 MHz 0.069 0.194 0.24 4.27Peak Tx: The peak current during a CDMA connection transmitting data at max power.Maximum Power: The continuous current during maximum data rate with the radio transmitter at maximumpowerInrush Charge: The total inrush charge at power on.MultiConnect®rCell 100 Series Router User Guide 11
SAFETY WARNINGSSafety WarningsLithium Battery■A lithium battery located within the product provides backup power for the timekeeping. This battery hasan estimated life expectancy of ten years.■When this battery starts to weaken, the date and time may be incorrect. If the battery fails, the board mustbe sent back to Multi-Tech Systems for battery replacement.■Lithium cells and batteries are subject to the Provisions for International Transportation. Multi-TechSystems, Inc. confirms that the Lithium batteries used in the Multi-Tech product(s) referenced in thismanual comply with Special Provision 188 of the UN Model Regulations, Special Provision A45 of the ICAO-TI/IATA-DGR (Air), Special Provision 310 of the IMDG Code, and Special Provision 188 of the ADR and RID(Road and Rail Europe).CAUTION: Risk of explosion if this battery is replaced by an incorrect type. Dispose of batteries according toinstructions.Attention: Pour réduire les risques d’incendie, utiliser uniquement des conducteurs de télécommunications 26AWG au de section supérleure.Ethernet PortsCAUTION: Ethernet ports and command ports are not designed to be connected to a public telecommunicationnetwork.Radio Frequency (RF) SafetyDue to the possibility of radio frequency (RF) interference, it is important that you follow any special regulationsregarding the use of radio equipment. Follow the safety advice given below.■Operating your device close to other electronic equipment may cause interference if the equipment isinadequately protected. Observe any warning signs and manufacturers’ recommendations.■Different industries and businesses restrict the use of cellular devices. Respect restrictions on the use ofradio equipment in fuel depots, chemical plants, or where blasting operations are in process. Followrestrictions for any environment where you operate the device.■Do not place the antenna outdoors.■Switch OFF your wireless device when in an aircraft. Using portable electronic devices in an aircraft mayendanger aircraft operation, disrupt the cellular network, and is illegal. Failing to observe this restrictionmay lead to suspension or denial of cellular services to the offender, legal action, or both.■Switch OFF your wireless device when around gasoline or diesel-fuel pumps and before filling your vehiclewith fuel.■Switch OFF your wireless device in hospitals and any other place where medical equipment may be in use.Interference with Pacemakers and Other Medical DevicesPotential interferenceRadiofrequency energy (RF) from cellular devices can interact with some electronic devices. This is electromagneticinterference (EMI). The FDA helped develop a detailed test method to measure EMI of implanted cardiac12 MultiConnect®rCell 100 Series Router User Guide
SAFETY WARNINGSpacemakers and defibrillators from cellular devices. This test method is part of the Association for theAdvancement of Medical Instrumentation (AAMI) standard. This standard allows manufacturers to ensure thatcardiac pacemakers and defibrillators are safe from cellular device EMI.The FDA continues to monitor cellular devices for interactions with other medical devices. If harmful interferenceoccurs, the FDA will assess the interference and work to resolve the problem.Precautions for pacemaker wearersIf EMI occurs, it could affect a pacemaker in one of three ways:■Stop the pacemaker from delivering the stimulating pulses that regulate the heart's rhythm.■Cause the pacemaker to deliver the pulses irregularly.■Cause the pacemaker to ignore the heart's own rhythm and deliver pulses at a fixed rate.Based on current research, cellular devices do not pose a significant health problem for most pacemaker wearers.However, people with pacemakers may want to take simple precautions to be sure that their device doesn't causea problem.■Keep the device on the opposite the side of the body from the pacemaker to add extra distancebetween the pacemaker and the device.■Avoid placing a turned-on device next to the pacemaker (for example, don’t carry the device in a shirtor jacket pocket directly over the pacemaker).AntennaThe antenna intended for use with this unit meets the requirements for mobile operating configurations and forfixed mounted operations, as defined in 2.1091 and 1.1307 of the FCC rules for satisfying RF exposure compliance.If an alternate antenna is used, consult user documentation for required antenna specifications.Important Safety InstructionsWhen using your telephone equipment, basic safety precautions should always be followed to reduce the risk offire, electric shock and injury to persons, including the following:1. