Multiquip Lt12D Users Manual
LT12D to the manual 19447516-7615-4b98-a19a-8e398865504a
2015-02-09
: Multiquip Multiquip-Lt12D-Users-Manual-558200 multiquip-lt12d-users-manual-558200 multiquip pdf
Open the PDF directly: View PDF 
.
Page Count: 58
| Download | |
| Open PDF In Browser | View PDF |
Parts Manual NIGHTHAWK SERIES MODELs lt12d, LT12P dedicated light tower (DEUTZ F3M1008F DIESEL ENGINE) (LOMBARDINI LDW 1003 DIESEL ENGINE) (PERKINS 103-10 DIESEL ENGINE) Revision #17 (06/03/11) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES. PN 49119 Table of Contents LT12 Series Light Tower Table Of Contents..................................................... 2 Parts Ordering Procedures....................................... 3 Explanation Of Code In Remarks Column............... 4 Suggested Spare Parts............................................ 5 Nameplates And Decals 1..................................... 6-7 Nameplate And Decals 2....................................... 8-9 Cabinet Assembly (Old Style)............................ 10-11 Cabinet Assembly (New Style).......................... 12-13 Trailer Assembly................................................ 14-15 Mast Assembly.................................................. 16-17 Mast Raise/Lower Assembly............................. 18-19 Winch Assembly (Fulton)................................... 20-21 Winch Assembly (Dutton-Lainson).................... 22-23 T-Bar Assembly (S/N 901681 And Below)......... 24-25 T-Bar Assembly (S/N 901682 And Above)......... 26-27 Lamp Assembly (S/N 901681 And Below)........ 28-29 Lamp Assembly (S/N 901682 And Above)........ 30-31 Control Panel/Ballast Assy. (S/N 904384 & Below).32-33 Control Panel/Ballast Assy. (S/N 904385 & Above).34-35 Fuel Tank Assembly........................................... 36-37 Battery Assembly.............................................. 38-39 Engine Assembly (Perkins)................................ 40-41 Engine Assembly (Deutz/Lombardini)............... 42-43 Generator/Engine Mounting Assy. (Perkins)....... 44-45 Generator/Engine Mounting Assembly........................ (Old Style Deutz/Lombardini)............................ 46-47 Generator/Engine Mounting Assembly....................... (Deutz/LombardIni S/N 904548 And Above)..... 48-49 Generator Assembly (S/N 902148 And Below). 50-51 Generator Assembly (S/N 902149 And Above).52-53 Coil Cord Assembly........................................... 54-55 Terms And Conditions Of Sale — Parts................. 56 NOTICE Part numbers are subject to change without notice. page 2 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) www.multiquip.com Parts Ordering Procedures Ordering parts has never been easier! choose from three easy options: Order via internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information. Use the internet and qualify for a 5% Discount on Standard orders for all orders which include complete part numbers.* Goto www.multiquip.com and click on Order Parts to log in and save! Note: Discounts Are Subject To Change Order via Fax (Dealers Only): All customers are welcome to order parts via Fax. Domestic (uS) Customers dial: 1-800-6-PARTS-7 (800-672-7877) Fax your order in and qualify for a 2% Discount on Standard orders for all orders which include complete part numbers.* Note: Discounts Are Subject To Change Order via phone: Domestic (uS) Dealers Call: 1-800-427-1244 non-Dealer Customers: Contact your local Multiquip Dealer for parts or call 800-427-1244 for help in locating a dealer near you. International Customers should contact their local Multiquip Representatives for Parts Ordering information. When ordering parts, please supply: ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) return Fax number applicable model number Quantity, part number and Description of each part ❒ Specify preferred method of Shipment: ✓ UPS/Fed Ex ✓ DHL ■ Priority One ✓ Truck ■ Ground ■ Next Day ■ Second/Third Day NOTICE All orders are treated as Standard Orders and will ship the same day if received prior to 3PM PST. We aCCepT aLL maJOr CreDiT CarDS! LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 3 Explanation of Code in Remarks Column The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SampLe parTS LiST nO. 1 2% 2% 3 4 parT nO. parT name QTY. remarkS 12345 BOLT......................1 .....INCLUDES ITEMS W/% WASHER, 1/4 IN............NOT SOLD SEPARATELY 12347 WASHER, 3/8 IN....1 .....MQ-45T ONLY 12348 HOSE ..................A/R ...MAKE LOCALLY 12349 BEARING ..............1 .....S/N 2345B AND ABOVE nO. Column QTY. Column numbers used — Item quantity can be indicated by a number, a blank entry, or A/R. A/R (As Required) is generally used for hoses or other parts that are sold in bulk and cut to length. A blank entry generally indicates that the item is not sold separately. Other entries will be clarified in the “Remarks” Column. remarkS Column Some of the most common notes found in the “Remarks” Column are listed below. Other additional notes needed to describe the item can also be shown. assembly/kit — All items on the parts list with the same unique symbol will be included when this item is purchased. unique Symbols — All items with same unique symbol Indicated by: “INCLUDES ITEMS W/(unique symbol)” (@, #, +, %, or >) in the number column belong to the same assembly or kit, which is indicated by a note in the “Remarks” column. Serial number Break — Used to list an effective serial number range where a particular part is used. Duplicate item numbers — Duplicate numbers indicate multiple part numbers, which are in effect for the same general item, such as different size saw blade guards in use or a part that has been updated on newer versions of the same machine. NOTICE When ordering a part that has more than one item number listed, check the remarks column for help in determining the proper part to order. parT nO. Column numbers used — Part numbers can be indicated by a number, a blank entry, or TBD. TBD (To Be Determined) is generally used to show a part that has not been assigned a formal part number at the time of publication. A blank entry generally indicates that the item is not sold separately or is not sold by Multiquip. Other entries will be clarified in the “Remarks” Column. Indicated by: “S/N XXXXX AND BELOW” “S/N XXXX AND ABOVE” “S/N XXXX TO S/N XXX” Specific model number use — Indicates that the part is used only with the specific model number or model number variant listed. It can also be used to show a part is NOT used on a specific model or model number variant. Indicated by: “XXXXX ONLY” “NOT USED ON XXXX” “make/Obtain Locally” — Indicates that the part can be purchased at any hardware shop or made out of available items. Examples include battery cables, shims, and certain washers and nuts. “not Sold Separately” — Indicates that an item cannot be purchased as a separate item and is either part of an assembly/kit that can be purchased, or is not available for sale through Multiquip. page 4 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) Suggested Spare Parts LT12 SERIES LIGHT TOWER with OLD STYLE LAMP S/N 901681 AND BELOW LT12 SERIES LIGHT TOWER with NEW STYLE LAMP S/N 901682 AND ABOVE 1 to 3 units 1 to 3 units Qty. P/N Description 2..........43007020200.............Clamp, Light 2..........2450108.....................Lens Gasket 2..........5550079.....................Lens and Gasket 2..........29560.........................Support, Top Lamp 1000 Watt 2..........M1000U......................Bulb 2..........4105012.....................Reflector (without glass) 1..........29169.........................Cord Set Molded Qty. P/N Description 2..........200ZG106..................Lens Gasket 2..........190ZQREF.................Lens 2..........50Z-D-REF-SUP........Support, Lamp Tip 2..........MVR1000BT37...........Bulb 1..........150Z-E267.................Cord Set, 60" w/ 3 Pin Male Plug LT12 SERIES LIGHT TOWER with OLD ST YLE SQUARE GENERATOR S/N 902148 AND BELOW LT12 SERIES LIGHT TOWER with new ST YLE round GENERATOR S/N 902149 AND above 1 to 3 units 1 to 3 units Qty. P/N Description 1..........M1000120AC5M........Ballast/Transformer 60Hz 1..........19598.........................Ballast Capacitor 24 µF @480V 2..........GECAP18MF.............Excitation Capacitor 18µF @425V 1............GECAP35MF.................Excitation Capacitor 35µF @425V Qty. P/N Description 1..........M1000120AC5M........Ballast/Transformer 60Hz 1..........19598.........................Ballast Capacitor 24 µF @480V 1..........GECAP25MF.............Excitation Capacitor 25 µF @425V LT12p LIGHT TOWER with perkins 103-10 DIESEL engine LT12D LIGHT TOWER with DEUTZ F3M1008F OR LOMBARDINI LDW 1003 DIESEL engine 1 to 3 units 1 to 3 units Qty. P/N Description 1............140517000....... Oil Filter 1............26560017......... Fuel Filter 1............36510362......... Element, Air Filter 1............80109049......... V-Belt, Fan 1............3483H043......... Lower Radiator Hose 1............3483H034......... Upper Radiator Hose 1............145206210....... Thermostat 1............145996590....... Thermostat Gasket (O-Ring) 1............130506290....... Fuel (Feed) Pump Lift 1............2415A070......... Fuel (Feed) Pump Gasket (O-Ring) 1............145016474....... Water Pump 1............145996900....... Water Pump Gasket 1............185246060....... Oil Switch 1............185046160....... Alternator 1............100AC............... Electric Panel Control Box 1............185086610....... Starter Qty. P/N Description 1............2175107........... Oil Filter, Lombardini 1............12850312......... Oil Filter, Deutz 1............2175046........... Fuel Filter 4-3/4"L 1............12850347......... Fuel Filter 2-3/4"L 1............2175143S......... Fuel Filter W/Water Drain 1............2175164........... Air Filter 1............12850745......... Fan Belt 875mm 1............12851312......... Lower Radiator Hose 1............12850362......... Upper Radiator Hose 1............9195124........... Thermostat 1............12850153......... Thermostat Gasket (O-Ring) 1............6585097........... Fuel (Feed) Pump 1............1200087........... Fuel (Feed) Pump Gasket (O-Ring) 1............6584438........... Water Pump 1............4580083........... Water Pump Gasket 1............6745056........... Oil Switch 1............12850742......... Alternator 1............7245454........... Electric Panel Control Box 1............5840224........... Starter 1............2440338........... Timing Belt 1............5460450........... Muffler 1............4400102........... Valve Cover Gasket LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 5 NAMEPLATES AND DECALS 1 7 8 1 2 FRONT 6 3 4 9 20 21 5 16 RIGHT 24 22 28 21 25 29 WARNING 26 P/N 36092 23 RIGHT DOOR LEFT DOOR 27 page 6 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) NAMEPLATES AND DECALS 1 NO. 1 2 3 4 5 6 7 8 9 16 20 21 22 23 24 25 26 27 28 29 PART NO. 49019 29722 49015 49009 49008 49025 29729 13118 29126 49026 49012 35137 49029 49011 49020 49014 20525 49006 49022 36092 PART NAME QTY. REMARKS DECAL, HOT SURFACE......................................... 1..... REPLACES DCL181 DECAL, 220 VAC POWER 25A, 1.0" X 2.0" 1 DECAL, 115 VAC OUTLET..................................... 1..... REPLACES DCL199 DECAL, TOWING INSTRUCTIONS........................ 1..... REPLACES DCL112 DECAL, GROUND LUG.......................................... 1..... REPLACES DCL105 DECAL, MQ LOGO 5.6 X 4.5, RED 1 DECAL, NATM MANUFACTURER COMPLIANCE 1 DECAL, POWDER COATED 1 DECAL, INSERT FORKS........................................ 1..... REPLACES DCL103 DECAL, MQ/MULTIQUIP, 36" RED 1 DECAL, LOOSEN TO TURN (MAST)..................... 1..... REPLACES DCL116 DECAL, READ MANUAL, ASK FOR TRAINING 2 DECAL, NIGHTHAWK/LT12, CURB SIDE 1 DECAL, LAMPS...................................................... 1..... REPLACES DCL113, DCL117 DECAL, SHOCK HAZARD, LARGE........................ 1..... REPLACES DCL102 DECAL, OPERATING INSTRUCTIONS.................. 1..... REPLACES DCL119, DCL180, DCL182, 36090 DECAL, WARNING "PROP 65", 3.25 X 4.25 1 DECAL, CHECK ENGINE....................................... 1..... REPLACES DCL193, DCL194 DECAL, DANGER BATTERY/MOVING PARTS...... 1..... REPLACES DCL182, DCL191 DECAL, DIESEL FUEL, 3.5 X 1.75......................... 1..... REPLACES DCL184 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 7 NAMEPLATES AND DECALS 2 18 33 P/N 29047 35 LT P/N 49007 240 VAC/30A MAIN BREAKER 120 VAC/15A G.F.C.I. BREAKER 17 CONTROL PANEL 19 REAR 16 34 15 10 36 T 9 14 1 01 LEFT MULTIPLE TRAILER VIN 12 11 13 31 30 30 32 TOP 30 page 8 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) NAMEPLATES AND DECALS 2 NO. 9 10 11 12 13 14 15 16 17 18 19 30 31 32 33 34 35 36 PART NO. 29126 49018 29680 29838 49002 49013 49028 49026 29132 29047 49027 49016 36091 29651 49007 49010 19655 49021 PART NAME QTY. REMARKS DECAL, INSERT FORKS......................................1.............REPLACES DCL103 DECAL, MAST LOCK PIN....................................1.............REPLACES DCL118 DECAL, MULTIPLE TRAILER VIN 1 DECAL, TIRE LOADING, LT12 1 DECAL, TRLR HITCH/WHEEL WARNING...........1.............REPLACES 29471, 29472, 29473, 29474 DECAL, STANCHION LATCH...............................1.............REPLACES DCL109, DCL104 DECAL, NIGHTHAWK/LT12, ROAD SIDE 1 DECAL, MQ/MULTIQUIP, 36" RED 1 DECAL, SHUT DOWN 1 DECAL, HIGH VOLTAGE 1 DECAL, MQ/MULTIQUIP, 30" RED 1 DECAL, HORIZONTAL JACKS.............................3.............REPLACES DCL106 DECAL, HOT COOLANT 3.5 X 1.75.....................1.............REPLACES DCL183 DECAL, MAST SAFETY.......................................1.............REPLACES DCL108, DCL120 DECAL, MAIN BREAKERS..................................1.............REPLACES DCL189, DCL199 DECAL, LIGHT CONTROLS.................................1.............REPLACES DCL115 DECAL, DANGER HIGH VOLTAGE......................1.............REPLACES 29116 DECAL, SHOCK HAZARD, SMALL......................1.............REPLACES DCL187 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 9 CABINET ASSY. (oLD sTYLE) 28 51 52 19 22 48 27 1 5 48 1 5 1 47 1 49 49 46 32 15 31 9 5 26 33 8 5 2 1 5 5 1 53 4 1 9 14 2 15 49 46 48 34 47 8 16 23 3 15 18 16 15 16 18 19 24 21 11 PART OF TRAILER 17 20 19 17 11 12 NOTES INCLUDED WITH ITEM 9, 1 DOOR HOLD BACK ASSY. 11 OLD STYLE REAR PANEL NO LONGER 2 AVAILABLE. WHEN REPLACING PANEL, USE P/N 29559, REAR PANEL ASSY. 1 PIANO HINGE AND RIVETS 5 3 INCLUDED WITH ITEM 53, DOOR ASSY. 4 OLD STYLE DOOR NO LONGER AVAILABLE. WHEN REPLACING DOOR, USE P/N 49051, DOOR ASSY. 3 7 6 page 10 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) 1 CABINET ASSY. (oLD sTYLE) NO. PART NO. 1 12287 2 29057 3 29561 5 19266 6 29563 7 29564 8@ 19847 9@ 29281 11 10024 12 29653 14 15@ 5065 B 16 10237 17 10019 18 29712 19 0948 20 29610 21 29611 22 29607 23 29552 24 29663 26 29615 27 29553 28 29690 31 29711 32 29682 32 29683 33@ 081407053413 34@ 46@ 29689 47@ 1618 48@ 29341 49@ 29342 51 0131 A 52 0181 B 53 PART NAME QTY. REMARKS SCREW, THP 1/4-20 X 3/4 SS 68 DOCUMENT BOX, CP20007-07 1 PANEL, LOWER LEFT SIDE 1 NUT, BLIND 1/4-20 X 10GA GRIP 64 LIGHT, 2" ROUND, AMBER, M146A 2 GROMMET, W/WIRE KIT, 2", 24146-18K 4 RIVET 50 DOOR HOLD BACK ASSY. 2 NUT, NYLOC 1/4-20 5 TANK, COOLANT RECOVERY 1 QT 1 PANEL, REAR...................................................................1............ NO LONGER AVAILABLE ........................................................................................................ S/N 903837 AND BELOW SCREW, PHP 10-32 X 1/2 12 WASHER, EXT. SHKP, #10 6 NUT, NYLOC 10-32 4 BOLT, CARRIAGE 1/4-20 x 3/4 4 WASHER, FLAT SAE 1/4 7 LIGHT KIT, STOP/TAIL 2 LIGHT, 2" ROUND RED M146R 2 BRACKET, LIGHT SWITCH 1 BRACKET, LICENSE PLATE W/LIGHT 1 PANEL, LOWER RIGHT SIDE 1 PANEL, FRONT W/A DLT 1 PANEL, TOP 1 COVER, PLASTIC SNAP 3.0 HOLE 1 BUMPER, 1/2 DIA. BLACK 10 COVER, BALLAST, PERKINS 1 COVER, BALLAST, DEUTZ/ LOMBARDINI 1 LATCH 2 PIANO HINGE 2 PLATE, DOOR HOLD BACK 2 NUT, NYLOC 10-24 8 RIVET, POP, SS, 3/16x1/4-3/8 GRIP 10 WASHER, 3/16" POP-RIVET BACKUP SS 8 10 SCREW, HHC 1/4-20 x .75 2 WASHER, LOCK 1/4 MED 2 DOOR ASSY......................................................................2............ NO LONGER AVAILABLE ........................................................................................................ MAY 2007 AND BELOW ........................................................................................................ USE NEW P/N 49051 ........................................................................................................ INCLUDES ITEMS W/@ LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 11 CABINET ASSY. (nEW sTYLE) 28 1 2 22 8 27 1 5 8 1 5 1 1 32 8 31 9 5 26 33 8 5 2 1 5 5 42 1 1 37 9 45 35 44 36 36 38 8 18 39 34 12 8 13 14 18 15 40 16 15 24 19 15 11 16 PART OF TRAILER 17 23 18 20 19 21 17 NOTES 1 INCLUDED WITH ITEM 9, DOOR HOLD BACK ASSY. 11 LIGHT SWITCH BRACKET INCLUDED 2 WITH ITEM 42, DOOR ASSY. 5 SEE CONTROL PANEL ASSY. 3 7 6 page 12 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) 1 CABINET ASSY. (nEW sTYLE) NO. PART NO. 1 49048 2 29057 3 29816 5 19266 6 29898 7 29900 8% 19847 9% 29281 11 10024 12 29653 13 49070 14@ 29940 15 5065 B 16 10237 17 10019 18 29712 19 0948 20 29610 21 29899 22% 29607 23 29552 24 29817 26 29866 27 29553 28 29989 31% 29711 32 29879 33% 081407053413 34% 35@ 29945 36@ 19280 37@ 1023 38@ 10136 39@ 10133 40 29797 42 49051 44 29559 45@ 29946 PART NAME QTY. REMARKS SCREW, HHFS 1/4-20 X 3/4 GR5 48 DOCUMENT BOX, CP20007-07 1 PANEL, LOWER LEFT SIDE 1 NUT, BLIND 1/4-20 X 10GA GRIP 48 LIGHT, 2-1/2 SIDE MARKER, AMBER, 143A 2 GROMMET, W/WIRE KIT, 2-1/2", 14218K 4 RIVET, POP, ALUM, 3/16 X 1/8-1/4 GRIP 66 DOOR HOLD BACK ASSY. 2 NUT, NYLOC 1/4-20 5 TANK, COOLANT RECOVERY 1 QT 1 NUT, FLANGED 1/4-20 SERRATED PLTD 4 PANEL, REAR 1 SCREW, PHP 10-32 X 1/2 6 WASHER, EXT. SHKP, #10 4 NUT, NYLOC 10-32 4 BOLT, CARRIAGE 1/4-20 X 3/4 9 WASHER, FLAT SAE 1/4 5 LIGHT KIT, STOP/TAIL 2 LIGHT, 2-1/2 SIDE MARKER, RED 143R 2 BRACKET, LIGHT SWITCH 1 BRACKET, LICENSE PLATE W/LIGHT 1 PANEL, LOWER RIGHT SIDE 1 PANEL, FRONT W/A DLT SNAP 1 PANEL, TOP 1 COVER, PLASTIC SNAP 4.0 HOLE 1 BUMPER, 1/2 DIA. BLACK 6 COVER, BALLAST DLT, SNAP FIT SWITCH DEUTZ/LOMBARDINI 1 LATCH 2 PIANO HINGE MAST SUPPORT 1 PIN, 5/8" X 6" 1 SCREW, HHC 3/8-16 X 1-1/4 GR 5 4 WASHER, FLAT SAE 3/8 4 NUT, NYLOC 3/8-16 4 NUT, BLIND 10-32 X .02/.13 GRIP 2 DOOR ASSY......................................................................2............ INCLUDES ITEMS W/% ........................................................................................................ JUNE 2007 AND ABOVE REAR PANEL ASSY..........................................................1............ INCLUDES ITEMS W/@ ........................................................................................................ S/N 903838 AND ABOVE STOP, MAST SUPPORT, 3/8" 1 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 13 Trailer Assy. 3 3 44 2 7 1 44 5 9 8 8 4 3 46 13 17 12 7 16 10 47 11 5 4 15 16 18 45 20 21 15 19 2 22 23 24 31 32 33 6 35 37 25 26 1 36 34 38 39 2 OLD STYLE FRAME T NE I AB LO W ER PA L NE NEW STYLE FENDER C 28 28 42 40 27 28 29 29 30 30 43 41 42 29 30 OLD STYLE FENDER NOTES: TORQUE LUG NUTS PER LUG NUT 1 TORQUE TABLE REFERENCED IN OPERATION MANUAL. OLD STYLE FRAME NO LONGER AVAILABLE. WHEN ORDERING NEW 2 FRAME, IF YOU HAVE METAL FENDERS, YOU MUST ALSO PURCHASE NEW PLASTIC FENDERS. page 14 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) Trailer Assy. NO. PART NO. 1 29532 2 29478 3 29479 4 29542 5 29508 6 29572 7 7H0933325 8 9506 9# 10# 11# 12 29248 13 29249 15% 363180 16%@ 363913 17%@ 363908 18% 363188 19% 363259 20% 363258 21% 363257 22% 363275 23% 363277 24% 568067 25 19045 26 29194 27 29818 28 19266 29 10930 30 49048 31 29546 32 10176 33 915217 34$ 9502 35$ 9503 36$ 29718 37$ 29369 38$ 29228 39 29721 40 9505 41 0205 42 4001 43 10133 44 29476 45 UBK1741 46 49017 47 29784 PART NAME QTY. REMARKS FRAME 1 JACK, TOPWIND 10" BOLT-THRU .5 PIN 2 JACK, SIDEWIND 10" BOLT THRU 0.5" PIN 3 PIN, SPRING LOCK, .625" DIA. X .88" 2 OUTRIGGER, W/A, BOLT MOUNT, PAINTED 2 CHAIN ASM, SAFETY 7600 LB 2 BUSHING/LOCKNUT/BOLT 5 AXLE, SPRING,HUB ASSY,43",TRLR10 . ..............1.............INCLUDES ITEMS W/% U-BOLT....................................................................4.............NOT SOLD SEPARATELY PLATE, U-BOLT........................................................2.............NOT SOLD SEPARATELY NUT, U-BOLT............................................................8.............NOT SOLD SEPARATELY SCREW, HHC 9/16-18 2 NUT, 9/16-18 AXLE MOUNTING N-2 2 BEARING CONE (INNER & OUTER) 4 BEARING CUP (INNER & OUTER) 4 STUD, 1/2"-20 10 HUB ASSY., IDLER..................................................2.............INCLUDES ITEMS W/@ WASHER, SPINDLE 2 COTTER PIN 2 SPINDLE NUT 1"-1/4 2 SEAL, GREASE 2 GREASE CAP (AG) 2 RUBBER PLUG (AG) 2 WHEEL/TIRE ST175/80-13 L.R. C 2 NUT, LUG 1/2-20 10 FENDER, PLASTIC DLT 2 NUT, BLIND 1/4-20 X 10GA GRIP 6 WASHER, FENDER, 1/4 X 1-1/4 6 SCREW, HHFS 1/4-20 x 3/4 GR5 6 COUPLER, 2" BALL 2.50" TUBE 1 NUT, NYLOC 1/2-13 2 SCREW, HHC 1/2-13 x 3-1/2 GD8 YZ 2 BOLT, 5/8-11 2 NUT, 5/8-11 2 ADAPTER, COUPLING...........................................1.............CONTACT MQ UNIT SALES PINTLE EYE............................................................1.............CONTACT MQ UNIT SALES COUPLER, 2 IN. BALL 1 PINTLE KIT..............................................................1.............INCLUDES ITEMS W/$ FENDER, 8X30X13 , METAL 2 SCREW, HHC 3/8-16 X 1.0 8 WASHER, FLAT USS 3/8 PLD 16 NUT, NYLOC 3/8-16 8 BRACKET 2 U-BOLT KIT..............................................................2.............INCLUDES ITEMS W/# LEAF SPRING 2 HARNESS, TRLR, 48" LOOM 1 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 15 MAST ASSY. 37 44 33 33 32 25 30 2 11 26 10 35 21 30 16 9 32 22 20 36 2 10 16 30 43 A 31 28 34 29 2 38 24 21 14 12 35 14 10 13 3 42 37 NOTES: A SEE WINCH ASSY. page 16 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) MAST ASSY. NO. PART NO. 2 0183 3 0948 9 19200 10 19847 11 19882 12 19920 13 19923 14 35302 16 35300 20 19973 21 19974 22 19975 24 19977 25 19978 26 19988 28 29075 29 29114 30 29155 31 29652 31 29941 32 5070 B 33 5079 34 6014 B 35 8151 36 19939 37 19938 38 29664 39 1023 40 10136 41 21781 42 4387 43 29062 44 29650 PART NAME QTY. REMARKS PIN, COTTER 1/8D X 1-1/4 3 WASHER, FLAT SAE 1/4 1 THIMBLE, 3/16 WIRE 1 RIVET, POP, ALUM, 3/16x1/8-1/4 GRIP 16 SWIVEL, BASE W/A 1 TUBE, TW-MID W/A 1 TUBE, TWR TOP W/A 1 BLOCK, MAST SLIDE, 2 X 2 UPPER................ 4..........REPLACES 19926 AND 19927 BLOCK, MAST SLIDE, 3 X 3 LOWER............... 