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub,in a wet basement or near a swimming pool.2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remoterisk of electric shock from lightning.3. Do not use the telephone to report a gas leak in the vicinity of the leak.SAVE THESE INSTRUCTIONSInstructions de sécurité importantesDes mesures de sécurité de base doivent toujours être prises lors de l'utilisation de l'équipement téléphonique afinde réduire les risques d'incendie, d'électrocution ou de blessures corporelles. Ces mesures sont les suivantes:1. Ne pas utiliser ce produit à proximité de l'eau, comme par exemple près d'une baignoire, d'un bac delavage, d'un évier ou d'une cuve à lessive, dans une cave humide ou près d'une piscine.2. Éviter d'utiliser un téléphone (autre que sans fil) pendant un orage. Il existe un léger risqued'électrocution par la foudre.3. Ne pas utiliser le téléphone pour signaler une fuite de gaz à proximité de celle-ci.MultiConnect®rCell 100 Series Router User Guide 13
SAFETY WARNINGSCONSERVEZ CES INSTRUCTIONS14 MultiConnect®rCell 100 Series Router User Guide
CELLULAR INFORMATIONCellular InformationAntenna System Cellular DevicesThe cellular/wireless performance depends on the implementation and antenna design. The integration of theantenna system into the product is a critical part of the design process; therefore, it is essential to consider it earlyso the performance is not compromised. If changes are made to the device's certified antenna system, thenrecertification will be required by specific network carriers.Requirements for Cellular Antennas with regard to FCC/IC ComplianceThere cannot be any alteration to the authorized antenna system. The antenna system must maintain the samespecifications. The antenna must be the same type, with similar in-band and out-of-band radiation patterns.This device has been designed to operate with the antennas listed below and having a maximum gain for 850 MHzof <= 6.4 dBi , for 1700 MHz of <= 6.5 dBi, and for 1900 MHz of <= 3 dBi. Antennas not included in this list or thathave a gain greater than specified are strictly prohibited for use with this device. The required antenna impedanceis 50 ohms.EV-DO and CDMA Antenna InformationEV-DO and CDMA Authorized AntennasThese devices were approved with the following antenna:Manufacturer: Exceltek Electronics Ltd.Manufacturer's Model Number: C0081-ANG0002Multi-Tech ordering information:Model QuantityANQB-1HRA 1ANQB-10HRA 10ANQB-50HRA 50EV-DO and CDMA Antenna RequirementsCategory DescriptionFrequency Range 824 - 894 MHz / 1850 - 1990 MHzImpedance 50 OhmsVSWR VSWR should not exceed 2.0:1 at any point across the bands of operationTypical Radiated Gain 2 dBi on azimuth planeRadiation Omni-directionalPolarization Linear verticalMultiConnect®rCell 100 Series Router User Guide 15
INSTALLING AND USING THE ROUTERInstalling and Using the RouterInstalling the Router1. To use the router’s cellular features, connect a suitable antenna to the antenna connector.2. Using an Ethernet cable, connect one end of the cable to the ETHERNET connector on the back of therouter and the other end to your computer, either directly or through a switch or hub.3. If you are connecting to a serial interface, connect the DE9 connector (9-pin) of the RS232 cable to theRS232 connector on the router, then connect the other end to the serial port on the desired device.4. Some routers support the use of a GPS receiver. If you are using a GPS receiver with the router, attachthe GPS cable to the GPS connector on the router.5. Attach a power cable to your power supply module.6. Screw-on the power lead from the power supply module into the power connection on the router.7. Plug the power supply into your power source.The POWER LED lights after the device powers up.When the Status LED begins to blink, the device is ready for use.8. You can configure your router by using your router’s web management Interface. You might need tochange the IP address of your computer to be in the same IP and subnet mask range as the device.a. Open an Internet browser. In the browser's address field, type the default address for therouter: http://192.168.2.1.b. A login page opens. In the username field, type the default user name: admin (all lower-case).c. In the password field, type the default password: admin (all lower-case).d. Click Login. The Web Management Home page opens. Online documentation includedwith the web management interface describes how to configure your routerMounting the Device1. Locate the groove on the bottom of the modem.2. Slide the mounting rod through the groove.3. To secure the rod to the desired surface, place and tighten two screws in the holes on either end of themounting rod. The dimensions illustration in this guide shows the mounting rod, as well as thedimensions for placement of the screws.Activating the Account for Wireless DevicesRefer to Multi-Tech’s Cellular Activation Web site at http://www.multitech.com/activation.go for information onactivating your cellular modem.Note: If you need remote access to your MultiConnect device over the Internet for remote configuration,ensure that your wireless network provider has provisioned mobile terminated data and fixed or dynamicpublic IP address in which they can configure the network to redirect any incoming connection to thatpredefined IP.16 MultiConnect®rCell 100 Series Router User Guide