4..........REPLACES 19928 AND 19929 SWAGE, AL 3/16 2 PIN, CLEVIS 1/2 X 1.25 EFF 2 SHACKLE, ANCHOR CP 1 KNOB, CLAMP 1/2-13 THREAD 1 SCREW, HHC 3/4-10 x 6.5 1 PIN, CLEVIS 1/2 X 1.75 EFF 1 SCREW, HHC 1/2-13 X 1 DRILLED 1 WASHER, FENDER 1/2 x 2 MLT 1 SHEAVE, 2.00 OD X 0.500 ID 3 TUBE, BOTTOM TOWER W/A........................... 1..........S/N 903837 AND BELOW TUBE, BOTTOM TOWER W/A........................... 1..........S/N 903838 AND ABOVE NUT, NYLOC 3/4-10 2 WASHER, FLAT 3/4 USS 3 PIN, COTTER 3/32DX1.00 1 WASHER, FLAT SAE 3/4 2 CABLE, LOWER MAST..................................... 1..........231 IN. LENGTH CABLE, UPPPER MAST.................................... 2..........140 IN. LENGTH PIN, SPRING LOCK........................................... 1..........S/N 903837 AND BELOW HHC 3/8-16 X 1-1/4 GR5 3 WASHER, FLAT 3/8 SAE 3 NUT, FLANGED 3/8-16 SERRATED, PLATED... 3..........REPLACES 10133 SCREW, HHC 3/4-10 X 2-1/4 1 NUT, SLOTTED 1/2-13, NOT PLATED 1 MAST ASSY....................................................... 1..........S/N 903838 AND ABOVE .......................................................................................S/N 903837 AND BELOW NO LONGER .......................................................................................AVAILABLE. CONTACT PARTS DEPT FOR .......................................................................................REQUIRED REPLACEMENT PARTS LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 17 Mast raise/lower assy. 19 21 18 17 23 20 12 16 13 11 PART OF FRAME 14 15 10 9 8 7 6 5 1 A 2 4 NOTES: A SEE WINCH ASSY. page 18 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) Mast raise/lower assy. NO. 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 23 PART NO. 0205 10136 21781 1135 29008 29017 29018 29016 29155 10176 29077 29481 19989 9503 29033 19012 29482 20276 0183 19996 1450 PART NAME QTY. REMARKS SCREW, HHC 3/8-16 x 1 IN. PLATED 3 WASHER, FLAT 3/8 IN. 3 NUT, FLANGED 3/8-16 SERRATED, PLATED........3..........REPLACES 10133 SNAP RING 2 PIN, SWAGE BALL SOCKET 1 SCREW, HHC 1/2-13 x 5.5 IN. 1 SPACER, .75 OD x .5 ID x 1.59 IN. 2 GUIDE, WIRE ROPE 2 SHEAVE, 2 OD x .5 IN. ID 1 NUT, NYLOC 1/2-13 IN. 1 SCREW, HHC 5/8-11 x 9.5 IN. 1 STOP, MAST THRUST SPRING 1 SPRING, TOWER 1 NUT, NYLOC 5/8-11 IN. 1 TOWER, LOCK 1 LOCK PIN 5/16 x 2 IN. QUICK RELEASE 1 SPRING, .468 OD x 2.13 IN. 1 PIN, ROLL 1/4 x 1.75 IN. 1 PIN, COTTER 1/8D x 1-1/4 IN. 1 LANYARD 1 WASHER, FLAT SAE #6 1 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 19 winch ASSY. (fulton) CABLE 1 KEEPER KIT CABLE KEEPER KIT 3 2 RATCHET 23 KIT 27 26 25 1 6 INPUT SHAFT KIT 16 5 4 24 RATCHET KIT 23 7 17 28 29 34 27 10 25 11 26 12 13 24 8 14 18 13 17 INPUT 16 SHAFT KIT 19 9 15 22 INPUT SHAFT 16 KIT 21 20 19 33 33 35 INPUT SHAFT 16 KIT NOTES: A SEE MAST ASSY. page 20 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) winch ASSY. (fulton) NO. PART NO. 1+ 562101 2@+ 3@+ 4@+ 5@+ 6+ 7+ 8+ 29206 9+ 10+ 12124S01 11+ 12+ 13%+ 14+ 15+ 1564S01 16+ 1563S01 17#+ 18#+ 19#+ 20#+ 21#+ 22#+ 23+ 6730S00 24%+ 25%+ 26%+ 27%+ 28+ 29+ 33+ 1558S00 34+ 35 19976 PART NAME QTY. REMARKS CABLE KEEPER KIT..............................................2..........INCLUDES ITEM W/@ NUT 2 WASHER, LOCK 2 CABLE CLAMP 1 CARRIAGE BOLT 2 DRUM ASSY............................................................1..........SEE NOTICE BELOW DRUM SPACER......................................................1..........SEE NOTICE BELOW HANDLE ASSY. 1 LOCK NUT 1/2-13..................................................1..........STD. HDW. PURCHASE LOCALLY COVER ASSY 1 BOLT LOCK............................................................1..........SEE NOTICE BELOW CAP SCREW 1/2-13...............................................1..........STD. HDW. PURCHASE LOCALLY LOCK NUT 2 CAP SCREW 3/8-16...............................................1..........STD. HDW. PURCHASE LOCALLY INPUT SHAFT 1 KIT, INPUT SHAFT.................................................1..........INCLUDES ITEM W/# LOCK NUT 1/2-13 3 SPACER 1 BUSHING 2 SHAFT BRAKE DISC 1 RATCHET GEAR 1 PINION AND DISC 1 RATCHET KIT.........................................................2.......... INCLUDES ITEMS W/% RATCHET SPACER 2 RATCHET SPRING 2 RATCHET PAWL 2 SHOULDER BOLT 5/16-18 2 LOCK NUT 3/8-16..................................................1..........STD. HDW. PURCHASE LOCALLY FRAME...................................................................1..........SEE NOTICE BELOW FRICTION DISC KIT 2 FRAME SPACER....................................................1..........SEE NOTICE BELOW HAND WINCH 1200 LBS. COMPLETE ASSY.........1..........INCLUDES ITEMS W/+ NOTICE Sold only as a complete assembly. Use part number 19976 when ordering. LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 21 winch ASSY. (dutton-lainson) 6 1 3 5 9 8 2 4 14 13 16 14 12 4 17 15 18 19 20 21 22 23 24 16 25 27 A 26 NOTES: REFER TO MAST AND TRAILER A ASSEMBLIES FOR WINCH MOUNTING HARDWARE. page 22 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) winch ASSY. (dutton-lainson) NO. 1# 2# 3# 4# 5# 6# 6# 8# 9# 12# 13# 14# 15# 16# 17# 18# 19# 20# 21# 22# 23# 24# 25# 26# 27 PART NO. PART NAME QTY. REMARKS DL205167 BOLT 1 DL205055 WASHER 1 DL404409 PAWL 1 DL404166 SPACER 2 DL204363 SPRING 1 DL5240387 GEAR COVER, PAINTED BRONZE 1 DL5240403 GEAR COVER, PLATED 1 DL304755 REEL 1 DL304221 ROPE CLAMP KIT 1 DL204808 REEL SPACER 1 DL404891 BASE 1 DL204803 NUT 2 DL404579 LOCKOUT LEVER 1 DL204364 SPRING 2 DL205127 BOLT 1 DL204009 BUSHING 1 DL205116 E-RING 1 DL304760 DRIVE SHAFT 1 DL204362 PRESSURE PLATE 1 DL404164 RATCHET WHEEL 1 DL404163 PRESSURE WASHER 1 DL206328 BUSHING 1 29793 HANDLE 1 DL205033 NUT 1 29790 WINCH ASSEMBLY 1500A D-L..............................1..........INCLUDES ITEMS W/# LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 23 T-BAR ASSY. (s/n 901681 and below) 1 LIGHT 1 2 LIGHT 4 14 13 J1 J2 J3 J4 LIGHT 2 2 5 LIGHT 3 24 23 9 5 17 18 20 10 19 4 1 7 22 21 24 15 2 NOTES: 1 2 TO SECURE COIL CORD ASSEMBLY P/N 29433 INSERT CLIP P/N 11505 TO INSIDE OF TUBE AS SHOWN AND ROUTE CORD THROUGH OPENING OF CLIP. CONNECT THIS END OF COIL CORD ASSEMBLY TO BALLAST BOX. SEE COIL CORD ASSY. page 24 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) 11 T-BAR ASSY. (s/n 901681 and below) NO. 1 2 4 5 7 9 10 11 13 14 15 17 18 19 20 21 22 23 24 PART NO. 19249 5079 29738 19250 11505 10176 0447 3215 29161 29162 29042 19972 19945 19944 29046 19688 19687 19965 26560 PART NAME SCREW, HHC 3/4-16 x 4 FLAT WASHER, 3/4 MOUNT, LIGHT FIXTURE W/A NUT, NYLOC 3/4-16 x 4 CLIP, CABLE NUT, NYLOC 1/2-13 WASHER, FLAT, 1/2 SAE 2 SCREW, HHC 1/2-13 X 3-1/2 SCREW, HHC 1/2-13 X 1 SS WASHER, HS 1/2 SS RECEPTACLE, FEMALE (J1,J2,J3 & J4) REFLECTOR, RED PLATE, COVER GASKET, PLATE COVER SCREW, COVER PLATE INSULATOR, SPLICE CAP PLASTIC COPPER SPLICE CAP CORD GRIP (HUBBELL 07401017) NUT, LOCKING 3/4 NPT CONDUIT QTY. 2 4 1 2 2 2 2 2 4 4 4 1 1 1 6 6 6 1 5 REMARKS LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 25 T-BAR ASSY. (s/n 901682 and above) 3 1 2 21 20 22 18 19 2 9 3 20 3 13 4 16 5 14 15 11 1 7 NOTES: 1 TO SECURE COIL CORD ASSEMBLY P/N 29433 INSERT CLAMP P/N 11505 TO INSIDE OF TUBE AS SHOWN AND ROUTE CORD THROUGH OPENING OF CLIP. 2 CONNECT THIS END OF COIL CORD 2 ASSEMBLY TO BALLAST BOX. SEE COIL CORD ASSY. SPERO LAMP 3 SEE LAMP ASSY (S/N 901682 AND UP) page 26 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) T-BAR ASSY. (s/n 901682 and above) NO. 1 2 3 4 5 7 9 11 13 14 15 16 18 19 20 21 22 PART NO. 10306 13211 10176 26560 19965 11505 3254 06503-026 29781 29168 19687 19688 19945 19944 29046 29047 19972 PART NAME QTY. SCREW, HHC 1/2-13 X 4 1/2 2 WASHER, FLAT 1/2 IN. USS 8 NUT, NYLOC 1/2-13 4 NUT, LOCKING 3/4 NPT CONDUIT 1 CORD GRIP (HUBBELL 07401017) 1 CLAMP 1 TERMINAL, RING 16-14 3/8 IN. 1 SCREW, HHC 1/2-13 X 3-1/4 IN. 2 TEE-BAR, LIGHT MOUNT, MLT/DLT SPERO 1 RECEPTACLE ASSY 4 CRIMP, SLEEVE (30-410) 7 INSULATOR, SPLICE CAP (2007) 7 PLATE, T-BAR WIRING COVER 1 GASKET, T BAR 1 SCREW, PHPM 10-32 X 3/8 IN. ZINC 7 DECAL, HIGH VOLTAGE 1 REFLECTOR, RED, PETERSON #B491R 1 REMARKS LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 27 LAMP ASSY. (s/n 901681 and below) 32 7 6 WHITE 3 29 2 4 1 5 BLACK 8 31 30 9 22 11 CK GREEN 13 BLA 23 WHITE 24 25 28 21 26 2 27 10 19 33 18 2 17 LIGHT FIXTURE JUNCTION BOX 15 14 20 12 NOTES: INCLUDED WITH SOCKET/W 1 LEADS ASSEMBLY (ITEM 8). 2 INCLUDED WITH ITEM 20 page 28 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) LAMP assy. (s/n 901681 and below) NO. PART NO. 1% 43007020200 2% 2450108 3% 5550079 4% 29560 5% M1000U 6% 4101024 7% 4105012 8% A4605079 9% 70463 10% 2450120 11% 3100056 12% 29169 13% 4110624000 14% 6900446 15% 6900447 17% 4101021 18% 63960 19% 29162 20% 19695 21% 4107742000 22% 2856 23% 19688 24% 25% 2450121 26% 6351110 27% 6301045 28% 2450119 29% 4106781000 30% 4104021000 31% 4101023 32 29174 33% 29174HANDLE PART NAME QTY. REMARKS CLAMP, LIGHT........................................................ 4...............REPLACES 64167441 LENS GASKET....................................................... 4 .............REPLACES 64167100 LENS AND GASKET............................................... 4...............REPLACES 64167744 SUPPORT, TOP LAMP 1000 WATT........................ 4...............REPLACES 19823 BULB 4 REINFORCING RING 1 REFLECTOR (WITHOUT GLASS) 4 SOCKET W/LEADS................................................ 4...............REPLACES A4605079 SCREW, 10-24 X 5/8 BLACK 16 GASKET, HOUSING/REFLECTOR 4 FIXTURE HOUSING 4 CORD SET MOLDED 4 WASHER, 1/2 EXT. TOOTH SS 4 SEAL RING .755 ID 4 STRAIN RELIEF 4 TRUNION (YOKE) 4 SCREW, HHCS 1/2-13 X 1-1/4 4 WASHER, LOCK HS 1/2 SS 4 CONNECTOR, STRAIN RELIEF 5/8-3/4................ 4...............T&B 2535 SCREW, 6-32 X 3/8 4 TERMINAL, SPADE 16-14#8 INSUL....................... 4...............REPLACES 1272 INSULATOR, SPLICE CAP (PLASTIC) 4 CONNECTION BOX................................................ 4...............NO LONGER AVAILABLE O-RING .206" X 1.03" SILICON 4 WASHER, 1/4 X 1-1/4 OD X .63 GALV. 4 SCREW, 1/4-20 X 2" PH PH SS 4 O-RING, 1.925" ID X 1.03" 4 SCREW, 8-32 X 3/8 PH PH 8 POP RIVET 1/8 X 3/16 DOMED AL 8 BRACKET, SOCKET 4 LIGHT FIXTURE ASSY........................................... 1...............INCLUDES ITEMS W/% HANDLE, FLOODLIGHT 4 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 29 LAMP assy. (s/n 901682 and ABOVE) 29 28 27 23 15 26 25 30 18 OLD STYLE 17 19 16 NEW STYLE 24 19 11 21 15 10 1 12 9 22 5 8 2 5 3 6 7 4 page 30 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) LAMP assy. (s/n 901682 and ABOVE) NO. PART NO. PART NAME QTY. REMARKS 1% 20S-REF-1 REF1000 BODY ASSY. 1 2% 30M-REF-REF REFLECTOR, ALUMINUM 14-7/8 X 16-5/8 IN. 1 3% 190ZQREF REF 1000 LENS 190ZQREF 1 4% 170M-REF-5 REF LENS HOLD DOWN 2 5% 70Z-FSCR3 SCREW 8-32 X 1/2 IN. 8 6% 250-REF-6 YOKE, LIGHT FIXTURE 1 7% 260Z-FSCR9 BOLT, HEX HEAD 1/2-13 x 1-1/2 IN. 2 8% 280Z-FWFL2 WASHER, FLAT 1/2 IN. 4 9% 270Z-FNT4 NUT, HEX 1/2-13 IN. 2 10% Z-C-239 VAPORTITE OCTAGON BOX 1/2 IN. W/4 THREADED PLUGS G9 SILVER.................... 1...............NEW STYLE 11% 150Z-FSR3 STRAIN RELIEF SRW 1/2 IN. BLACK.................... 1...............NEW STYLE 12% Z-FSCR9 BOLT, HEX HEAD ZINC PLATED 1/2-13 X 1-1/2 IN. 2 15% 90Z-G-102 GASKET, HEX #5 OR #6 1 16% 70Z-SK65 MOGUL SOCKET W/ANTI-VIBRATION GASKET 1 17% MVR1000BT37 BULB, LIGHT FIXTURE 1 18% 50Z-D-REF-SUP SUPPORT, REF1000 LAMP TIP 1 19% 230Z-FNTL6-1 KEEP NUT 8-32 6 21% 210S-CBL-6 CABLE ASSEMBLY 1 22% 200ZG106 GASKET, U-CHANNEL REFLECTOR 200ZG106 1 23 29773 LIGHT FIXTURE ASSY........................................... 1...............INCLUDES ITEMS W/% 24% 150Z-EZ67 POWER CORD, 60" W/ 3-PIN MALE PLUG........... 1...............NEW STYLE 25 130Z-E76 CONDUIT BODY, 1/2 IN. HUB................................. 1...............OLD STYLE 26 100Z-C-93 FLANGE, #5 OR #6................................................ 1...............OLD STYLE 27 110Z-C-91 NUT, CAST #5 OR #6............................................. 1...............OLD STYLE 28 160Z-FSR3 FITTING, CONDUIT BODY 1/2 IN........................... 1...............OLD STYLE 29 150Z-E266 CORD SET, 36 IN. W/3-PIN MALE PLUG............... 1...............OLD STYLE 30 4106781000 SCREW, 8-32 X 3/8 2 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 31 CONTROL PANEL/BALLAST ASSY. (S/N 904384 AND BELOW) 25 1 2 26 27 4 5 24 23 4 6 3 22 28 3 16 21 4 11 7 8 17 18 13 15 14 9 12 20 19 10 34 33 38 52 27 50 32 39 35µF @425V 18µF @425V 40 41 53 42 PERKINS MODELS ONLY 18µF @425V 30 31 43 48 51 49 WIRING KIT 45 47 44 46 LOMBARDINI MODELS ONLY page 32 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) CONTROL PANEL/BALLAST ASSY. (S/N 904384 AND BELOW) NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30@ 31 32 33 34 38 39 40 41 42 43 44 44 45 45 46 47 48 49 50@ 51 52 53 PART NO. 15177 29647 10019 5065 B 29276 29646 29343 1623 19968 29071 1618 0205 W29109 0166 A 1876 29640 19297 19819 1450 29688 29376 19223 29603 29607 0131 A 0181 B 0948 19266 12287 19598 10434 10024 29655 10237 100AC 385201161 385210060 390190030 15177 12851652 12850033 50384401 12850033KEY 50404900 21611 0948 29761 29675 M1000120AC5M 19229 GECAP35MF GECAP18MF PART NAME QTY. REMARKS SCREW, PAN HEAD 10-32 X 1 4 COVER, 220 OUTLET COOPER P/N 1990 1 NUT, NYLOC 10-32 9 SCREW, RHM #10-32 x 0.5 5 RECEPTACLE, 4PRG LOCKING 30A, 120/250V 1 COVER, 110 GFI OUTLET COOPER P/N 2966 1 DUPLEX OUTLET, 15A 120V GFCI UL CSA 1 SCREW, RHM #10-24 x 0.75 2 TERMINAL BLOCK ( DC 70014 ) 1 CONNECTOR, QUICK SCREW TERMINAL 3 NUT, NYLOC 10-24 2 SCREW, HHC 3/8-16 X 1 PLATED 1 NUT, WING 3/8-16 1 WASHER, LOCK, 3/8 MED. 1 NUT, HEX FINISH 3/8-16 1 HOUR METER, SENDEC RECT FLUSH MOUNT 1 LIGHT, PETERSON MFG V438 1 SCREW, PHP #6-32 x 0.25 14 WASHER, FLAT #6 SAE 14 CIRCUIT BREAKER, 120VAC 10A DLT LIGHT 4 CIRCUIT BREAKER, 15A, 227 VAC KD-1800 1 30 A 277 V CIRCUIT BREAKER 1 SWITCH, MOMENTARY OFF COLE HERSEE 9075 1 BRACKET, LIGHT SWITCH DLT 1 SCREW, HHC 1/4-20 X 3/4 IN. 2 WASHER, LOCK 1/4 IN. MED 2 WASHER, FLAT SAE 1/4 10 NUT, BLIND 1/4-20 X 10 GA 32 SCREW, THP 1/4-20 X 3/4 SS 8 BALLAST CAPACITOR 24 µF @480V 4 CLAMP, HOSE WORM 1-9/16 TO 2 SIZE 32 4 NUT, NYLOC 1/4-20 8 FITTING, STRAIN RELIEF HEYCO 3234 3 WASHER, EXT. SHKP #10 3 CONTROL PANEL, PERKINS ENGINE 1 IGNITION SWITCH W/KEY, PERKINS.......................................... 1.............. INCLUDES ITEMS W/% KEY, IGNITION, PERKINS 1 PLATE, IGNITION SWITCH 1 SCREW PHP 10-32 X 1 4 CONTROL PANEL, DEUTZ/LOMBARDINI ENGINE 1 IGNITION SWITCH W/KEY, DEUTZ, SINGLE-SIDED 1 IGNITION SWITCH, DOUBLE-SIDED 1 KEY, IGNITION, SINGLE-SIDED 1 KEY, IGNITION, DOUBLE-SIDED 1 SCREW THP 1/4-20 X 5/8 SS 4 WASHER, FLAT SAE 1/4 4 MOUNTING PLATE, CONTROL PANEL 1 WIRING KIT, DLT FOR BALLAST 1 BALLAST/TRANSFORMER 60HZ 4 BALLAST/CAPACITOR, M47 60HZ............................................... 4.............. INCLUDES ITEMS W/@ EXCITATION CAPACITOR 35 µF @425V...................................... 1.............. S/N 902148 AND BELOW EXCITATION CAPACITOR 18 µF @425V...................................... 2.............. S/N 902148 AND BELOW LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 33 CONTROL PANEL/BALLAST ASSY. (S/N 904385 AND ABOVE) 20 19 21 22 6 6 39 6 40 14 24 18 41 7 31 15 8 6 7 12 1 13 25 4 2 20 34 16 1 9 35 5 33 36 11 21 36 28 48 10 13 43 29 WIRING KIT 12 44 42 10 7 A 32 23 6 NOTES LIGHT SWITCH BRACKET. 