INSTALLING AND USING THE ROUTERSetting up GPSIf your model can support a GPS, see the online help file for information on working with a GPS.Resetting the DeviceTo reset the device, when desired:1. Find the hole in the panel labeled RESET. The reset button is recessed into the case.2. To access the reset button, find a pin or similar thin object that can fit through the reset hole.3. Use the pin to quickly press and release the RESET button.4. Release the pin from the reset button. The device reboots.Restoring User Defined Settings to the DeviceYou can restore user defined settings to your device.1. Find the hole in the panel labeled RESET. The reset button is recessed into the case.2. To access the reset button, find a pin or similar thin object that can fit through the reset hole.3. Use the pin to press in the button for about 3 seconds and then release the RESET button. The user-defined configuration settings are restored.Resetting the Device to Factory DefaultsYou can reset the device so that custom configuration settings are cleared and replaced with default configurationsettings. Default settings can include OEM specific settings. To reset the device to factory default settings:1. Press and Hold the button until the Status LED becomes solid.2. Release the button for the reset to complete3. The device reboots.MultiConnect®rCell 100 Series Router User Guide 17
REGULATORY INFORMATIONRegulatory InformationNotice for Devices that Use Aeris RadiosOne component of your device is a radio. A radio algorithm prevents your device from repeatedly attempting toconnect to the network when the radio:■cannot establish a packet data connection or■fails to access the application server.When writing applications for your devices, ensure that your applications do not interfere with the radio'sconnection retry algorithm. If you fail to do so, Aeris might block network access for your devices.After your devices reach the end of their commercial lifespan, you must remove them from the Aeris network. Todo so, remove power from the devices and remove their antennas. If your devices continue to attempt to registerwith the network after you cancel device subscriptions, Aeris can bill you for any traffic generated by thosedevices.47 CFR Part 15 Regulation Class B DevicesThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more of the following measures:■Reorient or relocate the receiving antenna.■Increase the separation between the equipment and receiver.■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.■Consult the dealer or an experienced radio/TV technician for help.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.Industry Canada Class B NoticeThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le matérielbrouilleur.This device complies with Industry Canada RSS Appliance radio exempt from licensing. The operation is permittedfor the following two conditions:1. the device may not cause harmful interference, and2. the user of the device must accept any interference suffered, even if the interference is likely tojeopardize the operation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes:18 MultiConnect®rCell 100 Series Router User Guide
REGULATORY INFORMATION1. l'appareil ne doit pas produire de brouillage, et2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage estsusceptible d'en compromettre le fonctionnement.FCC Interference NoticeThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Thisdevice may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operationMultiConnect®rCell 100 Series Router User Guide 19
REGULATORY INFORMATIONRestriction of the Use of Hazardous Substances (RoHS)Multi-Tech Systems, IncCertificate of Compliance2011/65/EUMulti-Tech Systems confirms that its embedded products comply with the chemical concentration limitations setforth in the directive 2011/65/EU of the European Parliament (Restriction of the use of certain HazardousSubstances in electrical and electronic equipment - RoHS).These Multi-Tech products do not contain the following banned chemicals1:■Lead, [Pb] < 1000 PPM■Mercury, [Hg] < 1000 PPM■Hexavalent Chromium, [Cr+6] < 1000 PPM■Cadmium, [Cd] < 100 PPM■Polybrominated Biphenyl, [PBB] < 1000 PPM■Polybrominated Diphenyl Ether, [PBDE] < 1000 PPMEnvironmental considerations:■Moisture Sensitivity Level (MSL) =1■Maximum Soldering temperature = 260C (in SMT reflow oven)1Lead usage in some components is exempted by the following RoHS annex, therefore higher lead concentrationwould be found in some modules (>1000 PPM);- Resistors containing lead in a glass or ceramic matrix compound.20 MultiConnect®rCell 100 Series Router User Guide