1 SEE CABINET ASSY. 47 43 3 42 45 9 page 34 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) CONTROL PANEL/BALLAST ASSY. (S/N 904385 AND ABOVE) NO. 1 2 3 4 5 6 7 8 9 10% 11 12 13 14 15 16 18 19 20 21 22 23 24 25 28 29 31 32 33 34% 35% 36% 39 40@ 41@ 42 43 44 45 47 48 PART NO. 0166 A 0205 0655 1876 2574 8133 10019 12277 49048 19266 19297 19968 29071 29276 29343 29603 29646 29647 29655 29656 29712 29796 29797 W29109 49046 49047 49070 49071 29865 29864 29848 29847 19229 M1000120AC5M 19598 29719 29795 7245454 50404900 50384401 GECAP25MF PART NAME QTY. REMARKS WASHER, LOCK, 3/8 MED. 1 SCREW, HHC 3/8-16 X 1 PLATED 1 SCREW, HHC 5/16-18 1 NUT, HEX FINISH 3/8-16 1 GROMMET, 5/16" ID 7/16" OD 1 SCREW, PHP 10-32 X 3/4 12 NUT, NYLOC 10-32 6 CLAMP, HOSE WORM 1-9/16 TO 2 SIZE 32 4 SCREW, HHFS 1/4-20 X 3/4 G5 8 NUT, BLIND 1/4-20 X 10 GA 8 LIGHT, PETERSON MFG V438 1 TERMINAL BLOCK ( DC 70014 ) 2 CONNECTOR, QUICK SCREW TERMINAL 4 RECEPTACLE, 4PRG LOCKING 30A, 120/250V 1 DUPLEX OUTLET, 15A 120V GFCI UL CSA 1 SWITCH, MOMENTARY 1 COVER, 110 GFI OUTLET 1 COVER, 220 OUTLET 1 FITTING, STRAIN RELIEF HEYCO 3234 2 LOCKNUT, NYLON 2 BOLT, CARRIAGE 1/4-20 X 3/4 8 CLAMP, CUSHIONED LOOP, 1-3/4 DIA X1 1 NUT, BLIND 10-32 X 02/.13 GRIP 6 NUT, WING 3/8-16 1 HARNESS, LT-12 CONTROL (AC) 1 WIRING KIT, LT-12 1 NUT, FLANGED 1/4-20 SERATED PLTD 8 NUT, FLANGED 5/16-18 SERATED PLTD 1 SNAP SWITCH PLATE ASSY............................................1............ INCLUDES ITEMS W/% SNAP FIT SWITCH INSERT 1 CIRCUIT BREAKER, 2 POLE, 30A SNAP FIT.................1............ S/N 902626 AND ABOVE CIRCUIT BREAKER, 1 POLE, 15A SNAP FIT 5 BALLAST AND CAPACITOR, M47....................................4............ INCLUDES ITEMS W/@ BALLAST/TRANSFORMER 60 HZ 4 BALLAST CAPACITOR 24 µF @480 V 4 SCREW HHC M5-.8 X 8MM PLATED, 8.8 DIN 8 BRACKET, DEUTZ CONTROL PANEL 2 CONTROL PANEL, LOMBARDINI 1 KEYS, IGNITION, DOUBLE-SIDED 2 IGNITION SWITCH 1 EXCITATION CAPACITOR 25µF @425V..........................1............ S/N 902149 AND ABOVE LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 35 Fuel Tank Assy. 4 3 1 A 5 6 2 5 8 7 9 10 13 11 TO ENGINE 11 11 NOTES: RETURN FROM ENGINE A 11 12 FUEL TANK ASSY., ITEM 1 INCLUDES ITEMS WITHIN DASHED LINES. B B CLAMP, ITEM 11 IS INCLUDED WITH FUEL TANK ASSY. ITEM 1. page 36 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) Fuel Tank Assy. NO. 1 2# 3# 4 5# 6# 7# 7# 8# 9 10 11 12 13 PART NO. 29676 29605 29694 29674 19633 12006 29677 20795 19661 0447 10176 22066 60028 60004 PART NAME QTY. REMARKS FUEL TANK ASSY.................................................................. 1................ INCLUDES ITEMS W/# FUEL TANK 1 CAP, FUEL TANK W/LANYARD 1 STRAP, FUEL TANK 1 BUSHING, FUEL 3 FITTING, 90° 1 FITTING, 90°......................................................................... 1................ S/N 904605 AND BELOW VALVE, SHUTOFF 4MBARB X 6SBARB SCREEN.............. 1................ S/N 904306 AND ABOVE VALVE, SHUTOFF 5BARB X 6SBARB NO SCREEN 1 WASHER, FLAT 2 NUT, NYLOCK 1/2-13 2 CLAMP, STEPLESS EAR 3/16 HOSE #123 4 HOSE, FUEL RETURN .312 ID SAE J30R7 AR 1PC = 1 FT. HOSE, FUEL LINE .187 I.D. SAE J30R7 AR 1PC = 1 FT. LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 37 Battery Assy. 2 BLACK 3 RED 1 4 CONNECT TO CHASSIS GND. CONNECT TO STARTER SOLENOID 5 6 2 page 38 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) Battery Assy. NO. 1 1 2 3 4 5 6 PART NO. 29693 10313 29661 12278 10315 1623 2203 PART NAME QTY. REMARKS CABLE, POS. BATTERY (+)..................... 1................PERKINS ENGINES ONLY CABLE, POS. BATTERY (+)..................... 1................DEUTZ/LOMBARDINI ENGINES BATTERY TRAY 1 CABLE, NEG. BATTERY (-) 1 BATTERY, WET 12V GR22 1 SCREW, RHM #10-24 x .75 IN. 4 WASHER, FLAT #10 4 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 39 ENGINE Assy. (pERKINS) 6 19 5 4 7 3 2 11 1 8 10 9 12 15 13 16 14 18 page 40 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) 17 ENGINE Assy. (pERKINS) NO. PART NO. 1 145016474 2 145996660 3 145996650 4 145206210 5 145996590 6 140517000 7 26560017 8 185086610 9 185046160 10 80109049 11 185246060 12 385720101 13 36510362 14 24850072 15 3483H043 16 3483H034 17 385201160 18 385210060 19 PART NAME QTY. REMARKS WATER PUMP 1 JOINT, GASKET 1 JOINT, GASKET 1 THERMOSTAT 1 SEAL, THERMOSTAT 1 FILTER, OIL 1 FILTER ELEMENT KIT, FUEL 1 STARTER ASSY 1 ALTERNATOR 1 VBELT, FAN 1 SWITCH, OIL 1 SENDER, OIL 1 ELEMENT, AIR FILTER 1 CAP, RADIATOR 1 HOSE, RADIATOR LOWER 1 HOSE, RADIATOR UPPER 1 SWITCH, IGNITION 1 KEY, IGNITION 1 ENGINE, PERKINS 103-10 DIESEL........ 1.................. NO LONGER AVAILABLE LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 41 ENGINE Assy. (DEUTZ/LOMBARDINI) 17 18 20 2 9 19 14 15 16 13 15 12 14 13 4 10 11 28 27 26 22 6 8 23 24 25 29 21 7 3 1 page 42 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) ENGINE Assy. (DEUTZ/LOMBARDINI) NO. 1 1 1 2 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 17 18 19 20 21 22 23 24 25 26 27 28 29 PART NO. 12850347 2175046 2175143S 2175107 12850312 5840224 12850745 12851312 12850362 12850649 5460450 10855 29645 29937 21584 0161 C 29938 2299 29644 29699 9000184 7350270 12850742 2440338 6585097 1200087 6584438 4580083 6745056 9195124 12850153 12850551 PART NAME QTY. REMARKS FUEL FILTER 2-3/4" L 1 FUEL FILTER 4-3/4" L 1 FUEL FILTER W/WATER DRAIN 1 OIL FILTER................................................................. 1..........LOMBARDINI OIL FILTER................................................................. 1..........DEUTZ STARTER 1 FAN BELT 875MM 1 AIR FILTER 1 LOWER RADIATOR HOSE 1 UPPER RADIATOR HOSE 1 MUFFLER 1 CLAMP, 1-1/2 MUFFLER 1 EXHAUST PIPE 1 BRACE, LOWER MUFFLER 1 BOLT M10-1.5P X 35MM 2 WASHER, LOCK 5/16 MED 2 SPACER, MUFFLER BRACKET, 3/8 X 3/4 X 5/8 2 BOLT, M8-1.25P X 16MM 1 ENGINE, LOMBARDINI LDW1003 1 ENGINE, DEUTZ F3M1008F DIESEL 1 RADIATOR CAP 1 RADIATOR 1 ALTERNATOR 1 TIMING BELT 1 FUEL (FEED) PUMP 1 GASKET, FUEL (FEED) PUMP) 1 WATER PUMP 1 GASKET, WATER PUMP 1 OIL SWITCH 1 THERMOSTAT 1 GASKET, THERMOSTAT 1 COOLING FAN 1 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 43 Generator/engine mounting assy. (Perkins) 5 3 4 2 10 6 13 9 11 12 15 13 10 13 14 13 14 page 44 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) Generator/engine mounting assy. (Perkins) NO. 2 3 4 5 6 9 10 11 12 13 14 PART NO. 0161 C 0655 0166 A 1023 1023 29684 29649 19470 9182 4001 10133 PART NAME QTY. WASHER, LOCK 5/16 MED 6 SCREW, HHC 5/16-18 x .75 6 WASHER, LOCK 3/8 MED 8 SCREW, HHC 3.8-16 x 1-1/4 GR 5 8 SCREW, HHC 3/8-16 X 1 1/4 GR 5 1 SUPPORT, MECC ALTE GENERATOR 1 MOUNT, VIBRATION KORFUND RB1-200 4 WASHER, FLAT 5/16 USS 2 SCREW, HHC M8-1.25 X 45MM PLATED 2 WASHER, FLAT USS 3/8 PLD 6 NUT, NYLOC 3/8-16 3 REMARKS LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 45 Generator/engine mounting assy. (old style deutz/lombardini) 2 18 13 3 30 1 11 5 18 21 MOUNTING RETROFIT KIT 4 4 11 12 2 11 11 18 11 2 11 12 1 11 12 1 17 11 23 28 10 26 2 12 7 11 7 10 15 15 11 20 10 21 26 24 27 4 14 29 5 6 7 9 NOTES 8 10 1 24 3 25 2 3 ROUND GENERATOR MOUNTING CONFIGURATION S/N 902149 TO 904547 WHEN REPLACING MOUNTING HARDWARE, USE ITEM 30, MOUNTING RETROFIT KIT. SQUARE GENERATOR MOUNTING CONFIGURATION S/N 902148 AND BELOW INCLUDED WITH ITEM 23, TORQUE LIMITER KIT page 46 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) Generator/engine mounting assy. (old style deutz/lombardini) NO. PART NO. 1 29770 2 1023 2 1023 3 21584 4 8156 4 8156 5 0655 5 0655 6 29269 7 19470 7 19470 8 5283 9 29043001 10 10133 10 10133 11 4001 11 4001 12 29649 13 1456 14 15 9182 17 10355 18 0166 A 18 0166 A 20% 29883 21% 1456 23 29884 24% 4001 25% 10133 26% 0166 A 27% 29649 28% 21584 29 30 49064 PART NAME QTY. REMARKS SUPPORT, MECC ALTE GEN 1 SCREW, HHC 3/8-16 X 1 1/4 GR 5 . .................9...............SQUARE GEN. SCREW, HHC 3/8-16 X 1 1/4 GR 5 . .................8...............ROUND GEN. SCREW, HHC M10-1.5 X 35MM GR 10.9 . .......1...............ROUND GEN. SCREW, HHC 3/8-16 X 2 1/2 ............................2...............SQUARE GEN. SCREW, HHC 3/8-16 X 2 1/2 ............................4...............ROUND GEN. SCREW, HHC 5/16-18 X 3/4 ............................10..............SQUARE GEN. SCREW, HHC 5/16-18 X 3/4 .............................4...............ROUND GEN. MOUNT, VIBRATORY ENGINE 2 WASHER, FLAT 5/16 USS ................................6...............SQUARE GEN. WASHER, FLAT 5/16 USS ................................4...............ROUND GEN. NUT, NYLOC 5/16-18 4 WHEEL, POINTER .41IDx2.00OD C.SAW 2 NUT, NYLOC 3/8-16 ..........................................3...............SQUARE GEN. NUT, NYLOC 3/8-16 ..........................................4...............ROUND GEN. WASHER, FLAT USS 3/8 PLD ..........................2...............SQUARE GEN. WASHER, FLAT USS 3/8 PLD ..........................8...............ROUND GEN. MOUNT, VIBRATION KORFUND RB1-200 2 NUT, HEX FINISH 3/8-16 6 MOUNT, FRONT ENGINE..................................1...............SUPPLIED BY VENDOR SCREW, HHC M8-1.25 X 45MM .......................2...............SQUARE GEN. NUT, M10-1.5 ....................................................1...............ROUND GEN. WASHER, LOCK, 3/8 MED. . .............................8...............SQUARE GEN. WASHER, LOCK, 3/8 MED. . ............................14..............ROUND GEN. TORQUE ROD...................................................1...............S/N 902141-902913 NUT, HEX FINISH 3/8-16 ..................................1...............S/N 902141-902913 Torque Limiter Kit.......................................1...............includes items w/% ............................................................................................S/N 902141-902913 WASHER, FLAT USS 3/8 PLD ..........................2...............S/N 902141-902913 NUT, NYLOC 3/8-16 ..........................................1...............S/N 902141-902913 WASHER, LOCK, 3/8 MED. . .............................2...............S/N 902141-902913 MOUNT, VIBRATION KORFUND RB1-200........1...............S/N 902141-902913 SCREW, HHC M10-1.5 X 35MM GR 10.9..........1...............S/N 902141-902913 SCREW..............................................................2...............SUPPLIED BY VENDOR MOUNTING RETROFIT KIT..............................1...............S/N 902149-904547 ............................................................................................CONTACT TECH SUPPORT FOR ............................................................................................INSTALLATION INSTRUCTIONS LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 47 Generator/engine mounting assy. (deutz/lombardini S/N 904548 AND ABOVE) 12 13 11 1 3 2 4 4 14 2 3 1 15 4 5 5 6 9 6 7 9 8 10 7 8 10 page 48 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) Generator/engine mounting assy. (deutz/lombardini S/N 904548 AND ABOVE) NO. PART NO. 1 49003 2 17099 3 5054 A 4 8156 5 0655 6 29269 7 19470 8 5283 9 29043001 10 10133 11 1456 12 1023 13 0166 A 14 15 PART NAME QTY. REMARKS MOUNT, REAR ENGINE 2 SCREW, HHC M12-1.75 X 20 ZN, DIN933 4 WASHER, LOCK 1/2 MED 4 SCREW, HHC 3/8-16 X 2 1/2 4 SCREW, HHC 5/16-18 X 3/4 8 MOUNT, VIBRATORY ENGINE 4 WASHER, FLAT 5/16 USS 8 NUT, NYLOC 5/16-18 8 WHEEL, POINTER .41IDx2.00OD C.SAW 4 NUT, NYLOC 3/8-16 4 NUT, HEX FINISH 3/8-16 6 SCREW, HHC 3/8-16 X 1 1/4 GR 5 8 WASHER, LOCK, 3/8 MED. 14 MOUNT, FRONT ENGINE..................................1...............SUPPLIED BY VENDOR SCREW..............................................................2...............SUPPLIED BY VENDOR LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 49 Generator assy. (S/N 902148 AND BELOW) 1 9 15 14 2 10 5 3 16 11 7 6 4 8 17 page 50 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) Generator assy. (S/N 902148 AND BELOW) NO. PART NO. 1 2# 0390302207 3# 4500491504 4# 0391700135 5# 4500561290 6#% 7#% 8# 9# 0390601031 10#% 11# 6110611180 11# 6110611182 14# 9909512155 14# 9903905132 15# 6102332037 16# 0391802005 17# 9910359005 PART NAME QTY. REMARKS GENERATOR ASSY............................. 1............... NO LONGER AVAILABLE. ............................................................................. CONTACT PARTS DEPT. FOR REQUIRED ............................................................................. REPLACEMENT PARTS ............................................................................. INCLUDES ITEMS W/# COVER, REAR 1 STATOR 130/4 1 COVER, FRONT 1 ROTOR 130/4...................................... 1............... INCLUDES ITEMS W/% FAN 1 BEARING, REAR 1 BOLT, COVER SECURING.................. 4............... OBTAIN LOCALLY BAND, PROTECTION IP23 1 HUB, COUPLING 1 DISC PLATE SAE 6,5 3 DISC PLATE SAE 7,5 3 LOCKING BAND, PLASTIC 130/4 1 LOCKING BAND, METAL 130/4 1 FLANGE, INTERCHANGEABLE 1 PLUG, TERMINAL BOX 1 DIODE................................................. 1............... NOT SHOWN LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 51 Generator assy. (S/N 902149 AND ABOVE) 20 2 3 21 4 1 7 5 8 6 9 19 15 18 2 17 16 13 11 5 10 12 page 52 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) Generator assy. (S/N 902149 AND ABOVE) NO. 1% 2% 3% 4% 5% 6% 7% 8% 9% 10% 11% 12% 13% 15% 16% 17% 18% 19% 20 21% PART NO. 9903905068 9903905069 9909510155 9909510195 GELT3100ROD 6102204175 GELT3ENCBAND GELT3100STATOR60 6102208192 6102208193 6110611508 GEECO3DISC65 7502223039 GELT3100ROTOR60 9910359005 7501001015 9909527011 9900905055 29895 29895SCREW PART NAME QTY. REMARKS REAR SEAL 1 LIFTING HOOK 2 PG21 CABLE GLAND 1 PG21 NUT 1 COVER STAY BOLT AND NUT 4 NON-DRIVE END BRACKET 1 ENCLOSING BAND 1 WOUND STATOR AND FRAME 1 DRIVE END BRACKET 1 INTERCHANGEABLE FLANGE 1 RING SPACER 1 FLEXIBLE DISC 1 FAN 1 ROTOR ASSY 1 DIODES 2 HEAT SINK, ROTATING DIODE BRIDGE 2 SUPPORT, ROTATING DIODE BRIDGE 1 REAR BEARING 6205-2RS 1 GENERATOR LT3...........................................1.......... INCLUDES ITEMS W/% Cover screws, set of 3 1 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 53 cOIL cORD assy. CONNECT TO T-BAR ASSEMBLY GREEN WHITE BROWN YELLOW BLACK RED 4 BLUE 7 1 1 2 2 4 3 5 NOTES: 3 4 3 5 ITEM 1, P/N 29433 (7-WIRE COIL CORD ASSY.), 1 REPLACES P/N 19955 (6-WIRE COIL CORD ASSY.). WHEN REPLACING 6-WIRE COIL CORD REFERENCE 2 ELECTRICAL SCHEMATIC DIAGRAM IN OPERATION MANUAL OR CONTACT MQ SERVICE DEPT. CONNECT THIS END OF COIL CORD ASSY. TO 3 BALLAST BOX. REFERENCE ELECTRICAL CONNECT TO BALLAST BOX OUTPUT 5 4 6 SCHEMATIC DIAGRAM IN OPERATION MANUAL. CONNECT THIS END OF COIL CORD ASSY. TO 4 T-BAR ASSY. REFERENCE ELECTRICAL SCHEMATIC DIAGRAM IN OPERATION MANUAL. page 54 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) cOIL cORD assy. NO. 1 2# 3# 4# 5# 6# 7# PART NO. 29433 3254 11947 19687 19688 19957 49030 PART NAME QTY. REMARKS COIL CORD ASSY..............................................1...............INCLUDES ITEMS W/# TERMINAL, RING 16-14 3/8 1 TERMINAL, FEM 16-14 PUSH-ON, INS 4 CRIMP, SLEEVE (30-410) 7 INSULATOR, SPLICE CAP 7 TERMINAL, SPADE 16-14, #10 INS 2 COIL CORD , 600V, 7-WIRE 1 LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 55 Terms and Conditions of Sale — Parts paYmenT TermS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SpeCiaL eXpeDiTing ServiCe Terms of payment for parts are net 30 days. FreigHT pOLiCY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiquip’s responsibility ceases when a signed manifest has been obtained from the carrier, and any claim for shortage or damage must be settled between the consignee and the carrier. b. minimum OrDer The minimum charge for orders from Multiquip is $15.00 net. Customers will be asked for instructions regarding handling of orders not meeting this requirement. reTurneD gOODS pOLiCY Return shipments will be accepted and credit will be allowed, subject to the following provisions: 1. A Returned Material Authorization must be approved by Multiquip prior to shipment. 