REGULATORY INFORMATIONREACH StatementRegistration of SubstancesAfter careful review of the legislation and specifically the definition of an “article” as defined in EC Regulation1907/2006, Title II, Chapter 1, Article 7.1(a)(b), it is our current view Multi-Tech Systems, Inc. products would beconsidered as “articles”. In light of the definition in § 7.1(b) which requires registration of an article only if itcontains a regulated substance that “is intended to be released under normal or reasonably foreseeable conditionsof use,” Our analysis is that Multi-Tech Systems, Inc. products constitute nonregisterable articles for their intendedand anticipated use.Substances of Very High Concern (SVHC)Per the candidate list of Substances of Very High Concern (SVHC) published October 28, 2008 we have reviewedthese substances and certify the Multi-Tech Systems, Inc. products are compliant per the EU “REACH”requirements of less than 0.1% (w/w) for each substance. If new SVHC candidates are published by the EuropeanChemicals Agency, and relevant substances have been confirmed, that exceeds greater than 0.1% (w/w), Multi-Tech Systems, Inc. will provide updated compliance status.Multi-Tech Systems, Inc. also declares it has been duly diligent in ensuring that the products supplied are compliantthrough a formalized process which includes collection and validation of materials declarations and selectivematerials analysis where appropriate. This data is controlled as part of a formal quality system and will be madeavailable upon request.Waste Electrical and Electronic Equipment StatementWEEE DirectiveThe WEEE Directive places an obligation on EU-based manufacturers, distributors, retailers, and importers to take-back electronics products at the end of their useful life. A sister directive, ROHS (Restriction of HazardousSubstances) complements the WEEE Directive by banning the presence of specific hazardous substances in theproducts at the design phase. The WEEE Directive covers all Multi-Tech products imported into the EU as of August13, 2005. EU-based manufacturers, distributors, retailers and importers are obliged to finance the costs of recoveryfrom municipal collection points, reuse, and recycling of specified percentages per the WEEE requirements.Instructions for Disposal of WEEE by Users in the European UnionThe symbol shown below is on the product or on its packaging, which indicates that this product must not bedisposed of with other waste. Instead, it is the user's responsibility to dispose of their waste equipment by handingit over to a designated collection point for the recycling of waste electrical and electronic equipment. The separatecollection and recycling of your waste equipment at the time of disposal will help to conserve natural resourcesand ensure that it is recycled in a manner that protects human health and the environment. For more informationabout where you can drop off your waste equipment for recycling, please contact your local city office, yourhousehold waste disposal service or where you purchased the product.July, 2005MultiConnect®rCell 100 Series Router User Guide 21
REGULATORY INFORMATIONInformation on HS/TS Substances According to Chinese StandardsIn accordance with China's Administrative Measures on the Control of Pollution Caused by Electronic InformationProducts (EIP) # 39, also known as China RoHS, the following information is provided regarding the names andconcentration levels of Toxic Substances (TS) or Hazardous Substances (HS) which may be contained in Multi-TechSystems Inc. products relative to the EIP standards set by China's Ministry of Information Industry (MII).Hazardous/Toxic Substance/ElementsName of the Component Lead Mercury Cadmium Hexavalent Polybromi Polybrominat(PB) (Hg) (CD) Chromium nated ed Diphenyl(CR6+) Biphenyl Ether (PBDE)(PBB)Printed Circuit Boards O O O O O OResistors X O O O O OCapacitors X O O O O OFerrite Beads O O O O O ORelays/Opticals O O O O O OICs O O O O O ODiodes/ Transistors O O O O O OOscillators and Crystals X O O O O ORegulator O O O O O OVoltage Sensor O O O O O OTransformer O O O O O OSpeaker O O O O O OConnectors O O O O O OLEDs O O O O O OScrews, Nuts, and other X O O O O OHardwareAC-DC Power Supplies O O O O O OSoftware /Documentation CDs O O O O O OBooklets and Paperwork O O O O O OChassis O O O O O OXRepresents that the concentration of such hazardous/toxic substance in all the units of homogeneousmaterial of such component is higher than the SJ/Txxx-2006 Requirements for Concentration Limits.ORepresents that no such substances are used or that the concentration is within the aforementioned limits.22 MultiConnect®rCell 100 Series Router User Guide
REGULATORY INFORMATIONInformation on HS/TS Substances According to Chinese Standards (inChinese)依依照照中中国国标标准准的的有有毒毒有有害害物物质质信信息息根据中华人民共和国信息产业部 (MII) 制定的电子信息产品 (EIP) 标准－中华人民共和国《电子信息产品污染控制管理办法》（第 39 号），也称作中国 RoHS, 下表列出了 Multi-Tech Systems, Inc. 产品中可能含有的有毒物质 (TS) 或有害物质 (HS) 的名称及含量水平方面的信息。有有害害//有有毒毒物物质质//元元素素成成分分名名称称 铅铅 (PB) 汞汞 (Hg) 镉镉 (CD) 六六价价铬铬 (CR6+) 多多溴溴联联苯苯 多多溴溴二二苯苯醚醚(PBB) (PBDE)印刷电路板 O O O O O O电阻器 X O O O O O电容器 X O O O O O铁氧体磁环 O O O O O O继电器/光学部件 O O O O O OOICs O O O O O O二极管/晶体管 O O O O O O振荡器和晶振 X O O O O O调节器 O O O O O O电压传感器 O O O O O O变压器 O O O O O O扬声器 O O O O O O连接器 O O O O O OLEDs O O O O O O螺丝、螺母以及其它五金件 X O O O O O交流-直流电源 O O O O O O软件/文档 CD O O O O O O手册和纸页 O O O O O O底盘 O O O O O OX表示所有使用类似材料的设备中有害/有毒物质的含量水平高于 SJ/Txxx-2006 限量要求。O表示不含该物质或者该物质的含量水平在上述限量要求之内。MultiConnect®rCell 100 Series Router User Guide 23

Navigation menu