2. Obsolete parts. (If an item is in the price book and shows as being replaced by another item, it is obsolete.) Any parts with a limited shelf life (such as gaskets, seals, “O” rings, and other rubber parts) that were purchased more than six months prior to the return date. c. Any line item with an extended dealer net price of less than $5.00. d. Special order items. e. Electrical components. f. Paint, chemicals, and lubricants. g. Decals and paper products. h. Items purchased in kits. 7. The sender will be notified of any material received that is not acceptable. To obtain a Return Material Authorization, a list must be provided to Multiquip Parts Sales that defines item numbers, quantities, and descriptions of the items to be returned. 8. Such material will be held for five working days from notification, pending instructions. If a reply is not received within five days, the material will be returned to the sender at his expense. a. The parts numbers and descriptions must match the current parts price list. 9. b. The list must be typed or computer generated. Credit on returned parts will be issued at dealer net price at time of the original purchase, less a 15% restocking charge. c. The list must state the reason(s) for the return. d. The list must reference the sales order(s) or invoice (s) under which the items were originally purchased. e. The list must include the name and phone number of the person requesting the RMA. 3. A copy of the Return Material Authorization must accompany the return shipment. 4. Freight is at the sender’s expense. All parts must be returned freight prepaid to Multiquip’s designated receiving point. 10. In cases where an item is accepted, for which the original purchase document can not be determined, the price will be based on the list price that was effective twelve months prior to the RMA date. A $35.00 surcharge will be added to the invoice for special handling including bus shipments, insured parcel post or in cases where Multiquip must personally deliver the parts to the carrier. LimiTaTiOnS OF SeLLer’S LiaBiLiTY Multiquip shall not be liable hereunder for damages in excess of the purchase price of the item with respect to which damages are claimed, and in no event shall Multiquip be liable for loss of profit or good will or for any other special, consequential or incidental damages. LimiTaTiOn OF WarranTieS No warranties, express or implied, are made in connection with the sale of parts or trade accessories nor as to any engine not manufactured by Multiquip. Such warranties made in connection with the sale of new, complete units are made exclusively by a statement of warranty packaged with such units, and Multiquip neither assumes nor authorizes any person to assume for it any other obligation or liability whatever in connection with the sale of its products. Apart from such written statement of warranty, there are no warranties, express, implied or statutory, which extend beyond the description of the products on the face hereof. Effective: February 22, 2006 11. Credit issued will be applied to future purchases only. priCing anD reBaTeS Prices are subject to change without prior notice. Price changes are effective on a specific date and all orders received on or after that date will be billed at the revised price. Rebates for price declines and added charges for price increases will not be made for stock on hand at the time of any price change. page 56 — LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) notes LT12 Series LIGHT TOWER • parts manual — rev. #17 (06/03/11) — page 57 Parts Manual HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United StateS Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Service Department 800-421-1244 310-537-3700 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department Fax: 310-537-4259 800-421-1244 310-537-3700 Fax: 310-943-2249 Technical Assistance 800-478-1244 Fax: 310-943-2238 mexico United Kingdom MQ Cipsa Multiquip (UK) Limited Head Office Carr. Fed. Mexico-Puebla KM 126.5 Momoxpan, Cholula, Puebla 72760 Mexico Contact: pmastretta@cipsa.com.mx Tel: (52) 222-225-9900 Fax: (52) 222-285-0420 Unit 2, Northpoint Industrial Estate, Globe Lane, Dukinfield, Cheshire SK16 4UJ Contact: sales@multiquip.co.uk Tel: 0161 339 2223 Fax: 0161 339 3226 Canada Multiquip 4110 Industriel Boul. Laval, Quebec, Canada H7L 6V3 Contact: jmartin@multiquip.com Tel: (450) 625-2244 Tel: (877) 963-4411 Fax: (450) 625-8664 © COPYRIGHT 2011, MULTIQUIP INC. Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission. This manual MUsT accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold. The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published in this publication at any time without notice and without incurring any obligations. Your Local Dealer is:
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18 Instance ID : uuid:cf9102b2-8f89-4642-9a50-2e072c3baed0 Document ID : xmp.did:B20E0420168EE01187B8DF44AC134705 Original Document ID : adobe:docid:indd:a20ed038-e70f-11dd-a41f-d974a8b8f220 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:B10E0420168EE01187B8DF44AC134705 Derived From Document ID : xmp.did:FDA159D92078E01194BDD7CE9BBAA80A Derived From Original Document ID: adobe:docid:indd:a20ed038-e70f-11dd-a41f-d974a8b8f220 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:B1A1B220217BDF1181EEAFA259D20437, xmp.iid:B2A1B220217BDF1181EEAFA259D20437, xmp.iid:B3A1B220217BDF1181EEAFA259D20437, xmp.iid:B4A1B220217BDF1181EEAFA259D20437, xmp.iid:280C006190D0DF118FE8F1BFABA73FB5, xmp.iid:290C006190D0DF118FE8F1BFABA73FB5, xmp.iid:2A0C006190D0DF118FE8F1BFABA73FB5, xmp.iid:8C4A5DD4A351E0119D7EDAE82FD4CD97, xmp.iid:8D4A5DD4A351E0119D7EDAE82FD4CD97, xmp.iid:8E4A5DD4A351E0119D7EDAE82FD4CD97, xmp.iid:8F4A5DD4A351E0119D7EDAE82FD4CD97, xmp.iid:904A5DD4A351E0119D7EDAE82FD4CD97, xmp.iid:FCA159D92078E01194BDD7CE9BBAA80A, xmp.iid:FDA159D92078E01194BDD7CE9BBAA80A, xmp.iid:FEA159D92078E01194BDD7CE9BBAA80A, xmp.iid:FFA159D92078E01194BDD7CE9BBAA80A, xmp.iid:00A259D92078E01194BDD7CE9BBAA80A, xmp.iid:B10E0420168EE01187B8DF44AC134705, xmp.iid:B20E0420168EE01187B8DF44AC134705, xmp.iid:B30E0420168EE01187B8DF44AC134705 History When : 2010:06:18 14:33:25-07:00, 2010:06:18 14:33:25-07:00, 2010:06:18 14:35:31-07:00, 2010:06:18 14:38:26-07:00, 2010:10:05 08:21:44-07:00, 2010:10:05 08:21:44-07:00, 2010:10:05 08:29:08-07:00, 2011:03:18 14:14:43-07:00, 2011:03:18 14:14:44-07:00, 2011:03:18 14:15:14-07:00, 2011:03:18 14:15:50-07:00, 2011:03:18 14:17:26-07:00, 2011:05:06 13:52:59-07:00, 2011:05:06 13:52:59-07:00, 2011:05:06 13:53:53-07:00, 2011:05:06 13:54:34-07:00, 2011:05:06 13:56:24-07:00, 2011:06:03 12:58:27-07:00, 2011:06:03 12:58:27-07:00, 2011:06:03 13:06:23-07:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, / Manifest Link Form : ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches Manifest Reference Instance ID : uuid:7fde9e8b-5d40-45ba-b1fd-d1011199c5ba, uuid:7d607b98-7406-4fef-b793-c063dcd30420 Manifest Reference Document ID : uuid:e502650f-2eb1-4032-8b50-dea0fd6a5163, uuid:944b75e8-c7e2-4add-93ae-d161f420a37b Create Date : 2011:06:03 13:11:08-07:00 Modify Date : 2011:06:03 13:11:45-07:00 Metadata Date : 2011:06:03 13:11:45-07:00 Creator Tool : Adobe InDesign CS4 (6.0.6) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 10437 bytes, use -b option to extract) Doc Change Count : 180 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 58 Creator : Adobe InDesign CS4 (6.0.6)EXIF Metadata provided by EXIF.tools